[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-22-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #33-Ubuntu SMP Wed Apr 28 13:28:05 UTC 2010 (Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=f930b30c-e85d-4d52-a3d3-7b17b19759d1 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000097800 (usable) [ 0.000000] BIOS-e820: 0000000000097800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000d7ef0000 (usable) [ 0.000000] BIOS-e820: 00000000d7ef0000 - 00000000d7ef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000d7ef3000 - 00000000d7f00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000d8000000 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] DMI present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFE0000000 write-back [ 0.000000] 3 base 0100000000 mask FFE0000000 write-back [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000120000000 aka 4608M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xd7ef0 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 0000000000097800 (usable) [ 0.000000] modified: 0000000000097800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000d7ef0000 (usable) [ 0.000000] modified: 00000000d7ef0000 - 00000000d7ef3000 (ACPI NVS) [ 0.000000] modified: 00000000d7ef3000 - 00000000d7f00000 (ACPI data) [ 0.000000] modified: 00000000d8000000 - 00000000e0000000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000d7ef0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00d7e00000 page 2M [ 0.000000] 00d7e00000 - 00d7ef0000 page 4k [ 0.000000] kernel direct mapping tables up to d7ef0000 @ 10000-16000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0120000000 page 2M [ 0.000000] kernel direct mapping tables up to 120000000 @ 14000-1a000 [ 0.000000] RAMDISK: 377fd000 - 37fef7f6 [ 0.000000] ACPI: RSDP 00000000000f76d0 00024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 00000000d7ef3100 00054 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 00000000d7ef9600 000F4 (v03 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 00000000d7ef32c0 062CE (v01 HPQOEM SLIC-CPC 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000d7ef0000 00040 [ 0.000000] ACPI: SLIC 00000000d7ef9800 00176 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: SSDT 00000000d7ef99c0 002CC (v01 HPQOEM SLIC-CPC 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 00000000d7ef9d00 00038 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 00000000d7ef9d80 0003C (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 00000000d7ef9740 0007C (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000120000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000120000000 [ 0.000000] NODE_DATA [0000000000015000 - 0000000000019fff] [ 0.000000] bootmap [000000000001a000 - 000000000003dfff] pages 24 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0120000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a29e64] TEXT DATA BSS ==> [0001000000 - 0001a29e64] [ 0.000000] #3 [00377fd000 - 0037fef7f6] RAMDISK ==> [00377fd000 - 0037fef7f6] [ 0.000000] #4 [0000097800 - 0000100000] BIOS reserved ==> [0000097800 - 0000100000] [ 0.000000] #5 [0001a2a000 - 0001a2a6d8] BRK ==> [0001a2a000 - 0001a2a6d8] [ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] [ 0.000000] #7 [0000014000 - 0000015000] PGTABLE ==> [0000014000 - 0000015000] [ 0.000000] found SMP MP-table at [ffff8800000f55a0] f55a0 [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00120000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x00000097 [ 0.000000] 0: 0x00000100 -> 0x000d7ef0 [ 0.000000] 0: 0x00100000 -> 0x00120000 [ 0.000000] On node 0 totalpages: 1015415 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 112 pages reserved [ 0.000000] DMA zone: 3807 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 866088 pages, LIFO batch:31 [ 0.000000] Normal zone: 1792 pages used for memmap [ 0.000000] Normal zone: 129280 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000097000 - 0000000000098000 [ 0.000000] PM: Registered nosave memory: 0000000000098000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000d7ef0000 - 00000000d7ef3000 [ 0.000000] PM: Registered nosave memory: 00000000d7ef3000 - 00000000d7f00000 [ 0.000000] PM: Registered nosave memory: 00000000d7f00000 - 00000000d8000000 [ 0.000000] PM: Registered nosave memory: 00000000d8000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000 [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:10000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91544 r8192 d23144 u1048576 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 999175 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=f930b30c-e85d-4d52-a3d3-7b17b19759d1 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ a0ca000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Memory: 3919748k/4718592k available (5409k kernel code, 656932k absent, 141912k reserved, 2976k data, 876k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 40632320 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2813.155 MHz processor. [ 0.010005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5626.31 BogoMIPS (lpj=28131550) [ 0.010029] Security Framework initialized [ 0.010047] AppArmor: AppArmor initialized [ 0.010334] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.012088] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.012989] Mount-cache hash table entries: 256 [ 0.013120] Initializing cgroup subsys ns [ 0.013123] Initializing cgroup subsys cpuacct [ 0.013126] Initializing cgroup subsys memory [ 0.013135] Initializing cgroup subsys devices [ 0.013136] Initializing cgroup subsys freezer [ 