[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffa0000 (usable) [ 0.000000] BIOS-e820: 00000000bffa0000 - 00000000bffae000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bffae000 - 00000000bffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbffa0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 1 base 000000000 mask F00000000 write-back [ 0.000000] 2 base 100000000 mask FC0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bffa0000 (usable) [ 0.000000] modified: 00000000bffa0000 - 00000000bffae000 (ACPI data) [ 0.000000] modified: 00000000bffae000 - 00000000bffe0000 (ACPI NVS) [ 0.000000] modified: 00000000bffe0000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 7f711000 - 7ffff970 [ 0.000000] Allocated new RAMDISK: 008de000 - 011cc970 [ 0.000000] Move RAMDISK from 000000007f711000 - 000000007ffff96f to 008de000 - 011cc96f [ 0.000000] ACPI: RSDP 000fb7e0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT bffa0000 0003C (v01 A_M_I_ OEMRSDT 08000820 MSFT 00000097) [ 0.000000] ACPI: FACP bffa0200 00084 (v02 A_M_I_ OEMFACP 08000820 MSFT 00000097) [ 0.000000] ACPI: DSDT bffa05c0 056A3 (v01 A0882 A0882000 00000000 INTL 20051117) [ 0.000000] ACPI: FACS bffae000 00040 [ 0.000000] ACPI: APIC bffa0390 0006C (v01 A_M_I_ OEMAPIC 08000820 MSFT 00000097) [ 0.000000] ACPI: MCFG bffa0400 0003C (v01 A_M_I_ OEMMCFG 08000820 MSFT 00000097) [ 0.000000] ACPI: OEMB bffae040 00080 (v01 A_M_I_ AMI_OEM 08000820 MSFT 00000097) [ 0.000000] ACPI: HPET bffa5c70 00038 (v01 A_M_I_ OEMHPET 08000820 MSFT 00000097) [ 0.000000] ACPI: GSCI bffae0c0 02024 (v01 A_M_I_ GMCHSCI 08000820 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2183MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00008da000 - 00008dd23c] BRK ==> [00008da000 - 00008dd23c] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008de000 - 00011cc970] NEW RAMDISK ==> [00008de000 - 00011cc970] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000bffa0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bffa0 [ 0.000000] On node 0 totalpages: 786223 [ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c11ce200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4368 pages used for memmap [ 0.000000] HighMem zone: 554642 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36024 r0 d21320 u1048576 [ 0.000000] pcpu-alloc: s36024 r0 d21320 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780079 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 15726400 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000bffa0) [ 0.000000] Memory: 3085436k/3145344k available (4673k kernel code, 58248k reserved, 2122k data, 656k init, 2236040k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB) [ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB) [ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2666.146 MHz processor. [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5332.29 BogoMIPS (lpj=10664584) [ 0.004018] Security Framework initialized [ 0.004035] AppArmor: AppArmor initialized [ 0.004040] Mount-cache hash table entries: 512 [ 0.004144] Initializing cgroup subsys ns [ 0.004148] Initializing cgroup subsys cpuacct [ 0.004151] Initializing cgroup subsys memory [ 0.004157] Initializing cgroup subsys devices [ 0.004159] Initializing cgroup subsys freezer [ 0.004160] Initializing cgroup subsys net_cls [ 0.004177] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004179] CPU: L2 cache: 3072K [ 0.004181] CPU: Physical Processor ID: 0 [ 0.004183] CPU: Processor Core ID: 0 [ 0.004186] mce: CPU supports 6 MCE banks [ 0.004193] CPU0: Thermal monitoring enabled (TM2) [ 0.004195] using mwait in idle threads. [ 0.004200] Performance Events: Core2 events, Intel PMU driver. [ 0.004207] ... version: 2 [ 0.004208] ... bit width: 40 [ 0.004209] ... generic registers: 2 [ 0.004211] ... value mask: 000000ffffffffff [ 0.004212] ... max period: 000000007fffffff [ 0.004214] ... fixed-purpose events: 3 [ 0.004215] ... event mask: 0000000700000003 [ 0.004219] Checking 'hlt' instruction... OK. [ 0.022317] ACPI: Core revision 20090903 [ 0.032007] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.032011] ftrace: allocating 21771 entries in 43 pages [ 0.036043] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.036343] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.076616] CPU0: Intel(R) Core(TM)2 Duo CPU E7300 @ 2.66GHz stepping 06 [ 0.080001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 