[ 0.000000] Linux version 5.3.0-48-generic (buildd@lcy01-amd64-018) (gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2)) #41-Ubuntu SMP Fri Apr 10 06:59:18 UTC 2020 (Ubuntu 5.3.0-48.41-generic 5.3.18) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-48-generic root=UUID=4c28d0d7-016e-4c89-9f90-ca02c10df693 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64 [ 0.000000] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512 [ 0.000000] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024 [ 0.000000] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8 [ 0.000000] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000033909fff] usable [ 0.000000] BIOS-e820: [mem 0x000000003390a000-0x000000003390afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000003390b000-0x0000000033960fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000033961000-0x0000000033961fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000033962000-0x0000000042a2efff] usable [ 0.000000] BIOS-e820: [mem 0x0000000042a2f000-0x000000004518efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000004518f000-0x0000000045f7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000045f7f000-0x0000000045ffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000045fff000-0x0000000045ffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000046000000-0x0000000049ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000004a200000-0x000000004a3fffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000004b000000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fc800000-0x00000000fe7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed17fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feda0000-0x00000000feda1fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff400000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000002afbfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x3114e018-0x3115e057] usable ==> usable [ 0.000000] e820: update [mem 0x3114e018-0x3115e057] usable ==> usable [ 0.000000] e820: update [mem 0x3113d018-0x3114d057] usable ==> usable [ 0.000000] e820: update [mem 0x3113d018-0x3114d057] usable ==> usable [ 0.000000] e820: update [mem 0x3111f018-0x3113cc57] usable ==> usable [ 0.000000] e820: update [mem 0x3111f018-0x3113cc57] usable ==> usable [ 0.000000] e820: update [mem 0x31113018-0x3111e657] usable ==> usable [ 0.000000] e820: update [mem 0x31113018-0x3111e657] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000031113017] usable [ 0.000000] reserve setup_data: [mem 0x0000000031113018-0x000000003111e657] usable [ 0.000000] reserve setup_data: [mem 0x000000003111e658-0x000000003111f017] usable [ 0.000000] reserve setup_data: [mem 0x000000003111f018-0x000000003113cc57] usable [ 0.000000] reserve setup_data: [mem 0x000000003113cc58-0x000000003113d017] usable [ 0.000000] reserve setup_data: [mem 0x000000003113d018-0x000000003114d057] usable [ 0.000000] reserve setup_data: [mem 0x000000003114d058-0x000000003114e017] usable [ 0.000000] reserve setup_data: [mem 0x000000003114e018-0x000000003115e057] usable [ 0.000000] reserve setup_data: [mem 0x000000003115e058-0x0000000033909fff] usable [ 0.000000] reserve setup_data: [mem 0x000000003390a000-0x000000003390afff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000003390b000-0x0000000033960fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000033961000-0x0000000033961fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000033962000-0x0000000042a2efff] usable [ 0.000000] reserve setup_data: [mem 0x0000000042a2f000-0x000000004518efff] reserved [ 0.000000] reserve setup_data: [mem 0x000000004518f000-0x0000000045f7efff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x0000000045f7f000-0x0000000045ffefff] ACPI data [ 0.000000] reserve setup_data: [mem 0x0000000045fff000-0x0000000045ffffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000046000000-0x0000000049ffffff] reserved [ 0.000000] reserve setup_data: [mem 0x000000004a200000-0x000000004a3fffff] reserved [ 0.000000] reserve setup_data: [mem 0x000000004b000000-0x00000000cfffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fc800000-0x00000000fe7fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed17fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000feda0000-0x00000000feda1fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff400000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000002afbfffff] usable [ 0.000000] efi: EFI v2.70 by INSYDE Corp. [ 0.000000] efi: ACPI=0x45ffe000 ACPI 2.0=0x45ffe014 TPMFinalLog=0x45f32000 ESRT=0x44394d18 SMBIOS=0x43d71000 SMBIOS 3.0=0x43d6f000 MEMATTR=0x31031018 TPMEventLog=0x3115f018 [ 0.000000] secureboot: Secure boot enabled [ 0.000000] Kernel is locked down from EFI secure boot; see man kernel_lockdown.7 [ 0.000000] SMBIOS 3.2.0 present. [ 0.000000] DMI: HP HP Pavilion Laptop 14-ce3xxx/86E1, BIOS F.05 01/01/2020 [ 0.000000] tsc: Detected 1200.000 MHz processor [ 0.000008] tsc: Detected 1190.400 MHz TSC [ 0.000008] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000010] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000015] last_pfn = 0x2afc00 max_arch_pfn = 0x400000000 [ 0.000018] MTRR default type: write-back [ 0.000019] MTRR fixed ranges enabled: [ 0.000019] 00000-9FFFF write-back [ 0.000020] A0000-BFFFF uncachable [ 0.000020] C0000-FFFFF write-protect [ 0.000021] MTRR variable ranges enabled: [ 0.000022] 0 base 0080000000 mask 7F80000000 uncachable [ 0.000023] 1 base 0060000000 mask 7FE0000000 uncachable [ 0.000023] 2 base 0050000000 mask 7FF0000000 uncachable [ 0.000024] 3 base 004C000000 mask 7FFC000000 uncachable [ 0.000024] 4 base 004B000000 mask 7FFF000000 uncachable [ 0.000025] 5 base 2000000000 mask 6000000000 uncachable [ 0.000025] 6 base 1000000000 mask 7000000000 uncachable [ 0.000026] 7 base 0800000000 mask 7800000000 uncachable [ 0.000026] 8 base 0400000000 mask 7C00000000 uncachable [ 0.000027] 9 base 4000000000 mask 4000000000 uncachable [ 0.000470] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000648] last_pfn = 0x46000 max_arch_pfn = 0x400000000 [ 0.006742] esrt: Reserving ESRT space from 0x0000000044394d18 to 0x0000000044394d50. [ 0.006753] check: Scanning 1 areas for low memory corruption [ 0.006757] Using GB pages for direct mapping [ 0.006759] BRK [0x196c01000, 0x196c01fff] PGTABLE [ 0.006760] BRK [0x196c02000, 0x196c02fff] PGTABLE [ 0.006760] BRK [0x196c03000, 0x196c03fff] PGTABLE [ 0.006778] BRK [0x196c04000, 0x196c04fff] PGTABLE [ 0.006779] BRK [0x196c05000, 0x196c05fff] PGTABLE [ 0.006857] BRK [0x196c06000, 0x196c06fff] PGTABLE [ 0.006894] BRK [0x196c07000, 0x196c07fff] PGTABLE [ 0.006929] BRK [0x196c08000, 0x196c08fff] PGTABLE [ 0.006995] BRK [0x196c09000, 0x196c09fff] PGTABLE [ 0.007039] RAMDISK: [mem 0x2da37000-0x30bd8fff] [ 0.007052] ACPI: Early table checksum verification disabled [ 0.007054] ACPI: RSDP 0x0000000045FFE014 000024 (v02 HPQOEM) [ 0.007056] ACPI: XSDT 0x0000000045FD0188 000124 (v01 HPQOEM SLIC-MPC 00000002 HP 01000013) [ 0.007061] ACPI: FACP 0x0000000045FD2000 00010C (v05 HPQOEM SLIC-MPC 00000002 HP 00040000) [ 0.007064] ACPI: DSDT 0x0000000045F9B000 032D1B (v02 HPQOEM 86E1 00000002 ACPI 00040000) [ 0.007066] ACPI: FACS 0x0000000045F0E000 000040 [ 0.007068] ACPI: UEFI 0x0000000045F7E000 000236 (v01 HPQOEM 86E1 00000001 HP 00040000) [ 0.007070] ACPI: SSDT 0x0000000045FF9000 003DF8 (v02 HPQOEM 86E1 00001000 ACPI 00040000) [ 0.007072] ACPI: SSDT 0x0000000045FF7000 001B60 (v02 HPQOEM 86E1 00003000 ACPI 00040000) [ 0.007073] ACPI: SSDT 0x0000000045FF3000 003389 (v02 HPQOEM 86E1 00003000 ACPI 00040000) [ 0.007075] ACPI: SSDT 0x0000000045FE7000 00B259 (v02 HPQOEM 86E1 00001000 ACPI 00040000) [ 0.007077] ACPI: SSDT 0x0000000045FE6000 000781 (v01 HPQOEM 86E1 00001000 ACPI 00040000) [ 0.007079] ACPI: TPM2 0x0000000045FE5000 000034 (v04 HPQOEM 86E1 00000002 HP 00040000) [ 0.007080] ACPI: SSDT 0x0000000045FE4000 0001D2 (v01 HPQOEM 86E1 00001000 ACPI 00040000) [ 0.007082] ACPI: SSDT 0x0000000045FDC000 007166 (v01 HPQOEM 86E1 00001000 ACPI 00040000) [ 0.007084] ACPI: MSDM 0x0000000045FDB000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000) [ 0.007085] ACPI: LPIT 0x0000000045FDA000 000094 (v01 HPQOEM 86E1 00000002 HP 00040000) [ 0.007087] ACPI: WSMT 0x0000000045FD9000 000028 (v01 HPQOEM 86E1 00000002 HP 00040000) [ 0.007089] ACPI: SSDT 0x0000000045FD8000 000B70 (v02 HPQOEM 86E1 00001000 ACPI 00040000) [ 0.007091] ACPI: DBGP 0x0000000045FD7000 000034 (v01 HPQOEM SLIC-MPC 00000002 HP 00040000) [ 0.007092] ACPI: DBG2 0x0000000045FD6000 000054 (v00 HPQOEM 86E1 00000002 HP 00040000) [ 0.007094] ACPI: SSDT 0x0000000045FD5000 0007EA (v02 HPQOEM 86E1 00001000 ACPI 00040000) [ 0.007096] ACPI: NHLT 0x0000000045FD4000 00002D (v00 HPQOEM 86E1 00000002 HP 00040000) [ 0.007097] ACPI: ECDT 0x0000000045FD3000 000069 (v01 HPQOEM 86E1 00000002 HP 00040000) [ 0.007099] ACPI: HPET 0x0000000045FD1000 000038 (v01 HPQOEM 86E1 00000002 HP 00040000) [ 0.007101] ACPI: APIC 0x0000000045FFD000 00012C (v03 HPQOEM 86E1 00000002 HP 00040000) [ 0.007102] ACPI: MCFG 0x0000000045FCF000 00003C (v01 HPQOEM 86E1 00000002 HP 00040000) [ 0.007104] ACPI: SSDT 0x0000000045F9A000 0000F5 (v01 HPQOEM 86E1 00000002 ACPI 00040000) [ 0.007106] ACPI: DMAR 0x0000000045F99000 0000A8 (v02 HPQOEM 86E1 00000002 HP 00040000) [ 0.007108] ACPI: SSDT 0x0000000045F95000 00333E (v01 HPQOEM 86E1 00001000 ACPI 00040000) [ 0.007109] ACPI: SSDT 0x0000000045F94000 000987 (v02 HPQOEM 86E1 00001000 ACPI 00040000) [ 0.007111] ACPI: SSDT 0x0000000045F93000 000164 (v01 HPQOEM 86E1 00001000 ACPI 00040000) [ 0.007113] ACPI: SSDT 0x0000000045F92000 00005C (v02 HPQOEM 86E1 00001000 ACPI 00040000) [ 0.007114] ACPI: UEFI 0x0000000045738000 00063A (v01 HPQOEM 86E1 00000000 HP 00040000) [ 0.007116] ACPI: UEFI 0x0000000045737000 00005C (v01 HPQOEM 86E1 00000000 HP 00040000) [ 0.007118] ACPI: FPDT 0x0000000045F91000 000044 (v01 HPQOEM SLIC-MPC 00000002 HP 00040000) [ 0.007120] ACPI: BGRT 0x0000000045F90000 000038 (v01 HPQOEM 86E1 00000001 HP 00040000) [ 0.007125] ACPI: Local APIC address 0xfee00000 [ 0.007329] No NUMA configuration found [ 0.007329] Faking a node at [mem 0x0000000000000000-0x00000002afbfffff] [ 0.007334] NODE_DATA(0) allocated [mem 0x2afbd5000-0x2afbfffff] [ 0.007445] Zone ranges: [ 0.007445] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.007446] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.007447] Normal [mem 0x0000000100000000-0x00000002afbfffff] [ 0.007447] Device empty [ 0.007448] Movable zone start for each node [ 