[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-38-generic (buildd@zirconium) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #83-Ubuntu SMP Wed Jan 4 11:13:04 UTC 2012 (Ubuntu 2.6.32-38.83-generic 2.6.32.52+drm33.21) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable) [ 0.000000] BIOS-e820: 000000003ffd0000 - 000000003ffdf000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ffdf000 - 0000000040000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3ffd0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003ffd0000 (usable) [ 0.000000] modified: 000000003ffd0000 - 000000003ffdf000 (ACPI data) [ 0.000000] modified: 000000003ffdf000 - 0000000040000000 (ACPI NVS) [ 0.000000] modified: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 3f6a4000 - 3ff9fc7b [ 0.000000] Allocated new RAMDISK: 008e8000 - 011e3c7b [ 0.000000] Move RAMDISK from 000000003f6a4000 - 000000003ff9fc7a to 008e8000 - 011e3c7a [ 0.000000] ACPI: RSDP 000fa7f0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 3ffd0000 00030 (v01 A M I OEMRSDT 02000622 MSFT 00000097) [ 0.000000] ACPI: FACP 3ffd0200 00081 (v01 A M I OEMFACP 02000622 MSFT 00000097) [ 0.000000] ACPI: DSDT 3ffd03f0 03F45 (v01 A0158 A0158000 00000000 INTL 02002026) [ 0.000000] ACPI: FACS 3ffdf000 00040 [ 0.000000] ACPI: APIC 3ffd0390 00054 (v01 A M I OEMAPIC 02000622 MSFT 00000097) [ 0.000000] ACPI: OEMB 3ffdf040 00040 (v01 A M I AMI_OEM 02000622 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008e3f18] TEXT DATA BSS ==> [0000100000 - 00008e3f18] [ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] [ 0.000000] #5 [00008e4000 - 00008e720c] BRK ==> [00008e4000 - 00008e720c] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008e8000 - 00011e3c7b] NEW RAMDISK ==> [00008e8000 - 00011e3c7b] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003ffd0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003ffd0 [ 0.000000] On node 0 totalpages: 261983 [ 0.000000] free_area_init_node: node 0, pgdat c079e9c0, node_mem_map c11e5200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 272 pages used for memmap [ 0.000000] HighMem zone: 34498 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bf780000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s36056 r0 d21288 u4194304 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259935 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5241600 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003ffd0) [ 0.000000] Memory: 1016028k/1048384k available (4696k kernel code, 31508k reserved, 2123k data, 664k init, 139080k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a9000 - 0xc084f000 ( 664 kB) [ 0.000000] .data : 0xc0596257 - 0xc07a8f88 (2123 kB) [ 0.000000] .text : 0xc0100000 - 0xc0596257 (4696 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1800.270 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.54 BogoMIPS (lpj=7201080) [ 0.004026] Security Framework initialized [ 0.004055] AppArmor: AppArmor initialized [ 0.004064] Mount-cache hash table entries: 512 [ 0.004199] Initializing cgroup subsys ns [ 0.004204] Initializing cgroup subsys cpuacct [ 0.004209] Initializing cgroup subsys memory [ 0.004218] Initializing cgroup subsys devices [ 0.004221] Initializing cgroup subsys freezer [ 0.004223] Initializing cgroup subsys net_cls [ 0.004244] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004247] CPU: L2 Cache: 128K (64 bytes/line) [ 0.004252] mce: CPU supports 5 MCE banks [ 0.004270] Performance Events: AMD PMU driver. [ 0.004277] ... version: 0 [ 0.004279] ... bit width: 48 [ 0.004281] ... generic registers: 4 [ 0.004284] ... value mask: 0000ffffffffffff [ 0.004286] ... max period: 00007fffffffffff [ 0.004288] ... fixed-purpose events: 0 [ 0.004291] ... event mask: 000000000000000f [ 0.004295] Checking 'hlt' instruction... OK. [ 0.020715] SMP alternatives: switching to UP code [ 0.027336] Freeing SMP alternatives: 19k freed [ 0.027362] ACPI: Core revision 20090903 [ 0.033192] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.033199] ftrace: allocating 21817 entries in 43 pages [ 0.036109] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.040265] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.079961] CPU0: AMD Sempron(tm) Processor 3000+ stepping 02 [ 0.080001] Brought up 1 CPUs [ 0.080001] Total of 1 processors activated (3600.54 BogoMIPS). [ 0.080001] CPU0 attaching NULL sched-domain. [ 0.080001] devtmpfs: initialized [ 0.080001] regulator: core version 0.5 [ 0.080001] Time: 17:06:21 Date: 08/31/10 [ 0.080001] NET: Registered protocol family 16 [ 0.080001] EISA bus registered [ 0.080001] ACPI: bus type pci registered [ 0.080001] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 [ 0.080001] PCI: Using configuration type 1 for base access [ 0.080001] bio: create slab at 0 [ 0.080001] ACPI: EC: Look up EC in DSDT [ 0.083747] ACPI: Executed 1 blocks of module-level executable AML code [ 0.086389] ACPI: Interpreter enabled [ 0.086394] ACPI: (supports S0 S1 S3 S4 S5) [ 0.086420] ACPI: Using IOAPIC for interrupt routing [ 0.094973] ACPI Warning: Incorrect checksum in table [OEMB] - EF, should be E2 (20090903/tbutils-314) [ 0.095071] ACPI: No dock devices found. [ 0.095183] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.095233] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xefffffff] [ 0.095393] pci 0000:00:03.1: quirk: region 0800-083f claimed by ali7101 ACPI [ 0.095428] pci 0000:00:04.0: reg 10 io port: [0xc800-0xc8ff] [ 0.095434] pci 0000:00:04.0: reg 14 32bit mmio: [0xfaeff000-0xfaefffff] [ 0.095463] pci 0000:00:04.0: supports D1 D2 [ 0.095466] pci 0000:00:04.0: PME# supported from D2 D3hot D3cold [ 0.095471] pci 0000:00:04.0: PME# disabled [ 0.095497] pci 0000:00:0d.0: reg 10 io port: [0xc400-0xc4ff] [ 0.095503] pci 0000:00:0d.0: reg 14 32bit mmio: [0xfaefec00-0xfaefecff] [ 0.095523] pci 0000:00:0d.0: PME# supported from D3hot D3cold [ 0.095527] pci 0000:00:0d.0: PME# disabled [ 0.095554] pci 0000:00:0e.0: reg 20 io port: [0xff00-0xff0f] [ 0.095581] pci 0000:00:0e.1: reg 10 io port: [0xcc00-0xcc07] [ 0.095586] pci 0000:00:0e.1: reg 14 io port: [0xc080-0xc083] [ 0.095591] pci 0000:00:0e.1: reg 18 io port: [0xc000-0xc007] [ 0.095596] pci 0000:00:0e.1: reg 1c io port: [0xbc00-0xbc03] [ 0.095601] pci 0000:00:0e.1: reg 20 io port: [0xb880-0xb88f] [ 0.095625] pci 0000:00:0f.0: reg 10 32bit mmio: [0xfaef3000-0xfaef3fff] [ 0.095652] pci 0000:00:0f.1: reg 10 32bit mmio: [0xfaefc000-0xfaefcfff] [ 0.095681] pci 0000:00:0f.2: reg 10 32bit mmio: [0xfaefd000-0xfaefdfff] [ 0.095716] pci 0000:00:0f.3: reg 10 32bit mmio: [0xfaefe800-0xfaefe8ff] [ 0.095740] pci 0000:00:0f.3: PME# supported from D0 D3hot D3cold [ 0.095744] pci 0000:00:0f.3: PME# disabled [ 0.095852] pci 0000:01:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff] [ 0.095858] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xf0000000-0xf7ffffff] [ 0.095874] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfafe0000-0xfaffffff] [ 0.095915] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] [ 0.095919] pci 0000:00:01.0: bridge 32bit mmio: [0xfaf00000-0xfbffffff] [ 0.095924] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf9ffffff] [ 0.095956] pci 0000:02:05.0: reg 10 io port: [0xe800-0xe8ff] [ 0.095990] pci 0000:02:05.0: supports D1 D2 [ 0.096034] pci 0000:00:02.0: bridge io port: [0xe000-0xefff] [ 0.096047] pci_bus 0000:00: on NUMA node 0 [ 0.096052] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.096137] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.096182] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HTT_._PRT] [ 0.105029] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.105202] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.105372] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.105539] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.105705] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.105871] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.106038] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.106204] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9 [ 0.106370] ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.106494] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.106497] vgaarb: loaded [ 0.106628] SCSI subsystem initialized [ 0.106707] libata version 3.00 loaded. [ 0.106790] usbcore: registered new interface driver usbfs [ 0.106804] usbcore: registered new interface driver hub [ 0.106831] usbcore: registered new device driver usb [ 0.106990] ACPI: WMI: Mapper loaded [ 0.106993] PCI: Using ACPI for IRQ routing [ 0.107155] NetLabel: Initializing [ 0.107157] NetLabel: domain hash size = 128 [ 0.107159] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.107172] NetLabel: unlabeled traffic allowed by default [ 0.107237] Switching to clocksource tsc [ 0.108001] AppArmor: AppArmor Filesystem Enabled [ 0.108001] pnp: PnP ACPI init [ 0.108001] ACPI: bus type pnp registered [ 0.111883] pnp: PnP ACPI: found 12 devices [ 0.111887] ACPI: ACPI bus type pnp unregistered [ 0.111891] PnPBIOS: Disabled by ACPI PNP [ 0.111907] system 00:08: ioport range 0xc00-0xc0f has been reserved [ 0.111910] system 00:08: ioport range 0xd00-0xd0f has been reserved [ 0.111913] system 00:08: ioport range 0xa20-0xa2f has been reserved [ 0.111917] system 00:08: ioport range 0xa30-0xa3f has been reserved [ 0.111923] system 00:09: ioport range 0x400-0x40f has been reserved [ 0.111927] system 00:09: ioport range 0x480-0x48f has been reserved [ 0.111930] system 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 0.111934] system 00:09: ioport range 0x800-0x87f could not be reserved [ 0.111938] system 00:09: iomem range 0xfff80000-0xffffffff has been reserved [ 0.111942] system 00:09: iomem range 0xffb00000-0xffbbffff has been reserved [ 0.111948] system 00:0a: iomem range 0xffbc0000-0xffbfffff has been reserved [ 0.111952] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.111956] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.111962] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 0.111966] system 00:0b: iomem range 0xc0000-0xdffff could not be reserved [ 0.111970] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved [ 0.111973] system 00:0b: iomem range 0x100000-0x3fffffff could not be reserved [ 0.146662] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.146666] pci 0000:00:01.0: IO window: 0xd000-0xdfff [ 0.146672] pci 0000:00:01.0: MEM window: 0xfaf00000-0xfbffffff [ 0.146676] pci 0000:00:01.0: PREFETCH window: 0xf0000000-0xf9ffffff [ 0.146683] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02 [ 0.146686] pci 0000:00:02.0: IO window: 0xe000-0xefff [ 0.146691] pci 0000:00:02.0: MEM window: disabled [ 0.146695] pci 0000:00:02.0: PREFETCH window: disabled [ 0.146708] pci 0000:00:01.0: setting latency timer to 64 [ 0.146714] pci 0000:00:02.0: setting latency timer to 64 [ 0.146720] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.146723] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.146726] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] [ 0.146729] pci_bus 0000:01: resource 1 mem: [0xfaf00000-0xfbffffff] [ 0.146732] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf9ffffff] [ 0.146736] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] [ 0.146778] NET: Registered protocol family 2 [ 0.146878] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.147281] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.148475] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.149077] TCP: Hash tables configured (established 131072 bind 65536) [ 0.149081] TCP reno registered [ 0.149188] NET: Registered protocol family 1 [ 0.624662] pci 0000:01:00.0: Boot video device [ 0.624862] cpufreq-nforce2: No nForce2 chipset. [ 0.624891] Scanning for low memory corruption every 60 seconds [ 0.625017] audit: initializing netlink socket (disabled) [ 0.625034] type=2000 audit(1283274381.624:1): initialized [ 0.636297] Trying to unpack rootfs image as initramfs... [ 3.107501] highmem bounce pool size: 64 pages [ 