[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #39-Ubuntu SMP Wed Jul 28 06:07:29 UTC 2010 (Ubuntu 2.6.32-24.39-generic 2.6.32.15+drm33.5) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable) [ 0.000000] BIOS-e820: 00000000bfed0000 - 00000000bfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0xbfed0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 1 base 000000000 mask F00000000 write-back [ 0.000000] 2 base 100000000 mask FC0000000 write-back [ 0.000000] 3 base 0BFF00000 mask FFFF00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000ce000 - 00000000000d0000 (reserved) [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bfed0000 (usable) [ 0.000000] modified: 00000000bfed0000 - 00000000bfee3000 (ACPI NVS) [ 0.000000] modified: 00000000bfee3000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 37857000 - 37fef1e1 [ 0.000000] Allocated new RAMDISK: 008e0000 - 010781e1 [ 0.000000] Move RAMDISK from 0000000037857000 - 0000000037fef1e0 to 008e0000 - 010781e0 [ 0.000000] ACPI: RSDP 000f7600 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT bfed675e 00094 (v01 DELL M08 06040000 LTP 00000000) [ 0.000000] ACPI: FACP bfedeb60 000F4 (v03 TOSCPL CRESTLNE 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT bfed7c3b 06EB1 (v02 TOSCPL CRESTLNE 06040000 INTL 20060608) [ 0.000000] ACPI: FACS bfee2fc0 00040 [ 0.000000] ACPI: APIC bfedec54 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: HPET bfedecbc 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG bfedecf4 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: TCPA bfeded30 00032 (v01 Intel CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: TMOR bfeded62 00026 (v01 PTLTD 06040000 PTL 00000003) [ 0.000000] ACPI: OSFR bfeded88 00072 (v01 TOSHIB A+2nd ID 06040000 TASM 04010000) [ 0.000000] ACPI: APIC bfededfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT bfedee62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC bfedee8a 00176 (v01 DELL M08 06040000 LTP 00000000) [ 0.000000] ACPI: SSDT bfed798e 002AD (v01 SataRe SataAhci 00001000 INTL 20061109) [ 0.000000] ACPI: SSDT bfed6d7e 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT bfed6cd8 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT bfed67f2 004E6 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2182MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008dbeb8] TEXT DATA BSS ==> [0000100000 - 00008dbeb8] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00008dc000 - 00008df10c] BRK ==> [00008dc000 - 00008df10c] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008e0000 - 00010781e1] NEW RAMDISK ==> [00008e0000 - 00010781e1] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00f7680] f7680 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000bfed0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bfed0 [ 0.000000] On node 0 totalpages: 786027 [ 0.000000] free_area_init_node: node 0, pgdat c0798780, node_mem_map c107a000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4366 pages used for memmap [ 0.000000] HighMem zone: 554436 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000 [ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000 [ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36056 r0 d21288 u2097152 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779885 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=d796d707-a631-4849-ba52-15e613a48cd9 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 15722560 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000bfed0) [ 0.000000] Memory: 3086268k/3144512k available (4679k kernel code, 56780k reserved, 2116k data, 660k init, 2235208k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0848000 ( 660 kB) [ 0.000000] .data : 0xc0591d43 - 0xc07a2e88 (2116 kB) [ 0.000000] .text : 0xc0100000 - 0xc0591d43 (4679 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2094.923 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.84 BogoMIPS (lpj=8379692) [ 0.004020] Security Framework initialized [ 0.004039] AppArmor: AppArmor initialized [ 0.004045] Mount-cache hash table entries: 512 [ 0.004159] Initializing cgroup subsys ns [ 0.004163] Initializing cgroup subsys cpuacct [ 0.004167] Initializing cgroup subsys memory [ 0.004174] Initializing cgroup subsys devices [ 0.004176] Initializing cgroup subsys freezer [ 0.004178] Initializing cgroup subsys net_cls [ 0.004195] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004198] CPU: L2 cache: 3072K [ 0.004201] CPU: Physical Processor ID: 0 [ 0.004202] CPU: Processor Core ID: 0 [ 0.004206] mce: CPU supports 6 MCE banks [ 0.004213] CPU0: Thermal monitoring handled by SMI [ 0.004217] using mwait in idle threads. [ 0.004223] Performance Events: Core2 events, Intel PMU driver. [ 0.004230] ... version: 2 [ 0.004232] ... bit width: 40 [ 0.004233] ... generic registers: 2 [ 0.004235] ... value mask: 000000ffffffffff [ 0.004237] ... max period: 000000007fffffff [ 0.004238] ... fixed-purpose events: 3 [ 0.004240] ... event mask: 0000000700000003 [ 0.004244] Checking 'hlt' instruction... OK. [ 0.022576] ACPI: Core revision 20090903 [ 0.036009] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.036013] ftrace: allocating 21780 entries in 43 pages [ 0.040050] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.040397] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.082062] CPU0: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz stepping 06 [ 0.084001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 3072K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.008000] CPU1: Thermal monitoring