[ 0.000000] microcode: CPU0 microcode updated early to revision 0x1c, date = 2015-02-26 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.0-8-generic (buildd@lgw01-33) (gcc version 5.3.1 20160222 (Ubuntu 5.3.1-9ubuntu3) ) #23-Ubuntu SMP Wed Feb 24 20:45:30 UTC 2016 (Ubuntu 4.4.0-8.23-generic 4.4.2) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.4.0-8-generic.efi.signed root=/dev/mapper/ubuntu--mate--vg-root ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009c000-0x000000000009cfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000bffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d125ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d1260000-0x00000000d1461fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d1462000-0x00000000d684ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d6850000-0x00000000d6a4ffff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000d6a50000-0x00000000dae9efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041e5fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000041e600000-0x000000041effffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by Lenovo [ 0.000000] efi: ACPI 2.0=0xdaffe014 ACPI=0xdaffe000 SMBIOS=0xdae9e000 [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: LENOVO 2306CTO/2306CTO, BIOS G2ETA1WW (2.61 ) 04/22/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x41e600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0C0000000 mask FE0000000 write-back [ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable [ 0.000000] 6 base 100000000 mask F00000000 write-back [ 0.000000] 7 base 200000000 mask E00000000 write-back [ 0.000000] 8 base 400000000 mask FE0000000 write-back [ 0.000000] 9 base 41F000000 mask FFF000000 uncachable [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576 [ 0.000000] BRK [0x031fc000, 0x031fcfff] PGTABLE [ 0.000000] BRK [0x031fd000, 0x031fdfff] PGTABLE [ 0.000000] BRK [0x031fe000, 0x031fefff] PGTABLE [ 0.000000] BRK [0x031ff000, 0x031fffff] PGTABLE [ 0.000000] BRK [0x03200000, 0x03200fff] PGTABLE [ 0.000000] BRK [0x03201000, 0x03201fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x33526000-0x35a8afff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000DAFFE014 000024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 0x00000000DAFFE170 0000CC (v01 LENOVO TP-G2 00002610 PTL 00000002) [ 0.000000] ACPI: FACP 0x00000000DAFE6000 00010C (v05 LENOVO TP-G2 00002610 PTL 00000002) [ 0.000000] ACPI: DSDT 0x00000000DAFE8000 010E27 (v01 LENOVO TP-G2 00002610 INTL 20061109) [ 0.000000] ACPI: FACS 0x00000000DAF5A000 000040 [ 0.000000] ACPI: SLIC 0x00000000DAFFD000 000176 (v01 LENOVO TP-G2 00002610 PTL 00000001) [ 0.000000] ACPI: TCPA 0x00000000DAFFC000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001) [ 0.000000] ACPI: SSDT 0x00000000DAFFB000 000408 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000DAFFA000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000DAFF9000 0007A8 (v01 LENOVO SataAhci 00001000 INTL 20061109) [ 0.000000] ACPI: HPET 0x00000000DAFE4000 000038 (v01 LENOVO TP-G2 00002610 PTL 00000002) [ 0.000000] ACPI: APIC 0x00000000DAFE3000 000098 (v01 LENOVO TP-G2 00002610 PTL 00000002) [ 0.000000] ACPI: MCFG 0x00000000DAFE2000 00003C (v01 LENOVO TP-G2 00002610 PTL 00000002) [ 0.000000] ACPI: ECDT 0x00000000DAFE1000 000052 (v01 LENOVO TP-G2 00002610 PTL 00000002) [ 0.000000] ACPI: FPDT 0x00000000DAFE0000 000064 (v01 LENOVO TP-G2 00002610 PTL 00000002) [ 0.000000] ACPI: ASF! 0x00000000DAFE7000 0000A5 (v32 LENOVO TP-G2 00002610 PTL 00000002) [ 0.000000] ACPI: UEFI 0x00000000DAFDF000 00003E (v01 LENOVO TP-G2 00002610 PTL 00000002) [ 0.000000] ACPI: UEFI 0x00000000DAFDE000 000042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: POAT 0x00000000DAFDD000 000055 (v03 LENOVO TP-G2 00002610 PTL 00000002) [ 0.000000] ACPI: SSDT 0x00000000DAFDC000 000C79 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000DAFDB000 000A83 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: DMAR 0x00000000DAFDA000 0000B8 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: UEFI 0x00000000DAFD9000 0002A6 (v01 LENOVO TP-G2 00002610 PTL 00000002) [ 0.000000] ACPI: DBG2 0x00000000DAFD8000 0000E9 (v00 LENOVO TP-G2 00002610 PTL 00000002) [ 0.000000] ACPI: BGRT 0x00000000DAFD7000 000038 (v00 LENOVO TP-G2 00002610 PTL 00000002) [ 0.000000] ACPI: DMI detected: Lenovo ThinkPad X230 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041e5fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x41e5e9000-0x41e5edfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000041e5fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff] [ 0.000000] node 0: [mem 0x000000000009d000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.000000] node 0: [mem 0x0000000020200000-0x0000000040003fff] [ 0.000000] node 0: [mem 0x0000000040005000-0x00000000d125ffff] [ 0.000000] node 0: [mem 0x00000000d1462000-0x00000000d684ffff] [ 0.000000] node 0: [mem 0x00000000dafff000-0x00000000daffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000041e5fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041e5fffff] [ 0.000000] On node 0 totalpages: 4147690 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 24 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13650 pages used for memmap [ 0.000000] DMA32 zone: 873550 pages, LIFO batch:31 [ 0.000000] Normal zone: 51096 pages used for memmap [ 0.000000] Normal zone: 3270144 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xdba00000-0xdf9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000bffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff] [ 0.000000] PM: Registered nosave memory: [mem 0xd1260000-0xd1461fff] [ 0.000000] PM: Registered nosave memory: [mem 0xd6850000-0xd6a4ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd6a50000-0xdae9efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdae9f000-0xdaf9efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf80f7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff] [ 0.000000] e820: [mem 0xdfa00000-0xf80f7fff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88041e200000 s98008 r8192 d28968 u262144 [ 0.000000] pcpu-alloc: s98008 r8192 d28968 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4082856 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.4.0-8-generic.efi.signed root=/dev/mapper/ubuntu--mate--vg-root ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16140308K/16590760K available (8290K kernel code, 1274K rwdata, 3912K rodata, 1472K init, 1292K bss, 450452K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:16640 nr_irqs:488 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2893.347 MHz processor [ 0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.69 BogoMIPS (lpj=11573388) [ 0.000031] pid_max: default: 32768 minimum: 301 [ 0.000036] ACPI: Core revision 20150930 [ 0.010041] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.033964] Security Framework initialized [ 0.033967] Yama: becoming mindful. [ 0.033979] AppArmor: AppArmor initialized [ 0.034771] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.038126] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.039620] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.039634] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.039837] Initializing cgroup subsys io [ 0.039840] Initializing cgroup subsys memory [ 0.039845] Initializing cgroup subsys devices [ 0.039847] Initializing cgroup subsys freezer [ 0.039848] Initializing cgroup subsys net_cls [ 0.039850] Initializing cgroup subsys perf_event [ 0.039852] Initializing cgroup subsys net_prio [ 0.039853] Initializing cgroup subsys hugetlb [ 0.039856] Initializing cgroup subsys pids [ 0.039875] CPU: Physical Processor ID: 0 [ 0.039875] CPU: Processor Core ID: 0 [ 0.039880] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.039880] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.040186] mce: CPU supports 7 MCE banks [ 0.040195] CPU0: Thermal monitoring enabled (TM1) [ 0.040201] process: using mwait in idle threads [ 0.040204] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.040205] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.040576] Freeing SMP alternatives memory: 28K (ffffffff820b0000 - ffffffff820b7000) [ 0.043108] Ignoring BGRT: invalid version 0 (expected 1) [ 0.044503] ftrace: allocating 31768 entries in 125 pages [ 0.057180] DMAR: Host address width 36 [ 0.057182] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.057187] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.057188] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.057191] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.057192] DMAR: RMRR base: 0x000000da2ba000 end: 0x000000da2d0fff [ 0.057193] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff [ 0.057195] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.057196] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.057197] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.057447] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.057448] x2apic enabled [ 0.057453] Switched APIC routing to cluster x2apic. [ 0.057878] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.097567] TSC deadline timer enabled [ 0.097569] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.097596] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver. [ 0.097613] ... version: 3 [ 0.097614] ... bit width: 48 [ 0.097614] ... generic registers: 4 [ 0.097615] ... value mask: 0000ffffffffffff [ 0.097616] ... max period: 0000ffffffffffff [ 0.097616] ... fixed-purpose events: 3 [ 0.097617] ... event mask: 000000070000000f [ 0.098276] x86: Booting SMP configuration: [ 0.098277] .... node #0, CPUs: #1 [ 0.101030] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.101100] #2 [ 0.101686] microcode: CPU2 microcode updated early to revision 0x1c, date = 2015-02-26 [ 0.104132] #3 [ 0.106770] x86: Booted up 1 node, 4 CPUs [ 0.106772] smpboot: Total of 4 processors activated (23146.77 BogoMIPS) [ 0.109999] devtmpfs: initialized [ 0.112749] evm: security.selinux [ 0.112750] evm: security.SMACK64 [ 0.112751] evm: security.SMACK64EXEC [ 0.112751] evm: security.SMACK64TRANSMUTE [ 0.112752] evm: security.SMACK64MMAP [ 0.112753] evm: security.ima [ 0.112753] evm: security.capability [ 0.112810] PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes) [ 0.112885] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.112952] pinctrl core: initialized pinctrl subsystem [ 0.113048] RTC time: 14:22:36, date: 03/01/16 [ 0.113136] NET: Registered protocol family 16 [ 0.122771] cpuidle: using governor ladder [ 0.138779] cpuidle: using governor menu [ 0.138786] PCCT header not found. [ 0.138882] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.138883] ACPI: bus type PCI registered [ 0.138885] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.139053] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.139055] PCI: not using MMCONFIG [ 0.139056] PCI: Using configuration type 1 for base access [ 0.139318] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.151108] ACPI: Added _OSI(Module Device) [ 0.151109] ACPI: Added _OSI(Processor Device) [ 0.151110] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.151111] ACPI: Added _OSI(Processor Aggregator Device) [ 0.151112] ACPI: Deleted _OSI(Windows 2012) [ 0.152228] ACPI : EC: EC description table is found, configuring boot EC [ 0.152238] ACPI : EC: EC started [ 0.155437] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.157422] ACPI: Dynamic OEM Table Load: [ 0.157431] ACPI: SSDT 0xFFFF88040BBDF000 000A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.157860] ACPI: Dynamic OEM Table Load: [ 0.157866] ACPI: SSDT 0xFFFF88040B544000 000303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.158246] ACPI: Dynamic OEM Table Load: [ 0.158251] ACPI: SSDT 0xFFFF88040B5C0000 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.158978] ACPI: Interpreter enabled [ 0.158983] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580) [ 0.158986] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580) [ 0.158996] ACPI: (supports S0 S3 S4 S5) [ 0.158997] ACPI: Using IOAPIC for interrupt routing [ 0.159015] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.159320] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.159326] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.161394] ACPI: Power Resource [PUBS] (on) [ 0.161903] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1) [ 0.162676] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2) [ 0.164511] acpi IBM0079:00: ACPI dock station (docks/bays count: 3) [ 0.164822] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.164870] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.164916] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.164962] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.165007] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.165052] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.165097] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.165143] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.165206] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.165210] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.165293] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability] [ 0.165330] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.165332] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability] [ 0.165334] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER] [ 0.165335] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 0.165459] PCI host bridge to bus 0000:00 [ 0.165461] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.165463] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.165464] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.165465] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.165467] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.165468] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.165469] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.165470] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.165472] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.165473] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.165474] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.165475] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.165476] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.165478] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.165479] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.165480] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff window] [ 0.165481] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window] [ 0.165483] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.165489] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 [ 0.165552] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 [ 0.165563] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.165569] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.165573] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 0.165647] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.165676] pci 0000:00:14.0: reg 0x10: [mem 0xf1520000-0xf152ffff 64bit] [ 0.165733] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.165757] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.165790] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.165821] pci 0000:00:16.0: reg 0x10: [mem 0xf1535000-0xf153500f 64bit] [ 0.165882] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.165941] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 0.165966] pci 0000:00:19.0: reg 0x10: [mem 0xf1500000-0xf151ffff] [ 0.165974] pci 0000:00:19.0: reg 0x14: [mem 0xf153b000-0xf153bfff] [ 0.165983] pci 