0.013138] Initializing cgroup subsys net_cls [ 0.013155] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.013157] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.013159] CPU 0/0x0 -> Node 0 [ 0.013161] tseg: 00d7f00000 [ 0.013162] CPU: Physical Processor ID: 0 [ 0.013163] CPU: Processor Core ID: 0 [ 0.013166] mce: CPU supports 5 MCE banks [ 0.013176] using C1E aware idle routine [ 0.013177] Performance Events: AMD PMU driver. [ 0.013181] ... version: 0 [ 0.013183] ... bit width: 48 [ 0.013184] ... generic registers: 4 [ 0.013185] ... value mask: 0000ffffffffffff [ 0.013187] ... max period: 00007fffffffffff [ 0.013188] ... fixed-purpose events: 0 [ 0.013189] ... event mask: 000000000000000f [ 0.014535] ACPI: Core revision 20090903 [ 0.027415] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.027426] ftrace: allocating 22518 entries in 89 pages [ 0.030086] Setting APIC routing to flat [ 0.030538] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.133109] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 03 [ 0.140000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.020000] Initializing CPU#1 [ 0.020000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.020000] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.020000] CPU 1/0x1 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 1 [ 0.290117] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 03 [ 0.290129] Brought up 2 CPUs [ 0.290131] Total of 2 processors activated (11251.92 BogoMIPS). [ 0.290325] CPU0 attaching sched-domain: [ 0.290327] domain 0: span 0-1 level MC [ 0.290329] groups: 0 1 [ 0.290333] CPU1 attaching sched-domain: [ 0.290335] domain 0: span 0-1 level MC [ 0.290337] groups: 1 0 [ 0.290403] devtmpfs: initialized [ 0.290403] regulator: core version 0.5 [ 0.290403] Time: 17:44:46 Date: 05/26/10 [ 0.290403] NET: Registered protocol family 16 [ 0.290403] node 0 link 0: io port [9000, ffff] [ 0.290403] TOM: 00000000e0000000 aka 3584M [ 0.290403] Trying to unpack rootfs image as initramfs... [ 0.290403] node 0 link 0: mmio [a0000, bffff] [ 0.290403] node 0 link 0: mmio [e0000000, efffffff] [ 0.290403] node 0 link 0: mmio [f4000000, fe02ffff] [ 0.290403] node 0 link 0: mmio [f0000000, f03fffff] [ 0.290403] TOM2: 0000000120000000 aka 4608M [ 0.290403] bus: [00,03] on node 0 link 0 [ 0.290403] bus: 00 index 0 io port: [0, ffff] [ 0.290403] bus: 00 index 1 mmio: [a0000, bffff] [ 0.290403] bus: 00 index 2 mmio: [e0000000, f3ffffff] [ 0.290403] bus: 00 index 3 mmio: [f4000000, ffffffff] [ 0.290403] bus: 00 index 4 mmio: [120000000, fcffffffff] [ 0.290403] ACPI: bus type pci registered [ 0.290403] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.290403] PCI: MCFG area at f0000000 reserved in E820 [ 0.292300] PCI: Using MMCONFIG at f0000000 - f3ffffff [ 0.292302] PCI: Using configuration type 1 for base access [ 0.300094] bio: create slab at 0 [ 0.300836] ACPI: EC: Look up EC in DSDT [ 0.307111] ACPI: Interpreter enabled [ 0.307117] ACPI: (supports S0 S1 S3 S4 S5) [ 0.307140] ACPI: Using IOAPIC for interrupt routing [ 0.313728] ACPI: No dock devices found. [ 0.314570] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.314772] pci 0000:00:01.1: reg 10 io port: [0xfc00-0xfc3f] [ 0.314780] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f] [ 0.314784] pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f] [ 0.314801] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.314806] pci 0000:00:01.1: PME# disabled [ 0.314848] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff] [ 0.314867] pci 0000:00:02.0: supports D1 D2 [ 0.314868] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.314871] pci 0000:00:02.0: PME# disabled [ 0.314890] pci 0000:00:02.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff] [ 0.314913] pci 0000:00:02.1: supports D1 D2 [ 0.314914] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.314917] pci 0000:00:02.1: PME# disabled [ 0.314971] pci 0000:00:05.0: reg 10 32bit mmio: [0xfe024000-0xfe027fff] [ 0.314994] pci 0000:00:05.0: PME# supported from D3hot D3cold [ 0.314996] pci 0000:00:05.0: PME# disabled [ 0.315025] pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f] [ 0.315058] pci 0000:00:07.0: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff] [ 0.315061] pci 0000:00:07.0: reg 14 io port: [0xec00-0xec07] [ 0.315079] pci 0000:00:07.0: supports D1 D2 [ 0.315081] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.315084] pci 0000:00:07.0: PME# disabled [ 0.315102] pci 0000:00:08.0: reg 10 io port: [0x9f0-0x9f7] [ 0.315105] pci 0000:00:08.0: reg 14 io port: [0xbf0-0xbf3] [ 0.315108] pci 0000:00:08.0: reg 18 io port: [0x970-0x977] [ 0.315111] pci 0000:00:08.0: reg 1c io port: [0xb70-0xb73] [ 0.315114] pci 0000:00:08.0: reg 20 io port: [0xd800-0xd80f] [ 0.315116] pci 0000:00:08.0: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff] [ 0.315142] pci 0000:00:08.1: reg 10 io port: [0x9e0-0x9e7] [ 0.315145] pci 0000:00:08.1: reg 14 io port: [0xbe0-0xbe3] [ 0.315147] pci 0000:00:08.1: reg 18 io port: [0x960-0x967] [ 0.315150] pci 0000:00:08.1: reg 1c io port: [0xb60-0xb63] [ 0.315153] pci 0000:00:08.1: reg 20 io port: [0xc400-0xc40f] [ 0.315156] pci 0000:00:08.1: reg 24 32bit mmio: [0xfe02b000-0xfe02bfff] [ 0.315198] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.315200] pci 0000:00:09.0: PME# disabled [ 0.315229] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.315231] pci 0000:00:0b.0: PME# disabled [ 0.315246] pci 0000:00:0d.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff] [ 0.315250] pci 0000:00:0d.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.315254] pci 0000:00:0d.0: reg 1c 64bit mmio: [0xfc000000-0xfcffffff] [ 0.315258] pci 0000:00:0d.