[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) [ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data) [ 0.000000] BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved) [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x1fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 base 0D0000000 mask FF8000000 write-combining [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000001fff0000 (usable) [ 0.000000] modified: 000000001fff0000 - 000000001fff8000 (ACPI data) [ 0.000000] modified: 000000001fff8000 - 0000000020000000 (ACPI NVS) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffee0000 - 00000000fff00000 (reserved) [ 0.000000] modified: 00000000fffc0000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-000000001fff0000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 001fc00000 page 2M [ 0.000000] 001fc00000 - 001fff0000 page 4k [ 0.000000] kernel direct mapping tables up to 1fff0000 @ 10000-15000 [ 0.000000] RAMDISK: 1f6d1000 - 1ffbf970 [ 0.000000] ACPI: RSDP 000fa340 00014 (v00 AMI ) [ 0.000000] ACPI: RSDT 1fff0000 00028 (v01 AMIINT SiS735XX 00001000 MSFT 0100000B) [ 0.000000] ACPI: FACP 1fff0030 00074 (v01 AMIINT SiS735XX 00001000 MSFT 0100000B) [ 0.000000] ACPI: DSDT 1fff0100 03332 (v01 SiS 735 00000100 MSFT 0100000D) [ 0.000000] ACPI: FACS 1fff8000 00040 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1fff0000 [ 0.000000] low ram: 0 - 1fff0000 [ 0.000000] node 0 low ram: 00000000 - 1fff0000 [ 0.000000] node 0 bootmap 00011000 - 00015000 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001fff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98] [ 0.000000] #4 [001f6d1000 - 001ffbf970] RAMDISK ==> [001f6d1000 - 001ffbf970] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [00008da000 - 00008dd294] BRK ==> [00008da000 - 00008dd294] [ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #8 [0000011000 - 0000015000] BOOTMAP ==> [0000011000 - 0000015000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001fff0 [ 0.000000] HighMem 0x0001fff0 -> 0x0001fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001fff0 [ 0.000000] On node 0 totalpages: 130943 [ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1001200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 992 pages used for memmap [ 0.000000] Normal zone: 125968 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36024 r0 d21320 u4194304 [ 0.000000] pcpu-alloc: s36024 r0 d21320 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129919 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 2620800 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 499120k/524224k available (4673k kernel code, 24352k reserved, 2122k data, 656k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xe07f0000 - 0xff7fe000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB) [ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB) [ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1526.876 MHz processor. [ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3053.75 BogoMIPS (lpj=6107504) [ 0.004040] Security Framework initialized [ 0.004084] AppArmor: AppArmor initialized [ 0.004097] Mount-cache hash table entries: 512 [ 0.004307] Initializing cgroup subsys ns [ 0.004314] Initializing cgroup subsys cpuacct [ 0.004321] Initializing cgroup subsys memory [ 0.004336] Initializing cgroup subsys devices [ 0.004340] Initializing cgroup subsys freezer [ 0.004344] Initializing cgroup subsys net_cls [ 0.004374] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004378] CPU: L2 Cache: 256K (64 bytes/line) [ 0.004385] mce: CPU supports 4 MCE banks [ 0.004412] Performance Events: AMD PMU driver. [ 0.004430] ... version: 0 [ 0.004433] ... bit width: 48 [ 0.004436] ... generic registers: 4 [ 0.004439] ... value mask: 0000ffffffffffff [ 0.004442] ... max period: 00007fffffffffff [ 0.004445] ... fixed-purpose events: 0 [ 0.008006] ... event mask: 000000000000000f [ 0.008012] Checking 'hlt' instruction... OK. [ 0.024744] SMP alternatives: switching to UP code [ 0.032903] Freeing SMP alternatives: 19k freed [ 0.032952] ACPI: Core revision 20090903 [ 0.039895] ACPI: setting ELCR to 0200 (from 1820) [ 0.040017] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.040032] ftrace: allocating 21771 entries in 43 pages [ 0.044189] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.044196] weird, boot CPU (#0) not listed by the BIOS. [ 0.044199] SMP motherboard not detected. [ 0.044204] Local APIC not detected. Using dummy APIC emulation. [ 0.044207] SMP disabled [ 0.044627] Brought up 1 CPUs [ 0.044631] Total of 1 processors activated (3053.75 BogoMIPS). [ 