[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000006fd90000 (usable) [ 0.000000] BIOS-e820: 000000006fd90000 - 000000006fda0000 (ACPI data) [ 0.000000] BIOS-e820: 000000006fda0000 - 000000006fda1000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000006fda1000 - 0000000070000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x6fd90 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 040000000 mask FE0000000 write-back [ 0.000000] 2 base 060000000 mask FF0000000 write-back [ 0.000000] 3 base 06FE00000 mask FFFE00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009dc00 (usable) [ 0.000000] modified: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] modified: 00000000000dc000 - 00000000000e0000 (reserved) [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000006fd90000 (usable) [ 0.000000] modified: 000000006fd90000 - 000000006fda0000 (ACPI data) [ 0.000000] modified: 000000006fda0000 - 000000006fda1000 (ACPI NVS) [ 0.000000] modified: 000000006fda1000 - 0000000070000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 378a4000 - 37fef435 [ 0.000000] Allocated new RAMDISK: 008ad000 - 00ff8435 [ 0.000000] Move RAMDISK from 00000000378a4000 - 0000000037fef434 to 008ad000 - 00ff8434 [ 0.000000] ACPI: RSDP 000f88d0 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT 6fd9891f 00064 (v01 FSC PC 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 6fd9fcc4 000F4 (v03 SiS 671MX 06040000 PTL 000F4240) [ 0.000000] ACPI: DSDT 6fd9c1e9 03A67 (v01 IEC___ Z17M2.0_ 06040000 MSFT 03000000) [ 0.000000] ACPI: FACS 6fda0fc0 00040 [ 0.000000] ACPI: SLIC 6fd9fdb8 00176 (v01 FSC PC 06040000 PTL_ 00000000) [ 0.000000] ACPI: APIC 6fd9ff2e 0005E (v01 PTLTD APIC 06040000 LTP 00000000) [ 0.000000] ACPI: MCFG 6fd9ff8c 0003C (v01 PTLTD MCFG 06040000 LTP 00000000) [ 0.000000] ACPI: HPET 6fd9ffc8 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001) [ 0.000000] ACPI: SSDT 6fd99e12 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 6fd99d6c 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 6fd98983 013E9 (v01 PmRef CpuPm 00003000 INTL 20050228) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 901MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0] [ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] [ 0.000000] #5 [00008a9000 - 00008ac154] BRK ==> [00008a9000 - 00008ac154] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008ad000 - 0000ff8435] NEW RAMDISK ==> [00008ad000 - 0000ff8435] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00f8950] f8950 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0006fd90 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x0006fd90 [ 0.000000] On node 0 totalpages: 458025 [ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3961 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1804 pages used for memmap [ 0.000000] HighMem zone: 228998 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10398201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 70000000 (gap: 70000000:70000000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c1e07000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 454445 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=d3eba93d-b995-4e64-a784-600b2b7a6466 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 9162560 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0006fd90) [ 0.000000] Memory: 1791644k/1832512k available (4565k kernel code, 39576k reserved, 2143k data, 540k init, 923208k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1831.835 MHz processor. [ 0.001052] Console: colour VGA+ 80x25 [ 0.001060] console [tty0] enabled [ 0.001282] hpet clockevent registered [ 0.001288] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.001298] Calibrating delay loop (skipped), value calculated using timer frequency.. 3663.67 BogoMIPS (lpj=7327340) [ 0.001333] Security Framework initialized [ 0.001374] AppArmor: AppArmor initialized [ 0.001387] Mount-cache hash table entries: 512 [ 0.001635] Initializing cgroup subsys ns [ 0.001646] Initializing cgroup subsys cpuacct [ 0.001654] Initializing cgroup subsys memory [ 0.001667] Initializing cgroup subsys freezer [ 0.001671] Initializing cgroup subsys net_cls [ 0.001699] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.001705] CPU: L2 cache: 2048K [ 0.001710] CPU: Physical Processor ID: 0 [ 0.001714] CPU: Processor Core ID: 0 [ 0.001721] mce: CPU supports 6 MCE banks [ 0.001738] CPU0: Thermal monitoring enabled (TM2) [ 0.001744] using mwait in idle threads. [ 0.001757] Performance Counters: Core2 events, Intel PMU driver. [ 0.001774] ... version: 2 [ 0.001777] ... bit width: 40 [ 0.001781] ... generic counters: 2 [ 0.001785] ... value mask: 000000ffffffffff [ 0.001788] ... max period: 000000007fffffff [ 0.001792] ... fixed-purpose counters: 3 [ 0.001795] ... counter mask: 0000000700000003 [ 0.001803] Checking 'hlt' instruction... OK. [ 0.020005] ACPI: Core revision 20090521 [ 0.036405] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.076290] CPU0: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d [ 0.080001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3663.81 BogoMIPS (lpj=7327637) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 2048K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.166766] CPU1: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d [ 0.166790] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.168038] Brought up 2 CPUs [ 0.168042] Total of 2 processors activated (7327.48 BogoMIPS). [ 0.168092] CPU0 attaching sched-domain: [ 0.168098] domain 0: span 0-1 level MC [ 0.168103] groups: 0 1 [ 0.168114] CPU1 attaching sched-domain: [ 0.168119] domain 0: span 0-1 level MC [ 0.168123] groups: 1 0 [ 0.168264] Booting paravirtualized kernel on bare hardware [ 0.168411] regulator: core version 0.5 [ 0.168411] Time: 16:36:34 Date: 11/07/09 [ 0.168411] NET: Registered protocol family 16 [ 0.172187] EISA bus registered [ 0.172206] ACPI: bus type pci registered [ 0.172334] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 3 [ 0.172340] PCI: MCFG area at e0000000 reserved in E820 [ 0.172343] PCI: Using MMCONFIG for extended config space [ 0.172348] PCI: Using configuration type 1 for base access [ 0.174397] bio: create slab at 0 [ 0.174397] ACPI: EC: Look up EC in DSDT [ 0.182083] ACPI: Interpreter enabled [ 