[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4.0-1-generic (buildd@crested) (gcc version 4.7.0 (Ubuntu/Linaro 4.7.0-7ubuntu2) ) #3-Ubuntu SMP Wed May 2 17:56:12 UTC 2012 (Ubuntu 3.4.0-1.3-generic 3.4.0-rc5) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.4.0-1-generic root=/dev/mapper/sda2_crypt ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf7b0000 (usable) [ 0.000000] BIOS-e820: 00000000bf7b0000 - 00000000bf7c5400 (reserved) [ 0.000000] BIOS-e820: 00000000bf7c5400 - 00000000bf7e7fb8 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf7e7fb8 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Hewlett-Packard HP Compaq 6710b (KE124EA#ABD)/30C0, BIOS 68DDU Ver. F.15 01/15/2009 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 100000000 mask FC0000000 write-back [ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable [ 0.000000] 4 base 0FEDA0000 mask FFFFE0000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 4GB, range: 1GB, type WB [ 0.000000] reg 3, base: 3064MB, range: 8MB, type UC [ 0.000000] reg 4, base: 4175488KB, range: 128KB, type UC [ 0.000000] total RAM covered: 4088M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 4 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3064MB, range: 8MB, type UC [ 0.000000] reg 3, base: 4GB, range: 1GB, type WB [ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbf7b0 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf7b0000 [ 0.000000] 0000000000 - 00bf600000 page 2M [ 0.000000] 00bf600000 - 00bf7b0000 page 4k [ 0.000000] kernel direct mapping tables up to bf7b0000 @ 1fffb000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000 [ 0.000000] 0100000000 - 0140000000 page 2M [ 0.000000] kernel direct mapping tables up to 140000000 @ bf7aa000-bf7b0000 [ 0.000000] RAMDISK: 356a6000 - 36b4b000 [ 0.000000] ACPI: RSDP 00000000000f72c0 00024 (v02 HP ) [ 0.000000] ACPI: XSDT 00000000bf7c81cc 00084 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: FACP 00000000bf7c8084 000F4 (v04 HP 30C0 00000003 HP 00000001) [ 0.000000] ACPI: DSDT 00000000bf7c84d8 1313E (v01 HP nc75xx 00010000 MSFT 03000001) [ 0.000000] ACPI: FACS 00000000bf7e7d80 00040 [ 0.000000] ACPI: SLIC 00000000bf7c8250 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: HPET 00000000bf7c83c8 00038 (v01 HP 30C0 00000001 HP 00000001) [ 0.000000] ACPI: APIC 00000000bf7c8400 00068 (v01 HP 30C0 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 00000000bf7c8468 0003C (v01 HP 30C0 00000001 HP 00000001) [ 0.000000] ACPI: TCPA 00000000bf7c84a4 00032 (v02 HP 30C0 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 00000000bf7db616 00059 (v01 HP HPQNLP 00000001 MSFT 03000001) [ 0.000000] ACPI: SSDT 00000000bf7db66f 00328 (v01 HP HPQSAT 00000001 MSFT 03000001) [ 0.000000] ACPI: SSDT 00000000bf7db997 0014E (v01 HP HPQPRN 00000001 MSFT 03000001) [ 0.000000] ACPI: SSDT 00000000bf7dc4ab 0025F (v01 HP Cpu0Tst 00003000 INTL 20060317) [ 0.000000] ACPI: SSDT 00000000bf7dc70a 000A6 (v01 HP Cpu1Tst 00003000 INTL 20060317) [ 0.000000] ACPI: SSDT 00000000bf7dc7b0 004D7 (v01 HP CpuPm 00003000 INTL 20060317) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000140000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] NODE_DATA [000000013fffc000 - 000000013fffffff] [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bf7b0 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 1046335 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3914 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 763888 pages, LIFO batch:31 [ 0.000000] Normal zone: 4096 pages used for memmap [ 0.000000] Normal zone: 258048 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bf7b0000 - 00000000bf7c5000 [ 0.000000] PM: Registered nosave memory: 00000000bf7c5000 - 00000000bf7c6000 [ 0.000000] PM: Registered nosave memory: 00000000bf7c6000 - 00000000bf7e7000 [ 0.000000] PM: Registered nosave memory: 00000000bf7e7000 - 00000000bf7e8000 [ 0.000000] PM: Registered nosave memory: 00000000bf7e8000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fed9a000 [ 0.000000] PM: Registered nosave memory: 00000000fed9a000 - 00000000feda0000 [ 0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000fedc0000 [ 0.000000] PM: Registered nosave memory: 00000000fedc0000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000 [ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 00000000ffc00000 [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s83392 r8192 d23104 u1048576 [ 0.000000] pcpu-alloc: s83392 r8192 d23104 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1025850 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.4.0-1-generic root=/dev/mapper/sda2_crypt ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 4016528k/5242880k available (6692k kernel code, 1057540k absent, 168812k reserved, 6489k data, 912k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:512 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2493.810 MHz processor. [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4987.62 BogoMIPS (lpj=9975240) [ 0.004009] pid_max: default: 32768 minimum: 301 [ 0.004035] Security Framework initialized [ 0.004054] AppArmor: AppArmor initialized [ 0.004055] Yama: becoming mindful. [ 0.004402] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.006845] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.008164] Mount-cache hash table entries: 256 [ 0.008394] Initializing cgroup subsys cpuacct [ 0.008397] Initializing cgroup subsys memory [ 0.008407] Initializing cgroup subsys devices [ 0.008410] Initializing cgroup subsys freezer [ 0.008412] Initializing cgroup subsys blkio [ 0.008419] Initializing cgroup subsys perf_event [ 0.008449] CPU: Physical Processor ID: 0 [ 0.008450] CPU: Processor Core ID: 0 [ 0.008452] mce: CPU supports 6 MCE banks [ 0.008461] CPU0: Thermal monitoring enabled (TM2) [ 0.008465] using mwait in idle threads. [ 0.010991] ACPI: Core revision 20120320 [ 0.020011] ftrace: allocating 25045 entries in 98 pages [ 0.028473] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.071073] CPU0: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz stepping 06 [ 0.072003] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.072003] ... version: 2 [ 0.072003] ... bit width: 40 [ 0.072003] ... generic registers: 2 [ 0.072003] ... value mask: 000000ffffffffff [ 0.072003] ... max period: 000000007fffffff [ 0.072003] ... fixed-purpose events: 3 [ 0.072003] ... event mask: 0000000700000003 [ 0.072003] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.072003] Booting Node 0, Processors #1 Ok. [ 0.080037] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.080088] Brought up 2 CPUs [ 0.080090] Total of 2 processors activated (9975.24 BogoMIPS). [ 0.084096] devtmpfs: initialized [ 0.084415] EVM: security.selinux [ 0.084417] EVM: security.SMACK64 [ 0.084418] EVM: security.capability [ 0.084433] PM: Registering ACPI NVS region [mem 0xbf7c5400-0xbf7e7fb7] (142264 bytes) [ 0.084720] dummy: [ 0.084753] RTC time: 11:28:23, date: 05/09/12 [ 0.084784] NET: Registered protocol