[ 0.000000] microcode: CPU0 microcode updated early to revision 0x2a, date = 2018-01-18 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.0-128-generic (buildd@lcy01-amd64-019) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9) ) #154-Ubuntu SMP Fri May 25 14:15:18 UTC 2018 (Ubuntu 4.4.0-128.154-generic 4.4.131) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-128-generic.efi.signed root=UUID=4cb3cab8-35c8-40bd-a78a-972f0d2aa6a9 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c73cafff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c73cb000-0x00000000c7884fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c7885000-0x00000000dadcffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dadd0000-0x00000000dae92fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dae93000-0x00000000daebbfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000daebc000-0x00000000db7f3fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000db7f4000-0x00000000dba9cfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dba9d000-0x00000000dbafdfff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000dbafe000-0x00000000dbafefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ACPI=0xdae9b000 ACPI 2.0=0xdae9b000 SMBIOS=0xf0000 [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Dell Inc. XPS 13 9343/0TM99H, BIOS A07 11/11/2015 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x21f800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back [ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back [ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 3 base 00DE000000 mask 7FFE000000 uncachable [ 0.000000] 4 base 00DD000000 mask 7FFF000000 uncachable [ 0.000000] 5 base 021F800000 mask 7FFF800000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 8GB, type WB [ 0.000000] reg 1, base: 8GB, range: 512MB, type WB [ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC [ 0.000000] reg 3, base: 3552MB, range: 32MB, type UC [ 0.000000] reg 4, base: 3536MB, range: 16MB, type UC [ 0.000000] reg 5, base: 8696MB, range: 8MB, type UC [ 0.000000] total RAM covered: 8136M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 8 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 512MB, type WB [ 0.000000] reg 3, base: 3536MB, range: 16MB, type UC [ 0.000000] reg 4, base: 3552MB, range: 32MB, type UC [ 0.000000] reg 5, base: 4GB, range: 4GB, type WB [ 0.000000] reg 6, base: 8GB, range: 512MB, type WB [ 0.000000] reg 7, base: 8696MB, range: 8MB, type UC [ 0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdbaff max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 28672 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x03217000, 0x03217fff] PGTABLE [ 0.000000] BRK [0x03218000, 0x03218fff] PGTABLE [ 0.000000] BRK [0x03219000, 0x03219fff] PGTABLE [ 0.000000] BRK [0x0321a000, 0x0321afff] PGTABLE [ 0.000000] BRK [0x0321b000, 0x0321bfff] PGTABLE [ 0.000000] BRK [0x0321c000, 0x0321cfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x33632000-0x35b10fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000DAE9B000 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 0x00000000DAE9B0B8 0000F4 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DAEAE788 00010C (v05 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000DAE9B240 013544 (v02 DELL CBX3 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x00000000DB7F1F80 000040 [ 0.000000] ACPI: APIC 0x00000000DAEAE898 000084 (v03 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DAEAE920 000044 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x00000000DAEAE968 00009C (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000DAEAEA08 00003C (v01 DELL CBX3 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000DAEAEA48 000038 (v01 DELL CBX3 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000DAEAEA80 000455 (v01 SataRe SataTabl 00001000 INTL 20120913) [ 0.000000] ACPI: UEFI 0x00000000DAEAEED8 000042 (v01 00000000 00000000) [ 0.000000] ACPI: SSDT 0x00000000DAEAEF20 0004A7 (v02 Intel_ Tpm2Tabl 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEAF3C8 00004B (v02 MeSsdt MeSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: TPM2 0x00000000DAEAF418 000034 (v03 00000000 00000000) [ 0.000000] ACPI: SSDT 0x00000000DAEAF450 000CDB (v02 Ther_R Ther_Rvp 00001000 INTL 20120913) [ 0.000000] ACPI: ASF! 0x00000000DAEB0130 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: SSDT 0x00000000DAEB01D0 00051F (v02 PmRef Cpu0Ist 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEB06F0 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEB1268 0001C7 (v02 PmRef LakeTiny 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEB1430 0003A5 (v02 CppcTa CppcTabl 00001000 INTL 20120913) [ 0.000000] ACPI: PCCT 0x00000000DAEB17D8 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEB1848 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEB2310 004207 (v02 SaSsdt SaSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEB6518 004646 (v01 DptfTa DptfTabl 00001000 INTL 20120913) [ 0.000000] ACPI: SLIC 0x00000000DAEBAB60 000176 (v03 DELL CBX3 01072009 MSFT 00010013) [ 0.000000] ACPI: MSDM 0x00000000DAEBACD8 000055 (v03 DELL CBX3 06222004 AMI 00010013) [ 0.000000] ACPI: DMAR 0x00000000DAEBAD30 0000D4 (v01 INTEL BDW 00000001 INTL 00000001) [ 0.000000] ACPI: CSRT 0x00000000DAEBAE08 0000C4 (v01 INTL BDW-ULT 00000001 INTL 20100528) [ 0.000000] ACPI: BGRT 0x00000000DAEBAED0 000038 (v00 01072009 AMI 00010013) [ 0.000000] ACPI: DMI detected: DELL XPS 13 (2015) (force ACPI _REV to 5) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021f7fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x21f7f8000-0x21f7fcfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000021f7fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c73cafff] [ 0.000000] node 0: [mem 0x00000000c7885000-0x00000000dadcffff] [ 0.000000] node 0: [mem 0x00000000dbafe000-0x00000000dbafefff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000021f7fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f7fffff] [ 0.000000] On node 0 totalpages: 2072755 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 23 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13925 pages used for memmap [ 0.000000] DMA32 zone: 891159 pages, LIFO batch:31 [ 0.000000] Normal zone: 18400 pages used for memmap [ 0.000000] Normal zone: 1177600 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xdd800000-0xdf7fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x0]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x0]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x0]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] low level lint[0xff]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc73cb000-0xc7884fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdadd0000-0xdae92fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdae93000-0xdaebbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaebc000-0xdb7f3fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb7f4000-0xdba9cfff] [ 0.000000] PM: Registered nosave memory: [mem 0xdba9d000-0xdbafdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xdbaff000-0xdcffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 34 pages/cpu @ffff88021f400000 s99544 r8192 d31528 u524288 [ 0.000000] pcpu-alloc: s99544 r8192 d31528 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2040343 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-128-generic.efi.signed root=UUID=4cb3cab8-35c8-40bd-a78a-972f0d2aa6a9 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7697688K/8291020K available (8541K kernel code, 1313K rwdata, 4000K rodata, 1512K init, 1316K bss, 593332K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:33024 nr_irqs:728 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2194.855 MHz processor [ 0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.71 BogoMIPS (lpj=8779420) [ 0.000031] pid_max: default: 32768 minimum: 301 [ 0.000035] ACPI: Core revision 20150930 [ 0.000046] ACPI: Overriding _REV return value to 5 [ 0.022946] ACPI: 12 ACPI AML tables successfully acquired and loaded [ 0.023905] Security Framework initialized [ 0.023906] Yama: becoming mindful. [ 0.023917] AppArmor: AppArmor initialized [ 0.024363] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.025859] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.026512] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.026521] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.026707] Initializing cgroup subsys io [ 0.026709] Initializing cgroup subsys memory [ 0.026715] Initializing cgroup subsys devices [ 0.026717] Initializing cgroup subsys freezer [ 0.026719] Initializing cgroup subsys net_cls [ 0.026721] Initializing cgroup subsys perf_event [ 0.026722] Initializing cgroup subsys net_prio [ 0.026725] Initializing cgroup subsys hugetlb [ 0.026727] Initializing cgroup subsys pids [ 0.026742] CPU: Physical Processor ID: 0 [ 0.026743] CPU: Processor Core ID: 0 [ 0.026747] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.026748] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.027734] mce: CPU supports 7 MCE banks [ 0.027745] CPU0: Thermal monitoring enabled (TM1) [ 0.027753] process: using mwait in idle threads [ 0.027756] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.027757] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.027759] Spectre V2 : Mitigation: Full generic retpoline [ 0.027759] Spectre V2 : Enabling Indirect Branch Prediction Barrier [ 0.027760] Spectre V2 : Enabling Indirect Branch Restricted Speculation [ 0.027761] Spectre V2 : Speculation control IBPB supported IBRS supported [ 0.027762] Spectre V2 : Retpoline compiled kernel. Defaulting IBRS to disabled [ 0.027763] Speculative Store Bypass: Vulnerable [ 0.028119] Freeing SMP alternatives memory: 32K [ 0.038946] ftrace: allocating 32236 entries in 126 pages [ 0.065351] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.065353] smpboot: Max logical packages: 2 [ 0.065358] DMAR: Host address width 39 [ 0.065359] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.065369] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e [ 0.065370] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.065375] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da [ 0.065376] DMAR: RMRR base: 0x000000db9ee000 end: 0x000000db9fcfff [ 0.065378] DMAR: RMRR base: 0x000000dd000000 end: 0x000000df7fffff [ 0.065380] DMAR: ANDD device: 1 name: \_SB.PCI0.SDMA [ 0.065382] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.065383] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.065384] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.065385] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.065804] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.065806] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.066419] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.106110] TSC deadline timer enabled [ 0.106112] smpboot: CPU0: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz (family: 0x6, model: 0x3d, stepping: 0x4) [ 0.106130] Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver. [ 0.106149] ... version: 3 [ 0.106150] ... bit width: 48 [ 0.106151] ... generic registers: 4 [ 0.106152] ... value mask: 0000ffffffffffff [ 0.106153] ... max period: 00007fffffffffff [ 0.106154] ... fixed-purpose events: 3 [ 0.106155] ... event mask: 000000070000000f [ 0.106913] x86: Booting SMP configuration: [ 0.106914] .... node #0, CPUs: #1 [ 0.108230] microcode: CPU1 microcode updated early to revision 0x2a, date = 2018-01-18 [ 0.111352] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.111420] #2 #3 [ 0.119450] x86: Booted up 1 node, 4 CPUs [ 0.119453] smpboot: Total of 4 processors activated (17558.84 BogoMIPS) [ 0.123155] devtmpfs: initialized [ 0.125224] evm: security.selinux [ 0.125225] evm: security.SMACK64 [ 0.125226] evm: security.SMACK64EXEC [ 0.125227] evm: security.SMACK64TRANSMUTE [ 0.125228] evm: security.SMACK64MMAP [ 0.125229] evm: security.ima [ 0.125231] evm: security.capability [ 0.125286] PM: Registering ACPI NVS region [mem 0xdaebc000-0xdb7f3fff] (9666560 bytes) [ 0.125451] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.125461] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.125552] pinctrl core: initialized pinctrl subsystem [ 0.125651] RTC time: 7:06:22, date: 07/05/18 [ 0.125775] NET: Registered protocol family 16 [ 0.135436] cpuidle: using governor ladder [ 0.147438] cpuidle: using governor menu [ 0.147443] Error parsing PCC subspaces from PCCT [ 0.147514] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.147516] ACPI: bus type PCI registered [ 0.147518] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.147580] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.147582] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.147591] PCI: Using configuration type 1 for base access [ 0.147598] dmi type 0xB1 record - unknown flag [ 0.159804] ACPI: Added _OSI(Module Device) [ 0.159806] ACPI: Added _OSI(Processor Device) [ 0.159807] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.159809] ACPI: Added _OSI(Processor Aggregator Device) [ 0.165270] ACPI: Executed 16 blocks of module-level executable AML code [ 0.173741] ACPI: Dynamic OEM Table Load: [ 0.173747] ACPI: SSDT 0xFFFF8802153C1000 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.174611] ACPI: Dynamic OEM Table Load: [ 0.174616] ACPI: SSDT 0xFFFF880215BEA800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913) [ 0.175522] ACPI: Dynamic OEM Table Load: [ 0.175526] ACPI: SSDT 0xFFFF880214C00000 000119 (v02 PmRef ApCst 00003000 INTL 20120913) [ 0.177089] ACPI : EC: EC started [ 0.181239] ACPI: Interpreter enabled [ 0.181265] ACPI: (supports S0 S3 S4 S5) [ 0.181266] ACPI: Using IOAPIC for interrupt routing [ 0.181294] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.182935] ACPI: Power Resource [PG00] (on) [ 0.183323] ACPI: Power Resource [PG01] (on) [ 0.183701] ACPI: Power Resource [PG02] (on) [ 0.196818] ACPI: Power Resource [FN00] (off) [ 0.196886] ACPI: Power Resource [FN01] (off) [ 0.196950] ACPI: Power Resource [FN02] (off) [ 0.197011] ACPI: Power Resource [FN03] (off) [ 0.197073] ACPI: Power Resource [FN04] (off) [ 0.197878] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.197884] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.198405] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.198406] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.198775] PCI host bridge to bus 0000:00 [ 