[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-22-generic (buildd@palmer) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu9) ) #71-Ubuntu SMP Thu Jan 6 22:47:22 UTC 2011 (Ubuntu 2.6.31-22.71-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.2 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 0D0000000 mask FF8000000 write-combining [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009dc00 (usable) [ 0.000000] modified: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] modified: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 2f81a000 - 30033467 [ 0.000000] ACPI: RSDP 000f74f0 00014 (v00 Nvidia) [ 0.000000] ACPI: RSDT 3fff3000 00028 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 3fff3040 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 3fff30c0 04B6D (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 3fff0000 00040 [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008b0160] TEXT DATA BSS ==> [0000100000 - 00008b0160] [ 0.000000] #4 [002f81a000 - 0030033467] RAMDISK ==> [002f81a000 - 0030033467] [ 0.000000] #5 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] [ 0.000000] #6 [00008b1000 - 00008b4072] BRK ==> [00008b1000 - 00008b4072] [ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x0003fff0 [ 0.000000] On node 0 totalpages: 262013 [ 0.000000] free_area_init_node: node 0, pgdat c078ad40, node_mem_map c1000200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3949 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 272 pages used for memmap [ 0.000000] HighMem zone: 34530 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Found and enabled local APIC! [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c1805000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259965 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-22-generic root=UUID=14852f5e-f4ca-4547-865a-8529686ca068 ro vga=792 splash quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5242240 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003fff0) [ 0.000000] Memory: 1017200k/1048512k available (4584k kernel code, 30388k reserved, 2149k data, 544k init, 139208k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0794000 - 0xc081c000 ( 544 kB) [ 0.000000] .data : 0xc057a0f8 - 0xc0793848 (2149 kB) [ 0.000000] .text : 0xc0100000 - 0xc057a0f8 (4584 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1837.503 MHz processor. [ 0.000033] Console: colour dummy device 80x25 [ 0.000038] console [tty0] enabled [ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3675.00 BogoMIPS (lpj=7350012) [ 0.004038] Security Framework initialized [ 0.004071] AppArmor: AppArmor initialized [ 0.004080] Mount-cache hash table entries: 512 [ 0.004248] Initializing cgroup subsys ns [ 0.004253] Initializing cgroup subsys cpuacct [ 0.004259] Initializing cgroup subsys memory [ 0.004270] Initializing cgroup subsys devices [ 0.004273] Initializing cgroup subsys freezer [ 0.004276] Initializing cgroup subsys net_cls [ 0.004291] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004295] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004301] mce: CPU supports 4 MCE banks [ 0.004321] Performance Counters: AMD PMU driver. [ 0.004329] ... version: 0 [ 0.004331] ... bit width: 48 [ 0.004334] ... generic counters: 4 [ 0.004336] ... value mask: 0000ffffffffffff [ 0.004339] ... max period: 00007fffffffffff [ 0.004341] ... fixed-purpose counters: 0 [ 0.004344] ... counter mask: 000000000000000f [ 0.004349] Checking 'hlt' instruction... OK. [ 0.020539] SMP alternatives: switching to UP code [ 0.026457] Freeing SMP alternatives: 20k freed [ 0.026485] ACPI: Core revision 20090521 [ 0.034032] ACPI: setting ELCR to 0200 (from 1c20) [ 0.040068] weird, boot CPU (#0) not listed by the BIOS. [ 0.040073] SMP motherboard not detected. [ 0.044001] SMP disabled [ 0.044001] Brought up 1 CPUs [ 0.044001] Total of 1 processors activated (3675.00 BogoMIPS). [ 0.044001] CPU0 attaching NULL sched-domain. [ 0.044001] Booting paravirtualized kernel on bare hardware [ 0.044001] regulator: core version 0.5 [ 0.044001] Time: 2:37:17 Date: 01/13/11 [ 0.044001] NET: Registered protocol family 16 [ 0.044001] EISA bus registered [ 0.044001] ACPI: bus type pci registered [ 0.096354] PCI: PCI BIOS revision 2.10 entry at 0xfb4f0, last bus=2 [ 0.096358] PCI: Using configuration type 1 for base access [ 0.097559] bio: create slab at 0 [ 0.098527] ACPI: EC: Look up EC in DSDT [ 0.105987] ACPI: Interpreter enabled [ 0.105994] ACPI: (supports S0 S1 S3 S4 S5) [ 0.106025] ACPI: Using PIC for interrupt routing [ 0.114968] ACPI: No dock devices found. [ 