handled by SMI [ 0.168090] CPU1: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz stepping 06 [ 0.168102] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.172018] Brought up 2 CPUs [ 0.172020] Total of 2 processors activated (8379.30 BogoMIPS). [ 0.172652] CPU0 attaching sched-domain: [ 0.172655] domain 0: span 0-1 level MC [ 0.172657] groups: 0 1 [ 0.172663] CPU1 attaching sched-domain: [ 0.172665] domain 0: span 0-1 level MC [ 0.172667] groups: 1 0 [ 0.172757] devtmpfs: initialized [ 0.172757] regulator: core version 0.5 [ 0.172757] Time: 10:04:52 Date: 09/10/10 [ 0.172757] NET: Registered protocol family 16 [ 0.172757] Trying to unpack rootfs image as initramfs... [ 0.172757] EISA bus registered [ 0.172757] ACPI: bus type pci registered [ 0.172757] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.172757] PCI: MCFG area at e0000000 reserved in E820 [ 0.172757] PCI: Using MMCONFIG for extended config space [ 0.172757] PCI: Using configuration type 1 for base access [ 0.176093] bio: create slab at 0 [ 0.177085] ACPI: EC: Look up EC in DSDT [ 0.184054] ACPI: BIOS _OSI(Linux) query ignored [ 0.185027] ACPI: Interpreter enabled [ 0.185037] ACPI: (supports S0 S3 S4 S5) [ 0.185057] ACPI: Using IOAPIC for interrupt routing [ 0.256738] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.257109] ACPI: No dock devices found. [ 0.257676] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.257793] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.257796] pci 0000:00:01.0: PME# disabled [ 0.257889] pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f] [ 0.257959] pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f] [ 0.258037] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf8304800-0xf8304bff] [ 0.258105] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.258111] pci 0000:00:1a.7: PME# disabled [ 0.258169] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf8300000-0xf8303fff] [ 0.258235] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.258240] pci 0000:00:1b.0: PME# disabled [ 0.258340] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.258344] pci 0000:00:1c.0: PME# disabled [ 0.258447] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.258451] pci 0000:00:1c.1: PME# disabled [ 0.258556] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.258561] pci 0000:00:1c.3: PME# disabled [ 0.258665] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.258669] pci 0000:00:1c.4: PME# disabled [ 0.258739] pci 0000:00:1d.0: reg 20 io port: [0x1840-0x185f] [ 0.258808] pci 0000:00:1d.1: reg 20 io port: [0x1860-0x187f] [ 0.258879] pci 0000:00:1d.2: reg 20 io port: [0x1880-0x189f] [ 0.258956] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8304c00-0xf8304fff] [ 0.259026] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.259031] pci 0000:00:1d.7: PME# disabled [ 0.259208] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.259212] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.259217] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f) [ 0.259221] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 007f) [ 0.259278] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.259287] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.259295] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.259304] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.259312] pci 0000:00:1f.1: reg 20 io port: [0x18a0-0x18af] [ 0.259391] pci 0000:00:1f.2: reg 10 io port: [0x18d8-0x18df] [ 0.259399] pci 0000:00:1f.2: reg 14 io port: [0x18cc-0x18cf] [ 0.259407] pci 0000:00:1f.2: reg 18 io port: [0x18d0-0x18d7] [ 0.259415] pci 0000:00:1f.2: reg 1c io port: [0x18c8-0x18cb] [ 0.259423] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff] [ 0.259431] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf8304000-0xf83047ff] [ 0.259477] pci 0000:00:1f.2: PME# supported from D3hot [ 0.259481] pci 0000:00:1f.2: PME# disabled [ 0.259516] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff] [ 0.259543] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f] [ 0.259625] pci 0000:01:00.0: reg 10 32bit mmio: [0xca000000-0xcaffffff] [ 0.259642] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.259659] pci 0000:01:00.0: reg 1c 64bit mmio: [0xc8000000-0xc9ffffff] [ 0.259668] pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f] [ 0.259678] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.259789] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff] [ 0.259792] pci 0000:00:01.0: bridge 32bit mmio: [0xc8000000-0xcaffffff] [ 0.259797] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.259860] pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff] [ 0.259866] pci 0000:00:1c.0: bridge 32bit mmio: [0xc0000000-0xc3ffffff] [ 0.259875] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xcc000000-0xcdffffff] [ 0.259939] pci 0000:00:1c.1: bridge io port: [0x4000-0x4fff] [ 0.259944] pci 0000:00:1c.1: bridge 32bit mmio: [0xf0000000-0xf3ffffff] [ 0.259952] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xfa000000-0xfbffffff] [ 0.260136] pci 0000:06:00.0: reg 10 32bit mmio: [0xf4000000-0xf4000fff] [ 0.260377] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.260389] pci 0000:06:00.0: PME# disabled [ 0.260507] pci 0000:00:1c.3: bridge io port: [0x5000-0x5fff] [ 0.260512] pci 0000:00:1c.3: bridge 32bit mmio: [0xf4000000-0xf7ffffff] [ 0.260520] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xfc000000-0xfdffffff] [ 0.260692] pci 0000:07:00.0: reg 10 io port: [0x6000-0x60ff] [ 0.260771] pci 0000:07:00.0: reg 18 64bit mmio pref: [0xf8410000-0xf8410fff] [ 0.260824] pci 0000:07:00.0: reg 20 64bit mmio pref: [0xf8400000-0xf840ffff] [ 0.260852] pci 0000:07:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.261009] pci 0000:07:00.0: supports D1 D2 [ 0.261011] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.261026] pci 0000:07:00.0: PME# disabled [ 0.261182] pci 0000:00:1c.4: bridge io port: [0x6000-0x6fff] [ 0.261193] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf8400000-0xf84fffff] [ 0.261249] pci 0000:08:05.0: reg 10 32bit mmio: [0xf8000000-0xf8000fff] [ 0.261257] pci 0000:08:05.0: reg 14 32bit mmio: [0xf8002000-0xf80027ff] [ 0.261314] pci 0000:08:05.0: supports D1 D2 [ 0.261316] pci 0000:08:05.