[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-3531) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Wed Mar 13 00:32:22 PDT 2019 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] Found tegra_fbmem: 00180000@92cb6000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 23 pages/cpu @ffffffc0fefd2000 s53400 r8192 d32616 u94208 [ 0.000000] pcpu-alloc: s53400 r8192 d32616 u94208 alloc=23*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,2 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000 tegra_fbmem=0x180000@0x92cb6000 is_hdmi_initialised=1 root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 rootfstype=ext4 root=/dev/mmcblk0p1 rw rootwait [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29384(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3574528K/4159488K available (15166K kernel code, 2914K rwdata, 6616K rodata, 8512K init, 605K bss, 109824K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f50000 ( 15168 KB) [ 0.000000] .rodata : 0xffffff8008f50000 - 0xffffff80095d0000 ( 6656 KB) [ 0.000000] .init : 0xffffff80095d0000 - 0xffffff8009e20000 ( 8512 KB) [ 0.000000] .data : 0xffffff8009e20000 - 0xffffff800a0f8808 ( 2915 KB) [ 0.000000] .bss : 0xffffff800a0f8808 - 0xffffff800a18fe3c ( 606 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] boot misc1 0x90000000: expected 0x10000000 [ 0.000000] (comparison mask = 0xf8000000) [ 0.000000] boot misc2 0x0: expected 0xf6e0f620 [ 0.000000] (comparison mask = 0xffffffff) [ 0.000000] boot misc3 0xf253: expected 0x10000 [ 0.000000] (comparison mask = 0xffffffff) [ 0.000000] PLL_D2 already enabled. Postponing set full defaults [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001427] Console: colour dummy device 80x25 [ 0.002358] console [tty0] enabled [ 0.002383] kmemleak: Kernel memory leak detector disabled [ 0.002412] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.002440] pid_max: default: 32768 minimum: 301 [ 0.002898] Security Framework initialized [ 0.003131] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003150] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.004347] ftrace: allocating 46802 entries in 183 pages [ 0.176104] sched-energy: CPU device node has no sched-energy-costs [ 0.176134] ASID allocator initialised with 65536 entries [ 0.215279] tegra-id: chipid=22117. [ 0.215322] tegra-id: opt_subrevision=0. [ 0.215351] Tegra Speedo/IDDQ fuse revision 4 [ 0.215365] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.215381] Tegra: CPU Process ID 0, SoC Process ID 0, GPU Process ID 0 [ 0.215397] Tegra: CPU Speedo Value 2010, SoC Speedo Value 1905, GPU Speedo Value 2020 [ 0.215418] Tegra: CPU IDDQ Value 1564, SoC IDDQ Value 1744, GPU IDDQ Value 2100 [ 0.215453] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 0 [ 0.215480] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-a02.dts [ 0.215515] DTB Build time: Mar 15 2019 09:52:07 [ 0.265067] CPU1: Booted secondary processor [411fd071] [ 0.296966] CPU2: Booted secondary processor [411fd071] [ 0.328972] CPU3: Booted secondary processor [411fd071] [ 0.329062] Brought up 4 CPUs [ 0.329124] SMP: Total of 4 processors activated. [ 0.329141] CPU features: detected feature: 32-bit EL0 Support [ 0.329420] CPU: All CPU(s) started at EL2 [ 0.329450] alternatives: patching kernel code [ 0.337489] devtmpfs: initialized [ 0.372071] Initilizing CustomIPI irq domain [ 0.372483] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.372532] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.383173] pinctrl core: initialized pinctrl subsystem [ 0.383802] OS set in device tree is not L4T. [ 0.384219] regulator-dummy: no parameters [ 0.384513] Initializing plugin-manager [ 0.384667] Plugin module not found [ 0.384883] node /plugin-manager/fragement@0 match with board >=3448-0000-100 [ 0.385448] node /plugin-manager/fragment@1 match with board >=3448-0000-101 [ 0.386198] node /plugin-manager/fragment@5 match with board 3449-0000-200 [ 0.389513] NET: Registered protocol family 16 [ 0.390847] pstore: using zlib compression [ 0.391526] console [pstore-1] enabled [ 0.391542] pstore: Registered ramoops as persistent store backend [ 0.391561] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.405088] cpuidle: using governor menu [ 0.408925] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.410477] vdso: 2 pages (1 code @ ffffff8008f57000, 1 data @ ffffff8009e24000) [ 0.410523] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.413496] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.414967] tegra_bpmp_of_clk_init: EMC proxy not found. [ 0.415923] tegra_powergate_init: DONE [ 0.415962] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-a02.dts [ 0.416000] DTB Build time: Mar 15 2019 09:52:07 [ 0.417654] Tegra reboot handler registered. [ 0.422040] iommu: Adding device tegra-carveouts to group 0 [ 0.422210] platform tegra-carveouts: domain=ffffffc0f9404318 allocates as[0]=ffffffc0f9bf00a8 [ 0.422583] iommu: Adding device smmu_test to group 1 [ 0.422648] platform smmu_test: domain=ffffffc0f9404558 allocates as[0]=ffffffc0f9bf0110 [ 0.423498] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000 [ 0.423574] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000 [ 0.423648] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000 [ 0.423671] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.423709] mc-err: mcerr ops are set to t21x [ 0.433266] iommu: Adding device 70090000.xusb to group 2 [ 0.433605] iommu: Adding device 70006000.serial to group 3 [ 0.433686] platform 70006000.serial: domain=ffffffc0f940cc18 allocates as[0]=ffffffc0f9bf0178 [ 0.434122] iommu: Adding device 70006040.serial to group 4 [ 0.434388] iommu: Adding device 70006200.serial to group 5 [ 0.434592] iommu: Adding device sound to group 6 [ 0.434657] platform sound: domain=ffffffc0f9479198 allocates as[0]=ffffffc0f9bf01e0 [ 0.435235] iommu: Adding device 7000d400.spi to group 7 [ 0.435519] iommu: Adding device 7000d600.spi to group 8 [ 0.435839] iommu: Adding device 70410000.spi to group 9 [ 0.436154] iommu: Adding device 50000000.host1x to group 10 [ 0.436455] iommu: Adding device 54080000.vi to group 11 [ 0.436861] iommu: Adding device 54600000.isp to group 12 [ 0.437167] iommu: Adding device 54680000.isp to group 13 [ 0.437477] iommu: Adding device tegradc.0 to group 14 [ 0.437541] platform tegradc.0: domain=ffffffc0f94860d8 allocates as[0]=ffffffc0f9bf0248 [ 0.439188] platform tegradc.0: IOVA linear map 0x0000000092cb6000(180000) [ 0.439594] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.439950] iommu: Adding device tegradc.1 to group 15 [ 0.440013] platform tegradc.1: domain=ffffffc0f9486318 allocates as[0]=ffffffc0f9bf02b0 [ 0.441681] platform tegradc.1: IOVA linear map 0x0000000092cb6000(180000) [ 0.442091] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.442399] iommu: Adding device 54340000.vic to group 16 [ 0.442620] iommu: Adding device 544c0000.nvenc to group 17 [ 0.442827] iommu: Adding device 54500000.tsec to group 18 [ 0.443042] iommu: Adding device 54100000.tsecb to group 19 [ 0.443259] iommu: Adding device 54480000.nvdec to group 20 [ 0.443466] iommu: Adding device 54380000.nvjpg to group 21 [ 0.444522] iommu: Adding device 546c0000.i2c to group 22 [ 0.444871] iommu: Adding device 57000000.gpu to group 23 [ 0.444939] platform 57000000.gpu: domain=ffffffc0f94f9318 allocates as[0]=ffffffc0f9bf0318 [ 0.445019] platform 57000000.gpu: domain=ffffffc0f94f9318 allocates as[1]=ffffffc0f9bf0380 [ 0.445098] platform 57000000.gpu: domain=ffffffc0f94f9318 allocates as[2]=ffffffc0f9bf03e8 [ 0.445152] platform 57000000.gpu: domain=ffffffc0f94f9318 allocates as[3]=ffffffc0f9bf0450 [ 0.446023] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.446065] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.446092] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.446113] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.446130] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.497263] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.497300] tegra-pmc: Clear bootloader IO dpd settings [ 0.497335] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.497415] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.497744] iommu: Adding device 70012000.se to group 24 [ 0.498635] iommu: Adding device 7000c000.i2c to group 25 [ 0.498971] iommu: Adding device 7000c400.i2c to group 26 [ 0.499293] iommu: Adding device 7000c500.i2c to group 27 [ 0.499609] iommu: Adding device 7000c700.i2c to group 28 [ 0.499956] iommu: Adding device 7000d000.i2c to group 29 [ 0.500287] iommu: Adding device 7000d100.i2c to group 30 [ 0.500596] iommu: Adding device sdhci-tegra.0 to group 31 [ 0.500667] platform sdhci-tegra.0: domain=ffffffc0f9508498 allocates as[0]=ffffffc0f9bf04b8 [ 0.501736] iommu: Adding device 700d0000.xudc to group 32 [ 0.507659] vdd-ac-bat: 5000 mV [ 0.508146] vdd-5v0-sys: 5000 mV [ 0.509310] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.509373] vdd-5v0-hdmi: 5000 mV [ 0.509931] vdd-1v8: 1800 mV [ 0.510498] vdd-fan: supplied by vdd-5v0-sys [ 0.510557] vdd-fan: 5000 mV [ 0.511055] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.511106] vdd-usb-vbus: 5000 mV [ 0.511687] vdd-usb-vbus2: 5000 mV [ 0.542256] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.544864] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.545380] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.553418] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.553789] SCSI subsystem initialized [ 0.554036] libata version 3.00 loaded. [ 0.554340] usbcore: registered new interface driver usbfs [ 0.554410] usbcore: registered new interface driver hub [ 0.554505] usbcore: registered new device driver usb [ 0.558564] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.560158] random: fast init done [ 0.565131] vdd-core: 600 <--> 1162 mV at 1125 mV [ 0.566394] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.568992] vdd-ddr-1v1: 1150 mV [ 0.572983] vdd-pre-reg-1v35: 1350 mV [ 0.576985] vdd-1v8: 1800 mV [ 0.577260] vdd-1v8: Failed to create debugfs directory [ 0.580986] avdd-sys-1v2: 1200 mV [ 0.584982] vdd-pex-1v0: 1050 mV [ 0.585757] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.586402] max77620-ldo3: at 3100 mV [ 0.588988] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.589640] max77620-ldo5: at 3100 mV [ 0.590307] max77620-ldo6: at 2800 mV [ 0.592983] avdd-1v05-pll: 1050 mV [ 0.596987] avdd-io-hdmi-dp: 1050 mV [ 0.598490] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.598789] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.600866] max77620 4-003c: max77620 probe successful [ 0.603068] i2c i2c-6: Unbalanced pm_runtime_enable! [ 0.603600] media: Linux media interface: v0.10 [ 0.603668] Linux video capture interface: v2.00 [ 0.604606] pps_core: LinuxPPS API ver. 1 registered [ 0.604634] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.604684] PTP clock support registered [ 0.608151] tegra_fiq_debugger_init: found FIQ source (IRQ 98) [ 0.614436] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.615316] Advanced Linux Sound Architecture Driver Initialized. [ 0.616000] Bluetooth: Core ver 2.22 [ 0.616068] NET: Registered protocol family 31 [ 0.616086] Bluetooth: HCI device and connection manager initialized [ 0.616114] Bluetooth: HCI socket layer initialized [ 0.616134] Bluetooth: L2CAP socket layer initialized [ 0.616169] Bluetooth: SCO socket layer initialized [ 0.618067] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.618104] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.618162] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.618189] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.620828] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.622170] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.622286] vdd-3v3-sys: 3300 mV [ 0.622571] vdd-1v8: supplied by vdd-3v3-sys [ 0.625148] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.625637] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.625685] vdd-3v3-sd: 3300 mV [ 0.626851] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.626910] avdd-io-edp-1v05: 1050 mV [ 0.627394] vdd-usb-hub-en: supplied by vdd-1v8 [ 0.627445] vdd-usb-hub-en: 5000 mV [ 0.628823] camchar: rtcpu character device driver loaded [ 0.629577] extcon-gpio-states extcon:extcon@1: Cable state:1, cable id:1 [ 0.630978] clocksource: Switched to clocksource arch_sys_counter [ 0.670600] VFS: Disk quotas dquot_6.6.0 [ 