0000:00:19.0: reg 0x18: [io 0x4080-0x409f] [ 0.166030] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.166054] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.166085] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.166112] pci 0000:00:1a.0: reg 0x10: [mem 0xf153a000-0xf153a3ff] [ 0.166182] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.166207] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.166239] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.166264] pci 0000:00:1b.0: reg 0x10: [mem 0xf1530000-0xf1533fff 64bit] [ 0.166322] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.166355] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.166386] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.166459] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.166516] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 [ 0.166587] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.166650] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.166677] pci 0000:00:1d.0: reg 0x10: [mem 0xf1539000-0xf15393ff] [ 0.166747] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.166771] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.166808] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 [ 0.166950] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 0.166973] pci 0000:00:1f.2: reg 0x10: [io 0x40a8-0x40af] [ 0.166980] pci 0000:00:1f.2: reg 0x14: [io 0x40b4-0x40b7] [ 0.166987] pci 0000:00:1f.2: reg 0x18: [io 0x40a0-0x40a7] [ 0.166995] pci 0000:00:1f.2: reg 0x1c: [io 0x40b0-0x40b3] [ 0.167003] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f] [ 0.167010] pci 0000:00:1f.2: reg 0x24: [mem 0xf1538000-0xf15387ff] [ 0.167040] pci 0000:00:1f.2: PME# supported from D3hot [ 0.167087] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.167104] pci 0000:00:1f.3: reg 0x10: [mem 0xf1534000-0xf15340ff 64bit] [ 0.167123] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.167389] pci 0000:02:00.0: [1180:e823] type 00 class 0x088001 [ 0.167438] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz. [ 0.167464] pci 0000:02:00.0: reg 0x10: [mem 0xf0d00000-0xf0d000ff] [ 0.167645] pci 0000:02:00.0: supports D1 D2 [ 0.167646] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.175075] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.175079] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.175083] pci 0000:00:1c.0: bridge window [mem 0xf0d00000-0xf14fffff] [ 0.175089] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref] [ 0.175162] pci 0000:03:00.0: [8086:4238] type 00 class 0x028000 [ 0.175249] pci 0000:03:00.0: reg 0x10: [mem 0xf0c00000-0xf0c01fff 64bit] [ 0.175451] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.182838] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.182850] pci 0000:00:1c.1: bridge window [mem 0xf0c00000-0xf0cfffff] [ 0.183621] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.183671] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.183751] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=mem,locks=none [ 0.183753] vgaarb: loaded [ 0.183754] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.183755] vgaarb: bridge control possible 0000:00:02.0 [ 0.183954] SCSI subsystem initialized [ 0.183985] libata version 3.00 loaded. [ 0.184000] ACPI: bus type USB registered [ 0.184013] usbcore: registered new interface driver usbfs [ 0.184019] usbcore: registered new interface driver hub [ 0.184034] usbcore: registered new device driver usb [ 0.184163] PCI: Using ACPI for IRQ routing [ 0.185655] PCI: pci_cache_line_size set to 64 bytes [ 0.185858] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff] [ 0.185859] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.185860] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.185861] e820: reserve RAM buffer [mem 0xd1260000-0xd3ffffff] [ 0.185862] e820: reserve RAM buffer [mem 0xd6850000-0xd7ffffff] [ 0.185863] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.185864] e820: reserve RAM buffer [mem 0x41e600000-0x41fffffff] [ 0.185952] NetLabel: Initializing [ 0.185953] NetLabel: domain hash size = 128 [ 0.185953] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.185964] NetLabel: unlabeled traffic allowed by default [ 0.186025] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.186029] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.188053] clocksource: Switched to clocksource hpet [ 0.192896] AppArmor: AppArmor Filesystem Enabled [ 0.192949] pnp: PnP ACPI init [ 0.193210] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.193212] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.193214] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved [ 0.193215] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.193219] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.193302] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff] [ 0.193320] system 00:01: [io 0x0400-0x047f] could not be reserved [ 0.193322] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.193323] system 00:01: [io 0x0800-0x080f] has been reserved [ 0.193325] system 00:01: [io 0x15e0-0x15ef] has been reserved [ 0.193326] system 00:01: [io 0x1600-0x167f] has been reserved [ 0.193328] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved [ 0.193330] system 00:01: [mem 0xfffff000-0xffffffff] has been reserved [ 0.193331] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.193332] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.193334] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.193335] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.193337] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.193339] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.193341] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.193381] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.193399] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.193416] pnp 00:04: Plug and Play ACPI device, IDs LEN0020 PNP0f13 (active) [ 0.193803] pnp: PnP ACPI: found 5 devices [ 0.199980] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.200004] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.200008] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.200012] pci 0000:00:1c.0: bridge window [mem 0xf0d00000-0xf14fffff] [ 0.200016] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref] [ 0.200023] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.200027] pci 0000:00:1c.1: bridge window [mem 0xf0c00000-0xf0cfffff] [ 0.200036] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.200038] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.200039] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.200040] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.200042] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.200043] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.200044] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.200045] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.200047] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.200048] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.200049] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.200057] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] [ 0.200058] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] [ 0.200059] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] [ 0.200060] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] [ 0.200062] pci_bus 0000:00: resource 19 [mem 0xdfa00000-0xfebfffff window] [ 0.200063] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed4bfff window] [ 0.200064] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.200065] pci_bus 0000:02: resource 1 [mem 0xf0d00000-0xf14fffff] [ 0.200067] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref] [ 0.200068] pci_bus 0000:03: resource 1 [mem 0xf0c00000-0xf0cfffff] [ 0.200093] NET: Registered protocol family 2 [ 0.200255] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.200442] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.200547] TCP: Hash tables configured (established 131072 bind 65536) [ 0.200572] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.200615] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.200679] NET: Registered protocol family 1 [ 0.200691] pci 0000:00:02.0: Video device with shadowed ROM [ 0.200838] PCI: CLS 64 bytes, default 64 [ 0.200877] Trying to unpack rootfs image as initramfs... [ 0.685303] Freeing initrd memory: 38292K (ffff880033526000 - ffff880035a8b000) [ 0.685339] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.685341] software IO TLB [mem 0xcac31000-0xcec31000] (64MB) mapped at [ffff8800cac31000-ffff8800cec30fff] [ 0.685400] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer [ 0.685401] hw unit of domain pp0-core 2^-16 Joules [ 0.685402] hw unit of domain package 2^-16 Joules [ 0.685403] hw unit of domain pp1-gpu 2^-16 Joules [ 0.685526] Scanning for low memory corruption every 60 seconds [ 0.685831] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.685863] audit: initializing netlink subsys (disabled) [ 0.685876] audit: type=2000 audit(1456842156.664:1): initialized [ 0.686164] Initialise system trusted keyring [ 0.686259] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.687392] zbud: loaded [ 0.687562] VFS: Disk quotas dquot_6.6.0 [ 0.687588] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.687970] fuse init (API version 7.23) [ 0.688094] Key type big_key registered [ 0.688459] Key type asymmetric registered [ 0.688462] Asymmetric key parser 'x509' registered [ 0.688490] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.688517] io scheduler noop registered [ 0.688519] io scheduler deadline registered (default) [ 0.688541] io scheduler cfq registered [ 0.688811] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.688817] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.688844] efifb: probing for efifb [ 0.688853] efifb: framebuffer at 0xe0000000, mapped to 0xffffc90002000000, using 4160k, total 4160k [ 0.688854] efifb: mode is 1366x768x32, linelength=5504, pages=1 [ 0.688854] efifb: scrolling: redraw [ 0.688856] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.688928] Console: switching to colour frame buffer device 170x48 [ 0.688941] fb0: EFI VGA frame buffer device [ 0.688949] intel_idle: MWAIT substates: 0x21120 [ 0.688950] intel_idle: v0.4 model 0x3A [ 0.688951] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.689202] ACPI: AC Adapter [AC] (on-line) [ 0.689251] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.689347] ACPI: Lid Switch [LID] [ 0.689378] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.689380] ACPI: Sleep Button [SLPB] [ 0.689414] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.689415] ACPI: Power Button [PWRF] [ 0.690401] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.690403] ACPI: Thermal Zone [THM0] (41 C) [ 0.690438] GHES: HEST is not enabled! [ 0.690515] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.691839] Linux agpgart interface v0.103 [ 0.694136] brd: module loaded [ 0.695189] loop: module loaded [ 0.695371] libphy: Fixed MDIO Bus: probed [ 0.695373] tun: Universal TUN/TAP device driver, 1.6 [ 0.695374] tun: (C) 1999-2004 Max Krasnyansky [ 0.695409] PPP generic driver version 2.4.2 [ 0.695455] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.695459] ehci-pci: EHCI PCI platform driver [ 0.695536] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.695540] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.695555] ehci-pci 0000:00:1a.0: debug port 2 [ 0.697442] ACPI: Battery Slot [BAT0] (battery present) [ 0.699454] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.699467] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf153a000 [ 0.708091] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.708129] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.708131] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.708133] usb usb1: Product: EHCI Host Controller [ 0.708135] usb usb1: Manufacturer: Linux 4.4.0-8-generic ehci_hcd [ 0.708137] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.708328] hub 1-0:1.0: USB hub found [ 0.708336] hub 1-0:1.0: 3 ports detected [ 0.708511] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.708517] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.708527] ehci-pci 0000:00:1d.0: debug port 2 [ 0.712422] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.712432] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf1539000 [ 0.724114] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.724172] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.724173] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.724175] usb usb2: Product: EHCI Host Controller [ 0.724176] usb usb2: Manufacturer: Linux 4.4.0-8-generic ehci_hcd [ 0.724177] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.724361] hub 2-0:1.0: USB hub found [ 0.724367] hub 2-0:1.0: 3 ports detected [ 0.724476] ehci-platform: EHCI generic platform driver [ 0.724486] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.724490] ohci-pci: OHCI PCI platform driver [ 0.724497] ohci-platform: OHCI generic platform driver [ 0.724503] uhci_hcd: USB Universal Host Controller Interface driver [ 0.724578] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.724582] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.725663] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930 [ 0.725668] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.725769] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.725770] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.725771] usb usb3: Product: xHCI Host Controller [ 0.725773] usb usb3: Manufacturer: Linux 4.4.0-8-generic xhci-hcd [ 0.725774] usb usb3: SerialNumber: 0000:00:14.0 [ 0.725954] hub 3-0:1.0: USB hub found [ 0.725964] hub 3-0:1.0: 4 ports detected [ 0.726257] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.726259] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.726284] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.726286] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.726287] usb usb4: Product: xHCI Host Controller [ 0.726288] usb usb4: Manufacturer: Linux 4.4.0-8-generic xhci-hcd [ 0.726289] usb usb4: SerialNumber: 0000:00:14.0 [ 0.726435] hub 4-0:1.0: USB hub found [ 0.726446] hub 4-0:1.0: 4 ports detected [ 0.726812] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.728453] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.728457] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.728672] mousedev: PS/2 mouse device common for all mice [ 0.728935] rtc_cmos 00:02: RTC can wake from S4 [ 0.729095] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.729124] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.729130] i2c /dev entries driver [ 0.729174] device-mapper: uevent: version 1.0.3 [ 0.729268] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 0.729282] Intel P-state driver initializing. [ 0.729456] ledtrig-cpu: registered to indicate activity on CPUs [ 0.729467] EFI Variables Facility v0.08 2004-May-17 [ 0.730325] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.741997] NET: Registered protocol family 10 [ 0.742127] NET: Registered protocol family 17 [ 0.742135] Key type dns_resolver registered [ 0.742272] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x1c [ 0.742279] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x1c [ 0.742282] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x1c [ 0.742289] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x1c [ 0.742317] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 0.742424] registered taskstats version 1 [ 0.742435] Loading compiled-in X.509 certificates [ 0.743054] Loaded X.509 cert 'Build