0.182098] ACPI: (supports S0 S1 S3 S4 S5) [ 0.182136] ACPI: Using IOAPIC for interrupt routing [ 0.182856] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.196497] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 0.204574] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.204579] ACPI: EC: driver started in interrupt mode [ 0.205033] ACPI: No dock devices found. [ 0.206103] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.206184] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd3ffffff] [ 0.206426] pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7] [ 0.206437] pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7] [ 0.206450] pci 0000:00:02.5: reg 18 io port: [0x170-0x177] [ 0.206461] pci 0000:00:02.5: reg 1c io port: [0x374-0x377] [ 0.206473] pci 0000:00:02.5: reg 20 io port: [0x1000-0x100f] [ 0.206519] pci 0000:00:02.5: PME# supported from D3cold [ 0.206526] pci 0000:00:02.5: PME# disabled [ 0.206566] pci 0000:00:03.0: reg 10 32bit mmio: [0xd4204000-0xd4204fff] [ 0.206645] pci 0000:00:03.1: reg 10 32bit mmio: [0xd4205000-0xd4205fff] [ 0.206751] pci 0000:00:03.3: reg 10 32bit mmio: [0xd4206000-0xd4206fff] [ 0.206826] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold [ 0.206834] pci 0000:00:03.3: PME# disabled [ 0.206895] pci 0000:00:04.0: reg 10 32bit mmio: [0xd4407000-0xd440707f] [ 0.206907] pci 0000:00:04.0: reg 14 io port: [0x1080-0x10ff] [ 0.206969] pci 0000:00:04.0: supports D1 D2 [ 0.206973] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.206981] pci 0000:00:04.0: PME# disabled [ 0.207031] pci 0000:00:05.0: reg 10 io port: [0x1058-0x105f] [ 0.207042] pci 0000:00:05.0: reg 14 io port: [0x104c-0x104f] [ 0.207054] pci 0000:00:05.0: reg 18 io port: [0x1050-0x1057] [ 0.207065] pci 0000:00:05.0: reg 1c io port: [0x1048-0x104b] [ 0.207076] pci 0000:00:05.0: reg 20 io port: [0x1020-0x102f] [ 0.207120] pci 0000:00:05.0: PME# supported from D3cold [ 0.207128] pci 0000:00:05.0: PME# disabled [ 0.207244] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.207251] pci 0000:00:06.0: PME# disabled [ 0.207378] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.207385] pci 0000:00:07.0: PME# disabled [ 0.207461] pci 0000:00:0f.0: reg 10 32bit mmio: [0xd4200000-0xd4203fff] [ 0.207531] pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold [ 0.207538] pci 0000:00:0f.0: PME# disabled [ 0.207664] pci 0000:00:1f.0: PME# supported from D0 D3hot D3cold [ 0.207672] pci 0000:00:1f.0: PME# disabled [ 0.207749] pci 0000:01:00.0: reg 10 32bit mmio: [0xc0000000-0xcfffffff] [ 0.207759] pci 0000:01:00.0: reg 14 32bit mmio: [0xd4000000-0xd401ffff] [ 0.207770] pci 0000:01:00.0: reg 18 io port: [0x9000-0x907f] [ 0.207822] pci 0000:01:00.0: supports D1 D2 [ 0.207887] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff] [ 0.207895] pci 0000:00:01.0: bridge 32bit mmio: [0xd4000000-0xd40fffff] [ 0.207903] pci 0000:00:01.0: bridge 32bit mmio pref: [0xc0000000-0xcfffffff] [ 0.207998] pci 0000:02:00.0: reg 10 64bit mmio: [0xd4100000-0xd410ffff] [ 0.208221] pci 0000:00:06.0: bridge 32bit mmio: [0xd4100000-0xd41fffff] [ 0.208312] pci 0000:00:07.0: bridge io port: [0x3000-0x4fff] [ 0.208320] pci 0000:00:07.0: bridge 32bit mmio: [0xdc000000-0xdfffffff] [ 0.208442] pci_bus 0000:00: on NUMA node 0 [ 0.208449] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.221781] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11) [ 0.221964] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11) [ 0.222141] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 7 9 10 11) [ 0.222316] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11) [ 0.222529] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11) [ 0.222701] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11) [ 0.222874] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *7 9 10 11) [ 0.223047] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11) *0, disabled. [ 0.223392] SCSI subsystem initialized [ 0.223427] libata version 3.00 loaded. [ 0.223427] usbcore: registered new interface driver usbfs [ 0.223427] usbcore: registered new interface driver hub [ 0.223427] usbcore: registered new device driver usb [ 0.223427] ACPI: WMI: Mapper loaded [ 0.223427] PCI: Using ACPI for IRQ routing [ 0.236015] Bluetooth: Core ver 2.15 [ 0.236041] NET: Registered protocol family 31 [ 0.236041] Bluetooth: HCI device and connection manager initialized [ 0.236041] Bluetooth: HCI socket layer initialized [ 0.236041] NetLabel: Initializing [ 0.236041] NetLabel: domain hash size = 128 [ 0.236041] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.236065] NetLabel: unlabeled traffic allowed by default [ 0.236127] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.236138] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.256016] pnp: PnP ACPI init [ 0.256036] ACPI: bus type pnp registered [ 0.261184] pnp: PnP ACPI: found 10 devices [ 0.261189] ACPI: ACPI bus type pnp unregistered [ 0.261196] PnPBIOS: Disabled by ACPI PNP [ 0.261219] system 00:04: ioport range 0x8000-0x80be has been reserved [ 0.261226] system 00:04: ioport range 0x8100-0x812f has been reserved [ 0.261232] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 0.261238] system 00:04: ioport range 0xfe00-0xfe00 has been reserved [ 0.261244] system 00:04: ioport range 0x200-0x20f has been reserved [ 0.261250] system 00:04: ioport range 0x260-0x261 has been reserved [ 0.261256] system 00:04: ioport range 0x400-0x40f has been reserved [ 0.261262] system 00:04: iomem range 0xe0000000-0xefffffff has been reserved [ 0.261269] system 00:04: iomem range 0xfec00000-0xfecfffff could not be reserved [ 0.261275] system 00:04: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.261282] system 00:04: iomem range 0xffb80000-0xffbfffff has been reserved [ 0.261288] system 00:04: iomem range 0xffc00000-0xffc00fff has been reserved [ 0.261294] system 00:04: iomem range 0xffe00000-0xffe00fff has been reserved [ 0.261300] system 00:04: iomem range 0xffe80000-0xffefffff has been reserved [ 0.296099] AppArmor: AppArmor Filesystem Enabled [ 0.296170] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.296177] pci 0000:00:01.0: IO window: 0x9000-0x9fff [ 0.296187] pci 0000:00:01.0: MEM window: 0xd4000000-0xd40fffff [ 0.296195] pci 0000:00:01.0: PREFETCH window: 0xc0000000-0xcfffffff [ 0.296203] pci 0000:00:06.0: PCI bridge, secondary bus 0000:02 [ 0.296207] pci 0000:00:06.0: IO window: disabled [ 0.296216] pci 0000:00:06.0: MEM window: 0xd4100000-0xd41fffff [ 0.296223] pci 0000:00:06.0: PREFETCH window: disabled [ 0.296231] pci 0000:00:07.0: PCI bridge, secondary bus 0000:4d [ 0.296237] pci 0000:00:07.0: IO window: 0x3000-0x4fff [ 0.296246] pci 0000:00:07.0: MEM window: 0xdc000000-0xdfffffff [ 0.296253] pci 0000:00:07.0: PREFETCH window: disabled [ 0.296261] pci 0000:00:1f.0: PCI bridge, secondary bus 0000:04 [ 0.296265] pci 0000:00:1f.0: IO window: disabled [ 0.296274] pci 0000:00:1f.0: MEM window: disabled [ 0.296281] pci 0000:00:1f.0: PREFETCH window: disabled [ 0.296299] pci 0000:00:01.0: setting latency timer to 64 [ 0.296314] alloc irq_desc for 16 on node -1 [ 0.296318] alloc kstat_irqs on node -1 [ 0.296329] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.296336] pci 0000:00:06.0: setting latency timer to 64 [ 0.296350] pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.296357] pci 0000:00:07.0: setting latency timer to 64 [ 0.296372] pci 0000:00:1f.0: setting latency timer to 64 [ 0.296380] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.296386] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.296391] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff] [ 0.296396] pci_bus 0000:01: resource 1 mem: [0xd4000000-0xd40fffff] [ 0.296401] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff] [ 0.296407] pci_bus 0000:02: resource 1 mem: [0xd4100000-0xd41fffff] [ 0.296412] pci_bus 0000:4d: resource 0 io: [0x3000-0x4fff] [ 0.296417] pci_bus 0000:4d: resource 1 mem: [0xdc000000-0xdfffffff] [ 0.296481] NET: Registered protocol family 2 [ 0.296665] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.297270] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.298286] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.298780] TCP: Hash tables configured (established 131072 bind 65536) [ 0.298785] TCP reno registered [ 0.298920] NET: Registered protocol family 1 [ 0.299030] Trying to unpack rootfs image as initramfs... [ 0.502845] Switched to high resolution mode on CPU 1 [ 0.504012] Switched to high resolution mode on CPU 0 [ 0.672433] Freeing initrd memory: 7469k freed [ 0.679163] cpufreq-nforce2: No nForce2 chipset. [ 0.679223] Scanning for low memory corruption every 60 seconds [ 0.679432] audit: initializing netlink socket (disabled) [ 0.679468] type=2000 audit(1257611793.676:1): initialized [ 0.696555] highmem bounce pool size: 64 pages [ 0.696565] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.699528] VFS: Disk quotas dquot_6.5.2 [ 0.699652] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.700744] fuse init (API version 7.12) [ 0.700912] msgmni has been set to 1712 [ 0.701329] alg: No test for stdrng (krng) [ 0.701356] io scheduler noop registered [ 0.701361] io scheduler anticipatory registered [ 0.701365] io scheduler deadline registered [ 0.701450] io scheduler cfq registered (default) [ 0.701544] pci 0000:01:00.0: Boot video device [ 0.701782] alloc irq_desc for 24 on node -1 [ 0.701787] alloc kstat_irqs on node -1 [ 0.701808] pcieport-driver 0000:00:06.0: irq 24 for MSI/MSI-X [ 0.701825] pcieport-driver 0000:00:06.0: setting latency timer to 64 [ 0.702022] alloc irq_desc for 25 on node -1 [ 0.702026] alloc kstat_irqs on node -1 [ 0.702041] pcieport-driver 0000:00:07.0: irq 25 for MSI/MSI-X [ 0.702055] pcieport-driver 0000:00:07.0: setting latency timer to 64 [ 0.702256] alloc irq_desc for 26 on node -1 [ 0.702260] alloc kstat_irqs on node -1 [ 0.702273] pcieport-driver 0000:00:1f.0: irq 26 for MSI/MSI-X [ 0.702288] pcieport-driver 0000:00:1f.0: setting latency timer to 64 [ 0.702413] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.702519] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.704362] ACPI: AC Adapter [ADP0] (on-line) [ 0.704503] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.704511] ACPI: Power Button [PWRF] [ 0.704604] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 0.706530] ACPI: Lid Switch [LID0] [ 0.706635] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 0.706641] ACPI: Power Button [PWRB] [ 0.706729] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 0.706737] ACPI: Sleep Button [SLPB] [ 0.708044] ACPI: SSDT 6fd9a60e 0021F (v01 PmRef Cpu0Ist 00003000 INTL 20050228) [ 0.709843] ACPI: SSDT 6fd9a071 00518 (v01 PmRef Cpu0Cst 00003001 INTL 20050228) [ 0.713974] Monitor-Mwait will be used to enter C-1 state [ 0.714036] Monitor-Mwait will be used to enter C-2 state [ 0.714053] Marking TSC unstable due to TSC halts in idle [ 0.714086] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 0.714147] processor LNXCPU:00: registered as cooling_device0 [ 0.714156] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.715075] ACPI: SSDT 6fd9a82d 001B0 (v01 PmRef Cpu1Ist 00003000 INTL 20050228) [ 0.715750] ACPI: SSDT 6fd9a589 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228) [ 0.716812] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 0.716856] processor LNXCPU:01: registered as cooling_device1 [ 0.716864] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.721095] isapnp: Scanning for PnP cards... [ 0.911465] ACPI: Battery Slot [BAT0] (battery present) [ 1.074891] isapnp: No Plug & Play device found [ 1.077139] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.079651] brd: module loaded [ 1.080551] loop: module loaded [ 1.080688] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 1.081036] sata_sis 0000:00:05.0: version 1.0 [ 1.081058] alloc irq_desc for 17 on node -1 [ 1.081063] alloc kstat_irqs on node -1 [ 1.081075] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.081084] sata_sis 0000:00:05.0: Detected SiS 1183/966/966L/968/680 controller in PATA mode [ 1.081211] scsi0 : sata_sis [ 1.081362] scsi1 : sata_sis [ 1.082204] ata1: PATA max UDMA/133 cmd 0x1058 ctl 0x104c bmdma 0x1020 irq 17 [ 1.082210] ata2: PATA max UDMA/133 cmd 0x1050 ctl 0x1048 bmdma 0x1028 irq 17 [ 1.083068] pata_sis 0000:00:02.5: version 0.5.2 [ 1.083084] pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.083207] scsi2 : pata_sis [ 1.083309] scsi3 : pata_sis [ 1.083849] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1000 irq 14 [ 1.083855] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1008 irq 15 [ 1.084513] Fixed MDIO Bus: probed [ 1.084583] PPP generic driver version 2.4.2 [ 1.084751] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.084780] alloc irq_desc for 22 on node -1 [ 1.084784] alloc kstat_irqs on node -1 [ 1.084793] ehci_hcd 0000:00:03.