[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-45-generic (buildd@phianna) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #74-Ubuntu SMP Tue Jan 13 19:36:28 UTC 2015 (Ubuntu 3.13.0-45.74-generic 3.13.11-ckt13) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-45-generic root=UUID=3ddfd631-9ba6-4e81-81fc-1aec7fa4bb9e ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006f9f0fff] usable [ 0.000000] BIOS-e820: [mem 0x000000006f9f1000-0x000000006facefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000006facf000-0x000000006fbcefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000006fbcf000-0x000000006fbfefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000006fbff000-0x000000006fbfffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Hewlett-Packard HP 425/1475, BIOS 68DVA Ver. F.21 06/15/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x6fc00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFFC0000000 write-back [ 0.000000] 1 base 000040000000 mask FFFFE0000000 write-back [ 0.000000] 2 base 000060000000 mask FFFFF0000000 write-back [ 0.000000] 3 base 0000FFE00000 mask FFFFFFE00000 write-protect [ 0.000000] 4 base 0000FFF40000 mask FFFFFFFF0000 write-protect [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE [ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE [ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x6f600000-0x6f7fffff] [ 0.000000] [mem 0x6f600000-0x6f7fffff] page 2M [ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x6c000000-0x6f5fffff] [ 0.000000] [mem 0x6c000000-0x6f5fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x6bffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x6bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x6f800000-0x6f9f0fff] [ 0.000000] [mem 0x6f800000-0x6f9f0fff] page 4k [ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x6fbff000-0x6fbfffff] [ 0.000000] [mem 0x6fbff000-0x6fbfffff] page 4k [ 0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x35b4c000-0x36d9dfff] [ 0.000000] ACPI: RSDP 00000000000f2a70 000014 (v00 HPQOEM) [ 0.000000] ACPI: RSDT 000000006fbfe038 000038 (v01 HPQOEM SLIC-MPC 00000003 01000013) [ 0.000000] ACPI: FACP 000000006fbfd000 000074 (v01 HPQOEM 307E 00000003 HP 00000001) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131115/tbfadt-603) [ 0.000000] ACPI: DSDT 000000006fbde000 01BA1C (v01 HPQOEM SB700 00000001 INTL 20060912) [ 0.000000] ACPI: FACS 000000006fb8f000 000040 [ 0.000000] ACPI: APIC 000000006fbfc000 000084 (v01 HPQOEM 307E 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 000000006fbfb000 00003C (v01 HPQOEM 307E 00000001 HP 00000001) [ 0.000000] ACPI: HPET 000000006fbdb000 000038 (v01 HPQOEM 307E 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 000000006fbda000 000386 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000006fbfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x6fbfffff] [ 0.000000] NODE_DATA [mem 0x6f9ec000-0x6f9f0fff] [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88006d400000-ffff88006effffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x6f9f0fff] [ 0.000000] node 0: [mem 0x6fbff000-0x6fbfffff] [ 0.000000] On node 0 totalpages: 457104 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7088 pages used for memmap [ 0.000000] DMA32 zone: 453106 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x6f9f1000-0x6facefff] [ 0.000000] PM: Registered nosave memory: [mem 0x6facf000-0x6fbcefff] [ 0.000000] PM: Registered nosave memory: [mem 0x6fbcf000-0x6fbfefff] [ 0.000000] e820: [mem 0x6fc00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88006f600000 s82368 r8192 d24128 u524288 [ 0.000000] pcpu-alloc: s82368 r8192 d24128 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 449931 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-45-generic root=UUID=3ddfd631-9ba6-4e81-81fc-1aec7fa4bb9e ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 3fe000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 1763896K/1828416K available (7383K kernel code, 1145K rwdata, 3408K rodata, 1336K init, 1444K bss, 64520K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-3. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 7340032 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2194.389 MHz processor [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.77 BogoMIPS (lpj=8777556) [ 0.000007] pid_max: default: 32768 minimum: 301 [ 0.000041] Security Framework initialized [ 0.000065] AppArmor: AppArmor initialized [ 0.000066] Yama: becoming mindful. [ 0.000265] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.001136] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.001559] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.001564] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.001827] Initializing cgroup subsys memory [ 0.001836] Initializing cgroup subsys devices [ 0.001838] Initializing cgroup subsys freezer [ 0.001840] Initializing cgroup subsys blkio [ 0.001842] Initializing cgroup subsys perf_event [ 0.001845] Initializing cgroup subsys hugetlb [ 0.001867] tseg: 006fc00000 [ 0.001871] CPU: Physical Processor ID: 0 [ 0.001872] CPU: Processor Core ID: 0 [ 0.001874] mce: CPU supports 6 MCE banks [ 0.001880] LVT offset 0 assigned for vector 0xf9 [ 0.001885] process: using AMD E400 aware idle routine [ 0.001888] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.001888] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64 [ 0.001888] tlb_flushall_shift: 4 [ 0.002008] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000) [ 0.002918] ACPI: Core revision 20131115 [ 0.007539] ACPI: All ACPI Tables successfully acquired [ 0.036737] ftrace: allocating 28554 entries in 112 pages [ 0.051391] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.091110] smpboot: CPU0: AMD Athlon(tm) II P340 Dual-Core Processor (fam: 10, model: 06, stepping: 03) [ 0.196003] Performance Events: AMD PMU driver. [ 0.196009] ... version: 0 [ 0.196011] ... bit width: 48 [ 0.196012] ... generic registers: 4 [ 0.196013] ... value mask: 0000ffffffffffff [ 0.196014] ... max period: 00007fffffffffff [ 0.196016] ... fixed-purpose events: 0 [ 0.196017] ... event mask: 000000000000000f [ 0.197795] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.197885] x86: Booting SMP configuration: [ 0.197887] .... node #0, CPUs: #1 [ 0.211021] x86: Booted up 1 node, 2 CPUs [ 0.211023] smpboot: Total of 2 processors activated (8777.55 BogoMIPS) [ 0.211394] process: System has AMD C1E enabled [ 0.211414] process: Switch to broadcast mode on CPU1 [ 0.211553] process: Switch to broadcast mode on CPU0 [ 0.211651] devtmpfs: initialized [ 0.215572] EVM: security.selinux [ 0.215573] EVM: security.SMACK64 [ 0.215574] EVM: security.ima [ 0.215575] EVM: security.capability [ 0.215664] PM: Registering ACPI NVS region [mem 0x6facf000-0x6fbcefff] (1048576 bytes) [ 0.216814] pinctrl core: initialized pinctrl subsystem [ 0.216908] regulator-dummy: no parameters [ 0.216971] RTC time: 17:56:51, date: 03/24/15 [ 0.217024] NET: Registered protocol family 16 [ 0.217160] cpuidle: using governor ladder [ 0.217162] cpuidle: using governor menu [ 0.217167] node 0 link 0: io port [0, ffffff] [ 0.217170] TOM: 0000000080000000 aka 2048M [ 0.217172] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 0.217174] node 0 link 0: mmio [80000000, 8fffffff] [ 0.217177] node 0 link 0: mmio [90000000, 941fffff] [ 0.217179] node 0 link 0: mmio [94200000, 943fffff] [ 0.217181] node 0 link 0: mmio [94400000, dfffffff] [ 0.217182] node 0 link 0: mmio [e0000000, e0ffffff] ==> none [ 0.217184] node 0 link 0: mmio [e1000000, febfffff] ==> [f0000000, febfffff] [ 0.217187] node 0 link 0: mmio [fec00000, fffeffff] [ 0.217189] node 0 link 0: mmio [ffff0000, ffffffff] [ 0.217191] bus: [bus 00-1f] on node 0 link 0 [ 0.217193] bus: 00 [io 0x0000-0xffff] [ 0.217194] bus: 00 [mem 0x80000000-0xdfffffff] [ 0.217195] bus: 00 [mem 0xf0000000-0xfcffffffff] [ 0.217286] ACPI: bus type PCI registered [ 0.217289] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.217361] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.217364] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.228199] PCI: Using configuration type 1 for base access [ 0.228344] mtrr: your CPUs had inconsistent fixed MTRR settings [ 0.228345] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.228346] mtrr: probably your BIOS does not setup all CPUs. [ 0.228347] mtrr: corrected configuration. [ 0.229256] bio: create slab at 0 [ 0.229557] ACPI: Added _OSI(Module Device) [ 0.229561] ACPI: Added _OSI(Processor Device) [ 0.229563] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.229564] ACPI: Added _OSI(Processor Aggregator Device) [ 0.247592] ACPI Error: No handler for Region [ECRM] (ffff88006c67fa68) [EmbeddedControl] (20131115/evregion-162) [ 0.247600] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20131115/exfldio-299) [ 0.247604] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node ffff88006c67e460), AE_NOT_EXIST (20131115/psparse-536) [ 0.247611] ACPI Error: Method execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node ffff88006c67e460), AE_NOT_EXIST (20131115/uteval-103) [ 0.274910] ACPI: Interpreter enabled [ 0.274924] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.274929] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.274947] ACPI: (supports S0 S3 S4 S5) [ 0.274949] ACPI: Using IOAPIC for interrupt routing [ 0.275130] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.275295] ACPI: No dock devices found. [ 0.283282] ACPI: Power Resource [APPR] (off) [ 0.325154] ACPI: Power Resource [PFN0] (off) [ 0.325193] ACPI: Power Resource [PFN1] (off) [ 0.325227] ACPI: Power Resource [PFN2] (off) [ 0.325262] ACPI: Power Resource [PFN3] (off) [ 0.325296] ACPI: Power Resource [PFN4] (off) [ 0.325912] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.325918] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.325925] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.326057] acpi PNP0A03:00: host bridge window expanded to [mem 0xf0000000-0xffffffff]; [mem 0xf0000000-0xfffdffff] ignored [ 0.326062] acpi PNP0A03:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cedff]) [ 0.326252] PCI host bridge to bus 0000:00 [ 0.326255] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.326257] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.326260] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.326262] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.326264] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff] [ 0.326266] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff] [ 0.326268] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff] [ 0.326270] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.326272] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.326274] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.326276] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.326278] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.326280] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.326282] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff] [ 0.326284] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff] [ 0.326286] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff] [ 0.326288] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff] [ 0.326300] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000 [ 0.326399] pci 0000:00:01.0: [103c:9602] type 01 class 0x060400 [ 0.326518] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400 [ 0.326555] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.326594] pci 0000:00:04.0: System wakeup disabled by ACPI [ 0.326630] pci 0000:00:07.0: [1022:9607] type 01 class 0x060400 [ 0.326666] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.326702] pci 0000:00:07.0: System wakeup disabled by ACPI [ 0.326738] pci 0000:00:09.0: [1022:9608] type 01 class 0x060400 [ 0.326779] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.326817] pci 0000:00:09.0: System wakeup disabled by ACPI [ 0.326864] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.326883] pci 0000:00:11.0: reg 0x10: [io 0x6018-0x601f] [ 0.326892] pci 0000:00:11.0: reg 0x14: [io 0x6024-0x6027] [ 0.326902] pci 0000:00:11.0: reg 0x18: [io 0x6010-0x6017] [ 0.326911] pci 0000:00:11.0: reg 0x1c: [io 0x6020-0x6023] [ 0.326920] pci 0000:00:11.0: reg 0x20: [io 0x6000-0x600f] [ 0.326930] pci 0000:00:11.0: reg 0x24: [mem 0x9440b000-0x9440b3ff] [ 0.327035] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.327049] pci 0000:00:12.0: reg 0x10: [mem 0x9440a000-0x9440afff] [ 0.327144] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.327185] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.327203] pci 0000:00:12.2: reg 0x10: [mem 0x94409000-0x944090ff] [ 0.327281] pci 0000:00:12.2: supports D1 D2 [ 0.327283] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.327322] pci 0000:00:12.2: System wakeup disabled by ACPI [ 0.327361] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.327374] pci 0000:00:13.0: reg 0x10: [mem 0x94408000-0x94408fff] [ 0.327470] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.327506] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.327525] pci 0000:00:13.2: reg 0x10: [mem 0x94407000-0x944070ff] [ 0.327619] pci 0000:00:13.2: supports D1 D2 [ 