0.115085] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.115137] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] [ 0.115155] pci 0000:00:00.0: nForce2 C1 Halt Disconnect fixup [ 0.115370] pci 0000:00:01.1: reg 10 io port: [0xc400-0xc41f] [ 0.115407] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.115412] pci 0000:00:01.1: PME# disabled [ 0.115446] pci 0000:00:02.0: reg 10 32bit mmio: [0xec080000-0xec080fff] [ 0.115483] pci 0000:00:02.0: supports D1 D2 [ 0.115486] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.115490] pci 0000:00:02.0: PME# disabled [ 0.115518] pci 0000:00:02.1: reg 10 32bit mmio: [0xec083000-0xec083fff] [ 0.115555] pci 0000:00:02.1: supports D1 D2 [ 0.115558] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.115562] pci 0000:00:02.1: PME# disabled [ 0.115597] pci 0000:00:02.2: reg 10 32bit mmio: [0xec086000-0xec0860ff] [ 0.115639] pci 0000:00:02.2: supports D1 D2 [ 0.115642] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.115647] pci 0000:00:02.2: PME# disabled [ 0.115683] pci 0000:00:04.0: reg 10 32bit mmio: [0xec087000-0xec087fff] [ 0.115690] pci 0000:00:04.0: reg 14 io port: [0xb000-0xb007] [ 0.115723] pci 0000:00:04.0: supports D1 D2 [ 0.115726] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.115730] pci 0000:00:04.0: PME# disabled [ 0.115758] pci 0000:00:05.0: reg 10 32bit mmio: [0xec000000-0xec07ffff] [ 0.115795] pci 0000:00:05.0: supports D1 D2 [ 0.115823] pci 0000:00:06.0: reg 10 io port: [0xb400-0xb4ff] [ 0.115830] pci 0000:00:06.0: reg 14 io port: [0xb800-0xb87f] [ 0.115837] pci 0000:00:06.0: reg 18 32bit mmio: [0xec081000-0xec081fff] [ 0.115866] pci 0000:00:06.0: supports D1 D2 [ 0.115934] pci 0000:00:09.0: reg 20 io port: [0xf000-0xf00f] [ 0.115986] pci 0000:00:0d.0: reg 10 32bit mmio: [0xec084000-0xec0847ff] [ 0.115993] pci 0000:00:0d.0: reg 14 32bit mmio: [0xec085000-0xec08503f] [ 0.116032] pci 0000:00:0d.0: supports D1 D2 [ 0.116035] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.116040] pci 0000:00:0d.0: PME# disabled [ 0.116130] pci 0000:01:08.0: reg 10 io port: [0x9000-0x9007] [ 0.116139] pci 0000:01:08.0: reg 14 io port: [0x9400-0x9403] [ 0.116148] pci 0000:01:08.0: reg 18 io port: [0x9800-0x9807] [ 0.116156] pci 0000:01:08.0: reg 1c io port: [0x9c00-0x9c03] [ 0.116165] pci 0000:01:08.0: reg 20 io port: [0xa000-0xa00f] [ 0.116173] pci 0000:01:08.0: reg 24 32bit mmio: [0xeb121000-0xeb1213ff] [ 0.116182] pci 0000:01:08.0: reg 30 32bit mmio: [0x000000-0x07ffff] [ 0.116203] pci 0000:01:08.0: supports D1 D2 [ 0.116243] pci 0000:01:09.0: reg 10 32bit mmio: [0xeb100000-0xeb11ffff] [ 0.116332] pci 0000:01:0a.0: reg 10 32bit mmio: [0xeb120000-0xeb120fff] [ 0.116340] pci 0000:01:0a.0: reg 14 io port: [0xa400-0xa43f] [ 0.116349] pci 0000:01:0a.0: reg 18 32bit mmio: [0xeb000000-0xeb0fffff] [ 0.116389] pci 0000:01:0a.0: supports D1 D2 [ 0.116392] pci 0000:01:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.116397] pci 0000:01:0a.0: PME# disabled [ 0.116435] pci 0000:00:08.0: bridge io port: [0x9000-0xafff] [ 0.116441] pci 0000:00:08.0: bridge 32bit mmio: [0xea000000-0xebffffff] [ 0.116478] pci 0000:02:00.0: reg 10 32bit mmio: [0xe8000000-0xe8ffffff] [ 0.116486] pci 0000:02:00.0: reg 14 32bit mmio: [0xd8000000-0xdfffffff] [ 0.116493] pci 0000:02:00.0: reg 18 32bit mmio: [0xe0000000-0xe007ffff] [ 0.116510] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.116567] pci 0000:00:1e.0: bridge 32bit mmio: [0xe8000000-0xe9ffffff] [ 0.116572] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xd8000000-0xe7ffffff] [ 0.116583] pci_bus 0000:00: on NUMA node 0 [ 0.116590] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.116802] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.117036] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [ 0.181778] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.181957] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.182134] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.182310] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.182484] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.182659] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.182834] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.183011] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 *12 14 15) [ 0.183187] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 *12 14 15) [ 0.183362] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.183537] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.183712] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.183887] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.184072] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.184248] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.184424] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.184581] ACPI: PCI Interrupt Link [APC1] (IRQs *16) [ 0.184721] ACPI: PCI Interrupt Link [APC2] (IRQs *17) [ 0.184861] ACPI: PCI Interrupt Link [APC3] (IRQs *18) [ 0.184999] ACPI: PCI Interrupt Link [APC4] (IRQs *19) [ 0.185138] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 0.185341] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled. [ 0.185543] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled. [ 0.185745] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0 [ 0.185945] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0 [ 0.186145] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0 [ 0.186344] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. [ 0.186486] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled. [ 0.186686] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled. [ 0.186893] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0 [ 0.187094] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. [ 0.187295] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. [ 0.187556] SCSI subsystem initialized [ 0.187646] libata version 3.00 loaded. [ 0.187759] usbcore: registered new interface driver usbfs [ 0.187776] usbcore: registered new interface driver hub [ 0.187813] usbcore: registered new device driver usb [ 0.187982] ACPI: WMI: Mapper loaded [ 0.187985] PCI: Using ACPI for IRQ routing [ 0.188174] Bluetooth: Core ver 2.15 [ 0.188214] NET: Registered protocol family 31 [ 0.188217] Bluetooth: HCI device and connection manager initialized [ 0.188221] Bluetooth: HCI socket layer initialized [ 0.188223] NetLabel: Initializing [ 0.188226] NetLabel: domain hash size = 128 [ 0.188228] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.188245] NetLabel: unlabeled traffic allowed by default [ 0.190756] pnp: PnP ACPI init [ 0.190780] ACPI: bus type pnp registered [ 0.196698] pnp: PnP ACPI: found 15 devices [ 0.196701] ACPI: ACPI bus type pnp unregistered [ 0.196706] PnPBIOS: Disabled by ACPI PNP [ 0.196721] system 00:00: ioport range 0x4000-0x407f has been reserved [ 0.196725] system 00:00: ioport range 0x4080-0x40ff has been reserved [ 0.196729] system 00:00: ioport range 0x4400-0x447f has been reserved [ 0.196733] system 00:00: ioport range 0x4480-0x44ff has been reserved [ 0.196737] system 00:00: ioport range 0x4200-0x427f has been reserved [ 0.196741] system 00:00: ioport range 0x4280-0x42ff has been reserved [ 0.196748] system 00:01: ioport range 0x5000-0x503f has been reserved [ 0.196756] system 00:02: iomem range 0xdb000-0xdbfff has been reserved [ 0.196760] system 00:02: iomem range 0xf0000-0xf7fff could not be reserved [ 0.196764] system 00:02: iomem range 0xf8000-0xfbfff could not be reserved [ 0.196768] system 00:02: iomem range 0xfc000-0xfffff could not be reserved [ 0.196773] system 00:02: iomem range 0x3fff0000-0x3fffffff could not be reserved [ 0.196777] system 00:02: iomem range 0xffff0000-0xffffffff has been reserved [ 0.196781] system 00:02: iomem range 0x0-0x9ffff could not be reserved [ 0.196785] system 00:02: iomem range 0x100000-0x3ffeffff could not be reserved [ 0.196789] system 00:02: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.196794] system 00:02: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.196801] system 00:04: ioport range 0xb78-0xb7b has been reserved [ 0.196805] system 00:04: ioport range 0xf78-0xf7b has been reserved [ 0.196809] system 00:04: ioport range 0xa78-0xa7b has been reserved [ 0.196813] system 00:04: ioport range 0xe78-0xe7b has been reserved [ 0.196817] system 00:04: ioport range 0xbbc-0xbbf has been reserved [ 0.196821] system 00:04: ioport range 0xfbc-0xfbf has been reserved [ 0.196825] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 0.196828] system 00:04: ioport range 0x294-0x297 has been reserved [ 0.196832] system 00:04: ioport range 0x4e0-0x4e7 has been reserved [ 0.231536] AppArmor: AppArmor Filesystem Enabled [ 0.231568] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 [ 0.231572] pci 0000:00:08.0: IO window: 0x9000-0xafff [ 0.231579] pci 0000:00:08.0: MEM window: 0xea000000-0xebffffff [ 0.231585] pci 0000:00:08.0: PREFETCH window: 0x40000000-0x400fffff [ 0.231591] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.231594] pci 0000:00:1e.0: IO window: disabled [ 0.231599] pci 0000:00:1e.0: MEM window: 0xe8000000-0xe9ffffff [ 0.231604] pci 0000:00:1e.0: PREFETCH window: 0xd8000000-0xe7ffffff [ 0.231616] pci 0000:00:08.0: setting latency timer to 64 [ 