[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-25-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #44-Ubuntu SMP Fri Sep 17 20:26:08 UTC 2010 (Ubuntu 2.6.32-25.44-generic 2.6.32.21+drm33.7) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable) [ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bdaa1000 (usable) [ 0.000000] BIOS-e820: 00000000bdaa1000 - 00000000bdaa7000 (reserved) [ 0.000000] BIOS-e820: 00000000bdaa7000 - 00000000bdbbb000 (usable) [ 0.000000] BIOS-e820: 00000000bdbbb000 - 00000000bdc0f000 (reserved) [ 0.000000] BIOS-e820: 00000000bdc0f000 - 00000000bdd08000 (usable) [ 0.000000] BIOS-e820: 00000000bdd08000 - 00000000bdf0f000 (reserved) [ 0.000000] BIOS-e820: 00000000bdf0f000 - 00000000bdf19000 (usable) [ 0.000000] BIOS-e820: 00000000bdf19000 - 00000000bdf1f000 (reserved) [ 0.000000] BIOS-e820: 00000000bdf1f000 - 00000000bdf63000 (usable) [ 0.000000] BIOS-e820: 00000000bdf63000 - 00000000bdf9f000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bdf9f000 - 00000000bdfe3000 (usable) [ 0.000000] BIOS-e820: 00000000bdfe3000 - 00000000bdfff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bdfff000 - 00000000be000000 (usable) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0xbe000 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D7FFF write-protect [ 0.000000] D8000-DBFFF uncachable [ 0.000000] DC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 100000000 mask FC0000000 write-back [ 0.000000] 3 base 0FFE00000 mask FFFE00000 write-protect [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009c400 (usable) [ 0.000000] modified: 000000000009c400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bdaa1000 (usable) [ 0.000000] modified: 00000000bdaa1000 - 00000000bdaa7000 (reserved) [ 0.000000] modified: 00000000bdaa7000 - 00000000bdbbb000 (usable) [ 0.000000] modified: 00000000bdbbb000 - 00000000bdc0f000 (reserved) [ 0.000000] modified: 00000000bdc0f000 - 00000000bdd08000 (usable) [ 0.000000] modified: 00000000bdd08000 - 00000000bdf0f000 (reserved) [ 0.000000] modified: 00000000bdf0f000 - 00000000bdf19000 (usable) [ 0.000000] modified: 00000000bdf19000 - 00000000bdf1f000 (reserved) [ 0.000000] modified: 00000000bdf1f000 - 00000000bdf63000 (usable) [ 0.000000] modified: 00000000bdf63000 - 00000000bdf9f000 (ACPI NVS) [ 0.000000] modified: 00000000bdf9f000 - 00000000bdfe3000 (usable) [ 0.000000] modified: 00000000bdfe3000 - 00000000bdfff000 (ACPI data) [ 0.000000] modified: 00000000bdfff000 - 00000000be000000 (usable) [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 37855000 - 37fefb31 [ 0.000000] Allocated new RAMDISK: 008e1000 - 0107bb31 [ 0.000000] Move RAMDISK from 0000000037855000 - 0000000037fefb30 to 008e1000 - 0107bb30 [ 0.000000] ACPI: RSDP 000f7860 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT bdff7ab9 00074 (v01 DELL QA09 06040000 LTP 00000000) [ 0.000000] ACPI: FACP bdfe7000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT bdfe8000 07059 (v02 Intel CANTIGA 06040000 INTL 20050624) [ 0.000000] ACPI: FACS bdf9efc0 00040 [ 0.000000] ACPI: HPET bdffed16 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG bdffed4e 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: APIC bdffed8a 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT bdffedf2 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC bdffee1a 00176 (v01 DELL QA09 06040000 LTP 00000000) [ 0.000000] ACPI: OSFR bdffef90 00070 (v01 DELL DELL 06040000 ASL 00000061) [ 0.000000] ACPI: SSDT bdfe6000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT bdfe5000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT bdfe4000 0020F (v01 PmRef ApTst 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2152MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008dced8] TEXT DATA BSS ==> [0000100000 - 00008dced8] [ 0.000000] #4 [000009c400 - 0000100000] BIOS reserved ==> [000009c400 - 0000100000] [ 0.000000] #5 [00008dd000 - 00008e0170] BRK ==> [00008dd000 - 00008e0170] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008e1000 - 000107bb31] NEW RAMDISK ==> [00008e1000 - 000107bb31] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00f7910] f7910 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000be000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[9] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009c [ 0.000000] 0: 0x00000100 -> 0x000bdaa1 [ 0.000000] 0: 0x000bdaa7 -> 0x000bdbbb [ 0.000000] 0: 0x000bdc0f -> 0x000bdd08 [ 0.000000] 0: 0x000bdf0f -> 0x000bdf19 [ 0.000000] 0: 0x000bdf1f -> 0x000bdf63 [ 0.000000] 0: 0x000bdf9f -> 0x000bdfe3 [ 0.000000] 0: 0x000bdfff -> 0x000be000 [ 0.000000] On node 0 totalpages: 777433 [ 0.000000] free_area_init_node: node 0, pgdat c079a760, node_mem_map c107d000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3960 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4305 pages used for memmap [ 0.000000] HighMem zone: 545906 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at be000000 (gap: be000000:42000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36056 r0 d21288 u2097152 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 771352 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-generic root=UUID=7f36c052-eb7e-4ceb-aca5-236f9e925021 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 15564800 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000be000) [ 0.000000] Memory: 3052292k/3112960k available (4680k kernel code, 56380k reserved, 2122k data, 656k init, 2200844k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a5000 - 0xc0849000 ( 656 kB) [ 0.000000] .data : 0xc05922c7 - 0xc07a4e68 (2122 kB) [ 0.000000] .text : 0xc0100000 - 0xc05922c7 (4680 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1994.851 MHz processor. [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.70 BogoMIPS (lpj=7979404) [ 0.004020] Security Framework initialized [ 0.004038] AppArmor: AppArmor initialized [ 0.004045] Mount-cache hash table entries: 512 [ 0.004158] Initializing cgroup subsys ns [ 0.004163] Initializing cgroup subsys cpuacct [ 0.004167] Initializing cgroup subsys memory [ 0.004174] Initializing cgroup subsys devices [ 0.004176] Initializing cgroup subsys freezer [ 0.004178] Initializing cgroup subsys net_cls [ 0.004197] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004200] CPU: L2 cache: 3072K [ 0.004203] CPU: Physical Processor ID: 0 [ 0.004204] CPU: Processor Core ID: 0 [ 0.004208] mce: CPU supports 6 MCE banks [ 0.004216] CPU0: Thermal monitoring enabled (TM2) [ 0.004220] using mwait in idle threads. [ 0.004226] Performance Events: Core2 events, Intel PMU driver. [ 0.004234] ... version: 2 [ 0.004235] ... bit width: 40 [ 0.004237] ... generic registers: 2 [ 0.004239] ... value mask: 000000ffffffffff [ 0.004241] ... max period: 000000007fffffff [ 0.004243] ... fixed-purpose events: 3 [ 0.004245] ... event mask: 0000000700000003 [ 0.004249] Checking 'hlt' instruction... OK. [ 0.022880] ACPI: Core revision 20090903 [ 0.036009] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.036013] ftrace: allocating 21789 entries in 43 pages [ 0.040047] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.044234] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.083922] CPU0: Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz stepping 06 [ 0.084001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 3072K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.008000] CPU1: Thermal monitoring enabled (TM2) [ 0.168073] CPU1: Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz stepping 06 [ 0.168084] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.172019] Brought up 2 CPUs [ 0.172021] Total of 2 processors activated (7979.69 BogoMIPS). [ 0.172663] CPU0 attaching sched-domain: [ 0.172666] domain 0: span 0-1 level MC [ 0.172668] groups: 0 1 [ 0.172675] CPU1 attaching sched-domain: [ 0.172677] domain 0: span 0-1 level MC [ 0.172679] groups: 1 0 [ 0.172768] devtmpfs: initialized [ 0.172768] regulator: core version 0.5 [ 0.172768] Time: 21:17:29 Date: 10/13/10 [ 0.172768] NET: Registered protocol family 16 [ 0.172768] Trying to unpack rootfs image as initramfs... [ 0.172768] EISA bus registered [ 0.172768] ACPI: bus type pci registered [ 0.172768] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.172768] PCI: Not using MMCONFIG. [ 0.172768] PCI: PCI BIOS revision 3.00 entry at 0xfde12, last bus=9 [ 0.172768] PCI: Using configuration type 1 for base access [ 0.176095] bio: create slab at 0 [ 0.177333] ACPI: EC: Look up EC in DSDT [ 0.181165] ACPI: BIOS _OSI(Linux) query ignored [ 0.183313] ACPI: Interpreter enabled [ 0.183317] ACPI: (supports S0 S3 S4 S5) [ 0.183340] ACPI: Using IOAPIC for interrupt routing [ 0.183390] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.184567] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.184569] PCI: Using MMCONFIG for extended config space [ 0.192404] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.192804] ACPI: No dock devices found. [ 0.193274] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.193386] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.193389] pci 0000:00:01.0: PME# disabled [ 0.193481] pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f] [ 0.193571] pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f] [ 0.193662] pci 0000:00:1a.2: reg 20 io port: [0x1840-0x185f] [ 0.193753] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc404800-0xfc404bff] [ 0.193819] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.193824] pci 0000:00:1a.7: PME# disabled [ 0.193873] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc400000-0xfc403fff] [ 0.193928] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.193932] pci 0000:00:1b.0: PME# disabled [ 0.194009] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.194014] pci 0000:00:1c.0: PME# disabled [ 0.194098] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.194102] pci 0000:00:1c.1: PME# disabled [ 0.194188] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.194192] pci 0000:00:1c.3: PME# disabled [ 0.194275] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.194280] pci 0000:00:1c.5: PME# disabled [ 0.194352] pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f] [ 0.194442] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f] [ 0.194528] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf] [ 0.194615] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc404c00-0xfc404fff] [ 0.194680] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.194685] pci 0000:00:1d.7: PME# disabled [ 0.194890] pci 0000:00:1f.2: reg 10 io port: [0x18f0-0x18f7] [ 0.194897] pci 0000:00:1f.2: reg 14 io port: [0x18e4-0x18e7] [ 0.194904] pci 0000:00:1f.2: reg 18 io port: [0x18e8-0x18ef] [ 0.194911] pci 0000:00:1f.2: reg 1c io port: [0x18e0-0x18e3] [ 0.194918] pci 0000:00:1f.2: reg 20 io port: [0x18c0-0x18df] [ 0.194925] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc404000-0xfc4047ff] [ 0.194966] pci 0000:00:1f.2: PME# supported from D3hot [ 0.194971] pci 0000:00:1f.2: PME# disabled [ 0.195006] pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff] [ 0.195023] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f] [ 0.195075] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.195082] pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff] [ 0.195089] pci 0000:01:00.0: reg 18 32bit mmio: [0xcfef0000-0xcfefffff] [ 0.195106] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.195127] pci 0000:01:00.0: supports D1 D2 [ 0.195160] pci 0000:01:00.1: reg 10 32bit mmio: [0xcfeec000-0xcfeeffff] [ 0.195203] pci 0000:01:00.1: supports D1 D2 [ 0.195262] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff] [ 0.195266] pci 0000:00:01.0: bridge 32bit mmio: [0xcfe00000-0xcfefffff] [ 