0.007450] Early memory node ranges [ 0.007451] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.007452] node 0: [mem 0x0000000000100000-0x0000000033909fff] [ 0.007452] node 0: [mem 0x000000003390b000-0x0000000033960fff] [ 0.007452] node 0: [mem 0x0000000033962000-0x0000000042a2efff] [ 0.007453] node 0: [mem 0x0000000045fff000-0x0000000045ffffff] [ 0.007453] node 0: [mem 0x0000000100000000-0x00000002afbfffff] [ 0.007637] Zeroed struct page in unavailable ranges: 23092 pages [ 0.007638] Initmem setup node 0 [mem 0x0000000000001000-0x00000002afbfffff] [ 0.007639] On node 0 totalpages: 2041292 [ 0.007640] DMA zone: 64 pages used for memmap [ 0.007640] DMA zone: 21 pages reserved [ 0.007641] DMA zone: 3998 pages, LIFO batch:0 [ 0.007669] DMA32 zone: 4201 pages used for memmap [ 0.007669] DMA32 zone: 268846 pages, LIFO batch:63 [ 0.011674] Normal zone: 27632 pages used for memmap [ 0.011674] Normal zone: 1768448 pages, LIFO batch:63 [ 0.025790] x86/hpet: Will disable the HPET for this platform because it's not reliable [ 0.025806] Reserving Intel graphics memory at [mem 0x4c800000-0x503fffff] [ 0.026178] ACPI: PM-Timer IO Port: 0x1808 [ 0.026179] ACPI: Local APIC address 0xfee00000 [ 0.026185] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.026186] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.026186] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.026187] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.026187] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.026187] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.026188] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.026188] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.026188] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.026189] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.026189] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.026189] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 0.026190] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) [ 0.026190] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) [ 0.026190] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) [ 0.026191] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) [ 0.026225] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.026226] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.026227] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.026228] ACPI: IRQ0 used by override. [ 0.026229] ACPI: IRQ9 used by override. [ 0.026230] Using ACPI (MADT) for SMP configuration information [ 0.026231] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.026237] e820: update [mem 0x311f4000-0x31207fff] usable ==> reserved [ 0.026244] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.026258] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.026260] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.026261] PM: Registered nosave memory: [mem 0x31113000-0x31113fff] [ 0.026262] PM: Registered nosave memory: [mem 0x3111e000-0x3111efff] [ 0.026262] PM: Registered nosave memory: [mem 0x3111f000-0x3111ffff] [ 0.026263] PM: Registered nosave memory: [mem 0x3113c000-0x3113cfff] [ 0.026263] PM: Registered nosave memory: [mem 0x3113d000-0x3113dfff] [ 0.026264] PM: Registered nosave memory: [mem 0x3114d000-0x3114dfff] [ 0.026265] PM: Registered nosave memory: [mem 0x3114e000-0x3114efff] [ 0.026266] PM: Registered nosave memory: [mem 0x3115e000-0x3115efff] [ 0.026267] PM: Registered nosave memory: [mem 0x311f4000-0x31207fff] [ 0.026268] PM: Registered nosave memory: [mem 0x3390a000-0x3390afff] [ 0.026269] PM: Registered nosave memory: [mem 0x33961000-0x33961fff] [ 0.026270] PM: Registered nosave memory: [mem 0x42a2f000-0x4518efff] [ 0.026270] PM: Registered nosave memory: [mem 0x4518f000-0x45f7efff] [ 0.026270] PM: Registered nosave memory: [mem 0x45f7f000-0x45ffefff] [ 0.026271] PM: Registered nosave memory: [mem 0x46000000-0x49ffffff] [ 0.026272] PM: Registered nosave memory: [mem 0x4a000000-0x4a1fffff] [ 0.026272] PM: Registered nosave memory: [mem 0x4a200000-0x4a3fffff] [ 0.026272] PM: Registered nosave memory: [mem 0x4a400000-0x4affffff] [ 0.026273] PM: Registered nosave memory: [mem 0x4b000000-0xcfffffff] [ 0.026273] PM: Registered nosave memory: [mem 0xd0000000-0xfc7fffff] [ 0.026273] PM: Registered nosave memory: [mem 0xfc800000-0xfe7fffff] [ 0.026274] PM: Registered nosave memory: [mem 0xfe800000-0xfebfffff] [ 0.026274] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.026274] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.026275] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.026275] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff] [ 0.026275] PM: Registered nosave memory: [mem 0xfed10000-0xfed17fff] [ 0.026276] PM: Registered nosave memory: [mem 0xfed18000-0xfed1ffff] [ 0.026276] PM: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] [ 0.026276] PM: Registered nosave memory: [mem 0xfed80000-0xfed9ffff] [ 0.026277] PM: Registered nosave memory: [mem 0xfeda0000-0xfeda1fff] [ 0.026277] PM: Registered nosave memory: [mem 0xfeda2000-0xfedfffff] [ 0.026277] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.026278] PM: Registered nosave memory: [mem 0xfee01000-0xff3fffff] [ 0.026278] PM: Registered nosave memory: [mem 0xff400000-0xffffffff] [ 0.026279] [mem 0xd0000000-0xfc7fffff] available for PCI devices [ 0.026280] Booting paravirtualized kernel on bare hardware [ 0.026282] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.026287] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.026483] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144 [ 0.026488] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152 [ 0.026489] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.026509] Built 1 zonelists, mobility grouping on. Total pages: 2009374 [ 0.026509] Policy zone: Normal [ 0.026510] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-48-generic root=UUID=4c28d0d7-016e-4c89-9f90-ca02c10df693 ro quiet splash vt.handoff=7 [ 0.027004] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.027218] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.027270] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.030896] Calgary: detecting Calgary via BIOS EBDA area [ 0.030897] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.049862] Memory: 7795680K/8165168K available (14339K kernel code, 2387K rwdata, 4728K rodata, 2676K init, 5044K bss, 369488K reserved, 0K cma-reserved) [ 0.049975] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.049984] ftrace: allocating 43602 entries in 171 pages [ 0.061546] rcu: Hierarchical RCU implementation. [ 0.061547] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.061548] Tasks RCU enabled. [ 0.061548] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.061549] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.063652] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 [ 0.064034] random: crng done (trusting CPU's manufacturer) [ 0.064053] vt handoff: transparent VT on vt#7 [ 0.064057] Console: colour dummy device 80x25 [ 0.064060] printk: console [tty0] enabled [ 0.064072] ACPI: Core revision 20190703 [ 0.064323] APIC: Switch to symmetric I/O mode setup [ 0.064325] DMAR: Host address width 39 [ 0.064326] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.064330] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 49e2ff0505e [ 0.064330] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.064335] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.064336] DMAR: RMRR base: 0x00000045041000 end: 0x00000045060fff [ 0.064337] DMAR: RMRR base: 0x0000004c000000 end: 0x000000503fffff [ 0.064338] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.064339] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.064339] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.064340] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.066024] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.066025] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.070387] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1128af0325d, max_idle_ns: 440795261011 ns [ 0.070392] Calibrating delay loop (skipped), value calculated using timer frequency.. 2380.80 BogoMIPS (lpj=4761600) [ 0.070393] pid_max: default: 32768 minimum: 301 [ 0.072915] LSM: Security Framework initializing [ 0.072926] Yama: becoming mindful. [ 0.072956] AppArmor: AppArmor initialized [ 0.072990] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.072999] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.073120] *** VALIDATE proc *** [ 0.073153] *** VALIDATE cgroup1 *** [ 0.073154] *** VALIDATE cgroup2 *** [ 0.073191] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 0.073210] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.073246] process: using mwait in idle threads [ 0.073248] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.073248] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.073251] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.073253] Spectre V2 : Mitigation: Enhanced IBRS [ 0.073253] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.073254] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.073255] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.073455] Freeing SMP alternatives memory: 36K [ 0.074389] TSC deadline timer enabled [ 0.074389] smpboot: CPU0: Intel(R) Core(TM) i5-1035G1 CPU @ 1.00GHz (family: 0x6, model: 0x7e, stepping: 0x5) [ 0.074389] Performance Events: PEBS fmt4+-baseline, Icelake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.074389] ... version: 5 [ 0.074389] ... bit width: 48 [ 0.074389] ... generic registers: 8 [ 0.074389] ... value mask: 0000ffffffffffff [ 0.074389] ... max period: 00007fffffffffff [ 0.074389] ... fixed-purpose events: 4 [ 0.074389] ... event mask: 0000000f000000ff [ 0.074389] rcu: Hierarchical SRCU implementation. [ 0.074389] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.074389] smp: Bringing up secondary CPUs ... [ 0.074389] x86: Booting SMP configuration: [ 0.074389] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.075331] smp: Brought up 1 node, 8 CPUs [ 0.075331] smpboot: Max logical packages: 1 [ 0.075331] smpboot: Total of 8 processors activated (19046.40 BogoMIPS) [ 0.078561] devtmpfs: initialized [ 0.078561] x86/mm: Memory block size: 128MB [ 0.078896] PM: Registering ACPI NVS region [mem 0x3390a000-0x3390afff] (4096 bytes) [ 0.078896] PM: Registering ACPI NVS region [mem 0x4518f000-0x45f7efff] (14614528 bytes) [ 0.078896] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.078896] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.078896] pinctrl