luca@luca-desktop:~$ uname -r 3.5.0-19-generic luca@luca-desktop:~$ cat /proc/cmdline BOOT_IMAGE=/vmlinuz-3.5.0-19-generic root=UUID=f5d18141-1192-4ba1-91ea-15445600f4ad ro quiet splash apm=off vt.handoff=7 luca@luca-desktop:~$ cat /proc/interrupts CPU0 0: 297034 IO-APIC-edge timer 1: 9 IO-APIC-edge i8042 5: 0 IO-APIC-edge MPU401 UART 6: 3 IO-APIC-edge floppy 7: 0 IO-APIC-edge parport0 8: 0 IO-APIC-edge rtc0 9: 0 IO-APIC-fasteoi acpi 14: 12325 IO-APIC-edge pata_via 15: 5061 IO-APIC-edge pata_via 16: 303 IO-APIC-fasteoi radeon 18: 405523 IO-APIC-fasteoi eth1 21: 1168 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, uhci_hcd:usb4 22: 0 IO-APIC-fasteoi snd_via82xx NMI: 8 Non-maskable interrupts LOC: 33038 Local timer interrupts SPU: 0 Spurious interrupts PMI: 8 Performance monitoring interrupts IWI: 0 IRQ work interrupts RTR: 0 APIC ICR read retries RES: 0 Rescheduling interrupts CAL: 0 Function call interrupts TLB: 0 TLB shootdowns TRM: 0 Thermal event interrupts THR: 0 Threshold APIC interrupts MCE: 0 Machine check exceptions MCP: 7 Machine check polls ERR: 0 MIS: 0 luca@luca-desktop:~$ dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.5.0-19-generic (buildd@aatxe) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #30-Ubuntu SMP Tue Nov 13 17:49:53 UTC 2012 (Ubuntu 3.5.0-19.30-generic 3.5.7) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000002ffeffff] usable [ 0.000000] BIOS-e820: [mem 0x000000002fff0000-0x000000002fff2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000002fff3000-0x000000002fffffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: /GA-7VAX, BIOS F9 01/14/2003 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x2fff0 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-AFFFF uncachable [ 0.000000] B0000-BFFFF write-combining [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 base 020000000 mask FF0000000 write-back [ 0.000000] 2 base 0D0000000 mask FF8000000 write-combining [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 base 0D0000000 mask FF8000000 write-combining [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [mem 0x000f4bb0-0x000f4bbf] mapped at [c00f4bb0] [ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x2ffeffff] [ 0.000000] [mem 0x00000000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x2fdfffff] page 2M [ 0.000000] [mem 0x2fe00000-0x2ffeffff] page 4k [ 0.000000] kernel direct mapping tables up to 0x2ffeffff @ [mem 0x01ffa000-0x01ffffff] [ 0.000000] RAMDISK: [mem 0x2e0a6000-0x2f59afff] [ 0.000000] ACPI: RSDP 000f6520 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 2fff3000 0002C (v01 GBT AWRDACPI 42302E31 AWRD 01010101) [ 0.000000] ACPI: FACP 2fff3040 00074 (v01 GBT AWRDACPI 42302E31 AWRD 01010101) [ 0.000000] ACPI: DSDT 2fff30c0 039DC (v01 GBT AWRDACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 2fff0000 00040 [ 0.000000] ACPI: APIC 2fff6ac0 0005A (v01 GBT AWRDACPI 42302E31 AWRD 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 767MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 2fff0000 [ 0.000000] low ram: 0 - 2fff0000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x2ffeffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x2ffeffff] [ 0.000000] On node 0 totalpages: 196479 [ 0.000000] free_area_init_node: node 0, pgdat c18a2840, node_mem_map ef9ef200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1504 pages used for memmap [ 0.000000] Normal zone: 190992 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] e820: [mem 0x30000000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @ef9db000 s34176 r0 d23168 u57344 [ 0.000000] pcpu-alloc: s34176 r0 d23168 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194943 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.5.0-19-generic root=UUID=f5d18141-1192-4ba1-91ea-15445600f4ad ro quiet splash apm=off vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 1572608 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 745276k/786368k available (5961k kernel code, 40640k reserved, 2932k data, 756k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff15000 - 0xfffff000 ( 936 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf07f0000 - 0xffbfe000 ( 244 MB) [ 0.000000] lowmem : 0xc0000000 - 0xefff0000 ( 767 MB) [ 0.000000] .init : 0xc18b0000 - 0xc196d000 ( 756 kB) [ 0.000000] .data : 0xc15d2598 - 0xc18af6c0 (2932 kB) [ 0.000000] .text : 0xc1000000 - 0xc15d2598 (5961 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 [ 0.000000] CPU 0 irqstacks, hard=edc08000 soft=edc0a000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2086.482 MHz processor. [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4172.96 BogoMIPS (lpj=8345928) [ 0.004008] pid_max: default: 32768 minimum: 301 [ 0.004049] Security Framework initialized [ 0.004088] AppArmor: AppArmor initialized [ 0.004090] Yama: becoming mindful. [ 0.004172] Mount-cache hash table entries: 512 [ 0.004486] Initializing cgroup subsys cpuacct [ 0.004490] Initializing cgroup subsys memory [ 0.004504] Initializing cgroup subsys devices [ 0.004507] Initializing cgroup subsys freezer [ 0.004509] Initializing cgroup subsys blkio [ 0.004512] Initializing cgroup subsys perf_event [ 0.004555] mce: CPU supports 4 MCE banks [ 0.004632] SMP alternatives: switching to UP code [ 0.015166] Freeing SMP alternatives: 24k freed [ 0.015210] ACPI: Core revision 20120320 [ 0.020192] ftrace: allocating 24599 entries in 49 pages [ 0.032145] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.037179] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.076880] CPU0: AMD Athlon(tm) XP 2800+ stepping 00 [ 0.080004] Performance Events: AMD PMU driver. [ 0.080004] ... version: 0 [ 0.080004] ... bit width: 48 [ 0.080004] ... generic registers: 4 [ 0.080004] ... value mask: 0000ffffffffffff [ 0.080004] ... max period: 00007fffffffffff [ 0.080004] ... fixed-purpose events: 0 [ 0.080004] ... event mask: 000000000000000f [ 0.080004] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.080004] Brought up 1 CPUs [ 0.080004] Total of 1 processors activated (4172.96 BogoMIPS). [ 0.080004] devtmpfs: initialized [ 0.080004] EVM: security.selinux [ 0.080004] EVM: security.SMACK64 [ 0.080004] EVM: security.capability [ 0.080004] PM: Registering ACPI NVS region [mem 0x2fff0000-0x2fff2fff] (12288 bytes) [ 0.080004] dummy: [ 0.080004] RTC time: 11:48:53, date: 12/14/12 [ 0.080004] NET: Registered protocol family 16 [ 0.080004] EISA bus registered [ 0.080004] ACPI: bus type pci registered [ 0.087205] PCI: PCI BIOS revision 2.10 entry at 0xf9d60, last bus=1 [ 0.087207] PCI: Using configuration type 1 for base access [ 0.088777] bio: create slab at 0 [ 0.088917] ACPI: Added _OSI(Module Device) [ 0.088920] ACPI: Added _OSI(Processor Device) [ 0.088923] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.088925] ACPI: Added _OSI(Processor Aggregator Device) [ 0.089496] ACPI: EC: Look up EC in DSDT [ 0.092615] ACPI: Interpreter enabled [ 0.092624] ACPI: (supports S0 S1 S4 S5) [ 0.092648] ACPI: Using IOAPIC for interrupt routing [ 0.096484] ACPI: No dock devices found. [ 0.096493] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.096572] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.096671] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.096675] pci_root PNP0A03:00: host bridge window [io 0x0d00-0x3fff] (ignored) [ 0.096679] pci_root PNP0A03:00: host bridge window [io 0x4100-0x4fff] (ignored) [ 0.096681] pci_root PNP0A03:00: host bridge window [io 0x5010-0xffff] (ignored) [ 0.096684] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.096687] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) [ 0.096691] pci_root PNP0A03:00: host bridge window [mem 0x30000000-0xfebfffff] (ignored) [ 0.096693] PCI: root bus 00: using default resources [ 0.096746] PCI host bridge to bus 0000:00 [ 0.096750] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.096754] pci_bus 0000:00: root bus resource [mem 0x00000000-0x3ffffffff] [ 0.096774] pci 0000:00:00.0: [1106:3189] type 00 class 0x060000 [ 0.096787] pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref] [ 0.096855] pci 0000:00:01.0: [1106:b168] type 01 class 0x060400 [ 0.096895] pci 0000:00:01.0: supports D1 [ 0.096920] pci 0000:00:0a.0: [1813:4000] type 00 class 0x078000 [ 0.096935] pci 0000:00:0a.0: reg 10: [mem 0xe2000000-0xe2000fff] [ 0.096944] pci 0000:00:0a.0: reg 14: [io 0xd000-0xd0ff] [ 0.096995] pci 0000:00:0a.0: supports D2 [ 0.096998] pci 0000:00:0a.0: PME# supported from D2 D3hot D3cold [ 0.097016] pci 0000:00:0b.0: [10ec:8029] type 00 class 0x020000 [ 0.097028] pci 0000:00:0b.0: reg 10: [io 0xd400-0xd41f] [ 0.097090] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300 [ 0.097128] pci 0000:00:10.0: reg 20: [io 0xd800-0xd81f] [ 0.097162] pci 0000:00:10.0: supports D1 D2 [ 0.097164] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.097187] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300 [ 0.097224] pci 