[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.0-35-generic (buildd@allspice) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #50-Ubuntu SMP Tue Dec 3 01:25:33 UTC 2013 (Ubuntu 3.8.0-35.50-generic 3.8.13.13) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005f67ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000005f680000-0x000000005f6fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000005f700000-0x000000005fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: LG Electronics R400-5BPH8P1/LHOTSE , BIOS LHONSF09 10/08/2007 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x5f680 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 040000000 mask FE0000000 write-back [ 0.000000] 2 base 05F700000 mask FFFF00000 uncachable [ 0.000000] 3 base 05F800000 mask FFF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 1GB, type WB [ 0.000000] reg 1, base: 1GB, range: 512MB, type WB [ 0.000000] reg 2, base: 1527MB, range: 1MB, type UC [ 0.000000] reg 3, base: 1528MB, range: 8MB, type UC [ 0.000000] total RAM covered: 1527M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 4 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 1GB, type WB [ 0.000000] reg 1, base: 1GB, range: 512MB, type WB [ 0.000000] reg 2, base: 1527MB, range: 1MB, type UC [ 0.000000] reg 3, base: 1528MB, range: 8MB, type UC [ 0.000000] found SMP MP-table at [mem 0x000f6d00-0x000f6d0f] mapped at [c00f6d00] [ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff] [ 0.000000] [mem 0x00000000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x379fffff] page 2M [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k [ 0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff] [ 0.000000] RAMDISK: [mem 0x360e8000-0x3706bfff] [ 0.000000] ACPI: RSDP 000f6cd0 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT 5f682227 0008C (v01 LGE LGPC 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 5f68cbf8 000F4 (v03 INTEL CALISTGA 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT 5f683dc6 08DBE (v01 LGE LHOTSE 06040000 INTL 20050309) [ 0.000000] ACPI: FACS 5f68dfc0 00040 [ 0.000000] ACPI: APIC 5f68ccec 00068 (v01 INTEL CALISTGA 06040000 LOHR 0000005A) [ 0.000000] ACPI: HPET 5f68cd54 00038 (v01 INTEL CALISTGA 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG 5f68cd8c 0003C (v01 INTEL CALISTGA 06040000 LOHR 0000005A) [ 0.000000] ACPI: TCPA 5f68cdc8 00032 (v01 LGE COLUMBIA 06040000 PTL 00000001) [ 0.000000] ACPI: SLIC 5f68cdfa 00176 (v01 LGE LGPC 06040000 YSB 00000001) [ 0.000000] ACPI: APIC 5f68cf70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 5f68cfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SSDT 5f683bbc 0020A (v01 SataRe SataAhci 00001000 INTL 20050624) [ 0.000000] ACPI: SSDT 5f6834a7 00715 (v01 LGE RKY_IGFX 00001000 INTL 20050624) [ 0.000000] ACPI: SSDT 5f68283f 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 5f682799 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 5f6822b3 004E6 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 634MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x37bfdfff] [ 0.000000] HighMem [mem 0x37bfe000-0x5f67ffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x5f67ffff] [ 0.000000] On node 0 totalpages: 390671 [ 0.000000] free_area_init_node: node 0, pgdat c1905f40, node_mem_map f54f8200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1752 pages used for memmap [ 0.000000] Normal zone: 222502 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1270 pages used for memmap [ 0.000000] HighMem zone: 161164 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] e820: [mem 0x60000000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bd8000 s34944 r0 d22400 u57344 [ 0.000000] pcpu-alloc: s34944 r0 d22400 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 387617 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-35-generic root=UUID=d96bb9a2-e048-43f9-9450-a8a4e4253a5e ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 3126144 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00037bfe:0005f680) [ 0.000000] Memory: 1519508k/1563136k available (6262k kernel code, 43176k reserved, 3026k data, 792k init, 649736k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) [ 0.000000] .init : 0xc1913000 - 0xc19d9000 ( 792 kB) [ 0.000000] .data : 0xc161d9bc - 0xc1912280 (3026 kB) [ 0.000000] .text : 0xc1000000 - 0xc161d9bc (6262 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=f7408000 soft=f740a000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1861.982 MHz processor [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3723.96 BogoMIPS (lpj=7447928) [ 0.004015] pid_max: default: 32768 minimum: 301 [ 0.004759] Security Framework initialized [ 0.004785] AppArmor: AppArmor initialized [ 0.004790] Yama: becoming mindful. [ 0.004990] Mount-cache hash table entries: 512 [ 0.005672] Initializing cgroup subsys cpuacct [ 0.005680] Initializing cgroup subsys memory [ 0.005708] Initializing cgroup subsys devices [ 0.005715] Initializing cgroup subsys freezer [ 0.005722] Initializing cgroup subsys blkio [ 0.005728] Initializing cgroup subsys perf_event [ 0.005738] Initializing cgroup subsys hugetlb [ 0.005815] Disabled fast string operations [ 0.005827] CPU: Physical Processor ID: 0 [ 0.005833] CPU: Processor Core ID: 0 [ 0.005840] mce: CPU supports 6 MCE banks [ 0.005860] CPU0: Thermal monitoring handled by SMI [ 0.005869] process: using mwait in idle threads [ 0.005889] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2 [ 0.005889] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8 [ 0.005889] tlb_flushall_shift: 6 [ 0.006715] Freeing SMP alternatives: 24k freed [ 0.015325] ACPI: Core revision 20121018 [ 0.040025] ftrace: allocating 26173 entries in 52 pages [ 0.064194] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.064725] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.105718] smpboot: CPU0: Genuine Intel(R) CPU T2130 @ 1.86GHz (fam: 06, model: 0e, stepping: 0c) [ 0.108000] Performance Events: Core events, core PMU driver. [ 0.108000] ... version: 1 [ 0.108000] ... bit width: 40 [ 0.108000] ... generic registers: 2 [ 0.108000] ... value mask: 000000ffffffffff [ 0.108000] ... max period: 000000007fffffff [ 0.108000] ... fixed-purpose events: 0 [ 0.108000] ... event mask: 0000000000000003 [ 0.108000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.108000] CPU 1 irqstacks, hard=f74d8000 soft=f74da000 [ 0.108000] smpboot: Booting Node 0, Processors #1 OK [ 0.008000] Initializing CPU#1 [ 0.008000] Disabled fast string operations [ 0.008000] CPU1: Thermal monitoring handled by SMI [ 0.120059] Brought up 2 CPUs [ 0.120076] smpboot: Total of 2 processors activated (7447.92 BogoMIPS) [ 0.122050] devtmpfs: initialized [ 0.122050] EVM: security.selinux [ 0.122050] EVM: security.SMACK64 [ 0.122050] EVM: security.capability [ 0.124215] PM: Registering ACPI NVS region [mem 0x5f680000-0x5f6fffff] (524288 bytes) [ 0.127562] regulator-dummy: no parameters [ 0.127734] NET: Registered protocol family 16 [ 0.128216] EISA bus registered [ 0.128493] ACPI: bus type pci registered [ 0.128669] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.128677] PCI: not using MMCONFIG [ 0.128893] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX. [ 0.128900] PCI: BIOS BUG #81[49435000] found [ 0.128905] PCI: Using configuration type 1 for base access [ 0.132434] bio: create slab at 0 [ 0.132434] ACPI: Added _OSI(Module Device) [ 0.132434] ACPI: Added _OSI(Processor Device) [ 0.132434] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.132434] ACPI: Added _OSI(Processor Aggregator Device) [ 0.139019] ACPI: EC: Look up EC in DSDT [ 0.149489] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.154985] ACPI: SSDT 5f683165 0027A (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.156529] ACPI: Dynamic OEM Table Load: [ 0.156539] ACPI: SSDT (null) 0027A (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.156981] ACPI: SSDT 5f682a9e 00642 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.158526] ACPI: Dynamic OEM Table Load: [ 0.158535] ACPI: SSDT (null) 00642 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.159251] ACPI: SSDT 5f6833df 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.160778] ACPI: Dynamic OEM Table Load: [ 0.160787] ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.161071] ACPI: SSDT 5f6830e0 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.162556] ACPI: Dynamic OEM Table Load: [ 0.162564] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.164545] ACPI: Interpreter enabled [ 0.164576] ACPI: (supports S0 S3 S4 S5) [ 0.164630] ACPI: Using IOAPIC for interrupt routing [ 0.164679] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.165544] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.165549] PCI: Using MMCONFIG for extended config space [ 0.185657] ACPI: Power Resource [CTHT] (off) [ 0.188942] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.189380] ACPI: No dock devices found. [ 