time autogenerated kernel key: 01a2867c77e1bd6a47f73af9b7a9eaa92d6de480' [ 0.743068] zswap: loaded using pool lzo/zbud [ 0.744523] Key type trusted registered [ 0.746937] Key type encrypted registered [ 0.746942] AppArmor: AppArmor sha1 policy hashing enabled [ 0.746945] ima: No TPM chip found, activating TPM-bypass! [ 0.746964] evm: HMAC attrs: 0x1 [ 0.747233] Magic number: 8:362:383 [ 0.747240] usb usb1: hash matches [ 0.747323] rtc_cmos 00:02: setting system clock to 2016-03-01 14:22:37 UTC (1456842157) [ 0.747372] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.747373] EDD information not available. [ 0.747428] PM: Hibernation image not present or could not be loaded. [ 0.748243] Freeing unused kernel memory: 1472K (ffffffff81f40000 - ffffffff820b0000) [ 0.748244] Write protecting the kernel read-only data: 14336k [ 0.748668] Freeing unused kernel memory: 1940K (ffff88000281b000 - ffff880002a00000) [ 0.748964] Freeing unused kernel memory: 184K (ffff880002dd2000 - ffff880002e00000) [ 0.757129] random: systemd-udevd urandom read with 6 bits of entropy available [ 0.780514] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED [ 0.785301] wmi: Mapper loaded [ 0.788650] [drm] Initialized drm 1.1.0 20060810 [ 0.791915] sdhci: Secure Digital Host Controller Interface driver [ 0.791917] sdhci: Copyright(c) Pierre Ossman [ 0.794031] ahci 0000:00:1f.2: version 3.0 [ 0.794150] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.794704] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e823] (rev 4) [ 0.794813] sdhci-pci 0000:02:00.0: No vmmc regulator found [ 0.794815] sdhci-pci 0000:02:00.0: No vqmmc regulator found [ 0.796141] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA [ 0.797764] pps_core: LinuxPPS API ver. 1 registered [ 0.797766] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.799141] PTP clock support registered [ 0.803604] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.803606] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.808113] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode [ 0.808117] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 0.818771] AVX version of gcm_enc/dec engaged. [ 0.818773] AES CTR mode by8 optimization enabled [ 0.826953] scsi host0: ahci [ 0.827818] scsi host1: ahci [ 0.828048] scsi host2: ahci [ 0.828789] scsi host3: ahci [ 0.829202] scsi host4: ahci [ 0.829351] scsi host5: ahci [ 0.829409] ata1: SATA max UDMA/133 abar m2048@0xf1538000 port 0xf1538100 irq 27 [ 0.829413] ata2: SATA max UDMA/133 abar m2048@0xf1538000 port 0xf1538180 irq 27 [ 0.829414] ata3: DUMMY [ 0.829415] ata4: DUMMY [ 0.829419] ata5: SATA max UDMA/133 abar m2048@0xf1538000 port 0xf1538300 irq 27 [ 0.829420] ata6: DUMMY [ 0.829593] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.020094] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.036123] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 1.036143] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.087845] e1000e 0000:00:19.0 eth0: registered PHC clock [ 1.087847] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:c1:f2:29 [ 1.087849] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.087910] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF [ 1.088041] i915 0000:00:02.0: enabling device (0006 -> 0007) [ 1.088426] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 1.088457] [drm] Memory usable by graphics device = 2048M [ 1.088460] checking generic (e0000000 410000) vs hw (e0000000 10000000) [ 1.088461] fb: switching to inteldrmfb from EFI VGA [ 1.088485] Console: switching to colour dummy device 80x25 [ 1.088540] [drm] Replacing VGA console driver [ 1.094207] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.094209] [drm] Driver supports precise vblank timestamp query. [ 1.094280] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=mem [ 1.126040] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 1.126725] acpi device:00: registered as cooling_device4 [ 1.126774] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 1.126852] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0 [ 1.152185] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.157180] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.157183] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.157629] hub 1-1:1.0: USB hub found [ 1.157825] hub 1-1:1.0: 6 ports detected [ 1.168659] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.168661] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.168830] hub 2-1:1.0: USB hub found [ 1.168917] hub 2-1:1.0: 8 ports detected [ 1.175571] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.175578] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.176423] ata1.00: ATA-8: HGST HTS725050A7E630, GH2ZB550, max UDMA/133 [ 1.176427] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.177442] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.177447] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.178322] ata1.00: configured for UDMA/133 [ 1.178604] scsi 0:0:0:0: Direct-Access ATA HGST HTS725050A7 B550 PQ: 0 ANSI: 5 [ 1.178852] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.178855] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.178878] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.178887] sd 0:0:0:0: [sda] Write Protect is off [ 1.178889] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.178907] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.242685] sda: sda1 sda2 sda3 [ 1.243199] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.437740] usb 3-1: New USB device found, idVendor=046d, idProduct=0825 [ 1.437742] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=2 [ 1.437744] usb 3-1: SerialNumber: DD923C60 [ 1.504186] ata2: SATA link down (SStatus 0 SControl 300) [ 1.520343] fbcon: inteldrmfb (fb0) is primary device [ 1.520425] Console: switching to colour frame buffer device 170x48 [ 1.520446] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.523011] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 1.537013] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input5 [ 1.604186] usb 3-2: new full-speed USB device number 3 using xhci_hcd [ 1.684184] tsc: Refined TSC clocksource calibration: 2893.426 MHz [ 1.684192] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b500ca33a, max_idle_ns: 440795203665 ns [ 1.733948] usb 3-2: New USB device found, idVendor=1050, idProduct=0115 [ 1.733951] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.733952] usb 3-2: Product: Yubikey NEO U2F+CCID [ 1.733954] usb 3-2: Manufacturer: Yubico [ 1.736724] hidraw: raw HID events driver (C) Jiri Kosina [ 1.738255] usbcore: registered new interface driver usbhid [ 1.738256] usbhid: USB HID core driver [ 1.739449] hid-generic 0003:1050:0115.0001: hiddev0,hidraw0: USB HID v1.10 Device [Yubico Yubikey NEO U2F+CCID] on usb-0000:00:14.0-2/input0 [ 1.832204] ata5: SATA link down (SStatus 0 SControl 300) [ 2.684388] clocksource: Switched to clocksource tsc [ 53.482979] random: nonblocking pool is initialized [ 56.628377] NET: Registered protocol family 38 [ 70.025055] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 71.056602] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 71.056714] systemd[1]: Detected architecture x86-64. [ 71.071535] systemd[1]: Set hostname to . [ 71.700884] systemd[1]: Listening on Journal Audit Socket. [ 71.700952] systemd[1]: Listening on LVM2 poll daemon socket. [ 71.700969] systemd[1]: Listening on fsck to fsckd communication Socket. [ 71.700976] systemd[1]: Reached target Remote File Systems (Pre). [ 71.701000] systemd[1]: Listening on udev Control Socket. [ 71.701242] systemd[1]: Created slice User and Session Slice. [ 71.701272] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 71.701362] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 71.701555] systemd[1]: Created slice System Slice. [ 