3072K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.008000] CPU1: Thermal monitoring enabled (TM2) [ 0.164040] CPU1: Intel(R) Core(TM)2 Duo CPU E7300 @ 2.66GHz stepping 06 [ 0.164049] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.168015] Brought up 2 CPUs [ 0.168017] Total of 2 processors activated (10665.53 BogoMIPS). [ 0.168555] CPU0 attaching sched-domain: [ 0.168558] domain 0: span 0-1 level MC [ 0.168560] groups: 0 1 [ 0.168565] CPU1 attaching sched-domain: [ 0.168567] domain 0: span 0-1 level MC [ 0.168568] groups: 1 0 [ 0.168653] devtmpfs: initialized [ 0.168653] regulator: core version 0.5 [ 0.168653] Time: 0:14:24 Date: 08/23/10 [ 0.168653] NET: Registered protocol family 16 [ 0.168653] Trying to unpack rootfs image as initramfs... [ 0.168653] EISA bus registered [ 0.168653] ACPI: bus type pci registered [ 0.168653] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.168653] PCI: Not using MMCONFIG. [ 0.168653] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4 [ 0.168653] PCI: Using configuration type 1 for base access [ 0.172075] bio: create slab at 0 [ 0.172677] ACPI: EC: Look up EC in DSDT [ 0.174681] ACPI: Executed 1 blocks of module-level executable AML code [ 0.177746] ACPI: Interpreter enabled [ 0.177755] ACPI: (supports S0 S1 S3 S4 S5) [ 0.177772] ACPI: Using IOAPIC for interrupt routing [ 0.177809] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.180195] PCI: MCFG area at f0000000 reserved in ACPI motherboard resources [ 0.180197] PCI: Using MMCONFIG for extended config space [ 0.185856] ACPI Warning: Incorrect checksum in table [OEMB] - 8F, should be 82 (20090903/tbutils-314) [ 0.186620] ACPI: No dock devices found. [ 0.186709] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.186793] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.186796] pci 0000:00:01.0: PME# disabled [ 0.186849] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf9ffc000-0xf9ffffff] [ 0.186885] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.186888] pci 0000:00:1b.0: PME# disabled [ 0.186941] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.186944] pci 0000:00:1c.0: PME# disabled [ 0.186999] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.187002] pci 0000:00:1c.1: PME# disabled [ 0.187044] pci 0000:00:1d.0: reg 20 io port: [0xd480-0xd49f] [ 0.187085] pci 0000:00:1d.1: reg 20 io port: [0xd800-0xd81f] [ 0.187126] pci 0000:00:1d.2: reg 20 io port: [0xd880-0xd89f] [ 0.187167] pci 0000:00:1d.3: reg 20 io port: [0xdc00-0xdc1f] [ 0.187213] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf9ffbc00-0xf9ffbfff] [ 0.187257] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.187260] pci 0000:00:1d.7: PME# disabled [ 0.187366] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.187369] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.187372] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.187410] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.187415] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.187421] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7] [ 0.187426] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb] [ 0.187432] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] [ 0.187467] pci 0000:00:1f.2: reg 10 io port: [0xd400-0xd407] [ 0.187472] pci 0000:00:1f.2: reg 14 io port: [0xd080-0xd083] [ 0.187477] pci 0000:00:1f.2: reg 18 io port: [0xd000-0xd007] [ 0.187482] pci 0000:00:1f.2: reg 1c io port: [0xcc00-0xcc03] [ 0.187486] pci 0000:00:1f.2: reg 20 io port: [0xc880-0xc88f] [ 0.187506] pci 0000:00:1f.2: PME# supported from D3hot [ 0.187509] pci 0000:00:1f.2: PME# disabled [ 0.187548] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.187593] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] [ 0.187601] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xc0000000-0xdfffffff] [ 0.187609] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff] [ 0.187614] pci 0000:01:00.0: reg 24 io port: [0xec00-0xec7f] [ 0.187619] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfea80000-0xfeafffff] [ 0.187674] pci 0000:00:01.0: bridge io port: [0xe000-0xefff] [ 0.187677] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfeafffff] [ 0.187681] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xdfffffff] [ 0.187763] pci 0000:02:00.0: reg 10 64bit mmio: [0xfebc0000-0xfebfffff] [ 0.187792] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfeba0000-0xfebbffff] [ 