[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-8-generic (buildd@allspice) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:24 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2) [ 0.000000] Command line: initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash -- BOOT_IMAGE=/casper/vmlinuz [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000099000 (usable) [ 0.000000] BIOS-e820: 0000000000099000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bff80000 (usable) [ 0.000000] BIOS-e820: 00000000bff80000 - 00000000bff8e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bff8e000 - 00000000bffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: ASUSTEK COMPUTER INC P5W DH Deluxe/P5W DH Deluxe, BIOS 3002 07/22/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x240000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 1 base 000000000 mask E00000000 write-back [ 0.000000] 2 base 200000000 mask FC0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbff80 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bff80000 [ 0.000000] 0000000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bff80000 page 4k [ 0.000000] kernel direct mapping tables up to bff80000 @ 1fffb000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000240000000 [ 0.000000] 0100000000 - 0240000000 page 2M [ 0.000000] kernel direct mapping tables up to 240000000 @ bff76000-bff80000 [ 0.000000] RAMDISK: 7f2bf000 - 7ffff000 [ 0.000000] ACPI: RSDP 00000000000faf00 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000bff80100 0004C (v01 A_M_I_ OEMXSDT 07001022 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000bff80290 000F4 (v03 A_M_I_ OEMFACP 07001022 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000bff80590 09554 (v01 A0543 A0543000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS 00000000bff8e000 00040 [ 0.000000] ACPI: APIC 00000000bff80390 00080 (v01 A_M_I_ OEMAPIC 07001022 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000bff8e040 00066 (v01 A_M_I_ AMI_OEM 07001022 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000bff89af0 00038 (v01 A_M_I_ OEMHPET 07001022 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000bff89b30 0003C (v01 A_M_I_ OEMMCFG 07001022 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000240000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000240000000 [ 0.000000] NODE_DATA [000000023fffb000 - 000000023fffffff] [ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880237e00000-ffff88023edfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00240000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x00000099 [ 0.000000] 0: 0x00000100 -> 0x000bff80 [ 0.000000] 0: 0x00100000 -> 0x00240000 [ 0.000000] On node 0 totalpages: 2096905 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3915 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 767928 pages, LIFO batch:31 [ 0.000000] Normal zone: 17920 pages used for memmap [ 0.000000] Normal zone: 1292800 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 0000000000099000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bff80000 - 00000000bff8e000 [ 0.000000] PM: Registered nosave memory: 00000000bff8e000 - 00000000bffe0000 [ 0.000000] PM: Registered nosave memory: 00000000bffe0000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000ffb00000 [ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3fb00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800bfc00000 s84416 r8192 d22080 u524288 [ 0.000000] pcpu-alloc: s84416 r8192 d22080 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064643 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash -- BOOT_IMAGE=/casper/vmlinuz [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8179324k/9437184k available (5940k kernel code, 1049564k absent, 208296k reserved, 5017k data, 956k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 83886080 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3000.861 MHz processor. [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6001.72 BogoMIPS (lpj=30008610) [ 0.000007] pid_max: default: 32768 minimum: 301 [ 0.000026] Security Framework initialized [ 0.000040] AppArmor: AppArmor initialized [ 0.000041] Yama: becoming mindful. [ 0.000699] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.014236] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.016584] Mount-cache hash table entries: 256 [ 0.016730] Initializing cgroup subsys ns [ 0.016735] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.016737] Initializing cgroup subsys cpuacct [ 0.016740] Initializing cgroup subsys memory [ 0.016748] Initializing cgroup subsys devices [ 0.016750] Initializing cgroup subsys freezer [ 0.016751] Initializing cgroup subsys net_cls [ 0.016753] Initializing cgroup subsys blkio [ 0.016784] CPU: Physical Processor ID: 0 [ 0.016786] CPU: Processor Core ID: 0 [ 0.016787] mce: CPU supports 6 MCE banks [ 0.016794] CPU0: Thermal monitoring enabled (TM2) [ 0.016798] using mwait in idle threads. [ 0.018732] ACPI: Core revision 20110112 [ 0.023816] ftrace: allocating 24314 entries in 96 pages [ 0.030044] Setting APIC routing to flat [ 0.030319] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.132260] CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 [ 0.140000] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver. [ 0.140000] PEBS disabled due to CPU errata. [ 0.140000] ... version: 2 [ 0.140000] ... bit width: 40 [ 0.140000] ... generic registers: 2 [ 0.140000] ... value mask: 000000ffffffffff [ 0.140000] ... max period: 000000007fffffff [ 0.140000] ... fixed-purpose events: 3 [ 0.140000] ... event mask: 0000000700000003 [ 0.140000] Booting Node 0, Processors #1 [ 