[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-11-generic (buildd@roseapple) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #49-Ubuntu SMP Mon Aug 29 20:47:58 UTC 2011 (Ubuntu 2.6.38-11.49-generic 2.6.38.8) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf686c00 (usable) [ 0.000000] BIOS-e820: 00000000bf686c00 - 00000000bf688c00 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf688c00 - 00000000bf68ac00 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf68ac00 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel! [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: Dell Inc. OptiPlex GX280 /0C5706, BIOS A08 03/03/2006 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0xbf686 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0BF800000 mask FFF800000 uncachable [ 0.000000] 3 base 0BF700000 mask FFFF00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00fe710] fe710 [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000 [ 0.000000] RAMDISK: 364f2000 - 37271000 [ 0.000000] Reserving 128MB of memory at 384MB for crashkernel (System RAM: 3062MB) [ 0.000000] ACPI: RSDP 000fec00 00014 (v00 DELL ) [ 0.000000] ACPI: RSDT 000fcbdf 00040 (v01 DELL GX280 00000007 ASL 00000061) [ 0.000000] ACPI: FACP 000fcc1f 00074 (v01 DELL GX280 00000007 ASL 00000061) [ 0.000000] ACPI: DSDT fffd1ac2 030F2 (v01 DELL dt_ex 00001000 MSFT 0100000D) [ 0.000000] ACPI: FACS bf686c00 00040 [ 0.000000] ACPI: SSDT fffd4cf1 000BA (v01 DELL st_ex 00001000 MSFT 0100000D) [ 0.000000] ACPI: APIC 000fcc93 00092 (v01 DELL GX280 00000007 ASL 00000061) [ 0.000000] ACPI: BOOT 000fcd25 00028 (v01 DELL GX280 00000007 ASL 00000061) [ 0.000000] ACPI: ASF! 000fcd4d 00067 (v16 DELL GX280 00000007 ASL 00000061) [ 0.000000] ACPI: MCFG 000fcdb4 0003E (v01 DELL GX280 00000007 ASL 00000061) [ 0.000000] ACPI: HPET 000fcdf2 00038 (v01 DELL GX280 00000007 ASL 00000061) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2174MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000bf686 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x000bf686 [ 0.000000] On node 0 totalpages: 783894 [ 0.000000] free_area_init_node: node 0, pgdat c1784180, node_mem_map f4d02200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3952 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4350 pages used for memmap [ 0.000000] HighMem zone: 552330 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 6 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f4800000 s28800 r0 d24448 u524288 [ 0.000000] pcpu-alloc: s28800 r0 d24448 u524288 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 777768 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-11-generic root=UUID=28cad26f-552f-4ae0-9056-0cbec6d54475 ro crashkernel=384M-2G:64M,2G-:128M quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 15679800 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000bf686) [ 0.000000] Memory: 2940200k/3136024k available (5191k kernel code, 195376k reserved, 2537k data, 700k init, 2226720k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc178d000 - 0xc183c000 ( 700 kB) [ 0.000000] .data : 0xc1511e81 - 0xc178c500 (2537 kB) [ 0.000000] .text : 0xc1000000 - 0xc1511e81 (5191 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:2304 nr_irqs:744 16 [ 0.000000] CPU 0 irqstacks, hard=f340a000 soft=f340c000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2793.146 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.29 BogoMIPS (lpj=11172584) [ 0.004012] pid_max: default: 32768 minimum: 301 [ 0.004048] Security Framework initialized [ 0.004069] AppArmor: AppArmor initialized [ 0.004073] Yama: becoming mindful. [ 0.004160] Mount-cache hash table entries: 512 [ 0.008102] Initializing cgroup subsys ns [ 0.008107] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.008112] Initializing cgroup subsys cpuacct [ 0.008120] Initializing cgroup subsys memory [ 0.008134] Initializing cgroup subsys devices [ 0.008138] Initializing cgroup subsys freezer [ 0.008141] Initializing cgroup subsys net_cls [ 0.008144] Initializing cgroup subsys blkio [ 0.008202] CPU: Physical Processor ID: 0 [ 0.008206] CPU: Processor Core ID: 0 [ 0.008209] mce: CPU supports 4 MCE banks [ 0.008224] CPU0: Thermal monitoring enabled (TM1) [ 0.008230] using mwait in idle threads. [ 0.011905] ACPI: Core revision 20110112 [ 0.045792] ftrace: allocating 23653 entries in 47 pages [ 0.052077] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.052404] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.092110] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01 [ 0.096005] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.096005] ... version: 0 [ 0.096005] ... bit width: 40 [ 0.096005] ... generic registers: 18 [ 0.096005] ... value mask: 000000ffffffffff [ 0.096005] ... max period: 0000007fffffffff [ 0.096005] ... fixed-purpose events: 0 [ 0.096005] ... event mask: 000000000003ffff [ 0.096005] CPU 1 irqstacks, hard=f34ae000 soft=f34b8000 [ 0.096005] Booting Node 0, Processors #1 [ 0.008000] Initializing CPU#1 [ 0.184036] Brought up 2 CPUs [ 0.184044] Total of 2 processors activated (11172.31 BogoMIPS). [ 0.184791] devtmpfs: initialized [ 0.186048] print_constraints: dummy: [ 0.186079] Time: 19:47:54 Date: 09/10/11 [ 0.186139] NET: Registered protocol family 16 [ 0.186188] Trying to unpack rootfs image as initramfs... [ 0.186405] EISA bus registered [ 0.186424] ACPI: bus type pci registered [ 0.186563] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.186571] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.186576] PCI: Using MMCONFIG for extended config space [ 0.186580] PCI: Using configuration type 1 for base access [ 0.190372] bio: create slab at 0 [ 0.192092] ACPI: EC: Look up EC in DSDT [ 0.205186] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.214723] ACPI: Interpreter enabled [ 0.214739] ACPI: (supports S0 S1 S3 S4 S5) [ 0.214794] ACPI: Using IOAPIC for interrupt routing [ 0.288213] ACPI: No dock devices found. [ 0.288220] HEST: Table not found. [ 0.288229] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.292287] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.300385] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.300393] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.300400] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.300406] pci_root PNP0A03:00: host bridge window [mem 0xbf700000-0xdfffffff] (ignored) [ 