0.045037] CPU0 attaching NULL sched-domain. [ 0.045347] devtmpfs: initialized [ 0.045896] regulator: core version 0.5 [ 0.045925] Time: 21:16:27 Date: 08/11/10 [ 0.046003] NET: Registered protocol family 16 [ 0.046202] EISA bus registered [ 0.046222] ACPI: bus type pci registered [ 0.049297] PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1 [ 0.049301] PCI: Using configuration type 1 for base access [ 0.050784] bio: create slab at 0 [ 0.051469] ACPI: EC: Look up EC in DSDT [ 0.057743] ACPI: Interpreter enabled [ 0.057758] ACPI: (supports S0 S1 S4 S5) [ 0.057789] ACPI: Using PIC for interrupt routing [ 0.063734] ACPI: Power Resource [URP1] (off) [ 0.063776] ACPI: Power Resource [URP2] (off) [ 0.063815] ACPI: Power Resource [FDDP] (off) [ 0.063855] ACPI: Power Resource [LPTP] (off) [ 0.064017] ACPI: No dock devices found. [ 0.064512] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.064586] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] [ 0.064728] pci 0000:00:02.0: Enabling SiS 96x SMBus [ 0.064775] pci 0000:00:02.1: reg 20 io port: [0xc00-0xc1f] [ 0.064813] pci 0000:00:02.2: reg 10 32bit mmio: [0xcfffe000-0xcfffefff] [ 0.064865] pci 0000:00:02.3: reg 10 32bit mmio: [0xcffff000-0xcfffffff] [ 0.064939] pci 0000:00:02.5: reg 20 io port: [0xff00-0xff0f] [ 0.064999] pci 0000:00:0b.0: reg 10 io port: [0xd800-0xd8ff] [ 0.065008] pci 0000:00:0b.0: reg 14 32bit mmio: [0xcfffdf00-0xcfffdfff] [ 0.065048] pci 0000:00:0b.0: supports D1 D2 [ 0.065052] pci 0000:00:0b.0: PME# supported from D1 D2 D3hot D3cold [ 0.065058] pci 0000:00:0b.0: PME# disabled [ 0.065093] pci 0000:00:0d.0: reg 10 32bit mmio: [0xcfffb000-0xcfffbfff] [ 0.065136] pci 0000:00:0d.0: supports D1 D2 [ 0.065139] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot [ 0.065144] pci 0000:00:0d.0: PME# disabled [ 0.065179] pci 0000:00:0d.1: reg 10 32bit mmio: [0xcfffc000-0xcfffcfff] [ 0.065221] pci 0000:00:0d.1: supports D1 D2 [ 0.065224] pci 0000:00:0d.1: PME# supported from D0 D1 D2 D3hot [ 0.065230] pci 0000:00:0d.1: PME# disabled [ 0.065264] pci 0000:00:0d.2: reg 10 32bit mmio: [0xcfffde00-0xcfffdeff] [ 0.065306] pci 0000:00:0d.2: supports D1 D2 [ 0.065310] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot [ 0.065315] pci 0000:00:0d.2: PME# disabled [ 0.065356] pci 0000:00:0f.0: reg 10 io port: [0xd400-0xd41f] [ 0.065399] pci 0000:00:0f.0: supports D1 D2 [ 0.065432] pci 0000:00:0f.1: reg 10 io port: [0xdc00-0xdc07] [ 0.065475] pci 0000:00:0f.1: supports D1 D2 [ 0.065546] pci 0000:01:00.0: reg 10 32bit mmio: [0xce000000-0xceffffff] [ 0.065554] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xb0000000-0xbfffffff] [ 0.065576] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xcfee0000-0xcfefffff] [ 0.065636] pci 0000:00:01.0: bridge 32bit mmio: [0xcde00000-0xcfefffff] [ 0.065642] pci 0000:00:01.0: bridge 32bit mmio pref: [0xadc00000-0xcdcfffff] [ 0.065652] pci_bus 0000:00: on NUMA node 0 [ 0.065659] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.067662] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15) [ 0.067811] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 12 14 15) [ 0.067955] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 *12 14 15) [ 0.068118] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 *12 14 15) [ 0.068262] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.068406] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.068549] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.068693] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 *11 12 14 15) [ 0.068881] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.068886] vgaarb: loaded [ 0.069122] SCSI subsystem initialized [ 0.069289] libata version 3.00 loaded. [ 0.069421] usbcore: registered new interface driver usbfs [ 0.069441] usbcore: registered new interface driver hub [ 0.069489] usbcore: registered new device driver usb [ 0.069705] ACPI: WMI: Mapper loaded [ 0.069708] PCI: Using ACPI for IRQ routing [ 0.069937] NetLabel: Initializing [ 0.069940] NetLabel: domain hash size = 128 [ 0.069943] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.069974] NetLabel: unlabeled traffic allowed by default [ 0.070032] Switching to clocksource tsc [ 0.072001] AppArmor: AppArmor Filesystem Enabled [ 0.072001] pnp: PnP ACPI init [ 0.072001] ACPI: bus type pnp registered [ 0.076224] pnp: PnP ACPI: found 12 devices [ 0.076228] ACPI: ACPI bus type pnp unregistered [ 0.076235] PnPBIOS: Disabled by ACPI PNP [ 0.111081] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.111085] pci 0000:00:01.0: IO window: disabled [ 0.111093] pci 0000:00:01.0: MEM window: 