0.195271] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.195323] pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff] [ 0.195328] pci 0000:00:1c.0: bridge 32bit mmio: [0xf6000000-0xf7ffffff] [ 0.195335] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff] [ 0.195443] pci 0000:04:00.0: reg 10 64bit mmio: [0xf8000000-0xf8001fff] [ 0.195573] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.195584] pci 0000:04:00.0: PME# disabled [ 0.195660] pci 0000:00:1c.1: bridge io port: [0x4000-0x4fff] [ 0.195665] pci 0000:00:1c.1: bridge 32bit mmio: [0xf8000000-0xf9ffffff] [ 0.195672] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf2000000-0xf3ffffff] [ 0.195726] pci 0000:00:1c.3: bridge io port: [0x5000-0x5fff] [ 0.195730] pci 0000:00:1c.3: bridge 32bit mmio: [0xfa000000-0xfbffffff] [ 0.195738] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf4000000-0xf5ffffff] [ 0.196076] pci 0000:08:00.0: reg 10 64bit mmio: [0xfc000000-0xfc00ffff] [ 0.196175] pci 0000:08:00.0: PME# supported from D3hot D3cold [ 0.196181] pci 0000:08:00.0: PME# disabled [ 0.196254] pci 0000:00:1c.5: bridge 32bit mmio: [0xfc000000-0xfc0fffff] [ 0.196301] pci 0000:09:01.0: reg 10 32bit mmio: [0xfc100000-0xfc1007ff] [ 0.196356] pci 0000:09:01.0: supports D1 D2 [ 0.196359] pci 0000:09:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.196364] pci 0000:09:01.0: PME# disabled [ 0.196403] pci 0000:09:01.1: reg 10 32bit mmio: [0xfc100800-0xfc1008ff] [ 0.196457] pci 0000:09:01.1: supports D1 D2 [ 0.196459] pci 0000:09:01.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.196464] pci 0000:09:01.1: PME# disabled [ 0.196502] pci 0000:09:01.2: reg 10 32bit mmio: [0xfc100c00-0xfc100cff] [ 0.196557] pci 0000:09:01.2: supports D1 D2 [ 0.196559] pci 0000:09:01.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.196564] pci 0000:09:01.2: PME# disabled [ 0.196602] pci 0000:09:01.3: reg 10 32bit mmio: [0xfc101000-0xfc1010ff] [ 0.196657] pci 0000:09:01.3: supports D1 D2 [ 0.196659] pci 0000:09:01.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.196664] pci 0000:09:01.3: PME# disabled [ 0.196725] pci 0000:00:1e.0: transparent bridge [ 0.196733] pci 0000:00:1e.0: bridge 32bit mmio: [0xfc100000-0xfc1fffff] [ 0.196766] pci_bus 0000:00: on NUMA node 0 [ 0.196771] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.196913] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.196984] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.197086] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.197163] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.197237] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.197299] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 0.210487] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 0.210597] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.210705] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.210812] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.210918] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.211026] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.211132] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.211239] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15) [ 0.211356] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.211363] vgaarb: loaded [ 0.211478] SCSI subsystem initialized [ 0.211560] libata version 3.00 loaded. [ 0.211634] usbcore: registered new interface driver usbfs [ 0.211646] usbcore: registered new interface driver hub [ 0.211674] usbcore: registered new device driver usb [ 0.211838] ACPI: WMI: Mapper loaded [ 0.211841] PCI: Using ACPI for IRQ routing [ 0.212397] NetLabel: Initializing [ 0.212398] NetLabel: domain hash size = 128 [ 0.212400] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.212413] NetLabel: unlabeled traffic allowed by default [ 0.212444] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.212449] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.216124] Switching to clocksource tsc [ 0.218061] AppArmor: AppArmor Filesystem Enabled [ 0.218072] pnp: PnP ACPI init [ 0.218084] ACPI: bus type pnp registered [ 0.220506] pnp: PnP ACPI: found 10 devices [ 0.220509] ACPI: ACPI bus type pnp unregistered [ 0.220512] PnPBIOS: Disabled by ACPI PNP [ 0.220525] system 00:02: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.220532] system 00:04: ioport range 0x400-0x47f has been reserved [ 0.220535] system 00:04: ioport range 0x680-0x69f has been reserved [ 0.220538] system 00:04: ioport range 0x480-0x48f has been reserved [ 0.220541] system 00:04: ioport range 0xffff-0xffff has been reserved [ 0.220544] system 00:04: ioport range 0xffff-0xffff has been reserved [ 0.220547] system 00:04: ioport range 0x1000-0x107f has been reserved [ 0.220549] system 00:04: ioport range 0x1180-0x11ff has been reserved [ 0.220552] system 00:04: ioport range 0x164e-0x164f has been reserved [ 0.220555] system 00:04: ioport range 0xfe00-0xfe00 has been reserved [ 0.220558] system 00:04: ioport range 0x900-0x97f has been reserved [ 0.220566] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.220569] system 00:09: iomem range 0xfed10000-0xfed13fff has been reserved [ 0.220572] system 00:09: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.220575] system 00:09: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.220577] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved [ 0.220580] system 00:09: iomem range 0xfeb00000-0xfeb03fff has been reserved [ 0.220583] system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.220586] system 00:09: iomem range 0xfed40000-0xfed44fff has been reserved [ 0.220589] system 00:09: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.255344] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.255348] pci 0000:00:01.0: IO window: 0x2000-0x2fff [ 0.255353] pci 0000:00:01.0: MEM window: 0xcfe00000-0xcfefffff [ 