[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-24-generic (buildd@yellow) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #37-Ubuntu SMP Wed Apr 25 08:43:22 UTC 2012 (Ubuntu 3.2.0-24.37-generic 3.2.14) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-24-generic root=/dev/mapper/sda2_crypt ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf7b0000 (usable) [ 0.000000] BIOS-e820: 00000000bf7b0000 - 00000000bf7c5400 (reserved) [ 0.000000] BIOS-e820: 00000000bf7c5400 - 00000000bf7e7fb8 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf7e7fb8 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Hewlett-Packard HP Compaq 6710b (KE124EA#ABD)/30C0, BIOS 68DDU Ver. F.15 01/15/2009 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 100000000 mask FC0000000 write-back [ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable [ 0.000000] 4 base 0FEDA0000 mask FFFFE0000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 4GB, range: 1GB, type WB [ 0.000000] reg 3, base: 3064MB, range: 8MB, type UC [ 0.000000] reg 4, base: 4175488KB, range: 128KB, type UC [ 0.000000] total RAM covered: 4088M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 4 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3064MB, range: 8MB, type UC [ 0.000000] reg 3, base: 4GB, range: 1GB, type WB [ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbf7b0 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf7b0000 [ 0.000000] 0000000000 - 00bf600000 page 2M [ 0.000000] 00bf600000 - 00bf7b0000 page 4k [ 0.000000] kernel direct mapping tables up to bf7b0000 @ 1fffb000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000 [ 0.000000] 0100000000 - 0140000000 page 2M [ 0.000000] kernel direct mapping tables up to 140000000 @ bf7aa000-bf7b0000 [ 0.000000] RAMDISK: 35f00000 - 36f78000 [ 0.000000] ACPI: RSDP 00000000000f72c0 00024 (v02 HP ) [ 0.000000] ACPI: XSDT 00000000bf7c81cc 00084 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: FACP 00000000bf7c8084 000F4 (v04 HP 30C0 00000003 HP 00000001) [ 0.000000] ACPI: DSDT 00000000bf7c84d8 1313E (v01 HP nc75xx 00010000 MSFT 03000001) [ 0.000000] ACPI: FACS 00000000bf7e7d80 00040 [ 0.000000] ACPI: SLIC 00000000bf7c8250 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: HPET 00000000bf7c83c8 00038 (v01 HP 30C0 00000001 HP 00000001) [ 0.000000] ACPI: APIC 00000000bf7c8400 00068 (v01 HP 30C0 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 00000000bf7c8468 0003C (v01 HP 30C0 00000001 HP 00000001) [ 0.000000] ACPI: TCPA 00000000bf7c84a4 00032 (v02 HP 30C0 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 00000000bf7db616 00059 (v01 HP HPQNLP 00000001 MSFT 03000001) [ 0.000000] ACPI: SSDT 00000000bf7db66f 00328 (v01 HP HPQSAT 00000001 MSFT 03000001) [ 0.000000] ACPI: SSDT 00000000bf7db997 0014E (v01 HP HPQPRN 00000001 MSFT 03000001) [ 0.000000] ACPI: SSDT 00000000bf7dc4ab 0025F (v01 HP Cpu0Tst 00003000 INTL 20060317) [ 0.000000] ACPI: SSDT 00000000bf7dc70a 000A6 (v01 HP Cpu1Tst 00003000 INTL 20060317) [ 0.000000] ACPI: SSDT 00000000bf7dc7b0 004D7 (v01 HP CpuPm 00003000 INTL 20060317) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000140000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff] [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bf7b0 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 1046335 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3914 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 763888 pages, LIFO batch:31 [ 0.000000] Normal zone: 4096 pages used for memmap [ 0.000000] Normal zone: 258048 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bf7b0000 - 00000000bf7c5000 [ 0.000000] PM: Registered nosave memory: 00000000bf7c5000 - 00000000bf7c6000 [ 0.000000] PM: Registered nosave memory: 00000000bf7c6000 - 00000000bf7e7000 [ 0.000000] PM: Registered nosave memory: 00000000bf7e7000 - 00000000bf7e8000 [ 0.000000] PM: Registered nosave memory: 00000000bf7e8000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fed9a000 [ 0.000000] PM: Registered nosave memory: 00000000fed9a000 - 00000000feda0000 [ 0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000fedc0000 [ 0.000000] PM: Registered nosave memory: 00000000fedc0000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000 [ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 00000000ffc00000 [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s83072 r8192 d23424 u1048576 [ 0.000000] pcpu-alloc: s83072 r8192 d23424 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1025850 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-24-generic root=/dev/mapper/sda2_crypt ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 4020828k/5242880k available (6566k kernel code, 1057540k absent, 164512k reserved, 6637k data, 920k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:512 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2493.842 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4987.68 BogoMIPS (lpj=9975368) [ 0.004009] pid_max: default: 32768 minimum: 301 [ 0.004034] Security Framework initialized [ 0.004054] AppArmor: AppArmor initialized [ 0.004056] Yama: becoming mindful. [ 0.004436] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.009981] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.011115] Mount-cache hash table entries: 256 [ 0.011268] Initializing cgroup subsys cpuacct [ 0.011273] Initializing cgroup subsys memory [ 0.011283] Initializing cgroup subsys devices [ 0.011285] Initializing cgroup subsys freezer [ 0.011288] Initializing cgroup subsys blkio [ 0.011294] Initializing cgroup subsys perf_event [ 0.011330] CPU: Physical Processor ID: 0 [ 0.011332] CPU: Processor Core ID: 0 [ 0.011334] mce: CPU supports 6 MCE banks [ 0.011344] CPU0: Thermal monitoring enabled (TM2) [ 0.011348] using mwait in idle threads. [ 0.013866] ACPI: Core revision 20110623 [ 0.020014] ftrace: allocating 27049 entries in 107 pages [ 0.028469] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.070384] CPU0: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz stepping 06 [ 0.072003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.072003] ... version: 2 [ 0.072003] ... bit width: 40 [ 0.072003] ... generic registers: 2 [ 0.072003] ... value mask: 000000ffffffffff [ 0.072003] ... max period: 000000007fffffff [ 0.072003] ... fixed-purpose events: 3 [ 0.072003] ... event mask: 0000000700000003 [ 0.072003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.072003] Booting Node 0, Processors #1 Ok. [ 0.072003] smpboot cpu 1: start_ip = 9a000 [ 0.160040] NMI watchdog enabled, takes one hw-pmu counter. [ 0.160084] Brought up 2 CPUs [ 0.160087] Total of 2 processors activated (9975.12 BogoMIPS). [ 0.163193] devtmpfs: initialized [ 0.164319] EVM: security.selinux [ 0.164320] EVM: security.SMACK64 [ 0.164322] EVM: security.capability [ 0.164332] PM: Registering ACPI NVS region at bf7c5400 (142264 bytes) [ 0.164737] print_constraints: dummy: [ 0.164770] RTC time: 11:07:55, date: 05/09/12 [ 0.164801] NET: Registered protocol family 16 [ 0.164828] Trying to unpack rootfs image as initramfs... [ 0.164934] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.164937] ACPI: bus type pci registered [ 0.164998] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.165001] PCI: not using MMCONFIG [ 0.165002] PCI: Using configuration type 1 for base access [ 0.165953] bio: create slab at 0 [ 0.166028] ACPI: Added _OSI(Module Device) [ 0.166031] ACPI: Added _OSI(Processor Device) [ 0.166032] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.166034] ACPI: Added _OSI(Processor Aggregator Device) [ 0.167530] ACPI: EC: Look up EC in DSDT [ 0.241282] ACPI: SSDT 00000000bf7dbbad 0027F (v01 HP Cpu0Ist 00003000 INTL 20060317) [ 0.241649] ACPI: Dynamic OEM Table Load: [ 0.241652] ACPI: SSDT (null) 0027F (v01 HP Cpu0Ist 00003000 INTL 20060317) [ 0.241743] ACPI: SSDT 00000000bf7dbeb1 005FA (v01 HP Cpu0Cst 00003001 INTL 20060317) [ 0.242086] ACPI: Dynamic OEM Table Load: [ 0.242089] ACPI: SSDT (null) 005FA (v01 HP Cpu0Cst 00003001 INTL 20060317) [ 0.242245] ACPI: SSDT 00000000bf7dbae5 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317) [ 0.242593] ACPI: Dynamic OEM Table Load: [ 0.242596] ACPI: SSDT (null) 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317) [ 0.242656] ACPI: SSDT 00000000bf7dbe2c 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317) [ 0.242999] ACPI: Dynamic OEM Table Load: [ 0.243002] ACPI: SSDT (null) 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317) [ 0.272080] ACPI: Interpreter enabled [ 0.272087] ACPI: (supports S0 S3 S4 S5) [ 0.272105] ACPI: Using IOAPIC for interrupt routing [ 0.272138] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.272583] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.284498] ACPI: Power Resource [C272] (on) [ 0.284842] ACPI: Power Resource [C27F] (on) [ 0.285408] ACPI: Power Resource [C29B] (on) [ 0.287845] ACPI: Power Resource [C1C5] (off) [ 0.289426] ACPI: Power Resource [C3BC] (off) [ 0.289476] ACPI: Power Resource [C3BD] (off) [ 0.289526] ACPI: Power Resource [C3BE] (off) [ 0.289577] ACPI: Power Resource [C3BF] (off) [ 0.289626] ACPI: Power Resource [C3C0] (off) [ 0.290206] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.290623] ACPI: No dock devices found. [ 0.290623] HEST: Table not found. [ 0.290623] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.292746] ACPI: PCI Root Bridge [C003] (domain 0000 [bus 00-ff]) [ 0.296797] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.296800] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.296802] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.296804] pci_root PNP0A08:00: host bridge window [mem 0xbf800000-0xfedfffff] [ 0.296807] pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff] [ 0.296809] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.296823] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600 [ 0.296870] pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300 [ 0.296882] pci 0000:00:02.0: reg 10: [mem 0xe4600000-0xe46fffff 64bit] [ 0.296890] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.296896] pci 0000:00:02.0: reg 20: [io 0x4000-0x4007] [ 0.296932] pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380 [ 0.296943] pci 0000:00:02.1: reg 10: [mem 0xe4700000-0xe47fffff 64bit] [ 0.297035] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03 [ 0.297090] pci 0000:00:1a.0: reg 20: [io 0x4020-0x403f] [ 0.297132] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03 [ 0.297189] pci 0000:00:1a.1: reg 20: [io 0x4040-0x405f] [ 0.297246] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03 [ 0.297269] pci 0000:00:1a.7: reg 10: [mem 0xe4800000-0xe48003ff] [ 0.297376] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.297382] pci 0000:00:1a.7: PME# disabled [ 0.297412] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403 [ 0.297434] pci 0000:00:1b.0: reg 10: [mem 0xe4804000-0xe4807fff 64bit] [ 0.297539] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.297544] pci 0000:00:1b.0: PME# disabled [ 0.297573] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604 [ 0.297681] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.297686] pci 0000:00:1c.0: PME# disabled [ 0.297718] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604 [ 0.297828] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.297833] pci 0000:00:1c.1: PME# disabled [ 0.297865] pci 0000:00:1c.2: [8086:2843] type 1 class 0x000604 [ 0.297974] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.297979] pci 0000:00:1c.2: PME# disabled [ 0.298012] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604 [ 0.298119] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.298125] pci 0000:00:1c.4: PME# disabled [ 0.298159] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03 [ 0.298215] pci 0000:00:1d.0: reg 20: [io 0x4060-0x407f] [ 0.298258] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03 [ 0.298315] pci 0000:00:1d.1: reg 20: [io 0x4080-0x409f] [ 0.298357] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03 [ 0.298412] pci 0000:00:1d.2: reg 20: [io 0x40a0-0x40bf] [ 0.298469] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03 [ 0.298493] pci 0000:00:1d.7: reg 10: [mem 0xe4808000-0xe48083ff] [ 0.298600] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.298605] pci 0000:00:1d.7: PME# disabled [ 0.298629] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.298727] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601 [ 0.298840] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.298847] pci 0000:00:1f.0: quirk: [io 0x1100-0x113f] claimed by ICH6 GPIO [ 0.298851] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f) [ 0.298859] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007) [ 0.298915] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101 [ 0.298933] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.298945] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.298957] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 0.298969] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 0.298981] pci 0000:00:1f.1: reg 20: [io 0x40c0-0x40cf] [ 0.299034] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106 [ 0.299060] pci 0000:00:1f.2: reg 10: [io 0x13f0-0x13f7] [ 0.299072] pci 0000:00:1f.2: reg 14: [io 0x15f4-0x15f7] [ 0.299085] pci 0000:00:1f.2: reg 18: [io 0x1370-0x1377] [ 0.299097] pci 0000:00:1f.2: reg 1c: [io 0x1574-0x1577] [ 0.299109] pci 0000:00:1f.2: reg 20: [io 0x4100-0x411f] [ 0.299121] pci 0000:00:1f.2: reg 24: [mem 0xe4809000-0xe48097ff] [ 0.299186] pci 0000:00:1f.2: PME# supported from D3hot [ 0.299190] pci 0000:00:1f.2: PME# disabled [ 0.299271] pci 0000:00:1c.0: PCI bridge to [bus 08-08] [ 0.299449] pci 0000:10:00.0: [8086:4222] type 0 class 0x000280 [ 0.299505] pci 0000:10:00.0: reg 10: [mem 0xe4100000-0xe4100fff] [ 0.299925] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold [ 0.299938] pci 0000:10:00.0: PME# disabled [ 0.308098] pci 0000:00:1c.1: PCI bridge to [bus 10-10] [ 0.308106] pci 0000:00:1c.1: bridge window [mem 0xe4100000-0xe41fffff] [ 0.308247] pci 0000:18:00.0: [14e4:1693] type 0 class 0x000200 [ 0.308278] pci 0000:18:00.0: reg 10: [mem 0xe4000000-0xe400ffff 64bit] [ 0.308465] pci 0000:18:00.0: PME# supported from D3hot D3cold [ 0.308471] pci 0000:18:00.0: PME# disabled [ 0.316076] pci 0000:00:1c.2: PCI bridge to [bus 18-18] [ 0.316084] pci 0000:00:1c.2: bridge window [mem 0xe4000000-0xe40fffff] [ 0.316152] pci 0000:00:1c.4: PCI bridge to [bus 28-28] [ 0.316156] pci 0000:00:1c.4: bridge window [io 0x2000-0x3fff] [ 0.316161] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xe3ffffff] [ 0.316223] pci 0000:02:04.0: [1180:0476] type 2 class 0x000607 [ 0.316251] pci 0000:02:04.0: reg 10: [mem 0xe4200000-0xe4200fff] [ 0.316296] pci 0000:02:04.0: supports D1 D2 [ 0.316297] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.316303] pci 0000:02:04.0: PME# disabled [ 0.316330] pci 0000:02:04.1: [1180:0832] type 0 class 0x000c00 [ 0.316357] pci 0000:02:04.1: reg 10: [mem 0xe4201000-0xe42017ff] [ 0.316478] pci 0000:02:04.1: supports D1 D2 [ 0.316480] pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.316486] pci 0000:02:04.1: PME# disabled [ 0.316562] pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode) [ 0.316570] pci 0000:00:1e.0: bridge window [mem 0xe4200000-0xe45fffff] [ 0.316578] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.316580] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.316582] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.316585] pci 0000:00:1e.0: bridge window [mem 0xbf800000-0xfedfffff] (subtractive decode) [ 0.316587] pci 0000:00:1e.0: bridge window [mem 0xfee01000-0xffffffff] (subtractive decode) [ 0.316590] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.316644] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03] [ 0.316686] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT] [ 0.316836] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B0._PRT] [ 0.316904] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11D._PRT] [ 0.316935] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C131._PRT] [ 0.316970] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C132._PRT] [ 0.317004] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C134._PRT] [ 0.317068] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.317071] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.317073] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.329418] ACPI: PCI Interrupt Link [C12D] (IRQs 10 11) *5 [ 0.329487] ACPI: PCI Interrupt Link [C12E] (IRQs *10 11) [ 0.329551] ACPI: PCI Interrupt Link [C12F] (IRQs 10 *11) [ 0.329614] ACPI: PCI Interrupt Link [C130] (IRQs 10 11) *0, disabled. [ 0.329679] ACPI: PCI Interrupt Link [C140] (IRQs *10 11) [ 0.329742] ACPI: PCI Interrupt Link [C141] (IRQs *10 11) [ 0.329802] ACPI: PCI Interrupt Link [C142] (IRQs 10 11) *0, disabled. [ 0.329836] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20110623/pci_link-184) [ 0.329964] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.329975] vgaarb: loaded [ 0.329976] vgaarb: bridge control possible 0000:00:02.0 [ 0.330086] i2c-core: driver [aat2870] using legacy suspend method [ 0.330087] i2c-core: driver [aat2870] using legacy resume method [ 0.330159] SCSI subsystem initialized [ 0.330232] libata version 3.00 loaded. [ 0.330290] usbcore: registered new interface driver usbfs [ 0.330300] usbcore: registered new interface driver hub [ 0.330327] usbcore: registered new device driver usb [ 0.330414] PCI: Using ACPI for IRQ routing [ 0.332864] PCI: pci_cache_line_size set to 64 bytes [ 0.333133] Expanded resource reserved due to conflict with PCI Bus 0000:00 [ 0.333137] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.333139] reserve RAM buffer: 00000000bf7b0000 - 00000000bfffffff [ 0.333246] NetLabel: Initializing [ 0.333248] NetLabel: domain hash size = 128 [ 0.333249] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.333261] NetLabel: unlabeled traffic allowed by default [ 0.333304] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.333309] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.333313] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.340058] Switching to clocksource hpet [ 0.347750] AppArmor: AppArmor Filesystem Enabled [ 0.347798] pnp: PnP ACPI init [ 0.347817] ACPI: bus type pnp registered [ 0.347920] pnp 00:00: [mem 0x00000000-0x0009ffff] [ 0.347922] pnp 00:00: [mem 0x000e0000-0x000fffff] [ 0.347924] pnp 00:00: [mem 0x00100000-0xbf7fffff] [ 0.348028] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.348031] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.348034] system 00:00: [mem 0x00100000-0xbf7fffff] could not be reserved [ 0.348038] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.350098] pnp 00:01: [bus 00-ff] [ 0.350101] pnp 00:01: [io 0x0cf8-0x0cff] [ 0.350103] pnp 00:01: [io 0x0000-0x0cf7 window] [ 0.350105] pnp 00:01: [io 0x0d00-0xffff window] [ 0.350107] pnp 00:01: [mem 0x000a0000-0x000bffff window] [ 0.350109] pnp 00:01: [mem 0xbf800000-0xfedfffff window] [ 0.350111] pnp 00:01: [mem 0xfee01000-0xffffffff window] [ 0.350113] pnp 00:01: [mem 0x000d0000-0x000dffff window] [ 0.350198] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.350565] pnp 00:02: [io 0x03f8-0x03ff] [ 0.350579] pnp 00:02: [irq 4] [ 0.350631] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) [ 0.350961] pnp 00:03: [io 0x0378-0x037f] [ 0.350964] pnp 00:03: [io 0x0778-0x077a] [ 0.350970] pnp 00:03: [irq 7] [ 0.350971] pnp 00:03: [dma 1] [ 0.351055] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.351115] pnp 00:04: [io 0x0560-0x056f] [ 0.351120] pnp 00:04: [io 0x0570-0x057f] [ 0.351122] pnp 00:04: [mem 0xfed40000-0xfed44fff] [ 0.351147] pnp 00:04: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.351156] pnp 00:05: [io 0x00f0-0x00ff] [ 0.351162] pnp 00:05: [irq 13] [ 0.351188] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.351198] pnp 00:06: [io 0x0000-0x000f] [ 0.351200] pnp 00:06: [io 0x0080-0x008f] [ 0.351201] pnp 00:06: [io 0x00c0-0x00df] [ 0.351203] pnp 00:06: [dma 4] [ 0.351233] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.351241] pnp 00:07: [io 0x0061] [ 0.351266] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.351274] pnp 00:08: [io 0x0070-0x0071] [ 0.351276] pnp 00:08: [io 0x0072-0x0073] [ 0.351281] pnp 00:08: [irq 8] [ 0.351308] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.351361] pnp 00:09: [mem 0xfed00000-0xfed003ff] [ 0.351390] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.351398] pnp 00:0a: [io 0x0060] [ 0.351400] pnp 00:0a: [io 0x0064] [ 0.351405] pnp 00:0a: [irq 1] [ 0.351433] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.351444] pnp 00:0b: [irq 12] [ 0.351474] pnp 00:0b: Plug and Play ACPI device, IDs SYN0134 SYN0100 SYN0002 PNP0f13 (active) [ 0.351568] pnp 00:0c: [io 0x0010-0x001f] [ 0.351570] pnp 00:0c: [io 0x0024-0x003f] [ 0.351572] pnp 00:0c: [io 0x004e-0x004f] [ 0.351573] pnp 00:0c: [io 0x0050-0x0053] [ 0.351575] pnp 00:0c: [io 0x0063] [ 0.351576] pnp 00:0c: [io 0x0065] [ 0.351578] pnp 00:0c: [io 0x0067] [ 0.351580] pnp 00:0c: [io 0x0074-0x0077] [ 0.351581] pnp 00:0c: [io 0x0090-0x009f] [ 0.351583] pnp 00:0c: [io 0x00a4-0x00bd] [ 0.351585] pnp 00:0c: [io 0x0500-0x055f] [ 0.351586] pnp 00:0c: [io 0x0800-0x080f] [ 0.351588] pnp 00:0c: [mem 0xffb00000-0xffbfffff] [ 0.351590] pnp 00:0c: [mem 0xfff00000-0xffffffff] [ 0.351645] system 00:0c: [io 0x0500-0x055f] has been reserved [ 0.351647] system 00:0c: [io 0x0800-0x080f] has been reserved [ 0.351650] system 00:0c: [mem 0xffb00000-0xffbfffff] has been reserved [ 0.351653] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved [ 0.351656] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.352135] pnp 00:0d: [irq 23] [ 0.352181] pnp 00:0d: Plug and Play ACPI device, IDs HPQ0004 (active) [ 0.352198] pnp 00:0e: [io 0x04d0-0x04d1] [ 0.352200] pnp 00:0e: [io 0x1000-0x107f] [ 0.352202] pnp 00:0e: [io 0x1100-0x113f] [ 0.352204] pnp 00:0e: [io 0x1200-0x121f] [ 0.352206] pnp 00:0e: [mem 0xf8000000-0xfbffffff] [ 0.352208] pnp 