[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-15-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #50-Ubuntu SMP Tue Nov 10 14:54:29 UTC 2009 (Ubuntu 2.6.31-15.50-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003dff0000 (usable) [ 0.000000] BIOS-e820: 000000003dff0000 - 000000003dffffc0 (ACPI data) [ 0.000000] BIOS-e820: 000000003dffffc0 - 000000003e000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.2 present. [ 0.000000] last_pfn = 0x3dff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 03E000000 mask FFE000000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003dff0000 (usable) [ 0.000000] modified: 000000003dff0000 - 000000003dffffc0 (ACPI data) [ 0.000000] modified: 000000003dffffc0 - 000000003e000000 (ACPI NVS) [ 0.000000] modified: 00000000fffc0000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 378a3000 - 37fef900 [ 0.000000] Allocated new RAMDISK: 008ad000 - 00ff9900 [ 0.000000] Move RAMDISK from 00000000378a3000 - 0000000037fef8ff to 008ad000 - 00ff98ff [ 0.000000] ACPI: RSDP 000e4010 00014 (v00 OID_00) [ 0.000000] ACPI: RSDT 3dfffbd0 0002C (v01 OID_00 RSDT_000 30303030 _CSI 00010101) [ 0.000000] ACPI: FACP 3dfffb20 00074 (v01 INSYDE FACP_000 00000100 _CSI 00010101) [ 0.000000] ACPI: DSDT 3dffabe0 04F3E (v01 INSYDE KENORAA3 00001004 MSFT 02000001) [ 0.000000] ACPI: FACS 3dffffc0 00040 [ 0.000000] ACPI: BOOT 3dfffba0 00026 (v01 INSYDE SYS_BOOT 00000100 _CSI 00010101) [ 0.000000] 103MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00008a9000 - 00008ac1dc] BRK ==> [00008a9000 - 00008ac1dc] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008ad000 - 0000ff9900] NEW RAMDISK ==> [00008ad000 - 0000ff9900] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003dff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003dff0 [ 0.000000] On node 0 totalpages: 253835 [ 0.000000] free_area_init_node: node 0, pgdat c0784940, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 208 pages used for memmap [ 0.000000] HighMem zone: 26402 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 3e000000 (gap: 3e000000:c1fc0000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c17c4000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 251851 [ 0.000000] Kernel command line: root=UUID=dfa0f06d-748b-4f1e-a750-3011f3f2d6f4 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5078720 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003dff0) [ 0.000000] Memory: 985872k/1015744k available (4566k kernel code, 29124k reserved, 2142k data, 540k init, 106440k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575b44 - 0xc078d3c8 (2142 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575b44 (4566 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1593.215 MHz processor. [ 0.001407] Console: colour VGA+ 80x25 [ 0.001411] console [tty0] enabled [ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3186.43 BogoMIPS (lpj=6372860) [ 0.004032] Security Framework initialized [ 0.004059] AppArmor: AppArmor initialized [ 0.004068] Mount-cache hash table entries: 512 [ 0.004214] Initializing cgroup subsys ns [ 0.004220] Initializing cgroup subsys cpuacct [ 0.004225] Initializing cgroup subsys memory [ 0.004235] Initializing cgroup subsys freezer [ 0.004238] Initializing cgroup subsys net_cls [ 0.004256] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004260] CPU: L2 cache: 2048K [ 0.004265] mce: CPU supports 5 MCE banks [ 0.004274] ------------[ cut here ]------------ [ 0.004285] WARNING: at /build/buildd/linux-2.6.31/arch/x86/kernel/apic/apic.c:247 native_apic_write_dummy+0x33/0x40() [ 0.004289] Hardware name: M350C/M375C [ 0.004291] Modules linked in: [ 0.004297] Pid: 0, comm: swapper Not tainted 2.6.31-15-generic #50-Ubuntu [ 0.004300] Call Trace: [ 0.004310] [] warn_slowpath_common+0x6d/0xa0 [ 0.004316] [] ? native_apic_write_dummy+0x33/0x40 [ 0.004321] [] ? native_apic_write_dummy+0x33/0x40 [ 0.004326] [] warn_slowpath_null+0x15/0x20 [ 0.004331] [] native_apic_write_dummy+0x33/0x40 [ 0.004337] [] intel_init_thermal+0xac/0x1a0 [ 0.004343] [] mce_intel_feature_init+0xb/0x60 [ 0.004347] [] mce_cpu_features+0x10/0x40 [ 0.004355] [] mcheck_init+0x14a/0x188 [ 0.004360] [] ? init_hypervisor+0xb/0x2c [ 0.004364] [] identify_cpu+0x20e/0x21d [ 0.004371] [] identify_boot_cpu+0xd/0x23 [ 0.004376] [] check_bugs+0xb/0xe9 [ 0.004382] [] start_kernel+0x2dc/0x2ec [ 0.004387] [] ? unknown_bootoption+0x0/0x1ab [ 0.004392] [] i386_start_kernel+0x7c/0x83 [ 0.004402] ---[ end trace a7919e7f17c0a725 ]--- [ 0.004406] CPU0: Thermal monitoring enabled (TM1) [ 0.004416] Performance Counters: [ 0.004419] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.004422] no hardware sampling interrupt available. [ 0.004424] p6 PMU driver. [ 0.004431] ... version: 0 [ 0.004433] ... bit width: 32 [ 0.004435] ... generic counters: 2 [ 0.004438] ... value mask: 00000000ffffffff [ 0.004440] ... max period: 000000007fffffff [ 0.004443] ... fixed-purpose counters: 0 [ 0.004445] ... counter mask: 0000000000000003 [ 0.004450] Checking 'hlt' instruction... OK. [ 0.020894] SMP alternatives: switching to UP code [ 0.028011] Freeing SMP alternatives: 19k freed [ 0.028020] ACPI: Core revision 20090521 [ 0.037227] ACPI: setting ELCR to 0200 (from 0c00) [ 0.040069] weird, boot CPU (#0) not listed by the BIOS. [ 0.040072] SMP motherboard not detected. [ 0.040074] Local APIC not detected. Using dummy APIC emulation. [ 0.040077] SMP disabled [ 0.040203] Brought up 1 CPUs [ 0.040206] Total of 1 processors activated (3186.43 BogoMIPS). [ 0.040220] CPU0 attaching NULL sched-domain. [ 0.040454] Booting paravirtualized kernel on bare hardware [ 0.040699] regulator: core version 0.5 [ 0.040723] Time: 17:29:10 Date: 12/02/09 [ 0.040781] NET: Registered protocol family 16 [ 0.040932] EISA bus registered [ 0.040950] ACPI: bus type pci registered [ 0.041086] PCI: PCI BIOS revision 2.10 entry at 0xeb8f0, last bus=1 [ 0.041089] PCI: Using configuration type 1 for base access [ 0.042314] bio: create slab at 0 [ 0.044670] ACPI: EC: Look up EC in DSDT [ 0.048115] ACPI: Interpreter enabled [ 0.048124] ACPI: (supports S0 S3 S4 S5) [ 0.048148] ACPI: Using PIC for interrupt routing [ 0.052446] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.052450] ACPI: EC: driver started in poll mode [ 0.052629] ACPI: No dock devices found. [ 0.052699] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.052846] pci 0000:00:02.0: reg 10 32bit mmio: [0xa0000000-0xa7ffffff] [ 0.052852] pci 0000:00:02.0: reg 14 32bit mmio: [0xf0000000-0xf007ffff] [ 0.052858] pci 0000:00:02.0: reg 18 io port: [0xe000-0xe007] [ 0.052878] pci 0000:00:02.0: supports D1 [ 0.052897] pci 0000:00:02.1: reg 10 32bit mmio: [0xa8000000-0xafffffff] [ 0.052903] pci 0000:00:02.1: reg 14 32bit mmio: [0xf0100000-0xf017ffff] [ 0.052925] pci 0000:00:02.1: supports D1 [ 0.052994] pci 0000:00:1d.0: reg 20 io port: [0xe120-0xe13f] [ 0.053045] pci 0000:00:1d.1: reg 20 io port: [0xe240-0xe25f] [ 0.053094] pci 0000:00:1d.2: reg 20 io port: [0xe360-0xe37f] [ 0.053150] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0080000-0xf00803ff] [ 0.053203] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.053209] pci 0000:00:1d.7: PME# disabled [ 0.053289] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 0.053294] pci 0000:00:1f.0: quirk: region 1300-133f claimed by ICH4 GPIO [ 0.053317] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.053324] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.053331] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.053339] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.053346] pci 0000:00:1f.1: reg 20 io port: [0x1100-0x110f] [ 0.053353] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] [ 0.053393] pci 0000:00:1f.5: reg 10 io port: [0xe600-0xe6ff] [ 0.053400] pci 0000:00:1f.5: reg 14 io port: [0xe800-0xe83f] [ 0.053407] pci 0000:00:1f.5: reg 18 32bit mmio: [0xf0180000-0xf01801ff] [ 0.053414] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xf0180200-0xf01802ff] [ 