family 16 [ 0.084822] Trying to unpack rootfs image as initramfs... [ 0.084950] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.084952] ACPI: bus type pci registered [ 0.085008] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.085010] PCI: not using MMCONFIG [ 0.085012] PCI: Using configuration type 1 for base access [ 0.085929] bio: create slab at 0 [ 0.086004] ACPI: Added _OSI(Module Device) [ 0.086006] ACPI: Added _OSI(Processor Device) [ 0.086008] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.086009] ACPI: Added _OSI(Processor Aggregator Device) [ 0.089388] ACPI: EC: Look up EC in DSDT [ 0.450708] Freeing initrd memory: 21140k freed [ 0.478462] ACPI: SSDT 00000000bf7dbbad 0027F (v01 HP Cpu0Ist 00003000 INTL 20060317) [ 0.478462] ACPI: Dynamic OEM Table Load: [ 0.478462] ACPI: SSDT (null) 0027F (v01 HP Cpu0Ist 00003000 INTL 20060317) [ 0.478462] ACPI: SSDT 00000000bf7dbeb1 005FA (v01 HP Cpu0Cst 00003001 INTL 20060317) [ 0.478462] ACPI: Dynamic OEM Table Load: [ 0.478462] ACPI: SSDT (null) 005FA (v01 HP Cpu0Cst 00003001 INTL 20060317) [ 0.478462] ACPI: SSDT 00000000bf7dbae5 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317) [ 0.478617] ACPI: Dynamic OEM Table Load: [ 0.478620] ACPI: SSDT (null) 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317) [ 0.478683] ACPI: SSDT 00000000bf7dbe2c 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317) [ 0.480135] ACPI: Dynamic OEM Table Load: [ 0.480137] ACPI: SSDT (null) 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317) [ 0.512092] ACPI: Interpreter enabled [ 0.512097] ACPI: (supports S0 S3 S4 S5) [ 0.512113] ACPI: Using IOAPIC for interrupt routing [ 0.512138] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.512576] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.520774] ACPI: Power Resource [C272] (on) [ 0.521121] ACPI: Power Resource [C27F] (on) [ 0.521664] ACPI: Power Resource [C29B] (on) [ 0.523931] ACPI: Power Resource [C1C5] (off) [ 0.525447] ACPI: Power Resource [C3BC] (off) [ 0.525496] ACPI: Power Resource [C3BD] (off) [ 0.525541] ACPI: Power Resource [C3BE] (off) [ 0.525589] ACPI: Power Resource [C3BF] (off) [ 0.525634] ACPI: Power Resource [C3C0] (off) [ 0.526111] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.526111] ACPI: No dock devices found. [ 0.526111] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.528421] ACPI: PCI Root Bridge [C003] (domain 0000 [bus 00-ff]) [ 0.532413] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.532416] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.532418] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.532420] pci_root PNP0A08:00: host bridge window [mem 0xbf800000-0xfedfffff] [ 0.532422] pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff] [ 0.532425] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.532456] PCI host bridge to bus 0000:00 [ 0.532458] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.532460] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.532462] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.532464] pci_bus 0000:00: root bus resource [mem 0xbf800000-0xfedfffff] [ 0.532466] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff] [ 0.532469] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 0.532479] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000 [ 0.532527] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000 [ 0.532539] pci 0000:00:02.0: reg 10: [mem 0xe4600000-0xe46fffff 64bit] [ 0.532547] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.532553] pci 0000:00:02.0: reg 20: [io 0x4000-0x4007] [ 0.532589] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000 [ 0.532599] pci 0000:00:02.1: reg 10: [mem 0xe4700000-0xe47fffff 64bit] [ 0.532685] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300 [ 0.532739] pci 0000:00:1a.0: reg 20: [io 0x4020-0x403f] [ 0.532781] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300 [ 0.532836] pci 0000:00:1a.1: reg 20: [io 0x4040-0x405f] [ 0.532892] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320 [ 0.532915] pci 0000:00:1a.7: reg 10: [mem 0xe4800000-0xe48003ff] [ 0.533019] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.533054] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300 [ 0.533075] pci 0000:00:1b.0: reg 10: [mem 0xe4804000-0xe4807fff 64bit] [ 0.533176] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.533209] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400 [ 0.533314] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.533350] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400 [ 0.533457] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.533491] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400 [ 0.533597] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.533633] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400 [ 0.533739] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.533774] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300 [ 0.533827] pci 0000:00:1d.0: reg 20: [io 0x4060-0x407f] [ 0.533870] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300 [ 0.533923] pci 0000:00:1d.1: reg 20: [io 0x4080-0x409f] [ 0.533966] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300 [ 0.534020] pci 0000:00:1d.2: reg 20: [io 0x40a0-0x40bf] [ 0.534076] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320 [ 0.534099] pci 0000:00:1d.7: reg 10: [mem 0xe4808000-0xe48083ff] [ 0.534202] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.534229] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.534326] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100 [ 0.534437] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.534444] pci 0000:00:1f.0: quirk: [io 0x1100-0x113f] claimed by ICH6 GPIO [ 0.534448] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f) [ 0.534456] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007) [ 0.534511] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a [ 0.534528] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.534539] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.534551] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 0.534562] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 0.534573] pci 0000:00:1f.1: reg 20: [io 0x40c0-0x40cf] [ 0.534626] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601 [ 0.534652] pci 0000:00:1f.2: reg 10: [io 0x13f0-0x13f7] [ 0.534663] pci 0000:00:1f.2: reg 14: [io 0x15f4-0x15f7] [ 0.534674] pci 0000:00:1f.2: reg 18: [io 0x1370-0x1377] [ 0.534686] pci 0000:00:1f.2: reg 1c: [io 0x1574-0x1577] [ 0.534697] pci 0000:00:1f.2: reg 20: [io 0x4100-0x411f] [ 0.534709] pci 0000:00:1f.2: reg 24: [mem 0xe4809000-0xe48097ff] [ 0.534773] pci 0000:00:1f.2: PME# supported from D3hot [ 0.534853] pci 0000:00:1c.0: PCI bridge to [bus 08-08] [ 0.535029] pci 0000:10:00.0: [8086:4222] type 00 class 0x028000 [ 0.535084] pci 0000:10:00.0: reg 10: [mem 0xe4100000-0xe4100fff] [ 0.535500] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold [ 0.544109] pci 0000:00:1c.1: PCI bridge to [bus 10-10] [ 0.544117] pci 