core: initialized pinctrl subsystem [ 0.078896] PM: RTC time: 21:32:13, date: 2020-04-23 [ 0.078896] NET: Registered protocol family 16 [ 0.078896] audit: initializing netlink subsys (disabled) [ 0.078896] audit: type=2000 audit(1587677532.008:1): state=initialized audit_enabled=0 res=1 [ 0.078896] EISA bus registered [ 0.078896] cpuidle: using governor ladder [ 0.078896] cpuidle: using governor menu [ 0.078896] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.078896] ACPI: bus type PCI registered [ 0.078896] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.078896] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) [ 0.078896] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820 [ 0.078896] PCI: Using configuration type 1 for base access [ 0.078896] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.079007] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.079007] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.082448] ACPI: Added _OSI(Module Device) [ 0.082449] ACPI: Added _OSI(Processor Device) [ 0.082449] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.082449] ACPI: Added _OSI(Processor Aggregator Device) [ 0.082450] ACPI: Added _OSI(Linux-Dell-Video) [ 0.082451] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.082451] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.129710] ACPI: 15 ACPI AML tables successfully acquired and loaded [ 0.129710] ACPI: EC: EC started [ 0.129710] ACPI: EC: interrupt blocked [ 0.196585] ACPI: \: Used as first EC [ 0.196586] ACPI: \: GPE=0x6e, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.196586] ACPI: EC: Boot ECDT EC used to handle transactions [ 0.206877] ACPI: Dynamic OEM Table Load: [ 0.206889] ACPI: SSDT 0xFFFF8BEFE5F93400 0000F4 (v02 PmRef Cpu0Psd 00003000 INTL 20160422) [ 0.208066] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked [ 0.209487] ACPI: Dynamic OEM Table Load: [ 0.209493] ACPI: SSDT 0xFFFF8BEFE5FB3800 000386 (v02 PmRef Cpu0Cst 00003001 INTL 20160422) [ 0.210673] ACPI: Dynamic OEM Table Load: [ 0.210679] ACPI: SSDT 0xFFFF8BEFE5FB2400 000371 (v02 PmRef Cpu0Ist 00003000 INTL 20160422) [ 0.211884] ACPI: Dynamic OEM Table Load: [ 0.211889] ACPI: SSDT 0xFFFF8BEFE5B9E400 00012C (v02 PmRef Cpu0Hwp 00003000 INTL 20160422) [ 0.212983] ACPI: Dynamic OEM Table Load: [ 0.212989] ACPI: SSDT 0xFFFF8BEFE62FE000 000724 (v02 PmRef HwpLvt 00003000 INTL 20160422) [ 0.214328] ACPI: Dynamic OEM Table Load: [ 0.214334] ACPI: SSDT 0xFFFF8BEFE62F8000 0005FC (v02 PmRef ApIst 00003000 INTL 20160422) [ 0.215586] ACPI: Dynamic OEM Table Load: [ 0.215591] ACPI: SSDT 0xFFFF8BEFE5FB6800 000317 (v02 PmRef ApHwp 00003000 INTL 20160422) [ 0.216837] ACPI: Dynamic OEM Table Load: [ 0.216842] ACPI: SSDT 0xFFFF8BEFE5FBD000 000AB0 (v02 PmRef ApPsd 00003000 INTL 20160422) [ 0.218557] ACPI: Dynamic OEM Table Load: [ 0.218563] ACPI: SSDT 0xFFFF8BEFE5FB3000 00030A (v02 PmRef ApCst 00003000 INTL 20160422) [ 0.222710] ACPI: Interpreter enabled [ 0.222750] ACPI: (supports S0 S3 S4 S5) [ 0.222751] ACPI: Using IOAPIC for interrupt routing [ 0.222786] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.223913] ACPI: Enabled 10 GPEs in block 00 to 7F [ 0.229669] ACPI: Power Resource [PC01] (on) [ 0.235135] ACPI: Power Resource [V0PR] (on) [ 0.235268] ACPI: Power Resource [V1PR] (on) [ 0.235399] ACPI: Power Resource [V2PR] (on) [ 0.239804] ACPI: Power Resource [WRST] (on) [ 0.239992] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1) [ 0.244503] ACPI: Power Resource [TBT0] (on) [ 0.244547] ACPI: Power Resource [TBT1] (on) [ 0.252312] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.IPPF._STA.POS1], AE_NOT_FOUND (20190703/psargs-330) [ 0.252318] No Local Variables are initialized for Method [_STA] [ 0.252318] No Arguments are initialized for method [_STA] [ 0.252319] ACPI Error: Aborting method \_SB.IPPF._STA due to previous error (AE_NOT_FOUND) (20190703/psparse-529) [ 0.252842] ACPI: Power Resource [PIN] (off) [ 0.253259] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.253263] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.254954] acpi PNP0A08:00: _OSC: platform does not support [AER] [ 0.257856] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR] [ 0.257857] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.261046] PCI host bridge to bus 0000:00 [ 0.261047] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.261048] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.261049] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.261049] pci_bus 0000:00: root bus resource [mem 0x50400000-0xbfffffff window] [ 0.261050] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window] [ 0.261050] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.261063] pci 0000:00:00.0: [8086:8a12] type 00 class 0x060000 [ 0.262395] pci 0000:00:02.0: [8086:8a56] type 00 class 0x030000 [ 0.262406] pci 0000:00:02.0: reg 0x10: [mem 0x6016000000-0x6016ffffff 64bit] [ 0.262411] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref] [ 0.262415] pci 0000:00:02.0: reg 0x20: [io 0x8000-0x803f] [ 0.262428] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.263513] pci 0000:00:04.0: [8086:8a03] type 00 class 0x118000 [ 0.263537] pci 0000:00:04.0: reg 0x10: [mem 0x6017100000-0x601710ffff 64bit] [ 0.264743] pci 0000:00:14.0: [8086:34ed] type 00 class 0x0c0330 [ 0.264769] pci 0000:00:14.0: reg 0x10: [mem 0x56000000-0x5600ffff 64bit] [ 0.264849] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.265954] pci 0000:00:14.2: [8086:34ef] type 00 class 0x050000 [ 0.265984] pci 0000:00:14.2: reg 0x10: [mem 0x6017118000-0x6017119fff 64bit] [ 0.266001] pci 0000:00:14.2: reg 0x18: [mem 0x6017120000-0x6017120fff 64bit] [ 0.267137] pci 0000:00:14.3: [8086:34f0] type 00 class 0x028000 [ 0.267171] pci 0000:00:14.3: reg 0x10: [mem 0x6017114000-0x6017117fff 64bit] [ 0.267307] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold [ 0.268425] pci 0000:00:15.0: [8086:34e8] type 00 class 0x0c8000 [ 0.268457] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 0.269718] pci 0000:00:15.1: [8086:34e9] type 00 class 0x0c8000 [ 0.269750] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 0.270960] pci 0000:00:16.0: [8086:34e0] type 00 class 0x078000 [ 0.270994] pci 0000:00:16.0: reg 0x10: [mem 0x601711d000-0x601711dfff 64bit] [ 0.271089] pci 0000:00:16.0: PME# supported from D3hot [ 0.272232] pci 0000:00:17.0: [8086:282a] type 00 class 0x010400 [ 0.272257] pci 0000:00:17.0: reg 0x10: [mem 0x56010000-0x56011fff] [ 0.272268] pci 0000:00:17.0: reg 0x14: [mem 0x56014000-0x560140ff] [ 0.272278] pci 0000:00:17.0: reg 0x18: [io 0x8080-0x8087] [ 0.272289] pci 0000:00:17.0: reg 0x1c: [io 0x8088-0x808b] [ 0.272299] pci 0000:00:17.0: reg 0x20: [io 0x8060-0x807f] [ 0.272310] pci 0000:00:17.0: reg 0x24: [mem 0x56013000-0x560137ff] [ 0.272364] pci 0000:00:17.0: PME# supported from D3hot [ 0.273477] pci 0000:00:1c.0: [8086:34b8] type 01 class 0x060400 [ 0.274594] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.275723] pci 0000:00:1c.4: [8086:34bc] type 01 class 0x060400 [ 0.275835] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.275857] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity [ 0.276978] pci 0000:00:1d.0: [8086:34b0] type 01 class 0x060400 [ 0.278077] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.279186] pci 0000:00:1d.1: [8086:34b1] type 01 class 0x060400 [ 0.279298] pci 0000:00:1d.1: PME# supported from D0 D3hot D3cold [ 0.279320] pci 0000:00:1d.1: PTM enabled (root), 4ns granularity [ 0.280442] pci 0000:00:1d.4: [8086:34b4] type 01 class 0x060400 [ 0.280565] pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold [ 0.280589] pci 0000:00:1d.4: PTM enabled (root), 4ns granularity [ 0.281747] pci 0000:00:1e.0: [8086:34a8] type 00 class 0x078000 [ 0.281782] pci 0000:00:1e.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 0.283021] pci 0000:00:1e.2: [8086:34aa] type 00 class 0x0c8000 [ 0.283053] pci 0000:00:1e.2: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 0.284269] pci 0000:00:1f.0: [8086:3482] type 00 class 0x060100 [ 0.285460] pci 0000:00:1f.3: [8086:34c8] type 00 class 0x040380 [ 0.285518] pci 0000:00:1f.3: reg 0x10: [mem 0x6017110000-0x6017113fff 64bit] [ 0.285568] pci 0000:00:1f.3: reg 0x20: [mem 0x6017000000-0x60170fffff 64bit] [ 0.285692] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.286835] pci 0000:00:1f.4: [8086:34a3] type 00 class 0x0c0500 [ 0.286866] pci 0000:00:1f.4: reg 0x10: [mem 0x601711a000-0x601711a0ff 64bit] [ 0.286900] pci 0000:00:1f.4: reg 0x20: [io 0x8040-0x805f] [ 0.288012] pci 0000:00:1f.5: [8086:34a4] type 00 class 0x0c8000 [ 0.288034] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] [ 0.289200] pci 0000:00:1c.0: PCI bridge to [bus 01-05] [ 0.289203] pci 0000:00:1c.0: bridge window [io 0x7000-0x7fff] [ 0.289205] pci 0000:00:1c.0: bridge window [mem 0x55000000-0x55ffffff] [ 0.289210] pci 0000:00:1c.0: bridge window [mem 0x6012000000-0x6012ffffff 64bit pref] [ 0.289272] pci 0000:06:00.0: [10de:174d] type 00 class 0x030200 [ 0.289302] pci 0000:06:00.0: reg 0x10: [mem 0x54000000-0x54ffffff] [ 0.289316] pci 0000:06:00.0: reg 0x14: [mem 0x6000000000-0x600fffffff 64bit pref] [ 0.289331] pci 0000:06:00.0: reg 0x1c: [mem 0x6010000000-0x6011ffffff 64bit pref] [ 0.289340] pci 0000:06:00.0: reg 0x24: [io 0x6000-0x607f] [ 0.289350] pci 0000:06:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref] [ 0.289369] pci 0000:06:00.0: Enabling HDA controller [ 0.289542] pci 0000:00:1c.4: PCI bridge to [bus 06-0a] [ 0.289544] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff] [ 0.289547] pci 0000:00:1c.4: bridge window [mem 0x54000000-0x54ffffff] [ 0.289551] pci 0000:00:1c.4: bridge window [mem 0x6000000000-0x6011ffffff 64bit pref] [ 0.289593] pci 0000:00:1d.0: PCI bridge to [bus 0b-0f] [ 0.289596] pci 0000:00:1d.0: bridge window [io 0x5000-0x5fff] [ 0.289598] pci 0000:00:1d.0: bridge window [mem 0x53000000-0x53ffffff] [ 0.289603] pci 0000:00:1d.0: bridge window [mem 0x6013000000-0x6013ffffff 64bit pref] [ 0.289662] pci 0000:10:00.0: [10ec:8168] type 00 class 0x020000 [ 0.289697] pci 0000:10:00.0: reg 0x10: [io 0x4000-0x40ff] [ 0.289728] pci 0000:10:00.0: reg 0x18: [mem 0x52004000-0x52004fff 64bit] [ 0.289747] pci 0000:10:00.0: reg 0x20: [mem 0x52000000-0x52003fff 64bit] [ 0.289866] pci 0000:10:00.0: supports D1 D2 [ 0.289867] pci 0000:10:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.290018] pci 0000:00:1d.1: PCI bridge to [bus 10-14] [ 0.290021] pci 