xubuntu@xubuntu:~$ uname -a Linux xubuntu 3.2.0-18-generic #29-Ubuntu SMP Fri Mar 9 21:36:08 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux ------------------------------------------------------------- [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-18-generic (buildd@crested) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu3) ) #29-Ubuntu SMP Fri Mar 9 21:36:08 UTC 2012 (Ubuntu 3.2.0-18.29-generic 3.2.9) [ 0.000000] Command line: file=/cdrom/preseed/xubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000009ce3f000 (usable) [ 0.000000] BIOS-e820: 000000009ce3f000 - 000000009cebf000 (reserved) [ 0.000000] BIOS-e820: 000000009cebf000 - 000000009cfbf000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000009cfbf000 - 000000009cfff000 (ACPI data) [ 0.000000] BIOS-e820: 000000009cfff000 - 000000009d000000 (usable) [ 0.000000] BIOS-e820: 000000009d000000 - 000000009fa00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000015fe00000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP Pavilion dv7 Notebook PC/1659, BIOS F.1B 10/05/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x15fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FE0000000 write-back [ 0.000000] 2 base 09D000000 mask FFF000000 uncachable [ 0.000000] 3 base 09E000000 mask FFE000000 uncachable [ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 5 base 100000000 mask FC0000000 write-back [ 0.000000] 6 base 140000000 mask FF0000000 write-back [ 0.000000] 7 base 150000000 mask FF0000000 write-back [ 0.000000] 8 base 15FE00000 mask FFFE00000 uncachable [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0x9d000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000fe1b0] fe1b0 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-000000009d000000 [ 0.000000] 0000000000 - 009d000000 page 2M [ 0.000000] kernel direct mapping tables up to 9d000000 @ 1fffc000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-000000015fe00000 [ 0.000000] 0100000000 - 015fe00000 page 2M [ 0.000000] kernel direct mapping tables up to 15fe00000 @ 9ce38000-9ce3f000 [ 0.000000] RAMDISK: 7f112000 - 80000000 [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 000000009cffe120 00094 (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP 000000009cffc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: DSDT 000000009cfec000 0C553 (v01 HP INSYDE 00000000 MSFT 01000013) [ 0.000000] ACPI: FACS 000000009cf6c000 00040 [ 0.000000] ACPI: ASF! 000000009cffd000 000A5 (v32 HP INSYDE 00000001 MSFT 01000013) [ 0.000000] ACPI: HPET 000000009cffb000 00038 (v01 HP INSYDE 00000001 MSFT 01000013) [ 0.000000] ACPI: APIC 000000009cffa000 0008C (v02 HP INSYDE 00000001 MSFT 01000013) [ 0.000000] ACPI: MCFG 000000009cff9000 0003C (v01 HP INSYDE 00000001 MSFT 01000013) [ 0.000000] ACPI: SLIC 000000009cfeb000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000009cfea000 0051F (v01 HP INSYDE 00001000 MSFT 01000013) [ 0.000000] ACPI: BOOT 000000009cfe8000 00028 (v01 HP INSYDE 00000001 MSFT 01000013) [ 0.000000] ACPI: ASPT 000000009cfe5000 00034 (v07 HP INSYDE 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000009cfe4000 0090C (v01 HP INSYDE 00003000 INTL 20100806) [ 0.000000] ACPI: SSDT 000000009cfe3000 00996 (v01 HP INSYDE 00003000 INTL 20100806) [ 0.000000] ACPI: SSDT 000000009cfe2000 002DA (v01 HP INSYDE 00003000 INTL 20100806) [ 0.000000] ACPI: SSDT 000000009cfe1000 0035D (v01 HP INSYDE 00003000 INTL 20100806) [ 0.000000] ACPI: SSDT 000000009cfdb000 024A1 (v01 HP INSYDE 00001000 INTL 20100806) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000015fe00000 [ 0.000000] Initmem setup node 0 0000000000000000-000000015fe00000 [ 0.000000] NODE_DATA [000000015fdfb000 - 000000015fdfffff] [ 0.000000] [ffffea0000000000-ffffea00057fffff] PMD -> [ffff88015b400000-ffff88015f3fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0015fe00 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x0009ce3f [ 0.000000] 0: 0x0009cfff -> 0x0009d000 [ 0.000000] 0: 0x00100000 -> 0x0015fe00 [ 0.000000] On node 0 totalpages: 1035213 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3912 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 622208 pages, LIFO batch:31 [ 0.000000] Normal zone: 6136 pages used for memmap [ 0.000000] Normal zone: 386568 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000009ce3f000 - 000000009cebf000 [ 0.000000] PM: Registered nosave memory: 000000009cebf000 - 000000009cfbf000 [ 0.000000] PM: Registered nosave memory: 000000009cfbf000 - 000000009cfff000 [ 0.000000] PM: Registered nosave memory: 000000009d000000 - 000000009fa00000 [ 0.000000] PM: Registered nosave memory: 000000009fa00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000 [ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000 [ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000 [ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at 9fa00000 (gap: 9fa00000:40600000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88015fa00000 s83072 r8192 d23424 u262144 [ 0.000000] pcpu-alloc: s83072 r8192 d23424 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1012688 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: file=/cdrom/preseed/xubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3977236k/5765120k available (6561k kernel code, 1624268k absent, 163616k reserved, 6643k data, 920k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 2095.151 MHz processor. [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.30 BogoMIPS (lpj=8380604) [ 0.000007] pid_max: default: 32768 minimum: 301 [ 0.000030] Security Framework initialized [ 0.000044] AppArmor: AppArmor initialized [ 0.000045] Yama: becoming mindful. [ 0.000478] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001558] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.001998] Mount-cache hash table entries: 256 [ 0.002115] Initializing cgroup subsys cpuacct [ 0.002120] Initializing cgroup subsys memory [ 0.002128] Initializing cgroup subsys devices [ 0.002130] Initializing cgroup subsys freezer [ 0.002132] Initializing cgroup subsys blkio [ 0.002137] Initializing cgroup subsys perf_event [ 0.002165] CPU: Physical Processor ID: 0 [ 0.002166] CPU: Processor Core ID: 0 [ 0.002171] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.002172] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.002175] mce: CPU supports 7 MCE banks [ 0.002185] CPU0: Thermal monitoring handled by SMI [ 0.002192] using mwait in idle threads. [ 0.004953] ACPI: Core revision 20110623 [ 0.025273] ftrace: allocating 27033 entries in 107 pages [ 0.036568] x2apic not enabled, IRQ remapping init failed [ 0.036988] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.076612] CPU0: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz stepping 07 [ 0.183675] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver. [ 0.183681] PEBS disabled due to CPU errata. [ 