0xcde00000-0xcfefffff [ 0.111100] pci 0000:00:01.0: PREFETCH window: 0xadc00000-0xcdcfffff [ 0.111122] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.111127] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.111132] pci_bus 0000:01: resource 1 mem: [0xcde00000-0xcfefffff] [ 0.111136] pci_bus 0000:01: resource 2 pref mem [0xadc00000-0xcdcfffff] [ 0.111201] NET: Registered protocol family 2 [ 0.111347] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.111781] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.112045] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.112308] TCP: Hash tables configured (established 16384 bind 16384) [ 0.112312] TCP reno registered [ 0.112457] NET: Registered protocol family 1 [ 0.112583] pci 0000:01:00.0: Boot video device [ 0.112958] cpufreq-nforce2: No nForce2 chipset. [ 0.112999] Scanning for low memory corruption every 60 seconds [ 0.113209] audit: initializing netlink socket (disabled) [ 0.113231] type=2000 audit(1281561387.109:1): initialized [ 0.126129] Trying to unpack rootfs image as initramfs... [ 3.257464] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 3.260193] VFS: Disk quotas dquot_6.5.2 [ 3.260290] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 3.261285] fuse init (API version 7.13) [ 3.261434] msgmni has been set to 975 [ 3.261827] alg: No test for stdrng (krng) [ 3.261882] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 3.261887] io scheduler noop registered [ 3.261890] io scheduler anticipatory registered [ 3.261893] io scheduler deadline registered [ 3.261967] io scheduler cfq registered (default) [ 3.262153] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.262191] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 3.262375] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 3.262389] ACPI: Sleep Button [SLPB] [ 3.262474] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 3.262479] ACPI: Power Button [PWRF] [ 3.262702] processor LNXCPU:00: registered as cooling_device0 [ 3.265916] isapnp: Scanning for PnP cards... [ 3.273786] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.273932] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.274076] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 3.274480] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.274654] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 3.276533] brd: module loaded [ 3.277391] loop: module loaded [ 3.277587] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 3.277844] pata_sis 0000:00:02.5: version 0.5.2 [ 3.321637] scsi0 : pata_sis [ 3.321790] scsi1 : pata_sis [ 3.323193] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 3.323198] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 3.323754] Fixed MDIO Bus: probed [ 3.323812] PPP generic driver version 2.4.2 [ 3.323942] tun: Universal TUN/TAP device driver, 1.6 [ 3.323945] tun: (C) 1999-2004 Max Krasnyansky [ 3.324167] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.324427] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5 [ 3.324431] PCI: setting IRQ 5 as level-triggered [ 3.324438] ehci_hcd 0000:00:0d.2: PCI INT C -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5 [ 3.324470] ehci_hcd 0000:00:0d.2: EHCI Host Controller [ 3.324537] ehci_hcd 0000:00:0d.2: new USB bus registered, assigned bus number 1 [ 3.368356] ehci_hcd 0000:00:0d.2: irq 5, io mem 0xcfffde00 [ 3.411856] ehci_hcd 0000:00:0d.2: USB 2.0 started, EHCI 1.00 [ 3.412035] usb usb1: configuration #1 chosen from 1 choice [ 3.412088] hub 1-0:1.0: USB hub found [ 3.412107] hub 1-0:1.0: 5 ports detected [ 3.412226] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.412498] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12 [ 3.412503] PCI: setting IRQ 12 as level-triggered [ 3.412509] ohci_hcd 0000:00:02.2: PCI INT D -> Link[LNKD] -> GSI 12 (level, low) -> IRQ 12 [ 3.412536] ohci_hcd 0000:00:02.2: OHCI Host Controller [ 3.412601] ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 2 [ 3.412631] ohci_hcd 0000:00:02.2: irq 12, io mem 0xcfffe000 [ 3.501763] usb usb2: configuration #1 chosen from 1 choice [ 3.501815] hub 2-0:1.0: USB hub found [ 3.501834] hub 2-0:1.0: 3 ports detected [ 3.502086] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 [ 3.502090] PCI: setting IRQ 11 as level-triggered [ 3.502096] ohci_hcd 0000:00:02.3: PCI INT A -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 [ 3.502113] ohci_hcd 0000:00:02.3: OHCI Host Controller [ 3.502172] ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 3 [ 3.502199] ohci_hcd 0000:00:02.3: irq 11, io mem 0xcffff000 [ 3.592209] usb usb3: configuration #1 chosen from 