[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #39-Ubuntu SMP Wed Jul 28 06:07:29 UTC 2010 (Ubuntu 2.6.32-24.39-generic 2.6.32.15+drm33.5) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff30000 (usable) [ 0.000000] BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3ff30 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003ff30000 (usable) [ 0.000000] modified: 000000003ff30000 - 000000003ff40000 (ACPI data) [ 0.000000] modified: 000000003ff40000 - 000000003fff0000 (ACPI NVS) [ 0.000000] modified: 000000003fff0000 - 0000000040000000 (reserved) [ 0.000000] modified: 00000000fffc0000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 2f809000 - 2ffa3c0c [ 0.000000] ACPI: RSDP 000f9c20 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 3ff30000 00030 (v01 A M I OEMRSDT 12000501 MSFT 00000097) [ 0.000000] ACPI: FACP 3ff30200 00081 (v02 A M I OEMFACP 12000501 MSFT 00000097) [ 0.000000] ACPI: DSDT 3ff30360 03417 (v01 P4V8p P4V8p001 00000001 INTL 02002026) [ 0.000000] ACPI: FACS 3ff40000 00040 [ 0.000000] ACPI: APIC 3ff30300 00052 (v01 A M I OEMAPIC 12000501 MSFT 00000097) [ 0.000000] ACPI: OEMB 3ff40040 0003F (v01 A M I OEMBIOS 12000501 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008dbeb8] TEXT DATA BSS ==> [0000100000 - 00008dbeb8] [ 0.000000] #4 [002f809000 - 002ffa3c0c] RAMDISK ==> [002f809000 - 002ffa3c0c] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [00008dc000 - 00008df099] BRK ==> [00008dc000 - 00008df099] [ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003ff30 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003ff30 [ 0.000000] On node 0 totalpages: 261823 [ 0.000000] free_area_init_node: node 0, pgdat c0798780, node_mem_map c1001200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 271 pages used for memmap [ 0.000000] HighMem zone: 34339 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bffc0000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s36056 r0 d21288 u2097152 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259776 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=89bd8c57-7fd9-4307-b788-273caf2684e7 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5238400 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003ff30) [ 0.000000] Memory: 1016540k/1047744k available (4679k kernel code, 30112k reserved, 2116k data, 660k init, 138440k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0848000 ( 660 kB) [ 0.000000] .data : 0xc0591d43 - 0xc07a2e88 (2116 kB) [ 0.000000] .text : 0xc0100000 - 0xc0591d43 (4679 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration failed [ 0.000000] TSC: Unable to calibrate against PIT [ 0.000000] TSC: using PMTIMER reference calibration [ 0.000000] Detected 2991.533 MHz processor. [ 0.016006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5983.06 BogoMIPS (lpj=11966132) [ 0.016031] Security Framework initialized [ 0.016059] AppArmor: AppArmor initialized [ 0.016069] Mount-cache hash table entries: 512 [ 0.016252] Initializing cgroup subsys ns [ 0.016259] Initializing cgroup subsys cpuacct [ 0.016265] Initializing cgroup subsys memory [ 0.016274] Initializing cgroup subsys devices [ 0.016278] Initializing cgroup subsys freezer [ 0.016281] Initializing cgroup subsys net_cls [ 0.016316] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.016320] CPU: L2 cache: 1024K [ 0.016324] CPU: Physical Processor ID: 0 [ 0.016326] CPU: Processor Core ID: 0 [ 0.016331] mce: CPU supports 4 MCE banks [ 0.016346] CPU0: Thermal monitoring enabled (TM1) [ 0.016353] using mwait in idle threads. [ 0.016362] Performance Events: no PMU driver, software events only. [ 0.016371] Checking 'hlt' instruction... OK. [ 0.036158] ACPI: Core revision 20090903 [ 0.044016] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.044023] ftrace: allocating 21780 entries in 43 pages [ 