0.189398] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.190222] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.190231] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.192215] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.192225] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.192234] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.192243] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored) [ 0.192252] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) [ 0.192260] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) [ 0.192270] pci_root PNP0A08:00: host bridge window [mem 0x60000000-0xfebfffff] (ignored) [ 0.192277] PCI: root bus 00: using default resources [ 0.192382] PCI host bridge to bus 0000:00 [ 0.192393] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.192402] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.192410] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] [ 0.192439] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000 [ 0.192568] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000 [ 0.192601] pci 0000:00:02.0: reg 10: [mem 0xf8100000-0xf817ffff] [ 0.192620] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807] [ 0.192639] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref] [ 0.192658] pci 0000:00:02.0: reg 1c: [mem 0xf8200000-0xf823ffff] [ 0.192774] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000 [ 0.192801] pci 0000:00:02.1: reg 10: [mem 0xf8180000-0xf81fffff] [ 0.193027] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 [ 0.193069] pci 0000:00:1b.0: reg 10: [mem 0xf8240000-0xf8243fff 64bit] [ 0.193246] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.193306] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 [ 0.193491] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.193558] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400 [ 0.193742] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.193806] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400 [ 0.193990] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.194056] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 [ 0.194151] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f] [ 0.194229] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 [ 0.194324] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f] [ 0.194403] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 [ 0.194497] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f] [ 0.194575] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 [ 0.194670] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f] [ 0.194769] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 [ 0.194812] pci 0000:00:1d.7: reg 10: [mem 0xf8444000-0xf84443ff] [ 0.194991] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.195046] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.195212] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100 [ 0.195385] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.195400] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO [ 0.195411] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 00ff) [ 0.195422] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0300 (mask 007f) [ 0.195436] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 00e0 (mask 000f) [ 0.195528] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a [ 0.195560] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.195584] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.195608] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 0.195632] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 0.195656] pci 0000:00:1f.1: reg 20: [io 0x1810-0x181f] [ 0.195749] pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601 [ 0.195792] pci 0000:00:1f.2: reg 10: [io 0x18d0-0x18d7] [ 0.195816] pci 0000:00:1f.2: reg 14: [io 0x18c4-0x18c7] [ 0.195840] pci 0000:00:1f.2: reg 18: [io 0x18c8-0x18cf] [ 0.195864] pci 0000:00:1f.2: reg 1c: [io 0x18c0-0x18c3] [ 0.195888] pci 0000:00:1f.2: reg 20: [io 0x18b0-0x18bf] [ 0.195912] pci 0000:00:1f.2: reg 24: [mem 0xf8444400-0xf84447ff] [ 0.196029] pci 0000:00:1f.2: PME# supported from D3hot [ 0.196074] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 [ 0.196187] pci 0000:00:1f.3: reg 20: [io 0x18e0-0x18ff] [ 0.196416] pci 0000:02:00.0: [11ab:4353] type 00 class 0x020000 [ 0.196468] pci 0000:02:00.0: reg 10: [mem 0xf4000000-0xf4003fff 64bit] [ 0.196497] pci 0000:02:00.0: reg 18: [io 0x2000-0x20ff] [ 0.196724] pci 0000:02:00.0: supports D1 D2 [ 0.196732] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.196770] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.196795] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.196807] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.196820] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff] [ 0.196838] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.196945] pci 0000:00:1c.2: PCI bridge to [bus 03-04] [ 0.196958] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 0.196970] pci 0000:00:1c.2: bridge window [mem 0xf6000000-0xf7ffffff] [ 0.196988] pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref] [ 0.197132] pci 0000:05:00.0: [168c:001c] type 00 class 0x020000 [ 0.197182] pci 0000:05:00.0: reg 10: [mem 0xf8000000-0xf800ffff 64bit] [ 0.197418] pci 0000:05:00.0: PME# supported from D3hot [ 0.197473] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.197497] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.197514] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf80fffff] [ 0.197683] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode) [ 0.197710] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.197718] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.197767] pci_bus 0000:00: on NUMA node 0 [ 0.197827] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.198001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.198156] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.198387] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.198597] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.198605] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.201962] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.202116] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.202266] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15) [ 0.202414] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.202560] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.202710] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.202858] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.203007] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.203304] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.203304] vgaarb: loaded [ 0.203304] vgaarb: bridge control possible 0000:00:02.0 [ 0.204210] SCSI subsystem initialized [ 0.204218] ACPI: bus type scsi registered [ 0.204244] libata version 3.00 loaded. [ 0.204244] ACPI: bus type usb registered [ 0.204244] usbcore: registered new interface driver usbfs [ 0.204244] usbcore: registered new interface driver hub [ 0.204245] usbcore: registered new device driver usb [ 0.204245] PCI: Using ACPI for IRQ routing [ 0.212082] PCI: pci_cache_line_size set to 64 bytes [ 0.212255] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.212262] e820: reserve RAM buffer [mem 0x5f680000-0x5fffffff] [ 0.212586] NetLabel: Initializing [ 0.212593] NetLabel: domain hash size = 128 [ 0.212597] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.212627] NetLabel: unlabeled traffic allowed by default [ 0.212681] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.212681] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.212681] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.214296] Switching to clocksource hpet [ 0.238003] AppArmor: AppArmor Filesystem Enabled [ 0.238080] pnp: PnP ACPI init [ 0.238118] ACPI: bus type pnp registered [ 0.238980] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.238992] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.239002] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.239012] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.239021] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.239031] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.239041] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.239050] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.239064] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.239658] pnp 00:01: [dma 4] [ 0.239752] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.239863] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.240225] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.240238] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.240380] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.240583] system 00:05: [io 0x0680-0x069f] has been reserved [ 0.240597] system 00:05: [io 0x0800-0x080f] has been reserved [ 0.240607] system 00:05: [io 0x1000-0x107f] has been reserved [ 0.240616] system 00:05: [io 0x1180-0x11bf] has been reserved [ 0.240626] system 00:05: [io 0x1640-0x164f] has been reserved [ 0.240638] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.240839] system 00:06: [io 0x06a0-0x06af] has