0.231626] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.231630] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.231634] pci_bus 0000:01: resource 0 io: [0x9000-0xafff] [ 0.231637] pci_bus 0000:01: resource 1 mem: [0xea000000-0xebffffff] [ 0.231641] pci_bus 0000:01: resource 2 pref mem [0x40000000-0x400fffff] [ 0.231645] pci_bus 0000:02: resource 1 mem: [0xe8000000-0xe9ffffff] [ 0.231648] pci_bus 0000:02: resource 2 pref mem [0xd8000000-0xe7ffffff] [ 0.231693] NET: Registered protocol family 2 [ 0.231810] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.232284] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.233761] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.234378] TCP: Hash tables configured (established 131072 bind 65536) [ 0.234382] TCP reno registered [ 0.234504] NET: Registered protocol family 1 [ 0.234593] Trying to unpack rootfs image as initramfs... [ 0.501052] Freeing initrd memory: 8293k freed [ 0.510187] cpufreq-nforce2: Detected nForce2 chipset revision A2 [ 0.510192] cpufreq-nforce2: FSB changing is maybe unstable and can lead to crashes and data loss. [ 0.510203] cpufreq-nforce2: FSB currently at 167 MHz, FID 11.0 [ 0.510257] Scanning for low memory corruption every 60 seconds [ 0.510403] audit: initializing netlink socket (disabled) [ 0.510423] type=2000 audit(1294886237.508:1): initialized [ 0.520390] highmem bounce pool size: 64 pages [ 0.520398] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.522304] VFS: Disk quotas dquot_6.5.2 [ 0.522378] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.523044] fuse init (API version 7.12) [ 0.523143] msgmni has been set to 1731 [ 0.523389] alg: No test for stdrng (krng) [ 0.523407] io scheduler noop registered [ 0.523410] io scheduler anticipatory registered [ 0.523413] io scheduler deadline registered [ 0.523463] io scheduler cfq registered (default) [ 0.576077] pci 0000:01:0a.0: Firmware left e100 interrupts enabled; disabling [ 0.576091] pci 0000:02:00.0: Boot video device [ 0.576205] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.576237] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.576395] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.576400] ACPI: Power Button [PWRF] [ 0.576462] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.576467] ACPI: Power Button [PWRB] [ 0.576534] fan PNP0C0B:00: registered as cooling_device0 [ 0.576541] ACPI: Fan [FAN] (on) [ 0.576953] processor LNXCPU:00: registered as cooling_device1 [ 0.581916] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.581925] ACPI: Thermal Zone [THRM] (33 C) [ 0.581985] isapnp: Scanning for PnP cards... [ 0.748036] Switched to high resolution mode on CPU 0 [ 0.936272] isapnp: No Plug & Play device found [ 0.937604] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.937747] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.937853] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.938182] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.938319] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.939567] brd: module loaded [ 0.940162] loop: module loaded [ 0.940264] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.940443] sata_sil 0000:01:08.0: version 2.4 [ 0.940850] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11 [ 0.940855] PCI: setting IRQ 11 as level-triggered [ 0.940861] sata_sil 0000:01:08.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11 [ 0.940894] sata_sil 0000:01:08.0: Applying R_ERR on DMA activate FIS errata fix [ 0.941018] scsi0 : sata_sil [ 0.941143] scsi1 : sata_sil [ 0.941213] scsi2 : sata_sil [ 0.941289] scsi3 : sata_sil [ 0.941343] ata1: SATA max UDMA/100 mmio m1024@0xeb121000 tf 0xeb121080 irq 11 [ 0.941348] ata2: SATA max UDMA/100 mmio m1024@0xeb121000 tf 0xeb1210c0 irq 11 [ 0.941353] ata3: SATA max UDMA/100 mmio m1024@0xeb121000 tf 0xeb121280 irq 11 [ 0.941358] ata4: SATA max UDMA/100 mmio m1024@0xeb121000 tf 0xeb1212c0 irq 11 [ 0.941524] pata_amd 0000:00:09.0: version 0.4.1 [ 0.941584] pata_amd 0000:00:09.0: setting latency timer to 64 [ 0.941684] scsi4 : pata_amd [ 0.941778] scsi5 : pata_amd [ 0.942847] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.942852] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.943699] Fixed MDIO Bus: probed [ 0.943751] PPP generic driver version 2.4.2 [ 0.943894] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.944199] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 10 [ 0.944203] PCI: setting IRQ 10 as level-triggered [ 0.944209] ehci_hcd 0000:00:02.2: PCI INT C -> Link[LUB2] -> GSI 10 (level, low) -> IRQ 10 [ 0.944225] ehci_hcd 0000:00:02.2: setting latency timer to 64 [ 0.944229] ehci_hcd 0000:00:02.2: EHCI