0.183683] ... version: 3 [ 0.183685] ... bit width: 48 [ 0.183686] ... generic registers: 4 [ 0.183687] ... value mask: 0000ffffffffffff [ 0.183689] ... max period: 000000007fffffff [ 0.183690] ... fixed-purpose events: 3 [ 0.183691] ... event mask: 000000070000000f [ 0.183843] NMI watchdog enabled, takes one hw-pmu counter. [ 0.183917] Booting Node 0, Processors #1 [ 0.183920] smpboot cpu 1: start_ip = 98000 [ 0.271569] CPU1: Thermal monitoring handled by SMI [ 0.291589] NMI watchdog enabled, takes one hw-pmu counter. [ 0.291683] #2 [ 0.291685] smpboot cpu 2: start_ip = 98000 [ 0.379405] CPU2: Thermal monitoring handled by SMI [ 0.399428] NMI watchdog enabled, takes one hw-pmu counter. [ 0.399506] #3 [ 0.399507] smpboot cpu 3: start_ip = 98000 [ 0.487242] CPU3: Thermal monitoring handled by SMI [ 0.507351] NMI watchdog enabled, takes one hw-pmu counter. [ 0.507380] Brought up 4 CPUs [ 0.507382] Total of 4 processors activated (16761.69 BogoMIPS). [ 0.511354] devtmpfs: initialized [ 0.512093] EVM: security.selinux [ 0.512094] EVM: security.SMACK64 [ 0.512095] EVM: security.capability [ 0.512120] PM: Registering ACPI NVS region at 9cebf000 (1048576 bytes) [ 0.512912] print_constraints: dummy: [ 0.512942] RTC time: 18:54:23, date: 03/10/12 [ 0.512974] NET: Registered protocol family 16 [ 0.513070] Trying to unpack rootfs image as initramfs... [ 0.513076] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.513078] ACPI: bus type pci registered [ 0.513150] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.513153] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.557901] PCI: Using configuration type 1 for base access [ 0.558779] bio: create slab at 0 [ 0.558860] ACPI: Added _OSI(Module Device) [ 0.558862] ACPI: Added _OSI(Processor Device) [ 0.558864] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.558866] ACPI: Added _OSI(Processor Aggregator Device) [ 0.560710] ACPI: EC: Look up EC in DSDT [ 0.562453] ACPI: Executed 1 blocks of module-level executable AML code [ 3.990211] Freeing initrd memory: 15288k freed [ 3.994098] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 3.994624] ACPI: SSDT 000000009ce70798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100806) [ 3.995092] ACPI: Dynamic OEM Table Load: [ 3.995095] ACPI: SSDT (null) 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100806) [ 4.010265] ACPI: SSDT 000000009ce71a98 00303 (v01 PmRef ApIst 00003000 INTL 20100806) [ 4.010758] ACPI: Dynamic OEM Table Load: [ 4.010761] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100806) [ 4.022115] ACPI: SSDT 000000009ce6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20100806) [ 4.022573] ACPI: Dynamic OEM Table Load: [ 4.022575] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100806) [ 4.037479] ACPI: Interpreter enabled [ 4.037483] ACPI: (supports S0 S3 S4 S5) [ 4.037508] ACPI: Using IOAPIC for interrupt routing [ 4.046100] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 4.046497] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 4.046499] HEST: Table not found. [ 4.046502] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 4.046797] \_SB_.PCI0:_OSC invalid UUID [ 4.046798] _OSC request data:1 8 1f [ 4.046802] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 4.047307] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 4.047310] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 4.047312] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 4.047315] pci_root PNP0A08:00: host bridge window [mem 0x9fa00000-0xfeafffff] [ 4.047327] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600 [ 4.047368] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604 [ 4.047402] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 4.047405] pci 0000:00:01.0: PME# disabled [ 4.047426] pci 0000:00:02.0: [8086:0116] type 0 class 0x000300 [ 4.047437] pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit] [ 4.047444] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 4.047450] pci 0000:00:02.0: reg 20: [io 0x6000-0x603f] [ 4.047508] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780 [ 4.047533] pci 0000:00:16.0: reg 10: [mem 0xc7504000-0xc750400f 64bit] [ 4.047613] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 4.047618] pci 0000:00:16.0: PME# disabled [ 4.047654] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03 [ 4.047994] pci 0000:00:1a.0: reg 10: [mem 0xc750a000-0xc750a3ff] [ 4.049918] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 4.049923] pci 0000:00:1a.0: PME# disabled [ 4.049952] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403 [ 4.049970] pci 0000:00:1b.0: reg 10: [mem 0xc7500000-0xc7503fff 64bit] [ 4.050043] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 4.050048] pci 0000:00:1b.0: PME# disabled [ 4.050073] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604 [ 4.050157] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 4.050162] pci 0000:00:1c.0: PME# disabled [ 4.050186] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604 [ 4.050269] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 4.050274] pci 0000:00:1c.1: PME# disabled [ 4.050300] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604 [ 4.050382] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 4.050387] pci 0000:00:1c.2: PME# disabled [ 4.050413] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604 [ 4.050496] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 4.050501] pci 0000:00:1c.3: PME# disabled [ 4.050537] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03 [ 4.050864] pci 0000:00:1d.0: reg 10: [mem 0xc7509000-0xc75093ff] [ 4.052791] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 4.052796] pci 0000:00:1d.0: PME# disabled [ 4.052822] pci 0000:00:1f.0: [8086:1c49] type 0 class 0x000601 [ 4.052954] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106 [ 4.052974] pci 0000:00:1f.2: reg 10: [io 0x6098-0x609f] [ 4.052983] pci 0000:00:1f.2: reg 14: [io 0x60bc-0x60bf] [ 4.052992] pci 0000:00:1f.2: reg 18: [io 0x6090-0x6097] [ 4.053001] pci 0000:00:1f.2: reg 1c: [io 0x60b8-0x60bb] [ 4.053010] pci 0000:00:1f.2: reg 20: [io 0x6060-0x607f] [ 4.053020] pci 0000:00:1f.2: reg 24: [mem 0xc7508000-0xc75087ff] [ 4.053068] pci 0000:00:1f.2: PME# supported from D3hot [ 4.053072] pci 0000:00:1f.2: PME# disabled [ 4.053091] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05 [ 4.053109] pci 0000:00:1f.3: reg 10: [mem 0xc7506000-0xc75060ff 64bit] [ 4.053132] pci 0000:00:1f.3: reg 20: [io 0x6040-0x605f] [ 4.053197] pci 0000:01:00.0: [1002:6760] type 0 class 0x000300 [ 4.053215] pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref] [ 4.053228] pci 0000:01:00.0: reg 18: [mem 0xc6500000-0xc651ffff 64bit] [ 4.053238] pci 0000:01:00.0: reg 20: [io 0x5000-0x50ff] [ 4.053255] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref] [ 4.053296] pci 0000:01:00.0: supports D1 D2 [ 4.057879] pci 