[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-8-generic (buildd@allspice) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:24 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=75425483-e545-419e-8f5b-a1d871617aec ro quiet splash vt.handoff=7 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d400 (usable) [ 0.000000] BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000ab592000 (usable) [ 0.000000] BIOS-e820: 00000000ab592000 - 00000000ab5da000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000ab5da000 - 00000000ab5e6000 (ACPI data) [ 0.000000] BIOS-e820: 00000000ab5e6000 - 00000000ab5fa000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000ab5fa000 - 00000000ab61e000 (reserved) [ 0.000000] BIOS-e820: 00000000ab61e000 - 00000000ab61f000 (usable) [ 0.000000] BIOS-e820: 00000000ab61f000 - 00000000ab622000 (reserved) [ 0.000000] BIOS-e820: 00000000ab622000 - 00000000ab62a000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000ab62a000 - 00000000ab62d000 (reserved) [ 0.000000] BIOS-e820: 00000000ab62d000 - 00000000ab632000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000ab632000 - 00000000ab652000 (reserved) [ 0.000000] BIOS-e820: 00000000ab652000 - 00000000ab695000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000ab695000 - 00000000ab800000 (usable) [ 0.000000] BIOS-e820: 00000000ade00000 - 00000000b0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000148000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: Dell Inc. Vostro 3500/0NVXFV, BIOS A10 10/25/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x148000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 100000000 mask FC0000000 write-back [ 0.000000] 2 base 140000000 mask FF8000000 write-back [ 0.000000] 3 base 0AC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0B0000000 mask FF0000000 uncachable [ 0.000000] 5 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000ac000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xab800 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000fcdb0] fcdb0 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000ab800000 [ 0.000000] 0000000000 - 00ab800000 page 2M [ 0.000000] kernel direct mapping tables up to ab800000 @ 1fffc000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000148000000 [ 0.000000] 0100000000 - 0148000000 page 2M [ 0.000000] kernel direct mapping tables up to 148000000 @ ab7f9000-ab800000 [ 0.000000] RAMDISK: 366e0000 - 37368000 [ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v03 DELL ) [ 0.000000] ACPI: XSDT 00000000ab5da088 00064 (v01 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 00000000ab5e3e68 000F4 (v04 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110112/tbfadt-369) [ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xAB62DF40/0x00000000AB62DF80, using 32 (20110112/tbfadt-486) [ 0.000000] ACPI: DSDT 00000000ab5da180 09CE8 (v02 DELL WN09 00000050 INTL 20051117) [ 0.000000] ACPI: FACS 00000000ab62df40 00040 [ 0.000000] ACPI: APIC 00000000ab5e3f60 00072 (v01 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 00000000ab5e3fd8 0014E (v01 AMICPU PROC 00000001 MSFT 03000001) [ 0.000000] ACPI: MCFG 00000000ab5e4128 0003C (v01 DELL WN09 01072009 MSFT 00000097) [ 0.000000] ACPI: SLIC 00000000ab5e4168 00176 (v01 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: HPET 00000000ab5e42e0 00038 (v01 DELL WN09 01072009 AMI. 00000003) [ 0.000000] ACPI: OSFR 00000000ab5e4318 00086 (v01 DELL M08 07DA0A19 ASL 00000061) [ 0.000000] ACPI: SSDT 00000000ab5e43a0 01BB1 (v01 NvdRef NvdTabl 00001000 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000148000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000148000000 [ 0.000000] NODE_DATA [0000000147ffb000 - 0000000147ffffff] [ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff880144000000-ffff8801477fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00148000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[5] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x000ab592 [ 0.000000] 0: 0x000ab61e -> 0x000ab61f [ 0.000000] 0: 0x000ab695 -> 0x000ab800 [ 0.000000] 0: 0x00100000 -> 0x00148000 [ 0.000000] On node 0 totalpages: 997003 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3919 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 683830 pages, LIFO batch:31 [ 0.000000] Normal zone: 4032 pages used for memmap [ 0.000000] Normal zone: 290880 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000ab592000 - 00000000ab5da000 [ 0.000000] PM: Registered nosave memory: 00000000ab5da000 - 00000000ab5e6000 [ 0.000000] PM: Registered nosave memory: 00000000ab5e6000 - 00000000ab5fa000 [ 0.000000] PM: Registered nosave memory: 00000000ab5fa000 - 00000000ab61e000 [ 0.000000] PM: Registered nosave memory: 00000000ab61f000 - 00000000ab622000 [ 0.000000] PM: Registered nosave memory: 00000000ab622000 - 00000000ab62a000 [ 0.000000] PM: Registered nosave memory: 00000000ab62a000 - 00000000ab62d000 [ 0.000000] PM: Registered nosave memory: 00000000ab62d000 - 00000000ab632000 [ 0.000000] PM: Registered nosave memory: 00000000ab632000 - 00000000ab652000 [ 0.000000] PM: Registered nosave memory: 00000000ab652000 - 00000000ab695000 [ 0.000000] PM: Registered nosave memory: 00000000ab800000 - 00000000ade00000 [ 0.000000] PM: Registered nosave memory: 00000000ade00000 - 00000000b0000000 [ 0.000000] PM: Registered nosave memory: 00000000b0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at b0000000 (gap: b0000000:30000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800ab200000 s84416 r8192 d22080 u524288 [ 0.000000] pcpu-alloc: s84416 r8192 d22080 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 978629 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=75425483-e545-419e-8f5b-a1d871617aec ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3837856k/5373952k available (5940k kernel code, 1385940k absent, 150156k reserved, 5017k data, 