[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-8-generic (buildd@vernadsky) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000013ef0000 (usable) [ 0.000000] BIOS-e820: 0000000013ef0000 - 0000000013eff000 (ACPI data) [ 0.000000] BIOS-e820: 0000000013eff000 - 0000000013f00000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000013f00000 - 0000000014000000 (usable) [ 0.000000] BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: Compaq Presario 1215EA 470016-869/0704h, BIOS 4.06CJ15 07/20/2001 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x14000 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DBFFF uncachable [ 0.000000] DC000-E3FFF write-back [ 0.000000] E4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FF0000000 write-back [ 0.000000] 1 base 010000000 mask FFC000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000014000000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0014000000 page 2M [ 0.000000] kernel direct mapping tables up to 14000000 @ 1bfc000-1c00000 [ 0.000000] RAMDISK: 12a82000 - 136bd000 [ 0.000000] ACPI: RSDP 000f73b0 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 13efba54 0002C (v01 PTLTD RSDT 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 13efee53 00074 (v01 COMPAQ ZEPPELIN 06040000 PTL_ 000F4240) [ 0.000000] ACPI: DSDT 13efba80 033D3 (v01 Compaq Zeppelin 06040000 MSFT 0100000B) [ 0.000000] ACPI: FACS 13efffc0 00040 [ 0.000000] ACPI: SSDT 13efeec7 00139 (v01 PTLTD POWERNOW 06040000 LTP 00000001) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 320MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 14000000 [ 0.000000] low ram: 0 - 14000000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00014000 [ 0.000000] HighMem empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00013ef0 [ 0.000000] 0: 0x00013f00 -> 0x00014000 [ 0.000000] On node 0 totalpages: 81791 [ 0.000000] free_area_init_node: node 0, pgdat c1784100, node_mem_map d3c6f200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 608 pages used for memmap [ 0.000000] Normal zone: 77200 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e5000 [ 0.000000] PM: Registered nosave memory: 00000000000e5000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000013ef0000 - 0000000013eff000 [ 0.000000] PM: Registered nosave memory: 0000000013eff000 - 0000000013f00000 [ 0.000000] Allocating PCI resources starting at 14000000 (gap: 14000000:ebfe0000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @d3800000 s28800 r0 d24448 u4194304 [ 0.000000] pcpu-alloc: s28800 r0 d24448 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 81151 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=249cee57-54a5-437c-a84f-f7141b7ca88a ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 1638080 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 300648k/327680k available (5188k kernel code, 26516k reserved, 2540k data, 700k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xd4800000 - 0xff7fe000 ( 687 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd4000000 ( 320 MB) [ 0.000000] .init : 0xc178d000 - 0xc183c000 ( 700 kB) [ 0.000000] .data : 0xc15112a1 - 0xc178c480 (2540 kB) [ 0.000000] .text : 0xc1000000 - 0xc15112a1 (5188 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 [ 0.000000] CPU 0 irqstacks, hard=d2406000 soft=d2408000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 996.550 MHz processor. [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 1993.10 BogoMIPS (lpj=3986200) [ 0.004022] pid_max: default: 32768 minimum: 301 [ 0.004104] Security Framework initialized [ 0.004171] AppArmor: AppArmor initialized [ 0.004177] Yama: becoming mindful. [ 0.004354] Mount-cache hash table entries: 512 [ 0.004748] Initializing cgroup subsys ns [ 0.004760] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.004771] Initializing cgroup subsys cpuacct [ 0.004785] Initializing cgroup subsys memory [ 0.004815] Initializing cgroup subsys devices [ 0.004824] Initializing cgroup subsys freezer [ 0.004832] Initializing cgroup subsys net_cls [ 0.004839] Initializing cgroup subsys blkio [ 0.004935] mce: CPU supports 4 MCE banks [ 0.005907] SMP alternatives: switching to UP code [ 0.023687] Freeing SMP alternatives: 20k freed [ 0.023756] ACPI: Core revision 20110112 [ 0.028567] ACPI: setting ELCR to 0400 (from 0a20) [ 