71.701590] systemd[1]: Listening on Journal Socket (/dev/log). [ 71.701782] systemd[1]: Created slice system-getty.slice. [ 71.701972] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice. [ 71.701995] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 71.702200] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 71.702221] systemd[1]: Listening on LVM2 metadata daemon socket. [ 71.702244] systemd[1]: Listening on Journal Socket. [ 71.722301] systemd[1]: Starting Braille Device Support... [ 71.723307] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 71.723796] systemd[1]: Mounting POSIX Message Queue File System... [ 71.724407] systemd[1]: Starting Nameserver information manager... [ 71.725017] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 71.725615] systemd[1]: Mounting Debug File System... [ 71.726108] systemd[1]: Started Read required files in advance. [ 71.914152] systemd[1]: Starting Load Kernel Modules... [ 71.914913] systemd[1]: Mounting Huge Pages File System... [ 71.915486] systemd[1]: Starting Uncomplicated firewall... [ 71.929219] systemd[1]: Listening on Process Core Dump Socket. [ 72.054392] systemd[1]: Reached target Remote File Systems. [ 72.054429] systemd[1]: Listening on udev Kernel Socket. [ 72.054443] systemd[1]: Reached target User and Group Name Lookups. [ 72.054469] systemd[1]: Listening on Syslog Socket. [ 72.066213] systemd[1]: Starting Journal Service... [ 72.094697] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 72.094724] systemd[1]: Reached target Slices. [ 72.107142] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 72.107517] systemd[1]: Started Uncomplicated firewall. [ 72.226198] systemd[1]: Starting Create Static Device Nodes in /dev... [ 72.290782] lp: driver loaded but no devices found [ 72.314318] ppdev: user-space parallel port driver [ 72.469596] systemd[1]: Started Load Kernel Modules. [ 72.490132] systemd[1]: Starting Apply Kernel Variables... [ 72.490850] systemd[1]: Mounting FUSE Control File System... [ 72.491384] systemd[1]: Started Journal Service. [ 74.083241] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 74.126391] systemd-journald[449]: Received request to flush runtime journal from PID 1 [ 74.555729] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB_.PCI0.LPC_.PMIO) (20150930/utaddress-254) [ 74.555734] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 74.555737] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.LPC_.LPIO) (20150930/utaddress-254) [ 74.555739] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 74.555740] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.LPC_.LPIO) (20150930/utaddress-254) [ 74.555742] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 74.555743] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.LPC_.LPIO) (20150930/utaddress-254) [ 74.555745] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 74.555745] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 74.688721] Non-volatile memory driver v1.3 [ 74.817232] thinkpad_acpi: ThinkPad ACPI Extras v0.25 [ 74.817234] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 74.817235] thinkpad_acpi: ThinkPad BIOS G2ETA1WW (2.61 ), EC unknown [ 74.817236] thinkpad_acpi: Lenovo ThinkPad X230, model 2306CTO [ 74.817494] thinkpad_acpi: detected a 16-level brightness capable ThinkPad [ 74.817585] thinkpad_acpi: radio switch found; radios are enabled [ 74.817595] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 74.817595] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 74.818370] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 74.819628] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7 [ 74.829121] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 75.063694] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 75.063696] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 75.063698] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) [ 75.063699] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 75.063700] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 75.063701] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 75.063702] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19 [ 75.063703] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 75.095155] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 75.095221] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 75.095283] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 75.095343] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 75.095406] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 75.095466] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 75.095525] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 75.265236] Intel(R) Wireless WiFi driver for Linux [ 75.265238] Copyright(c) 2003- 2015 Intel Corporation [ 75.265320] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 75.426851] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2 [ 75.431260] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2 [ 75.606298] iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm [ 75.670908] intel_rapl: Found RAPL domain package [ 75.670911] intel_rapl: Found RAPL domain core [ 75.670913] intel_rapl: Found RAPL domain uncore [ 75.670920] intel_rapl: RAPL package 0 domain package locked by BIOS [ 75.730316] media: Linux media interface: v0.10 [ 75.833295] Linux video capture interface: v2.00 [ 75.854628] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 75.854630] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 75.854631] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 75.854633] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74 [ 75.854721] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 75.979643] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 75.980669] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0 [ 76.256767] cfg80211: World regulatory domain updated: [ 76.256771] cfg80211: DFS Master region: unset [ 76.256772] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 76.256774] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 76.256775] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 76.256776] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 76.256778] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 76.256779] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 76.256780] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 76.256781] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 76.256782] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 77.140141] usb 3-1: set resolution quirk: cval->res = 384 [ 77.140479] usbcore: registered new interface driver snd-usb-audio [ 77.140697] uvcvideo: Found UVC 1.00 device (046d:0825) [ 77.155432] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input15 [ 77.155491] usbcore: registered new interface driver uvcvideo [ 77.155492] USB Video Class driver (1.1.1) [ 78.809603] Adding 16588284k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:16588284k FS [ 78.901260] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 78.938902] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null) [ 79.002021] zavl: module license 'CDDL' taints kernel. [ 79.002023] Disabling lock debugging due to kernel taint [ 79.054184] SPL: Loaded module v0.6.5.4-0ubuntu2 [ 79.193183] ZFS: Loaded module v0.6.5.4-0ubuntu2, ZFS pool version 5000, ZFS filesystem version 5 [ 79.733059] SPL: using hostid 0x007f0101 [ 82.213468] audit: type=1400 audit(1456842238.957:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=2092 comm="apparmor_parser" [ 82.213474] audit: type=1400 audit(1456842238.957:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=2092 comm="apparmor_parser" [ 82.239282] audit: type=1400 audit(1456842238.985:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=2092 comm="apparmor_parser" [ 82.239290] audit: type=1400 