0000:00:10.1: reg 20: [io 0xdc00-0xdc1f] [ 0.097258] pci 0000:00:10.1: supports D1 D2 [ 0.097261] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.097280] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300 [ 0.097318] pci 0000:00:10.2: reg 20: [io 0xe000-0xe01f] [ 0.097352] pci 0000:00:10.2: supports D1 D2 [ 0.097355] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.097374] pci 0000:00:10.3: [1106:3104] type 00 class 0x0c0320 [ 0.097389] pci 0000:00:10.3: reg 10: [mem 0xe2001000-0xe20010ff] [ 0.097446] pci 0000:00:10.3: supports D1 D2 [ 0.097449] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.097473] pci 0000:00:11.0: [1106:3177] type 00 class 0x060100 [ 0.097525] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.097533] pci 0000:00:11.0: quirk: [io 0x4000-0x407f] claimed by vt8235 PM [ 0.097538] pci 0000:00:11.0: quirk: [io 0x5000-0x500f] claimed by vt8235 SMB [ 0.097575] pci 0000:00:11.1: [1106:0571] type 00 class 0x01018a [ 0.097616] pci 0000:00:11.1: reg 20: [io 0xe400-0xe40f] [ 0.097672] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100 [ 0.097687] pci 0000:00:11.5: reg 10: [io 0xe800-0xe8ff] [ 0.097748] pci 0000:00:11.5: supports D1 D2 [ 0.097769] pci 0000:00:13.0: [10ec:8139] type 00 class 0x020000 [ 0.097784] pci 0000:00:13.0: reg 10: [io 0xec00-0xecff] [ 0.097793] pci 0000:00:13.0: reg 14: [mem 0xe2002000-0xe20020ff] [ 0.097846] pci 0000:00:13.0: supports D1 D2 [ 0.097849] pci 0000:00:13.0: PME# supported from D1 D2 D3hot D3cold [ 0.097898] pci 0000:01:00.0: [1002:5159] type 00 class 0x030000 [ 0.097913] pci 0000:01:00.0: reg 10: [mem 0xd8000000-0xdfffffff pref] [ 0.097920] pci 0000:01:00.0: reg 14: [io 0xc000-0xc0ff] [ 0.097928] pci 0000:01:00.0: reg 18: [mem 0xe1000000-0xe100ffff] [ 0.097951] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.097977] pci 0000:01:00.0: supports D1 D2 [ 0.098007] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.098012] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.098017] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe1ffffff] [ 0.098022] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff pref] [ 0.098029] pci_bus 0000:00: on NUMA node 0 [ 0.098033] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.098266] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e) [ 0.111151] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) [ 0.111257] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) [ 0.111365] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) [ 0.111470] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) [ 0.111569] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0 [ 0.111663] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0 [ 0.111775] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0 [ 0.111869] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0 [ 0.112042] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.112044] vgaarb: loaded [ 0.112046] vgaarb: bridge control possible 0000:01:00.0 [ 0.112378] SCSI subsystem initialized [ 0.112472] libata version 3.00 loaded. [ 0.112513] ACPI: bus type usb registered [ 0.112559] usbcore: registered new interface driver usbfs [ 0.112573] usbcore: registered new interface driver hub [ 0.112612] usbcore: registered new device driver usb [ 0.112759] PCI: Using ACPI for IRQ routing [ 0.112764] PCI: pci_cache_line_size set to 32 bytes [ 0.112816] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.112820] e820: reserve RAM buffer [mem 0x2fff0000-0x2fffffff] [ 0.112976] NetLabel: Initializing [ 0.112979] NetLabel: domain hash size = 128 [ 0.112980] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.112998] NetLabel: unlabeled traffic allowed by default [ 0.125361] AppArmor: AppArmor Filesystem Enabled [ 0.125428] pnp: PnP ACPI init [ 0.125462] ACPI: bus type pnp registered [ 0.125768] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.125846] pnp 00:01: [bus 00-ff] [ 0.125851] pnp 00:01: [io 0x0cf8-0x0cff] [ 0.125855] pnp 00:01: [io 0x0000-0x0cf7 window] [ 0.125858] pnp 00:01: [io 0x0d00-0x3fff window] [ 0.125861] pnp 00:01: [io 0x4000-0x407f] [ 0.125863] pnp 00:01: [io 0x4080-0x40ff] [ 0.125866] pnp 00:01: [io 0x4100-0x4fff window] [ 0.125869] pnp 00:01: [io 0x5000-0x500f] [ 0.125871] pnp 00:01: [io 0x5010-0xffff window] [ 0.125875] pnp 00:01: [mem 0x000a0000-0x000bffff window] [ 0.125878] pnp 00:01: [mem 0x000c0000-0x000dffff window] [ 0.125881] pnp 00:01: [mem 0x30000000-0xfebfffff window] [ 