Host Controller [ 0.944272] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 [ 0.944315] ehci_hcd 0000:00:02.2: selective suspend/wakeup unavailable [ 0.944324] ehci_hcd 0000:00:02.2: debug port 1 [ 0.944330] ehci_hcd 0000:00:02.2: cache line size of 64 is not supported [ 0.944340] ehci_hcd 0000:00:02.2: irq 10, io mem 0xec086000 [ 0.956010] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00 [ 0.956116] usb usb1: configuration #1 chosen from 1 choice [ 0.956160] hub 1-0:1.0: USB hub found [ 0.956174] hub 1-0:1.0: 6 ports detected [ 0.956241] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.956518] ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 11 [ 0.956524] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUBA] -> GSI 11 (level, low) -> IRQ 11 [ 0.956535] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.956539] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.956578] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.956598] ohci_hcd 0000:00:02.0: irq 11, io mem 0xec080000 [ 1.014073] usb usb2: configuration #1 chosen from 1 choice [ 1.014106] hub 2-0:1.0: USB hub found [ 1.014119] hub 2-0:1.0: 3 ports detected [ 1.014423] ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 10 [ 1.014428] ohci_hcd 0000:00:02.1: PCI INT B -> Link[LUBB] -> GSI 10 (level, low) -> IRQ 10 [ 1.014439] ohci_hcd 0000:00:02.1: setting latency timer to 64 [ 1.014443] ohci_hcd 0000:00:02.1: OHCI Host Controller [ 1.014488] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 [ 1.014505] ohci_hcd 0000:00:02.1: irq 10, io mem 0xec083000 [ 1.070067] usb usb3: configuration #1 chosen from 1 choice [ 1.070100] hub 3-0:1.0: USB hub found [ 1.070113] hub 3-0:1.0: 3 ports detected [ 1.070169] uhci_hcd: USB Universal Host Controller Interface driver [ 1.070281] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.070285] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.070622] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.070704] mice: PS/2 mouse device common for all mice [ 1.070809] rtc_cmos 00:06: RTC can wake from S4 [ 1.070860] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 1.070881] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 1.070971] device-mapper: uevent: version 1.0.3 [ 1.071082] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.071191] device-mapper: multipath: version 1.1.0 loaded [ 1.071200] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.071347] EISA: Probing bus 0 at eisa.0 [ 1.071370] Cannot allocate resource for EISA slot 4 [ 1.071373] Cannot allocate resource for EISA slot 5 [ 1.071389] EISA: Detected 0 cards. [ 1.071466] cpuidle: using governor ladder [ 1.071469] cpuidle: using governor menu [ 1.072086] TCP cubic registered [ 1.072282] NET: Registered protocol family 10 [ 1.072800] lo: Disabled Privacy Extensions [ 1.073186] NET: Registered protocol family 17 [ 1.073209] Bluetooth: L2CAP ver 2.13 [ 1.073212] Bluetooth: L2CAP socket layer initialized [ 1.073215] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.073217] Bluetooth: SCO socket layer initialized [ 1.073255] Bluetooth: RFCOMM TTY layer initialized [ 1.073260] Bluetooth: RFCOMM socket layer initialized [ 1.073262] Bluetooth: RFCOMM ver 1.11 [ 1.073278] powernow-k8: Processor cpuid 6a0 not supported [ 1.073298] Using IPI No-Shortcut mode [ 1.073382] PM: Resume from disk failed. [ 1.073400] registered taskstats version 1 [ 1.073554] Magic number: 11:733:611 [ 1.073666] rtc_cmos 00:06: setting system clock to 2011-01-13 02:37:18 UTC (1294886238) [ 1.073671] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.073673] EDD information not available. [ 1.108459] ata5.00: ATA-7: SAMSUNG SP1604N, TM100-24, max UDMA/133 [ 1.108464] ata5.00: 312581808 sectors, multi 16: LBA48 [ 1.108494] ata5: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc700c000) ACPI=0x7f01f (15:600:0x13) [ 1.109494] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.116378] ata5.00: configured for UDMA/133 [ 1.260037] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 1.462019] ata1.