[ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 100000000 mask FC0000000 write-back [ 0.000000] 2 base 0BB800000 mask FFF800000 uncachable [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 5 base 13F800000 mask FFF800000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 4GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3000MB, range: 8MB, type UC [ 0.000000] reg 3, base: 3008MB, range: 64MB, type UC [ 0.000000] reg 4, base: 3GB, range: 1GB, type UC [ 0.000000] reg 5, base: 5112MB, range: 8MB, type UC [ 0.000000] total RAM covered: 4016M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 6 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3000MB, range: 8MB, type UC [ 0.000000] reg 3, base: 3008MB, range: 64MB, type UC [ 0.000000] reg 4, base: 4GB, range: 1GB, type WB [ 0.000000] reg 5, base: 5112MB, range: 8MB, type UC [ 0.000000] e820 update range: 00000000bb800000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] found SMP MP-table at [c00fced0] fced0 [ 0.000000] initial memory mapped : 0 - 02000000 [ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037a00000 page 2M [ 0.000000] 0037a00000 - 0037bfe000 page 4k [ 0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000 [ 0.000000] RAMDISK: 365f0000 - 372f0000 [ 0.000000] ACPI: RSDP 000f0440 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT bac54070 0005C (v01 DELL AS09 01072009 AMI 00010013) [ 0.000000] ACPI: FACP bac5b050 000F4 (v04 DELL AS09 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT bac54158 06EF8 (v02 DELL AS09 00000000 INTL 20051117) [ 0.000000] ACPI: FACS bac86f80 00040 [ 0.000000] ACPI: APIC bac5b148 00072 (v03 DELL AS09 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT bac5b1c0 00102 (v01 DELL AS09 00000001 MSFT 03000001) [ 0.000000] ACPI: MCFG bac5b2c8 0003C (v01 DELL AS09 01072009 MSFT 00000097) [ 0.000000] ACPI: SLIC bac5b308 00176 (v01 DELL AS09 01072009 AMI 00010013) [ 0.000000] ACPI: HPET bac5b480 00038 (v01 DELL AS09 01072009 AMI. 00000004) [ 0.000000] ACPI: OSFR bac5b4b8 00082 (v01 DELL AS09 07DB050D ASL 00000061) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 4220MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00037bfe [ 0.000000] HighMem 0x00037bfe -> 0x0013f800 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[8] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x00020000 [ 0.000000] 0: 0x00020200 -> 0x00040000 [ 0.000000] 0: 0x00040200 -> 0x000bac0b [ 0.000000] 0: 0x000bac70 -> 0x000bac71 [ 0.000000] 0: 0x000bacf8 -> 0x000bae61 [ 0.000000] 0: 0x000baff7 -> 0x000bb000 [ 0.000000] 0: 0x00100000 -> 0x0013f800 [ 0.000000] On node 0 totalpages: 1024267 [ 0.000000] free_area_init_node: node 0, pgdat c17f4440, node_mem_map f3e00200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3949 pages, LIFO batch:0 [ 0.000000] Normal zone: 1752 pages used for memmap [ 0.000000] Normal zone: 221990 pages, LIFO batch:31 [ 0.000000] HighMem zone: 8441 pages used for memmap [ 0.000000] HighMem zone: 788103 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 [ 0.000000] Allocating PCI resources starting at bfa00000 (gap: bfa00000:3f31c000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f7800000 s29952 r0 d23296 u524288 [ 0.000000] pcpu-alloc: s29952 r0 d23296 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1014042 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-15-generic-pae root=UUID=5836c603-4741-4bf2-ba1b-85382b9f0769 ro nomodeset initcall_debug vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] allocated 20938496 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00037bfe:0013f800) [ 0.000000] Memory: 4011452k/5234688k available (5523k kernel code, 85616k reserved, 2666k data, 720k init, 3186176k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) [ 0.000000] .init : 0xc1800000 - 0xc18b4000 ( 720 kB) [ 0.000000] .data : 0xc1564dfc - 0xc17ff780 (2666 kB) [ 0.000000] .text : 0xc1000000 - 0xc1564dfc (5523 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f740a000 soft=f740c000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 3092.678 MHz processor. [ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.35 BogoMIPS (lpj=12370712) [ 0.000004] pid_max: default: 32768 minimum: 301 [ 0.000017] Security Framework initialized [ 0.000025] AppArmor: AppArmor initialized [ 0.000027] Yama: becoming mindful. [ 0.000056] Mount-cache hash table entries: 512 [ 0.000127] Initializing cgroup subsys cpuacct [ 0.000131] Initializing cgroup subsys memory [ 0.000135] Initializing cgroup subsys devices [ 0.000137] Initializing cgroup subsys freezer [ 0.000138] Initializing cgroup subsys net_cls [ 0.000139] Initializing cgroup subsys blkio [ 0.000143] Initializing cgroup subsys perf_event [ 0.000163] CPU: Physical Processor ID: 0 [ 0.000164] CPU: Processor Core ID: 0 [ 0.000177] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.000177] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.000180] mce: CPU supports 7 MCE banks [ 0.000189] CPU0: Thermal monitoring enabled (TM1) [ 0.000194] using mwait in idle threads. [ 0.001800] ACPI: Core revision 20110413 [ 0.004901] ftrace: allocating 25655 entries in 51 pages [ 0.012042] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.012413] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.052084] CPU0: Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz stepping 07 [ 0.156138] calling trace_init_flags_sys_exit+0x0/0x11 @ 1 [ 0.156141] initcall trace_init_flags_sys_exit+0x0/0x11 returned 0 after 0 usecs [ 0.156143] calling trace_init_flags_sys_enter+0x0/0x11 @ 1 [ 0.156145] initcall trace_init_flags_sys_enter+0x0/0x11 returned 0 after 0 usecs [ 0.156147] calling init_hw_perf_events+0x0/0x7b @ 1 [ 0.156148] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver. [ 0.156153] ... version: 3 [ 0.156154] ... bit width: 48 [ 0.156155] ... generic registers: 4 [ 0.156156] ... value mask: 0000ffffffffffff [ 0.156157] ... max period: 000000007fffffff [ 0.156158] ... fixed-purpose events: 3 [ 0.156159] ... event mask: 000000070000000f [ 0.156167] initcall init_hw_perf_events+0x0/0x7b returned 0 after 0 usecs [ 0.156170] calling migration_init+0x0/0x59 @ 1 [ 0.156172] initcall migration_init+0x0/0x59 returned 0 after 0 usecs [ 0.156173] calling spawn_ksoftirqd+0x0/0x41 @ 1 [ 0.156185] initcall spawn_ksoftirqd+0x0/0x41 returned 0 after 0 usecs [ 0.156186] calling init_workqueues+0x0/0x277 @ 1 [ 0.156215] initcall init_workqueues+0x0/0x277 returned 0 after 0 usecs [ 0.156217] calling jump_label_init_module+0x0/0xf @ 1 [ 0.156219] initcall jump_label_init_module+0x0/0xf returned 0 after 0 usecs [ 0.156221] calling jump_label_init+0x0/0x7c @ 1 [ 0.156363] initcall jump_label_init+0x0/0x7c returned 0 after 0 usecs [ 0.156365] calling cpu_stop_init+0x0/0x7f @ 1 [ 0.156376] initcall cpu_stop_init+0x0/0x7f returned 0 after 0 usecs [ 0.156378] calling rcu_scheduler_really_started+0x0/0x11 @ 1 [ 0.156380] initcall rcu_scheduler_really_started+0x0/0x11 returned 0 after 0 usecs [ 0.156382] calling relay_init+0x0/0x11 @ 1 [ 0.156384] initcall relay_init+0x0/0x11 returned 0 after 0 usecs [ 0.156386] calling tracer_alloc_buffers+0x0/0x180 @ 1 [ 0.156398] initcall tracer_alloc_buffers+0x0/0x180 returned 0 after 0 usecs [ 0.156400] calling init_trace_printk+0x0/0xf @ 1 [ 0.156402] initcall init_trace_printk+0x0/0xf returned 0 after 0 usecs [ 0.156444] CPU 1 irqstacks, hard=f74cc000 soft=f74ce000 [ 0.156446] Booting Node 0, Processors #1 [ 0.156447] smpboot cpu 1: start_ip = 99000 [ 0.166645] Initializing CPU#1 [ 0.264220] CPU 2 irqstacks, hard=f74e0000 soft=f74e2000 [ 0.264221] #2 [ 0.264222] smpboot cpu 2: start_ip = 99000 [ 0.274449] Initializing CPU#2 [ 0.372182] CPU 3 irqstacks, hard=f74f0000 soft=f74f2000 [ 0.372184] #3 Ok. [ 0.372185] smpboot cpu 3: start_ip = 99000 [ 0.382382] Initializing CPU#3 [ 0.480107] Brought up 4 CPUs [ 0.480109] Total of 4 processors activated (24743.07 BogoMIPS). [ 0.482182] devtmpfs: initialized [ 0.482263] calling init_mmap_min_addr+0x0/0x11 @ 1 [ 0.482265] initcall init_mmap_min_addr+0x0/0x11 returned 0 after 0 usecs [ 0.482269] calling init_cpufreq_transition_notifier_list+0x0/0x18 @ 1 [ 0.482272] initcall init_cpufreq_transition_notifier_list+0x0/0x18 returned 0 after 0 usecs [ 0.482274] calling net_ns_init+0x0/0x102 @ 1 [ 0.482291] initcall net_ns_init+0x0/0x102 returned 0 after 0 usecs [ 0.482294] calling e820_mark_nvs_memory+0x0/0x2f @ 1 [ 0.482295] PM: Registering ACPI NVS region at bac0b000 (299008 bytes) [ 0.482302] PM: Registering ACPI NVS region at bac81000 (65536 bytes) [ 0.482304] PM: Registering ACPI NVS region at bacb5000 (274432 bytes) [ 0.482310] initcall e820_mark_nvs_memory+0x0/0x2f returned 0 after 0 usecs [ 0.482312] calling cpufreq_tsc+0x0/0x26 @ 1 [ 0.482314] initcall cpufreq_tsc+0x0/0x26 returned 0 after 0 usecs [ 0.482316] calling pci_reboot_init+0x0/0x11 @ 1 [ 0.482322] initcall pci_reboot_init+0x0/0x11 returned 0 after 0 usecs [ 0.482324] calling reboot_init+0x0/0x11 @ 1 [ 0.482333] initcall reboot_init+0x0/0x11 returned 0 after 0 usecs [ 0.482335] calling init_lapic_sysfs+0x0/0x1b @ 1 [ 0.482337] initcall init_lapic_sysfs+0x0/0x1b returned 0 after 0 usecs [ 0.482340] calling init_smp_flush+0x0/0x66 @ 1 [ 0.482343] initcall init_smp_flush+0x0/0x66 returned 0 after 0 usecs [ 0.482345] calling alloc_frozen_cpus+0x0/0x10 @ 1 [ 0.482347] initcall alloc_frozen_cpus+0x0/0x10 returned 0 after 0 usecs [ 0.482349] calling sysctl_init+0x0/0x29 @ 1 [ 0.482386] initcall sysctl_init+0x0/0x29 returned 0 after 0 usecs [ 0.482388] calling ksysfs_init+0x0/0x74 @ 1 [ 0.482393] initcall ksysfs_init+0x0/0x74 returned 0 after 0 usecs [ 0.482395] calling init_jiffies_clocksource+0x0/0xf @ 1 [ 0.482397] initcall init_jiffies_clocksource+0x0/0xf returned 0 after 0 usecs [ 0.482399] calling pm_init+0x0/0x67 @ 1 [ 0.482405] initcall pm_init+0x0/0x67 returned 0 after 0 usecs [ 0.482407] calling pm_disk_init+0x0/0x14 @ 1 [ 0.482410] initcall pm_disk_init+0x0/0x14 returned 0 after 0 usecs [ 0.482412] calling swsusp_header_init+0x0/0x30 @ 1 [ 0.482414] initcall swsusp_header_init+0x0/0x30 returned 0 after 0 usecs [ 0.482416] calling init_seccomp_filter+0x0/0x6b @ 1 [ 0.482978] initcall init_seccomp_filter+0x0/0x6b returned 0 after 0 usecs [ 0.482981] calling init_ftrace_syscalls+0x0/0x6f @ 1 [ 0.483526] initcall init_ftrace_syscalls+0x0/0x6f returned 0 after 0 usecs [ 0.483528] calling init_zero_pfn+0x0/0x14 @ 1 [ 0.483530] initcall init_zero_pfn+0x0/0x14 returned 0 after 0 usecs [ 0.483532] calling fsnotify_init+0x0/0x22 @ 1 [ 0.483534] initcall fsnotify_init+0x0/0x22 returned 0 after 0 usecs [ 0.483536] calling filelock_init+0x0/0x2f @ 1 [ 0.483539] initcall