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.315355] pci 0000:01:05.0: reg 10 32bit mmio: [0xfd9ff000-0xfd9fffff] [ 0.315384] pci 0000:01:05.0: supports D1 D2 [ 0.315385] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot [ 0.315388] pci 0000:01:05.0: PME# disabled [ 0.315411] pci 0000:01:09.0: reg 10 32bit mmio: [0xfd9e0000-0xfd9effff] [ 0.315416] pci 0000:01:09.0: reg 14 io port: [0xbc00-0xbc07] [ 0.315441] pci 0000:01:09.0: PME# supported from D3hot D3cold [ 0.315444] pci 0000:01:09.0: PME# disabled [ 0.315470] pci 0000:01:0a.0: reg 10 32bit mmio: [0xfd9f8000-0xfd9fbfff] [ 0.315475] pci 0000:01:0a.0: reg 14 io port: [0xb800-0xb8ff] [ 0.315492] pci 0000:01:0a.0: reg 30 32bit mmio pref: [0xfd9c0000-0xfd9dffff] [ 0.315507] pci 0000:01:0a.0: supports D1 D2 [ 0.315508] pci 0000:01:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.315511] pci 0000:01:0a.0: PME# disabled [ 0.315537] pci 0000:00:04.0: transparent bridge [ 0.315539] pci 0000:00:04.0: bridge io port: [0xb000-0xbfff] [ 0.315542] pci 0000:00:04.0: bridge 32bit mmio: [0xfd900000-0xfd9fffff] [ 0.315544] pci 0000:00:04.0: bridge 32bit mmio pref: [0xfde00000-0xfdefffff] [ 0.315577] pci 0000:00:09.0: bridge io port: [0xa000-0xafff] [ 0.315579] pci 0000:00:09.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff] [ 0.315582] pci 0000:00:09.0: bridge 64bit mmio pref: [0xfdc00000-0xfdcfffff] [ 0.315614] pci 0000:00:0b.0: bridge io port: [0x9000-0x9fff] [ 0.315616] pci 0000:00:0b.0: bridge 32bit mmio: [0xfdb00000-0xfdbfffff] [ 0.315619] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xfda00000-0xfdafffff] [ 0.315628] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.315770] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.354153] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.354274] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15) [ 0.354395] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 *7 9 10 11 14 15) [ 0.354514] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15) [ 0.354632] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.354755] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.354874] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.354992] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.355112] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 *11 14 15) [ 0.355231] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.355351] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15) [ 0.355474] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15) [ 0.355593] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15) [ 0.355711] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.355831] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) [ 0.355950] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 *7 9 10 11 14 15) [ 0.356069] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.356189] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 0.356308] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15) [ 0.356466] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.356621] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 [ 0.356775] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 0.356930] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 [ 0.357084] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 0.357239] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 0.357394] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 0.357550] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.357709] ACPI: PCI Interrupt Link [AIGP] (IRQs 22 23) *0 [ 0.357864] ACPI: PCI Interrupt Link [APCF] (IRQs 22 23) *0 [ 0.358019] ACPI: PCI Interrupt Link [APCH] (IRQs 22 23) *0 [ 0.358176] ACPI: PCI Interrupt Link [APMU] (IRQs 22 23) *0, disabled. [ 0.358331] ACPI: PCI Interrupt Link [AAZA] (IRQs 22 23) *0 [ 0.358486] ACPI: PCI Interrupt Link [APCS] (IRQs 22 23) *0 [ 0.358642] ACPI: PCI Interrupt Link [APCL] (IRQs 22 23) *0 [ 0.358797] ACPI: PCI Interrupt Link [APCM] (IRQs 22 23) *0, disabled. [ 0.358953] ACPI: PCI Interrupt Link [APCZ] (IRQs 22 23) *0, disabled. [ 0.359112] ACPI: PCI Interrupt Link [APSI] (IRQs 20) *0 [ 0.359267] ACPI: PCI Interrupt Link [APSJ] (IRQs 21) *0 [ 0.359360] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none [ 0.359364] vgaarb: loaded [ 0.359452] SCSI subsystem initialized [ 0.359527] libata version 3.00 loaded. [ 0.359586] usbcore: registered new interface driver usbfs [ 0.359595] usbcore: registered new interface driver hub [ 0.359616] usbcore: registered new device driver usb [ 0.359727] ACPI: WMI: Mapper loaded [ 0.359728] PCI: Using ACPI for IRQ routing [ 0.359842] NetLabel: Initializing [ 0.359843] NetLabel: domain hash size = 128 [ 0.359844] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.359859] NetLabel: unlabeled traffic allowed by default [ 0.359891] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31 [ 0.359895] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.380061] Switching to clocksource hpet [ 0.381468] AppArmor: AppArmor Filesystem Enabled [ 0.381486] pnp: PnP ACPI init [ 0.381502] ACPI: bus type pnp registered [ 0.384943] pnp: PnP ACPI: found 11 devices [ 0.384944] ACPI: ACPI bus type pnp unregistered [ 0.384955] system 00:01: ioport range 0x1000-0x107f has been reserved [ 0.384957] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 0.384960] system 00:01: ioport range 0x1400-0x147f has been reserved [ 0.384962] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 0.384964] system 00:01: ioport range 0x1800-0x187f has been reserved [ 0.384966] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 