0.300413] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored) [ 0.300436] pci 0000:00:00.0: [8086:2580] type 0 class 0x000600 [ 0.300512] pci 0000:00:01.0: [8086:2581] type 1 class 0x000604 [ 0.300574] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.300582] pci 0000:00:01.0: PME# disabled [ 0.300609] pci 0000:00:02.0: [8086:2582] type 0 class 0x000300 [ 0.300629] pci 0000:00:02.0: reg 10: [mem 0xdff00000-0xdff7ffff] [ 0.300641] pci 0000:00:02.0: reg 14: [io 0xecd8-0xecdf] [ 0.300653] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref] [ 0.300666] pci 0000:00:02.0: reg 1c: [mem 0xdfec0000-0xdfefffff] [ 0.300723] pci 0000:00:02.1: [8086:2782] type 0 class 0x000380 [ 0.300742] pci 0000:00:02.1: reg 10: [mem 0xdff80000-0xdfffffff] [ 0.300867] pci 0000:00:1c.0: [8086:2660] type 1 class 0x000604 [ 0.300954] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.300962] pci 0000:00:1c.0: PME# disabled [ 0.300999] pci 0000:00:1c.1: [8086:2662] type 1 class 0x000604 [ 0.301081] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.301089] pci 0000:00:1c.1: PME# disabled [ 0.301128] pci 0000:00:1d.0: [8086:2658] type 0 class 0x000c03 [ 0.301187] pci 0000:00:1d.0: reg 20: [io 0xff80-0xff9f] [ 0.301233] pci 0000:00:1d.1: [8086:2659] type 0 class 0x000c03 [ 0.301291] pci 0000:00:1d.1: reg 20: [io 0xff60-0xff7f] [ 0.301337] pci 0000:00:1d.2: [8086:265a] type 0 class 0x000c03 [ 0.301395] pci 0000:00:1d.2: reg 20: [io 0xff40-0xff5f] [ 0.301441] pci 0000:00:1d.3: [8086:265b] type 0 class 0x000c03 [ 0.301501] pci 0000:00:1d.3: reg 20: [io 0xff20-0xff3f] [ 0.301561] pci 0000:00:1d.7: [8086:265c] type 0 class 0x000c03 [ 0.301592] pci 0000:00:1d.7: reg 10: [mem 0xffa80800-0xffa80bff] [ 0.301688] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.301696] pci 0000:00:1d.7: PME# disabled [ 0.301725] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.301805] pci 0000:00:1f.0: [8086:2640] type 0 class 0x000601 [ 0.301910] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0c00-0c7f [ 0.301918] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 00e0-00ef [ 0.301944] pci 0000:00:1f.1: [8086:266f] type 0 class 0x000101 [ 0.301967] pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7] [ 0.301983] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7] [ 0.302000] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177] [ 0.302017] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377] [ 0.302034] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf] [ 0.302094] pci 0000:00:1f.2: [8086:2651] type 0 class 0x000101 [ 0.302120] pci 0000:00:1f.2: reg 10: [io 0xfe00-0xfe07] [ 0.302135] pci 0000:00:1f.2: reg 14: [io 0xfe10-0xfe13] [ 0.302149] pci 0000:00:1f.2: reg 18: [io 0xfe20-0xfe27] [ 0.302163] pci 0000:00:1f.2: reg 1c: [io 0xfe30-0xfe33] [ 0.302176] pci 0000:00:1f.2: reg 20: [io 0xfea0-0xfeaf] [ 0.302220] pci 0000:00:1f.2: PME# supported from D3hot [ 0.302228] pci 0000:00:1f.2: PME# disabled [ 0.302250] pci 0000:00:1f.3: [8086:266a] type 0 class 0x000c05 [ 0.302320] pci 0000:00:1f.3: reg 20: [io 0xece0-0xecff] [ 0.302417] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.302425] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.302433] pci 0000:00:01.0: bridge window [mem 0xdfd00000-0xdfdfffff] [ 0.302441] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.302534] pci 0000:02:00.0: [14e4:1677] type 0 class 0x000200 [ 0.302569] pci 0000:02:00.0: reg 10: [mem 0xdfcf0000-0xdfcfffff 64bit] [ 0.302692] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.302702] pci 0000:02:00.0: PME# disabled [ 0.302726] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.302745] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.302753] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.302762] pci 0000:00:1c.0: bridge window [mem 0xdfc00000-0xdfcfffff] [ 0.302773] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.302837] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.302845] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) [ 0.302854] pci 0000:00:1c.1: bridge window [mem 0xdfb00000-0xdfbfffff] [ 0.302865] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.302916] pci 0000:04:00.0: [1102:0007] type 0 class 0x000401 [ 0.302943] pci 0000:04:00.0: reg 10: [io 0xdce0-0xdcff] [ 0.303035] pci 0000:04:00.0: supports D1 D2 [ 0.303066] pci 0000:04:02.0: [1814:0201] type 0 class 0x000280 [ 0.303093] pci 0000:04:02.0: reg 10: [mem 0xdfafe000-0xdfafffff] [ 0.303247] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode) [ 0.303256] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 0.303264] pci 0000:00:1e.0: bridge window [mem 0xdfa00000-0xdfafffff] [ 0.303276] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.303282] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.303289] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.303316] pci_bus 0000:00: on NUMA node 0 [ 0.303326] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.303842] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.304513] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] [ 0.304794] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT] [ 0.305077] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] [ 0.305362] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.739794] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 0.740216] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 0.740633] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15) [ 0.741033] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 0.741445] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 0.741856] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 0.742259] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 0.742663] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 0.742973] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.743005] vgaarb: loaded [ 0.743489] SCSI subsystem initialized [ 0.743614] libata version 3.00 loaded. [ 0.743726] usbcore: registered new interface driver usbfs [ 0.743755] usbcore: registered new interface driver hub [ 0.743817] usbcore: registered new device driver usb [ 0.744100] wmi: Mapper loaded [ 0.744105] PCI: Using ACPI for IRQ routing [ 0.744111] PCI: pci_cache_line_size set to 64 bytes [ 0.744243] reserve RAM buffer: 00000000bf686c00 - 00000000bfffffff [ 0.744478] NetLabel: Initializing [ 0.744482] NetLabel: domain hash size = 128 [ 0.744486] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.744508] NetLabel: unlabeled traffic allowed by default [ 0.744590] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.744599] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.744610] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.748145] Switching to clocksource hpet [ 0.751534] Switched to NOHz mode on CPU #0 [ 0.751680] Switched to NOHz mode on CPU #1 [ 0.765762] AppArmor: AppArmor Filesystem Enabled [ 0.765812] pnp: PnP ACPI init [ 0.765853] ACPI: bus type pnp registered [ 0.769933] pnp 00:00: [bus 00-ff] [ 0.769941] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.769947] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.769953] pnp 00:00: [io 0x0d00-0xffff window] [ 0.769959] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.769964] pnp 00:00: [mem 0x00000000 window] [ 0.769970] pnp 00:00: [mem 0xbf700000-0xdfffffff window] [ 0.769976] pnp 00:00: [mem 0xf0000000-0xfebfffff window] [ 0.770078] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.772291] pnp 00:01: [io 0x0060] [ 0.772297] pnp 00:01: [io 0x0064] [ 0.772303] pnp 00:01: [io 0x0062-0x0063] [ 0.772308] pnp 00:01: [io 0x0065-0x006f] [ 0.772313] pnp 00:01: [io 0x00e0-0x00ef] [ 0.772318] pnp 00:01: [io 0x0800-0x085f] [ 0.772323] pnp 00:01: [io 0x0c00-0x0c7f] [ 0.772328] pnp 00:01: [io 0x0860-0x08ff] [ 0.772450] system 00:01: [io 0x0800-0x085f] has been reserved [ 0.772457] system 00:01: [io 0x0c00-0x0c7f] has been reserved [ 0.772464] system 00:01: [io 0x0860-0x08ff] has been reserved [ 0.772472] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.772615] pnp 00:02: [io 0x0080-0x009f] [ 0.772622] pnp 00:02: [io 0x0000-0x001f] [ 0.772627] pnp 00:02: [io 0x00c0-0x00df] [ 0.772632] pnp 00:02: [dma 4] [ 0.772699] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.772817] pnp 00:03: [io 0x00f0-0x00ff] [ 0.772834] pnp 00:03: [irq 13] [ 0.772911] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.773027] pnp 00:04: [io 0x0061] [ 0.773095] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.773212] pnp 00:05: [io 0x0070-0x007f] [ 0.773224] pnp 00:05: [irq 8] [ 0.773297] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.776771] pnp 00:06: [io 0x03f0-0x03f5] [ 0.776777] pnp 00:06: [io 0x03f7] [ 0.776790] pnp 00:06: [irq 6] [ 0.776795] pnp 00:06: [dma 2] [ 0.777122] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.784047] pnp 00:07: [io 0x0378-0x037f] [ 0.784053] pnp 00:07: [io 0x0778-0x077f] [ 0.784067] pnp 00:07: [irq 7] [ 0.784072] pnp 00:07: [dma 3] [ 0.784709] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.787427] pnp 00:08: [io 0x03f8-0x03ff] [ 0.787441] pnp 00:08: [irq 4] [ 0.787714] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.802371] pnp 00:09: [mem 0x00000000-0x0009ffff] [ 0.802379] pnp 00:09: [mem 0x00100000-0x00ffffff] [ 0.802385] pnp 00:09: [mem 0x01000000-0xbf686bff] [ 0.802390] pnp 00:09: [mem 0x000c0000-0x000fffff] [ 0.802395] pnp 00:09: [mem 0xfec00000-0xfecfffff] [ 0.802401] pnp 00:09: [mem 0xfee00000-0xfeefffff] [ 0.802406] pnp 00:09: [mem 0xfed20000-0xfed9ffff] [ 0.802412] pnp 00:09: [mem 0xffb00000-0xffbfffff] [ 0.802417] pnp 00:09: [mem 0xffc00000-0xffffffff] [ 0.802578] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.802587] system 00:09: [mem 0x00100000-0x00ffffff] could not be reserved [ 0.802594] system 00:09: [mem 0x01000000-0xbf686bff] could not be reserved [ 0.802601] system 00:09: [mem 0x000c0000-0x000fffff] could not be reserved [ 0.802608] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 0.802615] system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.802622] system 00:09: [mem 0xfed20000-0xfed9ffff] has been reserved [ 0.802628] system 00:09: [mem 0xffb00000-0xffbfffff] has been reserved [ 0.802636] system 00:09: [mem 0xffc00000-0xffffffff] has been reserved [ 0.802645] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.803797] pnp 00:0a: [mem 0xe0000000-0xefffffff] [ 0.803804] pnp 00:0a: [mem 0xfeda0000-0xfedacfff] [ 0.803809] pnp 00:0a: [io 0x0100-0x01fe] [ 0.803814] pnp 00:0a: [io 0x0200-0x0277] [ 0.803819] pnp 00:0a: [io 0x0280-0x02e7] [ 0.803824] pnp 00:0a: [io 0x02f0-0x02f7] [ 0.803829] pnp 00:0a: [io 0x0300-0x0377] [ 0.803834] pnp 00:0a: [io 0x0380-0x03bb] [ 0.803838] pnp 00:0a: [io 0x03c0-0x03e7] [ 0.803843] pnp 00:0a: [io 0x03f6-0x03f7] [ 0.803848] pnp 00:0a: [io 0x0400-0x04cf] [ 0.803853] pnp 00:0a: [io 0x04d2-0x057f] [ 0.803857] pnp 00:0a: [io 0x0580-0x0677] [ 0.803862] pnp 00:0a: [io 0x0680-0x0777] [ 0.803867] pnp 00:0a: [io 0x0780-0x07bb] [ 0.803872] pnp 00:0a: [io 0x07c0-0x07ff] [ 0.803877] pnp 00:0a: [io 0x08e0-0x08ff] [ 0.803885] pnp 00:0a: [io 0x0900-0x09fe] [ 0.803890] pnp 00:0a: [io 0x0a00-0x0afe] [ 0.803894] pnp 00:0a: [io 0x0b00-0x0bfe] [ 0.803899] pnp 00:0a: [io 0x0c80-0x0caf] [ 0.803904] pnp 00:0a: [io 0x0cc0-0x0cf7] [ 0.803908] pnp 00:0a: [io 0x0d00-0x0dfe] [ 0.803913] pnp 00:0a: [io 0x0e00-0x0efe] [ 0.803918] pnp 00:0a: [io 0x0f00-0x0ffe] [ 0.803923] pnp 00:0a: [io 0x2000-0x20fe] [ 0.803927] pnp 00:0a: [io 0x2100-0x21fe] [ 0.803932] pnp 00:0a: [io 0x2200-0x22fe] [ 0.803937] pnp 00:0a: [io 0x2300-0x23fe] [ 0.803942] pnp 00:0a: [io 0x2400-0x24fe] [ 0.803947] pnp 00:0a: [io 0x2500-0x25fe] [ 0.803952] pnp 00:0a: [io 0x2600-0x26fe] [ 0.803957] pnp 00:0a: [io 0x2700-0x27fe] [ 0.803962] pnp 00:0a: [io 0x2800-0x28fe] [ 0.803967] pnp 00:0a: [io 0x2900-0x29fe] [ 0.803972] pnp 00:0a: [io 0x2a00-0x2afe] [ 0.803977] pnp 00:0a: [io 0x2b00-0x2bfe] [ 0.803982] pnp 00:0a: [io 0x2c00-0x2cfe] [ 0.803987] pnp 00:0a: [io 0x2d00-0x2dfe] [ 0.803992] pnp 00:0a: [io 0x2e00-0x2efe] [ 0.804020] pnp 00:0a: [io 0x2f00-0x2ffe] [ 0.804026] pnp 00:0a: [io 0x5000-0x50fe] [ 0.804030] pnp 00:0a: [io 0x5100-0x51fe] [ 0.804035] pnp 00:0a: [io 0x5200-0x52fe] [ 0.804040] pnp 00:0a: [io 0x5300-0x53fe] [ 0.804045] pnp 00:0a: [io 0x5400-0x54fe] [ 0.804050] pnp 00:0a: [io 0x5500-0x55fe] [ 0.804054] pnp 00:0a: [io 0x5600-0x56fe] [ 0.804059] pnp 00:0a: [io 0x5700-0x57fe] [ 0.804064] pnp 00:0a: [io 0x5800-0x58fe] [ 0.804069] pnp 00:0a: [io 0x5900-0x59fe] [ 0.804074] pnp 00:0a: [io 0x5a00-0x5afe] [ 0.804079] pnp 00:0a: [io 0x5b00-0x5bfe] [ 0.804083] pnp 00:0a: [io 0x5c00-0x5cfe] [ 0.804088] pnp 00:0a: [io 0x5d00-0x5dfe] [ 0.804093] pnp 00:0a: [io 0x5e00-0x5efe] [ 0.804098] pnp 00:0a: [io 0x5f00-0x5ffe] [ 0.804102] pnp 00:0a: [io 0x6000-0x60fe] [ 0.804107] pnp 00:0a: [io 0x6100-0x61fe] [ 0.804112] pnp 00:0a: [io 0x6200-0x62fe] [ 0.804117] pnp 