been reserved [ 0.240849] system 00:06: [io 0x06b0-0x06ff] has been reserved [ 0.240861] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.240987] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.241141] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.241269] pnp 00:09: Plug and Play ACPI device, IDs SYN1302 PNP0f13 (active) [ 0.241348] pnp: PnP ACPI: found 10 devices [ 0.241353] ACPI: ACPI bus type pnp unregistered [ 0.241363] PnPBIOS: Disabled by ACPI PNP [ 0.282357] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000 [ 0.282372] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 [ 0.282407] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.282416] pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.282432] pci 0000:00:1c.3: BAR 15: assigned [mem 0x60000000-0x601fffff 64bit pref] [ 0.282447] pci 0000:00:1c.3: BAR 13: assigned [io 0x4000-0x4fff] [ 0.282456] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.282468] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.282483] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff] [ 0.282496] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.282513] pci 0000:00:1c.2: PCI bridge to [bus 03-04] [ 0.282523] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 0.282538] pci 0000:00:1c.2: bridge window [mem 0xf6000000-0xf7ffffff] [ 0.282551] pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref] [ 0.282568] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.282578] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] [ 0.282592] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf80fffff] [ 0.282605] pci 0000:00:1c.3: bridge window [mem 0x60000000-0x601fffff 64bit pref] [ 0.282622] pci 0000:00:1e.0: PCI bridge to [bus 06] [ 0.282727] pci 0000:00:1e.0: setting latency timer to 64 [ 0.282740] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.282748] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] [ 0.282757] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.282765] pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf5ffffff] [ 0.282774] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.282782] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 0.282790] pci_bus 0000:03: resource 1 [mem 0xf6000000-0xf7ffffff] [ 0.282799] pci_bus 0000:03: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref] [ 0.282807] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff] [ 0.282816] pci_bus 0000:05: resource 1 [mem 0xf8000000-0xf80fffff] [ 0.282824] pci_bus 0000:05: resource 2 [mem 0x60000000-0x601fffff 64bit pref] [ 0.282833] pci_bus 0000:06: resource 4 [io 0x0000-0xffff] [ 0.282841] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff] [ 0.282926] NET: Registered protocol family 2 [ 0.283349] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.283457] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.283558] TCP: Hash tables configured (established 8192 bind 8192) [ 0.283607] TCP: reno registered [ 0.283616] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.283641] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.283805] NET: Registered protocol family 1 [ 0.283842] pci 0000:00:02.0: Boot video device [ 0.284167] PCI: CLS 64 bytes, default 64 [ 0.284279] Trying to unpack rootfs image as initramfs... [ 1.228796] Freeing initrd memory: 15888k freed [ 1.242595] Simple Boot Flag at 0x38 set to 0x1 [ 1.243318] Initialise module verification [ 1.243433] audit: initializing netlink socket (disabled) [ 1.243462] type=2000 audit(1415452181.240:1): initialized [ 1.308308] bounce pool size: 64 pages [ 1.308343] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.313421] VFS: Disk quotas dquot_6.5.2 [ 1.313582] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.315402] fuse init (API version 7.20) [ 1.315679] msgmni has been set to 1729 [ 1.316893] Key type asymmetric registered [ 1.316900] Asymmetric key parser 'x509' registered [ 1.317016] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.317107] io scheduler noop registered [ 1.317115] io scheduler deadline registered (default) [ 1.317139] io scheduler cfq registered [ 1.317561] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 1.317811] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X [ 1.318052] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X [ 1.318282] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.318338] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.318561] intel_idle: does not run on family 6 model 14 [ 1.319673] ACPI: AC Adapter [AC] (off-line) [ 1.320350] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 1.320856] ACPI: Lid Switch [LID0] [ 1.320993] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.321006] ACPI: Power Button [PWRB] [ 1.321131] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 1.321141] ACPI: Sleep Button [SLPB] [ 1.321306] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.321316] ACPI: Power Button [PWRF] [ 1.322601] ACPI: Fan [FAN0] (off) [ 1.322765] ACPI: Requesting acpi_cpufreq [ 1.329658] tsc: Marking TSC unstable due to TSC halts in idle [ 1.329682] ACPI: acpi_idle registered with cpuidle [ 1.345943] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.345952] ACPI: Thermal Zone [TZ0] (39 C) [ 1.349033] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.349041] ACPI: Thermal Zone [TZ1] (30 C) [ 1.352933] thermal LNXTHERM:02: registered as thermal_zone2 [ 1.352941] ACPI: Thermal Zone [TZ2] (40 C) [ 1.353047] GHES: HEST is not enabled! [ 1.353214] isapnp: Scanning for PnP cards... [ 1.354178] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.366222] Linux agpgart interface v0.103 [ 1.366802] agpgart-intel 0000:00:00.0: Intel 945GM Chipset [ 1.366934] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable [ 1.367555] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 1.367793] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 1.368510] ACPI: Battery Slot [CMB0] (battery present) [ 1.373000] brd: module loaded [ 1.375339] loop: module loaded [ 1.375728] ata_piix 0000:00:1f.1: version 2.13 [ 1.375837] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.380057] scsi0 : ata_piix [ 1.380985] scsi1 : ata_piix [ 1.381144] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 [ 1.381152] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 [ 1.382127] libphy: Fixed MDIO Bus: probed [ 1.382379] tun: Universal TUN/TAP device driver, 1.6 [ 1.382384] tun: (C) 1999-2004 Max Krasnyansky [ 1.382583] PPP generic driver version 2.4.2 [ 1.382708] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.382715] ehci-pci: EHCI PCI platform driver [ 1.382785] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 1.382796] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.382814] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.382846] ehci-pci 0000:00:1d.7: debug port 1 [ 1.386765] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 1.386813] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf8444000 [ 1.387060] ata2: port disabled--ignoring [ 1.396042] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.396138] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.396147] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.396155] usb usb1: Product: EHCI Host Controller [ 1.396163] usb usb1: Manufacturer: Linux 3.8.0-35-generic ehci_hcd [ 1.396170] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.396485] hub 1-0:1.0: USB hub found [ 1.396501] hub 1-0:1.0: 8 ports detected [ 1.397271] ehci-platform: EHCI generic platform driver [ 1.397300] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.397361] uhci_hcd: USB Universal Host Controller Interface driver [ 1.397424] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.397434] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.397450] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.397497] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820 [ 1.397585] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.397593] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.397601] usb usb2: Product: UHCI Host Controller [ 1.397609] usb usb2: Manufacturer: Linux 3.8.0-35-generic uhci_hcd [ 1.397616] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.397896] hub 2-0:1.0: USB hub found [ 1.397911] hub 2-0:1.0: 2 ports detected [ 1.398150] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.398161] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.398177] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.398250] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 [ 1.398336] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.398345] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.398353] usb usb3: Product: UHCI Host Controller [ 1.398360] usb usb3: Manufacturer: Linux 3.8.0-35-generic uhci_hcd [ 1.398368] usb usb3: SerialNumber: 0000:00:1d.1 [ 1.398641] hub 3-0:1.0: USB hub found [ 1.398656] hub 3-0:1.0: 2 ports detected [ 1.398918] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.398928] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.398944] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.399019] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 [ 1.399106] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.399114] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.399122] usb usb4: Product: UHCI Host Controller [ 1.399130] usb usb4: Manufacturer: Linux 3.8.0-35-generic uhci_hcd [ 1.399137] usb usb4: SerialNumber: 0000:00:1d.2 [ 1.399400] hub 4-0:1.0: USB hub found [ 1.399414] hub 4-0:1.0: 2 ports detected [ 1.399643] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.399653] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.399669] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.399740] uhci_hcd 0000:00:1d.3: irq 21, io base 0x00001880 [ 1.399825] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.399833] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.399841] usb usb5: Product: UHCI Host Controller [ 1.399849] usb usb5: Manufacturer: Linux 3.8.0-35-generic uhci_hcd [ 1.399856] usb usb5: SerialNumber: 0000:00:1d.3 [ 1.400151] hub 5-0:1.0: USB hub found [ 1.400166] hub 5-0:1.0: 2 ports detected [ 1.400609] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.405544] i8042: Detected active multiplexing controller, rev 1.1 [ 1.406877] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.406896] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.406973] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.407048] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.407117] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.407426] mousedev: PS/2 mouse device common for all mice [ 1.407932] rtc_cmos 00:07: RTC can wake from S4 [ 1.408233] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.408283] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.408582] device-mapper: uevent: version 1.0.3 [ 1.408802] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com [ 1.408862] EISA: Probing bus 0 at eisa.0 [ 1.408879] Cannot allocate resource for EISA slot 1 [ 1.408886] Cannot allocate resource for EISA slot 2 [ 1.408892] Cannot allocate resource for EISA slot 3 [ 1.408898] Cannot allocate resource for EISA slot 4 [ 1.408937] EISA: Detected 0 cards. [ 1.408963] cpufreq-nforce2: No nForce2 chipset. [ 1.409101] cpuidle: using governor ladder [ 1.409286] cpuidle: using governor menu [ 1.409300] ledtrig-cpu: registered to indicate activity on CPUs [ 1.409306] EFI Variables Facility v0.08 2004-May-17 [ 1.409798] ashmem: initialized [ 1.410150] TCP: cubic registered [ 1.410526] NET: Registered protocol family 10 [ 1.411084] NET: Registered protocol family 17 [ 1.411122] Key type dns_resolver registered [ 1.411599] Using IPI No-Shortcut mode [ 1.411812] Loading module verification certificates [ 1.425572] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: bab43694c655e6aee9fceadd34ffb05cf4363bc5' [ 1.425606] registered taskstats version 1 [ 1.426780] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.436180] Key type trusted registered [ 1.442124] Key type encrypted registered [ 1.448842] rtc_cmos 00:07: setting system clock to 2014-11-08 13:09:41 UTC (1415452181) [ 1.449867] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.449870] EDD information not available. [ 1.548408] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WH01, max UDMA/33 [ 1.564292] ata1.00: configured for UDMA/33 [ 1.707959] isapnp: No Plug & Play device found [ 1.708034] usb 1-2: new high-speed USB device number 2 using ehci-pci [ 1.711635] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WH01 PQ: 0 ANSI: 5 [ 1.716544] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.716548] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.716739] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.716896] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.717085] Freeing unused kernel memory: 792k freed [ 1.717512] Write protecting the kernel text: 6264k [ 1.717660] Write protecting the kernel read-only data: 2484k [ 1.717662] NX-protecting the kernel data: 3976k [ 1.735927] systemd-udevd[100]: starting version 204 [ 1.776884] sky2: driver version 1.30 [ 1.776991] sky2 0000:02:00.0: Yukon-2 FE chip revision 3 [ 1.777112] sky2 0000:02:00.0: irq 43 for MSI/MSI-X [ 1.777460] sky2 0000:02:00.0 eth0: addr 00:e0:91:15:9d:00 [ 1.792493] Disabling lock debugging due to kernel taint [ 1.793429] ahci 0000:00:1f.2: version 3.0 [ 1.793510] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X [ 1.793602] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode [ 1.793607] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 1.793614] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.794711] scsi2 : ahci [ 1.795280] scsi3 : ahci [ 1.795977] scsi4 : ahci [ 1.800126] scsi5 : ahci [ 1.800258] ata3: SATA max UDMA/133 abar m1024@0xf8444400 port 0xf8444500 irq 44 [ 1.800262] ata4: DUMMY [ 1.800267] ata5: SATA max UDMA/133 abar m1024@0xf8444400 port 0xf8444600 irq 44 [ 1.800269] ata6: DUMMY [ 1.841133] usb 1-2: New USB device found, idVendor=0cf2, idProduct=6220 [ 1.841140] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=4 [ 1.841143] usb 1-2: Product: UB6220 [ 1.841147] usb 1-2: Manufacturer: ENE [ 1.841150] usb 1-2: SerialNumber: 1234567\xffffffeb\xffffff90\xffffffb8\xffffff90\xffffffb8\xffffffe2\xffffff84\xffffff92\xffffff84\xffffff92 [ 1.952081] usb 1-4: new high-speed USB device number 3 using ehci-pci [ 2.120066] ata5: SATA link down (SStatus 0 SControl 300) [ 2.120103] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.121579] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 2.121903] ata3.00: ATA-8: WDC WD3200BPVT-00ZEST0, 01.01A01, max UDMA/133 [ 2.121908] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.123418] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 2.123710] ata3.00: configured for UDMA/133 [ 2.123941] scsi 2:0:0:0: Direct-Access ATA WDC WD3200BPVT-0 01.0 PQ: 0 ANSI: 5 [ 2.124163] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.124168] sd 2:0:0:0: [sda] 4096-byte physical blocks [ 2.124227] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.124244] sd 2:0:0:0: [sda] Write Protect is off [ 2.124248] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.124280] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.189268] usb 1-4: New USB device found, idVendor=05c8, idProduct=0103 [ 2.189273] usb 1-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 2.189277] usb 1-4: Product: FO13FF-65 PC-CAM [ 2.189281] usb 1-4: Manufacturer: Foxlink [ 2.189284] usb 1-4: SerialNumber: 1.10 [ 2.194133] Initializing USB Mass Storage driver... [ 2.194467] scsi6 : usb-storage 1-2:1.0 [ 2.194584] usbcore: registered new interface driver usb-storage [ 2.194587] USB Mass Storage support registered. [ 2.195015] sda: sda1 sda2 < sda5 sda6 > [ 2.195842] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.993583] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 2.993590] EXT4-fs (sda1): write access will be enabled during recovery [ 3.192816] scsi 6:0:0:0: Direct-Access USB2.0 CardReader SM 0200 PQ: 0 ANSI: 0 [ 3.193808] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.195897] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 7.741382] EXT4-fs (sda1): orphan cleanup on readonly fs [ 7.741401] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 13811 [ 7.741507] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 57781 [ 7.741532] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 58235 [ 7.741554] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 56124 [ 7.741618] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 57714 [ 7.861081] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 57403 [ 7.861113] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 57643 [ 7.905043] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 44840 [ 7.905447] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 57337 [ 7.949288] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 57133 [ 7.949315] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 44941 [ 7.949338] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 58200 [ 7.976480] EXT4-fs (sda1): 12 orphan inodes deleted [ 7.976483] EXT4-fs (sda1): recovery complete [ 8.325335] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 22.599288] Adding 1561596k swap on /dev/sda5. Priority:-1 extents:1 across:1561596k [ 22.671544] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.980164] systemd-udevd[272]: starting version 204 [ 23.217900] lp: driver loaded but no devices found [ 23.319954] acpi device:05: registered as cooling_device3 [ 23.320499] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 23.351596] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 23.355435] wmi: Mapper loaded [ 23.363641] [drm] Initialized drm 1.1.0 20060810 [ 23.414143] i915 0000:00:02.0: setting latency timer to 64 [ 23.415962] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 23.415968] [drm] Driver supports precise vblank timestamp query. [ 23.416084] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 23.424710] cfg80211: Calling CRDA to update world regulatory domain [ 23.467873] intel_rng: FWH not detected [ 23.506516] ath5k 