0000:00:01.0: PCI bridge to [bus 01-06] [ 4.057887] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 4.057894] pci 0000:00:01.0: bridge window [mem 0xc6500000-0xc74fffff] [ 4.057904] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref] [ 4.058039] pci 0000:07:00.0: [10ec:8168] type 0 class 0x000200 [ 4.058061] pci 0000:07:00.0: reg 10: [io 0x4000-0x40ff] [ 4.058097] pci 0000:07:00.0: reg 18: [mem 0xc0404000-0xc0404fff 64bit pref] [ 4.058120] pci 0000:07:00.0: reg 20: [mem 0xc0400000-0xc0403fff 64bit pref] [ 4.058216] pci 0000:07:00.0: supports D1 D2 [ 4.058218] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.058224] pci 0000:07:00.0: PME# disabled [ 4.065873] pci 0000:00:1c.0: PCI bridge to [bus 07-0c] [ 4.065882] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 4.065892] pci 0000:00:1c.0: bridge window [mem 0xc5500000-0xc64fffff] [ 4.065907] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref] [ 4.066063] pci 0000:0d:00.0: [1814:539f] type 0 class 0x000280 [ 4.066093] pci 0000:0d:00.0: reg 10: [mem 0xc4500000-0xc450ffff] [ 4.073878] pci 0000:00:1c.1: PCI bridge to [bus 0d-12] [ 4.073888] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 4.073899] pci 0000:00:1c.1: bridge window [mem 0xc4500000-0xc54fffff] [ 4.073917] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref] [ 4.074034] pci 0000:13:00.0: [10ec:5209] type 0 class 0x00ff00 [ 4.074058] pci 0000:13:00.0: reg 10: [mem 0xc3500000-0xc3500fff] [ 4.074144] pci 0000:13:00.0: reg 30: [mem 0xffff0000-0xffffffff pref] [ 4.074217] pci 0000:13:00.0: supports D1 D2 [ 4.074219] pci 0000:13:00.0: PME# supported from D1 D2 D3hot [ 4.074225] pci 0000:13:00.0: PME# disabled [ 4.081848] pci 0000:00:1c.2: PCI bridge to [bus 13-18] [ 4.081858] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 4.081868] pci 0000:00:1c.2: bridge window [mem 0xc3500000-0xc44fffff] [ 4.081883] pci 0000:00:1c.2: bridge window [mem 0xc2400000-0xc33fffff 64bit pref] [ 4.082091] pci 0000:19:00.0: [1033:0194] type 0 class 0x000c03 [ 4.082143] pci 0000:19:00.0: reg 10: [mem 0xc3400000-0xc3401fff 64bit] [ 4.082463] pci 0000:19:00.0: PME# supported from D0 D3hot D3cold [ 4.082473] pci 0000:19:00.0: PME# disabled [ 4.089893] pci 0000:00:1c.3: PCI bridge to [bus 19-19] [ 4.089908] pci 0000:00:1c.3: bridge window [mem 0xc3400000-0xc34fffff] [ 4.089975] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 4.090103] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 4.090134] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 4.090163] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 4.090193] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 4.090234] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT] [ 4.090307] \_SB_.PCI0:_OSC invalid UUID [ 4.090309] _OSC request data:1 1f 1f [ 4.090313] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 4.090342] \_SB_.PCI0:_OSC invalid UUID [ 4.090344] _OSC request data:1 0 1d [ 4.090347] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d [ 4.090349] ACPI _OSC control for PCIe not granted, disabling ASPM [ 4.093777] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 4.093833] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 10 11 12 14 15) [ 4.093884] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 *4 5 6 10 11 12 14 15) [ 4.093932] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 4.093976] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 4.094021] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 *5 6 10 11 12 14 15) [ 4.094065] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 4.094109] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 4.094213] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 4.094221] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none [ 4.094224] vgaarb: loaded [ 4.094226] vgaarb: bridge control possible 0000:01:00.0 [ 4.094227] vgaarb: no bridge control possible 0000:00:02.0 [ 4.094314] i2c-core: driver [aat2870] using legacy suspend method [ 4.094316] i2c-core: driver [aat2870] using legacy resume method [ 4.094372] SCSI subsystem initialized [ 4.094422] libata version 3.00 loaded. [ 4.094460] usbcore: registered new interface driver usbfs [ 4.094471] usbcore: registered new interface driver hub [ 4.094493] usbcore: registered new device driver usb [ 4.094564] PCI: Using ACPI for IRQ routing [ 4.102094] PCI: pci_cache_line_size set to 64 bytes [ 4.102259] reserve RAM buffer: 000000000009d800 - 000000000009ffff [ 4.102262] reserve RAM buffer: 000000009ce3f000 - 000000009fffffff [ 4.102265] reserve RAM buffer: 000000009d000000 - 000000009fffffff [ 4.102267] reserve RAM buffer: 000000015fe00000 - 000000015fffffff [ 4.102353] NetLabel: Initializing [ 4.102354] NetLabel: domain hash size = 128 [ 4.102356] NetLabel: protocols = UNLABELED CIPSOv4 [ 4.102367] NetLabel: unlabeled traffic allowed by default [ 4.102414] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 4.102420] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 4.104433] Switching to clocksource hpet [ 4.110290] AppArmor: AppArmor Filesystem Enabled [ 4.110315] pnp: PnP ACPI init [ 4.110330] ACPI: bus type pnp registered [ 4.110623] pnp 00:00: [bus 00-fe] [ 4.110625] pnp 00:00: [io 0x0000-0x0cf7 window] [ 4.110628] pnp 00:00: [io 0x0cf8-0x0cff] [ 4.110630] pnp 00:00: [io 0x0d00-0xffff window] [ 4.110632] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 4.110634] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 4.110636] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 4.110638] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 4.110640] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 4.110642] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 4.110644] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 4.110646] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 4.110648] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 4.110650] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 4.110652] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 4.110654] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 4.110656] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 4.110658] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 4.110660] pnp 00:00: [mem 0x9fa00000-0xfeafffff window] [ 4.110725] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 4.110745] pnp 00:01: [io 0x0000-0x001f] [ 4.110746] pnp 00:01: [io 0x0081-0x0091] [ 4.110748] pnp 00:01: [io 0x0093-0x009f] [ 4.110750] pnp 00:01: [io 0x00c0-0x00df] [ 4.110752] pnp 00:01: [dma 4] [ 4.110774] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 4.110782] pnp 00:02: [mem 0xff000000-0xffffffff] [ 4.110800] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 4.110878] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 4.110899] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 4.110909] pnp 00:04: [io 0x00f0] [ 4.110918] pnp 