[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #39-Ubuntu SMP Wed Jul 28 06:07:29 UTC 2010 (Ubuntu 2.6.32-24.39-generic 2.6.32.15+drm33.5) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000004f7d3800 (usable) [ 0.000000] BIOS-e820: 000000004f7d3800 - 0000000050000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved) [ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x4f7d3 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 040000000 mask FF0000000 write-back [ 0.000000] 2 base 04F800000 mask FFF800000 uncachable [ 0.000000] 3 base 0FEDA0000 mask FFFFE0000 write-through [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000004f7d3800 (usable) [ 0.000000] modified: 000000004f7d3800 - 0000000050000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0007000 (reserved) [ 0.000000] modified: 00000000f0008000 - 00000000f000c000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed20000 - 00000000fee10000 (reserved) [ 0.000000] modified: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 37857000 - 37fef275 [ 0.000000] Allocated new RAMDISK: 008e0000 - 01078275 [ 0.000000] Move RAMDISK from 0000000037857000 - 0000000037fef274 to 008e0000 - 01078274 [ 0.000000] ACPI: RSDP 000fc970 00014 (v00 DELL ) [ 0.000000] ACPI: RSDT 4f7d3fd3 0003C (v01 DELL D05 27D60B07 ASL 00000061) [ 0.000000] ACPI: FACP 4f7d4c00 00074 (v01 DELL D05 27D60B07 ASL 00000061) [ 0.000000] ACPI: DSDT 4f7d5800 0324F (v01 INT430 SYSFexxx 00001001 MSFT 0100000E) [ 0.000000] ACPI: FACS 4f7e4000 00040 [ 0.000000] ACPI: APIC 4f7d5400 00068 (v01 DELL D05 27D60B07 ASL 00000047) [ 0.000000] ACPI: MCFG 4f7d53c0 0003E (v16 DELL D05 27D60B07 ASL 00000061) [ 0.000000] ACPI: SSDT 4f7d43e2 002C2 (v01 PmRef Cpu0Ist 00003000 INTL 20030522) [ 0.000000] ACPI: SSDT 4f7d420a 001D8 (v01 PmRef Cpu0Cst 00003001 INTL 20030522) [ 0.000000] ACPI: SSDT 4f7d400f 001FB (v01 PmRef CpuPm 00003000 INTL 20030522) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 383MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008dbeb8] TEXT DATA BSS ==> [0000100000 - 00008dbeb8] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [00008dc000 - 00008df188] BRK ==> [00008dc000 - 00008df188] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008e0000 - 0001078275] NEW RAMDISK ==> [00008e0000 - 0001078275] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0004f7d3 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0004f7d3 [ 0.000000] On node 0 totalpages: 325486 [ 0.000000] free_area_init_node: node 0, pgdat c0798780, node_mem_map c107a000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 768 pages used for memmap [ 0.000000] HighMem zone: 97493 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 50000000:90000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s36056 r0 d21288 u2097152 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 322942 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=3f5080a9-ae12-486e-a6db-2be1c9fae21f ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 6511740 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0004f7d3) [ 0.000000] Memory: 1267548k/1302348k available (4679k kernel code, 33340k reserved, 2116k data, 660k init, 393044k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0848000 ( 660 kB) [ 0.000000] .data : 0xc0591d43 - 0xc07a2e88 (2116 kB) [ 0.000000] .text : 0xc0100000 - 0xc0591d43 (4679 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1695.599 MHz processor. [ 0.008008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3391.19 BogoMIPS (lpj=6782396) [ 0.008037] Security Framework initialized [ 0.008073] AppArmor: AppArmor initialized [ 0.008083] Mount-cache hash table entries: 512 [ 0.008298] Initializing cgroup subsys ns [ 0.008305] Initializing cgroup subsys cpuacct [ 0.008310] Initializing cgroup subsys memory [ 0.008321] Initializing cgroup subsys devices [ 0.008325] Initializing cgroup subsys freezer [ 0.008328] Initializing cgroup subsys net_cls [ 0.008361] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008365] CPU: L2 cache: 2048K [ 0.008371] mce: CPU supports 5 MCE banks [ 0.008387] CPU0: Thermal monitoring enabled (TM1) [ 0.008401] Performance Events: p6 PMU driver. [ 0.008412] ... version: 0 [ 0.008414] ... bit width: 32 [ 0.008416] ... generic registers: 2 [ 0.008419] ... value mask: 00000000ffffffff [ 0.008421] ... max period: 000000007fffffff [ 0.008424] ... fixed-purpose events: 0 [ 0.008426] ... event mask: 0000000000000003 [ 0.008433] Checking 'hlt' instruction... OK. [ 0.025029] SMP alternatives: switching to UP code [ 0.033459] ACPI: Core revision 20090903 [ 0.041610] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.041618] ftrace: allocating 21780 entries in 43 pages [ 0.044091] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.044473] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.086243] CPU0: Intel(R) Pentium(R) M processor 1.70GHz stepping 08 [ 0.088001] Brought up 1 CPUs [ 0.088001] Total of 1 processors activated (3391.19 BogoMIPS). [ 0.088001] CPU0 attaching NULL sched-domain. [ 0.088001] devtmpfs: initialized [ 0.088001] regulator: core version 0.5 [ 0.088001] Time: 12:05:40 