[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-22-generic (buildd@crested) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #35-Ubuntu SMP Tue Jun 1 14:18:25 UTC 2010 (Ubuntu 2.6.32-22.35-generic 2.6.32.11+drm33.2) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=44c73484-34ae-4bc9-a23a-f885b8672f14 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff90000 (usable) [ 0.000000] BIOS-e820: 00000000cff90000 - 00000000cffa8000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cffa8000 - 00000000cffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000130000000 aka 4864M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcff90 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009e000 (usable) [ 0.000000] modified: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e3000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cff90000 (usable) [ 0.000000] modified: 00000000cff90000 - 00000000cffa8000 (ACPI data) [ 0.000000] modified: 00000000cffa8000 - 00000000cffe0000 (ACPI NVS) [ 0.000000] modified: 00000000cffe0000 - 00000000d0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000cff90000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cff90000 page 4k [ 0.000000] kernel direct mapping tables up to cff90000 @ 10000-13000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0130000000 page 2M [ 0.000000] kernel direct mapping tables up to 130000000 @ 12000-14000 [ 0.000000] RAMDISK: 377b6000 - 37fefece [ 0.000000] ACPI: RSDP 00000000000fbb70 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000cff90000 00044 (v01 123009 RSDT1545 20091230 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cff90200 00084 (v01 123009 FACP1545 20091230 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000cff90450 0BC08 (v01 A1159 A1159000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS 00000000cffa8000 00040 [ 0.000000] ACPI: APIC 00000000cff90390 00080 (v01 123009 APIC1545 20091230 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cff90410 0003C (v01 123009 OEMMCFG 20091230 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cffa8040 00073 (v01 123009 OEMB1545 20091230 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000cff9c060 00038 (v01 123009 OEMHPET0 20091230 MSFT 00000097) [ 0.000000] ACPI: INFO 00000000cffa80c0 00124 (v01 123009 AMDINFO 20091230 MSFT 00000097) [ 0.000000] ACPI: NVHD 00000000cffa81f0 00554 (v01 123009 NVHDCP 20091230 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000cff9c0a0 0088C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000130000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] NODE_DATA [0000000000013000 - 0000000000017fff] [ 0.000000] bootmap [0000000000018000 - 000000000003dfff] pages 26 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a29e64] TEXT DATA BSS ==> [0001000000 - 0001a29e64] [ 0.000000] #3 [00377b6000 - 0037fefece] RAMDISK ==> [00377b6000 - 0037fefece] [ 0.000000] #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000] [ 0.000000] #5 [0001a2a000 - 0001a2a28c] BRK ==> [0001a2a000 - 0001a2a28c] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000cff90 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1048350 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 104 pages reserved [ 0.000000] DMA zone: 3822 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833480 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x508 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000 [ 0.000000] PM: Registered nosave memory: 00000000000e3000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cff90000 - 00000000cffa8000 [ 0.000000] PM: Registered nosave memory: 00000000cffa8000 - 00000000cffe0000 [ 0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000 [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91544 r8192 d23144 u524288 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031222 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=44c73484-34ae-4bc9-a23a-f885b8672f14 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 20000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Memory: 4048912k/4980736k available (5409k kernel code, 787336k absent, 144488k reserved, 2976k data, 876k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3000.343 MHz processor. [ 0.020005] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.67 BogoMIPS (lpj=30003390) [ 0.020023] Security Framework initialized [ 0.020036] AppArmor: AppArmor initialized [ 0.020270] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.021528] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.022103] Mount-cache hash table entries: 256 [ 0.022197] Initializing cgroup subsys ns [ 0.022200] Initializing cgroup subsys cpuacct [ 0.022202] Initializing cgroup subsys memory [ 0.022208] Initializing cgroup subsys devices [ 0.022209] Initializing cgroup subsys freezer [ 0.022211] Initializing cgroup subsys net_cls [ 0.022225] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.022227] CPU: L2 Cache: 512K (64 bytes/line) [ 0.022229] CPU 0/0x0 -> Node 0 [ 0.022231] tseg: 0000000000 [ 0.022243] CPU: Physical Processor ID: 0 [ 0.022244] CPU: Processor Core ID: 0 [ 0.022246] mce: CPU supports 6 MCE banks [ 0.022254] Performance Events: AMD PMU driver. [ 