00:0e: [mem 0xfec00000-0xfec000ff] [ 0.352210] pnp 00:0e: [mem 0xfed20000-0xfed3ffff] [ 0.352211] pnp 00:0e: [mem 0xfed45000-0xfed8ffff] [ 0.352213] pnp 00:0e: [mem 0xfed90000-0xfed99fff] [ 0.352273] system 00:0e: [io 0x04d0-0x04d1] has been reserved [ 0.352276] system 00:0e: [io 0x1000-0x107f] has been reserved [ 0.352278] system 00:0e: [io 0x1100-0x113f] has been reserved [ 0.352280] system 00:0e: [io 0x1200-0x121f] has been reserved [ 0.352283] system 00:0e: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.352285] system 00:0e: [mem 0xfec00000-0xfec000ff] could not be reserved [ 0.352288] system 00:0e: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.352291] system 00:0e: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.352293] system 00:0e: [mem 0xfed90000-0xfed99fff] has been reserved [ 0.352296] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.352864] pnp 00:0f: [mem 0x000cee00-0x000cffff] [ 0.352867] pnp 00:0f: [mem 0xfeda0000-0xfedbffff] [ 0.352869] pnp 00:0f: [mem 0xfee00000-0xfee00fff] [ 0.352933] system 00:0f: [mem 0x000cee00-0x000cffff] has been reserved [ 0.352936] system 00:0f: [mem 0xfeda0000-0xfedbffff] has been reserved [ 0.352939] system 00:0f: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.352942] system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.352954] pnp: PnP ACPI: found 16 devices [ 0.352955] ACPI: ACPI bus type pnp unregistered [ 0.359257] PCI: max bus depth: 2 pci_try_num: 3 [ 0.359322] pci 0000:00:1e.0: BAR 15: assigned [mem 0xc0000000-0xc3ffffff pref] [ 0.359325] pci 0000:00:1e.0: BAR 13: assigned [io 0x5000-0x5fff] [ 0.359329] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc4000000-0xc41fffff 64bit pref] [ 0.359332] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc4200000-0xc43fffff 64bit pref] [ 0.359335] pci 0000:00:1c.2: BAR 13: assigned [io 0x6000-0x6fff] [ 0.359338] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc4400000-0xc45fffff 64bit pref] [ 0.359341] pci 0000:00:1c.1: BAR 13: assigned [io 0x7000-0x7fff] [ 0.359344] pci 0000:00:1c.0: PCI bridge to [bus 08-08] [ 0.359359] pci 0000:00:1c.1: PCI bridge to [bus 10-10] [ 0.359362] pci 0000:00:1c.1: bridge window [io 0x7000-0x7fff] [ 0.359369] pci 0000:00:1c.1: bridge window [mem 0xe4100000-0xe41fffff] [ 0.359374] pci 0000:00:1c.1: bridge window [mem 0xc4400000-0xc45fffff 64bit pref] [ 0.359381] pci 0000:00:1c.2: PCI bridge to [bus 18-18] [ 0.359384] pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff] [ 0.359391] pci 0000:00:1c.2: bridge window [mem 0xe4000000-0xe40fffff] [ 0.359395] pci 0000:00:1c.2: bridge window [mem 0xc4200000-0xc43fffff 64bit pref] [ 0.359403] pci 0000:00:1c.4: PCI bridge to [bus 28-28] [ 0.359406] pci 0000:00:1c.4: bridge window [io 0x2000-0x3fff] [ 0.359412] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xe3ffffff] [ 0.359417] pci 0000:00:1c.4: bridge window [mem 0xc4000000-0xc41fffff 64bit pref] [ 0.359427] pci 0000:02:04.0: BAR 16: assigned [mem 0xc8000000-0xcbffffff] [ 0.359429] pci 0000:02:04.0: BAR 15: assigned [mem 0xc0000000-0xc3ffffff pref] [ 0.359431] pci 0000:02:04.0: BAR 14: assigned [io 0x5000-0x50ff] [ 0.359434] pci 0000:02:04.0: BAR 13: assigned [io 0x5400-0x54ff] [ 0.359436] pci 0000:02:04.0: CardBus bridge to [bus 03-06] [ 0.359438] pci 0000:02:04.0: bridge window [io 0x5400-0x54ff] [ 0.359444] pci 0000:02:04.0: bridge window [io 0x5000-0x50ff] [ 0.359449] pci 0000:02:04.0: bridge window [mem 0xc0000000-0xc3ffffff pref] [ 0.359455] pci 0000:02:04.0: bridge window [mem 0xc8000000-0xcbffffff] [ 0.359460] pci 0000:00:1e.0: PCI bridge to [bus 02-03] [ 0.359464] pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff] [ 0.359470] pci 0000:00:1e.0: bridge window [mem 0xe4200000-0xe45fffff] [ 0.359475] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc3ffffff pref] [ 0.359496] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.359502] pci 0000:00:1c.0: setting latency timer to 64 [ 0.359513] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.359518] pci 0000:00:1c.1: setting latency timer to 64 [ 0.359528] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.359533] pci 0000:00:1c.2: setting latency timer to 64 [ 0.359540] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.359545] pci 0000:00:1c.4: setting latency timer to 64 [ 0.359553] pci 0000:00:1e.0: setting latency timer to 64 [ 0.359563] pci 0000:02:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.359570] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.359572] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.359574] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.359576] pci_bus 0000:00: resource 7 [mem 0xbf800000-0xfedfffff] [ 0.359578] pci_bus 0000:00: resource 8 [mem 0xfee01000-0xffffffff] [ 0.359580] pci_bus 0000:00: resource 9 [mem 0x000d0000-0x000dffff] [ 0.359583] pci_bus 0000:10: resource 0 [io 0x7000-0x7fff] [ 0.359585] pci_bus 0000:10: resource 1 [mem 0xe4100000-0xe41fffff] [ 0.359588] pci_bus 0000:10: resource 2 [mem 0xc4400000-0xc45fffff 64bit pref] [ 0.359591] pci_bus 0000:18: resource 0 [io 0x6000-0x6fff] [ 0.359594] pci_bus 0000:18: resource 1 [mem 0xe4000000-0xe40fffff] [ 0.359597] pci_bus 0000:18: resource 2 [mem 0xc4200000-0xc43fffff 64bit pref] [ 0.359600] pci_bus 0000:28: resource 0 [io 0x2000-0x3fff] [ 0.359603] pci_bus 0000:28: resource 1 [mem 0xe0000000-0xe3ffffff] [ 0.359606] pci_bus 0000:28: resource 2 [mem 0xc4000000-0xc41fffff 64bit pref] [ 0.359609] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff] [ 0.359612] pci_bus 0000:02: resource 1 [mem 0xe4200000-0xe45fffff] [ 0.359614] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc3ffffff pref] [ 0.359617] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] [ 0.359620] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] [ 0.359623] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] [ 0.359625] pci_bus 0000:02: resource 7 [mem 0xbf800000-0xfedfffff] [ 0.359628] pci_bus 0000:02: resource 8 [mem 0xfee01000-0xffffffff] [ 0.359631] pci_bus 0000:02: resource 9 [mem 0x000d0000-0x000dffff] [ 0.359634] pci_bus 0000:03: resource 0 [io 0x5400-0x54ff] [ 0.359636] pci_bus 0000:03: resource 1 [io 0x5000-0x50ff] [ 0.359638] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xc3ffffff pref] [ 0.359640] pci_bus 0000:03: resource 3 [mem 0xc8000000-0xcbffffff] [ 0.359682] NET: Registered protocol family 2 [ 0.359828] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.361099] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.365735] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.366351] TCP: Hash tables configured (established 524288 bind 65536) [ 0.366354] TCP reno registered [ 0.366364] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.366407] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.366569] NET: Registered protocol family 1 [ 0.366590] pci 0000:00:02.0: Boot video device [ 0.366612] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.366636] pci 0000:00:1a.0: PCI INT A disabled [ 0.366644] pci 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.366662] pci 0000:00:1a.1: PCI INT B disabled [ 0.366673] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.366709] pci 0000:00:1a.7: PCI INT C disabled [ 0.366742] pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.366761] pci 0000:00:1d.0: PCI INT A disabled [ 0.366774] pci 