0.198778] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.198780] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.198782] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.198784] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.198786] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.198787] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.198789] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.198792] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.198794] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.198795] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.198797] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.198799] pci_bus 0000:00: root bus resource [mem 0xdf800000-0xfeafffff window] [ 0.198801] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.198810] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.198897] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 0.198912] pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit] [ 0.198918] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.198924] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.199010] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 0.199022] pci 0000:00:03.0: reg 0x10: [mem 0xf741c000-0xf741ffff 64bit] [ 0.199103] pci 0000:00:04.0: [8086:1603] type 00 class 0x118000 [ 0.199118] pci 0000:00:04.0: reg 0x10: [mem 0xf7410000-0xf7417fff 64bit] [ 0.199214] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 0.199238] pci 0000:00:14.0: reg 0x10: [mem 0xf7400000-0xf740ffff 64bit] [ 0.199284] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.199331] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.199364] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 0.199392] pci 0000:00:16.0: reg 0x10: [mem 0xf7425000-0xf742501f 64bit] [ 0.199442] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.199533] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300 [ 0.199555] pci 0000:00:1b.0: reg 0x10: [mem 0xf7418000-0xf741bfff 64bit] [ 0.199594] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.199648] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.199681] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400 [ 0.199740] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.199812] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.199846] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400 [ 0.199906] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.199974] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.200011] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320 [ 0.200037] pci 0000:00:1d.0: reg 0x10: [mem 0xf7423000-0xf74233ff] [ 0.200109] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.200156] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.200190] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 0.200508] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 0.200526] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] [ 0.200533] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] [ 0.200540] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] [ 0.200546] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] [ 0.200553] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.200560] pci 0000:00:1f.2: reg 0x24: [mem 0xf7422000-0xf74227ff] [ 0.200585] pci 0000:00:1f.2: PME# supported from D3hot [ 0.200651] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 0.200666] pci 0000:00:1f.3: reg 0x10: [mem 0xf7421000-0xf74210ff 64bit] [ 0.200684] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.200767] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000 [ 0.200805] pci 0000:00:1f.6: reg 0x10: [mem 0xf7420000-0xf7420fff 64bit] [ 0.201009] pci 0000:01:00.0: [10ec:5249] type 00 class 0xff0000 [ 0.201050] pci 0000:01:00.0: reg 0x10: [mem 0xf7300000-0xf7300fff] [ 0.201159] pci 0000:01:00.0: supports D1 D2 [ 0.201161] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.201211] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.211416] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.211421] pci 0000:00:1c.0: bridge window [mem 0xf7300000-0xf73fffff] [ 0.211535] pci 0000:02:00.0: [14e4:43b1] type 00 class 0x028000 [ 0.211573] pci 0000:02:00.0: reg 0x10: [mem 0xf7200000-0xf7207fff 64bit] [ 0.211588] pci 0000:02:00.0: reg 0x18: [mem 0xf7000000-0xf71fffff 64bit] [ 0.211679] pci 0000:02:00.0: supports D1 D2 [ 0.211682] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.211725] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.223453] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.223458] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf72fffff] [ 0.225908] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.225954] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.225998] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.226040] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.226083] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.226127] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.226170] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.226212] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.227651] ACPI: Enabled 3 GPEs in block 00 to 7F [ 0.227722] ACPI : EC: GPE = 0x27, I/O: command/status = 0x934, data = 0x930 [ 0.227834] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.227836] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.227839] vgaarb: loaded [ 0.227840] vgaarb: bridge control possible 0000:00:02.0 [ 0.228081] SCSI subsystem initialized [ 0.228126] libata version 3.00 loaded. [ 0.228144] ACPI: bus type USB registered [ 0.228157] usbcore: registered new interface driver usbfs [ 0.228164] usbcore: registered new interface driver hub [ 0.228177] usbcore: registered new device driver usb [ 0.228340] PCI: Using ACPI for IRQ routing [ 0.229589] PCI: pci_cache_line_size set to 64 bytes [ 0.229709] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.229710] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.229712] e820: reserve RAM buffer [mem 0xc73cb000-0xc7ffffff] [ 0.229713] e820: reserve RAM buffer [mem 0xdadd0000-0xdbffffff] [ 0.229715] e820: reserve RAM buffer [mem 0xdbaff000-0xdbffffff] [ 0.229717] e820: reserve RAM buffer [mem 0x21f800000-0x21fffffff] [ 0.229827] NetLabel: Initializing [ 0.229829] NetLabel: domain hash size = 128 [ 0.229829] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.229840] NetLabel: unlabeled traffic allowed by default [ 0.229912] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.229918] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.232933] amd_nb: Cannot enumerate AMD northbridges [ 0.232946] clocksource: Switched to clocksource hpet [ 0.238720] AppArmor: AppArmor Filesystem Enabled [ 0.238784] pnp: PnP ACPI init [ 0.238980] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.238982] system 00:00: [io 0xffff] has been reserved [ 0.238984] system 00:00: [io 0xffff] has been reserved [ 0.238986] system 00:00: [io 0xffff] has been reserved [ 0.238989] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.238990] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.238994] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.239035] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.239070] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.239073] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.239199] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.239370] pnp 00:04: Plug and Play ACPI device, IDs DLL0665 PNP0f13 (active) [ 0.239511] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.239513] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.239515] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.239517] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.239519] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.239521] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.239524] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.239526] system 00:05: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.239528] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.239530] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.239532] system 00:05: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.239534] system 00:05: [mem 0xf7ff0000-0xf7ffffff] has been reserved [ 0.239537] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.239948] system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved [ 0.239951] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved [ 0.239953] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved [ 0.239955] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.243983] pnp: PnP ACPI: found 7 devices [ 0.250211] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.250233] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.250239] pci 0000:00:1c.0: bridge window [mem 0xf7300000-0xf73fffff] [ 0.250245] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.250250] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf72fffff] [ 0.250258] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.250260] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.250262] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.250264] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.250266] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.250268] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.250270] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.250272] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.250273] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.250275] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.250277] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.250279] pci_bus 0000:00: resource 15 [mem 0xdf800000-0xfeafffff window] [ 0.250281] pci_bus 0000:01: resource 1 [mem 0xf7300000-0xf73fffff] [ 0.250283] pci_bus 0000:02: resource 1 [mem 0xf7000000-0xf72fffff] [ 0.250311] NET: Registered protocol family 2 [ 0.250440] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.250544] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.250653] TCP: Hash tables configured (established 65536 bind 65536) [ 0.250678] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.250699] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.250749] NET: Registered protocol family 1 [ 0.250762] pci 0000:00:02.0: Video device with shadowed ROM [ 0.269103] PCI: CLS 64 bytes, default 64 [ 0.269148] Unpacking initramfs... [ 0.798985] Freeing initrd memory: 37756K [ 0.799021] DMAR: ACPI device "INTL9C60:00" under DMAR at fed91000 as 00:15.0 [ 0.799032] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.799035] software IO TLB [mem 0xbf89c000-0xc389c000] (64MB) mapped at [ffff8800bf89c000-ffff8800c389bfff] [ 0.799093] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer [ 0.799095] hw unit of domain pp0-core 2^-14 Joules [ 0.799096] hw unit of domain package 2^-14 Joules [ 0.799097] hw unit of domain dram 2^-14 Joules [ 0.799098] hw unit of domain pp1-gpu 2^-14 Joules [ 0.799226] Scanning for low memory corruption every 60 seconds [ 0.799506] audit: initializing netlink subsys (disabled) [ 0.799519] audit: type=2000 audit(1530774381.792:1): initialized [ 0.799936] Initialise system trusted keyring [ 0.800026] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.800027] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.801305] zbud: loaded [ 0.801646] VFS: Disk quotas dquot_6.6.0 [ 0.801674] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.801887] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.802095] fuse init (API version 7.23) [ 0.802215] Key type big_key registered [ 0.802249] Allocating IMA MOK and blacklist keyrings. [ 0.802588] Key type asymmetric registered [ 0.802593] Asymmetric key parser 'x509' registered [ 0.802625] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.802649] io scheduler noop registered [ 0.802652] io scheduler deadline registered (default) [ 0.802680] io scheduler cfq registered [ 0.803150] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.803153] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.803156] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.803174] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 0.803176] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 0.803179] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 0.803186] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.803193] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.803232] efifb: probing for efifb [ 0.803244] efifb: framebuffer at 0xe0000000, mapped to 0xffffc90002000000, using 22528k, total 22528k [ 0.803246] efifb: mode is 3200x1800x32, linelength=12800, pages=1 [ 0.803247] efifb: scrolling: redraw [ 0.803249] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.803395] Console: switching to colour frame buffer device 400x112 [ 0.803453] fb0: EFI VGA frame buffer device [ 0.803462] intel_idle: MWAIT substates: 0x11142120 [ 0.803463] intel_idle: v0.4.1 model 0x3D [ 0.803465] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.804336] ACPI: AC Adapter [AC] (off-line) [ 0.804411] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.804792] ACPI: Lid Switch [LID0] [ 0.804829] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.804832] ACPI: Power Button [PBTN] [ 0.804864] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.804866] ACPI: Sleep Button [SBTN] [ 0.804903] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.804905] ACPI: Power Button [PWRF] [ 0.805944] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.805946] ACPI: Thermal Zone [THM] (25 C) [ 0.810576] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.810579] ACPI: Thermal Zone [TZ00] (41 C) [ 0.814349] thermal LNXTHERM:02: registered as thermal_zone2 [ 0.814352] ACPI: Thermal Zone [TZ01] (41 C) [ 0.814431] GHES: HEST is not enabled! [ 0.814559] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.817482] Linux agpgart interface v0.103 [ 0.829992] ACPI: Battery Slot [BAT0] (battery present) [ 0.831486] loop: module loaded [ 0.831705] libphy: Fixed MDIO Bus: probed [ 0.831707] tun: Universal TUN/TAP device driver, 1.6 [ 0.831709] tun: (C) 1999-2004 Max Krasnyansky [ 0.831740] PPP generic driver version 2.4.2 [ 0.831787] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.831791] ehci-pci: EHCI PCI platform driver [ 0.831918] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.831925] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.831935] ehci-pci 0000:00:1d.0: debug port 2 [ 0.835827] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.835840] ehci-pci 0000:00:1d.0: irq 21, io mem 0xf7423000 [ 0.844975] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.845010] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.845013] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.845015] usb