0000:05:00.0: registered as 'phy0' [ 23.509708] type=1400 audit(1415452203.556:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=331 comm="apparmor_parser" [ 23.510331] type=1400 audit(1415452203.556:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=331 comm="apparmor_parser" [ 23.510681] type=1400 audit(1415452203.556:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=331 comm="apparmor_parser" [ 23.596285] [drm] initialized overlay support [ 23.664444] microcode: CPU0 sig=0x6ec, pf=0x80, revision=0x5b [ 24.089004] Linux video capture interface: v2.00 [ 24.096974] fbcon: inteldrmfb (fb0) is primary device [ 24.127968] uvcvideo: Found UVC 1.00 device FO13FF-65 PC-CAM (05c8:0103) [ 24.133814] input: FO13FF-65 PC-CAM as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input6 [ 24.136089] usbcore: registered new interface driver uvcvideo [ 24.136090] USB Video Class driver (1.1.1) [ 24.138952] ath: EEPROM regdomain: 0x60 [ 24.138953] ath: EEPROM indicates we should expect a direct regpair map [ 24.138956] ath: Country alpha2 being used: 00 [ 24.138957] ath: Regpair used: 0x60 [ 24.155545] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 24.156040] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) [ 24.308127] Console: switching to colour frame buffer device 160x50 [ 24.313194] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 24.313197] i915 0000:00:02.0: registered panic notifier [ 24.313207] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 24.313475] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251) [ 24.313484] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 24.313489] ACPI Warning: 0x000011b0-0x000011bf SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251) [ 24.313495] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 24.313497] ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251) [ 24.313502] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 24.313505] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 24.313681] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 24.320761] leds_ss4200: no LED devices found [ 24.340074] psmouse serio2: synaptics: Touchpad model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x200000/0x0, board id: 3655, fw id: 131143 [ 24.384513] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7 [ 24.759398] microcode: CPU1 sig=0x6ec, pf=0x80, revision=0x5b [ 24.827390] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 25.363505] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 25.363623] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 25.391830] cfg80211: World regulatory domain updated: [ 25.391837] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 25.391840] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 25.391843] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 25.391846] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 25.391849] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 25.391852] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.842019] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 29.569767] init: failsafe main process (693) killed by TERM signal [ 30.192509] Bluetooth: Core ver 2.16 [ 30.192562] NET: Registered protocol family 31 [ 30.192565] Bluetooth: HCI device and connection manager initialized [ 30.193107] Bluetooth: HCI socket layer initialized [ 30.193114] Bluetooth: L2CAP socket layer initialized [ 30.193125] Bluetooth: SCO socket layer initialized [ 30.227636] Bluetooth: RFCOMM TTY layer initialized [ 30.227657] Bluetooth: RFCOMM socket layer initialized [ 30.227660] Bluetooth: RFCOMM ver 1.11 [ 30.484236] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 30.484242] Bluetooth: BNEP filters: protocol multicast [ 30.484255] Bluetooth: BNEP socket layer initialized [ 31.048444] type=1400 audit(1415452211.096:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=812 comm="apparmor_parser" [ 31.049079] type=1400 audit(1415452211.096:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=812 comm="apparmor_parser" [ 31.049424] type=1400 audit(1415452211.096:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=812 comm="apparmor_parser" [ 31.059284] type=1400 audit(1415452211.104:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=815 comm="apparmor_parser" [ 31.060421] type=1400 audit(1415452211.108:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=815 comm="apparmor_parser" [ 31.061698] type=1400 audit(1415452211.108:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*//pxgsettings" pid=815 comm="apparmor_parser" [ 31.062566] type=1400 audit(1415452211.108:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*//sanitized_helper" pid=815 comm="apparmor_parser" [ 31.063189] type=1400 audit(1415452211.108:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-ofono" pid=815 comm="apparmor_parser" [ 31.069124] type=1400 audit(1415452211.116:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=816 comm="apparmor_parser" [ 31.071692] type=1400 audit(1415452211.116:14): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=816 comm="apparmor_parser" [ 31.242392] init: avahi-cups-reload main process (842) terminated with status 1 [ 31.265234] ppdev: user-space parallel port driver [ 34.689879] sky2 0000:02:00.0 eth0: enabling interface [ 34.689984] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 34.690716] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 34.703688] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 34.704328] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 34.851061] vboxdrv: Found 2 processor cores. [ 34.851351] vboxdrv: fAsync=0 offMin=0x444 offMax=0x17ae [ 34.851466] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 34.851468] vboxdrv: Successfully loaded version 4.3.14 (interface 0x001a0007). [ 35.076691] vboxpci: IOMMU not found (not registered) [ 36.924691] wlan0: authenticate with 00:21:04:3d:a6:8f [ 36.932963] wlan0: send auth to 00:21:04:3d:a6:8f (try 1/3) [ 36.934571] wlan0: authenticated [ 36.934789] ath5k 0000:05:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 36.934795] ath5k 0000:05:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 36.936085] wlan0: associate with 00:21:04:3d:a6:8f (try 1/3) [ 36.938194] wlan0: RX AssocResp from 00:21:04:3d:a6:8f (capab=0x431 status=0 aid=2) [ 36.938529] wlan0: associated [ 36.938542] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 36.938858] cfg80211: Calling CRDA for country: GB [ 36.943014] ath: regdomain 0x833a updated by CountryIE [ 36.943020] ath: EEPROM regdomain: 0x833a [ 36.943022] ath: EEPROM indicates we should expect a country code [ 36.943025] ath: doing EEPROM country->regdmn map search [ 36.943027] ath: country maps to regdmn code: 0x37 [ 36.943030] ath: Country alpha2 being used: GB [ 36.943032] ath: Regpair used: 0x37 [ 36.943034] cfg80211: Regulatory domain changed to country: GB [ 36.943036] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 36.943039] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 36.943042] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 36.943045] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 36.943048] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 36.943050] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 39.870393] init: anacron main process (962) killed by TERM signal [ 81.191023] init: anacron main process (2229) killed by TERM signal [ 89.381759] sky2 0000:02:00.0 eth0: disabling interface [ 89.585369] wlan0: deauthenticating from 00:21:04:3d:a6:8f by local choice (reason=3) [ 89.592405] cfg80211: Calling CRDA to update world regulatory domain [ 89.598134] cfg80211: World regulatory domain updated: [ 89.598142] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 89.598145] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 89.598148] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 89.598151] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 89.598154] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 89.598157] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 90.979432] init: anacron main process (2549) killed by TERM signal [ 93.468893] PM: Syncing filesystems ... done. [ 93.852642] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 93.868247] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 93.884253] Suspending console(s) (use no_console_suspend to debug) [ 93.884747] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 93.933334] i8042 kbd 00:08: System wakeup enabled by ACPI [ 93.948089] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3hot [ 93.995169] sd 2:0:0:0: [sda] Stopping disk [ 94.644134] PM: suspend of devices complete after 759.554 msecs [ 94.644447] PM: late suspend of devices complete after 0.309 msecs [ 94.816244] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI [ 94.832111] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI [ 94.832159] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI [ 94.832207] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI [ 94.832254] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI [ 94.832457] PM: noirq suspend of devices complete after 188.006 msecs [ 94.832590] ACPI: Preparing to enter system sleep state S3 [ 94.896156] PM: Saving platform NVS memory [ 94.896800] Disabling non-boot CPUs ... [ 95.000101] smpboot: CPU 1 is now offline [ 95.000588] Extended CMOS year: 2000 [ 95.000588] ACPI: Low-level resume complete [ 95.000588] PM: Restoring platform NVS memory [ 95.000588] Extended CMOS year: 2000 [ 95.000588] CPU0: Thermal monitoring handled by SMI [ 95.000588] Enabling non-boot CPUs ... [ 95.000588] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 94.898284] Initializing CPU#1 [ 94.898284] Disabled fast string operations [ 94.898284] CPU1: Thermal monitoring handled by SMI [ 95.012383] CPU1 is up [ 95.013493] ACPI: Waking up from system sleep state S3 [ 95.448167] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0 [ 95.464393] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI [ 95.464443] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI [ 95.464492] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI [ 95.464541] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI [ 95.480093] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI [ 95.668295] PM: noirq resume of devices complete after 236.159 msecs [ 95.668532] PM: early resume of devices complete after 0.183 msecs [ 95.668652] i915 0000:00:02.0: setting latency timer to 64 [ 95.671678] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 95.671947] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 95.671978] usb usb2: root hub lost power or was reset [ 95.672201] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 95.672229] usb usb3: root hub lost power or was reset [ 95.672246] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 95.672274] usb usb4: root hub lost power or was reset [ 95.672291] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 95.672319] usb usb5: root hub lost power or was reset [ 95.672338] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 95.672364] pci 0000:00:1e.0: setting latency timer to 64 [ 95.672378] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 95.672391] ahci 0000:00:1f.2: setting latency timer to 64 [ 95.673286] ata2: port disabled--ignoring [ 95.690496] i8042 kbd 00:08: System wakeup disabled by ACPI [ 95.836462] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 95.836465] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out [ 95.852316] ata1.00: configured for UDMA/33 [ 95.862508] Extended CMOS year: 2000 [ 95.888068] usb 1-2: reset high-speed USB device number 2 using ehci-pci [ 95.996053] ata5: SATA link down (SStatus 0 SControl 300) [ 96.048067] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 96.049100] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 96.050469] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 96.050710] ata3.00: configured for UDMA/133 [ 96.064119] sd 2:0:0:0: [sda] Starting disk [ 96.132048] usb 1-4: reset high-speed USB device number 3 using ehci-pci [ 96.367677] PM: resume of devices complete after 699.137 msecs [ 96.368137] Restarting tasks ... done. [ 96.426177] video LNXVIDEO:00: Restoring backlight state [ 97.305163] sky2 0000:02:00.0 eth0: enabling interface [ 97.305684] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 97.317537] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 99.561333] wlan0: authenticate with 00:21:04:3d:a6:8f [ 99.567415] wlan0: send auth to 00:21:04:3d:a6:8f (try 1/3) [ 99.582090] wlan0: authenticated [ 99.582374] ath5k 0000:05:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 99.582380] ath5k 0000:05:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 99.584075] wlan0: associate with 00:21:04:3d:a6:8f (try 1/3) [ 99.596931] wlan0: RX AssocResp from 00:21:04:3d:a6:8f (capab=0x431 status=0 aid=2) [ 99.597283] wlan0: associated [ 99.597332] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 99.597420] cfg80211: Calling CRDA for country: GB [ 99.603966] ath: regdomain 0x833a updated by CountryIE [ 99.603972] ath: EEPROM regdomain: 0x833a [ 99.603974] ath: EEPROM indicates we should expect a country code [ 99.603977] ath: doing EEPROM country->regdmn map search [ 99.603979] ath: country maps to regdmn code: 0x37 [ 99.603982] ath: Country alpha2 being used: GB [ 99.603984] ath: Regpair used: 0x37 [ 99.603986] cfg80211: Regulatory domain changed to country: GB [ 99.603988] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 99.603991] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 99.604055] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 99.604059] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 99.604061] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 99.604064] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 101.373307] sky2 0000:02:00.0 eth0: disabling interface [ 101.576570] wlan0: deauthenticating from 00:21:04:3d:a6:8f by local choice (reason=3) [ 101.593790] cfg80211: Calling CRDA to update world regulatory domain [ 101.600115] cfg80211: World regulatory domain updated: [ 101.600123] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 101.600126] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 101.600129] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 101.600132] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 101.600135] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 101.600138] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 102.375592] init: anacron main process (2990) killed by TERM signal [ 103.904981] PM: Syncing filesystems ... done. [ 104.892595] Freezing user space processes ... (elapsed 0.03 seconds) done. [ 104.924245] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 104.940287] Suspending console(s) (use no_console_suspend to debug) [ 104.940775] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 104.987206] i8042 kbd 00:08: System wakeup enabled by ACPI [ 105.046563] sd 2:0:0:0: [sda] Stopping disk [ 105.412085] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3hot [ 106.216092] PM: suspend of devices complete after 1275.477 msecs [ 106.216400] PM: late suspend of devices complete after 0.304 msecs [ 106.388253] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI [ 106.404091] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI [ 106.404139] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI [ 106.404187] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI [ 106.404234] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI [ 106.404436] PM: noirq suspend of devices complete after 188.032 msecs [ 106.404570] ACPI: Preparing to enter system sleep state S3 [ 106.456078] PM: Saving platform NVS memory [ 106.456756] Disabling non-boot CPUs ... [ 106.560110] smpboot: CPU 1 is now offline [ 106.560596] Extended CMOS year: 2000 [ 106.560596] ACPI: Low-level resume complete [ 106.560596] PM: Restoring platform NVS memory [ 106.560596] Extended CMOS year: 2000 [ 106.560596] CPU0: Thermal monitoring handled by SMI [ 106.560596] Enabling non-boot CPUs ... [ 106.560596] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 106.458134] Initializing CPU#1 [ 106.458134] Disabled fast string operations [ 106.458134] CPU1: Thermal monitoring handled by SMI [ 106.572390] CPU1 is up [ 106.573503] ACPI: Waking up from system sleep state S3 [ 106.808137] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0 [ 106.824379] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI [ 106.824429] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI [ 106.824478] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI [ 106.824528] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI [ 106.840074] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI [ 107.028276] PM: noirq resume of devices complete after 236.168 msecs [ 107.028514] PM: early resume of devices complete after 0.183 msecs [ 107.028570] i915 0000:00:02.0: setting latency timer to 64 [ 107.028916] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 107.029042] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 107.029091] usb usb2: root hub lost power or was reset [ 107.029122] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 107.029670] usb usb3: root hub lost power or was reset [ 107.031898] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 107.031926] usb usb4: root hub lost power or was reset [ 107.031954] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 107.031982] usb usb5: root hub lost power or was reset [ 107.032031] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 107.032056] pci 0000:00:1e.0: setting latency timer to 64 [ 107.032071] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 107.032084] ahci 0000:00:1f.2: setting latency timer to 64 [ 107.032887] ata2: port disabled--ignoring [ 107.131403] i8042 kbd 00:08: System wakeup disabled by ACPI [ 107.196441] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 107.196444] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out [ 107.212328] ata1.00: configured for UDMA/33 [ 107.222321] Extended CMOS year: 2000 [ 107.248048] usb 1-2: reset