[ 0.000000] Using PowerMac machine description [ 0.000000] Cannot reserve gpages without hugetlb enabled [ 0.000000] Total memory = 1024MB; using 2048kB for hash table (at cfe00000) [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-5-powerpc (buildd@ross) (gcc version 4.6.2 (Ubuntu/Linaro 4.6.2-7ubuntu1) ) #11-Ubuntu Thu Dec 15 22:27:40 UTC 2011 (Ubuntu 3.2.0-5.11-powerpc 3.2.0-rc5) [ 0.000000] Found initrd at 0xc1800000:0xc25ea000 [ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2 [ 0.000000] Mapped at 0xff7c0000 [ 0.000000] Found a Intrepid mac-io controller, rev: 0, mapped at 0xff740000 [ 0.000000] Processor NAP mode on idle enabled. [ 0.000000] PowerMac motherboard: Mac mini (Late 2005) [ 0.000000] bootconsole [udbg0] enabled [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f0000000 ranges: [ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 [ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges: [ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000 [ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f4000000 ranges: [ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000 [ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000 [ 0.000000] via-pmu: Server Mode is disabled [ 0.000000] PMU driver v2 initialized for Core99, firmware: 55 [ 0.000000] nvram: Checking bank 0... [ 0.000000] nvram: gen0=216, gen1=217 [ 0.000000] nvram: Active bank is: 1 [ 0.000000] nvram: OF partition at 0x410 [ 0.000000] nvram: XP partition at 0x1020 [ 0.000000] nvram: NR partition at 0x1120 [ 0.000000] Top of RAM: 0x40000000, Total RAM: 0x40000000 [ 0.000000] Memory hole size: 0MB [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00030000 [ 0.000000] Normal empty [ 0.000000] HighMem 0x00030000 -> 0x00040000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00040000 [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] free_area_init_node: node 0, pgdat c086dc4c, node_mem_map c0a4e000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 195072 pages, LIFO batch:31 [ 0.000000] HighMem zone: 512 pages used for memmap [ 0.000000] HighMem zone: 65024 pages, LIFO batch:15 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096 [ 0.000000] Kernel command line: root=/dev/sda5 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] allocated 4194304 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] High memory: 262144k [ 0.000000] Memory: 1008252k/1048576k available (8360k kernel code, 40324k reserved, 340k data, 1798k bss, 376k init) [ 0.000000] Kernel virtual memory layout: [ 0.000000] * 0xfffcf000..0xfffff000 : fixmap [ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs [ 0.000000] * 0xfdf32000..0xff800000 : early ioremap [ 0.000000] * 0xf1000000..0xfdf32000 : vmalloc & ioremap [ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:512 nr_irqs:512 16 [ 0.000000] mpic: Resetting [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 1 CPUs [ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f [ 0.000000] mpic: Initializing for 64 sources [ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off [ 0.000000] time_init: decrementer frequency = 41.600661 MHz [ 0.000000] time_init: processor frequency = 1333.333328 MHz [ 0.000000] clocksource: timebase mult[6026fe5] shift[22] registered [ 0.000000] clockevent: decrementer mult[aa65746] shift[32] cpu[0] [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled, bootconsole disabled [ 0.000231] pid_max: default: 32768 minimum: 301 [ 0.000283] Security Framework initialized [ 0.000353] AppArmor: AppArmor initialized [ 0.000357] Yama: becoming mindful. [ 0.000477] Mount-cache hash table entries: 512 [ 0.000820] device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1" [ 0.002693] Initializing cgroup subsys cpuacct [ 0.002705] Initializing cgroup subsys memory [ 0.002722] Initializing cgroup subsys devices [ 0.002728] Initializing cgroup subsys freezer [ 0.002734] Initializing cgroup subsys net_cls [ 0.002739] Initializing cgroup subsys blkio [ 0.002757] Initializing cgroup subsys perf_event [ 0.002817] ftrace: allocating 21441 entries in 64 pages [ 0.012830] MPC7450 family performance monitor hardware support registered [ 0.013571] devtmpfs: initialized [ 0.013721] EVM: security.selinux [ 0.013725] EVM: security.SMACK64 [ 0.013728] EVM: security.capability [ 0.015624] print_constraints: dummy: [ 0.015737] NET: Registered protocol family 16 [ 0.016248] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000 [ 0.016257] channel 0 bus [ 0.016262] channel 1 bus [ 0.016297] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000 [ 0.016304] channel 0 bus [ 0.016316] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c [ 0.016321] channel 1 bus [ 0.016326] channel 2 bus [ 0.016519] PCI: Probing PCI hardware [ 0.016628] pci 0000:00:0b.0: [106b:0034] type 0 class 0x000600 [ 0.016740] pci 0000:00:10.0: [1002:5962] type 0 class 0x000300 [ 0.016761] pci 0000:00:10.0: reg 10: [mem 0x98000000-0x9fffffff pref] [ 0.016770] pci 0000:00:10.0: reg 14: [io 0x0400-0x04ff] [ 0.016780] pci 0000:00:10.0: reg 18: [mem 0x90000000-0x9000ffff] [ 0.016802] pci 0000:00:10.0: reg 30: [mem 0x90020000-0x9003ffff pref] [ 0.016825] pci 0000:00:10.0: supports D1 D2 [ 0.017058] pci 0001:10:0b.0: [106b:0035] type 0 class 0x000600 [ 0.017120] pci 0001:10:17.0: [106b:003e] type 0 class 0x00ff00 [ 0.017134] pci 0001:10:17.0: reg 10: [mem 0x80000000-0x8007ffff] [ 0.017190] pci 0001:10:18.0: [106b:003f] type 0 class 0x000c03 [ 0.017204] pci 0001:10:18.0: reg 10: [mem 0x00000000-0x00000fff] [ 0.017260] pci 0001:10:19.0: [106b:003f] type 0 class 0x000c03 [ 0.017274] pci 0001:10:19.0: reg 10: [mem 0x00000000-0x00000fff] [ 0.017336] pci 0001:10:1a.0: [106b:003f] type 0 class 0x000c03 [ 0.017351] pci 0001:10:1a.0: reg 10: [mem 0x80083000-0x80083fff] [ 0.017409] pci 0001:10:1b.0: [1033:0035] type 0 class 0x000c03 [ 0.017426] pci 0001:10:1b.0: reg 10: [mem 0x80082000-0x80082fff] [ 0.017477] pci 0001:10:1b.0: supports D1 D2 [ 0.017482] pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.017491] pci 0001:10:1b.0: PME# disabled [ 0.017513] pci 0001:10:1b.1: [1033:0035] type 0 class 0x000c03 [ 0.017530] pci 0001:10:1b.1: reg 10: [mem 0x80081000-0x80081fff] [ 0.017581] pci 0001:10:1b.1: supports D1 D2 [ 0.017586] pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.017592] pci 0001:10:1b.1: PME# disabled [ 0.017615] pci 0001:10:1b.2: [1033:00e0] type 0 class 0x000c03 [ 0.017631] pci 0001:10:1b.2: reg 10: [mem 0x80080000-0x800800ff] [ 0.017683] pci 0001:10:1b.2: supports D1 D2 [ 0.017688] pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.017694] pci 0001:10:1b.2: PME# disabled [ 0.018286] pci 0002:20:0b.0: [106b:0036] type 0 class 0x000600 [ 0.018326] pci 0002:20:0d.0: [106b:003b] type 0 class 0x00ff00 [ 0.018338] pci 0002:20:0d.0: reg 10: [mem 0xf5004000-0xf5007fff] [ 0.018383] pci 0002:20:0e.0: [106b:0031] type 0 class 0x000c00 [ 0.018397] pci 0002:20:0e.0: reg 10: [mem 0xf5000000-0xf5000fff] [ 0.018436] pci 0002:20:0e.0: supports D1 D2 [ 0.018440] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.018447] pci 0002:20:0e.0: PME# disabled [ 0.018464] pci 0002:20:0f.0: [106b:0032] type 0 class 0x000200 [ 0.018476] pci 0002:20:0f.0: reg 10: [mem 0xf5200000-0xf53fffff] [ 0.018505] pci 0002:20:0f.0: reg 30: [mem 0xf5100000-0xf51fffff pref] [ 0.018864] PCI 0000:00 Cannot reserve Legacy IO [io 0x802000-0x802fff] [ 0.018871] PCI: max bus depth: 0 