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133 [ 1.462024] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.476495] ata1.00: configured for UDMA/100 [ 1.476648] scsi 0:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5 [ 1.476815] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.476871] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.476944] sd 0:0:0:0: [sda] Write Protect is off [ 1.476948] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.476985] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.477170] sda: sda1 sda2 [ 1.479604] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.516013] usb 2-1: new low speed USB device using ohci_hcd and address 2 [ 1.740118] usb 2-1: configuration #1 chosen from 1 choice [ 1.796036] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 2.182789] ata2.00: ATA-8: WDC WD10EACS-00ZJB0, 01.01B01, max UDMA/133 [ 2.182793] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.196542] ata2.00: configured for UDMA/100 [ 2.196634] scsi 1:0:0:0: Direct-Access ATA WDC WD10EACS-00Z 01.0 PQ: 0 ANSI: 5 [ 2.196768] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.196814] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.196882] sd 1:0:0:0: [sdb] Write Protect is off [ 2.196887] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.196923] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.197087] sdb: sdb1 sdb2 [ 2.199867] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.516036] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 2.988292] ata3.00: ATA-8: WDC WD10EACS-00D6B0, 01.01A01, max UDMA/133 [ 2.988297] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.004576] ata3.00: configured for UDMA/100 [ 3.004665] scsi 2:0:0:0: Direct-Access ATA WDC WD10EACS-00D 01.0 PQ: 0 ANSI: 5 [ 3.004806] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 3.004857] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.004927] sd 2:0:0:0: [sdc] Write Protect is off [ 3.004931] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.004967] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.005131] sdc: sdc1 sdc2 [ 3.017091] sd 2:0:0:0: [sdc] Attached SCSI disk [ 3.324036] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 3.649698] ata4.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133 [ 3.649703] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.664842] ata4.00: configured for UDMA/100 [ 3.664927] scsi 3:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5 [ 3.665059] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 3.665105] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.665172] sd 3:0:0:0: [sdd] Write Protect is off [ 3.665176] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.665212] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.665375] sdd: [ 3.665529] scsi 4:0:0:0: Direct-Access ATA SAMSUNG SP1604N TM10 PQ: 0 ANSI: 5 [ 3.665656] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 3.665701] sd 4:0:0:0: [sde] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 3.665771] sd 4:0:0:0: [sde] Write Protect is off [ 3.665775] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 3.665811] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.665975] sde: sdd1 sdd2 [ 3.667592] sd 3:0:0:0: [sdd] Attached SCSI disk [ 3.686903] sde1 sde2 sde3 sde4 [ 3.702697] sd 4:0:0:0: [sde] Attached SCSI disk [ 3.836416] ata6.00: ATAPI: TOSHIBA DVD-ROM SD-M1712, J004, max UDMA/33 [ 3.836452] ata6.01: ATAPI: IOMEGA ZIP 100 ATAPI, 14.A, max PIO2, CDB intr [ 3.836482] ata6: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc700c000) ACPI=0x701f (60:600:0x13) [ 3.836488] ata6: nv_mode_filter: 0x7&0xfff9f->0x7, BIOS=0x0 (0xc700c000) ACPI=0x1 (60:600:0x13) [ 3.852359] ata6.00: configured for UDMA/33 [ 3.868332] ata6.01: configured for PIO2 [ 3.876543] scsi 5:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-M1712 J004 PQ: 0 ANSI: 5 [ 3.883183] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 3.883188] Uniform CD-ROM driver Revision: 3.20 [ 3.883278] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 3.883339] sr 5:0:0:0: Attached scsi generic sg5 type 5 [ 3.887683] scsi 5:0:1:0: Direct-Access IOMEGA ZIP 100 14.A PQ: 0 ANSI: 5 [ 3.887820] sd 5:0:1:0: Attached scsi generic sg6 type 0 [ 3.891449] sd 5:0:1:0: [sdf] Attached SCSI removable disk [ 3.891473] Freeing unused kernel memory: 544k freed [ 3.892130] Write protecting the kernel text: 4588k [ 3.892169] Write protecting the kernel read-only data: 1840k [ 4.127679] Linux agpgart interface v0.103 [ 4.130576] agpgart: Detected NVIDIA nForce2 chipset [ 4.180847] agpgart-nvidia 0000:00:00.0: AGP aperture is 128M @ 0xd0000000 [ 4.180907] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 4.181229] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 12 [ 4.181233] PCI: setting IRQ 12 as level-triggered [ 4.181240] forcedeth 0000:00:04.0: PCI INT A -> Link[LMAC] -> GSI 12 (level, low) -> IRQ 12 [ 4.181247] forcedeth 0000:00:04.0: setting latency timer to 64 [ 4.181295] nv_probe: set workaround bit for reversed mac addr [ 4.209624] Floppy drive(s): fd0 is 1.44M [ 4.215180] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 4.215184] e100: Copyright(c) 1999-2006 Intel Corporation [ 