Date: 09/24/10 [ 0.088001] NET: Registered protocol family 16 [ 0.088001] EISA bus registered [ 0.088001] ACPI: bus type pci registered [ 0.088001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.088001] PCI: MCFG area at e0000000 reserved in E820 [ 0.088001] PCI: Using MMCONFIG for extended config space [ 0.088001] PCI: Using configuration type 1 for base access [ 0.088001] bio: create slab at 0 [ 0.088001] ACPI: EC: Look up EC in DSDT [ 0.101699] ACPI: Interpreter enabled [ 0.101717] ACPI: (supports S0 S3 S4 S5) [ 0.101740] ACPI: Using IOAPIC for interrupt routing [ 0.128777] ACPI: No dock devices found. [ 0.143284] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.143382] pci 0000:00:02.0: reg 10 32bit mmio: [0xdff00000-0xdff7ffff] [ 0.143388] pci 0000:00:02.0: reg 14 io port: [0xeff8-0xefff] [ 0.143394] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xc0000000-0xcfffffff] [ 0.143400] pci 0000:00:02.0: reg 1c 32bit mmio: [0xdfec0000-0xdfefffff] [ 0.143438] pci 0000:00:02.1: reg 10 32bit mmio: [0xdff80000-0xdfffffff] [ 0.143556] pci 0000:00:1b.0: reg 10 64bit mmio: [0xdfebc000-0xdfebffff] [ 0.143618] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.143624] pci 0000:00:1b.0: PME# disabled [ 0.143719] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.143725] pci 0000:00:1c.0: PME# disabled [ 0.143825] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.143830] pci 0000:00:1c.3: PME# disabled [ 0.143898] pci 0000:00:1d.0: reg 20 io port: [0xbf80-0xbf9f] [ 0.143964] pci 0000:00:1d.1: reg 20 io port: [0xbf60-0xbf7f] [ 0.144039] pci 0000:00:1d.2: reg 20 io port: [0xbf40-0xbf5f] [ 0.144106] pci 0000:00:1d.3: reg 20 io port: [0xbf20-0xbf3f] [ 0.144175] pci 0000:00:1d.7: reg 10 32bit mmio: [0xb0000000-0xb00003ff] [ 0.144240] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.144246] pci 0000:00:1d.7: PME# disabled [ 0.144408] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.144417] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.144422] pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO [ 0.144427] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0900-097f [ 0.144465] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7] [ 0.144474] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7] [ 0.144482] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177] [ 0.144492] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377] [ 0.144501] pci 0000:00:1f.1: reg 20 io port: [0xbfa0-0xbfaf] [ 0.144656] pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff] [ 0.144662] pci 0000:00:1c.3: bridge 32bit mmio: [0xdfc00000-0xdfdfffff] [ 0.144671] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xd0000000-0xd01fffff] [ 0.144718] pci 0000:02:00.0: reg 10 32bit mmio: [0xdfbfc000-0xdfbfdfff] [ 0.144777] pci 0000:02:00.0: supports D1 D2 [ 0.144780] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.144785] pci 0000:02:00.0: PME# disabled [ 0.144819] pci 0000:02:03.0: reg 10 32bit mmio: [0xdfbfe000-0xdfbfffff] [ 0.144917] pci 0000:00:1e.0: transparent bridge [ 0.144925] pci 0000:00:1e.0: bridge 32bit mmio: [0xdfb00000-0xdfbfffff] [ 0.144953] pci_bus 0000:00: on NUMA node 0 [ 0.144958] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.145278] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.145398] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.145490] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.154830] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 0.154970] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 0.155107] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11) [ 0.155243] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *7 9 10 11) [ 0.155362] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.155483] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.155606] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.155736] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.155746] vgaarb: loaded [ 0.155903] SCSI subsystem initialized [ 0.155958] libata version 3.00 loaded. [ 0.156052] usbcore: registered new interface driver usbfs [ 0.156067] usbcore: registered new interface driver hub [ 0.156095] usbcore: registered new device driver usb [ 0.156247] ACPI: WMI: Mapper loaded [ 0.156250] PCI: Using ACPI for IRQ routing [ 0.156416] NetLabel: Initializing [ 0.156418] NetLabel: domain hash size = 128 [ 0.156420] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.156438] NetLabel: unlabeled traffic allowed by default [ 0.156602] hpet clockevent registered [ 0.156606] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.156614] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.156620] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.160022] Switching to clocksource tsc [ 0.162443] AppArmor: AppArmor Filesystem Enabled [ 0.162463] pnp: PnP ACPI init [ 0.162477] ACPI: bus type pnp registered [ 0.194705] pnp 00:02: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.194710] pnp 00:02: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.194786] pnp 00:03: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.194791] pnp 00:03: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.194795] pnp 