00:04: [irq 13] [ 4.110939] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 4.110949] pnp 00:05: [io 0x002e-0x002f] [ 4.110951] pnp 00:05: [io 0x004e-0x004f] [ 4.110952] pnp 00:05: [io 0x0061] [ 4.110954] pnp 00:05: [io 0x0063] [ 4.110956] pnp 00:05: [io 0x0065] [ 4.110957] pnp 00:05: [io 0x0067] [ 4.110959] pnp 00:05: [io 0x0070] [ 4.110960] pnp 00:05: [io 0x0080] [ 4.110962] pnp 00:05: [io 0x0092] [ 4.110963] pnp 00:05: [io 0x00b2-0x00b3] [ 4.110965] pnp 00:05: [io 0x0680-0x069f] [ 4.110967] pnp 00:05: [io 0x1000-0x100f] [ 4.110970] pnp 00:05: [io 0x1010-0x1013] [ 4.110972] pnp 00:05: [io 0xffff] [ 4.110973] pnp 00:05: [io 0x0400-0x0453] [ 4.110975] pnp 00:05: [io 0x0458-0x047f] [ 4.110977] pnp 00:05: [io 0x0500-0x057f] [ 4.110978] pnp 00:05: [io 0x164e-0x164f] [ 4.111025] system 00:05: [io 0x0680-0x069f] has been reserved [ 4.111027] system 00:05: [io 0x1000-0x100f] has been reserved [ 4.111030] system 00:05: [io 0x1010-0x1013] has been reserved [ 4.111032] system 00:05: [io 0xffff] has been reserved [ 4.111034] system 00:05: [io 0x0400-0x0453] has been reserved [ 4.111036] system 00:05: [io 0x0458-0x047f] has been reserved [ 4.111039] system 00:05: [io 0x0500-0x057f] has been reserved [ 4.111041] system 00:05: [io 0x164e-0x164f] has been reserved [ 4.111044] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 4.111052] pnp 00:06: [io 0x0070-0x0077] [ 4.111057] pnp 00:06: [irq 8] [ 4.111077] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 4.111095] pnp 00:07: [io 0x0454-0x0457] [ 4.111129] system 00:07: [io 0x0454-0x0457] has been reserved [ 4.111132] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 4.111161] pnp 00:08: [io 0x0060] [ 4.111163] pnp 00:08: [io 0x0064] [ 4.111168] pnp 00:08: [irq 1] [ 4.111190] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 4.111219] pnp 00:09: [irq 12] [ 4.111241] pnp 00:09: Plug and Play ACPI device, IDs SYN1e47 SYN1e00 SYN0002 PNP0f13 (active) [ 4.111334] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff] [ 4.111336] pnp 00:0a: [mem 0xfed10000-0xfed17fff] [ 4.111338] pnp 00:0a: [mem 0xfed18000-0xfed18fff] [ 4.111340] pnp 00:0a: [mem 0xfed19000-0xfed19fff] [ 4.111342] pnp 00:0a: [mem 0xe0000000-0xefffffff] [ 4.111343] pnp 00:0a: [mem 0xfed20000-0xfed3ffff] [ 4.111345] pnp 00:0a: [mem 0xfed90000-0xfed93fff] [ 4.111347] pnp 00:0a: [mem 0xff000000-0xffffffff] [ 4.111349] pnp 00:0a: [mem 0xfee00000-0xfeefffff] [ 4.111351] pnp 00:0a: [mem 0x9fa00000-0x9fa00fff] [ 4.111391] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 4.111394] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved [ 4.111396] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved [ 4.111399] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved [ 4.111403] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 4.111405] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved [ 4.111408] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved [ 4.111410] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved [ 4.111413] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved [ 4.111415] system 00:0a: [mem 0x9fa00000-0x9fa00fff] has been reserved [ 4.111418] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 4.112577] pnp 00:0b: [irq 23] [ 4.112620] pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active) [ 4.112640] pnp 00:0c: [mem 0x20000000-0x201fffff] [ 4.112642] pnp 00:0c: [mem 0x40000000-0x401fffff] [ 4.112695] system 00:0c: [mem 0x20000000-0x201fffff] could not be reserved [ 4.112698] system 00:0c: [mem 0x40000000-0x401fffff] could not be reserved [ 4.112701] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 4.112719] pnp: PnP ACPI: found 13 devices [ 4.112721] ACPI: ACPI bus type pnp unregistered [ 4.119350] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] [ 4.119354] pci 0000:13:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref] [ 4.119359] PCI: max bus depth: 1 pci_try_num: 2 [ 4.119401] pci 0000:01:00.0: BAR 6: assigned [mem 0xc6520000-0xc653ffff pref] [ 4.119404] pci 0000:00:01.0: PCI bridge to [bus 01-06] [ 4.119406] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 4.119410] pci 0000:00:01.0: bridge window [mem 0xc6500000-0xc74fffff] [ 4.119413] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref] [ 4.119417] pci 0000:00:1c.0: PCI bridge to [bus 07-0c] [ 4.119421] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 4.119426] pci 0000:00:1c.0: bridge window [mem 0xc5500000-0xc64fffff] [ 4.119431] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref] [ 4.119439] pci 0000:00:1c.1: PCI bridge to [bus 0d-12] [ 4.119442] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 4.119448] pci 0000:00:1c.1: bridge window [mem 0xc4500000-0xc54fffff] [ 4.119453] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref] [ 4.119461] pci 0000:13:00.0: BAR 6: assigned [mem 0xc2400000-0xc240ffff pref] [ 4.119463] pci 0000:00:1c.2: PCI bridge to [bus 13-18] [ 4.119467] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 4.119472] pci 0000:00:1c.2: bridge window [mem 0xc3500000-0xc44fffff] [ 4.119477] pci 0000:00:1c.2: bridge window [mem 0xc2400000-0xc33fffff 64bit pref] [ 4.119485] pci 0000:00:1c.3: PCI bridge to [bus 19-19] [ 4.119490] pci 0000:00:1c.3: bridge window [mem 0xc3400000-0xc34fffff] [ 4.119510] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.119514] pci 0000:00:01.0: setting latency timer to 64 [ 4.119524] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 4.119529] pci 0000:00:1c.0: setting latency timer to 64 [ 4.119536] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 4.119541] pci 0000:00:1c.1: setting latency timer to 64 [ 4.119551] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.119556] pci 0000:00:1c.2: setting latency timer to 64 [ 4.119566] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 4.119571] pci 0000:00:1c.3: setting latency timer to 64 [ 4.119576] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 4.119578] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 4.119580] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 4.119582] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff] [ 4.119585] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] [ 4.119587] pci_bus 0000:01: resource 1 [mem 0xc6500000-0xc74fffff] [ 4.119589] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref] [ 4.119592] pci_bus 0000:07: resource 0 [io 0x4000-0x4fff] [ 4.119594] pci_bus 0000:07: resource 1 [mem 0xc5500000-0xc64fffff] [ 4.119596] pci_bus 0000:07: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref] [ 4.119599] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff] [ 4.119601] pci_bus 0000:0d: resource 1 [mem 0xc4500000-0xc54fffff] [ 4.119603] pci_bus 0000:0d: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref] [ 4.119606] pci_bus 0000:13: resource 0 [io 0x2000-0x2fff] [ 4.119608] pci_bus 0000:13: resource 1 [mem 0xc3500000-0xc44fffff] [ 