0.048089] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.053039] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.092735] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04 [ 0.096001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.020000] Initializing CPU#1 [ 0.020000] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.020000] CPU: L2 cache: 1024K [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 0 [ 0.020000] CPU1: Thermal monitoring enabled (TM1) [ 0.180146] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04 [ 0.180168] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.184029] Brought up 2 CPUs [ 0.184034] Total of 2 processors activated (11966.95 BogoMIPS). [ 0.184592] CPU0 attaching sched-domain: [ 0.184598] domain 0: span 0-1 level SIBLING [ 0.184602] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 0.184610] domain 1: span 0-1 level MC [ 0.184613] groups: 0-1 (cpu_power = 1178) [ 0.184622] CPU1 attaching sched-domain: [ 0.184624] domain 0: span 0-1 level SIBLING [ 0.184628] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 0.184635] domain 1: span 0-1 level MC [ 0.184638] groups: 0-1 (cpu_power = 1178) [ 0.184797] devtmpfs: initialized [ 0.184797] regulator: core version 0.5 [ 0.184797] Time: 21:39:06 Date: 08/13/10 [ 0.184797] NET: Registered protocol family 16 [ 0.184797] Trying to unpack rootfs image as initramfs... [ 0.184797] EISA bus registered [ 0.184797] ACPI: bus type pci registered [ 0.184797] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 [ 0.184797] PCI: Using configuration type 1 for base access [ 0.188301] bio: create slab at 0 [ 0.189429] ACPI: EC: Look up EC in DSDT [ 0.194031] ACPI: Executed 1 blocks of module-level executable AML code [ 0.200604] ACPI: Interpreter enabled [ 0.200624] ACPI: (supports S0 S1 S4 S5) [ 0.200665] ACPI: Using IOAPIC for interrupt routing [ 0.213492] ACPI Warning: Incorrect checksum in table [OEMB] - 07, should be F9 (20090903/tbutils-314) [ 0.213670] ACPI: No dock devices found. [ 0.213868] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.213951] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf8000000-0xfbffffff] [ 0.214377] pci 0000:00:01.0: supports D1 [ 0.214428] pci 0000:00:0b.0: reg 10 32bit mmio: [0xffefe000-0xffefefff] [ 0.214519] pci 0000:00:0f.0: reg 10 io port: [0xd400-0xd407] [ 0.214530] pci 0000:00:0f.0: reg 14 io port: [0xd000-0xd003] [ 0.214541] pci 0000:00:0f.0: reg 18 io port: [0xcc00-0xcc07] [ 0.214552] pci 0000:00:0f.0: reg 1c io port: [0xc800-0xc803] [ 0.214563] pci 0000:00:0f.0: reg 20 io port: [0xc400-0xc40f] [ 0.214573] pci 0000:00:0f.0: reg 24 io port: [0xc000-0xc0ff] [ 0.214676] pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f] [ 0.214792] pci 0000:00:10.0: reg 20 io port: [0xd800-0xd81f] [ 0.214829] pci 0000:00:10.0: supports D1 D2 [ 0.214834] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.214841] pci 0000:00:10.0: PME# disabled [ 0.214914] pci 0000:00:10.1: reg 20 io port: [0xdc00-0xdc1f] [ 0.214958] pci 0000:00:10.1: supports D1 D2 [ 0.214963] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.214972] pci 0000:00:10.1: PME# disabled [ 0.215042] pci 0000:00:10.2: reg 20 io port: [0xe000-0xe01f] [ 0.215080] pci 0000:00:10.2: supports D1 D2 [ 0.215084] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.215091] pci 0000:00:10.2: PME# disabled [ 0.215164] pci 0000:00:10.3: reg 20 io port: [0xec00-0xec1f] [ 0.215202] pci 0000:00:10.3: supports D1 D2 [ 0.215206] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.215213] pci 0000:00:10.3: PME# disabled [ 0.215260] pci 0000:00:10.4: reg 10 32bit mmio: [0xffeff800-0xffeff8ff] [ 0.215319] pci 0000:00:10.4: supports D1 D2 [ 0.215323] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.215330] pci 0000:00:10.4: PME# disabled [ 0.215419] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.215500] pci 0000:00:11.5: reg 10 io port: [0xe400-0xe4ff] [ 0.215568] pci 0000:00:11.5: supports D1 D2 [ 