4.215545] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 5 [ 4.215549] PCI: setting IRQ 5 as level-triggered [ 4.215556] e100 0000:01:0a.0: PCI INT A -> Link[LNK3] -> GSI 5 (level, low) -> IRQ 5 [ 4.236337] e100 0000:01:0a.0: PME# disabled [ 4.242640] FDC 0 is a post-1991 82077 [ 4.322024] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI [ 4.322029] Copyright (c) 1999-2006 Intel Corporation. [ 4.338543] usbcore: registered new interface driver hiddev [ 4.370908] input: Microsoft Microsoft IntelliMouse® Explorer as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input4 [ 4.371026] generic-usb 0003:045E:001E.0001: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb-0000:00:02.0-1/input0 [ 4.371053] usbcore: registered new interface driver usbhid [ 4.371057] usbhid: v2.6:USB HID core driver [ 4.394273] e100: eth0: e100_probe: addr 0xeb120000, irq 5, MAC addr 00:d0:b7:15:7b:08 [ 4.395218] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10 [ 4.395225] e1000 0000:01:09.0: PCI INT A -> Link[LNK2] -> GSI 10 (level, low) -> IRQ 10 [ 4.634089] e1000: 0000:01:09.0: e1000_probe: (PCI:33MHz:32-bit) 00:03:47:e1:c9:3b [ 4.765219] forcedeth 0000:00:04.0: ifname eth1, PHY OUI 0x732 @ 1, addr 00:04:61:46:2f:ac [ 4.765227] forcedeth 0000:00:04.0: timirq lnktim desc-v1 [ 4.773707] ACPI: PCI Interrupt Link [LFIR] enabled at IRQ 5 [ 4.773716] ohci1394 0000:00:0d.0: PCI INT A -> Link[LFIR] -> GSI 5 (level, low) -> IRQ 5 [ 4.773723] ohci1394 0000:00:0d.0: setting latency timer to 64 [ 4.781175] e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection [ 4.808509] md: bind [ 4.830233] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[ec084000-ec0847ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 4.836777] md: bind [ 4.885999] md: bind [ 5.008326] md: bind [ 5.011753] xor: automatically using best checksumming function: pIII_sse [ 5.028005] pIII_sse : 2820.000 MB/sec [ 5.028009] xor: using function: pIII_sse (2820.000 MB/sec) [ 5.031583] async_tx: api initialized (async) [ 5.100040] raid6: int32x1 720 MB/s [ 5.168019] raid6: int32x2 701 MB/s [ 5.236085] raid6: int32x4 506 MB/s [ 5.304025] raid6: int32x8 475 MB/s [ 5.372032] raid6: mmxx1 1493 MB/s [ 5.440026] raid6: mmxx2 2488 MB/s [ 5.508011] raid6: sse1x1 1385 MB/s [ 5.576019] raid6: sse1x2 2221 MB/s [ 5.576022] raid6: using algorithm sse1x2 (2221 MB/s) [ 5.581413] md: raid6 personality registered for level 6 [ 5.581418] md: raid5 personality registered for level 5 [ 5.581421] md: raid4 personality registered for level 4 [ 5.581622] raid5: device sdd1 operational as raid disk 3 [ 5.581626] raid5: device sdb1 operational as raid disk 1 [ 5.581630] raid5: device sda1 operational as raid disk 0 [ 5.581633] raid5: device sdc1 operational as raid disk 2 [ 5.582153] raid5: allocated 4221kB for md0 [ 5.582204] raid5: raid level 5 set md0 active with 4 out of 4 devices, algorithm 2 [ 5.582208] RAID5 conf printout: [ 5.582210] --- rd:4 wd:4 [ 5.582213] disk 0, o:1, dev:sda1 [ 5.582216] disk 1, o:1, dev:sdb1 [ 5.582218] disk 2, o:1, dev:sdc1 [ 5.582221] disk 3, o:1, dev:sdd1 [ 5.582264] md0: detected capacity change from 0 to 2999816945664 [ 5.584536] md0: unknown partition table [ 5.679722] vesafb: framebuffer at 0xd8000000, mapped to 0xf8280000, using 3072k, total 3072k [ 5.679728] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 5.679732] vesafb: scrolling: redraw [ 5.679736] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 5.679803] fb0: VESA VGA frame buffer device [ 5.686820] Console: switching to colour frame buffer device 128x48 [ 5.840011] spurious 8259A interrupt: IRQ7. [ 5.947564] ohci1394: fw-host0: SelfID received outside of bus reset sequence [ 6.105986] device-mapper: dm-raid45: initialized v0.2594b [ 6.115491] md: linear personality registered for level -1 [ 6.119352] md: multipath personality registered for level -4 [ 6.122684] md: raid0 personality registered for level 0 [ 6.127694] md: raid1 personality registered for level 1 [ 6.172040] md: raid10 personality registered for level 10 [ 6.228175] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0004610000026614] [ 6.658905] PM: Starting manual resume from disk [ 6.658910] PM: Resume from partition 8:67 [ 6.658913] PM: Checking hibernation image. [ 6.659111] PM: Resume from disk failed. [ 6.679251] kjournald starting. Commit interval 5 seconds [ 6.679265] EXT3-fs: mounted filesystem with ordered data mode. [ 7.510719] type=1505 audit(1294886244.934:2): operation="profile_load" pid=494 name=/usr/share/gdm/guest-session/Xsession [ 7.536769] type=1505 audit(1294886244.962:3): operation="profile_load" pid=495 name=/sbin/dhclient3 [ 