[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #39-Ubuntu SMP Wed Jul 28 06:07:29 UTC 2010 (Ubuntu 2.6.32-24.39-generic 2.6.32.15+drm33.5) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.2 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 0E8000000 mask FFC000000 write-combining [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] modified: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 2f371000 - 30033afd [ 0.000000] ACPI: RSDP 000f6d40 00014 (v00 KM266 ) [ 0.000000] ACPI: RSDT 3fff3000 0002C (v01 KM266 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 3fff3040 00074 (v01 KM266 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 3fff30c0 0482C (v01 KM266 AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 3fff0000 00040 [ 0.000000] ACPI: APIC 3fff7900 0005A (v01 KM266 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008dbeb8] TEXT DATA BSS ==> [0000100000 - 00008dbeb8] [ 0.000000] #4 [002f371000 - 0030033afd] RAMDISK ==> [002f371000 - 0030033afd] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [00008dc000 - 00008df08a] BRK ==> [00008dc000 - 00008df08a] [ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00f5360] f5360 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003fff0 [ 0.000000] On node 0 totalpages: 262015 [ 0.000000] free_area_init_node: node 0, pgdat c0798780, node_mem_map c1001200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 272 pages used for memmap [ 0.000000] HighMem zone: 34530 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s36056 r0 d21288 u4194304 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259967 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=2be1eddc-5c30-4af1-b576-5fb6d003cb96 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5242240 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003fff0) [ 0.000000] Memory: 1012176k/1048512k available (4679k kernel code, 35340k reserved, 2116k data, 660k init, 139208k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0848000 ( 660 kB) [ 0.000000] .data : 0xc0591d43 - 0xc07a2e88 (2116 kB) [ 0.000000] .text : 0xc0100000 - 0xc0591d43 (4679 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1792.565 MHz processor. [ 0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3585.13 BogoMIPS (lpj=7170260) [ 0.004044] Security Framework initialized [ 0.004093] AppArmor: AppArmor initialized [ 0.004106] Mount-cache hash table entries: 512 [ 0.008074] Initializing cgroup subsys ns [ 0.008085] Initializing cgroup subsys cpuacct [ 0.008091] Initializing cgroup subsys memory [ 0.008107] Initializing cgroup subsys devices [ 0.008111] Initializing cgroup subsys freezer [ 0.008114] Initializing cgroup subsys net_cls [ 0.008147] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.008151] CPU: L2 Cache: 64K (64 bytes/line) [ 0.008158] mce: CPU supports 4 MCE banks [ 0.008191] Performance Events: AMD PMU driver. [ 0.008201] ... version: 0 [ 0.008204] ... bit width: 48 [ 0.008206] ... generic registers: 4 [ 0.008209] ... value mask: 0000ffffffffffff [ 0.008212] ... max period: 00007fffffffffff [ 0.008214] ... fixed-purpose events: 0 [ 0.008217] ... event mask: 000000000000000f [ 0.008223] Checking 'hlt' instruction... OK. [ 0.024755] SMP alternatives: switching to UP code [ 0.032789] Freeing SMP alternatives: 19k freed [ 0.032840] ACPI: Core revision 20090903 [ 0.044064] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.044080] ftrace: allocating 21780 entries in 43 pages [ 0.048181] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.049268] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.090626] CPU0: AMD 06/08 stepping 01 [ 0.092001] Brought up 1 CPUs [ 0.092001] Total of 1 processors activated (3585.13 BogoMIPS). [ 0.092001] CPU0 attaching NULL sched-domain. [ 0.092001] devtmpfs: initialized [ 0.092001] regulator: core version 0.5 [ 0.092001] Time: 7:57:00 Date: 06/05/11 [ 0.092001] NET: Registered protocol family 16 [ 0.092001] EISA bus registered [ 0.092001] ACPI: bus type pci registered [ 0.095326] PCI: PCI BIOS revision 2.10 entry at 0xfb600, last bus=1 [ 0.095330] PCI: Using configuration type 1 for base access [ 0.096756] bio: create slab at 0 [ 0.097580] ACPI: EC: Look up EC in DSDT [ 0.104499] ACPI: Interpreter enabled [ 0.104517] ACPI: (supports S0 S1 S4 S5) [ 0.104555] ACPI: Using IOAPIC for interrupt routing [ 0.110546] ACPI: No dock devices found. [ 0.110718] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.110800] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe8000000-0xebffffff] [ 0.110895] pci 0000:00:01.0: supports D1 [ 0.110956] pci 0000:00:10.0: reg 20 io port: [0xd000-0xd01f] [ 0.110981] pci 0000:00:10.0: supports D1 D2 [ 0.110985] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.110990] pci 0000:00:10.0: PME# disabled [ 0.111037] pci 0000:00:10.1: reg 20 io port: [0xd400-0xd41f] [ 0.111062] pci 0000:00:10.1: supports D1 D2 [ 0.111064] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.111069] pci 0000:00:10.1: PME# disabled [ 0.111116] pci 0000:00:10.2: reg 20 io port: [0xd800-0xd81f] [ 0.111140] pci 0000:00:10.2: supports D1 D2 [ 0.111143] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.111148] pci 0000:00:10.2: PME# disabled [ 0.111180] pci 0000:00:10.3: reg 10 32bit mmio: [0xee000000-0xee0000ff] [ 0.111220] pci 0000:00:10.3: supports D1 D2 [ 0.111223] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.111227] pci 0000:00:10.3: PME# disabled [ 0.111298] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.111308] pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM [ 0.111312] pci 0000:00:11.0: quirk: region 5000-500f claimed by vt8235 SMB [ 0.111375] pci 0000:00:11.1: reg 20 io port: [0xdc00-0xdc0f] [ 0.111437] pci 0000:00:11.5: reg 10 io port: [0xe000-0xe0ff] [ 0.111479] pci 0000:00:11.5: supports D1 D2 [ 0.111513] pci 0000:00:12.0: reg 10 io port: [0xe800-0xe8ff] [ 0.111521] pci 0000:00:12.0: reg 14 32bit mmio: [0xee001000-0xee0010ff] [ 0.111558] pci 0000:00:12.0: supports D1 D2 [ 0.111561] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.111566] pci 0000:00:12.0: PME# disabled [ 0.111620] pci 0000:01:00.0: reg 10 32bit mmio: [0xec000000-0xecffffff] [ 0.111627] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xe0000000-0xe7ffffff] [ 0.111646] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.111699] pci 0000:00:01.0: bridge 32bit mmio: [0xec000000-0xedffffff] [ 0.111705] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xe7ffffff] [ 0.111713] pci_bus 0000:00: on NUMA node 0 [ 0.111722] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.135404] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12) [ 0.135631] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 6 7 10 11 12) [ 0.135852] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12) [ 0.136097] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *5 [ 0.136285] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.136461] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.136636] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.136811] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.137048] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0 [ 0.137290] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0 [ 0.137557] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0 [ 0.137795] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0 [ 0.138015] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.138020] vgaarb: loaded [ 0.138236] SCSI subsystem initialized [ 0.138398] libata version 3.00 loaded. [ 0.138550] usbcore: registered new interface driver usbfs [ 0.138569] usbcore: registered new interface driver hub [ 0.138619] usbcore: registered new device driver usb [ 0.138891] ACPI: WMI: Mapper loaded [ 0.138896] PCI: Using ACPI for IRQ routing [ 0.139135] NetLabel: Initializing [ 0.139139] NetLabel: domain hash size = 128 [ 0.139141] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.139163] NetLabel: unlabeled traffic allowed by default [ 0.139251] Switching to clocksource tsc [ 0.140000] AppArmor: AppArmor Filesystem Enabled [ 0.140000] pnp: PnP ACPI init [ 0.140000] ACPI: bus type pnp registered [ 0.143561] pnp: PnP ACPI: found 11 devices [ 0.143567] ACPI: ACPI bus type pnp unregistered [ 0.143575] PnPBIOS: Disabled by ACPI PNP [ 0.143601] system 00:00: iomem range 0xcc000-0xcffff has been reserved [ 0.143606] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved [ 0.143610] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved [ 0.143614] system 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 0.143618] system 00:00: iomem range 0x3fff0000-0x3fffffff could not be reserved [ 0.143623] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved [ 0.143627] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.143631] system 00:00: iomem range 0x100000-0x3ffeffff could not be reserved [ 0.143636] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.143640] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.143644] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved [ 0.143656] system 00:02: ioport range 0x4000-0x407f has been reserved [ 0.143660] system 00:02: ioport range 0x5000-0x500f has been reserved [ 0.143669] system 00:03: ioport range 0x4d0-0x4d1 has been reserved [ 0.143673] system 00:03: ioport range 0x800-0x805 has been reserved [ 0.143677] system 00:03: ioport range 0x290-0x297 has been reserved [ 0.178532] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.178537] pci 0000:00:01.0: IO window: disabled [ 0.178545] pci 0000:00:01.0: MEM window: 0xec000000-0xedffffff [ 0.178550] pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xe7ffffff [ 0.178570] pci 0000:00:01.0: setting latency timer to 64 [ 0.178578] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.178581] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.178586] pci_bus 0000:01: resource 1 mem: [0xec000000-0xedffffff] [ 0.178589] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xe7ffffff] [ 0.178652] NET: Registered protocol family 2 [ 0.178793] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.179442] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.181910] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.183115] TCP: Hash tables configured (established 131072 bind 65536) [ 0.183120] TCP reno registered [ 0.183298] NET: Registered protocol family 1 [ 0.183326] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.183421] pci 0000:01:00.0: Boot video device [ 0.183754] cpufreq-nforce2: No nForce2 chipset. [ 0.183799] Scanning for low memory corruption every 60 seconds [ 0.183998] audit: initializing netlink socket (disabled) [ 0.184021] type=2000 audit(1307260620.180:1): initialized [ 0.195081] Trying to unpack rootfs image as initramfs... [ 0.208944] highmem bounce pool size: 64 pages [ 0.208955] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.211338] VFS: Disk quotas dquot_6.5.2 [ 0.211456] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.216889] fuse init (API version 7.13) [ 0.217107] msgmni has been set to 1706 [ 0.217584] alg: No test for stdrng (krng) [ 0.217701] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.217707] io scheduler noop registered [ 0.217710] io scheduler anticipatory registered [ 0.217712] io scheduler deadline registered [ 0.217779] io scheduler cfq registered (default) [ 0.217945] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.217979] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.218152] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.218159] ACPI: Power Button [PWRB] [ 0.218246] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.218250] ACPI: Power Button [PWRF] [ 0.218316] fan PNP0C0B:00: registered as cooling_device0 [ 0.218324] ACPI: Fan [FAN] (on) [ 0.218710] Marking TSC unstable due to TSC halts in idle [ 0.218899] processor LNXCPU:00: registered as cooling_device1 [ 0.226963] Switching to clocksource acpi_pm [ 0.420407] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.420429] ACPI: Thermal Zone [THRM] (40 C) [ 0.422872] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.423002] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.423467] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.428333] isapnp: Scanning for PnP cards... [ 0.434993] brd: module loaded [ 0.435763] loop: module loaded [ 0.435968] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.436740] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20 [ 0.436747] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 [ 0.436756] alloc irq_desc for 20 on node -1 [ 0.436759] alloc kstat_irqs on node -1 [ 0.436772] pata_acpi 0000:00:11.