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.261321] pci 0000:08:05.0: PME# disabled [ 0.261370] pci 0000:08:05.2: reg 10 32bit mmio: [0xf8002800-0xf80028ff] [ 0.261439] pci 0000:08:05.2: supports D1 D2 [ 0.261441] pci 0000:08:05.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.261447] pci 0000:08:05.2: PME# disabled [ 0.261496] pci 0000:08:05.3: reg 10 32bit mmio: [0xf8001000-0xf8001fff] [ 0.261565] pci 0000:08:05.3: supports D1 D2 [ 0.261567] pci 0000:08:05.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.261572] pci 0000:08:05.3: PME# disabled [ 0.261633] pci 0000:00:1e.0: transparent bridge [ 0.261641] pci 0000:00:1e.0: bridge 32bit mmio: [0xf8000000-0xf80fffff] [ 0.261684] pci_bus 0000:00: on NUMA node 0 [ 0.261688] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.261909] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 0.261992] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.262065] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.262141] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.262214] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.262317] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.272908] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 0.273008] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.273109] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.273206] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.273304] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.273402] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.273499] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.273597] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.273716] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.273721] vgaarb: loaded [ 0.273838] SCSI subsystem initialized [ 0.273936] libata version 3.00 loaded. [ 0.274005] usbcore: registered new interface driver usbfs [ 0.274019] usbcore: registered new interface driver hub [ 0.274046] usbcore: registered new device driver usb [ 0.274197] ACPI: WMI: Mapper loaded [ 0.274199] PCI: Using ACPI for IRQ routing [ 0.274458] NetLabel: Initializing [ 0.274460] NetLabel: domain hash size = 128 [ 0.274462] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.274475] NetLabel: unlabeled traffic allowed by default [ 0.274506] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.274511] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.280195] Switching to clocksource tsc [ 0.282030] AppArmor: AppArmor Filesystem Enabled [ 0.282042] pnp: PnP ACPI init [ 0.282054] ACPI: bus type pnp registered [ 0.307559] pnp: PnP ACPI: found 10 devices [ 0.307562] ACPI: ACPI bus type pnp unregistered [ 0.307566] PnPBIOS: Disabled by ACPI PNP [ 0.307581] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.307584] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.307587] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.307590] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.307592] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.307595] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.307598] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved [ 0.307600] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.307608] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.307615] system 00:06: ioport range 0x680-0x69f has been reserved [ 0.307618] system 00:06: ioport range 0x800-0x80f has been reserved [ 0.307621] system 00:06: ioport range 0x1000-0x107f has been reserved [ 0.307623] system 00:06: ioport range 0x1180-0x11bf has been reserved [ 0.307627] system 00:06: ioport range 0xfe00-0xfe00 has been reserved [ 0.307630] system 00:06: ioport range 0xff00-0xff7f has been reserved [ 0.342394] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff] [ 0.342398] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.342401] pci 0000:00:01.0: IO window: 0x2000-0x2fff [ 0.342405] pci 0000:00:01.0: MEM window: 0xc8000000-0xcaffffff [ 0.342409] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.342415] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.342418] pci 0000:00:1c.0: IO window: 0x3000-0x3fff [ 0.342425] pci 0000:00:1c.0: MEM window: 0xc0000000-0xc3ffffff [ 0.342430] pci 0000:00:1c.0: PREFETCH window: 0x000000cc000000-0x000000cdffffff [ 0.342438] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.342442] pci 0000:00:1c.1: IO window: 0x4000-0x4fff [ 0.342448] pci 0000:00:1c.1: MEM window: 0xf0000000-0xf3ffffff [ 0.342453] pci 0000:00:1c.1: PREFETCH window: 0x000000fa000000-0x000000fbffffff [ 0.342461] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06 [ 0.342464] pci 0000:00:1c.3: IO window: 0x5000-0x5fff [ 0.342471] pci 0000:00:1c.3: MEM window: 0xf4000000-0xf7ffffff [ 0.342476] pci 0000:00:1c.3: PREFETCH window: 0x000000fc000000-0x000000fdffffff [ 0.342484] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:07 [ 0.342488] pci 0000:00:1c.4: IO window: 0x6000-0x6fff [ 0.342494] pci 0000:00:1c.4: MEM