1 choice [ 3.592249] ata1.00: ATA-6: ST320410A, 3.31, max UDMA/100 [ 3.592253] ata1.00: 39102336 sectors, multi 16: LBA [ 3.592386] hub 3-0:1.0: USB hub found [ 3.592406] hub 3-0:1.0: 3 ports detected [ 3.592688] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12 [ 3.592695] ohci_hcd 0000:00:0d.0: PCI INT A -> Link[LNKC] -> GSI 12 (level, low) -> IRQ 12 [ 3.592717] ohci_hcd 0000:00:0d.0: OHCI Host Controller [ 3.592782] ohci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 4 [ 3.592811] ohci_hcd 0000:00:0d.0: irq 12, io mem 0xcfffb000 [ 3.636403] isapnp: No Plug & Play device found [ 3.636421] ata1.01: ATA-5: WDC WD800JB-00CRA1, 17.07W17, max UDMA/100 [ 3.636426] ata1.01: 156301488 sectors, multi 16: LBA [ 3.636459] ata1.00: limited to UDMA/33 due to 40-wire cable [ 3.636464] ata1.01: limited to UDMA/33 due to 40-wire cable [ 3.678304] ata1.00: configured for UDMA/33 [ 3.693291] ata1.01: configured for UDMA/33 [ 3.693543] scsi 0:0:0:0: Direct-Access ATA ST320410A 3.31 PQ: 0 ANSI: 5 [ 3.693860] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.694085] sd 0:0:0:0: [sda] 39102336 512-byte logical blocks: (20.0 GB/18.6 GiB) [ 3.694177] sd 0:0:0:0: [sda] Write Protect is off [ 3.694182] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.694229] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.694489] sda: [ 3.708383] usb usb4: configuration #1 chosen from 1 choice [ 3.708442] hub 4-0:1.0: USB hub found [ 3.708466] hub 4-0:1.0: 3 ports detected [ 3.708572] ohci_hcd 0000:00:0d.1: PCI INT B -> Link[LNKD] -> GSI 12 (level, low) -> IRQ 12 [ 3.708607] ohci_hcd 0000:00:0d.1: OHCI Host Controller [ 3.708698] ohci_hcd 0000:00:0d.1: new USB bus registered, assigned bus number 5 [ 3.708734] ohci_hcd 0000:00:0d.1: irq 12, io mem 0xcfffc000 [ 3.726774] sda1 [ 3.727152] scsi 0:0:1:0: Direct-Access ATA WDC WD800JB-00CR 17.0 PQ: 0 ANSI: 5 [ 3.727402] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 3.727679] sd 0:0:1:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 3.727872] sd 0:0:1:0: [sdb] Write Protect is off [ 3.727877] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.727964] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.727973] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.728299] sdb: sdb1 sdb2 < [ 3.756126] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 3.759716] sdb5 > [ 3.760452] sd 0:0:1:0: [sdb] Attached SCSI disk [ 3.824402] usb usb5: configuration #1 chosen from 1 choice [ 3.824460] hub 5-0:1.0: USB hub found [ 3.824488] hub 5-0:1.0: 2 ports detected [ 3.824595] uhci_hcd: USB Universal Host Controller Interface driver [ 3.824755] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 3.824759] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 3.824935] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.825165] mice: PS/2 mouse device common for all mice [ 3.825429] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 3.825453] rtc0: alarms up to one month, 114 bytes nvram [ 3.825574] device-mapper: uevent: version 1.0.3 [ 3.825779] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 3.828958] device-mapper: multipath: version 1.1.0 loaded [ 3.828967] device-mapper: multipath round-robin: version 1.0.0 loaded [ 3.830150] EISA: Probing bus 0 at eisa.0 [ 3.830191] EISA: Detected 0 cards. [ 3.833383] cpuidle: using governor ladder [ 3.833390] cpuidle: using governor menu [ 3.834127] TCP cubic registered [ 3.834382] NET: Registered protocol family 10 [ 3.835049] lo: Disabled Privacy Extensions [ 3.835493] NET: Registered protocol family 17 [ 3.835597] powernow-k8: Processor cpuid 662 not supported [ 3.835636] Using IPI No-Shortcut mode [ 3.835820] PM: Resume from disk failed. [ 3.835847] registered taskstats version 1 [ 3.836162] Magic number: 6:785:297 [ 3.836328] rtc_cmos 00:02: setting system clock to 2010-08-11 21:16:30 UTC (1281561390) [ 3.836334] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.836337] EDD information not available. [ 3.844538] Freeing initrd memory: 9146k freed [ 3.864446] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 3.889529] usb 1-3: configuration #1 chosen from 1 choice [ 3.889828] hub 1-3:1.0: USB hub found [ 3.890155] hub 1-3:1.0: 4 ports detected [ 4.064398] ata2.00: ATAPI: SAMSUNG SC-148P, PS04, max MWDMA2 [ 4.064441] ata2.01: ATAPI: LITE-ON LTR-40125S, ZS0J, max UDMA/33 [ 4.080277] ata2.00: configured for PIO4 [ 4.096261] ata2.01: configured for UDMA/33 [ 4.097355] scsi 1:0:0:0: CD-ROM SAMSUNG CD-ROM SC-148P PS04 PQ: 0 ANSI: 5 [ 4.102972] sr0: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray [ 4.102978] Uniform CD-ROM driver Revision: 