high-speed USB device number 2 using ehci-pci [ 107.352065] ata5: SATA link down (SStatus 0 SControl 300) [ 107.408053] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 107.409075] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 107.410466] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 107.410910] ata3.00: configured for UDMA/133 [ 107.424095] sd 2:0:0:0: [sda] Starting disk [ 107.492076] usb 1-4: reset high-speed USB device number 3 using ehci-pci [ 107.727670] PM: resume of devices complete after 699.148 msecs [ 107.728094] Restarting tasks ... done. [ 107.776247] video LNXVIDEO:00: Restoring backlight state [ 108.492181] sky2 0000:02:00.0 eth0: enabling interface [ 108.492630] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 108.505616] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 110.713311] wlan0: authenticate with 00:21:04:3d:a6:8f [ 110.719136] wlan0: send auth to 00:21:04:3d:a6:8f (try 1/3) [ 110.723192] wlan0: authenticated [ 110.723436] ath5k 0000:05:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 110.723442] ath5k 0000:05:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 110.724125] wlan0: associate with 00:21:04:3d:a6:8f (try 1/3) [ 110.728741] wlan0: RX AssocResp from 00:21:04:3d:a6:8f (capab=0x431 status=0 aid=2) [ 110.729100] wlan0: associated [ 110.729142] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 110.729240] cfg80211: Calling CRDA for country: GB [ 110.734560] ath: regdomain 0x833a updated by CountryIE [ 110.734567] ath: EEPROM regdomain: 0x833a [ 110.734569] ath: EEPROM indicates we should expect a country code [ 110.734572] ath: doing EEPROM country->regdmn map search [ 110.734574] ath: country maps to regdmn code: 0x37 [ 110.734577] ath: Country alpha2 being used: GB [ 110.734579] ath: Regpair used: 0x37 [ 110.734581] cfg80211: Regulatory domain changed to country: GB [ 110.734583] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 110.734587] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 110.734589] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 110.734592] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 110.734595] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 110.734597] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 112.213478] init: anacron main process (3427) killed by TERM signal [ 129.083617] init: anacron main process (3840) killed by TERM signal [ 131.875770] init: anacron main process (4091) killed by TERM signal [ 134.200137] sky2 0000:02:00.0 eth0: disabling interface [ 135.245203] wlan0: deauthenticating from 00:21:04:3d:a6:8f by local choice (reason=3) [ 135.251762] cfg80211: Calling CRDA to update world regulatory domain [ 135.255796] cfg80211: World regulatory domain updated: [ 135.255803] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 135.255806] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 135.255810] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 135.255813] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 135.255815] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 135.255818] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 137.124860] init: anacron main process (4454) killed by TERM signal [ 138.272681] PM: Syncing filesystems ... done. [ 138.370135] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 138.384247] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 138.400283] Suspending console(s) (use no_console_suspend to debug) [ 138.400770] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 138.446716] i8042 kbd 00:08: System wakeup enabled by ACPI [ 138.460107] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3hot [ 138.563451] sd 2:0:0:0: [sda] Stopping disk [ 139.292091] PM: suspend of devices complete after 891.480 msecs [ 139.292394] PM: late suspend of devices complete after 0.299 msecs [ 139.464235] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI [ 139.480091] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI [ 139.480140] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI [ 139.480188] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI [ 139.480235] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI [ 139.480437] PM: noirq suspend of devices complete after 188.040 msecs [ 139.480570] ACPI: Preparing to enter system sleep state S3 [ 139.532078] PM: Saving platform NVS memory [ 139.532766] Disabling non-boot CPUs ... [ 139.636070] smpboot: CPU 1 is now offline [ 139.636577] Extended CMOS year: 2000 [ 139.636577] ACPI: Low-level resume complete [ 139.636577] PM: Restoring platform NVS memory [ 139.636577] Extended CMOS year: 2000 [ 139.636577] CPU0: Thermal monitoring handled by SMI [ 139.636577] Enabling non-boot CPUs ... [ 139.636577] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 139.534258] Initializing CPU#1 [ 139.534258] Disabled fast string operations [ 139.534258] CPU1: Thermal monitoring handled by SMI [ 139.648378] CPU1 is up [ 139.649514] ACPI: Waking up from system sleep state S3 [ 139.884152] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0 [ 139.900379] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI [ 139.900429] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI [ 139.900479] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI [ 139.900528] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI [ 139.916074] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI [ 140.104286] PM: noirq resume of devices complete after 236.177 msecs [ 140.104523] PM: early resume of devices complete after 0.185 msecs [ 140.104638] i915 0000:00:02.0: setting latency timer to 64 [ 140.107665] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 140.107879] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 140.107937] usb usb2: root hub lost power or was reset [ 140.108190] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 140.108218] usb usb3: root hub lost power or was reset [ 140.108235] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 140.108263] usb usb4: root hub lost power or was reset [ 140.108280] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 140.108307] usb usb5: root hub lost power or was reset [ 140.108326] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 140.108351] pci 0000:00:1e.0: setting latency timer to 64 [ 140.108366] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 140.108379] ahci 0000:00:1f.2: setting latency timer to 64 [ 140.109263] ata2: port disabled--ignoring [ 140.126568] i8042 kbd 00:08: System wakeup disabled by ACPI [ 140.272460] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 140.272463] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out [ 140.288292] ata1.00: configured for UDMA/33 [ 140.297055] Extended CMOS year: 2000 [ 140.324054] usb 1-2: reset high-speed USB device number 2 using ehci-pci [ 140.428063] ata5: SATA link down (SStatus 0 SControl 300) [ 140.484063] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 140.485093] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 140.486416] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 140.487592] ata3.00: configured for UDMA/133 [ 140.500105] sd 2:0:0:0: [sda] Starting disk [ 140.568044] usb 1-4: reset high-speed USB device number 3 using ehci-pci [ 141.270944] PM: resume of devices complete after 1166.415 msecs [ 141.271368] Restarting tasks ... done. [ 141.311427] video LNXVIDEO:00: Restoring backlight state [ 141.928097] sky2 0000:02:00.0 eth0: enabling interface [ 141.928565] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 141.941179] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 144.144596] wlan0: authenticate with 00:21:04:3d:a6:8f [ 144.148656] wlan0: send auth to 00:21:04:3d:a6:8f (try 1/3) [ 144.159278] wlan0: authenticated [ 144.159520] ath5k 0000:05:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 144.159526] ath5k 0000:05:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 144.160054] wlan0: associate with 00:21:04:3d:a6:8f (try 1/3) [ 144.265967] wlan0: RX AssocResp from 00:21:04:3d:a6:8f (capab=0x431 status=0 aid=2) [ 144.266317] wlan0: associated [ 144.266365] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 144.266464] cfg80211: Calling CRDA for country: GB [ 144.270828] ath: regdomain 0x833a updated by CountryIE [ 144.270834] ath: EEPROM regdomain: 0x833a [ 144.270836] ath: EEPROM indicates we should expect a country code [ 144.270839] ath: doing EEPROM country->regdmn map search [ 144.270841] ath: country maps to regdmn code: 0x37 [ 144.270844] ath: Country alpha2 being used: GB [ 144.270846] ath: Regpair used: 0x37 [ 144.270848] cfg80211: Regulatory domain changed to country: GB [ 144.270850] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 144.270853] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 144.270856] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 144.270859] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 144.270861] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 144.270864] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 154.614259] init: anacron main process (4872) killed