0.053441] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.053446] pci 0000:00:1f.5: PME# disabled [ 0.053474] pci 0000:00:1f.6: reg 10 io port: [0xea00-0xeaff] [ 0.053481] pci 0000:00:1f.6: reg 14 io port: [0xec00-0xec7f] [ 0.053515] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.053519] pci 0000:00:1f.6: PME# disabled [ 0.053557] pci 0000:01:00.0: reg 10 io port: [0xc000-0xc0ff] [ 0.053564] pci 0000:01:00.0: reg 14 32bit mmio: [0xe0008000-0xe00080ff] [ 0.053600] pci 0000:01:00.0: supports D1 D2 [ 0.053603] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.053608] pci 0000:01:00.0: PME# disabled [ 0.053639] pci 0000:01:02.0: reg 10 32bit mmio: [0xe0001000-0xe00017ff] [ 0.053646] pci 0000:01:02.0: reg 14 32bit mmio: [0xe0004000-0xe0007fff] [ 0.053683] pci 0000:01:02.0: supports D1 D2 [ 0.053686] pci 0000:01:02.0: PME# supported from D0 D1 D2 D3hot [ 0.053691] pci 0000:01:02.0: PME# disabled [ 0.053721] pci 0000:01:03.0: reg 10 32bit mmio: [0xe0000000-0xe0000fff] [ 0.053762] pci 0000:01:03.0: PME# supported from D0 D3hot D3cold [ 0.053766] pci 0000:01:03.0: PME# disabled [ 0.053802] pci 0000:01:09.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.053820] pci 0000:01:09.0: supports D1 D2 [ 0.053823] pci 0000:01:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.053828] pci 0000:01:09.0: PME# disabled [ 0.053856] pci 0000:00:1e.0: transparent bridge [ 0.053861] pci 0000:00:1e.0: bridge io port: [0xc000-0xdfff] [ 0.053866] pci 0000:00:1e.0: bridge 32bit mmio: [0xe0000000-0xefffffff] [ 0.053872] pci 0000:00:1e.0: bridge 32bit mmio pref: [0x90000000-0x9fffffff] [ 0.053895] pci_bus 0000:00: on NUMA node 0 [ 0.053901] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.053981] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] [ 0.064898] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11) [ 0.065014] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11) [ 0.065126] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11) [ 0.065238] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11) [ 0.065337] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11) *0, disabled. [ 0.065437] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11) *0, disabled. [ 0.065537] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11) *0, disabled. [ 0.065650] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 *11) [ 0.065864] SCSI subsystem initialized [ 0.065915] libata version 3.00 loaded. [ 0.066000] usbcore: registered new interface driver usbfs [ 0.066019] usbcore: registered new interface driver hub [ 0.066047] usbcore: registered new device driver usb [ 0.066199] ACPI: WMI: Mapper loaded [ 0.066202] PCI: Using ACPI for IRQ routing [ 0.066363] Bluetooth: Core ver 2.15 [ 0.066392] NET: Registered protocol family 31 [ 0.066395] Bluetooth: HCI device and connection manager initialized [ 0.066399] Bluetooth: HCI socket layer initialized [ 0.066401] NetLabel: Initializing [ 0.066403] NetLabel: domain hash size = 128 [ 0.066405] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.066423] NetLabel: unlabeled traffic allowed by default [ 0.068600] pnp: PnP ACPI init [ 0.068621] ACPI: bus type pnp registered [ 0.070012] pnp: PnP ACPI: found 9 devices [ 0.070015] ACPI: ACPI bus type pnp unregistered [ 0.070020] PnPBIOS: Disabled by ACPI PNP [ 0.070037] system 00:05: iomem range 0xfff80000-0xffffffff could not be reserved [ 0.070045] system 00:07: ioport range 0x120-0x12f has been reserved [ 0.070049] system 00:07: ioport range 0x1000-0x107f has been reserved [ 0.070053] system 00:07: ioport range 0x1300-0x133f has been reserved [ 0.070057] system 00:07: ioport range 0x1400-0x141f has been reserved [ 0.104758] AppArmor: AppArmor Filesystem Enabled [ 0.104793] pci 0000:01:09.0: CardBus bridge, secondary bus 0000:02 [ 0.104796] pci 0000:01:09.0: IO window: 0x00c400-0x00c4ff [ 0.104802] pci 0000:01:09.0: IO window: 0x00c800-0x00c8ff [ 0.104807] pci 0000:01:09.0: PREFETCH window: 0x90000000-0x93ffffff [ 0.104812] pci 0000:01:09.0: MEM window: 0xe4000000-0xe7ffffff [ 0.104818] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 [ 0.104822] pci 0000:00:1e.0: IO window: 0xc000-0xdfff [ 0.104828] pci 0000:00:1e.0: MEM window: 0xe0000000-0xefffffff [ 0.104834] pci 0000:00:1e.0: PREFETCH window: 0x90000000-0x9fffffff [ 0.104847] pci 0000:00:1e.0: setting latency timer to 64 [ 0.105033] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 0.105037] PCI: setting IRQ 10 as level-triggered [ 0.105042] pci 0000:01:09.