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 1.084810] ehci_hcd 0000:00:03.3: EHCI Host Controller [ 1.084899] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 [ 1.084940] ehci_hcd 0000:00:03.3: debug port 1 [ 1.084968] ehci_hcd 0000:00:03.3: irq 22, io mem 0xd4206000 [ 1.097016] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00 [ 1.097156] usb usb1: configuration #1 chosen from 1 choice [ 1.097214] hub 1-0:1.0: USB hub found [ 1.097227] hub 1-0:1.0: 8 ports detected [ 1.097341] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.097365] alloc irq_desc for 20 on node -1 [ 1.097369] alloc kstat_irqs on node -1 [ 1.097377] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.097392] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 1.097450] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 [ 1.097478] ohci_hcd 0000:00:03.0: irq 20, io mem 0xd4204000 [ 1.156109] usb usb2: configuration #1 chosen from 1 choice [ 1.156163] hub 2-0:1.0: USB hub found [ 1.156176] hub 2-0:1.0: 4 ports detected [ 1.156260] alloc irq_desc for 21 on node -1 [ 1.156264] alloc kstat_irqs on node -1 [ 1.156273] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.156287] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 1.156353] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 [ 1.156380] ohci_hcd 0000:00:03.1: irq 21, io mem 0xd4205000 [ 1.210136] usb usb3: configuration #1 chosen from 1 choice [ 1.210194] hub 3-0:1.0: USB hub found [ 1.210207] hub 3-0:1.0: 4 ports detected [ 1.210298] uhci_hcd: USB Universal Host Controller Interface driver [ 1.210439] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.213958] i8042.c: Detected active multiplexing controller, rev 1.1. [ 1.216615] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.216626] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.216633] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.216638] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.216644] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.216758] mice: PS/2 mouse device common for all mice [ 1.216997] rtc_cmos 00:02: RTC can wake from S4 [ 1.217054] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.217083] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 1.217276] device-mapper: uevent: version 1.0.3 [ 1.217430] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.217567] device-mapper: multipath: version 1.1.0 loaded [ 1.217572] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.217782] EISA: Probing bus 0 at eisa.0 [ 1.217791] Cannot allocate resource for EISA slot 1 [ 1.217800] Cannot allocate resource for EISA slot 3 [ 1.217804] Cannot allocate resource for EISA slot 4 [ 1.217823] Cannot allocate resource for EISA slot 8 [ 1.217826] EISA: Detected 0 cards. [ 1.218086] cpuidle: using governor ladder [ 1.218266] cpuidle: using governor menu [ 1.219230] TCP cubic registered [ 1.219531] NET: Registered protocol family 10 [ 1.220442] lo: Disabled Privacy Extensions [ 1.221118] NET: Registered protocol family 17 [ 1.221149] Bluetooth: L2CAP ver 2.13 [ 1.221153] Bluetooth: L2CAP socket layer initialized [ 1.221159] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.221162] Bluetooth: SCO socket layer initialized [ 1.221216] Bluetooth: RFCOMM TTY layer initialized [ 1.221222] Bluetooth: RFCOMM socket layer initialized [ 1.221226] Bluetooth: RFCOMM ver 1.11 [ 1.221877] Using IPI No-Shortcut mode [ 1.221945] PM: Resume from disk failed. [ 1.221961] registered taskstats version 1 [ 1.222068] Magic number: 1:833:640 [ 1.222143] rtc_cmos 00:02: setting system clock to 2009-11-07 16:36:35 UTC (1257611795) [ 1.222147] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.222149] EDD information not available. [ 1.244479] ata3.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WW01, max UDMA/33 [ 1.253217] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 1.260305] ata3.00: configured for UDMA/33 [ 1.293610] ata1.00: ATA-7: WDC WD1600BEVS-07RST0, 04.01G04, max UDMA/133 [ 1.293616] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.308713] ata1.00: configured for UDMA/133 [ 1.308906] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-0 04.0 PQ: 0 ANSI: 5 [ 1.309039] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.309086] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.309137] sd 0:0:0:0: [sda] Write Protect is off [ 1.309140] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.309165] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.309301] sda: sda1 sda2 sda3 [ 1.331845] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.478383] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WW01 PQ: 0 ANSI: 5 [ 1.489276] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.489282] Uniform CD-ROM driver Revision: 3.20 [ 1.489418] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.489494] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 1.489543] ata4: port disabled. ignoring. [ 1.489570] Freeing unused kernel memory: 540k freed [ 1.489942] Write protecting the kernel text: 4568k [ 1.489995] Write protecting the kernel read-only data: 1836k [ 1.611663] Linux agpgart interface v0.103 [ 1.614425] agpgart-sis 0000:00:00.0: SiS chipset [1039/0671] [ 1.624162] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xd0000000 [ 1.645152] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 1.645364] acpi device:04: registered as cooling_device2 [ 1.645468] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/device:02/input/input6 [ 1.645517] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 1.714109] usb 2-2: new full speed USB device using ohci_hcd and address 2 [ 1.937231] usb 2-2: configuration #1 chosen from 1 choice [ 1.949051] usbcore: registered new interface driver hiddev [ 1.954421] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0/input/input7 [ 1.954512] generic-usb 0003:046D:C526.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:03.0-2/input0 [ 1.965252] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.1/input/input8 [ 1.965373] generic-usb 0003:046D:C526.