pci_try_num: 1 [ 0.018885] pci_bus 0000:00: resource 0 [io 0x802000-0x1001fff] [ 0.018891] pci_bus 0000:00: resource 1 [mem 0xf1000000-0xf1ffffff] [ 0.018896] pci_bus 0000:00: resource 2 [mem 0x90000000-0x9fffffff] [ 0.018902] pci_bus 0001:10: resource 0 [io 0x0000-0x7fffff] [ 0.018907] pci_bus 0001:10: resource 1 [mem 0xf3000000-0xf3ffffff] [ 0.018913] pci_bus 0001:10: resource 2 [mem 0x80000000-0x8fffffff] [ 0.018919] pci_bus 0002:20: resource 0 [io 0xff7fe000-0xffffdfff] [ 0.018924] pci_bus 0002:20: resource 1 [mem 0xf5000000-0xf5ffffff] [ 0.021109] bio: create slab at 0 [ 0.021603] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none [ 0.021622] vgaarb: loaded [ 0.021625] vgaarb: bridge control possible 0000:00:10.0 [ 0.021918] i2c-core: driver [aat2870] using legacy suspend method [ 0.021923] i2c-core: driver [aat2870] using legacy resume method [ 0.022136] SCSI subsystem initialized [ 0.022244] libata version 3.00 loaded. [ 0.022368] usbcore: registered new interface driver usbfs [ 0.022395] usbcore: registered new interface driver hub [ 0.022458] usbcore: registered new device driver usb [ 0.022766] NetLabel: Initializing [ 0.022771] NetLabel: domain hash size = 128 [ 0.022774] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.022802] NetLabel: unlabeled traffic allowed by default [ 0.022926] Switching to clocksource timebase [ 0.029402] AppArmor: AppArmor Filesystem Enabled [ 0.033560] NET: Registered protocol family 2 [ 0.033690] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.034250] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.035679] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 0.036030] TCP: Hash tables configured (established 131072 bind 65536) [ 0.036036] TCP reno registered [ 0.036045] UDP hash table entries: 512 (order: 1, 8192 bytes) [ 0.036063] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) [ 0.036276] NET: Registered protocol family 1 [ 0.036358] PCI: CLS mismatch (32 != 1020), using 32 bytes [ 0.036744] Thermal assist unit not available [ 0.037179] audit: initializing netlink socket (disabled) [ 0.037206] type=2000 audit(1325952986.028:1): initialized [ 0.095095] Trying to unpack rootfs image as initramfs... [ 0.179500] highmem bounce pool size: 64 pages [ 0.188369] VFS: Disk quotas dquot_6.5.2 [ 0.188497] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.195249] fuse init (API version 7.17) [ 0.195545] msgmni has been set to 1459 [ 0.203539] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.207027] io scheduler noop registered [ 0.207038] io scheduler deadline registered [ 0.207085] io scheduler cfq registered (default) [ 0.207330] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.207357] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.207660] Using unsupported 1024x768 ATY,RockHopper2_A at 9c008000, depth=8, pitch=1024 [ 0.223127] Console: switching to colour frame buffer device 128x48 [ 0.238236] fb0: Open Firmware frame buffer device on /pci@f0000000/ATY,RockHopper2Parent@10/ATY,RockHopper2_A@0 [ 0.267919] pmac_zilog: 0.6 (Benjamin Herrenschmidt ) [ 0.267942] ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port [ 0.268020] ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port [ 0.268209] Generic non-volatile memory driver v1.1 [ 0.268268] Linux agpgart interface v0.103 [ 0.275589] brd: module loaded [ 0.277087] loop: module loaded [ 0.277281] MacIO PCI driver attached to Intrepid chipset [ 0.278863] pata-pci-macio 0002:20:0d.0: enabling device (0000 -> 0002) [ 0.283257] adb: starting probe task... [ 0.283274] adb: finished probe task... [ 0.295034] pata-pci-macio 0002:20:0d.0: Activating pata-macio chipset UniNorth ATA-6, Apple bus ID 3 [ 0.299109] scsi0 : pata_macio [ 0.299322] ata1: PATA max UDMA/100 irq 39 [ 0.475487] ata1.00: ATA-6: ST9402115A, 3.01, max UDMA/100 [ 0.475498] ata1.00: 78140160 sectors, multi 16: LBA48 [ 0.475514] ata1.01: ATAPI: MATSHITACD-RW CW-8124, DACD, max UDMA/33 [ 0.483402] ata1.00: configured for UDMA/100 [ 0.499353] ata1.01: configured for UDMA/33 [ 0.529624] scsi 0:0:0:0: Direct-Access ATA ST9402115A 3.01 PQ: 0 ANSI: 5 [ 0.550309] scsi 0:0:1:0: CD-ROM MATSHITA CD-RW CW-8124 DACD PQ: 0 ANSI: 5 [ 0.666304] Freeing initrd memory: 14248k freed [ 1.318965] pata-macio 0.00020000:ata-3: Activating pata-macio chipset KeyLargo ATA-3, Apple bus ID 0 [ 1.319450] scsi1 : pata_macio [ 1.319561] ata2: PATA max MWDMA2 irq 24 [ 1.319742] Fixed MDIO Bus: probed [ 1.319747] tun: Universal TUN/TAP device driver, 1.6 [ 1.319751] tun: (C) 1999-2004 Max Krasnyansky [ 1.319903] arcnet loaded. [ 1.320037] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.320098] ehci_hcd 0001:10:1b.2: enabling device (0004 -> 0006) [ 1.320127] ehci_hcd 0001:10:1b.2: EHCI Host Controller [ 1.320231] ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 1 [ 1.342985] ehci_hcd 0001:10:1b.2: irq 63, io mem 0x80080000 [ 1.354946] ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00 [ 1.355251] hub 1-0:1.0: USB hub found [ 1.355263] hub 1-0:1.0: 5 ports detected [ 1.355507] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.355557] Apple USB OHCI 0001:10:18.0 disabled by firmware [ 1.355577] Apple USB OHCI 0001:10:19.0 disabled by firmware [ 1.355598] ohci_hcd 0001:10:1a.0: enabling device (0000 -> 0002) [ 1.355620] ohci_hcd 0001:10:1a.0: OHCI Host Controller [ 1.355736] ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 2 [ 1.355775] ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80083000 [ 1.430910] hub 2-0:1.0: USB hub found [ 1.430922] hub 2-0:1.0: 2 ports detected [ 1.431044] ohci_hcd 0001:10:1b.0: enabling device (0000 -> 0002) [ 1.431061] ohci_hcd 0001:10:1b.0: OHCI Host Controller [ 1.431145] ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 3 [ 1.431168] ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000 [ 1.506891] hub 3-0:1.0: USB hub found [ 1.506902] hub 3-0:1.0: 3 ports detected [ 1.507024] ohci_hcd 0001:10:1b.1: enabling device (0000 -> 0002) [ 1.507041] ohci_hcd 0001:10:1b.1: OHCI Host Controller [ 1.507150] ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 4 [ 1.507174] ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000 [ 1.582883] hub 4-0:1.0: USB hub found [ 1.582893] hub 4-0:1.0: 2 ports detected [ 1.583018] uhci_hcd: USB Universal Host Controller Interface driver [ 1.583436] mousedev: PS/2 mouse device common for all mice [ 1.583620] PowerMac i2c bus pmu 2 registered [ 1.583670] PowerMac i2c bus pmu 1 registered [ 1.583737] PowerMac i2c bus mac-io 0 registered [ 1.583785] PowerMac i2c bus uni-n 1 registered [ 1.583842] PowerMac i2c bus uni-n 0 registered [ 1.584048] device-mapper: uevent: version 1.0.3 [ 1.584221] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 1.584650] TCP cubic registered [ 1.584986] NET: Registered protocol family 10 [ 1.585874] NET: Registered protocol family 17 [ 1.585919] Registering the dns_resolver key type [ 1.586203] registered taskstats version 1 [ 1.606131] input: PMU as /devices/virtual/input/input0 [ 1.606266] /build/buildd/linux-3.2.0/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.607042] Freeing unused kernel memory: 376k freed [ 1.668238] udevd[80]: starting version 173 [ 1.723039] usb 1-2: new high-speed USB device number 3 using ehci_hcd [ 1.857482] hub 1-2:1.0: USB hub found [ 1.857882] hub 1-2:1.0: 4 ports detected [ 2.033549] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 2.033675] sd 0:0:0:0: [sda] Write Protect is off [ 2.033682] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.033731] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.035016] usb 3-1: new low-speed USB device number 2 using ohci_hcd [ 2.037440] sungem.c:v1.0 David S. Miller [ 2.038447] gem 0002:20:0f.0: eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:11:24:d0:e9:f0 [ 2.089965] sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 [ 2.099913] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.099945] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 2.099954] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.101737] firewire_ohci 0002:20:0e.0: enabling device (0000 -> 0002) [ 2.103477] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 2.136620] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.136735] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 2.155069] firewire_ohci: Added fw-ohci device 0002:20:0e.0, OHCI v1.10, 8 IR + 8 IT contexts, quirks 0x0 [ 2.286004] input: Logitech USB Receiver as /devices/pci0001:10/0001:10:1b.0/usb3/3-1/3-1:1.0/input/input1 [ 2.286419] generic-usb 0003:046D:C505.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0001:10:1b.0-1/input0 [ 2.300033] input: Logitech USB Receiver as /devices/pci0001:10/0001:10:1b.0/usb3/3-1/3-1:1.1/input/input2 [ 2.301997] generic-usb 0003:046D:C505.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0001:10:1b.0-1/input1 [ 2.302072] usbcore: registered new interface driver usbhid [ 2.302077] usbhid: USB HID core driver [ 2.323379] usb 1-2.1: new full-speed USB device number 4 using ehci_hcd [ 2.491302] usb 1-2.3: new high-speed USB device number 5 using ehci_hcd [ 2.597585] Initializing USB Mass Storage driver... [ 2.597951] scsi2 : usb-storage 1-2.3:1.0 [ 2.598710] usbcore: registered new interface driver usb-storage [ 2.598718] USB Mass Storage support registered. [ 2.655185] firewire_core: created device fw0: GUID 001124fffed0e9f0, S400 [ 2.655401] usb 1-2.4: new full-speed USB device number 6 using ehci_hcd [ 3.601839] scsi 2:0:0:0: CD-ROM HL-DT-ST BD-RE BE06LU10 YE03 PQ: 0 ANSI: 0 [ 3.618995] sr1: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.619360] sr 2:0:0:0: Attached scsi CD-ROM sr1 [ 3.619561] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 7.794985] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 7.794994] ata1.00: BMDMA stat 0x4 [ 7.795002] ata1.00: failed command: READ DMA [ 7.795016] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 7.795019] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 7.795026] ata1.00: status: { DRDY ERR } [ 7.795031] ata1.00: error: { UNC } [ 7.811210] ata1.00: configured for UDMA/100 [ 7.827123] ata1.01: configured for UDMA/33 [ 7.827144] ata1: EH complete [ 11.816201] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 11.816207] ata1.00: BMDMA stat 0x4 [ 11.816212] ata1.00: failed command: READ DMA [ 11.816225] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 11.816228] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 11.816234] ata1.00: status: { DRDY ERR } [ 11.816239] ata1.00: error: { UNC } [ 11.839241] ata1.00: configured for UDMA/100 [ 11.855132] ata1.01: configured for UDMA/33 [ 11.855142] ata1: EH complete [ 15.837457] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 15.837463] ata1.00: BMDMA stat 0x4 [ 15.837468] ata1.00: failed command: READ DMA [ 15.837480] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 15.837484] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 15.837490] ata1.00: status: { DRDY ERR } [ 15.837494] ata1.00: error: { UNC } [ 15.851242] ata1.00: configured for UDMA/100 [ 15.867127] ata1.01: configured for UDMA/33 [ 15.867137] ata1: EH complete [ 19.858726] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 19.858731] ata1.00: BMDMA stat 0x4 [ 19.858736] ata1.00: failed command: READ DMA [ 19.858748] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 19.858752] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 19.858758] ata1.00: status: { DRDY ERR } [ 19.858763] ata1.00: error: { UNC } [ 19.871235] ata1.00: configured for UDMA/100 [ 19.887127] ata1.01: configured for UDMA/33 [ 19.887136] ata1: EH complete [ 23.869029] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 23.869035] ata1.00: BMDMA stat 0x4 [ 23.869040] ata1.00: failed command: READ DMA [ 23.869052] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 23.869055] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 23.869061] ata1.00: status: { DRDY ERR } [ 23.869066] ata1.00: error: { UNC } [ 23.891230] ata1.00: configured for UDMA/100 [ 23.907121] ata1.01: configured for UDMA/33 [ 23.907130] ata1: EH complete [ 27.890312] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 27.890317] ata1.00: BMDMA stat 0x4 [ 27.890322] ata1.00: failed command: READ DMA [ 27.890334] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 27.890338] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 27.890344] ata1.00: status: { DRDY ERR } [ 27.890349] ata1.00: error: { UNC } [ 27.911198] ata1.00: configured for UDMA/100 [ 27.927116] ata1.01: configured for UDMA/33 [ 27.927137] sd 0:0:0:0: [sda] Unhandled sense code [ 27.927142] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 27.927149] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 27.927157] Descriptor sense data with sense descriptors (in hex): [ 27.927161] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 27.927175] 00 04 01 b0 [ 27.927182] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 27.927194] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 04 01 b0 00 00 08 00 [ 27.927209] end_request: I/O error, dev sda, sector 262576 [ 27.927217] Buffer I/O error on device sda4, logical block 46 [ 27.927240] ata1: EH complete [ 31.944795] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 31.944804] ata1.00: BMDMA stat 0x4 [ 31.944811] ata1.00: failed command: READ DMA [ 31.944825] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 31.944828] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 31.944835] ata1.00: status: { DRDY ERR } [ 31.944840] ata1.00: error: { UNC } [ 31.959207] ata1.00: configured for UDMA/100 [ 31.975117] ata1.01: configured for UDMA/33 [ 31.975141] ata1: EH complete [ 35.966038] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 35.966044] ata1.00: BMDMA stat 0x4 [ 35.966049] ata1.00: failed command: READ DMA [ 35.966061] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 35.966064] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 35.966071] ata1.00: status: { DRDY ERR } [ 35.966075] ata1.00: error: { UNC } [ 35.987205] ata1.00: configured for UDMA/100 [ 36.003113] ata1.01: configured for UDMA/33 [ 36.003125] ata1: EH complete [ 39.987326] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 39.987331] ata1.00: BMDMA stat 0x4 [ 39.987336] ata1.00: failed command: READ DMA [ 39.987349] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 39.987352] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 39.987358] ata1.00: status: { DRDY ERR } [ 39.987363] ata1.00: error: { UNC } [ 40.011204] ata1.00: configured for UDMA/100 [ 40.027114] ata1.01: configured for UDMA/33 [ 40.027126] ata1: EH complete [ 44.008620] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 44.008626] ata1.00: BMDMA stat 0x4 [ 44.008631] ata1.00: failed command: READ DMA [ 44.008643] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 