0.327621] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.327662] pci 0000:00:13.2: System wakeup disabled by ACPI [ 0.327701] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.327824] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.327845] pci 0000:00:14.2: reg 0x10: [mem 0x94400000-0x94403fff 64bit] [ 0.327908] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.327944] pci 0000:00:14.2: System wakeup disabled by ACPI [ 0.327978] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.328099] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.328187] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.328200] pci 0000:00:14.5: reg 0x10: [mem 0x94406000-0x94406fff] [ 0.328314] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.328327] pci 0000:00:16.0: reg 0x10: [mem 0x94405000-0x94405fff] [ 0.328448] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.328466] pci 0000:00:16.2: reg 0x10: [mem 0x94404000-0x944040ff] [ 0.328545] pci 0000:00:16.2: supports D1 D2 [ 0.328546] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.328618] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.328677] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.328733] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.328788] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.328847] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.328990] pci 0000:01:05.0: [1002:9712] type 00 class 0x030000 [ 0.328999] pci 0000:01:05.0: reg 0x10: [mem 0x80000000-0x8fffffff pref] [ 0.329004] pci 0000:01:05.0: reg 0x14: [io 0x5000-0x50ff] [ 0.329009] pci 0000:01:05.0: reg 0x18: [mem 0x94300000-0x9430ffff] [ 0.329020] pci 0000:01:05.0: reg 0x24: [mem 0x94200000-0x942fffff] [ 0.329038] pci 0000:01:05.0: supports D1 D2 [ 0.329075] pci 0000:01:05.1: [1002:970f] type 00 class 0x040300 [ 0.329084] pci 0000:01:05.1: reg 0x10: [mem 0x94310000-0x94313fff] [ 0.329116] pci 0000:01:05.1: supports D1 D2 [ 0.329175] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.329179] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 0.329182] pci 0000:00:01.0: bridge window [mem 0x94200000-0x943fffff] [ 0.329186] pci 0000:00:01.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref] [ 0.329271] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000 [ 0.329284] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff] [ 0.329305] pci 0000:02:00.0: reg 0x18: [mem 0x90010000-0x90010fff 64bit pref] [ 0.329319] pci 0000:02:00.0: reg 0x20: [mem 0x90000000-0x9000ffff 64bit pref] [ 0.329329] pci 0000:02:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 0.329379] pci 0000:02:00.0: supports D1 D2 [ 0.329381] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.329407] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.335643] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.335652] pci 0000:00:04.0: bridge window [io 0x3000-0x4fff] [ 0.335655] pci 0000:00:04.0: bridge window [mem 0x93200000-0x941fffff] [ 0.335659] pci 0000:00:04.0: bridge window [mem 0x90000000-0x910fffff 64bit pref] [ 0.335779] acpiphp: Slot [1] registered [ 0.335813] pci 0000:00:07.0: PCI bridge to [bus 03-05] [ 0.335817] pci 0000:00:07.0: bridge window [io 0x2000-0x2fff] [ 0.335820] pci 0000:00:07.0: bridge window [mem 0x92200000-0x931fffff] [ 0.335824] pci 0000:00:07.0: bridge window [mem 0x91100000-0x920fffff 64bit pref] [ 0.335926] pci 0000:06:00.0: [14e4:4727] type 00 class 0x028000 [ 0.335947] pci 0000:06:00.0: reg 0x10: [mem 0x92100000-0x92103fff 64bit] [ 0.336041] pci 0000:06:00.0: supports D1 D2 [ 0.343664] pci 0000:00:09.0: PCI bridge to [bus 06] [ 0.343674] pci 0000:00:09.0: bridge window [mem 0x92100000-0x921fffff] [ 0.343766] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode) [ 0.343770] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] [ 0.343777] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.343779] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.343788] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.343791] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode) [ 0.343793] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode) [ 0.343795] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode) [ 0.343797] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 0.343799] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.343801] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.343803] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.343805] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 0.343807] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) [ 0.343809] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode) [ 0.343811] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode) [ 0.343813] pci 0000:00:14.4: bridge window [mem 0x80000000-0xdfffffff] (subtractive decode) [ 0.343815] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode) [ 0.359906] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.359985] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.360061] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.360136] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.360195] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.360243] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.360290] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.360337] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.360587] ACPI: Enabled 5 GPEs in block 00 to 1F [ 0.360595] ACPI: \_SB_.PCI0: notify handler is installed [ 0.360658] Found 1 acpi root devices [ 0.360706] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62 [ 0.360879] vgaarb: setting as boot device: PCI:0000:01:05.0 [ 0.360882] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.360884] vgaarb: loaded [ 0.360886] vgaarb: bridge control possible 0000:01:05.0 [ 0.361089] SCSI subsystem initialized [ 0.361172] libata version 3.00 loaded. [ 0.361194] ACPI: bus type USB registered [ 0.361216] usbcore: registered new interface driver usbfs [ 0.361224] usbcore: registered new interface driver hub [ 0.361320] usbcore: registered new device driver usb [ 0.361509] PCI: Using ACPI for IRQ routing [ 0.369380] PCI: pci_cache_line_size set to 64 bytes [ 0.369523] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.369526] e820: reserve RAM buffer [mem 0x6f9f1000-0x6fffffff] [ 0.369528] e820: reserve RAM buffer [mem 0x6fc00000-0x6fffffff] [ 0.369627] NetLabel: Initializing [ 0.369629] NetLabel: domain hash size = 128 [ 0.369630] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.369642] NetLabel: unlabeled traffic allowed by default [ 0.369749] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.369754] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.371827] Switched to clocksource hpet [ 0.377614] AppArmor: AppArmor Filesystem Enabled [ 0.377652] pnp: PnP ACPI init [ 0.377672] ACPI: bus type PNP registered [ 0.379075] pnp 00:00: [dma 4] [ 0.379121] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.379167] pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.379191] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.379299] system 00:03: [io 0x0400-0x04cf] could not be reserved [ 0.379302] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.379305] system 00:03: [io 0x04d6] has been reserved [ 0.379307] system 00:03: [io 0x0680-0x06ff] has been reserved [ 0.379309] system 00:03: [io 0x077a] has been reserved [ 0.379311] system 00:03: [io 0x0c00-0x0c01] has been reserved [ 0.379313] system 00:03: [io 0x0c14] has been reserved [ 0.379315] system 00:03: [io 0x0c50-0x0c52] has been reserved [ 0.379317] system 00:03: [io 0x0c6c] has been reserved [ 0.379320] system 00:03: [io 0x0c6f] has been reserved [ 0.379322] system 00:03: [io 0x0cd0-0x0cdb] has been reserved [ 0.379324] system 00:03: [io 0x0220-0x0227] has been reserved [ 0.379326] system 00:03: [io 0x0260-0x0273] has been reserved [ 0.379328] system 00:03: [io 0x0800] has been reserved [ 0.379331] system 00:03: [io 0x0804] has been reserved [ 0.379333] system 00:03: [io 0x087f] has been reserved [ 0.379335] system 00:03: [io 0x0cdc-0x0cdf] has been reserved [ 0.379338] system 00:03: [io 0x0b00-0x0b0f] has been reserved [ 0.379340] system 00:03: [io 0x0b20-0x0b3f] has been reserved [ 0.379344] system 00:03: [io 0x0200-0x027f] could not be reserved [ 0.379347] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.379431] system 00:04: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.379434] system 00:04: [mem 0x000ec000-0x000fffff] could not be reserved [ 0.379436] system 00:04: [mem 0x00100000-0x7fffffff] could not be reserved [ 0.379439] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved [ 0.379441] system 00:04: [mem 0xfeb00000-0xfeb00fff] has been reserved [ 0.379444] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.379446] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.379448] system 00:04: [mem 0xffe00000-0xffffffff] has been reserved [ 0.379451] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.379538] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.379626] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.379676] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.379706] pnp 00:08: Plug and Play ACPI device, IDs SYN0177 SYN0100 SYN0002 PNP0f13 (active) [ 0.392205] pnp: PnP ACPI: found 9 devices [ 0.392211] ACPI: bus type PNP unregistered [ 0.399552] pci 0000:02:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] [ 0.399588] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.399592] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 0.399595] pci 0000:00:01.0: bridge window [mem 0x94200000-0x943fffff] [ 0.399598] pci 0000:00:01.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref] [ 0.399605] pci 0000:02:00.0: BAR 6: assigned [mem 0x90020000-0x9003ffff pref] [ 0.399608] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.399610] pci 0000:00:04.0: bridge window [io 0x3000-0x4fff] [ 0.399613] pci 0000:00:04.0: bridge window [mem 0x93200000-0x941fffff] [ 0.399616] pci 0000:00:04.0: bridge window [mem 0x90000000-0x910fffff 64bit pref] [ 0.399620] pci 0000:00:07.0: PCI bridge to [bus 03-05] [ 0.399622] pci 0000:00:07.0: bridge window [io 0x2000-0x2fff] [ 0.399625] pci 0000:00:07.0: bridge window [mem 0x92200000-0x931fffff] [ 0.399628] pci 0000:00:07.0: bridge window [mem 0x91100000-0x920fffff 64bit pref] [ 0.399632] pci 0000:00:09.0: PCI bridge to [bus 06] [ 0.399635] pci 0000:00:09.0: bridge window [mem 0x92100000-0x921fffff] [ 0.399639] pci 0000:00:14.4: PCI bridge to [bus 07] [ 0.399646] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] [ 0.399658] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.399660] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.399662] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.399664] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.399666] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.399668] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.399670] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff] [ 0.399672] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff] [ 0.399674] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff] [ 0.399676] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff] [ 0.399678] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff] [ 0.399680] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff] [ 0.399682] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff] [ 0.399684] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff] [ 0.399686] pci_bus 0000:00: resource 18 [mem 0x80000000-0xdfffffff] [ 0.399688] pci_bus 0000:00: resource 19 [mem 0xf0000000-0xffffffff] [ 0.399690] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] [ 0.399692] pci_bus 0000:01: resource 1 [mem 0x94200000-0x943fffff] [ 0.399694] pci_bus 0000:01: resource 2 [mem 0x80000000-0x8fffffff 64bit pref] [ 0.399696] pci_bus 0000:02: resource 0 [io 0x3000-0x4fff] [ 0.399698] pci_bus 0000:02: resource 1 [mem 0x93200000-0x941fffff] [ 0.399701] pci_bus 0000:02: resource 2 [mem 0x90000000-0x910fffff 64bit pref] [ 0.399703] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 0.399705] pci_bus 0000:03: resource 1 [mem 0x92200000-0x931fffff] [ 0.399707] pci_bus 0000:03: resource 2 [mem 0x91100000-0x920fffff 64bit pref] [ 0.399709] pci_bus 0000:06: resource 1 [mem 0x92100000-0x921fffff] [ 0.399711] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff] [ 0.399713] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7] [ 0.399715] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff] [ 0.399717] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff] [ 0.399719] pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.399721] pci_bus 0000:07: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.399723] pci_bus 0000:07: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.399725] pci_bus 0000:07: resource 10 [mem 0x000d0000-0x000d3fff] [ 0.399727] pci_bus 0000:07: resource 11 [mem 0x000d4000-0x000d7fff] [ 0.399729] pci_bus 0000:07: resource 12 [mem 0x000d8000-0x000dbfff] [ 0.399731] pci_bus 0000:07: resource 13 [mem 0x000dc000-0x000dffff] [ 0.399733] pci_bus 0000:07: resource 14 [mem 0x000e0000-0x000e3fff] [ 0.399735] pci_bus 0000:07: resource 15 [mem 0x000e4000-0x000e7fff] [ 0.399737] pci_bus 0000:07: resource 16 [mem 0x000e8000-0x000ebfff] [ 0.399739] pci_bus 0000:07: resource 17 [mem 0x000ec000-0x000effff] [ 