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 0.436878] pata_acpi 0000:00:11.1: PCI INT A disabled [ 0.437356] Fixed MDIO Bus: probed [ 0.437405] PPP generic driver version 2.4.2 [ 0.437542] tun: Universal TUN/TAP device driver, 1.6 [ 0.437545] tun: (C) 1999-2004 Max Krasnyansky [ 0.437700] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.438167] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21 [ 0.438172] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 [ 0.438181] alloc irq_desc for 21 on node -1 [ 0.438184] alloc kstat_irqs on node -1 [ 0.438198] ehci_hcd 0000:00:10.3: PCI INT D -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.438231] ehci_hcd 0000:00:10.3: EHCI Host Controller [ 0.438351] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1 [ 0.438453] ehci_hcd 0000:00:10.3: irq 21, io mem 0xee000000 [ 0.487946] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00 [ 0.488224] usb usb1: configuration #1 chosen from 1 choice [ 0.488274] hub 1-0:1.0: USB hub found [ 0.488297] hub 1-0:1.0: 6 ports detected [ 0.488397] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.488423] uhci_hcd: USB Universal Host Controller Interface driver [ 0.488522] uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.488537] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 0.488656] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 0.488692] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d000 [ 0.488871] usb usb2: configuration #1 chosen from 1 choice [ 0.488916] hub 2-0:1.0: USB hub found [ 0.488936] hub 2-0:1.0: 2 ports detected [ 0.489030] uhci_hcd 0000:00:10.1: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.489043] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 0.489129] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 0.489162] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d400 [ 0.489334] usb usb3: configuration #1 chosen from 1 choice [ 0.489385] hub 3-0:1.0: USB hub found [ 0.489403] hub 3-0:1.0: 2 ports detected [ 0.489500] uhci_hcd 0000:00:10.2: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.489514] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 0.489605] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 0.489639] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d800 [ 0.489829] usb usb4: configuration #1 chosen from 1 choice [ 0.489882] hub 4-0:1.0: USB hub found [ 0.489900] hub 4-0:1.0: 2 ports detected [ 0.490055] PNP: No PS/2 controller found. Probing ports directly. [ 0.496530] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.496556] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.496869] mice: PS/2 mouse device common for all mice [ 0.497082] rtc_cmos 00:05: RTC can wake from S4 [ 0.497175] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.497238] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.497396] device-mapper: uevent: version 1.0.3 [ 0.497690] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.497841] device-mapper: multipath: version 1.1.0 loaded [ 0.497847] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.498104] EISA: Probing bus 0 at eisa.0 [ 0.498126] Cannot allocate resource for EISA slot 4 [ 0.498129] Cannot allocate resource for EISA slot 5 [ 0.498142] EISA: Detected 0 cards. [ 0.500647] cpuidle: using governor ladder [ 0.500711] cpuidle: using governor menu [ 0.501347] TCP cubic registered [ 0.501575] NET: Registered protocol family 10 [ 0.502182] lo: Disabled Privacy Extensions [ 0.502581] NET: Registered protocol family 17 [ 0.502660] powernow-k8: Processor cpuid 681 not supported [ 0.502706] Using IPI No-Shortcut mode [ 0.502876] PM: Resume from disk failed. [ 0.502901] registered taskstats version 1 [ 0.503158] Magic number: 15:556:975 [ 0.503338] rtc_cmos 00:05: setting system clock to 2011-06-05 07:57:01 UTC (1307260621) [ 0.503344] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.503347] EDD information not available. [ 1.026950] Freeing initrd memory: 13066k freed [ 1.097489] isapnp: No Plug & Play device found [ 1.097552] Freeing unused kernel memory: 660k freed [ 1.099005] Write protecting the kernel text: 4680k [ 1.099045] Write protecting the kernel read-only data: 1840k [ 1.150780] udev: starting version 151 [ 1.152130] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 1.451112] Floppy drive(s): fd0 is 1.44M [ 1.475039] FDC 0 is a post-1991 82077 [ 1.480834] usb 2-1: configuration #1 chosen from 1 choice [ 1.538604] pata_via 0000:00:11.1: version 0.3.4 [ 1.538640] pata_via 0000:00:11.