0.384974] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.384976] system 00:02: ioport range 0x800-0x87f has been reserved [ 0.384979] system 00:02: ioport range 0x294-0x297 has been reserved [ 0.384985] system 00:09: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.384989] system 00:0a: iomem range 0xfefff000-0xfefff0ff has been reserved [ 0.384992] system 00:0a: iomem range 0xffff0000-0xffffffff has been reserved [ 0.384994] system 00:0a: iomem range 0xd7f00000-0xdfefffff could not be reserved [ 0.384996] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.384999] system 00:0a: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.385001] system 00:0a: iomem range 0xfefff000-0xfeffffff could not be reserved [ 0.385004] system 00:0a: iomem range 0xfff80000-0xfff80fff has been reserved [ 0.385006] system 00:0a: iomem range 0xfff90000-0xfffbffff has been reserved [ 0.385009] system 00:0a: iomem range 0xfffed000-0xfffeffff has been reserved [ 0.389689] pci 0000:01:0a.0: BAR 6: address space collision on of device [0xfd9c0000-0xfd9dffff] [ 0.389706] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01 [ 0.389708] pci 0000:00:04.0: IO window: 0xb000-0xbfff [ 0.389711] pci 0000:00:04.0: MEM window: 0xfd900000-0xfd9fffff [ 0.389714] pci 0000:00:04.0: PREFETCH window: 0xfde00000-0xfdefffff [ 0.389718] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02 [ 0.389720] pci 0000:00:09.0: IO window: 0xa000-0xafff [ 0.389722] pci 0000:00:09.0: MEM window: 0xfdd00000-0xfddfffff [ 0.389724] pci 0000:00:09.0: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff [ 0.389727] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03 [ 0.389729] pci 0000:00:0b.0: IO window: 0x9000-0x9fff [ 0.389732] pci 0000:00:0b.0: MEM window: 0xfdb00000-0xfdbfffff [ 0.389734] pci 0000:00:0b.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff [ 0.389742] pci 0000:00:04.0: setting latency timer to 64 [ 0.389746] pci 0000:00:09.0: setting latency timer to 64 [ 0.389749] pci 0000:00:0b.0: setting latency timer to 64 [ 0.389752] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.389754] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.389756] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] [ 0.389758] pci_bus 0000:01: resource 1 mem: [0xfd900000-0xfd9fffff] [ 0.389760] pci_bus 0000:01: resource 2 pref mem [0xfde00000-0xfdefffff] [ 0.389762] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.389764] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.389766] pci_bus 0000:02: resource 0 io: [0xa000-0xafff] [ 0.389768] pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff] [ 0.389770] pci_bus 0000:02: resource 2 pref mem [0xfdc00000-0xfdcfffff] [ 0.389772] pci_bus 0000:03: resource 0 io: [0x9000-0x9fff] [ 0.389774] pci_bus 0000:03: resource 1 mem: [0xfdb00000-0xfdbfffff] [ 0.389776] pci_bus 0000:03: resource 2 pref mem [0xfda00000-0xfdafffff] [ 0.389808] NET: Registered protocol family 2 [ 0.389998] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.391460] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.394882] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.395311] TCP: Hash tables configured (established 524288 bind 65536) [ 0.395313] TCP reno registered [ 0.395402] NET: Registered protocol family 1 [ 0.410100] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.410146] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.410200] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.410252] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.410303] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.410359] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.410418] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.410423] pci 0000:00:0d.0: Boot video device [ 0.410549] PCI-DMA: Disabling AGP. [ 0.410618] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.410619] PCI-DMA: using GART IOMMU. [ 0.410622] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.411263] Scanning for low memory corruption every 60 seconds [ 0.411391] audit: initializing netlink socket (disabled) [ 0.411401] type=2000 audit(1274895886.410:1): initialized [ 0.418284] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.419322] VFS: Disk quotas dquot_6.5.2 [ 0.419366] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.419840] fuse init (API version 7.13) [ 0.419902] msgmni has been set to 7655 [ 0.420093] alg: No test for stdrng (krng) [ 0.420134] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.420137] io scheduler noop registered [ 0.420138] io scheduler anticipatory registered [ 0.420140] io scheduler deadline registered [ 0.420171] io scheduler cfq registered (default) [ 0.420290] alloc irq_desc for 24 on node 0 [ 0.420291] alloc kstat_irqs on node 0 [ 0.420298] pcieport 0000:00:09.0: irq 24 for MSI/MSI-X [ 0.420302] pcieport 0000:00:09.0: setting latency timer to 64 [ 0.420378] alloc irq_desc for 25 on node 0 [ 0.420380] alloc kstat_irqs on node 0 [ 0.420383] pcieport 0000:00:0b.0: irq 25 for MSI/MSI-X [ 0.420386] pcieport 0000:00:0b.0: setting latency timer to 64 [ 0.420429] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.420447] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.420536] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.420539] ACPI: Power Button [PWRB] [ 0.420584] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.420586] ACPI: Power Button [PWRF] [ 0.420629] fan PNP0C0B:00: registered as cooling_device0 [ 0.420633] ACPI: Fan [FAN] (on) [ 0.420984] processor LNXCPU:00: registered as cooling_device1 [ 0.421010] processor LNXCPU:01: registered as cooling_device2 [ 