956k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 40632320 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.010000] Detected 2526.666 MHz processor. [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.33 BogoMIPS (lpj=25266660) [ 0.000007] pid_max: default: 32768 minimum: 301 [ 0.000033] Security Framework initialized [ 0.000047] AppArmor: AppArmor initialized [ 0.000049] Yama: becoming mindful. [ 0.000455] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001579] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.002033] Mount-cache hash table entries: 256 [ 0.002152] Initializing cgroup subsys ns [ 0.002156] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.002158] Initializing cgroup subsys cpuacct [ 0.002162] Initializing cgroup subsys memory [ 0.002169] Initializing cgroup subsys devices [ 0.002172] Initializing cgroup subsys freezer [ 0.002173] Initializing cgroup subsys net_cls [ 0.002175] Initializing cgroup subsys blkio [ 0.002206] CPU: Physical Processor ID: 0 [ 0.002207] CPU: Processor Core ID: 0 [ 0.002214] mce: CPU supports 9 MCE banks [ 0.002226] CPU0: Thermal monitoring enabled (TM1) [ 0.002234] using mwait in idle threads. [ 0.004599] ACPI: Core revision 20110112 [ 0.016292] ftrace: allocating 24314 entries in 96 pages [ 0.024493] Setting APIC routing to flat [ 0.024899] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.124839] CPU0: Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz stepping 05 [ 0.243298] APIC calibration not consistent with PM-Timer: 92ms instead of 100ms [ 0.243300] APIC delta adjusted to PM-Timer: 831252 (769997) [ 0.243310] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver. [ 0.243317] ... version: 3 [ 0.243318] ... bit width: 48 [ 0.243319] ... generic registers: 4 [ 0.243321] ... value mask: 0000ffffffffffff [ 0.243322] ... max period: 000000007fffffff [ 0.243323] ... fixed-purpose events: 3 [ 0.243325] ... event mask: 000000070000000f [ 0.243813] Booting Node 0, Processors #1 #2 #3 Ok. [ 0.783130] Brought up 4 CPUs [ 0.783134] Total of 4 processors activated (20215.47 BogoMIPS). [ 0.784930] devtmpfs: initialized [ 0.785836] print_constraints: dummy: [ 0.785865] Time: 21:58:52 Date: 04/17/11 [ 0.785896] NET: Registered protocol family 16 [ 0.785993] Trying to unpack rootfs image as initramfs... [ 0.785996] ACPI: bus type pci registered [ 0.786066] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.786069] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.832592] PCI: Using configuration type 1 for base access [ 0.833321] bio: create slab at 0 [ 0.834971] ACPI: EC: Look up EC in DSDT [ 0.836519] ACPI: Executed 1 blocks of module-level executable AML code [ 0.905780] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.946821] ACPI: SSDT 00000000ab622c18 003A4 (v01 AMI IST 00000001 MSFT 03000001) [ 0.947234] ACPI: Dynamic OEM Table Load: [ 0.947236] ACPI: SSDT (null) 003A4 (v01 AMI IST 00000001 MSFT 03000001) [ 0.947691] ACPI: Interpreter enabled [ 0.947694] ACPI: (supports S0 S3 S4 S5) [ 0.947716] ACPI: Using IOAPIC for interrupt routing [ 0.947962] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.983111] ACPI: No dock devices found. [ 0.983116] HEST: Table not found. [ 0.983119] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.983280] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.983389] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.983391] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.983393] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.983395] pci_root PNP0A08:00: host bridge window [mem 0xb0000000-0xffffffff] [ 0.983409] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600 [ 0.983427] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics [ 0.983446] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604 [ 0.983471] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.983473] pci 0000:00:01.0: PME# disabled [ 0.983485] pci 0000:00:02.0: [8086:0046] type 0 class 0x000300 [ 0.983495] pci 0000:00:02.0: reg 10: [mem 0xfa400000-0xfa7fffff 64bit] [ 0.983501] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.983506] pci 0000:00:02.0: reg 20: [io 0xf080-0xf087] [ 0.983565] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780 [ 0.983593] pci 0000:00:16.0: reg 10: [mem 0xfb409000-0xfb40900f 64bit] [ 0.983668] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.983672] pci 0000:00:16.0: PME# disabled [ 0.983712] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03 [ 0.983737] pci 0000:00:1a.0: reg 10: [mem 0xfb408000-0xfb4083ff] [ 0.983824] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.983829] pci 0000:00:1a.0: PME# disabled [ 0.983858] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403 [ 0.983879] pci 0000:00:1b.0: reg 10: [mem 0xfb400000-0xfb403fff 64bit] [ 0.983955] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.983960] pci 0000:00:1b.0: PME# disabled [ 0.983986] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604 [ 0.984063] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.984068] pci 0000:00:1c.0: PME# disabled [ 0.984095] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604 [ 0.984174] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.984179] pci 0000:00:1c.1: PME# disabled [ 0.984206] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604 [ 0.984284] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.984288] pci 0000:00:1c.2: PME# disabled [ 0.984318] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604 [ 0.984396] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.984400] pci 0000:00:1c.4: PME# disabled [ 0.984436] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03 [ 0.984461] pci 0000:00:1d.0: reg 10: [mem 0xfb407000-0xfb4073ff] [ 0.984548] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.984553] pci 0000:00:1d.0: PME# disabled [ 0.984576] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.984652] pci 0000:00:1f.0: [8086:3b0b] type 0 class 0x000601 [ 0.984771] pci 