[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-21-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:09:38 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2) [ 0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- pci=nomsi locale=pt_BR console-setup/layoutcode?=br console-setup/modelcode?=abnt2 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffa0000 (usable) [ 0.000000] BIOS-e820: 00000000cffa0000 - 00000000cffae000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cffae000 - 00000000cffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000130000000 aka 4864M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcffa0 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009e000 (usable) [ 0.000000] modified: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cffa0000 (usable) [ 0.000000] modified: 00000000cffa0000 - 00000000cffae000 (ACPI data) [ 0.000000] modified: 00000000cffae000 - 00000000cffe0000 (ACPI NVS) [ 0.000000] modified: 00000000cffe0000 - 00000000d0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] modified: 00000000ff700000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000cffa0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cffa0000 page 4k [ 0.000000] kernel direct mapping tables up to cffa0000 @ 10000-13000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0130000000 page 2M [ 0.000000] kernel direct mapping tables up to 130000000 @ 12000-14000 [ 0.000000] RAMDISK: 7f69e000 - 7ffffcaf [ 0.000000] ACPI: RSDP 00000000000fa0f0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000cffa0000 00044 (v01 050408 RSDT1619 20080504 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cffa0200 00084 (v01 050408 FACP1619 20080504 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000cffa04a0 09662 (v01 C78XA C78XA030 00000030 INTL 20051117) [ 0.000000] ACPI: FACS 00000000cffae000 00040 [ 0.000000] ACPI: APIC 00000000cffa0390 00080 (v01 050408 APIC1619 20080504 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cffa0410 0003C (v01 050408 OEMMCFG 20080504 MSFT 00000097) [ 0.000000] ACPI: WDRT 00000000cffa0450 00047 (v01 050408 NV-WDRT 20080504 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cffae040 00073 (v01 050408 OEMB1619 20080504 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000cffa9b10 00038 (v01 050408 OEMHPET0 20080504 MSFT 00000097) [ 0.000000] ACPI: INFO 00000000cffae0c0 00124 (v01 050408 AMDINFO 20080504 MSFT 00000097) [ 0.000000] ACPI: NVHD 00000000cffae1f0 00284 (v01 050408 NVHDCP 20080504 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000130000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] NODE_DATA [0000000000013000 - 0000000000017fff] [ 0.000000] bootmap [0000000000018000 - 000000000003dfff] pages 26 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a29e64] TEXT DATA BSS ==> [0001000000 - 0001a29e64] [ 0.000000] #3 [007f69e000 - 007ffffcaf] RAMDISK ==> [007f69e000 - 007ffffcaf] [ 0.000000] #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000] [ 0.000000] #5 [0001a2a000 - 0001a2a1a9] BRK ==> [0001a2a000 - 0001a2a1a9] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000cffa0 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1048366 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 104 pages reserved [ 0.000000] DMA zone: 3822 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833496 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cffa0000 - 00000000cffae000 [ 0.000000] PM: Registered nosave memory: 00000000cffae000 - 00000000cffe0000 [ 0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000 [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff700000 [ 0.000000] PM: Registered nosave memory: 00000000ff700000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91544 r8192 d23144 u524288 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031238 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- pci=nomsi locale=pt_BR console-setup/layoutcode?=br console-setup/modelcode?=abnt2 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 272c000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Memory: 4047792k/4980736k available (5409k kernel code, 787272k absent, 145672k reserved, 2976k data, 876k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2199.563 MHz processor. [ 0.020006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.12 BogoMIPS (lpj=21995600) [ 0.020030] Security Framework initialized [ 0.020049] AppArmor: AppArmor initialized [ 0.020506] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.022078] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.022754] Mount-cache hash table entries: 256 [ 0.022881] Initializing cgroup subsys ns [ 0.022885] Initializing cgroup subsys cpuacct [ 0.022889] Initializing cgroup subsys memory [ 0.022896] Initializing cgroup subsys devices [ 0.022898] Initializing cgroup subsys freezer [ 0.022900] Initializing cgroup subsys net_cls [ 0.022919] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.022922] CPU: L2 Cache: 512K (64 bytes/line) [ 0.022924] CPU 0/0x0 -> Node 0 [ 0.022927] tseg: 0000000000 [ 0.022944] CPU: Physical Processor ID: 0 [ 0.022945] CPU: Processor Core ID: 