0.670767] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.671324] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.671778] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.671827] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.672042] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.672067] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.672095] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.672142] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.672167] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.672202] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.672223] nvmap_page_pool_init: Total RAM pages: 1012416 [ 0.672241] nvmap_page_pool_init: nvmap page pool size: 126552 pages (494 MB) [ 0.672376] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.672801] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.673763] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.681767] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.682174] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.682447] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.682678] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.682892] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.683220] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.683242] pre_t19x_iso_plat_init(): max_iso_bw=33280000KB [ 0.683697] NET: Registered protocol family 2 [ 0.684719] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.684955] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.685471] TCP: Hash tables configured (established 32768 bind 32768) [ 0.685639] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.685736] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.686145] NET: Registered protocol family 1 [ 0.686884] RPC: Registered named UNIX socket transport module. [ 0.686911] RPC: Registered udp transport module. [ 0.686928] RPC: Registered tcp transport module. [ 0.686944] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.687037] PCI: CLS 0 bytes, default 64 [ 0.687270] Trying to unpack rootfs image as initramfs... [ 0.696663] host1x 50000000.host1x: initialized [ 0.698450] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.701868] audit: initializing netlink subsys (disabled) [ 0.701995] audit: type=2000 audit(0.551:1): initialized [ 0.702754] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.712861] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.714382] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.715232] 9p: Installing v9fs 9p2000 file system support [ 0.718477] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.718637] io scheduler noop registered [ 0.718943] io scheduler cfq registered (default) [ 0.721661] gic 702f9000.agic: GIC IRQ controller registered [ 0.725035] iommu: Adding device 702ef000.adsp to group 33 [ 0.731943] iommu: Adding device aconnect@702c0000:adsp_audio to group 34 [ 0.732139] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 0.732767] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x81e740f [ 0.732797] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 0.734406] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 0.734545] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 0.734664] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 0.734880] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 0.735032] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 0.735151] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 0.735258] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 0.735375] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 0.735482] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 0.735599] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 0.741741] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 0.743177] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 0.745070] tegra-pcie 1003000.pcie-controller: 4x1, 1x1 configuration [ 0.746369] tegra-pcie 1003000.pcie-controller: PCIE: Enable power rails [ 0.746735] tegra-pcie 1003000.pcie-controller: probing port 0, using 4 lanes [ 0.747945] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.748197] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=750000, max_bw=1500000 [ 0.748456] Adding domain tsec-pd to PM domain host1x-pd [ 0.750438] tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes [ 0.751390] tsec 54500000.tsec: initialized [ 0.753099] tsec 54100000.tsecb: initialized [ 0.753794] Adding domain nvdec-pd to PM domain host1x-pd [ 0.756866] nvdec 54480000.nvdec: initialized [ 0.757950] Adding domain vic03-pd to PM domain host1x-pd [ 0.758154] Adding domain msenc-pd to PM domain host1x-pd [ 0.758335] Adding domain nvjpg-pd to PM domain host1x-pd [ 0.761803] falcon 54340000.vic: initialized [ 0.763082] falcon 544c0000.nvenc: initialized [ 0.764476] falcon 54380000.nvjpg: initialized [ 0.769015] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 0.769138] display board info: id 0x0, fab 0x0 [ 0.769213] generic_infoframe_type: 0x87 [ 0.769355] tegradc tegradc.0: DT parsed successfully [ 0.769420] tegradc tegradc.0: Display dc.ffffff800ab40000 registered with id=0 [ 0.770093] tegradc tegradc.0: Bootloader disp_param detected. Detected mode: 720x480 (on 0x0mm) pclk=26972968 [ 0.773446] tegradc tegradc.0: probed [ 0.776751] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.781559] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 10 channels [ 0.782497] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 0.782873] kfuse 7000fc00.kfuse: initialized [ 0.784426] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 0.785494] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 0.786861] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 0.786910] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 0.787478] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 0.789239] vdd-gpu: applied init 1000000uV constraint [ 0.789272] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 0.789685] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 0.794468] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.794643] No Device Node present for smmu client: serial8250 !! [ 0.794676] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 0.794765] iommu: Adding device serial8250 to group 35 [ 0.798221] console [ttyS0] disabled [ 0.798380] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 1.274423] tegra-pcie 1003000.pcie-controller: link 0 down, retrying [ 1.678760] tegra-pcie 1003000.pcie-controller: link 0 down, retrying [ 2.083090] tegra-pcie 1003000.pcie-controller: link 0 down, retrying [ 2.085107] tegra-pcie 1003000.pcie-controller: link 0 down, ignoring [ 2.085530] tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00 [ 2.085538] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.085543] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.085547] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.085552] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.085597] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 2.085722] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.085959] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.086139] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 2.086176] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 2.086220] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 2.086250] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 2.086445] pci 0000:01:00.0: supports D1 D2 [ 2.086449] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.099101] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.099154] pci 0000:00:02.0: BAR 14: assigned [mem 0x13000000-0x130fffff] [ 2.099160] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.099169] pci 0000:01:00.0: BAR 4: assigned [mem 0x13000000-0x13003fff 64bit] [ 2.099195] pci 0000:01:00.0: BAR 2: assigned [mem 0x13004000-0x13004fff 64bit] [ 2.099218] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.099229] pci 0000:00:02.0: PCI bridge to [bus 01] [ 2.099235] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 2.099242] pci 0000:00:02.0: bridge window [mem 0x13000000-0x130fffff] [ 2.100006] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 2.100011] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.100019] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 2.100148] aer 0000:00:02.0:pcie002: service driver aer loaded [ 3.211876] console [ttyS0] enabled [ 3.212251] Console: switching to colour frame buffer device 90x30 [ 3.216239] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 3.216558] serial-tegra 70006200.serial: RX in PIO mode [ 3.216644] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 3.217537] [drm] Initialized [ 3.248852] tegradc tegradc.0: fb registered [ 3.252000] brd: module loaded [ 3.258254] loop: module loaded [ 3.261617] tegra_profiler: version: 1.132, samples/io: 46/26 [ 3.265171] tegradc tegradc.0: DC initialized, skipping tegra_dc_program_mode. [ 3.265213] tegradc tegradc.0: hdmi: tmds rate:27000K prod-setting:prod_c_hdmi_0m_54m [ 3.265691] tegradc tegradc.0: hdmi: get RGB quant from REG programmed by BL. [ 3.265701] tegradc tegradc.0: hdmi: get YCC quant from REG programmed by BL. [ 3.266025] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 3.266027] Extcon AUX1(HDMI) enable [ 3.266884] tegradc tegradc.1: disp1 connected to head1->/host1x/sor [ 3.266999] tegradc tegradc.1: No lt-data, using default setting [ 3.267024] tegradc tegradc.1: No hpd-gpio in DT [ 3.267056] tegradc tegradc.1: DT parsed successfully [ 3.267108] tegradc tegradc.1: Display dc.ffffff800f4c0000 registered with id=1 [ 3.267921] edid invalid [ 3.268492] tegradc tegradc.1: dpd enable lookup fail:-19 [ 3.272833] tegradc tegradc.1: probed [ 3.295716] tegradc tegradc.0: nominal-pclk:27000000 parent:26972968 div:1.0 pclk:26972968 26730000~29430000 [ 3.357356] tegradc tegradc.1: fb registered [ 3.357502] tegra_profiler: auth: init [ 3.358915] THERMAL EST: found 2 subdevs [ 3.358920] THERMAL EST num_resources: 0 [ 3.358926] [THERMAL EST subdev 0] [ 3.358933] [THERMAL EST subdev 1] [ 3.359429] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 3.359431] THERMAL EST: thz register success. [ 3.359624] THERMAL EST: end of probe, return err: 0 [ 3.360832] hisi_sas: driver version v1.6 [ 3.364911] tegra-qspi 70410000.spi: Prod settings list not found [ 3.373428] qspi_mtd spi32766.0: MX25U3235F (4096 Kbytes) [ 3.373436] qspi_mtd spi32766.0: mtd .name = spi32766.0, .size = 0x400000 (4MiB) .erasesize = 0x00001000 (4KiB) .numeraseregions = 0 [ 3.379801] libphy: Fixed MDIO Bus: probed [ 3.380386] tun: Universal TUN/TAP device driver, 1.6 [ 3.380388] tun: (C) 1999-2004 Max Krasnyansky [ 3.381437] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.381441] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.381496] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 3.381498] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.381547] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 3.381549] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 3.381597] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 3.381599] Copyright(c) 1999 - 2017 Intel Corporation. [ 3.382513] r8168 0000:01:00.0: enabling device (0000 -> 0003) [ 3.382549] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 3.396758] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 3.396910] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:e6:22:d1 from device tree [ 3.397499] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 3.397536] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 3.398137] PPP generic driver version 2.4.2 [ 3.398349] PPP BSD Compression module registered [ 3.398355] PPP Deflate Compression module registered [ 3.398397] PPP MPPE Compression module registered [ 3.398404] NET: Registered protocol family 24 [ 3.398479] usbcore: registered new interface driver r8152 [ 3.398524] usbcore: registered new interface driver asix [ 3.398596] usbcore: registered new interface driver ax88179_178a [ 3.398634] usbcore: registered new interface driver cdc_ether [ 3.398664] usbcore: registered new interface driver net1080 [ 3.398695] usbcore: registered new interface driver cdc_subset [ 3.398725] usbcore: registered new interface driver zaurus [ 3.398786] usbcore: registered new interface driver cdc_ncm [ 3.399010] VFIO - User Level meta-driver version: 0.3 [ 3.400315] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.400337] ehci-pci: EHCI PCI platform driver [ 3.400384] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.400397] ohci-pci: OHCI PCI platform driver [ 3.400439] ohci-platform: OHCI generic platform driver [ 3.403576] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 3.404178] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 3.405363] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f971d400 