usb1: Product: EHCI Host Controller [ 0.845017] usb usb1: Manufacturer: Linux 4.4.0-128-generic ehci_hcd [ 0.845019] usb usb1: SerialNumber: 0000:00:1d.0 [ 0.845146] hub 1-0:1.0: USB hub found [ 0.845151] hub 1-0:1.0: 2 ports detected [ 0.845271] ehci-platform: EHCI generic platform driver [ 0.845287] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.845291] ohci-pci: OHCI PCI platform driver [ 0.845301] ohci-platform: OHCI generic platform driver [ 0.845311] uhci_hcd: USB Universal Host Controller Interface driver [ 0.845432] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.845438] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.846497] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810 [ 0.846502] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.846568] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.846570] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.846572] usb usb2: Product: xHCI Host Controller [ 0.846574] usb usb2: Manufacturer: Linux 4.4.0-128-generic xhci-hcd [ 0.846575] usb usb2: SerialNumber: 0000:00:14.0 [ 0.846683] hub 2-0:1.0: USB hub found [ 0.846694] hub 2-0:1.0: 11 ports detected [ 0.854226] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.854231] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.854263] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.854265] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.854267] usb usb3: Product: xHCI Host Controller [ 0.854269] usb usb3: Manufacturer: Linux 4.4.0-128-generic xhci-hcd [ 0.854271] usb usb3: SerialNumber: 0000:00:14.0 [ 0.854398] hub 3-0:1.0: USB hub found [ 0.854406] hub 3-0:1.0: 4 ports detected [ 0.855573] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.856112] i8042: Warning: Keylock active [ 0.858282] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.858285] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.858435] mousedev: PS/2 mouse device common for all mice [ 0.858716] rtc_cmos 00:01: RTC can wake from S4 [ 0.858843] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.858870] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.858876] i2c /dev entries driver [ 0.858927] device-mapper: uevent: version 1.0.3 [ 0.858979] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 0.858996] Intel P-state driver initializing. [ 0.859152] ledtrig-cpu: registered to indicate activity on CPUs [ 0.859165] EFI Variables Facility v0.08 2004-May-17 [ 0.860078] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.864889] NET: Registered protocol family 10 [ 0.865138] NET: Registered protocol family 17 [ 0.865153] Key type dns_resolver registered [ 0.865396] microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x2a [ 0.865420] microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x2a [ 0.865427] microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x2a [ 0.865441] microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x2a [ 0.865530] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 0.865837] registered taskstats version 1 [ 0.865861] Loading compiled-in X.509 certificates [ 0.866659] Loaded X.509 cert 'Build time autogenerated kernel key: fc7b57a7df019f2655f66a8a374d74ee8f4999fc' [ 0.866679] zswap: loaded using pool lzo/zbud [ 0.871448] Key type trusted registered [ 0.879893] Key type encrypted registered [ 0.879913] AppArmor: AppArmor sha1 policy hashing enabled [ 0.879918] ima: No TPM chip found, activating TPM-bypass! [ 0.879940] evm: HMAC attrs: 0x1 [ 0.880304] Magic number: 10:186:116 [ 0.880427] rtc_cmos 00:01: setting system clock to 2018-07-05 07:06:22 UTC (1530774382) [ 0.880561] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.880562] EDD information not available. [ 0.880649] PM: Hibernation image not present or could not be loaded. [ 0.881806] Freeing unused kernel memory: 1512K [ 0.897032] Write protecting the kernel read-only data: 14336k [ 0.897513] Freeing unused kernel memory: 1688K [ 0.897740] Freeing unused kernel memory: 96K [ 0.910695] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available) [ 0.910721] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available) [ 0.911435] random: systemd-udevd: uninitialized urandom read (16 bytes read, 11 bits of entropy available) [ 0.911520] random: systemd-udevd: uninitialized urandom read (16 bytes read, 11 bits of entropy available) [ 0.911532] random: systemd-udevd: uninitialized urandom read (16 bytes read, 11 bits of entropy available) [ 0.915714] random: systemd-udevd: uninitialized urandom read (16 bytes read, 11 bits of entropy available) [ 0.915735] random: systemd-udevd: uninitialized urandom read (16 bytes read, 11 bits of entropy available) [ 0.915743] random: systemd-udevd: uninitialized urandom read (16 bytes read, 11 bits of entropy available) [ 0.915964] random: systemd-udevd: uninitialized urandom read (16 bytes read, 11 bits of entropy available) [ 0.915979] random: systemd-udevd: uninitialized urandom read (16 bytes read, 11 bits of entropy available) [ 0.956558] hidraw: raw HID events driver (C) Jiri Kosina [ 0.958992] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED [ 0.975710] wmi: Mapper loaded [ 0.979736] rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002) [ 0.979876] rtsx_pci 0000:01:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 45 [ 0.983096] [drm] Initialized drm 1.1.0 20060810 [ 0.986165] ahci 0000:00:1f.2: version 3.0 [ 0.986349] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.000997] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x8 impl SATA mode [ 1.001003] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst [ 1.001552] scsi host0: ahci [ 1.001677] scsi host1: ahci [ 1.001780] scsi host2: ahci [ 1.001880] scsi host3: ahci [ 1.001940] ata1: DUMMY [ 1.001942] ata2: DUMMY [ 1.001944] ata3: DUMMY [ 1.001947] ata4: SATA max UDMA/133 abar m2048@0xf7422000 port 0xf7422280 irq 46 [ 1.013866] [drm] Memory usable by graphics device = 4096M [ 1.013870] checking generic (e0000000 1600000) vs hw (e0000000 10000000) [ 1.013872] fb: switching to inteldrmfb from EFI VGA [ 1.013895] Console: switching to colour dummy device 80x25 [ 1.013961] [drm] Replacing VGA console driver [ 1.013996] [drm] ACPI BIOS requests an excessive sleep of 25000 ms, using 1500 ms instead [ 1.020170] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.020173] [drm] Driver supports precise vblank timestamp query. [ 1.020640] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.047437] fbcon: inteldrmfb (fb0) is primary device [ 1.047534] Console: switching to colour frame buffer device 400x112 [ 1.047591] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.047939] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.049756] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 1.049904] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0 [ 1.157032] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.165035] usb 2-3: new full-speed USB device number 2 using xhci_hcd [ 1.289472] usb 1-1: New USB device found, idVendor=8087, idProduct=8001 [ 1.289475] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.289704] hub 1-1:1.0: USB hub found [ 1.289776] hub 1-1:1.0: 8 ports detected [ 1.295423] usb 2-3: New USB device found, idVendor=0a5c, idProduct=216f [ 1.295427] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.295429] usb 2-3: Product: BCM20702A0 [ 1.295431] usb 2-3: Manufacturer: Broadcom Corp [ 1.295433] usb 2-3: SerialNumber: C48E8FF2E22E [ 1.321052] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.323075] ata4.00: READ LOG DMA EXT failed, trying unqueued [ 1.323128] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.323131] ata4.00: ATA-9: SAMSUNG SSD PM851 M.2 2280 256GB, EXT25D0Q, max UDMA/133 [ 1.323133] ata4.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.323489] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.323528] ata4.00: configured for UDMA/133 [ 1.323726] scsi 3:0:0:0: Direct-Access ATA SAMSUNG SSD PM85 5D0Q PQ: 0 ANSI: 5 [ 1.323920] sd 3:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 1.323959] sd 3:0:0:0: [sda] Write Protect is off [ 1.323963] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.323972] sd 3:0:0:0: Attached scsi generic sg0 type 0 [ 1.323979] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.325817] sda: sda1 sda2 sda3 [ 1.326365] sd 3:0:0:0: [sda] Attached SCSI disk [ 1.461012] usb 2-4: new full-speed USB device number 3 using xhci_hcd [ 1.590599] usb 2-4: New USB device found, idVendor=04f3, idProduct=20d0 [ 1.590603] usb 2-4: New USB device strings: Mfr=4, Product=14, SerialNumber=0 [ 1.590605] usb 2-4: Product: Touchscreen [ 1.590608] usb 2-4: Manufacturer: ELAN [ 1.590804] usb 2-4: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.757055] usb 2-5: new high-speed USB device number 4 using xhci_hcd [ 1.797043] tsc: Refined TSC clocksource calibration: 2194.918 MHz [ 1.797047] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa37202099, max_idle_ns: 440795206796 ns [ 1.887716] psmouse serio1: synaptics: queried max coordinates: x [..5666], y [..4734] [ 1.914282] psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1118..] [ 1.916338] usb 2-5: New USB device found, idVendor=0bda, idProduct=5758 [ 1.916342] usb 2-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 1.916344] usb 2-5: Product: Integrated_Webcam_HD [ 1.916346] usb 2-5: Manufacturer: CN09GTFM7248753IAHRBA00 [ 1.916348] usb 2-5: SerialNumber: 200901010001 [ 1.929080] usbcore: registered new interface driver usbhid [ 1.929083] usbhid: USB HID core driver [ 1.969644] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x12e800/0x0, board id: 3038, fw id: 1832324 [ 2.002592] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 2.797227] clocksource: Switched to clocksource tsc [ 3.075619] [drm:intel_dp_link_training_channel_equalization [i915]] *ERROR* 5.4 Gbps link rate without HBR2/TPS3 support [ 7.683651] random: nonblocking pool is initialized [ 7.822181] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 7.967899] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 7.968059] systemd[1]: Detected architecture x86-64. [ 7.968254] systemd[1]: Set hostname to . [ 8.062215] systemd[1]: Reached target User and Group Name Lookups. [ 8.062274] systemd[1]: Reached target Remote File Systems (Pre). [ 8.062357] systemd[1]: Created slice System Slice. [ 8.062521] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.062559] systemd[1]: Listening on Syslog Socket. [ 8.062626] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 8.062648] systemd[1]: Listening on udev Kernel Socket. [ 8.062701] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice. [ 8.062729] systemd[1]: Listening on udev Control Socket. [ 8.062762] systemd[1]: Started Trigger resolvconf update for networkd DNS. [ 8.062811] systemd[1]: Created slice User and Session Slice. [ 8.062818] systemd[1]: Reached target Slices. [ 8.062848] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.062902] systemd[1]: Listening on Journal Audit Socket. [ 8.062923] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.062931] systemd[1]: Reached target Remote File Systems. [ 8.062959] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.062990] systemd[1]: Listening on Journal Socket. [ 8.073368] systemd[1]: Started Read required files in advance. [ 8.074146] systemd[1]: Mounting Debug File System... [ 8.074660] systemd[1]: Starting Set console keymap... [ 8.075273] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 8.075870] systemd[1]: Started Braille Device Support. [ 8.076941] systemd[1]: Mounting Huge Pages File System... [ 8.077536] systemd[1]: Starting Uncomplicated firewall... [ 8.080930] systemd[1]: Starting Load Kernel Modules... [ 8.081438] systemd[1]: Starting Journal Service... [ 8.082358] systemd[1]: Mounting POSIX Message Queue File System... [ 8.083492] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 8.087217] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 8.087530] systemd[1]: Started Uncomplicated firewall. [ 8.092283] systemd[1]: Mounted POSIX Message Queue File System. [ 8.092404] systemd[1]: Mounted Debug File System. [ 8.092486] systemd[1]: Mounted Huge Pages File System. [ 8.107800] lp: driver loaded but no devices found [ 8.115426] ppdev: user-space parallel port driver [ 8.141365] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.143723] systemd[1]: Started Journal Service. [ 8.239442] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 8.285347] systemd-journald[286]: Received request to flush runtime journal from PID 1 [ 8.363006] ACPI Warning: \_SB_.IETM._ART: Return Package type mismatch at index 0 - found Integer, expected Reference (20150930/nspredef-297) [ 8.363231] ACPI: Invalid package element [0]: got number, expecting [R] [ 8.363234] _ART package 0 is invalid, ignored [ 8.395309] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels [ 8.430906] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) [ 8.435190] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.461508] intel_pch_thermal 0000:00:1f.6: enabling device (0000 -> 0002) [ 8.498423] wl: loading out-of-tree module taints kernel. [ 8.498429] wl: module license 'MIXED/Proprietary' taints kernel. [ 8.498430] Disabling lock debugging due to kernel taint [ 8.502176] wl: module verification failed: signature and/or required key missing - tainting kernel [ 8.504946] wl 0000:02:00.0: enabling device (0000 -> 0002) [ 8.527242] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 8.527411] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 8.527465] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 8.546819] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3263: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 8.546825] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 8.546828] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 8.546831] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 8.546833] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 8.546837] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x18 [ 8.546840] snd_hda_codec_realtek hdaudioC1D0: Headphone Mic=0x1a [ 8.546843] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 8.613833] wlan0: Broadcom BCM43b1 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334) [ 8.620673] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/0003:04F3:20D0.0001/input/input9 [ 8.620763] media: Linux media interface: v0.10 [ 8.628417] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8 [ 8.628677] hid-multitouch 0003:04F3:20D0.