0 [ 0.022948] mce: CPU supports 6 MCE banks [ 0.022958] using C1E aware idle routine [ 0.022960] Performance Events: AMD PMU driver. [ 0.022965] ... version: 0 [ 0.022966] ... bit width: 48 [ 0.022968] ... generic registers: 4 [ 0.022970] ... value mask: 0000ffffffffffff [ 0.022972] ... max period: 00007fffffffffff [ 0.022973] ... fixed-purpose events: 0 [ 0.022975] ... event mask: 000000000000000f [ 0.024658] ACPI: Core revision 20090903 [ 0.043144] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.043149] ftrace: allocating 22518 entries in 89 pages [ 0.049622] Setting APIC routing to flat [ 0.050355] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.150379] CPU0: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03 [ 0.160000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.030000] Initializing CPU#1 [ 0.030000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.030000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.030000] CPU 1/0x1 -> Node 0 [ 0.030000] CPU: Physical Processor ID: 0 [ 0.030000] CPU: Processor Core ID: 1 [ 0.310106] CPU1: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03 [ 0.310118] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.320063] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.030000] Initializing CPU#2 [ 0.030000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.030000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.030000] CPU 2/0x2 -> Node 0 [ 0.030000] CPU: Physical Processor ID: 0 [ 0.030000] CPU: Processor Core ID: 2 [ 0.480020] CPU2: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03 [ 0.480032] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.490060] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.030000] Initializing CPU#3 [ 0.030000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.030000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.030000] CPU 3/0x3 -> Node 0 [ 0.030000] CPU: Physical Processor ID: 0 [ 0.030000] CPU: Processor Core ID: 3 [ 0.650040] CPU3: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03 [ 0.650051] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.660011] Brought up 4 CPUs [ 0.660013] Total of 4 processors activated (17599.26 BogoMIPS). [ 0.661069] CPU0 attaching sched-domain: [ 0.661072] domain 0: span 0-3 level MC [ 0.661074] groups: 0 1 2 3 [ 0.661080] CPU1 attaching sched-domain: [ 0.661082] domain 0: span 0-3 level MC [ 0.661083] groups: 1 2 3 0 [ 0.661090] CPU2 attaching sched-domain: [ 0.661092] domain 0: span 0-3 level MC [ 0.661094] groups: 2 3 0 1 [ 0.661098] CPU3 attaching sched-domain: [ 0.661100] domain 0: span 0-3 level MC [ 0.661101] groups: 3 0 1 2 [ 0.661202] devtmpfs: initialized [ 0.661202] regulator: core version 0.5 [ 0.661202] Time: 0:56:36 Date: 09/12/10 [ 0.661202] NET: Registered protocol family 16 [ 0.661202] node 0 link 0: io port [1000, ffffff] [ 0.661202] Trying to unpack rootfs image as initramfs... [ 0.661202] node 0 link 0: io port [2000, 2fff] [ 0.661202] TOM: 00000000d0000000 aka 3328M [ 0.661202] Fam 10h mmconf [e0000000, e00fffff] [ 0.661202] node 0 link 0: mmio [e0000000, efffffff] ==> [e0100000, efffffff] [ 0.661202] node 0 link 0: mmio [a0000, bffff] [ 0.661202] node 0 link 0: mmio [d0000000, fe0bffff] ==> [d0000000, dfffffff] and [e0100000, fe0bffff] [ 0.661202] TOM2: 0000000130000000 aka 4864M [ 0.661202] bus: [00,07] on node 0 link 0 [ 0.661202] bus: 00 index 0 io port: [0, ffff] [ 0.661202] bus: 00 index 1 mmio: [e0100000, ffffffff] [ 0.661202] bus: 00 index 2 mmio: [a0000, bffff] [ 0.661202] bus: 00 index 3 mmio: [d0000000, dfffffff] [ 0.661202] bus: 00 index 4 mmio: [130000000, fcffffffff] [ 0.661202] ACPI: bus type pci registered [ 0.661202] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.661202] PCI: Not using MMCONFIG. [ 0.661202] PCI: Using configuration type 1 for base access [ 0.661202] PCI: Using configuration type 1 for extended access [ 0.661202] bio: create slab at 0 [ 0.661202] ACPI: EC: Look up EC in DSDT [ 0.670377] ACPI: Executed 1 blocks of module-level executable AML code [ 0.679458] ACPI: Interpreter enabled [ 0.679463] ACPI: (supports S0 S3 S4 S5) [ 0.679482] ACPI: Using IOAPIC for interrupt routing [ 0.679545] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.687442] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.695248] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.709932] ACPI: No dock devices found. [ 0.710395] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.710731] pci 0000:00:01.0: reg 10 io port: [0x2f00-0x2fff] [ 0.710804] pci 0000:00:01.1: reg 10 io port: [0x2900-0x293f] [ 0.710825] pci 0000:00:01.1: reg 20 io port: [0x2d00-0x2d3f] [ 0.710832] pci 0000:00:01.1: reg 24 io port: [0x2e00-0x2e3f] [ 0.710863] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.710870] pci 0000:00:01.1: PME# disabled [ 0.710964] pci 0000:00:01.3: reg 10 32bit mmio: [0xf9f80000-0xf9ffffff] [ 0.711152] pci 0000:00:02.0: reg 10 32bit mmio: [0xf9f7f000-0xf9f7ffff] [ 0.711199] pci 0000:00:02.0: supports D1 D2 [ 0.711201] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.711206] pci 0000:00:02.0: PME# disabled [ 0.711248] pci 0000:00:02.1: reg 10 32bit mmio: [0xf9f7ec00-0xf9f7ecff] [ 0.711304] pci 0000:00:02.1: supports D1 D2 [ 0.711305] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.711310] pci 0000:00:02.1: PME# disabled [ 0.711358] pci 0000:00:04.0: reg 10 32bit mmio: [0xf9f7d000-0xf9f7dfff] [ 0.711405] pci 0000:00:04.0: supports D1 D2 [ 0.711407] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.711411] pci 0000:00:04.0: PME# disabled [ 0.711455] pci 0000:00:04.1: reg 10 32bit mmio: [0xf9f7e800-0xf9f7e8ff] [ 0.711510] pci 0000:00:04.1: supports D1 D2 [ 0.711512] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.711516] pci 0000:00:04.1: PME# disabled [ 0.711582] pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf] [ 0.711657] pci 0000:00:07.0: reg 10 32bit mmio: [0xf9f78000-0xf9f7bfff] [ 0.711714] pci 0000:00:07.0: PME# supported from D3hot D3cold [ 0.711718] pci 0000:00:07.0: PME# disabled [ 0.711841] pci 0000:00:09.0: reg 10 io port: [0xc480-0xc487] [ 0.711848] pci 0000:00:09.0: reg 14 io port: [0xc400-0xc403] [ 0.711855] pci 0000:00:09.0: reg 18 io port: [0xc080-0xc087] [ 0.711861] pci 0000:00:09.0: reg 1c io port: [0xc000-0xc003] [ 0.711868] pci 0000:00:09.0: reg 20 io port: [0xbc00-0xbc0f] [ 0.711874] pci 0000:00:09.0: reg 24 32bit mmio: [0xf9f76000-0xf9f77fff] [ 0.712213] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.712221] pci 0000:00:10.0: PME# disabled [ 0.712558] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.712567] pci 0000:00:12.0: PME# disabled [ 0.712901] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.712910] pci 0000:00:13.0: PME# disabled [ 0.713245] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.713253] pci 0000:00:14.0: PME# disabled [ 0.713440] pci 0000:00:08.0: transparent bridge [ 0.713499] pci 0000:02:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] [ 0.713512] pci 0000:02:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.713525] pci 0000:02:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff] [ 0.713533] pci 0000:02:00.0: reg 24 io port: [0xdc00-0xdc7f] [ 0.713541] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfeae0000-0xfeafffff] [ 0.713654] pci 0000:00:10.0: bridge io port: [0xd000-0xdfff] [ 0.713663] pci 0000:00:10.0: bridge 32bit mmio: [0xfa000000-0xfeafffff] [ 0.713679] pci 0000:00:10.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.713856] pci 0000:04:00.0: reg 10 64bit mmio: [0xfebfc000-0xfebfffff] [ 0.713866] pci 0000:04:00.0: reg 18 io port: [0xe800-0xe8ff] [ 0.713896] pci 0000:04:00.0: reg 30 32bit mmio pref: [0xfebc0000-0xfebdffff] [ 0.713945] pci 0000:04:00.0: supports D1 D2 [ 0.713947] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.713952] pci 0000:04:00.0: PME# disabled [ 0.714029] pci 0000:00:13.0: bridge io port: [0xe000-0xefff] [ 0.714037] pci 0000:00:13.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff] [ 0.714217] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.714505] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.714638] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0._PRT] [ 0.714714] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 0.714790] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] [ 0.714862] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT] [ 0.735310] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. [ 0.735607] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 0.735900] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 0.736192] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.736488] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10 [ 0.736782] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled. [ 0.737073] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled. [ 0.737368] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled. [ 0.737658] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled. [ 0.737954] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled. [ 0.738248] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled. [ 0.738542] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled. [ 0.738839] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11 [ 0.739134] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled. [ 0.739428] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled. [ 0.739721] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled. [ 0.740030] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *15 [ 0.740322] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled. [ 0.740618] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled. [ 0.740914] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled. [ 0.741210] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *7 [ 0.741503] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled. [ 0.741809] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled. [ 0.742101] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled. [ 0.742393] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled. [ 0.742688] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled. [ 0.742979] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled. [ 0.743274] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled. [ 