0.215621] pci 0000:00:12.0: reg 10 io port: [0xe800-0xe8ff] [ 0.215632] pci 0000:00:12.0: reg 14 32bit mmio: [0xffeffc00-0xffeffcff] [ 0.215687] pci 0000:00:12.0: supports D1 D2 [ 0.215692] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.215699] pci 0000:00:12.0: PME# disabled [ 0.215782] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff] [ 0.215793] pci 0000:01:00.0: reg 14 io port: [0xb800-0xb8ff] [ 0.215803] pci 0000:01:00.0: reg 18 32bit mmio: [0xffdf0000-0xffdfffff] [ 0.215827] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xffdc0000-0xffddffff] [ 0.215858] pci 0000:01:00.0: supports D1 D2 [ 0.215898] pci 0000:01:00.1: reg 10 32bit mmio pref: [0xe0000000-0xe7ffffff] [ 0.215909] pci 0000:01:00.1: reg 14 32bit mmio: [0xffde0000-0xffdeffff] [ 0.215955] pci 0000:01:00.1: supports D1 D2 [ 0.216040] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff] [ 0.216049] pci 0000:00:01.0: bridge 32bit mmio: [0xffd00000-0xffdfffff] [ 0.216058] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd7f00000-0xf7efffff] [ 0.216073] pci_bus 0000:00: on NUMA node 0 [ 0.216084] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.229418] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) [ 0.229594] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 14 15) [ 0.229770] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 14 15) [ 0.229938] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 11 14 15) [ 0.230109] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.230285] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.230457] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.230628] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.230847] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.230855] vgaarb: loaded [ 0.231084] SCSI subsystem initialized [ 0.231255] libata version 3.00 loaded. [ 0.231397] usbcore: registered new interface driver usbfs [ 0.231426] usbcore: registered new interface driver hub [ 0.231480] usbcore: registered new device driver usb [ 0.231739] ACPI: WMI: Mapper loaded [ 0.231743] PCI: Using ACPI for IRQ routing [ 0.232062] NetLabel: Initializing [ 0.232066] NetLabel: domain hash size = 128 [ 0.232069] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.232093] NetLabel: unlabeled traffic allowed by default [ 0.232185] Switching to clocksource tsc [ 0.235726] AppArmor: AppArmor Filesystem Enabled [ 0.235758] pnp: PnP ACPI init [ 0.235789] ACPI: bus type pnp registered [ 0.242915] pnp: PnP ACPI: found 13 devices [ 0.242920] ACPI: ACPI bus type pnp unregistered [ 0.242928] PnPBIOS: Disabled by ACPI PNP [ 0.242957] system 00:08: ioport range 0x295-0x296 has been reserved [ 0.242966] system 00:08: ioport range 0x3e0-0x3e7 has been reserved [ 0.242973] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.242981] system 00:08: ioport range 0x800-0x87f has been reserved [ 0.242992] system 00:08: ioport range 0x400-0x41f has been reserved [ 0.243008] system 00:09: iomem range 0xfec80000-0xfec800ff has been reserved [ 0.243016] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.243022] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.243028] system 00:09: iomem range 0xfff80000-0xffffffff could not be reserved [ 0.243043] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.243050] system 00:0c: iomem range 0xc0000-0xdffff could not be reserved [ 0.243056] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 0.243062] system 00:0c: iomem range 0x100000-0x3fffffff could not be reserved [ 0.277974] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.277982] pci 0000:00:01.0: IO window: 0xb000-0xbfff [ 0.277991] pci 0000:00:01.0: MEM window: 0xffd00000-0xffdfffff [ 0.277999] pci 0000:00:01.0: PREFETCH window: 0xd7f00000-0xf7efffff [ 0.278026] pci 0000:00:01.0: setting latency timer to 64 [ 0.278034] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.278040] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.278046] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] [ 