00:03: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.195706] pnp: PnP ACPI: found 11 devices [ 0.195709] ACPI: ACPI bus type pnp unregistered [ 0.195713] PnPBIOS: Disabled by ACPI PNP [ 0.195730] system 00:00: iomem range 0x0-0x9fbff could not be reserved [ 0.195734] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved [ 0.195737] system 00:00: iomem range 0xc0000-0xcffff could not be reserved [ 0.195741] system 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 0.195745] system 00:00: iomem range 0x100000-0x4f7d37ff could not be reserved [ 0.195749] system 00:00: iomem range 0x4f7d3800-0x4f7fffff has been reserved [ 0.195752] system 00:00: iomem range 0x4f800000-0x4fffffff has been reserved [ 0.195756] system 00:00: iomem range 0xfeda0000-0xfedfffff has been reserved [ 0.195760] system 00:00: iomem range 0xffb00000-0xffffffff has been reserved [ 0.195764] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved [ 0.195767] system 00:00: iomem range 0xfee00000-0xfee0ffff has been reserved [ 0.195771] system 00:00: iomem range 0xfed20000-0xfed9ffff has been reserved [ 0.195775] system 00:00: iomem range 0xf0000000-0xf0003fff has been reserved [ 0.195779] system 00:00: iomem range 0xf0004000-0xf0004fff has been reserved [ 0.195782] system 00:00: iomem range 0xf0005000-0xf0005fff has been reserved [ 0.195786] system 00:00: iomem range 0xf0006000-0xf0006fff has been reserved [ 0.195790] system 00:00: iomem range 0xf0008000-0xf000bfff has been reserved [ 0.195793] system 00:00: iomem range 0xe0000000-0xefffffff has been reserved [ 0.195801] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.195808] system 00:03: ioport range 0xf400-0xf4fe has been reserved [ 0.195812] system 00:03: ioport range 0x1080-0x10bf has been reserved [ 0.195816] system 00:03: ioport range 0x10c0-0x10df has been reserved [ 0.195819] system 00:03: ioport range 0x10e0-0x10ff has been reserved [ 0.195827] system 00:08: ioport range 0x900-0x90f has been reserved [ 0.195830] system 00:08: ioport range 0x910-0x91f has been reserved [ 0.195834] system 00:08: ioport range 0x920-0x92f has been reserved [ 0.195837] system 00:08: ioport range 0x930-0x93f has been reserved [ 0.195841] system 00:08: ioport range 0x940-0x97f has been reserved [ 0.230608] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b [ 0.230613] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 0.230620] pci 0000:00:1c.0: MEM window: 0x50000000-0x501fffff [ 0.230626] pci 0000:00:1c.0: PREFETCH window: 0x00000050200000-0x000000503fffff [ 0.230636] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0c [ 0.230640] pci 0000:00:1c.3: IO window: 0xd000-0xdfff [ 0.230647] pci 0000:00:1c.3: MEM window: 0xdfc00000-0xdfdfffff [ 0.230654] pci 0000:00:1c.3: PREFETCH window: 0x000000d0000000-0x000000d01fffff [ 0.230663] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.230666] pci 0000:00:1e.0: IO window: disabled [ 0.230673] pci 0000:00:1e.0: MEM window: 0xdfb00000-0xdfbfffff [ 0.230678] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.230700] alloc irq_desc for 16 on node -1 [ 0.230703] alloc kstat_irqs on node -1 [ 0.230709] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.230716] pci 0000:00:1c.0: setting latency timer to 64 [ 0.230727] alloc irq_desc for 19 on node -1 [ 0.230729] alloc kstat_irqs on node -1 [ 0.230733] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.230739] pci 0000:00:1c.3: setting latency timer to 64 [ 0.230748] pci 0000:00:1e.0: setting latency timer to 64 [ 0.230754] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.230757] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.230761] pci_bus 0000:0b: resource 0 io: [0x2000-0x2fff] [ 0.230764] pci_bus 0000:0b: resource 1 mem: [0x50000000-0x501fffff] [ 0.230767] pci_bus 0000:0b: resource 2 pref mem [0x50200000-0x503fffff] [ 0.230771] pci_bus 0000:0c: resource 0 io: [0xd000-0xdfff] [ 0.230774] pci_bus 0000:0c: resource 1 mem: [0xdfc00000-0xdfdfffff] [ 0.230777] pci_bus 0000:0c: resource 2 pref mem [0xd0000000-0xd01fffff] [ 0.230781] pci_bus 0000:02: resource 1 mem: [0xdfb00000-0xdfbfffff] [ 0.230784] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.230787] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.230825] NET: Registered protocol family 2 [ 0.230935] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.231317] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.232528] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.233288] TCP: Hash tables configured (established 131072 bind 65536) [ 0.233294] TCP reno registered [ 0.233462] NET: Registered protocol family 1 [ 0.233493] pci 0000:00:02.0: Boot video device [ 0.233842] cpufreq-nforce2: No nForce2 chipset. [ 0.233880] Scanning for low memory corruption every 60 seconds [ 0.234051] audit: initializing netlink socket (disabled) [ 0.234067] type=2000 audit(1285329939.231:1): initialized [ 0.246372] Trying to unpack rootfs image as initramfs... [ 0.260624] highmem bounce pool size: 64 pages [ 0.260632] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.268003] VFS: Disk quotas dquot_6.5.2 [ 