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.366794] pci 0000:00:1d.1: PCI INT B disabled [ 0.366803] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.366821] pci 0000:00:1d.2: PCI INT C disabled [ 0.366831] pci 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.366856] pci 0000:00:1d.7: PCI INT A disabled [ 0.366967] PCI: CLS 64 bytes, default 64 [ 0.366970] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.366973] Placing 64MB software IO TLB between ffff8800bb7aa000 - ffff8800bf7aa000 [ 0.366975] software IO TLB at phys 0xbb7aa000 - 0xbf7aa000 [ 0.367360] audit: initializing netlink socket (disabled) [ 0.367371] type=2000 audit(1336561675.360:1): initialized [ 0.402898] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.433546] VFS: Disk quotas dquot_6.5.2 [ 0.433605] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.434083] fuse init (API version 7.17) [ 0.434170] msgmni has been set to 7853 [ 0.434461] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.434486] io scheduler noop registered [ 0.434488] io scheduler deadline registered [ 0.434519] io scheduler cfq registered (default) [ 0.434634] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.434694] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.434775] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.434829] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.434907] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.434960] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X [ 0.435037] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.435090] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X [ 0.435188] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.435210] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.435263] intel_idle: MWAIT substates: 0x3122220 [ 0.435265] intel_idle: does not run on family 6 model 23 [ 0.438719] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.438807] ACPI: AC Adapter [C239] (on-line) [ 0.438884] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 0.438889] ACPI: Sleep Button [C2BF] [ 0.438933] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 0.438962] ACPI: Lid Switch [C153] [ 0.439005] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.439008] ACPI: Power Button [PWRF] [ 0.439088] ACPI: Fan [C3C1] (off) [ 0.439136] ACPI: Fan [C3C2] (off) [ 0.439183] ACPI: Fan [C3C3] (off) [ 0.439228] ACPI: Fan [C3C4] (off) [ 0.439271] ACPI: Fan [C3C5] (off) [ 0.448113] Monitor-Mwait will be used to enter C-1 state [ 0.448145] Monitor-Mwait will be used to enter C-2 state [ 0.448153] Marking TSC unstable due to TSC halts in idle [ 0.448160] ACPI: acpi_idle registered with cpuidle [ 0.452732] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.452735] ACPI: Thermal Zone [TZ3] (39 C) [ 0.460964] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.460966] ACPI: Thermal Zone [TZ4] (25 C) [ 0.464722] thermal LNXTHERM:02: registered as thermal_zone2 [ 0.464725] ACPI: Thermal Zone [TZ5] (50 C) [ 0.478583] Freeing initrd memory: 16864k freed [ 0.481891] thermal LNXTHERM:03: registered as thermal_zone3 [ 0.481897] ACPI: Thermal Zone [TZ1] (52 C) [ 0.482043] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.482071] ACPI: Battery Slot [C23B] (battery present) [ 0.482186] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.482194] ACPI: Battery Slot [C23A] (battery absent) [ 0.482256] ERST: Table is not found! [ 0.482258] GHES: HEST is not enabled! [ 0.482502] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.503267] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.503313] ACPI: Battery Slot [C23A] (battery absent) [ 0.538172] ACPI: Battery Slot [C23B] (battery present) [ 0.616650] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.628355] Linux agpgart interface v0.103 [ 0.628429] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 0.628533] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 0.630556] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 0.630699] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.632191] brd: module loaded [ 0.632969] loop: module loaded [ 0.633103] ahci 0000:00:1f.2: version 3.0 [ 0.633117] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.633169] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X [ 0.633200] ahci: SSS flag set, parallel bus scan disabled [ 0.633223] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode [ 0.633226] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc [ 0.633232] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.633576] scsi0 : ahci [ 0.633667] scsi1 : ahci [ 0.633748] scsi2 : ahci [ 0.633821] ata1: SATA max UDMA/133 abar m2048@0xe4809000 port 0xe4809100 irq 44 [ 0.633823] ata2: DUMMY [ 0.633825] ata3: DUMMY [ 0.633878] ata_piix 0000:00:1f.1: version 2.13 [ 0.633886] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.633916] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.634221] scsi3 : ata_piix [ 0.634296] scsi4 : ata_piix [ 0.634547] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40c0 irq 14 [ 0.634550] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40c8 irq 15 [ 0.634623] ata5: port disabled--ignoring [ 0.634872] Fixed MDIO Bus: probed [ 0.634889] tun: Universal TUN/TAP device driver, 1.6 [ 0.634891] tun: (C) 1999-2004 Max Krasnyansky [ 0.635039] PPP generic driver version 2.4.2 [ 0.635144] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.635159] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.635173] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.635177] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.635221] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.635249] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.639140] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 0.639153] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe4800000 [ 0.652019] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.652140] hub 1-0:1.0: USB hub found [ 0.652144] hub 1-0:1.0: 4 ports detected [ 0.652211] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.652223] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.652226] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.652276] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.652306] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.656203] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 0.656217] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe4808000 [ 0.672018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.672142] hub 2-0:1.0: USB hub found [ 0.672145] hub 2-0:1.0: 6 ports detected [ 0.672215] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.672226] uhci_hcd: USB Universal Host Controller Interface driver [ 0.672240] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.672248] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.672251] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.672299] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.672334] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00004020 [ 0.672452] hub 3-0:1.0: USB hub found [ 0.672457] hub 3-0:1.0: 2 ports detected [ 0.672524] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.672531] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.672534] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.672577] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.672611] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00004040 [ 0.672726] hub 4-0:1.0: USB hub found [ 0.672729] hub 4-0:1.0: 2 ports detected [ 0.672791] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.672799] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.672802] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.672847] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 0.672873] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004060 [ 0.672988] hub 5-0:1.0: USB hub found [ 0.672992] hub 5-0:1.0: 2 ports detected [ 0.673054] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.673061] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.673065] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.673110] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 0.673146] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00004080 [ 0.673259] hub 6-0:1.0: USB hub found [ 0.673262] hub 6-0:1.0: 2 ports detected [ 0.673323] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.673331] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.673334] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.673377] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 0.673403] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000040a0 [ 0.673520] hub 7-0:1.0: USB hub found [ 0.673523] hub 7-0:1.0: 2 ports detected [ 0.673627] usbcore: registered new interface driver libusual [ 0.673667] i8042: PNP: PS/2 Controller [PNP0303:C298,PNP0f13:C299] at 0x60,0x64 irq 1,12 [ 0.675270] i8042: Detected active multiplexing controller, rev 1.1 [ 0.675972] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.675979] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.676021] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.676045] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.676067] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.676186] mousedev: PS/2 mouse device common for all mice [ 0.676381] rtc_cmos 00:08: RTC can wake from S4 [ 0.676500] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 0.676530] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.676599] device-mapper: uevent: version 1.0.3 [ 0.676674] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.676720] cpuidle: using governor ladder [ 0.676780] cpuidle: using governor menu [ 0.676782] EFI Variables Facility v0.08 2004-May-17 [ 0.676990] TCP cubic registered [ 0.677090] NET: Registered protocol family 10 [ 0.677499] NET: Registered protocol family 17 [ 0.677513] Registering the dns_resolver key type [ 0.677697] PM: Hibernation image not present or could not be loaded. [ 0.677707] registered taskstats version 1 [ 0.697148] Magic number: 12:897:124 [ 0.697287] rtc_cmos 00:08: setting system clock to 2012-05-09 11:07:56 UTC (1336561676) [ 0.702905] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.702907] EDD information not available. [ 0.708523] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.796454] ata4.00: ATAPI: Optiarc DVD RW AD-7593A, 1.05, max UDMA/33 [ 0.812332] ata4.00: configured for UDMA/33 [ 0.952084] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.953513] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 0.953517] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 0.953637] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 0.953642] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 0.954149] ata1.00: ATA-8: FUJITSU MHZ2250BH G2, 8909, max UDMA/100 [ 0.954152] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.955676] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 0.955680] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 0.955816] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 0.955820] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 0.956316] ata1.00: configured for UDMA/100 [ 0.956486] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHZ2250B 8909 PQ: 0 ANSI: 5 [ 0.956630] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 0.956638] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.956689] sd 0:0:0:0: [sda] Write Protect is off [ 0.956696] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.956723] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.958381] scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7593A 1.05 PQ: 0 ANSI: 5 [ 0.961839] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.961843] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.961984] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 0.962123] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 0.964072] usb 1-4: new high-speed USB device number 2 using ehci_hcd [ 0.995931] sda: sda1 sda2 sda3 sda4 [ 0.996591] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.998405] Freeing unused kernel memory: 920k freed [ 0.998670] Write protecting the kernel read-only data: 12288k [ 1.004941] Freeing unused kernel memory: 1608k freed [ 1.009980] Freeing unused kernel memory: 1196k freed [ 1.029012] udevd[101]: starting version 175 [ 1.087734] [drm] Initialized drm 1.1.0 20060810 [ 1.096628] hub 1-4:1.0: USB hub found [ 1.096709] hub 1-4:1.0: 4 ports detected [ 1.097488] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.097495] i915 0000:00:02.0: setting latency timer to 64 [ 1.102255] tg3.c:v3.121 (November 2, 2011) [ 1.102309] tg3 0000:18:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.102319] tg3 0000:18:00.0: setting latency timer to 64 [ 1.147127] firewire_ohci 0000:02:04.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.153551] wmi: Mapper loaded [ 1.175784] i915 0000:00:02.0: irq 45 for MSI/MSI-X [ 1.175790] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 1.175792] [drm] Driver supports precise vblank timestamp query. [ 1.175835] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.208099] firewire_ohci: Added fw-ohci device 0000:02:04.1, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11 [ 1.232018] tg3 0000:18:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. [ 1.292015] tg3 0000:18:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. [ 1.352012] tg3 0000:18:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. [ 1.353123] tg3 0000:18:00.0: eth0: Tigon3 [partno(none) rev b002] (PCI Express) MAC address 00:1f:29:92:1c:78 [ 1.353127] tg3 0000:18:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 1.353131] tg3 0000:18:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.353134] tg3 0000:18:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 1.368237] usb 1-4.1: new low-speed USB device number 3 using ehci_hcd [ 1.472709] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.1/1-4.1:1.0/input/input4 [ 1.472875] generic-usb 0003:413C:3012.