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 [ 0.105051] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.105054] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.105058] pci_bus 0000:01: resource 0 io: [0xc000-0xdfff] [ 0.105062] pci_bus 0000:01: resource 1 mem: [0xe0000000-0xefffffff] [ 0.105065] pci_bus 0000:01: resource 2 pref mem [0x90000000-0x9fffffff] [ 0.105069] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.105072] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff] [ 0.105076] pci_bus 0000:02: resource 0 io: [0xc400-0xc4ff] [ 0.105079] pci_bus 0000:02: resource 1 io: [0xc800-0xc8ff] [ 0.105083] pci_bus 0000:02: resource 2 pref mem [0x90000000-0x93ffffff] [ 0.105086] pci_bus 0000:02: resource 3 mem: [0xe4000000-0xe7ffffff] [ 0.105129] NET: Registered protocol family 2 [ 0.105240] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.105622] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.106972] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.107868] TCP: Hash tables configured (established 131072 bind 65536) [ 0.107872] TCP reno registered [ 0.108075] NET: Registered protocol family 1 [ 0.108176] Trying to unpack rootfs image as initramfs... [ 0.371134] Freeing initrd memory: 7474k freed [ 0.378506] Simple Boot Flag at 0x37 set to 0x1 [ 0.378633] cpufreq-nforce2: No nForce2 chipset. [ 0.378667] Scanning for low memory corruption every 60 seconds [ 0.378846] audit: initializing netlink socket (disabled) [ 0.378882] type=2000 audit(1259774950.376:1): initialized [ 0.389945] highmem bounce pool size: 64 pages [ 0.389953] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.391743] VFS: Disk quotas dquot_6.5.2 [ 0.391814] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.392501] fuse init (API version 7.12) [ 0.392605] msgmni has been set to 1732 [ 0.392845] alg: No test for stdrng (krng) [ 0.392861] io scheduler noop registered [ 0.392863] io scheduler anticipatory registered [ 0.392866] io scheduler deadline registered [ 0.392917] io scheduler cfq registered (default) [ 0.392938] pci 0000:00:02.0: Boot video device [ 0.393115] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.393144] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.393363] ACPI: AC Adapter [AC] (on-line) [ 0.393466] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 0.393476] ACPI: Sleep Button [SLPB] [ 0.393531] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.393536] ACPI: Power Button [PWRB] [ 0.393588] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 0.393624] ACPI: Lid Switch [LID0] [ 0.393995] Marking TSC unstable due to TSC halts in idle [ 0.394017] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 0.394051] processor LNXCPU:00: registered as cooling_device0 [ 0.394055] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.395985] ACPI: Battery Slot [BAT0] (battery absent) [ 0.396055] isapnp: Scanning for PnP cards... [ 0.396108] Switched to high resolution mode on CPU 0 [ 0.749797] isapnp: No Plug & Play device found [ 0.751087] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.751655] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 0.751659] PCI: setting IRQ 11 as level-triggered [ 0.751665] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 0.751673] serial 0000:00:1f.6: PCI INT B disabled [ 0.752817] brd: module loaded [ 0.753353] loop: module loaded [ 0.753437] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.753563] ata_piix 