0000:00:1c.1: bridge window [mem 0xe4100000-0xe41fffff] [ 0.544253] pci 0000:18:00.0: [14e4:1693] type 00 class 0x020000 [ 0.544285] pci 0000:18:00.0: reg 10: [mem 0xe4000000-0xe400ffff 64bit] [ 0.544467] pci 0000:18:00.0: PME# supported from D3hot D3cold [ 0.552089] pci 0000:00:1c.2: PCI bridge to [bus 18-18] [ 0.552097] pci 0000:00:1c.2: bridge window [mem 0xe4000000-0xe40fffff] [ 0.552161] pci 0000:00:1c.4: PCI bridge to [bus 28-28] [ 0.552166] pci 0000:00:1c.4: bridge window [io 0x2000-0x3fff] [ 0.552171] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xe3ffffff] [ 0.552231] pci 0000:02:04.0: [1180:0476] type 02 class 0x060700 [ 0.552259] pci 0000:02:04.0: reg 10: [mem 0xe4200000-0xe4200fff] [ 0.552302] pci 0000:02:04.0: supports D1 D2 [ 0.552304] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.552333] pci 0000:02:04.1: [1180:0832] type 00 class 0x0c0010 [ 0.552360] pci 0000:02:04.1: reg 10: [mem 0xe4201000-0xe42017ff] [ 0.552479] pci 0000:02:04.1: supports D1 D2 [ 0.552481] pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.552559] pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode) [ 0.552566] pci 0000:00:1e.0: bridge window [mem 0xe4200000-0xe45fffff] [ 0.552574] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.552576] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.552578] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.552581] pci 0000:00:1e.0: bridge window [mem 0xbf800000-0xfedfffff] (subtractive decode) [ 0.552583] pci 0000:00:1e.0: bridge window [mem 0xfee01000-0xffffffff] (subtractive decode) [ 0.552585] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.552639] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03] [ 0.552674] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT] [ 0.552800] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B0._PRT] [ 0.552852] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11D._PRT] [ 0.552882] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C131._PRT] [ 0.552915] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C132._PRT] [ 0.552949] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C134._PRT] [ 0.553009] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.553012] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.553013] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.565316] ACPI: PCI Interrupt Link [C12D] (IRQs 10 11) *5 [ 0.565382] ACPI: PCI Interrupt Link [C12E] (IRQs *10 11) [ 0.565445] ACPI: PCI Interrupt Link [C12F] (IRQs 10 *11) [ 0.565503] ACPI: PCI Interrupt Link [C130] (IRQs 10 11) *0, disabled. [ 0.565566] ACPI: PCI Interrupt Link [C140] (IRQs *10 11) [ 0.565629] ACPI: PCI Interrupt Link [C141] (IRQs *10 11) [ 0.565686] ACPI: PCI Interrupt Link [C142] (IRQs 10 11) *0, disabled. [ 0.565715] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20120320/pci_link-184) [ 0.565802] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.565802] vgaarb: loaded [ 0.565802] vgaarb: bridge control possible 0000:00:02.0 [ 0.565802] i2c-core: driver [tps65090] using legacy suspend method [ 0.565802] i2c-core: driver [tps65090] using legacy resume method [ 0.565802] SCSI subsystem initialized [ 0.565802] libata version 3.00 loaded. [ 0.565802] usbcore: registered new interface driver usbfs [ 0.565802] usbcore: registered new interface driver hub [ 0.565802] usbcore: registered new device driver usb [ 0.565802] PCI: Using ACPI for IRQ routing [ 0.570023] PCI: pci_cache_line_size set to 64 bytes [ 0.570224] Expanded resource reserved due to conflict with PCI Bus 0000:00 [ 0.570227] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.570229] reserve RAM buffer: 00000000bf7b0000 - 00000000bfffffff [ 0.570330] NetLabel: Initializing [ 0.570332] NetLabel: domain hash size = 128 [ 0.570333] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.570345] NetLabel: unlabeled traffic allowed by default [ 0.570361] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.570361] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.570361] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.576049] Switching to clocksource hpet [ 0.583639] AppArmor: AppArmor Filesystem Enabled [ 0.583664] pnp: PnP ACPI init [ 0.583680] ACPI: bus type pnp registered [ 0.583766] pnp 00:00: [mem 0x00000000-0x0009ffff] [ 0.583768] pnp 00:00: [mem 0x000e0000-0x000fffff] [ 0.583770] pnp 00:00: [mem 0x00100000-0xbf7fffff] [ 0.583821] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.583824] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.583827] system 00:00: [mem 0x00100000-0xbf7fffff] could not be reserved [ 0.583830] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.585865] pnp 00:01: [bus 00-ff] [ 0.585868] pnp 00:01: [io 0x0cf8-0x0cff] [ 0.585870] pnp 00:01: [io 0x0000-0x0cf7 window] [ 0.585872] pnp 00:01: [io 0x0d00-0xffff window] [ 0.585874] pnp 00:01: [mem 0x000a0000-0x000bffff window] [ 0.585876] pnp 00:01: [mem 0xbf800000-0xfedfffff window] [ 0.585878] pnp 00:01: [mem 0xfee01000-0xffffffff window] [ 0.585880] pnp 00:01: [mem 0x000d0000-0x000dffff window] [ 0.585953] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.586314] pnp 00:02: [io 0x03f8-0x03ff] [ 0.586328] pnp 00:02: [irq 4] [ 0.586376] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) [ 0.586699] pnp 00:03: [io 0x0378-0x037f] [ 0.586701] pnp 00:03: [io 0x0778-0x077a] [ 0.586707] pnp 00:03: [irq 7] [ 0.586709] pnp 00:03: [dma 1] [ 0.586789] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.586853] pnp 00:04: [io 0x0560-0x056f] [ 0.586855] pnp 00:04: [io 0x0570-0x057f] [ 0.586856] pnp 00:04: [mem 0xfed40000-0xfed44fff] [ 0.586879] pnp 00:04: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.586888] pnp 00:05: [io 0x00f0-0x00ff] [ 0.586893] pnp 00:05: [irq 13] [ 0.586918] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.586928] pnp 00:06: [io 0x0000-0x000f] [ 0.586930] pnp 00:06: [io 0x0080-0x008f] [ 0.586931] pnp 00:06: [io 0x00c0-0x00df] [ 0.586933] pnp 00:06: [dma 4] [ 0.586954] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.586961] pnp 00:07: [io 0x0061] [ 0.586986] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.586996] pnp 00:08: [io 0x0070-0x0071] [ 0.586998] pnp 00:08: [io 0x0072-0x0073] [ 0.587003] pnp 00:08: [irq 8] [ 0.587027] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.587077] pnp 00:09: [mem 0xfed00000-0xfed003ff] [ 0.587100] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.587109] pnp 00:0a: [io 0x0060] [ 0.587111] pnp 00:0a: [io 0x0064] [ 0.587116] pnp 00:0a: [irq 1] [ 0.587143] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.587155] pnp 00:0b: [irq 12] [ 0.587179] pnp 00:0b: Plug and Play ACPI device, IDs SYN0134 SYN0100 SYN0002 PNP0f13 (active) [ 0.587272] pnp 00:0c: [io 0x0010-0x001f] [ 0.587274] pnp 00:0c: [io 0x0024-0x003f] [ 0.587276] pnp 00:0c: [io 0x004e-0x004f] [ 0.587278] pnp 00:0c: [io 0x0050-0x0053] [ 0.587279] pnp 00:0c: [io 0x0063] [ 0.587281] pnp 00:0c: [io 0x0065] [ 0.587282] pnp 00:0c: [io 0x0067] [ 0.587284] pnp 00:0c: [io 0x0074-0x0077] [ 0.587286] pnp 00:0c: [io 