filelock_init+0x0/0x2f returned 0 after 0 usecs [ 0.483541] calling init_script_binfmt+0x0/0x11 @ 1 [ 0.483543] initcall init_script_binfmt+0x0/0x11 returned 0 after 0 usecs [ 0.483545] calling init_elf_binfmt+0x0/0x11 @ 1 [ 0.483547] initcall init_elf_binfmt+0x0/0x11 returned 0 after 0 usecs [ 0.483549] calling debugfs_init+0x0/0x4a @ 1 [ 0.483552] initcall debugfs_init+0x0/0x4a returned 0 after 0 usecs [ 0.483554] calling securityfs_init+0x0/0x41 @ 1 [ 0.483557] initcall securityfs_init+0x0/0x41 returned 0 after 0 usecs [ 0.483558] calling random32_init+0x0/0xa7 @ 1 [ 0.483561] initcall random32_init+0x0/0xa7 returned 0 after 0 usecs [ 0.483563] calling sfi_sysfs_init+0x0/0xba @ 1 [ 0.483565] initcall sfi_sysfs_init+0x0/0xba returned 0 after 0 usecs [ 0.483569] calling virtio_init+0x0/0x30 @ 1 [ 0.483576] initcall virtio_init+0x0/0x30 returned 0 after 0 usecs [ 0.483579] calling __gnttab_init+0x0/0x1f @ 1 [ 0.483581] initcall __gnttab_init+0x0/0x1f returned -19 after 0 usecs [ 0.483583] calling regulator_init+0x0/0x5e @ 1 [ 0.483611] print_constraints: dummy: [ 0.483616] initcall regulator_init+0x0/0x5e returned 0 after 0 usecs [ 0.483618] calling early_resume_init+0x0/0x20 @ 1 [ 0.483654] Time: 21:20:37 Date: 02/06/12 [ 0.483656] initcall early_resume_init+0x0/0x20 returned 0 after 0 usecs [ 0.483658] calling cpufreq_core_init+0x0/0x7e @ 1 [ 0.483661] initcall cpufreq_core_init+0x0/0x7e returned 0 after 0 usecs [ 0.483663] calling cpuidle_init+0x0/0x32 @ 1 [ 0.483667] initcall cpuidle_init+0x0/0x32 returned 0 after 0 usecs [ 0.483669] calling sock_init+0x0/0x78 @ 1 [ 0.483686] initcall sock_init+0x0/0x78 returned 0 after 0 usecs [ 0.483687] calling net_inuse_init+0x0/0x22 @ 1 [ 0.483691] initcall net_inuse_init+0x0/0x22 returned 0 after 0 usecs [ 0.483692] calling netpoll_init+0x0/0x2f @ 1 [ 0.483694] initcall netpoll_init+0x0/0x2f returned 0 after 0 usecs [ 0.483696] calling netlink_proto_init+0x0/0x20 @ 1 [ 0.483700] NET: Registered protocol family 16 [ 0.483706] initcall netlink_proto_init+0x0/0x20 returned 0 after 0 usecs [ 0.483708] calling populate_rootfs_early+0x0/0x36 @ 1 [ 0.483712] initcall populate_rootfs_early+0x0/0x36 returned 1 after 0 usecs [ 0.483715] initcall populate_rootfs_early+0x0/0x36 returned with error code 1 [ 0.483718] calling bdi_class_init+0x0/0x3c @ 1 [ 0.483726] initcall bdi_class_init+0x0/0x3c returned 0 after 0 usecs [ 0.483728] calling kobject_uevent_init+0x0/0x1e @ 1 [ 0.483733] calling 1_async_populate_rootfs+0x0/0x30 @ 5 [ 0.483735] initcall kobject_uevent_init+0x0/0x1e returned 0 after 0 usecs [ 0.483737] calling gpiolib_sysfs_init+0x0/0x74 @ 1 [ 0.483744] initcall gpiolib_sysfs_init+0x0/0x74 returned 0 after 0 usecs [ 0.483745] calling pcibus_class_init+0x0/0x14 @ 1 [ 0.483749] initcall pcibus_class_init+0x0/0x14 returned 0 after 0 usecs [ 0.483751] calling pci_driver_init+0x0/0xf @ 1 [ 0.483757] initcall pci_driver_init+0x0/0xf returned 0 after 0 usecs [ 0.483759] calling rio_bus_init+0x0/0x2a @ 1 [ 0.483768] initcall rio_bus_init+0x0/0x2a returned 0 after 0 usecs [ 0.483769] calling backlight_class_init+0x0/0x53 @ 1 [ 0.483773] initcall backlight_class_init+0x0/0x53 returned 0 after 0 usecs [ 0.483776] calling xenbus_init+0x0/0x212 @ 1 [ 0.483778] initcall xenbus_init+0x0/0x212 returned -19 after 0 usecs [ 0.483779] Trying to unpack rootfs image as initramfs... [ 0.483781] calling tty_class_init+0x0/0x2b @ 1 [ 0.483785] initcall tty_class_init+0x0/0x2b returned 0 after 0 usecs [ 0.483786] calling vtconsole_class_init+0x0/0xc9 @ 1 [ 0.483798] initcall vtconsole_class_init+0x0/0xc9 returned 0 after 0 usecs [ 0.483800] calling wakeup_sources_debugfs_init+0x0/0x2f @ 1 [ 0.483803] initcall wakeup_sources_debugfs_init+0x0/0x2f returned 0 after 0 usecs [ 0.483805] calling spi_init+0x0/0x7e @ 1 [ 0.483813] initcall spi_init+0x0/0x7e returned 0 after 0 usecs [ 0.483815] calling i2c_init+0x0/0x59 @ 1 [ 0.483825] initcall i2c_init+0x0/0x59 returned 0 after 0 usecs [ 0.483827] calling eisa_init+0x0/0x27 @ 1 [ 0.483831] EISA bus registered [ 0.483833] initcall eisa_init+0x0/0x27 returned 0 after 0 usecs [ 0.483835] calling amd_postcore_init+0x0/0x74 @ 1 [ 0.483837] initcall amd_postcore_init+0x0/0x74 returned 0 after 0 usecs [ 0.483839] calling arch_kdebugfs_init+0x0/0x1e @ 1 [ 0.483842] initcall arch_kdebugfs_init+0x0/0x1e returned 0 after 0 usecs [ 0.483844] calling init_pit_clocksource+0x0/0x3a @ 1 [ 0.483846] initcall init_pit_clocksource+0x0/0x3a returned 0 after 0 usecs [ 0.483848] calling configure_trampolines+0x0/0x1f @ 1 [ 0.483856] initcall configure_trampolines+0x0/0x1f returned 0 after 0 usecs [ 0.483859] calling mtrr_if_init+0x0/0x56 @ 1 [ 0.483861] initcall mtrr_if_init+0x0/0x56 returned 0 after 0 usecs [ 0.483863] calling ffh_cstate_init+0x0/0x27 @ 1 [ 0.483866] initcall ffh_cstate_init+0x0/0x27 returned 0 after 0 usecs [ 0.483868] calling kdump_buf_page_init+0x0/0x45 @ 1 [ 0.483870] initcall kdump_buf_page_init+0x0/0x45 returned 0 after 0 usecs [ 0.483872] calling acpi_pci_init+0x0/0x59 @ 1 [ 0.483873] ACPI: bus type pci registered [ 0.483875] initcall acpi_pci_init+0x0/0x59 returned 0 after 0 usecs [ 0.483877] calling dma_bus_init+0x0/0x32 @ 1 [ 0.483881] initcall dma_bus_init+0x0/0x32 returned 0 after 0 usecs [ 0.483884] calling dma_channel_table_init+0x0/0xe6 @ 1 [ 0.483892] initcall dma_channel_table_init+0x0/0xe6 returned 0 after 0 usecs [ 0.483894] calling setup_vcpu_hotplug_event+0x0/0x1f @ 1 [ 0.483895] initcall setup_vcpu_hotplug_event+0x0/0x1f returned -19 after 0 usecs [ 0.483897] calling register_xen_pci_notifier+0x0/0x2b @ 1 [ 0.483898] initcall register_xen_pci_notifier+0x0/0x2b returned 0 after 0 usecs [ 0.483900] calling dmi_id_init+0x0/0xb1 @ 1 [ 0.483919] initcall dmi_id_init+0x0/0xb1 returned 0 after 0 usecs [ 0.483921] calling pci_arch_init+0x0/0x63 @ 1 [ 0.483932] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.483934] PCI: not using MMCONFIG [ 0.498305] PCI: Using configuration type 1 for base access [ 0.498314] initcall pci_arch_init+0x0/0x63 returned 0 after 15625 usecs [ 0.498317] calling topology_init+0x0/0x36 @ 1 [ 0.498335] initcall topology_init+0x0/0x36 returned 0 after 0 usecs [ 0.498338] calling mtrr_init_finialize+0x0/0x30 @ 1 [ 0.498340] initcall mtrr_init_finialize+0x0/0x30 returned 0 after 0 usecs [ 0.498342] calling mca_init+0x0/0x32e @ 1 [ 0.498349] initcall mca_init+0x0/0x32e returned -19 after 0 usecs [ 0.498352] calling param_sysfs_init+0x0/0x4a @ 1 [ 0.498830] initcall param_sysfs_init+0x0/0x4a returned 0 after 0 usecs [ 0.498832] calling pm_sysrq_init+0x0/0x20 @ 1 [ 0.498834] initcall pm_sysrq_init+0x0/0x20 returned 0 after 0 usecs [ 0.498837] calling default_bdi_init+0x0/0xaa @ 1 [ 0.498906] initcall default_bdi_init+0x0/0xaa returned 0 after 0 usecs [ 0.498909] calling init_bio+0x0/0x101 @ 1 [ 0.498933] bio: create slab at 0 [ 0.498938] initcall init_bio+0x0/0x101 returned 0 after 0 usecs [ 0.498940] calling fsnotify_notification_init+0x0/0x9c @ 1 [ 0.498945] initcall fsnotify_notification_init+0x0/0x9c returned 0 after 0 usecs [ 0.498948] calling cryptomgr_init+0x0/0xf @ 1 [ 0.498950] initcall cryptomgr_init+0x0/0xf returned 0 after 0 usecs [ 0.498952] calling blk_settings_init+0x0/0x1d @ 1 [ 0.498954] initcall blk_settings_init+0x0/0x1d returned 0 after 0 usecs [ 0.498956] calling blk_ioc_init+0x0/0x2f @ 1 [ 0.498959] initcall blk_ioc_init+0x0/0x2f returned 0 after 0 usecs [ 0.498961] calling blk_softirq_init+0x0/0x54 @ 1 [ 0.498964] initcall blk_softirq_init+0x0/0x54 returned 0 after 0 usecs [ 0.498966] calling blk_iopoll_setup+0x0/0x54 @ 1 [ 0.498968] initcall blk_iopoll_setup+0x0/0x54 returned 0 after 0 usecs [ 0.498970] calling genhd_device_init+0x0/0x61 @ 1 [ 0.498996] initcall genhd_device_init+0x0/0x61 returned 0 after 0 usecs [ 0.498999] calling blk_dev_integrity_init+0x0/0x2f @ 1 [ 0.499001] initcall blk_dev_integrity_init+0x0/0x2f returned 0 after 0 usecs [ 0.499003] calling gpiolib_debugfs_init+0x0/0x2a @ 1 [ 0.499006] initcall gpiolib_debugfs_init+0x0/0x2a returned 0 after 0 usecs [ 0.499008] calling stmpe_gpio_init+0x0/0xf @ 1 [ 0.499015] initcall stmpe_gpio_init+0x0/0xf returned 0 after 0 usecs [ 0.499016] calling tc3589x_gpio_init+0x0/0xf @ 1 [ 0.499021] initcall tc3589x_gpio_init+0x0/0xf returned 0 after 0 usecs [ 0.499022] calling sx150x_init+0x0/0x11 @ 1 [ 0.499027] initcall sx150x_init+0x0/0x11 returned 0 after 0 usecs [ 0.499031] calling pci_slot_init+0x0/0x50 @ 1 [ 0.499034] initcall pci_slot_init+0x0/0x50 returned 0 after 0 usecs [ 0.499036] calling fbmem_init+0x0/0x96 @ 1 [ 0.499044] initcall fbmem_init+0x0/0x96 returned 0 after 0 usecs [ 0.499046] calling acpi_init+0x0/0xb2 @ 1 [ 0.499946] ACPI: EC: Look up EC in DSDT [ 0.500808] ACPI: Executed 1 blocks of module-level executable AML code [ 0.502913] ACPI: SSDT bac85c18 0038C (v01 AMI IST 00000001 MSFT 03000001) [ 0.503170] ACPI: Dynamic OEM Table Load: [ 0.503173] ACPI: SSDT (null) 0038C (v01 AMI IST 00000001 MSFT 03000001) [ 0.503190] ACPI: SSDT bac86e18 00084 (v01 AMI CST 00000001 MSFT 03000001) [ 0.503406] ACPI: Dynamic OEM Table Load: [ 0.503407] ACPI: SSDT (null) 00084 (v01 AMI CST 00000001 MSFT 03000001) [ 0.503778] ACPI: Interpreter enabled [ 0.503781] ACPI: (supports S0 S3 S4 S5) [ 0.503793] ACPI: Using IOAPIC for interrupt routing [ 0.503809] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.503856] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources [ 0.503858] PCI: Using MMCONFIG for extended config space [ 0.504044] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.506307] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.506922] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.506937] initcall acpi_init+0x0/0xb2 returned 0 after 7812 usecs [ 0.506939] calling dock_init+0x0/0xb3 @ 1 [ 0.507033] ACPI: No dock devices found. [ 0.507034] initcall dock_init+0x0/0xb3 returned 0 after 0 usecs [ 0.507036] calling acpi_pci_root_init+0x0/0x2a @ 1 [ 0.507038] HEST: Table not found. [ 0.507040] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.507203] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.507367] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] [ 0.507368] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] [ 0.507370] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df] [ 0.507372] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.507373] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.507375] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.507376] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xffffffff] [ 0.507386] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600 [ 