0.022257] ... version: 0 [ 0.022259] ... bit width: 48 [ 0.022260] ... generic registers: 4 [ 0.022261] ... value mask: 0000ffffffffffff [ 0.022262] ... max period: 00007fffffffffff [ 0.022264] ... fixed-purpose events: 0 [ 0.022265] ... event mask: 000000000000000f [ 0.030631] ACPI: Core revision 20090903 [ 0.045125] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.045129] ftrace: allocating 22518 entries in 89 pages [ 0.049967] Setting APIC routing to flat [ 0.050447] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.150481] CPU0: AMD Phenom(tm) II X4 945 Processor stepping 03 [ 0.160000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.030000] Initializing CPU#1 [ 0.030000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.030000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.030000] CPU 1/0x1 -> Node 0 [ 0.030000] CPU: Physical Processor ID: 0 [ 0.030000] CPU: Processor Core ID: 1 [ 0.310090] CPU1: AMD Phenom(tm) II X4 945 Processor stepping 03 [ 0.310099] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.320048] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.030000] Initializing CPU#2 [ 0.030000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.030000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.030000] CPU 2/0x2 -> Node 0 [ 0.030000] CPU: Physical Processor ID: 0 [ 0.030000] CPU: Processor Core ID: 2 [ 0.480101] CPU2: AMD Phenom(tm) II X4 945 Processor stepping 03 [ 0.480110] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.490046] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.030000] Initializing CPU#3 [ 0.030000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.030000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.030000] CPU 3/0x3 -> Node 0 [ 0.030000] CPU: Physical Processor ID: 0 [ 0.030000] CPU: Processor Core ID: 3 [ 0.650112] CPU3: AMD Phenom(tm) II X4 945 Processor stepping 03 [ 0.650125] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.660008] Brought up 4 CPUs [ 0.660010] Total of 4 processors activated (24000.97 BogoMIPS). [ 0.661769] CPU0 attaching sched-domain: [ 0.661771] domain 0: span 0-3 level MC [ 0.661773] groups: 0 1 2 3 [ 0.661777] CPU1 attaching sched-domain: [ 0.661778] domain 0: span 0-3 level MC [ 0.661779] groups: 1 2 3 0 [ 0.661782] CPU2 attaching sched-domain: [ 0.661784] domain 0: span 0-3 level MC [ 0.661785] groups: 2 3 0 1 [ 0.661788] CPU3 attaching sched-domain: [ 0.661789] domain 0: span 0-3 level MC [ 0.661790] groups: 3 0 1 2 [ 0.661859] devtmpfs: initialized [ 0.661859] regulator: core version 0.5 [ 0.661859] Time: 9:46:46 Date: 06/03/10 [ 0.661859] NET: Registered protocol family 16 [ 0.661859] node 0 link 0: io port [1000, ffffff] [ 0.661859] Trying to unpack rootfs image as initramfs... [ 0.661859] node 0 link 0: io port [1000, 1fff] [ 0.661859] TOM: 00000000d0000000 aka 3328M [ 0.661859] Fam 10h mmconf [e0000000, efffffff] [ 0.661859] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.661859] node 0 link 0: mmio [a0000, bffff] [ 0.661859] node 0 link 0: mmio [d0000000, fe0bffff] ==> [d0000000, dfffffff] and [f0000000, fe0bffff] [ 0.661859] TOM2: 0000000130000000 aka 4864M [ 0.661859] bus: [00,07] on node 0 link 0 [ 0.661859] bus: 00 index 0 io port: [0, ffff] [ 0.661859] bus: 00 index 1 mmio: [a0000, bffff] [ 0.661859] bus: 00 index 2 mmio: [d0000000, dfffffff] [ 0.661859] bus: 00 index 3 mmio: [f0000000, ffffffff] [ 0.661859] bus: 00 index 4 mmio: [130000000, fcffffffff] [ 0.661859] ACPI: bus type pci registered [ 0.661859] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.661859] PCI: Not using MMCONFIG. [ 0.661859] PCI: Using configuration type 1 for base access [ 0.661859] PCI: Using configuration type 1 for extended access [ 0.661859] bio: create slab at 0 [ 0.661859] ACPI: EC: Look up EC in DSDT [ 0.666225] ACPI: Executed 1 blocks of module-level executable AML code [ 0.784014] ACPI: Interpreter enabled [ 0.784020] ACPI: (supports S0 S1 S3 S4 S5) [ 0.784038] ACPI: Using IOAPIC for interrupt routing [ 0.784094] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.789897] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.795599] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.798489] Freeing initrd memory: 8423k freed [ 0.807848] ACPI Warning: Incorrect checksum in table [OEMB] - 43, should be 3A (20090903/tbutils-314) [ 0.808102] ACPI: No dock devices found. [ 0.808457] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.808705] pci 0000:00:01.0: reg 10 io port: [0x900-0x9ff] [ 0.808741] pci 0000:00:01.1: reg 10 io port: [0xe00-0xe3f] [ 0.808750] pci 0000:00:01.1: reg 20 io port: [0x600-0x63f] [ 0.808753] pci 0000:00:01.1: reg 24 io port: [0x700-0x73f] [ 0.808771] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.808776] pci 0000:00:01.1: PME# disabled [ 0.808829] pci 0000:00:01.3: reg 10 32bit mmio: [0xf7e80000-0xf7efffff] [ 0.808949] pci 0000:00:02.0: reg 10 32bit mmio: [0xf7e7e000-0xf7e7efff] [ 0.808970] pci 0000:00:02.0: supports D1 D2 [ 0.808971] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.808974] pci 0000:00:02.0: PME# disabled [ 0.808994] pci 0000:00:02.1: reg 10 32bit mmio: [0xf7e7fc00-0xf7e7fcff] [ 0.809019] pci 0000:00:02.1: supports D1 D2 [ 