0.424271] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.424277] ACPI: Thermal Zone [THRM] (53 C) [ 0.425396] Linux agpgart interface v0.103 [ 0.425422] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.426354] brd: module loaded [ 0.426715] loop: module loaded [ 0.426785] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.426994] pata_acpi 0000:00:06.0: setting latency timer to 64 [ 0.427321] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20 [ 0.427325] alloc irq_desc for 20 on node 0 [ 0.427326] alloc kstat_irqs on node 0 [ 0.427336] pata_acpi 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20 [ 0.427356] pata_acpi 0000:00:08.0: setting latency timer to 64 [ 0.427362] pata_acpi 0000:00:08.0: PCI INT A disabled [ 0.427636] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21 [ 0.427638] alloc irq_desc for 21 on node 0 [ 0.427639] alloc kstat_irqs on node 0 [ 0.427646] pata_acpi 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 21 (level, low) -> IRQ 21 [ 0.427658] pata_acpi 0000:00:08.1: setting latency timer to 64 [ 0.427663] pata_acpi 0000:00:08.1: PCI INT B disabled [ 0.427958] Fixed MDIO Bus: probed [ 0.427984] PPP generic driver version 2.4.2 [ 0.428013] tun: Universal TUN/TAP device driver, 1.6 [ 0.428014] tun: (C) 1999-2004 Max Krasnyansky [ 0.428080] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.428357] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23 [ 0.428359] alloc irq_desc for 23 on node 0 [ 0.428360] alloc kstat_irqs on node 0 [ 0.428366] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 23 (level, low) -> IRQ 23 [ 0.428385] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.428388] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.428415] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.428442] ehci_hcd 0000:00:02.1: debug port 1 [ 0.428448] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.428468] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfe02e000 [ 0.440014] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.440081] usb usb1: configuration #1 chosen from 1 choice [ 0.440103] hub 1-0:1.0: USB hub found [ 0.440110] hub 1-0:1.0: 10 ports detected [ 0.440164] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.440460] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 [ 0.440463] alloc irq_desc for 22 on node 0 [ 0.440464] alloc kstat_irqs on node 0 [ 0.440470] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level, low) -> IRQ 22 [ 0.440478] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.440480] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.440509] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.440529] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe02f000 [ 0.453684] Freeing initrd memory: 8137k freed [ 0.502071] usb usb2: configuration #1 chosen from 1 choice [ 0.502091] hub 2-0:1.0: USB hub found [ 0.502097] hub 2-0:1.0: 10 ports detected [ 0.502145] uhci_hcd: USB Universal Host Controller Interface driver [ 0.502199] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.502200] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.502747] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.502804] mice: PS/2 mouse device common for all mice [ 0.502881] rtc_cmos 00:05: RTC can wake from S4 [ 0.502911] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.502946] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 0.503040] device-mapper: uevent: version 1.0.3 [ 0.503153] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.503228] device-mapper: multipath: version 1.1.0 loaded [ 0.503230] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.503403] cpuidle: using governor ladder [ 0.503404] cpuidle: using governor menu [ 0.503682] TCP cubic registered [ 0.503772] NET: Registered protocol family 10 [ 0.504142] lo: Disabled Privacy Extensions [ 0.504381] NET: Registered protocol family 17 [ 0.504409] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ processors (2 cpu cores) (version 2.20.00) [ 0.504454] powernow-k8: 0 : fid 0x14 (2800 MHz), vid 0xa [ 0.504455] powernow-k8: 1 : fid 0x12 (2600 MHz), vid 0xc [ 0.504457] powernow-k8: 2 : fid 0x10 (2400 MHz), vid 0xe [ 0.504459] powernow-k8: 3 : fid 0xe (2200 MHz), vid 0x10 [ 0.504460] powernow-k8: 4 : fid 0xc (2000 MHz), vid 0x10 [ 0.504462] powernow-k8: 5 : fid 0xa (1800 MHz), vid 0x10 [ 0.504464] powernow-k8: 6 : fid 0x2 (1000 MHz), vid 0x12 [ 0.504550] PM: Resume from disk failed. [ 0.504560] registered taskstats version 1 [ 0.504804] Magic number: 10:435:745 [ 0.504889] rtc_cmos 00:05: setting system clock to 2010-05-26 17:44:47 UTC (1274895887) [ 0.504892] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.504893] EDD information not available. [ 0.504944] Freeing unused kernel memory: 876k freed [ 0.505345] Write protecting the kernel read-only data: 7680k [ 0.518815] udev: starting version 151 [ 0.531259] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.567648] sata_nv 0000:00:08.0: version 3.5 [ 0.567661] sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20 [ 0.567717] sata_nv 0000:00:08.0: setting latency timer to 64 [ 0.573918] scsi0 : sata_nv [ 0.591393] scsi1 : sata_nv [ 0.591605] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 20 [ 0.591608] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 20 [ 0.608629] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 0.610177] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 [ 0.610185] forcedeth 0000:00:07.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23 [ 0.610189] forcedeth 0000:00:07.0: setting latency timer to 64 [ 0.610929] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 0.610933] alloc irq_desc for 18 on node 0 [ 0.610934] alloc kstat_irqs on node 0 [ 0.610943] skge 0000:01:0a.