0.300015] Brought up 2 CPUs [ 0.300018] Total of 2 processors activated (12004.07 BogoMIPS). [ 0.300517] devtmpfs: initialized [ 0.300646] print_constraints: dummy: [ 0.300665] Time: 21:00:45 Date: 05/03/11 [ 0.300692] NET: Registered protocol family 16 [ 0.300714] Trying to unpack rootfs image as initramfs... [ 0.300785] ACPI: bus type pci registered [ 0.300838] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.300840] PCI: not using MMCONFIG [ 0.300841] PCI: Using configuration type 1 for base access [ 1.300094] bio: create slab at 0 [ 1.301156] ACPI: EC: Look up EC in DSDT [ 1.302190] ACPI: Executed 1 blocks of module-level executable AML code [ 1.306740] ACPI: Interpreter enabled [ 1.306743] ACPI: (supports S0 S1 S3 S4 S5) [ 1.306759] ACPI: Using IOAPIC for interrupt routing [ 1.306778] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 1.307774] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources [ 1.319695] ACPI: No dock devices found. [ 1.319698] HEST: Table not found. [ 1.319700] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.319739] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.319827] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 1.319830] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 1.319832] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 1.319833] pci_root PNP0A08:00: host bridge window [mem 0xc0010000-0xffffffff] [ 1.319843] pci 0000:00:00.0: [8086:277c] type 0 class 0x000600 [ 1.319874] pci 0000:00:01.0: [8086:277d] type 1 class 0x000604 [ 1.319898] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.319900] pci 0000:00:01.0: PME# disabled [ 1.319933] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604 [ 1.319979] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.319982] pci 0000:00:1c.0: PME# disabled [ 1.320013] pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604 [ 1.320058] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 1.320061] pci 0000:00:1c.3: PME# disabled [ 1.320081] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03 [ 1.320116] pci 0000:00:1d.0: reg 20: [io 0xe480-0xe49f] [ 1.320140] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03 [ 1.320175] pci 0000:00:1d.1: reg 20: [io 0xe800-0xe81f] [ 1.320199] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03 [ 1.320233] pci 0000:00:1d.2: reg 20: [io 0xe880-0xe89f] [ 1.320258] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03 [ 1.320291] pci 0000:00:1d.3: reg 20: [io 0xec00-0xec1f] [ 1.320323] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03 [ 1.320339] pci 0000:00:1d.7: reg 10: [mem 0xeffffc00-0xefffffff] [ 1.320397] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.320401] pci 0000:00:1d.7: PME# disabled [ 1.320415] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 1.320462] pci 0000:00:1f.0: [8086:27b8] type 0 class 0x000601 [ 1.320531] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007) [ 1.320534] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 00ff) [ 1.320559] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101 [ 1.320570] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 1.320578] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 1.320586] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 1.320594] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 1.320602] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf] [ 1.320632] pci 0000:00:1f.2: [8086:27c3] type 0 class 0x000104 [ 1.320645] pci 0000:00:1f.2: reg 10: [io 0xe400-0xe407] [ 1.320652] pci 0000:00:1f.2: reg 14: [io 0xe080-0xe083] [ 1.320658] pci 0000:00:1f.2: reg 18: [io 0xe000-0xe007] [ 1.320665] pci 0000:00:1f.2: reg 1c: [io 0xdc00-0xdc03] [ 1.320672] pci 0000:00:1f.2: reg 20: [io 0xd880-0xd88f] [ 1.320678] pci 0000:00:1f.2: reg 24: [mem 0xeffff800-0xeffffbff] [ 1.320700] pci 0000:00:1f.2: PME# supported from D3hot [ 1.320703] pci 0000:00:1f.2: PME# disabled [ 1.320715] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05 [ 1.320757] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] [ 1.320811] pci 0000:04:00.0: [10de:05e2] type 0 class 0x000300 [ 1.320819] pci 0000:04:00.0: reg 10: [mem 0xee000000-0xeeffffff] [ 1.320829] pci 0000:04:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.320838] pci 0000:04:00.0: reg 1c: [mem 0xec000000-0xedffffff 64bit] [ 1.320844] pci 0000:04:00.0: reg 24: [io 0xcc00-0xcc7f] [ 1.320850] pci 0000:04:00.0: reg 30: [mem 0xefe80000-0xefefffff pref] [ 1.340014] pci 0000:00:01.0: PCI bridge to [bus 04-04] [ 1.340017] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 1.340019] pci 0000:00:01.0: bridge window [mem 0xe9e00000-0xefefffff] [ 1.340023] pci 0000:00:01.0: bridge window [mem 0xc1800000-0xe17fffff 64bit pref] [ 1.340057] pci 0000:00:1c.0: PCI bridge to [bus 03-03] [ 1.340060] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.340064] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 1.340068] pci 0000:00:1c.0: bridge window [mem 0xc1700000-0xc17fffff 64bit pref] [ 1.340120] pci 0000:02:00.0: [11ab:4362] type 0 class 0x000200 [ 1.340141] pci 0000:02:00.0: reg 10: [mem 0xe9dfc000-0xe9dfffff 64bit] [ 1.340152] pci 0000:02:00.0: reg 18: [io 0xb800-0xb8ff] [ 1.340191] pci 0000:02:00.0: reg 30: [mem 0xe9dc0000-0xe9ddffff pref] [ 1.340228] pci 0000:02:00.0: supports D1 D2 [ 1.340229] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.340233] pci 0000:02:00.0: PME# disabled [ 1.340245] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 1.340254] pci 0000:00:1c.3: PCI bridge to [bus 02-02] [ 1.340257] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff] [ 1.340260] pci 0000:00:1c.3: bridge window [mem 0xe9d00000-0xe9dfffff] [ 1.340264] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.340294] pci 