4.119610] pci_bus 0000:13: resource 2 [mem 0xc2400000-0xc33fffff 64bit pref] [ 4.119613] pci_bus 0000:19: resource 1 [mem 0xc3400000-0xc34fffff] [ 4.119642] NET: Registered protocol family 2 [ 4.119787] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 4.120730] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 4.122490] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 4.122708] TCP: Hash tables configured (established 524288 bind 65536) [ 4.122710] TCP reno registered [ 4.122719] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 4.122742] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 4.122828] NET: Registered protocol family 1 [ 4.122843] pci 0000:00:02.0: Boot video device [ 4.122858] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.136206] pci 0000:00:1a.0: PCI INT A disabled [ 4.136262] pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 4.152167] pci 0000:00:1d.0: PCI INT A disabled [ 4.152295] pci 0000:19:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 4.164117] pci 0000:19:00.0: PCI INT A disabled [ 4.164124] PCI: CLS 64 bytes, default 64 [ 4.164126] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 4.164128] Placing 64MB software IO TLB between ffff880098e38000 - ffff88009ce38000 [ 4.164130] software IO TLB at phys 0x98e38000 - 0x9ce38000 [ 4.164141] Simple Boot Flag at 0x44 set to 0x1 [ 4.164584] audit: initializing netlink socket (disabled) [ 4.164592] type=2000 audit(1331405666.996:1): initialized [ 4.194306] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 4.209003] VFS: Disk quotas dquot_6.5.2 [ 4.209054] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 4.209501] fuse init (API version 7.17) [ 4.209581] msgmni has been set to 7797 [ 4.209921] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 4.209947] io scheduler noop registered [ 4.209950] io scheduler deadline registered [ 4.209977] io scheduler cfq registered (default) [ 4.210063] pcieport 0000:00:01.0: setting latency timer to 64 [ 4.210091] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 4.210324] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 4.210344] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 4.210386] intel_idle: MWAIT substates: 0x21120 [ 4.210388] intel_idle: v0.4 model 0x2A [ 4.210389] intel_idle: lapic_timer_reliable_states 0xffffffff [ 4.212004] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 4.212979] ACPI: AC Adapter [AC] (on-line) [ 4.213093] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0D:00/input/input0 [ 4.214710] ACPI: Lid Switch [LID] [ 4.214782] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 4.214786] ACPI: Power Button [PWRB] [ 4.214820] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 4.214823] ACPI: Power Button [PWRF] [ 4.228836] thermal LNXTHERM:00: registered as thermal_zone0 [ 4.228843] ACPI: Thermal Zone [THRM] (59 C) [ 4.228899] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 4.228921] ACPI: Battery Slot [BAT0] (battery absent) [ 4.228944] ERST: Table is not found! [ 4.228946] GHES: HEST is not enabled! [ 4.229006] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 4.229774] ACPI: Battery Slot [BAT0] (battery absent) [ 4.456179] Linux agpgart interface v0.103 [ 4.456256] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset [ 4.456364] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 4.457519] agpgart-intel 0000:00:00.0: detected 32768K stolen memory [ 4.457633] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000 [ 4.458897] brd: module loaded [ 4.459555] loop: module loaded [ 4.459661] ahci 0000:00:1f.2: version 3.0 [ 4.459687] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 4.459733] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 4.475695] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x21 impl SATA mode [ 4.475704] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 4.475715] ahci 0000:00:1f.2: setting latency timer to 64 [ 4.484169] scsi0 : ahci [ 4.484245] scsi1 : ahci [ 4.484307] scsi2 : ahci [ 4.484370] scsi3 : ahci [ 4.484433] scsi4 : ahci [ 4.484493] scsi5 : ahci [ 4.484580] ata1: SATA max UDMA/133 abar m2048@0xc7508000 port 0xc7508100 irq 41 [ 4.484582] ata2: DUMMY [ 4.484583] ata3: DUMMY [ 4.484584] ata4: DUMMY [ 4.484586] ata5: DUMMY [ 4.484588] ata6: SATA max UDMA/133 abar m2048@0xc7508000 port 0xc7508380 irq 41 [ 4.484935] Fixed MDIO Bus: probed [ 4.484950] tun: Universal TUN/TAP device driver, 1.6 [ 4.484952] tun: (C) 1999-2004 Max Krasnyansky [ 4.485008] PPP generic driver version 2.4.2 [ 4.485106] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.485120] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.485138] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 4.485142] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 4.485185] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 4.485210] ehci_hcd 0000:00:1a.0: debug port 2 [ 4.489097] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 4.489112] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc750a000 [ 4.503631] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 4.503831] hub 1-0:1.0: USB hub found [ 4.503836] hub 1-0:1.0: 2 ports detected [ 4.503889] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 4.503904] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 4.503907] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 4.503949] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 4.503971] ehci_hcd 0000:00:1d.0: debug port 2 [ 4.507837] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 4.507852] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xc7509000 [ 4.523600] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 4.523785] hub 2-0:1.0: USB hub found [ 4.523788] hub 2-0:1.0: 2 ports detected [ 4.523840] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.523851] uhci_hcd: USB Universal Host Controller Interface driver [ 4.523881] xhci_hcd 0000:19:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 4.523901] xhci_hcd 0000:19:00.0: setting latency timer to 64 [ 4.523907] xhci_hcd 0000:19:00.0: xHCI Host Controller [ 4.523951] xhci_hcd 0000:19:00.0: new USB bus registered, assigned bus number 3 [ 4.524148] xhci_hcd 0000:19:00.0: irq 19, io mem 0xc3400000 [ 4.524253] xhci_hcd 0000:19:00.0: irq 42 for MSI/MSI-X [ 4.524261] xhci_hcd 0000:19:00.0: irq 43 for MSI/MSI-X [ 4.524265] xhci_hcd 0000:19:00.0: irq 44 for MSI/MSI-X [ 4.524270] xhci_hcd 0000:19:00.0: irq 45 for MSI/MSI-X [ 4.524274] xhci_hcd 0000:19:00.0: irq 46 for MSI/MSI-X [ 4.524450] xHCI xhci_add_endpoint called for root hub [ 4.524452] xHCI xhci_check_bandwidth called for root hub [ 4.524475] hub 3-0:1.0: USB hub found [ 4.524484] hub 3-0:1.0: 2 ports detected [ 4.524532] xhci_hcd 0000:19:00.0: xHCI Host Controller [ 4.524572] xhci_hcd 0000:19:00.0: new USB bus registered, assigned bus number 4 [ 4.527625] xHCI xhci_add_endpoint called for root hub [ 