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 1.539031] Linux agpgart interface v0.103 [ 1.544826] scsi0 : pata_via [ 1.553879] scsi1 : pata_via [ 1.557429] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xdc00 irq 14 [ 1.557437] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xdc08 irq 15 [ 1.567525] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 1.567537] via-rhine: Broken BIOS detected, avoid_D3 enabled. [ 1.568091] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23 [ 1.568096] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23 [ 1.568106] alloc irq_desc for 23 on node -1 [ 1.568109] alloc kstat_irqs on node -1 [ 1.568122] via-rhine 0000:00:12.0: PCI INT A -> Link[ALKD] -> GSI 23 (level, low) -> IRQ 23 [ 1.593691] eth0: VIA Rhine II at 0xee001000, 00:11:5b:07:7a:ae, IRQ 23. [ 1.594410] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link c5e1. [ 1.684055] agpgart: Detected VIA KM400/KM400A chipset [ 1.691319] usbcore: registered new interface driver hiddev [ 1.703702] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe8000000 [ 1.705297] [drm] Initialized drm 1.1.0 20060810 [ 1.736078] usb 2-2: new low speed USB device using uhci_hcd and address 3 [ 1.753142] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input3 [ 1.753330] generic-usb 0003:046D:C30E.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:10.0-1/input0 [ 1.776583] ata1.00: ATA-6: ST380011A, 3.04, max UDMA/100 [ 1.776589] ata1.00: 156301488 sectors, multi 16: LBA48 [ 1.792455] ata1.00: configured for UDMA/100 [ 1.792712] scsi 0:0:0:0: Direct-Access ATA ST380011A 3.04 PQ: 0 ANSI: 5 [ 1.793053] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.793814] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.793896] sd 0:0:0:0: [sda] Write Protect is off [ 1.793901] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.793941] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.794284] sda: sda1 sda2 [ 1.804283] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.881939] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.1/input/input4 [ 1.882461] generic-usb 0003:046D:C30E.0002: input,hidraw1: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:10.0-1/input1 [ 1.882536] usbcore: registered new interface driver usbhid [ 1.882840] usbhid: v2.6:USB HID core driver [ 1.908724] usb 2-2: configuration #1 chosen from 1 choice [ 1.926783] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input5 [ 1.928214] generic-usb 0003:046D:C046.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:10.0-2/input0 [ 1.948568] ata2.00: ATAPI: JLMS XJ-HD165H, CH12, max UDMA/33 [ 1.949045] ata2.00: configured for UDMA/33 [ 1.949627] scsi 1:0:0:0: CD-ROM JLMS XJ-HD165H CH12 PQ: 0 ANSI: 5 [ 1.951970] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 1.951980] Uniform CD-ROM driver Revision: 3.20 [ 1.952772] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.953250] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.062046] alloc irq_desc for 16 on node -1 [ 2.062052] alloc kstat_irqs on node -1 [ 2.062066] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.069391] [drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x011000a1) [ 2.069540] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM [ 2.206181] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 2.206482] [drm] nouveau 0000:01:00.0: BMP BIOS found [ 2.206486] [drm] nouveau 0000:01:00.0: BMP version 5.16 [ 2.206491] [drm] nouveau 0000:01:00.0: Bios version 03.11.00.08 [ 2.206496] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 1.1 [ 2.206499] [drm] nouveau 0000:01:00.0: No useful information in BIOS output table; adding all possible outputs [ 2.206504] [drm] nouveau 0000:01:00.0: Probing TV encoders on I2C bus: 1 [ 2.211245] [drm] nouveau 0000:01:00.0: No TV encoders found. [ 2.211519] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x0780 [ 2.211537] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x0E0A [ 2.211545] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x079B [ 2.211565] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x0DB1 [ 2.211575] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x0821 [ 2.211580] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0x091E [ 2.211601] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0x084F [ 2.211617] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 7 at offset 0x08B9 [ 2.223945] [TTM] Zone kernel: Available graphics memory: 443630 kiB. [ 2.223950] [TTM] Zone highmem: Available graphics memory: 513234 kiB. [ 2.223973] [drm] nouveau 0000:01:00.0: 32 MiB VRAM [ 2.224094] agpgart-via 0000:00:00.0: AGP 3.5 bridge [ 