0.187826] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.187830] pci 0000:02:00.0: PME# disabled [ 0.187875] pci 0000:00:1c.1: bridge 32bit mmio: [0xfeb00000-0xfebfffff] [ 0.187919] pci 0000:00:1e.0: transparent bridge [ 0.187939] pci_bus 0000:00: on NUMA node 0 [ 0.187943] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.188045] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.188115] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.188158] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 0.194617] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.194700] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.194782] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.194863] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.194944] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.195025] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.195107] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.195189] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.195274] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.195276] vgaarb: loaded [ 0.195368] SCSI subsystem initialized [ 0.195417] libata version 3.00 loaded. [ 0.195469] usbcore: registered new interface driver usbfs [ 0.195478] usbcore: registered new interface driver hub [ 0.195497] usbcore: registered new device driver usb [ 0.195588] ACPI: WMI: Mapper loaded [ 0.195590] PCI: Using ACPI for IRQ routing [ 0.195701] NetLabel: Initializing [ 0.195703] NetLabel: domain hash size = 128 [ 0.195704] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.195713] NetLabel: unlabeled traffic allowed by default [ 0.195736] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.195740] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 1.636643] Switching to clocksource tsc [ 1.637818] AppArmor: AppArmor Filesystem Enabled [ 1.637848] pnp: PnP ACPI init [ 1.637866] ACPI: bus type pnp registered [ 1.641397] pnp: PnP ACPI: found 18 devices [ 1.641401] ACPI: ACPI bus type pnp unregistered [ 1.641405] PnPBIOS: Disabled by ACPI PNP [ 1.641420] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 1.641429] system 00:08: ioport range 0x290-0x297 has been reserved [ 1.641434] system 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 1.641436] system 00:09: ioport range 0x800-0x87f has been reserved [ 1.641439] system 00:09: ioport range 0x480-0x4bf has been reserved [ 1.641441] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 1.641443] system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved [ 1.641448] system 00:0c: iomem range 0xffc00000-0xffefffff has been reserved [ 1.641454] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved [ 1.641456] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved [ 1.641461] system 00:10: iomem range 0xf0000000-0xf3ffffff has been reserved [ 1.641466] system 00:11: iomem range 0x0-0x9ffff could not be reserved [ 1.641468] system 00:11: iomem range 0xc0000-0xcffff could not be reserved [ 1.641470] system 00:11: iomem range 0xe0000-0xfffff could not be reserved [ 1.641473] system 00:11: iomem range 0x100000-0xbfffffff could not be reserved [ 1.672105] Freeing initrd memory: 9146k freed [ 1.676179] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 1.676182] pci 0000:00:01.0: IO window: 0xe000-0xefff [ 1.676186] pci 0000:00:01.0: MEM window: 0xfa000000-0xfeafffff [ 1.676189] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000dfffffff [ 1.676192] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03 [ 1.676195] pci 0000:00:1c.0: IO window: 0x1000-0x1fff [ 1.676199] pci 0000:00:1c.0: MEM window: 0xe0000000-0xe01fffff [ 1.676202] pci 0000:00:1c.0: PREFETCH window: 0x000000e0200000-0x000000e03fffff [ 1.676207] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 [ 1.676210] pci 0000:00:1c.1: IO window: 0x2000-0x2fff [ 1.676214] pci 0000:00:1c.1: MEM window: 0xfeb00000-0xfebfffff [ 1.676217] pci 0000:00:1c.1: PREFETCH window: 0x000000e0400000-0x000000e05fffff [ 1.676222] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 [ 1.676224] pci 0000:00:1e.0: IO window: disabled [ 1.676228] pci 0000:00:1e.0: MEM window: disabled [ 1.676231] pci 0000:00:1e.0: PREFETCH window: disabled [ 1.676248] alloc irq_desc for 16 on node -1 [ 1.676250] alloc kstat_irqs on node -1 [ 1.676256] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.676260] pci 0000:00:01.0: setting latency timer to 64 [ 1.676266] pci 0000:00:1c.0: enabling device (0104 -> 0107) [ 