0.743565] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled. [ 0.743860] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled. [ 0.744155] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled. [ 0.744446] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled. [ 0.744738] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled. [ 0.745033] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled. [ 0.745325] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled. [ 0.745616] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled. [ 0.745915] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *15 [ 0.746210] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10 [ 0.746506] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled. [ 0.746809] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *15 [ 0.747104] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled. [ 0.747399] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10 [ 0.747695] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11 [ 0.747993] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 [ 0.748336] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.748634] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10 [ 0.748936] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *11 [ 0.749064] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.749066] vgaarb: loaded [ 0.749160] SCSI subsystem initialized [ 0.749205] libata version 3.00 loaded. [ 0.749205] usbcore: registered new interface driver usbfs [ 0.749205] usbcore: registered new interface driver hub [ 0.749205] usbcore: registered new device driver usb [ 0.749205] ACPI: WMI: Mapper loaded [ 0.749205] PCI: Using ACPI for IRQ routing [ 0.749205] NetLabel: Initializing [ 0.749205] NetLabel: domain hash size = 128 [ 0.749205] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.749205] NetLabel: unlabeled traffic allowed by default [ 0.749205] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.749205] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 2.390020] Switching to clocksource tsc [ 2.391532] AppArmor: AppArmor Filesystem Enabled [ 2.391551] pnp: PnP ACPI init [ 2.391574] ACPI: bus type pnp registered [ 2.399230] pnp: PnP ACPI: found 11 devices [ 2.399233] ACPI: ACPI bus type pnp unregistered [ 2.399248] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 2.399251] system 00:04: ioport range 0x800-0x80f has been reserved [ 2.399253] system 00:04: ioport range 0x2000-0x207f has been reserved [ 2.399256] system 00:04: ioport range 0x2080-0x20ff has been reserved [ 2.399258] system 00:04: ioport range 0x2400-0x247f has been reserved [ 2.399261] system 00:04: ioport range 0x2480-0x24ff has been reserved [ 2.399263] system 00:04: ioport range 0x2800-0x287f has been reserved [ 2.399266] system 00:04: ioport range 0x2880-0x28ff has been reserved [ 2.399269] system 00:04: iomem range 0xfed04000-0xfed04fff has been reserved [ 2.399272] system 00:04: iomem range 0xfee01000-0xfeefffff has been reserved [ 2.399277] system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved [ 2.399280] system 00:07: iomem range 0xfee00000-0xfee00fff has been reserved [ 2.399287] system 00:08: ioport range 0xa00-0xa0f has been reserved [ 2.399290] system 00:08: ioport range 0xa10-0xa1f has been reserved [ 2.399295] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved [ 2.399299] system 00:0a: iomem range 0x0-0x9ffff could not be reserved [ 2.399302] system 00:0a: iomem range 0xc0000-0xcffff has been reserved [ 2.399304] system 00:0a: iomem range 0xe0000-0xfffff could not be reserved [ 2.399307] system 00:0a: iomem range 0x100000-0xcfffffff could not be reserved [ 2.399309] system 00:0a: iomem range 0xfec00000-0xffffffff could not be reserved [ 2.404125] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 [ 2.404127] pci 0000:00:08.0: IO window: disabled [ 2.404132] pci 0000:00:08.0: MEM window: disabled [ 2.404136] pci 0000:00:08.0: PREFETCH window: disabled [ 2.404143] pci 0000:00:10.0: PCI bridge, secondary bus 0000:02 [ 2.404148] pci 0000:00:10.0: IO window: 0xd000-0xdfff [ 2.404160] pci 0000:00:10.0: MEM window: 0xfa000000-0xfeafffff [ 2.404169] pci 0000:00:10.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 2.404184] pci 0000:00:12.0: PCI bridge, secondary bus 0000:03 [ 2.404186] pci 0000:00:12.0: IO window: disabled [ 2.404197] pci 0000:00:12.0: MEM window: disabled [ 2.404205] pci 0000:00:12.0: PREFETCH window: disabled [ 2.404220] pci 0000:00:13.0: PCI bridge, secondary bus 0000:04 [ 2.404225] pci 0000:00:13.0: IO window: 0xe000-0xefff [ 2.404236] pci 0000:00:13.0: MEM window: 0xfeb00000-0xfebfffff [ 2.404244] pci 0000:00:13.0: PREFETCH window: disabled [ 2.404259] pci 0000:00:14.0: PCI bridge, secondary bus 0000:05 [ 2.404261] pci 0000:00:14.0: IO window: disabled [ 2.404272] pci 0000:00:14.0: MEM window: disabled [ 2.404280] pci 0000:00:14.0: PREFETCH window: disabled [ 2.404302] pci 0000:00:08.0: setting latency timer to 64 [ 2.404739] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19 [ 2.404743] alloc irq_desc for 19 on node 0 [ 2.404746] alloc kstat_irqs on node 0 [ 