0.278051] pci_bus 0000:01: resource 1 mem: [0xffd00000-0xffdfffff] [ 0.278056] pci_bus 0000:01: resource 2 pref mem [0xd7f00000-0xf7efffff] [ 0.278129] NET: Registered protocol family 2 [ 0.278323] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.278982] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.279830] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.280294] TCP: Hash tables configured (established 131072 bind 65536) [ 0.280299] TCP reno registered [ 0.280534] NET: Registered protocol family 1 [ 0.280582] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.280693] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message [ 0.280710] pci 0000:01:00.0: Boot video device [ 0.281036] cpufreq-nforce2: No nForce2 chipset. [ 0.281097] Scanning for low memory corruption every 60 seconds [ 0.281324] audit: initializing netlink socket (disabled) [ 0.281342] type=2000 audit(1281735546.279:1): initialized [ 0.293637] highmem bounce pool size: 64 pages [ 0.293648] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.296794] VFS: Disk quotas dquot_6.5.2 [ 0.296936] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.298200] fuse init (API version 7.13) [ 0.298378] msgmni has been set to 1716 [ 0.298812] alg: No test for stdrng (krng) [ 0.298930] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.298936] io scheduler noop registered [ 0.298940] io scheduler anticipatory registered [ 0.298944] io scheduler deadline registered [ 0.299038] io scheduler cfq registered (default) [ 0.299283] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.299331] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.299517] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.299524] ACPI: Power Button [PWRB] [ 0.299633] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.299639] ACPI: Power Button [PWRF] [ 0.300121] processor LNXCPU:00: registered as cooling_device0 [ 0.300193] processor LNXCPU:01: registered as cooling_device1 [ 0.308194] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.308314] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.308988] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.311145] brd: module loaded [ 0.312209] loop: module loaded [ 0.312412] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.312704] alloc irq_desc for 20 on node -1 [ 0.312709] alloc kstat_irqs on node -1 [ 0.312721] pata_acpi 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 0.312789] pata_acpi 0000:00:0f.0: PCI INT B disabled [ 0.312821] pata_acpi 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.312862] pata_acpi 0000:00:0f.1: PCI INT A disabled [ 0.313557] Fixed MDIO Bus: probed [ 0.313633] PPP generic driver version 2.4.2 [ 0.313715] tun: Universal TUN/TAP device driver, 1.6 [ 0.313720] tun: (C) 1999-2004 Max Krasnyansky [ 0.313877] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.313915] alloc irq_desc for 21 on node -1 [ 0.313919] alloc kstat_irqs on node -1 [ 0.313928] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 0.313951] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 0.314015] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 0.314101] ehci_hcd 0000:00:10.4: irq 21, io mem 0xffeff800 [ 0.314193] isapnp: Scanning for PnP cards... [ 0.363351] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 [ 0.363592] usb usb1: configuration #1 chosen from 1 choice [ 0.363661] hub 1-0:1.0: USB hub found [ 0.363678] hub 1-0:1.0: 8 ports detected [ 0.363799] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.363833] alloc irq_desc for 19 on node -1 [ 0.363838] alloc kstat_irqs on node -1 [ 0.363849] ohci_hcd 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.363874] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 0.363944] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 [ 0.363998] ohci_hcd 