0000:00:1f.2: [8086:3b2f] type 0 class 0x000106 [ 0.984796] pci 0000:00:1f.2: reg 10: [io 0xf070-0xf077] [ 0.984807] pci 0000:00:1f.2: reg 14: [io 0xf060-0xf063] [ 0.984818] pci 0000:00:1f.2: reg 18: [io 0xf050-0xf057] [ 0.984829] pci 0000:00:1f.2: reg 1c: [io 0xf040-0xf043] [ 0.984840] pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f] [ 0.984851] pci 0000:00:1f.2: reg 24: [mem 0xfb406000-0xfb4067ff] [ 0.984899] pci 0000:00:1f.2: PME# supported from D3hot [ 0.984903] pci 0000:00:1f.2: PME# disabled [ 0.984925] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05 [ 0.984946] pci 0000:00:1f.3: reg 10: [mem 0xfb405000-0xfb4050ff 64bit] [ 0.984975] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f] [ 0.985022] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180 [ 0.985048] pci 0000:00:1f.6: reg 10: [mem 0xfb404000-0xfb404fff 64bit] [ 0.985172] pci 0000:01:00.0: [10de:0a75] type 0 class 0x000300 [ 0.985187] pci 0000:01:00.0: reg 10: [mem 0xf9000000-0xf9ffffff] [ 0.985202] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.985218] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.985229] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f] [ 0.985241] pci 0000:01:00.0: reg 30: [mem 0xfa000000-0xfa07ffff pref] [ 0.985308] pci 0000:01:00.1: [10de:0be3] type 0 class 0x000403 [ 0.985323] pci 0000:01:00.1: reg 10: [mem 0xfa080000-0xfa083fff] [ 0.985448] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.985451] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.985453] pci 0000:00:01.0: bridge window [mem 0xf9000000-0xfa0fffff] [ 0.985457] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.985511] pci 0000:00:1c.0: PCI bridge to [bus 11-11] [ 0.985516] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.985521] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.985529] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.985611] pci 0000:12:00.0: [14e4:4727] type 0 class 0x000280 [ 0.985642] pci 0000:12:00.0: reg 10: [mem 0xfb300000-0xfb303fff 64bit] [ 0.985766] pci 0000:12:00.0: supports D1 D2 [ 0.985767] pci 0000:12:00.0: PME# supported from D0 D3hot D3cold [ 0.985773] pci 0000:12:00.0: PME# disabled [ 1.002937] pci 0000:00:1c.1: PCI bridge to [bus 12-12] [ 1.002945] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) [ 1.002950] pci 0000:00:1c.1: bridge window [mem 0xfb300000-0xfb3fffff] [ 1.002958] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.003038] pci 0000:13:00.0: [10ec:8168] type 0 class 0x000200 [ 1.003058] pci 0000:13:00.0: reg 10: [io 0xd000-0xd0ff] [ 1.003087] pci 0000:13:00.0: reg 18: [mem 0xd2c04000-0xd2c04fff 64bit pref] [ 1.003104] pci 0000:13:00.0: reg 20: [mem 0xd2c00000-0xd2c03fff 64bit pref] [ 1.003116] pci 0000:13:00.0: reg 30: [mem 0xfb200000-0xfb21ffff pref] [ 1.003162] pci 0000:13:00.0: supports D1 D2 [ 1.003163] pci 0000:13:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.003169] pci 0000:13:00.0: PME# disabled [ 1.012449] Freeing initrd memory: 12832k freed [ 1.022928] pci 0000:00:1c.2: PCI bridge to [bus 13-13] [ 1.022939] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 1.022945] pci 0000:00:1c.2: bridge window [mem 0xfb200000-0xfb2fffff] [ 1.022957] pci 0000:00:1c.2: bridge window [mem 0xd2c00000-0xd2cfffff 64bit pref] [ 1.023030] pci 0000:00:1c.4: PCI bridge to [bus 15-15] [ 1.023035] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 1.023039] pci 0000:00:1c.4: bridge window [mem 0xfa800000-0xfb1fffff] [ 1.023046] pci 0000:00:1c.4: bridge window [mem 0xd2100000-0xd2afffff 64bit pref] [ 1.023121] pci 0000:00:1e.0: PCI bridge to [bus 20-20] (subtractive decode) [ 1.023126] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.023131] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 1.023138] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.023141] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 1.023143] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 1.023145] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 1.023147] pci 0000:00:1e.0: bridge window [mem 0xb0000000-0xffffffff] (subtractive decode) [ 1.023185] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.023387] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT] [ 1.023460] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 1.023491] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 1.023521] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 1.023553] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 1.023682] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 1.023869] pci0000:00: ACPI _OSC control (0x19) granted [ 1.028213] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 1.028257] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 1.028299] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15) [ 1.028340] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15) [ 1.028381] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 1.028423] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 1.028465] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 1.028506] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 1.028607] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.028618] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none [ 1.028620] vgaarb: loaded [ 1.028768] SCSI subsystem initialized [ 1.028829] libata version 3.00 loaded. [ 1.028866] usbcore: registered new interface driver usbfs [ 1.028875] usbcore: registered new interface driver hub [ 1.028897] usbcore: registered new device driver usb [ 1.029196] wmi: Mapper loaded [ 1.029197] PCI: Using ACPI for IRQ routing [ 1.029200] PCI: pci_cache_line_size set to 64 bytes [ 1.029292] reserve RAM buffer: 000000000009d400 - 000000000009ffff [ 1.029294] reserve RAM buffer: 00000000ab592000 - 00000000abffffff [ 1.029297] reserve RAM buffer: 00000000ab61f000 - 00000000abffffff [ 1.029299] reserve RAM buffer: 00000000ab800000 - 00000000abffffff [ 1.029383] NetLabel: Initializing [ 