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1a.7-4.1/input0 [ 1.472891] usbcore: registered new interface driver usbhid [ 1.472893] usbhid: USB HID core driver [ 1.492214] [drm] initialized overlay support [ 1.540112] usb 1-4.2: new full-speed USB device number 4 using ehci_hcd [ 1.642912] input: Dell Dell Smart Card Reader Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.2/1-4.2:1.0/input/input5 [ 1.643038] generic-usb 0003:413C:2101.0002: input,hidraw1: USB HID v1.11 Keyboard [Dell Dell Smart Card Reader Keyboard] on usb-0000:00:1a.7-4.2/input0 [ 1.695473] fbcon: inteldrmfb (fb0) is primary device [ 1.724176] firewire_core: created device fw0: GUID 00023f99290d2b10, S400 [ 1.884061] usb 5-2: new full-speed USB device number 2 using uhci_hcd [ 1.900032] Console: switching to colour frame buffer device 210x65 [ 1.903947] fb0: inteldrmfb frame buffer device [ 1.903948] drm: registered panic notifier [ 1.904887] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000004) is beyond end of object (20110623/exoparg2-418) [ 1.904897] ACPI Error: Method parse/execution failed [\_SB_.C003.C098._DOD] (Node ffff880138a38938), AE_AML_PACKAGE_LIMIT (20110623/psparse-536) [ 1.904906] ACPI Exception: AE_AML_PACKAGE_LIMIT, Evaluating _DOD (20110623/video-1155) [ 1.905377] acpi device:01: registered as cooling_device7 [ 1.905698] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 1.905740] ACPI: Video Device [C098] (multi-head: yes rom: no post: no) [ 1.905790] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 34.027164] EXT4-fs (dm-0): INFO: recovery required on readonly filesystem [ 34.027167] EXT4-fs (dm-0): write access will be enabled during recovery [ 39.473988] EXT4-fs (dm-0): recovery complete [ 39.475033] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 56.704898] init: Failed to spawn console-setup main process: unable to execute: No such file or directory [ 56.707115] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 56.738762] udevd[479]: starting version 175 [ 56.950479] lp: driver loaded but no devices found [ 57.008679] WARNING! power/level is deprecated; use power/control instead [ 57.037480] tpm_tis 00:04: 1.2 TPM (device-id 0xB, rev-id 16) [ 57.316301] yenta_cardbus 0000:02:04.0: CardBus bridge found [103c:30c0] [ 57.329233] hp_accel: hardware type NC6710x found [ 57.329871] lis3lv02d: 12 bits sensor found [ 57.382066] cfg80211: Calling CRDA to update world regulatory domain [ 57.443360] cfg80211: World regulatory domain updated: [ 57.443364] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 57.443366] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 57.443369] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 57.443371] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 57.443374] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 57.443376] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 57.449676] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0cb8, PCI irq 16 [ 57.449680] yenta_cardbus 0000:02:04.0: Socket status: 30000006 [ 57.449684] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06 [ 57.449694] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [io 0x5000-0x5fff] [ 57.449697] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0xe4200000-0xe45fffff] [ 57.449699] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4200000-0xe45fffff: excluding 0xe4200000-0xe423ffff [ 57.449711] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0xc0000000-0xc3ffffff pref] [ 57.449713] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0000000-0xc3ffffff: excluding 0xc0000000-0xc3ffffff [ 57.449742] ppdev: user-space parallel port driver [ 57.468076] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7 [ 57.468723] Registered led device: hp::hddprotect [ 57.468743] hp_accel: driver loaded [ 57.547688] type=1400 audit(1336554533.346:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=890 comm="apparmor_parser" [ 57.547754] type=1400 audit(1336554533.346:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=890 comm="apparmor_parser" [ 57.547813] type=1400 audit(1336554533.346:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=890 comm="apparmor_parser" [ 57.564426] input: HP WMI hotkeys as /devices/virtual/input/input8 [ 57.700113] tpm_tis 00:04: Adjusting TPM timeout parameters. [ 57.710461] type=1400 audit(1336554533.510:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1035 comm="apparmor_parser" [ 57.710524] type=1400 audit(1336554533.510:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1035 comm="apparmor_parser" [ 57.710579] type=1400 audit(1336554533.510:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1035 comm="apparmor_parser" [ 57.731127] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff [ 57.731155] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff [ 57.731177] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff [ 57.962124] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0 [ 57.962130] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0 [ 58.002818] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9 [ 58.015134] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s [ 58.015136] iwl3945: Copyright(c) 2003-2011 Intel Corporation [ 58.015252] iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 58.015266] iwl3945 0000:10:00.0: setting latency timer to 64 [ 58.070439] iwl3945 0000:10:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels [ 58.070442] iwl3945 0000:10:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 58.070590] iwl3945 0000:10:00.0: irq 46 for MSI/MSI-X [ 58.070777] Registered led device: phy0-led [ 58.070825] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 58.193436] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs' [ 58.223283] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 58.364589] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0 [ 58.364597] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0 [ 58.364607] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 58.364669] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 58.364712] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 58.420145] parport_pc 00:03: reported by Plug and Play ACPI [ 58.420224] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 58.508230] lp0: using parport0 (interrupt-driven). [ 63.904556] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 65.359866] init: failsafe main process (1542) killed by TERM signal [ 65.726340] Bluetooth: Core ver 2.16 [ 65.726362] NET: Registered protocol family 31 [ 65.726364] Bluetooth: HCI device and connection manager initialized [ 65.726367] Bluetooth: HCI socket layer initialized [ 65.726368] Bluetooth: L2CAP socket layer initialized [ 65.726374] Bluetooth: SCO socket layer initialized [ 65.740497] Bluetooth: RFCOMM TTY layer initialized [ 65.740502] Bluetooth: RFCOMM socket layer initialized [ 65.740504] Bluetooth: RFCOMM ver 1.11 [ 65.759735] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 65.759738] Bluetooth: BNEP filters: protocol multicast [ 66.090379] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 66.092934] tg3 0000:18:00.0: irq 48 for MSI/MSI-X [ 66.123565] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 66.124341] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 66.228083] type=1400 audit(1336554542.030:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1700 comm="apparmor_parser" [ 66.385862] Adding 4452348k swap on /dev/mapper/sda4_crypt. Priority:-1 extents:1 across:4452348k [ 66.390835] type=1400 audit(1336554542.190:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1691 comm="apparmor_parser" [ 66.391078] type=1400 audit(1336554542.190:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1691 comm="apparmor_parser" [ 66.484632] type=1400 audit(1336554542.286:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1701 comm="apparmor_parser" [ 66.484748] type=1400 audit(1336554542.286:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1701 comm="apparmor_parser" [ 66.484826] type=1400 