0000:00:0b.0: irq 19, io mem 0xffefe000 [ 0.453397] usb usb2: configuration #1 chosen from 1 choice [ 0.453463] hub 2-0:1.0: USB hub found [ 0.453480] hub 2-0:1.0: 2 ports detected [ 0.453583] uhci_hcd: USB Universal Host Controller Interface driver [ 0.453667] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 0.453680] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 0.453750] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3 [ 0.453782] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d800 [ 0.453954] usb usb3: configuration #1 chosen from 1 choice [ 0.454015] hub 3-0:1.0: USB hub found [ 0.454035] hub 3-0:1.0: 2 ports detected [ 0.454124] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 0.454134] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 0.454198] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 4 [ 0.454228] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000dc00 [ 0.454399] usb usb4: configuration #1 chosen from 1 choice [ 0.454452] hub 4-0:1.0: USB hub found [ 0.454467] hub 4-0:1.0: 2 ports detected [ 0.454573] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.454583] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 0.454648] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 5 [ 0.454677] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e000 [ 0.454842] usb usb5: configuration #1 chosen from 1 choice [ 0.454897] hub 5-0:1.0: USB hub found [ 0.454911] hub 5-0:1.0: 2 ports detected [ 0.454997] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.455007] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 0.455082] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 6 [ 0.455111] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000ec00 [ 0.455278] usb usb6: configuration #1 chosen from 1 choice [ 0.455331] hub 6-0:1.0: USB hub found [ 0.455343] hub 6-0:1.0: 2 ports detected [ 0.455518] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.455523] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.455774] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.455997] mice: PS/2 mouse device common for all mice [ 0.456224] rtc_cmos 00:02: RTC can wake from S4 [ 0.456301] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.456361] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 0.456592] device-mapper: uevent: version 1.0.3 [ 0.468026] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.503263] Freeing initrd memory: 7787k freed [ 0.510285] device-mapper: multipath: version 1.1.0 loaded [ 0.510293] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.510586] EISA: Probing bus 0 at eisa.0 [ 0.510631] EISA: Detected 0 cards. [ 0.510747] cpuidle: using governor ladder [ 0.510751] cpuidle: using governor menu [ 0.511637] TCP cubic registered [ 0.511895] NET: Registered protocol family 10 [ 0.512769] lo: Disabled Privacy Extensions [ 0.513441] NET: Registered protocol family 17 [ 0.513528] Using IPI No-Shortcut mode [ 0.513689] PM: Resume from disk failed. [ 0.513709] registered taskstats version 1 [ 0.514113] Magic number: 6:350:702 [ 0.514176] pci 0000:00:00.7: hash matches [ 0.514244] rtc_cmos 00:02: setting system clock to 2010-08-13 21:39:06 UTC (1281735546) [ 0.514249] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.514253] EDD information not available. [ 0.524997] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.674387] isapnp: No Plug & Play device found [ 0.674407] Freeing unused kernel memory: 660k freed [ 0.675062] Write protecting the kernel text: 4680k [ 0.675118] Write protecting the kernel read-only data: 1840k [ 0.702092] udev: starting version 151 [ 0.831714] usb 2-2: new low speed USB device using ohci_hcd and address 2 [ 0.912753] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 0.912819] alloc irq_desc for 23 on node -1 [ 0.912824] alloc kstat_irqs on node -1 [ 0.912836] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.914305] eth0: VIA Rhine II at 0xffeffc00, 00:13:8f:87:41:93, IRQ 23. [ 0.915020] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link cde1. [ 0.916354] sata_via 0000:00:0f.0: version 2.4 [ 0.916374] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 0.916425] sata_via 0000:00:0f.0: routed to hard irq line 5 [ 0.916586] scsi0 : sata_via [ 0.916780] scsi1 : sata_via [ 0.916852] ata1: SATA max UDMA/133 cmd 0xd400 ctl 0xd000 bmdma 0xc400 irq 20 [ 0.916858] ata2: SATA max UDMA/133 cmd 0xcc00 ctl 0xc800 bmdma 0xc408 irq 20 [ 0.923014] pata_via 0000:00:0f.1: version 0.3.4 [ 0.923037] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.923305] scsi2 : pata_via [ 0.923440] scsi3 : pata_via [ 0.926130] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 0.926135] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 0.935754] FDC 0 is a post-1991 82077 [ 1.045383] usb 2-2: configuration #1 chosen from 1 choice [ 1.068410] usbcore: registered new interface driver hiddev [ 1.068546] usbcore: registered new interface driver usbhid [ 1.068550] usbhid: v2.6:USB HID core driver [ 1.088439] ata3.00: ATA-7: Maxtor 6Y200P0, YAR41BW0, max UDMA/133 [ 1.088443] ata3.00: 398297088 sectors, multi 16: LBA48 [ 1.104121] ata3.00: configured for UDMA/133 [ 1.119862] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 1.332024] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 1.342959] scsi 2:0:0:0: Direct-Access ATA Maxtor 6Y200P0 YAR4 PQ: 0 ANSI: 5 [ 1.343169] sd 2:0:0:0: [sda] 398297088 512-byte logical blocks: (203 GB/189 GiB) [ 1.343230] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.343270] sd 2:0:0:0: [sda] Write Protect is off [ 1.343277] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.343473] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.343742] sda: sda1 sda2 < sda5 > [ 1.377038] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.504418] ata4.00: ATAPI: _NEC DVD_RW ND-3520AW, 3.07, max UDMA/33 [ 1.520319] ata4.00: configured for UDMA/33 [ 22.816028] ata4: lost interrupt (Status 0x58) [ 22.820011] ata4: drained 32768 bytes to clear DRQ. [ 22.875219] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 22.875225] scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 60 00 [ 22.875240] ata4.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in [ 22.875242] res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [ 22.875245] ata4.00: status: { DRDY } [ 22.875267] ata4: soft resetting link [ 23.052340] ata4.00: configured for UDMA/33 [ 23.053120] ata4: EH complete [ 43.816034] ata4: lost interrupt (Status 0x58) [ 43.820011] ata4: drained 32768 bytes to clear DRQ. [ 43.875232] ata4.00: limiting speed to UDMA/25:PIO4 [ 43.875237] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 43.875243] scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 60 00 [ 43.875259] ata4.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in [ 43.875260] res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [ 43.875264] ata4.00: status: { DRDY } [ 43.875290] ata4: soft resetting link [ 44.052308] ata4.00: configured for UDMA/25 [ 44.053454] ata4: EH complete [ 64.816033] ata4: lost interrupt (Status 0x58) [ 64.820011] ata4: drained 32768 bytes to clear DRQ. [ 64.875229] ata4.00: limiting speed to PIO4 [ 64.875235] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 64.875241] scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 60 00 [ 64.875257] ata4.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in [ 64.875258] res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [ 64.875262] ata4.00: status: { DRDY } [ 64.875289] ata4: soft resetting link [ 65.052308] ata4.00: configured for PIO4 [ 65.052719] ata4: EH complete [ 65.053544] scsi 3:0:0:0: CD-ROM _NEC DVD_RW ND-3520AW 3.07 PQ: 0 ANSI: 5 [ 65.055361] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 65.055365] Uniform CD-ROM driver Revision: 3.20 [ 65.055514] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 65.055615] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 65.072448] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2:1.0/input/input4 [ 65.072575] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:0b.0-2/input0 [ 65.082087] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor [ 65.083053] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2:1.1/input/input5 [ 65.083285] logitech 0003:046D:C517.