0.399741] pci_bus 0000:07: resource 18 [mem 0x80000000-0xdfffffff] [ 0.399743] pci_bus 0000:07: resource 19 [mem 0xf0000000-0xffffffff] [ 0.399782] NET: Registered protocol family 2 [ 0.400050] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.400133] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.400223] TCP: Hash tables configured (established 16384 bind 16384) [ 0.400278] TCP: reno registered [ 0.400284] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.400304] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.400404] NET: Registered protocol family 1 [ 0.400418] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 0.512364] PCI: CLS mismatch (64 != 32), using 64 bytes [ 0.624460] pci 0000:01:05.0: Video device with shadowed ROM [ 0.624545] Trying to unpack rootfs image as initramfs... [ 0.997498] Freeing initrd memory: 18760K (ffff880035b4c000 - ffff880036d9e000) [ 0.997962] LVT offset 1 assigned for vector 0x400 [ 0.997968] IBS: LVT offset 1 assigned [ 0.997998] perf: AMD IBS detected (0x0000001f) [ 0.998046] microcode: CPU0: patch_level=0x010000c8 [ 0.998066] microcode: CPU1: patch_level=0x010000c8 [ 0.998154] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.998156] Scanning for low memory corruption every 60 seconds [ 0.998410] Initialise system trusted keyring [ 0.998462] audit: initializing netlink socket (disabled) [ 0.998475] type=2000 audit(1427219811.860:1): initialized [ 1.031830] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.033209] zbud: loaded [ 1.033514] VFS: Disk quotas dquot_6.5.2 [ 1.033574] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.034206] fuse init (API version 7.22) [ 1.034366] msgmni has been set to 3481 [ 1.034442] Key type big_key registered [ 1.034992] Key type asymmetric registered [ 1.034994] Asymmetric key parser 'x509' registered [ 1.035029] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.035080] io scheduler noop registered [ 1.035082] io scheduler deadline registered (default) [ 1.035115] io scheduler cfq registered [ 1.035383] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X [ 1.035523] pcieport 0000:00:07.0: irq 41 for MSI/MSI-X [ 1.035657] pcieport 0000:00:09.0: irq 42 for MSI/MSI-X [ 1.035715] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.035729] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.035770] vesafb: mode is 1366x768x32, linelength=5504, pages=0 [ 1.035772] vesafb: scrolling: redraw [ 1.035774] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 1.035982] vesafb: framebuffer at 0x80000000, mapped to 0xffffc90010400000, using 4160k, total 4160k [ 1.198408] Console: switching to colour frame buffer device 170x48 [ 1.360265] fb0: VESA VGA frame buffer device [ 1.360379] ipmi message handler version 39.2 [ 1.366605] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.366729] ACPI: AC Adapter [AC] (on-line) [ 1.366967] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 1.366971] ACPI: Sleep Button [SLPB] [ 1.367006] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 1.367029] ACPI: Lid Switch [LID] [ 1.367063] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.367066] ACPI: Power Button [PWRF] [ 1.367126] ACPI: Fan [FAN0] (off) [ 1.367164] ACPI: Fan [FAN1] (off) [ 1.367223] ACPI: Fan [FAN2] (off) [ 1.367255] ACPI: Fan [FAN3] (off) [ 1.367288] ACPI: Fan [FAN4] (off) [ 1.367300] ACPI: processor limited to max C-state 1 [ 1.369503] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.369507] ACPI: Thermal Zone [CPUZ] (34 C) [ 1.386577] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.386582] ACPI: Thermal Zone [TZ3] (20 C) [ 1.386636] GHES: HEST is not enabled! [ 1.386754] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.386762] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.386771] ACPI: Battery Slot [BAT0] (battery absent) [ 1.388513] hpet_acpi_add: no address or irqs in _CRS [ 1.388531] Linux agpgart interface v0.103 [ 1.390650] brd: module loaded [ 1.391814] loop: module loaded [ 1.392231] libphy: Fixed MDIO Bus: probed [ 1.392322] tun: Universal TUN/TAP device driver, 1.6 [ 1.392323] tun: (C) 1999-2004 Max Krasnyansky [ 1.392449] PPP generic driver version 2.4.2 [ 1.392499] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.392505] ehci-pci: EHCI PCI platform driver [ 1.392697] QUIRK: Enable AMD PLL fix [ 1.392729] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.392735] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.392741] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.392752] ehci-pci 0000:00:12.2: debug port 1 [ 1.392799] ehci-pci 0000:00:12.2: irq 17, io mem 0x94409000 [ 1.404765] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.404841] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.404844] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.404846] usb usb1: Product: EHCI Host Controller [ 1.404848] usb usb1: Manufacturer: Linux 3.13.0-45-generic ehci_hcd [ 1.404850] usb usb1: SerialNumber: 0000:00:12.2 [ 1.405034] hub 1-0:1.0: USB hub found [ 1.405041] hub 1-0:1.0: 5 ports detected [ 1.405345] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.405351] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.405355] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.405366] ehci-pci 0000:00:13.2: debug port 1 [ 1.405399] ehci-pci 0000:00:13.2: irq 17, io mem 0x94407000 [ 1.416773] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.416832] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.416834] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.416836] usb usb2: Product: EHCI Host Controller [ 1.416838] usb usb2: Manufacturer: Linux 3.13.0-45-generic ehci_hcd [ 1.416840] usb usb2: SerialNumber: 0000:00:13.2 [ 1.417016] hub 2-0:1.0: USB hub found [ 1.417023] hub 2-0:1.0: 5 ports detected [ 1.417454] ehci-pci 0000:00:16.2: EHCI Host Controller [ 1.417461] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 1.417465] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.417476] ehci-pci 0000:00:16.2: debug port 1 [ 1.417510] ehci-pci 0000:00:16.2: irq 17, io mem 0x94404000 [ 1.428784] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.428848] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.428850] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.428853] usb usb3: Product: EHCI Host Controller [ 1.428854] usb usb3: Manufacturer: Linux 3.13.0-45-generic ehci_hcd [ 1.428856] usb usb3: SerialNumber: 0000:00:16.2 [ 1.429044] hub 3-0:1.0: USB hub found [ 1.429051] hub 3-0:1.0: 4 ports detected [ 1.429160] ehci-platform: EHCI generic platform driver [ 1.429172] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.429173] ohci-pci: OHCI PCI platform driver [ 1.429332] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.429337] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 1.429364] ohci-pci 0000:00:12.0: irq 18, io mem 0x9440a000 [ 1.488871] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.488875] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.488877] usb usb4: Product: OHCI PCI host controller [ 1.488879] usb usb4: Manufacturer: Linux 3.13.0-45-generic ohci_hcd [ 1.488881] usb usb4: SerialNumber: 0000:00:12.0 [ 1.489068] hub 4-0:1.0: USB hub found [ 1.489081] hub 4-0:1.0: 5 ports detected [ 1.489371] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.489376] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.489392] ohci-pci 0000:00:13.0: irq 18, io mem 0x94408000 [ 1.548919] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.548923] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.548925] usb usb5: Product: OHCI PCI host controller [ 1.548927] usb usb5: Manufacturer: Linux 3.13.0-45-generic ohci_hcd [ 1.548928] usb usb5: SerialNumber: 0000:00:13.0 [ 1.549110] hub 5-0:1.0: USB hub found [ 1.549123] hub 5-0:1.0: 5 ports detected [ 1.549506] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.549514] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 1.549529] ohci-pci 0000:00:14.5: irq 18, io mem 0x94406000 [ 1.608973] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.608978] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.608981] usb usb6: Product: OHCI PCI host controller [ 1.608983] usb usb6: Manufacturer: Linux 3.13.0-45-generic ohci_hcd [ 1.608985] usb usb6: SerialNumber: 0000:00:14.5 [ 1.609170] hub 6-0:1.0: USB hub found [ 1.609183] hub 6-0:1.0: 2 ports detected [ 1.609438] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 1.609444] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 1.609462] ohci-pci 0000:00:16.0: irq 18, io mem 0x94405000 [ 1.669002] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.669006] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.669008] usb usb7: Product: OHCI PCI host controller [ 1.669010] usb usb7: Manufacturer: Linux 3.13.0-45-generic ohci_hcd [ 1.669012] usb usb7: SerialNumber: 0000:00:16.0 [ 1.669183] hub 7-0:1.0: USB hub found [ 1.669197] hub 7-0:1.0: 4 ports detected [ 1.669299] ohci-platform: OHCI generic platform driver [ 1.669311] uhci_hcd: USB Universal Host Controller Interface driver [ 1.669378] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.671100] i8042: Detected active multiplexing controller, rev 1.1 [ 1.671781] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.671786] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.671811] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.671830] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.671846] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.672025] mousedev: PS/2 mouse device common for all mice [ 1.672215] rtc_cmos 00:05: RTC can wake from S4 [ 1.672367] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.672393] rtc_cmos 00:05: alarms up to one day, 114 bytes nvram, hpet irqs [ 1.672469] device-mapper: uevent: version 1.0.3 [ 1.672566] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 1.672574] ledtrig-cpu: registered to indicate activity on CPUs [ 1.672689] TCP: cubic registered [ 1.672783] NET: Registered protocol family 10 [ 1.673041] NET: Registered protocol family 17 [ 1.673052] Key type dns_resolver registered [ 1.673374] Loading compiled-in X.509 certificates [ 1.674627] Loaded X.509 cert 'Magrathea: Glacier signing key: 34992139f3da40b620bd5517597ba85af5797c9a' [ 1.674641] registered taskstats version 1 [ 1.677298] Key type trusted registered [ 1.679589] Key type encrypted registered [ 1.681946] AppArmor: AppArmor sha1 policy hashing enabled [ 1.681953] IMA: No TPM chip found, activating TPM-bypass! [ 1.682278] regulator-dummy: disabling [ 1.682356] Magic number: 7:479:947 [ 1.682408] tty tty4: hash matches [ 1.682447] memory memory0: hash matches [ 1.682489] rtc_cmos 00:05: setting system clock to 2015-03-24 17:56:53 UTC (1427219813) [ 1.682587] acpi-cpufreq: overriding BIOS provided _PSD data [ 1.682663] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.682664] EDD information not available. [ 1.682701] PM: Hibernation image not present or could not be loaded. [ 1.684506] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000) [ 1.684510] Write protecting the kernel read-only data: 12288k [ 1.687371] Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000) [ 1.689855] Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000) [ 1.697032] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.710611] systemd-udevd[103]: starting version 204 [ 1.732254] ahci 0000:00:11.0: version 3.0 [ 1.732549] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.732554] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.733279] scsi0 : ahci [ 1.737266] scsi1 : ahci [ 1.737530] ata1: SATA max UDMA/133 abar m1024@0x9440b000 port 0x9440b100 irq 19 [ 1.737534] ata2: SATA max UDMA/133 abar m1024@0x9440b000 port 0x9440b180 irq 19 [ 1.745083] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.745103] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.745421] r8169 0000:02:00.0: irq 43 for MSI/MSI-X [ 1.745642] r8169 0000:02:00.0 eth0: RTL8102e at 0xffffc9000035c000, 78:e3:b5:46:02:80, XID 04e00000 IRQ 43 [ 1.773359] usb 1-5: new high-speed USB device number 3 using ehci-pci [ 1.997238] tsc: Refined TSC clocksource calibration: 2194.503 MHz [ 2.088714] usb 1-5: New USB device found, idVendor=05c8, idProduct=040d [ 2.088719] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.088722] usb 1-5: Product: HP Webcam [2 MP Fixed] [ 2.088724] usb 1-5: Manufacturer: Generic [ 2.088726] usb 1-5: SerialNumber: 200901010001 [ 2.229454] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.233459] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.235411] ata1.00: ATA-8: SAMSUNG HM321HI, 2AJ10003, max UDMA/133 [ 2.235416] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.235506] ata2.00: ATAPI: hp CDDVDW TS-L633R, 0400, max UDMA/100 [ 2.240146] ata2.00: configured for UDMA/100 [ 2.241392] ata1.00: configured for UDMA/133 [ 2.241613] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM321HI 2AJ1 PQ: 0 ANSI: 5 [ 2.241901] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.241903] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.242007] sd 0:0:0:0: [sda] Write Protect is off [ 2.242011] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.242197] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.244225] scsi 1:0:0:0: CD-ROM hp CDDVDW TS-L633R 0400 PQ: 0 ANSI: 5 [ 