2.404757] pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19 [ 2.404766] pci 0000:00:10.0: setting latency timer to 64 [ 2.405194] ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18 [ 2.405197] alloc irq_desc for 18 on node 0 [ 2.405198] alloc kstat_irqs on node 0 [ 2.405208] pci 0000:00:12.0: PCI INT A -> Link[LN2A] -> GSI 18 (level, low) -> IRQ 18 [ 2.405217] pci 0000:00:12.0: setting latency timer to 64 [ 2.405642] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 17 [ 2.405644] alloc irq_desc for 17 on node 0 [ 2.405646] alloc kstat_irqs on node 0 [ 2.405656] pci 0000:00:13.0: PCI INT A -> Link[LN3A] -> GSI 17 (level, low) -> IRQ 17 [ 2.405665] pci 0000:00:13.0: setting latency timer to 64 [ 2.406089] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 16 [ 2.406091] alloc irq_desc for 16 on node 0 [ 2.406093] alloc kstat_irqs on node 0 [ 2.406102] pci 0000:00:14.0: PCI INT A -> Link[LN4A] -> GSI 16 (level, low) -> IRQ 16 [ 2.406111] pci 0000:00:14.0: setting latency timer to 64 [ 2.406118] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 2.406120] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 2.406123] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 2.406126] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 2.406129] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] [ 2.406131] pci_bus 0000:02: resource 1 mem: [0xfa000000-0xfeafffff] [ 2.406134] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff] [ 2.406136] pci_bus 0000:04: resource 0 io: [0xe000-0xefff] [ 2.406139] pci_bus 0000:04: resource 1 mem: [0xfeb00000-0xfebfffff] [ 2.406181] NET: Registered protocol family 2 [ 2.406363] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 2.407613] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 2.411299] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.411747] TCP: Hash tables configured (established 524288 bind 65536) [ 2.411750] TCP reno registered [ 2.411876] NET: Registered protocol family 1 [ 2.450190] pci 0000:00:07.0: Enabling HT MSI Mapping [ 2.450341] pci 0000:00:08.0: Enabling HT MSI Mapping [ 2.450649] pci 0000:02:00.0: Boot video device [ 2.451008] PCI-DMA: Disabling AGP. [ 2.451095] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 2.451097] PCI-DMA: using GART IOMMU. [ 2.451100] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 2.452955] Scanning for low memory corruption every 60 seconds [ 2.453078] audit: initializing netlink socket (disabled) [ 2.453089] type=2000 audit(1284252997.450:1): initialized [ 2.461020] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.462196] VFS: Disk quotas dquot_6.5.2 [ 2.462242] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.462766] fuse init (API version 7.13) [ 2.462834] msgmni has been set to 7905 [ 2.463065] alg: No test for stdrng (krng) [ 2.463118] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.463121] io scheduler noop registered [ 2.463122] io scheduler anticipatory registered [ 2.463124] io scheduler deadline registered [ 2.463154] io scheduler cfq registered (default) [ 2.463477] pcieport 0000:00:10.0: setting latency timer to 64 [ 2.463902] pcieport 0000:00:12.0: setting latency timer to 64 [ 2.464307] pcieport 0000:00:13.0: setting latency timer to 64 [ 2.464710] pcieport 0000:00:14.0: setting latency timer to 64 [ 2.464886] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.464907] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.465004] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.465014] ACPI: Power Button [PWRB] [ 2.465062] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.465065] ACPI: Power Button [PWRF] [ 2.465400] processor LNXCPU:00: registered as cooling_device0 [ 2.465428] processor LNXCPU:01: registered as cooling_device1 [ 2.465455] processor LNXCPU:02: registered as cooling_device2 [ 2.465481] processor LNXCPU:03: registered as cooling_device3 [ 2.473489] Linux agpgart interface v0.103 [ 2.473517] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.474487] brd: module loaded [ 2.474850] loop: module loaded [ 2.474917] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 2.475092] pata_acpi 0000:00:06.0: setting latency timer to 64 [ 2.475357] Fixed MDIO Bus: probed [ 2.475385] PPP generic driver version 2.4.2 [ 2.475413] tun: Universal TUN/TAP device driver, 1.6 [ 2.475414] tun: (C) 1999-2004 Max Krasnyansky [ 2.475475] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.475892] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23 [ 2.475896] alloc irq_desc for 23 on node 0 [ 2.475898] alloc kstat_irqs on node 0 [ 2.475910] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23 [ 2.475929] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 2.475933] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 2.475961] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 2.475993] ehci_hcd 0000:00:02.1: debug port 1 [ 2.476005] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 2.476030] ehci_hcd 0000:00:02.1: irq 23, io mem 0xf9f7ec00 [ 2.490008] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 2.490082] usb usb1: configuration #1 chosen from 1 choice [ 2.490107] hub 1-0:1.0: USB hub found [ 2.490113] hub 