0.125943] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.126166] pnp 00:02: [io 0x0010-0x001f] [ 0.126169] pnp 00:02: [io 0x0022-0x003f] [ 0.126172] pnp 00:02: [io 0x0044-0x005f] [ 0.126175] pnp 00:02: [io 0x0062-0x0063] [ 0.126177] pnp 00:02: [io 0x0065-0x006f] [ 0.126180] pnp 00:02: [io 0x0074-0x007f] [ 0.126190] pnp 00:02: [io 0x0091-0x0093] [ 0.126193] pnp 00:02: [io 0x00a2-0x00bf] [ 0.126195] pnp 00:02: [io 0x00e0-0x00ef] [ 0.126198] pnp 00:02: [io 0x04d0-0x04d1] [ 0.126201] pnp 00:02: [io 0x0290-0x029f] [ 0.126203] pnp 00:02: [io 0x0800-0x0805] [ 0.126260] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.126264] system 00:02: [io 0x0290-0x029f] has been reserved [ 0.126268] system 00:02: [io 0x0800-0x0805] has been reserved [ 0.126272] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.126290] pnp 00:03: [dma 4] [ 0.126294] pnp 00:03: [io 0x0000-0x000f] [ 0.126296] pnp 00:03: [io 0x0080-0x0090] [ 0.126299] pnp 00:03: [io 0x0094-0x009f] [ 0.126302] pnp 00:03: [io 0x00c0-0x00df] [ 0.126335] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.126351] pnp 00:04: [io 0x0070-0x0073] [ 0.126374] pnp 00:04: [irq 8] [ 0.126416] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.126430] pnp 00:05: [io 0x0061] [ 0.126464] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.126480] pnp 00:06: [io 0x00f0-0x00ff] [ 0.126488] pnp 00:06: [irq 13] [ 0.126522] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.126671] pnp 00:07: [io 0x03f0-0x03f5] [ 0.126674] pnp 00:07: [io 0x03f7] [ 0.126682] pnp 00:07: [irq 6] [ 0.126685] pnp 00:07: [dma 2] [ 0.126747] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.126942] pnp 00:08: [io 0x03f8-0x03ff] [ 0.126949] pnp 00:08: [irq 4] [ 0.127020] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.127230] pnp 00:09: [io 0x02f8-0x02ff] [ 0.127237] pnp 00:09: [irq 3] [ 0.127310] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.127591] pnp 00:0a: [io 0x0378-0x037f] [ 0.127598] pnp 00:0a: [irq 7] [ 0.127663] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.127776] pnp 00:0b: [io 0x0060] [ 0.127780] pnp 00:0b: [io 0x0064] [ 0.127786] pnp 00:0b: [irq 1] [ 0.127832] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.128076] pnp 00:0c: [io 0x0330-0x0331] [ 0.128084] pnp 00:0c: [irq 5] [ 0.128138] pnp 00:0c: Plug and Play ACPI device, IDs PNPb006 (active) [ 0.128315] pnp 00:0d: [io 0x0201] [ 0.128362] pnp 00:0d: Plug and Play ACPI device, IDs PNPb02f (active) [ 0.128370] pnp: PnP ACPI: found 14 devices [ 0.128372] ACPI: ACPI bus type pnp unregistered [ 0.128377] PnPBIOS: Disabled by ACPI PNP [ 0.165200] Switching to clocksource acpi_pm [ 0.165253] pci 0000:01:00.0: BAR 6: assigned [mem 0xe0000000-0xe001ffff pref] [ 0.165259] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.165264] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.165270] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe1ffffff] [ 0.165275] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff pref] [ 0.165290] pci 0000:00:01.0: setting latency timer to 64 [ 0.165295] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.165299] pci_bus 0000:00: resource 5 [mem 0x00000000-0x3ffffffff] [ 0.165302] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.165305] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe1ffffff] [ 0.165308] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff pref] [ 0.165378] NET: Registered protocol family 2 [ 0.165461] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.165864] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.167816] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.167816] TCP: Hash tables configured (established 131072 bind 65536) [ 0.167816] TCP: reno registered [ 0.167816] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.167816] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.167888] NET: Registered protocol family 1 [ 0.167916] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.168222] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21 [ 0.168226] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 [ 0.168364] pci 0000:01:00.0: Boot video device [ 0.168368] PCI: CLS 32 bytes, default 32 [ 0.169047] audit: initializing netlink socket (disabled) [ 0.169066] type=2000 audit(1355485733.164:1): initialized [ 0.193926] Trying to unpack rootfs image as initramfs... [ 0.224703] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.230412] VFS: Disk quotas dquot_6.5.2 [ 0.230488] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.236411] fuse