3.20 [ 4.103184] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 4.103301] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 4.103852] scsi 1:0:1:0: CD-ROM LITE-ON LTR-40125S ZS0J PQ: 0 ANSI: 5 [ 4.104989] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 4.105127] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 4.105225] sr 1:0:1:0: Attached scsi generic sg3 type 5 [ 4.105310] Freeing unused kernel memory: 656k freed [ 4.106739] Write protecting the kernel text: 4676k [ 4.106786] Write protecting the kernel read-only data: 1840k [ 4.154162] ramzswap: disk size set to 254620 kB [ 4.168234] udev: starting version 151 [ 4.304127] usb 5-2: new full speed USB device using ohci_hcd and address 2 [ 4.322107] Adding 254616k swap on /dev/ramzswap0. Priority:100 extents:1 across:254616k SS [ 4.514247] usb 5-2: configuration #1 chosen from 1 choice [ 4.523200] hub 5-2:1.0: USB hub found [ 4.526057] hub 5-2:1.0: 4 ports detected [ 4.562585] Floppy drive(s): fd0 is 1.44M [ 4.567905] Linux agpgart interface v0.103 [ 4.579932] FDC 0 is a post-1991 82077 [ 4.587807] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 4.587858] 8139cp 0000:00:0b.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 4.617293] usb 1-3.1: new high speed USB device using ehci_hcd and address 4 [ 4.618018] agpgart-sis 0000:00:00.0: SiS chipset [1039/0735] [ 4.634485] 8139too Fast Ethernet driver 0.9.28 [ 4.635092] agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd0000000 [ 4.635445] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 4.635454] 8139too 0000:00:0b.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 4.636845] eth0: RealTek RTL8139 at 0xd800, 00:02:44:65:e2:e7, IRQ 11 [ 4.692644] [drm] Initialized drm 1.1.0 20060810 [ 4.719998] usb 1-3.1: configuration #1 chosen from 1 choice [ 4.770944] nouveau 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5 [ 4.777610] Initializing USB Mass Storage driver... [ 4.779736] scsi2 : SCSI emulation for USB Mass Storage devices [ 4.780355] usbcore: registered new interface driver usb-storage [ 4.780362] USB Mass Storage support registered. [ 4.782147] usb-storage: device found at 4 [ 4.782153] usb-storage: waiting for device to settle before scanning [ 4.782493] [drm] nouveau 0000:01:00.0: Detected an NV30 generation card (0x436200a1) [ 4.782640] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM [ 4.907068] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 4.907370] [drm] nouveau 0000:01:00.0: BMP BIOS found [ 4.907374] [drm] nouveau 0000:01:00.0: BMP version 5.40 [ 4.907379] [drm] nouveau 0000:01:00.0: Bios version 04.36.20.21 [ 4.907384] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2 [ 4.907391] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00009c40 [ 4.907396] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02010310 00009c40 [ 4.907400] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01010312 00000000 [ 4.907404] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02020321 00000333 [ 4.907666] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode [ 4.907672] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xF04B [ 4.907723] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF50F [ 4.909223] usb 1-3.3: new high speed USB device using ehci_hcd and address 5 [ 4.912097] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF751 [ 4.912155] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF8C4 [ 4.912256] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF8E1 [ 4.912442] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xF8FE [ 4.920055] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xF987 [ 4.934822] [TTM] Zone kernel: Available graphics memory: 254622 kiB. [ 4.934847] [drm] nouveau 0000:01:00.0: 128 MiB VRAM [ 4.934942] agpgart-sis 0000:00:00.0: AGP 2.0 bridge [ 4.934969] agpgart-sis 0000:00:00.0: putting AGP V2 device into 4x mode [ 4.935023] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode [ 4.935029] [drm] nouveau 0000:01:00.0: 128 MiB GART (aperture) [ 4.935387] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0 [ 4.937799] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0 [ 4.937819] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0 [ 4.937827] [drm] nouveau 0000:01:00.0: Saving VGA fonts [ 4.977731] [drm] nouveau 0000:01:00.0: Detected a VGA connector [ 4.978660] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector [ 4.978824] [drm] nouveau 0000:01:00.0: Detected a TV connector [ 4.979952] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 4.979958] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [ 4.979963] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2) [ 4.979969] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) [ 5.021636] usb 1-3.3: configuration #1 chosen from 1 choice [ 5.022444] hub 1-3.3:1.0: USB hub found [ 5.022828] hub 1-3.3:1.0: 4 ports detected [ 5.140943] usb 5-2.3: new low speed USB device using ohci_hcd and address 3 [ 5.164265] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x49000, bo daec8a00 [ 5.164619] fb0: nouveaufb frame buffer device [ 5.164623] registered panic notifier [ 5.164633] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 [ 5.172613] vga16fb: initializing [ 5.172625] vga16fb: mapped to 0xc00a0000 [ 5.172636] vga16fb: not registering due to another framebuffer present [ 5.201612] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A [ 5.201621] [drm] nouveau 0000:01:00.0: 0xE383: Parsing digital output script table [ 5.256113] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 2) [ 5.256124] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A [ 5.257284] Console: switching to colour frame buffer device 128x48 [ 5.259158] usb 5-2.3: configuration #1 chosen from 1 choice [ 5.283302] usbcore: registered new interface driver hiddev [ 5.290519] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:0d.1/usb5/5-2/5-2.3/5-2.3:1.0/input/input4 [ 5.290906] generic-usb 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0d.1-2.3/input0 [ 5.290971] usbcore: registered new interface driver usbhid [ 5.291192] usbhid: v2.6:USB HID core driver [ 5.336406] usb 1-3.3.4: new full speed USB device using ehci_hcd and address 6 [ 5.429458] usb 1-3.3.4: configuration #1 chosen from 1 choice [ 5.430269] hub 1-3.3.4:1.0: USB hub found [ 5.430502] hub 1-3.3.4:1.0: 2 ports detected [ 5.700211] usb 1-3.3.4.1: new full speed USB device using ehci_hcd and address 7 [ 5.757028] xor: automatically using best checksumming function: pIII_sse [ 5.776045] pIII_sse : 1794.000 MB/sec [ 5.776049] xor: using function: pIII_sse (1794.000 MB/sec) [ 5.782152] device-mapper: dm-raid45: initialized v0.2594b [ 5.799078] usb 1-3.3.4.1: configuration #1 chosen from 1 choice [ 5.872180] usb 1-3.3.4.2: new full speed USB device using ehci_hcd and address 8 [ 5.966490] usb 1-3.3.4.2: configuration #1 chosen from 1 choice [ 9.781248] usb-storage: device scan complete [ 9.781812] scsi 2:0:0:0: Direct-Access Maxtor 6 L080P0 PQ: 0 ANSI: 2 CCS [ 9.783607] sd 2:0:0:0: Attached scsi generic sg4 type 0 [ 9.784535] sd 2:0:0:0: [sdc] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB) [ 9.785297] sd 2:0:0:0: [sdc] Write Protect is off [ 9.785305] sd 2:0:0:0: [sdc] Mode Sense: 28 00 00 00 [ 9.785310] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 9.786902] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 9.786911] sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 > [ 9.861162] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 9.861173] sd 2:0:0:0: [sdc] Attached SCSI disk [ 14.449839] sr 1:0:1:0: [sr1] Unhandled sense code [ 14.449847] sr 1:0:1:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 14.449854] sr 1:0:1:0: [sr1] Sense Key : Medium Error [current] [ 14.449862] sr 1:0:1:0: [sr1] Add. Sense: Unrecovered read error [ 14.449871] sr 1:0:1:0: [sr1] CDB: Read(10): 28 00 00 05 76 e2 00 00 01 00 [ 14.449883] end_request: I/O error, dev sr1, sector 1432456 [ 14.449892] Buffer I/O error on device sr1, logical block 358114 [ 18.164134] sr 1:0:1:0: [sr1] Unhandled sense code [ 18.164140] sr 1:0:1:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 18.164146] sr 1:0:1:0: [sr1] Sense Key : Medium Error [current] [ 18.164153] sr 1:0:1:0: [sr1] Add. Sense: Unrecovered read error [ 18.164160] sr 1:0:1:0: [sr1] CDB: Read(10): 28 00 00 05 76 e2 00 00 01 00 [ 18.164171] end_request: I/O error, dev sr1, sector 1432456 [ 18.164179] Buffer I/O error on device sr1, logical block 358114 [ 21.877988] sr 1:0:1:0: [sr1] Unhandled sense code [ 21.877994] sr 1:0:1:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 21.878000] sr 1:0:1:0: [sr1] Sense Key : Medium Error [current] [ 21.878006] sr 1:0:1:0: [sr1] Add. Sense: Unrecovered read error [ 21.878013] sr 1:0:1:0: [sr1] CDB: Read(10): 28 00 00 05 76 e2 00 00 01 00 [ 21.878025] end_request: I/O error, dev sr1, sector 1432456 [ 21.878031] Buffer I/O error on device sr1, logical block 358114 [ 25.591737] sr 1:0:1:0: [sr1] Unhandled sense code [ 25.591743] sr 1:0:1:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 25.591749] sr 1:0:1:0: [sr1] Sense Key : Medium Error [current] [ 25.591755] sr 1:0:1:0: [sr1] Add. Sense: Unrecovered read error [ 25.591763] sr 1:0:1:0: [sr1] CDB: Read(10): 28 00 00 05 76 e2 00 00 01 00 [ 25.591774] end_request: I/O error, dev sr1, sector 1432456 [ 25.591781] Buffer I/O error on device sr1, logical block 358114 [ 29.305749] sr 1:0:1:0: [sr1] Unhandled sense code [ 29.305755] sr 1:0:1:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 29.305760] sr 1:0:1:0: [sr1] Sense Key : Medium Error [current] [ 29.305766] sr 1:0:1:0: [sr1] Add. Sense: Unrecovered read error [ 29.305772] sr 1:0:1:0: [sr1] CDB: Read(10): 28 00 00 05 76 e2 00 00 01 00 [ 29.305783] end_request: I/O error, dev sr1, sector 1432456 [ 29.305790] Buffer I/O error on device sr1, logical block 358114 [ 33.019694] sr 1:0:1:0: [sr1] Unhandled sense code [ 33.019699] sr 1:0:1:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 33.019706] sr 1:0:1:0: [sr1] Sense Key : Medium Error [current] [ 33.019712] sr 1:0:1:0: [sr1] Add. Sense: Unrecovered read error [ 33.019719] sr 1:0:1:0: [sr1] CDB: Read(10): 28 00 00 05 76 e2 00 00 01 00 [ 33.019731] end_request: I/O error, dev sr1, sector 1432456 [ 33.019738] Buffer I/O error on device sr1, logical block 358114 [ 36.733691] sr 1:0:1:0: [sr1] Unhandled sense code [ 36.733698] sr 1:0:1:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 36.733704] sr 1:0:1:0: [sr1] Sense Key : Medium Error [current] [ 36.733711] sr 1:0:1:0: [sr1] Add. Sense: Unrecovered read error [ 36.733718] sr 1:0:1:0: [sr1] CDB: Read(10): 28 00 00 05 76 e2 00 00 01 00 [ 36.733730] end_request: I/O error, dev sr1, sector 1432456 [ 36.733737] Buffer I/O error on device sr1, logical block 358114 [ 40.747297] sr 1:0:1:0: [sr1] Unhandled sense code [ 40.747305] sr 1:0:1:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 40.747311] sr 1:0:1:0: [sr1] Sense Key : Medium Error [current] [ 40.747318] sr 1:0:1:0: [sr1] Add. Sense: Unrecovered read error [ 40.747326] sr 1:0:1:0: [sr1] CDB: Read(10): 28 00 00 05 76 e0 00 00 02 00 [ 40.747338] end_request: I/O error, dev sr1, sector 1432452 [ 40.747344] Buffer I/O error on device sr1, logical block 358113 [ 44.464897] sr 1:0:1:0: [sr1] Unhandled sense code [ 44.464903] sr 1:0:1:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 44.464909] sr 1:0:1:0: [sr1] Sense Key : Medium Error [current] [ 44.464916] sr 1:0:1:0: [sr1] Add. Sense: Unrecovered read error [ 44.464922] sr 1:0:1:0: [sr1] CDB: Read(10): 28 00 00 05 76 e2 00 00 01 00 [ 44.464934] end_request: I/O error, dev sr1, sector 1432456 [ 44.464941] Buffer I/O error on device sr1, logical block 358114 [ 48.178638] sr 1:0:1:0: [sr1] Unhandled sense code [ 48.178644] sr 1:0:1:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 48.178650] sr 1:0:1:0: [sr1] Sense Key : Medium Error [current] [ 48.178656] sr 1:0:1:0: [sr1] Add. Sense: Unrecovered read error [ 48.178664] sr 1:0:1:0: [sr1] CDB: Read(10): 28 00 00 05 76 e2 00 00 01 00 [ 48.178675] end_request: I/O error, dev sr1, sector 1432456 [ 48.178682] Buffer I/O error on device sr1, logical block 358114 [ 51.889127] sr 1:0:1:0: [sr1] Unhandled sense code [ 51.889134] sr 1:0:1:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 51.889140] sr 1:0:1:0: [sr1] Sense Key : Medium Error [current] [ 51.889147] sr 1:0:1:0: [sr1] Add. Sense: Unrecovered read error [ 51.889154] sr 1:0:1:0: [sr1] CDB: Read(10): 28 00 00 05 76 e1 00 00 01 00 [ 51.889166] end_request: I/O error, dev sr1, sector 1432452 [ 51.889173] Buffer I/O error on device sr1, logical block 358113 [ 53.144991] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 53.232189] ISO 9660 Extensions: RRIP_1991A [ 53.833637] aufs 2-standalone.tree-20091207 [ 54.368996] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 123.810539] udev: starting version 151 [ 126.038605] sis630_smbus 0000:00:02.0: SIS630 comp. bus not detected, module not inserted. [ 126.053236] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00 [ 126.053248] ACPI: resource 0000:00:02.1 [0xc00-0xc1f] conflicts with ACPI region SMRG [0xc00-0xc1f] [ 126.053253] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 126.387879] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 126.737508] gameport: EMU10K1 is pci0000:00:0f.1/gameport0, io 0xdc00, speed 1242kHz [ 127.617121] gameport: NS558 PnP Gameport is pnp00:0a/gameport0, io 0x201, speed 670kHz [ 128.019095] parport_pc 00:09: reported by Plug and Play ACPI [ 128.019161] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 128.578072] ppdev: user-space parallel port driver [ 130.011070] usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x043D pid 0x007B [ 130.011183] usbcore: registered new interface driver usblp [ 130.480902] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 