[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #39-Ubuntu SMP Wed Jul 28 05:14:15 UTC 2010 (Ubuntu 2.6.32-24.39-generic 2.6.32.15+drm33.5) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=/dev/sda3 loop=/ubuntu/disks/root.disk ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] modified: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] modified: 00000000d0000000 - 00000000e0000000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f8000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000003fff0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 003fe00000 page 2M [ 0.000000] 003fe00000 - 003fff0000 page 4k [ 0.000000] kernel direct mapping tables up to 3fff0000 @ 8000-b000 [ 0.000000] RAMDISK: 2f7f1000 - 30033604 [ 0.000000] ACPI: RSDP 00000000000f6330 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 000000003fff3000 00034 (v01 GBT NVDAACPI 42302E31 NVDA 01010101) [ 0.000000] ACPI: FACP 000000003fff3040 00074 (v01 GBT NVDAACPI 42302E31 NVDA 01010101) [ 0.000000] ACPI: DSDT 000000003fff30c0 04907 (v01 GBT NVDAACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 000000003fff0000 00040 [ 0.000000] ACPI: SSDT 000000003fff7a80 00136 (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: MCFG 000000003fff7bc0 0003C (v01 GBT NVDAACPI 42302E31 NVDA 01010101) [ 0.000000] ACPI: APIC 000000003fff7a00 0007C (v01 GBT NVDAACPI 42302E31 NVDA 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000003fff0000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000003fff0000 [ 0.000000] NODE_DATA [0000000000009000 - 000000000000dfff] [ 0.000000] bootmap [000000000000e000 - 0000000000015fff] pages 8 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 003fff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a2fe64] TEXT DATA BSS ==> [0001000000 - 0001a2fe64] [ 0.000000] #3 [002f7f1000 - 0030033604] RAMDISK ==> [002f7f1000 - 0030033604] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [0001a30000 - 0001a3008a] BRK ==> [0001a30000 - 0001a3008a] [ 0.000000] #6 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] [ 0.000000] found SMP MP-table at [ffff8800000f49d0] f49d0 [ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880002000000-ffff880002dfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003fff0 [ 0.000000] On node 0 totalpages: 262026 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 100 pages reserved [ 0.000000] DMA zone: 3838 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3528 pages used for memmap [ 0.000000] DMA32 zone: 254504 pages, LIFO batch:31 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:90000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91544 r8192 d23144 u1048576 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 258342 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=/dev/sda3 loop=/ubuntu/disks/root.disk ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 99f0000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 1014484k/1048512k available (5422k kernel code, 408k absent, 33620k reserved, 2979k data, 880k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 10485760 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2412.247 MHz processor. [ 0.020005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4824.49 BogoMIPS (lpj=24122470) [ 0.020036] Security Framework initialized [ 0.020060] AppArmor: AppArmor initialized [ 0.020163] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.020924] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.021278] Mount-cache hash table entries: 256 [ 0.021432] Initializing cgroup subsys ns [ 0.021436] Initializing cgroup subsys cpuacct [ 0.021440] Initializing cgroup subsys memory [ 0.021451] Initializing cgroup subsys devices [ 0.021453] Initializing cgroup subsys freezer [ 0.021455] Initializing cgroup subsys net_cls [ 0.021476] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.021478] CPU: L2 Cache: 512K (64 bytes/line) [ 0.021481] CPU 0/0x0 -> Node 0 [ 0.021482] tseg: 0000000000 [ 0.021500] mce: CPU supports 5 MCE banks [ 0.021513] using C1E aware idle routine [ 0.021515] Performance Events: AMD PMU driver. [ 0.021520] ... version: 0 [ 0.021521] ... bit width: 48 [ 0.021522] ... generic registers: 4 [ 0.021524] ... value mask: 0000ffffffffffff [ 0.021526] ... max period: 00007fffffffffff [ 0.021527] ... fixed-purpose events: 0 [ 0.021529] ... event mask: 000000000000000f [ 0.021542] SMP alternatives: switching to UP code [ 0.032283] ACPI: Core revision 20090903 [ 0.040011] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.040016] ftrace: allocating 22527 entries in 89 pages [ 0.045960] Setting APIC routing to flat [ 0.046351] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.060000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.060000] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.060000] ..... (found apic 0 pin 0) ... [ 0.166715] ....... works. [ 0.166716] CPU0: AMD Athlon(tm) 64 Processor 3800+ stepping 02 [ 0.170000] Brought up 1 CPUs [ 0.170000] Total of 1 processors activated (4824.49 BogoMIPS). [ 0.170000] CPU0 attaching NULL sched-domain. [ 0.170000] devtmpfs: initialized [ 0.170000] regulator: core version 0.5 [ 0.170000] Time: 12:21:50 Date: 09/11/10 [ 0.170000] NET: Registered protocol family 16 [ 0.170000] node 0 link 0: io port [1000, fffff] [ 0.170000] TOM: 0000000040000000 aka 1024M [ 0.170000] node 0 link 0: mmio [f0000000, f7ffffff] [ 0.170000] node 0 link 0: mmio [a0000, bffff] [ 0.170000] node 0 link 0: mmio [40000000, ffb7ffff] [ 0.170000] bus: [00,ff] on node 0 link 0 [ 0.170000] bus: 00 index 0 io port: [0, ffff] [ 0.170000] bus: 00 index 1 mmio: [40000000, fcffffffff] [ 0.170000] bus: 00 index 2 mmio: [a0000, bffff] [ 0.170000] ACPI: bus type pci registered [ 0.170000] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127 [ 0.170000] PCI: MCFG area at f0000000 reserved in E820 [ 0.170000] PCI: Using MMCONFIG at f0000000 - f7ffffff [ 0.170000] PCI: Using configuration type 1 for base access [ 0.170000] bio: create slab at 0 [ 0.170000] ACPI: EC: Look up EC in DSDT [ 0.171696] ACPI: Interpreter enabled [ 0.171700] ACPI: (supports S0 S1 S4 S5) [ 0.171720] ACPI: Using IOAPIC for interrupt routing [ 0.178331] ACPI: No dock devices found. [ 0.178429] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.178621] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.178658] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f] [ 0.178662] pci 0000:00:01.1: reg 24 io port: [0x1c80-0x1cbf] [ 0.178681] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.178686] pci 0000:00:01.1: PME# disabled [ 0.178734] pci 0000:00:02.0: reg 10 32bit mmio: [0xfd004000-0xfd004fff] [ 0.178752] pci 0000:00:02.0: supports D1 D2 [ 0.178754] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.178757] pci 0000:00:02.0: PME# disabled [ 0.178775] pci 0000:00:02.1: reg 10 32bit mmio: [0xfd005000-0xfd0050ff] [ 0.178794] pci 0000:00:02.1: supports D1 D2 [ 0.178795] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.178798] pci 0000:00:02.1: PME# disabled [ 0.178823] pci 0000:00:04.0: reg 20 io port: [0xf000-0xf00f] [ 0.178850] pci 0000:00:05.0: reg 10 io port: [0x9f0-0x9f7] [ 0.178853] pci 0000:00:05.0: reg 14 io port: [0xbf0-0xbf3] [ 0.178857] pci 0000:00:05.0: reg 18 io port: [0x970-0x977] [ 0.178860] pci 0000:00:05.0: reg 1c io port: [0xb70-0xb73] [ 0.178863] pci 0000:00:05.0: reg 20 io port: [0xc400-0xc40f] [ 0.178867] pci 0000:00:05.0: reg 24 32bit mmio: [0xfd009000-0xfd009fff] [ 0.178896] pci 0000:00:05.1: reg 10 io port: [0x9e0-0x9e7] [ 0.178900] pci 0000:00:05.1: reg 14 io port: [0xbe0-0xbe3] [ 0.178903] pci 0000:00:05.1: reg 18 io port: [0x960-0x967] [ 0.178906] pci 0000:00:05.1: reg 1c io port: [0xb60-0xb63] [ 0.178909] pci 0000:00:05.1: reg 20 io port: [0xd800-0xd80f] [ 0.178913] pci 0000:00:05.1: reg 24 32bit mmio: [0xfd00a000-0xfd00afff] [ 0.178974] pci 0000:00:06.1: reg 10 32bit mmio: [0xfd000000-0xfd003fff] [ 0.178996] pci 0000:00:06.1: PME# supported from D3hot D3cold [ 0.178999] pci 0000:00:06.1: PME# disabled [ 0.179031] pci 0000:00:08.0: reg 10 32bit mmio: [0xfd006000-0xfd006fff] [ 0.179035] pci 0000:00:08.0: reg 14 io port: [0xe000-0xe007] [ 0.179038] pci 0000:00:08.0: reg 18 32bit mmio: [0xfd007000-0xfd0070ff] [ 0.179041] pci 0000:00:08.0: reg 1c 32bit mmio: [0xfd008000-0xfd00800f] [ 0.179061] pci 0000:00:08.0: supports D1 D2 [ 0.179062] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.179066] pci 0000:00:08.0: PME# disabled [ 0.179105] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.179108] pci 0000:00:0f.0: PME# disabled [ 0.179207] pci 0000:01:07.0: reg 10 io port: [0xa000-0xa0ff] [ 0.179212] pci 0000:01:07.0: reg 14 32bit mmio: [0xfc005000-0xfc0050ff] [ 0.179226] pci 0000:01:07.