audit(1336554542.286:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1701 comm="apparmor_parser" [ 67.211400] type=1400 audit(1336554543.010:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1752 comm="apparmor_parser" [ 67.211773] type=1400 audit(1336554543.010:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1752 comm="apparmor_parser" [ 67.760822] type=1400 audit(1336554543.562:16): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1756 comm="apparmor_parser" [ 67.761133] type=1400 audit(1336554543.562:17): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1756 comm="apparmor_parser" [ 67.774691] tg3 0000:18:00.0: eth0: Link is up at 100 Mbps, full duplex [ 67.774694] tg3 0000:18:00.0: eth0: Flow control is on for TX and on for RX [ 67.775157] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 73.049310] audit_printk_skb: 9 callbacks suppressed [ 73.049313] type=1400 audit(1336554548.850:21): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1728 comm="apparmor_parser" [ 73.050108] type=1400 audit(1336554548.850:22): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=1728 comm="apparmor_parser" [ 73.050397] type=1400 audit(1336554548.850:23): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=1728 comm="apparmor_parser" [ 73.051105] type=1400 audit(1336554548.850:24): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1728 comm="apparmor_parser" [ 73.051668] type=1400 audit(1336554548.850:25): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=1728 comm="apparmor_parser" [ 73.051960] type=1400 audit(1336554548.850:26): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=1728 comm="apparmor_parser" [ 73.052525] type=1400 audit(1336554548.854:27): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1728 comm="apparmor_parser" [ 73.052929] type=1400 audit(1336554548.854:28): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=1728 comm="apparmor_parser" [ 73.210075] init: lightdm main process (1953) killed by TERM signal [ 74.540700] tg3 0000:18:00.0: eth0: Link is down [ 74.721379] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 74.721995] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 74.722145] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 74.722291] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 74.722336] ehci_hcd 0000:00:1d.7: PME# enabled [ 74.864106] ehci_hcd 0000:00:1d.7: BAR 0: set to [mem 0xe4808000-0xe48083ff] (PCI address [0xe4808000-0xe48083ff]) [ 74.864123] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 74.864148] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 74.864185] ehci_hcd 0000:00:1d.7: PME# disabled [ 74.864197] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 74.864204] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 74.917367] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 74.917375] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 74.959267] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 74.959277] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 74.997175] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 74.997184] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 75.113340] init: plymouth-stop pre-start process (2640) terminated with status 1 [ 76.230846] tg3 0000:18:00.0: eth0: Link is up at 100 Mbps, full duplex [ 76.230849] tg3 0000:18:00.0: eth0: Flow control is on for TX and on for RX [ 78.440064] eth0: no IPv6 routers present [ 142.808154] usb 2-1: new high-speed USB device number 3 using ehci_hcd [ 143.025020] Initializing USB Mass Storage driver... [ 143.025155] scsi5 : usb-storage 2-1:1.0 [ 143.025230] usbcore: registered new interface driver usb-storage [ 143.025232] USB Mass Storage support registered. [ 143.068206] usbcore: registered new interface driver uas [ 144.246124] scsi 5:0:0:0: Direct-Access Intenso Rainbow Line PQ: 0 ANSI: 4 [ 144.248125] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 144.252698] sd 5:0:0:0: [sdb] 31129600 512-byte logical blocks: (15.9 GB/14.8 GiB) [ 144.253277] sd 5:0:0:0: [sdb] Write Protect is off [ 144.253286] sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 144.254340] sd 5:0:0:0: [sdb] No Caching mode page present [ 144.254348] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 144.257894] sd 5:0:0:0: [sdb] No Caching mode page present [ 144.257903] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 144.258706] sdb: sdb1 [ 144.261135] sd 5:0:0:0: [sdb] No Caching mode page present [ 144.261137] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 144.261140] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 283.499286] usb 2-1: USB disconnect, device number 3 [ 283.508050] sd 5:0:0:0: [sdb] Unhandled error code [ 283.508053] sd 5:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 283.508057] sd 5:0:0:0: [sdb] CDB: Write(10): 2a 00 00 03 c6 98 00 00 f0 00 [ 283.508066] end_request: I/O error, dev sdb, sector 247448 [ 283.508069] Buffer I/O error on device sdb, logical block 30931 [ 283.508071] lost page write due to I/O error on sdb [ 283.508075] Buffer I/O error on device sdb, logical block 30932 [ 283.508077] lost page write due to I/O error on sdb [ 283.508079] Buffer I/O error on device sdb, logical block 30933 [ 283.508081] lost page write due to I/O error on sdb [ 283.508083] Buffer I/O error on device sdb, logical block 30934 [ 283.508084] lost page write due to I/O error on sdb [ 283.508087] Buffer I/O error on device sdb, logical block 30935 [ 283.508088] lost page write due to I/O error on sdb [ 283.508090] Buffer I/O error on device sdb, logical block 30936 [ 283.508092] lost page write due to I/O error on sdb [ 283.508094] Buffer I/O error on device sdb, logical block 30937 [ 283.508096] lost page write due to I/O error on sdb [ 283.508098] Buffer I/O error on device sdb, logical block 30938 [ 283.508099] lost page write due to I/O error on sdb [ 283.508102] Buffer I/O error on device sdb, logical block 30939 [ 283.508103] lost page write due to I/O error on sdb [ 283.508105] Buffer I/O error on device sdb, logical block 30940 [ 283.508107] lost page write due to I/O error on sdb [ 283.508133] sd 5:0:0:0: [sdb] Unhandled error code [ 283.508135] sd 5:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 283.508138] sd 5:0:0:0: [sdb] CDB: Write(10): 2a 00 00 03 c7 88 00 00 f0 00 [ 283.508145] end_request: I/O error, dev sdb, sector 247688 [ 283.656081] sdb: detected capacity change from 15938355200 to 0 [ 284.584148] usb 2-3: new high-speed USB device number 4 using ehci_hcd [ 284.719012] scsi6 : usb-storage 2-3:1.0 [ 285.944761] scsi 6:0:0:0: Direct-Access Intenso Rainbow Line PQ: 0 ANSI: 4 [ 285.946514] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 285.950154] sd 6:0:0:0: [sdb] 31129600 512-byte logical blocks: (15.9 GB/14.8 GiB) [ 285.950819] sd 6:0:0:0: [sdb] Write Protect is off [ 285.950828] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 285.951415] sd 6:0:0:0: [sdb] No Caching mode page present [ 285.951423] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 285.954796] sd 6:0:0:0: [sdb] No Caching mode page present [ 285.954805] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 285.957174] sdb: unknown partition table [ 285.959672] sd 6:0:0:0: [sdb] No Caching mode page present [ 285.959674] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 285.959677] sd 6:0:0:0: [sdb] Attached SCSI removable disk