[ 25.638] X.Org X Server 1.13.2 Release Date: 2013-01-24 [ 25.638] X Protocol Version 11, Revision 0 [ 25.638] Build Operating System: Linux 3.2.0-37-generic i686 Ubuntu [ 25.638] Current Operating System: Linux evgesha-TravelMate-2350 3.8.0-6-generic #13-Ubuntu SMP Thu Feb 14 17:23:12 UTC 2013 i686 [ 25.638] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-6-generic root=UUID=4a347fe8-6dd7-4d1c-a8b7-59532b55ebaa ro noresume ipv6.disable=1 [ 25.639] Build Date: 09 February 2013 07:21:55AM [ 25.639] xorg-server 2:1.13.2-0ubuntu2 (For technical support please see http://www.ubuntu.com/support) [ 25.639] Current version of pixman: 0.28.2 [ 25.639] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 25.639] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 25.639] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 19 16:59:39 2013 [ 25.661] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 25.661] (==) No Layout section. Using the first Screen section. [ 25.661] (==) No screen section available. Using defaults. [ 25.661] (**) |-->Screen "Default Screen Section" (0) [ 25.661] (**) | |-->Monitor "" [ 25.662] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 25.662] (==) Automatically adding devices [ 25.662] (==) Automatically enabling devices [ 25.662] (==) Automatically adding GPU devices [ 25.662] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 25.662] Entry deleted from font path. [ 25.662] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 25.662] Entry deleted from font path. [ 25.662] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 25.662] Entry deleted from font path. [ 25.662] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 25.662] Entry deleted from font path. [ 25.662] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 25.662] Entry deleted from font path. [ 25.662] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 25.662] Entry deleted from font path. [ 25.662] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 25.662] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 25.662] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 25.662] (II) Loader magic: 0xb77d46a0 [ 25.662] (II) Module ABI versions: [ 25.662] X.Org ANSI C Emulation: 0.4 [ 25.662] X.Org Video Driver: 13.1 [ 25.662] X.Org XInput driver : 18.0 [ 25.662] X.Org Server Extension : 7.0 [ 25.663] (II) config/udev: Adding drm device (/dev/dri/card0) [ 25.672] (--) PCI:*(0:0:2:0) 8086:3582:1025:0071 rev 2, Mem @ 0xb0000000/134217728, 0xf0000000/524288, I/O @ 0x0000e000/8 [ 25.672] (--) PCI: (0:0:2:1) 8086:3582:1025:0071 rev 2, Mem @ 0x40000000/134217728, 0x48000000/524288 [ 25.672] (II) Open ACPI successful (/var/run/acpid.socket) [ 25.673] Initializing built-in extension Generic Event Extension [ 25.673] Initializing built-in extension SHAPE [ 25.673] Initializing built-in extension MIT-SHM [ 25.673] Initializing built-in extension XInputExtension [ 25.673] Initializing built-in extension XTEST [ 25.673] Initializing built-in extension BIG-REQUESTS [ 25.673] Initializing built-in extension SYNC [ 25.673] Initializing built-in extension XKEYBOARD [ 25.673] Initializing built-in extension XC-MISC [ 25.673] Initializing built-in extension SECURITY [ 25.673] Initializing built-in extension XINERAMA [ 25.673] Initializing built-in extension XFIXES [ 25.673] Initializing built-in extension RENDER [ 25.673] Initializing built-in extension RANDR [ 25.673] Initializing built-in extension COMPOSITE [ 25.673] Initializing built-in extension DAMAGE [ 25.673] Initializing built-in extension MIT-SCREEN-SAVER [ 25.673] Initializing built-in extension DOUBLE-BUFFER [ 25.673] Initializing built-in extension RECORD [ 25.673] Initializing built-in extension DPMS [ 25.673] Initializing built-in extension X-Resource [ 25.673] Initializing built-in extension XVideo [ 25.673] Initializing built-in extension XVideo-MotionCompensation [ 25.673] Initializing built-in extension SELinux [ 25.673] Initializing built-in extension XFree86-VidModeExtension [ 25.673] Initializing built-in extension XFree86-DGA [ 25.673] Initializing built-in extension XFree86-DRI [ 25.673] Initializing built-in extension DRI2 [ 25.673] (II) LoadModule: "glx" [ 25.714] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 25.715] (II) Module glx: vendor="X.Org Foundation" [ 25.715] compiled for 1.13.2, module version = 1.0.0 [ 25.715] ABI class: X.Org Server Extension, version 7.0 [ 25.715] (==) AIGLX enabled [ 25.715] Loading extension GLX [ 25.715] (==) Matched intel as autoconfigured driver 0 [ 25.715] (==) Matched intel as autoconfigured driver 1 [ 25.715] (==) Matched vesa as autoconfigured driver 2 [ 25.715] (==) Matched modesetting as autoconfigured driver 3 [ 25.715] (==) Matched fbdev as autoconfigured driver 4 [ 25.715] (==) Assigned the driver to the xf86ConfigLayout [ 25.715] (II) LoadModule: "intel" [ 25.740] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 25.741] (II) Module intel: vendor="X.Org Foundation" [ 25.741] compiled for 1.13.2, module version = 2.21.2 [ 25.741] Module class: X.Org Video Driver [ 25.741] ABI class: X.Org Video Driver, version 13.1 [ 25.741] (II) LoadModule: "vesa" [ 25.741] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 25.741] (II) Module vesa: vendor="X.Org Foundation" [ 25.741] compiled for 1.12.99.902, module version = 2.3.2 [ 25.741] Module class: X.Org Video Driver [ 25.741] ABI class: X.Org Video Driver, version 13.0 [ 25.742] (II) LoadModule: "modesetting" [ 25.742] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 25.742] (II) Module modesetting: vendor="X.Org Foundation" [ 25.742] compiled for 1.13.1.901, module version = 0.6.0 [ 25.742] Module class: X.Org Video Driver [ 25.742] ABI class: X.Org Video Driver, version 13.1 [ 25.742] (II) LoadModule: "fbdev" [ 25.743] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 25.743] (II) Module fbdev: vendor="X.Org Foundation" [ 25.743] compiled for 1.12.99.902, module version = 0.4.3 [ 25.743] Module class: X.Org Video Driver [ 25.743] ABI class: X.Org Video Driver, version 13.0 [ 25.743] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2), Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2), Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2), Haswell Server (GT2+), Haswell SDV Desktop (GT1), Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+), Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2), Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1), Haswell SDV Server (GT2), Haswell SDV Server (GT2+), Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2), Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1), Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+), Haswell ULT Server (GT1), Haswell ULT Server (GT2), Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1), Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+), Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2), Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1), Haswell CRW Server (GT2), Haswell CRW Server (GT2+), ValleyView PO board [ 25.744] (II) VESA: driver for VESA chipsets: vesa [ 25.744] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 25.744] (II) FBDEV: driver for framebuffer: fbdev [ 25.744] (++) using VT number 7 [ 25.744] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.21.2-0ubuntu1 (Timo Aaltonen ) [ 25.745] (WW) Falling back to old probe method for vesa [ 25.745] (WW) Falling back to old probe method for modesetting [ 25.745] (WW) Falling back to old probe method for fbdev [ 25.745] (II) Loading sub module "fbdevhw" [ 25.745] (II) LoadModule: "fbdevhw" [ 25.745] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 25.745] (II) Module fbdevhw: vendor="X.Org Foundation" [ 25.745] compiled for 1.13.2, module version = 0.0.2 [ 25.745] ABI class: X.Org Video Driver, version 13.1 [ 25.745] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 25.745] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 25.745] (==) intel(0): RGB weight 888 [ 25.745] (==) intel(0): Default visual is TrueColor [ 25.745] (--) intel(0): Integrated Graphics Chipset: Intel(R) 852GM/855GM [ 25.750] (**) intel(0): Framebuffer tiled [ 25.750] (**) intel(0): Pixmaps tiled [ 25.750] (**) intel(0): "Tear free" disabled [ 25.750] (**) intel(0): Forcing per-crtc-pixmaps? no [ 25.750] (II) intel(0): Output LVDS1 has no monitor section [ 25.750] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware') [ 25.983] (II) intel(0): Output VGA1 has no monitor section [ 25.983] (II) intel(0): EDID for output LVDS1 [ 25.983] (II) intel(0): Manufacturer: TNJ Model: 1cad Serial#: 1955 [ 25.983] (II) intel(0): Year: 2005 Week: 24 [ 25.983] (II) intel(0): EDID Version: 1.2 [ 25.983] (II) intel(0): Digital Display Input [ 25.983] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 21 [ 25.983] (II) intel(0): Gamma: 2.20 [ 25.983] (II) intel(0): No DPMS capabilities specified [ 25.983] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 25.983] (II) intel(0): redX: 0.577 redY: 0.338 greenX: 0.310 greenY: 0.554 [ 25.983] (II) intel(0): blueX: 0.158 blueY: 0.124 whiteX: 0.313 whiteY: 0.329 [ 25.983] (II) intel(0): Supported established timings: [ 25.983] (II) intel(0): 1024x768@60Hz [ 25.983] (II) intel(0): Manufacturer's mask: 0 [ 25.983] (II) intel(0): Supported detailed timing: [ 25.983] (II) intel(0): clock: 65.0 MHz Image Size: 286 x 214 mm [ 25.983] (II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1320 h_border: 0 [ 25.983] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 803 v_border: 0 [ 