0.809020] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.809022] pci 0000:00:02.1: PME# disabled [ 0.809046] pci 0000:00:04.0: reg 10 32bit mmio: [0xf7e7d000-0xf7e7dfff] [ 0.809066] pci 0000:00:04.0: supports D1 D2 [ 0.809068] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.809070] pci 0000:00:04.0: PME# disabled [ 0.809091] pci 0000:00:04.1: reg 10 32bit mmio: [0xf7e7f800-0xf7e7f8ff] [ 0.809116] pci 0000:00:04.1: supports D1 D2 [ 0.809117] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.809120] pci 0000:00:04.1: PME# disabled [ 0.809150] pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf] [ 0.809178] pci 0000:00:07.0: reg 10 32bit mmio: [0xf7e78000-0xf7e7bfff] [ 0.809199] pci 0000:00:07.0: PME# supported from D3hot D3cold [ 0.809201] pci 0000:00:07.0: PME# disabled [ 0.809249] pci 0000:00:09.0: reg 10 io port: [0xc080-0xc087] [ 0.809252] pci 0000:00:09.0: reg 14 io port: [0xc000-0xc003] [ 0.809254] pci 0000:00:09.0: reg 18 io port: [0xbc00-0xbc07] [ 0.809257] pci 0000:00:09.0: reg 1c io port: [0xb880-0xb883] [ 0.809260] pci 0000:00:09.0: reg 20 io port: [0xb800-0xb80f] [ 0.809263] pci 0000:00:09.0: reg 24 32bit mmio: [0xf7e76000-0xf7e77fff] [ 0.809295] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf7e7c000-0xf7e7cfff] [ 0.809298] pci 0000:00:0a.0: reg 14 io port: [0xb480-0xb487] [ 0.809301] pci 0000:00:0a.0: reg 18 32bit mmio: [0xf7e7f400-0xf7e7f4ff] [ 0.809304] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xf7e7f000-0xf7e7f00f] [ 0.809322] pci 0000:00:0a.0: supports D1 D2 [ 0.809323] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.809327] pci 0000:00:0a.0: PME# disabled [ 0.809570] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.809576] pci 0000:00:10.0: PME# disabled [ 0.809848] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.809855] pci 0000:00:13.0: PME# disabled [ 0.810141] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.810152] pci 0000:00:14.0: PME# disabled [ 0.810280] pci 0000:01:0a.0: reg 10 32bit mmio: [0xf7fff800-0xf7ffffff] [ 0.810285] pci 0000:01:0a.0: reg 14 io port: [0xdc00-0xdc7f] [ 0.810315] pci 0000:01:0a.0: supports D2 [ 0.810316] pci 0000:01:0a.0: PME# supported from D2 D3hot D3cold [ 0.810319] pci 0000:01:0a.0: PME# disabled [ 0.810342] pci 0000:00:08.0: transparent bridge [ 0.810344] pci 0000:00:08.0: bridge io port: [0xd000-0xdfff] [ 0.810347] pci 0000:00:08.0: bridge 32bit mmio: [0xf7f00000-0xf7ffffff] [ 0.810374] pci 0000:02:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff] [ 0.810380] pci 0000:02:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.810386] pci 0000:02:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff] [ 0.810390] pci 0000:02:00.0: reg 24 io port: [0xec00-0xec7f] [ 0.810394] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfaf80000-0xfaffffff] [ 0.810455] pci 0000:00:10.0: bridge io port: [0xe000-0xefff] [ 0.810462] pci 0000:00:10.0: bridge 32bit mmio: [0xf8000000-0xfbffffff] [ 0.810475] pci 0000:00:10.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.810650] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.810866] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.810958] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0._PRT] [ 0.811014] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] [ 0.811066] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT] [ 0.825176] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. [ 0.825386] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 0.825594] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 0.825805] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *10 [ 0.826014] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10 [ 0.826220] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled. [ 0.826427] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled. [ 0.826633] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled. [ 0.826840] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled. [ 0.827046] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled. [ 0.827253] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled. [ 0.827459] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled. [ 0.827666] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled. [ 0.827875] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled. [ 0.828081] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled. [ 0.828288] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled. [ 0.828498] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *11 [ 0.828704] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled. [ 0.828911] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled. [ 0.829117] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled. [ 0.829327] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *15 [ 0.829534] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled. [ 0.829743] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled. [ 0.829952] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled. [ 0.830181] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled. [ 0.830388] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled. [ 0.830595] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled. [ 0.830801] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled. [ 