131.404872] EMU10K1_Audigy 0000:00:0f.0: PCI INT A -> Link[LNKD] -> GSI 12 (level, low) -> IRQ 12 [ 137.565493] lp0: using parport0 (interrupt-driven). [ 139.132817] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 139.158286] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 140.764064] eth0: no IPv6 routers present [ 143.794912] usb 1-3.3.4.2: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 [ 180.232327] end_request: I/O error, dev fd0, sector 0 [ 192.440637] end_request: I/O error, dev fd0, sector 0 [ 452.093368] [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1 [ 456.320722] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 456.323124] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 535.736775] usb 1-3.3.4.2: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 [ 587.293997] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 587.307950] SGI XFS Quota Management subsystem [ 587.368682] JFS: nTxBlock = 3978, nTxLock = 31827 [ 587.467890] NTFS driver 2.1.29 [Flags: R/O MODULE]. [ 587.625176] QNX4 filesystem 0.2.3 registered. [ 587.929526] Btrfs loaded [ 614.849946] cdrom: sr1: mrw address space DMA selected [ 627.040617] end_request: I/O error, dev fd0, sector 0 [ 639.204408] end_request: I/O error, dev fd0, sector 0 [ 665.269198] cdrom: sr1: mrw address space DMA selected [ 684.444701] sd 2:0:0:0: [sdc] Unhandled sense code [ 684.444712] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE [ 684.444719] sd 2:0:0:0: [sdc] Sense Key : Hardware Error [current] [ 684.444726] sd 2:0:0:0: [sdc] Add. Sense: No additional sense information [ 684.444733] sd 2:0:0:0: [sdc] CDB: Read(10): 28 00 07 8e e6 d0 00 00 20 00 [ 684.444746] end_request: I/O error, dev sdc, sector 126805712 [ 684.444759] Buffer I/O error on device sdc7, logical block 15362744 [ 684.444766] Buffer I/O error on device sdc7, logical block 15362745 [ 684.444771] Buffer I/O error on device sdc7, logical block 15362746 [ 684.444776] Buffer I/O error on device sdc7, logical block 15362747 [ 684.444781] Buffer I/O error on device sdc7, logical block 15362748 [ 684.444787] Buffer I/O error on device sdc7, logical block 15362749 [ 684.444792] Buffer I/O error on device sdc7, logical block 15362750 [ 684.444796] Buffer I/O error on device sdc7, logical block 15362751 [ 684.444806] Buffer I/O error on device sdc7, logical block 15362752 [ 684.444811] Buffer I/O error on device sdc7, logical block 15362753 [ 700.405822] sd 2:0:0:0: [sdc] Unhandled sense code [ 700.405833] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE [ 700.405840] sd 2:0:0:0: [sdc] Sense Key : Hardware Error [current] [ 700.405847] sd 2:0:0:0: [sdc] Add. Sense: No additional sense information [ 700.405854] sd 2:0:0:0: [sdc] CDB: Read(10): 28 00 07 8e df 00 00 00 20 00 [ 700.405867] end_request: I/O error, dev sdc, sector 126803712 [ 700.405877] __ratelimit: 22 callbacks suppressed [ 700.405883] Buffer I/O error on device sdc7, logical block 15360744 [ 700.405891] Buffer I/O error on device sdc7, logical block 15360745 [ 700.405896] Buffer I/O error on device sdc7, logical block 15360746 [ 700.405901] Buffer I/O error on device sdc7, logical block 15360747 [ 700.405905] Buffer I/O error on device sdc7, logical block 15360748 [ 700.405910] Buffer I/O error on device sdc7, logical block 15360749 [ 700.405915] Buffer I/O error on device sdc7, logical block 15360750 [ 700.405919] Buffer I/O error on device sdc7, logical block 15360751 [ 700.405929] Buffer I/O error on device sdc7, logical block 15360752 [ 700.405934] Buffer I/O error on device sdc7, logical block 15360753 [ 709.428929] sd 2:0:0:0: [sdc] Unhandled sense code [ 709.428940] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE [ 709.428947] sd 2:0:0:0: [sdc] Sense Key : Hardware Error [current] [ 709.428954] sd 2:0:0:0: [sdc] Add. Sense: No additional sense information [ 709.428962] sd 2:0:0:0: [sdc] CDB: Read(10): 28 00 07 8e df 00 00 00 08 00 [ 709.428975] end_request: I/O error, dev sdc, sector 126803712 [ 709.428984] __ratelimit: 22 callbacks suppressed [ 709.428991] Buffer I/O error on device sdc7, logical block 15360744 [ 709.428997] Buffer I/O error on device sdc7, logical block 15360745 [ 709.429002] Buffer I/O error on device sdc7, logical block 15360746 [ 709.429006] Buffer I/O error on device sdc7, logical block 15360747 [ 709.429011] Buffer I/O error on device sdc7, logical block 15360748 [ 709.429016] Buffer I/O error on device sdc7, logical block 15360749 [ 709.429020] Buffer I/O error on device sdc7, logical block 15360750 [ 709.429025] Buffer I/O error on device sdc7, logical block 15360751