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.179238] pci 0000:01:07.0: supports D1 D2 [ 0.179239] pci 0000:01:07.0: PME# supported from D1 D2 D3hot [ 0.179242] pci 0000:01:07.0: PME# disabled [ 0.179268] pci 0000:01:0a.0: reg 10 32bit mmio: [0xfc004000-0xfc0047ff] [ 0.179272] pci 0000:01:0a.0: reg 14 32bit mmio: [0xfc000000-0xfc003fff] [ 0.179297] pci 0000:01:0a.0: supports D1 D2 [ 0.179299] pci 0000:01:0a.0: PME# supported from D0 D1 D2 D3hot [ 0.179302] pci 0000:01:0a.0: PME# disabled [ 0.179321] pci 0000:00:06.0: transparent bridge [ 0.179323] pci 0000:00:06.0: bridge io port: [0xa000-0xafff] [ 0.179326] pci 0000:00:06.0: bridge 32bit mmio: [0xfb000000-0xfcffffff] [ 0.179349] pci 0000:02:00.0: reg 10 32bit mmio: [0xf8000000-0xf8ffffff] [ 0.179356] pci 0000:02:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.179362] pci 0000:02:00.0: reg 1c 64bit mmio: [0xf9000000-0xf9ffffff] [ 0.179368] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.179412] pci 0000:00:0f.0: bridge 32bit mmio: [0xf8000000-0xfaffffff] [ 0.179416] pci 0000:00:0f.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.179424] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.179652] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.221471] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.221589] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.221710] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 *10 11 14 15) [ 0.221831] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15) [ 0.221955] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.222075] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 *15) [ 0.222192] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.222310] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.222428] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.222548] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 *15) [ 0.222668] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15) [ 0.222788] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 0.222906] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.223026] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15) [ 0.223146] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15) [ 0.223269] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.223389] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 11 14 *15) [ 0.223513] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15) [ 0.223687] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.223848] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.224002] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 0.224155] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 [ 0.224307] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 0.224461] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 [ 0.224614] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 0.224767] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.224921] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 0.225075] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.225229] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 0.225384] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.225538] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.225692] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 0.225847] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.226001] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.226156] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.226310] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.226422] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.226424] vgaarb: loaded [ 0.226536] SCSI subsystem initialized [ 0.226616] libata version 3.00 loaded. [ 0.226679] usbcore: registered new interface driver usbfs [ 0.226689] usbcore: registered new interface driver hub [ 0.226715] usbcore: registered new device driver usb [ 0.226821] ACPI: WMI: Mapper loaded [ 0.226823] PCI: Using ACPI for IRQ routing [ 0.226952] NetLabel: Initializing [ 0.226953] NetLabel: domain hash size = 128 [ 0.226954] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.226968] NetLabel: unlabeled traffic allowed by default [ 0.228600] AppArmor: AppArmor Filesystem Enabled [ 0.228624] pnp: PnP ACPI init [ 0.228642] ACPI: bus type pnp registered [ 0.232068] pnp: PnP ACPI: found 12 devices [ 0.232070] ACPI: ACPI bus type pnp unregistered [ 0.232082] system 00:01: ioport range 0x1000-0x107f has been reserved [ 0.232085] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 0.232087] system 00:01: ioport range 0x1400-0x147f has been reserved [ 0.232090] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 0.232092] system 00:01: ioport range 0x1800-0x187f