[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-8-generic (buildd@vernadsky) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable) [ 0.000000] BIOS-e820: 000000001ffd0000 - 000000001ffde000 (ACPI data) [ 0.000000] BIOS-e820: 000000001ffde000 - 0000000020000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel! [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: FUJITSU SIEMENS MS-7275/MS-7275, BIOS 080013 06/30/2006 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x1ffd0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] init_memory_mapping: 0000000000000000-000000001ffd0000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 001fc00000 page 2M [ 0.000000] 001fc00000 - 001ffd0000 page 4k [ 0.000000] kernel direct mapping tables up to 1ffd0000 @ 1bfb000-1c00000 [ 0.000000] RAMDISK: 1e1e3000 - 1ee1d000 [ 0.000000] ACPI: RSDP 000f83c0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 1ffd0000 00034 (v01 A M I OEMRSDT 06000630 MSFT 00000097) [ 0.000000] ACPI: FACP 1ffd0200 00084 (v02 A M I OEMFACP 06000630 MSFT 00000097) [ 0.000000] ACPI: DSDT 1ffd0440 04012 (v01 1ADCF 1ADCF007 00000007 INTL 02002026) [ 0.000000] ACPI: FACS 1ffde000 00040 [ 0.000000] ACPI: APIC 1ffd0390 0006C (v01 A M I OEMAPIC 06000630 MSFT 00000097) [ 0.000000] ACPI: MCFG 1ffd0400 0003C (v01 A M I OEMMCFG 06000630 MSFT 00000097) [ 0.000000] ACPI: OEMB 1ffde040 0005B (v01 A M I AMI_OEM 06000630 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1ffd0000 [ 0.000000] low ram: 0 - 1ffd0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001ffd0 [ 0.000000] HighMem empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001ffd0 [ 0.000000] On node 0 totalpages: 130911 [ 0.000000] free_area_init_node: node 0, pgdat c1784100, node_mem_map dfbcf200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 992 pages used for memmap [ 0.000000] Normal zone: 125936 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] SB4X0 revision 0x83 [ 0.000000] Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dee00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @df400000 s28800 r0 d24448 u1048576 [ 0.000000] pcpu-alloc: s28800 r0 d24448 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129887 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=ca2a48a4-031a-4fe7-828d-fee2bc7f3567 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 2620160 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 494476k/524096k available (5188k kernel code, 29168k reserved, 2540k data, 700k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xe07d0000 - 0xff7fe000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdffd0000 ( 511 MB) [ 0.000000] .init : 0xc178d000 - 0xc183c000 ( 700 kB) [ 0.000000] .data : 0xc15112a1 - 0xc178c480 (2540 kB) [ 0.000000] .text : 0xc1000000 - 0xc15112a1 (5188 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=df008000 soft=df00a000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3058.725 MHz processor. [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6117.45 BogoMIPS (lpj=12234900) [ 0.004010] pid_max: default: 32768 minimum: 301 [ 0.004043] Security Framework initialized [ 0.004065] AppArmor: AppArmor initialized [ 0.004068] Yama: becoming mindful. [ 0.004148] Mount-cache hash table entries: 512 [ 0.004337] Initializing cgroup subsys ns [ 0.004342] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.004346] Initializing cgroup subsys cpuacct [ 0.004353] Initializing cgroup subsys memory [ 0.004366] Initializing cgroup subsys devices [ 0.004369] Initializing cgroup subsys freezer [ 0.004372] Initializing cgroup subsys net_cls [ 0.004375] Initializing cgroup subsys blkio [ 0.004429] CPU: Physical Processor ID: 0 [ 0.008006] CPU: Processor Core ID: 0 [ 0.008011] mce: CPU supports 4 MCE banks [ 0.008026] CPU0: Thermal monitoring enabled (TM2) [ 0.008031] using mwait in idle threads. [ 0.011628] ACPI: Core revision 20110112 [ 0.015924] ftrace: allocating 23640 entries in 47 pages [ 0.020100] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.020448] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.062050] CPU0: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 09 [ 0.064003] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.064003] ... version: 0 [ 0.064003] ... bit width: 40 [ 0.064003] ... generic registers: 18 [ 0.064003] ... value mask: 000000ffffffffff [ 0.064003] ... max period: 0000007fffffffff [ 0.064003] ... fixed-purpose events: 0 [ 0.064003] ... event mask: 000000000003ffff [ 0.064003] CPU 1 irqstacks, hard=df0b2000 soft=df0b4000 [ 0.064003] Booting Node 0, Processors #1 [ 0.008000] Initializing CPU#1 [ 0.152036] Brought up 2 CPUs [ 0.152042] Total of 2 processors activated (12235.74 BogoMIPS). [ 0.152537] devtmpfs: initialized [ 0.153864] print_constraints: dummy: [ 0.153901] Time: 2:06:55 Date: 05/01/11 [ 0.153956] NET: Registered protocol family 16 [ 0.153974] Trying to unpack rootfs image as initramfs... [ 0.154200] EISA bus registered [ 0.154217] ACPI: bus type pci registered [ 0.154369] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.154376] PCI: not using MMCONFIG [ 0.154521] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2 [ 0.154525] PCI: Using configuration type 1 for base access [ 0.158711] bio: create slab at 0 [ 0.161024] ACPI: EC: Look up EC in DSDT [ 0.163238] ACPI: Executed 