id [ 3.405464] tegra-xusb 70090000.xusb: Direct firmware load for tegra21x_xusb_firmware failed with error -2 [ 3.405467] tegra-xusb 70090000.xusb: Falling back to user helper [ 3.406771] usbcore: registered new interface driver uas [ 3.406833] usbcore: registered new interface driver usb-storage [ 3.406949] usbcore: registered new interface driver usbserial [ 3.410018] tegra-xudc-new 700d0000.xudc: device count: 1 [ 3.411397] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 3.411409] tegra-xudc-new 700d0000.xudc: vbus state: 1 [ 3.411425] tegra-xudc-new 700d0000.xudc: device mode on: 0 [ 3.411447] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 0 [ 3.411467] tegra-xudc-new 700d0000.xudc: active: 0 => 1 [ 3.412123] mousedev: PS/2 mouse device common for all mice [ 3.412203] usbcore: registered new interface driver xpad [ 3.655341] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 3.667934] rtc rtc1: alarm rtc device [ 3.667949] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 3.667995] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 3.668543] i2c /dev entries driver [ 3.670138] imx219 6-0010: tegracam sensor driver:imx219_v2.0.6 [ 3.699794] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 3.699865] imx219 6-0010: imx219_board_setup: error during i2c read probe (-121) [ 3.699893] imx219 6-0010: board setup failed [ 3.699983] imx219: probe of 6-0010 failed with error -121 [ 3.705938] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 3.746901] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 3.746906] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 3.747380] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.747394] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 3.747404] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 3.747538] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.747546] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 3.747552] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 3.747693] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.747704] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 3.747709] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 3.747884] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 3.748700] tegra_aotag tegra-aotag: Registering sensor 0 [ 3.748753] tegra_aotag tegra-aotag: Invalid temp readout [ 3.748776] tegra_aotag tegra-aotag: Invalid temp readout [ 3.748792] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 3.748800] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 3.749863] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.749880] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 3.750099] tegra_aotag tegra-aotag: Invalid temp readout [ 3.750127] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 3.750550] parse_throttle_dt_data: Num cap clks = 6 [ 3.750556] parse_throttle_dt_data: clk=cclk_g type=2 [ 3.750569] parse_throttle_dt_data: clk=gpu type=4 [ 3.750595] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 3.750615] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 3.750636] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 3.750640] parse_throttle_dt_data: clk=emc type=3 [ 3.752973] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.753116] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.753292] tegra_throttle_probe: probe successful. #cdevs=4 [ 3.754093] FAN dev name: pwm-fan [ 3.754148] FAN:gpio request success. [ 3.754221] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 3.754523] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 3.754714] pwm_fan_driver pwm-fan: fan tach request irq success [ 3.754725] pwm_fan_driver pwm-fan: tach period: 1000 [ 3.754827] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 3.754832] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 3.754836] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 3.754840] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 3.754844] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 3.754848] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 3.754851] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 3.754855] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 3.754859] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 3.754863] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 3.755581] tegra-wdt 60005100.watchdog: Tegra WDT enabled on probe. Timeout = 120 seconds. [ 3.756043] tegra-wdt 60005100.watchdog: initialized (timeout = 120 sec, nowayout = 1) [ 3.756951] device-mapper: uevent: version 1.0.3 [ 3.757447] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 3.762700] tegra210-cpufreq cpufreq: probe()...completed [ 3.763511] sdhci: Secure Digital Host Controller Interface driver [ 3.763512] sdhci: Copyright(c) Pierre Ossman [ 3.763513] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.764002] sdhci-tegra sdhci-tegra.0: Got CD GPIO [ 3.764352] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful [ 3.764473] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 300 [ 3.768332] tegra-se 70012000.se: tegra_se_probe: complete [ 3.768860] hidraw: raw HID events driver (C) Jiri Kosina [ 3.770842] usbcore: registered new interface driver usbhid [ 3.770843] usbhid: USB HID core driver [ 3.794665] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 3.794892] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 3.796618] nvpmodel: initialized successfully [ 3.797598] usbcore: registered new interface driver snd-usb-audio [ 3.797655] No Device Node present for smmu client: snd-soc-dummy !! [ 3.797659] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 3.797677] iommu: Adding device snd-soc-dummy to group 36 [ 3.811109] mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr [ 3.827940] OPE platform probe [ 3.828023] OPE platform probe successful [ 3.828405] OPE platform probe [ 3.828488] OPE platform probe successful [ 3.853318] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 3.853447] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 3.853573] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 3.853698] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 3.853819] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 3.853947] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 3.854067] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 