0.032062] ftrace: allocating 23640 entries in 47 pages [ 0.036268] weird, boot CPU (#0) not listed by the BIOS. [ 0.036277] SMP motherboard not detected. [ 0.036284] Local APIC not detected. Using dummy APIC emulation. [ 0.036288] SMP disabled [ 0.036293] Performance Events: [ 0.036301] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.036305] no hardware sampling interrupt available. [ 0.036313] AMD PMU driver. [ 0.036328] ... version: 0 [ 0.036332] ... bit width: 48 [ 0.036335] ... generic registers: 4 [ 0.036340] ... value mask: 0000ffffffffffff [ 0.036344] ... max period: 00007fffffffffff [ 0.036348] ... fixed-purpose events: 0 [ 0.036352] ... event mask: 000000000000000f [ 0.037959] Brought up 1 CPUs [ 0.037970] Total of 1 processors activated (1993.10 BogoMIPS). [ 0.040290] devtmpfs: initialized [ 0.043873] print_constraints: dummy: [ 0.043935] Time: 14:56:38 Date: 06/19/11 [ 0.044125] NET: Registered protocol family 16 [ 0.044457] EISA bus registered [ 0.044484] ACPI: bus type pci registered [ 0.044963] PCI: PCI BIOS revision 2.10 entry at 0xfd83f, last bus=1 [ 0.044969] PCI: Using configuration type 1 for base access [ 0.047853] bio: create slab at 0 [ 0.049355] ACPI: EC: Look up EC in DSDT [ 0.054686] ACPI: Interpreter enabled [ 0.054698] ACPI: (supports S0 S1 S4 S5) [ 0.054739] ACPI: Using PIC for interrupt routing [ 0.061815] ACPI: EC: GPE = 0x6, I/O: command/status = 0x66, data = 0x62 [ 0.062001] ACPI: No dock devices found. [ 0.062007] HEST: Table not found. [ 0.062018] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.062171] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.062454] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.062462] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.062471] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.062478] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dbfff] (ignored) [ 0.062485] pci_root PNP0A03:00: host bridge window [mem 0x14000000-0xffdfffff] (ignored) [ 0.062519] pci 0000:00:00.0: [1106:0305] type 0 class 0x000600 [ 0.062537] pci 0000:00:00.0: reg 10: [mem 0xf8000000-0xfbffffff pref] [ 0.062577] pci 0000:00:00.0: Disabling VIA memory write queue (PCI ID 0305, rev 03): [55] 8f & 1f -> 0f [ 0.062628] pci 0000:00:01.0: [1106:8305] type 1 class 0x000604 [ 0.062673] pci 0000:00:01.0: supports D1 [ 0.062703] pci 0000:00:07.0: [1106:0686] type 0 class 0x000601 [ 0.062792] pci 0000:00:07.1: [1106:0571] type 0 class 0x000101 [ 0.062839] pci 0000:00:07.1: reg 20: [io 0x1820-0x182f] [ 0.062898] pci 0000:00:07.2: [1106:3038] type 0 class 0x000c03 [ 0.062944] pci 0000:00:07.2: reg 20: [io 0x1800-0x181f] [ 0.063006] pci 0000:00:07.4: [1106:3057] type 0 class 0x000601 [ 0.063077] pci 0000:00:07.4: quirk: [io 0x8000-0x80ff] claimed by vt82c586 ACPI [ 0.063087] pci 0000:00:07.4: quirk: [io 0x8100-0x810f] claimed by vt82c686 SMB [ 0.063128] pci 0000:00:07.5: [1106:3058] type 0 class 0x000401 [ 0.063148] pci 0000:00:07.5: reg 10: [io 0x1000-0x10ff] [ 0.063161] pci 0000:00:07.5: reg 14: [io 0x1834-0x1837] [ 0.063174] pci 0000:00:07.5: reg 18: [io 0x1830-0x1833] [ 0.063249] pci 0000:00:09.0: [14f1:1803] type 0 class 0x000200 [ 0.063267] pci 0000:00:09.0: reg 10: [io 0x1400-0x14ff] [ 0.063280] pci 0000:00:09.0: reg 14: [mem 0xf4000000-0xf4003fff] [ 0.063334] pci 0000:00:09.0: PME# supported from D3hot D3cold [ 0.063342] pci 0000:00:09.0: PME# disabled [ 0.063368] pci 0000:00:09.1: [14f1:1815] type 0 class 0x000780 [ 0.063386] pci 0000:00:09.1: reg 10: [io 0x1838-0x183f] [ 0.063399] pci 0000:00:09.1: reg 14: [mem 0xf4004000-0xf4007fff] [ 0.063452] pci 0000:00:09.1: PME# supported from D3hot D3cold [ 0.063459] pci 0000:00:09.1: PME# disabled [ 0.063493] pci 0000:00:0a.0: [104c:ac50] type 2 class 0x000607 [ 0.063513] pci 0000:00:0a.0: reg 10: [mem 0x1c100000-0x1c100fff] [ 0.063536] pci 0000:00:0a.0: supports D1 D2 [ 0.063541] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.063549] pci 0000:00:0a.0: PME# disabled [ 0.063625] pci 0000:01:00.0: [1002:4c4d] type 0 class 0x000300 [ 0.063647] pci 0000:01:00.0: reg 10: [mem 0xf5000000-0xf5ffffff] [ 0.063660] pci 0000:01:00.0: reg 14: [io 0x9000-0x90ff] [ 0.063673] pci 0000:01:00.0: reg 18: [mem 0xf4100000-0xf4100fff] [ 0.063707] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.063734] pci 0000:01:00.0: supports D1 D2 [ 