0x0090-0x009f] [ 0.587287] pnp 00:0c: [io 0x00a4-0x00bd] [ 0.587289] pnp 00:0c: [io 0x0500-0x055f] [ 0.587291] pnp 00:0c: [io 0x0800-0x080f] [ 0.587292] pnp 00:0c: [mem 0xffb00000-0xffbfffff] [ 0.587294] pnp 00:0c: [mem 0xfff00000-0xffffffff] [ 0.587344] system 00:0c: [io 0x0500-0x055f] has been reserved [ 0.587347] system 00:0c: [io 0x0800-0x080f] has been reserved [ 0.587349] system 00:0c: [mem 0xffb00000-0xffbfffff] has been reserved [ 0.587352] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved [ 0.587355] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.587816] pnp 00:0d: [irq 23] [ 0.587856] pnp 00:0d: Plug and Play ACPI device, IDs HPQ0004 (active) [ 0.587874] pnp 00:0e: [io 0x04d0-0x04d1] [ 0.587876] pnp 00:0e: [io 0x1000-0x107f] [ 0.587878] pnp 00:0e: [io 0x1100-0x113f] [ 0.587879] pnp 00:0e: [io 0x1200-0x121f] [ 0.587881] pnp 00:0e: [mem 0xf8000000-0xfbffffff] [ 0.587883] pnp 00:0e: [mem 0xfec00000-0xfec000ff] [ 0.587885] pnp 00:0e: [mem 0xfed20000-0xfed3ffff] [ 0.587887] pnp 00:0e: [mem 0xfed45000-0xfed8ffff] [ 0.587891] pnp 00:0e: [mem 0xfed90000-0xfed99fff] [ 0.587952] system 00:0e: [io 0x04d0-0x04d1] has been reserved [ 0.587955] system 00:0e: [io 0x1000-0x107f] has been reserved [ 0.587957] system 00:0e: [io 0x1100-0x113f] has been reserved [ 0.587959] system 00:0e: [io 0x1200-0x121f] has been reserved [ 0.587962] system 00:0e: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.587964] system 00:0e: [mem 0xfec00000-0xfec000ff] could not be reserved [ 0.587967] system 00:0e: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.587970] system 00:0e: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.587972] system 00:0e: [mem 0xfed90000-0xfed99fff] has been reserved [ 0.587975] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.588543] pnp 00:0f: [mem 0x000cee00-0x000cffff] [ 0.588545] pnp 00:0f: [mem 0xfeda0000-0xfedbffff] [ 0.588547] pnp 00:0f: [mem 0xfee00000-0xfee00fff] [ 0.588605] system 00:0f: [mem 0x000cee00-0x000cffff] has been reserved [ 0.588608] system 00:0f: [mem 0xfeda0000-0xfedbffff] has been reserved [ 0.588610] system 00:0f: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.588613] system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.588626] pnp: PnP ACPI: found 16 devices [ 0.588627] ACPI: ACPI bus type pnp unregistered [ 0.595404] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 10-10] add_size 1000 [ 0.595408] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 10-10] add_size 200000 [ 0.595420] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 18-18] add_size 1000 [ 0.595423] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 18-18] add_size 200000 [ 0.595435] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 28-28] add_size 200000 [ 0.595454] pci 0000:02:04.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.595457] pci 0000:02:04.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.595460] pci 0000:00:1e.0: bridge window [io 0x1000-0x0fff] to [bus 02-03] add_size 1000 [ 0.595462] pci 0000:02:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.595465] pci 0000:00:1e.0: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 02-03] add_size 4000000 [ 0.595472] pci 0000:00:1e.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.595474] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.595477] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.595480] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.595482] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.595485] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.595487] pci 0000:00:1e.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.595492] pci 0000:00:1e.0: BAR 15: assigned [mem 0xc0000000-0xc3ffffff pref] [ 0.595495] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc4000000-0xc41fffff 64bit pref] [ 0.595498] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc4200000-0xc43fffff 64bit pref] [ 0.595501] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc4400000-0xc45fffff 64bit pref] [ 0.595504] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff] [ 0.595507] pci 0000:00:1c.2: BAR 13: assigned [io 0x6000-0x6fff] [ 0.595510] pci 0000:00:1e.0: BAR 13: assigned [io 0x7000-0x7fff] [ 0.595513] pci 0000:00:1c.0: PCI bridge to [bus 08-08] [ 0.595527] pci 0000:00:1c.1: PCI bridge to [bus 10-10] [ 0.595531] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff] [ 0.595537] pci 0000:00:1c.1: bridge window [mem 0xe4100000-0xe41fffff] [ 0.595542] pci 0000:00:1c.1: bridge window [mem 0xc4000000-0xc41fffff 64bit pref] [ 0.595550] pci 0000:00:1c.2: PCI bridge to [bus 18-18] [ 0.595553] pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff] [ 0.595559] pci 0000:00:1c.2: bridge window [mem 0xe4000000-0xe40fffff] [ 0.595564] pci 0000:00:1c.2: bridge window [mem 0xc4200000-0xc43fffff 64bit pref] [ 0.595572] pci 0000:00:1c.4: PCI bridge to [bus 28-28] [ 0.595575] pci 0000:00:1c.4: bridge window [io 0x2000-0x3fff] [ 0.595581] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xe3ffffff] [ 0.595586] pci 0000:00:1c.4: bridge window [mem 0xc4400000-0xc45fffff 64bit pref] [ 0.595595] pci 0000:02:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.595598] pci 0000:02:04.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000 [ 0.595600] pci 0000:02:04.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.595603] pci 0000:02:04.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.595605] pci 0000:02:04.0: BAR 15: assigned [mem 0xc0000000-0xc3ffffff pref] [ 0.595608] pci 0000:02:04.0: BAR 16: assigned [mem 0xc8000000-0xcbffffff] [ 0.595610] pci 0000:02:04.0: BAR 13: assigned [io 0x7000-0x70ff] [ 0.595613] pci 0000:02:04.0: BAR 14: assigned [io 0x7400-0x74ff] [ 0.595615] pci 0000:02:04.0: CardBus bridge to [bus 03-06] [ 0.595617] pci 0000:02:04.0: bridge window [io 0x7000-0x70ff] [ 0.595622] pci 0000:02:04.0: bridge window [io 0x7400-0x74ff] [ 0.595628] pci 0000:02:04.0: bridge window [mem 0xc0000000-0xc3ffffff pref] [ 0.595634] pci 0000:02:04.0: bridge window [mem 0xc8000000-0xcbffffff] [ 0.595639] pci 0000:00:1e.0: PCI bridge to [bus 02-03] [ 0.595643] pci 0000:00:1e.0: bridge window [io 0x7000-0x7fff] [ 0.595649] pci 0000:00:1e.0: bridge window [mem 0xe4200000-0xe45fffff] [ 0.595654] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc3ffffff pref] [ 0.595699] pci 0000:00:1e.0: setting latency timer to 64 [ 0.595712] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.595714] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.595716] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.595718] pci_bus 0000:00: resource 7 [mem 0xbf800000-0xfedfffff] [ 0.595719] pci_bus 0000:00: resource 8 [mem 0xfee01000-0xffffffff] [ 0.595721] pci_bus 0000:00: resource 9 [mem 0x000d0000-0x000dffff] [ 0.595724] pci_bus 0000:10: resource 0 [io 0x5000-0x5fff] [ 0.595726] pci_bus 0000:10: resource 1 [mem 0xe4100000-0xe41fffff] [ 0.595728] pci_bus 0000:10: resource 2 [mem 0xc4000000-0xc41fffff 64bit pref] [ 0.595730] pci_bus 0000:18: resource 0 [io 0x6000-0x6fff] [ 0.595732] pci_bus 