has been reserved [ 0.232094] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 0.232097] system 00:01: iomem range 0xd0000000-0xdfffffff has been reserved [ 0.232102] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.232105] system 00:02: ioport range 0x800-0x87f has been reserved [ 0.232107] system 00:02: ioport range 0x295-0x314 has been reserved [ 0.232109] system 00:02: ioport range 0x290-0x294 has been reserved [ 0.232115] system 00:0a: iomem range 0xf0000000-0xf7ffffff has been reserved [ 0.232119] system 00:0b: iomem range 0xd0000-0xd3fff has been reserved [ 0.232122] system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved [ 0.232124] system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved [ 0.232126] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved [ 0.232129] system 00:0b: iomem range 0x3fff0000-0x3fffffff could not be reserved [ 0.232132] system 00:0b: iomem range 0xffff0000-0xffffffff has been reserved [ 0.232134] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 0.232137] system 00:0b: iomem range 0x100000-0x3ffeffff could not be reserved [ 0.232139] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.232142] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.236807] Switching to clocksource acpi_pm [ 0.236920] pci 0000:00:06.0: PCI bridge, secondary bus 0000:01 [ 0.236922] pci 0000:00:06.0: IO window: 0xa000-0xafff [ 0.236925] pci 0000:00:06.0: MEM window: 0xfb000000-0xfcffffff [ 0.236928] pci 0000:00:06.0: PREFETCH window: 0x40000000-0x400fffff [ 0.236932] pci 0000:00:0f.0: PCI bridge, secondary bus 0000:02 [ 0.236933] pci 0000:00:0f.0: IO window: disabled [ 0.236936] pci 0000:00:0f.0: MEM window: 0xf8000000-0xfaffffff [ 0.236938] pci 0000:00:0f.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.236946] pci 0000:00:06.0: setting latency timer to 64 [ 0.236951] pci 0000:00:0f.0: setting latency timer to 64 [ 0.236955] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.236957] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.236959] pci_bus 0000:01: resource 0 io: [0xa000-0xafff] [ 0.236961] pci_bus 0000:01: resource 1 mem: [0xfb000000-0xfcffffff] [ 0.236963] pci_bus 0000:01: resource 2 pref mem [0x40000000-0x400fffff] [ 0.236965] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.236968] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.236970] pci_bus 0000:02: resource 1 mem: [0xf8000000-0xfaffffff] [ 0.236972] pci_bus 0000:02: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.237009] NET: Registered protocol family 2 [ 0.237112] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.237650] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.239241] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.239989] TCP: Hash tables configured (established 131072 bind 65536) [ 0.239989] TCP reno registered [ 0.239989] NET: Registered protocol family 1 [ 0.260087] pci 0000:00:05.0: Enabling HT MSI Mapping [ 0.260132] pci 0000:00:05.1: Enabling HT MSI Mapping [ 0.260176] pci 0000:00:06.0: Enabling HT MSI Mapping [ 0.260223] pci 0000:00:06.1: Enabling HT MSI Mapping [ 0.260278] pci 0000:00:08.0: Enabling HT MSI Mapping [ 0.260333] pci 0000:00:0f.0: Enabling HT MSI Mapping [ 0.260350] pci 0000:02:00.0: Boot video device [ 0.260637] Scanning for low memory corruption every 60 seconds [ 0.260776] audit: initializing netlink socket (disabled) [ 0.260787] type=2000 audit(1284207710.260:1): initialized [ 0.268538] Trying to unpack rootfs image as initramfs... [ 0.280385] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.281599] VFS: Disk quotas dquot_6.5.2 [ 0.281649] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.282192] fuse init (API version 7.13) [ 0.282259] msgmni has been set to 1981 [ 0.290375] alg: No test for stdrng (krng) [ 0.290471] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.290474] io scheduler noop registered [ 0.290475] io scheduler anticipatory registered [ 0.290477] io scheduler deadline registered [ 0.290510] io scheduler cfq registered (default) [ 0.290645] alloc irq_desc for 24 on node 0 [ 0.290647] alloc kstat_irqs on node 0 [ 0.290655] pcieport 0000:00:0f.0: irq 24 for MSI/MSI-X [ 0.290660] pcieport 0000:00:0f.0: setting latency timer to 64 [ 0.290718] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.290742] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.290830] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.290834] ACPI: Power Button [PWRB] [ 0.290885] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.290887] ACPI: Power Button [PWRF] [ 0.291276] processor LNXCPU:00: registered as cooling_device0 [ 0.295320] Linux agpgart interface v0.103 [ 0.295353] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.295456] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.295696] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.296575] brd: module loaded [ 0.296965] loop: module loaded [ 0.297052] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.300120] pata_acpi 0000:00:04.0: setting latency timer to 64 [ 0.300530] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 0.300535] alloc irq_desc for 23 on node 0 [ 0.300537] alloc kstat_irqs on node 0 [ 0.300545] pata_acpi 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.300576] pata_acpi 0000:00:05.0: setting latency timer to 64 [ 0.300582] pata_acpi 0000:00:05.0: PCI INT A disabled [ 0.310510] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 [ 0.310516] alloc irq_desc for 22 on node 0 [ 0.310518] alloc kstat_irqs on node 0 [ 0.310526] pata_acpi 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 0.310567] pata_acpi 0000:00:05.1: setting latency timer to 64 [ 0.310575] pata_acpi 0000:00:05.1: PCI INT B disabled [ 0.310988] Fixed MDIO Bus: probed [ 0.311022] PPP generic driver version 2.4.2 [ 0.311076] tun: Universal TUN/TAP device driver, 1.6 [ 0.311077] tun: (C) 1999-2004 Max Krasnyansky [ 0.311161] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.311486] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 [ 0.311489] alloc irq_desc for 21 on node 0 [ 0.311491] alloc kstat_irqs on node 0 [ 0.311495] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21 [ 0.311511] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.311513] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.311543] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.311571] ehci_hcd 0000:00:02.1: debug port 1 [ 0.311577] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.311597] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfd005000 [ 0.330126] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.330259] usb usb1: configuration #1 chosen from 1 choice [ 0.330290] hub 1-0:1.0: USB hub found [ 0.330301] hub 1-0:1.0: 10 ports detected [ 0.330386] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.340449] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 [ 0.340455] alloc irq_desc for 20 on node 0 [ 0.340457] alloc kstat_irqs on node 0 [ 0.340467] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20 [ 0.340488] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.340490] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.340570] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.340610] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfd004000 [ 0.402307] usb usb2: configuration #1 chosen from 1 choice [ 0.402340] hub 2-0:1.0: USB hub found [ 0.402352] hub 2-0:1.0: 10 ports detected [ 0.402431] uhci_hcd: USB Universal Host Controller Interface driver [ 0.402513] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.402515] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.402647] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.402717] mice: PS/2 mouse device common for all mice [ 0.402810] rtc_cmos 00:04: RTC can wake from S4 [ 0.402852] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.402878] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.402995] device-mapper: uevent: version 1.0.3 [ 0.405699] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.407260] device-mapper: multipath: version 1.1.0 loaded [ 0.407264] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.412620] cpuidle: using governor ladder [ 0.412624] cpuidle: using governor menu [ 0.412990] TCP cubic registered [ 0.413116] NET: Registered protocol family 10 [ 0.413544] lo: Disabled Privacy Extensions [ 0.413804] NET: Registered protocol family 17 [ 0.413835] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors (1 cpu cores) (version 2.20.00) [ 0.413889] powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x8 [ 0.413891] powernow-k8: 1 : fid 0xe (2200 MHz), vid 0xa [ 0.413892] powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xc [ 0.413894] powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xe [ 0.413896] powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12 [ 0.414016] PM: Resume from disk failed. [ 0.414029] registered taskstats version 1 [ 0.414288] Magic number: 10:937:379 [ 0.414384] rtc_cmos 00:04: setting system clock to 2010-09-11 12:21:50 UTC (1284207710) [ 0.414387] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.414388] EDD information not available. [ 0.420819] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.471957] Freeing initrd memory: 8457k freed [ 0.477497] Freeing unused kernel memory: 880k freed [ 0.478090] Write protecting the kernel read-only data: 7696k [ 0.497953] udev: starting version 151 [ 0.688870] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 0.689224] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 [ 0.689229] forcedeth 0000:00:08.