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:03.0-2/input1 [ 1.965392] usbcore: registered new interface driver usbhid [ 1.965396] usbhid: v2.6:USB HID core driver [ 3.143395] PM: Starting manual resume from disk [ 3.143400] PM: Resume from partition 8:2 [ 3.143402] PM: Checking hibernation image. [ 3.143582] PM: Resume from disk failed. [ 3.203854] kjournald starting. Commit interval 5 seconds [ 3.203882] EXT3-fs: mounted filesystem with writeback data mode. [ 3.830896] type=1505 audit(1257611798.107:2): operation="profile_load" pid=391 name=/usr/share/gdm/guest-session/Xsession [ 3.839839] type=1505 audit(1257611798.113:3): operation="profile_load" pid=392 name=/sbin/dhclient3 [ 3.840767] type=1505 audit(1257611798.117:4): operation="profile_load" pid=392 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 3.841207] type=1505 audit(1257611798.117:5): operation="profile_load" pid=392 name=/usr/lib/connman/scripts/dhclient-script [ 3.889530] type=1505 audit(1257611798.166:6): operation="profile_load" pid=393 name=/usr/bin/evince [ 3.902101] type=1505 audit(1257611798.177:7): operation="profile_load" pid=393 name=/usr/bin/evince-previewer [ 3.909472] type=1505 audit(1257611798.185:8): operation="profile_load" pid=393 name=/usr/bin/evince-thumbnailer [ 3.934035] type=1505 audit(1257611798.209:9): operation="profile_load" pid=395 name=/usr/lib/cups/backend/cups-pdf [ 5.088420] Adding 971924k swap on /dev/sda2. Priority:-1 extents:1 across:971924k [ 6.061020] EXT3 FS on sda3, internal journal [ 6.061427] udev: starting version 147 [ 6.812285] kjournald starting. Commit interval 5 seconds [ 6.812695] EXT3 FS on sda1, internal journal [ 6.812706] EXT3-fs: mounted filesystem with writeback data mode. [ 8.287034] ip_tables: (C) 2000-2006 Netfilter Core Team [ 9.846917] alloc irq_desc for 18 on node -1 [ 9.846921] alloc kstat_irqs on node -1 [ 9.846930] HDA Intel 0000:00:0f.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 9.846968] HDA Intel 0000:00:0f.0: setting latency timer to 64 [ 10.100621] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS... [ 10.100724] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0f.0/input/input9 [ 10.666163] __ratelimit: 6 callbacks suppressed [ 10.666167] type=1505 audit(1257611804.943:12): operation="profile_replace" pid=866 name=/usr/share/gdm/guest-session/Xsession [ 10.668273] type=1505 audit(1257611804.945:13): operation="profile_replace" pid=867 name=/sbin/dhclient3 [ 10.669094] type=1505 audit(1257611804.945:14): operation="profile_replace" pid=867 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 10.669538] type=1505 audit(1257611804.945:15): operation="profile_replace" pid=867 name=/usr/lib/connman/scripts/dhclient-script [ 10.674138] type=1505 audit(1257611804.949:16): operation="profile_replace" pid=868 name=/usr/bin/evince [ 10.686801] type=1505 audit(1257611804.961:17): operation="profile_replace" pid=868 name=/usr/bin/evince-previewer [ 10.694378] type=1505 audit(1257611804.969:18): operation="profile_replace" pid=868 name=/usr/bin/evince-thumbnailer [ 10.707035] type=1505 audit(1257611804.981:19): operation="profile_replace" pid=870 name=/usr/lib/cups/backend/cups-pdf [ 10.707989] type=1505 audit(1257611804.981:20): operation="profile_replace" pid=870 name=/usr/sbin/cupsd [ 10.711151] type=1505 audit(1257611804.985:21): operation="profile_replace" pid=871 name=/usr/sbin/tcpdump [ 12.519601] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 12.668120] cfg80211: Calling CRDA to update world regulatory domain [ 13.067570] ath5k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 13.067587] ath5k 0000:02:00.0: setting latency timer to 64 [ 13.067627] ath5k 0000:02:00.0: registered as 'phy0' [ 13.157565] ath: EEPROM regdomain: 0x30 [ 13.157568] ath: EEPROM indicates we should expect a direct regpair map [ 13.157572] ath: Country alpha2 being used: AM [ 13.157574] ath: Regpair used: 0x30 [ 13.206126] phy0: Selected rate control algorithm 'minstrel' [ 13.206895] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) [ 13.207444] cfg80211: Calling CRDA for country: AM [ 14.219495] cfg80211: Regulatory domain changed to country: AM [ 14.219499] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 14.219502] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 14.219505] (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 1800 mBm) [ 14.219508] (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 1800 mBm) [ 17.807966] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 18.026403] lp: driver loaded but no devices found [ 18.031688] ppdev: user-space parallel port driver [ 19.047174] sis190 Gigabit Ethernet driver 1.3 loaded. [ 19.047198] alloc irq_desc for 19 on node -1 [ 19.047201] alloc kstat_irqs on node -1 [ 19.047209] sis190 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 19.047221] sis190 0000:00:04.0: setting latency timer to 64 [ 19.047236] 0000:00:04.0: Read MAC address from EEPROM [ 19.133019] 0000:00:04.0: Atheros PHY transceiver at address 1. [ 19.645030] 0000:00:04.0: Using transceiver at address 1 as default. [ 19.677826] 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at f813a000 (IRQ: 19), 00:1e:33:04:10:a3 [ 19.677830] eth0: RGMII mode. [ 19.677836] eth0: Enabling Auto-negotiation. [ 19.718353] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.975284] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04753/0x200000 [ 20.008817] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10 [ 29.744038] eth0: auto-negotiating... [ 39.768026] eth0: auto-negotiating... [ 49.796031] eth0: auto-negotiating... [ 59.824026] eth0: auto-negotiating... [ 69.848029] eth0: auto-negotiating... [ 79.872027] eth0: auto-negotiating... [ 89.896030] eth0: auto-negotiating... [ 99.920031] eth0: auto-negotiating... [ 109.944034] eth0: auto-negotiating... [ 119.968030] eth0: auto-negotiating... [ 129.992030] eth0: auto-negotiating... [ 140.016033] eth0: auto-negotiating... [ 150.040031] eth0: auto-negotiating... [ 160.064043] eth0: auto-negotiating... [ 170.088038] eth0: auto-negotiating... [ 180.112038] eth0: auto-negotiating... [ 190.136031] eth0: auto-negotiating... [ 200.160035] eth0: auto-negotiating... [ 210.184029] eth0: auto-negotiating... [ 220.208028] eth0: auto-negotiating... [ 230.232034] eth0: auto-negotiating... [ 240.256026] eth0: auto-negotiating... [ 250.280029] eth0: auto-negotiating... [ 260.304034] eth0: auto-negotiating... [ 270.328028] eth0: auto-negotiating... [ 280.352030] eth0: auto-negotiating... [ 290.376036] eth0: auto-negotiating... [ 300.400035] eth0: auto-negotiating... [ 310.424029] eth0: auto-negotiating... [ 320.448029] eth0: auto-negotiating... [ 330.472036] eth0: auto-negotiating... [ 340.496029] eth0: auto-negotiating... [ 350.520031] eth0: auto-negotiating... [ 360.544034] eth0: auto-negotiating... [ 370.568029] eth0: auto-negotiating... [ 380.592031] eth0: auto-negotiating... [ 390.616034] eth0: auto-negotiating... [ 400.640029] eth0: auto-negotiating... [ 410.664031] eth0: auto-negotiating... [ 420.688036] eth0: auto-negotiating... [ 430.712028] eth0: auto-negotiating... [ 440.736030] eth0: auto-negotiating... [ 447.452869] [drm] Initialized drm 1.1.0 20060810 [ 447.471951] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 447.471963] pci 0000:01:00.0: setting latency timer to 64 [ 447.473318] [drm] Initialized sis 1.3.0 20070626 for 0000:01:00.0 on minor 0 [ 447.477771] agpgart-sis 0000:00:00.0: AGP 3.5 bridge [ 447.477812] agpgart-sis 0000:00:00.0: putting AGP V3 device into 4x mode [ 447.477947] pci 0000:01:00.0: putting AGP V3 device into 4x mode [ 450.760029] eth0: auto-negotiating... [ 455.029370] wlan0: deauthenticating from 00:1a:2a:a8:52:7a by local choice (reason=3) [ 455.029759] wlan0: direct probe to AP 00:1a:2a:a8:52:7a (try 1) [ 455.037460] wlan0: direct probe responded [ 455.037467] wlan0: authenticate with AP 00:1a:2a:a8:52:7a (try 1) [ 455.045971] wlan0: authenticated [ 455.046008] wlan0: associate with AP 00:1a:2a:a8:52:7a (try 1) [ 455.053028] wlan0: RX AssocResp from 00:1a:2a:a8:52:7a (capab=0x461 status=0 aid=1) [ 455.053033] wlan0: associated [ 455.053809] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 460.784030] eth0: auto-negotiating... [ 465.217026] wlan0: no IPv6 routers present [ 470.808031] eth0: auto-negotiating... [ 480.832031] eth0: auto-negotiating... [ 490.856025] eth0: auto-negotiating... [ 500.880027] eth0: auto-negotiating... [ 510.904032] eth0: auto-negotiating... [ 520.928025] eth0: auto-negotiating... [ 530.952027] eth0: auto-negotiating... [ 540.976030] eth0: auto-negotiating... [ 551.000025] eth0: auto-negotiating... [ 561.024026] eth0: auto-negotiating... [ 571.048030] eth0: auto-negotiating... [ 581.072025] eth0: auto-negotiating... [ 591.096026] eth0: auto-negotiating... [ 601.120030] eth0: auto-negotiating... [ 611.144024] eth0: auto-negotiating... [ 621.168033] eth0: auto-negotiating... [ 631.192036] eth0: auto-negotiating... [ 641.216025] eth0: auto-negotiating... [ 651.240026] eth0: auto-negotiating... [ 661.264031] eth0: auto-negotiating... [ 671.288026] eth0: auto-negotiating... [ 681.312027] eth0: auto-negotiating... [ 691.336031] eth0: auto-negotiating... [ 701.360025] eth0: auto-negotiating... [ 711.384026] eth0: auto-negotiating... [ 721.408030] eth0: auto-negotiating... [ 731.432024] eth0: auto-negotiating... [ 741.456025] eth0: auto-negotiating... [ 751.480032] eth0: auto-negotiating... [ 761.504025] eth0: auto-negotiating... [ 771.528027] eth0: auto-negotiating... [ 781.552030] eth0: auto-negotiating... [ 791.576025] eth0: auto-negotiating... [ 801.600026] eth0: auto-negotiating... [ 811.624030] eth0: auto-negotiating... [ 821.648025] eth0: auto-negotiating... [ 831.672026] eth0: auto-negotiating... [ 841.696031] eth0: auto-negotiating... [ 851.720036] eth0: auto-negotiating... [ 859.788042] usb 1-1: new high speed USB device using ehci_hcd and address 3 [ 859.921089] usb 1-1: configuration #1 chosen from 1 choice [ 860.007676] Initializing USB Mass Storage driver... [ 860.007885] scsi4 : SCSI emulation for USB Mass Storage devices [ 860.008916] usb-storage: device found at 3 [ 860.008922] usb-storage: waiting for device to settle before scanning [ 860.008944] usbcore: registered new interface driver usb-storage [ 860.008951] USB Mass Storage support registered. [ 861.744031] eth0: auto-negotiating... [ 865.008316] usb-storage: device scan complete [ 865.008909] scsi 4:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 3.27 PQ: 0 ANSI: 2 [ 865.009510] scsi 4:0:0:1: CD-ROM SanDisk U3 Cruzer Micro 3.27 PQ: 0 ANSI: 2 [ 865.010376] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 865.012703] sd 4:0:0:0: [sdb] 4001422 512-byte logical blocks: (2.04 GB/1.90 GiB) [ 865.016546] sd 4:0:0:0: [sdb] Write Protect is off [ 865.016555] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 865.016561] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 865.022032] sr1: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray [ 865.022265] sr 4:0:0:1: Attached scsi CD-ROM sr1 [ 865.022398] sr 4:0:0:1: Attached scsi generic sg3 type 5 [ 865.026478] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 865.026487] sdb: sdb1 [ 865.030726] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 865.030733] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 871.768028] eth0: auto-negotiating... [ 881.792028] eth0: auto-negotiating... [ 891.816035] eth0: auto-negotiating... [ 896.112048] usb 1-1: reset high speed USB device using ehci_hcd and address 3 [ 901.840035] eth0: auto-negotiating... [ 911.864030] eth0: auto-negotiating... [ 921.888031] eth0: auto-negotiating... [ 931.912034] eth0: auto-negotiating... [ 940.045025] kjournald starting. Commit interval 5 seconds [ 940.045043] EXT3-fs warning: checktime reached, running e2fsck is recommended [ 940.049598] EXT3 FS on sdb1, internal journal [ 940.049609] EXT3-fs: mounted filesystem with writeback data mode. [ 941.936028] eth0: auto-negotiating... [ 951.960032] eth0: auto-negotiating... [ 961.984036] eth0: auto-negotiating... [ 972.008034] eth0: auto-negotiating... [ 982.032032] eth0: auto-negotiating... [ 992.056780] eth0: auto-negotiating... [ 1002.080035] eth0: auto-negotiating... [ 1012.104031] eth0: auto-negotiating... [ 1022.129301] eth0: auto-negotiating... [ 1032.152031] eth0: auto-negotiating... [ 1042.176044] eth0: auto-negotiating... [ 1052.200033] eth0: auto-negotiating... [ 1062.224030] eth0: auto-negotiating... [ 1072.252075] eth0: auto-negotiating... [ 1082.276029] eth0: auto-negotiating... [ 1092.300031] eth0: auto-negotiating... [ 1102.324026] eth0: auto-negotiating... [ 1112.348030] eth0: auto-negotiating... [ 