1-0:1.0: 6 ports detected [ 2.490607] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 22 [ 2.490609] alloc irq_desc for 22 on node 0 [ 2.490611] alloc kstat_irqs on node 0 [ 2.490621] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 22 (level, low) -> IRQ 22 [ 2.490631] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 2.490634] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 2.490663] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 2.490687] ehci_hcd 0000:00:04.1: debug port 1 [ 2.490698] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported [ 2.490720] ehci_hcd 0000:00:04.1: irq 22, io mem 0xf9f7e800 [ 2.510009] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 2.510062] usb usb2: configuration #1 chosen from 1 choice [ 2.510085] hub 2-0:1.0: USB hub found [ 2.510090] hub 2-0:1.0: 6 ports detected [ 2.510151] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.510589] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21 [ 2.510592] alloc irq_desc for 21 on node 0 [ 2.510593] alloc kstat_irqs on node 0 [ 2.510603] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 21 (level, low) -> IRQ 21 [ 2.510613] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 2.510616] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 2.510643] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 [ 2.510672] ohci_hcd 0000:00:02.0: irq 21, io mem 0xf9f7f000 [ 2.572069] usb usb3: configuration #1 chosen from 1 choice [ 2.572089] hub 3-0:1.0: USB hub found [ 2.572097] hub 3-0:1.0: 6 ports detected [ 2.572581] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 20 [ 2.572583] alloc irq_desc for 20 on node 0 [ 2.572585] alloc kstat_irqs on node 0 [ 2.572594] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 20 (level, low) -> IRQ 20 [ 2.572604] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 2.572607] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 2.572633] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4 [ 2.572663] ohci_hcd 0000:00:04.0: irq 20, io mem 0xf9f7d000 [ 2.632067] usb usb4: configuration #1 chosen from 1 choice [ 2.632087] hub 4-0:1.0: USB hub found [ 2.632095] hub 4-0:1.0: 6 ports detected [ 2.632149] uhci_hcd: USB Universal Host Controller Interface driver [ 2.632220] PNP: No PS/2 controller found. Probing ports directly. [ 2.635039] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.635045] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.635125] mice: PS/2 mouse device common for all mice [ 2.635225] rtc_cmos 00:06: RTC can wake from S4 [ 2.635264] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 2.635333] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 2.635443] device-mapper: uevent: version 1.0.3 [ 2.635527] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 2.635633] device-mapper: multipath: version 1.1.0 loaded [ 2.635636] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.635867] cpuidle: using governor ladder [ 2.635869] cpuidle: using governor menu [ 2.636177] TCP cubic registered [ 2.636284] NET: Registered protocol family 10 [ 2.636688] lo: Disabled Privacy Extensions [ 2.636942] NET: Registered protocol family 17 [ 2.636974] powernow-k8: Found 1 AMD Phenom(tm) 9550 Quad-Core Processor processors (4 cpu cores) (version 2.20.00) [ 2.636982] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [ 2.636984] [Firmware Bug]: powernow-k8: Try again with latest BIOS. [ 2.637068] PM: Resume from disk failed. [ 2.637085] registered taskstats version 1 [ 2.637833] Magic number: 10:805:910 [ 2.637958] rtc_cmos 00:06: setting system clock to 2010-09-12 00:56:38 UTC (1284252998) [ 2.637961] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.637963] EDD information not available. [ 2.719028] Freeing initrd memory: 9607k freed [ 2.722339] Freeing unused kernel memory: 876k freed [ 2.722655] Write protecting the kernel read-only data: 7680k [ 2.740749] udev: starting version 151 [ 2.768193] pata_amd 0000:00:06.0: version 0.4.1 [ 2.768236] pata_amd 0000:00:06.0: setting latency timer to 64 [ 2.771501] scsi0 : pata_amd [ 2.785128] scsi1 : pata_amd [ 2.786213] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 2.786216] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 2.790740] [drm] Initialized drm 1.1.0 20060810 [ 2.791494] sky2 driver version 1.25 [ 2.791996] sky2 0000:04:00.0: PCI INT A -> Link[LN3A] -> GSI 17 (level, low) -> IRQ 17 [ 2.792011] sky2 0000:04:00.0: setting latency timer to 64 [ 2.792062] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 5 [ 2.793325] sky2 eth0: addr 00:e0:61:0f:fc:c4 [ 2.794491] ahci 0000:00:09.0: version 3.0 [ 2.794937] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 2.794941] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 2.795066] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 2.795070] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio [ 2.795075] ahci 0000:00:09.0: setting latency timer to 64 [ 2.795456] scsi2 : ahci [ 2.795548] scsi3 : ahci [ 2.795605] scsi4 : ahci [ 2.795659] scsi5 : ahci [ 2.795714] scsi6 : ahci [ 2.795768] scsi7 : ahci [ 2.795916] ata3: SATA max UDMA/133 abar m8192@0xf9f76000 port 0xf9f76100 