0.507414] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604 [ 0.507434] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.507437] pci 0000:00:01.0: PME# disabled [ 0.507453] pci 0000:00:02.0: [8086:0102] type 0 class 0x000300 [ 0.507461] pci 0000:00:02.0: reg 10: [mem 0xfe000000-0xfe3fffff 64bit] [ 0.507467] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.507470] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f] [ 0.507515] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780 [ 0.507538] pci 0000:00:16.0: reg 10: [mem 0xfe508000-0xfe50800f 64bit] [ 0.507598] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.507602] pci 0000:00:16.0: PME# disabled [ 0.507632] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03 [ 0.507652] pci 0000:00:1a.0: reg 10: [mem 0xfe507000-0xfe5073ff] [ 0.507722] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.507726] pci 0000:00:1a.0: PME# disabled [ 0.507749] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403 [ 0.507763] pci 0000:00:1b.0: reg 10: [mem 0xfe500000-0xfe503fff 64bit] [ 0.507816] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.507819] pci 0000:00:1b.0: PME# disabled [ 0.507838] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604 [ 0.507898] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.507902] pci 0000:00:1c.0: PME# disabled [ 0.507924] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604 [ 0.507983] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.507987] pci 0000:00:1c.2: PME# disabled [ 0.508008] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604 [ 0.508072] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.508075] pci 0000:00:1c.3: PME# disabled [ 0.508097] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604 [ 0.508157] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.508161] pci 0000:00:1c.5: PME# disabled [ 0.508189] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03 [ 0.508209] pci 0000:00:1d.0: reg 10: [mem 0xfe506000-0xfe5063ff] [ 0.508279] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.508283] pci 0000:00:1d.0: PME# disabled [ 0.508306] pci 0000:00:1f.0: [8086:1c5c] type 0 class 0x000601 [ 0.508416] pci 0000:00:1f.2: [8086:1c02] type 0 class 0x000106 [ 0.508433] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7] [ 0.508441] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3] [ 0.508448] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097] [ 0.508456] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083] [ 0.508463] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f] [ 0.508471] pci 0000:00:1f.2: reg 24: [mem 0xfe505000-0xfe5057ff] [ 0.508502] pci 0000:00:1f.2: PME# supported from D3hot [ 0.508506] pci 0000:00:1f.2: PME# disabled [ 0.508522] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05 [ 0.508536] pci 0000:00:1f.3: reg 10: [mem 0xfe504000-0xfe5040ff 64bit] [ 0.508556] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f] [ 0.508597] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.508600] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.508602] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.508605] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.508647] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.508651] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.508655] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.508661] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.508724] pci 0000:03:00.0: [168c:002b] type 0 class 0x000280 [ 0.508750] pci 0000:03:00.0: reg 10: [mem 0xfe400000-0xfe40ffff 64bit] [ 0.508850] pci 0000:03:00.0: supports D1 [ 0.508851] pci 0000:03:00.0: PME# supported from D0 D1 D3hot [ 0.508857] pci 0000:03:00.0: PME# disabled [ 0.516070] pci 0000:00:1c.2: PCI bridge to [bus 03-03] [ 0.516075] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled) [ 0.516079] pci 0000:00:1c.2: bridge window [mem 0xfe400000-0xfe4fffff] [ 0.516085] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.516129] pci 0000:00:1c.3: PCI bridge to [bus 04-04] [ 0.516132] pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled) [ 0.516136] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.516142] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.516205] pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200 [ 0.516227] pci 0000:05:00.0: reg 10: [io 0xe000-0xe0ff] [ 0.516260] pci 0000:05:00.0: reg 18: [mem 0xe0004000-0xe0004fff 64bit pref] [ 0.516281] pci 0000:05:00.0: reg 20: [mem 0xe0000000-0xe0003fff 64bit pref] [ 0.516340] pci 0000:05:00.0: supports D1 D2 [ 0.516341] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.516347] pci 0000:05:00.0: PME# disabled [ 0.524068] pci 0000:00:1c.5: PCI bridge to [bus 05-05] [ 0.524072] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff] [ 0.524076] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.524082] pci 0000:00:1c.5: bridge window [mem 0xe0000000-0xe00fffff 64bit pref] [ 0.524105] pci_bus 0000:00: on NUMA node 0 [ 0.524109] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.524211] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.524235] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 0.524256] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 0.524279] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] [ 0.524306] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.524394] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.524486] pci0000:00: ACPI _OSC control (0x1d) granted [ 0.526935] initcall acpi_pci_root_init+0x0/0x2a returned 0 after 19532 usecs [ 0.526938] calling acpi_pci_link_init+0x0/0x3a @ 1 [ 0.526966] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.526999] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.527030] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.527060] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.527090] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 0.527121] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 0.527152] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.527183] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.527202] initcall acpi_pci_link_init+0x0/0x3a returned 0 after 0 usecs [ 0.527204] calling pnp_init+0x0/0xf @ 1 [ 0.527213] initcall pnp_init+0x0/0xf returned 0 after 0 usecs [ 0.527216] calling xen_setup_shutdown_event+0x0/0x30 @ 1 [ 0.527218] initcall xen_setup_shutdown_event+0x0/0x30 returned -19 after 0 usecs [ 0.527220] calling balloon_init+0x0/0x18 @ 1 [ 0.527222] initcall balloon_init+0x0/0x18 returned -19 after 0 usecs [ 0.527225] calling xenbus_probe_backend_init+0x0/0x23 @ 1 [ 0.527231] initcall xenbus_probe_backend_init+0x0/0x23 returned 0 after 0 usecs [ 0.527234] calling xenbus_probe_frontend_init+0x0/0x23 @ 1 [ 0.527240] initcall xenbus_probe_frontend_init+0x0/0x23 returned 0 after 0 usecs [ 0.527241] calling balloon_init+0x0/0x45 @ 1 [ 0.527243] initcall balloon_init+0x0/0x45 returned -19 after 0 usecs [ 0.527245] calling pm8607_regulator_init+0x0/0xf @ 1 [ 0.527250] initcall pm8607_regulator_init+0x0/0xf returned 0 after 0 usecs [ 0.527252] calling ab8500_regulator_init+0x0/0x2e @ 1 [ 0.527257] initcall ab8500_regulator_init+0x0/0x2e returned 0 after 0 usecs [ 0.527259] calling misc_init+0x0/0xad @ 1 [ 0.527267] initcall misc_init+0x0/0xad returned 0 after 0 usecs [ 0.527269] calling vga_arb_device_init+0x0/0xd3 @ 1 [ 0.527290] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.527295] vgaarb: loaded [ 0.527296] vgaarb: bridge control possible 0000:00:02.0 [ 0.527298] initcall vga_arb_device_init+0x0/0xd3 returned 0 after 0 usecs [ 0.527301] calling cn_init+0x0/0x98 @ 1 [ 0.527307] initcall cn_init+0x0/0x98 returned 0 after 0 usecs [ 0.527309] calling pm860x_i2c_init+0x0/0x30 @ 1 [ 0.527315] initcall pm860x_i2c_init+0x0/0x30 returned 0 after 0 usecs [ 0.527316] calling stmpe_init+0x0/0x11 @ 1 [ 0.527321] initcall stmpe_init+0x0/0x11 returned 0 after 0 usecs [ 0.527323] calling tc3589x_init+0x0/0x11 @ 1 [ 0.527328] initcall tc3589x_init+0x0/0x11 returned 0 after 0 usecs [ 0.527329] calling wm831x_i2c_init+0x0/0x30 @ 1 [ 0.527334] initcall wm831x_i2c_init+0x0/0x30 returned 0 after 0 usecs [ 0.527336] calling wm831x_spi_init+0x0/0xdc @ 1 [ 0.527359] initcall wm831x_spi_init+0x0/0xdc returned 0 after 0 usecs [ 0.527360] calling wm8350_i2c_init+0x0/0x11 @ 1 [ 0.527366] initcall wm8350_i2c_init+0x0/0x11 returned 0 after 0 usecs [ 0.527368] calling da903x_init+0x0/0x11 @ 1 [ 0.527373] initcall da903x_init+0x0/0x11 returned 0 after 0 usecs [ 0.527374] calling max8925_i2c_init+0x0/0x30 @ 1 [ 0.527379] initcall max8925_i2c_init+0x0/0x30 returned 0 after 0 usecs [ 0.527381] calling max8997_i2c_init+0x0/0x11 @ 1 [ 0.527386] initcall max8997_i2c_init+0x0/0x11 returned 0 after 0 usecs [ 0.527387] calling max8998_i2c_init+0x0/0x11 @ 1 [ 0.527392] initcall max8998_i2c_init+0x0/0x11 returned 0 after 0 usecs [ 0.527394] calling ab3100_i2c_init+0x0/0x11 @ 1 [ 0.527399] initcall ab3100_i2c_init+0x0/0x11 returned 0 after 0 usecs [ 0.527400] calling ab3550_i2c_init+0x0/0x11 @ 1 [ 0.527405] initcall ab3550_i2c_init+0x0/0x11 returned 0 after 0 usecs [ 0.527407] calling ab8500_sysctrl_init+0x0/0xf @ 1 [ 0.527412] initcall ab8500_sysctrl_init+0x0/0xf returned 0 after 0 usecs [ 0.527414] calling ab8500_debug_init+0x0/0xf @ 1 [ 0.527419] initcall ab8500_debug_init+0x0/0xf returned 0 after 0 usecs [ 0.527421] calling tps6586x_init+0x0/0x11 @ 1 [ 0.527426] initcall tps6586x_init+0x0/0x11 returned 0 after 0 usecs [ 0.527428] calling tps65910_i2c_init+0x0/0x11 @ 1 [ 0.527432] initcall tps65910_i2c_init+0x0/0x11 returned 0 after 0 usecs [ 0.527434] calling init_scsi+0x0/0x90 @ 1 [ 0.527483] SCSI subsystem initialized [ 0.527485] initcall init_scsi+0x0/0x90 returned 0 after 0 usecs [ 0.527487] calling ata_init+0x0/0x52 @ 1 [ 0.527528] libata version 3.00 loaded. [ 0.527531] initcall ata_init+0x0/0x52 returned 0 after 0 usecs [ 0.527533] calling phy_init+0x0/0x28 @ 1 [ 0.527545] initcall phy_init+0x0/0x28 returned 0 after 0 usecs [ 0.527547] calling usb_init+0x0/0x142 @ 1 [ 0.527568] usbcore: registered new interface driver usbfs [ 0.527575] usbcore: registered new interface driver hub [ 0.527593] usbcore: registered new device driver usb [ 0.527596] initcall usb_init+0x0/0x142 returned 0 after 0 usecs [ 0.527598] calling serio_init+0x0/0x2e @ 1 [ 0.527604] initcall serio_init+0x0/0x2e returned 0 after 0 usecs [ 0.527606] calling input_init+0x0/0x35 @ 1 [ 0.527613] initcall input_init+0x0/0x35 returned 0 after 0 usecs [ 0.527615] calling rtc_init+0x0/0x5f @ 1 [ 0.527620] initcall rtc_init+0x0/0x5f returned 0 after 0 usecs [ 0.527622] calling power_supply_class_init+0x0/0x35 @ 1 [ 0.527631] initcall power_supply_class_init+0x0/0x35 