0.255356] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.255361] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.255365] pci 0000:00:1c.0: IO window: 0x3000-0x3fff [ 0.255371] pci 0000:00:1c.0: MEM window: 0xf6000000-0xf7ffffff [ 0.255375] pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff [ 0.255383] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04 [ 0.255386] pci 0000:00:1c.1: IO window: 0x4000-0x4fff [ 0.255392] pci 0000:00:1c.1: MEM window: 0xf8000000-0xf9ffffff [ 0.255397] pci 0000:00:1c.1: PREFETCH window: 0x000000f2000000-0x000000f3ffffff [ 0.255404] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06 [ 0.255407] pci 0000:00:1c.3: IO window: 0x5000-0x5fff [ 0.255414] pci 0000:00:1c.3: MEM window: 0xfa000000-0xfbffffff [ 0.255419] pci 0000:00:1c.3: PREFETCH window: 0x000000f4000000-0x000000f5ffffff [ 0.255426] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08 [ 0.255429] pci 0000:00:1c.5: IO window: 0x6000-0x6fff [ 0.255436] pci 0000:00:1c.5: MEM window: 0xfc000000-0xfc0fffff [ 0.255440] pci 0000:00:1c.5: PREFETCH window: 0x000000c0000000-0x000000c01fffff [ 0.255448] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09 [ 0.255450] pci 0000:00:1e.0: IO window: disabled [ 0.255455] pci 0000:00:1e.0: MEM window: 0xfc100000-0xfc1fffff [ 0.255459] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.255477] alloc irq_desc for 16 on node -1 [ 0.255479] alloc kstat_irqs on node -1 [ 0.255487] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.255491] pci 0000:00:01.0: setting latency timer to 64 [ 0.255501] alloc irq_desc for 17 on node -1 [ 0.255503] alloc kstat_irqs on node -1 [ 0.255506] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.255511] pci 0000:00:1c.0: setting latency timer to 64 [ 0.255520] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.255525] pci 0000:00:1c.1: setting latency timer to 64 [ 0.255534] alloc irq_desc for 19 on node -1 [ 0.255536] alloc kstat_irqs on node -1 [ 0.255539] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.255544] pci 0000:00:1c.3: setting latency timer to 64 [ 0.255553] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.255558] pci 0000:00:1c.5: setting latency timer to 64 [ 0.255566] pci 0000:00:1e.0: setting latency timer to 64 [ 0.255571] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.255574] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.255577] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff] [ 0.255579] pci_bus 0000:01: resource 1 mem: [0xcfe00000-0xcfefffff] [ 0.255582] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.255585] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff] [ 0.255587] pci_bus 0000:02: resource 1 mem: [0xf6000000-0xf7ffffff] [ 0.255590] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf1ffffff] [ 0.255593] pci_bus 0000:04: resource 0 io: [0x4000-0x4fff] [ 0.255596] pci_bus 0000:04: resource 1 mem: [0xf8000000-0xf9ffffff] [ 0.255598] pci_bus 0000:04: resource 2 pref mem [0xf2000000-0xf3ffffff] [ 0.255601] pci_bus 0000:06: resource 0 io: [0x5000-0x5fff] [ 0.255603] pci_bus 0000:06: resource 1 mem: [0xfa000000-0xfbffffff] [ 0.255606] pci_bus 0000:06: resource 2 pref mem [0xf4000000-0xf5ffffff] [ 0.255609] pci_bus 0000:08: resource 0 io: [0x6000-0x6fff] [ 0.255611] pci_bus 0000:08: resource 1 mem: [0xfc000000-0xfc0fffff] [ 0.255614] pci_bus 0000:08: resource 2 pref mem [0xc0000000-0xc01fffff] [ 0.255617] pci_bus 0000:09: resource 1 mem: [0xfc100000-0xfc1fffff] [ 0.255619] pci_bus 0000:09: resource 3 io: [0x00-0xffff] [ 0.255622] pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffff] [ 0.255660] NET: Registered protocol family 2 [ 0.255762] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.256077] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.256492] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.256701] TCP: Hash tables configured (established 131072 bind 65536) [ 0.256703] TCP reno registered [ 0.256777] NET: Registered protocol family 1 [ 0.256926] pci 0000:01:00.0: Boot video device [ 0.256959] Simple Boot Flag at 0x36 set to 0x1 [ 0.257120] cpufreq-nforce2: No nForce2 chipset. [ 0.257145] Scanning for low memory corruption every 60 seconds [ 0.257263] audit: initializing netlink socket (disabled) [ 0.257272] type=2000 audit(1287004648.254:1): initialized [ 0.267350] highmem bounce pool size: 64 pages [ 0.267356] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.268899] VFS: Disk quotas dquot_6.5.2 [ 0.268958] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.269522] fuse init (API version 7.13) [ 0.269610] msgmni has been set to 1665 [ 0.269814] alg: No test for stdrng (krng) [ 0.269866] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.269869] io scheduler noop registered [ 0.269871] io scheduler anticipatory registered [ 0.269873] io scheduler deadline registered [ 0.269912] io scheduler cfq registered (default) [ 0.270061] alloc irq_desc for 24 on node -1 [ 0.270063] alloc kstat_irqs on node -1 [ 0.270071] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.270077] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.270198] alloc irq_desc for 25 on node -1 [ 0.270200] alloc kstat_irqs on node -1 [ 0.270209] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.270226] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.270361] alloc irq_desc for 26 on node -1 [ 0.270363] alloc kstat_irqs on node -1 [ 0.270371] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X [ 0.270381] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.270518] alloc irq_desc for 27 on node -1 [ 0.270520] alloc kstat_irqs on node -1 [ 0.270527] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X [ 0.270537] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.270672] alloc irq_desc for 28 on node -1 [ 0.270674] alloc kstat_irqs on node -1 [ 0.270681] pcieport 0000:00:1c.5: irq 28 for MSI/MSI-X [ 