1.029384] NetLabel: domain hash size = 128 [ 1.029385] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.029399] NetLabel: unlabeled traffic allowed by default [ 1.029438] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.029443] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.031459] Switching to clocksource hpet [ 1.032889] Switched to NOHz mode on CPU #0 [ 1.032989] Switched to NOHz mode on CPU #3 [ 1.032999] Switched to NOHz mode on CPU #2 [ 1.033023] Switched to NOHz mode on CPU #1 [ 1.036869] AppArmor: AppArmor Filesystem Enabled [ 1.036899] pnp: PnP ACPI init [ 1.036917] ACPI: bus type pnp registered [ 1.037008] pnp 00:00: [bus 00-ff] [ 1.037010] pnp 00:00: [io 0x0cf8-0x0cff] [ 1.037013] pnp 00:00: [io 0x0000-0x0cf7 window] [ 1.037015] pnp 00:00: [io 0x0d00-0xffff window] [ 1.037017] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 1.037018] pnp 00:00: [mem 0x00000000 window] [ 1.037020] pnp 00:00: [mem 0xb0000000-0xffffffff window] [ 1.037107] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 1.037151] pnp 00:01: [mem 0xfed14000-0xfed19fff] [ 1.037153] pnp 00:01: [mem 0xe0000000-0xefffffff] [ 1.037154] pnp 00:01: [mem 0xfed90000-0xfed93fff] [ 1.037156] pnp 00:01: [mem 0xfed20000-0xfed3ffff] [ 1.037157] pnp 00:01: [mem 0xfee00000-0xfee0ffff] [ 1.037208] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved [ 1.037210] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 1.037212] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved [ 1.037216] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.037218] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved [ 1.037220] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.037341] pnp 00:02: [dma 4] [ 1.037343] pnp 00:02: [io 0x0000-0x000f] [ 1.037344] pnp 00:02: [io 0x0081-0x0083] [ 1.037346] pnp 00:02: [io 0x0087] [ 1.037347] pnp 00:02: [io 0x0089-0x008b] [ 1.037348] pnp 00:02: [io 0x008f] [ 1.037350] pnp 00:02: [io 0x00c0-0x00df] [ 1.037373] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.037381] pnp 00:03: [io 0x0070-0x0071] [ 1.037393] pnp 00:03: [irq 8] [ 1.037416] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.037423] pnp 00:04: [io 0x0061] [ 1.037443] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 1.037450] pnp 00:05: [io 0x00f0-0x00ff] [ 1.037455] pnp 00:05: [irq 13] [ 1.037477] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 1.037494] pnp 00:06: [io 0x0010-0x001f] [ 1.037495] pnp 00:06: [io 0x0022-0x003f] [ 1.037496] pnp 00:06: [io 0x0044-0x005f] [ 1.037498] pnp 00:06: [io 0x0068-0x006f] [ 1.037499] pnp 00:06: [io 0x0072-0x007f] [ 1.037501] pnp 00:06: [io 0x0080] [ 1.037502] pnp 00:06: [io 0x0084-0x0086] [ 1.037503] pnp 00:06: [io 0x0088] [ 1.037505] pnp 00:06: [io 0x008c-0x008e] [ 1.037506] pnp 00:06: [io 0x0090-0x009f] [ 1.037507] pnp 00:06: [io 0x00a2-0x00bf] [ 1.037509] pnp 00:06: [io 0x00e0-0x00ef] [ 1.037510] pnp 00:06: [io 0x04d0-0x04d1] [ 1.037512] pnp 00:06: [mem 0xfe800000-0xfe8001ff] [ 1.037553] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 1.037555] system 00:06: [mem 0xfe800000-0xfe8001ff] has been reserved [ 1.037558] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.037596] pnp 00:07: [irq 12] [ 1.037622] pnp 00:07: Plug and Play ACPI device, IDs SYN0604 SYN0600 SYN0002 PNP0f13 (active) [ 1.037636] pnp 00:08: [io 0x0060] [ 1.037637] pnp 00:08: [io 0x0064] [ 1.037639] pnp 00:08: [io 0x0062] [ 1.037640] pnp 00:08: [io 0x0066] [ 1.037646] pnp 00:08: [irq 1] [ 1.037671] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.037791] pnp 00:09: [io 0x0400-0x047f] [ 1.037793] pnp 00:09: [io 0x1180-0x119f] [ 1.037794] pnp 00:09: [io 0x0500-0x057f] [ 1.037796] pnp 00:09: [mem 0xfed1c000-0xfed1ffff] [ 1.037797] pnp 00:09: [mem 0xfec00000-0xfecfffff] [ 1.037799] pnp 00:09: [mem 0xfed08000-0xfed08fff] [ 1.037800] pnp 00:09: [mem 0xff000000-0xffffffff] [ 1.037840] system 00:09: [io 0x0400-0x047f] has been reserved [ 1.037842] system 00:09: [io 0x1180-0x119f] has been reserved [ 1.037844] system 00:09: [io 0x0500-0x057f] has been reserved [ 1.037846] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.037848] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 1.037850] system 00:09: [mem 0xfed08000-0xfed08fff] has been reserved [ 1.037853] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 1.037855] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.037948] pnp 00:0a: [mem 0xfed00000-0xfed003ff] [ 1.037981] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active) [ 1.038055] pnp 00:0b: [irq 20] [ 1.038092] pnp 00:0b: Plug and Play ACPI device, IDs SMO8800 (active) [ 1.038247] pnp: PnP ACPI: found 12 devices [ 1.038249] ACPI: ACPI bus type pnp unregistered [ 1.044146] pci 0000:00:1c.0: BAR 14: assigned [mem 0xd2d00000-0xd2efffff] [ 1.044151] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd2f00000-0xd30fffff 64bit pref] [ 1.044154] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd3100000-0xd32fffff 64bit pref] [ 1.044156] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 1.044159] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff] [ 1.044161] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 1.044163] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 1.044166] pci 0000:00:01.0: bridge window [mem 0xf9000000-0xfa0fffff] [ 1.044169] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 1.044172] pci 0000:00:1c.0: PCI bridge to [bus 11-11] [ 1.044176] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 1.044182] pci 0000:00:1c.0: bridge window [mem 0xd2d00000-0xd2efffff] [ 1.044186] pci 0000:00:1c.0: bridge window [mem 0xd2f00000-0xd30fffff 64bit pref] [ 1.044194] pci 0000:00:1c.1: PCI bridge to [bus 12-12] [ 1.044197] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 1.044203] pci 0000:00:1c.1: bridge window [mem 0xfb300000-0xfb3fffff] [ 1.044208] pci 0000:00:1c.1: bridge window [mem 0xd3100000-0xd32fffff 64bit pref] [ 1.044215] pci 0000:00:1c.2: PCI bridge to [bus 13-13] [ 