2.251845] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.251850] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.251993] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.252104] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.297760] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 2.298301] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.365585] usb 4-1: new low-speed USB device number 2 using ohci-pci [ 2.588827] usb 4-1: New USB device found, idVendor=04f3, idProduct=00a4 [ 2.588833] usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.588836] usb 4-1: Product: 2.4G RX [ 2.595010] hidraw: raw HID events driver (C) Jiri Kosina [ 2.641036] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0xa0400, board id: 3655, fw id: 646827 [ 2.684992] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11 [ 2.685278] usbcore: registered new interface driver usbhid [ 2.685282] usbhid: USB HID core driver [ 2.688020] input: 2.4G RX as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/input/input12 [ 2.688189] hid-generic 0003:04F3:00A4.0001: input,hidraw0: USB HID v1.10 Keyboard [2.4G RX] on usb-0000:00:12.0-1/input0 [ 2.998162] Switched to clocksource tsc [ 3.109946] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 3.347759] random: nonblocking pool is initialized [ 18.029844] Adding 3905532k swap on /dev/sda5. Priority:-1 extents:1 across:3905532k FS [ 18.099126] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 18.248245] systemd-udevd[273]: starting version 204 [ 18.393280] lp: driver loaded but no devices found [ 18.404009] ppdev: user-space parallel port driver [ 18.408800] ACPI: Video Device [IGFX] (multi-head: yes rom: no post: no) [ 18.457175] acpi device:02: registered as cooling_device7 [ 18.457370] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input13 [ 18.465540] wmi: Mapper loaded [ 18.477886] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 18.481586] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08 [ 18.481611] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0) [ 18.481629] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0) [ 18.481663] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0) [ 18.514883] bcma: bus0: Bus registered [ 18.526369] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMBS.SMBO 1 (20131115/utaddress-251) [ 18.526377] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 18.551461] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 [ 18.555207] sp5100_tco: PCI Revision ID: 0x42 [ 18.555280] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address [ 18.555298] sp5100_tco: Last reboot was not triggered by watchdog. [ 18.557079] sp5100_tco: initialized (0xffffc90000362b00). heartbeat=60 sec (nowayout=0) [ 18.560755] [drm] Initialized drm 1.1.0 20060810 [ 18.562294] MCE: In-kernel MCE decoding enabled. [ 18.570740] EDAC MC: Ver: 3.0.0 [ 18.579030] AMD64 EDAC driver v3.4.0 [ 18.579164] EDAC amd64: DRAM ECC disabled. [ 18.579170] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 18.579170] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 18.579170] (Note that use of the override may cause unknown side effects.) [ 18.617094] [drm] radeon kernel modesetting enabled. [ 18.617186] checking generic (80000000 410000) vs hw (80000000 10000000) [ 18.617188] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver [ 18.617215] Console: switching to colour dummy device 80x25 [ 18.617817] [drm] initializing kernel modesetting (RS880 0x1002:0x9712 0x103C:0x1475). [ 18.617833] [drm] register mmio base: 0x94300000 [ 18.617835] [drm] register mmio size: 65536 [ 18.618640] ATOM BIOS: HP_Valima [ 18.618803] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used) [ 18.618806] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF [ 18.618811] [drm] Detected VRAM RAM=256M, BAR=256M [ 18.618814] [drm] RAM width 32bits DDR [ 18.619481] [TTM] Zone kernel: Available graphics memory: 892754 kiB [ 18.619484] [TTM] Initializing pool allocator [ 18.619493] [TTM] Initializing DMA pool allocator [ 18.619514] [drm] radeon: 256M of VRAM memory ready [ 18.619516] [drm] radeon: 512M of GTT memory ready. [ 18.619530] [drm] Loading RS780 Microcode [ 18.669224] kvm: Nested Virtualization enabled [ 18.669231] kvm: Nested Paging enabled [ 18.688649] hda-intel 0000:00:14.2: Using LPIB position fix [ 18.700138] hda-intel 0000:00:14.2: Enable sync_write for stable communication [ 18.714550] autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker [ 18.714555] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 18.714557] hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 18.714558] mono: mono_out=0x0 [ 18.714559] inputs: [ 18.714561] Internal Mic=0x11 [ 18.714563] Mic=0xa [ 18.726158] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input15 [ 18.726251] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input14 [ 18.857969] type=1400 audit(1427219830.656:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=337 comm="apparmor_parser" [ 18.857979] type=1400 audit(1427219830.656:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=337 comm="apparmor_parser" [ 18.857984] type=1400 audit(1427219830.656:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=337 comm="apparmor_parser" [ 18.858546] type=1400 audit(1427219830.656:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=337 comm="apparmor_parser" [ 18.858552] type=1400 audit(1427219830.656:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=337 comm="apparmor_parser" [ 18.858846] type=1400 audit(1427219830.656:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=337 comm="apparmor_parser" [ 19.095995] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 19.115404] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000). [ 19.115677] radeon 0000:01:05.0: WB enabled [ 19.115681] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff88005f30dc00 [ 19.115684] radeon 0000:01:05.0: fence driver on ring 3 use gpu addr 0x00000000a0000c0c and cpu addr 0xffff88005f30dc0c [ 19.115687] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 19.115688] [drm] Driver supports precise vblank timestamp query. [ 19.115690] radeon 0000:01:05.0: radeon: MSI limited to 32-bit [ 19.115709] [drm] radeon: irq initialized. [ 19.124388] Linux video capture interface: v2.00 [ 19.138837] uvcvideo: Found UVC 1.00 device HP Webcam [2 MP Fixed] (05c8:040d) [ 19.148146] [drm] ring test on 0 succeeded in 0 usecs [ 19.148156] [drm] ring test on 3 succeeded in 2 usecs [ 19.148262] [drm] Enabling audio 0 support [ 19.148281] [drm] ib test on ring 0 succeeded in 0 usecs [ 19.148296] [drm] ib test on ring 3 succeeded in 0 usecs [ 19.148667] [drm] radeon atom DIG backlight initialized [ 19.148669] [drm] Radeon Display Connectors [ 19.148671] [drm] Connector 0: [ 19.148672] [drm] VGA-1 [ 19.148674] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 19.148675] [drm] Encoders: [ 19.148676] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 19.148677] [drm] Connector 1: [ 19.148679] [drm] LVDS-1 [ 19.148680] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 19.148682] [drm] Encoders: [ 19.148683] [drm] LCD1: INTERNAL_KLDSCP_LVTMA [ 19.148684] [drm] Connector 2: [ 19.148685] [drm] HDMI-A-1 [ 19.148686] [drm] HPD1 [ 19.148688] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c [ 19.148689] [drm] Encoders: [ 19.148690] [drm] DFP1: INTERNAL_UNIPHY [ 19.148767] [drm] radeon: power management initialized [ 19.159363] input: HP Webcam [2 MP Fixed] as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input16 [ 19.160170] usbcore: registered new interface driver uvcvideo [ 19.160174] USB Video Class driver (1.1.1) [ 19.443671] cfg80211: Calling CRDA to update world regulatory domain [ 19.471432] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1 [ 19.471445] b43: probe of bcma0:0 failed with error -524 [ 19.471595] Broadcom 43xx driver loaded [ Features: PNL ] [ 19.486148] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17 [ 19.494946] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 19.495259] ieee80211 phy0: registered radio enabled led device: brcmsmac-phy0:radio gpio: 243 [ 19.603731] input: HP WMI hotkeys as /devices/virtual/input/input17 [ 19.632150] cfg80211: World regulatory domain updated: [ 19.632156] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 19.632158] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.632161] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.632162] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 19.632164] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.632165] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.632178] cfg80211: Calling CRDA for country: US [ 19.636009] cfg80211: Regulatory domain changed to country: US [ 19.636013] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 19.636016] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 19.636018] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 19.636020] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.636021] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.636023] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.636025] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 19.636026] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 19.907088] bcma-pci-bridge 0000:06:00.0: no hotplug settings from platform [ 20.139772] [drm] fb mappable at 0x80141000 [ 20.139776] [drm] vram apper at 0x80000000 [ 20.139778] [drm] size 4325376 [ 20.139779] [drm] fb depth is 24 [ 20.139780] [drm] pitch is 5632 [ 20.139897] fbcon: radeondrmfb (fb0) is primary device [ 20.188126] Console: switching to colour frame buffer device 170x48 [ 20.199300] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device [ 20.199302] radeon 0000:01:05.0: registered panic notifier [ 20.199319] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:05.0 on minor 0 [ 20.199564] hda-intel 0000:01:05.1: Using LPIB position fix [ 20.210684] hda-intel 0000:01:05.1: Enable sync_write for stable communication [ 20.215445] HDMI ATI/AMD: no speaker allocation for ELD [ 20.215522] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input18 [ 21.970115] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 22.641660] init: failsafe main process (614) killed by TERM signal [ 22.827580] bcma-pci-bridge 0000:06:00.0: no hotplug settings from platform [ 23.240111] Bluetooth: Core ver 2.17 [ 23.240141] NET: Registered protocol family 31 [ 23.240143] Bluetooth: HCI device and connection manager initialized [ 23.240506] Bluetooth: HCI socket layer initialized [ 23.240511] Bluetooth: L2CAP socket layer initialized [ 23.240516] Bluetooth: SCO socket layer initialized [ 23.246191] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 23.246197] Bluetooth: BNEP filters: protocol multicast [ 23.246209] Bluetooth: BNEP socket layer initialized [ 23.246535] Bluetooth: RFCOMM TTY layer initialized [ 23.246550] Bluetooth: RFCOMM socket layer initialized [ 23.246561] Bluetooth: RFCOMM ver 1.11 [ 23.270719] type=1400 audit(1427219835.068:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=783 comm="apparmor_parser" [ 23.270729] type=1400 audit(1427219835.068:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=783 comm="apparmor_parser" [ 23.271290] type=1400 audit(1427219835.068:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=783 comm="apparmor_parser" [ 23.372070] type=1400 audit(1427219835.168:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=798 comm="apparmor_parser" [ 23.443684] init: cups main process (784) killed by HUP signal [ 23.443697] init: cups main process ended, respawning [ 25.225297] r8169 0000:02:00.0 eth0: link down [ 25.225346] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 25.225696] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 25.432077] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 25.432089] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement) [ 25.432241] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 25.432533] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 25.556395] init: samba-ad-dc main process (857) terminated with status 1 [ 25.882649] audit_printk_skb: 168 callbacks suppressed [ 25.882654] type=1400 audit(1427219837.676:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1099 comm="apparmor_parser" [ 25.911673] init: gdm main process (959) killed by TERM signal [ 26.769739] wlan0: authenticate with 72:ab:25:eb:ba:39 [ 26.771783] wlan0: send auth to 72:ab:25:eb:ba:39 (try 1/3) [ 26.773325] wlan0: authenticated [ 26.773526] brcmsmac bcma0:0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 26.777403] wlan0: associate with 72:ab:25:eb:ba:39 (try 1/3) [ 26.779676] wlan0: RX AssocResp from 72:ab:25:eb:ba:39 (capab=0x411 status=0 aid=4) [ 26.780232] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated [ 26.780236] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 26.780247] wlan0: associated [ 26.780258] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 26.781188] wlan0: deauthenticating from 72:ab:25:eb:ba:39 by local choice (reason=2) [ 26.782229] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: disassociated [ 26.782238] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 26.782771] wlan0: authenticate with 72:ab:25:eb:ba:39 [ 26.782860] wlan0: send auth to 