25.983] (II) intel(0): Unknown vendor-specific block f [ 25.983] (II) intel(0): [ 25.983] (II) intel(0): [ 25.983] (II) intel(0): EDID (in hex): [ 25.983] (II) intel(0): 00ffffffffffff0051caad1ca3070000 [ 25.983] (II) intel(0): 180f0102801d157808e7b593564f8d28 [ 25.983] (II) intel(0): 1f505400080001010101010101010101 [ 25.983] (II) intel(0): 01010101010164190028410023301888 [ 25.983] (II) intel(0): 36001ed6100000180000000f00000000 [ 25.983] (II) intel(0): 00000000000000000000000000fe0000 [ 25.983] (II) intel(0): 000000000000000000000000000000fe [ 25.983] (II) intel(0): 00000000000000000000000000000082 [ 25.986] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 25.986] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 25.986] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 25.986] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 25.986] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 25.986] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 25.986] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 25.986] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 25.986] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 25.986] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 25.986] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) [ 25.986] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 25.986] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 25.986] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 25.986] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported) [ 25.986] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported) [ 25.986] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 25.986] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 25.986] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) [ 25.986] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) [ 25.986] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 25.986] (II) intel(0): Printing probed modes for output LVDS1 [ 25.986] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 25.987] (II) intel(0): Modeline "1024x768"x61.3 65.00 1024 1048 1184 1320 768 771 777 803 -hsync -vsync (49.2 kHz e) [ 25.987] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 25.987] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 25.987] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 25.987] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 26.215] (II) intel(0): EDID for output VGA1 [ 26.215] (II) intel(0): Output LVDS1 connected [ 26.215] (II) intel(0): Output VGA1 disconnected [ 26.215] (II) intel(0): Using exact sizes for initial modes [ 26.215] (II) intel(0): Output LVDS1 using initial mode 1024x768 [ 26.215] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 26.215] (==) intel(0): DPI set to (96, 96) [ 26.215] (II) Loading sub module "dri2" [ 26.215] (II) LoadModule: "dri2" [ 26.215] (II) Module "dri2" already built-in [ 26.215] (II) UnloadModule: "vesa" [ 26.215] (II) Unloading vesa [ 26.215] (II) UnloadModule: "modesetting" [ 26.215] (II) Unloading modesetting [ 26.215] (II) UnloadModule: "fbdev" [ 26.215] (II) Unloading fbdev [ 26.215] (II) UnloadSubModule: "fbdevhw" [ 26.215] (II) Unloading fbdevhw [ 26.217] (==) Depth 24 pixmap format is 32 bpp [ 26.217] (II) intel(0): SNA initialized with gen2 backend [ 26.217] (==) intel(0): Backing store disabled [ 26.217] (==) intel(0): Silken mouse enabled [ 26.217] (II) intel(0): HW Cursor enabled [ 26.217] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 26.222] (==) intel(0): DPMS enabled [ 26.222] (WW) intel(0): Textured video not supported on this hardware [ 26.222] (II) intel(0): [DRI2] Setup complete [ 26.222] (II) intel(0): [DRI2] DRI driver: i915 [ 26.222] (II) intel(0): direct rendering: DRI2 Enabled [ 26.222] (==) intel(0): hotplug detection: "enabled" [ 26.223] (--) RandR disabled [ 26.252] (II) SELinux: Disabled on system [ 26.268] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 26.268] (II) AIGLX: enabled GLX_INTEL_swap_event [ 26.268] (II) AIGLX: enabled GLX_ARB_create_context [ 26.268] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 26.268] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 26.268] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 26.268] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 26.269] (II) AIGLX: Loaded and initialized i915 [ 26.269] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 26.270] (II) intel(0): switch to mode 1024x768 on crtc 4 (pipe 1) [ 26.304] (II) intel(0): Setting screen physical size to 270 x 203 [ 26.321] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 26.331] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 26.331] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 26.331] (II) LoadModule: "evdev" [ 