returned 0 after 0 usecs [ 0.527633] calling hwmon_init+0x0/0x3e @ 1 [ 0.527638] initcall hwmon_init+0x0/0x3e returned 0 after 0 usecs [ 0.527640] calling md_init+0x0/0x152 @ 1 [ 0.527662] initcall md_init+0x0/0x152 returned 0 after 0 usecs [ 0.527665] calling mmc_init+0x0/0x74 @ 1 [ 0.527681] initcall mmc_init+0x0/0x74 returned 0 after 0 usecs [ 0.527683] calling leds_init+0x0/0x39 @ 1 [ 0.527687] initcall leds_init+0x0/0x39 returned 0 after 0 usecs [ 0.527689] calling pci_subsys_init+0x0/0x44 @ 1 [ 0.527690] PCI: Using ACPI for IRQ routing [ 0.529113] PCI: pci_cache_line_size set to 64 bytes [ 0.529179] reserve RAM buffer: 000000000009d800 - 000000000009ffff [ 0.529181] reserve RAM buffer: 00000000bac0b000 - 00000000bbffffff [ 0.529184] reserve RAM buffer: 00000000bac71000 - 00000000bbffffff [ 0.529187] reserve RAM buffer: 00000000bae61000 - 00000000bbffffff [ 0.529189] reserve RAM buffer: 00000000bb000000 - 00000000bbffffff [ 0.529190] reserve RAM buffer: 000000013f800000 - 000000013fffffff [ 0.529193] initcall pci_subsys_init+0x0/0x44 returned 0 after 3906 usecs [ 0.529194] calling proto_init+0x0/0xf @ 1 [ 0.529198] initcall proto_init+0x0/0xf returned 0 after 0 usecs [ 0.529199] calling net_dev_init+0x0/0x1cf @ 1 [ 0.529251] initcall net_dev_init+0x0/0x1cf returned 0 after 0 usecs [ 0.529253] calling neigh_init+0x0/0x7a @ 1 [ 0.529255] initcall neigh_init+0x0/0x7a returned 0 after 0 usecs [ 0.529256] calling fib_rules_init+0x0/0xa2 @ 1 [ 0.529259] initcall fib_rules_init+0x0/0xa2 returned 0 after 0 usecs [ 0.529260] calling pktsched_init+0x0/0xe4 @ 1 [ 0.529264] initcall pktsched_init+0x0/0xe4 returned 0 after 0 usecs [ 0.529265] calling tc_filter_init+0x0/0x50 @ 1 [ 0.529267] initcall tc_filter_init+0x0/0x50 returned 0 after 0 usecs [ 0.529269] calling tc_action_init+0x0/0x50 @ 1 [ 0.529271] initcall tc_action_init+0x0/0x50 returned 0 after 0 usecs [ 0.529272] calling genl_init+0x0/0x7b @ 1 [ 0.529281] initcall genl_init+0x0/0x7b returned 0 after 0 usecs [ 0.529283] calling cipso_v4_init+0x0/0x59 @ 1 [ 0.529285] initcall cipso_v4_init+0x0/0x59 returned 0 after 0 usecs [ 0.529287] calling wireless_nlevent_init+0x0/0xf @ 1 [ 0.529290] initcall wireless_nlevent_init+0x0/0xf returned 0 after 0 usecs [ 0.529292] calling netlbl_init+0x0/0x7d @ 1 [ 0.529293] NetLabel: Initializing [ 0.529294] NetLabel: domain hash size = 128 [ 0.529294] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.529301] NetLabel: unlabeled traffic allowed by default [ 0.529303] initcall netlbl_init+0x0/0x7d returned 0 after 0 usecs [ 0.529305] calling rfkill_init+0x0/0x7f @ 1 [ 0.529325] initcall rfkill_init+0x0/0x7f returned 0 after 0 usecs [ 0.529327] calling sysctl_init+0x0/0x3b @ 1 [ 0.529329] initcall sysctl_init+0x0/0x3b returned 0 after 0 usecs [ 0.529331] calling ab8500_gpadc_init+0x0/0xf @ 1 [ 0.529337] initcall ab8500_gpadc_init+0x0/0xf returned 0 after 0 usecs [ 0.529340] calling print_ICs+0x0/0x89 @ 1 [ 0.529342] initcall print_ICs+0x0/0x89 returned 0 after 0 usecs [ 0.529344] calling hpet_late_init+0x0/0x44 @ 1 [ 0.529353] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.529357] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.531365] initcall hpet_late_init+0x0/0x44 returned 0 after 0 usecs [ 0.531367] calling init_amd_nbs+0x0/0x37 @ 1 [ 0.531375] initcall init_amd_nbs+0x0/0x37 returned 0 after 0 usecs [ 0.531377] calling clocksource_done_booting+0x0/0x4f @ 1 [ 0.531379] Switching to clocksource hpet [ 0.531602] initcall clocksource_done_booting+0x0/0x4f returned 0 after 2 usecs [ 0.531605] calling ftrace_init_debugfs+0x0/0xe4 @ 1 [ 0.531621] initcall ftrace_init_debugfs+0x0/0xe4 returned 0 after 12 usecs [ 0.531623] calling rb_init_debugfs+0x0/0x2f @ 1 [ 0.531629] initcall rb_init_debugfs+0x0/0x2f returned 0 after 2 usecs [ 0.531631] calling tracer_init_debugfs+0x0/0x298 @ 1 [ 0.531683] initcall tracer_init_debugfs+0x0/0x298 returned 0 after 47 usecs [ 0.531685] calling init_trace_printk_function_export+0x0/0x33 @ 1 [ 0.531691] initcall init_trace_printk_function_export+0x0/0x33 returned 0 after 1 usecs [ 0.531693] calling event_trace_init+0x0/0x192 @ 1 [ 0.532057] Switched to NOHz mode on CPU #0 [ 0.532100] Switched to NOHz mode on CPU #2 [ 0.532103] Switched to NOHz mode on CPU #3 [ 0.532116] Switched to NOHz mode on CPU #1 [ 0.535746] initcall event_trace_init+0x0/0x192 returned 0 after 3952 usecs [ 0.535749] calling init_kprobe_trace+0x0/0x79 @ 1 [ 0.535755] initcall init_kprobe_trace+0x0/0x79 returned 0 after 3 usecs [ 0.535758] calling init_pipe_fs+0x0/0x3d @ 1 [ 0.535771] initcall init_pipe_fs+0x0/0x3d returned 0 after 10 usecs [ 0.535774] calling eventpoll_init+0x0/0xef @ 1 [ 0.535783] initcall eventpoll_init+0x0/0xef returned 0 after 6 usecs [ 0.535785] calling anon_inode_init+0x0/0x71 @ 1 [ 0.535795] initcall anon_inode_init+0x0/0x71 returned 0 after 6 usecs [ 0.535798] calling tomoyo_initerface_init+0x0/0x21 @ 1 [ 0.535802] initcall tomoyo_initerface_init+0x0/0x21 returned 0 after 0 usecs [ 0.535804] calling aa_create_aafs+0x0/0x52 @ 1 [ 0.535815] AppArmor: AppArmor Filesystem Enabled [ 0.535819] initcall aa_create_aafs+0x0/0x52 returned 0 after 11 usecs [ 0.535822] calling blk_scsi_ioctl_init+0x0/0xc @ 1 [ 0.535827] initcall blk_scsi_ioctl_init+0x0/0xc returned 0 after 1 usecs [ 0.535830] calling acpi_event_init+0x0/0x76 @ 1 [ 0.535841] initcall acpi_event_init+0x0/0x76 returned 0 after 7 usecs [ 0.535843] calling pnp_system_init+0x0/0xf @ 1 [ 0.535856] initcall pnp_system_init+0x0/0xf returned 0 after 9 usecs [ 0.535858] calling pnpacpi_init+0x0/0x88 @ 1 [ 0.535860] pnp: PnP ACPI init [ 0.535870] ACPI: bus type pnp registered [ 0.535981] pnp 00:00: [bus 00-ff] [ 0.535983] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.535984] pnp 00:00: [io 0x0000-0x03af window] [ 0.535986] pnp 00:00: [io 0x03e0-0x0cf7 window] [ 0.535987] pnp 00:00: [io 0x03b0-0x03df window] [ 0.535988] pnp 00:00: [io 0x0d00-0xffff window] [ 0.535990] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.535991] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.535993] pnp 00:00: [mem 0xbfa00000-0xffffffff window] [ 0.535994] pnp 00:00: [mem 0x00000000 window] [ 0.536034] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.536074] pnp 00:01: [mem 0xfed10000-0xfed19fff] [ 0.536075] pnp 00:01: [mem 0xf0000000-0xf3ffffff] [ 0.536076] pnp 00:01: [mem 0xfed90000-0xfed93fff] [ 0.536078] pnp 00:01: [mem 0xfed20000-0xfed3ffff] [ 0.536079] pnp 00:01: [mem 0xfee00000-0xfee0ffff] [ 0.536105] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved [ 0.536107] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.536108] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.536110] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.536112] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved [ 0.536114] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.536138] pnp 00:02: [io 0x03f8-0x03ff] [ 0.536145] pnp 00:02: [irq 4] [ 0.536159] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.536166] pnp 00:03: [dma 4] [ 0.536167] pnp 00:03: [io 0x0000-0x000f] [ 0.536169] pnp 00:03: [io 0x0081-0x0083] [ 0.536170] pnp 00:03: [io 0x0087] [ 0.536171] pnp 00:03: [io 0x0089-0x008b] [ 0.536172] pnp 00:03: [io 0x008f] [ 0.536174] pnp 00:03: [io 0x00c0-0x00df] [ 0.536187] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.536193] pnp 00:04: [io 0x0070-0x0071] [ 0.536198] pnp 00:04: [irq 8] [ 0.536211] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.536216] pnp 00:05: [io 0x0061] [ 0.536230] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.536244] pnp 00:06: [io 0x0010-0x001f] [ 0.536245] pnp 00:06: [io 0x0022-0x003f] [ 0.536246] pnp 00:06: [io 0x0044-0x005f] [ 0.536247] pnp 00:06: [io 0x0062-0x0063] [ 0.536249] pnp 00:06: [io 0x0065-0x006f] [ 0.536250] pnp 00:06: [io 0x0072-0x007f] [ 0.536251] pnp 00:06: [io 0x0080] [ 0.536252] pnp 00:06: [io 0x0084-0x0086] [ 0.536253] pnp 00:06: [io 0x0088] [ 0.536254] pnp 00:06: [io 0x008c-0x008e] [ 0.536255] pnp 00:06: [io 0x0090-0x009f] [ 0.536256] pnp 00:06: [io 0x00a2-0x00bf] [ 0.536258] pnp 00:06: [io 0x00e0-0x00ef] [ 0.536259] pnp 00:06: [io 0x04d0-0x04d1] [ 0.536282] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.536284] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.536290] pnp 00:07: [io 0x00f0-0x00ff] [ 0.536294] pnp 00:07: [irq 13] [ 0.536307] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.536412] pnp 00:08: [io 0x0400-0x0453] [ 0.536413] pnp 00:08: [io 0x0458-0x047f] [ 0.536414] pnp 00:08: [io 0x1180-0x119f] [ 0.536416] pnp 00:08: [io 0x0500-0x057f] [ 0.536417] pnp 00:08: [mem 0xfed1c000-0xfed1ffff] [ 0.536418] pnp 00:08: [mem 0xfec00000-0xfecfffff] [ 0.536419] pnp 00:08: [mem 0xfed08000-0xfed08fff] [ 0.536421] pnp 00:08: [mem 0xff000000-0xffffffff] [ 0.536444] system 00:08: [io 0x0400-0x0453] has been reserved [ 0.536446] system 00:08: [io 0x0458-0x047f] has been reserved [ 0.536448] system 00:08: [io 0x1180-0x119f] has been reserved [ 0.536449] system 00:08: [io 0x0500-0x057f] has been reserved [ 0.536451] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.536453] system 00:08: [mem 0xfec00000-0xfecfffff] could not be reserved [ 0.536455] system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved [ 0.536457] system 00:08: [mem 0xff000000-0xffffffff] has been reserved [ 0.536458] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.536481] pnp 00:09: [io 0x0454-0x0457] [ 0.536503] system 00:09: [io 0x0454-0x0457] has been reserved [ 0.536505] system 00:09: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.536585] pnp 00:0a: [mem 0xfed00000-0xfed003ff] [ 0.536608] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.536706] pnp: PnP ACPI: found 11 devices [ 0.536707] ACPI: ACPI bus type pnp unregistered [ 0.536711] initcall pnpacpi_init+0x0/0x88 returned 0 after 829 usecs [ 0.536713] calling pnpbios_init+0x0/0xe8 @ 1 [ 0.536716] PnPBIOS: Disabled by ACPI PNP [ 0.536719] initcall pnpbios_init+0x0/0xe8 returned -19 after 3 usecs [ 0.536721] calling chr_dev_init+0x0/0x18 @ 1 [ 0.537548] initcall chr_dev_init+0x0/0x18 returned 0 after 803 usecs [ 0.537550] calling firmware_class_init+0x0/0x14 @ 1 [ 0.537558] initcall firmware_class_init+0x0/0x14 returned 0 after 4 usecs [ 0.537560] calling thermal_init+0x0/0x5f @ 1 [ 0.537570] initcall thermal_init+0x0/0x5f returned 0 after 5 usecs [ 0.537572] calling cpufreq_gov_performance_init+0x0/0xf @ 1 [ 0.537577] initcall cpufreq_gov_performance_init+0x0/0xf returned 0 after 1 usecs [ 0.537579] calling init_acpi_pm_clocksource+0x0/0x10d @ 1 [ 0.572080] initcall init_acpi_pm_clocksource+0x0/0x10d returned 0 after 33694 usecs [ 0.572083] calling