3.854188] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 3.854310] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 3.854439] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 3.866885] u32 classifier [ 3.866886] Actions configured [ 3.866978] Initializing XFRM netlink socket [ 3.867711] NET: Registered protocol family 10 [ 3.868443] NET: Registered protocol family 17 [ 3.868453] NET: Registered protocol family 15 [ 3.868527] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.868572] Bluetooth: RFCOMM socket layer initialized [ 3.868579] Bluetooth: RFCOMM ver 1.11 [ 3.868583] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.868587] Bluetooth: HIDP socket layer initialized [ 3.868605] 9pnet: Installing 9P2000 support [ 3.868642] Key type dns_resolver registered [ 3.875396] Registered cp15_barrier emulation handler [ 3.875458] Registered setend emulation handler [ 3.876551] registered taskstats version 1 [ 3.877128] Adding domain ve2-pd to PM domain host1x-pd [ 3.877370] Adding domain ve-pd to PM domain host1x-pd [ 4.472345] tegradc tegradc.0: blank - powerdown [ 4.474067] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 4.475419] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 4.475421] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 4.475426] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 4.483239] isp 54600000.isp: initialized [ 4.484276] isp 54680000.isp: initialized [ 4.496142] clk_cbus_recalc_rate: no gbus parent [ 4.496147] clk_cbus_round_rate: no gbus parent [ 4.496148] clk_cbus_round_rate: no gbus parent [ 4.496172] clk_cbus_recalc_rate: no gbus parent [ 4.496277] clk_cbus_recalc_rate: no gbus parent [ 4.496280] clk_cbus_round_rate: no gbus parent [ 4.496281] clk_cbus_round_rate: no gbus parent [ 4.496284] clk_cbus_recalc_rate: no gbus parent [ 4.496961] tegra_dvfs: GPU-cap: registered [ 4.497015] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 4.497017] tegra dvfs: vdd-core: nominal 1125mV, offset 600000uV, step 12500uV, scaling enabled [ 4.497018] tegra dvfs: vdd-gpu: nominal 1078mV, offset 708000uV, step 10000uV, scaling enabled [ 4.499093] tegra_dvfs: vdd-gpu-vts: registered [ 4.500214] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 4.500860] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 4.501391] input: gpio-keys as /devices/gpio-keys/input/input1 [ 4.520829] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 4.520831] Extcon AUX1(HDMI) disable [ 4.531850] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 4.532780] vi 54080000.vi: vi_probe: ++ [ 4.536909] vi 54080000.vi: initialized [ 4.539210] vi 54080000.vi: subdev nvcsi--1 bound [ 4.540563] Disable partitions left on by BL [ 4.540566] disb [ 4.540610] bwmgr: missing cdev-type property [ 4.540734] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.540739] DRAM derating cdev registered. [ 4.542039] vdd-1v8: disabling [ 4.542041] vdd-fan: disabling [ 4.542043] vdd-usb-vbus: disabling [ 4.542044] vdd-usb-vbus2: disabling [ 4.542053] avdd-io-edp-1v05: disabling [ 4.542055] vdd-usb-hub-en: disabling [ 4.542261] ALSA device list: [ 4.542264] #0: tegra-hda at 0x70038000 irq 83 [ 4.542265] #1: tegra-snd-t210ref-mobile-rt565x [ 4.566285] tegradc tegradc.0: unblank [ 4.628367] tegradc tegradc.0: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000 [ 4.628418] tegradc tegradc.0: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_75m_150m [ 4.635044] tegradc tegradc.0: hdmi: get RGB quant from EDID. [ 4.635050] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 4.638275] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 4.638276] Extcon AUX1(HDMI) enable [ 4.638588] tegradc tegradc.0: sync windows ret = 250 [ 4.992011] mmc0: hw tuning done ... [ 4.992042] mmc0: new ultra high speed SDR104 SDXC card at address 0001 [ 5.004692] mmcblk0: mmc0:0001 ED4QT 119 GiB [ 5.025221] tegradc tegradc.1: blank - powerdown [ 5.031720] extcon-disp-state extcon:disp-state: cable 44 state 0 already set. [ 5.031725] Extcon DP: HPD disabled [ 5.031727] hpd: hpd_switch 0 [ 5.031729] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 5.031742] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 5.031747] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 5.053186] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 5.083562] extcon-disp-state extcon:disp-state: cable 40 state 1 [ 5.083563] Extcon HDMI: HPD enabled [ 5.083576] tegradc tegradc.0: hdmi: plugged [ 5.129118] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 5.139084] VFS: Mounted root (ext4 filesystem) on device 179:1. [ 5.150913] devtmpfs: mounted [ 5.158651] Freeing unused kernel memory: 8512K [ 5.352961] systemd[1]: System time before build time, advancing clock. [ 5.392135] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.411957] cgroup: cgroup2: unknown option "nsdelegate" [ 5.431606] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 5.457732] systemd[1]: Detected architecture arm64. [ 5.499775] systemd[1]: Set hostname to . [ 5.599813] systemd[1]: File /lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 5.619312] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 5.801345] random: systemd: uninitialized urandom read (16 bytes read) [ 5.811986] systemd[1]: Created slice User and Session Slice. [ 5.822590] random: systemd: uninitialized urandom read (16 bytes read) [ 5.832336] systemd[1]: Created slice System Slice. [ 5.841856] random: systemd: uninitialized urandom read (16 bytes read) [ 5.850903] systemd[1]: Listening on fsck to fsckd communication Socket. [ 5.862219] systemd[1]: Reached target Slices. [ 5.871385] systemd[1]: Listening on RPCbind Server Activation Socket. [ 5.931109] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 6.024740] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 6.548718] Adding 6291452k swap on /mnt/swapfile. Priority:-1 extents:9 across:7405564k SS [ 6.573160] systemd-journald[1979]: Received request to flush runtime journal from PID 1 [ 7.265943] tegra-xusb 70090000.xusb: cannot find firmware....retry after 1 second [ 7.483721] using random self ethernet address [ 7.483726] using random host ethernet address [ 7.503628] random: crng init done [ 7.503633] random: 7 urandom warning(s) missed due to ratelimiting [ 7.770496] nvs_dsm nvs_dsm: dsm_probe [ 7.770521] nvs_dsm nvs_dsm: dsm_remove [ 7.770524] nvs_dsm nvs_dsm: dsm_probe done [ 7.776329] Mass Storage Function, version: 2009/09/11 [ 7.776335] LUN: removable file: (no medium) [ 7.781797] using random self ethernet address [ 7.781802] using random host ethernet address [ 7.791384] rndis0: HOST MAC 02:bd:8f:90:88:48 [ 7.791442] rndis0: MAC 02:bd:8f:90:88:49 [ 7.794220] usb0: HOST MAC 02:bd:8f:90:88:4a [ 7.794249] usb0: MAC 02:bd:8f:90:88:4b [ 7.794279] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 7.978786] l4tbr0: port 1(rndis0) entered blocking state [ 7.978791] l4tbr0: port 1(rndis0) entered disabled state [ 7.978937] device rndis0 entered promiscuous mode [ 7.986136] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 8.001726] l4tbr0: port 2(usb0) entered blocking state [ 8.001730] l4tbr0: port 2(usb0) entered disabled state [ 8.004811] device usb0 entered promiscuous mode [ 8.009641] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 8.009648] l4tbr0: port 2(usb0) entered blocking state [ 8.009651] l4tbr0: port 2(usb0) entered forwarding state [ 8.819316] l4tbr0: port 2(usb0) entered disabled state [ 11.922206] tegra-xusb 70090000.xusb: Firmware timestamp: 2017-11-03 13:36:19 UTC, Version: 50.20 release [ 11.922245] tegra-xusb 70090000.xusb: xHCI Host Controller [ 11.922262] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 11.923145] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 11.923178] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 11.923305] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 11.923309] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.923312] usb usb1: Product: xHCI Host Controller [ 11.923314] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 11.923316] usb usb1: SerialNumber: 70090000.xusb [ 11.923721] hub 1-0:1.0: USB hub found [ 11.923786] hub 1-0:1.0: 5 ports detected [ 11.924174] tegra-xusb 70090000.xusb: xHCI Host Controller [ 11.924183] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 11.924249] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 11.924319] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 11.924323] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.924325] usb usb2: Product: xHCI Host Controller [ 11.924328] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 11.924330] usb usb2: SerialNumber: 70090000.xusb [ 11.924720] hub 2-0:1.0: USB hub found [ 11.924745] hub 2-0:1.0: 4 ports detected [ 12.027097] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 12.027337] usb usb2: usb_suspend_both: status 0 [ 12.254995] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 12.291655] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411 [ 12.291661] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 12.291666] usb 1-2: Product: 4-Port USB 2.1 Hub [ 12.291669] usb 1-2: Manufacturer: Generic [ 12.292964] hub 1-2:1.0: USB hub found [ 12.295096] hub 1-2:1.0: 4 ports detected [ 12.400635] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb [ 12.439426] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411 [ 12.439470] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 12.439501] usb 2-1: Product: 4-Port USB 3.1 Hub [ 12.439532] usb 2-1: Manufacturer: Generic [ 12.449003] hub 2-1:1.0: USB hub found [ 12.450486] hub 2-1:1.0: 4 ports detected [ 12.583524] usb 1-2.2: new low-speed USB device number 3 using tegra-xusb [ 12.611644] usb 1-2.2: New USB device found, idVendor=275d, idProduct=0ba6 [ 12.611687] usb 1-2.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 12.611719] usb 1-2.2: Product: USB OPTICAL MOUSE [ 12.615183] usb 2-1: usb_suspend_both: status 0 [ 12.615381] usb usb2: usb_suspend_both: status 0 [ 12.617331] input: USB OPTICAL MOUSE as /devices/70090000.xusb/usb1/1-2/1-2.2/1-2.2:1.0/0003:275D:0BA6.0001/input/input2 [ 12.618141] hid-generic 0003:275D:0BA6.0001: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE ] on usb-70090000.xusb-2.2/input0 [ 12.927500] usb 1-2.4: new low-speed USB device number 4 using tegra-xusb [ 12.954833] usb 1-2.4: New USB device found, idVendor=1a2c, idProduct=2d23 [ 12.954874] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 12.954903] usb 1-2.4: Product: USB Keyboard [ 12.954928] usb 1-2.4: Manufacturer: USB [ 12.962439] input: USB USB Keyboard as /devices/70090000.xusb/usb1/1-2/1-2.4/1-2.4:1.0/0003:1A2C:2D23.0002/input/input3 [ 13.022924] hid-generic 0003:1A2C:2D23.0002: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keyboard] on usb-70090000.xusb-2.4/input0 [ 13.026760] input: USB USB Keyboard as /devices/70090000.xusb/usb1/1-2/1-2.4/1-2.4:1.1/0003:1A2C:2D23.0003/input/input4 [ 13.086722] hid-generic 0003:1A2C:2D23.0003: input,hidraw2: USB HID v1.10 Device [USB USB Keyboard] on usb-70090000.xusb-2.4/input1 [ 16.130824] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.132082] eth0: 0xffffff800a35e000, 00:04:4b:e6:22:d1, IRQ 404 [ 16.184282] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.936915] tegradc tegradc.0: blank - powerdown [ 18.005522] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 18.005524] Extcon AUX1(HDMI) disable [ 18.022508] tegradc tegradc.0: unblank [ 18.034435] tegradc tegradc.0: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000 [ 18.034513] tegradc tegradc.0: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_75m_150m [ 18.035531] tegradc tegradc.0: hdmi: get RGB quant from EDID. [ 18.035538] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 18.038840] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 18.038842] Extcon AUX1(HDMI) enable [ 18.044814] tegradc tegradc.0: unblank [ 18.045146] tegradc tegradc.1: blank - powerdown [ 220.101683] tegradc tegradc.0: blank - powerdown [ 220.153211] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 220.153225] Extcon AUX1(HDMI) disable [ 220.172405] tegradc tegradc.1: blank - powerdown [ 220.312232] tegradc tegradc.0: blank - powerdown [ 220.312253] tegradc tegradc.0: unblank [ 220.318468] tegradc tegradc.0: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000 [ 220.318558] tegradc tegradc.0: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_75m_150m [ 220.319584] tegradc tegradc.0: hdmi: get RGB quant from EDID. [ 220.319592] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 220.322937] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 