0000:00:1f.1: version 2.13 [ 0.753573] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 0.753754] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 [ 0.753759] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 0.753802] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.753892] scsi0 : ata_piix [ 0.753985] scsi1 : ata_piix [ 0.755105] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14 [ 0.755109] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15 [ 0.756555] Fixed MDIO Bus: probed [ 0.756598] PPP generic driver version 2.4.2 [ 0.756703] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.756905] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 [ 0.756910] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 [ 0.756925] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.756929] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.756987] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.760904] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.760911] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.760921] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf0080000 [ 0.776025] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.776128] usb usb1: configuration #1 chosen from 1 choice [ 0.776165] hub 1-0:1.0: USB hub found [ 0.776173] hub 1-0:1.0: 6 ports detected [ 0.776243] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.776262] uhci_hcd: USB Universal Host Controller Interface driver [ 0.776291] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 [ 0.776297] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.776301] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.776339] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.776361] uhci_hcd 0000:00:1d.0: irq 10, io base 0x0000e120 [ 0.776446] usb usb2: configuration #1 chosen from 1 choice [ 0.776480] hub 2-0:1.0: USB hub found [ 0.776489] hub 2-0:1.0: 2 ports detected [ 0.776714] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.776719] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 0.776725] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.776729] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.776763] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.776784] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000e240 [ 0.776878] usb usb3: configuration #1 chosen from 1 choice [ 0.776914] hub 3-0:1.0: USB hub found [ 0.776921] hub 3-0:1.0: 2 ports detected [ 0.776967] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 0.776974] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.776978] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.777015] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.777035] uhci_hcd 0000:00:1d.2: irq 10, io base 0x0000e360 [ 0.777126] usb usb4: configuration #1 chosen from 1 choice [ 0.777157] hub 4-0:1.0: USB hub found [ 0.777165] hub 4-0:1.0: 2 ports detected [ 0.777273] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.780351] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.781458] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.781465] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.781469] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.781472] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.781476] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.781550] mice: PS/2 mouse device common for all mice [ 0.781715] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.781731] rtc0: alarms up to one month, 242 bytes nvram [ 0.781850] device-mapper: uevent: version 1.0.3 [ 0.781949] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.782033] device-mapper: multipath: version 1.1.0 loaded [ 0.782037] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.782167] EISA: Probing bus 0 at eisa.0 [ 0.782174] Cannot allocate resource for EISA slot 1 [ 0.782201] EISA: Detected 0 cards. [ 0.782297] cpuidle: using governor ladder [ 0.782370] cpuidle: using governor menu [ 0.782919] TCP cubic registered [ 0.783108] NET: Registered protocol family 10 [ 0.783602] lo: Disabled Privacy Extensions [ 0.783954] NET: Registered protocol family 17 [ 0.783973] Bluetooth: L2CAP ver 2.13 [ 0.783975] Bluetooth: L2CAP socket layer initialized [ 0.783978] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.783980] Bluetooth: SCO socket layer initialized [ 0.784036] Bluetooth: RFCOMM TTY layer initialized [ 0.784040] Bluetooth: RFCOMM socket layer initialized [ 0.784042] Bluetooth: RFCOMM ver 1.11 [ 0.784287] Using IPI No-Shortcut mode [ 0.784354] PM: Resume from disk failed. [ 0.784370] registered taskstats version 1 [ 0.784491] Magic number: 5:914:490 [ 0.784529] acpi PNP0F13:00: hash matches [ 0.784568] rtc_cmos 00:03: setting system clock to 2009-12-02 17:29:11 UTC (1259774951) [ 0.784572] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.784574] EDD information not available. [ 0.807043] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.920548] ata2.00: ATAPI: TSSTcorpCDW/DVD TS-L462A, TS30, max UDMA/33 [ 0.920993] ata1.00: ATA-6: IC25N060ATMR04-0, MO3OAD4A, max UDMA/100 [ 0.920997] ata1.00: 117210240 sectors, multi 16: LBA48 [ 0.936459] ata1.00: configured for UDMA/100 [ 0.936610] scsi 0:0:0:0: Direct-Access ATA IC25N060ATMR04-0 MO3O PQ: 0 ANSI: 5 [ 0.936744] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.936791] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 0.936848] sd 0:0:0:0: [sda] Write Protect is off [ 0.936852] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.936881] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.937027] sda: [ 0.952215] ata2.00: configured for UDMA/33 [ 0.962458] sda1 sda2 < [ 0.969043] scsi 1:0:0:0: CD-ROM TSSTcorp CDW/DVD TS-L462A TS30 PQ: 0 ANSI: 5 [ 0.988025] sda5 > [ 0.988313] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.014076] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 1.014081] Uniform CD-ROM driver Revision: 3.20 [ 1.014166] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.014212] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.014236] Freeing unused kernel memory: 540k freed [ 1.014613] Write protecting the kernel text: 4568k [ 1.014658] Write protecting the kernel read-only data: 1836k [ 1.183801] Linux agpgart interface v0.103 [ 1.188398] agpgart-intel 0000:00:00.0: Intel 855GM Chipset [ 1.189268] agpgart-intel 0000:00:00.0: detected 32636K stolen memory [ 1.297604] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xa0000000 [ 1.362834] ohci1394 0000:01:02.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 1.367751] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 1.393213] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/input/input5 [ 1.393271] ACPI: Video Device [GRFX] (multi-head: yes rom: yes post: no) [ 1.419511] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[e0001000-e00017ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 1.419634] 8139cp 0000:01:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 1.423794] [drm] Initialized drm 1.1.0 20060810 [ 1.441473] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 [ 1.441481] i915 0000:00:02.0: setting latency timer to 64 [ 1.450493] 8139too Fast Ethernet driver 0.9.28 [ 1.450547] 8139too 0000:01:00.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 1.451537] eth0: RealTek RTL8139 at 0xc000, 00:90:f5:31:e6:83, IRQ 10 [ 1.457270] i2c-adapter i2c-1: unable to read EDID block. [ 1.457275] i915 0000:00:02.0: LVDS-1: no EDID data [ 1.702832] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 1.771022] [drm] DAC-6: set mode 640x480 0 [ 2.246358] i2c-adapter i2c-1: unable to read EDID block. [ 2.246365] i915 0000:00:02.0: LVDS-1: no EDID data [ 2.269883] [drm] fb0: inteldrmfb frame buffer device [ 2.269895] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.356778] render error detected, EIR: 0x00000010 [ 2.356783] [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking [ 2.356799] render error detected, EIR: 0x00000010 [ 2.365735] [drm] LVDS-8: set mode 