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0 [ 8.630098] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11 [ 8.630195] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12 [ 8.630279] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 8.634330] Bluetooth: Core ver 2.21 [ 8.634346] NET: Registered protocol family 31 [ 8.634349] Bluetooth: HCI device and connection manager initialized [ 8.634353] Bluetooth: HCI socket layer initialized [ 8.634356] Bluetooth: L2CAP socket layer initialized [ 8.634363] Bluetooth: SCO socket layer initialized [ 8.638391] Linux video capture interface: v2.00 [ 8.646660] input: DLL0665:01 06CB:76AD Touchpad as /devices/pci0000:00/INT3433:00/i2c-7/i2c-DLL0665:01/0018:06CB:76AD.0002/input/input14 [ 8.646835] hid-multitouch 0018:06CB:76AD.0002: input,hidraw1: I2C HID v1.00 Mouse [DLL0665:01 06CB:76AD] on i2c-DLL0665:01 [ 8.661379] AVX2 version of gcm_enc/dec engaged. [ 8.661383] AES CTR mode by8 optimization enabled [ 8.710747] intel_rapl: Found RAPL domain package [ 8.710751] intel_rapl: Found RAPL domain core [ 8.710754] intel_rapl: Found RAPL domain uncore [ 8.710757] intel_rapl: Found RAPL domain dram [ 8.710762] intel_rapl: RAPL package 0 domain package locked by BIOS [ 8.710767] intel_rapl: RAPL package 0 domain dram locked by BIOS [ 8.714545] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5758) [ 8.715518] usbcore: registered new interface driver btusb [ 8.720745] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input16 [ 8.720809] usbcore: registered new interface driver uvcvideo [ 8.720811] USB Video Class driver (1.1.1) [ 8.764091] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 8.819175] input: Dell WMI hotkeys as /devices/virtual/input/input17 [ 8.822892] Bluetooth: hci0: BCM: chip id 63 [ 8.838895] Bluetooth: hci0: BCM20702A [ 8.839892] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 [ 8.842233] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-216f.hcd failed with error -2 [ 8.842240] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-216f.hcd not found [ 8.852327] wl 0000:02:00.0 wlp2s0: renamed from wlan0 [ 8.873468] cfg80211: World regulatory domain updated: [ 8.873471] cfg80211: DFS Master region: unset [ 8.873472] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 8.873475] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 8.873477] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 8.873479] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 8.873481] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 8.873483] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 8.873485] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 8.873486] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 8.873488] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 9.523833] Adding 8290812k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:8290812k SSFS [ 9.564886] audit: type=1400 audit(1530774391.176:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine" pid=1005 comm="apparmor_parser" [ 9.564896] audit: type=1400 audit(1530774391.176:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1005 comm="apparmor_parser" [ 9.567933] audit: type=1400 audit(1530774391.180:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1004 comm="apparmor_parser" [ 9.567940] audit: type=1400 audit(1530774391.180:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1004 comm="apparmor_parser" [ 9.567945] audit: type=1400 audit(1530774391.180:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1004 comm="apparmor_parser" [ 9.567949] audit: type=1400 audit(1530774391.180:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1004 comm="apparmor_parser" [ 9.569093] audit: type=1400 audit(1530774391.180:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1003 comm="apparmor_parser" [ 9.569099] audit: type=1400 audit(1530774391.180:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=1003 comm="apparmor_parser" [ 9.571694] audit: type=1400 audit(1530774391.184:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1012 comm="apparmor_parser" [ 9.571705] audit: type=1400 audit(1530774391.184:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1012 comm="apparmor_parser" [ 9.742721] cgroup: new mount options do not match the existing superblock, will be ignored [ 9.833125] ACPI: Invalid package element [0]: got number, expecting [R] [ 9.833129] _ART package 0 is invalid, ignored [ 9.833155] ACPI: Invalid package element [0]: got number, expecting [R] [ 9.833156] _ART package 0 is invalid, ignored [ 9.968645] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 9.968650] Bluetooth: BNEP filters: protocol multicast [ 9.968654] Bluetooth: BNEP socket layer initialized [ 9.971102] powercap intel-rapl:0: package locked by BIOS, monitoring only [ 10.620978] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 10.910966] vboxdrv: Found 4 processor cores [ 10.933459] vboxdrv: TSC mode is Invariant, tentative frequency 2194919714 Hz [ 10.933462] vboxdrv: Successfully loaded version 5.0.40_Ubuntu (interface 0x00240000) [ 10.942033] VBoxNetFlt: Successfully started. [ 10.950379] VBoxNetAdp: Successfully started. [ 10.958094] VBoxPciLinuxInit [ 10.965552] vboxpci: IOMMU not found (not registered) [ 12.256591] Bluetooth: RFCOMM TTY layer initialized [ 12.256600] Bluetooth: RFCOMM socket layer initialized [ 12.256606] Bluetooth: RFCOMM ver 1.11 [ 1971.186648] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 1971.616080] PM: Syncing filesystems ... done. [ 1971.624823] PM: Preparing system for sleep (mem) [ 1971.625030] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 1971.627013] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 1971.628161] PM: Suspending system (mem) [ 1971.628177] Suspending console(s) (use no_console_suspend to debug) [ 1971.629295] sd 3:0:0:0: [sda] Synchronizing SCSI cache [ 1971.631020] sd 3:0:0:0: [sda] Stopping disk [ 1971.829603] psmouse serio1: Failed to disable mouse on isa0060/serio1 [ 1972.465801] PM: suspend of devices complete after 837.443 msecs [ 1972.485719] PM: late suspend of devices complete after 19.913 msecs [ 1972.486355] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 1972.486436] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 1972.502005] PM: noirq suspend of devices complete after 16.281 msecs [ 1972.502277] ACPI: Preparing to enter system sleep state S3 [ 1972.525832] ACPI : EC: EC stopped [ 1972.525833] PM: Saving platform NVS memory [ 1972.525854] Disabling non-boot CPUs ... [ 1972.526032] Broke affinity for irq 19 [ 1972.527058] smpboot: CPU 1 is now offline [ 1972.538114] Broke affinity for irq 19 [ 1972.538117] Broke affinity for irq 21 [ 1972.538122] Broke affinity for irq 42 [ 1972.538130] Broke affinity for irq 46 [ 1972.539149] smpboot: CPU 2 is now offline [ 1972.549993] Broke affinity for irq 1 [ 1972.549995] Broke affinity for irq 6 [ 1972.549997] Broke affinity for irq 7 [ 1972.549999] Broke affinity for irq 8 [ 1972.550001] Broke affinity for irq 9 [ 1972.550003] Broke affinity for irq 12 [ 1972.550005] Broke affinity for irq 19 [ 1972.550008] Broke affinity for irq 21 [ 1972.550010] Broke affinity for irq 39 [ 1972.550013] Broke affinity for irq 42 [ 1972.550014] Broke affinity for irq 43 [ 1972.550016] Broke affinity for irq 44 [ 1972.550020] Broke affinity for irq 46 [ 1972.550023] Broke affinity for irq 47 [ 1972.551034] smpboot: CPU 3 is now offline [ 1972.563220] ACPI: Low-level resume complete [ 1972.563274] ACPI : EC: EC started [ 1972.563275] PM: Restoring platform NVS memory [ 1972.565537] microcode: CPU0 microcode updated early to revision 0x2a, date = 2018-01-18 [ 1972.565568] Enabling non-boot CPUs ... [ 1972.583502] x86: Booting SMP configuration: [ 1972.583503] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 1972.584812] microcode: CPU1 microcode updated early to revision 0x2a, date = 2018-01-18 [ 1972.588042] cache: parent cpu1 should not be sleeping [ 1972.588181] CPU1 is up [ 1972.607557] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 1972.611024] cache: parent cpu2 should not be sleeping [ 1972.611167] CPU2 is up [ 1972.627489] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 1972.631006] cache: parent cpu3 should not be sleeping [ 1972.631109] CPU3 is up [ 1972.634595] ACPI: Waking up from system sleep state S3 [ 1973.488065] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 1973.503690] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 1973.504884] PM: noirq resume of devices complete after 17.365 msecs [ 1973.511434] PM: early resume of devices complete after 6.529 msecs [ 1973.511553] usb usb2: root hub lost power or was reset [ 1973.511556] usb usb3: root hub lost power or was reset [ 1973.513877] rtc_cmos 00:01: System wakeup disabled by ACPI [ 1973.526344] sd 3:0:0:0: [sda] Starting disk [ 1973.735407] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 1973.835441] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1973.837555] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1973.837851] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1973.837891] ata4.00: configured for UDMA/133 [ 1973.843431] usb 2-3: reset full-speed USB device number 2 using xhci_hcd [ 1974.083485] usb 2-5: reset high-speed USB device number 4 using xhci_hcd [ 1974.379585] usb 2-4: reset full-speed USB device number 3 using xhci_hcd [ 1974.508304] usb 2-4: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1974.522849] PM: resume of devices complete after 1011.377 msecs [ 1974.523988] PM: Finishing wakeup. [ 1974.523992] Restarting tasks ... [ 1974.529540] pci_bus 0000:01: Allocating resources [ 1974.529680] pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 1974.529686] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 1974.529695] pci_bus 0000:02: Allocating resources [ 1974.529741] pcieport 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 1974.529746] pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 1974.529753] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 1974.529762] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 1974.529766] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 1974.529771] pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 1974.529776] pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 1974.529780] pcieport 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 1974.529785] pcieport 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 1974.529789] pcieport 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 1974.529794] pcieport 0000:00:1c.3: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 1974.529814] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xdf800000-0xdf9fffff 64bit pref] [ 1974.529828] pcieport 0000:00:1c.3: BAR 15: assigned [mem 0xdfa00000-0xdfbfffff 64bit pref] [ 1974.529834] pcieport 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 1974.529839] pcieport 0000:00:1c.3: BAR 13: assigned [io 0x3000-0x3fff] [ 1974.530184] pci_bus 0000:01: Allocating resources [ 1974.530317] pci_bus 0000:02: Allocating resources [ 1974.530364] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 1974.543686] done. [ 1974.544559] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 1974.547025] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 1974.557863] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 1974.566317] pci_bus 0000:01: Allocating resources [ 1974.566449] pci_bus 0000:02: Allocating resources [ 1974.566496] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 1974.569946] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 1974.570041] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 1974.570177] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 1974.570199] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 1974.570221] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 1974.570348] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 1974.571014] cfg80211: World regulatory domain updated: [ 1974.571018] cfg80211: DFS Master region: unset [ 1974.571019] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 1974.571023] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 1974.571026] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 1974.571029] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 1974.571032] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 1974.571035] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 1974.571038] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 1974.571040] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 1974.571043] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 1974.625287] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 1974.645088] Bluetooth: hci0: BCM: chip id 63 [ 1974.661103] Bluetooth: hci0: BCM20702A [ 1974.662091] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 [ 1974.662106] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-216f.hcd failed with error -2 [ 1974.662109] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-216f.hcd not found [ 1974.797163] [drm:intel_dp_link_training_channel_equalization [i915]] *ERROR* 5.4 Gbps link rate without HBR2/TPS3 support [ 2055.100998] perf interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [ 2221.319895] perf interrupt took too long (5025 > 5000), lowering kernel.perf_event_max_sample_rate to 25000 [ 3975.947521] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 3976.013926] cfg80211: World regulatory domain updated: [ 3976.013929] cfg80211: DFS Master region: unset [ 3976.013930] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 3976.013932] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 3976.013934] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 3976.013936] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 3976.013938] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 3976.013940] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 3976.013941] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 3976.013943] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 3976.013944] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 3977.523183] PM: Syncing filesystems ... done. [ 3977.542392] PM: Preparing system for sleep (mem) [ 3977.542843] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 3977.545554] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 3977.546775] PM: Suspending system (mem) [ 3977.546792] Suspending console(s) (use no_console_suspend to debug) [ 3977.547887] sd 3:0:0:0: [sda] Synchronizing SCSI cache [ 3977.555354] ERROR @wl_notify_scan_status : wlp2s0 Scan_results error (-22) [ 3977.555572] sd 3:0:0:0: [sda] Stopping disk [ 3978.023541] PM: suspend of devices complete after 476.574 msecs [ 