[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CEFFF write-protect [ 0.000000] CF000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] modified: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 2f89c000 - 3003326c [ 0.000000] ACPI: RSDP 000f6580 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 3fff3000 0002C (v01 GBT AWRDACPI 42302E31 AWRD 01010101) [ 0.000000] ACPI: FACP 3fff3040 00074 (v01 GBT AWRDACPI 42302E31 AWRD 01010101) [ 0.000000] ACPI: DSDT 3fff30c0 038C3 (v01 GBT AWRDACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 3fff0000 00040 [ 0.000000] ACPI: APIC 3fff69c0 00068 (v01 GBT AWRDACPI 42302E31 AWRD 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98] [ 0.000000] #4 [002f89c000 - 003003326c] RAMDISK ==> [002f89c000 - 003003326c] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [00008da000 - 00008dd092] BRK ==> [00008da000 - 00008dd092] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00f4aa0] f4aa0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003fff0 [ 0.000000] On node 0 totalpages: 262027 [ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1001000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 272 pages used for memmap [ 0.000000] HighMem zone: 34530 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s36024 r0 d21320 u2097152 [ 0.000000] pcpu-alloc: s36024 r0 d21320 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259979 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-21-generic root=UUID=58746110-d290-438e-af6d-f6a143d021b3 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5242560 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003fff0) [ 0.000000] Memory: 1017340k/1048512k available (4673k kernel code, 30104k reserved, 2122k data, 656k init, 139208k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB) [ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB) [ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1716.699 MHz processor. [ 0.008010] Calibrating delay loop (skipped), value calculated using timer frequency.. 3433.39 BogoMIPS (lpj=6866796) [ 0.008048] Security Framework initialized [ 0.008092] AppArmor: AppArmor initialized [ 0.008108] Mount-cache hash table entries: 512 [ 0.008392] Initializing cgroup subsys ns [ 0.008403] Initializing cgroup subsys cpuacct [ 0.008412] Initializing cgroup subsys memory [ 0.008429] Initializing cgroup subsys devices [ 0.008434] Initializing cgroup subsys freezer [ 0.008440] Initializing cgroup subsys net_cls [ 0.008485] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.008493] CPU: L2 cache: 256K [ 0.008497] CPU: Hyper-Threading is disabled [ 0.008505] mce: CPU supports 4 MCE banks [ 0.008525] CPU0: Thermal monitoring enabled (TM1) [ 0.008550] Performance Events: no PMU driver, software events only. [ 0.008564] Checking 'hlt' instruction... OK. [ 0.025527] SMP alternatives: switching to UP code [ 0.043310] ACPI: Core revision 20090903 [ 0.055286] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.055300] ftrace: allocating 21771 entries in 43 pages [ 0.060158] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.060486] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.100174] CPU0: Intel(R) Pentium(R) 4 CPU 1.70GHz stepping 02 [ 0.104001] Brought up 1 CPUs [ 0.104001] Total of 1 processors activated (3433.39 BogoMIPS). [ 0.104001] CPU0 attaching NULL sched-domain. [ 0.104001] devtmpfs: initialized [ 0.104001] regulator: core version 0.5 [ 0.104001] Time: 19:32:06 Date: 08/12/10 [ 0.104001] NET: Registered protocol family 16 [ 0.104001] EISA bus registered [ 0.104001] ACPI: bus type pci registered [ 0.128506] PCI: PCI BIOS revision 2.10 entry at 0xfa090, last bus=2 [ 0.128512] PCI: Using configuration type 1 for base access [ 0.130649] bio: create slab at 0 [ 0.131606] ACPI: EC: Look up EC in DSDT [ 0.139604] ACPI: Interpreter enabled [ 0.139619] ACPI: (supports S0 S1 S4 S5) [ 0.139667] ACPI: Using IOAPIC for interrupt routing [ 0.147535] ACPI: No dock devices found. [ 0.147729] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.147817] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xe7ffffff] [ 