3.107508] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 3.109342] VFS: Disk quotas dquot_6.5.2 [ 3.109413] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 3.110063] fuse init (API version 7.13) [ 3.110168] msgmni has been set to 1713 [ 3.110422] alg: No test for stdrng (krng) [ 3.110505] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 3.110509] io scheduler noop registered [ 3.110511] io scheduler anticipatory registered [ 3.110513] io scheduler deadline registered [ 3.110556] io scheduler cfq registered (default) [ 3.110683] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.110707] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 3.110812] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 3.110817] ACPI: Power Button [PWRB] [ 3.110867] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 3.110871] ACPI: Power Button [PWRF] [ 3.111120] processor LNXCPU:00: registered as cooling_device0 [ 3.115462] isapnp: Scanning for PnP cards... [ 3.122396] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.122494] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.122793] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.123926] brd: module loaded [ 3.124489] loop: module loaded [ 3.124615] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 3.124792] alloc irq_desc for 19 on node -1 [ 3.124795] alloc kstat_irqs on node -1 [ 3.124802] pata_acpi 0000:00:0e.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 3.124855] pata_acpi 0000:00:0e.0: PCI INT A disabled [ 3.125194] Fixed MDIO Bus: probed [ 3.125232] PPP generic driver version 2.4.2 [ 3.125296] tun: Universal TUN/TAP device driver, 1.6 [ 3.125299] tun: (C) 1999-2004 Max Krasnyansky [ 3.125390] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.125411] alloc irq_desc for 23 on node -1 [ 3.125414] alloc kstat_irqs on node -1 [ 3.125421] ehci_hcd 0000:00:0f.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 3.125444] ehci_hcd 0000:00:0f.3: EHCI Host Controller [ 3.125482] ehci_hcd 0000:00:0f.3: new USB bus registered, assigned bus number 1 [ 3.125512] ehci_hcd 0000:00:0f.3: debug port 1 [ 3.169074] ehci_hcd 0000:00:0f.3: irq 23, io mem 0xfaefe800 [ 3.212590] ehci_hcd 0000:00:0f.3: USB 2.0 started, EHCI 1.00 [ 3.212689] usb usb1: configuration #1 chosen from 1 choice [ 3.212720] hub 1-0:1.0: USB hub found [ 3.212731] hub 1-0:1.0: 8 ports detected [ 3.212806] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.212827] alloc irq_desc for 20 on node -1 [ 3.212829] alloc kstat_irqs on node -1 [ 3.212836] ohci_hcd 0000:00:0f.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 3.212852] ohci_hcd 0000:00:0f.0: OHCI Host Controller [ 3.212902] ohci_hcd 0000:00:0f.0: new USB bus registered, assigned bus number 2 [ 3.212938] ohci_hcd 0000:00:0f.0: irq 20, io mem 0xfaef3000 [ 3.302039] usb usb2: configuration #1 chosen from 1 choice [ 3.302069] hub 2-0:1.0: USB hub found [ 3.302081] hub 2-0:1.0: 3 ports detected [ 3.302136] alloc irq_desc for 21 on node -1 [ 3.302138] alloc kstat_irqs on node -1 [ 3.302145] ohci_hcd 0000:00:0f.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 3.302158] ohci_hcd 0000:00:0f.1: OHCI Host Controller [ 3.302197] ohci_hcd 0000:00:0f.1: new USB bus registered, assigned bus number 3 [ 3.302231] ohci_hcd 0000:00:0f.1: irq 21, io mem 0xfaefc000 [ 3.391246] usb usb3: configuration #1 chosen from 1 choice [ 3.391276] hub 3-0:1.0: USB hub found [ 3.391287] hub 3-0:1.0: 3 ports detected [ 3.391341] alloc irq_desc for 22 on node -1 [ 3.391343] alloc kstat_irqs on node -1 [ 3.391354] ohci_hcd 0000:00:0f.