1.044218] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 1.044224] pci 0000:00:1c.2: bridge window [mem 0xfb200000-0xfb2fffff] [ 1.044229] pci 0000:00:1c.2: bridge window [mem 0xd2c00000-0xd2cfffff 64bit pref] [ 1.044237] pci 0000:00:1c.4: PCI bridge to [bus 15-15] [ 1.044240] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 1.044246] pci 0000:00:1c.4: bridge window [mem 0xfa800000-0xfb1fffff] [ 1.044250] pci 0000:00:1c.4: bridge window [mem 0xd2100000-0xd2afffff 64bit pref] [ 1.044257] pci 0000:00:1e.0: PCI bridge to [bus 20-20] [ 1.044259] pci 0000:00:1e.0: bridge window [io disabled] [ 1.044264] pci 0000:00:1e.0: bridge window [mem disabled] [ 1.044269] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 1.044285] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.044288] pci 0000:00:01.0: setting latency timer to 64 [ 1.044299] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.044303] pci 0000:00:1c.0: setting latency timer to 64 [ 1.044310] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 1.044315] pci 0000:00:1c.1: setting latency timer to 64 [ 1.044324] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.044329] pci 0000:00:1c.2: setting latency timer to 64 [ 1.044336] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.044340] pci 0000:00:1c.4: setting latency timer to 64 [ 1.044349] pci 0000:00:1e.0: setting latency timer to 64 [ 1.044353] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.044355] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.044356] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.044358] pci_bus 0000:00: resource 7 [mem 0xb0000000-0xffffffff] [ 1.044360] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 1.044362] pci_bus 0000:01: resource 1 [mem 0xf9000000-0xfa0fffff] [ 1.044364] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] [ 1.044366] pci_bus 0000:11: resource 0 [io 0x2000-0x2fff] [ 1.044367] pci_bus 0000:11: resource 1 [mem 0xd2d00000-0xd2efffff] [ 1.044369] pci_bus 0000:11: resource 2 [mem 0xd2f00000-0xd30fffff 64bit pref] [ 1.044371] pci_bus 0000:12: resource 0 [io 0x3000-0x3fff] [ 1.044373] pci_bus 0000:12: resource 1 [mem 0xfb300000-0xfb3fffff] [ 1.044374] pci_bus 0000:12: resource 2 [mem 0xd3100000-0xd32fffff 64bit pref] [ 1.044376] pci_bus 0000:13: resource 0 [io 0xd000-0xdfff] [ 1.044378] pci_bus 0000:13: resource 1 [mem 0xfb200000-0xfb2fffff] [ 1.044380] pci_bus 0000:13: resource 2 [mem 0xd2c00000-0xd2cfffff 64bit pref] [ 1.044382] pci_bus 0000:15: resource 0 [io 0xc000-0xcfff] [ 1.044383] pci_bus 0000:15: resource 1 [mem 0xfa800000-0xfb1fffff] [ 1.044385] pci_bus 0000:15: resource 2 [mem 0xd2100000-0xd2afffff 64bit pref] [ 1.044387] pci_bus 0000:20: resource 4 [io 0x0000-0x0cf7] [ 1.044389] pci_bus 0000:20: resource 5 [io 0x0d00-0xffff] [ 1.044390] pci_bus 0000:20: resource 6 [mem 0x000a0000-0x000bffff] [ 1.044392] pci_bus 0000:20: resource 7 [mem 0xb0000000-0xffffffff] [ 1.044420] NET: Registered protocol family 2 [ 1.044552] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.045440] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.047246] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.047469] TCP: Hash tables configured (established 524288 bind 65536) [ 1.047471] TCP reno registered [ 1.047481] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 1.047501] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 1.047601] NET: Registered protocol family 1 [ 1.047619] pci 0000:00:02.0: Boot video device [ 1.301431] PCI: CLS 64 bytes, default 64 [ 1.301433] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.301435] Placing 64MB software IO TLB between ffff8800a7190000 - ffff8800ab190000 [ 1.301437] software IO TLB at phys 0xa7190000 - 0xab190000 [ 1.301885] audit: initializing netlink socket (disabled) [ 1.301893] type=2000 audit(1303077533.160:1): initialized [ 1.313582] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.315073] VFS: Disk quotas dquot_6.5.2 [ 1.315120] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.315652] fuse init (API version 7.16) [ 1.315725] msgmni has been set to 7520 [ 1.315942] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.315969] io scheduler noop registered [ 1.315971] io scheduler deadline registered [ 1.316005] io scheduler cfq registered (default) [ 1.316086] pcieport 0000:00:01.0: setting latency timer to 64 [ 1.316113] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 1.316161] pcieport 0000:00:1c.0: setting latency timer to 64 [ 1.316210] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 1.316289] pcieport 0000:00:1c.1: setting latency timer to 64 [ 1.316339] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X [ 1.316418] pcieport 0000:00:1c.2: setting latency timer to 64 [ 1.316468] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X [ 1.316547] pcieport 0000:00:1c.4: setting latency timer to 64 [ 1.316597] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X [ 1.316681] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.316806] pciehp: Using ACPI for slot detection. [ 1.316877] pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 3b4a ss_vid 1028 ss_did 441 [ 1.316910] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded [ 1.316915] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.316952] intel_idle: MWAIT substates: 0x1120 [ 1.316953] intel_idle: v0.4 model 0x25 [ 1.316954] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.317054] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.317094] ACPI: AC Adapter [AC] (on-line) [ 1.317186] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.317191] ACPI: Power Button [PWRB] [ 1.317225] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 1.481241] ACPI: Lid Switch [LID0] [ 1.481316] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 1.481322] ACPI: Sleep Button [SBTN] [ 1.481362] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.481364] ACPI: Power Button [PWRF] [ 1.481525] ACPI: acpi_idle yielding