4.527627] xHCI xhci_check_bandwidth called for root hub [ 4.527649] hub 4-0:1.0: USB hub found [ 4.527659] hub 4-0:1.0: 2 ports detected [ 4.579595] usbcore: registered new interface driver libusual [ 4.579667] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 4.589978] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.589983] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.590099] mousedev: PS/2 mouse device common for all mice [ 4.590260] rtc_cmos 00:06: RTC can wake from S4 [ 4.590367] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 4.590395] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 4.590461] device-mapper: uevent: version 1.0.3 [ 4.590534] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 4.590644] cpuidle: using governor ladder [ 4.590809] cpuidle: using governor menu [ 4.590811] EFI Variables Facility v0.08 2004-May-17 [ 4.590983] TCP cubic registered [ 4.591070] NET: Registered protocol family 10 [ 4.591433] NET: Registered protocol family 17 [ 4.591445] Registering the dns_resolver key type [ 4.591599] PM: Hibernation image not present or could not be loaded. [ 4.591613] registered taskstats version 1 [ 4.601622] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 4.604557] Magic number: 4:532:948 [ 4.604587] tty tty5: hash matches [ 4.604661] rtc_cmos 00:06: setting system clock to 2012-03-10 18:54:27 UTC (1331405667) [ 4.605466] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 4.605468] EDD information not available. [ 4.803271] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.803314] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.803765] ata1.00: ATA-8: TOSHIBA MK5061GSYN, MH000C, max UDMA/100 [ 4.803775] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 4.804240] ata1.00: configured for UDMA/100 [ 4.804570] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK5061GS MH00 PQ: 0 ANSI: 5 [ 4.804740] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.804769] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 4.804914] sd 0:0:0:0: [sda] Write Protect is off [ 4.804918] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.805036] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.805291] ata6.00: ATAPI: hp CDDVDW TS-L633R, 0300, max UDMA/100 [ 4.807701] ata6.00: configured for UDMA/100 [ 4.808856] scsi 5:0:0:0: CD-ROM hp CDDVDW TS-L633R 0300 PQ: 0 ANSI: 5 [ 4.812013] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.812023] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.812316] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 4.812460] sr 5:0:0:0: Attached scsi generic sg1 type 5 [ 4.815252] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 4.947731] hub 1-1:1.0: USB hub found [ 4.947917] hub 1-1:1.0: 6 ports detected [ 5.058898] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 5.162729] Refined TSC clocksource calibration: 2095.240 MHz. [ 5.162742] Switching to clocksource tsc [ 5.191524] hub 2-1:1.0: USB hub found [ 5.191673] hub 2-1:1.0: 6 ports detected [ 5.248706] sda: sda1 sda2 sda3 sda4 [ 5.249723] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.251251] Freeing unused kernel memory: 920k freed [ 5.251357] Write protecting the kernel read-only data: 12288k [ 5.256411] Freeing unused kernel memory: 1612k freed [ 5.260331] Freeing unused kernel memory: 1200k freed [ 5.262666] usb 1-1.1: new full-speed USB device number 3 using ehci_hcd [ 5.278713] udevd[112]: starting version 175 [ 5.306266] [drm] Initialized drm 1.1.0 20060810 [ 5.312298] wmi: Mapper loaded [ 5.326524] [drm] radeon defaulting to kernel modesetting. [ 5.326528] [drm] radeon kernel modesetting enabled. [ 5.326548] VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle [ 5.326602] radeon 0000:01:00.0: enabling device (0000 -> 0003) [ 5.326614] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.326621] radeon 0000:01:00.0: setting latency timer to 64 [ 5.328050] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6760 0x103C:0x1659). [ 5.328121] [drm] register mmio base: 0xC6500000 [ 5.328123] [drm] register mmio size: 131072 [ 5.331207] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.331213] i915 0000:00:02.0: setting latency timer to 64 [ 5.331362] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 5.331381] r8169 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.331423] r8169 0000:07:00.0: setting latency timer to 64 [ 5.331509] r8169 0000:07:00.0: irq 47 for MSI/MSI-X [ 5.331916] r8169 0000:07:00.0: eth0: RTL8168e/8111e at 0xffffc90001104000, 68:b5:99:e1:c0:c7, XID 0c200000 IRQ 47 [ 5.331919] r8169 0000:07:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 5.434423] usb 1-1.2: new high-speed USB device number 4 using ehci_hcd [ 5.642082] usb 2-1.2: new low-speed USB device number 3 using ehci_hcd [ 5.834247] input: 2.4GRF Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input4 [ 5.834409] generic-usb 0003:04F3:00A3.0001: input,hidraw0: USB HID v1.10 Mouse [2.4GRF Mouse] on usb-0000:00:1d.0-1.2/input0 [ 5.834434] usbcore: registered new interface driver usbhid [ 5.834437] usbhid: USB HID core driver [ 5.881779] usb 2-1.5: new full-speed USB device number 4 using ehci_hcd [ 6.241509] ATOM BIOS: HP/Flex [ 6.241884] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 6.241887] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF [ 6.244280] [drm] Detected VRAM RAM=1024M, BAR=256M [ 6.244284] [drm] RAM width 64bits DDR [ 6.244346] [TTM] Zone kernel: Available graphics memory: 1998128 kiB. [ 6.244348] [TTM] Initializing pool allocator. [ 6.244371] [drm] radeon: 1024M of VRAM memory ready [ 6.244373] [drm] radeon: 512M of GTT memory ready. [ 6.244385] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 6.244387] [drm] Driver supports precise vblank timestamp query. [ 6.244434] radeon 0000:01:00.0: irq 48 for MSI/MSI-X [ 6.244441] radeon 0000:01:00.0: radeon: using MSI. [ 6.244500] [drm] radeon: irq initialized. [ 6.244504] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 6.244911] [drm] Loading CAICOS Microcode [ 6.252095] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). [ 6.252224] radeon 0000:01:00.0: WB enabled [ 6.268541] [drm] ring test succeeded in 3 usecs [ 6.268650] [drm] radeon: ib pool ready. [ 6.268813] [drm] ib test succeeded in 0 usecs [ 6.269040] [drm] Radeon Display Connectors [ 6.269057] [drm] Internal thermal controller with fan control [ 6.270106] [drm] radeon: power management initialized [ 6.270257] No connectors reported connected with modes [ 6.270259] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.271981] [drm] fb mappable at 0xA0142000 [ 6.271983] [drm] vram apper at 0xA0000000 [ 6.271984] [drm] size 3145728 [ 6.271986] [drm] fb depth is 24 [ 6.271987] [drm] pitch is 4096 [ 6.274454] Console: switching to colour frame buffer device 128x48 [ 6.276228] fb0: radeondrmfb frame buffer device [ 6.276230] drm: registered panic notifier [ 