audit(1456842238.985:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=2092 comm="apparmor_parser" [ 82.239295] audit: type=1400 audit(1456842238.985:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=2092 comm="apparmor_parser" [ 82.239299] audit: type=1400 audit(1456842238.985:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-nesting" pid=2092 comm="apparmor_parser" [ 82.274075] audit: type=1400 audit(1456842239.017:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=2092 comm="apparmor_parser" [ 82.274082] audit: type=1400 audit(1456842239.017:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2092 comm="apparmor_parser" [ 82.274085] audit: type=1400 audit(1456842239.017:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=2092 comm="apparmor_parser" [ 82.274091] audit: type=1400 audit(1456842239.017:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=2092 comm="apparmor_parser" [ 83.201451] cgroup: new mount options do not match the existing superblock, will be ignored [ 84.495601] cgroup: new mount options do not match the existing superblock, will be ignored [ 87.303556] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 91.057920] audit_printk_skb: 27 callbacks suppressed [ 91.057925] audit: type=1400 audit(1456842247.801:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/lxc-start" pid=3297 comm="apparmor_parser" [ 91.066201] audit: type=1400 audit(1456842247.809:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default" pid=3300 comm="apparmor_parser" [ 91.066215] audit: type=1400 audit(1456842247.809:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default-cgns" pid=3300 comm="apparmor_parser" [ 91.066224] audit: type=1400 audit(1456842247.809:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default-with-mounting" pid=3300 comm="apparmor_parser" [ 91.066232] audit: type=1400 audit(1456842247.809:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default-with-nesting" pid=3300 comm="apparmor_parser" [ 91.262684] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 91.515390] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 91.519484] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 91.519711] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 91.526459] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 91.526572] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 91.749213] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 91.755993] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 91.756095] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 91.852928] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 92.877557] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 93.785473] audit: type=1400 audit(1456842250.533:26): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxd-juju-5f4bd172-ad22-4726-8d84-47185ab31b54-machine-0_" pid=3355 comm="apparmor_parser" [ 94.947874] audit: type=1400 audit(1456842251.693:27): apparmor="STATUS" operation="profile_remove" profile="unconfined" name="lxd-juju-5f4bd172-ad22-4726-8d84-47185ab31b54-machine-0_" pid=3420 comm="apparmor_parser" [ 96.094337] wlp3s0: authenticate with 4c:5e:0c:5d:53:df [ 96.140554] wlp3s0: send auth to 4c:5e:0c:5d:53:df (try 1/3) [ 96.143019] wlp3s0: authenticated [ 96.146733] wlp3s0: associate with 4c:5e:0c:5d:53:df (try 1/3) [ 96.153425] wlp3s0: RX AssocResp from 4c:5e:0c:5d:53:df (capab=0x431 status=0 aid=3) [ 96.168450] wlp3s0: associated [ 96.168512] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 98.204651] ip_tables: (C) 2000-2006 Netfilter Core Team [ 98.312609] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 98.621170] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 98.944666] audit: type=1400 audit(1456842255.689:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/lxc-start" pid=3890 comm="apparmor_parser" [ 98.950264] audit: type=1400 audit(1456842255.693:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default" pid=3893 comm="apparmor_parser" [ 98.950278] audit: type=1400 audit(1456842255.693:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default-cgns" pid=3893 comm="apparmor_parser" [ 98.950287] audit: type=1400 audit(1456842255.693:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default-with-mounting" pid=3893 comm="apparmor_parser" [ 98.950296] audit: type=1400 audit(1456842255.693:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default-with-nesting" pid=3893 comm="apparmor_parser" [ 99.627419] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 100.135994] Ebtables v2.0 registered [ 100.566905] audit: type=1400 audit(1456842257.313:33): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxd-juju-5f4bd172-ad22-4726-8d84-47185ab31b54-machine-1_" pid=3965 comm="apparmor_parser" [ 101.283357] device veth055W59 entered promiscuous mode [ 101.283636] IPv6: ADDRCONF(NETDEV_UP): veth055W59: link is not ready [ 101.460187] eth0: renamed from veth29HJGS [ 101.611001] device virbr0-nic entered promiscuous mode [ 101.986304] virbr0: port 1(virbr0-nic) entered listening state [ 101.986333] virbr0: port 1(virbr0-nic) entered listening state [ 102.427838] virbr0: port 1(virbr0-nic) entered disabled state [ 103.375483] audit: type=1400 audit(1456842259.370:34): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxd-juju-5f4bd172-ad22-4726-8d84-47185ab31b54-machine-2_" pid=4290 comm="apparmor_parser" [ 103.885029] device vethONMA25 entered promiscuous mode [ 103.885374] IPv6: ADDRCONF(NETDEV_UP): vethONMA25: link is not ready [ 103.885381] lxcbr0: port 2(vethONMA25) entered forwarding state [ 103.885418] lxcbr0: port 2(vethONMA25) entered forwarding state [ 103.885546] lxcbr0: port 2(vethONMA25) entered disabled state [ 103.983477] eth0: renamed from veth0L2C8H [ 105.580359] audit: type=1400 audit(1456842261.574:35): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxd-juju-5f4bd172-ad22-4726-8d84-47185ab31b54-machine-3_" pid=4456 comm="apparmor_parser" [ 105.893926] device veth5DFWFX entered promiscuous mode [ 105.898463] IPv6: ADDRCONF(NETDEV_UP): veth5DFWFX: link is not ready [ 105.984710] eth0: renamed from vethOK86LN [ 108.599892] audit: type=1400 audit(1456842264.597:36): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxd-juju-5f4bd172-ad22-4726-8d84-47185ab31b54-machine-4_" pid=4679 comm="apparmor_parser" [ 109.043753] device vethL5HRHI entered promiscuous mode [ 109.044081] IPv6: ADDRCONF(NETDEV_UP): vethL5HRHI: link is not ready [ 109.158473] eth0: renamed from vethQE4JYI [ 111.120405] audit: type=1400 audit(1456842267.115:37): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxd-juju-5f4bd172-ad22-4726-8d84-47185ab31b54-machine-5_" pid=8692 comm="apparmor_parser" [ 111.701877] device veth9DOURT entered promiscuous mode [ 111.702084] IPv6: ADDRCONF(NETDEV_UP): veth9DOURT: link is not ready [ 111.779665] eth0: renamed from vethBIOVDO [ 113.454721] IPv6: ADDRCONF(NETDEV_CHANGE): veth5DFWFX: link becomes ready [ 113.454847] lxcbr0: port 3(veth5DFWFX) entered forwarding state [ 113.454895] lxcbr0: port 3(veth5DFWFX) entered forwarding state [ 113.884748] audit: type=1400 audit(1456842269.878:38): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxd-juju-5f4bd172-ad22-4726-8d84-47185ab31b54-machine-6_" pid=9686 comm="apparmor_parser" [ 114.363390] device vethJMSU07 entered promiscuous mode [ 114.363509] IPv6: ADDRCONF(NETDEV_UP): vethJMSU07: link is not ready [ 114.363512] lxcbr0: port 6(vethJMSU07) entered forwarding state [ 114.363528] lxcbr0: port 6(vethJMSU07) entered forwarding state [ 114.443932] eth0: renamed from vethLAF0TQ [ 114.462740] lxcbr0: port 6(vethJMSU07) entered disabled state [ 115.770020] IPv6: ADDRCONF(NETDEV_CHANGE): vethL5HRHI: link becomes ready [ 115.770147] lxcbr0: port 4(vethL5HRHI) entered forwarding state [ 115.770189] lxcbr0: port 4(vethL5HRHI) entered forwarding state [ 