0000:01:01.0: [1102:0005] type 0 class 0x000401 [ 1.340310] pci 0000:01:01.0: reg 10: [io 0xac00-0xac1f] [ 1.340322] pci 0000:01:01.0: reg 14: [mem 0xe9a00000-0xe9bfffff 64bit] [ 1.340334] pci 0000:01:01.0: reg 1c: [mem 0xe4000000-0xe7ffffff 64bit] [ 1.340366] pci 0000:01:01.0: supports D1 D2 [ 1.340404] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode) [ 1.340407] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff] [ 1.340411] pci 0000:00:1e.0: bridge window [mem 0xe1900000-0xe9cfffff] [ 1.340415] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.340417] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 1.340419] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 1.340421] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 1.340423] pci 0000:00:1e.0: bridge window [mem 0xc0010000-0xffffffff] (subtractive decode) [ 1.340439] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.340520] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 1.340545] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] [ 1.340594] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 1.340625] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] [ 1.340667] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 1.342792] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 1.342830] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 1.342866] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 1.342902] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 1.342937] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 1.342973] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 1.343008] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 1.343043] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 1.343141] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none [ 1.343144] vgaarb: loaded [ 1.343285] SCSI subsystem initialized [ 1.343332] libata version 3.00 loaded. [ 1.343366] usbcore: registered new interface driver usbfs [ 1.343374] usbcore: registered new interface driver hub [ 1.343395] usbcore: registered new device driver usb [ 1.343481] wmi: Mapper loaded [ 1.343483] PCI: Using ACPI for IRQ routing [ 1.343485] PCI: pci_cache_line_size set to 64 bytes [ 1.343538] reserve RAM buffer: 0000000000099000 - 000000000009ffff [ 1.343540] reserve RAM buffer: 00000000bff80000 - 00000000bfffffff [ 1.343616] NetLabel: Initializing [ 1.343617] NetLabel: domain hash size = 128 [ 1.343618] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.343629] NetLabel: unlabeled traffic allowed by default [ 1.343655] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 1.343659] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.343662] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 1.720070] Switching to clocksource hpet [ 1.727545] AppArmor: AppArmor Filesystem Enabled [ 1.727579] pnp: PnP ACPI init [ 1.727595] ACPI: bus type pnp registered [ 1.727688] pnp 00:00: [bus 00-ff] [ 1.727691] pnp 00:00: [io 0x0cf8-0x0cff] [ 1.727693] pnp 00:00: [io 0x0000-0x0cf7 window] [ 1.727695] pnp 00:00: [io 0x0d00-0xffff window] [ 1.727696] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 1.727698] pnp 00:00: [mem 0xc0010000-0xffffffff window] [ 1.727756] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 1.727770] pnp 00:01: [mem 0xfed13000-0xfed19fff] [ 1.727825] system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved [ 1.727828] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.727872] pnp 00:02: [dma 4] [ 1.727874] pnp 00:02: [io 0x0000-0x000f] [ 1.727875] pnp 00:02: [io 0x0081-0x0083] [ 1.727877] pnp 00:02: [io 0x0087] [ 1.727878] pnp 00:02: [io 0x0089-0x008b] [ 1.727879] pnp 00:02: [io 0x008f] [ 1.727881] pnp 00:02: [io 0x00c0-0x00df] [ 1.727904] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.727913] pnp 00:03: [io 0x0070-0x0071] [ 1.727926] pnp 00:03: [irq 8] [ 1.727954] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.727961] pnp 00:04: [io 0x0061] [ 1.727984] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 1.727991] pnp 00:05: [io 0x00f0-0x00ff] [ 1.727995] pnp 00:05: [irq 13] [ 1.728024] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 1.728252] pnp 00:06: [irq 6] [ 1.728255] pnp 00:06: [dma 2] [ 1.728256] pnp 00:06: [io 0x03f0-0x03f5] [ 1.728258] pnp 00:06: [io 0x03f7] [ 1.728311] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active) [ 1.728337] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled] [ 1.728339] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled] [ 1.728341] pnp 00:07: [io 0x0290-0x0297] [ 1.728389] system 00:07: [io 0x0290-0x0297] has been reserved [ 1.728392] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.728471] pnp 00:08: [io 0x0010-0x001f] [ 1.728472] pnp 00:08: [io 0x0022-0x003f] [ 1.728474] pnp 00:08: [io 0x0044-0x005f] [ 1.728475] pnp 00:08: [io 0x0062-0x0063] [ 1.728477] pnp 00:08: [io 0x0065-0x006f] [ 1.728478] pnp 00:08: [io 0x0072-0x007f] [ 1.728479] pnp 00:08: [io 0x0080] [ 1.728481] pnp 00:08: [io 0x0084-0x0086] [ 1.728482] pnp 00:08: [io 0x0088] [ 1.728483] pnp 00:08: [io 0x008c-0x008e] [ 1.728485] pnp 00:08: [io 0x0090-0x009f] [ 1.728486] pnp 00:08: [io 0x00a2-0x00bf] [ 1.728488] pnp 00:08: [io 0x00e0-0x00ef] [ 1.728489] pnp 00:08: [io 0x04d0-0x04d1] [ 1.728490] pnp 00:08: [io 0x0800-0x087f] [ 1.728492] pnp 00:08: [io 0x0400-0x041f] [ 1.728493] pnp 00:08: [io 0x0480-0x04bf] [ 1.728495] pnp 00:08: [mem 0xfed1c000-0xfed1ffff] [ 1.728496] pnp 00:08: [mem 0xfed20000-0xfed3ffff] [ 1.728498] pnp 00:08: [mem 0xfed50000-0xfed8ffff] [ 1.728499] pnp 00:08: [mem 0xffb00000-0xffbfffff] [ 1.728500] pnp 00:08: [mem 0xfff00000-0xffffffff] [ 1.728556] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 