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 0.610972] skge 1.13 addr 0xfd9f8000 irq 18 chip Yukon-Lite rev 9 [ 0.611558] skge eth0: addr 00:1b:11:b2:6c:04 [ 0.760019] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 0.950698] usb 1-1: configuration #1 chosen from 1 choice [ 0.972453] Initializing USB Mass Storage driver... [ 0.972724] scsi2 : SCSI emulation for USB Mass Storage devices [ 0.972851] usbcore: registered new interface driver usb-storage [ 0.972853] USB Mass Storage support registered. [ 0.972858] usb-storage: device found at 2 [ 0.972859] usb-storage: waiting for device to settle before scanning [ 1.080036] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.100114] ata1.00: ATA-7: SAMSUNG HD400LJ, ZZ100-15, max UDMA7 [ 1.100117] ata1.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.120121] ata1.00: configured for UDMA/133 [ 1.120206] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD400LJ ZZ10 PQ: 0 ANSI: 5 [ 1.120345] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.120388] sd 0:0:0:0: [sda] 781422768 512-byte logical blocks: (400 GB/372 GiB) [ 1.120447] sd 0:0:0:0: [sda] Write Protect is off [ 1.120450] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.120467] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.120574] sda: [ 1.140883] forcedeth 0000:00:07.0: ifname eth1, PHY OUI 0x732 @ 1, addr 00:1d:60:c1:67:74 [ 1.140886] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3 [ 1.140974] pata_amd 0000:00:06.0: version 0.4.1 [ 1.141010] pata_amd 0000:00:06.0: setting latency timer to 64 [ 1.141081] scsi3 : pata_amd [ 1.141136] scsi4 : pata_amd [ 1.141714] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 1.141717] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 1.141788] sata_nv 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 21 (level, low) -> IRQ 21 [ 1.141835] sata_nv 0000:00:08.1: setting latency timer to 64 [ 1.141879] scsi5 : sata_nv [ 1.141932] scsi6 : sata_nv [ 1.142073] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 21 [ 1.142075] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 21 [ 1.143420] sda1 sda2 < [ 1.150022] usb 1-9: new high speed USB device using ehci_hcd and address 4 [ 1.170684] sda5 > [ 1.170926] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.301935] usb 1-9: configuration #1 chosen from 1 choice [ 1.303221] scsi7 : SCSI emulation for USB Mass Storage devices [ 1.303456] usb-storage: device found at 4 [ 1.303458] usb-storage: waiting for device to settle before scanning [ 1.376024] ata3.01: ATA-7: ST3750640A, 3.AAE, max UDMA/100 [ 1.376026] ata3.01: 1465149168 sectors, multi 16: LBA48 [ 1.376044] ata3: nv_mode_filter: 0x3f39f&0x739f->0x739f, BIOS=0x7000 (0xc00000) ACPI=0x701f (600:60:0x1c) [ 1.467375] ata3.01: configured for UDMA/33 [ 1.600032] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.620032] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.620231] ata2.00: ATAPI: TSSTcorp CDDVDW TS-H653N, 0609, max UDMA/33 [ 1.640016] usb 2-6: new low speed USB device using ohci_hcd and address 2 [ 1.660177] ata2.00: configured for UDMA/33 [ 1.681200] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-H653N 0609 PQ: 0 ANSI: 5 [ 1.685175] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.685177] Uniform CD-ROM driver Revision: 3.20 [ 1.685254] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.685304] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.685403] scsi 3:0:1:0: Direct-Access ATA ST3750640A 3.AA PQ: 0 ANSI: 5 [ 1.685496] sd 3:0:1:0: Attached scsi generic sg2 type 0 [ 1.685505] sd 3:0:1:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 1.685556] ata4: port disabled. ignoring. [ 1.685603] sd 3:0:1:0: [sdb] Write Protect is off [ 1.685606] sd 3:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.685624] sd 3:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.685738] sdb: sdb1 sdb2 [ 1.706426] sd 3:0:1:0: [sdb] Attached SCSI disk [ 1.879085] usb 2-6: configuration #1 chosen from 1 choice [ 1.884947] ata5.00: ATA-8: WDC WD10EACS-00ZJB0, 01.01B01, max UDMA/133 [ 1.884950] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.886442] usbcore: registered new interface driver hiddev [ 1.906301] input: Western Digital External HDD as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.1/input/input4 [ 1.906364] generic-usb 0003:1058:0903.0001: input,hidraw0: USB HID v1.11 Device [Western Digital External HDD] on usb-0000:00:02.1-1/input1 [ 1.916258] input: Microsoft Microsoft® 2.4GHz Transceiver V1.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.0/input/input5 [ 1.916305] generic-usb 0003:045E:071D.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver V1.0] on usb-0000:00:02.0-6/input0 [ 1.920390] ata5.00: configured for UDMA/133 [ 1.920477] scsi 5:0:0:0: Direct-Access ATA WDC WD10EACS-00Z 01.0 PQ: 0 ANSI: 5 [ 1.920612] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 1.920648] sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.920712] sd 5:0:0:0: [sdc] Write Protect is off [ 1.920714] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.920732] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.920840] sdc: [ 1.930161] sd 5:0:0:0: [sdc] Attached SCSI disk [ 1.986169] input: Microsoft Microsoft® 2.4GHz Transceiver V1.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.1/input/input6 [ 1.986266] generic-usb 0003:045E:071D.