window: 0xc4000000-0xc43fffff [ 0.342499] pci 0000:00:1c.4: PREFETCH window: 0x000000f8400000-0x000000f84fffff [ 0.342507] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08 [ 0.342509] pci 0000:00:1e.0: IO window: disabled [ 0.342515] pci 0000:00:1e.0: MEM window: 0xf8000000-0xf80fffff [ 0.342520] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.342539] alloc irq_desc for 16 on node -1 [ 0.342541] alloc kstat_irqs on node -1 [ 0.342548] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.342552] pci 0000:00:01.0: setting latency timer to 64 [ 0.342563] alloc irq_desc for 17 on node -1 [ 0.342564] alloc kstat_irqs on node -1 [ 0.342568] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.342573] pci 0000:00:1c.0: setting latency timer to 64 [ 0.342583] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.342588] pci 0000:00:1c.1: setting latency timer to 64 [ 0.342599] alloc irq_desc for 19 on node -1 [ 0.342601] alloc kstat_irqs on node -1 [ 0.342604] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.342609] pci 0000:00:1c.3: setting latency timer to 64 [ 0.342621] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.342626] pci 0000:00:1c.4: setting latency timer to 64 [ 0.342635] pci 0000:00:1e.0: setting latency timer to 64 [ 0.342639] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.342642] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.342644] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff] [ 0.342646] pci_bus 0000:01: resource 1 mem: [0xc8000000-0xcaffffff] [ 0.342649] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.342651] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff] [ 0.342654] pci_bus 0000:02: resource 1 mem: [0xc0000000-0xc3ffffff] [ 0.342656] pci_bus 0000:02: resource 2 pref mem [0xcc000000-0xcdffffff] [ 0.342659] pci_bus 0000:03: resource 0 io: [0x4000-0x4fff] [ 0.342661] pci_bus 0000:03: resource 1 mem: [0xf0000000-0xf3ffffff] [ 0.342664] pci_bus 0000:03: resource 2 pref mem [0xfa000000-0xfbffffff] [ 0.342666] pci_bus 0000:06: resource 0 io: [0x5000-0x5fff] [ 0.342668] pci_bus 0000:06: resource 1 mem: [0xf4000000-0xf7ffffff] [ 0.342671] pci_bus 0000:06: resource 2 pref mem [0xfc000000-0xfdffffff] [ 0.342673] pci_bus 0000:07: resource 0 io: [0x6000-0x6fff] [ 0.342675] pci_bus 0000:07: resource 1 mem: [0xc4000000-0xc43fffff] [ 0.342678] pci_bus 0000:07: resource 2 pref mem [0xf8400000-0xf84fffff] [ 0.342680] pci_bus 0000:08: resource 1 mem: [0xf8000000-0xf80fffff] [ 0.342683] pci_bus 0000:08: resource 3 io: [0x00-0xffff] [ 0.342685] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffff] [ 0.342724] NET: Registered protocol family 2 [ 0.342827] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.343149] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.343626] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.343842] TCP: Hash tables configured (established 131072 bind 65536) [ 0.343844] TCP reno registered [ 0.343924] NET: Registered protocol family 1 [ 0.344090] pci 0000:01:00.0: Boot video device [ 0.344122] Simple Boot Flag at 0x36 set to 0x1 [ 0.344282] cpufreq-nforce2: No nForce2 chipset. [ 0.344307] Scanning for low memory corruption every 60 seconds [ 0.344416] audit: initializing netlink socket (disabled) [ 0.344425] type=2000 audit(1284113091.343:1): initialized [ 0.354047] highmem bounce pool size: 64 pages [ 0.354052] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.355529] VFS: Disk quotas dquot_6.5.2 [ 0.355587] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.356127] fuse init (API version 7.13) [ 0.356208] msgmni has been set to 1664 [ 0.356410] alg: No test for stdrng (krng) [ 0.356463] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.356466] io scheduler noop registered [ 0.356468] io scheduler anticipatory registered [ 0.356470] io scheduler deadline registered [ 0.356507] io scheduler cfq registered (default) [ 0.356651] alloc irq_desc for 24 on node -1 [ 0.356653] alloc kstat_irqs on node -1 [ 0.356661] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.356668] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.356801] alloc irq_desc for 25 on node -1 [ 0.356803] alloc kstat_irqs on node -1 [ 0.356812] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.356823] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.356978] alloc irq_desc for 26 on node -1 [ 0.356980] alloc kstat_irqs on node -1 [ 0.356988] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X [ 0.356999] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.357157] alloc irq_desc for 27 on node -1 [ 0.357159] alloc kstat_irqs on node -1 [ 0.357168] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X [ 0.357179] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.357334] alloc irq_desc for 28 on node -1 [ 0.357335] alloc kstat_irqs on node -1 [ 0.357343] pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X [ 0.357355] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.357462] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.357614] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.361710] ACPI: AC Adapter [ACAD] (on-line) [ 0.361770] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.361813] ACPI: Lid Switch [LID0] [ 0.361857] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.361859] ACPI: Power Button [PWRB] [ 0.361899] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.361902] ACPI: Sleep Button [SLPB] [ 0.361955] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.361958] ACPI: Power Button [PWRF] [ 0.362630] ACPI: SSDT bfed764c 0027A (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.363163] ACPI: SSDT bfed6fdd 005EA (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.365266] Monitor-Mwait will be used to enter C-1 state [ 0.365294] Monitor-Mwait will be used to enter C-2 state [ 0.365317] Monitor-Mwait will be used to enter C-3 state [ 0.365323] Marking TSC unstable due to TSC halts in idle [ 0.365377] processor LNXCPU:00: registered as cooling_device0 [ 0.365720] ACPI: SSDT bfed78c6 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20061109) [ 0.366062] ACPI: SSDT bfed75c7 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20061109) [ 0.366567] Switching to clocksource hpet [ 0.367392] processor LNXCPU:01: registered as cooling_device1 [ 0.370006] Freeing initrd memory: 7776k freed [ 0.404461] isapnp: Scanning for PnP cards... [ 0.413668] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.414976] brd: module loaded [ 0.415420] loop: module loaded [ 0.415502] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.415599] ata_piix 0000:00:1f.1: version 2.13 [ 0.415614] alloc irq_desc for 18 on node -1 [ 0.415615] alloc kstat_irqs on node -1 [ 0.415622] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.415668] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.415748] scsi0 : ata_piix [ 0.415820] scsi1 : ata_piix [ 0.416409] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14 [ 0.416412] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15 [ 0.416733] Fixed MDIO Bus: probed [ 0.416765] PPP generic driver version 2.4.2 [ 0.416799] tun: Universal TUN/TAP device driver, 1.6 [ 0.416801] tun: (C) 1999-2004 Max Krasnyansky [ 0.416876] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.416897] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.416909] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.416912] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.416942] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.416975] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.420870] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.420975] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8304800 [ 0.436096] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.436236] usb usb1: configuration #1 chosen from 1 choice [ 0.436263] hub 1-0:1.0: USB hub found [ 0.436270] hub 1-0:1.0: 4 ports detected [ 0.436323] alloc irq_desc for 23 on node -1 [ 0.436325] alloc kstat_irqs on node -1 [ 0.436329] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.436340] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.436343] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.436374] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.436402] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.440281] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.440293] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8304c00 [ 0.456019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.456085] usb usb2: configuration #1 chosen from 1 choice [ 0.456109] hub 2-0:1.0: USB hub found [ 0.456116] hub 2-0:1.0: 6 ports detected [ 0.456174] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.456188] uhci_hcd: USB Universal Host Controller Interface driver [ 0.456207] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.456214] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.456217] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.456245] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.456281] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 [ 0.456367] usb usb3: configuration #1 chosen from 1 choice [ 0.456391] hub 3-0:1.0: USB hub found [ 0.456398] hub 3-0:1.0: 2 ports detected [ 0.456448] alloc irq_desc for 21 on node -1 [ 0.456450] alloc kstat_irqs on node -1 [ 0.456454] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.456460] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.456464] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.456494] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.456528] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 [ 0.456614] usb usb4: configuration #1 chosen from 1 choice [ 0.456641] hub 4-0:1.0: USB hub found [ 0.456652] hub 4-0:1.0: 2 ports detected [ 0.456697] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.456703] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.456706] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.456734] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 0.456760] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840 [ 0.456843] usb usb5: configuration #1 chosen from 1 choice [ 0.456869] hub 5-0:1.0: USB hub found [ 0.456875] hub 5-0:1.0: 2 ports detected [ 0.456919] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.456925] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.456929] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.456958] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 0.456993] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860 [ 0.457080] usb usb6: configuration #1 chosen from 1 choice [ 0.457104] hub 6-0:1.0: USB hub found [ 0.457110] hub 6-0:1.0: 2 ports detected [ 0.457155] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.457161] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.457164] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.457196] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 0.457222] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880 [ 0.457309] usb usb7: configuration #1 chosen from 1 choice [ 0.457333] hub 7-0:1.0: USB hub found [ 0.457339] hub 7-0:1.0: 2 ports detected [ 