44.008647] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 44.008653] ata1.00: status: { DRDY ERR } [ 44.008657] ata1.00: error: { UNC } [ 44.023211] ata1.00: configured for UDMA/100 [ 44.039111] ata1.01: configured for UDMA/33 [ 44.039121] ata1: EH complete [ 48.029948] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 48.029954] ata1.00: BMDMA stat 0x4 [ 48.029959] ata1.00: failed command: READ DMA [ 48.029971] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 48.029974] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 48.029981] ata1.00: status: { DRDY ERR } [ 48.029985] ata1.00: error: { UNC } [ 48.051229] ata1.00: configured for UDMA/100 [ 48.067120] ata1.01: configured for UDMA/33 [ 48.067130] ata1: EH complete [ 52.051221] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 52.051226] ata1.00: BMDMA stat 0x4 [ 52.051231] ata1.00: failed command: READ DMA [ 52.051243] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 52.051246] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 52.051253] ata1.00: status: { DRDY ERR } [ 52.051257] ata1.00: error: { UNC } [ 52.075222] ata1.00: configured for UDMA/100 [ 52.091116] ata1.01: configured for UDMA/33 [ 52.091141] sd 0:0:0:0: [sda] Unhandled sense code [ 52.091146] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 52.091153] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 52.091162] Descriptor sense data with sense descriptors (in hex): [ 52.091166] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 52.091180] 00 04 01 b0 [ 52.091186] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 52.091198] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 04 01 b0 00 00 08 00 [ 52.091213] end_request: I/O error, dev sda, sector 262576 [ 52.091223] Buffer I/O error on device sda4, logical block 46 [ 52.091261] ata1: EH complete [ 56.216168] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 56.216176] ata1.00: BMDMA stat 0x4 [ 56.216183] ata1.00: failed command: READ DMA [ 56.216196] ata1.00: cmd c8/00:10:c0:2a:04/00:00:00:00:00/e0 tag 0 dma 8192 in [ 56.216200] res 51/40:10:c0:2a:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 56.216206] ata1.00: status: { DRDY ERR } [ 56.216211] ata1.00: error: { UNC } [ 56.231203] ata1.00: configured for UDMA/100 [ 56.247100] ata1.01: configured for UDMA/33 [ 56.247116] ata1: EH complete [ 60.237455] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 60.237461] ata1.00: BMDMA stat 0x4 [ 60.237466] ata1.00: failed command: READ DMA [ 60.237478] ata1.00: cmd c8/00:10:c0:2a:04/00:00:00:00:00/e0 tag 0 dma 8192 in [ 60.237482] res 51/40:10:c0:2a:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 60.237488] ata1.00: status: { DRDY ERR } [ 60.237492] ata1.00: error: { UNC } [ 60.259210] ata1.00: configured for UDMA/100 [ 60.275105] ata1.01: configured for UDMA/33 [ 60.275115] ata1: EH complete [ 64.247750] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 64.247758] ata1.00: BMDMA stat 0x4 [ 64.247765] ata1.00: failed command: READ DMA [ 64.247778] ata1.00: cmd c8/00:10:c0:2a:04/00:00:00:00:00/e0 tag 0 dma 8192 in [ 64.247781] res 51/40:10:c0:2a:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 64.247788] ata1.00: status: { DRDY ERR } [ 64.247793] ata1.00: error: { UNC } [ 64.271201] ata1.00: configured for UDMA/100 [ 64.287118] ata1.01: configured for UDMA/33 [ 64.287137] ata1: EH complete [ 68.280124] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 68.280133] ata1.00: BMDMA stat 0x4 [ 68.280140] ata1.00: failed command: READ DMA [ 68.280154] ata1.00: cmd c8/00:10:c0:2a:04/00:00:00:00:00/e0 tag 0 dma 8192 in [ 68.280157] res 51/40:10:c0:2a:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 68.280164] ata1.00: status: { DRDY ERR } [ 68.280169] ata1.00: error: { UNC } [ 68.303200] ata1.00: configured for UDMA/100 [ 68.319116] ata1.01: configured for UDMA/33 [ 68.319140] ata1: EH complete [ 72.301334] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 72.301342] ata1.00: BMDMA stat 0x4 [ 72.301347] ata1.00: failed command: READ DMA [ 72.301360] ata1.00: cmd c8/00:10:c0:2a:04/00:00:00:00:00/e0 tag 0 dma 8192 in [ 72.301363] res 51/40:10:c0:2a:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 72.301370] ata1.00: status: { DRDY ERR } [ 72.301375] ata1.00: error: { UNC } [ 72.323231] ata1.00: configured for UDMA/100 [ 72.339125] ata1.01: configured for UDMA/33 [ 72.339141] ata1: EH complete [ 76.311595] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 76.311603] ata1.00: BMDMA stat 0x4 [ 76.311609] ata1.00: failed command: READ DMA [ 76.311622] ata1.00: cmd c8/00:10:c0:2a:04/00:00:00:00:00/e0 tag 0 dma 8192 in [ 76.311625] res 51/40:10:c0:2a:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 76.311632] ata1.00: status: { DRDY ERR } [ 76.311637] ata1.00: error: { UNC } [ 76.335213] ata1.00: configured for UDMA/100 [ 76.351113] ata1.01: configured for UDMA/33 [ 76.351143] sd 0:0:0:0: [sda] Unhandled sense code [ 76.351148] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 76.351155] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 76.351164] Descriptor sense data with sense descriptors (in hex): [ 76.351168] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 76.351182] 00 04 2a c0 [ 76.351188] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 76.351200] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 04 2a c0 00 00 10 00 [ 76.351215] end_request: I/O error, dev sda, sector 273088 [ 76.351225] Buffer I/O error on device sda4, logical block 1360 [ 76.351238] Buffer I/O error on device sda4, logical block 1361 [ 76.351270] ata1: EH complete [ 76.684094] EXT3-fs (sda5): recovery required on readonly filesystem [ 76.684106] EXT3-fs (sda5): write access will be enabled during recovery [ 89.714144] kjournald starting. Commit interval 5 seconds [ 89.714221] EXT3-fs (sda5): orphan cleanup on readonly fs [ 89.714237] ext3_orphan_cleanup: deleting unreferenced inode 2350412 [ 89.714467] ext3_orphan_cleanup: deleting unreferenced inode 2350292 [ 89.714507] ext3_orphan_cleanup: deleting unreferenced inode 2350272 [ 89.714527] ext3_orphan_cleanup: deleting unreferenced inode 2350258 [ 89.714548] ext3_orphan_cleanup: deleting unreferenced inode 2350232 [ 89.714569] ext3_orphan_cleanup: deleting unreferenced inode 2350133 [ 89.714587] EXT3-fs (sda5): 6 orphan inodes deleted [ 89.714592] EXT3-fs (sda5): recovery complete [ 90.237844] EXT3-fs (sda5): mounted filesystem with ordered data mode [ 141.244356] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 141.366755] udevd[292]: starting version 173 [ 141.754873] snd-powermac no longer handles any machines with a layout-id property in the device-tree, use snd-aoa. [ 141.768210] apm_emu: PMU APM Emulation initialized. [ 141.774166] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset [ 141.795062] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64 [ 141.804877] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0 [ 142.560665] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 [ 142.616607] Disabling lock debugging due to kernel taint [ 142.666175] input: Wacom Intuos2 4x5 as /devices/pci0001:10/0001:10:1b.2/usb1/1-2/1-2.1/1-2.1:1.0/input/input4 [ 142.681501] usbcore: registered new interface driver wacom [ 142.681513] wacom: v1.53:USB Wacom tablet driver [ 142.987693] type=1400 audit(1325953128.979:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=558 comm="apparmor_parser" [ 