1280x800 f [ 2.365873] usb 4-1: configuration #1 chosen from 1 choice [ 2.417301] Console: switching to colour frame buffer device 160x50 [ 2.630178] PM: Starting manual resume from disk [ 2.630183] PM: Resume from partition 8:5 [ 2.630186] PM: Checking hibernation image. [ 2.630330] PM: Resume from disk failed. [ 2.681531] kjournald starting. Commit interval 5 seconds [ 2.681544] EXT3-fs: mounted filesystem with writeback data mode. [ 2.694675] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090f5010031e683] [ 3.927333] type=1505 audit(1259774954.642:2): operation="profile_load" pid=361 name=/usr/share/gdm/guest-session/Xsession [ 3.947338] type=1505 audit(1259774954.659:3): operation="profile_load" pid=362 name=/sbin/dhclient3 [ 3.948146] type=1505 audit(1259774954.663:4): operation="profile_load" pid=362 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 3.948577] type=1505 audit(1259774954.663:5): operation="profile_load" pid=362 name=/usr/lib/connman/scripts/dhclient-script [ 4.021087] type=1505 audit(1259774954.735:6): operation="profile_load" pid=363 name=/usr/bin/evince [ 4.034139] type=1505 audit(1259774954.747:7): operation="profile_load" pid=363 name=/usr/bin/evince-previewer [ 4.041849] type=1505 audit(1259774954.755:8): operation="profile_load" pid=363 name=/usr/bin/evince-thumbnailer [ 4.079260] type=1505 audit(1259774954.791:9): operation="profile_load" pid=365 name=/usr/lib/cups/backend/cups-pdf [ 4.080219] type=1505 audit(1259774954.795:10): operation="profile_load" pid=365 name=/usr/sbin/cupsd [ 30.452267] udev: starting version 147 [ 30.489644] Adding 2441840k swap on /dev/sda5. Priority:-1 extents:1 across:2441840k [ 30.499762] intel_rng: Firmware space is locked read-only. If you can't or [ 30.499765] intel_rng: don't want to disable this in firmware setup, and if [ 30.499766] intel_rng: you are certain that your system has a functional [ 30.499768] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 30.515458] lp: driver loaded but no devices found [ 30.521921] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 30.662261] EXT3 FS on sda1, internal journal [ 30.876941] yenta_cardbus 0000:01:09.0: CardBus bridge found [1558:0350] [ 30.876959] yenta_cardbus 0000:01:09.0: adjusting diagnostic: 40 -> 60 [ 30.876966] yenta_cardbus 0000:01:09.0: Using CSCINT to route CSC interrupts to PCI [ 30.876969] yenta_cardbus 0000:01:09.0: Routing CardBus interrupts to PCI [ 30.876974] yenta_cardbus 0000:01:09.0: TI: mfunc 0x01001c00, devctl 0x66 [ 30.878674] lib80211: common routines for IEEE802.11 drivers [ 30.878677] lib80211_crypt: registered algorithm 'NULL' [ 30.884146] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 30.884149] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 30.891431] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 30.891434] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 30.899764] Bluetooth: Generic Bluetooth USB driver ver 0.5 [ 30.899893] usbcore: registered new interface driver btusb [ 30.992803] ip_tables: (C) 2000-2006 Netfilter Core Team [ 31.066381] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 31.066418] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 31.120555] yenta_cardbus 0000:01:09.0: ISA IRQ mask 0x00f8, PCI irq 10 [ 31.120560] yenta_cardbus 0000:01:09.0: Socket status: 30000006 [ 31.120566] pci_bus 0000:01: Raising subordinate bus# of parent bus (#01) from #01 to #05 [ 31.120576] yenta_cardbus 0000:01:09.0: pcmcia: parent PCI bridge I/O window: 0xc000 - 0xdfff [ 31.120581] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc000-0xdfff: clean. [ 31.121042] yenta_cardbus 0000:01:09.0: pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xefffffff [ 31.121046] yenta_cardbus 0000:01:09.0: pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x9fffffff [ 31.122540] ipw2200 0000:01:03.