00:0a: [io 0x6300-0x63fe] [ 0.804122] pnp 00:0a: [io 0x6400-0x64fe] [ 0.804127] pnp 00:0a: [io 0x6500-0x65fe] [ 0.804131] pnp 00:0a: [io 0x6600-0x66fe] [ 0.804136] pnp 00:0a: [io 0x6700-0x67fe] [ 0.804141] pnp 00:0a: [io 0x6800-0x68fe] [ 0.804146] pnp 00:0a: [io 0x6900-0x69fe] [ 0.804151] pnp 00:0a: [io 0x6a00-0x6afe] [ 0.804156] pnp 00:0a: [io 0x6b00-0x6bfe] [ 0.804161] pnp 00:0a: [io 0x6c00-0x6cfe] [ 0.804165] pnp 00:0a: [io 0x6d00-0x6dfe] [ 0.804170] pnp 00:0a: [io 0x6e00-0x6efe] [ 0.804175] pnp 00:0a: [io 0x6f00-0x6ffe] [ 0.804180] pnp 00:0a: [io 0xa000-0xa0fe] [ 0.804185] pnp 00:0a: [io 0xa100-0xa1fe] [ 0.804190] pnp 00:0a: [io 0xa200-0xa2fe] [ 0.804195] pnp 00:0a: [io 0xa300-0xa3fe] [ 0.804200] pnp 00:0a: [io 0xa400-0xa4fe] [ 0.804204] pnp 00:0a: [io 0xa500-0xa5fe] [ 0.804209] pnp 00:0a: [io 0xa600-0xa6fe] [ 0.804214] pnp 00:0a: [io 0xa700-0xa7fe] [ 0.804221] pnp 00:0a: [io 0xa800-0xa8fe] [ 0.804226] pnp 00:0a: [io 0xa900-0xa9fe] [ 0.804231] pnp 00:0a: [io 0xaa00-0xaafe] [ 0.804236] pnp 00:0a: [io 0xab00-0xabfe] [ 0.804241] pnp 00:0a: [io 0xac00-0xacfe] [ 0.804245] pnp 00:0a: [io 0xad00-0xadfe] [ 0.804250] pnp 00:0a: [io 0xae00-0xaefe] [ 0.804255] pnp 00:0a: [io 0xaf00-0xaffe] [ 0.804794] system 00:0a: [io 0x0100-0x01fe] could not be reserved [ 0.804801] system 00:0a: [io 0x0200-0x0277] has been reserved [ 0.804807] system 00:0a: [io 0x0280-0x02e7] has been reserved [ 0.804813] system 00:0a: [io 0x02f0-0x02f7] has been reserved [ 0.804820] system 00:0a: [io 0x0300-0x0377] could not be reserved [ 0.804826] system 00:0a: [io 0x0380-0x03bb] has been reserved [ 0.804832] system 00:0a: [io 0x03c0-0x03e7] has been reserved [ 0.804839] system 00:0a: [io 0x03f6-0x03f7] could not be reserved [ 0.804845] system 00:0a: [io 0x0400-0x04cf] has been reserved [ 0.804851] system 00:0a: [io 0x04d2-0x057f] has been reserved [ 0.804858] system 00:0a: [io 0x0580-0x0677] has been reserved [ 0.804864] system 00:0a: [io 0x0680-0x0777] has been reserved [ 0.804870] system 00:0a: [io 0x0780-0x07bb] has been reserved [ 0.804876] system 00:0a: [io 0x07c0-0x07ff] has been reserved [ 0.804883] system 00:0a: [io 0x08e0-0x08ff] has been reserved [ 0.804889] system 00:0a: [io 0x0900-0x09fe] has been reserved [ 0.804895] system 00:0a: [io 0x0a00-0x0afe] has been reserved [ 0.804902] system 00:0a: [io 0x0b00-0x0bfe] has been reserved [ 0.804908] system 00:0a: [io 0x0c80-0x0caf] has been reserved [ 0.804914] system 00:0a: [io 0x0cc0-0x0cf7] has been reserved [ 0.804921] system 00:0a: [io 0x0d00-0x0dfe] has been reserved [ 0.804927] system 00:0a: [io 0x0e00-0x0efe] has been reserved [ 0.804933] system 00:0a: [io 0x0f00-0x0ffe] has been reserved [ 0.804940] system 00:0a: [io 0x2000-0x20fe] has been reserved [ 0.804946] system 00:0a: [io 0x2100-0x21fe] has been reserved [ 0.804953] system 00:0a: [io 0x2200-0x22fe] has been reserved [ 0.804959] system 00:0a: [io 0x2300-0x23fe] has been reserved [ 0.804965] system 00:0a: [io 0x2400-0x24fe] has been reserved [ 0.804972] system 00:0a: [io 0x2500-0x25fe] has been reserved [ 0.804978] system 00:0a: [io 0x2600-0x26fe] has been reserved [ 0.804985] system 00:0a: [io 0x2700-0x27fe] has been reserved [ 0.804991] system 00:0a: [io 0x2800-0x28fe] has been reserved [ 0.804998] system 00:0a: [io 0x2900-0x29fe] has been reserved [ 0.805004] system 00:0a: [io 0x2a00-0x2afe] has been reserved [ 0.805011] system 00:0a: [io 0x2b00-0x2bfe] has been reserved [ 0.805017] system 00:0a: [io 0x2c00-0x2cfe] has been reserved [ 0.805024] system 00:0a: [io 0x2d00-0x2dfe] has been reserved [ 0.805031] system 00:0a: [io 0x2e00-0x2efe] has been reserved [ 0.805037] system 00:0a: [io 0x2f00-0x2ffe] has been reserved [ 0.805044] system 00:0a: [io 0x5000-0x50fe] has been reserved [ 0.805051] system 00:0a: [io 0x5100-0x51fe] has been reserved [ 0.805057] system 00:0a: [io 0x5200-0x52fe] has been reserved [ 0.805064] system 00:0a: [io 0x5300-0x53fe] has been reserved [ 0.805070] system 00:0a: [io 0x5400-0x54fe] has been reserved [ 0.805077] system 00:0a: [io 0x5500-0x55fe] has been reserved [ 0.805084] system 00:0a: [io 0x5600-0x56fe] has been reserved [ 0.805090] system 00:0a: [io 0x5700-0x57fe] has been reserved [ 0.805097] system 00:0a: [io 0x5800-0x58fe] has been reserved [ 0.805104] system 00:0a: [io 0x5900-0x59fe] has been reserved [ 0.805111] system 00:0a: [io 0x5a00-0x5afe] has been reserved [ 0.805117] system 00:0a: [io 0x5b00-0x5bfe] has been reserved [ 0.805124] system 00:0a: [io 0x5c00-0x5cfe] has been reserved [ 0.805131] system 00:0a: [io 0x5d00-0x5dfe] has been reserved [ 0.805138] system 00:0a: [io 0x5e00-0x5efe] has been reserved [ 0.805145] system 00:0a: [io 0x5f00-0x5ffe] has been reserved [ 0.805152] system 00:0a: [io 0x6000-0x60fe] has been reserved [ 0.805159] system 00:0a: [io 0x6100-0x61fe] has been reserved [ 0.805166] system 00:0a: [io 0x6200-0x62fe] has been reserved [ 0.805173] system 00:0a: [io 0x6300-0x63fe] has been reserved [ 0.805180] system 00:0a: [io 0x6400-0x64fe] has been reserved [ 0.805187] system 00:0a: [io 0x6500-0x65fe] has been reserved [ 0.805195] system 00:0a: [io 0x6600-0x66fe] has been reserved [ 0.805204] system 00:0a: [io 0x6700-0x67fe] has been reserved [ 0.805212] system 00:0a: [io 0x6800-0x68fe] has been reserved [ 0.805221] system 00:0a: [io 0x6900-0x69fe] has been reserved [ 0.805229] system 00:0a: [io 0x6a00-0x6afe] has been reserved [ 0.805237] system 00:0a: [io 0x6b00-0x6bfe] has been reserved [ 0.805246] system 00:0a: [io 0x6c00-0x6cfe] has been reserved [ 0.805255] system 00:0a: [io 0x6d00-0x6dfe] has been reserved [ 0.805263] system 00:0a: [io 0x6e00-0x6efe] has been reserved [ 0.805271] system 00:0a: [io 0x6f00-0x6ffe] has been reserved [ 0.805278] system 00:0a: [io 0xa000-0xa0fe] has been reserved [ 0.805286] system 00:0a: [io 0xa100-0xa1fe] has been reserved [ 0.805294] system 00:0a: [io 0xa200-0xa2fe] has been reserved [ 0.805301] system 00:0a: [io 0xa300-0xa3fe] has been reserved [ 0.805309] system 00:0a: [io 0xa400-0xa4fe] has been reserved [ 0.805317] system 00:0a: [io 0xa500-0xa5fe] has been reserved [ 0.805324] system 00:0a: [io 0xa600-0xa6fe] has been reserved [ 0.805332] system 00:0a: [io 0xa700-0xa7fe] has been reserved [ 0.805340] system 00:0a: [io 0xa800-0xa8fe] has been reserved [ 0.805348] system 00:0a: [io 0xa900-0xa9fe] has been reserved [ 0.805355] system 00:0a: [io 0xaa00-0xaafe] has been reserved [ 0.805363] system 00:0a: [io 0xab00-0xabfe] has been reserved [ 0.805371] system 00:0a: [io 0xac00-0xacfe] has been reserved [ 0.805379] system 00:0a: [io 0xad00-0xadfe] has been reserved [ 0.805386] system 00:0a: [io 0xae00-0xaefe] has been reserved [ 0.805394] system 00:0a: [io 0xaf00-0xaffe] has been reserved [ 0.805403] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 0.805410] system 00:0a: [mem 0xfeda0000-0xfedacfff] has been reserved [ 0.805419] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.805543] pnp 00:0b: [mem 0xfed00000-0xfed003ff] [ 0.805629] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.805644] pnp: PnP ACPI: found 12 devices [ 0.805648] ACPI: ACPI bus type pnp unregistered [ 0.805655] PnPBIOS: Disabled by ACPI PNP [ 0.845002] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0000000-0xd01fffff 64bit pref] [ 0.845015] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.845022] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.845027] pci 0000:00:01.0: bridge window [io disabled] [ 0.845035] pci 0000:00:01.0: bridge window [mem 0xdfd00000-0xdfdfffff] [ 0.845042] pci 0000:00:01.0: bridge window [mem pref disabled] [ 0.845051] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.845058] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.845068] pci 0000:00:1c.0: bridge window [mem 0xdfc00000-0xdfcfffff] [ 0.845076] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref] [ 0.845087] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.845092] pci 0000:00:1c.1: bridge window [io disabled] [ 0.845101] pci 0000:00:1c.1: bridge window [mem 0xdfb00000-0xdfbfffff] [ 0.845108] pci 0000:00:1c.1: bridge window [mem pref disabled] [ 0.845119] pci 0000:00:1e.0: PCI bridge to [bus 04-04] [ 0.845126] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 0.845136] pci 0000:00:1e.0: bridge window [mem 0xdfa00000-0xdfafffff] [ 0.845143] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.845184] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.845196] pci 0000:00:01.0: setting latency timer to 64 [ 0.845211] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.845221] pci 0000:00:1c.0: setting latency timer to 64 [ 0.845244] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.845253] pci 0000:00:1c.1: setting latency timer to 64 [ 0.845266] pci 0000:00:1e.0: setting latency timer to 64 [ 0.845276] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.845282] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.845289] pci_bus 0000:01: resource 1 [mem 0xdfd00000-0xdfdfffff] [ 0.845296] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.845301] pci_bus 0000:02: resource 1 [mem 0xdfc00000-0xdfcfffff] [ 0.845308] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd01fffff 64bit pref] [ 0.845314] pci_bus 0000:03: resource 1 [mem 0xdfb00000-0xdfbfffff] [ 0.845320] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.845326] pci_bus 0000:04: resource 1 [mem 0xdfa00000-0xdfafffff] [ 0.845331] pci_bus 0000:04: resource 4 [io 0x0000-0xffff] [ 0.845337] pci_bus 0000:04: resource 5 [mem 0x00000000-0xffffffff] [ 0.845413] NET: Registered protocol family 2 [ 0.845598] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.846083] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.846764] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.847127] TCP: Hash tables configured (established 131072 bind 65536) [ 0.847133] TCP reno registered [ 0.847140] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.847154] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.847413] NET: Registered protocol family 1 [ 0.847449] pci 0000:00:02.0: Boot video device [ 0.847603] PCI: CLS 64 bytes, default 64 [ 0.847645] Simple Boot Flag at 0x7a set to 0x1 [ 0.848035] cpufreq-nforce2: No nForce2 chipset. [ 0.848315] audit: initializing netlink socket (disabled) [ 0.848333] type=2000 audit(1315684074.844:1): initialized [ 0.863716] highmem bounce pool size: 64 pages [ 0.863728] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.868225] VFS: Disk quotas dquot_6.5.2 [ 0.868386] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.870091] fuse init (API version 7.16) [ 0.870317] msgmni has been set to 1393 [ 0.870873] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.870932] io scheduler noop registered [ 0.870937] io scheduler deadline registered [ 0.870975] io scheduler cfq registered (default) [ 0.871215] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.871279] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.871382] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.871442] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.871547] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.871605] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X [ 0.871786] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.871846] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.872193] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.936042] ACPI: Power Button [VBTN] [ 0.936199] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.936210] ACPI: Power Button [PWRF] [ 0.936717] ACPI: acpi_idle registered with cpuidle [ 0.978412] ERST: Table is not found! [ 0.978552] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.999028] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.999292] isapnp: Scanning for PnP cards... [ 1.055653] Freeing initrd memory: 13820k freed [ 1.352585] isapnp: No Plug & Play device found [ 1.379320] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.379865] Linux agpgart interface v0.103 [ 1.379988] agpgart-intel 0000:00:00.0: Intel 915G Chipset [ 1.380113] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable [ 1.380525] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 1.380679] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 [ 1.382864] brd: module loaded [ 1.383875] loop: module loaded [ 1.384055] i2c-core: driver [adp5520] using legacy suspend method [ 1.384059] i2c-core: driver [adp5520] using legacy resume method [ 1.384212] ata_piix 0000:00:1f.1: version 2.13 [ 1.384228] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.384278] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.384840] scsi0 : ata_piix [ 1.384995] scsi1 : ata_piix [ 1.385094] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 1.385099] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 1.385150] ata_piix 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 1.385162] ata_piix 0000:00:1f.2: MAP [ P0 [ 1.385168] ata2: port disabled. ignoring. [ 1.385172] P2 P1 P3 ] [ 1.540037] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.540717] scsi2 : ata_piix [ 1.540847] scsi3 : ata_piix [ 1.540930] ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 20 [ 1.540935] ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 20 [ 1.541580] Fixed MDIO Bus: probed [ 1.541645] PPP generic driver version 2.4.2 [ 1.541733] tun: Universal TUN/TAP device driver, 1.6 [ 1.541736] tun: (C) 1999-2004 Max Krasnyansky [ 1.541900] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.541935] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.541957] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.541963] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.542026] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.544080] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.547971] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 1.547995] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800 [ 1.564020] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.564228] hub 1-0:1.0: USB hub found [ 1.564235] hub 1-0:1.0: 8 ports detected [ 1.564373] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.564397] uhci_hcd: USB Universal Host Controller Interface driver [ 1.564444] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.564455] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.564460] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.564525] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.564586] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80 [ 1.564805] hub 2-0:1.0: USB hub found [ 1.564813] hub 2-0:1.0: 2 ports detected [ 1.564936] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 1.564946] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.564950] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.565023] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.568322] ata1.00: ATAPI: ATAPI DVD A DH20A4P, 9P59, max UDMA/66 [ 1.568329] ata1.00: limited to UDMA/33 due to 40-wire cable [ 1.568544] uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60 [ 1.568758] hub 3-0:1.0: USB hub found [ 1.568766] hub 3-0:1.0: 2 ports detected [ 1.568887] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.568897] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.568902] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.568966] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.569039] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 [ 1.569247] hub 4-0:1.0: USB hub found [ 1.569255] hub 4-0:1.0: 2 ports detected [ 1.569373] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 1.569383] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.569388] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.569455] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.569530] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20 [ 1.569735] hub 5-0:1.0: USB hub found [ 1.569742] hub 5-0:1.0: 2 ports detected [ 1.569951] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.572839] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.572850] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.573104] mousedev: PS/2 mouse device common for all mice [ 1.573337] rtc_cmos 00:05: RTC can wake from S4 [ 1.573451] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.573481] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs [ 1.573622] device-mapper: uevent: version 1.0.3 [ 1.573761] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 1.573862] device-mapper: multipath: version 1.2.0 loaded [ 1.573868] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.573989] EISA: Probing bus 0 at eisa.0 [ 1.573994] EISA: Cannot allocate resource for mainboard [ 1.573999] Cannot allocate resource for EISA slot 1 [ 1.574002] Cannot allocate resource for EISA slot 2 [ 1.574013] Cannot allocate resource for EISA slot 5 [ 1.574016] Cannot allocate resource for EISA slot 6 [ 1.574027] EISA: Detected 0 cards. [ 1.574122] cpuidle: using governor ladder [ 1.574128] cpuidle: using governor menu [ 1.574628] TCP cubic registered [ 1.574856] NET: Registered protocol family 10 [ 1.575932] NET: Registered protocol family 17 [ 1.575962] Registering the dns_resolver key type [ 1.576103] Using IPI No-Shortcut mode [ 1.576324] PM: Hibernation image not present or could not be loaded. [ 1.576342] registered taskstats version 1 [ 1.576655] Magic number: 11:22:799 [ 1.576745] rtc_cmos 00:05: setting system clock to 2011-09-10 19:47:56 UTC (1315684076) [ 1.576750] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.576753] EDD information not available. [ 1.600199] ata1.00: configured for UDMA/33 [ 1.601997] scsi 0:0:0:0: CD-ROM ATAPI DVD A DH20A4P 9P59 PQ: 0 ANSI: 5 [ 1.604766] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.604772] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.604947] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.605057] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.712144] ata3.00: ATA-7: WDC WD800JD-08MSA1, 10.01E01, max UDMA/133 [ 1.712150] ata3.00: 156312576 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 1.712159] ata3.01: ATA-7: MAXTOR STM3320620AS, 3.AAE, max UDMA/133 [ 1.712163] ata3.01: 625142448 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 1.720145] ata3.00: configured for UDMA/133 [ 1.736144] ata3.01: configured for UDMA/133 [ 1.736307] scsi 2:0:0:0: Direct-Access ATA WDC WD800JD-08MS 10.0 PQ: 0 ANSI: 5 [ 1.736530] sd 2:0:0:0: [sda] 156312576 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.736605] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.736669] sd 2:0:0:0: [sda] Write Protect is off [ 1.736676] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.736735] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.736851] scsi 2:0:1:0: Direct-Access ATA MAXTOR STM332062 3.AA PQ: 0 ANSI: 5 [ 1.737137] sd 2:0:1:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.737203] sd 2:0:1:0: Attached scsi generic sg2 type 0 [ 1.737272] sd 2:0:1:0: [sdb] Write Protect is off [ 1.737279] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.737345] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.775088] sda: sda1 sda2 < sda5 > [ 1.795168] sdb: sdb1 [ 1.795669] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.795717] sd 2:0:1:0: [sdb] Attached SCSI disk [ 1.844023] Refined TSC clocksource calibration: 2792.999 MHz. [ 