142.991715] type=1400 audit(1325953128.983:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=558 comm="apparmor_parser" [ 142.992269] type=1400 audit(1325953128.983:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=558 comm="apparmor_parser" [ 143.939402] type=1400 audit(1325953129.931:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=632 comm="apparmor_parser" [ 143.941826] type=1400 audit(1325953129.931:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=632 comm="apparmor_parser" [ 143.942381] type=1400 audit(1325953129.931:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=632 comm="apparmor_parser" [ 144.495079] snd-aoa-fabric-layout: Using direct GPIOs [ 144.520769] snd-aoa-fabric-layout: can use this codec [ 144.903316] type=1400 audit(1325953130.895:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=570 comm="apparmor_parser" [ 145.014791] Adding 4194300k swap on /dev/sda3. Priority:-1 extents:1 across:4194300k [ 145.227308] sungem_phy: PHY ID: 4061e4, addr: 0 [ 145.227659] gem 0002:20:0f.0: eth0: Found BCM5221 PHY [ 145.228396] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 145.390445] type=1400 audit(1325953131.379:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=635 comm="apparmor_parser" [ 147.635088] gem 0002:20:0f.0: eth0: Link is up at 100 Mbps, full-duplex [ 147.635203] gem 0002:20:0f.0: eth0: Pause is disabled [ 147.635727] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 149.115321] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 149.115332] ata1.00: BMDMA stat 0x4 [ 149.115340] ata1.00: failed command: READ DMA [ 149.115354] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 149.115357] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 149.115364] ata1.00: status: { DRDY ERR } [ 149.115368] ata1.00: error: { UNC } [ 149.131212] ata1.00: configured for UDMA/100 [ 149.147121] ata1.01: configured for UDMA/33 [ 149.147144] ata1: EH complete [ 153.125575] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 153.125583] ata1.00: BMDMA stat 0x4 [ 153.125590] ata1.00: failed command: READ DMA [ 153.125603] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 153.125607] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 153.125613] ata1.00: status: { DRDY ERR } [ 153.125618] ata1.00: error: { UNC } [ 153.147219] ata1.00: configured for UDMA/100 [ 153.163110] ata1.01: configured for UDMA/33 [ 153.163131] ata1: EH complete [ 157.146899] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 157.146906] ata1.00: BMDMA stat 0x4 [ 157.146912] ata1.00: failed command: READ DMA [ 157.146924] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 157.146928] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 157.146942] ata1.00: status: { DRDY ERR } [ 157.146947] ata1.00: error: { UNC } [ 157.171199] ata1.00: configured for UDMA/100 [ 157.187115] ata1.01: configured for UDMA/33 [ 157.187131] ata1: EH complete [ 161.179272] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 161.179280] ata1.00: BMDMA stat 0x4 [ 161.179285] ata1.00: failed command: READ DMA [ 161.179297] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 161.179300] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 161.179307] ata1.00: status: { DRDY ERR } [ 161.179311] ata1.00: error: { UNC } [ 161.203197] ata1.00: configured for UDMA/100 [ 161.219116] ata1.01: configured for UDMA/33 [ 161.219130] ata1: EH complete [ 165.211651] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 165.211658] ata1.00: BMDMA stat 0x4 [ 165.211663] ata1.00: failed command: READ DMA [ 165.211675] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 165.211678] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 165.211685] ata1.00: status: { DRDY ERR } [ 165.211690] ata1.00: error: { UNC } [ 165.236099] ata1.00: configured for UDMA/100 [ 165.251112] ata1.01: configured for UDMA/33 [ 165.251126] ata1: EH complete [ 169.244028] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 169.244035] ata1.00: BMDMA stat 0x4 [ 169.244040] ata1.00: failed command: READ DMA [ 169.244052] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 169.244056] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 169.244062] ata1.00: status: { DRDY ERR } [ 169.244067] ata1.00: error: { UNC } [ 169.259206] ata1.00: configured for UDMA/100 [ 169.275101] ata1.01: configured for UDMA/33 [ 169.275128] sd 0:0:0:0: [sda] Unhandled sense code [ 169.275133] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 169.275141] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 169.275149] Descriptor sense data with sense descriptors (in hex): [ 169.275153] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 169.275167] 00 04 01 b0 [ 169.275174] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 169.275186] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 04 01 b0 00 00 08 00 [ 169.275201] end_request: I/O error, dev sda, sector 262576 [ 169.275210] Buffer I/O error on device sda4, logical block 46 [ 169.275249] ata1: EH complete [ 173.453296] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 173.453305] ata1.00: BMDMA stat 0x4 [ 173.453313] ata1.00: failed command: READ DMA [ 173.453327] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 173.453330] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 173.453337] ata1.00: status: { DRDY ERR } [ 173.453342] ata1.00: error: { UNC } [ 173.467232] ata1.00: configured for UDMA/100 [ 173.483118] ata1.01: configured for UDMA/33 [ 173.483142] ata1: EH complete [ 177.463582] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 177.463592] ata1.00: BMDMA stat 0x4 [ 177.463599] ata1.00: failed command: READ DMA [ 177.463613] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 177.463617] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 177.463624] ata1.00: status: { DRDY ERR } [ 177.463628] ata1.00: error: { UNC } [ 177.487232] ata1.00: configured for UDMA/100 [ 177.503195] ata1.01: configured for UDMA/33 [ 177.503234] ata1: EH complete [ 181.495974] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 181.495985] ata1.00: BMDMA stat 0x4 [ 181.495992] ata1.00: failed command: READ DMA [ 181.496007] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 181.496010] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 181.496017] ata1.00: status: { DRDY ERR } [ 181.496021] ata1.00: error: { UNC } [ 181.519318] ata1.00: configured for UDMA/100 [ 181.535120] ata1.01: configured for UDMA/33 [ 181.535150] ata1: EH complete [ 185.528344] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 185.528354] ata1.00: BMDMA stat 0x4 [ 185.528361] ata1.00: failed command: READ DMA [ 185.528375] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 185.528378] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 185.528385] ata1.00: status: { DRDY ERR } [ 185.528390] ata1.00: error: { UNC } [ 185.551229] ata1.00: configured for UDMA/100 [ 185.567119] ata1.01: configured for UDMA/33 [ 185.567144] ata1: EH complete [ 189.560727] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 189.560737] ata1.00: BMDMA stat 0x4 [ 189.560745] ata1.00: failed command: READ DMA [ 189.560759] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 189.560762] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 189.560769] ata1.00: status: { DRDY ERR } [ 189.560774] ata1.00: error: { UNC } [ 189.583229] ata1.00: configured for UDMA/100 [ 189.599118] ata1.01: configured for UDMA/33 [ 