72:ab:25:eb:ba:39 (try 1/3) [ 26.783207] cfg80211: Calling CRDA to update world regulatory domain [ 26.784511] wlan0: authenticated [ 26.784724] brcmsmac bcma0:0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 26.785837] wlan0: associate with 72:ab:25:eb:ba:39 (try 1/3) [ 26.787042] cfg80211: World regulatory domain updated: [ 26.787047] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 26.787049] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.787052] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.787053] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 26.787055] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.787057] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.788124] wlan0: RX AssocResp from 72:ab:25:eb:ba:39 (capab=0x411 status=0 aid=4) [ 26.788651] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated [ 26.788655] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 26.788663] wlan0: associated [ 30.681042] init: plymouth-upstart-bridge main process ended, respawning [ 30.691191] init: plymouth-upstart-bridge main process (1242) terminated with status 1 [ 30.691211] init: plymouth-upstart-bridge main process ended, respawning [ 35.541935] bcma-pci-bridge 0000:06:00.0: no hotplug settings from platform [ 36.798651] wlan0: deauthenticating from 72:ab:25:eb:ba:39 by local choice (reason=3) [ 36.799685] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: disassociated [ 36.799697] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 36.800855] cfg80211: Calling CRDA to update world regulatory domain [ 36.804331] cfg80211: World regulatory domain updated: [ 36.804337] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 36.804340] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 36.804342] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 36.804344] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 36.804345] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 36.804347] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 37.730849] wlan0: authenticate with 72:ab:25:eb:ba:39 [ 37.732155] wlan0: send auth to 72:ab:25:eb:ba:39 (try 1/3) [ 37.733965] wlan0: authenticated [ 37.734122] brcmsmac bcma0:0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 37.734328] wlan0: associate with 72:ab:25:eb:ba:39 (try 1/3) [ 37.736829] wlan0: RX AssocResp from 72:ab:25:eb:ba:39 (capab=0x411 status=0 aid=4) [ 37.737375] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated [ 37.737379] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 37.737390] wlan0: associated [ 37.796941] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement) [ 53.381150] type=1400 audit(1427219865.704:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1800 comm="apparmor_parser" [ 53.381164] type=1400 audit(1427219865.704:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1800 comm="apparmor_parser" [ 53.381733] type=1400 audit(1427219865.704:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1800 comm="apparmor_parser" [ 1295.666761] systemd-hostnamed[2909]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 1966.980159] systemd-hostnamed[4435]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 4000.701106] webapp-containe[9730]: segfault at 0 ip (null) sp 00007fffd7ac8b88 error 14 [ 4377.357850] systemd-hostnamed[11283]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 4845.406375] webapp-containe[10015]: segfault at 0 ip (null) sp 00007fff4b7ef8d8 error 14 [ 6322.944993] webapp-containe[13319]: segfault at 0 ip (null) sp 00007fff531b3668 error 14 [ 6545.144028] webapp-containe[14622]: segfault at 0 ip (null) sp 00007fff5ee74ca8 error 14 [15232.798944] usb 2-2: new high-speed USB device number 2 using ehci-pci [15232.932900] usb 2-2: New USB device found, idVendor=058f, idProduct=6366 [15232.932914] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [15232.932921] usb 2-2: Product: Mass Storage Device [15232.932927] usb 2-2: Manufacturer: Generic [15232.932932] usb 2-2: SerialNumber: 058F63666433 [15234.748729] usb-storage 2-2:1.0: USB Mass Storage device detected [15234.750798] scsi2 : usb-storage 2-2:1.0 [15234.751204] usbcore: registered new interface driver usb-storage [15234.932446] keucr: module is from the staging directory, the quality is unknown, you have been warned. [15234.933171] usbcore: registered new interface driver eucr [15235.878690] scsi 2:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0 [15235.881600] sd 2:0:0:0: Attached scsi generic sg2 type 0 [15266.478378] usb 2-2: reset high-speed USB device number 2 using ehci-pci [15276.730630] usb 2-2: reset high-speed USB device number 2 using ehci-pci [15292.987928] usb 2-2: reset high-speed USB device number 2 using ehci-pci [15293.236127] usb 2-2: reset high-speed USB device number 2 using ehci-pci [15303.488396] usb 2-2: reset high-speed USB device number 2 using ehci-pci [15303.621201] sd 2:0:0:0: Device offlined - not ready after error recovery [15303.621381] sd 2:0:0:0: rejecting I/O to offline device [15303.621398] sd 2:0:0:0: rejecting I/O to offline device [15303.621404] sd 2:0:0:0: rejecting I/O to offline device [15303.621408] sd 2:0:0:0: [sdb] READ CAPACITY failed [15303.621411] sd 2:0:0:0: [sdb] [15303.621414] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [15303.621416] sd 2:0:0:0: [sdb] Sense not available. [15303.621421] sd 2:0:0:0: rejecting I/O to offline device [15303.621426] sd 2:0:0:0: [sdb] Write Protect is off [15303.621429] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00 [15303.621433] sd 2:0:0:0: rejecting I/O to offline device [15303.621437] sd 2:0:0:0: [sdb] Asking for cache data failed [15303.621439] sd 2:0:0:0: [sdb] Assuming drive cache: write through [15303.622357] sd 2:0:0:0: [sdb] Attached SCSI removable disk [15637.488060] systemd-hostnamed[18866]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [15654.682563] usb 2-2: USB disconnect, device number 2 [15674.145698] usb 2-2: new high-speed USB device number 3 using ehci-pci [15674.279424] usb 2-2: New USB device found, idVendor=058f, idProduct=6366 [15674.279438] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [15674.279445] usb 2-2: Product: Mass Storage Device [15674.279451] usb 2-2: Manufacturer: Generic [15674.279456] usb 2-2: SerialNumber: 058F63666433 [15674.280834] usb-storage 2-2:1.0: USB Mass Storage device detected [15674.281167] scsi3 : usb-storage 2-2:1.0 [15675.407644] scsi 3:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0 [15675.408380] sd 3:0:0:0: Attached scsi generic sg2 type 0 [15676.101486] sd 3:0:0:0: [sdb] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB) [15676.102721] sd 3:0:0:0: [sdb] Write Protect is off [15676.102735] sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00 [15676.103769] sd 3:0:0:0: [sdb] No Caching mode page found [15676.103785] sd 3:0:0:0: [sdb] Assuming drive cache: write through [15676.112094] sd 3:0:0:0: [sdb] No Caching mode page found [15676.112108] sd 3:0:0:0: [sdb] Assuming drive cache: write through [15676.137814] sdb: sdb1 [15676.143141] sd 3:0:0:0: [sdb] No Caching mode page found [15676.143156] sd 3:0:0:0: [sdb] Assuming drive cache: write through [15676.143166] sd 3:0:0:0: [sdb] Attached SCSI removable disk [24433.239407] perf samples too long (2521 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [27620.558184] wlan0: deauthenticating from 72:ab:25:eb:ba:39 by local choice (reason=3) [27620.559443] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: disassociated [27620.559462] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement) [27620.559470] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement) [27620.560399] cfg80211: Calling CRDA to update world regulatory domain [27621.854761] cfg80211: World regulatory domain updated: [27621.854772] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [27621.854779] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [27621.854785] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [27621.854790] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [27621.854794] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [27621.854799] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [27628.542135] PM: Syncing filesystems ... done. [27628.856060] PM: Preparing system for mem sleep [27629.043347] Freezing user space processes ... (elapsed 0.099 seconds) done. [27629.142955] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [27629.144245] PM: Entering mem sleep [27629.144320] Suspending console(s) (use no_console_suspend to debug) [27629.144648] sd 0:0:0:0: [sda] Synchronizing SCSI cache [27629.144732] sd 0:0:0:0: [sda] Stopping disk [27630.551706] [drm] Disabling audio 0 support [27630.606219] PM: suspend of devices complete after 1460.548 msecs [27630.606434] PM: late suspend of devices complete after 0.211 msecs [27630.622361] r8169 0000:02:00.0: System wakeup enabled by ACPI [27630.638342] pci0000:00: System wakeup enabled by ACPI [27630.654384] ehci-pci 0000:00:13.2: System wakeup enabled by ACPI [27630.670278] ohci-pci 0000:00:13.0: System wakeup enabled by ACPI [27630.670310] ehci-pci 0000:00:12.2: System wakeup enabled by ACPI [27630.686320] ohci-pci 0000:00:12.0: System wakeup enabled by ACPI [27630.686425] PM: noirq suspend of devices complete after 79.922 msecs [27630.686474] ACPI: Preparing to enter system sleep state S3 [27630.704161] PM: Saving platform NVS memory [27630.705368] Disabling non-boot CPUs ... [27630.718887] Broke affinity for irq 17 [27630.719901] kvm: disabling virtualization on CPU1 [27630.822328] smpboot: CPU 1 is now offline [27630.822937] ACPI: Low-level resume complete [27630.822970] PM: Restoring platform NVS memory [27630.823686] LVT offset 1 assigned for vector 0x400 [27630.823695] IBS: LVT offset 1 assigned [27630.823797] Enabling non-boot CPUs ... [27630.823838] x86: Booting SMP configuration: [27630.823839] smpboot: Booting Node 0 Processor 1 APIC 0x1 [27630.834808] kvm: enabling virtualization on CPU1 [27630.836999] process: Switch to broadcast mode on CPU1 [27630.837175] CPU1 is up [27630.837701] ACPI: Waking up from system sleep state S3 [27630.872648] acpi LNXPOWER:05: Turning ON [27630.875968] ohci-pci 0000:00:12.0: System wakeup disabled by ACPI [27630.891473] ehci-pci 0000:00:12.2: System wakeup disabled by ACPI [27630.891530] ohci-pci 0000:00:13.0: System wakeup disabled by ACPI [27630.907537] ehci-pci 0000:00:13.2: System wakeup disabled by ACPI [27630.943562] pci0000:00: System wakeup disabled by ACPI [27631.007702] PM: noirq resume of devices complete after 131.810 msecs [27631.007850] PM: early resume of devices complete after 0.125 msecs [27631.008232] r8169 0000:02:00.0: System wakeup disabled by ACPI [27631.019118] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000). [27631.019168] radeon 0000:01:05.0: WB enabled [27631.019171] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff88005f30dc00 [27631.019173] radeon 0000:01:05.0: fence driver on ring 3 use gpu addr 0x00000000a0000c0c and cpu addr 0xffff88005f30dc0c [27631.051287] [drm] ring test on 0 succeeded in 1 usecs [27631.051294] [drm] ring test on 3 succeeded in 2 usecs [27631.051296] [drm] Enabling audio 0 support [27631.051322] [drm] ib test on ring 0 succeeded in 0 usecs [27631.051337] [drm] ib test on ring 3 succeeded in 0 usecs [27631.051362] HDMI ATI/AMD: no speaker allocation for ELD [27631.235751] usb 1-5: reset high-speed USB device number 3 using ehci-pci [27631.347818] HDMI ATI/AMD: no speaker allocation for ELD [27631.483936] usb 2-2: reset high-speed USB device number 3 using ehci-pci [27631.527945] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [27631.546390] ata2.00: configured for UDMA/100 [27631.648060] HDMI ATI/AMD: no speaker allocation for ELD [27631.948327] HDMI ATI/AMD: no speaker allocation for ELD [27632.248554] HDMI ATI/AMD: no speaker allocation for ELD [27632.548788] HDMI ATI/AMD: no speaker allocation for ELD [27632.849035] HDMI ATI/AMD: no speaker allocation for ELD [27633.149280] HDMI ATI/AMD: no speaker allocation for ELD [27633.449520] HDMI ATI/AMD: no speaker allocation for ELD [27634.162104] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [27634.174067] ata1.00: configured for UDMA/133 [27634.190169] sd 0:0:0:0: [sda] Starting disk [27636.436447] PM: resume of devices complete after 5424.179 msecs [27636.436791] radeon 0000:01:05.