0.063778] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.063788] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff] [ 0.063796] pci 0000:00:01.0: bridge window [mem 0xf4100000-0xf5ffffff] [ 0.063806] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.063854] pci_bus 0000:00: on NUMA node 0 [ 0.063864] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.068091] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 9 *11 12) [ 0.068226] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 9 11 12) *0, disabled. [ 0.068389] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *9 11 12) [ 0.068547] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 11 12) [ 0.068845] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.068852] vgaarb: loaded [ 0.069493] SCSI subsystem initialized [ 0.069700] libata version 3.00 loaded. [ 0.069849] usbcore: registered new interface driver usbfs [ 0.069894] usbcore: registered new interface driver hub [ 0.069976] usbcore: registered new device driver usb [ 0.070273] wmi: Mapper loaded [ 0.070278] PCI: Using ACPI for IRQ routing [ 0.070289] PCI: pci_cache_line_size set to 32 bytes [ 0.070361] reserve RAM buffer: 000000000009f400 - 000000000009ffff [ 0.070369] reserve RAM buffer: 0000000013ef0000 - 0000000013ffffff [ 0.070676] NetLabel: Initializing [ 0.070682] NetLabel: domain hash size = 128 [ 0.070685] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.070718] NetLabel: unlabeled traffic allowed by default [ 0.070846] Switching to clocksource pit [ 0.092984] AppArmor: AppArmor Filesystem Enabled [ 0.093089] pnp: PnP ACPI init [ 0.093229] ACPI: bus type pnp registered [ 0.094723] pnp 00:00: [bus 00-ff] [ 0.094733] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.094741] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.094747] pnp 00:00: [io 0x0d00-0xffff window] [ 0.094754] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.094760] pnp 00:00: [mem 0x000d0000-0x000dbfff window] [ 0.094767] pnp 00:00: [mem 0x14000000-0xffdfffff window] [ 0.094897] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.094985] pnp 00:01: [dma 4] [ 0.094991] pnp 00:01: [io 0x0000-0x000f] [ 0.094998] pnp 00:01: [io 0x0081-0x008f] [ 0.095003] pnp 00:01: [io 0x00c0-0x00df] [ 0.095071] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.095114] pnp 00:02: [io 0x0070-0x0075] [ 0.095126] pnp 00:02: [irq 8] [ 0.095196] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.095257] pnp 00:03: [io 0x00f0-0x00ff] [ 0.095264] pnp 00:03: [irq 13] [ 0.095331] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.095389] pnp 00:04: [io 0x0061] [ 0.095471] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.095543] pnp 00:05: [mem 0x00000000-0x0009ffff] [ 0.095551] pnp 00:05: [mem 0x000e0000-0x000fffff] [ 0.095557] pnp 00:05: [mem 0xfffe0000-0xffffffff] [ 0.095563] pnp 00:05: [mem 0x000dc000-0x000dffff] [ 0.095680] system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.095689] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.095698] system 00:05: [mem 0xfffe0000-0xffffffff] has been reserved [ 0.095706] system 00:05: [mem 0x000dc000-0x000dffff] could not be reserved [ 0.095715] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.095761] pnp 00:06: [io 0x04d0-0x04d1] [ 0.095768] pnp 00:06: [io 0x0080] [ 0.095773] pnp 00:06: [io 0x0092] [ 0.095778] pnp 00:06: [io 0x00a8-0x00a9] [ 0.095784] pnp 00:06: [io 0x0220-0x022f] [ 0.095789] pnp 00:06: [io 0x0388-0x038b] [ 0.095794] pnp 00:06: [io 0x8000-0x808f] [ 0.095800] pnp 00:06: [io 0x0300-0x0307] [ 0.095823] pnp 00:06: disabling [io 0x8000-0x808f] because it overlaps 0000:00:07.4 BAR 13 [io 0x8000-0x80ff] [ 0.095910] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.095918] system 00:06: [io 0x0220-0x022f] has been reserved [ 0.095925] system 00:06: [io 0x0388-0x038b] has been reserved [ 0.095933] system 00:06: [io 0x0300-0x0307] has been reserved [ 0.095941] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.095983] pnp 00:07: [irq 12] [ 0.096053] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.096108] pnp 00:08: [io 0x0060] [ 0.096114] pnp 00:08: [io 0x0064] [ 0.096119] pnp 00:08: [irq 1] [ 0.096188] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.096939] pnp 00:09: [io 0x03f0-0x03f5] [ 0.096958] pnp 00:09: [io 0x03f7] [ 0.096964] pnp 00:09: [irq 6] [ 0.096970] pnp 