189.599144] ata1: EH complete [ 193.593101] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 193.593111] ata1.00: BMDMA stat 0x4 [ 193.593119] ata1.00: failed command: READ DMA [ 193.593132] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 193.593136] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 193.593143] ata1.00: status: { DRDY ERR } [ 193.593147] ata1.00: error: { UNC } [ 193.615228] ata1.00: configured for UDMA/100 [ 193.631118] ata1.01: configured for UDMA/33 [ 193.631155] sd 0:0:0:0: [sda] Unhandled sense code [ 193.631160] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 193.631167] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 193.631175] Descriptor sense data with sense descriptors (in hex): [ 193.631180] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 193.631194] 00 04 01 b0 [ 193.631200] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 193.631212] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 04 01 b0 00 00 08 00 [ 193.631227] end_request: I/O error, dev sda, sector 262576 [ 193.631237] Buffer I/O error on device sda4, logical block 46 [ 193.631294] ata1: EH complete [ 197.614413] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 197.614423] ata1.00: BMDMA stat 0x4 [ 197.614430] ata1.00: failed command: READ DMA [ 197.614444] ata1.00: cmd c8/00:10:c0:2a:04/00:00:00:00:00/e0 tag 0 dma 8192 in [ 197.614448] res 51/40:10:c0:2a:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 197.614455] ata1.00: status: { DRDY ERR } [ 197.614459] ata1.00: error: { UNC } [ 197.635232] ata1.00: configured for UDMA/100 [ 197.651118] ata1.01: configured for UDMA/33 [ 197.651143] ata1: EH complete [ 201.635742] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 201.635751] ata1.00: BMDMA stat 0x4 [ 201.635759] ata1.00: failed command: READ DMA [ 201.635773] ata1.00: cmd c8/00:10:c0:2a:04/00:00:00:00:00/e0 tag 0 dma 8192 in [ 201.635776] res 51/40:10:c0:2a:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 201.635783] ata1.00: status: { DRDY ERR } [ 201.635788] ata1.00: error: { UNC } [ 201.659229] ata1.00: configured for UDMA/100 [ 201.675194] ata1.01: configured for UDMA/33 [ 201.675234] ata1: EH complete [ 205.657081] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 205.657091] ata1.00: BMDMA stat 0x4 [ 205.657099] ata1.00: failed command: READ DMA [ 205.657113] ata1.00: cmd c8/00:10:c0:2a:04/00:00:00:00:00/e0 tag 0 dma 8192 in [ 205.657116] res 51/40:10:c0:2a:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 205.657123] ata1.00: status: { DRDY ERR } [ 205.657128] ata1.00: error: { UNC } [ 205.679301] ata1.00: configured for UDMA/100 [ 205.695147] ata1.01: configured for UDMA/33 [ 205.695183] ata1: EH complete [ 209.667357] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 209.667366] ata1.00: BMDMA stat 0x4 [ 209.667373] ata1.00: failed command: READ DMA [ 209.667387] ata1.00: cmd c8/00:10:c0:2a:04/00:00:00:00:00/e0 tag 0 dma 8192 in [ 209.667391] res 51/40:10:c0:2a:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 209.667397] ata1.00: status: { DRDY ERR } [ 209.667402] ata1.00: error: { UNC } [ 209.691326] ata1.00: configured for UDMA/100 [ 209.707145] ata1.01: configured for UDMA/33 [ 209.707182] ata1: EH complete [ 213.699728] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 213.699737] ata1.00: BMDMA stat 0x4 [ 213.699745] ata1.00: failed command: READ DMA [ 213.699759] ata1.00: cmd c8/00:10:c0:2a:04/00:00:00:00:00/e0 tag 0 dma 8192 in [ 213.699762] res 51/40:10:c0:2a:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 213.699769] ata1.00: status: { DRDY ERR } [ 213.699774] ata1.00: error: { UNC } [ 213.715238] ata1.00: configured for UDMA/100 [ 213.731120] ata1.01: configured for UDMA/33 [ 213.731150] ata1: EH complete [ 217.710013] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 217.710022] ata1.00: BMDMA stat 0x4 [ 217.710030] ata1.00: failed command: READ DMA [ 217.710044] ata1.00: cmd c8/00:10:c0:2a:04/00:00:00:00:00/e0 tag 0 dma 8192 in [ 217.710047] res 51/40:10:c0:2a:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 217.710054] ata1.00: status: { DRDY ERR } [ 217.710059] ata1.00: error: { UNC } [ 217.723293] ata1.00: configured for UDMA/100 [ 217.739119] ata1.01: configured for UDMA/33 [ 217.739161] sd 0:0:0:0: [sda] Unhandled sense code [ 217.739166] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 217.739173] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 217.739181] Descriptor sense data with sense descriptors (in hex): [ 217.739186] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 217.739200] 00 04 2a c0 [ 217.739206] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 217.739218] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 04 2a c0 00 00 10 00 [ 217.739234] end_request: I/O error, dev sda, sector 273088 [ 217.739244] Buffer I/O error on device sda4, logical block 1360 [ 217.739258] Buffer I/O error on device sda4, logical block 1361 [ 217.739309] ata1: EH complete [ 222.438302] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 222.438311] ata1.00: BMDMA stat 0x4 [ 222.438319] ata1.00: failed command: READ DMA [ 222.438333] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 222.438336] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 222.438343] ata1.00: status: { DRDY ERR } [ 222.438348] ata1.00: error: { UNC } [ 222.451314] ata1.00: configured for UDMA/100 [ 222.467119] ata1.01: configured for UDMA/33 [ 222.467151] ata1: EH complete [ 226.470681] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 226.470900] ata1.00: BMDMA stat 0x4 [ 226.471023] ata1.00: failed command: READ DMA [ 226.471165] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 226.471168] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 226.471613] ata1.00: status: { DRDY ERR } [ 226.471735] ata1.00: error: { UNC } [ 226.495229] ata1.00: configured for UDMA/100 [ 226.511118] ata1.01: configured for UDMA/33 [ 226.511144] ata1: EH complete [ 230.492018] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 230.492237] ata1.00: BMDMA stat 0x4 [ 230.492345] ata1.00: failed command: READ DMA [ 230.492486] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 230.492490] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 230.492935] ata1.00: status: { DRDY ERR } [ 230.493057] ata1.00: error: { UNC } [ 230.515214] ata1.00: configured for UDMA/100 [ 230.531118] ata1.01: configured for UDMA/33 [ 230.531145] ata1: EH complete [ 234.513345] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 234.513563] ata1.00: BMDMA stat 0x4 [ 234.513672] ata1.00: failed command: READ DMA [ 234.513813] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 234.513816] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 234.514262] ata1.00: status: { DRDY ERR } [ 234.514383] ata1.00: error: { UNC } [ 234.527211] ata1.00: configured for UDMA/100 [ 234.543118] ata1.01: configured for UDMA/33 [ 234.543145] ata1: EH complete [ 238.523629] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 238.523847] ata1.00: BMDMA stat 0x4 [ 238.523956] ata1.00: failed command: READ DMA [ 238.524097] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 238.524100] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 238.524545] ata1.00: status: { DRDY ERR } [ 238.524667] ata1.00: error: { UNC } [ 238.539207] ata1.00: configured for UDMA/100 [ 238.555117] ata1.01: configured for UDMA/33 [ 238.555143] ata1: EH complete [ 