pcibios_assign_resources+0x0/0x84 @ 1 [ 0.572095] PCI: max bus depth: 1 pci_try_num: 2 [ 0.572132] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.572134] pci 0000:00:01.0: bridge window [io disabled] [ 0.572136] pci 0000:00:01.0: bridge window [mem disabled] [ 0.572138] pci 0000:00:01.0: bridge window [mem pref disabled] [ 0.572141] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.572142] pci 0000:00:1c.0: bridge window [io disabled] [ 0.572146] pci 0000:00:1c.0: bridge window [mem disabled] [ 0.572150] pci 0000:00:1c.0: bridge window [mem pref disabled] [ 0.572156] pci 0000:00:1c.2: PCI bridge to [bus 03-03] [ 0.572157] pci 0000:00:1c.2: bridge window [io disabled] [ 0.572163] pci 0000:00:1c.2: bridge window [mem 0xfe400000-0xfe4fffff] [ 0.572167] pci 0000:00:1c.2: bridge window [mem pref disabled] [ 0.572172] pci 0000:00:1c.3: PCI bridge to [bus 04-04] [ 0.572174] pci 0000:00:1c.3: bridge window [io disabled] [ 0.572178] pci 0000:00:1c.3: bridge window [mem disabled] [ 0.572182] pci 0000:00:1c.3: bridge window [mem pref disabled] [ 0.572188] pci 0000:00:1c.5: PCI bridge to [bus 05-05] [ 0.572191] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff] [ 0.572196] pci 0000:00:1c.5: bridge window [mem disabled] [ 0.572200] pci 0000:00:1c.5: bridge window [mem 0xe0000000-0xe00fffff 64bit pref] [ 0.572217] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.572220] pci 0000:00:01.0: setting latency timer to 64 [ 0.572230] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.572233] pci 0000:00:1c.0: setting latency timer to 64 [ 0.572242] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.572246] pci 0000:00:1c.2: setting latency timer to 64 [ 0.572254] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.572258] pci 0000:00:1c.3: setting latency timer to 64 [ 0.572264] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.572268] pci 0000:00:1c.5: setting latency timer to 64 [ 0.572272] pci_bus 0000:00: resource 4 [io 0x0000-0x03af] [ 0.572273] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7] [ 0.572275] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df] [ 0.572276] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff] [ 0.572278] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff] [ 0.572279] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff] [ 0.572281] pci_bus 0000:00: resource 10 [mem 0xbfa00000-0xffffffff] [ 0.572282] pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe4fffff] [ 0.572284] pci_bus 0000:05: resource 0 [io 0xe000-0xefff] [ 0.572285] pci_bus 0000:05: resource 2 [mem 0xe0000000-0xe00fffff 64bit pref] [ 0.572289] initcall pcibios_assign_resources+0x0/0x84 returned 0 after 197 usecs [ 0.572291] calling sysctl_core_init+0x0/0x2d @ 1 [ 0.572305] initcall sysctl_core_init+0x0/0x2d returned 0 after 10 usecs [ 0.572307] calling inet_init+0x0/0x242 @ 1 [ 0.572322] NET: Registered protocol family 2 [ 0.572358] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.572457] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.572616] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.572687] TCP: Hash tables configured (established 131072 bind 65536) [ 0.572689] TCP reno registered [ 0.572691] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.572694] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.572743] initcall inet_init+0x0/0x242 returned 0 after 421 usecs [ 0.572745] calling af_unix_init+0x0/0x4d @ 1 [ 0.572748] NET: Registered protocol family 1 [ 0.572754] initcall af_unix_init+0x0/0x4d returned 0 after 5 usecs [ 0.572756] calling pci_apply_final_quirks+0x0/0x10b @ 1 [ 0.572764] pci 0000:00:02.0: Boot video device [ 0.827555] PCI: CLS 64 bytes, default 64 [ 0.827562] initcall pci_apply_final_quirks+0x0/0x10b returned 0 after 248882 usecs [ 0.827564] calling populate_rootfs+0x0/0x1f @ 1 [ 0.827568] initcall populate_rootfs+0x0/0x1f returned 676056460 after 0 usecs [ 0.827570] initcall populate_rootfs+0x0/0x1f returned with error code 676056460 [ 0.827573] calling pci_iommu_init+0x0/0x34 @ 1 [ 0.827576] initcall pci_iommu_init+0x0/0x34 returned 0 after 1 usecs [ 0.827578] calling i8259A_init_ops+0x0/0x1d @ 1 [ 0.827582] initcall i8259A_init_ops+0x0/0x1d returned 0 after 1 usecs [ 0.827584] calling sbf_init+0x0/0xc2 @ 1 [ 0.827588] initcall sbf_init+0x0/0xc2 returned 0 after 1 usecs [ 0.827590] calling init_tsc_clocksource+0x0/0x58 @ 1 [ 0.827597] initcall init_tsc_clocksource+0x0/0x58 returned 0 after 3 usecs [ 0.827599] calling add_rtc_cmos+0x0/0x7b @ 1 [ 0.827606] initcall add_rtc_cmos+0x0/0x7b returned 0 after 3 usecs [ 0.827608] calling i8237A_init_ops+0x0/0x11 @ 1 [ 0.827619] initcall i8237A_init_ops+0x0/0x11 returned 0 after 7 usecs [ 0.827623] calling cache_sysfs_init+0x0/0x59 @ 1 [ 0.827743] initcall cache_sysfs_init+0x0/0x59 returned 0 after 113 usecs [ 0.827746] calling mcheck_init_device+0x0/0x21 @ 1 [ 0.827805] initcall mcheck_init_device+0x0/0x21 returned 0 after 54 usecs [ 0.827807] calling threshold_init_device+0x0/0x48 @ 1 [ 0.827813] initcall threshold_init_device+0x0/0x48 returned 0 after 1 usecs [ 0.827815] calling thermal_throttle_init_device+0x0/0x81 @ 1 [ 0.827827] initcall thermal_throttle_init_device+0x0/0x81 returned 0 after 7 usecs [ 0.827830] calling ioapic_init_ops+0x0/0x11 @ 1 [ 0.827833] initcall ioapic_init_ops+0x0/0x11 returned 0 after 1 usecs [ 0.827835] calling add_pcspkr+0x0/0x42 @ 1 [ 0.827851] initcall add_pcspkr+0x0/0x42 returned 0 after 12 usecs [ 0.827854] calling start_periodic_check_for_corruption+0x0/0x50 @ 1 [ 0.827858] initcall start_periodic_check_for_corruption+0x0/0x50 returned 0 after 0 usecs [ 0.827860] calling crc32c_intel_mod_init+0x0/0x22 @ 1 [ 0.827903] initcall crc32c_intel_mod_init+0x0/0x22 returned 0 after 38 usecs [ 0.827906] calling init_sched_debug_procfs+0x0/0x30 @ 1 [ 0.827914] initcall init_sched_debug_procfs+0x0/0x30 returned 0 after 4 usecs [ 0.827916] calling proc_schedstat_init+0x0/0x27 @ 1 [ 0.827921] initcall proc_schedstat_init+0x0/0x27 returned 0 after 2 usecs [ 0.827923] calling proc_execdomains_init+0x0/0x27 @ 1 [ 0.827928] initcall proc_execdomains_init+0x0/0x27 returned 0 after 2 usecs [ 0.827929] calling ioresources_init+0x0/0x44 @ 1 [ 0.827935] initcall ioresources_init+0x0/0x44 returned 0 after 2 usecs [ 0.827937] calling uid_cache_init+0x0/0x88 @ 1 [ 0.827944] initcall uid_cache_init+0x0/0x88 returned 0 after 4 usecs [ 0.827946] calling init_posix_timers+0x0/0x1e0 @ 1 [ 0.827954] initcall init_posix_timers+0x0/0x1e0 returned 0 after 5 usecs [ 0.827956] calling init_posix_cpu_timers+0x0/0x9b @ 1 [ 0.827959] initcall init_posix_cpu_timers+0x0/0x9b returned 0 after 0 usecs [ 0.827961] calling nsproxy_cache_init+0x0/0x32 @ 1 [ 0.827966] initcall nsproxy_cache_init+0x0/0x32 returned 0 after 1 usecs [ 0.827968] calling create_proc_profile+0x0/0x80 @ 1 [ 0.827972] initcall create_proc_profile+0x0/0x80 returned 0 after 0 usecs [ 0.827974] calling timekeeping_init_ops+0x0/0x11 @ 1 [ 0.827977] initcall timekeeping_init_ops+0x0/0x11 returned 0 after 1 usecs [ 0.827979] calling init_clocksource_sysfs+0x0/0x43 @ 1 [ 0.827991] initcall init_clocksource_sysfs+0x0/0x43 returned 0 after 8 usecs [ 0.827993] calling init_timer_list_procfs+0x0/0x30 @ 1 [ 0.827998] initcall init_timer_list_procfs+0x0/0x30 returned 0 after 2 usecs [ 0.828000] calling alarmtimer_init+0x0/0x135 @ 1 [ 0.828022] initcall alarmtimer_init+0x0/0x135 returned 0 after 18 usecs [ 0.828024] calling init_tstats_procfs+0x0/0x30 @ 1 [ 0.828029] initcall init_tstats_procfs+0x0/0x30 returned 0 after 2 usecs [ 0.828031] calling futex_init+0x0/0x57 @ 1 [ 0.828037] initcall futex_init+0x0/0x57 returned 0 after 3 usecs [ 0.828039] calling proc_dma_init+0x0/0x27 @ 1 [ 0.828044] initcall proc_dma_init+0x0/0x27 returned 0 after 2 usecs [ 0.828046] calling proc_modules_init+0x0/0x27 @ 1 [ 0.828051] initcall proc_modules_init+0x0/0x27 returned 0 after 2 usecs [ 0.828053] calling kallsyms_init+0x0/0x2a @ 1 [ 0.828058] initcall kallsyms_init+0x0/0x2a returned 0 after 1 usecs [ 0.828060] calling snapshot_device_init+0x0/0xf @ 1 [ 0.828079] initcall snapshot_device_init+0x0/0xf returned 0 after 14 usecs [ 0.828081] calling crash_save_vmcoreinfo_init+0x0/0x4b4 @ 1 [ 0.828096] initcall crash_save_vmcoreinfo_init+0x0/0x4b4 returned 0 after 11 usecs [ 0.828098] calling crash_notes_memory_init+0x0/0x33 @ 1 [ 0.828105] initcall crash_notes_memory_init+0x0/0x33 returned 0 after 2 usecs [ 0.828106] calling user_namespaces_init+0x0/0x32 @ 1 [ 0.828114] initcall user_namespaces_init+0x0/0x32 returned 0 after 3 usecs [ 0.828115] calling pid_namespaces_init+0x0/0x32 @ 1 [ 0.828119] initcall pid_namespaces_init+0x0/0x32 returned 0 after 1 usecs [ 0.828121] calling audit_init+0x0/0x15 @ 1 [ 0.828124] audit: initializing netlink socket (disabled) [ 0.828130] type=2000 audit(1328563237.672:1): initialized [ 0.828134] initcall audit_init+0x0/0x15 returned 0 after 9 usecs [ 0.828136] calling audit_watch_init+0x0/0x31 @ 1 [ 0.828140] initcall audit_watch_init+0x0/0x31 returned 0 after 1 usecs [ 0.828141] calling audit_tree_init+0x0/0x42 @ 1 [ 0.828145] initcall audit_tree_init+0x0/0x42 returned 0 after 1 usecs [ 0.828147] calling init_kprobes+0x0/0x14f @ 1 [ 0.842913] initcall init_kprobes+0x0/0x14f returned 0 after 14416 usecs [ 0.842915] calling hung_task_init+0x0/0x56 @ 1 [ 0.842955] initcall hung_task_init+0x0/0x56 returned 0 after 34 usecs [ 0.842958] calling irq_pm_init_ops+0x0/0x11 @ 1 [ 0.842964] initcall irq_pm_init_ops+0x0/0x11 returned 0 after 1 usecs [ 0.842966] calling utsname_sysctl_init+0x0/0x11 @ 1 [ 0.842980] initcall utsname_sysctl_init+0x0/0x11 returned 0 after 10 usecs [ 0.842983] calling init_tracepoints+0x0/0x20 @ 1 [ 0.842987] initcall init_tracepoints+0x0/0x20 returned 0 after 1 usecs [ 0.842989] calling init_lstats_procfs+0x0/0x2a @ 1 [ 0.842997] initcall init_lstats_procfs+0x0/0x2a returned 0 after 4 usecs [ 0.842999] calling ftrace_mod_cmd_init+0x0/0xf @ 1 [ 0.843003] initcall ftrace_mod_cmd_init+0x0/0xf returned 0 after 1 usecs [ 0.843005] calling init_events+0x0/0x5d @ 1 [ 0.843012] initcall init_events+0x0/0x5d returned 0 after 3 usecs [ 0.843014] calling init_function_trace+0x0/0x35 @ 1 [ 0.843020] initcall init_function_trace+0x0/0x35 returned 0 after 1 usecs [ 0.843022] calling init_wakeup_tracer+0x0/0x1d @ 1 [ 0.843027] initcall init_wakeup_tracer+0x0/0x1d returned 0 after 1 usecs [ 0.843029] calling stack_trace_init+0x0/0x68 @ 1 [ 0.843037] initcall stack_trace_init+0x0/0x68 returned 0 after 4 usecs [ 0.843039] calling init_mmio_trace+0x0/0xf @ 1 [ 0.843043] initcall init_mmio_trace+0x0/0xf returned 0 after 1 usecs [ 0.843045] calling init_graph_trace+0x0/0x6c @ 1 [ 