2.224117] agpgart-via 0000:00:00.0: bridge is in legacy mode, falling back to 2.x [ 2.224126] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode [ 2.224174] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode [ 2.224179] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture) [ 2.224489] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0 [ 2.225708] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0 [ 2.225732] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0 [ 2.225743] [drm] nouveau 0000:01:00.0: Saving VGA fonts [ 2.263660] [drm] nouveau 0000:01:00.0: Detected a VGA connector [ 2.264898] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 2.403902] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo f68cda00 [ 2.404337] fb0: nouveaufb frame buffer device [ 2.404343] registered panic notifier [ 2.404357] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 [ 2.415291] vga16fb: initializing [ 2.415309] vga16fb: mapped to 0xc00a0000 [ 2.415319] vga16fb: not registering due to another framebuffer present [ 2.498289] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [ 2.498298] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output @ [ 2.500032] Console: switching to colour frame buffer device 160x64 [ 2.896200] xor: automatically using best checksumming function: pIII_sse [ 2.916009] pIII_sse : 1533.000 MB/sec [ 2.916013] xor: using function: pIII_sse (1533.000 MB/sec) [ 2.923244] device-mapper: dm-raid45: initialized v0.2594b [ 3.077334] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 5.285745] udev: starting version 151 [ 5.985095] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 6.107376] lp: driver loaded but no devices found [ 6.508609] irda_init() [ 6.508655] NET: Registered protocol family 23 [ 6.543574] parport_pc 00:0a: reported by Plug and Play ACPI [ 6.543665] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 6.620349] ppdev: user-space parallel port driver [ 6.640731] lp0: using parport0 (interrupt-driven). [ 6.739846] type=1505 audit(1307260627.732:2): operation="profile_load" pid=496 name="/sbin/dhclient3" [ 6.740706] type=1505 audit(1307260627.736:3): operation="profile_load" pid=496 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 6.740927] type=1505 audit(1307260627.736:4): operation="profile_load" pid=496 name="/usr/lib/connman/scripts/dhclient-script" [ 8.181850] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 [ 8.181858] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [ 8.181868] alloc irq_desc for 22 on node -1 [ 8.181872] alloc kstat_irqs on node -1 [ 8.181885] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22 [ 8.182066] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 8.883804] kjournald starting. Commit interval 5 seconds [ 8.884243] EXT3 FS on sda2, internal journal [ 8.884256] EXT3-fs: mounted filesystem with ordered data mode. [ 11.110314] type=1505 audit(1307260632.104:5): operation="profile_load" pid=844 name="/usr/share/gdm/guest-session/Xsession" [ 11.115010] type=1505 audit(1307260632.108:6): operation="profile_replace" pid=849 name="/sbin/dhclient3" [ 11.115461] type=1505 audit(1307260632.108:7): operation="profile_replace" pid=849 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 11.115718] type=1505 audit(1307260632.108:8): operation="profile_replace" pid=849 name="/usr/lib/connman/scripts/dhclient-script" [ 11.144161] type=1505 audit(1307260632.140:9): operation="profile_load" pid=850 name="/usr/bin/evince" [ 11.152315] type=1505 audit(1307260632.148:10): operation="profile_load" pid=850 name="/usr/bin/evince-previewer" [ 11.156433] type=1505 audit(1307260632.152:11): operation="profile_load" pid=850 name="/usr/bin/evince-thumbnailer" [ 12.366540] eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ 16.281120] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 16.283031] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 22.592055] eth0: no IPv6 routers present [ 63.816050] ata1: lost interrupt (Status 0x50) [ 63.816088] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 63.816098] ata1.00: failed command: READ DMA [ 63.816107] ata1.00: cmd c8/00:90:1f:3a:4a/00:00:00:00:00/e0 tag 0 dma 73728 in [ 63.816109] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [ 63.816113] ata1.00: status: { DRDY } [ 63.816145] ata1: soft resetting link [ 64.052412] ata1.00: configured