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver V1.0] on usb-0000:00:02.0-6/input1 [ 1.986290] usbcore: registered new interface driver usbhid [ 1.986292] usbhid: v2.6:USB HID core driver [ 2.650035] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.694981] ata6.00: ATA-8: WDC WD10EACS-00ZJB0, 01.01B01, max UDMA/133 [ 2.694984] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.730949] ata6.00: configured for UDMA/133 [ 2.731035] scsi 6:0:0:0: Direct-Access ATA WDC WD10EACS-00Z 01.0 PQ: 0 ANSI: 5 [ 2.731184] sd 6:0:0:0: Attached scsi generic sg4 type 0 [ 2.731205] sd 6:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.731284] sd 6:0:0:0: [sdd] Write Protect is off [ 2.731287] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.731304] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.731424] sdd: sdd1 [ 2.740181] sd 6:0:0:0: [sdd] Attached SCSI disk [ 2.746372] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 2.746378] alloc irq_desc for 19 on node 0 [ 2.746380] alloc kstat_irqs on node 0 [ 2.746389] ohci1394 0000:01:05.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 2.812063] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[fd9ff000-fd9ff7ff] Max Packet=[1024] IR/IT contexts=[8/8] [ 2.951948] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 2.951952] EXT4-fs (sda1): write access will be enabled during recovery [ 3.154389] EXT4-fs (sda1): orphan cleanup on readonly fs [ 3.154398] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5243039 [ 3.154467] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5243033 [ 3.171737] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5243001 [ 3.171756] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5242991 [ 3.171771] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5242987 [ 3.171786] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5242985 [ 3.171803] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5242925 [ 3.171851] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5242901 [ 3.171867] EXT4-fs (sda1): 8 orphan inodes deleted [ 3.171869] EXT4-fs (sda1): recovery complete [ 3.476329] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 4.140111] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000188262a] [ 4.968916] Adding 11506680k swap on /dev/sda5. Priority:-1 extents:1 across:11506680k [ 5.330356] udev: starting version 151 [ 5.976030] usb-storage: device scan complete [ 5.982019] scsi 2:0:0:0: Direct-Access WD 5000AA External 200i PQ: 0 ANSI: 4 [ 5.982818] sd 2:0:0:0: Attached scsi generic sg5 type 0 [ 5.990642] sd 2:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 5.995253] sd 2:0:0:0: [sde] Write Protect is off [ 5.995255] sd 2:0:0:0: [sde] Mode Sense: 10 00 00 00 [ 5.995257] sd 2:0:0:0: [sde] Assuming drive cache: write through [ 6.007627] sd 2:0:0:0: [sde] Assuming drive cache: write through [ 6.007680] sde: [ 6.020379] sd 2:0:0:0: [sde] Assuming drive cache: write through [ 6.020433] sd 2:0:0:0: [sde] Attached SCSI disk [ 6.302662] usb-storage: device scan complete [ 6.303262] scsi 7:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 6.303878] scsi 7:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 6.304502] scsi 7:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 6.305126] scsi 7:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 6.305859] sd 7:0:0:0: Attached scsi generic sg6 type 0 [ 6.307310] sd 7:0:0:0: [sdf] Attached SCSI removable disk [ 6.308442] sd 7:0:0:1: Attached scsi generic sg7 type 0 [ 6.309529] sd 7:0:0:2: Attached scsi generic sg8 type 0 [ 6.309939] sd 7:0:0:3: Attached scsi generic sg9 type 0 [ 6.310596] sd 7:0:0:1: [sdg] Attached SCSI removable disk [ 6.312132] sd 7:0:0:2: [sdh] Attached SCSI removable disk [ 6.313497] sd 7:0:0:3: [sdi] Attached SCSI removable disk [ 6.367953] lp: driver loaded but no devices found [ 7.215264] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 7.217785] i2c i2c-0: nForce2 SMBus adapter at 0x1c00 [ 7.217845] i2c i2c-1: nForce2 SMBus adapter at 0x1c40 [ 7.485348] EDAC MC: Ver: 2.1.0 Apr 28 2010 [ 7.645987] [drm] Initialized drm 1.1.0 20060810 [ 7.726994] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 22 [ 7.727000] nouveau 0000:00:0d.0: PCI INT A -> Link[AIGP] -> GSI 22 (level, low) -> IRQ 22 [ 7.727004] nouveau 0000:00:0d.0: setting latency timer to 64 [ 7.729812] [drm] nouveau 0000:00:0d.0: Detected an NV40 generation card (0x04c000a2) [ 7.730343] [drm] nouveau 0000:00:0d.0: Attempting to load BIOS image from PROM [ 7.730346] [drm] nouveau 0000:00:0d.0: ... BIOS signature not found [ 7.730348] [drm] nouveau 0000:00:0d.0: Attempting to load BIOS image from PRAMIN [ 7.768574] [drm] nouveau 0000:00:0d.0: ... appears to be valid [ 7.768577] [drm] nouveau 0000:00:0d.0: BIT BIOS found [ 7.768579] [drm] nouveau 0000:00:0d.0: Bios version 05.61.32.25 [ 7.768582] [drm] nouveau 0000:00:0d.0: BIT table 'd' not found [ 7.768584] [drm] nouveau 0000:00:0d.0: Found Display Configuration Block version 3.0 [ 7.768587] [drm] nouveau 0000:00:0d.0: DCB connector table: VHER 0x30 5 10 2 [ 7.768589] [drm] nouveau 0000:00:0d.