init (API version 7.19) [ 0.236589] msgmni has been set to 1455 [ 0.248531] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.252266] io scheduler noop registered [ 0.252276] io scheduler deadline registered (default) [ 0.252327] io scheduler cfq registered [ 0.252540] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.252577] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.252782] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.252791] ACPI: Power Button [PWRB] [ 0.252851] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.252855] ACPI: Power Button [PWRF] [ 0.252935] Marking TSC unstable due to TSC halts in idle [ 0.252944] ACPI: acpi_idle registered with cpuidle [ 0.255654] GHES: HEST is not enabled! [ 0.255839] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.276190] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.276221] isapnp: Scanning for PnP cards... [ 0.364727] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.409121] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.492870] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.512473] Linux agpgart interface v0.103 [ 0.512562] agpgart: Detected VIA KT400/KT400A/KT600 chipset [ 0.572490] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xd0000000 [ 0.577346] brd: module loaded [ 0.578379] loop: module loaded [ 0.578948] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20 [ 0.578951] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 [ 0.579532] Fixed MDIO Bus: probed [ 0.579614] tun: Universal TUN/TAP device driver, 1.6 [ 0.579616] tun: (C) 1999-2004 Max Krasnyansky [ 0.584318] PPP generic driver version 2.4.2 [ 0.584429] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.584529] ehci_hcd 0000:00:10.3: EHCI Host Controller [ 0.584549] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1 [ 0.584650] ehci_hcd 0000:00:10.3: irq 21, io mem 0xe2001000 [ 0.596252] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00 [ 0.596328] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.596331] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.596335] usb usb1: Product: EHCI Host Controller [ 0.596338] usb usb1: Manufacturer: Linux 3.5.0-19-generic ehci_hcd [ 0.596340] usb usb1: SerialNumber: 0000:00:10.3 [ 0.596544] hub 1-0:1.0: USB hub found [ 0.596556] hub 1-0:1.0: 6 ports detected [ 0.596670] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.596712] uhci_hcd: USB Universal Host Controller Interface driver [ 0.596786] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 0.596797] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 0.596830] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d800 [ 0.596885] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.596888] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.596891] usb usb2: Product: UHCI Host Controller [ 0.596893] usb usb2: Manufacturer: Linux 3.5.0-19-generic uhci_hcd [ 0.596896] usb usb2: SerialNumber: 0000:00:10.0 [ 0.597023] hub 2-0:1.0: USB hub found [ 0.597030] hub 2-0:1.0: 2 ports detected [ 0.597103] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 0.597111] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 0.597132] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000dc00 [ 0.597183] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.597187] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.597189] usb usb3: Product: UHCI Host Controller [ 0.597192] usb usb3: Manufacturer: Linux 3.5.0-19-generic uhci_hcd [ 0.597195] usb usb3: SerialNumber: 0000:00:10.1 [ 0.597308] hub 3-0:1.0: USB hub found [ 0.597314] hub 3-0:1.0: 2 ports detected [ 0.597385] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 0.597392] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 0.597413] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e000 [ 0.597463] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.597467] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.597469] usb usb4: Product: UHCI Host Controller [ 0.597472] usb usb4: Manufacturer: Linux 3.5.0-19-generic uhci_hcd [ 0.597474] usb usb4: SerialNumber: 0000:00:10.2 [ 0.597586] hub 4-0:1.0: USB hub found [ 0.597592] hub 4-0:1.0: 2 ports detected [ 0.597728] usbcore: registered new interface driver libusual [ 0.597789] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.597792] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.597967] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.598107] mousedev: PS/2 mouse