117.050544] IPv6: ADDRCONF(NETDEV_CHANGE): veth055W59: link becomes ready [ 117.050611] lxcbr0: port 1(veth055W59) entered forwarding state [ 117.050629] lxcbr0: port 1(veth055W59) entered forwarding state [ 120.531257] IPv6: ADDRCONF(NETDEV_CHANGE): veth9DOURT: link becomes ready [ 120.531361] lxcbr0: port 5(veth9DOURT) entered forwarding state [ 120.531387] lxcbr0: port 5(veth9DOURT) entered forwarding state [ 121.130258] audit: type=1400 audit(1456842277.126:39): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxd-juju-5f4bd172-ad22-4726-8d84-47185ab31b54-machine-7_" pid=12666 comm="apparmor_parser" [ 122.668152] device vethSPAKIM entered promiscuous mode [ 122.668343] IPv6: ADDRCONF(NETDEV_UP): vethSPAKIM: link is not ready [ 122.731559] IPv6: ADDRCONF(NETDEV_CHANGE): vethONMA25: link becomes ready [ 122.731679] lxcbr0: port 2(vethONMA25) entered forwarding state [ 122.731700] lxcbr0: port 2(vethONMA25) entered forwarding state [ 122.731758] eth0: renamed from vethNQ749T [ 126.258986] IPv6: ADDRCONF(NETDEV_CHANGE): vethJMSU07: link becomes ready [ 126.259109] lxcbr0: port 6(vethJMSU07) entered forwarding state [ 126.259148] lxcbr0: port 6(vethJMSU07) entered forwarding state [ 128.498528] lxcbr0: port 3(veth5DFWFX) entered forwarding state [ 129.433910] IPv6: ADDRCONF(NETDEV_CHANGE): vethSPAKIM: link becomes ready [ 129.433998] lxcbr0: port 7(vethSPAKIM) entered forwarding state [ 129.434022] lxcbr0: port 7(vethSPAKIM) entered forwarding state [ 130.802416] lxcbr0: port 4(vethL5HRHI) entered forwarding state [ 132.082379] lxcbr0: port 1(veth055W59) entered forwarding state [ 135.538256] lxcbr0: port 5(veth9DOURT) entered forwarding state [ 136.639451] cgroup: new mount options do not match the existing superblock, will be ignored [ 137.062471] cgroup: new mount options do not match the existing superblock, will be ignored [ 137.078464] cgroup: new mount options do not match the existing superblock, will be ignored [ 137.098486] cgroup: new mount options do not match the existing superblock, will be ignored [ 137.126425] cgroup: new mount options do not match the existing superblock, will be ignored [ 137.146589] cgroup: new mount options do not match the existing superblock, will be ignored [ 137.170560] cgroup: new mount options do not match the existing superblock, will be ignored [ 137.190416] cgroup: new mount options do not match the existing superblock, will be ignored [ 137.218447] cgroup: new mount options do not match the existing superblock, will be ignored [ 137.238449] cgroup: new mount options do not match the existing superblock, will be ignored [ 137.254478] cgroup: new mount options do not match the existing superblock, will be ignored [ 137.778173] lxcbr0: port 2(vethONMA25) entered forwarding state [ 141.298057] lxcbr0: port 6(vethJMSU07) entered forwarding state [ 144.437930] lxcbr0: port 7(vethSPAKIM) entered forwarding state [ 146.992410] device vethDA12HM entered promiscuous mode [ 146.992569] IPv6: ADDRCONF(NETDEV_UP): vethDA12HM: link is not ready [ 147.115518] eth0: renamed from vethRSSIBL [ 147.912070] device vethA1INGN entered promiscuous mode [ 147.912162] IPv6: ADDRCONF(NETDEV_UP): vethA1INGN: link is not ready [ 147.912166] lxcbr0: port 2(vethA1INGN) entered forwarding state [ 147.912173] lxcbr0: port 2(vethA1INGN) entered forwarding state [ 148.006324] lxcbr0: port 2(vethA1INGN) entered disabled state [ 148.013759] eth0: renamed from vethTDBKPJ [ 149.216377] device vethGYRIQC entered promiscuous mode [ 149.216442] IPv6: ADDRCONF(NETDEV_UP): vethGYRIQC: link is not ready [ 149.216446] lxcbr0: port 3(vethGYRIQC) entered forwarding state [ 149.216457] lxcbr0: port 3(vethGYRIQC) entered forwarding state [ 149.216496] lxcbr0: port 3(vethGYRIQC) entered disabled state [ 149.316588] eth0: renamed from vethC5Y0I7 [ 151.135049] IPv6: ADDRCONF(NETDEV_CHANGE): vethDA12HM: link becomes ready [ 151.135081] lxcbr0: port 1(vethDA12HM) entered forwarding state [ 151.135100] lxcbr0: port 1(vethDA12HM) entered forwarding state [ 155.370494] IPv6: ADDRCONF(NETDEV_CHANGE): vethA1INGN: link becomes ready [ 155.370520] lxcbr0: port 2(vethA1INGN) entered forwarding state [ 155.370527] lxcbr0: port 2(vethA1INGN) entered forwarding state [ 156.557661] IPv6: ADDRCONF(NETDEV_CHANGE): vethGYRIQC: link becomes ready [ 156.557699] lxcbr0: port 3(vethGYRIQC) entered forwarding state [ 156.557711] lxcbr0: port 3(vethGYRIQC) entered forwarding state [ 166.161668] lxcbr0: port 1(vethDA12HM) entered forwarding state [ 170.417806] lxcbr0: port 2(vethA1INGN) entered forwarding state [ 171.569890] lxcbr0: port 3(vethGYRIQC) entered forwarding state [ 457.654087] usb 3-1: reset high-speed USB device number 2 using xhci_hcd [ 3726.872213] audit: type=1400 audit(1456845882.795:40): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxd-juju-5f4bd172-ad22-4726-8d84-47185ab31b54-machine-0_" pid=28379 comm="apparmor_parser" [ 3726.905930] device vethO2VHG6 entered promiscuous mode [ 3726.906103] IPv6: ADDRCONF(NETDEV_UP): vethO2VHG6: link is not ready [ 3727.001169] eth0: renamed from vethXEV1EO [ 3727.437661] IPv6: ADDRCONF(NETDEV_CHANGE): vethO2VHG6: link becomes ready [ 3727.437740] lxcbr0: port 8(vethO2VHG6) entered forwarding state [ 3727.437764] lxcbr0: port 8(vethO2VHG6) entered forwarding state [ 3742.456575] lxcbr0: port 8(vethO2VHG6) entered forwarding state [ 4135.599093] perf interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [ 5867.010847] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1) [ 5867.010848] CPU1: Core temperature above threshold, cpu clock throttled (total events = 1) [ 5867.010850] CPU2: Package temperature above threshold, cpu clock throttled (total events = 1) [ 5867.010851] CPU3: Package temperature above threshold, cpu clock throttled (total events = 1) [ 5867.010852] CPU1: Package temperature above threshold, cpu clock throttled (total events = 1) [ 5867.010853] mce: [Hardware Error]: Machine check events logged [ 5867.010861] CPU0: Package temperature above threshold, cpu clock throttled (total events = 1) [ 5867.010863] mce: [Hardware Error]: Machine check events logged [ 5867.017880] CPU1: Core temperature/speed normal [ 5867.017881] CPU0: Core temperature/speed normal [ 5867.017882] CPU2: Package temperature/speed normal [ 5867.017883] CPU3: Package temperature/speed normal [ 5867.017886] CPU0: Package temperature/speed normal [ 5867.017889] CPU1: Package temperature/speed normal [ 8251.681624] CPU0: Core temperature above threshold, cpu clock throttled (total events = 124) [ 8251.681625] CPU1: Core temperature above threshold, cpu clock throttled (total events = 124) [ 8251.681626] CPU3: Package temperature above threshold, cpu clock throttled (total events = 124) [ 8251.681627] CPU2: Package temperature above threshold, cpu clock throttled (total events = 124) [ 8251.681628] CPU1: Package temperature above threshold, cpu clock throttled (total events = 124) [ 8251.681631] mce_notify_irq: 2 callbacks suppressed [ 8251.681632] mce: [Hardware Error]: Machine check events logged [ 8251.681636] CPU0: Package temperature above threshold, cpu clock throttled (total events = 124) [ 8251.681638] mce: [Hardware Error]: Machine check events logged [ 8251.686598] CPU0: Core temperature/speed normal [ 8251.686598] CPU1: Core temperature/speed normal [ 8251.686601] CPU1: Package temperature/speed normal [ 8251.686602] CPU0: Package temperature/speed normal [ 8251.686613] CPU3: Package temperature/speed normal [ 8251.686614] CPU2: Package temperature/speed normal [ 8905.758780] usb 3-1: USB disconnect, device number 2 [ 8907.081203] thinkpad_acpi: EC reports that Thermal Table has changed [ 8907.211959] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=600 [ 8907.360128] EXT4-fs (sda2): re-mounted. Opts: block_validity,barrier,user_xattr,acl,stripe=4