1 blocks of module-level executable AML code [ 0.168366] ACPI Error: Method parse/execution failed [\_PR_.CPU1._PDC] (Node df021180), AE_INVALID_TABLE_LENGTH (20110112/psparse-536) [ 0.168531] ACPI Error: Method parse/execution failed [\_PR_.CPU2._PDC] (Node df021240), AE_INVALID_TABLE_LENGTH (20110112/psparse-536) [ 0.168845] ACPI: Interpreter enabled [ 0.168857] ACPI: (supports S0 S3 S4 S5) [ 0.168901] ACPI: Using IOAPIC for interrupt routing [ 0.169050] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.170188] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.170194] PCI: Using MMCONFIG for extended config space [ 0.208315] ACPI: No dock devices found. [ 0.208324] HEST: Table not found. [ 0.208332] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.208561] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.208934] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.208940] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.208946] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.208952] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) [ 0.208958] pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xffffffff] (ignored) [ 0.208979] pci 0000:00:00.0: [1002:5a33] type 0 class 0x000600 [ 0.209017] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit] [ 0.209063] pci 0000:00:02.0: [1002:5a34] type 1 class 0x000604 [ 0.209137] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.209145] pci 0000:00:02.0: PME# disabled [ 0.209224] pci 0000:00:11.0: [1002:437a] type 0 class 0x000101 [ 0.209269] pci 0000:00:11.0: reg 10: [io 0xa400-0xa407] [ 0.209289] pci 0000:00:11.0: reg 14: [io 0xa000-0xa003] [ 0.209308] pci 0000:00:11.0: reg 18: [io 0x9c00-0x9c07] [ 0.209327] pci 0000:00:11.0: reg 1c: [io 0x9800-0x9803] [ 0.209346] pci 0000:00:11.0: reg 20: [io 0x9400-0x940f] [ 0.209366] pci 0000:00:11.0: reg 24: [mem 0xff6ff800-0xff6ff9ff] [ 0.209385] pci 0000:00:11.0: reg 30: [mem 0xff580000-0xff5fffff pref] [ 0.209432] pci 0000:00:11.0: supports D1 D2 [ 0.209473] pci 0000:00:12.0: [1002:4379] type 0 class 0x000101 [ 0.209510] pci 0000:00:12.0: reg 10: [io 0xb800-0xb807] [ 0.209529] pci 0000:00:12.0: reg 14: [io 0xb400-0xb403] [ 0.209548] pci 0000:00:12.0: reg 18: [io 0xb000-0xb007] [ 0.209567] pci 0000:00:12.0: reg 1c: [io 0xac00-0xac03] [ 0.209587] pci 0000:00:12.0: reg 20: [io 0xa800-0xa80f] [ 0.209606] pci 0000:00:12.0: reg 24: [mem 0xff6ffc00-0xff6ffdff] [ 0.209625] pci 0000:00:12.0: reg 30: [mem 0xff600000-0xff67ffff pref] [ 0.209671] pci 0000:00:12.0: supports D1 D2 [ 0.209709] pci 0000:00:13.0: [1002:4374] type 0 class 0x000c03 [ 0.209743] pci 0000:00:13.0: reg 10: [mem 0xff6fe000-0xff6fefff] [ 0.209904] pci 0000:00:13.1: [1002:4375] type 0 class 0x000c03 [ 0.209938] pci 0000:00:13.1: reg 10: [mem 0xff6fd000-0xff6fdfff] [ 0.210091] pci 0000:00:13.2: [1002:4373] type 0 class 0x000c03 [ 0.210130] pci 0000:00:13.2: reg 10: [mem 0xff6fc000-0xff6fcfff] [ 0.210259] pci 0000:00:13.2: supports D1 D2 [ 0.210264] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.210272] pci 0000:00:13.2: PME# disabled [ 0.210315] pci 0000:00:14.0: [1002:4372] type 0 class 0x000c05 [ 0.210339] pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f] [ 0.210358] pci 0000:00:14.0: reg 14: [mem 0xfed00000-0xfed003ff] [ 0.210448] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.210484] pci 0000:00:14.1: [1002:4376] type 0 class 0x000101 [ 0.210517] pci 0000:00:14.1: reg 10: [io 0x01f0-0x01f7] [ 0.210536] pci 0000:00:14.1: reg 14: [io 0x03f4-0x03f7] [ 0.210555] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.210574] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.210593] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f] [ 0.210691] pci 0000:00:14.2: [1002:437b] type 0 class 0x000403 [ 0.210737] pci 0000:00:14.2: reg 10: [mem 0xff6f8000-0xff6fbfff 64bit] [ 0.210860] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.210870] pci 0000:00:14.2: PME# disabled [ 0.210902] pci 0000:00:14.3: [1002:4377] type 0 class 0x000601 [ 0.211038] pci 0000:00:14.4: [1002:4371] type 1 class 0x000604 [ 0.211212] pci 0000:01:00.0: [1002:554b] type 0 class 0x000300 [ 0.211241] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.211263] pci 0000:01:00.0: reg 18: [mem 0xff2f0000-0xff2fffff 64bit] [ 0.211279] pci 0000:01:00.0: reg 20: [io 0x5800-0x58ff] [ 0.211305] pci 0000:01:00.0: reg 30: [mem 0xff2c0000-0xff2dffff pref] [ 0.211340] pci 0000:01:00.0: supports D1 D2 [ 0.211385] pci 0000:01:00.1: [1002:556b] type 0 class 0x000380 [ 0.211411] pci 0000:01:00.1: reg 10: [mem 0xff2e0000-0xff2effff 64bit] [ 0.211516] pci 0000:01:00.1: supports D1 D2 [ 0.211543] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.211563] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.211574] pci 0000:00:02.0: bridge window [io 0x5000-0x5fff] [ 0.211582] pci 0000:00:02.0: bridge window [mem 0xff200000-0xff2fffff] [ 0.211592] pci 0000:00:02.0: bridge window [mem 0xbff00000-0xdfefffff 64bit pref] [ 0.211639] pci 0000:02:00.0: [14f1:2f20] type 0 class 0x000780 [ 0.211678] pci 0000:02:00.0: reg 10: [mem 0xff3f0000-0xff3fffff] [ 0.211700] pci 0000:02:00.0: reg 14: [io 0x6c00-0x6c07] [ 0.211823] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.211833] pci 0000:02:00.0: PME# disabled [ 0.211876] pci 0000:02:03.0: [10ec:8139] type 0 class 0x000200 [ 0.211915] pci 