6.276234] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0 [ 6.331275] mtrr: no more MTRRs available [ 6.331278] [drm] MTRR allocation failed. Graphics performance may suffer. [ 6.331565] i915 0000:00:02.0: irq 49 for MSI/MSI-X [ 6.331570] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 6.331571] [drm] Driver supports precise vblank timestamp query. [ 6.332594] vga_switcheroo: enabled [ 6.332655] radeon atpx: version is 1 [ 6.332679] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none [ 6.332683] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 6.850377] fbcon: inteldrmfb (fb1) is primary device [ 6.850381] fbcon: Remapping primary device, fb1, to tty 1-63 [ 7.333401] fb1: inteldrmfb frame buffer device [ 7.333585] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS [ 7.444111] acpi device:2f: registered as cooling_device4 [ 7.444379] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input5 [ 7.444441] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no) [ 7.555962] acpi device:3c: registered as cooling_device5 [ 7.556275] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input6 [ 7.556351] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 7.556390] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1 [ 8.137635] Btrfs loaded [ 8.142530] xor: automatically using best checksumming function: generic_sse [ 8.162158] generic_sse: 9372.000 MB/sec [ 8.162162] xor: using function: generic_sse (9372.000 MB/sec) [ 8.162718] device-mapper: dm-raid45: initialized v0.2594b [ 9.797346] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 9.841302] ISO 9660 Extensions: RRIP_1991A [ 10.239383] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 59.603132] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 59.949108] udevd[1221]: starting version 175 [ 64.508312] device-mapper: multipath: version 1.3.0 loaded [ 64.633220] Bluetooth: Core ver 2.16 [ 64.633669] NET: Registered protocol family 31 [ 64.633673] Bluetooth: HCI device and connection manager initialized [ 64.633676] Bluetooth: HCI socket layer initialized [ 64.633678] Bluetooth: L2CAP socket layer initialized [ 64.633686] Bluetooth: SCO socket layer initialized [ 65.130845] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 65.131680] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 65.131689] mei 0000:00:16.0: setting latency timer to 64 [ 65.131764] mei 0000:00:16.0: irq 50 for MSI/MSI-X [ 65.571851] Bluetooth: RFCOMM TTY layer initialized [ 65.571865] Bluetooth: RFCOMM socket layer initialized [ 65.571868] Bluetooth: RFCOMM ver 1.11 [ 65.574037] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 65.574812] usbcore: registered new interface driver btusb [ 66.101991] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 66.101995] Bluetooth: BNEP filters: protocol multicast [ 66.776952] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned. [ 66.777265] input: HP WMI hotkeys as /devices/virtual/input/input7 [ 66.778002] Initializing Realtek PCIE storage driver... [ 66.778043] rts_pstor 0000:13:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 66.778385] Resource length: 0x1000 [ 66.778409] Original address: 0xc3500000, remapped address: 0xffffc9000113e000 [ 66.778417] pci->irq = 18 [ 66.778420] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 18 [ 66.778451] rts_pstor 0000:13:00.0: setting latency timer to 64 [ 66.857781] Linux video capture interface: v2.00 [ 66.858670] hp_accel: hardware type DV7 found [ 66.947972] uvcvideo: Found UVC 1.00 device HP TrueVision HD (064e:e258) [ 66.951540] input: HP TrueVision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input8 [ 66.951614] usbcore: registered new interface driver uvcvideo [ 66.951616] USB Video Class driver (1.1.1) [ 66.978796] scsi6 : SCSI emulation for PCI-Express Mass Storage devices [ 66.978952] rts_pstor: waiting for device to settle before scanning [ 67.205092] cfg80211: Calling CRDA to update world regulatory domain [ 67.426270] lis3lv02d: 8 bits 3DC sensor found [ 67.977394] rts_pstor: device scan complete [ 67.977616] scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS [ 67.977715] Bad LUN (0:1) [ 67.977841] Bad target number (1:0) [ 67.977961] Bad target number (2:0) [ 67.978082] Bad target number (3:0) [ 67.978200] Bad target number (4:0) [ 67.978292] Bad target number (5:0) [ 67.978355] Bad target number (6:0) [ 67.978393] Bad target number (7:0) [ 67.978580] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 67.978755] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 68.011309] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400 [ 68.056794] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9 [ 68.184946] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input10 [ 68.185124] Registered led device: hp::hddprotect [ 68.185142] hp_accel: driver loaded [ 68.755140] cfg80211: World regulatory domain updated: [ 68.755145] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 68.755149] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 68.755152] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 68.755156] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 68.755159] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 68.755162] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 68.844975] init: failsafe main process (1515) killed by TERM signal [ 68.962868] rt2800pci 0000:0d:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 68.962902] rt2800pci 0000:0d:00.0: setting latency timer to 64 [ 68.965216] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 68.965221] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 68.965224] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 68.965227] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 68.965230] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 68.965234] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 68.965237] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 68.965240] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 68.965243] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 68.965247] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 68.965249] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 68.965253] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 68.965256] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 68.965259] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 68.965262] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 68.965266] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 68.965269] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 68.965272] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 68.965275] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 68.965278] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 68.965281] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 68.965285] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 