0.268096] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.268860] fuse init (API version 7.13) [ 0.268962] msgmni has been set to 1710 [ 0.269209] alg: No test for stdrng (krng) [ 0.269281] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.269285] io scheduler noop registered [ 0.269287] io scheduler anticipatory registered [ 0.269289] io scheduler deadline registered [ 0.269336] io scheduler cfq registered (default) [ 0.269512] alloc irq_desc for 24 on node -1 [ 0.269516] alloc kstat_irqs on node -1 [ 0.269530] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.269543] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.269708] alloc irq_desc for 25 on node -1 [ 0.269710] alloc kstat_irqs on node -1 [ 0.269719] pcieport 0000:00:1c.3: irq 25 for MSI/MSI-X [ 0.269730] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.269847] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.269940] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.270339] ACPI: AC Adapter [AC] (on-line) [ 0.270455] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.270814] ACPI: Lid Switch [LID] [ 0.270868] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.270877] ACPI: Power Button [PBTN] [ 0.270928] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.270931] ACPI: Sleep Button [SBTN] [ 0.271468] Marking TSC unstable due to TSC halts in idle [ 0.271554] processor LNXCPU:00: registered as cooling_device0 [ 0.279792] Switching to clocksource hpet [ 0.281591] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.281604] ACPI: Thermal Zone [THM] (52 C) [ 0.292668] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.294210] brd: module loaded [ 0.294764] loop: module loaded [ 0.294861] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.294975] ata_piix 0000:00:1f.1: version 2.13 [ 0.294994] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.295045] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.295255] isapnp: Scanning for PnP cards... [ 0.304038] scsi0 : ata_piix [ 0.304135] scsi1 : ata_piix [ 0.380139] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14 [ 0.380144] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15 [ 0.380604] Fixed MDIO Bus: probed [ 0.380646] PPP generic driver version 2.4.2 [ 0.380734] tun: Universal TUN/TAP device driver, 1.6 [ 0.380737] tun: (C) 1999-2004 Max Krasnyansky [ 0.380848] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.380885] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.380908] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.380913] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.380953] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.380992] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.384873] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.392862] ata2: port disabled. ignoring. [ 0.392903] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xb0000000 [ 0.412422] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.412591] usb usb1: configuration #1 chosen from 1 choice [ 0.412631] hub 1-0:1.0: USB hub found [ 0.412647] hub 1-0:1.0: 8 ports detected [ 0.412742] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.412765] uhci_hcd: USB Universal Host Controller Interface driver [ 0.412833] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.412845] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.412850] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.412901] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.412935] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80 [ 0.413045] usb usb2: configuration #1 chosen from 1 choice [ 0.413081] hub 2-0:1.0: USB hub found [ 0.413090] hub 2-0:1.0: 2 ports detected [ 0.413141] alloc irq_desc for 17 on node -1 [ 0.413144] alloc kstat_irqs on node -1 [ 0.413152] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.413160] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.413164] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.413200] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.413241] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000bf60 [ 0.413351] usb usb3: configuration #1 chosen from 1 choice [ 0.413384] hub 3-0:1.0: USB hub found [ 0.413392] hub 3-0:1.0: 2 ports detected [ 0.413440] alloc irq_desc for 18 on node -1 [ 0.413443] alloc kstat_irqs on node -1 [ 0.413447] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.413455] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.413459] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.413503] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.413539] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bf40 [ 0.413656] usb usb4: configuration #1 chosen from 1 choice [ 0.413687] hub 4-0:1.0: USB hub found [ 0.413694] hub 4-0:1.0: 2 ports detected [ 0.413749] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.413758] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.413762] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.413802] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.413839] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000bf20 [ 0.413939] usb usb5: configuration #1 chosen from 1 choice [ 0.413968] hub 5-0:1.0: USB hub found [ 0.413975] hub 5-0:1.0: 2 ports detected [ 0.414087] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.414332] i8042.c: Warning: Keylock active. [ 0.420581] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.420594] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.420780] mice: PS/2 mouse device common for all mice [ 0.420955] rtc_cmos 00:06: RTC can wake from S4 [ 0.421010] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.421063] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.421256] device-mapper: uevent: version 1.0.3 [ 0.421413] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.421966] device-mapper: multipath: version 1.1.0 loaded [ 0.421969] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.422136] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.424444] EISA: Probing bus 0 at eisa.0 [ 0.424454] Cannot allocate resource for EISA slot 1 [ 0.424456] Cannot allocate resource for EISA slot 2 [ 0.424481] EISA: Detected 0 cards. [ 0.472505] cpuidle: using governor ladder [ 0.472594] cpuidle: using governor menu [ 0.473116] TCP cubic registered [ 0.473316] NET: Registered protocol family 10 [ 0.473840] lo: Disabled Privacy Extensions [ 0.474190] NET: Registered protocol family 17 [ 0.474526] Using IPI No-Shortcut mode [ 0.474645] PM: Resume from disk failed. [ 0.474668] registered taskstats version 1 [ 0.474948] Magic number: 10:606:77 [ 0.475074] rtc_cmos 00:06: setting system clock to 2010-09-24 12:05:40 UTC (1285329940) [ 0.475078] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.475080] EDD information not available. [ 0.657445] ACPI: Battery Slot [BAT0] (battery present) [ 0.660763] ata1.00: ATA-7: SAMSUNG MP0804H, UE200-16, max UDMA/100 [ 0.660767] ata1.00: 156301488 sectors, multi 8: LBA48 [ 0.660813] ata1.01: ATAPI: PHILIPS DVD+/-RW SDVD8820, AD15, max UDMA/33 [ 0.668951] ata1.00: configured for UDMA/100 [ 0.684484] ata1.01: configured for UDMA/33 [ 0.845048] Freeing initrd memory: 7776k freed [ 0.940561] isapnp: No Plug & Play device found [ 0.940814] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MP0804H UE20 PQ: 0 ANSI: 5 [ 0.941087] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.941995] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 0.942053] sd 0:0:0:0: [sda] Write Protect is off [ 0.942058] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.942087] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.942269] sda: sda1 sda2 < [ 0.954362] scsi 0:0:1:0: CD-ROM PHILIPS DVD+-RW SDVD8820 AD15 PQ: 0 ANSI: 5 [ 0.991099] sda5 > [ 0.993982] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.005178] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 1.005182] Uniform CD-ROM driver Revision: 3.20 [ 1.005277] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 1.005342] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 1.005404] Freeing unused kernel memory: 660k freed [ 1.005965] Write protecting the kernel text: 4680k [ 1.006007] Write protecting the kernel read-only data: 1840k [ 1.024461] udev: starting version 151 [ 1.287931] b43-pci-bridge 0000:02:03.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.344080] ssb: Sonics Silicon Backplane found on PCI device 0000:02:03.0 [ 1.392290] b44 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.452096] ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0 [ 1.452125] b44.c:v2.0 [ 1.453947] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 1.472882] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:15:c5:72:e3:a3 [ 3.676979] Adding 3227640k swap on /dev/sda5. Priority:-1 extents:1 across:3227640k [ 3.950132] udev: starting version 151 [ 5.244541] type=1505 audit(1285329945.268:2): operation="profile_load" pid=468 name="/sbin/dhclient3" [ 5.245252] type=1505 audit(1285329945.268:3): operation="profile_load" pid=468 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 5.245638] type=1505 audit(1285329945.268:4): operation="profile_load" pid=468 name="/usr/lib/connman/scripts/dhclient-script" [ 5.301962] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 5.475196] intel_rng: FWH not detected [ 5.487748] Linux agpgart interface v0.103 [ 5.571731] cfg80211: Calling CRDA to update world regulatory domain [ 5.642019] dell-wmi: No known WMI GUID found [ 5.800302] agpgart-intel 0000:00:00.0: Intel 915GM Chipset [ 5.800985] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 5.806679] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 [ 5.904277] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input5 [ 5.904427] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 5.904486] ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) (20090903/nspredef-433) [ 5.904645] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input6 [ 5.904752] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 6.423632] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps: 0xa04713/0x200000 [ 6.460623] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 6.489009] cfg80211: World regulatory domain updated: [ 