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [27636.436797] pci 0000:00:14.4: PCI bridge to [bus 07] [27636.436801] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] [27636.436820] pci 0000:00:00.0: no hotplug settings from platform [27636.436822] pci 0000:00:00.0: using default PCI settings [27636.436828] pci 0000:00:01.0: no hotplug settings from platform [27636.436829] pci 0000:00:01.0: using default PCI settings [27636.436837] radeon 0000:01:05.0: no hotplug settings from platform [27636.436838] radeon 0000:01:05.0: using default PCI settings [27636.436845] snd_hda_intel 0000:01:05.1: no hotplug settings from platform [27636.436846] snd_hda_intel 0000:01:05.1: using default PCI settings [27636.436851] pcieport 0000:00:04.0: no hotplug settings from platform [27636.436877] r8169 0000:02:00.0: no hotplug settings from platform [27636.436880] pcieport 0000:00:07.0: no hotplug settings from platform [27636.436883] pcieport 0000:00:09.0: no hotplug settings from platform [27636.436894] bcma-pci-bridge 0000:06:00.0: no hotplug settings from platform [27636.436898] ahci 0000:00:11.0: no hotplug settings from platform [27636.436900] ahci 0000:00:11.0: using default PCI settings [27636.436907] ohci-pci 0000:00:12.0: no hotplug settings from platform [27636.436909] ohci-pci 0000:00:12.0: using default PCI settings [27636.436916] ehci-pci 0000:00:12.2: no hotplug settings from platform [27636.436918] ehci-pci 0000:00:12.2: using default PCI settings [27636.436925] ohci-pci 0000:00:13.0: no hotplug settings from platform [27636.436927] ohci-pci 0000:00:13.0: using default PCI settings [27636.436934] ehci-pci 0000:00:13.2: no hotplug settings from platform [27636.436936] ehci-pci 0000:00:13.2: using default PCI settings [27636.436943] pci 0000:00:14.0: no hotplug settings from platform [27636.436945] pci 0000:00:14.0: using default PCI settings [27636.436952] snd_hda_intel 0000:00:14.2: no hotplug settings from platform [27636.436954] snd_hda_intel 0000:00:14.2: using default PCI settings [27636.436961] pci 0000:00:14.3: no hotplug settings from platform [27636.436963] pci 0000:00:14.3: using default PCI settings [27636.436970] pci 0000:00:14.4: no hotplug settings from platform [27636.436971] pci 0000:00:14.4: using default PCI settings [27636.436982] ohci-pci 0000:00:14.5: no hotplug settings from platform [27636.436984] ohci-pci 0000:00:14.5: using default PCI settings [27636.436991] ohci-pci 0000:00:16.0: no hotplug settings from platform [27636.436993] ohci-pci 0000:00:16.0: using default PCI settings [27636.437000] ehci-pci 0000:00:16.2: no hotplug settings from platform [27636.437002] ehci-pci 0000:00:16.2: using default PCI settings [27636.437009] pci 0000:00:18.0: no hotplug settings from platform [27636.437010] pci 0000:00:18.0: using default PCI settings [27636.437014] pci 0000:00:18.1: no hotplug settings from platform [27636.437016] pci 0000:00:18.1: using default PCI settings [27636.437020] pci 0000:00:18.2: no hotplug settings from platform [27636.437022] pci 0000:00:18.2: using default PCI settings [27636.437026] k10temp 0000:00:18.3: no hotplug settings from platform [27636.437027] k10temp 0000:00:18.3: using default PCI settings [27636.437031] pci 0000:00:18.4: no hotplug settings from platform [27636.437033] pci 0000:00:18.4: using default PCI settings [27636.437105] radeon 0000:01:05.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [27636.437107] pci 0000:00:14.4: PCI bridge to [bus 07] [27636.437110] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] [27636.437125] pci 0000:00:00.0: no hotplug settings from platform [27636.437126] pci 0000:00:00.0: using default PCI settings [27636.437131] pci 0000:00:01.0: no hotplug settings from platform [27636.437132] pci 0000:00:01.0: using default PCI settings [27636.437139] radeon 0000:01:05.0: no hotplug settings from platform [27636.437141] radeon 0000:01:05.0: using default PCI settings [27636.437146] snd_hda_intel 0000:01:05.1: no hotplug settings from platform [27636.437148] snd_hda_intel 0000:01:05.1: using default PCI settings [27636.437153] pcieport 0000:00:04.0: no hotplug settings from platform [27636.437178] r8169 0000:02:00.0: no hotplug settings from platform [27636.437181] pcieport 0000:00:07.0: no hotplug settings from platform [27636.437184] pcieport 0000:00:09.0: no hotplug settings from platform [27636.437191] bcma-pci-bridge 0000:06:00.0: no hotplug settings from platform [27636.437195] ahci 0000:00:11.0: no hotplug settings from platform [27636.437196] ahci 0000:00:11.0: using default PCI settings [27636.437204] ohci-pci 0000:00:12.0: no hotplug settings from platform [27636.437205] ohci-pci 0000:00:12.0: using default PCI settings [27636.437212] ehci-pci 0000:00:12.2: no hotplug settings from platform [27636.437214] ehci-pci 0000:00:12.2: using default PCI settings [27636.437221] ohci-pci 0000:00:13.0: no hotplug settings from platform [27636.437223] ohci-pci 0000:00:13.0: using default PCI settings [27636.437230] ehci-pci 0000:00:13.2: no hotplug settings from platform [27636.437231] ehci-pci 0000:00:13.2: using default PCI settings [27636.437239] pci 0000:00:14.0: no hotplug settings from platform [27636.437240] pci 0000:00:14.0: using default PCI settings [27636.437247] snd_hda_intel 0000:00:14.2: no hotplug settings from platform [27636.437249] snd_hda_intel 0000:00:14.2: using default PCI settings [27636.437256] pci 0000:00:14.3: no hotplug settings from platform [27636.437258] pci 0000:00:14.3: using default PCI settings [27636.437265] pci 0000:00:14.4: no hotplug settings from platform [27636.437267] pci 0000:00:14.4: using default PCI settings [27636.437277] ohci-pci 0000:00:14.5: no hotplug settings from platform [27636.437278] ohci-pci 0000:00:14.5: using default PCI settings [27636.437285] ohci-pci 0000:00:16.0: no hotplug settings from platform [27636.437287] ohci-pci 0000:00:16.0: using default PCI settings [27636.437294] ehci-pci 0000:00:16.2: no hotplug settings from platform [27636.437296] ehci-pci 0000:00:16.2: using default PCI settings [27636.437303] pci 0000:00:18.0: no hotplug settings from platform [27636.437304] pci 0000:00:18.0: using default PCI settings [27636.437308] pci 0000:00:18.1: no hotplug settings from platform [27636.437310] pci 0000:00:18.1: using default PCI settings [27636.437314] pci 0000:00:18.2: no hotplug settings from platform [27636.437315] pci 0000:00:18.2: using default PCI settings [27636.437319] k10temp 0000:00:18.3: no hotplug settings from platform [27636.437321] k10temp 0000:00:18.3: using default PCI settings [27636.437324] pci 0000:00:18.4: no hotplug settings from platform [27636.437326] pci 0000:00:18.4: using default PCI settings [27636.437354] radeon 0000:01:05.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [27636.437357] pci 0000:00:14.4: PCI bridge to [bus 07] [27636.437360] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] [27636.437374] pci 0000:00:00.0: no hotplug settings from platform [27636.437375] pci 0000:00:00.0: using default PCI settings [27636.437380] pci 0000:00:01.0: no hotplug settings from platform [27636.437381] pci 0000:00:01.0: using default PCI settings [27636.437388] radeon 0000:01:05.0: no hotplug settings from platform [27636.437390] radeon 0000:01:05.0: using default PCI settings [27636.437395] snd_hda_intel 0000:01:05.1: no hotplug settings from platform [27636.437397] snd_hda_intel 0000:01:05.1: using default PCI settings [27636.437401] pcieport 0000:00:04.0: no hotplug settings from platform [27636.437427] r8169 0000:02:00.0: no hotplug settings from platform [27636.437430] pcieport 0000:00:07.0: no hotplug settings from platform [27636.437434] pcieport 0000:00:09.0: no hotplug settings from platform [27636.437441] bcma-pci-bridge 0000:06:00.0: no hotplug settings from platform [27636.437444] ahci 0000:00:11.0: no hotplug settings from platform [27636.437446] ahci 0000:00:11.0: using default PCI settings [27636.437453] ohci-pci 0000:00:12.0: no hotplug settings from platform [27636.437455] ohci-pci 0000:00:12.0: using default PCI settings [27636.437462] ehci-pci 0000:00:12.2: no hotplug settings from platform [27636.437463] ehci-pci 0000:00:12.2: using default PCI settings [27636.437470] ohci-pci 0000:00:13.0: no hotplug settings from platform [27636.437472] ohci-pci 0000:00:13.0: using default PCI settings [27636.437479] ehci-pci 0000:00:13.2: no hotplug settings from platform [27636.437481] ehci-pci 0000:00:13.2: using default PCI settings [27636.437488] pci 0000:00:14.0: no hotplug settings from platform [27636.437490] pci 0000:00:14.0: using default PCI settings [27636.437497] snd_hda_intel 0000:00:14.2: no hotplug settings from platform [27636.437498] snd_hda_intel 0000:00:14.2: using default PCI settings [27636.437505] pci 0000:00:14.3: no hotplug settings from platform [27636.437507] pci 0000:00:14.3: using default PCI settings [27636.437514] pci 0000:00:14.4: no hotplug settings from platform [27636.437516] pci 0000:00:14.4: using default PCI settings [27636.437526] ohci-pci 0000:00:14.5: no hotplug settings from platform [27636.437527] ohci-pci 0000:00:14.5: using default PCI settings [27636.437535] ohci-pci 0000:00:16.0: no hotplug settings from platform [27636.437536] ohci-pci 0000:00:16.0: using default PCI settings [27636.437544] ehci-pci 0000:00:16.2: no hotplug settings from platform [27636.437545] ehci-pci 0000:00:16.2: using default PCI settings [27636.437552] pci 0000:00:18.0: no hotplug settings from platform [27636.437554] pci 0000:00:18.0: using default PCI settings [27636.437558] pci 0000:00:18.1: no hotplug settings from platform [27636.437559] pci 0000:00:18.1: using default PCI settings [27636.437563] pci 0000:00:18.2: no hotplug settings from platform [27636.437565] pci 0000:00:18.2: using default PCI settings [27636.437568] k10temp 0000:00:18.3: no hotplug settings from platform [27636.437570] k10temp 0000:00:18.3: using default PCI settings [27636.437574] pci 0000:00:18.4: no hotplug settings from platform [27636.437576] pci 0000:00:18.4: using default PCI settings [27636.437877] ACPI: Error installing CMOS-RTC region handler [27636.438058] hpet_acpi_add: no address or irqs in _CRS [27636.438206] pci_bus 0000:07: Allocating resources [27636.438216] radeon 0000:01:05.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [27636.438219] pci 0000:00:14.4: PCI bridge to [bus 07] [27636.438222] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] [27636.438236] pci 0000:00:00.0: no hotplug settings from platform [27636.438238] pci 0000:00:00.0: using default PCI settings [27636.438243] pci 0000:00:01.0: no hotplug settings from platform [27636.438244] pci 0000:00:01.0: using default PCI settings [27636.438251] radeon 0000:01:05.0: no hotplug settings from platform [27636.438253] radeon 0000:01:05.0: using default PCI settings [27636.438258] snd_hda_intel 0000:01:05.1: no hotplug settings from platform [27636.438260] snd_hda_intel 0000:01:05.1: using default PCI settings [27636.438265] pcieport 0000:00:04.0: no hotplug settings from platform [27636.438290] r8169 0000:02:00.0: no hotplug settings from platform [27636.438294] pcieport 0000:00:07.0: no hotplug settings from platform [27636.438297] pcieport 0000:00:09.0: no hotplug settings from platform [27636.438304] bcma-pci-bridge 0000:06:00.0: no hotplug settings from platform [27636.438307] ahci 0000:00:11.0: no hotplug settings from platform [27636.438309] ahci 0000:00:11.0: using default PCI settings [27636.438316] ohci-pci 0000:00:12.0: no hotplug settings from platform [27636.438318] ohci-pci 0000:00:12.0: using default PCI settings [27636.438325] ehci-pci 0000:00:12.2: no hotplug settings from platform [27636.438327] ehci-pci 0000:00:12.2: using default PCI settings [27636.438334] ohci-pci 0000:00:13.0: no hotplug settings from platform [27636.438336] ohci-pci 0000:00:13.0: using default PCI settings [27636.438343] ehci-pci 0000:00:13.2: no hotplug settings from platform [27636.438344] ehci-pci 0000:00:13.2: using default PCI settings [27636.438351] pci 0000:00:14.0: no hotplug settings from platform [27636.438353] pci 0000:00:14.0: using default PCI settings [27636.438360] snd_hda_intel 0000:00:14.2: no hotplug settings from platform [27636.438362] snd_hda_intel 0000:00:14.2: using default PCI settings [27636.438369] pci 0000:00:14.3: no hotplug settings from platform [27636.438371] pci 0000:00:14.3: using default PCI settings [27636.438378] pci 0000:00:14.4: no hotplug settings from platform [27636.438379] pci 0000:00:14.4: using default PCI settings [27636.438389] ohci-pci 0000:00:14.5: no hotplug settings from platform [27636.438391] ohci-pci 0000:00:14.5: using default PCI settings [27636.438398] ohci-pci 0000:00:16.0: no hotplug settings from platform [27636.438400] ohci-pci 0000:00:16.0: using default PCI settings [27636.438407] ehci-pci 0000:00:16.2: no hotplug settings from platform [27636.438409] ehci-pci 0000:00:16.2: using default PCI settings [27636.438416] pci 0000:00:18.0: no hotplug settings from platform [27636.438418] pci 0000:00:18.0: using default PCI settings [27636.438421] pci 0000:00:18.1: no hotplug settings from platform [27636.438423] pci 0000:00:18.1: using default PCI settings [27636.438427] pci 0000:00:18.2: no hotplug settings from platform [27636.438428] pci 0000:00:18.2: using default PCI settings [27636.438432] k10temp 0000:00:18.3: no hotplug settings from platform [27636.438434] k10temp 0000:00:18.3: using default PCI settings [27636.438438] pci 0000:00:18.4: no hotplug settings from platform [27636.438440] pci 0000:00:18.4: using default PCI settings [27636.438483] radeon 0000:01:05.