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 3.391368] ohci_hcd 0000:00:0f.2: OHCI Host Controller [ 3.391410] ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 4 [ 3.391445] ohci_hcd 0000:00:0f.2: irq 22, io mem 0xfaefd000 [ 3.478414] isapnp: No Plug & Play device found [ 3.480514] usb usb4: configuration #1 chosen from 1 choice [ 3.480549] hub 4-0:1.0: USB hub found [ 3.480563] hub 4-0:1.0: 3 ports detected [ 3.480620] uhci_hcd: USB Universal Host Controller Interface driver [ 3.480722] PNP: No PS/2 controller found. Probing ports directly. [ 3.482992] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.482999] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.483103] mice: PS/2 mouse device common for all mice [ 3.483210] rtc_cmos 00:02: RTC can wake from S4 [ 3.483254] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 3.483283] rtc0: alarms up to one month, 114 bytes nvram [ 3.483412] device-mapper: uevent: version 1.0.3 [ 3.488203] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 3.488286] device-mapper: multipath: version 1.1.0 loaded [ 3.488290] device-mapper: multipath round-robin: version 1.0.0 loaded [ 3.492180] EISA: Probing bus 0 at eisa.0 [ 3.492202] Cannot allocate resource for EISA slot 5 [ 3.492215] EISA: Detected 0 cards. [ 3.492289] cpuidle: using governor ladder [ 3.492291] cpuidle: using governor menu [ 3.492727] TCP cubic registered [ 3.492895] NET: Registered protocol family 10 [ 3.493728] NET: Registered protocol family 17 [ 3.493780] powernow-k8: Found 1 AMD Sempron(tm) Processor 3000+ processors (1 cpu cores) (version 2.20.00) [ 3.495990] [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects [ 3.500053] Using IPI No-Shortcut mode [ 3.500174] PM: Resume from disk failed. [ 3.500187] registered taskstats version 1 [ 3.500371] Magic number: 6:211:139 [ 3.500392] block ram4: hash matches [ 3.500427] acpi device:10: hash matches [ 3.500456] rtc_cmos 00:02: setting system clock to 2010-08-31 17:06:25 UTC (1283274385) [ 3.500460] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.500462] EDD information not available. [ 3.562359] Freeing initrd memory: 9199k freed [ 3.572669] Freeing unused kernel memory: 664k freed [ 3.573478] Write protecting the kernel text: 4700k [ 3.573512] Write protecting the kernel read-only data: 1844k [ 3.607403] udev: starting version 151 [ 3.678773] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio1/input/input3 [ 3.847965] Floppy drive(s): fd0 is 1.44M [ 3.848047] sata_uli 0000:00:0e.1: version 1.3 [ 3.848063] sata_uli 0000:00:0e.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 3.849911] Linux agpgart interface v0.103 [ 3.856650] scsi0 : sata_uli [ 3.864492] scsi1 : sata_uli [ 3.864569] ata1: SATA max UDMA/133 cmd 0xcc00 ctl 0xc080 bmdma 0xb880 irq 19 [ 3.864574] ata2: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 19 [ 3.864637] pata_ali 0000:00:0e.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 3.867726] FDC 0 is a post-1991 82077 [ 3.867764] scsi2 : pata_ali [ 3.870178] scsi3 : pata_ali [ 3.871895] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 3.871899] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 3.872196] agpgart-ali 0000:00:00.0: unsupported ALi chipset [10b9/1689]) [ 3.896020] usb 2-1: new full speed USB device using ohci_hcd and address 2 [ 3.970354] [drm] Initialized drm 1.1.0 20060810 [ 4.142971] usb 2-1: configuration #1 chosen from 1 choice [ 4.165653] usbcore: registered new interface driver hiddev [ 4.174309] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:0f.0/usb2/2-1/2-1:1.0/input/input4 [ 4.174514] generic-usb 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:0f.0-1/input0 [ 4.191901] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:0f.0/usb2/2-1/2-1:1.1/input/input5 [ 4.192221] generic-usb 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:0f.0-1/input1 [ 4.249226] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:0f.0/usb2/2-1/2-1:1.2/input/input6 [ 4.249687] generic-usb 0003:045E:0745.