6.489013] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6.489017] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.489020] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6.489024] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6.489027] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.489030] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.717749] b43-phy0: Broadcom 4318 WLAN found (core revision 9) [ 6.875627] [drm] Initialized drm 1.1.0 20060810 [ 6.963479] lp: driver loaded but no devices found [ 7.571792] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.571800] i915 0000:00:02.0: setting latency timer to 64 [ 7.576272] [drm] set up 7M of stolen space [ 7.679034] composite sync not supported [ 7.679503] [drm] initialized overlay support [ 8.128398] phy0: Selected rate control algorithm 'minstrel' [ 8.129179] Registered led device: b43-phy0::tx [ 8.129204] Registered led device: b43-phy0::rx [ 8.129223] Registered led device: b43-phy0::radio [ 8.129307] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] [ 8.373787] composite sync not supported [ 8.529024] fb0: inteldrmfb frame buffer device [ 8.529029] registered panic notifier [ 8.529040] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 8.962730] vga16fb: initializing [ 8.962735] vga16fb: mapped to 0xc00a0000 [ 8.962740] vga16fb: not registering due to another framebuffer present [ 9.558884] Console: switching to colour frame buffer device 160x50 [ 10.728030] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 10.728063] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 10.936823] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 10.937140] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 12.645659] composite sync not supported [ 13.903937] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.952059] b43 ssb0:0: firmware: requesting b43/ucode5.fw [ 14.090845] b43 ssb0:0: firmware: requesting b43-open/ucode5.fw [ 14.094280] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found [ 14.094361] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found [ 14.094428] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 14.393723] type=1505 audit(1285329954.418:5): operation="profile_load" pid=996 name="/usr/share/gdm/guest-session/Xsession" [ 14.395833] type=1505 audit(1285329954.418:6): operation="profile_replace" pid=1007 name="/sbin/dhclient3" [ 14.396837] type=1505 audit(1285329954.420:7): operation="profile_replace" pid=1007 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 14.397228] type=1505 audit(1285329954.420:8): operation="profile_replace" pid=1007 name="/usr/lib/connman/scripts/dhclient-script" [ 14.595061] type=1505 audit(1285329954.618:9): operation="profile_load" pid=1008 name="/usr/bin/evince" [ 14.604516] type=1505 audit(1285329954.628:10): operation="profile_load" pid=1008 name="/usr/bin/evince-previewer" [ 14.610271] type=1505 audit(1285329954.632:11): operation="profile_load" pid=1008 name="/usr/bin/evince-thumbnailer" [ 14.713224] type=1505 audit(1285329954.736:12): operation="profile_load" pid=1010 name="/usr/lib/cups/backend/cups-pdf" [ 14.714085] type=1505 audit(1285329954.736:13): operation="profile_load" pid=1010 name="/usr/sbin/cupsd" [ 14.780056] b43 ssb0:0: firmware: requesting b43/ucode5.fw [ 14.781693] b43 ssb0:0: firmware: requesting b43-open/ucode5.fw [ 14.784863] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found [ 14.784942] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found [ 14.785010] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 14.798421] type=1505 audit(1285329954.820:14): operation="profile_load" pid=1011 name="/usr/sbin/tcpdump" [ 17.105403] ppdev: user-space parallel port driver [ 21.760452] composite sync not supported [ 22.349496] composite sync not supported [ 26.125545] composite sync not supported [ 26.713484] composite sync not supported [ 27.301484] composite sync not supported [ 32.704264] composite sync not supported [ 34.858745] composite sync not supported [ 93.816198] b44: eth0: Link is up at 100 Mbps, full duplex. [ 93.816203] b44: eth0: Flow control is off for TX and off for RX. [ 93.816508] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 104.424036] eth0: no IPv6 routers present [ 2775.711919] composite sync not supported [ 4354.001046] b44: eth0: Link is down. [ 4654.000229] b44: eth0: Link is up at 100 Mbps, full duplex. [ 4654.000239] b44: eth0: Flow control is off for TX and off for RX. [ 8459.894478] b44: eth0: powering down PHY [ 8461.296264] PM: Syncing filesystems ... done. [ 8461.332129] PM: Preparing system for mem sleep [ 8461.332135] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 8461.335539] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 8461.335590] PM: Entering mem sleep [ 8461.335608] Suspending console(s) (use no_console_suspend to debug) [ 8461.336055] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 8461.443410] sd 0:0:0:0: [sda] Stopping disk [ 8461.912736] PM: suspend of drv:sd dev:0:0:0:0 complete after 576.682 msecs [ 8462.289950] PM: suspend of drv:psmouse dev:serio1 complete after 377.147 msecs [ 8462.388704] b43-pci-bridge 0000:02:03.0: PCI INT A disabled [ 8462.388761] b44 0000:02:00.0: PCI INT A disabled [ 8462.388767] ACPI