00:09: [dma 2] [ 0.097083] pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.097979] pnp 00:0a: [io 0x0378-0x037b] [ 0.097987] pnp 00:0a: [io 0x0778-0x077b] [ 0.097993] pnp 00:0a: [irq 7] [ 0.097999] pnp 00:0a: [dma 3] [ 0.098150] pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.098342] pnp: PnP ACPI: found 11 devices [ 0.098348] ACPI: ACPI bus type pnp unregistered [ 0.098357] PnPBIOS: Disabled by ACPI PNP [ 0.137985] Switching to clocksource acpi_pm [ 0.138106] pci 0000:00:0a.0: BAR 15: assigned [mem 0x14000000-0x17ffffff pref] [ 0.138119] pci 0000:00:0a.0: BAR 16: assigned [mem 0x18000000-0x1bffffff] [ 0.138130] pci 0000:00:01.0: BAR 15: assigned [mem 0x1c000000-0x1c0fffff pref] [ 0.138142] pci 0000:00:0a.0: BAR 13: assigned [io 0x1c00-0x1cff] [ 0.138151] pci 0000:00:0a.0: BAR 14: assigned [io 0x2000-0x20ff] [ 0.138160] pci 0000:01:00.0: BAR 6: assigned [mem 0x1c000000-0x1c01ffff pref] [ 0.138169] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.138177] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff] [ 0.138188] pci 0000:00:01.0: bridge window [mem 0xf4100000-0xf5ffffff] [ 0.138197] pci 0000:00:01.0: bridge window [mem 0x1c000000-0x1c0fffff pref] [ 0.138208] pci 0000:00:0a.0: CardBus bridge to [bus 02-05] [ 0.138215] pci 0000:00:0a.0: bridge window [io 0x1c00-0x1cff] [ 0.138223] pci 0000:00:0a.0: bridge window [io 0x2000-0x20ff] [ 0.138232] pci 0000:00:0a.0: bridge window [mem 0x14000000-0x17ffffff pref] [ 0.138241] pci 0000:00:0a.0: bridge window [mem 0x18000000-0x1bffffff] [ 0.138269] pci 0000:00:01.0: setting latency timer to 64 [ 0.138291] pci 0000:00:0a.0: power state changed by ACPI to D0 [ 0.138300] pci 0000:00:0a.0: power state changed by ACPI to D0 [ 0.138662] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 0.138671] PCI: setting IRQ 11 as level-triggered [ 0.138684] pci 0000:00:0a.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 0.138697] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.138704] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.138711] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff] [ 0.138717] pci_bus 0000:01: resource 1 [mem 0xf4100000-0xf5ffffff] [ 0.138724] pci_bus 0000:01: resource 2 [mem 0x1c000000-0x1c0fffff pref] [ 0.138732] pci_bus 0000:02: resource 0 [io 0x1c00-0x1cff] [ 0.138738] pci_bus 0000:02: resource 1 [io 0x2000-0x20ff] [ 0.138745] pci_bus 0000:02: resource 2 [mem 0x14000000-0x17ffffff pref] [ 0.138751] pci_bus 0000:02: resource 3 [mem 0x18000000-0x1bffffff] [ 0.138887] NET: Registered protocol family 2 [ 0.139055] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.139561] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.139951] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.140319] TCP: Hash tables configured (established 16384 bind 16384) [ 0.140325] TCP reno registered [ 0.140334] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.140366] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.140610] NET: Registered protocol family 1 [ 0.140660] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.140672] pci 0000:00:07.0: Disabling VIA external APIC routing [ 0.140725] PCI: CLS mismatch (32 != 64), using 32 bytes [ 0.140737] pci 0000:01:00.0: Boot video device [ 0.141200] Switched to NOHz mode on CPU #0 [ 0.141569] cpufreq-nforce2: No nForce2 chipset. [ 0.141931] audit: initializing netlink socket (disabled) [ 0.141961] type=2000 audit(1308495398.138:1): initialized [ 0.164240] Trying to unpack rootfs image as initramfs... [ 0.192841] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.204535] VFS: Disk quotas dquot_6.5.2 [ 0.204706] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.206564] fuse init (API version 7.16) [ 0.206825] msgmni has been set to 587 [ 0.212783] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.216227] io scheduler noop registered [ 0.216240] io scheduler deadline registered [ 0.216381] io scheduler cfq registered (default) [ 0.216801] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.216889] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.217617] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.217952] ACPI: AC Adapter [AC] (on-line) [ 0.218135] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.218157] ACPI: Power Button [PWRB] [ 0.218266] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.218277] ACPI: Sleep Button [SLPB] [ 0.218410] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.218419] ACPI: Power Button [PWRF] [ 0.218624] ACPI: acpi_idle registered with cpuidle [ 0.218688] Marking TSC unstable due to TSC halts in idle [ 0.232748] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.232761] ACPI: Thermal Zone [THRM] (59 C) [ 0.232890] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.233161] ERST: Table is not found! [ 0.233472] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.236612] ACPI: Battery Slot [BAT0] (battery absent) [ 0.236642] isapnp: Scanning for PnP cards... [ 0.242962] Linux agpgart interface v0.103 [ 0.243143] agpgart: Detected VIA Twister-K/KT133x/KM133 chipset [ 0.305106] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 [ 0.308580] brd: module loaded [ 0.310188] loop: module loaded [ 0.310535] i2c-core: driver [adp5520] using legacy suspend method [ 0.310542] i2c-core: driver [adp5520] using legacy resume method [ 0.316537] Fixed MDIO Bus: probed [ 0.316693] PPP generic driver version 2.4.2 [ 0.316942] tun: Universal TUN/TAP device driver, 1.6 [ 0.316948] tun: (C) 1999-2004 Max Krasnyansky [ 0.317211] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.317281] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.317315] uhci_hcd: USB Universal Host Controller Interface driver [ 0.317842] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 [ 0.317851] PCI: setting IRQ 5 as level-triggered [ 0.317867] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5 [ 0.317890] uhci_hcd 0000:00:07.2: UHCI Host Controller [ 0.318031] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 [ 0.318090] uhci_hcd 0000:00:07.2: irq 5, io base 0x00001800 [ 0.318490] hub 1-0:1.0: USB hub found [ 0.318505] hub 1-0:1.0: 2 ports detected [ 0.318788] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.330889] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.330919] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.331460] mousedev: PS/2 mouse device common for all mice [ 0.332069] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.332114] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.332398] device-mapper: uevent: version 1.0.3 [ 0.332606] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 0.335137] device-mapper: multipath: version 1.2.0 loaded [ 0.335150] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.335498] EISA: Probing bus 0 at eisa.0 [ 0.335519] Cannot allocate resource for EISA slot 1 [ 0.335527] Cannot allocate resource for EISA slot 2 [ 0.335568] Cannot allocate resource for EISA slot 8 [ 0.335572] EISA: Detected 0 cards. [ 0.340242] cpuidle: using governor ladder [ 0.340355] cpuidle: using governor menu [ 0.341099] TCP cubic registered [ 0.341525] NET: Registered protocol family 10 [ 0.342826] NET: Registered protocol family 17 [ 0.342895] Registering the dns_resolver key type [ 0.342977] powernow-k8: Processor cpuid 661 not supported [ 0.343200] powernow: PowerNOW! Technology present. Can scale: frequency and voltage. [ 0.352338] powernow: SGTC: 10000 [ 0.352378] powernow: Minimum speed 498 MHz. Maximum speed 996 MHz. [ 0.352639] Using IPI No-Shortcut mode [ 0.353061] PM: Hibernation image not present or could not be loaded. [ 0.353097] registered taskstats version 1 [ 0.353396] Magic number: 15:801:940 [ 0.353655] rtc_cmos 00:02: setting system clock to 2011-06-19 14:56:39 UTC (1308495399) [ 0.353664] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.353669] EDD information not available. [ 0.361484] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.362212] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly. [ 0.659905] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 0.880498] isapnp: No Plug & Play device found [ 1.359639] Freeing initrd memory: 12524k freed [ 1.395957] Freeing unused kernel memory: 700k freed [ 1.398080] Write protecting the kernel text: 5192k [ 1.398172] Write protecting the kernel read-only data: 2148k [ 1.473760] <30>udev[60]: starting version 167 [ 1.968487] Floppy drive(s): fd0 is 1.44M [ 1.990530] FDC 0 is a post-1991 82077 [ 1.995297] pata_via 0000:00:07.1: version 0.3.4 [ 2.010424] Linux Tulip driver version 1.1.15 (Feb 27, 2007) [ 2.020757] scsi0 : pata_via [ 2.029344] scsi1 : pata_via [ 2.029544] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0x1820 irq 14 [ 2.029553] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0x1828 irq 15 [ 2.038076] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 2.038097] tulip 0000:00:09.