0.831009] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled. [ 0.831216] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled. [ 0.831423] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled. [ 0.831630] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled. [ 0.831837] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled. [ 0.832044] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled. [ 0.832252] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled. [ 0.832459] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled. [ 0.832669] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *15 [ 0.832880] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11 [ 0.833090] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *15 [ 0.833300] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11 [ 0.833507] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled. [ 0.833717] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10 [ 0.833928] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *7 [ 0.834138] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 [ 0.834381] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.834592] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10 [ 0.834802] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10 [ 0.834895] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.834897] vgaarb: loaded [ 0.834968] SCSI subsystem initialized [ 0.835011] libata version 3.00 loaded. [ 0.835011] usbcore: registered new interface driver usbfs [ 0.835011] usbcore: registered new interface driver hub [ 0.835011] usbcore: registered new device driver usb [ 0.835011] ACPI: WMI: Mapper loaded [ 0.835011] PCI: Using ACPI for IRQ routing [ 0.835011] NetLabel: Initializing [ 0.835011] NetLabel: domain hash size = 128 [ 0.835011] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.835011] NetLabel: unlabeled traffic allowed by default [ 0.835011] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.835011] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.860009] Switching to clocksource tsc [ 0.860977] AppArmor: AppArmor Filesystem Enabled [ 0.860987] pnp: PnP ACPI init [ 0.860996] ACPI: bus type pnp registered [ 0.867273] pnp: PnP ACPI: found 13 devices [ 0.867274] ACPI: ACPI bus type pnp unregistered [ 0.867282] system 00:05: ioport range 0x4d0-0x4d1 has been reserved [ 0.867284] system 00:05: ioport range 0x800-0x80f has been reserved [ 0.867286] system 00:05: ioport range 0x500-0x57f has been reserved [ 0.867288] system 00:05: ioport range 0x580-0x5ff has been reserved [ 0.867290] system 00:05: ioport range 0x800-0x87f could not be reserved [ 0.867292] system 00:05: ioport range 0x880-0x8ff has been reserved [ 0.867294] system 00:05: ioport range 0xd00-0xd7f has been reserved [ 0.867299] system 00:05: ioport range 0xd80-0xdff has been reserved [ 0.867302] system 00:05: iomem range 0xfed04000-0xfed04fff has been reserved [ 0.867304] system 00:05: iomem range 0xfee01000-0xfeefffff has been reserved [ 0.867308] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.867310] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.867313] system 00:09: ioport range 0x230-0x23f has been reserved [ 0.867315] system 00:09: ioport range 0x290-0x29f has been reserved [ 0.867317] system 00:09: ioport range 0xa00-0xa0f has been reserved [ 0.867319] system 00:09: ioport range 0xa10-0xa1f has been reserved [ 0.867322] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved [ 0.867326] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.867327] system 00:0c: iomem range 0xc0000-0xcffff has been reserved [ 0.867329] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 0.867331] system 00:0c: iomem range 0x100000-0xcfffffff could not be reserved [ 0.867333] system 00:0c: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.872023] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 [ 0.872025] pci 0000:00:08.0: IO window: 0xd000-0xdfff [ 0.872028] pci 0000:00:08.0: MEM window: 0xf7f00000-0xf7ffffff [ 0.872030] pci 0000:00:08.0: PREFETCH window: disabled [ 0.872033] pci 0000:00:10.0: PCI bridge, secondary bus 0000:02 [ 0.872038] pci 0000:00:10.0: IO window: 0xe000-0xefff [ 0.872046] pci 0000:00:10.0: MEM window: 0xf8000000-0xfbffffff [ 0.872053] pci 0000:00:10.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.872065] pci 0000:00:13.0: PCI bridge, secondary bus 0000:03 [ 0.872066] pci 0000:00:13.0: IO window: disabled [ 0.872075] pci 0000:00:13.0: MEM window: disabled [ 0.872081] pci 0000:00:13.0: PREFETCH window: disabled [ 0.872093] pci 0000:00:14.0: PCI bridge, secondary bus 0000:04 [ 0.872094] pci 0000:00:14.0: IO window: disabled [ 0.872103] pci 0000:00:14.0: MEM window: disabled [ 0.872109] pci 0000:00:14.0: PREFETCH window: disabled [ 0.872124] pci 0000:00:08.0: setting latency timer to 64 [ 0.872426] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19 [ 0.872429] alloc irq_desc for 19 on node 0 [ 0.872430] alloc kstat_irqs on node 0 [ 0.872437] pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19 [ 0.872444] pci 0000:00:10.0: setting latency timer to 64 [ 0.872741] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 18 [ 0.872743] alloc irq_desc for 18 on node 0 [ 