0.843051] initcall init_graph_trace+0x0/0x6c returned 0 after 2 usecs [ 0.843053] calling init_blk_tracer+0x0/0x54 @ 1 [ 0.843058] initcall init_blk_tracer+0x0/0x54 returned 0 after 1 usecs [ 0.843060] calling perf_event_sysfs_init+0x0/0x8f @ 1 [ 0.843116] initcall perf_event_sysfs_init+0x0/0x8f returned 0 after 51 usecs [ 0.843119] calling init_per_zone_wmark_min+0x0/0x77 @ 1 [ 0.845288] initcall init_per_zone_wmark_min+0x0/0x77 returned 0 after 2110 usecs [ 0.845292] calling kswapd_init+0x0/0x1d @ 1 [ 0.845344] initcall kswapd_init+0x0/0x1d returned 0 after 46 usecs [ 0.845347] calling extfrag_debug_init+0x0/0x78 @ 1 [ 0.845356] initcall extfrag_debug_init+0x0/0x78 returned 0 after 5 usecs [ 0.845359] calling setup_vmstat+0x0/0xc8 @ 1 [ 0.845372] initcall setup_vmstat+0x0/0xc8 returned 0 after 10 usecs [ 0.845374] calling mm_sysfs_init+0x0/0x22 @ 1 [ 0.845383] initcall mm_sysfs_init+0x0/0x22 returned 0 after 4 usecs [ 0.845385] calling proc_vmalloc_init+0x0/0x2a @ 1 [ 0.845391] initcall proc_vmalloc_init+0x0/0x2a returned 0 after 2 usecs [ 0.845393] calling init_emergency_pool+0x0/0x79 @ 1 [ 0.845406] highmem bounce pool size: 64 pages [ 0.845409] initcall init_emergency_pool+0x0/0x79 returned 0 after 12 usecs [ 0.845411] calling procswaps_init+0x0/0x27 @ 1 [ 0.845416] initcall procswaps_init+0x0/0x27 returned 0 after 2 usecs [ 0.845418] calling hugetlb_init+0x0/0x1d8 @ 1 [ 0.845421] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.845429] initcall hugetlb_init+0x0/0x1d8 returned 0 after 7 usecs [ 0.845430] calling ksm_init+0x0/0xb4 @ 1 [ 0.845461] initcall ksm_init+0x0/0xb4 returned 0 after 26 usecs [ 0.845464] calling slab_proc_init+0x0/0x2a @ 1 [ 0.845470] initcall slab_proc_init+0x0/0x2a returned 0 after 2 usecs [ 0.845471] calling slab_sysfs_init+0x0/0xe8 @ 1 [ 0.846404] initcall slab_sysfs_init+0x0/0xe8 returned 0 after 907 usecs [ 0.846406] calling hugepage_init+0x0/0x12a @ 1 [ 0.850631] initcall hugepage_init+0x0/0x12a returned 0 after 4119 usecs [ 0.850634] calling init_cleancache+0x0/0x16 @ 1 [ 0.850643] initcall init_cleancache+0x0/0x16 returned 0 after 5 usecs [ 0.850645] calling fcntl_init+0x0/0x2f @ 1 [ 0.850660] initcall fcntl_init+0x0/0x2f returned 0 after 12 usecs [ 0.850662] calling proc_filesystems_init+0x0/0x27 @ 1 [ 0.850671] initcall proc_filesystems_init+0x0/0x27 returned 0 after 5 usecs [ 0.850672] calling fsnotify_mark_init+0x0/0x46 @ 1 [ 0.850711] initcall fsnotify_mark_init+0x0/0x46 returned 0 after 34 usecs [ 0.850714] calling dnotify_init+0x0/0x7c @ 1 [ 0.850725] initcall dnotify_init+0x0/0x7c returned 0 after 7 usecs [ 0.850727] calling inotify_user_setup+0x0/0x78 @ 1 [ 0.850737] initcall inotify_user_setup+0x0/0x78 returned 0 after 6 usecs [ 0.850739] calling fanotify_user_setup+0x0/0x5a @ 1 [ 0.850750] initcall fanotify_user_setup+0x0/0x5a returned 0 after 7 usecs [ 0.850752] calling aio_setup+0x0/0x85 @ 1 [ 0.850765] initcall aio_setup+0x0/0x85 returned 0 after 10 usecs [ 0.850767] calling proc_locks_init+0x0/0x27 @ 1 [ 0.850773] initcall proc_locks_init+0x0/0x27 returned 0 after 2 usecs [ 0.850774] calling init_mbcache+0x0/0x11 @ 1 [ 0.850778] initcall init_mbcache+0x0/0x11 returned 0 after 1 usecs [ 0.850780] calling dquot_init+0x0/0x112 @ 1 [ 0.850782] VFS: Disk quotas dquot_6.5.2 [ 0.850823] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.850827] initcall dquot_init+0x0/0x112 returned 0 after 42 usecs [ 0.850828] calling quota_init+0x0/0x22 @ 1 [ 0.850835] initcall quota_init+0x0/0x22 returned 0 after 3 usecs [ 0.850837] calling proc_cmdline_init+0x0/0x27 @ 1 [ 0.850843] initcall proc_cmdline_init+0x0/0x27 returned 0 after 2 usecs [ 0.850844] calling proc_consoles_init+0x0/0x27 @ 1 [ 0.850850] initcall proc_consoles_init+0x0/0x27 returned 0 after 2 usecs [ 0.850851] calling proc_cpuinfo_init+0x0/0x27 @ 1 [ 0.850857] initcall proc_cpuinfo_init+0x0/0x27 returned 0 after 2 usecs [ 0.850858] calling proc_devices_init+0x0/0x27 @ 1 [ 0.850864] initcall proc_devices_init+0x0/0x27 returned 0 after 1 usecs [ 0.850865] calling proc_interrupts_init+0x0/0x27 @ 1 [ 0.850870] initcall proc_interrupts_init+0x0/0x27 returned 0 after 2 usecs [ 0.850872] calling proc_loadavg_init+0x0/0x27 @ 1 [ 0.850877] initcall proc_loadavg_init+0x0/0x27 returned 0 after 2 usecs [ 0.850879] calling proc_meminfo_init+0x0/0x27 @ 1 [ 0.850884] initcall proc_meminfo_init+0x0/0x27 returned 0 after 2 usecs [ 0.850886] calling proc_stat_init+0x0/0x27 @ 1 [ 0.850891] initcall proc_stat_init+0x0/0x27 returned 0 after 2 usecs [ 0.850893] calling proc_uptime_init+0x0/0x27 @ 1 [ 0.850898] initcall proc_uptime_init+0x0/0x27 returned 0 after 1 usecs [ 0.850900] calling proc_version_init+0x0/0x27 @ 1 [ 0.850905] initcall proc_version_init+0x0/0x27 returned 0 after 1 usecs [ 0.850907] calling proc_softirqs_init+0x0/0x27 @ 1 [ 0.850913] initcall proc_softirqs_init+0x0/0x27 returned 0 after 2 usecs [ 0.850915] calling proc_kcore_init+0x0/0xae @ 1 [ 0.850921] initcall proc_kcore_init+0x0/0xae returned 0 after 2 usecs [ 0.850923] calling vmcore_init+0x0/0x7c @ 1 [ 0.850927] initcall vmcore_init+0x0/0x7c returned 0 after 1 usecs [ 0.850928] calling proc_kmsg_init+0x0/0x2a @ 1 [ 0.850934] initcall proc_kmsg_init+0x0/0x2a returned 0 after 2 usecs [ 0.850935] calling proc_page_init+0x0/0x4a @ 1 [ 0.850941] initcall proc_page_init+0x0/0x4a returned 0 after 2 usecs [ 0.850943] calling proc_version_signature_init+0x0/0x27 @ 1 [ 0.850949] initcall proc_version_signature_init+0x0/0x27 returned 0 after 2 usecs [ 0.850951] calling init_devpts_fs+0x0/0x3d @ 1 [ 0.850965] initcall init_devpts_fs+0x0/0x3d returned 0 after 11 usecs [ 0.850967] calling init_ext3_fs+0x0/0x6c @ 1 [ 0.851005] initcall init_ext3_fs+0x0/0x6c returned 0 after 33 usecs [ 0.851007] calling init_ext2_fs+0x0/0x6c @ 1 [ 0.851029] initcall init_ext2_fs+0x0/0x6c returned 0 after 17 usecs [ 0.851031] calling ext4_init_fs+0x0/0x46 @ 1 [ 0.851145] initcall ext4_init_fs+0x0/0x46 returned 0 after 108 usecs [ 0.851146] calling journal_init+0x0/0x1a @ 1 [ 0.851204] initcall journal_init+0x0/0x1a returned 0 after 52 usecs [ 0.851206] calling journal_init+0x0/0x2c @ 1 [ 0.851239] initcall journal_init+0x0/0x2c returned 0 after 29 usecs [ 0.851241] calling init_ramfs_fs+0x0/0xf @ 1 [ 0.851246] initcall init_ramfs_fs+0x0/0xf returned 0 after 2 usecs [ 0.851248] calling init_hugetlbfs_fs+0x0/0x8b @ 1 [ 0.851279] initcall init_hugetlbfs_fs+0x0/0x8b returned 0 after 26 usecs [ 0.851281] calling ecryptfs_init+0x0/0x1cc @ 1 [ 0.851386] initcall ecryptfs_init+0x0/0x1cc returned 0 after 98 usecs [ 0.851388] calling fuse_init+0x0/0x18e @ 1 [ 0.851390] fuse init (API version 7.16) [ 0.851445] initcall fuse_init+0x0/0x18e returned 0 after 52 usecs [ 0.851447] calling init_pstore_fs+0x0/0xf @ 1 [ 0.851453] initcall init_pstore_fs+0x0/0xf returned 0 after 2 usecs [ 0.851455] calling ipc_init+0x0/0x20 @ 1 [ 0.851459] msgmni has been set to 1611 [ 0.851464] initcall ipc_init+0x0/0x20 returned 0 after 6 usecs [ 0.851466] calling ipc_sysctl_init+0x0/0x11 @ 1 [ 0.851482] initcall ipc_sysctl_init+0x0/0x11 returned 0 after 12 usecs [ 0.851484] calling init_mqueue_fs+0x0/0x9f @ 1 [ 0.851531] initcall init_mqueue_fs+0x0/0x9f returned 0 after 41 usecs [ 0.851533] calling key_proc_init+0x0/0x37 @ 1 [ 0.851539] initcall key_proc_init+0x0/0x37 returned 0 after 2 usecs [ 0.851541] calling selinux_nf_ip_init+0x0/0x65 @ 1 [ 0.851545] initcall selinux_nf_ip_init+0x0/0x65 returned 0 after 1 usecs [ 0.851547] calling init_sel_fs+0x0/0x84 @ 1 [ 0.851551] initcall init_sel_fs+0x0/0x84 returned 0 after 1 usecs [ 0.851553] calling selnl_init+0x0/0x59 @ 1 [ 0.851560] initcall selnl_init+0x0/0x59 returned 0 after 3 usecs [ 0.851562] calling sel_netif_init+0x0/0x72 @ 1 [ 0.851566] initcall sel_netif_init+0x0/0x72 returned 0 after 0 usecs [ 0.851568] calling sel_netnode_init+0x0/0x7a @ 1 [ 0.851572] initcall sel_netnode_init+0x0/0x7a returned 0 after 0 usecs [ 0.851574] calling sel_netport_init+0x0/0x7a @ 1 [ 0.851578] initcall sel_netport_init+0x0/0x7a returned 0 after 1 usecs [ 0.851580] calling aurule_init+0x0/0x46 @ 1 [ 0.851584] initcall aurule_init+0x0/0x46 returned 0 after 1 usecs [ 0.851586] calling init_smk_fs+0x0/0x6b @ 1 [ 0.851590] initcall init_smk_fs+0x0/0x6b returned 0 after 1 usecs [ 0.851592] calling crypto_wq_init+0x0/0x38 @ 1 [ 0.851618] initcall crypto_wq_init+0x0/0x38 returned 0 after 20 usecs [ 0.851621] calling crypto_algapi_init+0x0/0xc @ 1 [ 0.851628] initcall crypto_algapi_init+0x0/0xc returned 0 after 2 usecs [ 0.851630] calling skcipher_module_init+0x0/0x2e @ 1 [ 0.851634] initcall skcipher_module_init+0x0/0x2e returned 0 after 0 usecs [ 0.851636] calling chainiv_module_init+0x0/0xf @ 1 [ 0.851642] initcall chainiv_module_init+0x0/0xf returned 0 after 1 usecs [ 0.851644] calling eseqiv_module_init+0x0/0xf @ 1 [ 0.851648] initcall eseqiv_module_init+0x0/0xf returned 0 after 0 usecs [ 0.851650] calling hmac_module_init+0x0/0xf @ 1 [ 0.851654] initcall hmac_module_init+0x0/0xf returned 0 after 1 usecs [ 0.851656] calling md5_mod_init+0x0/0xf @ 1 [ 0.851685] initcall md5_mod_init+0x0/0xf returned 0 after 24 usecs [ 0.851688] calling sha1_generic_mod_init+0x0/0xf @ 1 [ 0.851718] initcall sha1_generic_mod_init+0x0/0xf returned 0 after 23 usecs [ 0.851720] calling sha256_generic_mod_init+0x0/0x33 @ 1 [ 0.851769] initcall sha256_generic_mod_init+0x0/0x33 returned 0 after 43 usecs [ 0.851772] calling crypto_ecb_module_init+0x0/0xf @ 1 [ 0.851776] initcall crypto_ecb_module_init+0x0/0xf returned 0 after 1 usecs [ 0.851778] calling crypto_cbc_module_init+0x0/0xf @ 1 [ 0.851782] initcall crypto_cbc_module_init+0x0/0xf returned 0 after 0 usecs [ 0.851784] calling aes_init+0x0/0xf @ 1 [ 0.851812] initcall aes_init+0x0/0xf returned 0 after 22 usecs [ 0.851814] calling crc32c_mod_init+0x0/0xf @ 1 [ 0.851842] initcall crc32c_mod_init+0x0/0xf returned 0 after 22 usecs [ 0.851844] calling krng_mod_init+0x0/0xf @ 1 [ 0.851873] initcall krng_mod_init+0x0/0xf returned 0 after 23 usecs [ 0.851875] calling proc_genhd_init+0x0/0x44 @ 1 [ 0.851882] initcall proc_genhd_init+0x0/0x44 returned 0 after 3 usecs [ 0.851884] calling bsg_init+0x0/0x117 @ 1 [ 0.851914] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.851918] initcall bsg_init+0x0/0x117 returned 0 after 29 usecs [ 0.851921] calling init_cgroup_blkio+0x0/0xf @ 1 [ 0.851925] initcall init_cgroup_blkio+0x0/0xf returned 0 after 1 usecs [ 0.851927] calling throtl_init+0x0/0x49 @ 1 [ 0.851951] initcall throtl_init+0x0/0x49 returned 0 after 18 usecs [ 0.851953] calling noop_init+0x0/0x11 @ 1 [ 0.851956] io scheduler noop registered [ 0.851960] initcall noop_init+0x0/0x11 returned 0 after 2 