for UDMA/100 [ 64.052422] ata1.00: device reported invalid CHS sector 0 [ 64.052440] ata1: EH complete [ 497.565117] nvidia: module license 'NVIDIA' taints kernel. [ 497.565127] Disabling lock debugging due to kernel taint [ 498.275439] NVRM: The NVIDIA probe routine was not called for 1 device(s). [ 498.275447] NVRM: This can occur when a driver such as rivafb, nvidiafb or [ 498.275449] NVRM: rivatv was loaded and obtained ownership of the NVIDIA [ 498.275451] NVRM: device(s). [ 498.275455] NVRM: Try unloading the rivafb, nvidiafb or rivatv kernel module [ 498.275457] NVRM: (and/or reconfigure your kernel without rivafb/nvidiafb [ 498.275458] NVRM: support), then try loading the NVIDIA kernel module again. [ 498.279109] NVRM: No NVIDIA graphics adapter probed! [ 2429.112441] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 2429.137795] SGI XFS Quota Management subsystem [ 2429.186112] JFS: nTxBlock = 8019, nTxLock = 64154 [ 2429.335417] NTFS driver 2.1.29 [Flags: R/O MODULE]. [ 2429.461719] QNX4 filesystem 0.2.3 registered. [ 2429.633329] Btrfs loaded [ 3521.120279] __ratelimit: 9 callbacks suppressed [ 3521.120286] type=1505 audit(1307264142.116:15): operation="profile_replace" pid=13801 name="/sbin/dhclient3" [ 3521.120700] type=1505 audit(1307264142.116:16): operation="profile_replace" pid=13801 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 3521.120959] type=1505 audit(1307264142.116:17): operation="profile_replace" pid=13801 name="/usr/lib/connman/scripts/dhclient-script" [ 3526.232423] type=1505 audit(1307264147.228:18): operation="profile_replace" pid=13861 name="/usr/share/gdm/guest-session/Xsession" [ 3526.542367] type=1505 audit(1307264147.536:19): operation="profile_replace" pid=13862 name="/sbin/dhclient3" [ 3526.542771] type=1505 audit(1307264147.536:20): operation="profile_replace" pid=13862 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 3526.543091] type=1505 audit(1307264147.536:21): operation="profile_replace" pid=13862 name="/usr/lib/connman/scripts/dhclient-script" [ 3540.315002] type=1505 audit(1307264161.308:22): operation="profile_replace" pid=13863 name="/usr/bin/evince" [ 3540.319769] type=1505 audit(1307264161.312:23): operation="profile_replace" pid=13863 name="/usr/bin/evince-previewer" [ 3540.323641] type=1505 audit(1307264161.316:24): operation="profile_replace" pid=13863 name="/usr/bin/evince-thumbnailer" [ 3540.991588] type=1505 audit(1307264161.984:25): operation="profile_replace" pid=13865 name="/usr/lib/cups/backend/cups-pdf" [ 3540.992768] type=1505 audit(1307264161.988:26): operation="profile_replace" pid=13865 name="/usr/sbin/cupsd" [ 3541.179545] type=1505 audit(1307264162.172:27): operation="profile_replace" pid=13866 name="/usr/sbin/tcpdump" [ 3541.423148] type=1505 audit(1307264162.416:28): operation="profile_replace" pid=13895 name="/usr/share/gdm/guest-session/Xsession" [ 3541.726628] type=1505 audit(1307264162.720:29): operation="profile_replace" pid=13896 name="/sbin/dhclient3" [ 3541.727041] type=1505 audit(1307264162.720:30): operation="profile_replace" pid=13896 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 3541.727357] type=1505 audit(1307264162.720:31): operation="profile_replace" pid=13896 name="/usr/lib/connman/scripts/dhclient-script" [ 3555.330816] type=1505 audit(1307264176.324:32): operation="profile_replace" pid=13897 name="/usr/bin/evince" [ 3555.335502] type=1505 audit(1307264176.328:33): operation="profile_replace" pid=13897 name="/usr/bin/evince-previewer" [ 3555.339286] type=1505 audit(1307264176.332:34): operation="profile_replace" pid=13897 name="/usr/bin/evince-thumbnailer" [ 3555.978192] type=1505 audit(1307264176.972:35): operation="profile_replace" pid=13899 name="/usr/lib/cups/backend/cups-pdf" [ 3555.978932] type=1505 audit(1307264176.972:36): operation="profile_replace" pid=13899 name="/usr/sbin/cupsd" [ 3556.162452] type=1505 audit(1307264177.156:37): operation="profile_replace" pid=13900 name="/usr/sbin/tcpdump" [ 3612.278951] type=1505 audit(1307264233.272:38): operation="profile_replace" pid=16312 name="/usr/bin/evince" [ 3612.283889] type=1505 audit(1307264233.276:39): operation="profile_replace" pid=16312 name="/usr/bin/evince-previewer" [ 3612.287962] type=1505 audit(1307264233.280:40): operation="profile_replace" pid=16312 name="/usr/bin/evince-thumbnailer"