0000:00:1d.1: bridge window [io 0x4000-0x4fff] [ 0.290023] pci 0000:00:1d.1: bridge window [mem 0x52000000-0x52ffffff] [ 0.290028] pci 0000:00:1d.1: bridge window [mem 0x6014000000-0x6014ffffff 64bit pref] [ 0.290320] pci 0000:15:00.0: [8086:f1a8] type 00 class 0x010802 [ 0.290359] pci 0000:15:00.0: reg 0x10: [mem 0x51000000-0x51003fff 64bit] [ 0.290674] pci 0000:00:1d.4: PCI bridge to [bus 15] [ 0.290676] pci 0000:00:1d.4: bridge window [io 0x3000-0x3fff] [ 0.290679] pci 0000:00:1d.4: bridge window [mem 0x51000000-0x51ffffff] [ 0.290683] pci 0000:00:1d.4: bridge window [mem 0x6015000000-0x6015ffffff 64bit pref] [ 0.294259] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.IPPF._STA.POS1], AE_NOT_FOUND (20190703/psargs-330) [ 0.294263] No Local Variables are initialized for Method [_STA] [ 0.294264] No Arguments are initialized for method [_STA] [ 0.294265] ACPI Error: Aborting method \_SB.IPPF._STA due to previous error (AE_NOT_FOUND) (20190703/psparse-529) [ 0.294411] ACPI: EC: interrupt unblocked [ 0.294426] ACPI: EC: event unblocked [ 0.294442] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6e, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.294443] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events [ 0.294775] SCSI subsystem initialized [ 0.294791] libata version 3.00 loaded. [ 0.294791] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.294791] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.294791] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.294791] vgaarb: loaded [ 0.294791] ACPI: bus type USB registered [ 0.294791] usbcore: registered new interface driver usbfs [ 0.294791] usbcore: registered new interface driver hub [ 0.294791] usbcore: registered new device driver usb [ 0.294791] pps_core: LinuxPPS API ver. 1 registered [ 0.294791] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.294791] PTP clock support registered [ 0.294791] EDAC MC: Ver: 3.0.0 [ 0.294791] Registered efivars operations [ 0.294791] PCI: Using ACPI for IRQ routing [ 0.313966] PCI: pci_cache_line_size set to 64 bytes [ 0.314147] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window [ 0.314314] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.314314] e820: reserve RAM buffer [mem 0x31113018-0x33ffffff] [ 0.314315] e820: reserve RAM buffer [mem 0x3111f018-0x33ffffff] [ 0.314316] e820: reserve RAM buffer [mem 0x3113d018-0x33ffffff] [ 0.314317] e820: reserve RAM buffer [mem 0x3114e018-0x33ffffff] [ 0.314318] e820: reserve RAM buffer [mem 0x311f4000-0x33ffffff] [ 0.314318] e820: reserve RAM buffer [mem 0x3390a000-0x33ffffff] [ 0.314319] e820: reserve RAM buffer [mem 0x33961000-0x33ffffff] [ 0.314319] e820: reserve RAM buffer [mem 0x42a2f000-0x43ffffff] [ 0.314320] e820: reserve RAM buffer [mem 0x46000000-0x47ffffff] [ 0.314320] e820: reserve RAM buffer [mem 0x2afc00000-0x2afffffff] [ 0.314389] NetLabel: Initializing [ 0.314389] NetLabel: domain hash size = 128 [ 0.314390] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.314400] NetLabel: unlabeled traffic allowed by default [ 0.314844] clocksource: Switched to clocksource tsc-early [ 0.321893] VFS: Disk quotas dquot_6.6.0 [ 0.321893] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.321893] *** VALIDATE hugetlbfs *** [ 0.321893] AppArmor: AppArmor Filesystem Enabled [ 0.321893] pnp: PnP ACPI init [ 0.322444] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.322445] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.322448] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.322502] pnp 00:01: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active) [ 0.322533] pnp 00:02: Plug and Play ACPI device, IDs SYN3282 SYN1e00 SYN0002 PNP0f13 (active) [ 0.323900] system 00:03: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.323901] system 00:03: [mem 0xfeda0000-0xfeda0fff] has been reserved [ 0.323901] system 00:03: [mem 0xfeda1000-0xfeda1fff] has been reserved [ 0.323902] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved [ 0.323903] system 00:03: [mem 0xfed20000-0xfed7ffff] could not be reserved [ 0.323904] system 00:03: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.323905] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.323907] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.325650] system 00:04: [io 0x1800-0x18fe] has been reserved [ 0.325651] system 00:04: [mem 0xfd000000-0xfd68ffff] has been reserved [ 0.325651] system 00:04: [mem 0xfd6b0000-0xfd6cffff] has been reserved [ 0.325652] system 00:04: [mem 0xfd6f0000-0xfdffffff] has been reserved [ 0.325653] system 00:04: [mem 0xfe000000-0xfe01ffff] has been reserved [ 0.325654] system 00:04: [mem 0xfe200000-0xfe7fffff] has been reserved [ 0.325655] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved [ 0.325657] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.325902] system 00:05: [io 0x2000-0x20fe] has been reserved [ 0.325904] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.326079] system 00:06: [mem 0xfe038000-0xfe038fff] has been reserved [ 0.326081] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.326906] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.IPPF._STA.POS1], AE_NOT_FOUND (20190703/psargs-330) [ 0.326911] No Local Variables are initialized for Method [_STA] [ 0.326911] No Arguments are initialized for method [_STA] [ 0.326912] ACPI Error: Aborting method \_SB.IPPF._STA due to previous error (AE_NOT_FOUND) (20190703/psparse-529) [ 0.326938] pnp: PnP ACPI: found 7 devices [ 0.327727] thermal_sys: Registered thermal governor 'fair_share' [ 0.327728] thermal_sys: Registered thermal governor 'bang_bang' [ 0.327728] thermal_sys: Registered thermal governor 'step_wise' [ 0.327729] thermal_sys: Registered thermal governor 'user_space' [ 0.327729] thermal_sys: Registered thermal governor 'power_allocator' [ 0.332416] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.332434] pci 0000:06:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window [ 0.332441] pci 0000:00:15.0: BAR 0: assigned [mem 0x4010000000-0x4010000fff 64bit] [ 0.332491] pci 0000:00:15.1: BAR 0: assigned [mem 0x4010001000-0x4010001fff 64bit] [ 0.332538] pci 0000:00:1e.0: BAR 0: assigned [mem 0x4010002000-0x4010002fff 64bit] [ 0.332586] pci 0000:00:1e.2: BAR 0: assigned [mem 0x4010003000-0x4010003fff 64bit] [ 0.332599] pci 0000:00:1f.5: BAR 0: no space for [mem size 0x00001000] [ 0.332600] pci 0000:00:1f.5: BAR 0: trying firmware assignment [mem 0xfe010000-0xfe010fff] [ 0.332601] pci 0000:00:1f.5: BAR 0: [mem 0xfe010000-0xfe010fff] conflicts with Reserved [mem 0xfc800000-0xfe7fffff] [ 0.332602] pci 0000:00:1f.5: BAR 0: failed to assign [mem size 0x00001000] [ 0.332603] pci 0000:00:1c.0: PCI bridge to [bus 01-05] [ 0.332609] pci 0000:00:1c.0: bridge window [io 0x7000-0x7fff] [ 0.332613] pci 0000:00:1c.0: bridge window [mem 0x55000000-0x55ffffff] [ 0.332616] pci 0000:00:1c.0: bridge window [mem 0x6012000000-0x6012ffffff 64bit pref] [ 0.332621] pci 0000:06:00.0: BAR 6: no space for [mem size 0x00080000 pref] [ 0.332622] pci 0000:06:00.0: BAR 6: failed to assign [mem size 0x00080000 pref] [ 0.332623] pci 0000:00:1c.4: PCI bridge to [bus 06-0a] [ 0.332624] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff] [ 0.332628] pci 0000:00:1c.4: bridge window [mem 0x54000000-0x54ffffff] [ 0.332630] pci 0000:00:1c.4: bridge window [mem 0x6000000000-0x6011ffffff 64bit pref] [ 0.332635] pci 0000:00:1d.0: PCI bridge to [bus 0b-0f] [ 0.332636] pci 0000:00:1d.0: bridge window [io 0x5000-0x5fff] [ 0.332640] pci 0000:00:1d.0: bridge window [mem 0x53000000-0x53ffffff] [ 0.332642] pci 0000:00:1d.0: bridge window [mem 0x6013000000-0x6013ffffff 64bit pref] [ 0.332647] pci 0000:00:1d.1: PCI bridge to [bus 10-14] [ 0.332649] pci 0000:00:1d.1: bridge window [io 0x4000-0x4fff] [ 0.332652] pci 0000:00:1d.1: bridge window [mem 0x52000000-0x52ffffff] [ 0.332655] pci 0000:00:1d.1: bridge window [mem 0x6014000000-0x6014ffffff 64bit pref] [ 0.332659] pci 0000:00:1d.4: PCI bridge to [bus 15] [ 0.332661] pci 0000:00:1d.4: bridge window [io 0x3000-0x3fff] [ 0.332665] pci 0000:00:1d.4: bridge window [mem 0x51000000-0x51ffffff] [ 0.332667] pci 0000:00:1d.4: bridge window [mem 0x6015000000-0x6015ffffff 64bit pref] [ 0.332673] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.332674] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.332674] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.332675] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.332675] pci_bus 0000:00: resource 7 [mem 0x50400000-0xbfffffff window] [ 0.332676] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window] [ 0.332677] pci_bus 0000:01: resource 0 [io 0x7000-0x7fff] [ 0.332677] pci_bus 0000:01: resource 1 [mem 0x55000000-0x55ffffff] [ 0.332678] pci_bus 0000:01: resource 2 [mem 0x6012000000-0x6012ffffff 64bit pref] [ 0.332679] pci_bus 0000:06: resource 0 [io 0x6000-0x6fff] [ 0.332679] pci_bus 0000:06: resource 1 [mem 0x54000000-0x54ffffff] [ 0.332680] pci_bus 0000:06: resource 2 [mem 0x6000000000-0x6011ffffff 64bit pref] [ 0.332681] pci_bus 0000:0b: resource 0 [io 0x5000-0x5fff] [ 0.332681] pci_bus 0000:0b: resource 1 [mem 0x53000000-0x53ffffff] [ 0.332682] pci_bus 0000:0b: resource 2 [mem 0x6013000000-0x6013ffffff 64bit pref] [ 0.332682] pci_bus 0000:10: resource 0 [io 0x4000-0x4fff] [ 0.332683] pci_bus 0000:10: resource 1 [mem 0x52000000-0x52ffffff] [ 0.332683] pci_bus 0000:10: resource 2 [mem 0x6014000000-0x6014ffffff 64bit pref] [ 0.332684] pci_bus 0000:15: resource 0 [io 0x3000-0x3fff] [ 0.332684] pci_bus 0000:15: resource 1 [mem 0x51000000-0x51ffffff] [ 0.332685] pci_bus 0000:15: resource 2 [mem 0x6015000000-0x6015ffffff 64bit pref] [ 0.332826] NET: Registered protocol family 2 [ 0.332938] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.332973] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.333081] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.333132] TCP: Hash tables configured (established 65536 bind 65536) [ 0.333163] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.333182] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.333243] NET: Registered protocol family 1 [ 0.333248] NET: Registered protocol family 44 [ 0.333257] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.335659] PCI: CLS 64 bytes, default 64 [ 0.335687] Trying to unpack rootfs image as initramfs... [ 0.412922] Initramfs unpacking failed: Decoding failed [ 0.417994] Freeing initrd memory: 50824K [ 0.434464] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.434466] software IO TLB: mapped [mem 0x3e092000-0x42092000] (64MB) [ 0.434652] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1128af0325d, max_idle_ns: 440795261011 ns [ 0.434666] clocksource: Switched to clocksource tsc [ 0.434689] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.434764] check: Scanning for low memory corruption every 60 seconds [ 0.436216] Initialise system trusted keyrings [ 0.436225] Key type blacklist registered [ 0.436294] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.437235] zbud: loaded [ 0.437547] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.437702] fuse: init (API version 7.31) [ 0.437804] Platform Keyring initialized [ 0.442221] Key type asymmetric registered [ 0.442225] Asymmetric key parser 'x509' registered [ 0.442253] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.442281] io scheduler mq-deadline registered [ 0.442493] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122 [ 0.442528] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 0.442845] pcieport 0000:00:1c.4: PME: Signaling with IRQ 123 [ 0.442957] pcieport 0000:00:1d.0: PME: Signaling with IRQ 124 [ 0.442973] pcieport 0000:00:1d.