usecs [ 0.851962] calling deadline_init+0x0/0x11 @ 1 [ 0.851964] io scheduler deadline registered [ 0.851968] initcall deadline_init+0x0/0x11 returned 0 after 2 usecs [ 0.851970] calling cfq_init+0x0/0xbb @ 1 [ 0.851980] io scheduler cfq registered (default) [ 0.851984] initcall cfq_init+0x0/0xbb returned 0 after 9 usecs [ 0.851985] calling percpu_counter_startup+0x0/0x16 @ 1 [ 0.851990] initcall percpu_counter_startup+0x0/0x16 returned 0 after 2 usecs [ 0.851992] calling audit_classes_init+0x0/0x4f @ 1 [ 0.851997] initcall audit_classes_init+0x0/0x4f returned 0 after 2 usecs [ 0.851999] calling lnw_gpio_init+0x0/0x3a @ 1 [ 0.852018] initcall lnw_gpio_init+0x0/0x3a returned 0 after 16 usecs [ 0.852020] calling timbgpio_init+0x0/0xf @ 1 [ 0.852027] initcall timbgpio_init+0x0/0xf returned 0 after 4 usecs [ 0.852029] calling ucb1400_gpio_init+0x0/0xf @ 1 [ 0.852037] initcall ucb1400_gpio_init+0x0/0xf returned 0 after 4 usecs [ 0.852038] calling pci_proc_init+0x0/0x64 @ 1 [ 0.852064] initcall pci_proc_init+0x0/0x64 returned 0 after 21 usecs [ 0.852065] calling pcie_portdrv_init+0x0/0x6f @ 1 [ 0.852085] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.852105] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.852148] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.852186] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.852243] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.852282] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X [ 0.852340] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.852378] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X [ 0.852436] pcieport 0000:00:1c.5: setting latency timer to 64 [ 0.852474] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X [ 0.852527] initcall pcie_portdrv_init+0x0/0x6f returned 0 after 447 usecs [ 0.852529] calling aer_service_init+0x0/0x2c @ 1 [ 0.852539] initcall aer_service_init+0x0/0x2c returned 0 after 7 usecs [ 0.852541] calling pcie_pme_service_init+0x0/0xf @ 1 [ 0.852555] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 0.852557] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 0.852572] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.852576] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.852591] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt [ 0.852592] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 0.852596] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded [ 0.852611] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 0.852615] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 0.852630] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt [ 0.852631] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt [ 0.852635] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded [ 0.852641] initcall pcie_pme_service_init+0x0/0xf returned 0 after 94 usecs [ 0.852643] calling ioapic_init+0x0/0x16 @ 1 [ 0.852653] initcall ioapic_init+0x0/0x16 returned 0 after 6 usecs [ 0.852655] calling pci_hotplug_init+0x0/0x4d @ 1 [ 0.852657] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.852660] initcall pci_hotplug_init+0x0/0x4d returned 0 after 2 usecs [ 0.852662] calling pcied_init+0x0/0xf1 @ 1 [ 0.852678] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.852681] initcall pcied_init+0x0/0xf1 returned 0 after 15 usecs [ 0.852684] calling fb_console_init+0x0/0x110 @ 1 [ 0.852699] initcall fb_console_init+0x0/0x110 returned 0 after 11 usecs [ 0.852701] calling imsttfb_init+0x0/0x40 @ 1 [ 0.852711] initcall imsttfb_init+0x0/0x40 returned 0 after 7 usecs [ 0.852713] calling asiliantfb_init+0x0/0x2b @ 1 [ 0.852723] initcall asiliantfb_init+0x0/0x2b returned 0 after 6 usecs [ 0.852725] calling efifb_init+0x0/0x7c @ 1 [ 0.852737] initcall efifb_init+0x0/0x7c returned -19 after 8 usecs [ 0.852739] calling intel_idle_init+0x0/0x63 @ 1 [ 0.852742] intel_idle: MWAIT substates: 0x1120 [ 0.852743] intel_idle: v0.4 model 0x2A [ 0.852744] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.852759] initcall intel_idle_init+0x0/0x63 returned 0 after 16 usecs [ 0.852761] calling acpi_reserve_resources+0x0/0xc8 @ 1 [ 0.852767] initcall acpi_reserve_resources+0x0/0xc8 returned 0 after 2 usecs [ 0.852770] calling irqrouter_init_ops+0x0/0x23 @ 1 [ 0.852774] initcall irqrouter_init_ops+0x0/0x23 returned 0 after 1 usecs [ 0.852776] calling acpi_ac_init+0x0/0x44 @ 1 [ 0.852792] initcall acpi_ac_init+0x0/0x44 returned 0 after 12 usecs [ 0.852794] calling acpi_button_init+0x0/0xf @ 1 [ 0.852830] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.852834] ACPI: Power Button [PWRB] [ 0.852860] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.852862] ACPI: Power Button [PWRF] [ 0.852873] initcall acpi_button_init+0x0/0xf returned 0 after 74 usecs [ 0.852875] calling acpi_fan_init+0x0/0x15 @ 1 [ 0.852888] initcall acpi_fan_init+0x0/0x15 returned 0 after 9 usecs [ 0.852890] calling acpi_processor_init+0x0/0xd0 @ 1 [ 0.852892] ACPI: acpi_idle yielding to intel_idle [ 0.855951] initcall acpi_processor_init+0x0/0xd0 returned 0 after 2984 usecs [ 0.855955] calling acpi_container_init+0x0/0x4d @ 1 [ 0.856919] initcall acpi_container_init+0x0/0x4d returned 0 after 935 usecs [ 0.856922] calling acpi_thermal_init+0x0/0x3c @ 1 [ 0.856944] initcall acpi_thermal_init+0x0/0x3c returned 0 after 16 usecs [ 0.856947] calling acpi_battery_init+0x0/0x40 @ 1 [ 0.856967] initcall acpi_battery_init+0x0/0x40 returned 0 after 15 usecs [ 0.856970] calling erst_init+0x0/0x2aa @ 1 [ 0.856973] ERST: Table is not found! [ 0.856978] initcall erst_init+0x0/0x2aa returned 0 after 3 usecs [ 0.856981] calling pnpbios_thread_init+0x0/0x5e @ 1 [ 0.856986] initcall pnpbios_thread_init+0x0/0x5e returned 0 after 0 usecs [ 0.856989] calling isapnp_init+0x0/0x11 @ 1 [ 0.856998] initcall isapnp_init+0x0/0x11 returned 2 after 4 usecs [ 0.857002] initcall isapnp_init+0x0/0x11 returned with error code 2 [ 0.857005] calling virtio_pci_init+0x0/0x16 @ 1 [ 0.857023] initcall virtio_pci_init+0x0/0x16 returned 0 after 13 usecs [ 0.857026] calling xenbus_probe_initcall+0x0/0x37 @ 1 [ 0.857031] initcall xenbus_probe_initcall+0x0/0x37 returned -19 after 1 usecs [ 0.857034] calling xen_tmem_init+0x0/0x53 @ 1 [ 0.857038] initcall xen_tmem_init+0x0/0x53 returned 0 after 1 usecs [ 0.857041] calling hypervisor_subsys_init+0x0/0x21 @ 1 [ 0.857045] initcall hypervisor_subsys_init+0x0/0x21 returned -19 after 0 usecs [ 0.857048] calling hyper_sysfs_init+0x0/0x18 @ 1 [ 0.857052] initcall hyper_sysfs_init+0x0/0x18 returned -19 after 0 usecs [ 0.857055] calling platform_pci_module_init+0x0/0x24 @ 1 [ 0.857059] initcall platform_pci_module_init+0x0/0x24 returned -19 after 0 usecs [ 0.857062] calling pty_init+0x0/0x11 @ 1 [ 0.857114] initcall pty_init+0x0/0x11 returned 0 after 46 usecs [ 0.857116] calling sysrq_init+0x0/0x7a @ 1 [ 0.857125] initcall sysrq_init+0x0/0x7a returned 0 after 4 usecs [ 0.857128] calling xen_hvc_init+0x0/0x118 @ 1 [ 0.857132] initcall xen_hvc_init+0x0/0x118 returned -19 after 1 usecs [ 0.857135] calling serial8250_init+0x0/0x65 @ 1 [ 0.857138] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.878127] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.878178] calling 2_async_isapnp_init+0x0/0xa @ 20 [ 0.878192] isapnp: Scanning for PnP cards... [ 0.905556] Freeing initrd memory: 13312k freed [ 0.906804] initcall 1_async_populate_rootfs+0x0/0x30 returned 0 after 413363 usecs [ 1.232117] isapnp: No Plug & Play device found [ 1.232123] initcall 2_async_isapnp_init+0x0/0xa returned 0 after 345720 usecs [ 1.283513] initcall serial8250_init+0x0/0x65 returned 0 after 416472 usecs [ 1.283516] calling serial8250_pnp_init+0x0/0xf @ 1 [ 1.304512] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.304604] initcall serial8250_pnp_init+0x0/0xf returned 0 after 20594 usecs [ 1.304606] calling serial8250_pci_init+0x0/0x16 @ 1 [ 1.304627] initcall serial8250_pci_init+0x0/0x16 returned 0 after 17 usecs [ 1.304628] calling init_kgdboc+0x0/0x15 @ 1 [ 1.304634] initcall init_kgdboc+0x0/0x15 returned 0 after 2 usecs [ 1.304637] calling rand_initialize+0x0/0x30 @ 1 [ 1.304657] initcall rand_initialize+0x0/0x30 returned 0 after 16 usecs [ 1.304659] calling ttyprintk_init+0x0/0x12f @ 1 [ 1.304682] initcall ttyprintk_init+0x0/0x12f returned 0 after 19 usecs [ 1.304683] calling hpet_init+0x0/0x57 @ 1 [ 1.304766] initcall hpet_init+0x0/0x57 returned 0 after 77 usecs [ 1.304768] calling agp_init+0x0/0x2f @ 1 [ 1.304770] Linux agpgart interface v0.103 [ 1.304773] initcall agp_init+0x0/0x2f returned 0 after 2 usecs [ 1.304775] calling agp_amdk7_init+0x0/0x24 @ 1 [ 1.304786] initcall agp_amdk7_init+0x0/0x24 returned 0 after 7 usecs [ 1.304788] calling agp_amd64_mod_init+0x0/0xa @ 1 [ 1.304804] initcall agp_amd64_mod_init+0x0/0xa returned -19 after 12 usecs [ 1.304806] calling agp_intel_init+0x0/0x24 @ 1 [ 1.304848] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset [ 1.304906] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 1.305647] agpgart-intel 0000:00:00.0: detected 65536K stolen memory [ 1.305724] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 1.305741] initcall agp_intel_init+0x0/0x24 returned 0 after 908 usecs [ 1.305743] calling agp_nvidia_init+0x0/0x24 @ 1 [ 1.305756] initcall agp_nvidia_init+0x0/0x24 returned 0 after 8 usecs [ 1.305757] calling agp_via_init+0x0/0x24 @ 1 [ 1.305768] initcall agp_via_init+0x0/0x24 returned 0 after 7 usecs [ 1.305769] calling cn_proc_init+0x0/0x31 @ 1 [ 1.305775] initcall cn_proc_init+0x0/0x31 returned 0 after 2 usecs [ 1.305776] calling isa_bus_init+0x0/0x33 @ 1 [ 1.305793] initcall isa_bus_init+0x0/0x33 returned 0 after 13 usecs [ 1.305796] calling topology_sysfs_init+0x0/0x55 @ 1 [ 1.305809] initcall topology_sysfs_init+0x0/0x55 returned 0 after 10 usecs [ 1.305811] calling brd_init+0x0/0x185 @ 1 [ 1.306463] brd: module loaded [ 1.306466] initcall brd_init+0x0/0x185 returned 0 after 636 usecs [ 1.306468] calling loop_init+0x0/0x19d @ 1 [ 1.306805] loop: module loaded [ 1.306808] initcall loop_init+0x0/0x19d returned 0 after 329 usecs [ 1.306810] calling init+0x0/0x79 @ 1 [ 1.306822] initcall init+0x0/0x79 returned 0 after 8 usecs [ 1.306824] calling xlblk_init+0x0/0x79 @ 1 [ 1.306827] initcall xlblk_init+0x0/0x79 returned -19 after 1 usecs [ 1.306829] calling htcpld_core_init+0x0/0x24 @ 1 [ 1.306848] initcall htcpld_core_init+0x0/0x24 returned -19 after 15 usecs [ 1.306850] calling wm8994_i2c_init+0x0/0x30 @ 1 [ 1.306858] initcall wm8994_i2c_init+0x0/0x30 returned 0 after 4 usecs [ 1.306860] calling adp5520_init+0x0/0x11 @ 1 [ 1.306869] initcall adp5520_init+0x0/0x11 returned 0 after 5 usecs [ 1.306871] calling mac_hid_init+0x0/0x1c @ 1 [ 1.306881] initcall