0000:02:03.0: reg 10: [io 0x6800-0x68ff] [ 0.211937] pci 0000:02:03.0: reg 14: [mem 0xff3efc00-0xff3efcff] [ 0.212059] pci 0000:02:03.0: reg 30: [mem 0xff3d0000-0xff3dffff pref] [ 0.212106] pci 0000:02:03.0: supports D1 D2 [ 0.212111] pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold [ 0.212120] pci 0000:02:03.0: PME# disabled [ 0.212159] pci 0000:02:04.0: [1106:3044] type 0 class 0x000c00 [ 0.212199] pci 0000:02:04.0: reg 10: [mem 0xff3ef000-0xff3ef7ff] [ 0.212222] pci 0000:02:04.0: reg 14: [io 0x6400-0x647f] [ 0.212351] pci 0000:02:04.0: supports D2 [ 0.212356] pci 0000:02:04.0: PME# supported from D2 D3hot D3cold [ 0.212366] pci 0000:02:04.0: PME# disabled [ 0.212452] pci 0000:00:14.4: PCI bridge to [bus 02-02] (subtractive decode) [ 0.212467] pci 0000:00:14.4: bridge window [io 0x6000-0x6fff] [ 0.212477] pci 0000:00:14.4: bridge window [mem 0xff300000-0xff3fffff] [ 0.212487] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.212493] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.212498] pci 0000:00:14.4: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.212520] pci_bus 0000:00: on NUMA node 0 [ 0.212529] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.212746] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 0.212951] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.213067] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.223773] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.223890] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.224027] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.224145] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.224266] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.224393] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled. [ 0.224494] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.224604] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.224829] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.224841] vgaarb: loaded [ 0.225339] SCSI subsystem initialized [ 0.225491] libata version 3.00 loaded. [ 0.225599] usbcore: registered new interface driver usbfs [ 0.225627] usbcore: registered new interface driver hub [ 0.225689] usbcore: registered new device driver usb [ 0.225959] wmi: Mapper loaded [ 0.225963] PCI: Using ACPI for IRQ routing [ 0.225971] PCI: pci_cache_line_size set to 64 bytes [ 0.225989] pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] conflicts with PCI Bus 0000:01 [mem 0xff200000-0xff2fffff] [ 0.226125] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.226130] reserve RAM buffer: 000000001ffd0000 - 000000001fffffff [ 0.226371] NetLabel: Initializing [ 0.226376] NetLabel: domain hash size = 128 [ 0.226379] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.226402] NetLabel: unlabeled traffic allowed by default [ 0.244488] AppArmor: AppArmor Filesystem Enabled [ 0.244550] pnp: PnP ACPI init [ 0.244593] ACPI: bus type pnp registered [ 0.244838] pnp 00:00: [bus 00-ff] [ 0.244845] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.244850] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.244855] pnp 00:00: [io 0x0d00-0xffff window] [ 0.244861] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.244866] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.244871] pnp 00:00: [mem 0x20000000-0xffffffff window] [ 0.244997] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.245069] pnp 00:01: [dma 4] [ 0.245074] pnp 00:01: [io 0x0000-0x000f] [ 0.245084] pnp 00:01: [io 0x0081-0x0083] [ 0.245088] pnp 00:01: [io 0x0087] [ 0.245093] pnp 00:01: [io 0x0089-0x008b] [ 0.245097] pnp 00:01: [io 0x008f] [ 0.245101] pnp 00:01: [io 0x00c0-0x00df] [ 0.245171] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.245197] pnp 00:02: [io 0x0070-0x0071] [ 0.245219] pnp 00:02: [irq 8] [ 0.245286] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.245311] pnp 00:03: [io 0x0061] [ 0.245382] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.245404] pnp 00:04: [io 0x00f0-0x00ff] [ 0.245415] pnp 00:04: [irq 13] [ 0.245483] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.246085] pnp 00:05: [io 0x03f8-0x03ff] [ 0.246096] pnp 00:05: [irq 4] [ 0.246101] pnp 00:05: [dma 0 disabled] [ 0.246261] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.246716] pnp 00:06: [io 0x0010-0x001f] [ 0.246722] pnp 00:06: [io 0x0022-0x003f] [ 0.246727] pnp 00:06: [io 0x0060] [ 0.246731] pnp 00:06: [io 0x0064] [ 0.246735] pnp 00:06: [io 0x0062-0x0063] [ 0.246740] pnp 00:06: [io 0x0065-0x006f] [ 0.246744] pnp 00:06: [io 0x0072-0x007f] [ 0.246748] pnp 00:06: [io 0x0080] [ 0.246752] pnp 00:06: [io 0x0084-0x0086] [ 0.246757] pnp 00:06: [io 0x0088] [ 0.246761] pnp 00:06: [io 0x008c-0x008e] [ 0.246765] pnp 00:06: [io 0x0090-0x009f] [ 0.246769] pnp 00:06: [io 0x00a2-0x00bf] [ 0.246774] pnp 00:06: [io 0x00b1] [ 0.246778] pnp 00:06: [io 0x00e0-0x00ef] [ 0.246782] pnp 00:06: [io 0x04d0-0x04d1] [ 0.246787] pnp 00:06: [io 0x040b] [ 0.246791] pnp 00:06: [io 0x04d6] [ 0.246795] pnp 00:06: [io 0x0c00-0x0c01] [ 0.246799] pnp 00:06: [io 0x0c14] [ 0.246804] pnp 00:06: [io 0x0c50-0x0c51] [ 0.246808] pnp 00:06: [io 0x0c52] [ 0.246812] pnp 00:06: [io 0x0c6c] [ 0.246816] pnp 00:06: [io 0x0c6f] [ 0.246820] pnp 00:06: [io 0x0cd4-0x0cd5] [ 0.246824] pnp 00:06: [io 0x0cd6-0x0cd7] [ 0.246829] pnp 00:06: [io 0x0cd8-0x0cdf] [ 0.246833] pnp 00:06: [io 0x0800-0x089f] [ 0.246838] pnp 00:06: [io 0x0000-0xffffffff disabled] [ 0.246843] pnp 00:06: [io 0x0900-0x090f] [ 0.246847] pnp 00:06: [io 0x0910-0x091f] [ 0.246852] pnp 00:06: [io 0xfe00-0xfefe] [ 0.246856] pnp 00:06: [mem 0xffb80000-0xffbfffff] [ 0.246861] pnp 00:06: [mem 0xfff80000-0xffffffff] [ 0.247071] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.247079] system 00:06: [io 0x040b] has been reserved [ 0.247084] system 00:06: [io 0x04d6] has been reserved [ 0.247090] system 00:06: [io 0x0c00-0x0c01] has been reserved [ 0.247096] system 00:06: [io 0x0c14] has been reserved [ 0.247101] system 00:06: [io 0x0c50-0x0c51] has been reserved [ 0.247107] system 00:06: [io 0x0c52] has been reserved [ 0.247112] system 00:06: [io 0x0c6c] has been reserved [ 0.247118] system 00:06: [io 0x0c6f] has been reserved [ 0.247124] system 00:06: [io 0x0cd4-0x0cd5] has been reserved [ 0.247129] system 00:06: [io 0x0cd6-0x0cd7] has been reserved [ 0.247135] system 00:06: [io 0x0cd8-0x0cdf] has been reserved [ 0.247141] system 00:06: [io 0x0800-0x089f] has been reserved [ 0.247147] system 00:06: [io 0x0900-0x090f] has been reserved [ 0.247153] system 00:06: [io 0x0910-0x091f] has been reserved [ 0.247159] system 00:06: [io 0xfe00-0xfefe] has been reserved [ 0.247166] system 00:06: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.247172] system 00:06: [mem 0xfff80000-0xffffffff] has been reserved [ 0.247180] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.247477] pnp 00:07: [io 0x0000-0xffffffff disabled] [ 0.247483] pnp 00:07: [io 0x0a00-0x0a0f] [ 0.247488] pnp 00:07: [io 0x0600-0x060f] [ 0.247607] system 00:07: [io 0x0a00-0x0a0f] has been reserved [ 0.247613] system 00:07: [io 0x0600-0x060f] has been reserved [ 0.247620] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.247745] pnp 00:08: [mem 0xfec00000-0xfec00fff] [ 0.247751] pnp 00:08: [mem 0xfee00000-0xfee00fff] [ 0.247855] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.247862] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.247869] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.247952] pnp 00:09: [mem 0xe0000000-0xefffffff] [ 0.248095] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 0.248103] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.248533] pnp 00:0a: [mem 0x00000000-0x0009ffff] [ 0.248544] pnp 00:0a: [mem 0x000c0000-0x000cffff] [ 0.248549] pnp 00:0a: [mem 0x000e0000-0x000fffff] [ 0.248554] pnp 00:0a: [mem 0x00100000-0x1fffffff] [ 0.248559] pnp 00:0a: [mem 0x00000000-0xffffffff disabled] [ 0.248572] pnp 00:0a: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.248580] pnp 00:0a: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.248588] pnp 00:0a: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.248596] pnp 00:0a: disabling [mem 0x00100000-0x1fffffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.248737] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.249002] pnp: PnP ACPI: found 11 devices [ 0.249008] ACPI: ACPI bus type pnp unregistered [ 0.249017] PnPBIOS: Disabled by ACPI PNP [ 0.288079] Switching to clocksource acpi_pm [ 0.288713] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.288721] pci 0000:00:02.0: bridge window [io 0x5000-0x5fff] [ 0.288730] pci 0000:00:02.0: bridge window [mem 0xff200000-0xff2fffff] [ 0.288738] pci 0000:00:02.0: bridge window [mem 0xbff00000-0xdfefffff 64bit pref] [ 0.288749] pci 0000:00:14.4: PCI bridge to [bus 02-02] [ 0.288756] pci 0000:00:14.4: bridge window [io 0x6000-0x6fff] [ 0.288767] pci 0000:00:14.4: bridge window [mem 0xff300000-0xff3fffff] [ 0.288776] pci 0000:00:14.4: bridge window [mem pref disabled] [ 0.288803] pci 0000:00:02.0: setting latency timer to 64 [ 0.288819] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.288825] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.288831] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] [ 0.288836] pci_bus 0000:01: resource 1 [mem 0xff200000-0xff2fffff] [ 0.288841] pci_bus 0000:01: resource 2 [mem 0xbff00000-0xdfefffff 64bit pref] [ 0.288847] pci_bus 0000:02: resource 0 [io 0x6000-0x6fff] [ 0.288852] pci_bus 0000:02: resource 1 [mem 0xff300000-0xff3fffff] [ 0.288857] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] [ 0.288862] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff] [ 0.288942] NET: Registered protocol family 2 [ 0.289095] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.289574] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.289688] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.289791] TCP: Hash tables configured (established 16384 bind 16384) [ 0.289796] TCP reno registered [ 0.289801] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.289815] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.289992] NET: Registered protocol family 1 [ 0.290012] pci 0000:00:00.0: MSI quirk detected; MSI disabled [ 0.332057] Switched to NOHz mode on CPU #0 [ 0.332062] Switched to NOHz mode on CPU #1 [ 0.356168] pci 0000:01:00.0: Boot video device [ 0.356196] PCI: CLS 64 bytes, default 64 [ 0.356583] cpufreq-nforce2: No nForce2 chipset. [ 0.356884] audit: initializing netlink socket (disabled) [ 0.356904] type=2000 audit(1304215615.352:1): initialized [ 0.371323] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.375686] VFS: Disk quotas dquot_6.5.2 [ 