0.270691] pcieport 0000:00:1c.5: setting latency timer to 64 [ 0.270788] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.270960] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.370354] ACPI: AC Adapter [ADP1] (on-line) [ 0.370438] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.370441] ACPI: Power Button [PWRB] [ 0.370487] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.370489] ACPI: Sleep Button [SLPB] [ 0.370530] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 0.371517] ACPI: Lid Switch [LID0] [ 0.371563] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.371565] ACPI: Power Button [PWRF] [ 0.371816] Freeing initrd memory: 7786k freed [ 0.372497] ACPI: SSDT bdf1aca0 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.373145] ACPI: SSDT bdf19620 00575 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.375643] Monitor-Mwait will be used to enter C-1 state [ 0.375682] Monitor-Mwait will be used to enter C-2 state [ 0.375707] Monitor-Mwait will be used to enter C-3 state [ 0.375716] Marking TSC unstable due to TSC halts in idle [ 0.375836] Switching to clocksource hpet [ 0.375929] processor LNXCPU:00: registered as cooling_device0 [ 0.376409] ACPI: SSDT bdf1aa20 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.376843] ACPI: SSDT bdf1af20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.377908] processor LNXCPU:01: registered as cooling_device1 [ 0.382359] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.382367] ACPI: Thermal Zone [TZ00] (67 C) [ 0.383933] thermal LNXTHERM:02: registered as thermal_zone1 [ 0.383941] ACPI: Thermal Zone [TZ01] (42 C) [ 0.385375] thermal LNXTHERM:03: registered as thermal_zone2 [ 0.385385] ACPI: Thermal Zone [TZ02] (55 C) [ 0.385512] isapnp: Scanning for PnP cards... [ 0.389659] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.391360] brd: module loaded [ 0.391822] loop: module loaded [ 0.391937] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.392447] Fixed MDIO Bus: probed [ 0.392480] PPP generic driver version 2.4.2 [ 0.392514] tun: Universal TUN/TAP device driver, 1.6 [ 0.392516] tun: (C) 1999-2004 Max Krasnyansky [ 0.392625] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.392648] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 0.392660] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.392663] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.392692] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.392721] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.396615] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.397566] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfc404800 [ 0.406237] ACPI: Battery Slot [BAT0] (battery present) [ 0.412018] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.412096] usb usb1: configuration #1 chosen from 1 choice [ 0.412123] hub 1-0:1.0: USB hub found [ 0.412130] hub 1-0:1.0: 6 ports detected [ 0.412240] alloc irq_desc for 23 on node -1 [ 0.412242] alloc kstat_irqs on node -1 [ 0.412248] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.412258] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.412293] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.412325] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.412387] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.416268] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.416291] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc404c00 [ 0.432012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.432087] usb usb2: configuration #1 chosen from 1 choice [ 0.432113] hub 2-0:1.0: USB hub found [ 0.432119] hub 2-0:1.0: 6 ports detected [ 0.432176] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.432192] uhci_hcd: USB Universal Host Controller Interface driver [ 0.432211] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.432217] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.432220] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.432251] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.432282] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 [ 0.432369] usb usb3: configuration #1 chosen from 1 choice [ 0.432393] hub 3-0:1.0: USB hub found [ 0.432400] hub 3-0:1.0: 2 ports detected [ 0.432443] alloc irq_desc for 21 on node -1 [ 0.432445] alloc kstat_irqs on node -1 [ 0.432450] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.432458] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.432461] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.432496] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.432527] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 [ 0.432616] usb usb4: configuration #1 chosen from 1 choice [ 0.432641] hub 4-0:1.0: USB hub found [ 0.432647] hub 4-0:1.0: 2 ports detected [ 0.432689] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 0.432695] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.432698] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.432727] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.432750] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840 [ 0.432839] usb usb5: configuration #1 chosen from 1 choice [ 0.432864] hub 5-0:1.0: USB hub found [ 0.432870] hub 5-0:1.0: 2 ports detected [ 0.432913] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.432919] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.432923] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.432952] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.432975] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860 [ 0.433057] usb usb6: configuration #1 chosen from 1 choice [ 0.433082] hub 6-0:1.0: USB hub found [ 0.433088] hub 6-0:1.0: 2 ports detected [ 0.433130] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.433136] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.433139] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.433174] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.433198] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880 [ 0.433281] usb usb7: configuration #1 chosen from 1 choice [ 0.433306] hub 7-0:1.0: USB hub found [ 0.433312] hub 7-0:1.0: 2 ports detected [ 0.433356] alloc irq_desc for 18 on node -1 [ 0.433358] alloc kstat_irqs on node -1 [ 0.433362] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.433368] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.433372] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.433403] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.433433] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 [ 0.433514] usb usb8: configuration #1 chosen from 1 choice [ 0.433539] hub 8-0:1.0: USB hub found [ 0.433545] hub 8-0:1.0: 2 ports detected [ 0.433640] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.438458] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.438464] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.438573] mice: PS/2 mouse device common for all mice [ 0.438721] rtc_cmos 00:06: RTC can wake from S4 [ 0.438753] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.438778] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.438872] device-mapper: uevent: version 1.0.3 [ 0.438963] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.439026] device-mapper: multipath: version 1.1.0 loaded [ 0.439029] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.439132] EISA: Probing bus 0 at eisa.0 [ 0.439137] Cannot allocate resource for EISA slot 1 [ 0.439140] Cannot allocate resource for EISA slot 2 [ 0.439142] Cannot allocate resource for EISA slot 3 [ 0.439144] Cannot allocate resource for EISA slot 4 [ 0.439146] Cannot allocate resource for EISA slot 5 [ 0.439148] Cannot allocate resource for EISA slot 6 [ 0.439156] EISA: Detected 0 cards. [ 0.439287] cpuidle: using governor ladder [ 0.439406] cpuidle: using governor menu [ 0.439834] TCP cubic registered [ 0.439989] NET: Registered protocol family 10 [ 0.440463] lo: Disabled Privacy Extensions [ 0.440803] NET: Registered protocol family 17 [ 0.441418] Using IPI No-Shortcut mode [ 0.441485] PM: Resume from disk failed. [ 0.441495] registered taskstats version 1 [ 0.442216] Magic number: 14:947:297 [ 0.442276] rtc_cmos 00:06: setting system clock to 2010-10-13 21:17:29 UTC (1287004649) [ 0.442279] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.442281] EDD information not available. [ 0.446694] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 0.736027] usb 1-6: new high speed USB device using ehci_hcd and address 2 [ 0.739515] isapnp: No Plug & Play device found [ 0.739553] Freeing unused kernel memory: 656k freed [ 0.739887] Write protecting the kernel text: 4684k [ 0.739930] Write protecting the kernel read-only data: 1840k [ 0.755704] udev: starting version 151 [ 0.875145] ahci 0000:00:1f.2: version 3.0 [ 0.875166] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.875205] alloc irq_desc for 29 on node -1 [ 0.875208] alloc kstat_irqs on node -1 [ 0.875218] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X [ 0.875286] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x23 impl SATA mode [ 0.875290] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc sxs [ 0.875296] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.875483] scsi0 : ahci [ 0.875582] scsi1 : ahci [ 0.875642] scsi2 : ahci [ 0.875703] scsi3 : ahci [ 0.875761] scsi4 : ahci [ 0.875819] scsi5 : ahci [ 0.875866] ata1: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404100 irq 29 [ 0.875869] ata2: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 29 [ 0.875872] ata3: DUMMY [ 0.875873] ata4: DUMMY [ 0.875875] ata5: DUMMY [ 0.875877] ata6: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 29 [ 0.878421] ohci1394 0000:09:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.882400] tg3.c:v3.102 (September 1, 2009) [ 0.882567] tg3 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.882576] tg3 0000:08:00.0: setting latency timer to 64 [ 0.934062] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc100000-fc1007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 0.944258] usb 1-6: configuration #1 chosen from 1 choice [ 1.356085] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.357624] ata1.00: ATA-8: ST9500325AS, 0001SDM1, max UDMA/133 [ 1.357628] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.359655] ata1.00: configured for UDMA/133 [ 1.359774] scsi 0:0:0:0: Direct-Access ATA ST9500325AS 0001 PQ: 0 ANSI: 5 [ 1.359918] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.360006] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.360052] sd 0:0:0:0: [sda] Write Protect is off [ 1.360055] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.360078] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.360207] sda: sda1 sda2 [ 1.368724] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.384034] usb 6-1: new full speed USB device using uhci_hcd and address 2 [ 1.417462] eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address 00:22:19:f5:ab:ab [ 1.417465] eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 1.417468] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.417470] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 1.563094] usb 6-1: configuration #1 chosen from 1 choice [ 1.566050] hub 6-1:1.0: USB hub found [ 1.568030] hub 6-1:1.0: 3 ports detected [ 1.760036] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.764093] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.764119] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GA10N, A105, max UDMA/133 [ 1.768981] ata2.00: configured for UDMA/133 [ 1.773345] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GA10N A105 PQ: 0 ANSI: 5 [ 1.784578] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy [ 1.784582] Uniform CD-ROM driver Revision: 3.20 [ 