0000:18: resource 1 [mem 0xe4000000-0xe40fffff] [ 0.595734] pci_bus 0000:18: resource 2 [mem 0xc4200000-0xc43fffff 64bit pref] [ 0.595736] pci_bus 0000:28: resource 0 [io 0x2000-0x3fff] [ 0.595738] pci_bus 0000:28: resource 1 [mem 0xe0000000-0xe3ffffff] [ 0.595740] pci_bus 0000:28: resource 2 [mem 0xc4400000-0xc45fffff 64bit pref] [ 0.595742] pci_bus 0000:02: resource 0 [io 0x7000-0x7fff] [ 0.595744] pci_bus 0000:02: resource 1 [mem 0xe4200000-0xe45fffff] [ 0.595746] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc3ffffff pref] [ 0.595748] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] [ 0.595750] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] [ 0.595752] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] [ 0.595754] pci_bus 0000:02: resource 7 [mem 0xbf800000-0xfedfffff] [ 0.595756] pci_bus 0000:02: resource 8 [mem 0xfee01000-0xffffffff] [ 0.595758] pci_bus 0000:02: resource 9 [mem 0x000d0000-0x000dffff] [ 0.595760] pci_bus 0000:03: resource 0 [io 0x7000-0x70ff] [ 0.595762] pci_bus 0000:03: resource 1 [io 0x7400-0x74ff] [ 0.595764] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xc3ffffff pref] [ 0.595766] pci_bus 0000:03: resource 3 [mem 0xc8000000-0xcbffffff] [ 0.595809] NET: Registered protocol family 2 [ 0.595934] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.597072] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.601300] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.601876] TCP: Hash tables configured (established 524288 bind 65536) [ 0.601879] TCP: reno registered [ 0.601888] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.601931] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.602074] NET: Registered protocol family 1 [ 0.602096] pci 0000:00:02.0: Boot video device [ 0.602441] PCI: CLS 64 bytes, default 64 [ 0.602445] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.602447] Placing 64MB software IO TLB between ffff8800bb7aa000 - ffff8800bf7aa000 [ 0.602449] software IO TLB at phys 0xbb7aa000 - 0xbf7aa000 [ 0.602878] audit: initializing netlink socket (disabled) [ 0.602890] type=2000 audit(1336562902.596:1): initialized [ 0.621895] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.623853] VFS: Disk quotas dquot_6.5.2 [ 0.623895] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.624363] fuse init (API version 7.18) [ 0.624445] msgmni has been set to 7886 [ 0.624829] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.624861] io scheduler noop registered [ 0.624863] io scheduler deadline registered [ 0.624906] io scheduler cfq registered (default) [ 0.625055] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.625181] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.625309] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X [ 0.625433] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X [ 0.625525] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.625543] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.625591] intel_idle: does not run on family 6 model 23 [ 0.629244] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.629328] ACPI: AC Adapter [C239] (on-line) [ 0.629521] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 0.629527] ACPI: Sleep Button [C2BF] [ 0.629564] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 0.629593] ACPI: Lid Switch [C153] [ 0.629633] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.629636] ACPI: Power Button [PWRF] [ 0.629713] ACPI: Fan [C3C1] (off) [ 0.629758] ACPI: Fan [C3C2] (off) [ 0.629800] ACPI: Fan [C3C3] (off) [ 0.629844] ACPI: Fan [C3C4] (off) [ 0.629884] ACPI: Fan [C3C5] (off) [ 0.629929] ACPI: Requesting acpi_cpufreq [ 0.631192] Monitor-Mwait will be used to enter C-1 state [ 0.631221] Monitor-Mwait will be used to enter C-2 state [ 0.631228] Marking TSC unstable due to TSC halts in idle [ 0.631238] ACPI: acpi_idle registered with cpuidle [ 0.638008] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.638010] ACPI: Thermal Zone [TZ3] (49 C) [ 0.647481] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.647483] ACPI: Thermal Zone [TZ4] (29 C) [ 0.651236] thermal LNXTHERM:02: registered as thermal_zone2 [ 0.651238] ACPI: Thermal Zone [TZ5] (50 C) [ 0.671287] thermal LNXTHERM:03: registered as thermal_zone3 [ 0.671289] ACPI: Thermal Zone [TZ1] (67 C) [ 0.671313] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.671320] ACPI: Battery Slot [C23B] (battery present) [ 0.671327] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.671336] ACPI: Battery Slot [C23A] (battery absent) [ 0.671377] GHES: HEST is not enabled! [ 0.671436] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.692036] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.692071] ACPI: Battery Slot [C23A] (battery absent) [ 0.713661] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.713925] Linux agpgart interface v0.103 [ 0.713987] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 0.714085] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 0.715734] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 0.715956] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.717242] brd: module loaded [ 0.717899] loop: module loaded [ 0.718023] ahci 0000:00:1f.2: version 3.0 [ 0.718084] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X [ 0.718119] ahci: SSS flag set, parallel bus scan disabled [ 0.718141] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode [ 0.718144] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc [ 0.718149] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.718447] scsi0 : ahci [ 0.718524] scsi1 : ahci [ 0.718624] scsi2 : ahci [ 0.718687] ata2: SATA max UDMA/133 abar m2048@0xe4809000 port 0xe4809100 irq 44 [ 0.718689] ata3: DUMMY [ 0.718691] ata4: DUMMY [ 0.718762] ata_piix 0000:00:1f.1: version 2.13 [ 0.718796] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.719052] scsi3 : ata_piix [ 0.719112] scsi4 : ata_piix [ 0.719405] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40c0 irq 14 [ 0.719407] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40c8 irq 15 [ 0.719477] ata6: port disabled--ignoring [ 0.719671] Fixed MDIO Bus: probed [ 0.719688] tun: Universal TUN/TAP device driver, 1.6 [ 0.719689] tun: (C) 1999-2004 Max Krasnyansky [ 0.719838] PPP generic driver version 2.4.2 [ 0.719920] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.719949] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.719953] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.719994] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.720042] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.723911] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 0.723924] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe4800000 [ 0.732018] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.732122] hub 1-0:1.0: USB hub found [ 0.732127] hub 1-0:1.0: 4 ports detected [ 0.732198] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.732202] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.732241] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.732266] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.736153] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 