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 0.443203] pcieport 0000:00:1d.1: PME: Signaling with IRQ 125 [ 0.443401] pcieport 0000:00:1d.4: PME: Signaling with IRQ 126 [ 0.443473] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.443514] efifb: probing for efifb [ 0.443561] efifb: showing boot graphics [ 0.444550] efifb: framebuffer at 0x4000000000, using 8100k, total 8100k [ 0.444550] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.444551] efifb: scrolling: redraw [ 0.444551] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.444598] fbcon: Deferring console take-over [ 0.444599] fb0: EFI VGA frame buffer device [ 0.444605] intel_idle: does not run on family 6 model 126 [ 0.445435] ACPI: AC Adapter [ADP1] (off-line) [ 0.445479] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.445482] ACPI: Lid Switch [LID0] [ 0.445497] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.445502] ACPI: Power Button [PWRB] [ 0.445520] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.445528] ACPI: Power Button [PWRF] [ 0.445850] Monitor-Mwait will be used to enter C-1 state [ 0.445871] Monitor-Mwait will be used to enter C-2 state [ 0.445875] Monitor-Mwait will be used to enter C-3 state [ 0.449934] [Firmware Bug]: Invalid critical threshold (0) [ 0.456150] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.456151] ACPI: Thermal Zone [TZ01] (70 C) [ 0.456382] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.458842] hpet_acpi_add: no address or irqs in _CRS [ 0.458872] Linux agpgart interface v0.103 [ 0.468301] loop: module loaded [ 0.468422] libphy: Fixed MDIO Bus: probed [ 0.468422] tun: Universal TUN/TAP device driver, 1.6 [ 0.468437] PPP generic driver version 2.4.2 [ 0.468458] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.468459] ehci-pci: EHCI PCI platform driver [ 0.468466] ehci-platform: EHCI generic platform driver [ 0.468472] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.468473] ohci-pci: OHCI PCI platform driver [ 0.468478] ohci-platform: OHCI generic platform driver [ 0.468483] uhci_hcd: USB Universal Host Controller Interface driver [ 0.468634] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.468638] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.469717] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x110 quirks 0x0000000000009810 [ 0.469722] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.469884] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 0.469884] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.469885] usb usb1: Product: xHCI Host Controller [ 0.469886] usb usb1: Manufacturer: Linux 5.3.0-48-generic xhci-hcd [ 0.469886] usb usb1: SerialNumber: 0000:00:14.0 [ 0.469959] hub 1-0:1.0: USB hub found [ 0.469975] hub 1-0:1.0: 12 ports detected [ 0.470841] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.470842] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.470844] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed [ 0.470863] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03 [ 0.470864] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.470864] usb usb2: Product: xHCI Host Controller [ 0.470865] usb usb2: Manufacturer: Linux 5.3.0-48-generic xhci-hcd [ 0.470865] usb usb2: SerialNumber: 0000:00:14.0 [ 0.470928] hub 2-0:1.0: USB hub found [ 0.470939] hub 2-0:1.0: 6 ports detected [ 0.471379] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.475915] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.475917] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.476054] mousedev: PS/2 mouse device common for all mice [ 0.476204] rtc_cmos rtc_cmos: RTC can wake from S4 [ 0.476684] rtc_cmos rtc_cmos: registered as rtc0 [ 0.476691] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram [ 0.476694] i2c /dev entries driver [ 0.476718] device-mapper: uevent: version 1.0.3 [ 0.476747] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com [ 0.476755] platform eisa.0: Probing EISA bus 0 [ 0.476756] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.476757] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.476758] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.476758] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.476758] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.476759] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.476759] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.476760] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.476760] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.476761] platform eisa.0: EISA: Detected 0 cards [ 0.476763] intel_pstate: Intel P-state driver initializing [ 0.477404] intel_pstate: HWP enabled [ 0.477501] ledtrig-cpu: registered to indicate activity on CPUs [ 0.477503] EFI Variables Facility v0.08 2004-May-17 [ 0.515145] intel_pmc_core INT33A1:00: initialized [ 0.515412] NET: Registered protocol family 10 [ 0.521820] Segment Routing with IPv6 [ 0.521834] NET: Registered protocol family 17 [ 0.521868] Key type dns_resolver registered [ 0.522248] RAS: Correctable Errors collector initialized. [ 0.522275] microcode: sig=0x706e5, pf=0x80, revision=0x56 [ 0.522316] microcode: Microcode Update Driver: v2.2. [ 0.522322] sched_clock: Marking stable (515852550, 6461396)->(532538782, -10224836) [ 0.522404] registered taskstats version 1 [ 0.522441] Loading compiled-in X.509 certificates [ 0.523986] Loaded X.509 cert 'Build time autogenerated kernel key: eb6e821f4c35277e071a4ba806dc2f364ed3b3c9' [ 0.524035] zswap: loaded using pool lzo/zbud [ 0.528906] Key type big_key registered [ 0.528915] Key type trusted registered [ 0.532267] Key type encrypted registered [ 0.532286] AppArmor: AppArmor sha1 policy hashing enabled [ 0.534065] integrity: Loading X.509 certificate: UEFI:db [ 0.534092] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.534092] integrity: Loading X.509 certificate: UEFI:db [ 0.534110] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.534110] integrity: Loading X.509 certificate: UEFI:db [ 0.534121] integrity: Loaded X.509 cert 'HP Inc.: HP UEFI Secure Boot DB 2017: d9c01b50cfcae89d3b05345c163aa76e5dd589e7' [ 0.536140] ima: Allocated hash algorithm: sha1 [ 0.536573] ima: Error Communicating to TPM chip [ 0.537000] ima: Error Communicating to TPM chip [ 0.537425] ima: Error Communicating to TPM chip [ 0.537850] ima: Error Communicating to TPM chip [ 0.538276] ima: Error Communicating to TPM chip [ 0.538702] ima: Error Communicating to TPM chip [ 0.539128] ima: Error Communicating to TPM chip [ 0.539553] ima: Error Communicating to TPM chip [ 0.542054] No architecture policies found [ 0.542064] evm: Initialising EVM extended attributes: [ 0.542065] evm: security.selinux [ 0.542065] evm: security.SMACK64 [ 0.542065] evm: security.SMACK64EXEC [ 0.542066] evm: security.SMACK64TRANSMUTE [ 0.542066] evm: security.SMACK64MMAP [ 0.542066] evm: security.apparmor [ 0.542066] evm: security.ima [ 0.542067] evm: security.capability [ 0.542067] evm: HMAC attrs: 0x1 [ 0.543354] PM: Magic number: 0:423:551 [ 0.543364] tty ttyS27: hash matches [ 0.543370] pcie_pme 0000:00:1c.0:pcie001: hash matches [ 0.543373] clockevents clockevent2: hash matches [ 0.543620] rtc_cmos rtc_cmos: setting system clock to 2020-04-23T21:32:13 UTC (1587677533) [ 0.543817] Lockdown: swapper/0: Hibernation is restricted; see man kernel_lockdown.7 [ 0.553808] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.561436] battery: ACPI: Battery Slot [BAT0] (battery present) [ 0.566921] Freeing unused decrypted memory: 2040K [ 0.567311] Freeing unused kernel image memory: 2676K [ 0.578540] Write protecting the kernel read-only data: 22528k [ 0.579295] Freeing unused kernel image memory: 2008K [ 0.579592] Freeing unused kernel image memory: 1416K [ 0.584585] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.584587] Run /init as init process [ 0.630840] wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found [ 0.630842] wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found [ 0.630844] wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found [ 0.630845] wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found [ 0.631142] acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:03) [ 0.631274] acpi PNP0C14:05: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:03) [ 0.631294] wmi_bus wmi_bus-PNP0C14:05: WQBJ data block query control method not found [ 0.631296] wmi_bus wmi_bus-PNP0C14:05: WQBK data block query control method not found [ 0.648099] ahci 0000:00:17.0: version 3.0 [ 0.648730] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x1 impl RAID mode [ 0.648734] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds apst [ 0.649091] r8169 0000:10:00.0: can't disable ASPM; OS doesn't have ASPM control [ 0.649899] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 0.649965] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 0.651521] nvme nvme0: pci function 0000:15:00.0 [ 0.653114] scsi host0: ahci [ 0.660750] libphy: r8169: probed [ 0.661059] r8169 0000:10:00.0 eth0: RTL8168h/8111h, 04:0e:3c:a0:76:5e, XID 541, IRQ 130 [ 0.661062] r8169 0000:10:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 0.662418] scsi host1: ahci [ 0.662425] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006) [ 0.662487] ata1: SATA max UDMA/133 abar m2048@0x56013000 port 0x56013100 irq 128 [ 0.662488] ata2: DUMMY [ 0.666253] r8169 0000:10:00.0 eno1: renamed from eth0 [ 0.669936] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.IPPF._STA.POS1], AE_NOT_FOUND (20190703/psargs-330) [ 0.669942] No Local Variables are initialized for Method [_STA] [ 0.669943] No Arguments are initialized for method [_STA] [ 0.669944] ACPI Error: Aborting method \_SB.IPPF._STA due to previous error (AE_NOT_FOUND) (20190703/psparse-529) [ 0.694582] intel-lpss 0000:00:15.1: enabling device (0004 -> 0006) [ 0.699831] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.IPPF._STA.POS1], AE_NOT_FOUND (20190703/psargs-330) [ 0.699837] No Local Variables are initialized for Method [_STA] [ 0.699838] No Arguments are initialized for method [_STA] [ 0.699839] ACPI Error: Aborting method \_SB.IPPF._STA due to previous error (AE_NOT_FOUND) (20190703/psparse-529) [ 0.722487] intel-lpss 0000:00:1e.0: enabling device (0004 -> 0006) [ 0.742681] intel-lpss 0000:00:1e.2: enabling device (0004 -> 0006) [ 0.814517] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 0.847266] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 4.01 [ 0.847267] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 0.847268] usb 1-1: Product: USB2.0 Hub [ 0.847268] usb 1-1: Manufacturer: GenesysLogic [ 0.849109] hub 1-1:1.0: USB hub found [ 0.850344] hub 1-1:1.0: 4 ports detected [ 0.868939] nvme nvme0: 8/0/0 default/read/poll queues [ 0.869892] nvme0n1: p1 p2 p3 p4 p5 [ 0.966948] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 0.978763] ata1: SATA link down (SStatus 4 SControl 300) [ 0.990335] usb 2-1: New USB device found, idVendor=05e3, idProduct=0616, bcdDevice= 4.01 [ 0.990337] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 0.990337] usb 2-1: Product: USB3.0 Hub [ 0.990338] usb 2-1: Manufacturer: GenesysLogic [ 0.991441] hub 2-1:1.0: USB hub found [ 0.991817] hub 2-1:1.0: 4 ports detected [ 1.114474] usb 1-2: new full-speed USB device number 3 using xhci_hcd [ 1.265801] usb 1-2: New USB device found, idVendor=25a7, idProduct=fa23, bcdDevice= 2.41 [ 1.265802] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.265803] usb 1-2: Product: 2.4G Receiver [ 1.265803] usb 1-2: Manufacturer: Compx [ 1.342538] usb 1-1.4: new high-speed USB device number 4 using xhci_hcd [ 1.363213] usb 1-1.4: New USB device found, idVendor=03f0, idProduct=af11, bcdDevice= 1.00 [ 1.363214] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.363215] usb 1-1.4: Product: Photosmart 6520 series [ 1.363216] usb 1-1.4: Manufacturer: HP [ 1.363216] usb 1-1.4: SerialNumber: TH42O5701T05XP [ 1.455325] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4762] [ 1.488724] psmouse serio1: synaptics: queried min coordinates: x [1306..], y [1156..] [ 1.488728] psmouse serio1: synaptics: Your touchpad (PNP: SYN3282 SYN1e00 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org. [ 1.490501] usb 1-3: new high-speed USB device number 5 using xhci_hcd [ 1.520696] usb 1-3: New USB device found, idVendor=05c8, idProduct=03bc, bcdDevice= 0.03 [ 1.520698] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.520698] usb 1-3: Product: HP Wide Vision HD Camera [ 1.520699] usb 1-3: Manufacturer: SunplusIT Inc [ 1.556407] psmouse serio1: synaptics: Touchpad model: 1, fw: 10.16, id: 0x1e2a1, caps: 0xf00123/0x840300/0x12e800/0x500000, board id: 3408, fw id: 2732864 [ 1.598657] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 1.650558] usb 1-10: new full-speed USB device number 6 using xhci_hcd [ 1.800632] usb 1-10: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02 [ 1.800633] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.806196] hidraw: raw HID events driver (C) Jiri Kosina [ 1.807658] usb-storage 1-1.4:1.2: USB Mass Storage device detected [ 1.807731] scsi host2: usb-storage 1-1.4:1.2 [ 1.807790] usbcore: registered new interface driver usb-storage [ 1.808417] usbcore: registered new interface driver uas [ 1.810561] usbcore: registered new interface driver usbhid [ 1.810561] usbhid: USB HID core driver [ 1.811671] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:25A7:FA23.0001/input/input6 [ 1.870900] hid-generic 0003:25A7:FA23.0001: input,hidraw0: USB HID v1.10 Keyboard [Compx 2.4G Receiver] on usb-0000:00:14.0-2/input0 [ 1.871048] input: Compx 2.4G Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:25A7:FA23.0002/input/input7 [ 1.871385] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:25A7:FA23.0002/input/input8 [ 1.871589] input: Compx 2.4G Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:25A7:FA23.0002/input/input9 [ 1.930691] input: Compx 2.4G Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:25A7:FA23.0002/input/input10 [ 1.930993] hid-generic 0003:25A7:FA23.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Compx 2.4G Receiver] on usb-0000:00:14.0-2/input1 [ 1.965032] fbcon: Taking over console [ 1.965073] Console: switching to colour frame buffer device 240x67 [ 1.970245] EXT4-fs (nvme0n1p5): mounted filesystem with ordered data mode. Opts: (null) [ 2.056116] systemd[1]: Inserted module 'autofs4' [ 2.156667] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 2.174681] systemd[1]: Detected architecture x86-64. [ 2.176659] systemd[1]: Set hostname to . [ 2.177137] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument [ 2.177178] Lockdown: systemd: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7 [ 2.238751] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. [ 2.262574] systemd[1]: /lib/systemd/system/virtlockd.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlockd-sock → /run/libvirt/virtlockd-sock; please update the unit file accordingly. [ 2.263124] systemd[1]: /lib/systemd/system/virtlockd-admin.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlockd-admin-sock → /run/libvirt/virtlockd-admin-sock; please update the unit file accordingly. [ 2.263414] systemd[1]: /lib/systemd/system/virtlogd.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlogd-sock → /run/libvirt/virtlogd-sock; please update the unit file accordingly. [ 2.263970] systemd[1]: /lib/systemd/system/virtlogd-admin.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlogd-admin-sock → /run/libvirt/virtlogd-admin-sock; please update the unit file accordingly. [ 2.280942] systemd[1]: Listening on fsck to fsckd communication Socket. [ 2.288662] EXT4-fs (nvme0n1p5): re-mounted. Opts: errors=remount-ro [ 2.296272] lp: driver loaded but no devices found [ 2.305621] ppdev: user-space parallel port driver [ 2.390508] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS [ 2.523383] input: HP Wireless hotkeys as /devices/virtual/input/input12 [ 2.524805] hp_accel: laptop model unknown, using default axes configuration [ 2.533352] lis3lv02d: 8 bits 3DC sensor found [ 2.559402] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input13 [ 2.582744] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 2.588414] IPMI message handler: version 39.2 [ 2.590058] ipmi device interface [ 2.602874] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 2.627139] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 2.638673] mc: Linux media interface: v0.10 [ 2.653619] dw-apb-uart.2: ttyS4 at MMIO 0x4010002000 (irq = 20, base_baud = 7500000) is a 16550A [ 2.653923] videodev: Linux video capture interface: v2.00 [ 2.654142] idma64 idma64.2: Found Intel integrated DMA 64-bit [ 2.656463] Bluetooth: Core ver 2.22 [ 2.656511] NET: Registered protocol family 31 [ 2.656512] Bluetooth: HCI device and connection manager initialized [ 2.656523] Bluetooth: HCI socket layer initialized [ 2.656528] Bluetooth: L2CAP socket layer initialized [ 2.656534] Bluetooth: SCO socket layer initialized [ 2.663079] idma64 idma64.3: Found Intel integrated DMA 64-bit [ 2.670048] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.676970] usbcore: registered new interface driver btusb [ 2.677439] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer [ 2.677442] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 2.677442] RAPL PMU: hw unit of domain package 2^-14 Joules [ 2.677443] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 2.678239] Bluetooth: hci0: Firmware revision 0.0 build 96 week 45 2019 [ 2.682065] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.IPPF._STA.POS1], AE_NOT_FOUND (20190703/psargs-330) [ 2.682094] No Local Variables are initialized for Method [_STA] [ 2.682095] No Arguments are initialized for method [_STA] [ 2.682097] ACPI Error: Aborting method \_SB.IPPF._STA due to previous error (AE_NOT_FOUND) (20190703/psparse-529) [ 2.682328] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.733814] Intel(R) Wireless WiFi driver for Linux [ 2.733816] Copyright(c) 2003- 2015 Intel Corporation [ 2.749196] uvcvideo: Found UVC 1.00 device HP Wide Vision HD Camera (05c8:03bc) [ 2.751856] cryptd: max_cpu_qlen set to 1000 [ 2.752083] checking generic (4000000000 7e9000) vs hw (4000000000 10000000) [ 2.752087] fb0: switching to inteldrmfb from EFI VGA [ 2.752709] Console: switching to colour dummy device 80x25 [ 2.752778] i915 0000:00:02.0: vgaarb: deactivate vga console [ 2.760901] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.760904] [drm] Driver supports precise vblank timestamp query. [ 2.763601] systemd-journald[368]: Received request to flush runtime journal from PID 1 [ 2.764269] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.766141] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 43.2.23.17 [ 2.766877] [drm] Finished loading DMC firmware i915/icl_dmc_ver1_07.bin (v1.7) [ 2.767161] iwlwifi 0000:00:14.3: loaded firmware version 48.4fa0041f.0 op_mode iwlmvm [ 2.774875] AVX2 version of gcm_enc/dec engaged. [ 2.774877] AES CTR mode by8 optimization enabled [ 2.775436] uvcvideo 1-3:1.0: Entity type for entity Extension 4 was not initialized! [ 2.775438] uvcvideo 1-3:1.0: Entity type for entity Extension 3 was not initialized! [ 2.775440] uvcvideo 1-3:1.0: Entity type for entity Processing 2 was not initialized! [ 2.775441] uvcvideo 1-3:1.0: Entity type for entity Camera 1 was not initialized! [ 2.775545] input: HP Wide Vision HD Camera: HP Wi as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input15 [ 2.775926] usbcore: registered new interface driver uvcvideo [ 2.775928] USB Video Class driver (1.1.1) [ 2.805251] [drm:_wa_add [i915]] *ERROR* Discarding overwritten w/a for reg 7034 (mask: ffffffff, value: 80000280) [ 2.945558] scsi 2:0:0:0: Direct-Access HP Photosmart 6520 1.00 PQ: 0 ANSI: 5 [ 2.946005] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 2.947036] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 