0.457428] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.479713] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.479731] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.479839] mice: PS/2 mouse device common for all mice [ 0.482351] rtc_cmos 00:07: RTC can wake from S4 [ 0.482383] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 0.482417] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.482507] device-mapper: uevent: version 1.0.3 [ 0.482591] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.482804] device-mapper: multipath: version 1.1.0 loaded [ 0.482807] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.482911] EISA: Probing bus 0 at eisa.0 [ 0.482917] Cannot allocate resource for EISA slot 1 [ 0.482919] Cannot allocate resource for EISA slot 2 [ 0.482921] Cannot allocate resource for EISA slot 3 [ 0.482923] Cannot allocate resource for EISA slot 4 [ 0.482925] Cannot allocate resource for EISA slot 5 [ 0.482927] Cannot allocate resource for EISA slot 6 [ 0.482936] EISA: Detected 0 cards. [ 0.483068] cpuidle: using governor ladder [ 0.483173] cpuidle: using governor menu [ 0.483589] TCP cubic registered [ 0.483731] NET: Registered protocol family 10 [ 0.484197] lo: Disabled Privacy Extensions [ 0.484525] NET: Registered protocol family 17 [ 0.485186] Using IPI No-Shortcut mode [ 0.485248] PM: Resume from disk failed. [ 0.485259] registered taskstats version 1 [ 0.485985] Magic number: 10:341:72 [ 0.486057] rtc_cmos 00:07: setting system clock to 2010-09-10 10:04:52 UTC (1284113092) [ 0.486060] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.486061] EDD information not available. [ 0.511722] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 0.596402] ata1.00: ATAPI: TEAC DVD+/-RW DVW28SLC, A.06, max UDMA/33 [ 0.628305] ata1.00: configured for UDMA/33 [ 0.655522] ACPI: Battery Slot [BAT1] (battery present) [ 0.758882] isapnp: No Plug & Play device found [ 0.768196] scsi 0:0:0:0: CD-ROM TEAC DVD+-RW DVW28SLC A.06 PQ: 0 ANSI: 5 [ 0.796592] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy [ 0.796596] Uniform CD-ROM driver Revision: 3.20 [ 0.796728] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 0.796768] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 0.796829] Freeing unused kernel memory: 660k freed [ 0.797247] Write protecting the kernel text: 4680k [ 0.797303] Write protecting the kernel read-only data: 1840k [ 0.812495] udev: starting version 151 [ 0.918494] ahci 0000:00:1f.2: version 3.0 [ 0.918516] ahci 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 0.918562] alloc irq_desc for 29 on node -1 [ 0.918565] alloc kstat_irqs on node -1 [ 0.918577] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X [ 0.918645] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 0.918648] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc [ 0.918654] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.924200] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.924239] r8169 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.924329] r8169 0000:07:00.0: setting latency timer to 64 [ 0.924479] alloc irq_desc for 30 on node -1 [ 0.924481] alloc kstat_irqs on node -1 [ 0.924517] r8169 0000:07:00.0: irq 30 for MSI/MSI-X [ 0.925192] eth0: RTL8168c/8111c at 0xf80ea000, 00:21:70:e5:3b:ef, XID 1c2000c0 IRQ 30 [ 0.931742] alloc irq_desc for 22 on node -1 [ 0.931744] alloc kstat_irqs on node -1 [ 0.931750] ohci1394 0000:08:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.936641] scsi2 : ahci [ 0.938957] scsi3 : ahci [ 0.939063] scsi4 : ahci [ 0.939198] ata3: SATA max UDMA/133 abar m2048@0xf8304000 port 0xf8304100 irq 29 [ 0.939202] ata4: SATA max UDMA/133 abar m2048@0xf8304000 port 0xf8304180 irq 29 [ 0.939205] ata5: SATA max UDMA/133 abar m2048@0xf8304000 port 0xf8304200 irq 29 [ 0.985093] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[f8000000-f80007ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 1.088060] usb 1-3: new high speed USB device using ehci_hcd and address 3 [ 1.256067] ata5: SATA link down (SStatus 0 SControl 300) [ 1.256097] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.256121] ata4: SATA link down (SStatus 0 SControl 300) [ 1.256679] ACPI Warning for \_SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006) [ 1.256686] ata3.00: _GTF unexpected object type 0x1 [ 1.256810] ata3.00: ATA-8: FUJITSU MHZ2250BJ FFS G2, 0085001C, max UDMA/100 [ 1.256815] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.257555] ata3.00: _GTF unexpected object type 0x1 [ 1.257707] ata3.00: configured for UDMA/100 [ 1.264265] usb 1-3: configuration #1 chosen from 1 choice [ 1.272211] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHZ2250B 0085 PQ: 0 ANSI: 5 [ 1.272339] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.272365] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.272415] sd 2:0:0:0: [sda] Write Protect is off [ 1.272418] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.272442] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.272619] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 1.346591] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.504045] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 1.682475] usb 3-2: configuration #1 chosen from 1 choice [ 1.854273] EXT4-fs (sda5): mounted filesystem with ordered data mode [ 2.256176] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00000010a000b000] [ 10.131887] udev: starting version 151 [ 10.205546] Adding 1951736k swap on /dev/sda6. Priority:-1 extents:1 across:1951736k [ 10.244322] lp: driver loaded but no devices found [ 10.296156] acpi device:03: registered as cooling_device2 [ 