[   29.617985] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   29.618347] DVB: registering new adapter (Pinnacle PCTV 340e HD Pro USB Stick)
[   30.469282] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
[   30.503076] xc4000 2-0061: creating new instance
[   30.508398] xc4000: Successfully identified at address 0x61
[   30.508402] xc4000: Firmware has not been loaded previously
[   30.512409] Error: firmware dvb-fe-xc4000-1.4.fw not found.
[   30.512420] xc4000 2-0061: destroying instance
[   30.564101] Registered IR keymap rc-dib0700-rc5
[   30.564304] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:10.4/usb1/1-8/rc/rc0/input5
[   30.566398] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:10.4/usb1/1-8/rc/rc0
[   30.566529] dvb-usb: schedule remote query interval to 50 msecs.
[   30.566535] dvb-usb: Pinnacle PCTV 340e HD Pro USB Stick successfully initialized and connected.
[   30.566983] usbcore: registered new interface driver dvb_usb_dib0700
[   30.622803] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[   30.622808] vesafb: scrolling: redraw
[   30.622813] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[   30.623277] vesafb: framebuffer at 0xf4000000, mapped to 0xffffc90000d00000, using 3072k, total 3072k
[   30.628360] Console: switching to colour frame buffer device 128x48
[   30.628397] fb0: VESA VGA frame buffer device
[   31.621740] [drm] Initialized drm 1.1.0 20060810
[   31.623981] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   31.626517] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   31.626525] [drm] No driver support for vblank timestamp query.
[   31.626532] [drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0
[   31.631656] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[   31.631680] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[   31.631748] pci 0000:01:00.0: putting AGP V3 device into 8x mode
[   33.606988] init: plymouth-stop pre-start process (1722) terminated with status 1
[   38.400046] eth0: no IPv6 routers present
[  364.128024] usb 1-1: new high-speed USB device number 5 using ehci_hcd
[  364.303746] Linux video capture interface: v2.00
[  364.311364] em28xx: New device WinTV HVR-900 @ 480 Mbps (2040:6502, interface 0, class 0)
[  364.311370] em28xx: Audio Vendor Class interface 0 found
[  364.311546] em28xx #0: chip ID is em2882/em2883
[  364.482560] em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 82 1e 6a 18
[  364.482574] em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00
[  364.482585] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00
[  364.482596] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 00 00 00 00
[  364.482606] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  364.482616] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  364.482627] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00
[  364.482637] em28xx #0: i2c eeprom 70: 32 00 37 00 32 00 34 00 36 00 30 00 37 00 30 00
[  364.482647] em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00
[  364.482658] em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 30 00 00 00
[  364.482668] em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89
[  364.482678] em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 f6 e5
[  364.482689] em28xx #0: i2c eeprom c0: 0a f0 74 02 01 00 01 79 65 00 00 00 00 00 00 00
[  364.482699] em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89
[  364.482709] em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 f6 e5
[  364.482720] em28xx #0: i2c eeprom f0: 0a f0 74 02 01 00 01 79 65 00 00 00 00 00 00 00
[  364.482732] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xc66735dd
[  364.482734] em28xx #0: EEPROM info:
[  364.482736] em28xx #0:	AC97 audio (5 sample rates)
[  364.482738] em28xx #0:	500mA max power
[  364.482741] em28xx #0:	Table at 0x24, strings=0x1e82, 0x186a, 0x0000
[  364.483555] em28xx #0: Identified as Hauppauge WinTV HVR 900 (R2) (card=18)
[  364.487335] tveeprom 7-0050: Hauppauge model 65018, rev B2C0, serial# 714230
[  364.487341] tveeprom 7-0050: tuner model is Xceive XC3028 (idx 120, type 71)
[  364.487346] tveeprom 7-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4)
[  364.487350] tveeprom 7-0050: audio processor is None (idx 0)
[  364.487353] tveeprom 7-0050: has radio
[  364.495215] tvp5150 7-005c: chip found @ 0xb8 (em28xx #0)
[  364.556445] tvp5150 7-005c: tvp5150am1 detected.
[  364.563250] i2c-core: driver [tuner] using legacy suspend method
[  364.563255] i2c-core: driver [tuner] using legacy resume method
[  364.569290] tuner 7-0061: Tuner -1 found with type(s) Radio TV.
[  364.575501] xc2028 7-0061: creating new instance
[  364.575507] xc2028 7-0061: type set to XCeive xc2028/xc3028 tuner
[  364.579426] xc2028 7-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[  364.628022] xc2028 7-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[  365.635457] xc2028 7-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[  365.652957] xc2028 7-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[  365.800019] Registered IR keymap rc-hauppauge
[  365.803646] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:10.4/usb1/1-1/rc/rc1/input6
[  365.803956] rc1: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:10.4/usb1/1-1/rc/rc1
[  365.804726] em28xx #0: Config register raw data: 0xd0
[  365.805479] em28xx #0: AC97 vendor ID = 0xffffffff
[  365.805849] em28xx #0: AC97 features = 0x6a90
[  365.805854] em28xx #0: Empia 202 AC97 audio processor detected
[  365.992869] em28xx #0: v4l2 driver version 0.1.3
[  366.040021] xc2028 7-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[  367.051377] MTS (4), id 00000000000000ff:
[  367.051388] xc2028 7-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[  367.276414] em28xx #0: V4L2 video device registered as video0
[  367.276420] em28xx #0: V4L2 VBI device registered as vbi0
[  367.278528] usbcore: registered new interface driver em28xx
[  367.278535] em28xx driver loaded
[  367.290515] em28xx-audio.c: probing for em28xx Audio Vendor Class
[  367.290523] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[  367.290525] em28xx-audio.c: Copyright (C) 2007-2011 Mauro Carvalho Chehab
[  367.294415] Em28xx: Initialized (Em28xx Audio Extension) extension
[  367.558195] xc2028 7-0061: attaching existing instance
[  367.558201] xc2028 7-0061: type set to XCeive xc2028/xc3028 tuner
[  367.558204] em28xx #0: em28xx #0/2: xc3028 attached
[  367.558209] DVB: registering new adapter (em28xx #0)
[  367.558214] DVB: registering adapter 1 frontend 0 (Micronas DRXD DVB-T)...
[  367.560810] em28xx #0: Successfully loaded em28xx-dvb
[  367.560820] Em28xx: Initialized (Em28xx dvb Extension) extension
[  368.029188] em28xx #0: submit of audio urb failed
[  375.280029] xc2028 7-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[  376.336641] MTS (4), id 00000000000000ff:
[  376.336652] xc2028 7-0061: Loading firmware for type=MTS (4), id 0000000100000007.