242.533907] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 242.534126] ata1.00: BMDMA stat 0x4 [ 242.534234] ata1.00: failed command: READ DMA [ 242.534375] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 242.534379] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 242.534824] ata1.00: status: { DRDY ERR } [ 242.534964] ata1.00: error: { UNC } [ 242.551205] ata1.00: configured for UDMA/100 [ 242.567118] ata1.01: configured for UDMA/33 [ 242.567156] sd 0:0:0:0: [sda] Unhandled sense code [ 242.567161] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 242.567169] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 242.567177] Descriptor sense data with sense descriptors (in hex): [ 242.567181] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 242.567195] 00 04 01 b0 [ 242.567202] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 242.567214] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 04 01 b0 00 00 08 00 [ 242.567229] end_request: I/O error, dev sda, sector 262576 [ 242.567402] Buffer I/O error on device sda4, logical block 46 [ 242.567620] ata1: EH complete [ 246.566274] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 246.566493] ata1.00: BMDMA stat 0x4 [ 246.566602] ata1.00: failed command: READ DMA [ 246.566743] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 246.566746] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 246.567207] ata1.00: status: { DRDY ERR } [ 246.567329] ata1.00: error: { UNC } [ 246.583204] ata1.00: configured for UDMA/100 [ 246.599118] ata1.01: configured for UDMA/33 [ 246.599144] ata1: EH complete [ 250.576560] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 250.576779] ata1.00: BMDMA stat 0x4 [ 250.576888] ata1.00: failed command: READ DMA [ 250.577029] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 250.577032] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 250.588032] ata1.00: status: { DRDY ERR } [ 250.593504] ata1.00: error: { UNC } [ 250.615218] ata1.00: configured for UDMA/100 [ 250.631168] ata1.01: configured for UDMA/33 [ 250.631205] ata1: EH complete [ 254.597958] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 254.603530] ata1.00: BMDMA stat 0x4 [ 254.608892] ata1.00: failed command: READ DMA [ 254.614286] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 254.614290] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 254.625254] ata1.00: status: { DRDY ERR } [ 254.630742] ata1.00: error: { UNC } [ 254.651243] ata1.00: configured for UDMA/100 [ 254.667119] ata1.01: configured for UDMA/33 [ 254.667149] ata1: EH complete [ 258.630323] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 258.635894] ata1.00: BMDMA stat 0x4 [ 258.641251] ata1.00: failed command: READ DMA [ 258.646651] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 258.646655] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 258.657635] ata1.00: status: { DRDY ERR } [ 258.663124] ata1.00: error: { UNC } [ 258.683238] ata1.00: configured for UDMA/100 [ 258.699119] ata1.01: configured for UDMA/33 [ 258.699150] ata1: EH complete [ 262.673744] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 262.679325] ata1.00: BMDMA stat 0x4 [ 262.684688] ata1.00: failed command: READ DMA [ 262.690091] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 262.690095] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 262.701091] ata1.00: status: { DRDY ERR } [ 262.706593] ata1.00: error: { UNC } [ 262.727214] ata1.00: configured for UDMA/100 [ 262.743119] ata1.01: configured for UDMA/33 [ 262.743150] ata1: EH complete [ 266.706131] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 266.711721] ata1.00: BMDMA stat 0x4 [ 266.717084] ata1.00: failed command: READ DMA [ 266.722493] ata1.00: cmd c8/00:08:b0:01:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 266.722497] res 51/40:08:b0:01:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 266.733495] ata1.00: status: { DRDY ERR } [ 266.738993] ata1.00: error: { UNC } [ 266.759215] ata1.00: configured for UDMA/100 [ 266.775118] ata1.01: configured for UDMA/33 [ 266.775160] sd 0:0:0:0: [sda] Unhandled sense code [ 266.775165] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 266.775173] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 266.775181] Descriptor sense data with sense descriptors (in hex): [ 266.775185] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 266.775199] 00 04 01 b0 [ 266.775206] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 266.775218] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 04 01 b0 00 00 08 00 [ 266.775233] end_request: I/O error, dev sda, sector 262576 [ 266.780790] Buffer I/O error on device sda4, logical block 46 [ 266.786283] ata1: EH complete [ 270.771647] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 270.777298] ata1.00: BMDMA stat 0x4 [ 270.782775] ata1.00: failed command: READ DMA [ 270.788234] ata1.00: cmd c8/00:10:c0:2a:04/00:00:00:00:00/e0 tag 0 dma 8192 in [ 270.788238] res 51/40:10:c0:2a:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 270.799269] ata1.00: status: { DRDY ERR } [ 270.804788] ata1.00: error: { UNC } [ 270.831207] ata1.00: configured for UDMA/100 [ 270.847118] ata1.01: configured for UDMA/33 [ 270.847144] ata1: EH complete [ 274.815057] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 274.820668] ata1.00: BMDMA stat 0x4 [ 274.826066] ata1.00: failed command: READ DMA [ 274.831504] ata1.00: cmd c8/00:10:c0:2a:04/00:00:00:00:00/e0 tag 0 dma 8192 in [ 274.831507] res 51/40:10:c0:2a:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 274.842566] ata1.00: status: { DRDY ERR } [ 274.848100] ata1.00: error: { UNC } [ 274.875320] ata1.00: configured for UDMA/100 [ 274.891120] ata1.01: configured for UDMA/33 [ 274.891152] ata1: EH complete [ 278.858478] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 278.864092] ata1.00: BMDMA stat 0x4 [ 278.869497] ata1.00: failed command: READ DMA [ 278.875015] ata1.00: cmd c8/00:10:c0:2a:04/00:00:00:00:00/e0 tag 0 dma 8192 in [ 278.875018] res 51/40:10:c0:2a:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 278.886094] ata1.00: status: { DRDY ERR } [ 278.891627] ata1.00: error: { UNC } [ 278.911242] ata1.00: configured for UDMA/100 [ 278.927119] ata1.01: configured for UDMA/33 [ 278.927150] ata1: EH complete [ 282.890853] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 282.896472] ata1.00: BMDMA stat 0x4 [ 282.901870] ata1.00: failed command: READ DMA [ 282.907444] ata1.00: cmd c8/00:10:c0:2a:04/00:00:00:00:00/e0 tag 0 dma 8192 in [ 282.907448] res 51/40:10:c0:2a:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 282.918525] ata1.00: status: { DRDY ERR } [ 282.924059] ata1.00: error: { UNC } [ 282.943240] ata1.00: configured for UDMA/100 [ 282.959123] ata1.01: configured for UDMA/33 [ 282.959154] ata1: EH complete [ 286.923234] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 286.928869] ata1.00: BMDMA stat 0x4 [ 286.934280] ata1.00: failed command: READ DMA [ 286.939730] ata1.00: cmd c8/00:10:c0:2a:04/00:00:00:00:00/e0 tag 0 dma 8192 in [ 286.939734] res 51/40:10:c0:2a:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 286.950823] ata1.00: status: { DRDY ERR } [ 286.956365] ata1.00: error: { UNC } [ 286.975241] ata1.00: configured for UDMA/100 [ 286.991119] ata1.01: configured for UDMA/33 [ 286.991149] ata1: EH complete [ 290.966646] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 290.972284] ata1.00: BMDMA stat 0x4 [ 290.977699] ata1.00: failed command: READ DMA [ 290.983152] ata1.00: cmd c8/00:10:c0:2a:04/00:00:00:00:00/e0 tag 0 dma 8192 in [ 290.983156] res 51/40:10:c0:2a:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 290.994255] ata1.00: status: { DRDY ERR } [ 290.999806] ata1.00: error: { UNC } [ 291.019214] ata1.00: configured for UDMA/100 [ 291.035119] ata1.01: configured for UDMA/33 [ 291.035161] sd 0:0:0:0: [sda] Unhandled sense code [ 291.035166] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 291.035174] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 291.035182] Descriptor sense data with sense descriptors (in hex): [ 291.035186] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 291.035200] 00 04 2a c0 [ 291.035207] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 291.035219] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 04 2a c0 00 00 10 00 [ 291.035234] end_request: I/O error, dev sda, sector 273088 [ 291.040847] Buffer I/O error on device sda4, logical block 1360 [ 291.046369] Buffer I/O error on device sda4, logical block 1361 [ 291.051880] ata1: EH complete [ 295.032183] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 295.032194] ata1.00: BMDMA stat 0x4 [ 295.032201] ata1.00: failed command: READ DMA [ 295.032215] ata1.00: cmd c8/00:08:c0:2a:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 295.032218] res 51/40:08:c0:2a:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 295.032225] ata1.00: status: { DRDY ERR } [ 295.032230] ata1.00: error: { UNC } [ 295.055225] ata1.00: configured for UDMA/100 [ 295.071118] ata1.01: configured for UDMA/33 [ 295.071144] ata1: EH complete [ 299.042452] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 299.042462] ata1.00: BMDMA stat 0x4 [ 299.042469] ata1.00: failed command: READ DMA [ 299.042483] ata1.00: cmd c8/00:08:c0:2a:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 299.042486] res 51/40:08:c0:2a:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 299.042493] ata1.00: status: { DRDY ERR } [ 299.042498] ata1.00: error: { UNC } [ 299.063206] ata1.00: configured for UDMA/100 [ 299.079118] ata1.01: configured for UDMA/33 [ 299.079146] ata1: EH complete [ 303.052654] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 303.052663] ata1.00: BMDMA stat 0x4 [ 303.052671] ata1.00: failed command: READ DMA [ 303.052685] ata1.00: cmd c8/00:08:c0:2a:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 303.052688] res 51/40:08:c0:2a:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 303.052695] ata1.00: status: { DRDY ERR } [ 303.052700] ata1.00: error: { UNC } [ 303.067209] ata1.00: configured for UDMA/100 [ 303.083121] ata1.01: configured for UDMA/33 [ 303.083150] ata1: EH complete [ 307.062926] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 307.062962] ata1.00: BMDMA stat 0x4 [ 307.062969] ata1.00: failed command: READ DMA [ 307.062983] ata1.00: cmd c8/00:08:c0:2a:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 307.062987] res 51/40:08:c0:2a:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 307.062993] ata1.00: status: { DRDY ERR } [ 307.062998] ata1.00: error: { UNC } [ 307.079245] ata1.00: configured for UDMA/100 [ 307.095119] ata1.01: configured for UDMA/33 [ 307.095149] ata1: EH complete [ 311.073200] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 311.073211] ata1.00: BMDMA stat 0x4 [ 311.073218] ata1.00: failed command: READ DMA [ 311.073232] ata1.00: cmd c8/00:08:c0:2a:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 311.073235] res 51/40:08:c0:2a:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 311.073242] ata1.00: status: { DRDY ERR } [ 311.073247] ata1.00: error: { UNC } [ 311.087233] ata1.00: configured for UDMA/100 [ 311.103118] ata1.01: configured for UDMA/33 [ 311.103148] ata1: EH complete [ 315.083472] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 315.083482] ata1.00: BMDMA stat 0x4 [ 315.083489] ata1.00: failed command: READ DMA [ 315.083503] ata1.00: cmd c8/00:08:c0:2a:04/00:00:00:00:00/e0 tag 0 dma 4096 in [ 315.083506] res 51/40:08:c0:2a:04/00:00:00:00:00/e0 Emask 0x9 (media error) [ 315.083513] ata1.00: status: { DRDY ERR } [ 315.083518] ata1.00: error: { UNC } [ 315.107215] ata1.00: configured for UDMA/100 [ 315.123120] ata1.01: configured for UDMA/33 [ 315.123160] sd 0:0:0:0: [sda] Unhandled sense code [ 315.123165] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 315.123172] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 315.123180] Descriptor sense data with sense descriptors (in hex): [ 315.123185] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 315.123199] 00 04 2a c0 [ 315.123206] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 315.123218] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 04 2a c0 00 00 08 00 [ 315.123233] end_request: I/O error, dev sda, sector 273088 [ 315.123243] Buffer I/O error on device sda4, logical block 1360 [ 315.123301] ata1: EH complete [ 315.385686] EXT3-fs (sda5): using internal journal [ 315.875381] RPC: Registered named UNIX socket transport module. [ 315.875394] RPC: Registered udp transport module. [ 315.875398] RPC: Registered tcp transport module. [ 315.875402] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 315.917579] FS-Cache: Loaded [ 316.005593] FS-Cache: Netfs 'nfs' registered for caching [ 316.067313] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 316.721590] lp: driver loaded but no devices found [ 316.758148] ppdev: user-space parallel port driver [ 316.906081] type=1400 audit(1325953302.891:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=2387 comm="apparmor_parser" [ 316.910070] type=1400 audit(1325953302.899:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=2387 comm="apparmor_parser" [ 317.270787] init: ssh main process (2351) terminated with status 255 [ 436.715158] type=1400 audit(1325953425.668:12): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=2522 comm="apparmor_parser" [ 436.727591] type=1400 audit(1325953425.680:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=2523 comm="apparmor_parser" [ 436.736115] type=1400 audit(1325953425.688:14): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=2524 comm="apparmor_parser" [ 436.737056] type=1400 audit(1325953425.688:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2524 comm="apparmor_parser" [ 436.738050] type=1400 audit(1325953425.692:16): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=2524 comm="apparmor_parser" [ 436.766167] type=1400 audit(1325953425.720:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=2525 comm="apparmor_parser" [ 436.778974] type=1400 audit(1325953425.732:18): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=2525 comm="apparmor_parser" [ 436.786641] type=1400 audit(1325953425.740:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=2525 comm="apparmor_parser" [ 436.801953] type=1400 audit(1325953425.756:20): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=2527 comm="apparmor_parser" [ 436.811701] type=1400 audit(1325953425.764:21): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=2528 comm="apparmor_parser" [ 437.882892] init: apport pre-start process (2580) terminated with status 1 [ 438.102720] init: apport post-stop process (2644) terminated with status 1 [ 438.172880] init: kdm main process (2597) killed by TERM signal [ 438.225575] init: lightdm main process (2589) killed by TERM signal