0.872744] alloc kstat_irqs on node 0 [ 0.872749] pci 0000:00:13.0: PCI INT A -> Link[LN3A] -> GSI 18 (level, low) -> IRQ 18 [ 0.872757] pci 0000:00:13.0: setting latency timer to 64 [ 0.873051] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 17 [ 0.873053] alloc irq_desc for 17 on node 0 [ 0.873054] alloc kstat_irqs on node 0 [ 0.873059] pci 0000:00:14.0: PCI INT A -> Link[LN4A] -> GSI 17 (level, low) -> IRQ 17 [ 0.873067] pci 0000:00:14.0: setting latency timer to 64 [ 0.873071] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.873073] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.873075] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] [ 0.873077] pci_bus 0000:01: resource 1 mem: [0xf7f00000-0xf7ffffff] [ 0.873078] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.873080] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.873082] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] [ 0.873083] pci_bus 0000:02: resource 1 mem: [0xf8000000-0xfbffffff] [ 0.873085] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.873110] NET: Registered protocol family 2 [ 0.873218] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.874064] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.876497] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.876801] TCP: Hash tables configured (established 524288 bind 65536) [ 0.876803] TCP reno registered [ 0.876879] NET: Registered protocol family 1 [ 0.939904] pci 0000:00:08.0: Enabling HT MSI Mapping [ 0.940003] pci 0000:00:09.0: Enabling HT MSI Mapping [ 0.940106] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 0.940282] pci 0000:02:00.0: Boot video device [ 0.940497] PCI-DMA: Disabling AGP. [ 0.940574] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.940576] PCI-DMA: using GART IOMMU. [ 0.940578] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.942411] Scanning for low memory corruption every 60 seconds [ 0.942501] audit: initializing netlink socket (disabled) [ 0.942509] type=2000 audit(1275558405.939:1): initialized [ 0.948374] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.949235] VFS: Disk quotas dquot_6.5.2 [ 0.949269] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.949643] fuse init (API version 7.13) [ 0.949694] msgmni has been set to 7924 [ 0.949897] alg: No test for stdrng (krng) [ 0.949935] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.949937] io scheduler noop registered [ 0.949938] io scheduler anticipatory registered [ 0.949939] io scheduler deadline registered [ 0.949962] io scheduler cfq registered (default) [ 0.950256] alloc irq_desc for 24 on node 0 [ 0.950257] alloc kstat_irqs on node 0 [ 0.950274] pcieport 0000:00:10.0: irq 24 for MSI/MSI-X [ 0.950293] pcieport 0000:00:10.0: setting latency timer to 64 [ 0.950679] alloc irq_desc for 25 on node 0 [ 0.950680] alloc kstat_irqs on node 0 [ 0.950695] pcieport 0000:00:13.0: irq 25 for MSI/MSI-X [ 0.950712] pcieport 0000:00:13.0: setting latency timer to 64 [ 0.951078] alloc irq_desc for 26 on node 0 [ 0.951079] alloc kstat_irqs on node 0 [ 0.951094] pcieport 0000:00:14.0: irq 26 for MSI/MSI-X [ 0.951111] pcieport 0000:00:14.0: setting latency timer to 64 [ 0.951257] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.951271] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.951339] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.951342] ACPI: Power Button [PWRB] [ 0.951374] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.951376] ACPI: Power Button [PWRF] [ 0.951648] processor LNXCPU:00: registered as cooling_device0 [ 0.951669] processor LNXCPU:01: registered as cooling_device1 [ 0.951688] processor LNXCPU:02: registered as cooling_device2 [ 0.951707] processor LNXCPU:03: registered as cooling_device3 [ 0.957483] Linux agpgart interface v0.103 [ 0.957503] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.957587] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.957787] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.958353] brd: module loaded [ 0.958639] loop: module loaded [ 0.958688] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.958821] pata_acpi 0000:00:06.0: setting latency timer to 64 [ 0.959013] Fixed MDIO Bus: probed [ 0.959031] PPP generic driver version 2.4.2 [ 0.959051] tun: Universal TUN/TAP device driver, 1.6 [ 0.959052] tun: (C) 1999-2004 Max Krasnyansky [ 0.959100] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.959427] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23 [ 0.959430] alloc irq_desc for 23 on node 0 [ 0.959431] alloc kstat_irqs on node 0 [ 0.959438] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23 [ 0.959463] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.959465] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.959485] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.959504] ehci_hcd 0000:00:02.1: debug port 1 [ 0.959511] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.959526] ehci_hcd 0000:00:02.1: irq 23, io mem 0xf7e7fc00 [ 0.969752] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.969824] usb usb1: configuration #1 chosen from 1 choice [ 0.969842] hub 1-0:1.0: USB hub found [ 0.969854] hub 1-0:1.0: 6 ports detected [ 0.970243] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 