10.296328] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6 [ 10.296383] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 10.371978] Linux agpgart interface v0.103 [ 10.427027] cfg80211: Calling CRDA to update world regulatory domain [ 10.467104] cfg80211: World regulatory domain updated: [ 10.467107] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 10.467110] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.467113] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.467115] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.467118] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.467120] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.479161] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 10.480270] vga16fb: initializing [ 10.480273] vga16fb: mapped to 0xc00a0000 [ 10.480328] fb0: VGA16 VGA frame buffer device [ 10.494474] type=1505 audit(1284123902.507:2): operation="profile_load" pid=666 name="/sbin/dhclient3" [ 10.495121] type=1505 audit(1284123902.507:3): operation="profile_load" pid=666 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 10.495467] type=1505 audit(1284123902.507:4): operation="profile_load" pid=666 name="/usr/lib/connman/scripts/dhclient-script" [ 10.498183] sdhci: Secure Digital Host Controller Interface driver [ 10.498185] sdhci: Copyright(c) Pierre Ossman [ 10.499461] sdhci-pci 0000:08:05.2: SDHCI controller found [1217:7120] (rev 2) [ 10.499481] sdhci-pci 0000:08:05.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 10.499503] mmc0: Unknown controller version (2). You may experience problems. [ 10.499599] Registered led device: mmc0:: [ 10.499632] mmc0: SDHCI controller on PCI [0000:08:05.2] using DMA [ 10.529946] Bluetooth: Core ver 2.15 [ 10.532580] NET: Registered protocol family 31 [ 10.532582] Bluetooth: HCI device and connection manager initialized [ 10.532585] Bluetooth: HCI socket layer initialized [ 10.534169] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 10.544885] Linux video capture interface: v2.00 [ 10.562854] uvcvideo: Found UVC 1.00 device Integrated Webcam (0c45:63e0) [ 10.595637] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks [ 10.595640] iwl3945: Copyright(c) 2003-2009 Intel Corporation [ 10.595760] iwl3945 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 10.595780] iwl3945 0000:06:00.0: setting latency timer to 64 [ 10.672750] usbcore: registered new interface driver btusb [ 10.672921] input: Integrated Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input7 [ 10.676552] iwl3945 0000:06:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels [ 10.676555] iwl3945 0000:06:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 10.676736] alloc irq_desc for 31 on node -1 [ 10.676737] alloc kstat_irqs on node -1 [ 10.676786] iwl3945 0000:06:00.0: irq 31 for MSI/MSI-X [ 10.863871] Console: switching to colour frame buffer device 80x30 [ 10.876152] usbcore: registered new interface driver uvcvideo [ 10.876155] USB Video Class driver (v0.1.0) [ 10.901858] nvidia: module license 'NVIDIA' taints kernel. [ 10.901862] Disabling lock debugging due to kernel taint [ 10.993904] type=1505 audit(1284123903.005:5): operation="profile_load" pid=773 name="/usr/share/gdm/guest-session/Xsession" [ 10.995424] type=1505 audit(1284123903.005:6): operation="profile_replace" pid=774 name="/sbin/dhclient3" [ 10.996147] type=1505 audit(1284123903.009:7): operation="profile_replace" pid=774 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 10.996500] type=1505 audit(1284123903.009:8): operation="profile_replace" pid=774 name="/usr/lib/connman/scripts/dhclient-script" [ 11.000498] type=1505 audit(1284123903.013:9): operation="profile_load" pid=775 name="/usr/bin/evince" [ 11.011256] type=1505 audit(1284123903.021:10): operation="profile_load" pid=775 name="/usr/bin/evince-previewer" [ 11.021348] type=1505 audit(1284123903.033:11): operation="profile_load" pid=775 name="/usr/bin/evince-thumbnailer" [ 11.111066] r8169: eth0: link up [ 11.111082] r8169: eth0: link up [ 11.175890] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input8 [ 11.213332] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9 [ 11.237259] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 11.293358] input: Dell WMI hotkeys as /devices/virtual/input/input10 [ 11.372921] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 11.372953] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 11.381996] Bluetooth: L2CAP ver 2.14 [ 11.381999] Bluetooth: L2CAP socket layer initialized [ 11.387374] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.387377] Bluetooth: BNEP filters: protocol multicast [ 11.394732] Bridge firewalling registered [ 11.404207] Bluetooth: SCO (Voice Link) ver 0.6 [ 11.404209] Bluetooth: SCO socket layer initialized [ 11.447890] ppdev: user-space parallel port driver [ 11.448773] hda_codec: ALC268: BIOS auto-probing. [ 11.449231] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11 [ 11.470205] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 11.470217] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 11.470226] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 11.470235] nvidia 0000:01:00.0: setting latency timer to 64 [ 11.471045] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.22 Sun Nov 8 20:26:31 PST 2009 [ 11.672248] Bluetooth: RFCOMM TTY layer initialized [ 11.672256] Bluetooth: RFCOMM socket layer initialized [ 11.672256] Bluetooth: RFCOMM ver 1.11 [ 12.188164] iwl3945 0000:06:00.0: firmware: requesting iwlwifi-3945-2.ucode [ 12.203373] iwl3945 0000:06:00.0: loaded firmware version 15.32.2.9 [ 