1.844031] Switching to clocksource tsc [ 2.116019] usb 4-1: new low speed USB device using uhci_hcd and address 2 [ 2.560018] usb 4-2: new low speed USB device using uhci_hcd and address 3 [ 5.728122] Freeing unused kernel memory: 700k freed [ 5.728504] Write protecting the kernel text: 5192k [ 5.728576] Write protecting the kernel read-only data: 2148k [ 5.764614] <30>udev[71]: starting version 167 [ 5.880586] Btrfs loaded [ 6.046854] Floppy drive(s): fd0 is 1.44M [ 6.075189] FDC 0 is a post-1991 82077 [ 6.098281] tg3.c:v3.116 (December 3, 2010) [ 6.098306] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.098324] tg3 0000:02:00.0: setting latency timer to 64 [ 6.148266] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input2 [ 6.148489] generic-usb 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.2-1/input0 [ 6.161509] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95751) rev 4001] (PCI Express) MAC address 00:11:43:25:f7:97 [ 6.161516] tg3 0000:02:00.0: eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 6.161521] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 6.161526] tg3 0000:02:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 6.187230] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.1/input/input3 [ 6.187501] generic-usb 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.2-1/input1 [ 6.202832] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input4 [ 6.203113] generic-usb 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.2-2/input0 [ 6.203155] usbcore: registered new interface driver usbhid [ 6.203161] usbhid: USB HID core driver [ 6.320026] end_request: I/O error, dev fd0, sector 0 [ 6.459575] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 20.686881] <30>udev[292]: starting version 167 [ 20.703323] Adding 3133436k swap on /dev/sda5. Priority:-1 extents:1 across:3133436k [ 20.731881] lp: driver loaded but no devices found [ 20.867100] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 21.051279] intel_rng: Firmware space is locked read-only. If you can't or [ 21.051284] intel_rng: don't want to disable this in firmware setup, and if [ 21.051287] intel_rng: you are certain that your system has a functional [ 21.051290] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 21.136880] type=1400 audit(1315684096.057:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=487 comm="apparmor_parser" [ 21.138100] type=1400 audit(1315684096.057:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=487 comm="apparmor_parser" [ 21.138872] type=1400 audit(1315684096.057:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=487 comm="apparmor_parser" [ 21.191512] parport_pc 00:07: reported by Plug and Play ACPI [ 21.191577] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 21.292410] lp0: using parport0 (interrupt-driven). [ 21.632082] [drm] Initialized drm 1.1.0 20060810 [ 21.639256] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 21.680278] cfg80211: Calling CRDA to update world regulatory domain [ 21.743697] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 21.908049] type=1400 audit(1315684096.829:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=664 comm="apparmor_parser" [ 21.937741] type=1400 audit(1315684096.857:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=665 comm="apparmor_parser" [ 21.942442] type=1400 audit(1315684096.861:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=665 comm="apparmor_parser" [ 21.943205] type=1400 audit(1315684096.861:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=665 comm="apparmor_parser" [ 21.966728] type=1400 audit(1315684096.885:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=666 comm="apparmor_parser" [ 21.970976] type=1400 audit(1315684096.889:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/freshclam" pid=671 comm="apparmor_parser" [ 21.990744] type=1400 audit(1315684096.909:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=666 comm="apparmor_parser" [ 22.472702] ppdev: user-space parallel port driver [ 22.484255] cfg80211: World regulatory domain updated: [ 22.484263] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 22.484270] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 22.484278] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 22.484285] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 22.484291] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 22.484299] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 22.637451] rt2500pci 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 22.657926] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 22.657938] i915 0000:00:02.0: setting latency timer to 64 [ 22.720749] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 22.720759] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 22.720767] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 22.720774] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 22.720780] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 22.720787] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 22.720793] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 22.720799] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 22.720804] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 22.720810] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 22.720815] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 22.720821] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 22.720827] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 22.720833] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 22.720838] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 22.720844] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 22.720849] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 22.720855] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 22.720861] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 22.720867] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 22.720872] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 22.720878] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 22.720884] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 22.720890] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 22.720896] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 22.720902] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 22.720908] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 