handle has no context! [ 8462.404223] ata2: port disabled. ignoring. [ 8462.404275] ata_piix 0000:00:1f.1: PCI INT A disabled [ 8462.404293] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 8462.404303] uhci_hcd 0000:00:1d.3: PCI INT D disabled [ 8462.404313] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 8462.404323] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 8462.404333] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 8462.612100] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 8462.628169] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 223.822 msecs [ 8462.683455] i915 0000:00:02.0: PCI INT A disabled [ 8462.696413] PM: suspend of devices complete after 1360.573 msecs [ 8462.696417] PM: suspend devices took 1.364 seconds [ 8462.712247] PM: late suspend of devices complete after 15.825 msecs [ 8462.716158] ACPI: Preparing to enter system sleep state S3 [ 8462.716568] Disabling non-boot CPUs ... [ 8462.716591] Back to C! [ 8462.716591] CPU0: Thermal monitoring enabled (TM1) [ 8462.716591] Force enabled HPET at resume [ 8462.716591] ACPI: Waking up from system sleep state S3 [ 8462.720696] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 8462.720706] i915 0000:00:02.0: restoring config space at offset 0x7 (was 0x0, writing 0xdfec0000) [ 8462.720710] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0x8, writing 0xc0000008) [ 8462.720715] i915 0000:00:02.0: restoring config space at offset 0x5 (was 0x1, writing 0xeff9) [ 8462.720719] i915 0000:00:02.0: restoring config space at offset 0x4 (was 0x0, writing 0xdff00000) [ 8462.720725] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [ 8462.720745] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xdff80000) [ 8462.720751] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [ 8462.720776] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 8462.720797] HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xdfebc004) [ 8462.720803] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 8462.720810] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) [ 8462.720845] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x20100) [ 8462.720858] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x50315021) [ 8462.720864] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0x50105000) [ 8462.720870] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x0, writing 0x2020) [ 8462.720876] pcieport 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0b00) [ 8462.720885] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 8462.720892] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 8462.720944] pcieport 0000:00:1c.3: restoring config space at offset 0xf (was 0x400, writing 0x20400) [ 8462.720957] pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xd011d001) [ 8462.720963] pcieport 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xdfd0dfc0) [ 8462.720969] pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0x0, writing 0xd0d0) [ 8462.720975] pcieport 0000:00:1c.3: restoring config space at offset 0x6 (was 0x0, writing 0xd0c00) [ 8462.720984] pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 8462.720992] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 8462.721051] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 8462.721066] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20a) [ 8462.721081] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0xbf61) [ 8462.721096] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001) [ 8462.721109] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x309) [ 8462.721124] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0xbf41) [ 8462.721138] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001) [ 8462.721152] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x407) [ 8462.721167] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0xbf21) [ 8462.721181] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001) [ 8462.721224] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 8462.721259] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 8462.721265] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xdfb0dfb0) [ 8462.721271] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x2280e0f0, writing 0x228000f0) [ 8462.721284] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100107) [ 8462.721329] pci 0000:00:1f.0: restoring config space at offset 0x1 (was 0x2000007, writing 0x2000107) [ 8462.721344] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 8462.721369] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005) [ 8462.721391] b44 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x109) [ 8462.721412] b44 0000:02:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xdfbfc000) [ 8462.721418] b44 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x4000) [ 8462.721426] b44 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100106) [ 8462.721444] b43-pci-bridge 0000:02:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 8462.721465] b43-pci-bridge 0000:02:03.0: restoring config space at offset 0x4 (was 0x0, writing 0xdfbfe000) [ 8462.721471] b43-pci-bridge 