12.282409] Registered led device: iwl-phy0::radio [ 12.282656] Registered led device: iwl-phy0::assoc [ 12.282977] Registered led device: iwl-phy0::RX [ 12.283164] Registered led device: iwl-phy0::TX [ 12.293051] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 22.060064] eth0: no IPv6 routers present [ 24.675611] ACPI: EC: GPE storm detected, transactions will use polling mode [ 123.505144] CE: hpet increasing min_delta_ns to 15000 nsec [ 1972.175095] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 1972.176556] SGI XFS Quota Management subsystem [ 1972.182809] JFS: nTxBlock = 8192, nTxLock = 65536 [ 1972.202771] NTFS driver 2.1.29 [Flags: R/O MODULE]. [ 1972.216375] QNX4 filesystem 0.2.3 registered. [ 1972.258798] Btrfs loaded [ 2073.363458] udev: starting version 151 [ 2876.572411] usb 2-3: new high speed USB device using ehci_hcd and address 2 [ 2876.706308] usb 2-3: configuration #1 chosen from 1 choice [ 2876.733439] Initializing USB Mass Storage driver... [ 2876.733607] scsi5 : SCSI emulation for USB Mass Storage devices [ 2876.733764] usbcore: registered new interface driver usb-storage [ 2876.733767] USB Mass Storage support registered. [ 2876.734551] usb-storage: device found at 2 [ 2876.734553] usb-storage: waiting for device to settle before scanning [ 2881.732359] usb-storage: device scan complete [ 2881.732944] scsi 5:0:0:0: Direct-Access Seagate Desktop 0130 PQ: 0 ANSI: 4 [ 2881.734090] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 2881.738822] sd 5:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 2881.739796] sd 5:0:0:0: [sdb] Write Protect is off [ 2881.739805] sd 5:0:0:0: [sdb] Mode Sense: 2f 08 00 00 [ 2881.739811] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 2881.741259] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 2881.741263] sdb: sdb1 [ 2881.761022] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 2881.761032] sd 5:0:0:0: [sdb] Attached SCSI disk [ 3007.715908] __ratelimit: 9 callbacks suppressed [ 3007.715912] type=1503 audit(1284126898.249:15): operation="open" pid=14010 parent=14007 profile="/usr/bin/evince-thumbnailer" requested_mask="r::" denied_mask="r::" fsuid=1000 ouid=1000 name=2F6D656469612F457870616E73696F6E2044726976652F6261636B5F75705F4E4F5445424F4F4B5F7365745F323031302F6C696E75782F706564726F2F446F776E6C6F61642F313030352E35363131 [ 3007.729408] type=1503 audit(1284126898.265:16): operation="open" pid=14010 parent=14007 profile="/usr/bin/evince-thumbnailer" requested_mask="r::" denied_mask="r::" fsuid=1000 ouid=1000 name=2F6D656469612F457870616E73696F6E2044726976652F6261636B5F75705F4E4F5445424F4F4B5F7365745F323031302F6C696E75782F706564726F2F446F776E6C6F61642F313030352E35363131 [ 3007.748253] type=1503 audit(1284126898.285:17): operation="open" pid=14011 parent=14007 profile="/usr/bin/evince-thumbnailer" requested_mask="r::" denied_mask="r::" fsuid=1000 ouid=1000 name=2F6D656469612F457870616E73696F6E2044726976652F6261636B5F75705F4E4F5445424F4F4B5F7365745F323031302F6C696E75782F706564726F2F446F776E6C6F61642F313030362E32303639 [ 3007.749166] type=1503 audit(1284126898.285:18): operation="open" pid=14011 parent=14007 profile="/usr/bin/evince-thumbnailer" requested_mask="r::" denied_mask="r::" fsuid=1000 ouid=1000 name=2F6D656469612F457870616E73696F6E2044726976652F6261636B5F75705F4E4F5445424F4F4B5F7365745F323031302F6C696E75782F706564726F2F446F776E6C6F61642F313030362E32303639 [ 3007.783019] type=1503 audit(1284126898.317:19): operation="open" pid=14012 parent=14007 profile="/usr/bin/evince-thumbnailer" requested_mask="r::" denied_mask="r::" fsuid=1000 ouid=1000 name=2F6D656469612F457870616E73696F6E2044726976652F6261636B5F75705F4E4F5445424F4F4B5F7365745F323031302F6C696E75782F706564726F2F446F776E6C6F61642F313030362E33383231 [ 3007.783813] type=1503 audit(1284126898.317:20): operation="open" pid=14012 parent=14007 profile="/usr/bin/evince-thumbnailer" requested_mask="r::" denied_mask="r::" fsuid=1000 ouid=1000 name=2F6D656469612F457870616E73696F6E2044726976652F6261636B5F75705F4E4F5445424F4F4B5F7365745F323031302F6C696E75782F706564726F2F446F776E6C6F61642F313030362E33383231 [ 3007.811086] type=1503 audit(1284126898.345:21): operation="open" pid=14013 parent=14007 profile="/usr/bin/evince-thumbnailer" requested_mask="r::" denied_mask="r::" fsuid=1000 ouid=1000 name=2F6D656469612F457870616E73696F6E2044726976652F6261636B5F75705F4E4F5445424F4F4B5F7365745F323031302F6C696E75782F706564726F2F446F776E6C6F61642F313030362E33383430 [ 3007.811945] type=1503 audit(1284126898.345:22): operation="open" pid=14013 parent=14007 profile="/usr/bin/evince-thumbnailer" requested_mask="r::" denied_mask="r::" fsuid=1000 ouid=1000 name=2F6D656469612F457870616E73696F6E2044726976652F6261636B5F75705F4E4F5445424F4F4B5F7365745F323031302F6C696E75782F706564726F2F446F776E6C6F61642F313030362E33383430 [ 3007.834081] type=1503 audit(1284126898.369:23): operation="open" pid=14014 parent=14007 profile="/usr/bin/evince-thumbnailer" requested_mask="r::" denied_mask="r::" fsuid=1000 ouid=1000 name=2F6D656469612F457870616E73696F6E2044726976652F6261636B5F75705F4E4F5445424F4F4B5F7365745F323031302F6C696E75782F706564726F2F446F776E6C6F61642F313030362E35343836 [ 3007.834890] type=1503 audit(1284126898.369:24): operation="open" pid=14014 parent=14007 profile="/usr/bin/evince-thumbnailer" requested_mask="r::" denied_mask="r::" fsuid=1000 ouid=1000 name=2F6D656469612F457870616E73696F6E2044726976652F6261636B5F75705F4E4F5445424F4F4B5F7365745F323031302F6C696E75782F706564726F2F446F776E6C6F61642F313030362E35343836 [ 3501.268047] CE: hpet increasing min_delta_ns to 22500 nsec