26.331] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 26.348] (II) Module evdev: vendor="X.Org Foundation" [ 26.348] compiled for 1.13.0, module version = 2.7.3 [ 26.348] Module class: X.Org XInput Driver [ 26.348] ABI class: X.Org XInput driver, version 18.0 [ 26.348] (II) Using input driver 'evdev' for 'Power Button' [ 26.348] (**) Power Button: always reports core events [ 26.348] (**) evdev: Power Button: Device: "/dev/input/event3" [ 26.348] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 26.348] (--) evdev: Power Button: Found keys [ 26.348] (II) evdev: Power Button: Configuring as keyboard [ 26.348] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3" [ 26.348] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 26.348] (**) Option "xkb_rules" "evdev" [ 26.348] (**) Option "xkb_model" "pc105" [ 26.348] (**) Option "xkb_layout" "us,ru" [ 26.348] (**) Option "xkb_variant" "," [ 26.348] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll" [ 26.366] (II) XKB: reuse xkmfile /var/lib/xkb/server-5BD46092C922CD443B4EABE4B26B5EFCDED629BD.xkm [ 26.367] (II) config/udev: Adding input device Video Bus (/dev/input/event5) [ 26.367] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 26.367] (II) Using input driver 'evdev' for 'Video Bus' [ 26.383] (**) Video Bus: always reports core events [ 26.383] (**) evdev: Video Bus: Device: "/dev/input/event5" [ 26.383] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 26.383] (--) evdev: Video Bus: Found keys [ 26.383] (II) evdev: Video Bus: Configuring as keyboard [ 26.383] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input5/event5" [ 26.383] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 26.383] (**) Option "xkb_rules" "evdev" [ 26.383] (**) Option "xkb_model" "pc105" [ 26.383] (**) Option "xkb_layout" "us,ru" [ 26.383] (**) Option "xkb_variant" "," [ 26.383] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll" [ 26.386] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 26.386] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 26.386] (II) Using input driver 'evdev' for 'Power Button' [ 26.386] (**) Power Button: always reports core events [ 26.386] (**) evdev: Power Button: Device: "/dev/input/event1" [ 26.386] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 26.386] (--) evdev: Power Button: Found keys [ 26.386] (II) evdev: Power Button: Configuring as keyboard [ 26.386] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1" [ 26.386] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 26.386] (**) Option "xkb_rules" "evdev" [ 26.386] (**) Option "xkb_model" "pc105" [ 26.386] (**) Option "xkb_layout" "us,ru" [ 26.386] (**) Option "xkb_variant" "," [ 26.386] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll" [ 26.387] (II) config/udev: Adding input device Lid Switch (/dev/input/event0) [ 26.387] (II) No input driver specified, ignoring this device. [ 26.387] (II) This device may have been added with another device file. [ 26.387] (II) config/udev: Adding input device Sleep Button (/dev/input/event2) [ 26.387] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 26.387] (II) Using input driver 'evdev' for 'Sleep Button' [ 26.387] (**) Sleep Button: always reports core events [ 26.387] (**) evdev: Sleep Button: Device: "/dev/input/event2" [ 26.387] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 26.387] (--) evdev: Sleep Button: Found keys [ 26.387] (II) evdev: Sleep Button: Configuring as keyboard [ 26.387] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2" [ 26.387] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9) [ 26.388] (**) Option "xkb_rules" "evdev" [ 26.388] (**) Option "xkb_model" "pc105" [ 26.388] (**) Option "xkb_layout" "us,ru" [ 26.388] (**) Option "xkb_variant" "," [ 26.388] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll" [ 26.389] (II) config/udev: Adding drm device (/dev/dri/card0) [ 26.390] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4) [ 26.390] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 26.390] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 26.390] (**) AT Translated Set 2 keyboard: always reports core events [ 26.390] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4" [ 26.390] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 26.390] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 26.390] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 26.390] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4" [ 26.390] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10) [ 26.390] (**) Option "xkb_rules" "evdev" [ 26.390] (**) Option "xkb_model" "pc105" [ 26.390] (**) Option "xkb_layout" "us,ru" [ 26.390] (**) Option "xkb_variant" "," [ 26.390] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll" [ 