by TERM signal [ 155.235691] PM: Syncing filesystems ... done. [ 155.316942] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 155.332239] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 155.348279] Suspending console(s) (use no_console_suspend to debug) [ 155.348652] wlan0: deauthenticating from 00:21:04:3d:a6:8f by local choice (reason=3) [ 155.349251] cfg80211: Calling CRDA to update world regulatory domain [ 155.464314] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 155.511845] i8042 kbd 00:08: System wakeup enabled by ACPI [ 155.681297] sd 2:0:0:0: [sda] Stopping disk [ 155.940070] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3hot [ 156.312088] PM: suspend of devices complete after 963.480 msecs [ 156.312408] PM: late suspend of devices complete after 0.316 msecs [ 156.484247] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI [ 156.500093] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI [ 156.500141] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI [ 156.500189] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI [ 156.500236] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI [ 156.500437] PM: noirq suspend of devices complete after 188.026 msecs [ 156.500569] ACPI: Preparing to enter system sleep state S3 [ 156.552078] PM: Saving platform NVS memory [ 156.552769] Disabling non-boot CPUs ... [ 156.656126] smpboot: CPU 1 is now offline [ 156.656600] Extended CMOS year: 2000 [ 156.656600] ACPI: Low-level resume complete [ 156.656600] PM: Restoring platform NVS memory [ 156.656600] Extended CMOS year: 2000 [ 156.656600] CPU0: Thermal monitoring handled by SMI [ 156.656600] Enabling non-boot CPUs ... [ 156.656600] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 156.554155] Initializing CPU#1 [ 156.554155] Disabled fast string operations [ 156.554155] CPU1: Thermal monitoring handled by SMI [ 156.668397] CPU1 is up [ 156.669528] ACPI: Waking up from system sleep state S3 [ 156.820091] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0 [ 156.836381] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI [ 156.836431] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI [ 156.836480] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI [ 156.836530] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI [ 156.852081] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI [ 157.040277] PM: noirq resume of devices complete after 236.166 msecs [ 157.040518] PM: early resume of devices complete after 0.187 msecs [ 157.040632] i915 0000:00:02.0: setting latency timer to 64 [ 157.043657] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 157.043819] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 157.043848] usb usb2: root hub lost power or was reset [ 157.043868] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 157.043895] usb usb3: root hub lost power or was reset [ 157.043912] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 157.043939] usb usb4: root hub lost power or was reset [ 157.043956] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 157.043984] usb usb5: root hub lost power or was reset [ 157.044036] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 157.044062] pci 0000:00:1e.0: setting latency timer to 64 [ 157.044076] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 157.044089] ahci 0000:00:1f.2: setting latency timer to 64 [ 157.046592] ata2: port disabled--ignoring [ 157.064480] i8042 kbd 00:08: System wakeup disabled by ACPI [ 157.208700] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 157.208703] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out [ 157.224315] ata1.00: configured for UDMA/33 [ 157.264048] usb 1-2: reset high-speed USB device number 2 using ehci-pci [ 157.368068] ata5: SATA link down (SStatus 0 SControl 300) [ 157.368103] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 157.413050] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 157.414383] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 157.414624] ata3.00: configured for UDMA/133 [ 157.428094] sd 2:0:0:0: [sda] Starting disk [ 157.508062] usb 1-4: reset high-speed USB device number 3 using ehci-pci [ 157.758796] PM: resume of devices complete after 718.273 msecs [ 157.778304] cfg80211: World regulatory domain updated: [ 157.778311] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 157.778314] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 157.778318] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 157.778320] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 157.778323] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 157.778326] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 157.759239] Restarting tasks ... done. [ 157.813369] video LNXVIDEO:00: Restoring backlight state [ 158.389866] sky2 0000:02:00.0 eth0: disabling interface [ 158.593164] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 158.789755] sky2 0000:02:00.0 eth0: enabling interface [ 158.790122] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 158.804566] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 158.844963] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 161.052589] wlan0: authenticate with 00:21:04:3d:a6:8f [ 161.056882] wlan0: send auth to 00:21:04:3d:a6:8f (try 1/3) [ 161.058421] wlan0: authenticated [ 161.058629] ath5k 0000:05:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 161.058635] ath5k 0000:05:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 161.060064] wlan0: associate with 00:21:04:3d:a6:8f (try 1/3) [ 161.062169] wlan0: RX AssocResp from 00:21:04:3d:a6:8f (capab=0x431 status=0 aid=2) [ 161.062511] wlan0: associated [ 161.062523] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 161.063320] cfg80211: Calling CRDA for country: GB [ 161.068072] ath: regdomain 0x833a updated by CountryIE [ 161.068078] ath: EEPROM regdomain: 0x833a [ 161.068080] ath: EEPROM indicates we should expect a country code [ 161.068083] ath: doing EEPROM country->regdmn map search [ 161.068085] ath: country maps to regdmn code: 0x37 [ 161.068088] ath: Country alpha2 being used: GB [ 161.068090] ath: Regpair used: 0x37 [ 161.068092] cfg80211: Regulatory domain changed to country: GB [ 161.068094] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 161.068097] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 161.068100] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 161.068103] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 161.068105] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 161.068108] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 161.583882] ACPI: Failed to switch the brightness [ 161.583943] ACPI: Failed to switch the brightness [ 161.583955] ACPI: Failed to switch the brightness [ 161.588173] ACPI: Failed to switch the brightness [ 161.762952] ACPI: Failed to switch the brightness [ 161.763006] ACPI: Failed to switch the brightness [ 161.763019] ACPI: Failed to switch the brightness [ 161.768512] ACPI: Failed to switch the brightness [ 161.944564] ACPI: Failed to switch the brightness [ 161.944620] ACPI: Failed to switch the brightness [ 161.944633] ACPI: Failed to switch the brightness [ 161.950054] ACPI: Failed to switch the brightness [ 162.116129] ACPI: Failed to switch the brightness [ 162.116183] ACPI: Failed to switch the brightness [ 162.116195] ACPI: Failed to switch the brightness [ 162.121592] ACPI: Failed to switch the brightness [ 162.282514] ACPI: Failed to switch the brightness [ 162.282574] ACPI: Failed to switch the brightness [ 162.282587] ACPI: Failed to switch the brightness [ 162.288964] ACPI: Failed to switch the brightness [ 162.464107] ACPI: Failed to switch the brightness [ 162.464164] ACPI: Failed to switch the brightness [ 162.464176] ACPI: Failed to switch the brightness [ 162.469587] ACPI: Failed to switch the brightness [ 162.665814] ACPI: Failed to switch the brightness [ 162.665870] ACPI: Failed to switch the brightness [ 162.665883] ACPI: Failed to switch the brightness [ 162.671321] ACPI: Failed to switch the brightness [ 163.134802] ACPI: Failed to switch the brightness [ 163.134856] ACPI: Failed to switch the brightness [ 163.134869] ACPI: Failed to switch the brightness [ 163.140341] ACPI: Failed to switch the brightness [ 214.155811] ata3.00: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x0 [ 214.155819] ata3.00: irq_stat 0x40000008 [ 214.155824] ata3.00: failed command: READ FPDMA QUEUED [ 214.155832] ata3.00: cmd 60/20:08:00:08:d7/00:00:07:00:00/40 tag 1 ncq 16384 in [ 214.155832] res 41/04:00:00:08:d7/00:00:07:00:00/40 Emask 0x401 (device error) [ 214.155836] ata3.00: status: { DRDY ERR } [ 214.155839] ata3.00: error: { ABRT } [ 214.160151] ata3.00: configured for UDMA/133 [ 214.160166] ata3: EH complete [ 459.909355] audit_printk_skb: 9 callbacks suppressed [ 459.909363] type=1400 audit(1415453343.249:18): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=6266 comm="apparmor_parser" [ 459.910164] type=1400 audit(1415453343.249:19): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=6266 comm="apparmor_parser"