3978.043658] PM: late suspend of devices complete after 20.108 msecs [ 3978.044615] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 3978.044879] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 3978.060043] PM: noirq suspend of devices complete after 16.378 msecs [ 3978.060540] ACPI: Preparing to enter system sleep state S3 [ 3978.079639] ACPI : EC: EC stopped [ 3978.079639] PM: Saving platform NVS memory [ 3978.079661] Disabling non-boot CPUs ... [ 3978.079872] Broke affinity for irq 19 [ 3978.080903] smpboot: CPU 1 is now offline [ 3978.091939] Broke affinity for irq 19 [ 3978.091947] Broke affinity for irq 42 [ 3978.091956] Broke affinity for irq 46 [ 3978.092978] smpboot: CPU 2 is now offline [ 3978.103828] Broke affinity for irq 1 [ 3978.103831] Broke affinity for irq 6 [ 3978.103833] Broke affinity for irq 7 [ 3978.103834] Broke affinity for irq 8 [ 3978.103836] Broke affinity for irq 9 [ 3978.103838] Broke affinity for irq 12 [ 3978.103841] Broke affinity for irq 19 [ 3978.103843] Broke affinity for irq 21 [ 3978.103846] Broke affinity for irq 39 [ 3978.103848] Broke affinity for irq 42 [ 3978.103850] Broke affinity for irq 43 [ 3978.103852] Broke affinity for irq 44 [ 3978.103856] Broke affinity for irq 46 [ 3978.103859] Broke affinity for irq 47 [ 3978.104871] smpboot: CPU 3 is now offline [ 3978.117050] ACPI: Low-level resume complete [ 3978.117106] ACPI : EC: EC started [ 3978.117106] PM: Restoring platform NVS memory [ 3978.119371] microcode: CPU0 microcode updated early to revision 0x2a, date = 2018-01-18 [ 3978.119404] Enabling non-boot CPUs ... [ 3978.137289] x86: Booting SMP configuration: [ 3978.137290] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 3978.138600] microcode: CPU1 microcode updated early to revision 0x2a, date = 2018-01-18 [ 3978.141834] cache: parent cpu1 should not be sleeping [ 3978.141981] CPU1 is up [ 3978.165343] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 3978.168817] cache: parent cpu2 should not be sleeping [ 3978.168968] CPU2 is up [ 3978.185279] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 3978.188819] cache: parent cpu3 should not be sleeping [ 3978.188929] CPU3 is up [ 3978.192422] ACPI: Waking up from system sleep state S3 [ 3978.937345] ACPI Error: Cannot release Mutex [PATM], not acquired (20150930/exmutex-376) [ 3978.937351] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECDV._Q66] (Node ffff8802169d4e10), AE_AML_MUTEX_NOT_ACQUIRED (20150930/psparse-542) [ 3979.070157] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 3979.085729] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 3979.085807] PM: noirq resume of devices complete after 32.432 msecs [ 3979.091511] PM: early resume of devices complete after 5.682 msecs [ 3979.093177] sd 3:0:0:0: [sda] Starting disk [ 3979.099905] rtc_cmos 00:01: System wakeup disabled by ACPI [ 3979.171695] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [ 3979.187076] xhci_hcd 0000:00:14.0: port 2 resume PLC timeout [ 3979.409200] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3979.411266] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 3979.411574] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 3979.411616] ata4.00: configured for UDMA/133 [ 3979.413304] usb 2-4: reset full-speed USB device number 3 using xhci_hcd [ 3979.541938] usb 2-4: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes [ 3979.653395] usb 2-3: reset full-speed USB device number 2 using xhci_hcd [ 3979.893507] usb 2-5: reset high-speed USB device number 4 using xhci_hcd [ 3980.105522] PM: resume of devices complete after 1013.978 msecs [ 3980.106178] PM: Finishing wakeup. [ 3980.106179] Restarting tasks ... [ 3980.106677] pci_bus 0000:01: Allocating resources [ 3980.106805] pci_bus 0000:02: Allocating resources [ 3980.106852] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 3980.109299] done. [ 3980.130342] pci_bus 0000:01: Allocating resources [ 3980.130472] pci_bus 0000:02: Allocating resources [ 3980.130517] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 3980.139474] cfg80211: World regulatory domain updated: [ 3980.139477] cfg80211: DFS Master region: unset [ 3980.139479] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 3980.139481] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 3980.139483] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 3980.139485] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 3980.139487] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 3980.139489] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 3980.139490] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 3980.139492] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 3980.139494] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 3980.144723] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 3980.144853] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 3980.146392] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 3980.146807] pci_bus 0000:01: Allocating resources [ 3980.146932] pci_bus 0000:02: Allocating resources [ 3980.146977] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 3980.147829] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 3980.147928] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 3980.148066] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 3980.148089] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 3980.148110] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 3980.148237] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 3980.214783] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 3980.235259] Bluetooth: hci0: BCM: chip id 63 [ 3980.251249] Bluetooth: hci0: ChromeLinux_B83B [ 3980.252266] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 [ 3980.252289] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-216f.hcd failed with error -2 [ 3980.252291] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-216f.hcd not found [ 3980.362963] [drm:intel_dp_link_training_channel_equalization [i915]] *ERROR* 5.4 Gbps link rate without HBR2/TPS3 support [ 6949.962828] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 6950.002461] cfg80211: World regulatory domain updated: [ 6950.002465] cfg80211: DFS Master region: unset [ 6950.002467] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 6950.002470] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 6950.002473] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 6950.002476] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 6950.002478] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 6950.002481] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 6950.002484] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 6950.002486] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 6950.002489] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 6951.600318] PM: Syncing filesystems ... done. [ 6951.639632] PM: Preparing system for sleep (mem) [ 6951.639806] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 6951.641695] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 6951.642947] PM: Suspending system (mem) [ 6951.642963] Suspending console(s) (use no_console_suspend to debug) [ 6951.644113] sd 3:0:0:0: [sda] Synchronizing SCSI cache [ 6951.651959] ERROR @wl_notify_scan_status : wlp2s0 Scan_results error (-22) [ 6951.652647] sd 3:0:0:0: [sda] Stopping disk [ 6952.033798] PM: suspend of devices complete after 390.674 msecs [ 6952.049730] PM: late suspend of devices complete after 15.927 msecs [ 6952.050355] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 6952.050490] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 6952.065924] PM: noirq suspend of devices complete after 16.189 msecs [ 6952.066196] ACPI: Preparing to enter system sleep state S3 [ 6952.085770] ACPI : EC: EC stopped [ 6952.085771] PM: Saving platform NVS memory [ 6952.085791] Disabling non-boot CPUs ... [ 6952.086007] Broke affinity for irq 19 [ 6952.087040] smpboot: CPU 1 is now offline [ 6952.098117] Broke affinity for irq 19 [ 6952.098125] Broke affinity for irq 42 [ 6952.098134] Broke affinity for irq 46 [ 6952.099155] smpboot: CPU 2 is now offline [ 6952.109967] Broke affinity for irq 1 [ 6952.109970] Broke affinity for irq 6 [ 6952.109971] Broke affinity for irq 7 [ 6952.109973] Broke affinity for irq 8 [ 6952.109975] Broke affinity for irq 9 [ 6952.109977] Broke affinity for irq 12 [ 6952.109980] Broke affinity for irq 19 [ 6952.109982] Broke affinity for irq 21 [ 6952.109985] Broke affinity for irq 39 [ 6952.109988] Broke affinity for irq 42 [ 6952.109990] Broke affinity for irq 43 [ 6952.109992] Broke affinity for irq 44 [ 6952.109996] Broke affinity for irq 46 [ 6952.109998] Broke affinity for irq 47 [ 6952.111015] smpboot: CPU 3 is now offline [ 6952.127376] ACPI: Low-level resume complete [ 6952.127430] ACPI : EC: EC started [ 6952.127431] PM: Restoring platform NVS memory [ 6952.129671] microcode: CPU0 microcode updated early to revision 0x2a, date = 2018-01-18 [ 6952.129715] Enabling non-boot CPUs ... [ 6952.147513] x86: Booting SMP configuration: [ 6952.147514] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 6952.148826] microcode: CPU1 microcode updated early to revision 0x2a, date = 2018-01-18 [ 6952.152065] cache: parent cpu1 should not be sleeping [ 6952.152210] CPU1 is up [ 6952.171560] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 6952.175034] cache: parent cpu2 should not be sleeping [ 6952.175184] CPU2 is up [ 6952.191504] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 6952.195056] cache: parent cpu3 should not be sleeping [ 6952.195172] CPU3 is up [ 6952.198656] ACPI: Waking up from system sleep state S3 [ 6953.081987] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 6953.119746] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 6953.119832] PM: noirq resume of devices complete after 56.351 msecs [ 6953.125527] PM: early resume of devices complete after 5.674 msecs [ 6953.127016] sd 3:0:0:0: [sda] Starting disk [ 6953.127664] rtc_cmos 00:01: System wakeup disabled by ACPI [ 6953.205454] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [ 6953.220547] xhci_hcd 0000:00:14.0: port 2 resume PLC timeout [ 6953.447669] usb 2-3: reset full-speed USB device number 2 using xhci_hcd [ 6953.463392] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6953.465474] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 6953.465850] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 6953.465884] ata4.00: configured for UDMA/133 [ 6953.687622] usb 2-4: reset full-speed USB device number 3 using xhci_hcd [ 6953.816057] usb 2-4: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes [ 6953.927496] usb 2-5: reset high-speed USB device number 4 using xhci_hcd [ 6954.083489] PM: resume of devices complete after 957.971 msecs [ 6954.084138] PM: Finishing wakeup. [ 6954.084140] Restarting tasks ... [ 6954.093270] pci_bus 0000:01: Allocating resources [ 6954.093403] pci_bus 0000:02: Allocating resources [ 6954.093449] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 6954.093693] pci_bus 0000:01: Allocating resources [ 6954.093821] pci_bus 0000:02: Allocating resources [ 6954.093865] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 6954.102886] done. [ 6954.106594] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 6954.106732] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 6954.117719] cfg80211: World regulatory domain updated: [ 6954.117723] cfg80211: DFS Master region: unset [ 6954.117725] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 6954.117728] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 6954.117731] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 6954.117734] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 6954.117736] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 6954.117739] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 6954.117742] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 6954.117744] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 6954.117746] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 6954.121831] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 6954.122329] pci_bus 0000:01: Allocating resources [ 6954.122473] pci_bus 0000:02: Allocating resources [ 6954.122525] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 6954.123752] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 6954.123859] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 6954.124002] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 6954.124027] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 6954.124051] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 6954.124194] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 6954.180088] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 6954.201469] Bluetooth: hci0: BCM: chip id 63 [ 6954.217472] Bluetooth: hci0: ChromeLinux_B83B [ 6954.218462] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 [ 6954.218486] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-216f.hcd failed with error -2 [ 6954.218489] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-216f.hcd not found [ 6954.337066] [drm:intel_dp_link_training_channel_equalization [i915]] *ERROR* 5.4 Gbps link rate without HBR2/TPS3 support [ 7586.905290] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 7586.959138] cfg80211: World regulatory domain updated: [ 7586.959143] cfg80211: DFS Master region: unset [ 7586.959146] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 7586.959149] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 7586.959152] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 7586.959155] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 7586.959157] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 7586.959160] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 7586.959163] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 7586.959165] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 7586.959168] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 7587.977668] [drm:intel_dp_link_training_channel_equalization [i915]] *ERROR* 5.4 Gbps link rate without HBR2/TPS3 support [ 7589.364422] PM: Syncing filesystems ... done. [ 7589.412515] PM: Preparing system for sleep (mem) [ 7589.412704] Freezing user space processes ... (elapsed 0.004 seconds) done. [ 7589.416899] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [ 7589.417706] PM: Suspending system (mem) [ 7589.417723] Suspending console(s) (use no_console_suspend to debug) [ 7589.418978] sd 3:0:0:0: [sda] Synchronizing SCSI cache [ 7589.426934] ERROR @wl_notify_scan_status : wlp2s0 