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23 [ 0.689234] forcedeth 0000:00:08.0: setting latency timer to 64 [ 0.689293] nv_probe: set workaround bit for reversed mac addr [ 0.702303] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.702646] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 0.702651] alloc irq_desc for 19 on node 0 [ 0.702653] alloc kstat_irqs on node 0 [ 0.702660] r8169 0000:01:07.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 0.702687] r8169 0000:01:07.0: no PCI Express capability [ 0.703277] eth0: RTL8169sb/8110sb at 0xffffc90008568000, 00:e0:4c:69:ff:ec, XID 10000000 IRQ 19 [ 0.707844] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 0.707850] alloc irq_desc for 18 on node 0 [ 0.707852] alloc kstat_irqs on node 0 [ 0.707859] ohci1394 0000:01:0a.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 0.760050] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fc004000-fc0047ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 1.050019] usb 2-9: new full speed USB device using ohci_hcd and address 2 [ 1.210773] forcedeth 0000:00:08.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:16:e6:d4:66:9e [ 1.210776] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 [ 1.211230] sata_nv 0000:00:05.0: version 3.5 [ 1.211244] sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 1.211246] sata_nv 0000:00:05.0: Using SWNCQ mode [ 1.211299] sata_nv 0000:00:05.0: setting latency timer to 64 [ 1.211440] scsi0 : sata_nv [ 1.211628] scsi1 : sata_nv [ 1.211808] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xc400 irq 23 [ 1.211811] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xc408 irq 23 [ 1.211941] pata_amd 0000:00:04.0: version 0.4.1 [ 1.211979] pata_amd 0000:00:04.0: setting latency timer to 64 [ 1.212037] scsi2 : pata_amd [ 1.212137] scsi3 : pata_amd [ 1.212767] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 1.212769] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 1.213106] sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 1.213108] sata_nv 0000:00:05.1: Using SWNCQ mode [ 1.213162] sata_nv 0000:00:05.1: setting latency timer to 64 [ 1.213302] scsi4 : sata_nv [ 1.213436] scsi5 : sata_nv [ 1.213617] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xd800 irq 22 [ 1.213620] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xd808 irq 22 [ 1.282275] usb 2-9: configuration #1 chosen from 1 choice [ 1.410247] ata3.00: ATAPI: HL-DT-STDVD-ROM GDR8163B, 0F21, max UDMA/33 [ 1.410274] ata3.01: ATAPI: _NEC DVD_RW ND-2510A, 2.96, max UDMA/33 [ 1.410295] ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c00000) ACPI=0x701f (60:60:0x1f) [ 1.410300] ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c00000) ACPI=0x701f (60:60:0x1f) [ 1.450210] ata3.00: configured for UDMA/33 [ 1.490254] ata3.01: configured for UDMA/33 [ 1.550327] ata5: SATA link down (SStatus 0 SControl 300) [ 1.620025] usb 2-10: new low speed USB device using ohci_hcd and address 3 [ 1.710040] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.750103] ata1.00: HPA unlocked: 312579695 -> 312581808, native 312581808 [ 1.750108] ata1.00: ATA-7: SAMSUNG HD160HJ, BF100-08, max UDMA7 [ 1.750110] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.770212] ata1.00: configured for UDMA/133 [ 1.770313] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD160HJ BF10 PQ: 0 ANSI: 5 [ 1.770471] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.771422] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.771461] sd 0:0:0:0: [sda] Write Protect is off [ 1.771463] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.771484] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.771610] sda: sda1 sda2 sda3 [ 1.778018] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.847011] usb 2-10: configuration #1 chosen from 1 choice [ 2.080137] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001a4d0000c14233] [ 