220.322940] Extcon AUX1(HDMI) enable [ 220.329279] tegradc tegradc.0: unblank [ 220.329309] tegradc tegradc.1: blank - powerdown [ 223.420449] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 223.420461] Bluetooth: BNEP socket layer initialized [ 223.949093] fuse init (API version 7.26) [ 224.137630] tegradc tegradc.0: unblank [ 224.137785] tegradc tegradc.1: blank - powerdown [ 303.487009] usb 1-2.3: new high-speed USB device number 5 using tegra-xusb [ 303.508430] usb 1-2.3: New USB device found, idVendor=04e8, idProduct=6860 [ 303.508436] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 303.508439] usb 1-2.3: Product: SAMSUNG_Android [ 303.508442] usb 1-2.3: Manufacturer: SAMSUNG [ 303.508445] usb 1-2.3: SerialNumber: RZ8M5219WKB [ 303.596748] cdc_acm 1-2.3:1.1: ttyACM0: USB ACM device [ 303.599353] usbcore: registered new interface driver cdc_acm [ 303.599357] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 319.394312] usb 1-2.3: USB disconnect, device number 5 [ 319.399278] cdc_acm 1-2.3:1.1: failed to set dtr/rts [ 743.295613] usb 1-2.3: new high-speed USB device number 6 using tegra-xusb [ 743.320944] usb 1-2.3: New USB device found, idVendor=04e8, idProduct=6860 [ 743.321016] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 743.321060] usb 1-2.3: Product: SAMSUNG_Android [ 743.321097] usb 1-2.3: Manufacturer: SAMSUNG [ 743.321133] usb 1-2.3: SerialNumber: RZ8M5219WKB [ 743.329117] cdc_acm 1-2.3:1.1: ttyACM0: USB ACM device [ 756.897492] usb 1-2.3: USB disconnect, device number 6 [ 756.903497] cdc_acm 1-2.3:1.1: failed to set dtr/rts [ 757.135088] usb 1-2.3: new high-speed USB device number 7 using tegra-xusb [ 757.156181] usb 1-2.3: New USB device found, idVendor=04e8, idProduct=6864 [ 757.156187] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 757.156190] usb 1-2.3: Product: SAMSUNG_Android [ 757.156192] usb 1-2.3: Manufacturer: SAMSUNG [ 757.156194] usb 1-2.3: SerialNumber: RZ8M5219WKB [ 757.192830] rndis_host 1-2.3:1.0 usb1: register 'rndis_host' at usb-70090000.xusb-2.3, RNDIS device, 06:cf:a2:4b:d1:44 [ 757.192992] usbcore: registered new interface driver rndis_host [ 757.248430] IPv6: ADDRCONF(NETDEV_UP): usb1: link is not ready [ 2381.695036] usb 1-2.1: new full-speed USB device number 8 using tegra-xusb [ 2381.718392] usb 1-2.1: New USB device found, idVendor=10c4, idProduct=ea60 [ 2381.718702] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2381.718743] usb 1-2.1: Product: CP2102 USB to UART Bridge Controller [ 2381.718779] usb 1-2.1: Manufacturer: Silicon Labs [ 2381.718813] usb 1-2.1: SerialNumber: 0001 [ 2381.883147] usbcore: registered new interface driver cp210x [ 2381.883239] usbserial: USB Serial support registered for cp210x [ 2381.883324] cp210x 1-2.1:1.0: cp210x converter detected [ 2381.884491] usb 1-2.1: cp210x converter now attached to ttyUSB0 [ 2559.393499] usb 1-2.3: USB disconnect, device number 7 [ 2559.399892] rndis_host 1-2.3:1.0 usb1: unregister 'rndis_host' usb-70090000.xusb-2.3, RNDIS device [ 4140.414728] usb 1-2.3: new high-speed USB device number 9 using tegra-xusb [ 4140.437338] usb 1-2.3: New USB device found, idVendor=04e8, idProduct=6860 [ 4140.437364] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4140.437381] usb 1-2.3: Product: SAMSUNG_Android [ 4140.437394] usb 1-2.3: Manufacturer: SAMSUNG [ 4140.437407] usb 1-2.3: SerialNumber: RZ8M5219WKB [ 4140.443797] cdc_acm 1-2.3:1.1: ttyACM0: USB ACM device [ 4146.849047] usb 1-2.3: USB disconnect, device number 9 [ 4146.852504] cdc_acm 1-2.3:1.1: failed to set dtr/rts [ 4147.202142] usb 1-2.3: new high-speed USB device number 10 using tegra-xusb [ 4147.223460] usb 1-2.3: New USB device found, idVendor=04e8, idProduct=6860 [ 4147.223466] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4147.223470] usb 1-2.3: Product: SAMSUNG_Android [ 4147.223472] usb 1-2.3: Manufacturer: SAMSUNG [ 4147.223475] usb 1-2.3: SerialNumber: RZ8M5219WKB [ 4152.225252] usb 1-2.3: USB disconnect, device number 10 [ 4152.453644] usb 1-2.3: new high-speed USB device number 11 using tegra-xusb [ 4152.475069] usb 1-2.3: New USB device found, idVendor=04e8, idProduct=6864 [ 4152.475075] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4152.475079] usb 1-2.3: Product: SAMSUNG_Android [ 4152.475082] usb 1-2.3: Manufacturer: SAMSUNG [ 4152.475085] usb 1-2.3: SerialNumber: RZ8M5219WKB [ 4152.479133] rndis_host 1-2.3:1.0 usb1: register 'rndis_host' at usb-70090000.xusb-2.3, RNDIS device, 1a:97:e7:4e:85:66 [ 4152.585908] IPv6: ADDRCONF(NETDEV_UP): usb1: link is not ready [ 6824.866189] usb 1-2.3: USB disconnect, device number 11 [ 6824.868941] rndis_host 1-2.3:1.0 usb1: unregister 'rndis_host' usb-70090000.xusb-2.3, RNDIS device [ 6825.344010] usb 1-2.3: new high-speed USB device number 12 using tegra-xusb [ 6825.365274] usb 1-2.3: New USB device found, idVendor=04e8, idProduct=6860 [ 6825.365285] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6825.365292] usb 1-2.3: Product: SAMSUNG_Android [ 6825.365298] usb 1-2.3: Manufacturer: SAMSUNG [ 6825.365303] usb 1-2.3: SerialNumber: RZ8M5219WKB [ 6825.368437] cdc_acm 1-2.3:1.1: ttyACM0: USB ACM device [ 6829.216254] usb 1-2.3: USB disconnect, device number 12 [ 6829.840606] usb 1-2.3: new high-speed USB device number 13 using tegra-xusb [ 6829.862648] usb 1-2.3: New USB device found, idVendor=04e8, idProduct=6860 [ 6829.862654] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6829.862658] usb 1-2.3: Product: SAMSUNG_Android [ 6829.862661] usb 1-2.3: Manufacturer: SAMSUNG [ 6829.862664] usb 1-2.3: SerialNumber: RZ8M5219WKB [ 6829.865437] cdc_acm 1-2.3:1.1: ttyACM0: USB ACM device [ 6834.336271] usb 1-2.3: USB disconnect, device number 13 [ 6834.341382] cdc_acm 1-2.3:1.1: failed to set dtr/rts [ 6834.681773] usb 1-2.3: new high-speed USB device number 14 using tegra-xusb [ 6834.704697] usb 1-2.3: New USB device found, idVendor=04e8, idProduct=6864 [ 6834.704730] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6834.704752] usb 1-2.3: Product: SAMSUNG_Android [ 6834.704772] usb 1-2.3: Manufacturer: SAMSUNG [ 6834.704791] usb 1-2.3: SerialNumber: RZ8M5219WKB [ 6834.711370] rndis_host 1-2.3:1.0 usb1: register 'rndis_host' at usb-70090000.xusb-2.3, RNDIS device, 8a:00:09:b3:72:7c [ 6841.001717] IPv6: ADDRCONF(NETDEV_UP): usb1: link is not ready