0.148018] pci 0000:00:1d.0: reg 20 io port: [0xd800-0xd81f] [ 0.148094] pci 0000:00:1d.1: reg 20 io port: [0xd000-0xd01f] [ 0.148169] pci 0000:00:1d.2: reg 20 io port: [0xd400-0xd41f] [ 0.148242] pci 0000:00:1d.7: reg 10 32bit mmio: [0xeb000000-0xeb0003ff] [ 0.148310] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.148318] pci 0000:00:1d.7: PME# disabled [ 0.148385] * The chipset may have PM-Timer Bug. Due to workarounds for a bug, [ 0.148388] * this clock source is slow. If you are sure your timer does not have [ 0.148390] * this bug, please use "acpi_pm_good" to disable the workaround [ 0.148448] pci 0000:00:1f.0: quirk: region 4000-407f claimed by ICH4 ACPI/GPIO/TCO [ 0.148454] pci 0000:00:1f.0: quirk: region 4080-40bf claimed by ICH4 GPIO [ 0.148489] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.148500] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.148510] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.148520] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.148531] pci 0000:00:1f.1: reg 20 io port: [0xf000-0xf00f] [ 0.148541] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] [ 0.148612] pci 0000:00:1f.3: reg 20 io port: [0x5000-0x501f] [ 0.148673] pci 0000:00:1f.5: reg 10 io port: [0xe000-0xe0ff] [ 0.148683] pci 0000:00:1f.5: reg 14 io port: [0xe400-0xe43f] [ 0.148694] pci 0000:00:1f.5: reg 18 32bit mmio: [0xeb001000-0xeb0011ff] [ 0.148704] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xeb002000-0xeb0020ff] [ 0.148745] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.148752] pci 0000:00:1f.5: PME# disabled [ 0.148870] pci 0000:02:00.0: reg 10 32bit mmio: [0xe8000000-0xe8ffffff] [ 0.148882] pci 0000:02:00.0: reg 14 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.148915] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.148984] pci 0000:02:02.0: reg 10 io port: [0xc000-0xc0ff] [ 0.148995] pci 0000:02:02.0: reg 14 32bit mmio: [0xea000000-0xea0000ff] [ 0.149028] pci 0000:02:02.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.149055] pci 0000:02:02.0: PME# supported from D0 [ 0.149061] pci 0000:02:02.0: PME# disabled [ 0.149114] pci 0000:00:1e.0: transparent bridge [ 0.149122] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff] [ 0.149129] pci 0000:00:1e.0: bridge 32bit mmio: [0xe8000000-0xeaffffff] [ 0.149137] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.149154] pci_bus 0000:00: on NUMA node 0 [ 0.149167] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.149385] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.179667] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.179862] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.180072] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.180265] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.180452] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.180645] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.180834] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.181024] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.181284] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.181292] vgaarb: loaded [ 0.181545] SCSI subsystem initialized [ 0.181699] libata version 3.00 loaded. [ 0.181877] usbcore: registered new interface driver usbfs [ 0.181903] usbcore: registered new interface driver hub [ 0.181967] usbcore: registered new device driver usb [ 0.182281] ACPI: WMI: Mapper loaded [ 0.182287] PCI: Using ACPI for IRQ routing [ 0.182555] NetLabel: Initializing [ 0.182560] NetLabel: domain hash size = 128 [ 0.182563] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.182589] NetLabel: unlabeled traffic allowed by default [ 0.182674] Switching to clocksource tsc [ 0.184001] AppArmor: AppArmor Filesystem Enabled [ 0.184001] pnp: PnP ACPI init [ 0.184001] ACPI: bus type pnp registered [ 0.189837] pnp: PnP ACPI: found 13 devices [ 0.189844] ACPI: ACPI bus type pnp unregistered [ 0.189853] PnPBIOS: Disabled by ACPI PNP [ 0.189885] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.189893] system 