to intel_idle [ 1.493993] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.493996] ACPI: Thermal Zone [THM] (64 C) [ 1.494017] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.494072] ERST: Table is not found! [ 1.494160] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.521615] ACPI: Battery Slot [BAT0] (battery present) [ 1.563092] Linux agpgart interface v0.103 [ 1.563156] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset [ 1.563273] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 1.564151] agpgart-intel 0000:00:00.0: detected 32768K stolen memory [ 1.564294] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000 [ 1.565192] brd: module loaded [ 1.565588] loop: module loaded [ 1.565666] i2c-core: driver [adp5520] using legacy suspend method [ 1.565668] i2c-core: driver [adp5520] using legacy resume method [ 1.565993] Fixed MDIO Bus: probed [ 1.566016] PPP generic driver version 2.4.2 [ 1.566049] tun: Universal TUN/TAP device driver, 1.6 [ 1.566051] tun: (C) 1999-2004 Max Krasnyansky [ 1.566119] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.566139] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.566159] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.566163] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.566197] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.566267] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.570209] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 1.570230] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfb408000 [ 1.591182] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.591322] hub 1-0:1.0: USB hub found [ 1.591325] hub 1-0:1.0: 2 ports detected [ 1.591390] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.591403] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.591406] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 1.591442] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.591490] ehci_hcd 0000:00:1d.0: debug port 2 [ 1.595445] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 1.595458] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfb407000 [ 1.611174] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.611299] hub 2-0:1.0: USB hub found [ 1.611302] hub 2-0:1.0: 2 ports detected [ 1.611350] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.611358] uhci_hcd: USB Universal Host Controller Interface driver [ 1.611445] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12 [ 1.632303] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.632310] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.632403] mousedev: PS/2 mouse device common for all mice [ 1.633386] rtc_cmos 00:03: RTC can wake from S4 [ 1.633440] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.633470] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 1.633549] device-mapper: uevent: version 1.0.3 [ 1.633611] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 1.633682] device-mapper: multipath: version 1.2.0 loaded [ 1.633689] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.633863] cpuidle: using governor ladder [ 1.633988] cpuidle: using governor menu [ 1.634192] TCP cubic registered [ 1.634289] NET: Registered protocol family 10 [ 1.634681] NET: Registered protocol family 17 [ 1.634694] Registering the dns_resolver key type [ 1.636071] PM: Hibernation image not present or could not be loaded. [ 1.636082] registered taskstats version 1 [ 1.636398] Magic number: 7:934:1005 [ 1.636415] input input2: hash matches [ 1.636432] i8042 aux 00:07: hash matches [ 1.636558] rtc_cmos 00:03: setting system clock to 2011-04-17 21:58:53 UTC (1303077533) [ 1.636560] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.636561] EDD information not available. [ 1.638255] Freeing unused kernel memory: 956k freed [ 1.638413] Write protecting the kernel read-only data: 10240k [ 1.639262] Freeing unused kernel memory: 184k freed [ 1.643659] Freeing unused kernel memory: 1444k freed [ 1.662451] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.662775] <30>udev[69]: starting version 167 [ 1.694329] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.694359] r8169 0000:13:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.694409] r8169 0000:13:00.0: setting latency timer to 64 [ 1.694476] r8169 0000:13:00.0: irq 45 for MSI/MSI-X [ 1.694957] r8169 0000:13:00.0: eth0: RTL8168d/8111d at 0xffffc90000678000, f0:4d:a2:ac:85:53, XID 083000c0 IRQ 45 [ 1.724640] ahci 0000:00:1f.2: version 3.0 [ 1.724666] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.724725] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X [ 1.741244] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.741253] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst [ 1.741262] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.841879] scsi0 : ahci [ 1.842051] scsi1 : ahci [ 1.842203] scsi2 : ahci [ 1.842372] scsi3 : ahci [ 1.842526] scsi4 : ahci [ 1.842675] scsi5 : ahci [ 1.842950] ata1: SATA max UDMA/133 abar m2048@0xfb406000 port 0xfb406100 irq 46 [ 1.842953] ata2: SATA max UDMA/133 abar m2048@0xfb406000 port 0xfb406180 irq 46 [ 1.842956] ata3: SATA max UDMA/133 abar m2048@0xfb406000 port 0xfb406200 irq 46 [ 1.842959] ata4: SATA max UDMA/133 abar m2048@0xfb406000 port 0xfb406280 irq 46 [ 1.842962] ata5: SATA max UDMA/133 abar m2048@0xfb406000 port 0xfb406300 irq 46 [ 1.842965] ata6: SATA max UDMA/133 abar m2048@0xfb406000 port 0xfb406380 irq 46 [ 1.911096] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 2.061934] hub 1-1:1.0: USB hub found [ 2.062121] hub 1-1:1.0: 6 ports detected [ 2.180953] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 2.190955] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.190987] ata4: SATA link down (SStatus 0 SControl 300) [ 2.191022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.191050] ata6: SATA link down (SStatus 0 SControl 300) [ 2.191090] ata5: SATA link down (SStatus 0 SControl 300) [ 2.191118] ata3: SATA link