1122.372030] eth0: auto-negotiating... [ 1132.396027] eth0: auto-negotiating... [ 1142.420030] eth0: auto-negotiating... [ 1152.444143] eth0: auto-negotiating... [ 1162.468044] eth0: auto-negotiating... [ 1172.492026] eth0: auto-negotiating... [ 1182.516033] eth0: auto-negotiating... [ 1192.540124] eth0: auto-negotiating... [ 1202.564033] eth0: auto-negotiating... [ 1212.588042] eth0: auto-negotiating... [ 1222.612036] eth0: auto-negotiating... [ 1232.636029] eth0: auto-negotiating... [ 1242.660030] eth0: auto-negotiating... [ 1252.684037] eth0: auto-negotiating... [ 1262.708031] eth0: auto-negotiating... [ 1270.222167] usb 1-1: USB disconnect, address 3 [ 1270.317346] cdrom: issuing MRW back ground format suspend [ 1272.732039] eth0: auto-negotiating... [ 1282.756038] eth0: auto-negotiating... [ 1292.780029] eth0: auto-negotiating... [ 1302.804030] eth0: auto-negotiating... [ 1312.828035] eth0: auto-negotiating... [ 1322.852027] eth0: auto-negotiating... [ 1332.876030] eth0: auto-negotiating... [ 1342.900031] eth0: auto-negotiating... [ 1352.924029] eth0: auto-negotiating... [ 1362.948030] eth0: auto-negotiating... [ 1369.756044] usb 1-1: new high speed USB device using ehci_hcd and address 4 [ 1369.889050] usb 1-1: configuration #1 chosen from 1 choice [ 1369.891789] scsi5 : SCSI emulation for USB Mass Storage devices [ 1369.892026] usb-storage: device found at 4 [ 1369.892031] usb-storage: waiting for device to settle before scanning [ 1372.972037] eth0: auto-negotiating... [ 1374.892383] usb-storage: device scan complete [ 1374.892854] scsi 5:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 3.27 PQ: 0 ANSI: 2 [ 1374.893725] scsi 5:0:0:1: CD-ROM SanDisk U3 Cruzer Micro 3.27 PQ: 0 ANSI: 2 [ 1374.894939] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 1374.905456] sd 5:0:0:0: [sdc] 4001422 512-byte logical blocks: (2.04 GB/1.90 GiB) [ 1374.906944] sd 5:0:0:0: [sdc] Write Protect is off [ 1374.906950] sd 5:0:0:0: [sdc] Mode Sense: 03 00 00 00 [ 1374.906956] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 1374.907444] sr1: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray [ 1374.907648] sr 5:0:0:1: Attached scsi CD-ROM sr1 [ 1374.907787] sr 5:0:0:1: Attached scsi generic sg3 type 5 [ 1374.911437] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 1374.911448] sdc: sdc1 [ 1374.919816] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 1374.919826] sd 5:0:0:0: [sdc] Attached SCSI removable disk [ 1382.996029] eth0: auto-negotiating... [ 1393.020037] eth0: auto-negotiating... [ 1403.044029] eth0: auto-negotiating... [ 1413.068031] eth0: auto-negotiating... [ 1423.092030] eth0: auto-negotiating... [ 1433.116037] eth0: auto-negotiating... [ 1436.898155] kjournald starting. Commit interval 5 seconds [ 1436.898170] EXT3-fs warning: checktime reached, running e2fsck is recommended [ 1436.903957] EXT3 FS on sdc1, internal journal [ 1436.903967] EXT3-fs: mounted filesystem with writeback data mode. [ 1443.140030] eth0: auto-negotiating... [ 1453.164031] eth0: auto-negotiating... [ 1463.188036] eth0: auto-negotiating... [ 1473.224079] eth0: auto-negotiating... [ 1483.248049] eth0: auto-negotiating... [ 1493.272073] eth0: auto-negotiating... [ 1503.300050] eth0: auto-negotiating... [ 1513.328028] eth0: auto-negotiating... [ 1523.352026] eth0: auto-negotiating... [ 1533.384047] eth0: auto-negotiating... [ 1543.412041] eth0: auto-negotiating... [ 1553.436912] eth0: auto-negotiating... [ 1563.468050] eth0: auto-negotiating... [ 1570.161404] usb 1-1: USB disconnect, address 4 [ 1573.492038] eth0: auto-negotiating... [ 1583.516032] eth0: auto-negotiating... [ 1583.824386] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1584.132053] usb 1-1: new high speed USB device using ehci_hcd and address 6 [ 1584.377859] usb 1-1: configuration #1 chosen from 1 choice [ 1584.388296] scsi6 : SCSI emulation for USB Mass Storage devices [ 1584.389189] usb-storage: device found at 6 [ 1584.389192] usb-storage: waiting for device to settle before scanning [ 1589.390009] usb-storage: device scan complete [ 1589.391936] scsi 6:0:0:0: Direct-Access USB Flash Disk 1100 PQ: 0 ANSI: 0 CCS [ 1589.392845] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 1589.397376] sd 6:0:0:0: [sdc] 7928832 512-byte logical blocks: (4.05 GB/3.78 GiB) [ 1589.398809] sd 6:0:0:0: [sdc] Write Protect is off [ 1589.398837] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 1589.398843] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 1589.404543] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 1589.404551] sdc: sdc1 [ 1589.576778] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 1589.576787] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 1593.560048] eth0: auto-negotiating... [ 1596.598060] usb 1-1: USB disconnect, address 6 [ 1603.600022] eth0: auto-negotiating... [ 1613.628034] eth0: auto-negotiating... [ 1623.652031] eth0: auto-negotiating... [ 1624.834720] udev: starting version 147 [ 1627.859773] type=1505 audit(1257613422.134:22): operation="profile_replace" pid=8027 name=/usr/share/gdm/guest-session/Xsession [ 1627.863740] type=1505 audit(1257613422.138:23): operation="profile_replace" pid=8028 name=/sbin/dhclient3 [ 1627.865270] type=1505 audit(1257613422.142:24): operation="profile_replace" pid=8028 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 1627.866073] type=1505 audit(1257613422.142:25): operation="profile_replace" pid=8028 name=/usr/lib/connman/scripts/dhclient-script [ 1627.874530] type=1505 audit(1257613422.150:26): operation="profile_replace" pid=8029 name=/usr/bin/evince [ 1627.894478] type=1505 audit(1257613422.170:27): operation="profile_replace" pid=8029 name=/usr/bin/evince-previewer [ 1627.902332] type=1505 audit(1257613422.178:28): operation="profile_replace" pid=8029 name=/usr/bin/evince-thumbnailer [ 1627.913833] type=1505 audit(1257613422.190:29): operation="profile_replace" pid=8031 name=/usr/lib/cups/backend/cups-pdf [ 1627.914774] type=1505 audit(1257613422.190:30): operation="profile_replace" pid=8031 name=/usr/sbin/cupsd [ 1627.918510] type=1505 audit(1257613422.194:31): operation="profile_replace" pid=8032 name=/usr/sbin/tcpdump [ 1633.684015] eth0: auto-negotiating... [ 1638.867880] __ratelimit: 12 callbacks suppressed [ 1638.867885] type=1505 