0.736167] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe4808000 [ 0.745685] ACPI: Battery Slot [C23B] (battery present) [ 0.748016] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.748109] hub 2-0:1.0: USB hub found [ 0.748113] hub 2-0:1.0: 6 ports detected [ 0.748175] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.748192] uhci_hcd: USB Universal Host Controller Interface driver [ 0.748211] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.748214] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.748256] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.748294] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00004020 [ 0.748397] hub 3-0:1.0: USB hub found [ 0.748401] hub 3-0:1.0: 2 ports detected [ 0.748464] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.748467] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.748508] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.748542] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00004040 [ 0.748644] hub 4-0:1.0: USB hub found [ 0.748647] hub 4-0:1.0: 2 ports detected [ 0.748711] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.748714] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.748749] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 0.748774] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004060 [ 0.748879] hub 5-0:1.0: USB hub found [ 0.748882] hub 5-0:1.0: 2 ports detected [ 0.748945] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.748948] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.748989] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 0.749027] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00004080 [ 0.749128] hub 6-0:1.0: USB hub found [ 0.749131] hub 6-0:1.0: 2 ports detected [ 0.749190] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.749194] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.749231] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 0.749257] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000040a0 [ 0.749356] hub 7-0:1.0: USB hub found [ 0.749359] hub 7-0:1.0: 2 ports detected [ 0.749458] usbcore: registered new interface driver libusual [ 0.749496] i8042: PNP: PS/2 Controller [PNP0303:C298,PNP0f13:C299] at 0x60,0x64 irq 1,12 [ 0.751049] i8042: Detected active multiplexing controller, rev 1.1 [ 0.751702] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.751707] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.751730] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.751748] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.751768] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.751870] mousedev: PS/2 mouse device common for all mice [ 0.752042] rtc_cmos 00:08: RTC can wake from S4 [ 0.752178] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 0.752209] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.752278] device-mapper: uevent: version 1.0.3 [ 0.752340] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.752370] cpuidle: using governor ladder [ 0.752404] cpuidle: using governor menu [ 0.752406] EFI Variables Facility v0.08 2004-May-17 [ 0.752587] ashmem: initialized [ 0.752615] using rtc device, rtc_cmos, for alarms [ 0.752729] TCP: cubic registered [ 0.752825] NET: Registered protocol family 10 [ 0.753013] NET: Registered protocol family 17 [ 0.753024] Registering the dns_resolver key type [ 0.753183] PM: Hibernation image not present or could not be loaded. [ 0.753195] registered taskstats version 1 [ 0.759516] Magic number: 12:759:478 [ 0.759519] rtc rtc0: hash matches [ 0.759651] rtc_cmos 00:08: setting system clock to 2012-05-09 11:28:23 UTC (1336562903) [ 0.765045] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.765047] EDD information not available. [ 0.773651] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.880435] ata5.00: ATAPI: Optiarc DVD RW AD-7593A, 1.05, max UDMA/33 [ 0.896360] ata5.00: configured for UDMA/33 [ 1.036056] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.037447] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.037452] ata2.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.037575] ata2.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 1.037579] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.038165] ata2.00: ATA-8: FUJITSU MHZ2250BH G2, 8909, max UDMA/100 [ 1.038168] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.039658] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.039662] ata2.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.039782] ata2.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 1.039786] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.040295] ata2.00: configured for UDMA/100 [ 1.040465] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHZ2250B 8909 PQ: 0 ANSI: 5 [ 1.040598] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.040601] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.040661] sd 0:0:0:0: [sda] Write Protect is off [ 1.040664] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.040703] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.042290] scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7593A 1.05 PQ: 0 ANSI: 5 [ 1.044023] usb 1-4: new high-speed USB device number 2 using ehci_hcd [ 1.045820] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.045823] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.045947] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 1.046079] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 1.081733] sda: sda1 sda2 sda3 sda4 [ 1.082302] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.083847] Freeing unused kernel memory: 912k freed [ 1.084164] Write protecting the kernel read-only data: 12288k [ 1.089331] Freeing unused kernel memory: 1480k freed [ 1.093575] Freeing unused kernel memory: 1144k freed [ 1.111695] udevd[105]: starting version 175 [ 1.162845] [drm] Initialized drm 1.1.0 20060810 [ 1.176641] hub 1-4:1.0: USB hub found [ 1.176720] hub 1-4:1.0: 4 ports detected [ 1.189320] wmi: Mapper loaded [ 1.196303] i915 0000:00:02.0: setting latency timer to 64 [ 1.254068] tg3.c:v3.123 (March 21, 2012) [ 1.258374] i915 0000:00:02.0: irq 45 for MSI/MSI-X [ 1.258387] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 1.258389] [drm] Driver supports precise vblank timestamp query. [ 1.304097] firewire_ohci 0000:02:04.1: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11 [ 1.312056] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.336015] tg3 0000:18:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. [ 1.396011] tg3 0000:18:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. [ 1.400046] usb 2-3: new high-speed USB device number 3 using ehci_hcd [ 1.456013] tg3 0000:18:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. [ 1.456858] tg3 0000:18:00.0: eth0: Tigon3 [partno(none) rev b002] (PCI Express) MAC address 00:1f:29:92:1c:78 [ 1.456863] tg3 0000:18:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 