2.110356] ata2: SATA link down (SStatus 0 SControl 300) [ 2.118747] scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8163B 0F21 PQ: 0 ANSI: 5 [ 2.126210] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 2.126214] Uniform CD-ROM driver Revision: 3.20 [ 2.126344] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 2.126506] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 2.127727] scsi 2:0:1:0: CD-ROM _NEC DVD_RW ND-2510A 2.96 PQ: 0 ANSI: 5 [ 2.130088] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 2.130221] sr 2:0:1:0: Attached scsi CD-ROM sr1 [ 2.130280] sr 2:0:1:0: Attached scsi generic sg2 type 5 [ 2.130547] ata4: port disabled. ignoring. [ 2.249707] EXT4-fs (loop0): mounted filesystem with ordered data mode [ 2.470383] ata6: SATA link down (SStatus 0 SControl 300) [ 3.945019] udev: starting version 151 [ 4.727075] parport_pc 00:08: reported by Plug and Play ACPI [ 4.727121] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 4.855722] usbcore: registered new interface driver hiddev [ 4.862574] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-10/2-10:1.0/input/input4 [ 4.862856] generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:02.0-10/input0 [ 4.862907] usbcore: registered new interface driver usbhid [ 4.863499] usbhid: v2.6:USB HID core driver [ 4.870111] lp0: using parport0 (interrupt-driven). [ 4.873091] ppdev: user-space parallel port driver [ 4.931309] Linux video capture interface: v2.00 [ 4.957418] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 5.055693] EDAC MC: Ver: 2.1.0 Jul 28 2010 [ 5.070226] i2c i2c-0: nForce2 SMBus adapter at 0x1c00 [ 5.070299] i2c i2c-1: nForce2 SMBus adapter at 0x1c80 [ 5.083468] gspca: main v2.7.0 registered [ 5.091940] EDAC amd64_edac: Ver: 3.2.0 Jul 28 2010 [ 5.092195] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 5.092200] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 5.092201] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 5.092203] (Note that use of the override may cause unknown side effects.) [ 5.092221] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 5.210175] STV06xx: Probing for a stv06xx device [ 5.210181] gspca: probing 046d:08f0 [ 5.210185] STV06xx: Configuring camera [ 5.210187] STV06xx: st6422 sensor detected [ 5.210189] STV06xx: Initializing camera [ 5.281973] [drm] Initialized drm 1.1.0 20060810 [ 5.421056] quickcam_messenger: v0.01:Logitech Quickcam Messenger USB [ 5.561312] gspca: probe ok [ 5.561910] STV06xx: Probing for a stv06xx device [ 5.561913] gspca: probing 046d:08f0 [ 5.561935] STV06xx: Probing for a stv06xx device [ 5.561936] gspca: probing 046d:08f0 [ 5.561967] usbcore: registered new interface driver STV06xx [ 5.561969] STV06xx: registered [ 5.561991] usbcore: registered new interface driver QCM [ 5.564100] type=1505 audit(1284200515.645:2): operation="profile_load" pid=631 name="/sbin/dhclient3" [ 5.564343] type=1505 audit(1284200515.645:3): operation="profile_load" pid=631 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 5.564475] type=1505 audit(1284200515.645:4): operation="profile_load" pid=631 name="/usr/lib/connman/scripts/dhclient-script" [ 5.666192] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16 [ 5.666199] alloc irq_desc for 16 on node 0 [ 5.666201] alloc kstat_irqs on node 0 [ 5.666210] nouveau 0000:02:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16 [ 5.666214] nouveau 0000:02:00.0: setting latency timer to 64 [ 5.672058] [drm] nouveau 0000:02:00.0: Detected an NV40 generation card (0x046f00a3) [ 5.672440] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PROM [ 5.874810] [drm] nouveau 0000:02:00.0: ... appears to be valid [ 5.874814] [drm] nouveau 0000:02:00.0: BIT BIOS found [ 5.874816] [drm] nouveau 0000:02:00.0: Bios version 05.72.22.76 [ 5.874820] [drm] nouveau 0000:02:00.0: TMDS table script pointers not stubbed [ 5.874822] [drm] nouveau 0000:02:00.0: BIT table 'd' not found [ 5.874824] [drm] nouveau 0000:02:00.0: Found Display Configuration Block version 3.0 [ 5.874828] [drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x30 5 10 2 [ 5.874831] [drm] nouveau 0000:02:00.