22.720916] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm) [ 22.811206] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 22.811214] [drm] Driver supports precise vblank timestamp query. [ 22.816493] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 22.819635] Registered led device: rt2500pci-phy0::radio [ 22.819838] Registered led device: rt2500pci-phy0::quality [ 22.819983] CA0106 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 22.820581] snd-ca0106: Model 1012 Rev 00000000 Serial 10121102 [ 22.884295] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 22.884796] [drm] initialized overlay support [ 23.068393] apm: BIOS not found. [ 23.079793] fbcon: inteldrmfb (fb0) is primary device [ 23.080914] Console: switching to colour frame buffer device 128x48 [ 23.080967] fb0: inteldrmfb frame buffer device [ 23.080972] drm: registered panic notifier [ 23.081258] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 23.469768] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex [ 23.469777] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX [ 23.470079] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 27.536651] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 33.760324] EXT3-fs: barriers not enabled [ 33.760444] kjournald starting. Commit interval 5 seconds [ 33.760512] EXT3-fs (loop0): using internal journal [ 33.760520] EXT3-fs (loop0): mounted filesystem with ordered data mode [ 34.320016] eth0: no IPv6 routers present [ 78.132431] tg3 0000:02:00.0: PME# enabled [ 78.132452] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI [ 149.304045] tg3 0000:02:00.0: BAR 0: set to [mem 0xdfcf0000-0xdfcfffff 64bit] (PCI address [0xdfcf0000-0xdfcfffff]) [ 149.333658] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 150.942577] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex [ 150.942583] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX [ 150.942742] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 161.344019] eth0: no IPv6 routers present [ 342.356041] tg3 0000:02:00.0: BAR 0: set to [mem 0xdfcf0000-0xdfcfffff 64bit] (PCI address [0xdfcf0000-0xdfcfffff]) [ 342.385599] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 343.999941] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex [ 343.999947] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX [ 344.000225] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 354.864010] eth0: no IPv6 routers present [ 2970.416049] tg3 0000:02:00.0: BAR 0: set to [mem 0xdfcf0000-0xdfcfffff 64bit] (PCI address [0xdfcf0000-0xdfcfffff]) [ 2970.445918] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2972.054576] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex [ 2972.054582] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX [ 2972.054740] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 2982.208021] eth0: no IPv6 routers present [ 3075.168052] tg3 0000:02:00.0: BAR 0: set to [mem 0xdfcf0000-0xdfcfffff 64bit] (PCI address [0xdfcf0000-0xdfcfffff]) [ 3075.197791] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3076.848536] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex [ 3076.848543] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX [ 3076.848703] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 3087.776008] eth0: no IPv6 routers present [ 3533.328042] tg3 0000:02:00.0: BAR 0: set to [mem 0xdfcf0000-0xdfcfffff 64bit] (PCI address [0xdfcf0000-0xdfcfffff]) [ 3533.357695] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3535.000525] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex [ 3535.000531] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX [ 3535.000694] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 3545.888014] eth0: no IPv6 routers present [ 4294.532054] tg3 0000:02:00.0: BAR 0: set to [mem 0xdfcf0000-0xdfcfffff 64bit] (PCI address [0xdfcf0000-0xdfcfffff]) [ 4294.561759] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4296.205652] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex [ 4296.205659] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX [ 4296.205821] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 4306.912014] eth0: no IPv6 routers present [ 5013.368042] tg3 0000:02:00.0: BAR 0: set to [mem 0xdfcf0000-0xdfcfffff 64bit] (PCI address [0xdfcf0000-0xdfcfffff]) [ 5013.397926] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5015.046843] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex [ 5015.046849] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX [ 5015.047010] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 5025.904014] eth0: no IPv6 routers present [ 5173.788073] tg3 0000:02:00.0: BAR 0: set to [mem 0xdfcf0000-0xdfcfffff 64bit] (PCI address [0xdfcf0000-0xdfcfffff]) [ 5173.817780] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5175.441769] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex [ 5175.441775] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX [ 5175.441935] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 5186.384011] eth0: no IPv6 routers present [ 5402.264045] tg3 0000:02:00.0: BAR 0: set to [mem 0xdfcf0000-0xdfcfffff 64bit] (PCI address [0xdfcf0000-0xdfcfffff]) [ 5402.293608] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5403.948370] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex [ 5403.948376] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX [ 5403.948536] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 5414.544009] eth0: no IPv6 routers present [ 5416.112866] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5432.413740] wlan0: authenticate with 00:1c:df:18:68:ea (try 1) [ 5432.415264] wlan0: authenticated [ 5432.415950] wlan0: associate with 00:1c:df:18:68:ea (try 1) [ 5432.418040] wlan0: RX AssocResp from 00:1c:df:18:68:ea (capab=0x411 status=0 aid=1) [ 5432.418048] wlan0: associated [ 5432.419041] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 5442.504014] wlan0: no IPv6 routers present [ 5940.518954] EXT4-fs (sdb1): warning: maximal mount count reached, running e2fsck is recommended [ 5940.561309] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 7939.148280] audit_printk_skb: 21 callbacks suppressed [ 7939.148285] type=1400 audit(1315692013.461:19): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=19117 comm="apparmor_parser" [ 7939.307690] type=1400 audit(1315692013.617:20): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=19141 comm="apparmor_parser"