68.965288] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 68.965291] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 68.965294] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 68.965298] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 68.965300] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 68.965304] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 69.402811] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 69.403458] Registered led device: rt2800pci-phy0::radio [ 69.403486] Registered led device: rt2800pci-phy0::assoc [ 69.403512] Registered led device: rt2800pci-phy0::quality [ 70.431436] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 70.431502] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X [ 70.431532] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 70.900421] r8169 0000:07:00.0: eth0: link down [ 70.900933] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 70.901260] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 71.213407] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 71.213945] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 71.823717] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 71.823818] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 71.823927] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 71.824021] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 73.249836] init: hybrid-gfx main process (1774) terminated with status 127 [ 75.223336] init: alsa-restore main process (1756) terminated with status 99 [ 75.666495] lp: driver loaded but no devices found [ 75.999454] ppdev: user-space parallel port driver [ 201.166865] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 203.478163] Initializing USB Mass Storage driver... [ 203.478537] scsi7 : usb-storage 3-1:1.0 [ 203.478701] usbcore: registered new interface driver usb-storage [ 203.478705] USB Mass Storage support registered. [ 203.536000] usbcore: registered new interface driver uas [ 204.475327] scsi 7:0:0:0: Direct-Access OCZ ET1208AD 1.0 PQ: 0 ANSI: 2 [ 204.476863] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 204.477073] sd 7:0:0:0: [sdc] 8191999 512-byte logical blocks: (4.19 GB/3.90 GiB) [ 204.477320] sd 7:0:0:0: [sdc] Write Protect is off [ 204.477328] sd 7:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 204.477568] sd 7:0:0:0: [sdc] Asking for cache data failed [ 204.477578] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 204.481183] sd 7:0:0:0: [sdc] Asking for cache data failed [ 204.481195] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 204.533976] sdc: [ 204.535409] sd 7:0:0:0: [sdc] Asking for cache data failed [ 204.535417] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 204.535424] sd 7:0:0:0: [sdc] Attached SCSI removable disk [ 241.047600] wlan0: authenticate with 00:22:6b:ef:35:4e (try 1) [ 241.049737] wlan0: authenticated [ 241.067793] wlan0: associate with 00:22:6b:ef:35:4e (try 1) [ 241.071872] wlan0: RX AssocResp from 00:22:6b:ef:35:4e (capab=0x431 status=0 aid=1) [ 241.071882] wlan0: associated [ 241.073236] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 251.731446] wlan0: no IPv6 routers present [ 1775.498125] usb 3-2: new high-speed USB device number 3 using xhci_hcd [ 1775.565729] usb 3-2: ep 0x1 - rounding interval to 32768 microframes, ep desc says 0 microframes [ 1775.565741] usb 3-2: ep 0x82 - rounding interval to 32768 microframes, ep desc says 0 microframes [ 1775.566810] scsi8 : usb-storage 3-2:1.0 [ 1776.566960] scsi 8:0:0:0: Direct-Access OCZ RALLY2 8.07 PQ: 0 ANSI: 2 [ 1776.568580] sd 8:0:0:0: Attached scsi generic sg4 type 0 [ 1776.568867] sd 8:0:0:0: [sdd] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 1776.569046] sd 8:0:0:0: [sdd] Write Protect is off [ 1776.569054] sd 8:0:0:0: [sdd] Mode Sense: 03 00 00 00 [ 1776.569231] sd 8:0:0:0: [sdd] No Caching mode page present [ 1776.569241] sd 8:0:0:0: [sdd] Assuming drive cache: write through [ 1776.572260] sd 8:0:0:0: [sdd] No Caching mode page present [ 1776.572271] sd 8:0:0:0: [sdd] Assuming drive cache: write through [ 1776.920399] sdd: sdd1 sdd2 [ 1776.922036] sd 8:0:0:0: [sdd] No Caching mode page present [ 1776.922058] sd 8:0:0:0: [sdd] Assuming drive cache: write through [ 1776.922069] sd 8:0:0:0: [sdd] Attached SCSI removable disk [ 1781.662988] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null) ----------------------------------------------------------------------------------- 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) Subsystem: Hewlett-Packard Company Device [103c:1659] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: agpgart-intel 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [88] Subsystem: Hewlett-Packard Company Device [103c:1659] Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0f00c Data: 4169 Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #2, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Surprise- LLActRep- BwNot+ LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #1, PowerLimit 75.000W; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Capabilities: [140 v1] Root Complex Link Desc: PortNumber=02 ComponentID=01 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed19000 Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:1659] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- [disabled] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0c00c Data: 41b1 Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a4] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) Subsystem: Hewlett-Packard Company Device [103c:1659] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #0, PowerLimit 10.000W; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:1659] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #1, PowerLimit 10.000W; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:1659] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #2, PowerLimit 10.000W; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:1659] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #4, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #3, PowerLimit 10.000W; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis+ ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:1659] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:1659] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Kernel modules: iTCO_wdt 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Hewlett-Packard Company Device [103c:1659] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- Capabilities: [150 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap+ ChkEn- Kernel driver in use: radeon Kernel modules: radeon 07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) Subsystem: Hewlett-Packard Company Device [103c:1659] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort+ SERR- TAbort- SERR- TAbort- SERR-