1.728558] system 00:08: [io 0x0800-0x087f] has been reserved [ 1.728560] system 00:08: [io 0x0400-0x041f] has been reserved [ 1.728562] system 00:08: [io 0x0480-0x04bf] has been reserved [ 1.728564] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.728566] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.728568] system 00:08: [mem 0xfed50000-0xfed8ffff] has been reserved [ 1.728570] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved [ 1.728572] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved [ 1.728575] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.728648] pnp 00:09: [mem 0xfed00000-0xfed003ff] [ 1.728678] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active) [ 1.728756] pnp 00:0a: [mem 0xfec00000-0xfec00fff] [ 1.728758] pnp 00:0a: [mem 0xfee00000-0xfee00fff] [ 1.728797] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.728799] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.728802] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.729001] pnp 00:0b: [irq 4] [ 1.729003] pnp 00:0b: [dma 0 disabled] [ 1.729005] pnp 00:0b: [io 0x03f8-0x03ff] [ 1.729064] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.729090] pnp 00:0c: [mem 0xf0000000-0xf3ffffff] [ 1.729130] system 00:0c: [mem 0xf0000000-0xf3ffffff] has been reserved [ 1.729133] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.729237] pnp 00:0d: [mem 0x00000000-0x0009ffff] [ 1.729238] pnp 00:0d: [mem 0x000c0000-0x000dffff] [ 1.729240] pnp 00:0d: [mem 0x000e0000-0x000fffff] [ 1.729241] pnp 00:0d: [mem 0x00100000-0xbfffffff] [ 1.729243] pnp 00:0d: [mem 0x00000000-0xffffffffffffffff disabled] [ 1.729289] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved [ 1.729291] system 00:0d: [mem 0x000c0000-0x000dffff] has been reserved [ 1.729293] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved [ 1.729295] system 00:0d: [mem 0x00100000-0xbfffffff] could not be reserved [ 1.729298] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.729404] pnp: PnP ACPI: found 14 devices [ 1.729405] ACPI: ACPI bus type pnp unregistered [ 1.729804] Switched to NOHz mode on CPU #0 [ 1.729895] Switched to NOHz mode on CPU #1 [ 1.735469] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0100000-0xc04fffff] [ 1.735475] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 1.735478] pci 0000:00:01.0: PCI bridge to [bus 04-04] [ 1.735480] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 1.735483] pci 0000:00:01.0: bridge window [mem 0xe9e00000-0xefefffff] [ 1.735486] pci 0000:00:01.0: bridge window [mem 0xc1800000-0xe17fffff 64bit pref] [ 1.735489] pci 0000:00:1c.0: PCI bridge to [bus 03-03] [ 1.735492] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 1.735496] pci 0000:00:1c.0: bridge window [mem 0xc0100000-0xc04fffff] [ 1.735500] pci 0000:00:1c.0: bridge window [mem 0xc1700000-0xc17fffff 64bit pref] [ 1.735506] pci 0000:00:1c.3: PCI bridge to [bus 02-02] [ 1.735508] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff] [ 1.735513] pci 0000:00:1c.3: bridge window [mem 0xe9d00000-0xe9dfffff] [ 1.735516] pci 0000:00:1c.3: bridge window [mem pref disabled] [ 1.735522] pci 0000:00:1e.0: PCI bridge to [bus 01-01] [ 1.735524] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff] [ 1.735528] pci 0000:00:1e.0: bridge window [mem 0xe1900000-0xe9cfffff] [ 1.735531] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 1.735560] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.735564] pci 0000:00:01.0: setting latency timer to 64 [ 1.735570] pci 0000:00:1c.0: enabling device (0106 -> 0107) [ 1.735574] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.735577] pci 0000:00:1c.0: setting latency timer to 64 [ 1.735585] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.735588] pci 0000:00:1c.3: setting latency timer to 64 [ 1.735594] pci 0000:00:1e.0: setting latency timer to 64 [ 1.735597] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.735599] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.735600] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.735602] pci_bus 0000:00: resource 7 [mem 0xc0010000-0xffffffff] [ 1.735604] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] [ 1.735606] pci_bus 0000:04: resource 1 [mem 0xe9e00000-0xefefffff] [ 1.735607] pci_bus 0000:04: resource 2 [mem 0xc1800000-0xe17fffff 64bit pref] [ 1.735609] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] [ 1.735611] pci_bus 0000:03: resource 1 [mem 0xc0100000-0xc04fffff] [ 1.735613] pci_bus 0000:03: resource 2 [mem 0xc1700000-0xc17fffff 64bit pref] [ 1.735614] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff] [ 1.735616] pci_bus 0000:02: resource 1 [mem 0xe9d00000-0xe9dfffff] [ 1.735618] pci_bus 0000:01: resource 0 [io 0xa000-0xafff] [ 1.735619] pci_bus 0000:01: resource 1 [mem 0xe1900000-0xe9cfffff] [ 1.735621] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 1.735623] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 1.735624] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 1.735626] pci_bus 0000:01: resource 7 [mem 0xc0010000-0xffffffff] [ 1.735678] NET: Registered protocol family 2 [ 1.735916] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 1.737557] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.743082] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.743756] TCP: Hash tables configured (established 524288 bind 65536) [ 1.743759] TCP reno registered [ 1.743779] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.743896] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.744120] NET: Registered protocol family 1 [ 1.770056] pci 0000:04:00.0: Boot video device [ 1.770064] PCI: CLS 16 bytes, default 64 [ 