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 [ 31.122615] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 31.122664] ipw2200 0000:01:03.0: firmware: requesting ipw2200-bss.fw [ 31.477007] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels) [ 31.478182] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 31.479760] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 31.480482] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 31.481073] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 31.481821] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 31.634846] eth0: link down [ 31.635108] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 31.787701] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x926eb1, caps: 0xa0471b/0x0 [ 31.829422] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 [ 31.889447] __ratelimit: 3 callbacks suppressed [ 31.889451] type=1505 audit(1259774982.603:12): operation="profile_replace" pid=886 name=/usr/share/gdm/guest-session/Xsession [ 31.891180] type=1505 audit(1259774982.603:13): operation="profile_replace" pid=887 name=/sbin/dhclient3 [ 31.891972] type=1505 audit(1259774982.603:14): operation="profile_replace" pid=887 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 31.892558] type=1505 audit(1259774982.607:15): operation="profile_replace" pid=887 name=/usr/lib/connman/scripts/dhclient-script [ 31.898358] type=1505 audit(1259774982.611:16): operation="profile_replace" pid=888 name=/usr/bin/evince [ 31.914555] type=1505 audit(1259774982.627:17): operation="profile_replace" pid=888 name=/usr/bin/evince-previewer [ 31.922198] type=1505 audit(1259774982.635:18): operation="profile_replace" pid=888 name=/usr/bin/evince-thumbnailer [ 31.924058] intel8x0_measure_ac97_clock: measured 55034 usecs (2651 samples) [ 31.924061] intel8x0: clocking to 48000 [ 31.980432] type=1505 audit(1259774982.695:19): operation="profile_replace" pid=911 name=/usr/lib/cups/backend/cups-pdf [ 31.981368] type=1505 audit(1259774982.695:20): operation="profile_replace" pid=911 name=/usr/sbin/cupsd [ 31.983853] type=1505 audit(1259774982.695:21): operation="profile_replace" pid=912 name=/usr/sbin/tcpdump [ 32.595089] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 32.595094] Bluetooth: BNEP filters: protocol multicast [ 32.624197] Bridge firewalling registered [ 32.800613] [drm] DAC-6: set mode 640x480 0 [ 32.803657] ppdev: user-space parallel port driver [ 33.301833] [drm] DAC-6: set mode 640x480 0 [ 33.737041] i2c-adapter i2c-1: unable to read EDID block. [ 33.737048] i915 0000:00:02.0: LVDS-1: no EDID data [ 33.859636] [drm] DAC-6: set mode 640x480 0 [ 34.388033] [drm] DAC-6: set mode 640x480 0 [ 34.901280] i2c-adapter i2c-1: unable to read EDID block. [ 34.901287] i915 0000:00:02.0: LVDS-1: no EDID data [ 38.089617] [drm] DAC-6: set mode 640x480 0 [ 38.586931] [drm] DAC-6: set mode 640x480 0 [ 39.017222] i2c-adapter i2c-1: unable to read EDID block. [ 39.017227] i915 0000:00:02.0: LVDS-1: no EDID data [ 39.132022] [drm] DAC-6: set mode 640x480 0 [ 39.632500] [drm] DAC-6: set mode 640x480 0 [ 40.061643] i2c-adapter i2c-1: unable to read EDID block. [ 40.061648] i915 0000:00:02.0: LVDS-1: no EDID data [ 40.176242] [drm] DAC-6: set mode 640x480 0 [ 40.675461] [drm] DAC-6: set mode 640x480 0 [ 41.106341] i2c-adapter i2c-1: unable to read EDID block. [ 41.106346] i915 0000:00:02.0: LVDS-1: no EDID data [ 42.296584] [drm] DAC-6: set mode 640x480 0 [ 42.512019] eth1: no IPv6 routers present [ 42.792407] [drm] DAC-6: set mode 640x480 0 [ 43.220141] i2c-adapter i2c-1: unable to read EDID block. [ 43.220146] i915 0000:00:02.0: LVDS-1: no EDID data [ 60.175690] lib80211_crypt: registered algorithm 'WEP' [ 96.104042] Clocksource tsc unstable (delta = -72800949 ns) [ 1047.652550] [drm] DAC-6: set mode 640x480 0 [ 1048.157041] [drm] DAC-6: set mode 640x480 0 [ 1048.624053] i2c-adapter i2c-1: unable to read EDID block. [ 1048.624066] i915 0000:00:02.0: LVDS-1: no EDID data [ 1192.216351] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 6300.959660] SCTP: Hash tables configured (established 65536 bind 65536)