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [27636.438486] pci 0000:00:14.4: PCI bridge to [bus 07] [27636.438489] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] [27636.438503] pci 0000:00:00.0: no hotplug settings from platform [27636.438505] pci 0000:00:00.0: using default PCI settings [27636.438509] pci 0000:00:01.0: no hotplug settings from platform [27636.438511] pci 0000:00:01.0: using default PCI settings [27636.438517] radeon 0000:01:05.0: no hotplug settings from platform [27636.438519] radeon 0000:01:05.0: using default PCI settings [27636.438525] snd_hda_intel 0000:01:05.1: no hotplug settings from platform [27636.438526] snd_hda_intel 0000:01:05.1: using default PCI settings [27636.438531] pcieport 0000:00:04.0: no hotplug settings from platform [27636.438553] r8169 0000:02:00.0: no hotplug settings from platform [27636.438556] pcieport 0000:00:07.0: no hotplug settings from platform [27636.438560] pcieport 0000:00:09.0: no hotplug settings from platform [27636.438567] bcma-pci-bridge 0000:06:00.0: no hotplug settings from platform [27636.438570] ahci 0000:00:11.0: no hotplug settings from platform [27636.438572] ahci 0000:00:11.0: using default PCI settings [27636.438579] ohci-pci 0000:00:12.0: no hotplug settings from platform [27636.438581] ohci-pci 0000:00:12.0: using default PCI settings [27636.438588] ehci-pci 0000:00:12.2: no hotplug settings from platform [27636.438590] ehci-pci 0000:00:12.2: using default PCI settings [27636.438597] ohci-pci 0000:00:13.0: no hotplug settings from platform [27636.438598] ohci-pci 0000:00:13.0: using default PCI settings [27636.438605] ehci-pci 0000:00:13.2: no hotplug settings from platform [27636.438607] ehci-pci 0000:00:13.2: using default PCI settings [27636.438615] pci 0000:00:14.0: no hotplug settings from platform [27636.438616] pci 0000:00:14.0: using default PCI settings [27636.438623] snd_hda_intel 0000:00:14.2: no hotplug settings from platform [27636.438625] snd_hda_intel 0000:00:14.2: using default PCI settings [27636.438632] pci 0000:00:14.3: no hotplug settings from platform [27636.438634] pci 0000:00:14.3: using default PCI settings [27636.438641] pci 0000:00:14.4: no hotplug settings from platform [27636.438642] pci 0000:00:14.4: using default PCI settings [27636.438653] ohci-pci 0000:00:14.5: no hotplug settings from platform [27636.438654] ohci-pci 0000:00:14.5: using default PCI settings [27636.438661] ohci-pci 0000:00:16.0: no hotplug settings from platform [27636.438663] ohci-pci 0000:00:16.0: using default PCI settings [27636.438670] ehci-pci 0000:00:16.2: no hotplug settings from platform [27636.438672] ehci-pci 0000:00:16.2: using default PCI settings [27636.438679] pci 0000:00:18.0: no hotplug settings from platform [27636.438681] pci 0000:00:18.0: using default PCI settings [27636.438684] pci 0000:00:18.1: no hotplug settings from platform [27636.438686] pci 0000:00:18.1: using default PCI settings [27636.438690] pci 0000:00:18.2: no hotplug settings from platform [27636.438691] pci 0000:00:18.2: using default PCI settings [27636.438695] k10temp 0000:00:18.3: no hotplug settings from platform [27636.438697] k10temp 0000:00:18.3: using default PCI settings [27636.438701] pci 0000:00:18.4: no hotplug settings from platform [27636.438702] pci 0000:00:18.4: using default PCI settings [27636.438765] radeon 0000:01:05.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [27636.438767] pci 0000:00:14.4: PCI bridge to [bus 07] [27636.438770] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] [27636.438784] pci 0000:00:00.0: no hotplug settings from platform [27636.438786] pci 0000:00:00.0: using default PCI settings [27636.438790] pci 0000:00:01.0: no hotplug settings from platform [27636.438792] pci 0000:00:01.0: using default PCI settings [27636.438798] radeon 0000:01:05.0: no hotplug settings from platform [27636.438800] radeon 0000:01:05.0: using default PCI settings [27636.438806] snd_hda_intel 0000:01:05.1: no hotplug settings from platform [27636.438807] snd_hda_intel 0000:01:05.1: using default PCI settings [27636.438812] pcieport 0000:00:04.0: no hotplug settings from platform [27636.438834] r8169 0000:02:00.0: no hotplug settings from platform [27636.438838] pcieport 0000:00:07.0: no hotplug settings from platform [27636.438841] pcieport 0000:00:09.0: no hotplug settings from platform [27636.438847] bcma-pci-bridge 0000:06:00.0: no hotplug settings from platform [27636.438850] ahci 0000:00:11.0: no hotplug settings from platform [27636.438852] ahci 0000:00:11.0: using default PCI settings [27636.438859] ohci-pci 0000:00:12.0: no hotplug settings from platform [27636.438861] ohci-pci 0000:00:12.0: using default PCI settings [27636.438868] ehci-pci 0000:00:12.2: no hotplug settings from platform [27636.438870] ehci-pci 0000:00:12.2: using default PCI settings [27636.438877] ohci-pci 0000:00:13.0: no hotplug settings from platform [27636.438878] ohci-pci 0000:00:13.0: using default PCI settings [27636.438886] ehci-pci 0000:00:13.2: no hotplug settings from platform [27636.438887] ehci-pci 0000:00:13.2: using default PCI settings [27636.438894] pci 0000:00:14.0: no hotplug settings from platform [27636.438896] pci 0000:00:14.0: using default PCI settings [27636.438903] snd_hda_intel 0000:00:14.2: no hotplug settings from platform [27636.438905] snd_hda_intel 0000:00:14.2: using default PCI settings [27636.438912] pci 0000:00:14.3: no hotplug settings from platform [27636.438914] pci 0000:00:14.3: using default PCI settings [27636.438921] pci 0000:00:14.4: no hotplug settings from platform [27636.438922] pci 0000:00:14.4: using default PCI settings [27636.438932] ohci-pci 0000:00:14.5: no hotplug settings from platform [27636.438934] ohci-pci 0000:00:14.5: using default PCI settings [27636.438941] ohci-pci 0000:00:16.0: no hotplug settings from platform [27636.438943] ohci-pci 0000:00:16.0: using default PCI settings [27636.438950] ehci-pci 0000:00:16.2: no hotplug settings from platform [27636.438952] ehci-pci 0000:00:16.2: using default PCI settings [27636.438959] pci 0000:00:18.0: no hotplug settings from platform [27636.438960] pci 0000:00:18.0: using default PCI settings [27636.438964] pci 0000:00:18.1: no hotplug settings from platform [27636.438966] pci 0000:00:18.1: using default PCI settings [27636.438970] pci 0000:00:18.2: no hotplug settings from platform [27636.438971] pci 0000:00:18.2: using default PCI settings [27636.438975] k10temp 0000:00:18.3: no hotplug settings from platform [27636.438977] k10temp 0000:00:18.3: using default PCI settings [27636.438981] pci 0000:00:18.4: no hotplug settings from platform [27636.438982] pci 0000:00:18.4: using default PCI settings [27636.439009] radeon 0000:01:05.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [27636.439011] pci 0000:00:14.4: PCI bridge to [bus 07] [27636.439014] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] [27636.439028] pci 0000:00:00.0: no hotplug settings from platform [27636.439030] pci 0000:00:00.0: using default PCI settings [27636.439034] pci 0000:00:01.0: no hotplug settings from platform [27636.439036] pci 0000:00:01.0: using default PCI settings [27636.439042] radeon 0000:01:05.0: no hotplug settings from platform [27636.439044] radeon 0000:01:05.0: using default PCI settings [27636.439050] snd_hda_intel 0000:01:05.1: no hotplug settings from platform [27636.439052] snd_hda_intel 0000:01:05.1: using default PCI settings [27636.439056] pcieport 0000:00:04.0: no hotplug settings from platform [27636.439081] r8169 0000:02:00.0: no hotplug settings from platform [27636.439084] pcieport 0000:00:07.0: no hotplug settings from platform [27636.439088] pcieport 0000:00:09.0: no hotplug settings from platform [27636.439095] bcma-pci-bridge 0000:06:00.0: no hotplug settings from platform [27636.439098] ahci 0000:00:11.0: no hotplug settings from platform [27636.439100] ahci 0000:00:11.0: using default PCI settings [27636.439107] ohci-pci 0000:00:12.0: no hotplug settings from platform [27636.439109] ohci-pci 0000:00:12.0: using default PCI settings [27636.439116] ehci-pci 0000:00:12.2: no hotplug settings from platform [27636.439117] ehci-pci 0000:00:12.2: using default PCI settings [27636.439124] ohci-pci 0000:00:13.0: no hotplug settings from platform [27636.439126] ohci-pci 0000:00:13.0: using default PCI settings [27636.439133] ehci-pci 0000:00:13.2: no hotplug settings from platform [27636.439135] ehci-pci 0000:00:13.2: using default PCI settings [27636.439142] pci 0000:00:14.0: no hotplug settings from platform [27636.439144] pci 0000:00:14.0: using default PCI settings [27636.439151] snd_hda_intel 0000:00:14.2: no hotplug settings from platform [27636.439152] snd_hda_intel 0000:00:14.2: using default PCI settings [27636.439159] pci 0000:00:14.3: no hotplug settings from platform [27636.439161] pci 0000:00:14.3: using default PCI settings [27636.439168] pci 0000:00:14.4: no hotplug settings from platform [27636.439170] pci 0000:00:14.4: using default PCI settings [27636.439180] ohci-pci 0000:00:14.5: no hotplug settings from platform [27636.439182] ohci-pci 0000:00:14.5: using default PCI settings [27636.439189] ohci-pci 0000:00:16.0: no hotplug settings from platform [27636.439190] ohci-pci 0000:00:16.0: using default PCI settings [27636.439197] ehci-pci 0000:00:16.2: no hotplug settings from platform [27636.439199] ehci-pci 0000:00:16.2: using default PCI settings [27636.439206] pci 0000:00:18.0: no hotplug settings from platform [27636.439208] pci 0000:00:18.0: using default PCI settings [27636.439212] pci 0000:00:18.1: no hotplug settings from platform [27636.439213] pci 0000:00:18.1: using default PCI settings [27636.439217] pci 0000:00:18.2: no hotplug settings from platform [27636.439219] pci 0000:00:18.2: using default PCI settings [27636.439223] k10temp 0000:00:18.3: no hotplug settings from platform [27636.439224] k10temp 0000:00:18.3: using default PCI settings [27636.439228] pci 0000:00:18.4: no hotplug settings from platform [27636.439230] pci 0000:00:18.4: using default PCI settings [27636.439243] PM: Finishing wakeup. [27636.439244] Restarting tasks ... done. [27636.453295] video LNXVIDEO:00: Restoring backlight state [27640.046492] sd 3:0:0:0: [sdb] No Caching mode page found [27640.046500] sd 3:0:0:0: [sdb] Assuming drive cache: write through [27641.421083] r8169 0000:02:00.0 eth0: link down [27641.421170] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [27641.486378] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement) [27641.486393] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement) [27641.486549] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [27643.516747] wlan0: authenticate with 72:ab:25:eb:ba:39 [27643.516923] wlan0: send auth to 72:ab:25:eb:ba:39 (try 1/3) [27643.518540] wlan0: authenticated [27643.518944] brcmsmac bcma0:0 wlan0: disabling HT/VHT due to WEP/TKIP use [27643.521803] wlan0: associate with 72:ab:25:eb:ba:39 (try 1/3) [27643.524139] wlan0: RX AssocResp from 72:ab:25:eb:ba:39 (capab=0x411 status=0 aid=4) [27643.524950] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated [27643.524959] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement) [27643.524982] wlan0: associated [27643.525047] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [27644.463709] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement) [27719.451536] usb 5-1: new full-speed USB device number 2 using ohci-pci [27719.626764] usb 5-1: New USB device found, idVendor=03f0, idProduct=4d11 [27719.626777] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [27719.626784] usb 5-1: Product: PSC 1400 series [27719.626790] usb 5-1: Manufacturer: HP [27719.626795] usb 5-1: SerialNumber: BR5AR2G17704BM [27719.891539] WARNING! power/level is deprecated; use power/control instead [27725.108343] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27725.108372] usbcore: registered new interface driver usblp [27757.415224] systemd-hostnamed[21162]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [27784.174870] usblp0: removed [27784.182443] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27789.387419] usblp0: removed [27789.398546] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27794.414720] usblp0: removed [27794.422652] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27799.437291] usblp0: removed [27799.445641] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27804.458927] usblp0: removed [27804.466825] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27809.478588] usblp0: removed [27809.487920] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27814.505170] usblp0: removed [27814.513022] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27819.523281] usblp0: removed [27819.530100] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27824.545422] usblp0: removed [27824.552667] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27829.564438] usblp0: removed [27829.572810] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27834.584552] usblp0: removed [27834.592333] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27839.602498] usblp0: removed [27839.612963] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27844.625483] usblp0: removed [27844.636514] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27849.647429] usblp0: removed [27849.654706] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27854.668355] usblp0: removed [27854.675864] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27859.692050] usblp0: removed [27859.698886] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27864.710006] usblp0: removed [27864.717999] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27869.725437] usblp0: removed [27869.735951] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27874.746393] usblp0: removed [27874.761424] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27879.774407] usblp0: removed [27879.781281] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27884.790645] usblp0: removed [27884.800452] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27889.814418] usblp0: removed [27889.823276] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27894.840247] usblp0: removed [27894.848504] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27899.863094] usblp0: removed [27899.869983] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27904.881669] usblp0: removed [27904.888656] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27909.900021] usblp0: removed [27909.906778] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27914.250327] usblp0: removed [27914.257378] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27919.271067] usblp0: removed [27919.280220] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27924.300036] usblp0: removed [27924.306919] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27929.323495] usblp0: removed [27929.330533] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27934.343361] usblp0: removed [27934.350644] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27939.361670] usblp0: removed [27939.374562] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27944.391040] usblp0: removed [27944.398824] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27949.410747] usblp0: removed [27949.420217] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27951.323497] type=1400 audit(1427292752.634:72): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=21550 comm="apparmor_parser" [27951.323521] type=1400 audit(1427292752.634:73): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=21550 comm="apparmor_parser" [27951.324553] type=1400 audit(1427292752.638:74): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=21550 comm="apparmor_parser" [27952.142419] usblp0: removed [27952.153111] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27953.433642] usblp0: removed [27953.442862] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27958.460104] usblp0: removed [27958.472174] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27963.482735] usblp0: removed [27963.492022] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27968.504744] usblp0: removed [27968.514072] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27972.161495] usblp0: removed [27972.170385] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27977.189511] usblp0: removed [27977.197696] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27982.210305] usblp0: removed [27982.217461] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27987.231559] usblp0: removed [27987.238742] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27992.259861] usblp0: removed [27992.266647] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [27997.276839] usblp0: removed [27997.286379] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28002.298372] usblp0: removed [28002.311172] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28007.327358] usblp0: removed [28007.333999] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28012.346198] usblp0: removed [28012.352979] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28017.366711] usblp0: removed [28017.376551] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28022.394585] usblp0: removed [28022.401196] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28027.413660] usblp0: removed [28027.429974] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28032.449780] usblp0: removed [28032.456346] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28037.471195] usblp0: removed [28037.478537] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28042.488637] usblp0: removed [28042.496059] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28047.512186] usblp0: removed [28047.521118] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28052.532139] usblp0: removed [28052.550865] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28057.563670] usblp0: removed [28057.574215] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28062.580753] usblp0: removed [28062.587942] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28067.599200] usblp0: removed [28067.607080] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28072.619721] usblp0: removed [28072.628047] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28077.639237] usblp0: removed [28077.647254] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28082.657408] usblp0: removed [28082.668176] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28087.678874] usblp0: removed [28087.687828] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28092.697965] usblp0: removed [28092.709335] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28097.719462] usblp0: removed [28097.727911] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28102.738654] usblp0: removed [28102.746713] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28107.758583] usblp0: removed [28107.767615] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28112.779283] usblp0: removed [28112.787757] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28117.805890] usblp0: removed [28117.812897] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28122.823101] usblp0: removed [28122.833023] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28127.844075] usblp0: removed [28127.856094] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28132.867381] usblp0: removed [28132.879249] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28137.889866] usblp0: removed [28137.902223] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28142.914812] usblp0: removed [28142.923743] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28147.939898] usblp0: removed [28147.946733] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28152.954208] usblp0: removed [28152.962599] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28157.969336] usblp0: removed [28157.977861] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28162.992479] usblp0: removed [28162.999567] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28168.009762] usblp0: removed [28168.017503] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28173.025135] usblp0: removed [28173.036726] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28178.046835] usblp0: removed [28178.059810] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28183.077309] usblp0: removed [28183.085321] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28188.095547] usblp0: removed [28188.103288] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28193.113452] usblp0: removed [28193.124022] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28198.139988] usblp0: removed [28198.147269] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28203.157461] usblp0: removed [28203.172986] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28208.185506] usblp0: removed [28208.194466] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28213.206846] usblp0: removed [28213.215508] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28218.234820] usblp0: removed [28218.241646] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28223.251752] usblp0: removed [28223.265992] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28228.276187] usblp0: removed [28228.282781] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28233.296075] usblp0: removed [28233.308902] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28238.320556] usblp0: removed [28238.330534] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28243.339442] usblp0: removed [28243.348381] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28248.358663] usblp0: removed [28248.367038] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28250.670348] systemd-hostnamed[21924]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [28253.380738] usblp0: removed [28253.392102] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28258.408104] usblp0: removed [28258.417321] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28263.428858] usblp0: removed [28263.436527] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28268.457151] usblp0: removed [28268.464369] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28273.482873] usblp0: removed [28273.489479] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28278.500051] usblp0: removed [28278.514544] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28283.528260] usblp0: removed [28283.539344] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28288.550032] usblp0: removed [28288.558933] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28293.572191] usblp0: removed [28293.580480] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28298.599624] usblp0: removed [28298.606936] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28303.619762] usblp0: removed [28303.629110] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28308.639885] usblp0: removed [28308.652734] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28309.928017] usb 5-1: USB disconnect, device number 2 [28309.928499] usblp0: removed [28314.482977] usb 5-1: new full-speed USB device number 3 using ohci-pci [28314.658234] usb 5-1: New USB device found, idVendor=03f0, idProduct=4d11 [28314.658247] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [28314.658255] usb 5-1: Product: PSC 1400 series [28314.658261] usb 5-1: Manufacturer: HP [28314.658266] usb 5-1: SerialNumber: BR5AR2G17704BM [28314.664762] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28316.445457] usblp0: removed [28316.452921] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28318.674095] usblp0: removed [28318.682655] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28323.695726] usblp0: removed [28323.703628] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28328.713865] usblp0: removed [28328.723106] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28333.739871] usblp0: removed [28333.746938] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28338.758387] usblp0: removed [28338.766039] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28373.970782] usblp0: removed [28373.977734] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28378.988038] usblp0: removed [28378.995894] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28384.006138] usblp0: removed [28384.016803] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28389.027546] usblp0: removed [28389.036800] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28394.044721] usblp0: removed [28394.053291] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28399.060301] usblp0: removed [28399.072732] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28404.097924] usblp0: removed [28404.111066] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28409.122890] usblp0: removed [28409.136411] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28414.152661] usblp0: removed [28414.160665] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28419.180513] usblp0: removed [28419.189944] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28424.214037] usblp0: removed [28424.223712] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28429.240737] usblp0: removed [28429.251625] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28434.269102] usblp0: removed [28434.275657] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28439.287987] usblp0: removed [28439.295726] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28444.306090] usblp0: removed [28444.317765] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 [28516.079781] usblp0: removed [28516.081169] Did not find alt setting 1 for intf 0, config 1 [28656.434354] Did not find alt setting 1 for intf 0, config 1 [28658.438049] Did not find alt setting 1 for intf 0, config 1 [28660.440708] Did not find alt setting 1 for intf 0, config 1 [28662.443371] Did not find alt setting 1 for intf 0, config 1 [28664.445999] Did not find alt setting 1 for intf 0, config 1 [28666.448641] Did not find alt setting 1 for intf 0, config 1 [28810.495875] type=1400 audit(1427293611.110:75): apparmor="DENIED" operation="connect" profile="/usr/bin/evince-previewer" name="/run/dbus/system_bus_socket" pid=25191 comm="pool" requested_mask="rw" denied_mask="rw" fsuid=1000 ouid=0 [28810.498755] type=1400 audit(1427293611.114:76): apparmor="DENIED" operation="connect" profile="/usr/bin/evince-previewer" name="/run/dbus/system_bus_socket" pid=25191 comm="pool" requested_mask="rw" denied_mask="rw" fsuid=1000 ouid=0 [28854.638516] systemd-hostnamed[25229]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [28920.466111] Did not find alt setting 1 for intf 0, config 1 [28999.620631] Did not find alt setting 1 for intf 0, config 1 [29001.624287] Did not find alt setting 1 for intf 0, config 1 [29003.627014] Did not find alt setting 1 for intf 0, config 1 [29005.629626] Did not find alt setting 1 for intf 0, config 1 [29007.632259] Did not find alt setting 1 for intf 0, config 1 [32050.371055] [sched_delayed] \x014CE: hpet increased min_delta_ns to 20115 nsec [43453.193768] webapp-containe[28126]: segfault at 0 ip (null) sp 00007fff0b42b2f8 error 14 [45722.111260] usb 5-1: USB disconnect, device number 3