26.391] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6) [ 26.391] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 26.391] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 26.391] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons" [ 26.391] (II) LoadModule: "synaptics" [ 26.392] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 26.392] (II) Module synaptics: vendor="X.Org Foundation" [ 26.392] compiled for 1.13.1.901, module version = 1.6.2 [ 26.392] Module class: X.Org XInput Driver [ 26.392] ABI class: X.Org XInput driver, version 18.0 [ 26.392] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 26.392] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 26.392] (**) Option "Device" "/dev/input/event6" [ 26.392] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 [ 26.392] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 [ 26.392] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 26.392] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15 [ 26.392] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple [ 26.392] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 26.392] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 26.392] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 26.392] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input6/event6" [ 26.392] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11) [ 26.392] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 [ 26.393] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75 [ 26.393] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040 [ 26.393] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 26.393] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 26.393] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 26.393] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 26.393] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 26.393] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) [ 26.393] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates" [ 28.828] (II) intel(0): EDID vendor "TNJ", prod id 7341 [ 28.828] (II) intel(0): Printing DDC gathered Modelines: [ 28.828] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1320 768 771 777 803 -hsync -vsync (49.2 kHz e) [ 28.828] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 30.267] (II) intel(0): EDID vendor "TNJ", prod id 7341 [ 30.267] (II) intel(0): Printing DDC gathered Modelines: [ 30.267] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1320 768 771 777 803 -hsync -vsync (49.2 kHz e) [ 30.267] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 30.805] (II) intel(0): EDID vendor "TNJ", prod id 7341 [ 30.805] (II) intel(0): Printing DDC gathered Modelines: [ 30.805] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1320 768 771 777 803 -hsync -vsync (49.2 kHz e) [ 30.805] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 31.073] (II) XKB: generating xkmfile /var/lib/xkb/server-8C3648A5FD728529D869F46730BE1BC287DB231C.xkm [ 32.591] (II) intel(0): EDID vendor "TNJ", prod id 7341 [ 32.591] (II) intel(0): Printing DDC gathered Modelines: [ 32.591] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1320 768 771 777 803 -hsync -vsync (49.2 kHz e) [ 32.591] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 32.911] (II) intel(0): EDID vendor "TNJ", prod id 7341 [ 32.911] (II) intel(0): Printing DDC gathered Modelines: [ 32.911] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1320 768 771 777 803 -hsync -vsync (49.2 kHz e) [ 32.911] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 33.231] (II) intel(0): EDID vendor "TNJ", prod id 7341 [ 33.231] (II) intel(0): Printing DDC gathered Modelines: [ 33.231] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1320 768 771 777 803 -hsync -vsync (49.2 kHz e) [ 33.231] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 33.512] (II) intel(0): EDID vendor "TNJ", prod id 7341 [ 33.513] (II) intel(0): Printing DDC gathered Modelines: [ 33.513] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1320 768 771 777 803 -hsync -vsync (49.2 kHz e) [ 33.513] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 33.773] (II) intel(0): EDID vendor "TNJ", prod id 7341 [ 33.773] (II) intel(0): Printing DDC gathered Modelines: [ 33.773] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1320 768 771 777 803 -hsync -vsync (49.2 kHz e) [ 33.773] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 34.106] (II) intel(0): EDID vendor "TNJ", prod id 7341 [ 34.106] (II) intel(0): Printing DDC gathered Modelines: [ 34.106] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1320 768 771 777 803 -hsync -vsync (49.2 kHz e) [ 34.106] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 124.675] (II) XKB: reuse xkmfile /var/lib/xkb/server-84ECF497EADF71C2FD0935BC9EAE9D05FFD01B7E.xkm