1.676270] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.676273] pci 0000:00:1c.0: setting latency timer to 64 [ 1.676280] pci 0000:00:1c.1: enabling device (0106 -> 0107) [ 1.676282] alloc irq_desc for 17 on node -1 [ 1.676284] alloc kstat_irqs on node -1 [ 1.676287] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.676290] pci 0000:00:1c.1: setting latency timer to 64 [ 1.676295] pci 0000:00:1e.0: setting latency timer to 64 [ 1.676299] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 1.676301] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 1.676304] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] [ 1.676306] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfeafffff] [ 1.676308] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xdfffffff] [ 1.676310] pci_bus 0000:03: resource 0 io: [0x1000-0x1fff] [ 1.676312] pci_bus 0000:03: resource 1 mem: [0xe0000000-0xe01fffff] [ 1.676314] pci_bus 0000:03: resource 2 pref mem [0xe0200000-0xe03fffff] [ 1.676316] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] [ 1.676318] pci_bus 0000:02: resource 1 mem: [0xfeb00000-0xfebfffff] [ 1.676320] pci_bus 0000:02: resource 2 pref mem [0xe0400000-0xe05fffff] [ 1.676322] pci_bus 0000:04: resource 3 io: [0x00-0xffff] [ 1.676324] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff] [ 1.676364] NET: Registered protocol family 2 [ 1.676456] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.676730] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.677235] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 1.677448] TCP: Hash tables configured (established 131072 bind 65536) [ 1.677450] TCP reno registered [ 1.677508] NET: Registered protocol family 1 [ 1.677603] pci 0000:01:00.0: Boot video device [ 1.677763] cpufreq-nforce2: No nForce2 chipset. [ 1.677783] Scanning for low memory corruption every 60 seconds [ 1.677867] audit: initializing netlink socket (disabled) [ 1.677875] type=2000 audit(1282522465.676:1): initialized [ 1.685440] highmem bounce pool size: 64 pages [ 1.685444] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.686580] VFS: Disk quotas dquot_6.5.2 [ 1.686625] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.687055] fuse init (API version 7.13) [ 1.687120] msgmni has been set to 1679 [ 1.687278] alg: No test for stdrng (krng) [ 1.687318] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.687320] io scheduler noop registered [ 1.687322] io scheduler anticipatory registered [ 1.687323] io scheduler deadline registered [ 1.687354] io scheduler cfq registered (default) [ 1.687454] alloc irq_desc for 24 on node -1 [ 1.687456] alloc kstat_irqs on node -1 [ 1.687463] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 1.687467] pcieport 0000:00:01.0: setting latency timer to 64 [ 1.687543] alloc irq_desc for 25 on node -1 [ 1.687544] alloc kstat_irqs on node -1 [ 1.687550] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 1.687556] pcieport 0000:00:1c.0: setting latency timer to 64 [ 1.687646] alloc irq_desc for 26 on node -1 [ 1.687648] alloc kstat_irqs on node -1 [ 1.687653] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X [ 1.687659] pcieport 0000:00:1c.1: setting latency timer to 64 [ 1.687725] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.687787] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.687867] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.687870] ACPI: Power Button [PWRB] [ 1.687905] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.687907] ACPI: Power Button [PWRF] [ 1.688356] ACPI: SSDT bffb00f0 00214 (v01 AMI CPU1PM 00000001 INTL 20060113) [ 1.688560] processor LNXCPU:00: registered as cooling_device0 [ 1.688792] ACPI: SSDT bffb0310 00143 (v01 AMI CPU2PM 00000001 INTL 20060113) [ 1.688976] processor LNXCPU:01: registered as cooling_device1 [ 1.690861] isapnp: Scanning for PnP cards... [ 1.691887] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.691972] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.692368] 00:0f: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.693150] brd: module loaded [ 1.693499] loop: module loaded [ 1.693555] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.693613] ata_piix 0000:00:1f.1: version 2.13 [ 1.693623] alloc irq_desc for 18 on node -1 [ 1.693624] alloc kstat_irqs on node -1 [ 1.693628] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.693655] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.693709] scsi0 : ata_piix [ 1.693762] scsi1 : ata_piix [ 1.694650] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 1.694653] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 1.694667] alloc irq_desc for 19 on node -1 [ 1.694669] alloc kstat_irqs on node -1 [ 1.694672] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.694676] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.694699] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.694738] scsi2 : ata_piix [ 1.694776] scsi3 : ata_piix [ 1.695809] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 19 [ 1.695812] ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 19 [ 1.696058] Fixed MDIO Bus: probed [ 1.696085] PPP generic driver version 2.4.2 [ 1.696108] tun: Universal TUN/TAP device driver, 1.6 [ 1.696110] tun: (C) 1999-2004 Max Krasnyansky [ 1.696171] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.696185] alloc irq_desc for 23 on node -1 [ 1.696187] alloc kstat_irqs on node -1 [ 1.696190] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.696198] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.696200] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.696227] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.696240] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 1.696249] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.700142] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.700152] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9ffbc00 [ 1.716506] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.716568] usb usb1: configuration #1 chosen from 1 choice [ 1.716591] hub 1-0:1.0: USB hub found [ 1.716597] hub 1-0:1.0: 8 ports detected [ 1.716644] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.716654] uhci_hcd: USB Universal Host Controller Interface driver [ 1.716669] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.716673] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.716675] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.716697] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.716716] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d480 [ 1.716785] usb usb2: configuration #1 chosen from 1 choice [ 1.716806] hub 2-0:1.0: USB hub found [ 1.716811] hub 2-0:1.0: 2 ports detected [ 1.716844] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.716848] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.716850] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.716872] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.716891] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800 [ 1.716954] usb usb3: configuration #1 chosen from 1 choice [ 1.716972] hub 3-0:1.0: USB hub found [ 1.716977] hub 3-0:1.0: 2 ports detected [ 1.717007] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.717012] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.717014] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.717038] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.717062] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d880 [ 1.717125] usb usb4: configuration #1 chosen from 1 choice [ 1.717143] hub 4-0:1.0: USB hub found [ 1.717148] hub 4-0:1.0: 2 ports detected [ 1.717180] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 1.717184] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.717187] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.717210] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.717234] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000dc00 [ 1.717295] usb usb5: configuration #1 chosen from 1 choice [ 1.717314] hub 5-0:1.0: USB hub found [ 1.717318] hub 5-0:1.0: 2 ports detected [ 1.717394] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.717396] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.717885] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.717957] mice: PS/2 mouse device common for all mice [ 1.718046] rtc_cmos 00:03: RTC can wake from S4 [ 1.718072] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.718093] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.718167] device-mapper: uevent: version 1.0.3 [ 1.718230] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.718275] device-mapper: multipath: version 1.1.0 loaded [ 1.718277] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.718353] EISA: Probing bus 0 at eisa.0 [ 1.718357] Cannot allocate resource for EISA slot 1 [ 1.718359] Cannot allocate resource for EISA slot 2 [ 1.718374] EISA: Detected 0 cards. [ 