0.375847] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.377482] fuse init (API version 7.16) [ 0.377712] msgmni has been set to 965 [ 0.378255] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.378311] io scheduler noop registered [ 0.378316] io scheduler deadline registered [ 0.378352] io scheduler cfq registered (default) [ 0.378584] pcieport 0000:00:02.0: setting latency timer to 64 [ 0.378772] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.378839] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.379190] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.444072] ACPI: Power Button [PWRB] [ 0.444244] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.444256] ACPI: Power Button [PWRF] [ 0.444660] ACPI: acpi_idle registered with cpuidle [ 0.444704] ACPI: duty_cycle spans bit 4 [ 0.444803] ACPI: duty_cycle spans bit 4 [ 0.447778] ERST: Table is not found! [ 0.447960] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.468691] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.468999] isapnp: Scanning for PnP cards... [ 0.664274] Freeing initrd memory: 12520k freed [ 0.823816] isapnp: No Plug & Play device found [ 0.847751] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.848236] Linux agpgart interface v0.103 [ 0.850433] brd: module loaded [ 0.851424] loop: module loaded [ 0.851589] i2c-core: driver [adp5520] using legacy suspend method [ 0.851592] i2c-core: driver [adp5520] using legacy resume method [ 0.851835] pata_acpi 0000:00:11.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.851940] pata_acpi 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.852027] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.852055] pata_acpi 0000:00:14.1: setting latency timer to 64 [ 0.852643] Fixed MDIO Bus: probed [ 0.852704] PPP generic driver version 2.4.2 [ 0.852772] tun: Universal TUN/TAP device driver, 1.6 [ 0.852776] tun: (C) 1999-2004 Max Krasnyansky [ 0.852928] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.852958] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.852986] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 0.853048] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 [ 0.853199] ehci_hcd 0000:00:13.2: irq 19, io mem 0xff6fc000 [ 0.864035] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 0.864251] hub 1-0:1.0: USB hub found [ 0.864259] hub 1-0:1.0: 8 ports detected [ 0.864400] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.864422] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.864444] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 0.864509] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 0.864572] ohci_hcd 0000:00:13.0: irq 19, io mem 0xff6fe000 [ 0.924222] hub 2-0:1.0: USB hub found [ 0.924233] hub 2-0:1.0: 4 ports detected [ 0.924350] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.924366] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 0.924436] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 0.928060] ohci_hcd 0000:00:13.1: irq 19, io mem 0xff6fd000 [ 0.988188] hub 3-0:1.0: USB hub found [ 0.988199] hub 3-0:1.0: 4 ports detected [ 0.988320] uhci_hcd: USB Universal Host Controller Interface driver [ 0.988458] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.990973] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.990985] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.991199] mousedev: PS/2 mouse device common for all mice [ 0.991416] rtc_cmos 00:02: RTC can wake from S4 [ 1.000125] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.000158] rtc0: alarms up to one month, 114 bytes nvram [ 1.000287] device-mapper: uevent: version 1.0.3 [ 1.000420] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 1.000541] device-mapper: multipath: version 1.2.0 loaded [ 1.000548] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.000669] EISA: Probing bus 0 at eisa.0 [ 1.000700] Cannot allocate resource for EISA slot 5 [ 1.000703] Cannot allocate resource for EISA slot 6 [ 1.000715] EISA: Detected 0 cards. [ 1.000824] cpuidle: using governor ladder [ 1.000829] cpuidle: using governor menu [ 1.001282] TCP cubic registered [ 1.001499] NET: Registered protocol family 10 [ 1.002440] NET: Registered protocol family 17 [ 1.002468] Registering the dns_resolver key type [ 1.002534] Using IPI No-Shortcut mode [ 1.002704] PM: Hibernation image not present or could not be loaded. [ 1.002724] registered taskstats version 1 [ 1.003106] Magic number: 11:340:105 [ 1.003116] usbmon usbmon1: hash matches [ 1.003234] rtc_cmos 00:02: setting system clock to 2011-05-01 02:06:56 UTC (1304215616) [ 1.003238] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.003240] EDD information not available. [ 1.003373] Freeing unused kernel memory: 700k freed [ 1.004120] Write protecting the kernel text: 5192k [ 1.004188] Write protecting the kernel read-only data: 2148k [ 1.041237] <30>udev[64]: starting version 167 [ 1.229872] sata_sil 0000:00:11.0: version 2.4 [ 1.263336] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 1.263385] 8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 1.270129] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 1.270205] 8139too 0000:02:03.