1.456867] tg3 0000:18:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.456870] tg3 0000:18:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 1.535916] Initializing USB Mass Storage driver... [ 1.536029] scsi5 : usb-storage 2-3:1.0 [ 1.536102] usbcore: registered new interface driver usb-storage [ 1.536104] USB Mass Storage support registered. [ 1.536292] usbcore: registered new interface driver uas [ 1.608170] [drm] initialized overlay support [ 1.772045] usb 5-2: new full-speed USB device number 2 using uhci_hcd [ 1.782072] fbcon: inteldrmfb (fb0) is primary device [ 1.782134] Console: switching to colour frame buffer device 210x65 [ 1.782176] fb0: inteldrmfb frame buffer device [ 1.782177] drm: registered panic notifier [ 1.783098] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000004) is beyond end of object (20120320/exoparg2-418) [ 1.783107] ACPI Error: Method parse/execution failed [\_SB_.C003.C098._DOD] (Node ffff880139a38938), AE_AML_PACKAGE_LIMIT (20120320/psparse-536) [ 1.783116] ACPI Exception: AE_AML_PACKAGE_LIMIT, Evaluating _DOD (20120320/video-1155) [ 1.783122] video: probe of LNXVIDEO:00 failed with error 12299 [ 1.783181] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.804165] firewire_core 0000:02:04.1: created device fw0: GUID 00023f99290d2b10, S400 [ 2.008118] usb 1-4.1: new low-speed USB device number 3 using ehci_hcd [ 2.109453] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.1/1-4.1:1.0/input/input4 [ 2.109606] generic-usb 0003:413C:3012.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1a.7-4.1/input0 [ 2.109727] usbcore: registered new interface driver usbhid [ 2.109729] usbhid: USB HID core driver [ 2.176119] usb 1-4.2: new full-speed USB device number 4 using ehci_hcd [ 2.279999] input: Dell Dell Smart Card Reader Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.2/1-4.2:1.0/input/input5 [ 2.280088] generic-usb 0003:413C:2101.0002: input,hidraw1: USB HID v1.11 Keyboard [Dell Dell Smart Card Reader Keyboard] on usb-0000:00:1a.7-4.2/input0 [ 2.742398] scsi 5:0:0:0: Direct-Access Intenso Rainbow Line PQ: 0 ANSI: 4 [ 2.743294] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 2.744624] sd 5:0:0:0: [sdb] 71776119061217281 512-byte logical blocks: (18.3 EB/15.8 EiB) [ 2.745245] sd 5:0:0:0: [sdb] Write Protect is off [ 2.745247] sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 2.745872] sd 5:0:0:0: [sdb] No Caching mode page present [ 2.745874] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 2.748749] sd 5:0:0:0: [sdb] No Caching mode page present [ 2.748751] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 2.754131] sdb: unknown partition table [ 2.756749] sd 5:0:0:0: [sdb] No Caching mode page present [ 2.756752] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 2.756754] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 37.056016] EXT4-fs (dm-0): INFO: recovery required on readonly filesystem [ 37.056019] EXT4-fs (dm-0): write access will be enabled during recovery [ 39.664861] EXT4-fs (dm-0): recovery complete [ 39.675993] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 56.479639] init: Failed to spawn console-setup main process: unable to execute: No such file or directory [ 56.481677] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 56.494585] udevd[435]: starting version 175 [ 56.502772] lp: driver loaded but no devices found [ 56.651691] hp_accel: hardware type NC6710x found [ 56.673832] cfg80211: Calling CRDA to update world regulatory domain [ 56.684122] tpm_tis 00:04: 1.2 TPM (device-id 0xB, rev-id 16) [ 56.695254] lis3lv02d: 12 bits sensor found [ 56.753796] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s [ 56.753799] iwl3945: Copyright(c) 2003-2011 Intel Corporation [ 56.812103] tpm_tis 00:04: Adjusting TPM timeout parameters. [ 56.828128] iwl3945 0000:10:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels [ 56.828132] iwl3945 0000:10:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 56.828281] iwl3945 0000:10:00.0: irq 46 for MSI/MSI-X [ 56.852585] Registered led device: phy0-led [ 56.852643] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 56.890379] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs' [ 56.890965] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 56.905371] WARNING! power/level is deprecated; use power/control instead [ 56.956353] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6 [ 56.959632] Registered led device: hp::hddprotect [ 56.959682] hp_accel: driver loaded [ 56.966685] yenta_cardbus 0000:02:04.0: CardBus bridge found [103c:30c0] [ 57.017328] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c [ 57.092845] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0cb8, PCI irq 16 [ 57.092849] yenta_cardbus 0000:02:04.0: Socket status: 30000006 [ 57.092853] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06 [ 57.092862] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [io 0x7000-0x7fff] [ 57.092865] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0xe4200000-0xe45fffff] [ 57.092868] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4200000-0xe45fffff: excluding 0xe4200000-0xe423ffff [ 57.092880] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0xc0000000-0xc3ffffff pref] [ 57.092883] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0000000-0xc3ffffff: excluding 0xc0000000-0xc3ffffff [ 57.187242] type=1400 audit(1336555759.920:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=746 comm="apparmor_parser" [ 57.187308] type=1400 audit(1336555759.920:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=746 comm="apparmor_parser" [ 57.187361] type=1400 audit(1336555759.920:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=746 comm="apparmor_parser" [ 57.205465] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0 [ 57.205474] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0 [ 57.205556] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 57.389195] ppdev: user-space parallel port driver [ 57.417148] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 57.417152] cfg80211: World regulatory domain updated: [ 57.417154] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 57.417156] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 57.417158] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 57.417161] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 57.417163] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 57.417165] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 57.480549] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c [ 57.482417] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 57.488429] input: HP WMI hotkeys as /devices/virtual/input/input7 [ 57.530462] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0 [ 57.530468] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0 [ 57.568054] tpm_tis 00:04: A TPM error (7) occurred attempting to read a pcr value [ 57.568058] tpm_tis 00:04: TPM is disabled/deactivated (0x7) [ 57.568117] parport_pc 00:03: reported by Plug and Play ACPI [ 57.568187] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 57.570710] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8 [ 57.606574] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff [ 57.606600] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff [ 57.606620] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff [ 57.617975] type=1400 audit(1336555760.352:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1072 comm="apparmor_parser" [ 57.618040] type=1400 audit(1336555760.352:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1072 comm="apparmor_parser" [ 57.618090] type=1400 audit(1336555760.352:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1072 comm="apparmor_parser" [ 57.664159] lp0: using parport0 (interrupt-driven). [ 76.466878] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 77.832121] init: failsafe main process (1615) killed by TERM signal [ 78.303497] Bluetooth: Core ver 2.16 [ 78.303518] NET: Registered protocol family 31 [ 78.303519] Bluetooth: HCI device and connection manager initialized [ 78.303716] Bluetooth: HCI socket layer initialized [ 78.303718] Bluetooth: L2CAP socket layer initialized [ 78.303722] Bluetooth: SCO socket layer initialized [ 78.321728] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 78.321732] Bluetooth: BNEP filters: protocol multicast [ 78.348619] Bluetooth: RFCOMM TTY layer initialized [ 78.348625] Bluetooth: RFCOMM socket layer initialized [ 78.348627] Bluetooth: RFCOMM ver 1.11 [ 78.654544] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 78.657801] tg3 0000:18:00.0: irq 48 for MSI/MSI-X [ 78.700543] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 78.701235] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 78.785246] type=1400 audit(1336555781.520:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1776 comm="apparmor_parser" [ 78.896407] Adding 4452348k swap on /dev/mapper/sda4_crypt. Priority:-1 extents:1 across:4452348k [ 78.932255] type=1400 audit(1336555781.668:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1760 comm="apparmor_parser" [ 78.932439] type=1400 audit(1336555781.668:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1760 comm="apparmor_parser" [ 79.078122] type=1400 audit(1336555781.812:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1777 comm="apparmor_parser" [ 79.078235] type=1400 audit(1336555781.812:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1777 comm="apparmor_parser" [ 79.078306] type=1400 audit(1336555781.812:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1777 comm="apparmor_parser" [ 79.812690] type=1400 audit(1336555782.548:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1822 comm="apparmor_parser" [ 79.812942] type=1400 audit(1336555782.548:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1822 comm="apparmor_parser" [ 80.321191] tg3 0000:18:00.0: eth0: Link is up at 100 Mbps, full duplex [ 80.321195] tg3 0000:18:00.0: eth0: Flow control is on for TX and on for RX [ 80.321674] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 80.399673] type=1400 audit(1336555783.132:16): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1824 comm="apparmor_parser" [ 80.399884] type=1400 audit(1336555783.132:17): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1824 comm="apparmor_parser" [ 85.693757] audit_printk_skb: 9 callbacks suppressed [ 85.693760] type=1400 audit(1336555788.428:21): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1796 comm="apparmor_parser" [ 85.694416] type=1400 audit(1336555788.428:22): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=1796 comm="apparmor_parser" [ 85.694601] type=1400 audit(1336555788.428:23): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=1796 comm="apparmor_parser" [ 85.695161] type=1400 audit(1336555788.428:24): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1796 comm="apparmor_parser" [ 85.695613] type=1400 audit(1336555788.428:25): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=1796 comm="apparmor_parser" [ 85.695791] type=1400 audit(1336555788.428:26): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=1796 comm="apparmor_parser" [ 85.696205] type=1400 audit(1336555788.432:27): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1796 comm="apparmor_parser" [ 85.696506] type=1400 audit(1336555788.432:28): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=1796 comm="apparmor_parser" [ 85.882571] init: lightdm main process (2022) killed by TERM signal [ 87.589630] tg3 0000:18:00.0: eth0: Link is down [ 87.948366] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 87.990534] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 88.032965] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 88.074510] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 88.241438] init: plymouth-stop pre-start process (2727) terminated with status 1 [ 89.280674] tg3 0000:18:00.0: eth0: Link is up at 100 Mbps, full duplex [ 89.280683] tg3 0000:18:00.0: eth0: Flow control is on for TX and on for RX [ 91.200072] eth0: no IPv6 routers present [ 162.460118] usb 2-1: new high-speed USB device number 4 using ehci_hcd [ 162.668383] scsi6 : usb-storage 2-1:1.0 [ 162.668499] usbcore: registered new interface driver ums-cypress [ 163.671094] scsi 6:0:0:0: Direct-Access HTS54108 0G9AT00 0000 PQ: 0 ANSI: 0 [ 163.673171] sd 6:0:0:0: [sdc] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 163.674467] sd 6:0:0:0: [sdc] Write Protect is off [ 163.674477] sd 6:0:0:0: [sdc] Mode Sense: 27 00 00 00 [ 163.675514] sd 6:0:0:0: [sdc] No Caching mode page present [ 163.675523] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 163.677167] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 163.679278] sd 6:0:0:0: [sdc] No Caching mode page present [ 163.679287] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 163.700354] sdc: sdc1 [ 163.710158] sd 6:0:0:0: [sdc] No Caching mode page present [ 163.710161] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 163.710163] sd 6:0:0:0: [sdc] Attached SCSI disk [ 236.611366] usb 2-3: USB disconnect, device number 3 [ 238.128140] usb 2-3: new high-speed USB device number 5 using ehci_hcd [ 238.264075] scsi7 : usb-storage 2-3:1.0 [ 239.471000] scsi 7:0:0:0: Direct-Access Intenso Rainbow Line PQ: 0 ANSI: 4 [ 239.472466] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 239.475411] sd 7:0:0:0: [sdb] 71776119061217281 512-byte logical blocks: (18.3 EB/15.8 EiB) [ 239.476250] sd 7:0:0:0: [sdb] Write Protect is off [ 239.476259] sd 7:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 239.476930] sd 7:0:0:0: [sdb] No Caching mode page present [ 239.476938] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 239.480576] sd 7:0:0:0: [sdb] No Caching mode page present [ 239.480585] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 239.486098] sdb: unknown partition table [ 239.488564] sd 7:0:0:0: [sdb] No Caching mode page present [ 239.488572] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 239.488579] sd 7:0:0:0: [sdb] Attached SCSI removable disk