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff [ 7.768592] [drm] nouveau 0000:00:0d.0: 1: 0x00001131: type 0x31 idx 1 tag 0x07 [ 7.768594] [drm] nouveau 0000:00:0d.0: 2: 0x00000110: type 0x10 idx 1 tag 0xff [ 7.768596] [drm] nouveau 0000:00:0d.0: 3: 0x00000111: type 0x11 idx 1 tag 0xff [ 7.768598] [drm] nouveau 0000:00:0d.0: 4: 0x00000113: type 0x13 idx 1 tag 0xff [ 7.768600] [drm] nouveau 0000:00:0d.0: Raw DCB entry 0: 01000310 00000023 [ 7.768603] [drm] nouveau 0000:00:0d.0: Raw DCB entry 1: 00110204 98830003 [ 7.768608] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 0 at offset 0xDEB3 [ 7.768611] [drm] nouveau 0000:00:0d.0: ======= misaligned reg 0x0060081D ======= [ 7.768667] [drm] nouveau 0000:00:0d.0: ======= misaligned reg 0x0060081D ======= [ 7.768761] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 1 at offset 0xE00A [ 7.768763] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 2 at offset 0xE00B [ 7.768810] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 3 at offset 0xE18D [ 7.768814] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 4 at offset 0xE1D6 [ 7.773000] [TTM] Zone kernel: Available graphics memory: 1964382 kiB. [ 7.773010] [drm] nouveau 0000:00:0d.0: 128 MiB VRAM [ 7.773609] [drm] nouveau 0000:00:0d.0: 64 MiB GART (aperture) [ 7.774042] [drm] nouveau 0000:00:0d.0: Allocating FIFO number 0 [ 7.774285] [drm] nouveau 0000:00:0d.0: nouveau_channel_alloc: initialised FIFO 0 [ 7.774291] [drm] nouveau 0000:00:0d.0: Initial CRTC_OWNER is 0 [ 7.774295] [drm] nouveau 0000:00:0d.0: Saving VGA fonts [ 7.808637] [drm] nouveau 0000:00:0d.0: DCB type 4 not known [ 7.808640] [drm] nouveau 0000:00:0d.0: Detected a VGA connector [ 7.809534] [drm] nouveau 0000:00:0d.0: Setting dpms mode 3 on vga encoder (output 0) [ 7.890014] [drm] nouveau 0000:00:0d.0: Load detected on output A [ 7.890187] [drm] nouveau 0000:00:0d.0: allocated 1024x768 fb: 0x49000, bo ffff880106290e00 [ 7.890301] fb0: nouveaufb frame buffer device [ 7.890302] registered panic notifier [ 7.890307] [drm] Initialized nouveau 0.0.15 20090420 for 0000:00:0d.0 on minor 0 [ 7.991684] EDAC amd64_edac: Ver: 3.2.0 Apr 28 2010 [ 7.991972] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 7.991980] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 7.991981] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 7.991983] (Note that use of the override may cause unknown side effects.) [ 7.992000] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 8.034037] vga16fb: initializing [ 8.034041] vga16fb: mapped to 0xffff8800000a0000 [ 8.034046] vga16fb: not registering due to another framebuffer present [ 8.191569] type=1505 audit(1274921095.185:2): operation="profile_load" pid=622 name="/sbin/dhclient3" [ 8.191774] type=1505 audit(1274921095.185:3): operation="profile_load" pid=622 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 8.191887] type=1505 audit(1274921095.185:4): operation="profile_load" pid=622 name="/usr/lib/connman/scripts/dhclient-script" [ 9.000393] [drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0) [ 9.000397] [drm] nouveau 0000:00:0d.0: Output VGA-1 is running on CRTC 0 using output A [ 9.001925] Console: switching to colour frame buffer device 128x48 [ 10.555561] skge eth0: enabling interface [ 10.559195] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.561749] alloc irq_desc for 26 on node 0 [ 10.561753] alloc kstat_irqs on node 0 [ 10.561761] forcedeth 0000:00:07.0: irq 26 for MSI/MSI-X [ 11.166824] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23 [ 11.166830] HDA Intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 23 (level, low) -> IRQ 23 [ 11.166833] hda_intel: Disable MSI for Nvidia chipset [ 11.166875] HDA Intel 0000:00:05.0: setting latency timer to 64 [ 12.790016] hda_codec: ALC1200: BIOS auto-probing. [ 12.942508] type=1505 audit(1274921099.935:5): operation="profile_load" pid=1078 name="/usr/share/gdm/guest-session/Xsession" [ 12.943973] type=1505 audit(1274921099.935:6): operation="profile_replace" pid=1081 name="/sbin/dhclient3" [ 12.944177] type=1505 audit(1274921099.935:7): operation="profile_replace" pid=1081 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 12.944300] type=1505 audit(1274921099.935:8): operation="profile_replace" pid=1081 name="/usr/lib/connman/scripts/dhclient-script" [ 13.080993] type=1505 audit(1274921100.075:9): operation="profile_load" pid=1082 name="/usr/bin/evince" [ 13.083602] type=1505 audit(1274921100.075:10): operation="profile_load" pid=1082 name="/usr/bin/evince-previewer" [ 13.085222] type=1505 audit(1274921100.075:11): operation="profile_load" pid=1082 name="/usr/bin/evince-thumbnailer" [ 13.207091] type=1505 audit(1274921100.195:12): operation="profile_load" pid=1084 name="/usr/lib/cups/backend/cups-pdf" [ 13.207353] type=1505 audit(1274921100.195:13): operation="profile_load" pid=1084 name="/usr/sbin/cupsd" [ 13.296637] type=1505 audit(1274921100.285:14): operation="profile_load" pid=1085 name="/usr/sbin/tcpdump" [ 13.420044] [drm] nouveau 0000:00:0d.0: Load detected on output A [ 13.480023] [drm] nouveau 0000:00:0d.0: Load detected on output A [ 13.563175] [drm] nouveau 0000:00:0d.0: Allocating FIFO number 1 [ 13.563392] [drm] nouveau 0000:00:0d.0: nouveau_channel_alloc: initialised FIFO 1 [ 13.610112] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input7 [ 13.673726] skge eth0: Link is up at 100 Mbps, full duplex, flow control both [ 13.674289] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 15.621123] ppdev: user-space parallel port driver [ 19.010061] [drm] nouveau 0000:00:0d.0: Load detected on output A [ 19.070011] [drm] nouveau 0000:00:0d.0: Load detected on output A [ 19.130016] [drm] nouveau 0000:00:0d.0: Load detected on output A [ 20.650015] eth1: no IPv6 routers present [ 24.301502] eth0: no IPv6 routers present [ 25.750025] [drm] nouveau 0000:00:0d.0: Load detected on output A [ 79.010024] Clocksource tsc unstable (delta = -229579671 ns) [ 2430.933630] type=1505 audit(1274923516.570:15): operation="profile_replace" pid=8801 name="/usr/bin/evince" [ 2430.934854] type=1505 audit(1274923516.570:16): operation="profile_replace" pid=8801 name="/usr/bin/evince-previewer" [ 2430.935638] type=1505 audit(1274923516.570:17): operation="profile_replace" pid=8801 name="/usr/bin/evince-thumbnailer" [ 4517.020038] [drm] nouveau 0000:00:0d.0: Load detected on output A