audit(1257613433.141:36): operation="profile_replace" pid=8071 name=/usr/bin/evince [ 1638.870806] type=1505 audit(1257613433.145:37): operation="profile_replace" pid=8071 name=/usr/bin/evince-previewer [ 1638.872073] type=1505 audit(1257613433.149:38): operation="profile_replace" pid=8071 name=/usr/bin/evince-thumbnailer [ 1639.172396] type=1505 audit(1257613433.446:39): operation="profile_replace" pid=8073 name=/usr/lib/cups/backend/cups-pdf [ 1639.172719] type=1505 audit(1257613433.446:40): operation="profile_replace" pid=8073 name=/usr/sbin/cupsd [ 1639.265054] type=1505 audit(1257613433.541:41): operation="profile_replace" pid=8074 name=/usr/sbin/tcpdump [ 1643.710473] eth0: auto-negotiating... [ 1647.096225] usb 1-1: new high speed USB device using ehci_hcd and address 7 [ 1647.241030] usb 1-1: configuration #1 chosen from 1 choice [ 1647.241796] scsi7 : SCSI emulation for USB Mass Storage devices [ 1647.242026] usb-storage: device found at 7 [ 1647.242030] usb-storage: waiting for device to settle before scanning [ 1652.243284] usb-storage: device scan complete [ 1652.244516] scsi 7:0:0:0: Direct-Access USB Flash Disk 1100 PQ: 0 ANSI: 0 CCS [ 1652.245021] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 1652.254716] sd 7:0:0:0: [sdc] 7928832 512-byte logical blocks: (4.05 GB/3.78 GiB) [ 1652.255487] sd 7:0:0:0: [sdc] Write Protect is off [ 1652.255491] sd 7:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 1652.255494] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 1652.259364] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 1652.259373] sdc: sdc1 [ 1652.422244] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 1652.422251] sd 7:0:0:0: [sdc] Attached SCSI removable disk [ 1653.744036] eth0: auto-negotiating... [ 1660.828140] type=1505 audit(1257613455.102:42): operation="profile_replace" pid=9501 name=/usr/bin/evince [ 1660.830626] type=1505 audit(1257613455.106:43): operation="profile_replace" pid=9501 name=/usr/bin/evince-previewer [ 1660.831968] type=1505 audit(1257613455.106:44): operation="profile_replace" pid=9501 name=/usr/bin/evince-thumbnailer [ 1663.764048] eth0: auto-negotiating... [ 1673.788123] eth0: auto-negotiating... [ 1675.442198] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 1675.447869] SGI XFS Quota Management subsystem [ 1675.493026] JFS: nTxBlock = 8192, nTxLock = 65536 [ 1675.532229] NTFS driver 2.1.29 [Flags: R/O MODULE]. [ 1675.591391] QNX4 filesystem 0.2.3 registered. [ 1683.812025] eth0: auto-negotiating... [ 1693.844029] eth0: auto-negotiating... [ 1703.880019] eth0: auto-negotiating... [ 1713.900032] eth0: auto-negotiating... [ 1723.924036] eth0: auto-negotiating... [ 1733.948035] eth0: auto-negotiating... [ 1743.972031] eth0: auto-negotiating... [ 1753.996036] eth0: auto-negotiating... [ 1764.020030] eth0: auto-negotiating... [ 1774.044030] eth0: auto-negotiating... [ 1784.068037] eth0: auto-negotiating... [ 1794.092029] eth0: auto-negotiating... [ 1804.116031] eth0: auto-negotiating... [ 1814.140043] eth0: auto-negotiating... [ 1824.164033] eth0: auto-negotiating... [ 1834.188097] eth0: auto-negotiating... [ 1844.212037] eth0: auto-negotiating... [ 1854.236062] eth0: auto-negotiating... [ 1864.264033] eth0: auto-negotiating... [ 1874.288032] eth0: auto-negotiating... [ 1884.312052] eth0: auto-negotiating... [ 1894.336041] eth0: auto-negotiating... [ 1904.360740] eth0: auto-negotiating... [ 1914.384034] eth0: auto-negotiating... [ 1924.412031] eth0: auto-negotiating... [ 1925.217040] type=1505 audit(1257613719.493:45): operation="profile_replace" pid=17369 name=/usr/share/gdm/guest-session/Xsession [ 1925.395013] type=1505 audit(1257613719.670:46): operation="profile_replace" pid=17370 name=/sbin/dhclient3 [ 1925.395190] type=1505 audit(1257613719.670:47): operation="profile_replace" pid=17370 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 1925.395282] type=1505 audit(1257613719.670:48): operation="profile_replace" pid=17370 name=/usr/lib/connman/scripts/dhclient-script [ 1934.452015] eth0: auto-negotiating... [ 1936.387669] type=1505 audit(1257613730.661:49): operation="profile_replace" pid=17371 name=/usr/bin/evince [ 1936.389549] type=1505 audit(1257613730.665:50): operation="profile_replace" pid=17371 name=/usr/bin/evince-previewer [ 1936.390873] type=1505 audit(1257613730.665:51): operation="profile_replace" pid=17371 name=/usr/bin/evince-thumbnailer [ 1936.717327] type=1505 audit(1257613730.994:52): operation="profile_replace" pid=17373 name=/usr/lib/cups/backend/cups-pdf [ 1936.717661] type=1505 audit(1257613730.994:53): operation="profile_replace" pid=17373 name=/usr/sbin/cupsd [ 1936.811786] type=1505 audit(1257613731.086:54): operation="profile_load" pid=17374 name=/usr/sbin/mysqld-akonadi [ 1936.914554] type=1505 audit(1257613731.189:55): operation="profile_replace" pid=17375 name=/usr/sbin/tcpdump [ 1944.492045] eth0: auto-negotiating... [ 1954.516036] eth0: auto-negotiating... [ 1964.540032] eth0: auto-negotiating... [ 1974.564031] eth0: auto-negotiating... [ 1984.592067] eth0: auto-negotiating... [ 1994.612035] eth0: auto-negotiating... [ 2004.636034] eth0: auto-negotiating... [ 2014.660035] eth0: auto-negotiating... [ 2024.684029] eth0: auto-negotiating... [ 2034.708031] eth0: auto-negotiating... [ 2044.732037] eth0: auto-negotiating... [ 2054.756035] eth0: auto-negotiating... [ 2064.788033] eth0: auto-negotiating... [ 2074.812036] eth0: auto-negotiating... [ 2084.836037] eth0: auto-negotiating... [ 2094.860035] eth0: auto-negotiating... [ 2104.884031] eth0: auto-negotiating... [ 2114.908035] eth0: auto-negotiating... [ 2124.932029] eth0: auto-negotiating... [ 2134.956031] eth0: auto-negotiating... [ 2144.980035] eth0: auto-negotiating... [ 2155.004028] eth0: auto-negotiating... [ 2165.028032] eth0: auto-negotiating... [ 2175.052036] eth0: auto-negotiating... [ 2185.100031] eth0: auto-negotiating... [ 2195.124042] eth0: auto-negotiating... [ 2205.148041] eth0: auto-negotiating... [ 2215.172031] eth0: auto-negotiating... [ 2225.196031] eth0: auto-negotiating... [ 2235.220027] eth0: auto-negotiating... [ 2245.244029] eth0: auto-negotiating... [ 2255.268031] eth0: auto-negotiating... [ 2265.304047] eth0: auto-negotiating... [ 2275.328032] eth0: auto-negotiating... [ 2285.352037] eth0: auto-negotiating... [ 2295.376036] eth0: auto-negotiating...