Scan_results error (-22) [ 7589.434388] sd 3:0:0:0: [sda] Stopping disk [ 7589.853807] PM: suspend of devices complete after 435.915 msecs [ 7589.869870] PM: late suspend of devices complete after 16.053 msecs [ 7589.870965] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 7589.871343] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 7589.886072] PM: noirq suspend of devices complete after 16.197 msecs [ 7589.886423] ACPI: Preparing to enter system sleep state S3 [ 7589.913813] ACPI : EC: EC stopped [ 7589.913814] PM: Saving platform NVS memory [ 7589.913836] Disabling non-boot CPUs ... [ 7589.914092] Broke affinity for irq 46 [ 7589.915119] smpboot: CPU 1 is now offline [ 7589.930294] Broke affinity for irq 19 [ 7589.930303] Broke affinity for irq 42 [ 7589.930314] Broke affinity for irq 46 [ 7589.931341] smpboot: CPU 2 is now offline [ 7589.942087] Broke affinity for irq 1 [ 7589.942090] Broke affinity for irq 6 [ 7589.942092] Broke affinity for irq 7 [ 7589.942095] Broke affinity for irq 8 [ 7589.942097] Broke affinity for irq 9 [ 7589.942100] Broke affinity for irq 12 [ 7589.942103] Broke affinity for irq 19 [ 7589.942106] Broke affinity for irq 21 [ 7589.942109] Broke affinity for irq 39 [ 7589.942112] Broke affinity for irq 42 [ 7589.942114] Broke affinity for irq 43 [ 7589.942117] Broke affinity for irq 44 [ 7589.942121] Broke affinity for irq 46 [ 7589.942124] Broke affinity for irq 47 [ 7589.943148] smpboot: CPU 3 is now offline [ 7589.955655] ACPI: Low-level resume complete [ 7589.955733] ACPI : EC: EC started [ 7589.955734] PM: Restoring platform NVS memory [ 7589.958028] microcode: CPU0 microcode updated early to revision 0x2a, date = 2018-01-18 [ 7589.958111] Enabling non-boot CPUs ... [ 7589.976028] x86: Booting SMP configuration: [ 7589.976029] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 7589.977452] microcode: CPU1 microcode updated early to revision 0x2a, date = 2018-01-18 [ 7589.981142] cache: parent cpu1 should not be sleeping [ 7589.981354] CPU1 is up [ 7590.000095] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 7590.004142] cache: parent cpu2 should not be sleeping [ 7590.004355] CPU2 is up [ 7590.024019] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 7590.028169] cache: parent cpu3 should not be sleeping [ 7590.028335] CPU3 is up [ 7590.033439] ACPI: Waking up from system sleep state S3 [ 7590.876316] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 7590.892539] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 7590.893056] PM: noirq resume of devices complete after 17.133 msecs [ 7590.899519] PM: early resume of devices complete after 6.441 msecs [ 7590.899655] usb usb2: root hub lost power or was reset [ 7590.899658] usb usb3: root hub lost power or was reset [ 7590.902323] rtc_cmos 00:01: System wakeup disabled by ACPI [ 7590.981635] sd 3:0:0:0: [sda] Starting disk [ 7591.127817] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 7591.136716] [drm:intel_dp_link_training_channel_equalization [i915]] *ERROR* 5.4 Gbps link rate without HBR2/TPS3 support [ 7591.231870] usb 2-3: reset full-speed USB device number 2 using xhci_hcd [ 7591.299800] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7591.301864] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 7591.302148] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 7591.302182] ata4.00: configured for UDMA/133 [ 7591.471856] usb 2-5: reset high-speed USB device number 4 using xhci_hcd [ 7591.767877] usb 2-4: reset full-speed USB device number 3 using xhci_hcd [ 7591.896599] usb 2-4: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes [ 7591.911951] PM: resume of devices complete after 1012.443 msecs [ 7591.912522] PM: Finishing wakeup. [ 7591.912523] Restarting tasks ... [ 7591.925730] pci_bus 0000:01: Allocating resources [ 7591.925854] pci_bus 0000:02: Allocating resources [ 7591.925916] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 7591.926208] pci_bus 0000:01: Allocating resources [ 7591.926344] pci_bus 0000:02: Allocating resources [ 7591.926395] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 7591.927662] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 7591.927869] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 7591.927997] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 7591.928527] pci_bus 0000:01: Allocating resources [ 7591.928666] pci_bus 0000:02: Allocating resources [ 7591.928761] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 7591.929696] done. [ 7591.949849] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 7591.949975] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 7591.950297] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 7591.950329] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 7591.950352] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 7591.950535] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 7591.984229] cfg80211: World regulatory domain updated: [ 7591.984234] cfg80211: DFS Master region: unset [ 7591.984236] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 7591.984239] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 7591.984242] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 7591.984244] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 7591.984247] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 7591.984250] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 7591.984253] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 7591.984262] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 7591.984264] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 7592.049553] Bluetooth: hci0: BCM: chip id 63 [ 7592.065631] Bluetooth: hci0: BCM20702A [ 7592.066617] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 [ 7592.074162] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-216f.hcd failed with error -2 [ 7592.074178] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-216f.hcd not found [ 7592.085840] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 9755.242844] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 9756.362941] [drm:intel_dp_link_training_channel_equalization [i915]] *ERROR* 5.4 Gbps link rate without HBR2/TPS3 support [ 9757.649997] PM: Syncing filesystems ... done. [ 9757.709321] PM: Preparing system for sleep (mem) [ 9757.710029] Freezing user space processes ... (elapsed 0.003 seconds) done. [ 9757.713403] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9757.714740] PM: Suspending system (mem) [ 9757.714757] Suspending console(s) (use no_console_suspend to debug) [ 9757.715992] sd 3:0:0:0: [sda] Synchronizing SCSI cache [ 9757.723887] sd 3:0:0:0: [sda] Stopping disk [ 9758.029618] PM: suspend of devices complete after 314.696 msecs [ 9758.046055] PM: late suspend of devices complete after 16.419 msecs [ 9758.046616] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 9758.046775] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 9758.062202] PM: noirq suspend of devices complete after 16.144 msecs [ 9758.062474] ACPI: Preparing to enter system sleep state S3 [ 9758.082048] ACPI : EC: EC stopped [ 9758.082049] PM: Saving platform NVS memory [ 9758.082070] Disabling non-boot CPUs ... [ 9758.082301] Broke affinity for irq 47 [ 9758.083323] smpboot: CPU 1 is now offline [ 9758.094384] Broke affinity for irq 42 [ 9758.094394] Broke affinity for irq 46 [ 9758.094397] Broke affinity for irq 47 [ 9758.095415] smpboot: CPU 2 is now offline [ 9758.106289] Broke affinity for irq 1 [ 9758.106291] Broke affinity for irq 6 [ 9758.106293] Broke affinity for irq 7 [ 9758.106295] Broke affinity for irq 8 [ 9758.106297] Broke affinity for irq 9 [ 9758.106299] Broke affinity for irq 12 [ 9758.106301] Broke affinity for irq 19 [ 9758.106304] Broke affinity for irq 21 [ 9758.106306] Broke affinity for irq 39 [ 9758.106309] Broke affinity for irq 42 [ 9758.106311] Broke affinity for irq 43 [ 9758.106313] Broke affinity for irq 44 [ 9758.106317] Broke affinity for irq 46 [ 9758.106320] Broke affinity for irq 47 [ 9758.107338] smpboot: CPU 3 is now offline [ 9758.123467] ACPI: Low-level resume complete [ 9758.123522] ACPI : EC: EC started [ 9758.123523] PM: Restoring platform NVS memory [ 9758.125781] microcode: CPU0 microcode updated early to revision 0x2a, date = 2018-01-18 [ 9758.125826] Enabling non-boot CPUs ... [ 9758.143699] x86: Booting SMP configuration: [ 9758.143700] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 9758.145011] microcode: CPU1 microcode updated early to revision 0x2a, date = 2018-01-18 [ 9758.148260] cache: parent cpu1 should not be sleeping [ 9758.148408] CPU1 is up [ 9758.167751] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 9758.171232] cache: parent cpu2 should not be sleeping [ 9758.171383] CPU2 is up [ 9758.187688] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 9758.191239] cache: parent cpu3 should not be sleeping [ 9758.191349] CPU3 is up [ 9758.194828] ACPI: Waking up from system sleep state S3 [ 9759.081391] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 9759.119950] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 9759.120029] PM: noirq resume of devices complete after 56.370 msecs [ 9759.125828] PM: early resume of devices complete after 5.777 msecs [ 9759.125973] usb usb2: root hub lost power or was reset [ 9759.125976] usb usb3: root hub lost power or was reset [ 9759.128522] rtc_cmos 00:01: System wakeup disabled by ACPI [ 9759.133147] sd 3:0:0:0: [sda] Starting disk [ 9759.351581] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 9759.381296] [drm:intel_dp_link_training_channel_equalization [i915]] *ERROR* 5.4 Gbps link rate without HBR2/TPS3 support [ 9759.447536] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 9759.449547] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 9759.449825] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 9759.449862] ata4.00: configured for UDMA/133 [ 9759.455649] usb 2-3: reset full-speed USB device number 2 using xhci_hcd [ 9759.695643] usb 2-4: reset full-speed USB device number 3 using xhci_hcd [ 9759.824286] usb 2-4: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes [ 9759.935629] usb 2-5: reset high-speed USB device number 4 using xhci_hcd [ 9760.091943] PM: resume of devices complete after 966.118 msecs [ 9760.093764] PM: Finishing wakeup. [ 9760.093769] Restarting tasks ... [ 9760.106502] pci_bus 0000:01: Allocating resources [ 9760.106680] pci_bus 0000:02: Allocating resources [ 9760.106794] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 9760.107763] pci_bus 0000:01: Allocating resources [ 9760.107914] pci_bus 0000:02: Allocating resources [ 9760.107972] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 9760.112994] done. [ 9760.136408] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 9760.136823] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 9760.145038] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 9760.146167] pci_bus 0000:01: Allocating resources [ 9760.146341] pci_bus 0000:02: Allocating resources [ 9760.146461] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 9760.152625] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 9760.152984] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 9760.153493] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 9760.153575] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 9760.153655] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 9760.154155] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 9760.201558] cfg80211: World regulatory domain updated: [ 9760.201578] cfg80211: DFS Master region: unset [ 9760.201584] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 9760.201594] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 9760.201605] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 9760.201622] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 9760.201630] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 9760.201640] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 9760.201648] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 9760.201664] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 9760.201671] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 9760.225346] Bluetooth: hci0: BCM: chip id 63 [ 9760.241465] Bluetooth: hci0: BCM20702A [ 9760.242290] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 [ 9760.242343] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-216f.hcd failed with error -2 [ 9760.242357] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-216f.hcd not found [ 9760.416391] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [10125.422303] ------------[ cut here ]------------ [10125.422337] WARNING: CPU: 1 PID: 2449 at /build/linux-prqDW9/linux-4.4.0/drivers/gpu/drm/i915/intel_uncore.c:619 hsw_unclaimed_reg_debug+0x69/0x90 [i915]() [10125.422339] Unclaimed register detected before reading register 0x44408 [10125.422340] Modules linked in: rfcomm pci_stub vboxpci(OE) vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) bnep binfmt_misc drbg ansi_cprng dm_crypt dell_wmi sparse_keymap dell_laptop dcdbas uvcvideo intel_rapl x86_pkg_temp_thermal videobuf2_vmalloc videobuf2_memops intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel btusb aesni_intel videobuf2_v4l2 btrtl videobuf2_core aes_x86_64 lrw btbcm gf128mul btintel v4l2_common videodev glue_helper bluetooth snd_hda_codec_hdmi ablk_helper cryptd media hid_multitouch dell_led snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep wl(POE) snd_pcm joydev input_leds serio_raw snd_seq_midi snd_seq_midi_event snd_rawmidi cfg80211 snd_seq rtsx_pci_ms memstick snd_seq_device intel_pch_thermal snd_timer lpc_ich [10125.422376] snd soundcore mei_me shpchp mei processor_thermal_device intel_soc_dts_iosf int3403_thermal acpi_pad dw_dmac kvm_intel mac_hid dw_dmac_core int3402_thermal int340x_thermal_zone int3400_thermal i2c_designware_platform kvm tpm_crb i2c_designware_core acpi_thermal_rel irqbypass parport_pc ppdev lp parport autofs4 usbhid rtsx_pci_sdmmc i915 i2c_algo_bit psmouse drm_kms_helper syscopyarea sysfillrect ahci sysimgblt libahci fb_sys_fops drm rtsx_pci wmi fjes i2c_hid video hid [10125.422401] CPU: 1 PID: 2449 Comm: soffice.bin Tainted: P OE 4.4.0-128-generic #154-Ubuntu [10125.422402] Hardware name: Dell Inc. XPS 13 9343/0TM99H, BIOS A07 11/11/2015 [10125.422404] 0000000000000086 19262e3d79225eea ffff88021f483d58 ffffffff81401473 [10125.422407] ffff88021f483da0 ffffffffc02601e0 ffff88021f483d90 ffffffff81084432 [10125.422409] ffff8800350c0000 0000000000044408 ffff880210cdd800 0000000000044408 [10125.422411] Call Trace: [10125.422413] [] dump_stack+0x63/0x90 [10125.422421] [] warn_slowpath_common+0x82/0xc0 [10125.422423] [] warn_slowpath_fmt+0x5c/0x80 [10125.422440] [] hsw_unclaimed_reg_debug+0x69/0x90 [i915] [10125.422456] [] gen6_read32+0x59/0x1a0 [i915] [10125.422467] [] gen8_irq_handler+0x124/0x7a0 [i915] [10125.422470] [] handle_irq_event_percpu+0x93/0x1e0 [10125.422473] [] handle_irq_event+0x3e/0x60 [10125.422475] [] handle_edge_irq+0x8a/0x170 [10125.422479] [] handle_irq+0x23/0x30 [10125.422482] [] do_IRQ+0x4b/0xe0 [10125.422485] [] common_interrupt+0xbf/0xbf [10125.422486] [10125.422487] ---[ end trace b94fcd4741b26d42 ]--- [11322.079943] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [11323.185137] [drm:intel_dp_link_training_channel_equalization [i915]] *ERROR* 5.4 Gbps link rate without HBR2/TPS3 support [11324.415556] PM: Syncing filesystems ... done. [11324.473841] PM: Preparing system for sleep (mem) [11324.474003] Freezing user space processes ... (elapsed 0.002 seconds) done. [11324.476040] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [11324.477303] PM: Suspending system (mem) [11324.477321] Suspending console(s) (use no_console_suspend to debug) [11324.478578] sd 3:0:0:0: [sda] Synchronizing SCSI cache [11324.480599] sd 3:0:0:0: [sda] Stopping disk [11324.791136] PM: suspend of devices complete after 313.648 msecs [11324.811170] PM: late suspend of devices complete after 20.029 msecs [11324.811697] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [11324.811880] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [11324.827345] PM: noirq suspend of devices complete after 16.172 msecs [11324.827617] ACPI: Preparing to enter system sleep state S3 [11324.847205] ACPI : EC: EC stopped [11324.847206] PM: Saving platform NVS memory [11324.847227] Disabling non-boot CPUs ... [11324.847470] Broke affinity for irq 47 [11324.848493] smpboot: CPU 1 is now offline [11324.859565] Broke affinity for irq 19 [11324.859573] Broke affinity for irq 42 [11324.859582] Broke affinity for irq 47 [11324.860604] smpboot: CPU 2 is now offline [11324.875444] Broke affinity for irq 1 [11324.875447] Broke affinity for irq 6 [11324.875449] Broke affinity for irq 7 [11324.875452] Broke affinity for irq 8 [11324.875454] Broke affinity for irq 9 [11324.875456] Broke affinity for irq 12 [11324.875459] Broke affinity for irq 19 [11324.875462] Broke affinity for irq 21 [11324.875466] Broke affinity for irq 39 [11324.875468] Broke affinity for irq 42 [11324.875471] Broke affinity for irq 43 [11324.875473] Broke affinity for irq 44 [11324.875478] Broke affinity for irq 46 [11324.875481] Broke affinity for irq 47 [11324.876504] smpboot: CPU 3 is now offline [11324.888795] ACPI: Low-level resume complete [11324.888851] ACPI : EC: EC started [11324.888851] PM: Restoring platform NVS memory [11324.891113] microcode: CPU0 microcode updated early to revision 0x2a, date = 2018-01-18 [11324.891161] Enabling non-boot CPUs ... [11324.908949] x86: Booting SMP configuration: [11324.908950] smpboot: Booting Node 0 Processor 1 APIC 0x2 [11324.910260] microcode: CPU1 microcode updated early to revision 0x2a, date = 2018-01-18 [11324.913502] cache: parent cpu1 should not be sleeping [11324.913650] CPU1 is up [11324.932997] smpboot: Booting Node 0 Processor 2 APIC 0x1 [11324.936479] cache: parent cpu2 should not be sleeping [11324.936627] CPU2 is up [11324.952941] smpboot: Booting Node 0 Processor 3 APIC 0x3 [11324.956491] cache: parent cpu3 should not be sleeping [11324.956605] CPU3 is up [11324.960101] ACPI: Waking up from system sleep state S3 [11325.809296] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [11325.825203] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [11325.826087] PM: noirq resume of devices complete after 17.168 msecs [11325.832604] PM: early resume of devices complete after 6.495 msecs [11325.832842] usb usb2: root hub lost power or was reset [11325.832844] usb usb3: root hub lost power or was reset [11325.835113] rtc_cmos 00:01: System wakeup disabled by ACPI [11325.842244] sd 3:0:0:0: [sda] Starting disk [11326.060792] usb 1-1: reset high-speed USB device number 2 using ehci-pci [11326.069606] [drm:intel_dp_link_training_channel_equalization [i915]] *ERROR* 5.4 Gbps link rate without HBR2/TPS3 support [11326.152789] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [11326.154857] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [11326.155566] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [11326.155675] ata4.00: configured for UDMA/133 [11326.164840] usb 2-3: reset full-speed USB device number 2 using xhci_hcd [11326.404861] usb 2-5: reset high-speed USB device number 4 using xhci_hcd [11326.700953] usb 2-4: reset full-speed USB device number 3 using xhci_hcd [11326.829644] usb 2-4: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes [11326.844652] PM: resume of devices complete after 1012.054 msecs [11326.845373] PM: Finishing wakeup. [11326.845375] Restarting tasks ... [11326.862429] pci_bus 0000:01: Allocating resources [11326.862568] pci_bus 0000:02: Allocating resources [11326.862614] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [11326.862893] pci_bus 0000:01: Allocating resources [11326.863071] pci_bus 0000:02: Allocating resources [11326.863119] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [11326.863709] done. [11326.872508] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [11326.872650] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [11326.878528] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [11326.878978] pci_bus 0000:01: Allocating resources [11326.879112] pci_bus 0000:02: Allocating resources [11326.879159] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [11326.880087] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [11326.880205] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [11326.880365] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [11326.880392] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [11326.880414] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [11326.880559] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [11326.887525] cfg80211: World regulatory domain updated: [11326.887530] cfg80211: DFS Master region: unset [11326.887532] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [11326.887535] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [11326.887538] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [11326.887540] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [11326.887543] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [11326.887546] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [11326.887548] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [11326.887551] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [11326.887553] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [11326.956044] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [11326.966515] Bluetooth: hci0: BCM: chip id 63 [11326.982556] Bluetooth: hci0: BCM20702A [11326.983551] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 [11326.983574] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-216f.hcd failed with error -2 [11326.983577] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-216f.hcd not found [12065.500561] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12065.554020] cfg80211: World regulatory domain updated: [12065.554025] cfg80211: DFS Master region: unset [12065.554027] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [12065.554031] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [12065.554034] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [12065.554037] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [12065.554040] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [12065.554043] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [12065.554046] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [12065.554049] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [12065.554051] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [12067.018613] PM: Syncing filesystems ... done. [12067.062435] PM: Preparing system for sleep (mem) [12067.062600] Freezing user space processes ... (elapsed 0.002 seconds) done. [12067.064643] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [12067.065896] PM: Suspending system (mem) [12067.065912] Suspending console(s) (use no_console_suspend to debug) [12067.067191] sd 3:0:0:0: [sda] Synchronizing SCSI cache [12067.074863] sd 3:0:0:0: [sda] Stopping disk [12067.369208] PM: suspend of devices complete after 303.126 msecs [12067.389387] PM: late suspend of devices complete after 20.161 msecs [12067.390007] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [12067.390094] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [12067.405525] PM: noirq suspend of devices complete after 16.134 msecs [12067.405797] ACPI: Preparing to enter system sleep state S3 [12067.425367] ACPI : EC: EC stopped [12067.425367] PM: Saving platform NVS memory [12067.425389] Disabling non-boot CPUs ... [12067.425632] Broke affinity for irq 46 [12067.426651] smpboot: CPU 1 is now offline [12067.437720] Broke affinity for irq 19 [12067.437729] Broke affinity for irq 42 [12067.437738] Broke affinity for irq 46 [12067.438759] smpboot: CPU 2 is now offline [12067.449578] Broke affinity for irq 1 [12067.449581] Broke affinity for irq 6 [12067.449583] Broke affinity for irq 7 [12067.449585] Broke affinity for irq 8 [12067.449587] Broke affinity for irq 9 [12067.449589] Broke affinity for irq 12 [12067.449591] Broke affinity for irq 19 [12067.449594] Broke affinity for irq 21 [12067.449596] Broke affinity for irq 39 [12067.449599] Broke affinity for irq 42 [12067.449601] Broke affinity for irq 43 [12067.449603] Broke affinity for irq 44 [12067.449607] Broke affinity for irq 46 [12067.449609] Broke affinity for irq 47 [12067.450627] smpboot: CPU 3 is now offline [12067.462801] ACPI: Low-level resume complete [12067.462856] ACPI : EC: EC started [12067.462857] PM: Restoring platform NVS memory [12067.465098] microcode: CPU0 microcode updated early to revision 0x2a, date = 2018-01-18 [12067.465150] Enabling non-boot CPUs ... [12067.483020] x86: Booting SMP configuration: [12067.483021] smpboot: Booting Node 0 Processor 1 APIC 0x2 [12067.484330] microcode: CPU1 microcode updated early to revision 0x2a, date = 2018-01-18 [12067.487572] cache: parent cpu1 should not be sleeping [12067.487723] CPU1 is up [12067.507066] smpboot: Booting Node 0 Processor 2 APIC 0x1 [12067.510544] cache: parent cpu2 should not be sleeping [12067.510693] CPU2 is up [12067.527013] smpboot: Booting Node 0 Processor 3 APIC 0x3 [12067.530564] cache: parent cpu3 should not be sleeping [12067.530677] CPU3 is up [12067.534188] ACPI: Waking up from system sleep state S3 [12068.379501] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [12068.394987] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [12068.396105] PM: noirq resume of devices complete after 17.106 msecs [12068.402627] PM: early resume of devices complete after 6.501 msecs [12068.404992] rtc_cmos 00:01: System wakeup disabled by ACPI [12068.411286] sd 3:0:0:0: [sda] Starting disk [12068.483862] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [12068.498916] xhci_hcd 0000:00:14.0: port 2 resume PLC timeout [12068.722902] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [12068.723149] usb 2-4: reset full-speed USB device number 3 using xhci_hcd [12068.724992] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [12068.725379] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [12068.725420] ata4.00: configured for UDMA/133 [12068.851662] usb 2-4: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes [12068.963044] usb 2-5: reset high-speed USB device number 4 using xhci_hcd [12069.315133] usb 2-3: reset full-speed USB device number 2 using xhci_hcd [12069.445097] PM: resume of devices complete after 1042.483 msecs [12069.445560] PM: Finishing wakeup. [12069.445562] Restarting tasks ... [12069.447996] pci_bus 0000:01: Allocating resources [12069.448130] pci_bus 0000:02: Allocating resources [12069.448176] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12069.456491] pci_bus 0000:01: Allocating resources [12069.456624] pci_bus 0000:02: Allocating resources [12069.456670] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12069.456979] done. [12069.463574] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12069.463947] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12069.466993] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12069.467407] pci_bus 0000:01: Allocating resources [12069.467539] pci_bus 0000:02: Allocating resources [12069.467584] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12069.471779] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12069.471885] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12069.472019] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12069.472042] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12069.472066] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12069.472230] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12069.484971] cfg80211: World regulatory domain updated: [12069.484978] cfg80211: DFS Master region: unset [12069.484980] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [12069.484983] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [12069.484986] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [12069.484989] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [12069.484992] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [12069.484996] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [12069.484999] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [12069.485001] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [12069.485005] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [12069.535215] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [12069.584941] Bluetooth: hci0: BCM: chip id 63 [12069.600915] Bluetooth: hci0: BCM20702A [12069.601925] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 [12069.601949] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-216f.hcd failed with error -2 [12069.601952] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-216f.hcd not found [12069.706623] [drm:intel_dp_link_training_channel_equalization [i915]] *ERROR* 5.4 Gbps link rate without HBR2/TPS3 support [12426.928197] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12427.000121] cfg80211: World regulatory domain updated: [12427.000125] cfg80211: DFS Master region: unset [12427.000126] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [12427.000129] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [12427.000131] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [12427.000133] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [12427.000135] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [12427.000136] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [12427.000138] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [12427.000140] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [12427.000141] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [12427.433021] ACPI Error: Cannot release Mutex [PATM], not acquired (20150930/exmutex-376) [12427.433028] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECDV._Q66] (Node ffff8802169d4e10), AE_AML_MUTEX_NOT_ACQUIRED (20150930/psparse-542) [12428.484209] PM: Syncing filesystems ... done. [12428.519506] PM: Preparing system for sleep (mem) [12428.519680] Freezing user space processes ... (elapsed 0.001 seconds) done. [12428.521343] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [12428.522598] PM: Suspending system (mem) [12428.522614] Suspending console(s) (use no_console_suspend to debug) [12428.523794] sd 3:0:0:0: [sda] Synchronizing SCSI cache [12428.531474] ERROR @wl_notify_scan_status : wlp2s0 Scan_results error (-22) [12428.532177] sd 3:0:0:0: [sda] Stopping disk [12428.825365] PM: suspend of devices complete after 302.590 msecs [12428.845289] PM: late suspend of devices complete after 19.905 msecs [12428.845873] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [12428.845978] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [12428.861564] PM: noirq suspend of devices complete after 16.273 msecs [12428.861836] ACPI: Preparing to enter system sleep state S3 [12428.881411] ACPI : EC: EC stopped [12428.881412] PM: Saving platform NVS memory [12428.881433] Disabling non-boot CPUs ... [12428.881639] Broke affinity for irq 19 [12428.882676] smpboot: CPU 1 is now offline [12428.893760] Broke affinity for irq 19 [12428.893768] Broke affinity for irq 42 [12428.893776] Broke affinity for irq 46 [12428.894797] smpboot: CPU 2 is now offline [12428.905603] Broke affinity for irq 1 [12428.905605] Broke affinity for irq 6 [12428.905607] Broke affinity for irq 7 [12428.905609] Broke affinity for irq 8 [12428.905611] Broke affinity for irq 9 [12428.905613] Broke affinity for irq 12 [12428.905615] Broke affinity for irq 19 [12428.905618] Broke affinity for irq 21 [12428.905621] Broke affinity for irq 39 [12428.905624] Broke affinity for irq 42 [12428.905626] Broke affinity for irq 43 [12428.905628] Broke affinity for irq 44 [12428.905632] Broke affinity for irq 46 [12428.905634] Broke affinity for irq 47 [12428.906650] smpboot: CPU 3 is now offline [12428.923020] ACPI: Low-level resume complete [12428.923076] ACPI : EC: EC started [12428.923076] PM: Restoring platform NVS memory [12428.925324] microcode: CPU0 microcode updated early to revision 0x2a, date = 2018-01-18 [12428.925380] Enabling non-boot CPUs ... [12428.943152] x86: Booting SMP configuration: [12428.943153] smpboot: Booting Node 0 Processor 1 APIC 0x2 [12428.944462] microcode: CPU1 microcode updated early to revision 0x2a, date = 2018-01-18 [12428.947702] cache: parent cpu1 should not be sleeping [12428.947851] CPU1 is up [12428.971188] smpboot: Booting Node 0 Processor 2 APIC 0x1 [12428.974672] cache: parent cpu2 should not be sleeping [12428.974778] CPU2 is up [12428.991241] smpboot: Booting Node 0 Processor 3 APIC 0x3 [12428.994848] cache: parent cpu3 should not be sleeping [12428.994968] CPU3 is up [12428.998403] ACPI: Waking up from system sleep state S3 [12429.751167] ACPI Error: Cannot release Mutex [PATM], not acquired (20150930/exmutex-376) [12429.751172] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECDV._Q66] (Node ffff8802169d4e10), AE_AML_MUTEX_NOT_ACQUIRED (20150930/psparse-542) [12429.885475] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [12429.899538] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [12429.899627] PM: noirq resume of devices complete after 32.441 msecs [12429.903103] PM: early resume of devices complete after 3.453 msecs [12429.905309] rtc_cmos 00:01: System wakeup disabled by ACPI [12429.911848] sd 3:0:0:0: [sda] Starting disk [12429.983901] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [12429.998944] xhci_hcd 0000:00:14.0: port 2 resume PLC timeout [12430.223028] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [12430.225133] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [12430.225418] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [12430.225454] ata4.00: configured for UDMA/133 [12430.227153] usb 2-3: reset full-speed USB device number 2 using xhci_hcd [12430.467288] usb 2-5: reset high-speed USB device number 4 using xhci_hcd [12430.819257] usb 2-4: reset full-speed USB device number 3 using xhci_hcd [12430.947850] usb 2-4: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes [12430.962968] PM: resume of devices complete after 1059.878 msecs [12430.963693] PM: Finishing wakeup. [12430.963695] Restarting tasks ... done. [12430.968190] pci_bus 0000:01: Allocating resources [12430.968324] pci_bus 0000:02: Allocating resources [12430.968371] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12430.968622] pci_bus 0000:01: Allocating resources [12430.968749] pci_bus 0000:02: Allocating resources [12430.968793] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12430.978346] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12430.978484] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12430.983504] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12430.983914] pci_bus 0000:01: Allocating resources [12430.984041] pci_bus 0000:02: Allocating resources [12430.984085] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12430.984850] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12430.984933] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12430.985055] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12430.985073] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12430.985090] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12430.985208] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12430.996796] cfg80211: World regulatory domain updated: [12430.996800] cfg80211: DFS Master region: unset [12430.996801] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [12430.996805] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [12430.996808] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [12430.996811] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [12430.996814] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [12430.996816] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [12430.996819] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [12430.996821] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [12430.996824] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [12431.060518] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [12431.093074] Bluetooth: hci0: BCM: chip id 63 [12431.109068] Bluetooth: hci0: BCM20702A [12431.110065] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 [12431.110087] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-216f.hcd failed with error -2 [12431.110090] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-216f.hcd not found [12431.247926] [drm:intel_dp_link_training_channel_equalization [i915]] *ERROR* 5.4 Gbps link rate without HBR2/TPS3 support [12594.904199] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12594.964226] cfg80211: World regulatory domain updated: [12594.964231] cfg80211: DFS Master region: unset [12594.964233] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [12594.964236] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [12594.964239] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [12594.964242] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [12594.964245] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [12594.964248] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [12594.964251] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [12594.964253] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [12594.964256] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [12596.362881] PM: Syncing filesystems ... done. [12596.397242] PM: Preparing system for sleep (mem) [12596.397543] Freezing user space processes ... (elapsed 0.002 seconds) done. [12596.400329] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [12596.401634] PM: Suspending system (mem) [12596.401651] Suspending console(s) (use no_console_suspend to debug) [12596.402799] sd 3:0:0:0: [sda] Synchronizing SCSI cache [12596.404929] sd 3:0:0:0: [sda] Stopping disk [12596.410394] ERROR @wl_notify_scan_status : wlp2s0 Scan_results error (-22) [12596.544400] PM: suspend of devices complete after 142.587 msecs [12596.564603] PM: late suspend of devices complete after 20.184 msecs [12596.565229] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [12596.565356] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [12596.580734] PM: noirq suspend of devices complete after 16.127 msecs [12596.581006] ACPI: Preparing to enter system sleep state S3 [12596.604576] ACPI : EC: EC stopped [12596.604577] PM: Saving platform NVS memory [12596.604598] Disabling non-boot CPUs ... [12596.604850] Broke affinity for irq 46 [12596.605871] smpboot: CPU 1 is now offline [12596.617082] Broke affinity for irq 19 [12596.617099] Broke affinity for irq 42 [12596.617117] Broke affinity for irq 46 [12596.618185] smpboot: CPU 2 is now offline [12596.629354] Broke affinity for irq 1 [12596.629359] Broke affinity for irq 6 [12596.629363] Broke affinity for irq 7 [12596.629367] Broke affinity for irq 8 [12596.629371] Broke affinity for irq 9 [12596.629375] Broke affinity for irq 12 [12596.629380] Broke affinity for irq 19 [12596.629384] Broke affinity for irq 21 [12596.629390] Broke affinity for irq 39 [12596.629395] Broke affinity for irq 42 [12596.629398] Broke affinity for irq 43 [12596.629402] Broke affinity for irq 44 [12596.629410] Broke affinity for irq 46 [12596.629415] Broke affinity for irq 47 [12596.630463] smpboot: CPU 3 is now offline [12596.646783] ACPI: Low-level resume complete [12596.646837] ACPI : EC: EC started [12596.646838] PM: Restoring platform NVS memory [12596.649074] microcode: CPU0 microcode updated early to revision 0x2a, date = 2018-01-18 [12596.649135] Enabling non-boot CPUs ... [12596.666646] x86: Booting SMP configuration: [12596.666647] smpboot: Booting Node 0 Processor 1 APIC 0x2 [12596.667956] microcode: CPU1 microcode updated early to revision 0x2a, date = 2018-01-18 [12596.671200] cache: parent cpu1 should not be sleeping [12596.671348] CPU1 is up [12596.690696] smpboot: Booting Node 0 Processor 2 APIC 0x1 [12596.694185] cache: parent cpu2 should not be sleeping [12596.694335] CPU2 is up [12596.710634] smpboot: Booting Node 0 Processor 3 APIC 0x3 [12596.714197] cache: parent cpu3 should not be sleeping [12596.714308] CPU3 is up [12596.717767] ACPI: Waking up from system sleep state S3 [12597.590934] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [12597.600657] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [12597.600753] PM: noirq resume of devices complete after 18.030 msecs [12597.606682] PM: early resume of devices complete after 5.909 msecs [12597.608718] rtc_cmos 00:01: System wakeup disabled by ACPI [12597.609793] sd 3:0:0:0: [sda] Starting disk [12597.687036] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [12597.702126] xhci_hcd 0000:00:14.0: port 2 resume PLC timeout [12597.926492] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [12597.926767] usb 2-4: reset full-speed USB device number 3 using xhci_hcd [12597.928532] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [12597.928798] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [12597.928833] ata4.00: configured for UDMA/133 [12598.055195] usb 2-4: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes [12598.166731] usb 2-3: reset full-speed USB device number 2 using xhci_hcd [12598.406749] usb 2-5: reset high-speed USB device number 4 using xhci_hcd [12598.618301] PM: resume of devices complete after 1011.631 msecs [12598.618900] PM: Finishing wakeup. [12598.618901] Restarting tasks ... [12598.619405] pci_bus 0000:01: Allocating resources [12598.619491] pci_bus 0000:02: Allocating resources [12598.619537] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12598.619812] pci_bus 0000:01: Allocating resources [12598.619941] pci_bus 0000:02: Allocating resources [12598.619984] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12598.620072] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12598.620188] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12598.620280] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12598.620683] pci_bus 0000:01: Allocating resources [12598.620813] pci_bus 0000:02: Allocating resources [12598.620857] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12598.621719] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12598.621817] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12598.621957] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12598.621979] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12598.622000] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12598.622130] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [12598.634218] done. [12598.670020] cfg80211: World regulatory domain updated: [12598.670025] cfg80211: DFS Master region: unset [12598.670026] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [12598.670030] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [12598.670033] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [12598.670036] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [12598.670039] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [12598.670042] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [12598.670045] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [12598.670048] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [12598.670050] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [12598.708992] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [12598.760529] Bluetooth: hci0: BCM: chip id 63 [12598.776553] Bluetooth: hci0: BCM20702A [12598.777545] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 [12598.777580] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-216f.hcd failed with error -2 [12598.777583] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-216f.hcd not found [12598.860229] [drm:intel_dp_link_training_channel_equalization [i915]] *ERROR* 5.4 Gbps link rate without HBR2/TPS3 support