00:01: ioport range 0x290-0x29f has been reserved [ 0.189899] system 00:01: ioport range 0x800-0x805 has been reserved [ 0.224866] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.224871] pci 0000:00:01.0: IO window: disabled [ 0.224878] pci 0000:00:01.0: MEM window: disabled [ 0.224883] pci 0000:00:01.0: PREFETCH window: disabled [ 0.224897] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.224904] pci 0000:00:1e.0: IO window: 0xc000-0xcfff [ 0.224913] pci 0000:00:1e.0: MEM window: 0xe8000000-0xeaffffff [ 0.224920] pci 0000:00:1e.0: PREFETCH window: 0xd0000000-0xdfffffff [ 0.224948] pci 0000:00:1e.0: setting latency timer to 64 [ 0.224958] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.224963] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.224969] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff] [ 0.224974] pci_bus 0000:02: resource 1 mem: [0xe8000000-0xeaffffff] [ 0.224979] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.224984] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.224989] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.225061] NET: Registered protocol family 2 [ 0.225277] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.226013] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.227674] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.228619] TCP: Hash tables configured (established 131072 bind 65536) [ 0.228626] TCP reno registered [ 0.228885] NET: Registered protocol family 1 [ 0.229044] pci 0000:02:00.0: Boot video device [ 0.229418] cpufreq-nforce2: No nForce2 chipset. [ 0.229476] Scanning for low memory corruption every 60 seconds [ 0.229717] audit: initializing netlink socket (disabled) [ 0.229741] type=2000 audit(1281641525.229:1): initialized [ 0.242146] Trying to unpack rootfs image as initramfs... [ 0.258061] highmem bounce pool size: 64 pages [ 0.258074] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.261169] VFS: Disk quotas dquot_6.5.2 [ 0.261354] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.265887] fuse init (API version 7.13) [ 0.266148] msgmni has been set to 1716 [ 0.269401] alg: No test for stdrng (krng) [ 0.269634] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.269642] io scheduler noop registered [ 0.269646] io scheduler anticipatory registered [ 0.269650] io scheduler deadline registered [ 0.269741] io scheduler cfq registered (default) [ 0.269947] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.269998] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.270181] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.270189] ACPI: Power Button [PWRB] [ 0.270284] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.270296] ACPI: Sleep Button [SLPB] [ 0.270409] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.270416] ACPI: Power Button [PWRF] [ 0.270945] processor LNXCPU:00: registered as cooling_device0 [ 0.280243] isapnp: Scanning for PnP cards... [ 0.286209] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.286344] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.286502] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.287072] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.287304] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.293943] brd: module loaded [ 0.294924] loop: module loaded [ 0.295159] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.295402] ata_piix 0000:00:1f.1: version 2.13 [ 0.295434] alloc irq_desc for 18 on node -1 [ 0.295440] alloc kstat_irqs on node -1 [ 0.295453] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.295534] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.341740] scsi0 : ata_piix [ 0.342037] scsi1 : ata_piix [ 0.343455] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.343463] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.344267] Fixed MDIO Bus: probed [ 0.344345] PPP generic driver version 2.4.2 [ 0.344481] tun: Universal TUN/TAP device driver, 1.6 [ 0.344486] tun: (C) 1999-2004 Max Krasnyansky [ 0.344687] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.344740] alloc irq_desc for 23 on node -1 [ 