down (SStatus 0 SControl 300) [ 2.193005] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 2.193342] ata1.00: ATA-8: WDC WD5000BEKT-75KA9T0, 01.01A01, max UDMA/133 [ 2.193347] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.195453] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 2.195808] ata1.00: configured for UDMA/133 [ 2.196009] scsi 0:0:0:0: Direct-Access ATA WDC WD5000BEKT-7 01.0 PQ: 0 ANSI: 5 [ 2.196207] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.196211] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.196269] sd 0:0:0:0: [sda] Write Protect is off [ 2.196273] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.196311] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.213722] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L633C, DW50, max UDMA/100 [ 2.213727] ata2.00: applying bridge limits [ 2.237206] ata2.00: configured for UDMA/100 [ 2.241296] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L633C DW50 PQ: 0 ANSI: 5 [ 2.248530] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.248535] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.248687] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.248749] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.283164] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 2.283618] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.300858] Refined TSC clocksource calibration: 2527.000 MHz. [ 2.300865] Switching to clocksource tsc [ 2.331683] hub 2-1:1.0: USB hub found [ 2.331843] hub 2-1:1.0: 8 ports detected [ 2.410974] usb 1-1.1: new full speed USB device using ehci_hcd and address 3 [ 2.523392] hub 1-1.1:1.0: USB hub found [ 2.523613] hub 1-1.1:1.0: 3 ports detected [ 2.600914] usb 1-1.4: new full speed USB device using ehci_hcd and address 4 [ 2.790804] usb 2-1.1: new low speed USB device using ehci_hcd and address 3 [ 2.917093] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input5 [ 2.917176] generic-usb 0003:0458:003A.0001: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.1/input0 [ 2.917187] usbcore: registered new interface driver usbhid [ 2.917188] usbhid: USB HID core driver [ 2.980684] usb 2-1.8: new high speed USB device using ehci_hcd and address 4 [ 3.099911] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 3.250563] usb 1-1.1.1: new full speed USB device using ehci_hcd and address 5 [ 3.480297] input: HID 413c:8161 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/input/input6 [ 3.480394] generic-usb 0003:413C:8161.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 413c:8161] on usb-0000:00:1a.0-1.1.1/input0 [ 3.570374] usb 1-1.1.2: new full speed USB device using ehci_hcd and address 6 [ 3.687582] input: HID 413c:8162 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/input/input7 [ 3.687655] generic-usb 0003:413C:8162.0003: input,hidraw2: USB HID v1.11 Mouse [HID 413c:8162] on usb-0000:00:1a.0-1.1.2/input0 [ 8.981088] <30>udev[353]: starting version 167 [ 8.991981] Adding 7811068k swap on /dev/sda5. Priority:-1 extents:1 across:7811068k [ 9.026009] lp: driver loaded but no devices found [ 9.093265] type=1400 audit(1303088340.947:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=512 comm="apparmor_parser" [ 9.093932] type=1400 audit(1303088340.947:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=512 comm="apparmor_parser" [ 9.094370] type=1400 audit(1303088340.947:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=512 comm="apparmor_parser" [ 9.104837] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29) [ 9.104853] intel ips 0000:00:1f.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 9.104910] cfg80211: Calling CRDA to update world regulatory domain [ 9.104989] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled [ 9.112717] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90 [ 9.151339] [drm] Initialized drm 1.1.0 20060810 [ 9.167772] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro [ 9.182579] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 9.264301] cfg80211: World regulatory domain updated: [ 9.264305] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 9.264308] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.264311] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.264314] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.264318] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.264321] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.269285] input: Dell WMI hotkeys as /devices/virtual/input/input8 [ 9.280226] brcm80211: module is from the staging directory, the quality is unknown, you have been warned. [ 9.281363] VGA switcheroo: detected DSM switching method \_SB_.PCI0.P0P1.PEGP handle [ 9.281409] nouveau 0000:01:00.0: enabling device (0000 -> 0003) [ 9.281423] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.281432] nouveau 0000:01:00.0: setting latency timer to 64 [ 9.286088] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a8a80b1) [ 9.294559] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 9.294574] [drm] nouveau 0000:01:00.0: ... BIOS signature not found [ 9.294577] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM [ 9.294589] [drm] nouveau 0000:01:00.0: ... BIOS signature not found [ 9.294591] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PCIROM [ 9.294752] nouveau 0000:01:00.0: Invalid ROM contents [ 9.294823] [drm] nouveau 0000:01:00.0: ... BIOS signature not found [ 9.294826] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from ACPI [ 9.297048] Linux video capture interface: v2.00 [ 9.297102] brcm80211 0000:12:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 9.297110] brcm80211 0000:12:00.0: setting latency timer to 64 [ 9.301385] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:6421) [ 9.310405] input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/input/input9 [ 9.312403] Found chip type AI (0x13814313) [ 9.315661] Changing max_res_mask to 0xffff [ 9.315663] Changing