0000:02:03.0: restoring config space at offset 0x3 (was 0x0, writing 0x4000) [ 8462.721479] b43-pci-bridge 0000:02:03.0: restoring config space at offset 0x1 (was 0x0, writing 0x106) [ 8462.721776] PM: early resume of devices complete after 1.215 msecs [ 8463.004742] PM: resume of drv:battery dev:PNP0C0A:00 complete after 277.264 msecs [ 8463.010484] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8463.010490] i915 0000:00:02.0: setting latency timer to 64 [ 8463.010932] render error detected, EIR: 0x00000010 [ 8463.010934] page table error [ 8463.010936] PGTBL_ER: 0x00000001 [ 8463.010940] [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking [ 8463.010955] render error detected, EIR: 0x00000010 [ 8463.010957] page table error [ 8463.010959] PGTBL_ER: 0x00000001 [ 8463.104328] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8463.104335] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 8463.104366] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8463.104372] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 8463.104399] usb usb2: root hub lost power or was reset [ 8463.104423] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 8463.104429] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 8463.104453] usb usb3: root hub lost power or was reset [ 8463.104475] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 8463.104482] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 8463.104506] usb usb4: root hub lost power or was reset [ 8463.104527] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 8463.104534] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 8463.104558] usb usb5: root hub lost power or was reset [ 8463.104579] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8463.104586] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 8463.104592] usb usb1: root hub lost power or was reset [ 8463.108493] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 8463.108508] pci 0000:00:1e.0: setting latency timer to 64 [ 8463.108524] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8463.108530] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 8463.108568] ata1.00: _GTF evaluation failed (AE 0x1001) [ 8463.108571] ata1.01: _GTF evaluation failed (AE 0x1001) [ 8463.108638] ata2: port disabled. ignoring. [ 8463.108661] b44 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 8463.128173] b43-pci-bridge 0000:02:03.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 8463.724066] PM: resume of drv:usb dev:usb1 complete after 575.407 msecs [ 8463.726154] sd 0:0:0:0: [sda] Starting disk [ 8465.472923] ata1.00: configured for UDMA/100 [ 8465.488505] ata1.01: configured for UDMA/33 [ 8465.500271] PM: resume of drv:sd dev:0:0:0:0 complete after 1774.115 msecs [ 8465.520365] PM: resume of devices complete after 2793.229 msecs [ 8465.520501] PM: resume devices took 2.800 seconds [ 8465.520537] PM: Finishing wakeup. [ 8465.520539] Restarting tasks ... done. [ 8465.985572] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8466.036286] b43 ssb0:0: firmware: requesting b43/ucode5.fw [ 8466.341691] b43 ssb0:0: firmware: requesting b43-open/ucode5.fw [ 8466.347503] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found [ 8466.347509] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found [ 8466.347513] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 8466.368086] b43 ssb0:0: firmware: requesting b43/ucode5.fw [ 8466.374732] b43 ssb0:0: firmware: requesting b43-open/ucode5.fw [ 8466.386381] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found [ 8466.386388] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found [ 8466.386392] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 8517.000361] b44: eth0: Link is up at 100 Mbps, full duplex. [ 8517.000372] b44: eth0: Flow control is off for TX and off for RX. [ 8517.001088] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 8527.804039] eth0: no IPv6 routers present [ 8530.000115] b44: eth0: Link is down. [ 8537.000359] b44: eth0: Link is up at 100 Mbps, full duplex. [ 8537.000370] b44: eth0: Flow control is off for TX and off for RX. [ 8548.000251] b44: eth0: Link is down. [ 8551.000203] b44: eth0: Link is up at 100 Mbps, full duplex. [ 8551.000208] b44: eth0: Flow control is off for TX and off for RX. [ 8552.000124] b44: eth0: Link is down. [ 8579.000200] b44: eth0: Link is up at 100 Mbps, full duplex. [ 8579.000205] b44: eth0: Flow control is off for TX and off for RX. [ 8590.000122] b44: eth0: Link is down. [ 8607.000362] b44: eth0: Link is up at 100 Mbps, full duplex. [ 8607.000373] b44: eth0: Flow control is off for TX and off for RX. [ 8625.000114] b44: eth0: Link is down. [ 8627.000218] b44: eth0: Link is up at 100 Mbps, full duplex. [ 8627.000228] b44: eth0: Flow control is off for TX and off for RX. [ 9096.000123] b44: eth0: Link is down. [ 9103.000199] b44: eth0: Link is up at 100 Mbps, full duplex. [ 9103.000204] b44: eth0: Flow control is off for TX and off for RX. [ 9106.000107] b44: eth0: Link is down. [ 9139.000362] b44: eth0: Link is up at 100 Mbps, full duplex. [ 9139.000372] b44: eth0: Flow control is off for TX and off for RX.