0.344746] alloc kstat_irqs on node -1 [ 0.344760] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.344789] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.344796] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.344879] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.348836] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported [ 0.357662] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xeb000000 [ 0.377611] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.377890] usb usb1: configuration #1 chosen from 1 choice [ 0.377955] hub 1-0:1.0: USB hub found [ 0.377988] hub 1-0:1.0: 6 ports detected [ 0.378114] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.378148] uhci_hcd: USB Universal Host Controller Interface driver [ 0.378238] alloc irq_desc for 16 on node -1 [ 0.378244] alloc kstat_irqs on node -1 [ 0.378258] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.378276] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.378283] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.378394] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.378446] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000d800 [ 0.378659] usb usb2: configuration #1 chosen from 1 choice [ 0.378724] hub 2-0:1.0: USB hub found [ 0.378742] hub 2-0:1.0: 2 ports detected [ 0.378830] alloc irq_desc for 19 on node -1 [ 0.378835] alloc kstat_irqs on node -1 [ 0.378848] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.378861] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.378866] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.378959] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.379007] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d000 [ 0.379214] usb usb3: configuration #1 chosen from 1 choice [ 0.379274] hub 3-0:1.0: USB hub found [ 0.379292] hub 3-0:1.0: 2 ports detected [ 0.379384] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.379399] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.379405] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.379509] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.379561] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400 [ 0.379791] usb usb4: configuration #1 chosen from 1 choice [ 0.379852] hub 4-0:1.0: USB hub found [ 0.379872] hub 4-0:1.0: 2 ports detected [ 0.380076] PNP: No PS/2 controller found. Probing ports directly. [ 0.387515] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.387535] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.387896] mice: PS/2 mouse device common for all mice [ 0.388207] rtc_cmos 00:03: RTC can wake from S4 [ 0.388318] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.388355] rtc0: alarms up to one month, 242 bytes nvram [ 0.388614] device-mapper: uevent: version 1.0.3 [ 0.394227] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.394403] device-mapper: multipath: version 1.1.0 loaded [ 0.394411] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.394687] EISA: Probing bus 0 at eisa.0 [ 0.394713] Cannot allocate resource for EISA slot 4 [ 0.394718] Cannot allocate resource for EISA slot 5 [ 0.394734] EISA: Detected 0 cards. [ 0.397954] cpuidle: using governor ladder [ 0.397961] cpuidle: using governor menu [ 0.398955] TCP cubic registered [ 0.399246] NET: Registered protocol family 10 [ 0.400177] lo: Disabled Privacy Extensions [ 0.400797] NET: Registered protocol family 17 [ 0.400919] Using IPI No-Shortcut mode [ 0.401138] PM: Resume from disk failed. [ 0.401166] registered taskstats version 1 [ 0.401509] Magic number: 6:407:546 [ 0.401574] mem null: hash matches [ 0.401639] rtc_cmos 00:03: setting system clock to 2010-08-12 19:32:06 UTC (1281641526) [ 0.401646] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.401650] EDD information not available. [ 0.721767] ata1.00: HPA unlocked: 160084415 -> 160086528, native 160086528 [ 0.721780] ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133 [ 0.721786] ata1.00: 160086528 sectors, multi 16: LBA [ 0.721858] ata1.01: ATAPI: SONY DVD RW DW-Q28A, KYS3, max UDMA/66 [ 0.738266] ata1.00: configured for UDMA/100 [ 0.753937] ata1.01: configured for UDMA/66 [ 0.893005] usb 1-5: new high speed USB device using ehci_hcd and address 3 [ 0.981297] isapnp: No Plug & Play device found [ 0.981812] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5 [ 0.982143] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.984250] scsi 0:0:1:0: CD-ROM SONY DVD RW DW-Q28A KYS3 PQ: 0 ANSI: 5 [ 0.991919] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 0.991929] Uniform CD-ROM driver Revision: 3.20 [ 0.992191] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 0.992356] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 0.992582] sd 0:0:0:0: [sda] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB) [ 0.992687] sd 0:0:0:0: [sda] Write Protect is off [ 0.992693] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.992742] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.993055] sda: sda1 sda2 < sda5 sda6 sda7 > [ 1.044263] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.059337] usb 1-5: configuration #1 chosen from 1 choice [ 1.059536] hub 1-5:1.0: USB hub found [ 1.060346] hub 1-5:1.0: 4 ports detected [ 1.067830] Freeing initrd memory: 7772k freed [ 1.082564] Freeing unused kernel memory: 656k freed [ 1.083895] Write protecting the kernel text: 4676k [ 1.083960] Write protecting the kernel read-only data: 1840k [ 1.136916] udev: starting version 151 [ 1.416269] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 1.538560] Floppy drive(s): fd0 is 1.44M [ 1.557592] FDC 0 is a post-1991 82077 [ 1.591251] usb 3-1: configuration #1 chosen from 1 choice [ 1.599233] hub 3-1:1.0: USB hub found [ 1.600109] hub 3-1:1.0: 3 ports detected [ 1.647761] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 1.647774] via-rhine: Broken BIOS detected, avoid_D3 enabled. [ 1.647836] alloc irq_desc for 22 on node -1 [ 1.647841] alloc kstat_irqs on node -1 [ 1.647855] via-rhine 0000:02:02.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.672741] eth0: VIA Rhine II at 0xea000000, 00:05:5d:03:64:30, IRQ 22. [ 1.673450] eth0: MII PHY found at address 8, status 0x782d advertising 01e1 Link 45e1. [ 1.844053] usb 4-2: new full speed USB device using uhci_hcd and address 2 [ 1.959941] kjournald starting. Commit interval 5 seconds [ 1.959970] EXT3-fs: mounted filesystem with ordered data mode. [ 2.045763] usb 4-2: configuration #1 chosen from 1 choice [ 2.122002] usb 3-1.1: new full speed USB device using uhci_hcd and address 3 [ 2.259200] usb 3-1.1: configuration #1 chosen from 1 choice [ 2.341989] usb 3-1.3: new low speed USB device using uhci_hcd and address 4 [ 2.480197] usb 3-1.3: configuration #1 chosen from 1 choice [ 3.650421] Adding 4883720k swap on /dev/sda6. Priority:-1 extents:1 across:4883720k [ 3.964551] udev: starting version 151 [ 4.855981] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.978738] lp: driver loaded but no devices found [ 5.237455] usbcore: registered new interface driver hiddev [ 5.243943] input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.1/3-1.1:1.0/input/input4 [ 5.246292] generic-usb 0003:413C:2010.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard Hub] on usb-0000:00:1d.1-1.1/input0 [ 5.257916] input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.1/3-1.1:1.1/input/input5 [ 5.266644] generic-usb 0003:413C:2010.0002: input,hidraw1: USB HID v1.10 Device [Dell Dell USB Keyboard Hub] on usb-0000:00:1d.1-1.1/input1 [ 5.275889] Linux video capture interface: v2.00 [ 5.286811] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3:1.0/input/input6 [ 5.289060] generic-usb 0003:046D:C016.