22 [ 0.970245] alloc irq_desc for 22 on node 0 [ 0.970246] alloc kstat_irqs on node 0 [ 0.970253] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 22 (level, low) -> IRQ 22 [ 0.970261] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 0.970263] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 0.970285] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 0.970301] ehci_hcd 0000:00:04.1: debug port 1 [ 0.970308] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported [ 0.970322] ehci_hcd 0000:00:04.1: irq 22, io mem 0xf7e7f800 [ 0.989755] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 0.989811] usb usb2: configuration #1 chosen from 1 choice [ 0.989829] hub 2-0:1.0: USB hub found [ 0.989833] hub 2-0:1.0: 6 ports detected [ 0.989900] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.990233] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21 [ 0.990235] alloc irq_desc for 21 on node 0 [ 0.990236] alloc kstat_irqs on node 0 [ 0.990243] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 21 (level, low) -> IRQ 21 [ 0.990252] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.990254] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.990276] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 [ 0.990296] ohci_hcd 0000:00:02.0: irq 21, io mem 0xf7e7e000 [ 1.051800] usb usb3: configuration #1 chosen from 1 choice [ 1.051815] hub 3-0:1.0: USB hub found [ 1.051820] hub 3-0:1.0: 6 ports detected [ 1.052195] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 20 [ 1.052197] alloc irq_desc for 20 on node 0 [ 1.052198] alloc kstat_irqs on node 0 [ 1.052204] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 20 (level, low) -> IRQ 20 [ 1.052213] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 1.052215] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 1.052236] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4 [ 1.052255] ohci_hcd 0000:00:04.0: irq 20, io mem 0xf7e7d000 [ 1.082073] usb usb4: configuration #1 chosen from 1 choice [ 1.082088] hub 4-0:1.0: USB hub found [ 1.082094] hub 4-0:1.0: 6 ports detected [ 1.082145] uhci_hcd: USB Universal Host Controller Interface driver [ 1.082188] PNP: No PS/2 controller found. Probing ports directly. [ 1.082600] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.082604] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.082660] mice: PS/2 mouse device common for all mice [ 1.082729] rtc_cmos 00:07: RTC can wake from S4 [ 1.082749] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.082798] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 1.082875] device-mapper: uevent: version 1.0.3 [ 1.082935] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.083019] device-mapper: multipath: version 1.1.0 loaded [ 1.083021] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.083185] cpuidle: using governor ladder [ 1.083186] cpuidle: using governor menu [ 1.083409] TCP cubic registered [ 1.083484] NET: Registered protocol family 10 [ 1.083772] lo: Disabled Privacy Extensions [ 1.083952] NET: Registered protocol family 17 [ 1.083989] powernow-k8: Found 1 AMD Phenom(tm) II X4 945 Processor processors (4 cpu cores) (version 2.20.00) [ 1.084012] powernow-k8: 0 : pstate 0 (3000 MHz) [ 1.084014] powernow-k8: 1 : pstate 1 (2300 MHz) [ 1.084015] powernow-k8: 2 : pstate 2 (1800 MHz) [ 1.084016] powernow-k8: 3 : pstate 3 (800 MHz) [ 1.084288] PM: Resume from disk failed. [ 1.084295] registered taskstats version 1 [ 1.084729] Magic number: 14:412:777 [ 1.084743] misc rfkill: hash matches [ 1.084829] rtc_cmos 00:07: setting system clock to 2010-06-03 09:46:47 UTC (1275558407) [ 1.084831] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.084832] EDD information not available. [ 1.084865] Freeing unused kernel memory: 876k freed [ 1.085028] Write protecting the kernel read-only data: 7680k [ 1.095410] udev: starting version 151 [ 1.119382] md: linear personality registered for level -1 [ 1.125683] pata_amd 0000:00:06.0: version 0.4.1 [ 1.125715] pata_amd 0000:00:06.0: setting latency timer to 64 [ 1.127370] scsi0 : pata_amd [ 1.127491] scsi1 : pata_amd [ 1.128471] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 1.128473] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 1.133745] ahci 0000:00:09.0: version 3.0 [ 1.134088] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 1.134091] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 1.134134] alloc irq_desc for 27 on node 0 [ 1.134136] alloc kstat_irqs on node 0 [ 1.134142] ahci 0000:00:09.0: irq 27 for MSI/MSI-X [ 1.134187] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.134190] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio boh [ 1.134192] ahci 0000:00:09.0: setting latency timer to 64 [ 1.134556] scsi2 : ahci [ 1.134638] scsi3 : ahci [ 1.134697] scsi4 : ahci [ 1.134748] scsi5 : ahci [ 1.134800] scsi6 : ahci [ 1.134885] scsi7 : ahci [ 1.134924] md: multipath personality registered for level -4 [ 1.134991] ata3: SATA max UDMA/133 abar m8192@0xf7e76000 port 0xf7e76100 irq 27 [ 1.134993] ata4: SATA max UDMA/133 abar m8192@0xf7e76000 port 0xf7e76180 irq 27 [ 1.134995] ata5: SATA max UDMA/133 abar m8192@0xf7e76000 port 0xf7e76200 irq 27 [ 1.134997] ata6: SATA max UDMA/133 