2.947935] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0 [ 3.033105] Lockdown: systemd-udevd: Loading of module with unavailable key is restricted; see man kernel_lockdown.7 [ 3.037370] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.038669] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16 [ 3.038976] [Firmware Bug]: ACPI(PXSX) defines _DOD but not _DOS [ 3.038997] ACPI: Video Device [PXSX] (multi-head: yes rom: yes post: no) [ 3.039038] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:44/LNXVIDEO:01/input/input17 [ 3.040575] fbcon: i915drmfb (fb0) is primary device [ 3.040657] Console: switching to colour frame buffer device 240x67 [ 3.040686] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 3.044506] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [ 3.051658] iwlwifi 0000:00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x338 [ 3.084672] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 3.085096] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 3.180589] usblp 1-1.4:1.1: usblp1: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x03F0 pid 0xAF11 [ 3.180670] usbcore: registered new interface driver usblp [ 3.192967] iwlwifi 0000:00:14.3: base HW address: 28:7f:cf:9e:22:c1 [ 3.205216] thermal thermal_zone4: failed to read out thermal zone (-61) [ 3.210555] iwlwifi 0000:00:14.3 wlo1: renamed from wlan0 [ 3.381318] intel_rapl_common: Found RAPL domain package [ 3.381320] intel_rapl_common: Found RAPL domain core [ 3.381321] intel_rapl_common: Found RAPL domain uncore [ 3.522998] audit: type=1400 audit(1587677536.475:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=800 comm="apparmor_parser" [ 3.523004] audit: type=1400 audit(1587677536.475:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=800 comm="apparmor_parser" [ 3.523913] audit: type=1400 audit(1587677536.475:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=797 comm="apparmor_parser" [ 3.523983] audit: type=1400 audit(1587677536.475:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=795 comm="apparmor_parser" [ 3.526267] audit: type=1400 audit(1587677536.475:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=798 comm="apparmor_parser" [ 3.526272] audit: type=1400 audit(1587677536.475:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=798 comm="apparmor_parser" [ 3.526275] audit: type=1400 audit(1587677536.475:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=798 comm="apparmor_parser" [ 3.527698] audit: type=1400 audit(1587677536.479:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=804 comm="apparmor_parser" [ 3.529376] audit: type=1400 audit(1587677536.479:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirtd" pid=807 comm="apparmor_parser" [ 3.577712] input: HP WMI hotkeys as /devices/virtual/input/input14 [ 4.764720] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC295: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 4.764721] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.764722] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 4.764722] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 4.764723] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 4.764724] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19 [ 4.764724] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 4.823572] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18 [ 4.823623] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19 [ 4.824366] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20 [ 4.824400] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21 [ 4.824432] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22 [ 4.824460] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23 [ 4.824512] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24 [ 4.824564] input: HDA Intel PCH HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25 [ 4.824612] input: HDA Intel PCH HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26 [ 5.115250] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.115252] Bluetooth: BNEP filters: protocol multicast [ 5.115257] Bluetooth: BNEP socket layer initialized [ 5.515738] Generic Realtek PHY r8169-1000:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-1000:00, irq=IGNORE) [ 5.635766] r8169 0000:10:00.0 eno1: Link is Down [ 5.786593] iwlwifi 0000:00:14.3: BIOS contains WGDS but no WRDS [ 6.073800] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 6.075360] virbr0: port 1(virbr0-nic) entered blocking state [ 6.075362] virbr0: port 1(virbr0-nic) entered disabled state [ 6.075469] device virbr0-nic entered promiscuous mode [ 6.089493] bpfilter: Loaded bpfilter_umh pid 1134 [ 6.295739] virbr0: port 1(virbr0-nic) entered blocking state [ 6.295741] virbr0: port 1(virbr0-nic) entered listening state [ 6.329947] virbr0: port 1(virbr0-nic) entered disabled state [ 7.976931] rfkill: input handler disabled [ 9.297218] wlo1: authenticate with 84:94:8c:ab:fc:c8 [ 9.301174] wlo1: send auth to 84:94:8c:ab:fc:c8 (try 1/3) [ 9.325539] wlo1: authenticated [ 9.326422] wlo1: associate with 84:94:8c:ab:fc:c8 (try 1/3) [ 9.341518] wlo1: RX AssocResp from 84:94:8c:ab:fc:c8 (capab=0xc31 status=0 aid=2) [ 9.345429] wlo1: associated [ 9.652737] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 10.245718] usblp1: removed [ 10.247009] usblp 1-1.4:1.1: usblp1: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x03F0 pid 0xAF11 [ 16.526927] Bluetooth: RFCOMM TTY layer initialized [ 16.526939] Bluetooth: RFCOMM socket layer initialized [ 16.526942] Bluetooth: RFCOMM ver 1.11 [ 16.606588] rfkill: input handler enabled [ 18.560359] rfkill: input handler disabled [ 80.064297] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x0000000FF) is beyond end of object (length 0x10) (20190703/exoparg2-393) [ 80.064316] No Local Variables are initialized for Method [GINF] [ 80.064316] Initialized Arguments for Method [GINF]: (2 arguments defined for method invocation) [ 80.064317] Arg0: 00000000775f414b Integer 00000000000000FF [ 80.064320] Arg1: 0000000034cb492f Integer 0000000000000000 [ 80.064323] ACPI Error: Aborting method \_SB.GINF due to previous error (AE_AML_PACKAGE_LIMIT) (20190703/psparse-529) [ 80.064327] ACPI Error: Aborting method \_SB.GADR due to previous error (AE_AML_PACKAGE_LIMIT) (20190703/psparse-529) [ 80.064329] ACPI Error: Aborting method \_SB.SGOV due to previous error (AE_AML_PACKAGE_LIMIT) (20190703/psparse-529) [ 80.064332] ACPI Error: Aborting method \_SB.CGWR due to previous error (AE_AML_PACKAGE_LIMIT) (20190703/psparse-529) [ 80.064335] ACPI Error: Aborting method \_SB.TBFP due to previous error (AE_AML_PACKAGE_LIMIT) (20190703/psparse-529) [ 80.064337] ACPI Error: Aborting method \_SB.WMTF.WMTF due to previous error (AE_AML_PACKAGE_LIMIT) (20190703/psparse-529) [ 80.070179] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x0000000FF) is beyond end of object (length 0x10) (20190703/exoparg2-393) [ 80.070199] No Local Variables are initialized for Method [GINF] [ 80.070200] Initialized Arguments for Method [GINF]: (2 arguments defined for method invocation) [ 80.070201] Arg0: 00000000768238e5 Integer 00000000000000FF [ 80.070205] Arg1: 00000000b31ca6de Integer 0000000000000000 [ 80.070209] ACPI Error: Aborting method \_SB.GINF due to previous error (AE_AML_PACKAGE_LIMIT) (20190703/psparse-529) [ 80.070213] ACPI Error: Aborting method \_SB.GADR due to previous error (AE_AML_PACKAGE_LIMIT) (20190703/psparse-529) [ 80.070216] ACPI Error: Aborting method \_SB.SGOV due to previous error (AE_AML_PACKAGE_LIMIT) (20190703/psparse-529) [ 80.070228] ACPI Error: Aborting method \_SB.CGWR due to previous error (AE_AML_PACKAGE_LIMIT) (20190703/psparse-529) [ 80.070231] ACPI Error: Aborting method \_SB.TBFP due to previous error (AE_AML_PACKAGE_LIMIT) (20190703/psparse-529) [ 80.070235] ACPI Error: Aborting method \_SB.WMTF.WMTF due to previous error (AE_AML_PACKAGE_LIMIT) (20190703/psparse-529) [ 2821.395810] PM: suspend entry (deep) [ 2821.402935] Filesystems sync: 0.007 seconds [ 2821.404051] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 2821.406489] OOM killer disabled. [ 2821.406490] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 2821.407874] printk: Suspending console(s) (use no_console_suspend to debug) [ 2821.447210] wlo1: deauthenticating from 84:94:8c:ab:fc:c8 by local choice (Reason: 3=DEAUTH_LEAVING) [ 2821.676181] ACPI: EC: interrupt blocked [ 2821.792033] ACPI: Preparing to enter system sleep state S3 [ 2821.797821] ACPI: EC: event blocked [ 2821.797821] ACPI: EC: EC stopped [ 2821.797822] PM: Saving platform NVS memory [ 2821.797935] Disabling non-boot CPUs ... [ 2821.798462] IRQ 128: no longer affine to CPU1 [ 2821.799488] smpboot: CPU 1 is now offline [ 2821.802132] IRQ 143: no longer affine to CPU2 [ 2821.802139] IRQ 145: no longer affine to CPU2 [ 2821.802145] IRQ 149: no longer affine to CPU2 [ 2821.803196] smpboot: CPU 2 is now offline [ 2821.807082] IRQ 146: no longer affine to CPU3 [ 2821.808098] smpboot: CPU 3 is now offline [ 2821.812003] IRQ 150: no longer affine to CPU4 [ 2821.813561] smpboot: CPU 4 is now offline [ 2821.816524] IRQ 17: no longer affine to CPU5 [ 2821.816546] IRQ 124: no longer affine to CPU5 [ 2821.816557] IRQ 140: no longer affine to CPU5 [ 2821.816566] IRQ 142: no longer affine to CPU5 [ 2821.817600] smpboot: CPU 5 is now offline [ 2821.821383] smpboot: CPU 6 is now offline [ 2821.824882] smpboot: CPU 7 is now offline [ 2821.828915] ACPI: Low-level resume complete [ 2821.829011] ACPI: EC: EC started [ 2821.829012] PM: Restoring platform NVS memory [ 2821.829916] Enabling non-boot CPUs ... [ 2821.829956] x86: Booting SMP configuration: [ 2821.829957] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 2821.830822] CPU1 is up [ 2821.830855] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 2821.831800] CPU2 is up [ 2821.831835] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 2821.832798] CPU3 is up [ 2821.832834] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 2821.833802] CPU4 is up [ 2821.833833] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 2821.834732] CPU5 is up [ 2821.834764] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 2821.835744] CPU6 is up [ 2821.835783] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 2821.836802] CPU7 is up [ 2821.839619] ACPI: Waking up from system sleep state S3 [ 2821.909035] ACPI: EC: interrupt unblocked [ 2821.957522] pci 0000:06:00.0: Enabling HDA controller [ 2821.959461] ACPI: EC: event unblocked [ 2822.079810] nvme