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-1.3/input0 [ 5.289240] usbcore: registered new interface driver usbhid [ 5.289871] usbhid: v2.6:USB HID core driver [ 5.303356] parport_pc 00:09: reported by Plug and Play ACPI [ 5.303410] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 5.367106] gameport: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x201, speed 817kHz [ 5.396404] lp0: using parport0 (interrupt-driven). [ 5.605161] Linux agpgart interface v0.103 [ 5.614907] ppdev: user-space parallel port driver [ 5.615883] intel_rng: FWH not detected [ 5.627649] agpgart-intel 0000:00:00.0: Intel 845G Chipset [ 5.669802] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000 [ 5.738241] gspca: main v2.7.0 registered [ 5.857498] gspca: probing 0ac8:303b [ 5.933949] [drm] Initialized drm 1.1.0 20060810 [ 6.106076] nouveau 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 6.113309] [drm] nouveau 0000:02:00.0: Detected an NV30 generation card (0x034200b1) [ 6.113526] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PROM [ 6.371109] [drm] nouveau 0000:02:00.0: ... appears to be valid [ 6.371304] [drm] nouveau 0000:02:00.0: BMP BIOS found [ 6.371310] [drm] nouveau 0000:02:00.0: BMP version 5.40 [ 6.371315] [drm] nouveau 0000:02:00.0: Bios version 04.34.20.56 [ 6.371321] [drm] nouveau 0000:02:00.0: Found Display Configuration Block version 2.2 [ 6.371328] [drm] nouveau 0000:02:00.0: Raw DCB entry 0: 01000300 000088b8 [ 6.371335] [drm] nouveau 0000:02:00.0: Raw DCB entry 1: 02010310 000088b8 [ 6.371340] [drm] nouveau 0000:02:00.0: Raw DCB entry 2: 01010312 00000000 [ 6.371345] [drm] nouveau 0000:02:00.0: Raw DCB entry 3: 02020321 00000333 [ 6.371493] [drm] nouveau 0000:02:00.0: Loading NV17 power sequencing microcode [ 6.371501] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xEC7A [ 6.396077] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xEF15 [ 6.396096] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xF05B [ 6.396165] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xF1ED [ 6.396174] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xF20A [ 6.396184] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 5 at offset 0xF227 [ 6.404399] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 6 at offset 0xF3B7 [ 6.433694] [TTM] Zone kernel: Available graphics memory: 443612 kiB. [ 6.433702] [TTM] Zone highmem: Available graphics memory: 513216 kiB. [ 6.433728] [drm] nouveau 0000:02:00.0: 256 MiB VRAM [ 6.437686] [drm] nouveau 0000:02:00.0: 64 MiB GART (aperture) [ 6.438019] [drm] nouveau 0000:02:00.0: Allocating FIFO number 0 [ 6.438894] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 0 [ 6.438911] [drm] nouveau 0000:02:00.0: Initial CRTC_OWNER is 0 [ 6.438924] [drm] nouveau 0000:02:00.0: Saving VGA fonts [ 6.511471] [drm] nouveau 0000:02:00.0: Detected a VGA connector [ 6.512156] [drm] nouveau 0000:02:00.0: Detected a DVI-I connector [ 6.512656] [drm] nouveau 0000:02:00.0: Detected a TV connector [ 6.515381] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 6.515391] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on vga encoder (output 1) [ 6.515398] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on tmds encoder (output 2) [ 6.515405] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on TV encoder (output 3) [ 6.700046] [drm] nouveau 0000:02:00.0: Load detected on output B [ 6.700479] [drm] nouveau 0000:02:00.0: allocated 1280x1024 fb: 0x49000, bo eddbca00 [ 6.700951] fb0: nouveaufb frame buffer device [ 6.700957] registered panic notifier [ 6.700973] [drm] Initialized nouveau 0.0.15 20090420 for 0000:02:00.0 on minor 0 [ 6.711600] zc3xx: probe sensor -> 000a [ 6.711609] zc3xx: Find Sensor PB0330. Chip revision 0 [ 6.715501] gspca: probe ok [ 6.715557] usbcore: registered new interface driver zc3xx [ 6.715563] zc3xx: registered [ 7.285158] vga16fb: initializing [ 7.285171] vga16fb: mapped to 0xc00a0000 [ 7.285180] vga16fb: not registering due to another framebuffer present [ 7.350091] type=1505 audit(1281641533.447:2): operation="profile_load" pid=495 name="/sbin/dhclient3" [ 7.350960] type=1505 audit(1281641533.447:3): operation="profile_load" pid=495 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 7.351420] type=1505 audit(1281641533.447:4): operation="profile_load" pid=495 name="/usr/lib/connman/scripts/dhclient-script" [ 7.966576] alloc irq_desc for 17 on node -1 [ 7.966583] alloc kstat_irqs on node -1 [ 7.966597] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 7.966665] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 