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 2.039494] 0000:00:09.0: tulip_stop_rxtx() failed (CSR5 0xf40e8002 CSR6 0xe0040000) [ 2.054915] tulip0: MII transceiver #1 config 1000 status 782d advertising 01e1 [ 2.058731] tulip0: MII transceiver #0 config 1000 status 782d advertising 01e1 [ 2.144413] net eth0: Conexant LANfinity rev 8 at Port 0x1400, 00:50:8b:fb:3a:d8, IRQ 11 [ 2.192330] ata1.00: ATA-6: WDC WD400UE-22HCT0, 09.07D09, max UDMA/100 [ 2.192341] ata1.00: 78140160 sectors, multi 16: LBA [ 2.200245] ata1.00: configured for UDMA/66 [ 2.200592] scsi 0:0:0:0: Direct-Access ATA WDC WD400UE-22HC 09.0 PQ: 0 ANSI: 5 [ 2.201130] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.201545] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 2.201697] sd 0:0:0:0: [sda] Write Protect is off [ 2.201706] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.201769] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.256597] sda: sda1 sda2 < sda5 > [ 2.257485] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.380324] ata2.00: ATAPI: TSSTcorpCD/DVDW SN-S082D, SS03, max UDMA/33 [ 2.412247] ata2.00: configured for UDMA/33 [ 2.428456] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SN-S082D SS03 PQ: 0 ANSI: 5 [ 2.460318] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.460328] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.460697] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.460919] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.974966] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 5.885249] Adding 653308k swap on /dev/sda5. Priority:-1 extents:1 across:653308k [ 6.547210] <30>udev[239]: starting version 167 [ 7.076740] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 8.162607] lp: driver loaded but no devices found [ 8.462824] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.487475] parport_pc: VIA 686A/8231 detected [ 8.487488] parport_pc: probing current configuration [ 8.487514] parport_pc: Current parallel port base: 0x378 [ 8.487617] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 8.585174] lp0: using parport0 (interrupt-driven). [ 8.585186] parport_pc: VIA parallel port: io=0x378, irq=7 [ 8.822278] ppdev: user-space parallel port driver [ 8.845968] ACPI: resource vt596_smbus [io 0x8100-0x8107] conflicts with ACPI region SMIO [io 0x8100-0x8106] [ 8.845980] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.997915] yenta_cardbus 0000:00:0a.0: CardBus bridge found [0e11:b103] [ 8.997946] yenta_cardbus 0000:00:0a.0: Using CSCINT to route CSC interrupts to PCI [ 8.997953] yenta_cardbus 0000:00:0a.0: Routing CardBus interrupts to PCI [ 8.997964] yenta_cardbus 0000:00:0a.0: TI: mfunc 0x01001002, devctl 0x64 [ 10.190608] irq 11: nobody cared (try booting with the "irqpoll" option) [ 10.190621] Pid: 267, comm: modprobe Not tainted 2.6.38-8-generic #42-Ubuntu [ 10.190628] Call Trace: [ 10.190651] [] ? __report_bad_irq.clone.2+0x2c/0x90 [ 10.190660] [] ? handle_IRQ_event+0x4c/0x160 [ 10.190668] [] ? note_interrupt+0x15a/0x1a0 [ 10.190677] [] ? handle_level_irq+0xcc/0xf0 [ 10.190685] [] ? handle_level_irq+0x0/0xf0 [ 10.190692] [] ? do_IRQ+0x42/0xc0 [ 10.190722] [] ? scsi_decide_disposition+0x184/0x1b0 [ 10.190735] [] ? __do_softirq+0x0/0x170 [ 10.190746] [] ? common_interrupt+0x30/0x38 [ 10.190753] [] ? __do_softirq+0x0/0x170 [ 10.190761] [] ? __do_softirq+0x48/0x170 [ 10.190769] [] ? __do_softirq+0x0/0x170 [ 10.190773] [] ? irq_exit+0x6d/0x80 [ 10.190786] [] ? do_IRQ+0x4b/0xc0 [ 10.190801] [] ? console_unlock+0x98/0xe0 [ 10.190808] [] ? common_interrupt+0x30/0x38 [ 10.190825] [] ? _raw_spin_unlock_irqrestore+0x15/0x20 [ 10.190833] [] ? __setup_irq+0x17e/0x2f0 [ 10.190843] [] ? kmem_cache_alloc_trace+0xdd/0x100 [ 10.190850] [] ? request_threaded_irq+0x79/0x120 [ 10.190858] [] ? request_threaded_irq+0x79/0x120 [ 10.190878] [] ? yenta_probe_handler+0x0/0x50 [yenta_socket] [ 10.190886] [] ? request_threaded_irq+0xbc/0x120 [ 10.190898] [] ? yenta_probe_cb_irq+0x61/0x150 [yenta_socket] [ 10.190911] [] ? ti12xx_irqroute_func0+0x80/0x310 [yenta_socket] [ 10.190923] [] ? ti12xx_override+0x18f/0x1a0 [yenta_socket] [ 10.190935] [] ? ti1250_override+0x88/0x90 [yenta_socket] [ 10.190947] [] ? yenta_probe+0x229/0x3f9 [yenta_socket] [ 10.190960] [] ? local_pci_probe+0x47/0xb0 [ 10.190969] [] ? pci_device_probe+0x68/0x90 [ 10.190979] [] ? really_probe+0x4d/0x150 [ 10.190989] [] ? pm_runtime_barrier+0x4b/0xb0 [ 10.190997] [] ? driver_probe_device+0x3c/0x60 [ 10.191005] [] ? __driver_attach+0x81/0x90 [ 10.191012] [] ? __driver_attach+0x0/0x90 [ 10.191020] [] ? bus_for_each_dev+0x48/0x70 [ 10.191027] [] ? pci_device_remove+0x0/0xf0 [ 10.191035] [] ? driver_attach+0x1e/0x20 [ 10.191041] [] ? __driver_attach+0x0/0x90 [ 10.191048] [] ? bus_add_driver+0xb8/0x250 [ 10.191057] [] ? pci_device_remove+0x0/0xf0 [ 10.191064] [] ? driver_register+0x66/0x110 [ 10.191072] [] ? __pci_register_driver+0x45/0xb0 [ 10.191083] [] ? yenta_socket_init+0x17/0x1000 [yenta_socket] [ 10.191091] [] ? do_one_initcall+0x35/0x170 [ 10.191101] [] ? yenta_socket_init+0x0/0x1000 [yenta_socket] [ 10.191112] [] ? sys_init_module+0xdb/0x230 [ 10.191123] [] ? syscall_call+0x7/0xb [ 10.191128] handlers: [ 10.191132] [] (yenta_probe_handler+0x0/0x50 [yenta_socket]) [ 10.191145] Disabling IRQ #11 [ 11.477908] irq 11: nobody cared (try booting with the "irqpoll" option) [ 11.477928] Pid: 267, comm: modprobe Not tainted 2.6.38-8-generic #42-Ubuntu [ 11.477935] Call Trace: [ 11.477960] [] ? __report_bad_irq.clone.2+0x2c/0x90 [ 11.477969] [] ? handle_IRQ_event+0x4c/0x160 [ 11.477978] [] ? note_interrupt+0x15a/0x1a0 [ 11.477986] [] ? handle_level_irq+0xcc/0xf0 [ 11.477994] [] ? handle_level_irq+0x0/0xf0 [ 11.477999] [] ? do_IRQ+0x42/0xc0 [ 11.478028] [] ? scsi_decide_disposition+0x184/0x1b0 [ 11.478042] [] ? __do_softirq+0x0/0x170 [ 11.478052] [] ? common_interrupt+0x30/0x38 [ 11.478060] [] ? __do_softirq+0x0/0x170 [ 11.478067] [] ? __do_softirq+0x48/0x170 [ 11.478075] [] ? __do_softirq+0x0/0x170 [ 11.478080] [] ? irq_exit+0x6d/0x80 [ 11.478092] [] ? do_IRQ+0x4b/0xc0 [ 11.478099] [] ? free_irq+0x3d/0x70 [ 11.478107] [] ? common_interrupt+0x30/0x38 [ 11.478123] [] ? _raw_spin_unlock_irqrestore+0x15/0x20 [ 11.478130] [] ? __setup_irq+0x17e/0x2f0 [ 11.478140] [] ? kmem_cache_alloc_trace+0xdd/0x100 [ 11.478149] [] ? request_threaded_irq+0x79/0x120 [ 11.478156] [] ? request_threaded_irq+0x79/0x120 [ 11.478176] [] ? yenta_interrupt+0x0/0xd0 [yenta_socket] [ 11.478183] [] ? request_threaded_irq+0xbc/0x120 [ 11.478196] [] ? yenta_probe+0x259/0x3f9 [yenta_socket] [ 11.478209] [] ? local_pci_probe+0x47/0xb0 [ 11.478218] [] ? pci_device_probe+0x68/0x90 [ 11.478227] [] ? really_probe+0x4d/0x150 [ 11.478237] [] ? pm_runtime_barrier+0x4b/0xb0 [ 11.478245] [] ? driver_probe_device+0x3c/0x60 [ 11.478252] [] ? __driver_attach+0x81/0x90 [ 11.478259] [] ? __driver_attach+0x0/0x90 [ 11.478266] [] ? bus_for_each_dev+0x48/0x70 [ 11.478274] [] ? pci_device_remove+0x0/0xf0 [ 11.478281] [] ? driver_attach+0x1e/0x20 [ 11.478287] [] ? __driver_attach+0x0/0x90 [ 11.478294] [] ? bus_add_driver+0xb8/0x250 [ 11.478302] [] ? pci_device_remove+0x0/0xf0 [ 11.478309] [] ? driver_register+0x66/0x110 [ 11.478317] [] ? __pci_register_driver+0x45/0xb0 [ 11.478327] [] ? yenta_socket_init+0x17/0x1000 [yenta_socket] [ 11.478335] [] ? do_one_initcall+0x35/0x170 [ 11.478345] [] ? yenta_socket_init+0x0/0x1000 [yenta_socket] [ 11.478356] [] ? sys_init_module+0xdb/0x230 [ 11.478366] [] ? syscall_call+0x7/0xb [ 11.478372] handlers: [ 11.478376] [] (yenta_interrupt+0x0/0xd0 [yenta_socket]) [ 11.478389] Disabling IRQ #11 [ 11.604893] yenta_cardbus 0000:00:0a.0: ISA IRQ mask 0x0018, PCI irq 11 [ 11.604905] yenta_cardbus 0000:00:0a.0: Socket status: 30000006 [ 11.815499] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input4 [ 11.815934] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 12.050967] Synaptics Touchpad, model: 1, fw: 4.6, id: 0xf42a1, caps: 0x80471b/0x0/0x0 [ 12.081908] type=1400 audit(1308495411.226:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=407 comm="apparmor_parser" [ 12.083293] type=1400 audit(1308495411.226:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=406 comm="apparmor_parser" [ 12.085221] type=1400 audit(1308495411.230:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=407 comm="apparmor_parser" [ 12.085856] type=1400 audit(1308495411.230:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=407 