1.770067] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.770068] Placing 64MB software IO TLB between ffff8800bbc00000 - ffff8800bfc00000 [ 1.770070] software IO TLB at phys 0xbbc00000 - 0xbfc00000 [ 1.770346] audit: initializing netlink socket (disabled) [ 1.770355] type=2000 audit(1304456445.770:1): initialized [ 1.780245] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.781593] VFS: Disk quotas dquot_6.5.2 [ 1.781635] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.782100] fuse init (API version 7.16) [ 1.782162] msgmni has been set to 15975 [ 1.782321] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.782339] io scheduler noop registered [ 1.782340] io scheduler deadline registered [ 1.782368] io scheduler cfq registered (default) [ 1.782445] pcieport 0000:00:01.0: setting latency timer to 64 [ 1.782470] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 1.782505] pcieport 0000:00:1c.0: setting latency timer to 64 [ 1.782537] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 1.782585] pcieport 0000:00:1c.3: setting latency timer to 64 [ 1.782615] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X [ 1.782679] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.782696] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.782734] intel_idle: MWAIT substates: 0x20 [ 1.782735] intel_idle: does not run on family 6 model 15 [ 1.782815] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.782819] ACPI: Power Button [PWRB] [ 1.782855] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.782858] ACPI: Power Button [PWRF] [ 1.782970] ACPI: acpi_idle registered with cpuidle [ 2.432999] ERST: Table is not found! [ 2.433089] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.453594] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.453631] Freeing initrd memory: 13568k freed [ 2.601964] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.602233] Linux agpgart interface v0.103 [ 2.603150] brd: module loaded [ 2.603572] loop: module loaded [ 2.603645] i2c-core: driver [adp5520] using legacy suspend method [ 2.603646] i2c-core: driver [adp5520] using legacy resume method [ 2.603728] ata_piix 0000:00:1f.1: version 2.13 [ 2.603748] ata_piix 0000:00:1f.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2.603776] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 2.604038] scsi0 : ata_piix [ 2.604108] scsi1 : ata_piix [ 2.604142] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 2.604144] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 2.604415] Fixed MDIO Bus: probed [ 2.604436] PPP generic driver version 2.4.2 [ 2.604466] tun: Universal TUN/TAP device driver, 1.6 [ 2.604468] tun: (C) 1999-2004 Max Krasnyansky [ 2.604530] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.604544] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.604560] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.604563] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.604595] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 2.604631] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 2.604640] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.608527] ehci_hcd 0000:00:1d.7: cache line size of 16 is not supported [ 2.608540] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xeffffc00 [ 2.630028] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.630167] hub 1-0:1.0: USB hub found [ 2.630172] hub 1-0:1.0: 8 ports detected [ 2.630249] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.630257] uhci_hcd: USB Universal Host Controller Interface driver [ 2.630294] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.630299] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.630301] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.630327] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.630361] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000e480 [ 2.630450] hub 2-0:1.0: USB hub found [ 2.630454] hub 2-0:1.0: 2 ports detected [ 2.630505] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.630509] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.630512] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.630543] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.630585] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e800 [ 2.630678] hub 3-0:1.0: USB hub found [ 2.630681] hub 3-0:1.0: 2 ports detected [ 2.630731] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.630736] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.630738] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.630766] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.640066] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880 [ 2.640193] hub 4-0:1.0: USB hub found [ 2.640197] hub 4-0:1.0: 2 ports detected [ 2.640255] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 2.640260] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 2.640262] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 2.640296] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 2.640336] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000ec00 [ 2.640426] hub 5-0:1.0: USB hub found [ 2.640429] hub 5-0:1.0: 2 ports detected [ 2.640517] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 2.643264] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.643269] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.643357] mousedev: PS/2 mouse device common for all mice [ 2.643458] rtc_cmos 00:03: RTC can wake from S4 [ 2.650096] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 2.650117] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs [ 2.650226] device-mapper: uevent: version 1.0.3 [ 2.650290] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 2.650343] device-mapper: multipath: version 1.2.0 loaded [ 2.650345] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.650432] cpuidle: using governor ladder [ 2.650434] cpuidle: using governor menu [ 2.650611] TCP cubic registered [ 2.650700] NET: Registered protocol family 10 [ 2.651062] NET: Registered protocol family 17 [ 2.651073] Registering the dns_resolver key type [ 2.651170] PM: Hibernation image not present or could not be loaded. [ 2.651180] registered taskstats version 1 [ 2.651350] Magic number: 11:407:44 [ 2.651422] rtc_cmos 00:03: setting system clock to 2011-05-03 21:00:47 UTC (1304456447) [ 2.651424] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.651425] EDD information not available. [ 2.771243] Refined TSC clocksource calibration: 3001.165 MHz. [ 2.771246] Switching to clocksource tsc [ 2.771253] ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H22L, 1.02, max UDMA/66 [ 2.810251] ata1.00: configured for UDMA/66 [ 2.812651] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H22L 1.02 PQ: 0 ANSI: 5 [ 2.815169] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.815172] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.815274] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 2.815332] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 2.816713] Freeing unused kernel memory: 956k freed [ 2.816934] Write protecting the kernel read-only data: 10240k [ 2.817500] Freeing unused kernel memory: 184k freed [ 2.821282] Freeing unused kernel memory: 1444k freed [ 2.837936] <30>udev[72]: starting version 167 [ 2.889829] ahci 0000:00:1f.2: version 3.0 [ 2.889851] ahci 0000:00:1f.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23 [ 2.889885] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X [ 2.889914] ahci 0000:00:1f.2: enabling ASUS P5W DH Deluxe on-board SIMG4726 workaround [ 2.889935] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode [ 2.889937] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part [ 2.889941] ahci 0000:00:1f.2: setting latency timer to 64 [ 2.894695] scsi2 : ahci [ 2.894944] scsi3 : ahci [ 2.896486] scsi4 : ahci [ 2.897194] scsi5 : ahci [ 2.897306] ata3: SATA max UDMA/133 abar m1024@0xeffff800 port 0xeffff900 irq 43 [ 2.897309] ata4: SATA max UDMA/133 abar m1024@0xeffff800 port 0xeffff980 irq 43 [ 2.897312] ata5: SATA max UDMA/133 abar m1024@0xeffff800 port 0xeffffa00 irq 43 [ 2.897314] ata6: SATA max UDMA/133 abar m1024@0xeffff800 port 0xeffffa80 irq 43 [ 2.922148] sky2: driver version 1.28 [ 2.922176] sky2 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2.922186] sky2 0000:02:00.0: setting latency timer to 64 [ 2.922208] sky2 0000:02:00.0: Yukon-2 EC chip revision 2 [ 2.922290] sky2 0000:02:00.0: irq 44 for MSI/MSI-X [ 2.924755] Floppy drive(s): fd0 is 1.44M [ 2.925618] sky2 0000:02:00.0: eth0: addr 00:18:f3:53:50:bb [ 2.943644] FDC 0 is a post-1991 82077 [ 2.960035] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 3.111617] hub 1-1:1.0: USB hub found [ 3.111969] hub 1-1:1.0: 4 ports detected [ 3.240033] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.240052] ata5: SATA link down (SStatus 0 SControl 300) [ 3.240074] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.241339] ata3.00: ATA-8: ST3500320AS, SD15, max UDMA/133 [ 3.241342] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.241434] ata6.00: ATA-8: ST3500320AS, SD15, max UDMA/133 [ 3.241437] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.243051] ata3.00: configured for UDMA/133 [ 3.243157] scsi 2:0:0:0: Direct-Access ATA ST3500320AS SD15 PQ: 0 ANSI: 5 [ 3.243201] ata6.00: configured for UDMA/133 [ 3.243316] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 3.243382] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 3.243443] sd 2:0:0:0: [sda] Write Protect is off [ 3.243445] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.243470] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.267205] sda: sda1 sda2 sda3 sda4 < > [ 3.267208] sda: partition table partially beyond EOD, enabling native capacity [ 3.268068] sda: sda1 sda2 sda3 sda4 < > [ 3.268070] sda: partition table partially beyond EOD, truncated [ 3.268137] sda: p3 size 628832295 extends beyond EOD, truncated [ 3.268170] sda: p4 start 1419889021 is beyond EOD, truncated [ 3.268334] sd 2:0:0:0: [sda] Attached SCSI disk [ 3.530027] usb 1-6: new high speed USB device using ehci_hcd and address 6 [ 3.692264] usbcore: registered new interface driver uas [ 3.760031] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.760074] ata4.00: unsupported device, disabling [ 3.760077] ata4.00: disabled [ 3.760202] scsi 5:0:0:0: Direct-Access ATA ST3500320AS SD15 PQ: 0 ANSI: 5 [ 3.760328] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 3.760386] sd 5:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 3.760443] sd 5:0:0:0: [sdb] Write Protect is off [ 3.760445] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.760468] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.779864] sdb: unknown partition table [ 3.780062] sd 5:0:0:0: [sdb] Attached SCSI disk [ 3.784593] Initializing USB Mass Storage driver... [ 3.798410] [drm] Initialized drm 1.1.0 20060810 [ 3.800022] usb 1-7: new high speed USB device using ehci_hcd and address 7 [ 3.800946] scsi6 : usb-storage 1-6:1.0 [ 3.801182] usbcore: registered new interface driver usb-storage [ 3.801184] USB Mass Storage support registered. [ 3.822382] nouveau 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.822387] nouveau 0000:04:00.0: setting latency timer to 64 [ 3.825208] [drm] nouveau 0000:04:00.0: Detected an NV50 generation card (0x0a0100a2) [ 3.829394] [drm] nouveau 0000:04:00.0: Attempting to load BIOS image from PRAMIN [ 