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.271832] scsi0 : sata_sil [ 1.272649] 8139too 0000:02:03.0: eth0: RealTek RTL8139 at 0x6800, 00:16:17:7c:f9:38, IRQ 23 [ 1.274863] scsi1 : sata_sil [ 1.275362] ata1: SATA max UDMA/100 mmio m512@0xff6ff800 tf 0xff6ff880 irq 23 [ 1.275372] ata2: SATA max UDMA/100 mmio m512@0xff6ff800 tf 0xff6ff8c0 irq 23 [ 1.288876] scsi2 : sata_sil [ 1.291474] scsi3 : sata_sil [ 1.291796] ata3: SATA max UDMA/100 mmio m512@0xff6ffc00 tf 0xff6ffc80 irq 22 [ 1.291802] ata4: SATA max UDMA/100 mmio m512@0xff6ffc00 tf 0xff6ffcc0 irq 22 [ 1.293225] scsi4 : pata_atiixp [ 1.293597] scsi5 : pata_atiixp [ 1.351644] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 1.351650] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 1.356047] Refined TSC clocksource calibration: 3058.999 MHz. [ 1.356053] Switching to clocksource tsc [ 1.400027] usb 1-4: new high speed USB device using ehci_hcd and address 5 [ 1.512785] ata5.00: ATA-6: ST320410A, 3.60, max UDMA/100 [ 1.512789] ata5.00: 39102336 sectors, multi 16: LBA [ 1.528726] ata5.00: configured for UDMA/100 [ 1.544781] usbcore: registered new interface driver uas [ 1.592035] ata1: SATA link down (SStatus 0 SControl 310) [ 1.612034] ata3: SATA link down (SStatus 0 SControl 310) [ 1.840036] usb 2-1: new low speed USB device using ohci_hcd and address 2 [ 1.912033] ata2: SATA link down (SStatus 0 SControl 310) [ 2.104185] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input2 [ 2.104404] generic-usb 0003:0603:00F2.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:13.0-1/input0 [ 2.114188] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.1/input/input3 [ 2.114574] generic-usb 0003:0603:00F2.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:13.0-1/input1 [ 2.114753] usbcore: registered new interface driver usbhid [ 2.114758] usbhid: USB HID core driver [ 2.232034] ata4: SATA link down (SStatus 0 SControl 310) [ 2.232302] scsi 4:0:0:0: Direct-Access ATA ST320410A 3.60 PQ: 0 ANSI: 5 [ 2.232591] sd 4:0:0:0: [sda] 39102336 512-byte logical blocks: (20.0 GB/18.6 GiB) [ 2.232688] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 2.232718] sd 4:0:0:0: [sda] Write Protect is off [ 2.232725] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.232785] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.275297] sda: sda1 sda2 < sda5 > [ 2.275894] sd 4:0:0:0: [sda] Attached SCSI disk [ 2.290319] firewire_ohci 0000:02:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.298845] Initializing USB Mass Storage driver... [ 2.303652] scsi6 : usb-storage 1-4:1.0 [ 2.304490] usbcore: registered new interface driver usb-storage [ 2.304498] USB Mass Storage support registered. [ 2.352038] usb 2-2: new full speed USB device using ohci_hcd and address 3 [ 2.352153] firewire_ohci: Added fw-ohci device 0000:02:04.0, OHCI v1.0, 4 IR + 8 IT contexts, quirks 0x11 [ 2.592168] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input4 [ 2.592499] generic-usb 0003:046D:C52B.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:13.0-2/input0 [ 2.598087] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.1/input/input5 [ 2.598581] generic-usb 0003:046D:C52B.0004: input,hiddev0,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.0-2/input1 [ 2.607271] generic-usb 0003:046D:C52B.0005: hiddev0,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-2/input2 [ 2.852321] firewire_core: created device fw0: GUID 00dc1000d65cfa00, S400 [ 2.908049] usb 3-1: new low speed USB device using ohci_hcd and address 2 [ 2.909712] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.240381] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 3.240386] ata5.00: BMDMA stat 0x24 [ 3.240392] ata5.00: failed command: READ DMA [ 3.240399] ata5.00: cmd c8/00:00:08:09:00/00:00:00:00:00/e1 tag 0 dma 131072 in [ 3.240400] res 51/84:00:08:09:00/00:00:00:00:00/e1 Emask 0x10 (ATA bus error) [ 3.240404] ata5.00: status: { DRDY ERR } [ 3.240407] ata5.00: error: { ICRC ABRT } [ 3.240442] ata5: soft resetting link [ 3.305370] scsi 6:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 0 CCS [ 3.306226] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 3.307840] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 3.420702] ata5.00: configured for UDMA/100 [ 3.420722] sd 4:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3.420727] sd 4:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 3.420734] Descriptor sense data with sense descriptors (in hex): [ 3.420738] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 3.420752] 01 00 09 08 [ 3.420759] sd 4:0:0:0: [sda] Add. Sense: Scsi parity error [ 3.420767] sd 4:0:0:0: [sda] CDB: Read(10): 28 00 01 00 09 08 00 01 00 00 [ 3.420781] end_request: I/O error, dev sda, sector 16779528 [ 3.420797] ata5: EH complete [ 3.682557] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 3.682560] ata5.00: BMDMA stat 0x24 [ 3.682564] ata5.00: failed command: READ DMA [ 3.682570] ata5.00: cmd c8/00:f8:10:09:00/00:00:00:00:00/e1 tag 0 dma 126976 in [ 3.682572] res 51/84:00:10:09:00/00:00:00:00:00/e1 Emask 0x10 (ATA bus error) [ 3.682575] ata5.00: status: { DRDY ERR } [ 3.682578] ata5.00: error: { ICRC ABRT } [ 3.682608] ata5: soft resetting link [ 3.860707] ata5.00: configured for UDMA/100 [ 3.860717] ata5: EH complete [ 4.153345] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 4.153348] ata5.00: BMDMA stat 0x24 [ 4.153351] ata5.00: failed command: READ DMA [ 4.153358] ata5.00: cmd c8/00:f8:10:09:00/00:00:00:00:00/e1 tag 0 dma 126976 in [ 4.153359] res 51/84:00:10:09:00/00:00:00:00:00/e1 Emask 0x10 (ATA bus error) [ 4.153362] ata5.00: status: { DRDY ERR } [ 4.153365] ata5.00: error: { ICRC ABRT } [ 4.153395] ata5: soft resetting link [ 4.332694] ata5.00: configured for UDMA/100 [ 4.332703] ata5: EH complete [ 5.052145] ata5.00: limiting speed to UDMA/66:PIO4 [ 5.052153] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 5.052156] ata5.00: BMDMA stat 0x24 [ 5.052162] ata5.00: failed command: READ DMA [ 5.052169] ata5.00: cmd c8/00:00:60:1d:c6/00:00:00:00:00/e1 tag 0 dma 131072 in [ 5.052171] res 51/84:00:60:1d:c6/00:00:00:00:00/e1 Emask 0x10 (ATA bus error) [ 5.052175] ata5.00: status: { DRDY ERR } [ 5.052178] ata5.00: error: { ICRC ABRT } [ 5.052213] ata5: soft resetting link [ 5.232704] ata5.00: configured for UDMA/66 [ 5.232716] ata5: EH complete [ 5.521029] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 5.521032] ata5.00: BMDMA stat 0x24 [ 5.521035] ata5.00: failed command: READ DMA [ 5.521042] ata5.00: cmd c8/00:00:60:1d:c6/00:00:00:00:00/e1 tag 0 dma 131072 in [ 5.521043] res 51/84:00:60:1d:c6/00:00:00:00:00/e1 Emask 0x10 (ATA bus error) [ 5.521047] ata5.00: status: { DRDY ERR } [ 5.521049] ata5.00: error: { ICRC ABRT } [ 5.521079] ata5: soft resetting link [ 5.700702] ata5.00: configured for UDMA/66 [ 5.700711] ata5: EH complete [ 5.992065] ata5.00: limiting speed to UDMA/33:PIO4 [ 5.992069] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 5.992072] ata5.00: BMDMA stat 0x24 [ 5.992075] ata5.00: failed command: READ DMA [ 5.992082] ata5.00: cmd c8/00:00:60:1d:c6/00:00:00:00:00/e1 tag 0 dma 131072 in [ 5.992083] res 51/84:00:60:1d:c6/00:00:00:00:00/e1 Emask 0x10 (ATA bus error) [ 5.992087] ata5.00: status: { DRDY ERR } [ 5.992089] ata5.00: error: { ICRC ABRT } [ 5.992119] ata5: soft resetting link [ 6.172699] ata5.00: configured for UDMA/33 [ 6.172708] ata5: EH complete [ 6.512809] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 6.512814] ata5.00: BMDMA stat 0x24 [ 6.512817] ata5.00: failed command: READ DMA [ 6.512824] ata5.00: cmd c8/00:00:f0:19:c6/00:00:00:00:00/e1 tag 0 dma 131072 in [ 6.512826] res 51/84:00:f0:19:c6/00:00:00:00:00/e1 Emask 0x10 (ATA bus error) [ 6.512830] ata5.00: status: { DRDY ERR } [ 6.512832] ata5.00: error: { ICRC ABRT } [ 6.512864] ata5: soft resetting link [ 6.692710] ata5.00: configured for UDMA/33 [ 6.692719] ata5: EH complete [ 9.665613] Adding 522236k swap on /dev/sda5. Priority:-1 extents:1 across:522236k [ 10.317690] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 10.317697] ata5.00: BMDMA stat 0x24 [ 10.317702] ata5.00: failed command: READ DMA [ 10.317710] ata5.00: cmd c8/00:90:88:20:8d/00:00:00:00:00/e0 tag 0 dma 73728 in [ 10.317712] res 51/84:00:88:20:8d/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 10.317716] ata5.00: status: { DRDY ERR } [ 10.317719] ata5.00: error: { ICRC ABRT } [ 10.317754] ata5: soft resetting link [ 10.496704] ata5.00: configured for UDMA/33 [ 10.496716] ata5: EH complete [ 11.024820] <30>udev[278]: starting version 167 [ 11.885075] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 14.011512] lp: driver loaded but no devices found [ 14.228503] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input6 [ 14.229612] microsoft 0003:045E:00F9.0006: input,hidraw5: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:13.1-1/input0 [ 14.247092] microsoft 0003:045E:00F9.0007: fixing up Microsoft Wireless Receiver Model 1028 report descriptor [ 14.263692] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.1/input/input7 [ 14.264987] microsoft 0003:045E:00F9.0007: input,hidraw6: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:13.1-1/input1 [ 14.468557] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SMOV [io 0xb00-0xb06] [ 14.468564] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.899277] [drm] Initialized drm 1.1.0 20060810 [ 15.933952] [drm] radeon defaulting to kernel modesetting. [ 15.933959] [drm] radeon kernel modesetting enabled. [ 15.934074] radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 15.934083] radeon 0000:01:00.0: setting latency timer to 64 [ 15.937029] [drm] initializing kernel modesetting (R423 0x1002:0x554B). [ 15.937118] [drm] register mmio base: 0xFF2F0000 [ 15.937123] [drm] register mmio size: 65536 [ 15.940068] ATOM BIOS: X800GT [ 15.940105] [drm] Generation 2 PCI interface, using max accessible memory [ 15.940114] radeon 0000:01:00.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used) [ 15.940118] radeon 0000:01:00.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF [ 15.940154] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 15.940158] [drm] Driver supports precise vblank timestamp query. [ 15.940205] [drm] radeon: irq initialized. [ 15.940723] [drm] Detected VRAM RAM=256M, BAR=256M [ 15.940729] [drm] RAM width 256bits DDR [ 15.940854] [TTM] Zone kernel: Available graphics memory: 253848 kiB. [ 15.940857] [TTM] Initializing pool allocator. [ 15.940892] [drm] radeon: 256M of VRAM memory ready [ 15.940895] [drm] radeon: 512M of GTT memory ready. [ 15.940926] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 15.943956] [drm] PCIE GART of 512M enabled (table at 0xC0040000). [ 15.943970] [drm] radeon: 2 quad pipes, 1 z pipes initialized. [ 15.944036] radeon 0000:01:00.0: WB enabled [ 15.944464] [drm] Loading R400 Microcode [ 16.018979] type=1400 audit(1304215631.511:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=486 comm="apparmor_parser" [ 16.019001] type=1400 audit(1304215631.511:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=549 comm="apparmor_parser" [ 16.020111] type=1400 audit(1304215631.515:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=486 comm="apparmor_parser" [ 16.020139] type=1400 audit(1304215631.515:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=549 comm="apparmor_parser" [ 16.020803] type=1400 audit(1304215631.515:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=486 comm="apparmor_parser" [ 16.020836] type=1400 audit(1304215631.515:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=549 comm="apparmor_parser" [ 16.632888] [drm] radeon: ring at 0x00000000A0001000 [ 16.632916] [drm] ring test succeeded in 0 usecs [ 16.633211] [drm] radeon: ib pool ready. [ 16.633353] [drm] ib test succeeded in 0 usecs [ 16.634116] [drm] Radeon Display Connectors [ 16.634121] [drm] Connector 0: [ 16.634124] [drm] DVI-I [ 16.634128] [drm] HPD2 [ 16.634133] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 16.634137] [drm] Encoders: [ 16.634141] [drm] CRT1: INTERNAL_DAC1 [ 16.634144] [drm] DFP2: INTERNAL_DVO1 [ 16.634148] [drm] Connector 1: [ 16.634151] [drm] S-video [ 16.634154] [drm] Encoders: [ 16.634157] [drm] TV1: INTERNAL_DAC2 [ 16.634162] [drm] Connector 2: [ 16.634165] [drm] DVI-I [ 16.634168] [drm] HPD1 [ 16.634173] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68 [ 16.634176] [drm] Encoders: [ 16.634180] [drm] CRT2: INTERNAL_DAC2 [ 16.634183] [drm] DFP1: INTERNAL_TMDS1 [ 16.780531] [drm] fb mappable at 0xC00C0000 [ 16.780537] [drm] vram apper at 0xC0000000 [ 16.780539] [drm] size 5242880 [ 16.780542] [drm] fb depth is 24 [ 16.780544] [drm] pitch is 5120 [ 16.781071] Console: switching to colour frame buffer device 160x64 [ 16.781141] fb0: radeondrmfb frame buffer device [ 16.781146] drm: registered panic notifier [ 16.781166] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:00.0 on minor 0 [ 17.948227] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 19.240068] hda_codec: ALC880: BIOS auto-probing. [ 24.720838] ppdev: user-space parallel port driver [ 26.271411] type=1400 audit(1304215641.763:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=726 comm="apparmor_parser" [ 26.272590] type=1400 audit(1304215641.767:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=726 comm="apparmor_parser" [ 28.269174] type=1400 audit(1304215643.763:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=741 comm="apparmor_parser" [ 28.270150] type=1400 audit(1304215643.763:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=741 comm="apparmor_parser" [ 28.270762] type=1400 audit(1304215643.763:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=741 comm="apparmor_parser" [ 29.043774] type=1400 audit(1304215644.535:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=742 comm="apparmor_parser" [ 29.056744] type=1400 audit(1304215644.551:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=742 comm="apparmor_parser" [ 29.064570] type=1400 audit(1304215644.559:15): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=742 comm="apparmor_parser" [ 29.077161] type=1400 audit(1304215644.571:16): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=812 comm="apparmor_parser" [ 29.078313] type=1400 audit(1304215644.571:17): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=812 comm="apparmor_parser" [ 30.232385] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 33.446839] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 33.446846] ata5.00: BMDMA stat 0x24 [ 33.446851] ata5.00: failed command: READ DMA [ 33.446859] ata5.00: cmd c8/00:00:60:60:c5/00:00:00:00:00/e0 tag 0 dma 131072 in [ 33.446861] res 51/84:00:60:60:c5/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 33.446865] ata5.00: status: { DRDY ERR } [ 33.446868] ata5.00: error: { ICRC ABRT } [ 33.446902] ata5: soft resetting link [ 33.624691] ata5.00: configured for UDMA/33 [ 33.624705] ata5: EH complete [ 41.144023] eth0: no IPv6 routers present [ 42.544974] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 53.876677] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 92.200620] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 92.200627] ata5.00: BMDMA stat 0x24 [ 92.200632] ata5.00: failed command: READ DMA [ 92.200639] ata5.00: cmd c8/00:00:f0:24:10/00:00:00:00:00/e0 tag 0 dma 131072 in [ 92.200641] res 51/84:00:f0:24:10/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 92.200645] ata5.00: status: { DRDY ERR } [ 92.200649] ata5.00: error: { ICRC ABRT } [ 92.200684] ata5: soft resetting link [ 92.380695] ata5.00: configured for UDMA/33 [ 92.380712] ata5: EH complete [ 94.024104] ata5.00: limiting speed to PIO4 [ 94.024118] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 94.024126] ata5.00: BMDMA stat 0x24 [ 94.024136] ata5.00: failed command: READ DMA [ 94.024147] ata5.00: cmd c8/00:00:f0:30:10/00:00:00:00:00/e0 tag 0 dma 131072 in [ 94.024150] res 51/84:00:f0:30:10/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 94.024156] ata5.00: status: { DRDY ERR } [ 94.024160] ata5.00: error: { ICRC ABRT } [ 94.024216] ata5: soft resetting link [ 94.204732] ata5.00: configured for PIO4 [ 94.204766] ata5: EH complete