1.784687] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.784734] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.794007] ata6.00: ATA-8: ST9250421ASG, DE17, max UDMA/133 [ 1.794012] ata6.00: 488397168 sectors, multi 16: LBA48 [ 1.812034] usb 6-2: new low speed USB device using uhci_hcd and address 3 [ 1.839551] ata6.00: configured for UDMA/133 [ 1.839649] scsi 5:0:0:0: Direct-Access ATA ST9250421ASG DE17 PQ: 0 ANSI: 5 [ 1.839768] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 1.839789] sd 5:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.839841] sd 5:0:0:0: [sdb] Write Protect is off [ 1.839844] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.839869] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.840044] sdb: sdb1 sdb2 < sdb5 > [ 1.890285] sd 5:0:0:0: [sdb] Attached SCSI disk [ 1.991112] usb 6-2: configuration #1 chosen from 1 choice [ 2.014527] usbcore: registered new interface driver hiddev [ 2.028285] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input6 [ 2.028360] generic-usb 0003:0A81:0205.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1d.0-2/input0 [ 2.056332] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input7 [ 2.056419] generic-usb 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1d.0-2/input1 [ 2.056439] usbcore: registered new interface driver usbhid [ 2.056442] usbhid: v2.6:USB HID core driver [ 2.086017] usb 6-1.1: new full speed USB device using uhci_hcd and address 4 [ 2.208156] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0000000000000000] [ 2.215107] usb 6-1.1: configuration #1 chosen from 1 choice [ 2.222266] input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.0/input/input8 [ 2.222332] generic-usb 0003:0A5C:4502.0003: input,hidraw2: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:1d.0-1.1/input0 [ 2.266259] EXT4-fs (sdb1): mounted filesystem with ordered data mode [ 2.298018] usb 6-1.2: new full speed USB device using uhci_hcd and address 5 [ 2.420131] usb 6-1.2: configuration #1 chosen from 1 choice [ 2.428336] input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.0/input/input9 [ 2.428414] generic-usb 0003:0A5C:4503.0004: input,hidraw3: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:1d.0-1.2/input0 [ 2.502032] usb 6-1.3: new full speed USB device using uhci_hcd and address 6 [ 2.637096] usb 6-1.3: configuration #1 chosen from 1 choice [ 15.256647] udev: starting version 151 [ 15.361175] lp: driver loaded but no devices found [ 15.384253] Adding 5847032k swap on /dev/sdb5. Priority:-1 extents:1 across:5847032k [ 15.464783] udev: renamed network interface eth0 to eth1 [ 15.491951] vga16fb: initializing [ 15.491955] vga16fb: mapped to 0xc00a0000 [ 15.492047] fb0: VGA16 VGA frame buffer device [ 15.495943] Linux agpgart interface v0.103 [ 15.527145] cfg80211: Calling CRDA to update world regulatory domain [ 15.529947] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 15.535527] ACPI Warning: _BQC returned an invalid level (20090903/video-631) [ 15.572485] acpi device:02: registered as cooling_device2 [ 15.572795] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input10 [ 15.572884] ACPI: Video Device [M86] (multi-head: yes rom: no post: no) [ 15.580716] sdhci: Secure Digital Host Controller Interface driver [ 15.580719] sdhci: Copyright(c) Pierre Ossman [ 15.605234] Bluetooth: Core ver 2.15 [ 15.611578] NET: Registered protocol family 31 [ 15.611581] Bluetooth: HCI device and connection manager initialized [ 15.611584] Bluetooth: HCI socket layer initialized [ 15.613327] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 15.613441] usbcore: registered new interface driver btusb [ 15.614257] input: Dell WMI hotkeys as /devices/virtual/input/input11 [ 15.618241] cfg80211: World regulatory domain updated: [ 15.618244] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 15.618247] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.618249] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.618251] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.618253] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.618255] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.648799] sdhci-pci 0000:09:01.1: SDHCI controller found [1180:0822] (rev 22) [ 15.648824] sdhci-pci 0000:09:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 15.649875] Registered led device: mmc0:: [ 15.649912] mmc0: SDHCI controller on PCI [0000:09:01.1] using DMA [ 15.658071] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 15.658075] Disabling lock debugging due to kernel taint [ 15.763482] Console: switching to colour frame buffer device 80x30 [ 15.775847] type=1505 audit(1287004664.829:2): operation="profile_load" pid=710 name="/sbin/dhclient3" [ 15.776557] type=1505 audit(1287004664.833:3): operation="profile_load" pid=710 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 15.776922] type=1505 audit(1287004664.833:4): operation="profile_load" pid=710 name="/usr/lib/connman/scripts/dhclient-script" [ 15.796808] [fglrx] Maximum main memory to use for locked dma buffers: 2845 MBytes. [ 15.797207] [fglrx] vendor: 1002 device: 9593 count: 1 [ 15.797775] [fglrx] ioport: bar 1, base 0x2000, size: 0x100 [ 15.797791] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 15.797797] pci 0000:01:00.0: setting latency timer to 64 [ 15.798012] [fglrx] Kernel PAT support is enabled [ 15.798034] [fglrx] module loaded - fglrx 8.72.11 [Apr 8 2010] with 1 minors [ 15.810885] Linux video capture interface: v2.00 [ 15.825342] mmc0: new high speed SDHC card at address 1234 [ 15.826716] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:63fa) [ 15.831361] input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input12 [ 15.831420] usbcore: registered new interface driver uvcvideo [ 15.831422] USB Video Class driver (v0.1.0) [ 15.848853] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k [ 15.848857] iwlagn: Copyright(c) 2003-2009 Intel Corporation [ 15.848945] iwlagn 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 15.848975] iwlagn 0000:04:00.0: setting latency timer to 64 [ 15.849185] iwlagn 0000:04:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54 [ 15.865847] mmcblk0: mmc0:1234 SA08G 7.40 GiB [ 15.865914] mmcblk0: p1 [ 15.933978] iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 15.934036] alloc irq_desc for 30 on node -1 [ 15.934039] alloc kstat_irqs on node -1 [ 15.934058] iwlagn 0000:04:00.0: irq 30 for MSI/MSI-X [ 15.948980] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 15.959380] udev: renamed network interface wlan0 to wlan1 [ 15.978616] alloc irq_desc for 22 on node -1 [ 15.978620] alloc kstat_irqs on node -1 [ 15.978627] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 15.978706] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 16.049830] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input13 [ 16.062503] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 16.062657] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 16.062783] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 16.063636] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 16.063663] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 16.243215] alloc irq_desc for 31 on node -1 [ 16.243218] alloc kstat_irqs on node -1 [ 16.243244] tg3 0000:08:00.0: irq 31 for MSI/MSI-X [ 16.346431] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 16.352111] type=1505 audit(1287004665.409:5): operation="profile_load" pid=1015 name="/usr/share/gdm/guest-session/Xsession" [ 16.355320] type=1505 audit(1287004665.409:6): operation="profile_replace" pid=1016 name="/sbin/dhclient3" [ 16.356296] type=1505 audit(1287004665.413:7): operation="profile_replace" pid=1016 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 16.356666] type=1505 audit(1287004665.413:8): operation="profile_replace" pid=1016 name="/usr/lib/connman/scripts/dhclient-script" [ 16.360161] type=1505 audit(1287004665.417:9): operation="profile_load" pid=1018 name="/usr/bin/evince" [ 16.362025] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000 [ 16.374471] type=1505 audit(1287004665.429:10): operation="profile_load" pid=1018 name="/usr/bin/evince-previewer" [ 16.382018] type=1505 audit(1287004665.437:11): operation="profile_load" pid=1018 name="/usr/bin/evince-thumbnailer" [ 16.409568] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input17 [ 16.729730] /dev/vmmon[1117]: Module vmmon: registered with major=10 minor=165 [ 16.729737] /dev/vmmon[1117]: Module vmmon: initialized [ 16.738004] /dev/vmci[1125]: VMCI: Driver initialized. [ 16.738344] /dev/vmci[1125]: Module vmci: registered with major=10 minor=55 [ 16.738347] /dev/vmci[1125]: Module vmci: initialized [ 16.813109] ppdev: user-space parallel port driver [ 17.300919] alloc irq_desc for 32 on node -1 [ 17.300922] alloc kstat_irqs on node -1 [ 17.300933] fglrx_pci 0000:01:00.0: irq 32 for MSI/MSI-X [ 17.301673] [fglrx] Firegl kernel thread PID: 1204 [ 17.301857] [fglrx] IRQ 32 Enabled [ 17.427290] /dev/vmnet: open called by PID 1205 (vmnet-dhcpd) [ 17.427299] /dev/vmnet: hub 1 does not exist, allocating memory. [ 17.427321] /dev/vmnet: port on hub 1 successfully opened [ 17.429078] /dev/vmnet: open called by PID 1207 (vmnet-netifup) [ 17.429086] /dev/vmnet: port on hub 1 successfully opened [ 17.496497] /dev/vmnet: open called by PID 1210 (vmnet-dhcpd) [ 17.496506] /dev/vmnet: hub 8 does not exist, allocating memory. [ 17.496530] /dev/vmnet: port on hub 8 successfully opened [ 17.500407] /dev/vmnet: open called by PID 1215 (vmnet-natd) [ 17.500417] /dev/vmnet: port on hub 8 successfully opened [ 17.502672] /dev/vmnet: open called by PID 1216 (vmnet-netifup) [ 17.502681] /dev/vmnet: port on hub 8 successfully opened [ 17.915725] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 17.915728] vboxdrv: Successfully done. [ 17.915730] vboxdrv: Found 2 processor cores. [ 17.916371] vboxdrv: fAsync=0 offMin=0x19c offMax=0xed3 [ 17.917330] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 17.917333] vboxdrv: Successfully loaded version 3.2.10 (interface 0x00140001). [ 17.946446] tg3: eth1: Link is up at 100 Mbps, full duplex. [ 17.946449] tg3: eth1: Flow control is on for TX and on for RX. [ 17.946633] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 17.946812] /dev/vmnet: open called by PID 1190 (vmnet-bridge) [ 17.946822] /dev/vmnet: hub 0 does not exist, allocating memory. [ 17.946843] /dev/vmnet: port on hub 0 successfully opened [ 17.946857] bridge-eth1: up [ 17.946859] bridge-eth1: attached [ 18.115842] [fglrx] Gart USWC size:933 M. [ 18.115845] [fglrx] Gart cacheable size:369 M. [ 18.115851] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 18.115854] [fglrx] Reserved FB block: Unshared offset:fd13000, size:2ed000 [ 18.115857] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 [ 18.164475] Bluetooth: L2CAP ver 2.14 [ 18.164478] Bluetooth: L2CAP socket layer initialized [ 18.179413] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 18.179416] Bluetooth: BNEP filters: protocol multicast [ 18.187118] Bridge firewalling registered [ 18.200213] Bluetooth: SCO (Voice Link) ver 0.6 [ 18.200216] Bluetooth: SCO socket layer initialized [ 18.312875] Bluetooth: RFCOMM TTY layer initialized [ 18.312879] Bluetooth: RFCOMM socket layer initialized [ 18.312881] Bluetooth: RFCOMM ver 1.11 [ 20.740042] CE: hpet increasing min_delta_ns to 15000 nsec [ 22.612363] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 23.801034] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 27.876026] vmnet1: no IPv6 routers present [ 28.296046] vmnet8: no IPv6 routers present [ 44.831251] lo: Disabled Privacy Extensions [ 2551.344057] CE: hpet increasing min_delta_ns to 22500 nsec [11064.168018] lo: Disabled Privacy Extensions