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:0b.0-2/input1 [ 66.570747] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 75.781289] udev: starting version 151 [ 75.831129] Adding 3001336k swap on /dev/sda5. Priority:-1 extents:1 across:3001336k [ 75.941846] lp: driver loaded but no devices found [ 76.058680] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 76.060941] Linux agpgart interface v0.103 [ 76.208053] vga16fb: initializing [ 76.208060] vga16fb: mapped to 0xc00a0000 [ 76.208200] fb0: VGA16 VGA frame buffer device [ 76.208782] agpgart: Detected VIA PT880 chipset [ 76.284335] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 [ 76.296526] parport_pc 00:06: reported by Plug and Play ACPI [ 76.296651] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 76.338495] type=1505 audit(1281735622.321:2): operation="profile_load" pid=639 name="/sbin/dhclient3" [ 76.339281] ppdev: user-space parallel port driver [ 76.339305] type=1505 audit(1281735622.321:3): operation="profile_load" pid=639 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 76.339793] type=1505 audit(1281735622.321:4): operation="profile_load" pid=639 name="/usr/lib/connman/scripts/dhclient-script" [ 76.392377] lp0: using parport0 (interrupt-driven). [ 76.465008] gameport: NS558 PnP Gameport is pnp00:07/gameport0, io 0x200, speed 852kHz [ 76.603230] Console: switching to colour frame buffer device 80x30 [ 76.732318] alloc irq_desc for 22 on node -1 [ 76.732326] alloc kstat_irqs on node -1 [ 76.732340] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 76.732524] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 76.793745] type=1505 audit(1281735622.777:5): operation="profile_load" pid=775 name="/usr/share/gdm/guest-session/Xsession" [ 76.797391] type=1505 audit(1281735622.781:6): operation="profile_replace" pid=777 name="/sbin/dhclient3" [ 76.798278] type=1505 audit(1281735622.781:7): operation="profile_replace" pid=777 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 76.798769] type=1505 audit(1281735622.781:8): operation="profile_replace" pid=777 name="/usr/lib/connman/scripts/dhclient-script" [ 76.805735] type=1505 audit(1281735622.789:9): operation="profile_load" pid=779 name="/usr/bin/evince" [ 76.816442] type=1505 audit(1281735622.801:10): operation="profile_load" pid=779 name="/usr/bin/evince-previewer" [ 76.826126] type=1505 audit(1281735622.809:11): operation="profile_load" pid=779 name="/usr/bin/evince-thumbnailer" [ 76.951331] eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1 [ 77.679606] alloc irq_desc for 16 on node -1 [ 77.679614] alloc kstat_irqs on node -1 [ 77.679629] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 77.739741] CPU0 attaching NULL sched-domain. [ 77.739751] CPU1 attaching NULL sched-domain. [ 77.750537] [drm] Initialized drm 1.1.0 20060810 [ 77.799052] [drm] radeon defaulting to kernel modesetting. [ 77.799057] [drm] radeon kernel modesetting enabled. [ 77.801914] [drm] radeon: Initializing kernel modesetting. [ 77.802086] [drm] register mmio base: 0xFFDF0000 [ 77.802091] [drm] register mmio size: 65536 [ 77.804726] [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [ 77.804761] [drm] Generation 2 PCI interface, using max accessible memory [ 77.804780] agpgart-via 0000:00:00.0: AGP 3.5 bridge [ 77.804815] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode [ 77.804941] radeon 0000:01:00.0: putting AGP V3 device into 8x mode [ 