7.537132] type=1505 audit(1294886244.962:4): operation="profile_load" pid=495 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 7.537341] type=1505 audit(1294886244.962:5): operation="profile_load" pid=495 name=/usr/lib/connman/scripts/dhclient-script [ 7.610091] type=1505 audit(1294886245.034:6): operation="profile_load" pid=496 name=/usr/bin/evince [ 7.616462] type=1505 audit(1294886245.042:7): operation="profile_load" pid=496 name=/usr/bin/evince-previewer [ 7.620318] type=1505 audit(1294886245.046:8): operation="profile_load" pid=496 name=/usr/bin/evince-thumbnailer [ 7.675503] type=1505 audit(1294886245.098:9): operation="profile_load" pid=498 name=/usr/bin/freshclam [ 7.699979] type=1505 audit(1294886245.122:10): operation="profile_load" pid=499 name=/usr/lib/cups/backend/cups-pdf [ 7.700443] type=1505 audit(1294886245.126:11): operation="profile_load" pid=499 name=/usr/sbin/cupsd [ 25.659959] udev: starting version 147 [ 25.698173] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000 [ 25.698199] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5040 [ 25.898753] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 25.980342] parport_pc 00:0c: reported by Plug and Play ACPI [ 25.980463] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 26.107396] Adding 257000k swap on /dev/sda2. Priority:-1 extents:1 across:257000k [ 26.111541] lp: driver loaded but no devices found [ 26.181623] lp0: using parport0 (interrupt-driven). [ 26.182798] Adding 257000k swap on /dev/sdb2. Priority:-2 extents:1 across:257000k [ 26.358452] nvidia: module license 'NVIDIA' taints kernel. [ 26.358457] Disabling lock debugging due to kernel taint [ 26.710369] ppdev: user-space parallel port driver [ 26.724755] Adding 257000k swap on /dev/sdc2. Priority:-3 extents:1 across:257000k [ 26.751992] gameport: NS558 PnP Gameport is pnp00:0e/gameport0, io 0x200, speed 59659kHz [ 26.776729] ip_tables: (C) 2000-2006 Netfilter Core Team [ 26.820299] Adding 257000k swap on /dev/sdd2. Priority:-4 extents:1 across:257000k [ 26.863665] Adding 1052248k swap on /dev/sde3. Priority:-5 extents:1 across:1052248k [ 27.016039] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 10 [ 27.016046] Intel ICH 0000:00:06.0: PCI INT A -> Link[LACI] -> GSI 10 (level, low) -> IRQ 10 [ 27.016080] Intel ICH 0000:00:06.0: setting latency timer to 64 [ 27.078014] ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 11 [ 27.078022] nvidia 0000:02:00.0: PCI INT A -> Link[LNK4] -> GSI 11 (level, low) -> IRQ 11 [ 27.078493] NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.13 Thu Jun 25 18:42:21 PDT 2009 [ 27.138763] EXT3 FS on sde2, internal journal [ 27.372019] intel8x0_measure_ac97_clock: measured 52576 usecs (2552 samples) [ 27.372024] intel8x0: clocking to 47466 [ 27.915279] kjournald starting. Commit interval 5 seconds [ 27.915522] EXT3 FS on sde4, internal journal [ 27.915529] EXT3-fs: mounted filesystem with ordered data mode. [ 28.243008] __ratelimit: 6 callbacks suppressed [ 28.243013] type=1505 audit(1294882665.666:14): operation="profile_replace" pid=1165 name=/usr/share/gdm/guest-session/Xsession [ 28.245305] type=1505 audit(1294882665.670:15): operation="profile_replace" pid=1166 name=/sbin/dhclient3 [ 28.245671] type=1505 audit(1294882665.670:16): operation="profile_replace" pid=1166 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 28.245879] type=1505 audit(1294882665.670:17): operation="profile_replace" pid=1166 name=/usr/lib/connman/scripts/dhclient-script [ 28.256701] eth1: no link during initialization. [ 28.257204] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 28.295992] ADDRCONF(NETDEV_UP): eth2: link is not ready [ 28.310085] e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 28.325045] type=1505 audit(1294882665.750:18): operation="profile_replace" pid=1167 name=/usr/bin/evince [ 28.331456] type=1505 audit(1294882665.754:19): operation="profile_replace" pid=1167 name=/usr/bin/evince-previewer [ 28.377415] type=1505 audit(1294882665.802:20): operation="profile_replace" pid=1167 name=/usr/bin/evince-thumbnailer [ 28.408937] type=1505 audit(1294882665.834:21): operation="profile_replace" pid=1181 name=/usr/bin/freshclam [ 28.411329] type=1505 audit(1294882665.834:22): operation="profile_replace" pid=1182 name=/usr/lib/cups/backend/cups-pdf [ 28.411789] type=1505 audit(1294882665.834:23): operation="profile_replace" pid=1182 name=/usr/sbin/cupsd [ 28.470445] e100 0000:01:0a.0: firmware: requesting e100/d101m_ucode.bin [ 28.501479] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 28.505330] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready