[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.2.0-16-generic (buildd@lgw01-22) (gcc version 5.2.1 20151003 (Ubuntu 5.2.1-21ubuntu2) ) #19-Ubuntu SMP Thu Oct 8 14:46:51 UTC 2015 (Ubuntu 4.2.0-16.19-generic 4.2.3) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000baabefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000baabf000-0x00000000baebefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000baebf000-0x00000000bafbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bafbf000-0x00000000baffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: LENOVO Lenovo G580/Product Name, BIOS 5ECN33WW(V2.03) 06/06/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x13f600 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0BB000000 mask FFF000000 uncachable [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 5 base 100000000 mask FC0000000 write-back [ 0.000000] 6 base 13F600000 mask FFFE00000 uncachable [ 0.000000] 7 base 13F800000 mask FFF800000 uncachable [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [c00fe1b0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x021fffff] [ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff] [ 0.000000] [mem 0x37800000-0x379fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x377fffff] [ 0.000000] [mem 0x20200000-0x377fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff] [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k [ 0.000000] BRK [0x01cdc000, 0x01cdcfff] PGTABLE [ 0.000000] BRK [0x01cdd000, 0x01cddfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3410a000-0x3607cfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 0x00000000BAFFE210 000094 (v01 LENOVO CB-01 00000001 01000013) [ 0.000000] ACPI: FACP 0x00000000BAFFB000 0000F4 (v04 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: DSDT 0x00000000BAFEE000 009755 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: FACS 0x00000000BAFBB000 000040 [ 0.000000] ACPI: FACS 0x00000000BAFBB000 000040 [ 0.000000] ACPI: UEFI 0x00000000BAFFD000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: ASF! 0x00000000BAFFC000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: HPET 0x00000000BAFFA000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: APIC 0x00000000BAFF9000 00008C (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: MCFG 0x00000000BAFF8000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: SLIC 0x00000000BAFED000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x00000000BAFEC000 0006FE (v01 LENOVO CB-01 00001000 ACPI 00040000) [ 0.000000] ACPI: BOOT 0x00000000BAFEA000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: ASPT 0x00000000BAFE5000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: FPDT 0x00000000BAFE3000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x00000000BAFE2000 000968 (v01 LENOVO CB-01 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x00000000BAFE1000 000A92 (v01 LENOVO CB-01 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x00000000BAFDF000 001EDD (v01 LENOVO CB-01 00001000 ACPI 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 4218MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x0000000037bfdfff] [ 0.000000] HighMem [mem 0x0000000037bfe000-0x000000013f5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.000000] node 0: [mem 0x0000000020200000-0x0000000040003fff] [ 0.000000] node 0: [mem 0x0000000040005000-0x00000000baabefff] [ 0.000000] node 0: [mem 0x00000000bafff000-0x00000000baffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000013f5fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013f5fffff] [ 0.000000] On node 0 totalpages: 1023579 [ 0.000000] DMA zone: 40 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] Normal zone: 2190 pages used for memmap [ 0.000000] Normal zone: 223742 pages, LIFO batch:31 [ 0.000000] HighMem zone: 795841 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Reserving Intel graphics stolen memory at 0xbba00000-0xbf9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] e820: [mem 0xbfa00000-0xefffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 19 pages/cpu @f623f000 s47116 r0 d30708 u77824 [ 0.000000] pcpu-alloc: s47116 r0 d30708 u77824 alloc=19*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1021349 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-16-generic root=UUID=cbd67302-16dc-4cbc-a789-049f18029054 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] microcode: CPU0 microcode updated early to revision 0x1b, date = 2014-05-29 [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00037bfe:0013f600) [ 0.000000] Initializing Movable for node 0 (00000000:00000000) [ 0.000000] Memory: 4006340K/4094316K available (7574K kernel code, 738K rwdata, 3020K rodata, 928K init, 796K bss, 87976K reserved, 0K cma-reserved, 3183364K highmem) [ 0.000000] virtual kernel memory layout: fixmap : 0xfff15000 - 0xfffff000 ( 936 kB) pkmap : 0xffc00000 - 0xffe00000 (2048 kB) vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) .init : 0xc1b14000 - 0xc1bfc000 ( 928 kB) .data : 0xc1765bf0 - 0xc1b12a40 (3763 kB) .text : 0xc1000000 - 0xc1765bf0 (7574 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:2304 nr_irqs:488 16 [ 0.000000] CPU 0 irqstacks, hard=f2c3a000 soft=f2c3c000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2494.232 MHz processor [ 0.000033] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.46 BogoMIPS (lpj=9976928) [ 0.000036] pid_max: default: 32768 minimum: 301 [ 0.000039] ACPI: Core revision 20150619 [ 0.008153] ACPI: All ACPI Tables successfully acquired [ 0.008166] Security Framework initialized [ 0.008175] AppArmor: AppArmor initialized [ 0.008176] Yama: becoming mindful. [ 0.008207] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.008209] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.008360] Initializing cgroup subsys blkio [ 0.008362] Initializing cgroup subsys memory [ 0.008367] Initializing cgroup subsys devices [ 0.008369] Initializing cgroup subsys freezer [ 0.008371] Initializing cgroup subsys net_cls [ 0.008373] Initializing cgroup subsys perf_event [ 0.008375] Initializing cgroup subsys net_prio [ 0.008377] Initializing cgroup subsys hugetlb [ 0.008397] CPU: Physical Processor ID: 0 [ 0.008398] CPU: Processor Core ID: 0 [ 0.008402] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.008403] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.009121] mce: CPU supports 7 MCE banks [ 0.009131] CPU0: Thermal monitoring enabled (TM1) [ 0.009137] process: using mwait in idle threads [ 0.009141] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.009142] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.009653] Freeing SMP alternatives memory: 28K (c1bfc000 - c1c03000) [ 0.023598] ftrace: allocating 30215 entries in 60 pages [ 0.035856] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.036281] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.076013] TSC deadline timer enabled [ 0.076016] smpboot: CPU0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz (fam: 06, model: 3a, stepping: 09) [ 0.076041] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver. [ 0.076060] ... version: 3 [ 0.076061] ... bit width: 48 [ 0.076062] ... generic registers: 4 [ 0.076063] ... value mask: 0000ffffffffffff [ 0.076064] ... max period: 0000ffffffffffff [ 0.076065] ... fixed-purpose events: 3 [ 0.076066] ... event mask: 000000070000000f [ 0.076844] CPU 1 irqstacks, hard=f2d94000 soft=f2d96000 [ 0.076846] x86: Booting SMP configuration: [ 0.076847] .... node #0, CPUs: #1 [ 0.077850] Initializing CPU#1 [ 0.080772] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.080850] CPU 2 irqstacks, hard=f2f0c000 soft=f2f0e000 [ 0.080851] #2 [ 0.081955] microcode: CPU2 microcode updated early to revision 0x1b, date = 2014-05-29 [ 0.081956] Initializing CPU#2 [ 0.084838] CPU 3 irqstacks, hard=f2f50000 soft=f2f52000 [ 0.084841] #3 [ 0.085942] Initializing CPU#3 [ 0.088774] x86: Booted up 1 node, 4 CPUs [ 0.088777] smpboot: Total of 4 processors activated (19953.85 BogoMIPS) [ 0.091935] devtmpfs: initialized [ 0.092215] evm: security.selinux [ 0.092216] evm: security.SMACK64 [ 0.092217] evm: security.SMACK64EXEC [ 0.092218] evm: security.SMACK64TRANSMUTE [ 0.092219] evm: security.SMACK64MMAP [ 0.092219] evm: security.ima [ 0.092220] evm: security.capability [ 0.092301] PM: Registering ACPI NVS region [mem 0xbaebf000-0xbafbefff] (1048576 bytes) [ 0.092391] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.092463] pinctrl core: initialized pinctrl subsystem [ 0.092561] RTC time: 2:31:22, date: 01/01/16 [ 0.092664] NET: Registered protocol family 16 [ 0.092856] EISA bus registered [ 0.104810] cpuidle: using governor ladder [ 0.116831] cpuidle: using governor menu [ 0.116934] Simple Boot Flag at 0x44 set to 0x1 [ 0.116985] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.116986] ACPI: bus type PCI registered [ 0.116988] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.117066] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.117068] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.117069] PCI: Using MMCONFIG for extended config space [ 0.117070] PCI: Using configuration type 1 for base access [ 0.117218] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.117222] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.117222] mtrr: probably your BIOS does not setup all CPUs. [ 0.117223] mtrr: corrected configuration. [ 0.133213] ACPI: Added _OSI(Module Device) [ 0.133215] ACPI: Added _OSI(Processor Device) [ 0.133216] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.133217] ACPI: Added _OSI(Processor Aggregator Device) [ 0.135939] ACPI: Executed 1 blocks of module-level executable AML code [ 0.138308] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.139051] ACPI: Dynamic OEM Table Load: [ 0.139060] ACPI: SSDT 0x00000000F2F1A000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.139570] ACPI: Dynamic OEM Table Load: [ 0.139577] ACPI: SSDT 0x00000000F2F12400 000303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.140022] ACPI: Dynamic OEM Table Load: [ 0.140028] ACPI: SSDT 0x00000000F2FF9800 000119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.140829] ACPI : EC: EC started [ 0.141222] ACPI: Interpreter enabled [ 0.141231] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580) [ 0.141235] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580) [ 0.141247] ACPI: (supports S0 S3 S4 S5) [ 0.141248] ACPI: Using IOAPIC for interrupt routing [ 0.141271] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.664333] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.664339] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.664440] \_SB_.PCI0:_OSC invalid UUID [ 0.664441] _OSC request data:1 1f 0 [ 0.664444] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.664815] PCI host bridge to bus 0000:00 [ 0.664818] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.664820] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.664821] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.664823] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.664825] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff window] [ 0.664832] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 [ 0.664910] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400 [ 0.664940] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.664971] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.665011] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 [ 0.665023] pci 0000:00:02.0: reg 0x10: [mem 0xd3400000-0xd37fffff 64bit] [ 0.665029] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.665034] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 0.665121] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.665152] pci 0000:00:14.0: reg 0x10: [mem 0xd3a00000-0xd3a0ffff 64bit] [ 0.665209] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.665242] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.665282] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.665314] pci 0000:00:16.0: reg 0x10: [mem 0xd3a14000-0xd3a1400f 64bit] [ 0.665374] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.665448] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.665699] pci 0000:00:1a.0: reg 0x10: [mem 0xd3a19000-0xd3a193ff] [ 2.217448] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.217502] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 2.217544] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 2.217571] pci 0000:00:1b.0: reg 0x10: [mem 0xd3a10000-0xd3a13fff 64bit] [ 2.217630] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 2.217665] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 2.217705] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 2.217775] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.217847] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 [ 2.217917] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.217997] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 2.218246] pci 0000:00:1d.0: reg 0x10: [mem 0xd3a18000-0xd3a183ff] [ 2.219640] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.219691] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 2.219731] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100 [ 2.219891] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 2.219916] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f] [ 2.219924] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097] [ 2.219932] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087] [ 2.219940] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093] [ 2.219949] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f] [ 2.219957] pci 0000:00:1f.2: reg 0x24: [mem 0xd3a17000-0xd3a177ff] [ 2.219985] pci 0000:00:1f.2: PME# supported from D3hot [ 2.220050] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 2.220067] pci 0000:00:1f.3: reg 0x10: [mem 0xd3a15000-0xd3a150ff 64bit] [ 2.220089] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f] [ 2.220213] pci 0000:01:00.0: [10de:0de9] type 00 class 0x030000 [ 2.220234] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff] [ 2.220245] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 2.220256] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref] [ 2.220264] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f] [ 2.220272] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref] [ 2.220329] pci 0000:01:00.0: System wakeup disabled by ACPI [ 2.225463] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.225468] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 2.225473] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff] [ 2.225479] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 2.225615] pci 0000:02:00.0: [1969:1090] type 00 class 0x020000 [ 2.225833] pci 0000:02:00.0: reg 0x10: [mem 0xd3900000-0xd393ffff 64bit] [ 2.225882] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x207f] [ 2.226228] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.226327] pci 0000:02:00.0: System wakeup disabled by ACPI [ 2.233519] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 2.233523] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 2.233528] pci 0000:00:1c.0: bridge window [mem 0xd3900000-0xd39fffff] [ 2.233642] pci 0000:03:00.0: [14e4:4727] type 00 class 0x028000 [ 2.233712] pci 0000:03:00.0: reg 0x10: [mem 0xd3800000-0xd3803fff 64bit] [ 2.233861] pci 0000:03:00.0: supports D1 D2 [ 2.233863] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 2.233899] pci 0000:03:00.0: System wakeup disabled by ACPI [ 2.241539] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 2.241545] pci 0000:00:1c.1: bridge window [mem 0xd3800000-0xd38fffff] [ 2.241579] pci_bus 0000:00: on NUMA node 0 [ 2.313859] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 2.313903] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 2.313945] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 2.313987] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 2.314029] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 2.314071] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 2.314112] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 2.314153] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 2.314249] ACPI: Enabled 5 GPEs in block 00 to 3F [ 2.314277] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 2.314368] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 2.314370] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 2.314374] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none [ 2.314375] vgaarb: loaded [ 2.314376] vgaarb: bridge control possible 0000:01:00.0 [ 2.314377] vgaarb: no bridge control possible 0000:00:02.0 [ 2.314618] SCSI subsystem initialized [ 2.314656] libata version 3.00 loaded. [ 2.314678] ACPI: bus type USB registered [ 2.314694] usbcore: registered new interface driver usbfs [ 2.314704] usbcore: registered new interface driver hub [ 2.314721] usbcore: registered new device driver usb [ 2.314864] PCI: Using ACPI for IRQ routing [ 2.316413] PCI: pci_cache_line_size set to 64 bytes [ 2.316497] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 2.316499] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 2.316500] e820: reserve RAM buffer [mem 0xbaabf000-0xbbffffff] [ 2.316502] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff] [ 2.316503] e820: reserve RAM buffer [mem 0x13f600000-0x13fffffff] [ 2.316610] NetLabel: Initializing [ 2.316612] NetLabel: domain hash size = 128 [ 2.316612] NetLabel: protocols = UNLABELED CIPSOv4 [ 2.316623] NetLabel: unlabeled traffic allowed by default [ 2.316728] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 2.316732] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 2.319767] clocksource: Switched to clocksource hpet [ 2.326168] AppArmor: AppArmor Filesystem Enabled [ 2.326234] pnp: PnP ACPI init [ 2.326345] system 00:00: [io 0x0680-0x069f] has been reserved [ 2.326348] system 00:00: [io 0x1000-0x100f] has been reserved [ 2.326349] system 00:00: [io 0xffff] has been reserved [ 2.326351] system 00:00: [io 0xffff] has been reserved [ 2.326353] system 00:00: [io 0x0400-0x0453] could not be reserved [ 2.326355] system 00:00: [io 0x0458-0x047f] has been reserved [ 2.326357] system 00:00: [io 0x0500-0x057f] has been reserved [ 2.326358] system 00:00: [io 0x164e-0x164f] has been reserved [ 2.326360] system 00:00: [io 0xfd60-0xfd63] has been reserved [ 2.326363] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.326392] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 2.326436] system 00:02: [io 0x0454-0x0457] has been reserved [ 2.326439] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 2.326463] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 2.326520] pnp 00:04: Plug and Play ACPI device, IDs ETD0613 ETD0001 PNP0f13 (active) [ 2.396011] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 2.396014] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 2.396015] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 2.396017] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 2.396019] system 00:05: [mem 0xf0000000-0xf3ffffff] has been reserved [ 2.396021] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 2.396023] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved [ 2.396025] system 00:05: [mem 0xff000000-0xff000fff] has been reserved [ 2.396026] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved [ 2.396028] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 2.396030] system 00:05: [mem 0xbfa00000-0xbfa00fff] has been reserved [ 2.396033] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.396299] system 00:06: [mem 0x20000000-0x201fffff] has been reserved [ 2.396301] system 00:06: [mem 0x40004000-0x40004fff] has been reserved [ 2.396303] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 2.396317] pnp: PnP ACPI: found 7 devices [ 2.396321] PnPBIOS: Disabled by ACPI PNP [ 2.432884] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 2.432891] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window [ 2.432918] pci 0000:01:00.0: BAR 6: assigned [mem 0xd3000000-0xd307ffff pref] [ 2.432920] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.432922] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 2.432925] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff] [ 2.432928] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 2.432931] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 2.432934] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 2.432939] pci 0000:00:1c.0: bridge window [mem 0xd3900000-0xd39fffff] [ 2.432947] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 2.432953] pci 0000:00:1c.1: bridge window [mem 0xd3800000-0xd38fffff] [ 2.432962] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 2.432964] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 2.432965] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 2.432967] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff window] [ 2.432969] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 2.432970] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd30fffff] [ 2.432972] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] [ 2.432974] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 2.432975] pci_bus 0000:02: resource 1 [mem 0xd3900000-0xd39fffff] [ 2.432977] pci_bus 0000:03: resource 1 [mem 0xd3800000-0xd38fffff] [ 2.433003] NET: Registered protocol family 2 [ 2.433134] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 2.433143] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 2.433156] TCP: Hash tables configured (established 8192 bind 8192) [ 2.433168] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 2.433172] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 2.433209] NET: Registered protocol family 1 [ 2.433224] pci 0000:00:02.0: Video device with shadowed ROM [ 2.464054] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag [ 2.464098] PCI: CLS 64 bytes, default 64 [ 2.464148] Trying to unpack rootfs image as initramfs... [ 2.991161] Freeing initrd memory: 32204K (f410a000 - f607d000) [ 2.991277] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer [ 2.991279] hw unit of domain pp0-core 2^-16 Joules [ 2.991280] hw unit of domain package 2^-16 Joules [ 2.991281] hw unit of domain pp1-gpu 2^-16 Joules [ 2.991401] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x1b [ 2.991408] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x1b [ 2.991413] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x1b [ 2.991419] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x1b [ 2.991472] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 2.991551] Scanning for low memory corruption every 60 seconds [ 2.991887] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 2.991918] Initialise system trusted keyring [ 2.991944] audit: initializing netlink subsys (disabled) [ 2.991959] audit: type=2000 audit(1451615483.076:1): initialized [ 2.992281] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.993741] zpool: loaded [ 2.993743] zbud: loaded [ 2.993805] VFS: Disk quotas dquot_6.6.0 [ 2.993836] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.994241] fuse init (API version 7.23) [ 2.994377] Key type big_key registered [ 2.994658] Key type asymmetric registered [ 2.994660] Asymmetric key parser 'x509' registered [ 2.994677] bounce: pool size: 64 pages [ 2.994713] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2.994749] io scheduler noop registered [ 2.994751] io scheduler deadline registered (default) [ 2.994782] io scheduler cfq registered [ 2.995202] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.995209] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.995239] vesafb: mode is 1366x768x32, linelength=5504, pages=0 [ 2.995240] vesafb: scrolling: redraw [ 2.995241] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.995250] vesafb: framebuffer at 0xe0000000, mapped to 0xf8600000, using 4160k, total 4160k [ 2.995336] Console: switching to colour frame buffer device 170x48 [ 2.995364] fb0: VESA VGA frame buffer device [ 2.995380] intel_idle: MWAIT substates: 0x21120 [ 2.995381] intel_idle: v0.4 model 0x3A [ 2.995382] intel_idle: lapic_timer_reliable_states 0xffffffff [ 2.995593] ACPI: AC Adapter [ACAD] (on-line) [ 2.995650] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0 [ 2.995653] ACPI: Power Button [PWRB] [ 2.995687] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input1 [ 2.995689] ACPI: Sleep Button [SLPB] [ 2.995729] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 2.995746] ACPI: Lid Switch [LID0] [ 2.995780] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 2.995782] ACPI: Power Button [PWRF] [ 2.998138] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.998140] ACPI: Thermal Zone [TZ00] (73 C) [ 2.998170] GHES: HEST is not enabled! [ 2.998251] isapnp: Scanning for PnP cards... [ 2.998279] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 3.236848] ACPI: Battery Slot [BAT1] (battery present) [ 3.237028] Linux agpgart interface v0.103 [ 3.239155] brd: module loaded [ 3.239997] loop: module loaded [ 3.240193] libphy: Fixed MDIO Bus: probed [ 3.240196] tun: Universal TUN/TAP device driver, 1.6 [ 3.240197] tun: (C) 1999-2004 Max Krasnyansky [ 3.240242] PPP generic driver version 2.4.2 [ 3.240398] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.240404] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 3.240491] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930 [ 3.240499] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 3.240580] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.240582] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.240584] usb usb1: Product: xHCI Host Controller [ 3.240585] usb usb1: Manufacturer: Linux 4.2.0-16-generic xhci-hcd [ 3.240587] usb usb1: SerialNumber: 0000:00:14.0 [ 3.240698] hub 1-0:1.0: USB hub found [ 3.240707] hub 1-0:1.0: 4 ports detected [ 3.241028] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.241031] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 3.241063] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.241064] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.241066] usb usb2: Product: xHCI Host Controller [ 3.241067] usb usb2: Manufacturer: Linux 4.2.0-16-generic xhci-hcd [ 3.241069] usb usb2: SerialNumber: 0000:00:14.0 [ 3.241167] hub 2-0:1.0: USB hub found [ 3.241176] hub 2-0:1.0: 4 ports detected [ 3.241468] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.241476] ehci-pci: EHCI PCI platform driver [ 3.241558] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 3.241562] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 3.241573] ehci-pci 0000:00:1a.0: debug port 2 [ 3.245483] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 3.245491] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd3a19000 [ 3.256855] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 3.256883] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.256885] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.256886] usb usb3: Product: EHCI Host Controller [ 3.256888] usb usb3: Manufacturer: Linux 4.2.0-16-generic ehci_hcd [ 3.256889] usb usb3: SerialNumber: 0000:00:1a.0 [ 3.256991] hub 3-0:1.0: USB hub found [ 3.256997] hub 3-0:1.0: 2 ports detected [ 3.257161] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 3.257165] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 3.257175] ehci-pci 0000:00:1d.0: debug port 2 [ 3.261063] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 3.261071] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd3a18000 [ 3.272880] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 3.272919] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.272921] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.272922] usb usb4: Product: EHCI Host Controller [ 3.272924] usb usb4: Manufacturer: Linux 4.2.0-16-generic ehci_hcd [ 3.272925] usb usb4: SerialNumber: 0000:00:1d.0 [ 3.273038] hub 4-0:1.0: USB hub found [ 3.273044] hub 4-0:1.0: 2 ports detected [ 3.273141] ehci-platform: EHCI generic platform driver [ 3.273150] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.273154] ohci-pci: OHCI PCI platform driver [ 3.273164] ohci-platform: OHCI generic platform driver [ 3.273172] uhci_hcd: USB Universal Host Controller Interface driver [ 3.273226] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS4] at 0x60,0x64 irq 1,12 [ 3.292080] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.292084] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.292210] mousedev: PS/2 mouse device common for all mice [ 3.294400] rtc_cmos 00:01: RTC can wake from S4 [ 3.294529] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 3.294555] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 3.294564] i2c /dev entries driver [ 3.294613] device-mapper: uevent: version 1.0.3 [ 3.294683] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com [ 3.294703] platform eisa.0: Probing EISA bus 0 [ 3.294705] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 3.294707] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 3.294708] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 3.294710] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 3.294711] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 3.294712] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 3.294714] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 3.294715] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 3.294717] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 3.294718] platform eisa.0: EISA: Detected 0 cards [ 3.294737] cpufreq-nforce2: No nForce2 chipset. [ 3.294742] Intel P-state driver initializing. [ 3.294891] ledtrig-cpu: registered to indicate activity on CPUs [ 3.294918] PCCT header not found. [ 3.295332] NET: Registered protocol family 10 [ 3.295742] NET: Registered protocol family 17 [ 3.295773] Key type dns_resolver registered [ 3.296193] Using IPI No-Shortcut mode [ 3.296451] Loading compiled-in X.509 certificates [ 3.301550] Loaded X.509 cert 'Build time autogenerated kernel key: 9a18469980b5ebdd28885474f95f179ffebbdfd7' [ 3.301563] registered taskstats version 1 [ 3.301580] zswap: loading zswap [ 3.301582] zswap: using zbud pool [ 3.301585] zswap: using lzo compressor [ 3.303277] Key type trusted registered [ 3.306163] Key type encrypted registered [ 3.306168] AppArmor: AppArmor sha1 policy hashing enabled [ 3.306171] ima: No TPM chip found, activating TPM-bypass! [ 3.306186] evm: HMAC attrs: 0x1 [ 3.306508] Magic number: 0:728:509 [ 3.306587] rtc_cmos 00:01: setting system clock to 2016-01-01 02:31:25 UTC (1451615485) [ 3.306637] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.306638] EDD information not available. [ 3.306705] PM: Hibernation image not present or could not be loaded. [ 3.309206] isapnp: No Plug & Play device found [ 3.309367] Freeing unused kernel memory: 928K (c1b14000 - c1bfc000) [ 3.309445] Write protecting the kernel text: 7576k [ 3.309476] Write protecting the kernel read-only data: 3024k [ 3.309477] NX-protecting the kernel data: 4712k [ 3.310620] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 3.319016] random: systemd-udevd urandom read with 0 bits of entropy available [ 3.371383] [drm] Initialized drm 1.1.0 20060810 [ 3.380271] ahci 0000:00:1f.2: version 3.0 [ 3.380585] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 3.380609] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode [ 3.380612] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst [ 3.382201] alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [dc:0e:a1:fd:7d:5f] [ 3.383028] scsi host0: ahci [ 3.383126] scsi host1: ahci [ 3.383214] scsi host2: ahci [ 3.383302] scsi host3: ahci [ 3.383606] scsi host4: ahci [ 3.383696] scsi host5: ahci [ 3.383747] ata1: SATA max UDMA/133 abar m2048@0xd3a17000 port 0xd3a17100 irq 26 [ 3.383749] ata2: DUMMY [ 3.383750] ata3: DUMMY [ 3.383751] ata4: DUMMY [ 3.383751] ata5: DUMMY [ 3.383752] ata6: DUMMY [ 3.407421] wmi: Mapper loaded [ 3.426016] alx 0000:02:00.0 enp2s0: renamed from eth0 [ 3.432921] [drm] Memory usable by graphics device = 2048M [ 3.432925] checking generic (e0000000 410000) vs hw (e0000000 10000000) [ 3.432926] fb: switching to inteldrmfb from VESA VGA [ 3.432947] Console: switching to colour dummy device 80x25 [ 3.433014] [drm] Replacing VGA console driver [ 3.448121] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95) [ 3.448162] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95) [ 3.448280] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported [ 3.448283] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle [ 3.448311] nouveau 0000:01:00.0: enabling device (0006 -> 0007) [ 3.449140] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.449142] [drm] Driver supports precise vblank timestamp query. [ 3.449233] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 3.470596] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS [ 3.470692] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no) [ 3.470805] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:35/LNXVIDEO:00/input/input9 [ 3.471361] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.471440] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:03/input/input10 [ 3.471504] [drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0 [ 3.472078] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0c1480a1 [ 3.472081] nouveau [ DEVICE][0000:01:00.0] Chipset: GF108 (NVC1) [ 3.472083] nouveau [ DEVICE][0000:01:00.0] Family : NVC0 [ 3.481857] fbcon: inteldrmfb (fb0) is primary device [ 3.481913] Console: switching to colour frame buffer device 170x48 [ 3.481940] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.481941] i915 0000:00:02.0: registered panic notifier [ 3.482881] nouveau [ VBIOS][0000:01:00.0] using image from ACPI [ 3.483024] nouveau [ VBIOS][0000:01:00.0] BIT signature found [ 3.483026] nouveau [ VBIOS][0000:01:00.0] version 70.08.a8.00.42 [ 3.484269] nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised [ 3.484279] nouveau [ VBIOS][0000:01:00.0] running init tables [ 3.569215] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 3.591469] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled [ 3.591512] nouveau W[ PFB][0000:01:00.0][0x00000000] reclocking of this ram type unsupported [ 3.591514] nouveau [ PFB][0000:01:00.0] RAM type: DDR3 [ 3.591516] nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB [ 3.591517] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags [ 3.593050] nouveau [ VOLT][0000:01:00.0] GPU voltage: 912500uv [ 3.622204] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external [ 3.622218] nouveau [ PTHERM][0000:01:00.0] fan management: automatic [ 3.622237] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes [ 3.642162] nouveau [ CLK][0000:01:00.0] 07: core 270 MHz memory 405 MHz [ 3.642166] nouveau [ CLK][0000:01:00.0] 0f: core 475 MHz memory 900 MHz [ 3.642304] nouveau [ CLK][0000:01:00.0] --: core 270 MHz memory 405 MHz [ 3.645305] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 3.645322] usb 1-3: new high-speed USB device number 2 using xhci_hcd [ 3.645568] vga_switcheroo: enabled [ 3.645656] [TTM] Zone kernel: Available graphics memory: 428068 kiB [ 3.645658] [TTM] Zone highmem: Available graphics memory: 2019750 kiB [ 3.645659] [TTM] Initializing pool allocator [ 3.645671] [TTM] Initializing DMA pool allocator [ 3.645679] nouveau [ DRM] VRAM: 1024 MiB [ 3.645680] nouveau [ DRM] GART: 1048576 MiB [ 3.645683] nouveau [ DRM] TMDS table version 2.0 [ 3.645684] nouveau [ DRM] DCB version 4.0 [ 3.645686] nouveau [ DRM] DCB outp 00: 02000300 00000000 [ 3.645687] nouveau [ DRM] DCB conn 00: 00000000 [ 3.646166] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.646167] [drm] Driver supports precise vblank timestamp query. [ 3.651482] nouveau [ DRM] MM: using COPY0 for buffer copies [ 3.692938] nouveau [ DRM] allocated 1024x768 fb: 0x60000, bo f2d99000 [ 3.693010] nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device [ 3.693020] [drm] Initialized nouveau 1.2.2 20120801 for 0000:01:00.0 on minor 1 [ 3.701455] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.701917] usb 3-1: New USB device found, idVendor=8087, idProduct=0024 [ 3.701920] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.702221] hub 3-1:1.0: USB hub found [ 3.702302] hub 3-1:1.0: 6 ports detected [ 3.707977] ata1.00: failed to enable AA (error_mask=0x1) [ 3.707987] ata1.00: ATA-8: ST750LM022 HN-M750MBB, 2AR10001, max UDMA/100 [ 3.707991] ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.714566] ata1.00: failed to enable AA (error_mask=0x1) [ 3.714581] ata1.00: configured for UDMA/100 [ 3.721681] scsi 0:0:0:0: Direct-Access ATA ST750LM022 HN-M7 0001 PQ: 0 ANSI: 5 [ 3.722004] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 3.722007] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.722027] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.722067] sd 0:0:0:0: [sda] Write Protect is off [ 3.722070] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.722095] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.773885] usb 1-3: New USB device found, idVendor=1a40, idProduct=0101 [ 3.773888] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.773890] usb 1-3: Product: USB 2.0 Hub [ 3.774286] hub 1-3:1.0: USB hub found [ 3.774326] hub 1-3:1.0: 4 ports detected [ 3.777818] usb 4-1: New USB device found, idVendor=8087, idProduct=0024 [ 3.777825] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.778186] hub 4-1:1.0: USB hub found [ 3.778287] hub 4-1:1.0: 6 ports detected [ 3.799505] sda: sda1 sda2 < sda5 > [ 3.800046] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.973773] usb 3-1.4: new high-speed USB device number 3 using ehci-pci [ 3.989769] tsc: Refined TSC clocksource calibration: 2494.335 MHz [ 3.989774] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f452193ad, max_idle_ns: 440795212740 ns [ 4.049835] usb 4-1.6: new high-speed USB device number 3 using ehci-pci [ 4.061821] usb 1-3.1: new low-speed USB device number 3 using xhci_hcd [ 4.066602] usb 3-1.4: New USB device found, idVendor=0bda, idProduct=0129 [ 4.066609] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.066613] usb 3-1.4: Product: USB2.0-CRW [ 4.066616] usb 3-1.4: Manufacturer: Generic [ 4.066619] usb 3-1.4: SerialNumber: 20100201396000000 [ 4.073155] usbcore: registered new interface driver rtsx_usb [ 4.157850] usb 4-1.6: New USB device found, idVendor=04f2, idProduct=b2e2 [ 4.157853] usb 4-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.157855] usb 4-1.6: Product: Lenovo EasyCamera [ 4.157857] usb 4-1.6: Manufacturer: Chicony Corp. [ 4.178308] usb 1-3.1: New USB device found, idVendor=04d9, idProduct=a01c [ 4.178311] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.178312] usb 1-3.1: Product: Wireless USB Device [ 4.178314] usb 1-3.1: Manufacturer: HOLTEK [ 4.178517] usb 1-3.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 4.178521] usb 1-3.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 4.184498] hidraw: raw HID events driver (C) Jiri Kosina [ 4.204325] usbcore: registered new interface driver usbhid [ 4.204330] usbhid: USB HID core driver [ 4.207621] input: HOLTEK Wireless USB Device as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1:1.0/0003:04D9:A01C.0001/input/input11 [ 4.262396] hid-generic 0003:04D9:A01C.0001: input,hidraw0: USB HID v1.10 Keyboard [HOLTEK Wireless USB Device] on usb-0000:00:14.0-3.1/input0 [ 4.262697] input: HOLTEK Wireless USB Device as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1:1.1/0003:04D9:A01C.0002/input/input12 [ 4.266077] usb 1-3.2: new high-speed USB device number 4 using xhci_hcd [ 4.318471] hid-generic 0003:04D9:A01C.0002: input,hidraw1: USB HID v1.10 Mouse [HOLTEK Wireless USB Device] on usb-0000:00:14.0-3.1/input1 [ 4.354665] usb 1-3.2: New USB device found, idVendor=0781, idProduct=5567 [ 4.354668] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.354670] usb 1-3.2: Product: Cruzer Blade [ 4.354671] usb 1-3.2: Manufacturer: SanDisk [ 4.354672] usb 1-3.2: SerialNumber: 4C531001340624118243 [ 4.361225] usb-storage 1-3.2:1.0: USB Mass Storage device detected [ 4.361357] scsi host6: usb-storage 1-3.2:1.0 [ 4.361436] usbcore: registered new interface driver usb-storage [ 4.364496] usbcore: registered new interface driver uas [ 4.426241] usb 1-3.4: new high-speed USB device number 5 using xhci_hcd [ 4.435280] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f02) [ 4.456244] psmouse serio1: elantech: Synaptics capabilities query result 0x78, 0x17, 0x0b. [ 4.480350] psmouse serio1: elantech: Elan sample query result 03, 3d, 85 [ 4.515515] usb 1-3.4: New USB device found, idVendor=054c, idProduct=05ba [ 4.515518] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.515520] usb 1-3.4: Product: Storage Media [ 4.515521] usb 1-3.4: Manufacturer: Sony [ 4.515523] usb 1-3.4: SerialNumber: CB6211509163730170 [ 4.515621] usb 1-3.4: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes [ 4.515626] usb 1-3.4: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes [ 4.515778] usb-storage 1-3.4:1.0: USB Mass Storage device detected [ 4.516155] scsi host7: usb-storage 1-3.4:1.0 [ 4.527972] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 4.598184] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input8 [ 4.990996] clocksource: Switched to clocksource tsc [ 5.146362] systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time. [ 5.359709] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Blade 1.27 PQ: 0 ANSI: 6 [ 5.359900] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 5.360179] sd 6:0:0:0: [sdb] 122107136 512-byte logical blocks: (62.5 GB/58.2 GiB) [ 5.360873] sd 6:0:0:0: [sdb] Write Protect is off [ 5.360877] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 5.361141] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 5.364393] sdb: sdb1 [ 5.365278] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 5.380817] systemd[1]: Failed to insert module 'kdbus': Function not implemented [ 5.529655] systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 5.529816] systemd[1]: Detected architecture x86. [ 5.546948] systemd[1]: Set hostname to . [ 5.582516] systemd[1]: Initializing machine ID from random generator. [ 5.582578] systemd[1]: Installed transient /etc/machine-id file. [ 5.607866] systemd[1]: /etc/mtab is not a symlink or not pointing to /proc/self/mounts. This is not supported anymore. Please make sure to replace this file by a symlink to avoid incorrect or misleading mount(8) output. [ 5.661625] random: nonblocking pool is initialized [ 5.914933] scsi 7:0:0:0: Direct-Access Sony Storage Media 0100 PQ: 0 ANSI: 4 [ 5.915266] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 5.915426] sd 7:0:0:0: [sdc] 126844928 512-byte logical blocks: (64.9 GB/60.4 GiB) [ 5.915854] sd 7:0:0:0: [sdc] Write Protect is off [ 5.915856] sd 7:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 5.916395] sd 7:0:0:0: [sdc] No Caching mode page found [ 5.916398] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 5.919256] sdc: sdc1 [ 5.920563] sd 7:0:0:0: [sdc] Attached SCSI removable disk [ 6.215835] systemd[1]: Reached target User and Group Name Lookups. [ 6.215891] systemd[1]: Reached target Remote File Systems (Pre). [ 6.215928] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.216054] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.216083] systemd[1]: Created slice Root Slice. [ 6.216123] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.216142] systemd[1]: Listening on fsck to fsckd communication Socket. [ 6.216203] systemd[1]: Listening on Journal Audit Socket. [ 6.216258] systemd[1]: Listening on udev Control Socket. [ 6.216288] systemd[1]: Listening on Journal Socket. [ 6.216373] systemd[1]: Created slice System Slice. [ 6.216845] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 6.217322] systemd[1]: Starting Uncomplicated firewall... [ 6.218010] systemd[1]: Started Braille Device Support. [ 6.319254] systemd[1]: Mounting Huge Pages File System... [ 6.319741] systemd[1]: Starting Setup Virtual Console... [ 6.522089] systemd[1]: Starting Load Kernel Modules... [ 6.522177] systemd[1]: Created slice system-getty.slice. [ 6.522696] systemd[1]: Starting Increase datagram queue length... [ 6.523411] systemd[1]: Started Read required files in advance. [ 6.523992] systemd[1]: Mounting Debug File System... [ 6.524480] systemd[1]: Mounting POSIX Message Queue File System... [ 6.524509] systemd[1]: Reached target Encrypted Volumes. [ 6.524590] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 6.524692] systemd[1]: Created slice User and Session Slice. [ 6.524715] systemd[1]: Reached target Slices. [ 6.524768] systemd[1]: Listening on udev Kernel Socket. [ 6.525409] systemd[1]: Starting udev Coldplug all Devices... [ 6.526545] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 6.526729] systemd[1]: Started Uncomplicated firewall. [ 6.526883] systemd[1]: Started Setup Virtual Console. [ 6.527377] systemd[1]: Starting Create Static Device Nodes in /dev... [ 6.990790] lp: driver loaded but no devices found [ 7.010698] ppdev: user-space parallel port driver [ 7.070393] systemd[1]: Mounted Huge Pages File System. [ 7.070467] systemd[1]: Mounted Debug File System. [ 7.070493] systemd[1]: Mounted POSIX Message Queue File System. [ 7.071254] systemd[1]: Started Increase datagram queue length. [ 7.077984] systemd[1]: Listening on Syslog Socket. [ 7.078425] systemd[1]: Starting Journal Service... [ 7.226346] systemd[1]: Started Load Kernel Modules. [ 7.226998] systemd[1]: Starting Apply Kernel Variables... [ 7.227550] systemd[1]: Mounting FUSE Control File System... [ 7.230210] systemd[1]: Mounted FUSE Control File System. [ 7.263418] systemd[1]: Started udev Coldplug all Devices. [ 7.839533] systemd[1]: Started Apply Kernel Variables. [ 7.853583] systemd[1]: Started Journal Service. [ 8.145154] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 8.515974] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150619/utaddress-254) [ 8.515982] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.515989] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254) [ 8.515994] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150619/utaddress-254) [ 8.515999] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.516000] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254) [ 8.516004] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150619/utaddress-254) [ 8.516009] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.516010] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254) [ 8.516014] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150619/utaddress-254) [ 8.516018] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.516020] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 8.731130] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95) [ 8.731257] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM [ 8.731261] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95) [ 8.901610] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input13 [ 8.923122] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.499288] systemd-journald[251]: Received request to flush runtime journal from PID 1 [ 9.697348] wl: module license 'MIXED/Proprietary' taints kernel. [ 9.697351] Disabling lock debugging due to kernel taint [ 9.699634] wl: module verification failed: signature and/or required key missing - tainting kernel [ 9.919771] wlan0: Broadcom BCM4727 802.11 Hybrid Wireless Controller 6.30.223.248 (r487574) [ 9.945297] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing. [ 9.945735] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker [ 9.945738] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 9.945740] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x19/0x0/0x0/0x0/0x0) [ 9.945742] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0 [ 9.945744] snd_hda_codec_conexant hdaudioC0D0: inputs: [ 9.945746] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1b [ 9.945747] snd_hda_codec_conexant hdaudioC0D0: Mic=0x1a [ 9.946813] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication [ 9.979520] media: Linux media interface: v0.10 [ 9.987708] intel_rapl: Found RAPL domain package [ 9.987711] intel_rapl: Found RAPL domain core [ 9.987714] intel_rapl: Found RAPL domain uncore [ 9.999499] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 9.999575] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 9.999647] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 10.006908] Linux video capture interface: v2.00 [ 10.123465] wl 0000:03:00.0 wlp3s0: renamed from wlan0 [ 10.319356] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (04f2:b2e2) [ 10.321147] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input17 [ 10.321204] usbcore: registered new interface driver uvcvideo [ 10.321205] USB Video Class driver (1.1.1) [ 11.259062] cfg80211: World regulatory domain updated: [ 11.259067] cfg80211: DFS Master region: unset [ 11.259068] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 11.259071] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 11.259074] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 11.259076] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 11.259079] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 11.259082] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 11.259084] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 11.259086] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 11.259089] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 13.083353] Adding 4091900k swap on /dev/sda5. Priority:-1 extents:1 across:4091900k FS [ 13.567086] audit: type=1400 audit(1451604695.745:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=502 comm="apparmor_parser" [ 13.567103] audit: type=1400 audit(1451604695.745:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=502 comm="apparmor_parser" [ 13.691919] audit: type=1400 audit(1451604695.869:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=502 comm="apparmor_parser" [ 13.691937] audit: type=1400 audit(1451604695.869:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=502 comm="apparmor_parser" [ 13.691941] audit: type=1400 audit(1451604695.869:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=502 comm="apparmor_parser" [ 13.691946] audit: type=1400 audit(1451604695.869:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=502 comm="apparmor_parser" [ 13.909169] audit: type=1400 audit(1451604696.089:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=502 comm="apparmor_parser" [ 13.909176] audit: type=1400 audit(1451604696.089:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=502 comm="apparmor_parser" [ 13.909188] audit: type=1400 audit(1451604696.089:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=502 comm="apparmor_parser" [ 13.909192] audit: type=1400 audit(1451604696.089:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=502 comm="apparmor_parser" [ 18.742610] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95) [ 18.742705] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM [ 18.742710] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95) [ 19.651180] cgroup: new mount options do not match the existing superblock, will be ignored [ 21.022474] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 21.025292] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 21.029248] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 26.610318] cfg80211: World regulatory domain updated: [ 26.610321] cfg80211: DFS Master region: unset [ 26.610322] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 26.610324] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 26.610326] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 26.610327] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 26.610328] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 26.610330] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 26.610331] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 26.610333] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 26.610334] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 27.969530] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A [ 27.969563] [drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun [ 35.738070] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95) [ 35.738156] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM [ 35.738161] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95) [ 136.903747] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 136.909594] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 187.384115] usb 1-3: USB disconnect, device number 2 [ 187.384124] usb 1-3.1: USB disconnect, device number 3 [ 187.528219] usb 1-3.2: USB disconnect, device number 4 [ 187.535585] usb 1-3.4: USB disconnect, device number 5 [ 191.772972] usb 1-3: new high-speed USB device number 6 using xhci_hcd [ 191.901427] usb 1-3: New USB device found, idVendor=1a40, idProduct=0101 [ 191.901434] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 191.901438] usb 1-3: Product: USB 2.0 Hub [ 191.901911] hub 1-3:1.0: USB hub found [ 191.901955] hub 1-3:1.0: 4 ports detected [ 192.189439] usb 1-3.1: new low-speed USB device number 7 using xhci_hcd [ 192.305963] usb 1-3.1: New USB device found, idVendor=04d9, idProduct=a01c [ 192.305970] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 192.305974] usb 1-3.1: Product: Wireless USB Device [ 192.305977] usb 1-3.1: Manufacturer: HOLTEK [ 192.306307] usb 1-3.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 192.306323] usb 1-3.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 192.313906] input: HOLTEK Wireless USB Device as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1:1.0/0003:04D9:A01C.0003/input/input18 [ 192.370386] hid-generic 0003:04D9:A01C.0003: input,hidraw0: USB HID v1.10 Keyboard [HOLTEK Wireless USB Device] on usb-0000:00:14.0-3.1/input0 [ 192.382648] input: HOLTEK Wireless USB Device as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1:1.1/0003:04D9:A01C.0004/input/input19 [ 192.438345] hid-generic 0003:04D9:A01C.0004: input,hidraw1: USB HID v1.10 Mouse [HOLTEK Wireless USB Device] on usb-0000:00:14.0-3.1/input1 [ 192.525830] usb 1-3.2: new high-speed USB device number 8 using xhci_hcd [ 192.614543] usb 1-3.2: New USB device found, idVendor=0781, idProduct=5567 [ 192.614550] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 192.614553] usb 1-3.2: Product: Cruzer Blade [ 192.614556] usb 1-3.2: Manufacturer: SanDisk [ 192.614559] usb 1-3.2: SerialNumber: 4C531001340624118243 [ 192.615102] usb-storage 1-3.2:1.0: USB Mass Storage device detected [ 192.615312] scsi host8: usb-storage 1-3.2:1.0 [ 192.686010] usb 1-3.4: new high-speed USB device number 9 using xhci_hcd [ 192.775772] usb 1-3.4: New USB device found, idVendor=054c, idProduct=05ba [ 192.775779] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 192.775782] usb 1-3.4: Product: Storage Media [ 192.775785] usb 1-3.4: Manufacturer: Sony [ 192.775788] usb 1-3.4: SerialNumber: CB6211509163730170 [ 192.776048] usb 1-3.4: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes [ 192.776062] usb 1-3.4: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes [ 192.776358] usb-storage 1-3.4:1.0: USB Mass Storage device detected [ 192.776609] scsi host9: usb-storage 1-3.4:1.0 [ 193.615963] scsi 8:0:0:0: Direct-Access SanDisk Cruzer Blade 1.27 PQ: 0 ANSI: 6 [ 193.616589] sd 8:0:0:0: Attached scsi generic sg1 type 0 [ 193.617556] sd 8:0:0:0: [sdb] 122107136 512-byte logical blocks: (62.5 GB/58.2 GiB) [ 193.621267] sd 8:0:0:0: [sdb] Write Protect is off [ 193.621275] sd 8:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 193.621567] sd 8:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 193.635212] sdb: sdb1 [ 193.636299] sd 8:0:0:0: [sdb] Attached SCSI removable disk [ 193.868576] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 194.174995] scsi 9:0:0:0: Direct-Access Sony Storage Media 0100 PQ: 0 ANSI: 4 [ 194.175340] sd 9:0:0:0: Attached scsi generic sg2 type 0 [ 194.179855] sd 9:0:0:0: [sdc] 126844928 512-byte logical blocks: (64.9 GB/60.4 GiB) [ 194.183472] sd 9:0:0:0: [sdc] Write Protect is off [ 194.183478] sd 9:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 194.183955] sd 9:0:0:0: [sdc] No Caching mode page found [ 194.183960] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 194.186998] sdc: sdc1 [ 194.188579] sd 9:0:0:0: [sdc] Attached SCSI removable disk [ 194.377207] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 238.308282] usb usb1-port3: disabled by hub (EMI?), re-enabling... [ 238.308296] usb 1-3: USB disconnect, device number 6 [ 238.308301] usb 1-3.1: USB disconnect, device number 7 [ 238.430062] usb 1-3.2: USB disconnect, device number 8 [ 238.435002] usb 1-3.4: USB disconnect, device number 9 [ 238.730293] usb 1-3: new high-speed USB device number 10 using xhci_hcd [ 238.858804] usb 1-3: New USB device found, idVendor=1a40, idProduct=0101 [ 238.858810] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 238.858814] usb 1-3: Product: USB 2.0 Hub [ 238.859208] hub 1-3:1.0: USB hub found [ 238.859239] hub 1-3:1.0: 4 ports detected [ 239.146829] usb 1-3.1: new low-speed USB device number 11 using xhci_hcd [ 239.263494] usb 1-3.1: New USB device found, idVendor=04d9, idProduct=a01c [ 239.263501] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 239.263504] usb 1-3.1: Product: Wireless USB Device [ 239.263507] usb 1-3.1: Manufacturer: HOLTEK [ 239.263821] usb 1-3.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 239.263837] usb 1-3.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 239.269913] input: HOLTEK Wireless USB Device as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1:1.0/0003:04D9:A01C.0005/input/input20 [ 239.323843] hid-generic 0003:04D9:A01C.0005: input,hidraw0: USB HID v1.10 Keyboard [HOLTEK Wireless USB Device] on usb-0000:00:14.0-3.1/input0 [ 239.336292] input: HOLTEK Wireless USB Device as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1:1.1/0003:04D9:A01C.0006/input/input21 [ 239.391759] hid-generic 0003:04D9:A01C.0006: input,hidraw1: USB HID v1.10 Mouse [HOLTEK Wireless USB Device] on usb-0000:00:14.0-3.1/input1 [ 239.479172] usb 1-3.2: new high-speed USB device number 12 using xhci_hcd [ 239.567949] usb 1-3.2: New USB device found, idVendor=0781, idProduct=5567 [ 239.567956] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 239.567959] usb 1-3.2: Product: Cruzer Blade [ 239.567962] usb 1-3.2: Manufacturer: SanDisk [ 239.567965] usb 1-3.2: SerialNumber: 4C531001340624118243 [ 239.568512] usb-storage 1-3.2:1.0: USB Mass Storage device detected [ 239.569093] scsi host10: usb-storage 1-3.2:1.0 [ 239.639362] usb 1-3.4: new high-speed USB device number 13 using xhci_hcd [ 239.729136] usb 1-3.4: New USB device found, idVendor=054c, idProduct=05ba [ 239.729143] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 239.729148] usb 1-3.4: Product: Storage Media [ 239.729151] usb 1-3.4: Manufacturer: Sony [ 239.729153] usb 1-3.4: SerialNumber: CB6211509163730170 [ 239.729425] usb 1-3.4: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes [ 239.729436] usb 1-3.4: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes [ 239.729794] usb-storage 1-3.4:1.0: USB Mass Storage device detected [ 239.730470] scsi host11: usb-storage 1-3.4:1.0 [ 240.569433] scsi 10:0:0:0: Direct-Access SanDisk Cruzer Blade 1.27 PQ: 0 ANSI: 6 [ 240.569998] sd 10:0:0:0: Attached scsi generic sg1 type 0 [ 240.572834] sd 10:0:0:0: [sdb] 122107136 512-byte logical blocks: (62.5 GB/58.2 GiB) [ 240.573958] sd 10:0:0:0: [sdb] Write Protect is off [ 240.573964] sd 10:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 240.574214] sd 10:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 240.581642] sdb: sdb1 [ 240.582802] sd 10:0:0:0: [sdb] Attached SCSI removable disk [ 240.814353] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 241.128263] scsi 11:0:0:0: Direct-Access Sony Storage Media 0100 PQ: 0 ANSI: 4 [ 241.128676] sd 11:0:0:0: Attached scsi generic sg2 type 0 [ 241.128949] sd 11:0:0:0: [sdc] 126844928 512-byte logical blocks: (64.9 GB/60.4 GiB) [ 241.130164] sd 11:0:0:0: [sdc] Write Protect is off [ 241.130171] sd 11:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 241.130620] sd 11:0:0:0: [sdc] No Caching mode page found [ 241.130625] sd 11:0:0:0: [sdc] Assuming drive cache: write through [ 241.134092] sdc: sdc1 [ 241.135746] sd 11:0:0:0: [sdc] Attached SCSI removable disk [ 241.341546] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 245.067041] usb 1-3: USB disconnect, device number 10 [ 245.067049] usb 1-3.1: USB disconnect, device number 11 [ 245.193685] usb 1-3.2: USB disconnect, device number 12 [ 245.200359] usb 1-3.4: USB disconnect, device number 13 [ 245.449922] usb 1-3: new high-speed USB device number 14 using xhci_hcd [ 245.578398] usb 1-3: New USB device found, idVendor=1a40, idProduct=0101 [ 245.578404] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 245.578408] usb 1-3: Product: USB 2.0 Hub [ 245.578854] hub 1-3:1.0: USB hub found [ 245.578897] hub 1-3:1.0: 4 ports detected [ 245.866452] usb 1-3.1: new low-speed USB device number 15 using xhci_hcd [ 245.983317] usb 1-3.1: New USB device found, idVendor=04d9, idProduct=a01c [ 245.983325] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 245.983329] usb 1-3.1: Product: Wireless USB Device [ 245.983332] usb 1-3.1: Manufacturer: HOLTEK [ 245.983650] usb 1-3.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 245.983662] usb 1-3.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 245.990069] input: HOLTEK Wireless USB Device as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1:1.0/0003:04D9:A01C.0007/input/input22 [ 246.043379] hid-generic 0003:04D9:A01C.0007: input,hidraw0: USB HID v1.10 Keyboard [HOLTEK Wireless USB Device] on usb-0000:00:14.0-3.1/input0 [ 246.056112] input: HOLTEK Wireless USB Device as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1:1.1/0003:04D9:A01C.0008/input/input23 [ 246.113206] hid-generic 0003:04D9:A01C.0008: input,hidraw1: USB HID v1.10 Mouse [HOLTEK Wireless USB Device] on usb-0000:00:14.0-3.1/input1 [ 246.198787] usb 1-3.2: new high-speed USB device number 16 using xhci_hcd [ 246.287504] usb 1-3.2: New USB device found, idVendor=0781, idProduct=5567 [ 246.287508] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 246.287509] usb 1-3.2: Product: Cruzer Blade [ 246.287511] usb 1-3.2: Manufacturer: SanDisk [ 246.287512] usb 1-3.2: SerialNumber: 4C531001340624118243 [ 246.287802] usb-storage 1-3.2:1.0: USB Mass Storage device detected [ 246.287889] scsi host12: usb-storage 1-3.2:1.0 [ 246.358922] usb 1-3.4: new high-speed USB device number 17 using xhci_hcd [ 246.449019] usb 1-3.4: New USB device found, idVendor=054c, idProduct=05ba [ 246.449022] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 246.449023] usb 1-3.4: Product: Storage Media [ 246.449025] usb 1-3.4: Manufacturer: Sony [ 246.449038] usb 1-3.4: SerialNumber: CB6211509163730170 [ 246.449260] usb 1-3.4: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes [ 246.449268] usb 1-3.4: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes [ 246.449485] usb-storage 1-3.4:1.0: USB Mass Storage device detected [ 246.449604] scsi host13: usb-storage 1-3.4:1.0 [ 247.289128] scsi 12:0:0:0: Direct-Access SanDisk Cruzer Blade 1.27 PQ: 0 ANSI: 6 [ 247.289977] sd 12:0:0:0: Attached scsi generic sg1 type 0 [ 247.290080] sd 12:0:0:0: [sdb] 122107136 512-byte logical blocks: (62.5 GB/58.2 GiB) [ 247.292028] sd 12:0:0:0: [sdb] Write Protect is off [ 247.292045] sd 12:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 247.292329] sd 12:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 247.296659] sdb: sdb1 [ 247.297778] sd 12:0:0:0: [sdb] Attached SCSI removable disk [ 247.541292] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 247.847874] scsi 13:0:0:0: Direct-Access Sony Storage Media 0100 PQ: 0 ANSI: 4 [ 247.848191] sd 13:0:0:0: Attached scsi generic sg2 type 0 [ 247.848521] sd 13:0:0:0: [sdc] 126844928 512-byte logical blocks: (64.9 GB/60.4 GiB) [ 247.848986] sd 13:0:0:0: [sdc] Write Protect is off [ 247.848990] sd 13:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 247.849426] sd 13:0:0:0: [sdc] No Caching mode page found [ 247.849431] sd 13:0:0:0: [sdc] Assuming drive cache: write through [ 247.854589] sdc: sdc1 [ 247.856091] sd 13:0:0:0: [sdc] Attached SCSI removable disk [ 248.050007] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 651.758323] usb 1-3.4: USB disconnect, device number 17 [ 651.762420] sd 13:0:0:0: [sdc] FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 651.762426] sd 13:0:0:0: [sdc] CDB: Read(10) 28 00 06 25 57 80 00 00 80 00 [ 651.762429] blk_update_request: I/O error, dev sdc, sector 103110528 [ 651.762466] sd 13:0:0:0: [sdc] FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 651.762469] sd 13:0:0:0: [sdc] CDB: Read(10) 28 00 06 25 58 80 00 00 80 00 [ 651.762471] blk_update_request: I/O error, dev sdc, sector 103110784 [ 652.002378] usb 1-3.4: new high-speed USB device number 18 using xhci_hcd [ 652.091469] usb 1-3.4: New USB device found, idVendor=054c, idProduct=05ba [ 652.091473] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 652.091476] usb 1-3.4: Product: Storage Media [ 652.091478] usb 1-3.4: Manufacturer: Sony [ 652.091480] usb 1-3.4: SerialNumber: CB6211509163730170 [ 652.091672] usb 1-3.4: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes [ 652.091677] usb 1-3.4: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes [ 652.092192] usb-storage 1-3.4:1.0: USB Mass Storage device detected [ 652.092476] scsi host14: usb-storage 1-3.4:1.0 [ 653.483180] scsi 14:0:0:0: Direct-Access Sony Storage Media 0100 PQ: 0 ANSI: 4 [ 653.483544] sd 14:0:0:0: Attached scsi generic sg2 type 0 [ 653.484298] sd 14:0:0:0: [sdd] 126844928 512-byte logical blocks: (64.9 GB/60.4 GiB) [ 653.484718] sd 14:0:0:0: [sdd] Write Protect is off [ 653.484722] sd 14:0:0:0: [sdd] Mode Sense: 43 00 00 00 [ 653.485158] sd 14:0:0:0: [sdd] No Caching mode page found [ 653.485162] sd 14:0:0:0: [sdd] Assuming drive cache: write through [ 653.489704] sdd: sdd1 [ 653.491065] sd 14:0:0:0: [sdd] Attached SCSI removable disk [ 653.671952] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 660.469553] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 701.806573] usb 1-3.4: USB disconnect, device number 18 [ 701.810490] sd 14:0:0:0: [sdd] FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 701.810497] sd 14:0:0:0: [sdd] CDB: Read(10) 28 00 06 28 0a 80 00 00 c0 00 [ 701.810500] blk_update_request: I/O error, dev sdd, sector 103287424 [ 701.810534] sd 14:0:0:0: [sdd] FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 701.810537] sd 14:0:0:0: [sdd] CDB: Read(10) 28 00 06 28 0c 40 00 00 40 00 [ 701.810540] blk_update_request: I/O error, dev sdd, sector 103287872 [ 702.046329] usb 1-3.4: new high-speed USB device number 19 using xhci_hcd [ 702.135777] usb 1-3.4: New USB device found, idVendor=054c, idProduct=05ba [ 702.135783] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 702.135787] usb 1-3.4: Product: Storage Media [ 702.135790] usb 1-3.4: Manufacturer: Sony [ 702.135793] usb 1-3.4: SerialNumber: CB6211509163730170 [ 702.135990] usb 1-3.4: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes [ 702.135993] usb 1-3.4: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes [ 702.136210] usb-storage 1-3.4:1.0: USB Mass Storage device detected [ 702.136571] scsi host15: usb-storage 1-3.4:1.0 [ 703.542920] scsi 15:0:0:0: Direct-Access Sony Storage Media 0100 PQ: 0 ANSI: 4 [ 703.543553] sd 15:0:0:0: Attached scsi generic sg2 type 0 [ 703.545210] sd 15:0:0:0: [sde] 126844928 512-byte logical blocks: (64.9 GB/60.4 GiB) [ 703.545683] sd 15:0:0:0: [sde] Write Protect is off [ 703.545689] sd 15:0:0:0: [sde] Mode Sense: 43 00 00 00 [ 703.546139] sd 15:0:0:0: [sde] No Caching mode page found [ 703.546144] sd 15:0:0:0: [sde] Assuming drive cache: write through [ 703.548985] sde: sde1 [ 703.551459] sd 15:0:0:0: [sde] Attached SCSI removable disk [ 703.745381] FAT-fs (sde1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 710.536681] usb 1-3.4: USB disconnect, device number 19 [ 713.527277] usb 1-4: new high-speed USB device number 20 using xhci_hcd [ 713.657083] usb 1-4: New USB device found, idVendor=054c, idProduct=05ba [ 713.657091] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 713.657094] usb 1-4: Product: Storage Media [ 713.657097] usb 1-4: Manufacturer: Sony [ 713.657100] usb 1-4: SerialNumber: CB6211509163730170 [ 713.657416] usb 1-4: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes [ 713.657430] usb 1-4: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes [ 713.657920] usb-storage 1-4:1.0: USB Mass Storage device detected [ 713.659468] scsi host16: usb-storage 1-4:1.0 [ 715.052821] scsi 16:0:0:0: Direct-Access Sony Storage Media 0100 PQ: 0 ANSI: 4 [ 715.053965] sd 16:0:0:0: [sde] 126844928 512-byte logical blocks: (64.9 GB/60.4 GiB) [ 715.054910] sd 16:0:0:0: Attached scsi generic sg2 type 0 [ 715.056771] sd 16:0:0:0: [sde] Write Protect is off [ 715.056781] sd 16:0:0:0: [sde] Mode Sense: 43 00 00 00 [ 715.058865] sd 16:0:0:0: [sde] No Caching mode page found [ 715.058875] sd 16:0:0:0: [sde] Assuming drive cache: write through [ 715.063612] sde: sde1 [ 715.068187] sd 16:0:0:0: [sde] Attached SCSI removable disk [ 715.256384] FAT-fs (sde1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 748.008868] FAT-fs (sde1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 753.262857] FAT-fs (sde1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 2098.930903] audit_printk_skb: 75 callbacks suppressed [ 2098.930906] audit: type=1400 audit(1451606779.220:37): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=20729 comm="apparmor_parser" [ 2098.931414] audit: type=1400 audit(1451606779.220:38): apparmor="STATUS" operation="profile_load" profile="unconfined" name="oxide_helper" pid=20729 comm="apparmor_parser"