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:0f.0-1/input2 [ 4.249733] usbcore: registered new interface driver usbhid [ 4.249866] usbhid: v2.6:USB HID core driver [ 4.332048] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 4.340376] ata1.00: ATA-6: ST3160827AS, 3.42, max UDMA/133 [ 4.340380] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 4.356266] ata1.00: configured for UDMA/133 [ 4.356390] scsi 0:0:0:0: Direct-Access ATA ST3160827AS 3.42 PQ: 0 ANSI: 5 [ 4.356572] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.356924] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 4.356971] sd 0:0:0:0: [sda] Write Protect is off [ 4.356975] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.357001] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.357160] sda: sda1 sda2 < sda5 > [ 4.386566] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.856258] ata4.01: ATAPI: TSSTcorpCD/DVDW SH-W162C, TS10, max UDMA/33 [ 4.856284] ata4.01: WARNING: ATAPI DMA disabled for reliability issues. It can be enabled [ 4.856287] ata4.01: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node. [ 4.888160] ata4.01: configured for UDMA/33 [ 4.888917] scsi 3:0:1:0: CD-ROM TSSTcorp CD/DVDW SH-W162C TS10 PQ: 0 ANSI: 5 [ 4.892910] sr0: scsi3-mmc drive: 32x/40x writer cd/rw xa/form2 cdda tray [ 4.892916] Uniform CD-ROM driver Revision: 3.20 [ 4.893288] sr 3:0:1:0: Attached scsi CD-ROM sr0 [ 4.893461] sr 3:0:1:0: Attached scsi generic sg1 type 5 [ 4.908456] agpgart-amd64 0000:00:00.0: AGP bridge [10b9/1689] [ 4.908466] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB [ 4.908472] agpgart-amd64 0000:00:00.0: setting up ULi AGP [ 4.937587] agpgart-amd64 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 4.962958] alloc irq_desc for 16 on node -1 [ 4.962963] alloc kstat_irqs on node -1 [ 4.962971] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.966931] [drm] nouveau 0000:01:00.0: Detected an NV30 generation card (0x034200b1) [ 4.967017] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM [ 5.106925] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 5.107170] [drm] nouveau 0000:01:00.0: BMP BIOS found [ 5.107174] [drm] nouveau 0000:01:00.0: BMP version 5.41 [ 5.107177] [drm] nouveau 0000:01:00.0: Bios version 04.34.20.87 [ 5.107181] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2 [ 5.107185] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 000088b8 [ 5.107189] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02010310 000088b8 [ 5.107192] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01010312 00000000 [ 5.107195] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02020321 00000733 [ 5.107398] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode [ 5.107402] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xED03 [ 5.120076] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xEF9E [ 5.120088] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF0E4 [ 5.120136] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF26D [ 5.120141] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF28A [ 5.120147] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xF2A7 [ 5.128030] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xF440 [ 5.149302] [TTM] Zone kernel: Available graphics memory: 443614 kiB. [ 5.149306] [TTM] Zone highmem: Available graphics memory: 513154 kiB. [ 5.149321] [drm] nouveau 0000:01:00.0: 128 MiB VRAM [ 5.149373] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge [ 5.149385] agpgart: modprobe tried to set rate=x12. Setting to AGP3 x8 mode. [ 5.149497] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode [ 5.149530] nouveau 0000:01:00.0: putting AGP V3 device into 8x mode [ 5.149538] [drm] nouveau 0000:01:00.0: 256 MiB GART (aperture) [ 5.150057] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0 [ 5.151403] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0 [ 5.151415] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0 [ 5.151422] [drm] nouveau 0000:01:00.0: Saving VGA fonts [ 5.200775] [drm] nouveau 0000:01:00.0: Detected a VGA connector [ 5.201114] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector [ 5.201620] [drm] nouveau 0000:01:00.0: Detected a TV connector [ 5.203032] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 5.203036] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [ 5.203040] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2) [ 5.203044] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) [ 