abar m8192@0xf7e76000 port 0xf7e76280 irq 27 [ 1.134999] ata7: SATA max UDMA/133 abar m8192@0xf7e76000 port 0xf7e76300 irq 27 [ 1.135001] ata8: SATA max UDMA/133 abar m8192@0xf7e76000 port 0xf7e76380 irq 27 [ 1.135077] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.135422] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22 [ 1.135425] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22 [ 1.135428] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 1.153842] FDC 0 is a post-1991 82077 [ 1.211138] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr e0:cb:4e:02:28:c3 [ 1.211141] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3 [ 1.300323] ata1.00: ATAPI: SONY DVD RW AW-G170A, 1.62, max UDMA/66 [ 1.300340] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:900:0x11) [ 1.340279] ata1.00: configured for UDMA/66 [ 1.341422] scsi 0:0:0:0: CD-ROM SONY DVD RW AW-G170A 1.62 PQ: 0 ANSI: 5 [ 1.343740] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.343743] Uniform CD-ROM driver Revision: 3.20 [ 1.343821] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.343871] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.343929] ata2: port disabled. ignoring. [ 1.480031] ata8: SATA link down (SStatus 0 SControl 300) [ 1.481275] ata6: SATA link down (SStatus 0 SControl 300) [ 1.481288] ata7: SATA link down (SStatus 0 SControl 300) [ 1.660016] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.660026] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.660032] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.660690] ata4.00: ATA-8: WDC WD1600AAJS-00L7A0, 01.03E01, max UDMA/133 [ 1.660692] ata4.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.661203] ata5.00: ATA-7: Maxtor 6L160M0, BANC1G10, max UDMA/100 [ 1.661205] ata5.00: 312581808 sectors, multi 0: LBA48 [ 1.662428] ata4.00: configured for UDMA/133 [ 1.663291] ata5.00: configured for UDMA/100 [ 1.694085] ata3.00: ATA-8: WDC WD1600AAJS-08WAA0, 58.01D58, max UDMA/100 [ 1.694087] ata3.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.694837] ata3.00: configured for UDMA/100 [ 1.694907] scsi 2:0:0:0: Direct-Access ATA WDC WD1600AAJS-0 58.0 PQ: 0 ANSI: 5 [ 1.695003] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.695011] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.695037] sd 2:0:0:0: [sda] Write Protect is off [ 1.695039] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.695056] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.695105] scsi 3:0:0:0: Direct-Access ATA WDC WD1600AAJS-0 01.0 PQ: 0 ANSI: 5 [ 1.695140] sda: [ 1.695190] sd 3:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.695210] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 1.695215] sd 3:0:0:0: [sdb] Write Protect is off [ 1.695217] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.695230] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.695279] scsi 4:0:0:0: Direct-Access ATA Maxtor 6L160M0 BANC PQ: 0 ANSI: 5 [ 1.695313] sdb: [ 1.695347] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 1.695414] sd 4:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.695441] sd 4:0:0:0: [sdc] Write Protect is off [ 1.695443] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.695455] sd 4:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1.695529] sdc: sda1 sda2 [ 1.699667] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.702549] sdb1 sdb2 [ 1.702704] sd 3:0:0:0: [sdb] Attached SCSI disk [ 1.714593] sdc1 [ 1.714738] sd 4:0:0:0: [sdc] Attached SCSI disk [ 1.716888] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 16 [ 1.716891] alloc irq_desc for 16 on node 0 [ 1.716892] alloc kstat_irqs on node 0 [ 1.716900] ohci1394 0000:01:0a.0: PCI INT A -> Link[LNKD] -> GSI 16 (level, low) -> IRQ 16 [ 1.716945] md: raid0 personality registered for level 0 [ 1.719217] md: raid1 personality registered for level 1 [ 1.721125] async_tx: api initialized (async) [ 1.721549] xor: automatically using best checksumming function: generic_sse [ 1.730021] usb 4-3: new low speed USB device using ohci_hcd and address 2 [ 1.770002] generic_sse: 12306.400 MB/sec [ 1.770003] xor: using function: generic_sse (12306.400 MB/sec) [ 1.772051] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f7fff800-f7ffffff] Max Packet=[2048] IR/IT contexts=[4/8] [ 1.831160] md: bind [ 1.940014] raid6: int64x1 2553 MB/s [ 1.957998] usb 4-3: configuration #1 chosen from 1 choice [ 1.970282] usbcore: registered new interface driver hiddev [ 1.976061] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:04.0/usb4/4-3/4-3:1.0/input/input3 [ 1.976124] generic-usb 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:04.0-3/input0 [ 1.976138] usbcore: registered new interface driver usbhid [ 1.976140] usbhid: v2.6:USB HID core driver [ 2.110003] raid6: int64x2 3524 MB/s [ 2.280017] raid6: int64x4 2686 MB/s [ 2.300020] usb 3-2: new full speed USB device using ohci_hcd and address 2 [ 2.450002] raid6: int64x8 2344 MB/s [ 2.529642] usb 3-2: configuration #1 chosen from 1 choice [ 2.620015] raid6: sse2x1 4034 MB/s [ 2.790011] raid6: sse2x2 6738 MB/s [ 2.870020] usb 3-3: new low speed USB device using ohci_hcd and address 3 [ 2.960011] raid6: sse2x4 7918 MB/s [ 2.960011] raid6: using algorithm sse2x4 (7918 MB/s) [ 2.963354] md: raid6 personality registered for level 6 [ 2.963356] md: raid5 personality registered for level 5 [ 2.963358] md: raid4 personality registered for level 4 [ 2.967526] md: raid10 personality registered for level 10 [ 2.972217] md: bind [ 2.974337] raid1: raid set md0 active with 2 out of 2 mirrors [ 2.974351] md0: detected capacity change from 0 to 157012262912 [ 2.974659] md: bind [ 2.975047] md0: [ 2.976750] md: bind [ 2.977744] raid1: raid set md1 active with 2 out of 2 mirrors [ 2.977759] md1: detected capacity change from 0 to 3026780160 [ 2.978218] unknown partition table [ 2.978415] md1: p1 [ 2.979988] md1: p1 size 5911857 exceeds device capacity, limited to end of disk [ 3.090134] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0000bd826e] [ 3.113603] usb 3-3: configuration #1 chosen from 1 choice [ 3.128692] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.0/input/input4 [ 3.128736] generic-usb 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:02.0-3/input0 [ 3.146621] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.1/input/input5 [ 3.146665] generic-usb 0003:045E:00DD.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:02.0-3/input1 [ 8.064633] kjournald starting. Commit interval 5 seconds [ 8.064640] EXT3-fs: mounted filesystem with ordered data mode. [ 11.336418] Adding 2955832k swap on /dev/md1. Priority:-1 extents:1 across:2955832k [ 11.802160] udev: starting version 151 [ 12.768237] type=1505 audit(1275558419.175:2): operation="profile_load" pid=694 name="/sbin/dhclient3" [ 12.768420] type=1505 audit(1275558419.175:3): operation="profile_load" pid=694 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 12.768521] type=1505 audit(1275558419.175:4): operation="profile_load" pid=694 name="/usr/lib/connman/scripts/dhclient-script" [ 12.803838] EXT3 FS on md0, internal journal [ 13.213424] EXT4-fs (sdc1): mounted filesystem with ordered data mode [ 13.322050] vga16fb: initializing [ 13.322053] vga16fb: mapped to 0xffff8800000a0000 [ 13.477300] Console: switching to colour frame buffer device 80x30 [ 13.481944] fb0: VGA16 VGA frame buffer device [ 13.484953] i2c i2c-0: nForce2 SMBus adapter at 0x600 [ 13.484957] ACPI: resource nForce2_smbus [0x700-0x73f] conflicts with ACPI region SM00 [0x700-0x73f] [ 13.484958] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.484960] nForce2_smbus 0000:00:01.1: Error probing SMB2. [ 13.605558] lp: driver loaded but no devices found [ 14.167742] type=1505 audit(1275558420.575:5): operation="profile_load" pid=704 name="/usr/sbin/ntpd" [ 14.296389] nvidia: module license 'NVIDIA' taints kernel. [ 14.296393] Disabling lock debugging due to kernel taint [ 14.582985] EDAC MC: Ver: 2.1.0 Jun 1 2010 [ 14.830445] nvidia 0000:02:00.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19 [ 14.830452] nvidia 0000:02:00.0: setting latency timer to 64 [ 14.830455] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 14.830614] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.15 Fri Mar 12 00:29:13 PST 2010 [ 14.886845] EDAC amd64_edac: Ver: 3.2.0 Jun 1 2010 [ 14.886942] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 14.886948] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 14.886949] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 14.886950] (Note that use of the override may cause unknown side effects.) [ 14.886966] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 15.971149] usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1D17 [ 15.971166] usbcore: registered new interface driver usblp [ 16.468196] HDA Intel 0000:00:07.0: power state changed by ACPI to D0 [ 16.468515] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 16.468519] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21 [ 16.468521] hda_intel: Disable MSI for Nvidia chipset [ 16.468554] HDA Intel 0000:00:07.0: setting latency timer to 64 [ 17.888545] type=1505 audit(1275558424.295:6): operation="profile_load" pid=1049 name="/usr/share/gdm/guest-session/Xsession" [ 17.889552] type=1505 audit(1275558424.295:7): operation="profile_replace" pid=1057 name="/sbin/dhclient3" [ 17.889742] type=1505 audit(1275558424.295:8): operation="profile_replace" pid=1057 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 17.889849] type=1505 audit(1275558424.295:9): operation="profile_replace" pid=1057 name="/usr/lib/connman/scripts/dhclient-script" [ 18.057551] type=1505 audit(1275558424.465:10): operation="profile_load" pid=1058 name="/usr/bin/evince" [ 18.059852] type=1505 audit(1275558424.465:11): operation="profile_load" pid=1058 name="/usr/bin/evince-previewer" [ 18.062388] type=1505 audit(1275558424.475:12): operation="profile_load" pid=1058 name="/usr/bin/evince-thumbnailer" [ 18.368713] type=1505 audit(1275558424.775:13): operation="profile_load" pid=1066 name="/usr/lib/cups/backend/cups-pdf" [ 18.368944] type=1505 audit(1275558424.775:14): operation="profile_load" pid=1066 name="/usr/sbin/cupsd" [ 18.406403] type=1505 audit(1275558424.815:15): operation="profile_replace" pid=1068 name="/usr/sbin/ntpd" [ 21.272209] alloc irq_desc for 28 on node 0 [ 21.272212] alloc kstat_irqs on node 0 [ 21.272219] forcedeth 0000:00:0a.0: irq 28 for MSI/MSI-X