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff [ 5.874833] [drm] nouveau 0000:02:00.0: 1: 0x00001130: type 0x30 idx 1 tag 0x07 [ 5.874836] [drm] nouveau 0000:02:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff [ 5.874838] [drm] nouveau 0000:02:00.0: 3: 0x00000211: type 0x11 idx 2 tag 0xff [ 5.874841] [drm] nouveau 0000:02:00.0: 4: 0x00000213: type 0x13 idx 2 tag 0xff [ 5.874843] [drm] nouveau 0000:02:00.0: Raw DCB entry 0: 01000300 00000028 [ 5.874847] [drm] nouveau 0000:02:00.0: Raw DCB entry 1: 02011310 00000028 [ 5.874849] [drm] nouveau 0000:02:00.0: Raw DCB entry 2: 01011312 00000020 [ 5.874851] [drm] nouveau 0000:02:00.0: Raw DCB entry 3: 020223f1 00c0c083 [ 5.874858] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xD272 [ 5.874910] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xD5A1 [ 6.050253] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xDB6A [ 6.050278] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xDCE5 [ 6.070210] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xDF3E [ 6.086322] [TTM] Zone kernel: Available graphics memory: 511912 kiB. [ 6.086334] [drm] nouveau 0000:02:00.0: 256 MiB VRAM [ 6.087703] [drm] nouveau 0000:02:00.0: 64 MiB GART (aperture) [ 6.087970] [drm] nouveau 0000:02:00.0: Allocating FIFO number 0 [ 6.088439] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 0 [ 6.088446] [drm] nouveau 0000:02:00.0: Initial CRTC_OWNER is 0 [ 6.088453] [drm] nouveau 0000:02:00.0: Saving VGA fonts [ 6.150952] [drm] nouveau 0000:02:00.0: Detected a VGA connector [ 6.151215] [drm] nouveau 0000:02:00.0: Detected a DVI-I connector [ 6.151355] [drm] nouveau 0000:02:00.0: Detected a TV connector [ 6.153268] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 6.153272] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on vga encoder (output 1) [ 6.153274] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on tmds encoder (output 2) [ 6.153277] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on TV encoder (output 3) [ 6.420180] [drm] nouveau 0000:02:00.0: allocated 1024x768 fb: 0x49000, bo ffff88003c62dc00 [ 6.420276] fb0: nouveaufb frame buffer device [ 6.420278] registered panic notifier [ 6.420282] [drm] Initialized nouveau 0.0.15 20090420 for 0000:02:00.0 on minor 0 [ 6.543548] usbcore: registered new interface driver snd-usb-audio [ 6.568695] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22 [ 6.568702] HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22 [ 6.568706] hda_intel: Disable MSI for Nvidia chipset [ 6.568735] HDA Intel 0000:00:06.1: setting latency timer to 64 [ 6.637134] vga16fb: initializing [ 6.637139] vga16fb: mapped to 0xffff8800000a0000 [ 6.637145] vga16fb: not registering due to another framebuffer present [ 7.262316] [drm] nouveau 0000:02:00.0: Setting dpms mode 0 on vga encoder (output 0) [ 7.262321] [drm] nouveau 0000:02:00.0: Output VGA-1 is running on CRTC 0 using output A [ 7.265827] Console: switching to colour frame buffer device 128x48 [ 7.960118] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:06.1/input/input5 [ 10.620777] Adding 261112k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:261112k [ 11.581262] type=1505 audit(1284200521.665:5): operation="profile_load" pid=1126 name="/usr/share/gdm/guest-session/Xsession" [ 11.582972] type=1505 audit(1284200521.665:6): operation="profile_replace" pid=1127 name="/sbin/dhclient3" [ 11.583218] type=1505 audit(1284200521.665:7): operation="profile_replace" pid=1127 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 11.583357] type=1505 audit(1284200521.665:8): operation="profile_replace" pid=1127 name="/usr/lib/connman/scripts/dhclient-script" [ 11.763635] type=1505 audit(1284200521.845:9): operation="profile_load" pid=1128 name="/usr/bin/evince" [ 11.766861] type=1505 audit(1284200521.845:10): operation="profile_load" pid=1128 name="/usr/bin/evince-previewer" [ 11.768834] type=1505 audit(1284200521.845:11): operation="profile_load" pid=1128 name="/usr/bin/evince-thumbnailer" [ 11.909511] type=1505 audit(1284200521.985:12): operation="profile_load" pid=1130 name="/usr/lib/cups/backend/cups-pdf" [ 11.909816] type=1505 audit(1284200521.985:13): operation="profile_load" pid=1130 name="/usr/sbin/cupsd" [ 11.952346] type=1505 audit(1284200522.035:14): operation="profile_load" pid=1131 name="/usr/sbin/tcpdump" [ 13.852808] r8169: eth0: link up [ 13.856940] alloc irq_desc for 25 on node 0 [ 13.856944] alloc kstat_irqs on node 0 [ 13.856953] forcedeth 0000:00:08.0: irq 25 for MSI/MSI-X [ 13.857142] eth1: no link during initialization. [ 13.857622] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 17.253744] [drm] nouveau 0000:02:00.0: Allocating FIFO number 1 [ 17.254209] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 76.660062] Clocksource tsc unstable (delta = -133214222 ns)