min_res_mask to 0x200d [ 9.321764] Applying 4313 WARs [ 9.322728] wlc_bmac_attach:: deviceid 0x4727 nbands 1 board 0x10 macaddr: 1c:65:9d:88:eb:7a [ 9.322884] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 9.322887] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 9.322889] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 9.322891] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 9.322893] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 9.322895] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 9.322897] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 9.322900] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 9.322902] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 9.322904] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 9.322905] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 9.322908] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 9.322910] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 9.322913] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 9.322915] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 9.322917] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 9.322919] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 9.322922] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 9.322924] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 9.322927] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 9.322928] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 9.322931] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 9.322933] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 9.322935] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 9.322937] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 9.322939] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 9.322941] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 9.322943] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm) [ 9.340746] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 9.341242] wl_set_hint: Sending country code US to MAC80211 [ 9.341249] wl0: Broadcom BCM43xx 802.11 MAC80211 Driver (1.82.8.0) (Compiled at 03:42:00 on Apr 11 2011) [ 9.343027] lib80211: common routines for IEEE802.11 drivers [ 9.343030] lib80211_crypt: registered algorithm 'NULL' [ 9.345295] wl: module license 'MIXED/Proprietary' taints kernel. [ 9.345300] Disabling lock debugging due to kernel taint [ 9.346908] cfg80211: Calling CRDA for country: US [ 9.349637] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 9.349640] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 9.349642] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 9.349644] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 9.349646] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 9.349647] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 9.349649] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 9.349651] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 9.349652] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 9.349654] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 9.349655] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 9.349657] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 9.349658] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 9.349660] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 9.349662] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 9.349663] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 9.349665] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 9.349667] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 9.349668] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 9.349670] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 9.349671] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 9.349673] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 9.349674] cfg80211: Disabling freq 2467 MHz [ 9.349675] cfg80211: Disabling freq 2472 MHz [ 9.349676] cfg80211: Disabling freq 2484 MHz [ 9.349679] cfg80211: Regulatory domain changed to country: US [ 9.349680] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 9.349681] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 9.349683] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 9.349685] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.349686] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.349688] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.349690] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 9.366150] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 9.366239] HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 9.366276] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 9.397227] usbcore: registered new interface driver uvcvideo [ 9.397230] USB Video Class driver (v1.0.0) [ 9.487498] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 9.487602] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 9.487866] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.487874] i915 0000:00:02.0: setting latency timer to 64 [ 9.575371] type=1400 audit(1303088341.427:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=817 comm="apparmor_parser" [ 9.577425] type=1400 audit(1303088341.437:6): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=816 comm="apparmor_parser" [ 9.577507] type=1400 audit(1303088341.437:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=820 comm="apparmor_parser" [ 9.578288] type=1400 audit(1303088341.437:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=820 comm="apparmor_parser" [ 9.578550] type=1400 audit(1303088341.437:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=817 comm="apparmor_parser" [ 9.578958] type=1400 audit(1303088341.437:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=817 comm="apparmor_parser" [ 9.580552] type=1400 audit(1303088341.437:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=818 comm="apparmor_parser" [ 9.639364] ADDRCONF(NETDEV_UP): wlan0: link is not ready