8.127170] [drm] nouveau 0000:02:00.0: Output DVI-I-1 is running on CRTC 0 using output A [ 8.127180] [drm] nouveau 0000:02:00.0: 0xE085: Parsing digital output script table [ 8.180102] [drm] nouveau 0000:02:00.0: Setting dpms mode 0 on tmds encoder (output 2) [ 8.180112] [drm] nouveau 0000:02:00.0: Output DVI-I-1 is running on CRTC 0 using output A [ 8.190729] [drm] nouveau 0000:02:00.0: Setting dpms mode 0 on TV encoder (output 3) [ 8.190742] [drm] nouveau 0000:02:00.0: Output TV-1 is running on CRTC 1 using output B [ 8.202505] Console: switching to colour frame buffer device 90x36 [ 8.296039] intel8x0_measure_ac97_clock: measured 54838 usecs (2642 samples) [ 8.296047] intel8x0: clocking to 48000 [ 105.890046] EXT3-fs warning: mounting fs with errors, running e2fsck is recommended [ 105.896461] EXT3 FS on sda5, internal journal [ 106.077228] kjournald starting. Commit interval 5 seconds [ 106.077713] EXT3 FS on sda1, internal journal [ 106.077725] EXT3-fs: mounted filesystem with ordered data mode. [ 106.151699] kjournald starting. Commit interval 5 seconds [ 106.152290] EXT3 FS on sda7, internal journal [ 106.152305] EXT3-fs: mounted filesystem with ordered data mode. [ 106.896320] type=1505 audit(1281641632.994:5): operation="profile_load" pid=961 name="/usr/share/gdm/guest-session/Xsession" [ 106.902178] type=1505 audit(1281641632.998:6): operation="profile_replace" pid=967 name="/sbin/dhclient3" [ 106.903076] type=1505 audit(1281641632.998:7): operation="profile_replace" pid=967 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 106.903562] type=1505 audit(1281641632.998:8): operation="profile_replace" pid=967 name="/usr/lib/connman/scripts/dhclient-script" [ 107.110478] type=1505 audit(1281641633.206:9): operation="profile_load" pid=968 name="/usr/bin/evince" [ 107.127880] type=1505 audit(1281641633.222:10): operation="profile_load" pid=968 name="/usr/bin/evince-previewer" [ 107.136577] type=1505 audit(1281641633.234:11): operation="profile_load" pid=968 name="/usr/bin/evince-thumbnailer" [ 107.227646] type=1505 audit(1281641633.322:12): operation="profile_load" pid=974 name="/usr/lib/cups/backend/cups-pdf" [ 107.229173] type=1505 audit(1281641633.326:13): operation="profile_load" pid=974 name="/usr/sbin/cupsd" [ 107.370032] type=1505 audit(1281641633.466:14): operation="profile_load" pid=975 name="/usr/sbin/tcpdump" [ 107.758240] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 109.444235] [drm] nouveau 0000:02:00.0: Load detected on output B [ 109.656102] [drm] nouveau 0000:02:00.0: Load detected on output B [ 109.685809] [drm] nouveau 0000:02:00.0: Allocating FIFO number 1 [ 109.686608] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 109.851061] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on tmds encoder (output 2) [ 109.871311] [drm] nouveau 0000:02:00.0: Output DVI-I-1 is running on CRTC 0 using output A [ 109.871321] [drm] nouveau 0000:02:00.0: 0xE085: Parsing digital output script table [ 109.924055] [drm] nouveau 0000:02:00.0: Setting dpms mode 0 on tmds encoder (output 2) [ 109.924066] [drm] nouveau 0000:02:00.0: Output DVI-I-1 is running on CRTC 0 using output A [ 109.924466] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on TV encoder (output 3) [ 109.944772] [drm] nouveau 0000:02:00.0: Setting dpms mode 0 on TV encoder (output 3) [ 109.944788] [drm] nouveau 0000:02:00.0: Output TV-1 is running on CRTC 1 using output B [ 112.464029] [drm] nouveau 0000:02:00.0: Load detected on output B [ 112.764028] [drm] nouveau 0000:02:00.0: Load detected on output B [ 113.092028] [drm] nouveau 0000:02:00.0: Load detected on output B [ 118.556040] eth0: no IPv6 routers present [ 137.596028] [drm] nouveau 0000:02:00.0: Load detected on output B [ 137.896028] [drm] nouveau 0000:02:00.0: Load detected on output B [ 138.200028] [drm] nouveau 0000:02:00.0: Load detected on output B [ 148.616897] [drm] nouveau 0000:02:00.0: Load detected on output B [ 156.285206] end_request: I/O error, dev fd0, sector 0 [ 168.477510] end_request: I/O error, dev fd0, sector 0