irq 23 [ 2.795920] ata4: SATA max UDMA/133 irq 23 [ 2.795923] ata5: SATA max UDMA/133 irq_stat 0x00000040, connection status changed [ 2.795926] ata6: SATA max UDMA/133 abar m8192@0xf9f76000 port 0xf9f76280 irq 23 [ 2.795929] ata7: SATA max UDMA/133 abar m8192@0xf9f76000 port 0xf9f76300 irq 23 [ 2.795932] ata8: SATA max UDMA/133 abar m8192@0xf9f76000 port 0xf9f76380 irq 23 [ 2.951864] ata2: port disabled. ignoring. [ 3.140036] ata3: SATA link down (SStatus 0 SControl 300) [ 3.140061] ata6: SATA link down (SStatus 0 SControl 300) [ 3.140090] ata8: SATA link down (SStatus 0 SControl 300) [ 3.140093] ata7: SATA link down (SStatus 0 SControl 300) [ 3.270022] usb 4-1: new full speed USB device using ohci_hcd and address 2 [ 3.510285] usb 4-1: configuration #1 chosen from 1 choice [ 3.720028] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.720050] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.721748] ata5.00: ATA-7: ST98823AS, 3.04, max UDMA/133 [ 3.721752] ata5.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.723266] ata4.00: ATAPI: HL-DT-ST DVDRAM GH20NS15, IL00, max UDMA/100 [ 3.723776] ata5.00: configured for UDMA/133 [ 3.727104] ata4.00: configured for UDMA/100 [ 3.736000] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS15 IL00 PQ: 0 ANSI: 5 [ 3.739684] sr0: scsi3-mmc drive: 102x/102x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.739688] Uniform CD-ROM driver Revision: 3.20 [ 3.739788] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 3.739846] sr 3:0:0:0: Attached scsi generic sg0 type 5 [ 3.739996] scsi 4:0:0:0: Direct-Access ATA ST98823AS 3.04 PQ: 0 ANSI: 5 [ 3.740142] sd 4:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 3.740161] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 3.740180] sd 4:0:0:0: [sda] Write Protect is off [ 3.740182] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.740203] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.740348] sda: [ 3.850023] usb 3-1: new full speed USB device using ohci_hcd and address 2 [ 3.947298] unknown partition table [ 3.947425] sd 4:0:0:0: [sda] Attached SCSI disk [ 3.972981] nouveau 0000:02:00.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19 [ 3.972989] nouveau 0000:02:00.0: setting latency timer to 64 [ 3.975317] [drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x092a00a2) [ 3.976328] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN [ 4.083288] [drm] nouveau 0000:02:00.0: ... appears to be valid [ 4.083292] [drm] nouveau 0000:02:00.0: BIT BIOS found [ 4.083294] [drm] nouveau 0000:02:00.0: Bios version 62.92.88.00 [ 4.083298] [drm] nouveau 0000:02:00.0: TMDS table revision 2.0 not currently supported [ 4.083301] [drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0 [ 4.083304] [drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 16 4 [ 4.083306] [drm] nouveau 0000:02:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07 [ 4.083309] [drm] nouveau 0000:02:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08 [ 4.083311] [drm] nouveau 0000:02:00.0: 2: 0x00000010: type 0x10 idx 0 tag 0xff [ 4.083314] [drm] nouveau 0000:02:00.0: 3: 0x00000011: type 0x11 idx 0 tag 0xff [ 4.083316] [drm] nouveau 0000:02:00.0: 4: 0x00000013: type 0x13 idx 0 tag 0xff [ 4.083318] [drm] nouveau 0000:02:00.0: Raw DCB entry 0: 02000300 00000028 [ 4.083321] [drm] nouveau 0000:02:00.0: Raw DCB entry 1: 01000302 00020030 [ 4.083323] [drm] nouveau 0000:02:00.0: Raw DCB entry 2: 04011310 00000028 [ 4.083325] [drm] nouveau 0000:02:00.0: Raw DCB entry 3: 02011312 00020030 [ 4.083327] [drm] nouveau 0000:02:00.0: Raw DCB entry 4: 010223f1 00c0c083 [ 4.083337] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xC893 [ 4.088728] usb 3-1: configuration #1 chosen from 1 choice [ 4.101044] usbcore: registered new interface driver hiddev [ 4.106530] input: Microsoft Microsoft® 2.4GHz Transceiver v6.0 as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.0/input/input3 [ 4.106606] generic-usb 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v6.0] on usb-0000:00:02.0-1/input0 [ 4.116892] input: Microsoft Microsoft® 2.4GHz Transceiver v6.0 as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.1/input/input4 [ 4.116978] generic-usb 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v6.0] on usb-0000:00:02.0-1/input1 [ 4.145527] input: Microsoft Microsoft® 2.4GHz Transceiver v6.0 as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.2/input/input5 [ 4.145625] generic-usb 0003:045E:0745.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v6.0] on usb-0000:00:02.0-1/input2 [ 4.145647] usbcore: registered new interface driver usbhid [ 4.145650] usbhid: v2.6:USB HID core driver [ 4.170163] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xCE3B [ 4.210018] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xDBB0 [ 4.210029] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xDCAE [ 4.230114] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xDF16 [ 4.230121] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xDF7B [ 4.270020] [drm] nouveau 0000:02:00.0: 0xDF7B: Condition still not met after 20ms, skipping following opcodes [ 4.270035] [drm] nouveau 0000:02:00.0: 0xB822: parsing output script 0 [ 4.270038] [drm] nouveau 0000:02:00.0: 0xB822: parsing output script 0 [ 4.270040] [drm] nouveau 0000:02:00.0: 0xA3DC: parsing output script 0 [ 4.430041] [TTM] Zone kernel: Available graphics memory: 2029138 kiB. [ 4.430051] [drm] nouveau 0000:02:00.0: 512 MiB VRAM [ 4.451410] [drm] nouveau 0000:02:00.0: 512 MiB GART (aperture) [ 4.452897] [drm] nouveau 0000:02:00.0: Allocating FIFO number 1 [ 4.458087] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 4.458827] [drm] nouveau 0000:02:00.0: Detected a DAC output [ 4.458831] [drm] nouveau 0000:02:00.0: Detected a TMDS output [ 4.458833] [drm] nouveau 0000:02:00.0: Detected a DAC output [ 4.458835] [drm] nouveau 0000:02:00.0: Detected a TMDS output [ 4.458838] [drm] nouveau 0000:02:00.0: DCB encoder 1 unknown [ 4.458841] [drm] nouveau 0000:02:00.0: Detected a DVI-I connector [ 4.458898] [drm] nouveau 0000:02:00.0: Detected a DVI-I connector [ 4.648848] [drm] nouveau 0000:02:00.0: allocated 1920x1080 fb: 0x40250000, bo ffff88012848e600 [ 4.648902] fb0: nouveaufb frame buffer device [ 4.648903] registered panic notifier [ 4.648908] [drm] Initialized nouveau 0.0.15 20090420 for 0000:02:00.0 on minor 0 [ 4.650464] vga16fb: initializing [ 4.650468] vga16fb: mapped to 0xffff8800000a0000 [ 4.650473] vga16fb: not registering due to another framebuffer present [ 4.658235] Console: switching to colour frame buffer device 240x67 [ 4.658256] [drm] nouveau 0000:02:00.0: 0xB826: parsing output script 1 [ 4.658272] [drm] nouveau 0000:02:00.0: 0xB827: parsing output script 2 [ 4.658287] [drm] nouveau 0000:02:00.0: 0xB661: parsing clock script 0 [ 5.228280] xor: automatically using best checksumming function: generic_sse [ 5.270004] generic_sse: 9001.600 MB/sec [ 5.270006] xor: using function: generic_sse (9001.600 MB/sec) [ 5.272266] device-mapper: dm-raid45: initialized v0.2594b [ 6.444838] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 6.486975] ISO 9660 Extensions: RRIP_1991A [ 6.667419] aufs 2-standalone.tree-20091207 [ 6.784481] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 47.896996] udev: starting version 151 [ 52.195571] i2c i2c-2: nForce2 SMBus adapter at 0x2d00 [ 52.195577] ACPI: resource nForce2_smbus [0x2e00-0x2e3f] conflicts with ACPI region SM00 [0x2e00-0x2e3f] [ 52.195580] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 52.195582] nForce2_smbus 0000:00:01.1: Error probing SMB2. [ 52.429398] EDAC MC: Ver: 2.1.0 Apr 16 2010 [ 52.690092] EDAC amd64_edac: Ver: 3.2.0 Apr 16 2010 [ 52.690174] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 52.690183] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 52.690185] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 52.690186] (Note that use of the override may cause unknown side effects.) [ 52.690200] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 52.832433] input: Xbox 360 Wireless Receiver as /devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1:1.0/input/input6 [ 52.832582] input: Xbox 360 Wireless Receiver as /devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1:1.2/input/input7 [ 52.832692] input: Xbox 360 Wireless Receiver as /devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1:1.4/input/input8 [ 52.832801] input: Xbox 360 Wireless Receiver as /devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1:1.6/input/input9 [ 52.832880] usbcore: registered new interface driver xpad [ 52.832882] xpad: X-Box pad driver [ 54.469990] sky2 eth0: enabling interface [ 54.470529] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 56.016871] HDA Intel 0000:00:07.0: power state changed by ACPI to D0 [ 56.017283] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22 [ 56.017289] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22 [ 56.017292] hda_intel: Disable MSI for Nvidia chipset [ 56.017366] HDA Intel 0000:00:07.0: setting latency timer to 64 [ 56.190355] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both [ 56.190880] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 57.980023] hda_codec: ALC888: BIOS auto-probing. [ 58.580096] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/input/input10 [ 62.315042] lp: driver loaded but no devices found [ 62.580122] ppdev: user-space parallel port driver [ 63.566711] [drm] nouveau 0000:02:00.0: Allocating FIFO number 2 [ 63.571896] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 2 [ 66.203756] eth0: no IPv6 routers present [ 153.324104] aufs au_lkup_neg:326:aufsd[451]: I/O Error, b0 LC_COLLATE should be negative. [ 153.324133] hpfax[3044]: segfault at ffffffffffffffff ip 00007fe0314c8a8f sp 00007fff0c76c6b0 error 4 in libc-2.11.1.so[7fe03149e000+178000] [ 538.423930] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 538.425128] SGI XFS Quota Management subsystem [ 538.529001] JFS: nTxBlock = 8192, nTxLock = 65536 [ 538.645261] NTFS driver 2.1.29 [Flags: R/O MODULE]. [ 538.841078] QNX4 filesystem 0.2.3 registered. [ 539.168594] Btrfs loaded [ 590.531530] Adding 3227640k swap on /dev/sda5. Priority:-1 extents:1 across:3227640k [ 639.556483] EXT4-fs (sda1): mounted filesystem with ordered data mode