nvme0: 8/0/0 default/read/poll queues [ 2822.114887] iwlwifi 0000:00:14.3: BIOS contains WGDS but no WRDS [ 2822.253607] usb 1-3: reset high-speed USB device number 5 using xhci_hcd [ 2822.273350] ata1: SATA link down (SStatus 4 SControl 300) [ 2822.401801] usb 1-2: reset full-speed USB device number 3 using xhci_hcd [ 2822.677491] usb 1-1: reset high-speed USB device number 2 using xhci_hcd [ 2822.891522] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4762] [ 2822.926031] psmouse serio1: synaptics: queried min coordinates: x [1306..], y [1156..] [ 2823.473900] usb 1-1.4: reset high-speed USB device number 4 using xhci_hcd [ 2823.495201] usblp1: removed [ 2825.168924] acpi LNXPOWER:06: Turning OFF [ 2825.169996] acpi LNXPOWER:05: Turning OFF [ 2825.170917] acpi LNXPOWER:04: Turning OFF [ 2825.170974] OOM killer enabled. [ 2825.170975] Restarting tasks ... done. [ 2825.178246] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [ 2825.189882] usb 2-1: USB disconnect, device number 2 [ 2825.190044] usblp 1-1.4:1.1: usblp1: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x03F0 pid 0xAF11 [ 2825.283591] PM: suspend exit [ 2825.334128] Generic Realtek PHY r8169-1000:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-1000:00, irq=IGNORE) [ 2825.438395] r8169 0000:10:00.0 eno1: Link is Down [ 2829.114459] wlo1: authenticate with 84:94:8c:ab:fc:c8 [ 2829.115912] wlo1: send auth to 84:94:8c:ab:fc:c8 (try 1/3) [ 2829.149957] wlo1: authenticated [ 2829.153031] wlo1: associate with 84:94:8c:ab:fc:c8 (try 1/3) [ 2829.167996] wlo1: RX AssocResp from 84:94:8c:ab:fc:c8 (capab=0xc31 status=0 aid=2) [ 2829.170506] wlo1: associated [ 2829.409928] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 3240.989625] PM: suspend entry (deep) [ 3240.997594] Filesystems sync: 0.007 seconds [ 3240.998062] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 3241.000066] OOM killer disabled. [ 3241.000066] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 3241.001344] printk: Suspending console(s) (use no_console_suspend to debug) [ 3241.042306] wlo1: deauthenticating from 84:94:8c:ab:fc:c8 by local choice (Reason: 3=DEAUTH_LEAVING) [ 3241.251637] ACPI: EC: interrupt blocked [ 3241.367013] ACPI: Preparing to enter system sleep state S3 [ 3241.372259] ACPI: EC: event blocked [ 3241.372259] ACPI: EC: EC stopped [ 3241.372260] PM: Saving platform NVS memory [ 3241.372444] Disabling non-boot CPUs ... [ 3241.373207] irq_migrate_all_off_this_cpu: 9 callbacks suppressed [ 3241.373209] IRQ 128: no longer affine to CPU1 [ 3241.374243] smpboot: CPU 1 is now offline [ 3241.377659] smpboot: CPU 2 is now offline [ 3241.381089] smpboot: CPU 3 is now offline [ 3241.383383] IRQ 150: no longer affine to CPU4 [ 3241.385008] smpboot: CPU 4 is now offline [ 3241.387255] IRQ 17: no longer affine to CPU5 [ 3241.387270] IRQ 124: no longer affine to CPU5 [ 3241.388332] smpboot: CPU 5 is now offline [ 3241.390469] IRQ 16: no longer affine to CPU6 [ 3241.390490] IRQ 122: no longer affine to CPU6 [ 3241.390514] IRQ 141: no longer affine to CPU6 [ 3241.390522] IRQ 142: no longer affine to CPU6 [ 3241.390531] IRQ 144: no longer affine to CPU6 [ 3241.391577] smpboot: CPU 6 is now offline [ 3241.394064] IRQ 123: no longer affine to CPU7 [ 3241.395190] smpboot: CPU 7 is now offline [ 3241.399328] ACPI: Low-level resume complete [ 3241.399424] ACPI: EC: EC started [ 3241.399424] PM: Restoring platform NVS memory [ 3241.400331] Enabling non-boot CPUs ... [ 3241.400370] x86: Booting SMP configuration: [ 3241.400371] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 3241.401288] CPU1 is up [ 3241.401340] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 3241.402319] CPU2 is up [ 3241.402358] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 3241.403336] CPU3 is up [ 3241.403375] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 3241.404466] CPU4 is up [ 3241.404493] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 3241.405328] CPU5 is up [ 3241.405363] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 3241.406335] CPU6 is up [ 3241.406373] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 3241.407387] CPU7 is up [ 3241.410210] ACPI: Waking up from system sleep state S3 [ 3241.478933] ACPI: EC: interrupt unblocked [ 3241.529063] pci 0000:06:00.0: Enabling HDA controller [ 3241.531276] ACPI: EC: event unblocked [ 3241.652762] nvme nvme0: 8/0/0 default/read/poll queues [ 3241.685060] iwlwifi 0000:00:14.3: BIOS contains WGDS but no WRDS [ 3241.824980] usb 1-1: reset high-speed USB device number 2 using xhci_hcd [ 3241.844701] ata1: SATA link down (SStatus 4 SControl 300) [ 3241.977204] usb 1-3: reset high-speed USB device number 5 using xhci_hcd [ 3242.125031] usb 1-2: reset full-speed USB device number 3 using xhci_hcd [ 3242.467676] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4762] [ 3242.501180] psmouse serio1: synaptics: queried min coordinates: x [1306..], y [1156..] [ 3242.621315] usb 1-1.4: reset high-speed USB device number 4 using xhci_hcd [ 3242.642403] usblp1: removed [ 3242.643624] acpi LNXPOWER:06: Turning OFF [ 3242.644438] acpi LNXPOWER:05: Turning OFF [ 3242.645192] acpi LNXPOWER:04: Turning OFF [ 3242.645262] OOM killer enabled. [ 3242.645263] Restarting tasks ... [ 3242.650974] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [ 3242.651132] done. [ 3242.657548] usblp 1-1.4:1.1: usblp1: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x03F0 pid 0xAF11 [ 3242.742623] PM: suspend exit [ 3242.780153] Generic Realtek PHY r8169-1000:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-1000:00, irq=IGNORE) [ 3242.889709] r8169 0000:10:00.0 eno1: Link is Down [ 3246.542760] wlo1: authenticate with 84:94:8c:ab:fc:c8 [ 3246.544191] wlo1: send auth to 84:94:8c:ab:fc:c8 (try 1/3) [ 3246.585318] wlo1: authenticated [ 3246.588396] wlo1: associate with 84:94:8c:ab:fc:c8 (try 1/3) [ 3246.602961] wlo1: RX AssocResp from 84:94:8c:ab:fc:c8 (capab=0xc31 status=0 aid=2) [ 3246.605571] wlo1: associated [ 3246.837993] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 3440.986999] PM: suspend entry (deep) [ 3440.995272] Filesystems sync: 0.008 seconds [ 3440.995691] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 3440.997661] OOM killer disabled. [ 3440.997661] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 3440.998837] printk: Suspending console(s) (use no_console_suspend to debug) [ 3441.079744] wlo1: deauthenticating from 84:94:8c:ab:fc:c8 by local choice (Reason: 3=DEAUTH_LEAVING) [ 3441.296852] ACPI: EC: interrupt blocked [ 3441.412297] ACPI: Preparing to enter system sleep state S3 [ 3441.417885] ACPI: EC: event blocked [ 3441.417886] ACPI: EC: EC stopped [ 3441.417887] PM: Saving platform NVS memory [ 3441.418064] Disabling non-boot CPUs ... [ 3441.418801] irq_migrate_all_off_this_cpu: 9 callbacks suppressed [ 3441.418803] IRQ 128: no longer affine to CPU1 [ 3441.419827] smpboot: CPU 1 is now offline [ 3441.423537] smpboot: CPU 2 is now offline [ 3441.426663] smpboot: CPU 3 is now offline [ 3441.428763] IRQ 150: no longer affine to CPU4 [ 3441.430374] smpboot: CPU 4 is now offline [ 3441.432420] IRQ 124: no longer affine to CPU5 [ 3441.432430] IRQ 125: no longer affine to CPU5 [ 3441.432449] IRQ 142: no longer affine to CPU5 [ 3441.433484] smpboot: CPU 5 is now offline [ 3441.435407] IRQ 16: no longer affine to CPU6 [ 3441.435421] IRQ 122: no longer affine to CPU6 [ 3441.435440] IRQ 141: no longer affine to CPU6 [ 3441.435453] IRQ 143: no longer affine to CPU6 [ 3441.435462] IRQ 144: no longer affine to CPU6 [ 3441.436527] smpboot: CPU 6 is now offline [ 3441.439725] smpboot: CPU 7 is now offline [ 3441.443626] ACPI: Low-level resume complete [ 3441.443723] ACPI: EC: EC started [ 3441.443723] PM: Restoring platform NVS memory [ 3441.444631] Enabling non-boot CPUs ... [ 3441.444671] x86: Booting SMP configuration: [ 3441.444671] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 3441.445555] CPU1 is up [ 3441.445588] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 3441.446550] CPU2 is up [ 3441.446579] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 3441.447523] CPU3 is up [ 3441.447561] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 3441.448670] CPU4 is up [ 3441.448701] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 3441.449594] CPU5 is up [ 3441.449631] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 3441.450666] CPU6 is up [ 3441.450701] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 3441.451749] CPU7 is up [ 3441.454590] ACPI: Waking up from system sleep state S3 [ 3441.523497] ACPI: EC: interrupt unblocked [ 3441.574433] pci 0000:06:00.0: Enabling HDA controller [ 3441.576704] ACPI: EC: event unblocked [ 3441.694864] nvme nvme0: 8/0/0 default/read/poll queues [ 3441.726840] iwlwifi 0000:00:14.3: BIOS contains WGDS but no WRDS [ 3441.870473] usb 1-3: reset high-speed USB device number 5 using xhci_hcd [ 3441.894485] ata1: SATA link down (SStatus 4 SControl 300) [ 3442.018616] usb 1-1: reset high-speed USB device number 2 using xhci_hcd [ 3442.170426] usb 1-2: reset full-speed USB device number 3 using xhci_hcd [ 3442.507006] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4762] [ 3442.541931] psmouse serio1: synaptics: queried min coordinates: x [1306..], y [1156..] [ 3442.814676] usb 1-1.4: reset high-speed USB device number 4 using xhci_hcd [ 3442.835730] usblp1: removed [ 3442.836838] acpi LNXPOWER:06: Turning OFF [ 3442.837785] acpi LNXPOWER:05: Turning OFF [ 3442.838664] acpi LNXPOWER:04: Turning OFF [ 3442.838745] OOM killer enabled. [ 3442.838747] Restarting tasks ... done. [ 3442.849216] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [ 3442.855596] usblp 1-1.4:1.1: usblp1: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x03F0 pid 0xAF11 [ 3442.936650] PM: suspend exit [ 3442.959796] Generic Realtek PHY r8169-1000:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-1000:00, irq=IGNORE) [ 3443.063173] r8169 0000:10:00.0 eno1: Link is Down [ 3443.325809] iwlwifi 0000:00:14.3: BIOS contains WGDS but no WRDS [ 3446.874637] wlo1: authenticate with 84:94:8c:ab:fc:c8 [ 3446.877295] wlo1: send auth to 84:94:8c:ab:fc:c8 (try 1/3) [ 3446.902189] wlo1: authenticated [ 3446.905813] wlo1: associate with 84:94:8c:ab:fc:c8 (try 1/3) [ 3446.920424] wlo1: RX AssocResp from 84:94:8c:ab:fc:c8 (capab=0xc31 status=0 aid=2) [ 3446.923194] wlo1: associated [ 3447.187910] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 5144.913381] hp_wmi: bad event status 0x5