5.400198] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo f6b02400 [ 5.400392] fb0: nouveaufb frame buffer device [ 5.400395] registered panic notifier [ 5.400566] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 [ 5.403739] vga16fb: initializing [ 5.403747] vga16fb: mapped to 0xc00a0000 [ 5.403754] vga16fb: not registering due to another framebuffer present [ 5.428826] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [ 5.428832] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A [ 5.433644] Console: switching to colour frame buffer device 160x64 [ 6.221627] xor: automatically using best checksumming function: pIII_sse [ 6.240006] pIII_sse : 5415.000 MB/sec [ 6.240009] xor: using function: pIII_sse (5415.000 MB/sec) [ 6.243911] device-mapper: dm-raid45: initialized v0.2594b [ 19.765035] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 19.797411] ISO 9660 Extensions: RRIP_1991A [ 19.870901] aufs 2-standalone.tree-20091207 [ 19.954700] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 64.090315] udev: starting version 151 [ 66.576732] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 66.628742] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) [ 66.628786] alloc irq_desc for 17 on node -1 [ 66.628789] alloc kstat_irqs on node -1 [ 66.628797] uli526x 0000:00:0d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 66.771447] eth0: ULi M5263 at pci0000:00:0d.0, 00:18:f3:44:1a:39, irq 17. [ 67.160392] ali1563_smbus 0000:00:03.0: Found ALi1563 SMBus at 0x0400 [ 67.207180] ali1535_smbus 0000:00:03.1: ALI1535_smb region uninitialized - upgrade BIOS? [ 67.207186] ali1535_smbus 0000:00:03.1: ALI1535 not detected, module not inserted. [ 67.553253] ali15x3_smbus 0000:00:03.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr [ 67.553260] ali15x3_smbus 0000:00:03.1: ALI15X3 not detected, module not inserted. [ 68.195140] parport_pc 00:07: reported by Plug and Play ACPI [ 68.195184] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 68.571888] ppdev: user-space parallel port driver [ 71.454173] alloc irq_desc for 18 on node -1 [ 71.454178] alloc kstat_irqs on node -1 [ 71.454187] Intel ICH 0000:00:04.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 71.612469] C-Media PCI 0000:02:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 71.612548] cannot enable MPU-401 port at 0x330 [ 72.051025] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 72.470744] AC'97 0 does not respond - RESET [ 72.470900] Intel ICH 0000:00:04.0: PCI INT A disabled [ 72.470916] Intel ICH: probe of 0000:00:04.0 failed with error -13 [ 75.048828] uli526x: eth0 NIC Link is Down [ 76.805178] lp0: using parport0 (interrupt-driven). [ 84.406271] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 84.407451] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 159.116753] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 159.123944] SGI XFS Quota Management subsystem [ 159.218262] JFS: nTxBlock = 8018, nTxLock = 64144 [ 159.346556] NTFS driver 2.1.29 [Flags: R/O MODULE]. [ 159.542486] QNX4 filesystem 0.2.3 registered. [ 159.839845] Btrfs loaded [ 187.100497] end_request: I/O error, dev fd0, sector 0 [ 199.256157] end_request: I/O error, dev fd0, sector 0 [ 1562.026468] [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1 [ 1564.412674] end_request: I/O error, dev fd0, sector 0 [ 1567.187033] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 1567.188434] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 1576.600400] end_request: I/O error, dev fd0, sector 0 [ 2440.083145] end_request: I/O error, dev fd0, sector 0 [ 2452.254876] end_request: I/O error, dev fd0, sector 0 [ 3024.883463] Adding 1236984k swap on /dev/sda7. Priority:-1 extents:1 across:1236984k [ 3044.026116] EXT4-fs (sda6): mounted filesystem with ordered data mode [ 3503.420351] uli526x: eth0 NIC Link is Up 100 Mbps Full duplex [ 3503.420596] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 3513.744018] eth0: no IPv6 routers present