comm="apparmor_parser" [ 12.087127] type=1400 audit(1308495411.230:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=406 comm="apparmor_parser" [ 12.087796] type=1400 audit(1308495411.230:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=406 comm="apparmor_parser" [ 12.091578] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 12.219785] via686a 0000:00:07.4: base address not set - upgrade BIOS or use force_addr=0xaddr [ 12.717120] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x220-0x22f 0x300-0x307 0x370-0x37f 0x388-0x38f [ 12.720235] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7 [ 12.721624] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 12.722782] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 12.724101] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xdc000-0xdffff 0xe4000-0xfffff [ 12.724238] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean. [ 12.724368] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean. [ 12.724504] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 15.465161] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 [ 15.465174] PCI: setting IRQ 9 as level-triggered [ 15.465190] VIA 82xx Audio 0000:00:07.5: PCI INT C -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9 [ 15.820081] VIA 82xx Audio 0000:00:07.5: setting latency timer to 64 [ 16.037849] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04B8 pid 0x083F [ 16.039443] usbcore: registered new interface driver usblp [ 16.157221] type=1400 audit(1308495415.302:8): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=650 comm="apparmor_parser" [ 16.167664] type=1400 audit(1308495415.310:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=652 comm="apparmor_parser" [ 16.169264] type=1400 audit(1308495415.314:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=652 comm="apparmor_parser" [ 16.169901] type=1400 audit(1308495415.314:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=652 comm="apparmor_parser" [ 17.098505] type=1400 audit(1308495416.242:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=653 comm="apparmor_parser" [ 17.112272] type=1400 audit(1308495416.258:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=653 comm="apparmor_parser" [ 17.128145] type=1400 audit(1308495416.274:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=653 comm="apparmor_parser" [ 18.200420] type=1400 audit(1308495417.346:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=664 comm="apparmor_parser" [ 18.201719] type=1400 audit(1308495417.346:16): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=664 comm="apparmor_parser" [ 19.054989] type=1400 audit(1308495418.198:17): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=665 comm="apparmor_parser" [ 19.136797] vesafb: framebuffer at 0xf5000000, mapped to 0xd4b80000, using 2304k, total 2304k [ 19.136810] vesafb: mode is 1024x768x24, linelength=3072, pages=0 [ 19.136816] vesafb: scrolling: redraw [ 19.136824] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 19.137526] Console: switching to colour frame buffer device 128x48 [ 19.137602] fb0: VESA VGA frame buffer device [ 19.203534] type=1400 audit(1308495418.346:18): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=692 comm="apparmor_parser" [ 19.225347] type=1400 audit(1308495418.370:19): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=692 comm="apparmor_parser" [ 35.056047] eth0: no IPv6 routers present [ 38.674281] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 281.531054] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 379.008351] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 379.008371] sr 1:0:0:0: CDB: Prevent/Allow Medium Removal: 1e 00 00 00 00 00 [ 379.008399] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [ 379.008402] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [ 379.008410] ata2.00: status: { DRDY } [ 384.048084] ata2: link is slow to respond, please be patient (ready=0) [ 389.032108] ata2: device not ready (errno=-16), forcing hardreset [ 389.032128] ata2: soft resetting link [ 389.244361] ata2.00: configured for UDMA/33 [ 389.252873] ata2: EH complete [ 389.252916] sr 1:0:0:0: ioctl_internal_command return code = 8000002 [ 389.252922] : Sense Key : Aborted Command [current] [descriptor] [ 389.252933] : Add. Sense: No additional sense information