1.718424] cpuidle: using governor ladder [ 1.718425] cpuidle: using governor menu [ 1.718749] TCP cubic registered [ 1.718862] NET: Registered protocol family 10 [ 1.719217] lo: Disabled Privacy Extensions [ 1.719471] NET: Registered protocol family 17 [ 1.719769] Using IPI No-Shortcut mode [ 1.719823] PM: Resume from disk failed. [ 1.719832] registered taskstats version 1 [ 1.720050] Magic number: 6:903:203 [ 1.720095] rtc_cmos 00:03: setting system clock to 2010-08-23 00:14:26 UTC (1282522466) [ 1.720097] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.720099] EDD information not available. [ 1.740027] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.904782] ata4.01: ATAPI: TSSTcorp CDDVDW SH-S223F, SB00, max UDMA/100 [ 1.920743] ata4.01: configured for UDMA/100 [ 1.928838] ata3.00: ATA-8: WDC WD1600AAJS-22B4A0, 01.03A01, max UDMA/133 [ 1.928840] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.936831] ata3.00: configured for UDMA/133 [ 2.043927] isapnp: No Plug & Play device found [ 2.044026] scsi 2:0:0:0: Direct-Access ATA WDC WD1600AAJS-2 01.0 PQ: 0 ANSI: 5 [ 2.044110] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 2.044121] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 2.044147] sd 2:0:0:0: [sda] Write Protect is off [ 2.044149] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.044169] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.044273] sda: [ 2.044731] scsi 3:0:1:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB00 PQ: 0 ANSI: 5 [ 2.048463] sr0: scsi3-mmc drive: 32x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.048467] Uniform CD-ROM driver Revision: 3.20 [ 2.048555] sr 3:0:1:0: Attached scsi CD-ROM sr0 [ 2.048586] sr 3:0:1:0: Attached scsi generic sg1 type 5 [ 2.052602] sda1 sda2 sda3 sda4 [ 2.052801] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.052814] Freeing unused kernel memory: 656k freed [ 2.053064] Write protecting the kernel text: 4676k [ 2.053094] Write protecting the kernel read-only data: 1840k [ 2.067467] udev: starting version 151 [ 2.119663] Linux agpgart interface v0.103 [ 2.140607] atl1 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.140617] atl1 0000:02:00.0: setting latency timer to 64 [ 2.140635] atl1 0000:02:00.0: version 2.1.3 [ 2.158215] Floppy drive(s): fd0 is 1.44M [ 2.158438] [drm] Initialized drm 1.1.0 20060810 [ 2.181297] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.181305] nouveau 0000:01:00.0: setting latency timer to 64 [ 2.181592] FDC 0 is a post-1991 82077 [ 2.182797] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x096080c1) [ 2.183154] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 2.235856] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 2.235860] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 2.235862] [drm] nouveau 0000:01:00.0: Bios version 62.94.61.00 [ 2.235865] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported [ 2.235868] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0 [ 2.235870] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4 [ 2.235872] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07 [ 2.235875] [drm] nouveau 0000:01:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08 [ 2.235877] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff [ 2.235879] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 2 tag 0xff [ 2.235881] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 2 tag 0xff [ 2.235883] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 04011310 00000028 [ 2.235886] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00020030 [ 2.235888] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02000300 00000028 [ 2.235890] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 010223f1 00c0c080 [ 2.235897] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD2B9 [ 2.284122] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD72D [ 2.300016] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE77D [ 2.300026] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE89E [ 2.308085] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEB1B [ 2.308091] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEB80 [ 2.332010] [drm] nouveau 0000:01:00.0: 0xEB80: Condition still not met after 20ms, skipping following opcodes [ 2.332018] [drm] nouveau 0000:01:00.0: 0xC26E: parsing output script 0 [ 2.332025] [drm] nouveau 0000:01:00.0: 0xAC5A: parsing output script 0 [ 