3.894550] [drm] nouveau 0000:04:00.0: ... appears to be valid [ 3.894553] [drm] nouveau 0000:04:00.0: BIT BIOS found [ 3.894556] [drm] nouveau 0000:04:00.0: Bios version 62.00.1a.00 [ 3.894558] [drm] nouveau 0000:04:00.0: TMDS table version 2.0 [ 3.894560] [drm] nouveau 0000:04:00.0: Found Display Configuration Block version 4.0 [ 3.894563] [drm] nouveau 0000:04:00.0: Raw DCB entry 0: 04000320 00000028 [ 3.894565] [drm] nouveau 0000:04:00.0: Raw DCB entry 1: 01000322 00020030 [ 3.894566] [drm] nouveau 0000:04:00.0: Raw DCB entry 2: 02011310 00000028 [ 3.894568] [drm] nouveau 0000:04:00.0: Raw DCB entry 3: 02011312 00020030 [ 3.894569] [drm] nouveau 0000:04:00.0: Raw DCB entry 4: 010223f1 00c1c023 [ 3.894572] [drm] nouveau 0000:04:00.0: DCB connector table: VHER 0x40 5 16 4 [ 3.894574] [drm] nouveau 0000:04:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07 [ 3.894576] [drm] nouveau 0000:04:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08 [ 3.894578] [drm] nouveau 0000:04:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff [ 3.894580] [drm] nouveau 0000:04:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff [ 3.894582] [drm] nouveau 0000:04:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff [ 3.894583] [drm] nouveau 0000:04:00.0: 5: 0x00000360: type 0x60 idx 5 tag 0xff [ 3.894587] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 0 at offset 0xCB1C [ 3.950426] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 1 at offset 0xCDC3 [ 3.951881] hub 1-7:1.0: USB hub found [ 3.952218] hub 1-7:1.0: 4 ports detected [ 3.990238] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 2 at offset 0xE227 [ 3.990248] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 3 at offset 0xE328 [ 4.010140] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 4 at offset 0xE3D6 [ 4.010143] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table at offset 0xE43B [ 4.040062] [drm] nouveau 0000:04:00.0: 0xE43B: Condition still not met after 20ms, skipping following opcodes [ 4.061964] [drm] nouveau 0000:04:00.0: 3 available performance level(s) [ 4.061968] [drm] nouveau 0000:04:00.0: 0: memory 100MHz core 300MHz shader 600MHz voltage 1110mV fanspeed 100% [ 4.061971] [drm] nouveau 0000:04:00.0: 2: memory 300MHz core 400MHz shader 800MHz voltage 1120mV fanspeed 100% [ 4.061974] [drm] nouveau 0000:04:00.0: 3: memory 1150MHz core 666MHz shader 1404MHz voltage 1120mV fanspeed 100% [ 4.061992] [drm] nouveau 0000:04:00.0: c: memory 297MHz core 399MHz shader 810MHz voltage 1150mV [ 4.062067] [TTM] Zone kernel: Available graphics memory: 4097738 kiB. [ 4.062069] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [ 4.062071] [TTM] Initializing pool allocator. [ 4.062084] [drm] nouveau 0000:04:00.0: Detected 896MiB VRAM [ 4.062097] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 4.072498] [drm] nouveau 0000:04:00.0: 512 MiB GART (aperture) [ 4.090741] [drm] nouveau 0000:04:00.0: DCB encoder 1 unknown [ 4.090743] [drm] nouveau 0000:04:00.0: TV-1 has no encoders, removing [ 4.091215] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 4.091217] [drm] No driver support for vblank timestamp query. [ 4.230045] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 4.308992] [drm] nouveau 0000:04:00.0: allocated 1680x1050 fb: 0x60000000, bo ffff88022dfec800 [ 4.311910] Console: switching to colour frame buffer device 210x65 [ 4.314097] fb0: nouveaufb frame buffer device [ 4.314098] drm: registered panic notifier [ 4.314103] [drm] Initialized nouveau 0.0.16 20090420 for 0000:04:00.0 on minor 0 [ 4.700114] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 4.801492] scsi 6:0:0:0: Direct-Access Patriot Memory PMAP PQ: 0 ANSI: 0 CCS [ 4.801907] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 4.802733] sd 6:0:0:0: [sdc] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 4.803228] sd 6:0:0:0: [sdc] Write Protect is off [ 4.803231] sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 4.803976] sd 6:0:0:0: [sdc] No Caching mode page present [ 4.803979] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 4.806601] sd 6:0:0:0: [sdc] No Caching mode page present [ 4.806604] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 4.807115] sdc: sdc1 [ 4.809224] sd 6:0:0:0: [sdc] No Caching mode page present [ 4.809226] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 4.809229] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 4.882641] hub 3-1:1.0: USB hub found [ 4.884612] hub 3-1:1.0: 4 ports detected [ 4.963927] Btrfs loaded [ 4.967991] xor: automatically using best checksumming function: generic_sse [ 5.010005] generic_sse: 11010.800 MB/sec [ 5.010007] xor: using function: generic_sse (11010.800 MB/sec) [ 5.011805] device-mapper: dm-raid45: initialized v0.2594b [ 5.170029] usb 3-2: new low speed USB device using uhci_hcd and address 3 [ 5.376883] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input2 [ 5.376974] generic-usb 0003:046D:C01D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2/input0 [ 5.376985] usbcore: registered new interface driver usbhid [ 5.376987] usbhid: USB HID core driver [ 5.430349] usb 1-1.1: new high speed USB device using ehci_hcd and address 8 [ 5.770223] usb 1-1.2: new full speed USB device using ehci_hcd and address 9 [ 5.890030] input: Plantronics Plantronics Headset as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.2/1-1.2:1.3/input/input3 [ 5.890169] generic-usb 0003:047F:0CA1.0002: input,hidraw1: USB HID v1.00 Device [Plantronics Plantronics Headset] on usb-0000:00:1d.7-1.2/input3 [ 5.970225] usb 1-1.4: new high speed USB device using ehci_hcd and address 10 [ 6.081744] hub 1-1.4:1.0: USB hub found [ 6.082095] hub 1-1.4:1.0: 4 ports detected [ 6.160357] usb 1-7.3: new high speed USB device using ehci_hcd and address 11 [ 6.361616] usb 3-1.1: new low speed USB device using uhci_hcd and address 4 [ 6.550134] input: Logitech Logitech Gaming Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.1/3-1.1:1.0/input/input4 [ 6.550224] generic-usb 0003:046D:C221.