77.804961] [drm] radeon: VRAM 128M [ 77.804966] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF [ 77.804970] [drm] radeon: GTT 64M [ 77.804973] [drm] radeon: GTT from 0xF8000000 to 0xFBFFFFFF [ 77.805047] [drm] radeon: irq initialized. [ 77.805476] [drm] Detected VRAM RAM=128M, BAR=128M [ 77.805483] [drm] RAM width 64bits DDR [ 77.805712] [TTM] Zone kernel: Available graphics memory: 443594 kiB. [ 77.805720] [TTM] Zone highmem: Available graphics memory: 512814 kiB. [ 77.805751] [drm] radeon: 128M of VRAM memory ready [ 77.805756] [drm] radeon: 64M of GTT memory ready. [ 77.806014] [drm] radeon: cp idle (0x02000603) [ 77.806093] [drm] Loading R200 Microcode [ 77.806101] platform radeon_cp.0: firmware: requesting radeon/R200_cp.bin [ 77.810477] CPU0 attaching sched-domain: [ 77.810483] domain 0: span 0-1 level SIBLING [ 77.810487] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 77.810497] domain 1: span 0-1 level MC [ 77.810500] groups: 0-1 (cpu_power = 1178) [ 77.810509] CPU1 attaching sched-domain: [ 77.810512] domain 0: span 0-1 level SIBLING [ 77.810515] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 77.810523] domain 1: span 0-1 level MC [ 77.810526] groups: 0-1 (cpu_power = 1178) [ 77.826553] [drm] radeon: ring at 0x00000000F8000000 [ 77.826578] [drm] ring test succeeded in 0 usecs [ 77.834778] [drm] radeon: ib pool ready. [ 77.834926] [drm] ib test succeeded in 0 usecs [ 77.835108] [drm] Default TV standard: PAL [ 77.835112] [drm] 27.000000000 MHz TV ref clk [ 77.835118] [drm] Default TV standard: PAL [ 77.835121] [drm] 27.000000000 MHz TV ref clk [ 77.835176] [drm] Radeon Display Connectors [ 77.835181] [drm] Connector 0: [ 77.835184] [drm] VGA [ 77.835190] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 77.835193] [drm] Encoders: [ 77.835197] [drm] CRT1: INTERNAL_DAC1 [ 77.835202] [drm] Connector 1: [ 77.835205] [drm] S-video [ 77.835208] [drm] Encoders: [ 77.835211] [drm] TV1: INTERNAL_DAC2 [ 77.971194] [drm] fb mappable at 0xE8040000 [ 77.971198] [drm] vram apper at 0xE8000000 [ 77.971201] [drm] size 5242880 [ 77.971203] [drm] fb depth is 24 [ 77.971205] [drm] pitch is 5120 [ 77.971460] fb1: radeondrmfb frame buffer device [ 77.971465] registered panic notifier [ 77.971476] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 [ 80.521862] CPU0 attaching NULL sched-domain. [ 80.521873] CPU1 attaching NULL sched-domain. [ 80.549146] CPU0 attaching sched-domain: [ 80.549152] domain 0: span 0-1 level SIBLING [ 80.549156] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 80.549165] domain 1: span 0-1 level MC [ 80.549169] groups: 0-1 (cpu_power = 1178) [ 80.549177] CPU1 attaching sched-domain: [ 80.549180] domain 0: span 0-1 level SIBLING [ 80.549183] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 80.549191] domain 1: span 0-1 level MC [ 80.549194] groups: 0-1 (cpu_power = 1178) [ 97.162381] UDF-fs: Partition marked readonly; forcing readonly mount [ 97.269375] UDF-fs INFO UDF: Mounting volume '7ème Compagnie DVD 1', timestamp 2036/02/07 03:58 (1078) [ 118.870082] __ratelimit: 9 callbacks suppressed [ 118.870098] software-center[1513]: segfault at ffa6d0d0 ip 0054d0cc sp bfa6d060 error 4 in libcairo.so.2.10800.10[53e000+77000] [ 142.484522] software-center[1544]: segfault at ffbd9620 ip 008878b9 sp bfbd9600 error 4 in libgobject-2.0.so.0.2400.1[87e000+3d000] [ 311.409080] software-center[1575]: segfault at 1 ip 011dbf42 sp bf9507ac error 4 in _gtk.so[11cc000+19000] [ 311.438075] software-center[1576]: segfault at 1 ip 011dbf42 sp bf95088c error 4 in _gtk.so[11cc000+19000] [ 319.588923] software-center[1592]: segfault at 1 ip 011dbf42 sp bf95170c error 4 in _gtk.so[11cc000+19000] [ 319.900581] software-center[1603]: segfault at 1 ip 011dbf42 sp bf95170c error 4 in _gtk.so[11cc000+19000] [ 330.337972] software-center[1659]: segfault at 1 ip 011dbf42 sp bf95170c error 4 in _gtk.so[11cc000+19000]