lirc ITE8713 not working

[Stefan Pappalardo]

On Zotac ZBOX NANO AQ01 remote control with in build ir receiver does not work.

$ irw # gives not output at all
$ mode2 -d /dev/lirc0 # gives output
$ sudo dpkg-reconfigure lirc # Windows Media Center Transceivers/Remotes (all) chosen

$ sudo systemctl status lirc
● lirc.service - LSB: Starts LIRC daemon.
   Loaded: loaded (/etc/init.d/lirc; generated)
   Active: active (running) since Sun 2019-02-24 00:48:21 CET; 17min ago
     Docs: man:systemd-sysv-generator(8)
  Process: 6693 ExecStart=/etc/init.d/lirc start (code=exited, status=0/SUCCESS)
    Tasks: 1 (limit: 3976)
   CGroup: /system.slice/lirc.service
           └─6706 /usr/sbin/lircd --output=/run/lirc/lircd --device=/dev/lirc0

Feb 24 00:48:21 keksdose systemd[1]: Starting LSB: Starts LIRC daemon....
Feb 24 00:48:21 keksdose lirc[6693]: * Loading LIRC modules
Feb 24 00:48:21 keksdose lirc[6693]: ...done.
Feb 24 00:48:21 keksdose lirc[6693]: * Starting remote control daemon(s) :
Feb 24 00:48:21 keksdose lircd-0.9.0[6706]: lircd(default) ready, using /run/lirc/lircd
Feb 24 00:48:21 keksdose lirc[6693]: ...done.
Feb 24 00:48:21 keksdose systemd[1]: Started LSB: Starts LIRC daemon..
Feb 24 00:48:24 keksdose lircd-0.9.0[6706]: accepted new client on /run/lirc/lircd
Feb 24 00:48:50 keksdose lircd-0.9.0[6706]: removed client

$ sudo ir-keytable
Found /sys/class/rc/rc0/ (/dev/input/event4) with:
 Name: ITE8713 CIR transceiver
 Driver: ite-cir, table: rc-rc6-mce
 lirc device: /dev/lirc0
 Supported protocols: lirc rc-5 rc-5-sz jvc sony nec sanyo mce_kbd rc-6 sharp xmp
 Enabled protocols: lirc
 bus: 25, vendor/product: 1283:0000, version: 0x0000
 Repeat delay = 500 ms, repeat period = 125 ms

[Alec Leamas (leamas-alec)]

[sorry for late walking through bugs]

Have you tried the installation instructions as described in the upstream docs[1] ?

[1] https://www.lirc.org/html/configuration-guide.html