2.376510] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 2.430496] [TTM] Zone kernel: Available graphics memory: 430204 kiB. [ 2.430498] [TTM] Zone highmem: Available graphics memory: 1548224 kiB. [ 2.430505] [drm] nouveau 0000:01:00.0: 1024 MiB VRAM [ 2.446385] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 2.446391] mtrr: type mismatch for c0000000,20000000 old: write-back new: write-combining [ 2.446530] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 2.450271] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 2.450692] [drm] nouveau 0000:01:00.0: Detected a DAC output [ 2.450694] [drm] nouveau 0000:01:00.0: Detected a TMDS output [ 2.450696] [drm] nouveau 0000:01:00.0: Detected a DAC output [ 2.450698] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown [ 2.450701] [drm] nouveau 0000:01:00.0: Detected a VGA connector [ 2.450777] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector [ 2.570994] usb 2-1: configuration #1 chosen from 1 choice [ 2.629395] [drm] nouveau 0000:01:00.0: allocated 1680x1050 fb: 0x40250000, bo f6415a00 [ 2.629436] fb0: nouveaufb frame buffer device [ 2.629438] registered panic notifier [ 2.629442] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 [ 2.630712] vga16fb: initializing [ 2.630714] vga16fb: mapped to 0xc00a0000 [ 2.630716] vga16fb: not registering due to another framebuffer present [ 2.637126] Console: switching to colour frame buffer device 210x65 [ 2.637177] [drm] nouveau 0000:01:00.0: 0x121D: parsing clock script 0 [ 2.812015] usb 2-2: new low speed USB device using uhci_hcd and address 3 [ 2.987124] usb 2-2: configuration #1 chosen from 1 choice [ 2.997823] usbcore: registered new interface driver hiddev [ 3.010215] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input4 [ 3.010288] generic-usb 0003:046D:C018.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-2/input0 [ 3.010305] usbcore: registered new interface driver usbhid [ 3.010307] usbhid: v2.6:USB HID core driver [ 3.218780] xor: automatically using best checksumming function: pIII_sse [ 3.236503] pIII_sse : 9907.000 MB/sec [ 3.236505] xor: using function: pIII_sse (9907.000 MB/sec) [ 3.238425] device-mapper: dm-raid45: initialized v0.2594b [ 8.073187] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 8.115236] ISO 9660 Extensions: RRIP_1991A [ 8.353967] aufs 2-standalone.tree-20091207 [ 8.550471] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 46.647889] udev: starting version 151 [ 49.883466] intel_rng: FWH not detected [ 50.364676] parport_pc 00:07: reported by Plug and Play ACPI [ 50.364776] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 51.473275] ppdev: user-space parallel port driver [ 53.023492] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0xC302 [ 53.023510] usbcore: registered new interface driver usblp [ 53.576469] alloc irq_desc for 27 on node -1 [ 53.576472] alloc kstat_irqs on node -1 [ 53.576485] atl1 0000:02:00.0: irq 27 for MSI/MSI-X [ 53.576750] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 54.441127] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 54.441162] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 54.676315] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5 [ 60.300829] lp0: using parport0 (interrupt-driven). [ 60.588352] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2 [ 60.592252] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2 [ 65.456521] usb 2-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 [ 89.021308] end_request: I/O error, dev fd0, sector 0 [ 101.204890] end_request: I/O error, dev fd0, sector 0 [ 126.440867] [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 2 [ 127.012876] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2 [ 127.016643] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2 [ 174.934707] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 174.935908] SGI XFS Quota Management subsystem [ 175.005498] JFS: nTxBlock = 8192, nTxLock = 65536 [ 175.083580] NTFS driver 2.1.29 [Flags: R/O MODULE]. [ 175.278590] QNX4 filesystem 0.2.3 registered. [ 175.578131] Btrfs loaded [ 194.016135] usb 2-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 [ 198.252928] end_request: I/O error, dev fd0, sector 0 [ 210.432748] end_request: I/O error, dev fd0, sector 0 [ 288.865775] atl1 0000:02:00.0: eth0 link is up 100 Mbps full duplex [ 288.866010] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 298.880015] eth0: no IPv6 routers present