device common for all mice [ 0.598289] rtc_cmos 00:04: RTC can wake from S4 [ 0.598455] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.598504] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.598585] device-mapper: uevent: version 1.0.3 [ 0.598670] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.598706] EISA: Probing bus 0 at eisa.0 [ 0.598732] Cannot allocate resource for EISA slot 4 [ 0.598734] Cannot allocate resource for EISA slot 5 [ 0.598750] EISA: Detected 0 cards. [ 0.598784] cpuidle: using governor ladder [ 0.598810] cpuidle: using governor menu [ 0.598812] EFI Variables Facility v0.08 2004-May-17 [ 0.602861] ashmem: initialized [ 0.603047] TCP: cubic registered [ 0.603199] NET: Registered protocol family 10 [ 0.603485] NET: Registered protocol family 17 [ 0.603507] Key type dns_resolver registered [ 0.603602] Using IPI No-Shortcut mode [ 0.603707] PM: Hibernation image not present or could not be loaded. [ 0.603731] registered taskstats version 1 [ 0.623554] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.927671] usb 1-3: new high-speed USB device number 2 using ehci_hcd [ 0.995599] isapnp: No Plug & Play device found [ 1.082938] usb 1-3: New USB device found, idVendor=1058, idProduct=1010 [ 1.082946] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.082950] usb 1-3: Product: External HDD [ 1.082953] usb 1-3: Manufacturer: Western Digital [ 1.082955] usb 1-3: SerialNumber: 57442D575837314131303935373434 [ 1.237134] Freeing initrd memory: 21460k freed [ 1.278352] Initializing USB Mass Storage driver... [ 1.280295] scsi0 : usb-storage 1-3:1.0 [ 1.280455] usbcore: registered new interface driver usb-storage [ 1.280458] USB Mass Storage support registered. [ 1.280671] Key type trusted registered [ 1.283809] Key type encrypted registered [ 1.287228] Magic number: 8:43:833 [ 1.287420] rtc_cmos 00:04: setting system clock to 2012-12-14 11:48:55 UTC (1355485735) [ 1.287520] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.287522] EDD information not available. [ 1.287691] Freeing unused kernel memory: 756k freed [ 1.288983] Write protecting the kernel text: 5964k [ 1.289005] Write protecting the kernel read-only data: 2424k [ 1.319867] udevd[90]: starting version 175 [ 1.442557] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker [ 1.442911] eth0: RealTek RTL-8029 found at 0xd400, IRQ 19, 00:40:33:53:dc:88. [ 1.510868] Floppy drive(s): fd0 is 1.44M [ 1.515958] [drm] Initialized drm 1.1.0 20060810 [ 1.527950] FDC 0 is a post-1991 82077 [ 1.550819] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 1.550861] 8139cp 0000:00:13.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 1.551406] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 1.551982] 8139too 0000:00:13.0: eth1: RealTek RTL8139 at 0x0001ec00, 00:20:ed:65:88:68, IRQ 18 [ 1.577244] pata_via 0000:00:11.1: version 0.3.4 [ 1.580909] scsi1 : pata_via [ 1.584205] scsi2 : pata_via [ 1.587121] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe400 irq 14 [ 1.587125] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe408 irq 15 [ 1.595032] [drm] radeon defaulting to kernel modesetting. [ 1.595039] [drm] radeon kernel modesetting enabled. [ 1.614826] [drm] initializing kernel modesetting (RV100 0x1002:0x5159 0x174B:0x7112). [ 1.614863] [drm] register mmio base: 0xE1000000 [ 1.614865] [drm] register mmio size: 65536 [ 1.615543] agpgart-via 0000:00:00.0: AGP 2.0 bridge [ 1.615558] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode [ 1.615608] radeon 0000:01:00.0: putting AGP V2 device into 4x mode [ 1.615613] radeon 0000:01:00.0: GTT: 128M 0xD0000000 - 0xD7FFFFFF [ 1.615622] radeon 0000:01:00.0: VRAM: 128M 0x00000000D8000000 - 0x00000000DFFFFFFF (64M used) [ 1.615632] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 1.615634] [drm] Driver supports precise vblank timestamp query. [ 1.618504] [drm] radeon: irq initialized. [ 1.618834] [drm] Detected VRAM RAM=128M, BAR=128M [ 1.618842] [drm] RAM width 64bits SDR [ 1.622051] [TTM] Zone kernel: Available graphics memory: 383758 kiB [ 1.622054] [TTM] Initializing pool allocator [ 1.622061] [TTM] Initializing DMA pool allocator [ 1.622100] [drm] radeon: 64M of VRAM memory ready [ 1.622103] [drm] radeon: 128M of GTT memory ready. [ 1.664580] radeon 0000:01:00.0: WB disabled [ 1.664595] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000d0000000 and cpu addr 0xf0806000 [ 1.665434] [drm] Loading R100 Microcode [ 1.668434] [drm] radeon: ring at 0x00000000D0001000 [ 1.668460] [drm] ring test succeeded in 0 usecs [ 1.668715] [drm] ib test succeeded in 0 usecs [ 1.669066] [drm] Radeon Display Connectors [ 1.669068] [drm] Connector 0: [ 1.669071] [drm] VGA-1 [ 1.669074] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 1.669075] [drm] Encoders: [ 1.669077] [drm] CRT1: INTERNAL_DAC1 [ 1.669078] [drm] Connector 1: [ 1.669080] [drm] DVI-I-1 [ 1.669081] [drm] HPD1 [ 1.669084] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 1.669085] [drm] Encoders: [ 1.669086] [drm] CRT2: INTERNAL_DAC2 [ 1.669087] [drm] DFP1: INTERNAL_TMDS1 [ 1.669089] [drm] Connector 2: [ 1.669090] [drm] SVIDEO-1 [ 1.669091] [drm] Encoders: [ 1.669093] [drm] TV1: INTERNAL_DAC2 [ 1.734816] [drm] fb mappable at 0xD8040000 [ 1.734822] [drm] vram apper at 0xD8000000 [ 1.734824] [drm] size 3145728 [ 1.734825] [drm] fb depth is 24 [ 1.734827] [drm] pitch is 4096 [ 1.735000] fbcon: radeondrmfb (fb0) is primary device [ 1.735424] Console: switching to colour frame buffer device 128x48 [ 1.735459] fb0: radeondrmfb frame buffer device [ 1.735461] drm: registered panic notifier [ 1.735472] [drm] Initialized radeon 2.18.0 20080528 for 0000:01:00.0 on minor 0 [ 1.757655] ata1.00: ATA-6: WDC WD1600JB-00GVA0, 08.02D08, max UDMA/100 [ 1.757660] ata1.00: 312581808 sectors, multi 16: LBA48 [ 1.757869] ata1.01: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133 [ 1.757872] ata1.01: 160086528 sectors, multi 16: LBA [ 1.773504] ata1.00: configured for UDMA/100 [ 1.788380] ata1.01: configured for UDMA/133 [ 1.788576] scsi 1:0:0:0: Direct-Access ATA WDC WD1600JB-00G 08.0 PQ: 0 ANSI: 5 [ 1.789009] sd 1:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.789077] sd 1:0:0:0: [sda] Write Protect is off [ 1.789082] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.789112] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.789855] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 1.797573] sda: sda1 sda2 [ 1.797962] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.798084] scsi 1:0:1:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5 [ 1.798403] sd 1:0:1:0: Attached scsi generic sg1 type 0 [ 1.798698] sd 1:0:1:0: [sdb] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB) [ 1.798760] sd 1:0:1:0: [sdb] Write Protect is off [ 1.798765] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.798793] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.831269] sdb: sdb1 < sdb5 sdb6 sdb7 > sdb4 [ 1.831970] sd 1:0:1:0: [sdb] Attached SCSI disk [ 1.960764] ata2.00: ATAPI: ASUS CD-S500/A, V1.2K, max UDMA/33 [ 1.960771] ata2.01: ATAPI: HL-DT-ST GCE-8320B, 1.01, max MWDMA2 [ 1.968346] ata2.00: configured for UDMA/33 [ 1.984215] ata2.01: configured for MWDMA2 [ 1.984801] scsi 2:0:0:0: CD-ROM ASUS CD-S500/A 1.2K PQ: 0 ANSI: 5 [ 1.986074] sr0: scsi3-mmc drive: 50x/50x cd/rw xa/form2 cdda tray [ 1.986078] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.986613] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.986697] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 1.987240] scsi 2:0:1:0: CD-ROM HL-DT-ST CD-RW GCE-8320B 1.01 PQ: 0 ANSI: 5 [ 1.988518] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 1.988977] sr 2:0:1:0: Attached scsi CD-ROM sr1 [ 1.989070] sr 2:0:1:0: Attached scsi generic sg3 type 5 [ 2.283837] scsi 0:0:0:0: Direct-Access WD 5000BEV External 1.75 PQ: 0 ANSI: 4 [ 2.287115] sd 0:0:0:0: Attached scsi generic sg4 type 0 [ 2.287595] sd 0:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.288097] sd 0:0:0:0: [sdc] Write Protect is off [ 2.288102] sd 0:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 2.288596] sd 0:0:0:0: [sdc] No Caching mode page present [ 2.288600] sd 0:0:0:0: [sdc] Assuming drive cache: write through [ 2.290347] sd 0:0:0:0: [sdc] No Caching mode page present [ 2.290354] sd 0:0:0:0: [sdc] Assuming drive cache: write through [ 4.174026] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null) [ 6.215285] sdc: sdc1 sdc2 [ 6.217450] sd 0:0:0:0: [sdc] No Caching mode page present [ 6.217456] sd 0:0:0:0: [sdc] Assuming drive cache: write through [ 6.217460] sd 0:0:0:0: [sdc] Attached SCSI disk [ 14.418471] Adding 979928k swap on /dev/sdb6. Priority:-1 extents:1 across:979928k [ 14.436504] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.436516] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 14.490099] udevd[359]: starting version 175 [ 14.576646] lp: driver loaded but no devices found [ 