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech Logitech Gaming Keyboard] on usb-0000:00:1d.1-1.1/input0 [ 6.581679] input: Logitech Logitech Gaming Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.1/3-1.1:1.1/input/input5 [ 6.581820] generic-usb 0003:046D:C221.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [Logitech Logitech Gaming Keyboard] on usb-0000:00:1d.1-1.1/input1 [ 6.661616] usb 3-1.4: new full speed USB device using uhci_hcd and address 5 [ 6.818717] input: G15 Keyboard G15 Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.4/3-1.4:1.0/input/input6 [ 6.818827] generic-usb 0003:046D:C222.0005: input,hiddev0,hidraw4: USB HID v1.11 Keypad [G15 Keyboard G15 Keyboard] on usb-0000:00:1d.1-1.4/input0 [ 8.134917] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 15.294448] aufs 2.1-standalone.tree-38-rcN-20110207 [ 15.304731] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 22.378754] <30>udev[1487]: starting version 167 [ 22.710121] EDAC MC: Ver: 2.1.0 Apr 11 2011 [ 22.711130] intel_rng: FWH not detected [ 22.716074] EDAC i82975x: ECC disabled on both channels. [ 22.750139] leds_ss4200: no LED devices found [ 22.964419] Linux video capture interface: v2.00 [ 22.995633] uvcvideo: Found UVC 1.00 device (046d:08c9) [ 23.013910] input: UVC Camera (046d:08c9) as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.1/1-1.1:1.0/input/input7 [ 23.014658] usbcore: registered new interface driver uvcvideo [ 23.014660] USB Video Class driver (v1.0.0) [ 23.054153] cfg80211: Calling CRDA to update world regulatory domain [ 23.080785] sky2 0000:02:00.0: eth0: enabling interface [ 23.081479] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.425412] cfg80211: World regulatory domain updated: [ 23.425415] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 23.425418] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 23.425420] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 23.425422] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 23.425424] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 23.425425] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 23.650097] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 23.650100] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.650102] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 23.650104] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.650105] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 23.650107] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.650109] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 23.650111] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.650112] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 23.650114] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.650116] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 23.650118] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.650119] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 23.650121] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.650123] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 23.650125] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.650126] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 23.650128] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.650130] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 23.650132] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.650133] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 23.650135] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.650137] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 23.650139] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.650140] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 23.650142] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.650144] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 23.650146] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm) [ 23.668211] SB-XFi 0000:01:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 24.116466] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 24.119474] ieee80211 phy0: hwaddr 00:15:af:06:97:fa, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 24.164833] rtl8187: Customer ID is 0x00 [ 24.170116] Registered led device: rtl8187-phy0::radio [ 24.171833] Registered led device: rtl8187-phy0::tx [ 24.172384] Registered led device: rtl8187-phy0::rx [ 24.175091] rtl8187: wireless switch is on [ 24.175683] usbcore: registered new interface driver rtl8187 [ 24.213780] usbcore: registered new interface driver snd-usb-audio [ 25.424122] sky2 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both [ 27.291549] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 27.296842] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 27.401890] lp: driver loaded but no devices found [ 27.410497] ppdev: user-space parallel port driver [ 29.282489] cannot submit datapipe for urb 0, error -28: not enough bandwidth [ 50.190034] end_request: I/O error, dev fd0, sector 0 [ 50.210034] end_request: I/O error, dev fd0, sector 0 [ 56.287669] JFS: nTxBlock = 8192, nTxLock = 65536 [ 56.356424] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 56.358572] SGI XFS Quota Management subsystem [ 56.450028] end_request: I/O error, dev fd0, sector 0 [ 56.470032] end_request: I/O error, dev fd0, sector 0 [ 58.681763] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)