14.792329] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 14.907297] EXT4-fs (sdb7): re-mounted. Opts: errors=remount-ro [ 14.969655] parport_pc 00:0a: reported by Plug and Play ACPI [ 14.969706] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 15.034063] type=1400 audit(1355485749.242:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=500 comm="apparmor_parser" [ 15.040706] type=1400 audit(1355485749.250:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=500 comm="apparmor_parser" [ 15.041029] type=1400 audit(1355485749.250:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=500 comm="apparmor_parser" [ 15.098434] lp0: using parport0 (interrupt-driven). [ 15.156114] gameport gameport0: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x201, speed 932kHz [ 15.317769] irda_init() [ 15.317810] NET: Registered protocol family 23 [ 15.364985] kjournald starting. Commit interval 5 seconds [ 15.394514] EXT3-fs (sdb4): using internal journal [ 15.394524] EXT3-fs (sdb4): mounted filesystem with ordered data mode [ 15.439946] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 15.546404] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 15.584484] 8139too 0000:00:13.0: eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 15.778629] ppdev: user-space parallel port driver [ 15.789844] Bluetooth: Core ver 2.16 [ 15.791695] NET: Registered protocol family 31 [ 15.791704] Bluetooth: HCI device and connection manager initialized [ 15.791709] Bluetooth: HCI socket layer initialized [ 15.791711] Bluetooth: L2CAP socket layer initialized [ 15.791727] Bluetooth: SCO socket layer initialized [ 15.828169] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 15.828177] Bluetooth: BNEP filters: protocol multicast [ 15.837258] Bluetooth: RFCOMM TTY layer initialized [ 15.837280] Bluetooth: RFCOMM socket layer initialized [ 15.837282] Bluetooth: RFCOMM ver 1.11 [ 15.879885] type=1400 audit(1355485750.086:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=658 comm="apparmor_parser" [ 15.886901] type=1400 audit(1355485750.094:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=658 comm="apparmor_parser" [ 15.983232] microcode: AMD CPU family 0x6 not supported [ 16.191217] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 [ 16.191224] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [ 16.191626] snd_via82xx 0000:00:11.5: setting latency timer to 64 [ 22.167676] init: failsafe main process (720) killed by TERM signal [ 22.373012] type=1400 audit(1355485756.582:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1067 comm="apparmor_parser" [ 22.373508] type=1400 audit(1355485756.582:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1067 comm="apparmor_parser" [ 22.385262] type=1400 audit(1355485756.594:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1068 comm="apparmor_parser" [ 22.393392] type=1400 audit(1355485756.602:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1068 comm="apparmor_parser" [ 22.393745] type=1400 audit(1355485756.602:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1068 comm="apparmor_parser" [ 22.403723] type=1400 audit(1355485756.610:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1069 comm="apparmor_parser" [ 22.411872] type=1400 audit(1355485756.618:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1069 comm="apparmor_parser" [ 22.413273] type=1400 audit(1355485756.622:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*//sanitized_helper" pid=1069 comm="apparmor_parser" [ 22.422626] type=1400 audit(1355485756.630:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1071 comm="apparmor_parser" [ 22.423571] type=1400 audit(1355485756.630:16): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1071 comm="apparmor_parser" [ 22.777516] init: kdm main process (1122) killed by TERM signal [ 56.056034] usb 4-2: new low-speed USB device number 2 using uhci_hcd [ 56.231964] usb 4-2: New USB device found, idVendor=046d, idProduct=c019 [ 56.231973] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 56.231977] usb 4-2: Product: USB Optical Mouse [ 56.231979] usb 4-2: Manufacturer: Logitech [ 56.322327] usbcore: registered new interface driver usbhid [ 56.322336] usbhid: USB HID core driver [ 56.359375] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:10.2/usb4/4-2/4-2:1.0/input/input3 [ 56.359742] hid-generic 0003:046D:C019.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:10.2-2/input0 [ 59.176077] usb 4-2: USB disconnect, device number 2