mac_hid_init+0x0/0x1c returned 0 after 7 usecs [ 1.306883] calling spi_transport_init+0x0/0x7c @ 1 [ 1.306895] initcall spi_transport_init+0x0/0x7c returned 0 after 8 usecs [ 1.306897] calling scsi_dh_init+0x0/0x4a @ 1 [ 1.306901] initcall scsi_dh_init+0x0/0x4a returned 0 after 1 usecs [ 1.306902] calling sym2_init+0x0/0x47 @ 1 [ 1.306916] initcall sym2_init+0x0/0x47 returned 0 after 9 usecs [ 1.306917] calling init_sd+0x0/0x113 @ 1 [ 1.306944] initcall init_sd+0x0/0x113 returned 0 after 23 usecs [ 1.306946] calling init_sr+0x0/0x3d @ 1 [ 1.306954] initcall init_sr+0x0/0x3d returned 0 after 4 usecs [ 1.306956] calling init_sg+0x0/0x5c @ 1 [ 1.306972] initcall init_sg+0x0/0x5c returned 0 after 13 usecs [ 1.306974] calling adma_ata_init+0x0/0x16 @ 1 [ 1.306985] initcall adma_ata_init+0x0/0x16 returned 0 after 8 usecs [ 1.306987] calling piix_init+0x0/0x24 @ 1 [ 1.307000] initcall piix_init+0x0/0x24 returned 0 after 9 usecs [ 1.307002] calling sis_init+0x0/0x16 @ 1 [ 1.307013] initcall sis_init+0x0/0x16 returned 0 after 7 usecs [ 1.307015] calling pacpi_init+0x0/0x16 @ 1 [ 1.307026] initcall pacpi_init+0x0/0x16 returned 0 after 7 usecs [ 1.307028] calling ata_generic_init+0x0/0x16 @ 1 [ 1.307040] initcall ata_generic_init+0x0/0x16 returned 0 after 8 usecs [ 1.307042] calling ce4100_spi_init+0x0/0x16 @ 1 [ 1.307052] initcall ce4100_spi_init+0x0/0x16 returned 0 after 6 usecs [ 1.307054] calling marvell_init+0x0/0x44 @ 1 [ 1.307089] initcall marvell_init+0x0/0x44 returned 0 after 31 usecs [ 1.307091] calling davicom_init+0x0/0x4d @ 1 [ 1.307105] initcall davicom_init+0x0/0x4d returned 0 after 10 usecs [ 1.307107] calling cicada_init+0x0/0x33 @ 1 [ 1.307118] initcall cicada_init+0x0/0x33 returned 0 after 7 usecs [ 1.307119] calling lxt_init+0x0/0x4d @ 1 [ 1.307133] initcall lxt_init+0x0/0x4d returned 0 after 10 usecs [ 1.307135] calling qs6612_init+0x0/0xf @ 1 [ 1.307143] initcall qs6612_init+0x0/0xf returned 0 after 4 usecs [ 1.307144] calling smsc_init+0x0/0x81 @ 1 [ 1.307166] initcall smsc_init+0x0/0x81 returned 0 after 17 usecs [ 1.307167] calling vsc82xx_init+0x0/0x33 @ 1 [ 1.307179] initcall vsc82xx_init+0x0/0x33 returned 0 after 8 usecs [ 1.307181] calling broadcom_init+0x0/0x135 @ 1 [ 1.307225] initcall broadcom_init+0x0/0x135 returned 0 after 39 usecs [ 1.307227] calling icplus_init+0x0/0x24 @ 1 [ 1.307238] initcall icplus_init+0x0/0x24 returned 0 after 7 usecs [ 1.307240] calling realtek_init+0x0/0xf @ 1 [ 1.307248] initcall realtek_init+0x0/0xf returned 0 after 4 usecs [ 1.307250] calling et1011c_init+0x0/0xf @ 1 [ 1.307258] initcall et1011c_init+0x0/0xf returned 0 after 4 usecs [ 1.307260] calling fixed_mdio_bus_init+0x0/0xf0 @ 1 [ 1.307283] Fixed MDIO Bus: probed [ 1.307287] initcall fixed_mdio_bus_init+0x0/0xf0 returned 0 after 22 usecs [ 1.307289] calling ns_init+0x0/0xf @ 1 [ 1.307297] initcall ns_init+0x0/0xf returned 0 after 4 usecs [ 1.307299] calling ste10Xp_init+0x0/0x1d @ 1 [ 1.307310] initcall ste10Xp_init+0x0/0x1d returned 0 after 8 usecs [ 1.307312] calling net_olddevs_init+0x0/0x18 @ 1 [ 1.307319] initcall net_olddevs_init+0x0/0x18 returned 0 after 3 usecs [ 1.307321] calling ppp_init+0x0/0xe5 @ 1 [ 1.307324] PPP generic driver version 2.4.2 [ 1.307346] initcall ppp_init+0x0/0xe5 returned 0 after 20 usecs [ 1.307348] calling netif_init+0x0/0x5b @ 1 [ 1.307352] initcall netif_init+0x0/0x5b returned -19 after 0 usecs [ 1.307354] calling tun_init+0x0/0x8b @ 1 [ 1.307356] tun: Universal TUN/TAP device driver, 1.6 [ 1.307357] tun: (C) 1999-2004 Max Krasnyansky [ 1.307377] initcall tun_init+0x0/0x8b returned 0 after 19 usecs [ 1.307378] calling init+0x0/0xf @ 1 [ 1.307386] initcall init+0x0/0xf returned 0 after 4 usecs [ 1.307388] calling cdrom_init+0x0/0x15 @ 1 [ 1.307400] initcall cdrom_init+0x0/0x15 returned 0 after 7 usecs [ 1.307402] calling mon_init+0x0/0xe0 @ 1 [ 1.307439] initcall mon_init+0x0/0xe0 returned 0 after 33 usecs [ 1.307442] calling ehci_hcd_init+0x0/0x1c @ 1 [ 1.307444] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.307458] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.307470] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.307474] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.307493] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.307513] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.311415] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 1.311429] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfe507000 [ 1.323420] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.323523] hub 1-0:1.0: USB hub found [ 1.323526] hub 1-0:1.0: 2 ports detected [ 1.323568] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.323576] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.323579] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 1.323598] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.323617] ehci_hcd 0000:00:1d.0: debug port 2 [ 1.327486] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 1.327496] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe506000 [ 1.339415] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.339511] hub 2-0:1.0: USB hub found [ 1.339513] hub 2-0:1.0: 2 ports detected [ 1.339550] initcall ehci_hcd_init+0x0/0x1c returned 0 after 31359 usecs [ 1.339553] calling ohci_hcd_mod_init+0x0/0x53 @ 1 [ 1.339555] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.339564] initcall ohci_hcd_mod_init+0x0/0x53 returned 0 after 8 usecs [ 1.339566] calling uhci_hcd_init+0x0/0x1c @ 1 [ 1.339569] uhci_hcd: USB Universal Host Controller Interface driver [ 1.339584] initcall uhci_hcd_init+0x0/0x1c returned 0 after 14 usecs [ 1.339586] calling i8042_init+0x0/0x85 @ 1 [ 1.339617] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.344225] i8042: Detected active multiplexing controller, rev 1.1 [ 1.345764] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.345769] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.345790] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.345804] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.345817] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.345846] initcall i8042_init+0x0/0x85 returned 0 after 6109 usecs [ 1.345848] calling mousedev_init+0x0/0x7f @ 1 [ 1.345885] mousedev: PS/2 mouse device common for all mice [ 1.345888] initcall mousedev_init+0x0/0x7f returned 0 after 35 usecs [ 1.345891] calling evdev_init+0x0/0xf @ 1 [ 1.345922] initcall evdev_init+0x0/0xf returned 0 after 27 usecs [ 1.345924] calling atkbd_init+0x0/0x20 @ 1 [ 1.345939] initcall atkbd_init+0x0/0x20 returned 0 after 11 usecs [ 1.345941] calling uinput_init+0x0/0xf @ 1 [ 1.345967] initcall uinput_init+0x0/0xf returned 0 after 22 usecs [ 1.345969] calling cmos_init+0x0/0x5e @ 1 [ 1.345985] rtc_cmos 00:04: RTC can wake from S4 [ 1.346102] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.346137] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.346145] initcall cmos_init+0x0/0x5e returned 0 after 167 usecs [ 1.346147] calling dm_init+0x0/0x30 @ 1 [ 1.346190] device-mapper: uevent: version 1.0.3 [ 1.346237] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 1.346241] initcall dm_init+0x0/0x30 returned 0 after 88 usecs [ 1.346243] calling pci_eisa_init_module+0x0/0x16 @ 1 [ 1.346255] initcall pci_eisa_init_module+0x0/0x16 returned 0 after 8 usecs [ 1.346258] calling virtual_eisa_root_init+0x0/0x4d @ 1 [ 1.346269] EISA: Probing bus 0 at eisa.0 [ 1.346271] EISA: Cannot allocate resource for mainboard [ 1.346272] Cannot allocate resource for EISA slot 1 [ 1.346273] Cannot allocate resource for EISA slot 2 [ 1.346274] Cannot allocate resource for EISA slot 3 [ 1.346275] Cannot allocate resource for EISA slot 4 [ 1.346276] Cannot allocate resource for EISA slot 5 [ 1.346278] Cannot allocate resource for EISA slot 6 [ 1.346279] Cannot allocate resource for EISA slot 7 [ 1.346280] Cannot allocate resource for EISA slot 8 [ 1.346281] EISA: Detected 0 cards. [ 1.346284] initcall virtual_eisa_root_init+0x0/0x4d returned 0 after 22 usecs [ 1.346286] calling cpufreq_stats_init+0x0/0x84 @ 1 [ 1.346292] initcall cpufreq_stats_init+0x0/0x84 returned 0 after 2 usecs [ 1.346295] calling cpufreq_gov_powersave_init+0x0/0xf @ 1 [ 1.346299] initcall cpufreq_gov_powersave_init+0x0/0xf returned 0 after 1 usecs [ 1.346301] calling cpufreq_gov_userspace_init+0x0/0xf @ 1 [ 1.346306] initcall cpufreq_gov_userspace_init+0x0/0xf returned 0 after 1 usecs [ 1.346308] calling cpufreq_gov_dbs_init+0x0/0x57 @ 1 [ 1.346313] initcall cpufreq_gov_dbs_init+0x0/0x57 returned 0 after 1 usecs [ 1.346315] calling cpufreq_gov_dbs_init+0x0/0xf @ 1 [ 1.346319] initcall cpufreq_gov_dbs_init+0x0/0xf returned 0 after 1 usecs [ 1.346321] calling powernow_k6_init+0x0/0xab @ 1 [ 1.346325] initcall powernow_k6_init+0x0/0xab returned -19 after 0 usecs [ 1.346328] calling longrun_init+0x0/0x2d @ 1 [ 1.346332] initcall longrun_init+0x0/0x2d returned -19 after 0 usecs [ 1.346334] calling cpufreq_gx_init+0x0/0x13d @ 1 [ 1.346338] initcall cpufreq_gx_init+0x0/0x13d returned -19 after 0 usecs [ 1.346340] calling speedstep_init+0x0/0xe9 @ 1 [ 1.346344] initcall speedstep_init+0x0/0xe9 returned -19 after 1 usecs [ 1.346346] calling speedstep_init+0x0/0xb5 @ 1 [ 1.346350] initcall speedstep_init+0x0/0xb5 returned -19 after 0 usecs [ 1.346352] calling nforce2_init+0x0/0x6f @ 1 [ 1.346356] cpufreq-nforce2: No nForce2 chipset. [ 1.346359] initcall nforce2_init+0x0/0x6f returned -19 after 3 usecs [ 1.346361] calling init_ladder+0x0/0xf @ 1 [ 1.346424] cpuidle: using governor ladder [ 1.346428] initcall init_ladder+0x0/0xf returned 0 after 61 usecs [ 1.346430] calling init_menu+0x0/0xf @ 1 [ 1.346532] cpuidle: using governor menu [ 1.346535] initcall init_menu+0x0/0xf returned 0 after 99 usecs [ 1.346537] calling efivars_init+0x0/0xda @ 1 [ 1.346540] EFI Variables Facility v0.08 2004-May-17 [ 1.346543] initcall efivars_init+0x0/0xda returned 0 after 2 usecs [ 1.346544] calling staging_init+0x0/0x7 @ 1 [ 1.346548] initcall staging_init+0x0/0x7 returned 0 after 0 usecs [ 1.346550] calling flow_cache_init_global+0x0/0x32 @ 1 [ 1.346564] initcall flow_cache_init_global+0x0/0x32 returned 0 after 10 usecs [ 1.346566] calling llc_init+0x0/0x1b @ 1 [ 1.346570] initcall llc_init+0x0/0x1b returned 0 after 1 usecs [ 1.346571] calling snap_init+0x0/0x33 @ 1 [ 1.346576] initcall snap_init+0x0/0x33 returned 0 after 1 usecs [ 1.346578] calling rif_init+0x0/0x6e @ 1 [ 1.346588] initcall rif_init+0x0/0x6e returned 0 after 6 usecs [ 1.346590] calling blackhole_module_init+0x0/0xf @ 1 [ 1.346595] initcall blackhole_module_init+0x0/0xf returned 0 after 1 usecs [ 1.346597] calling init_cgroup_cls+0x0/0x33 @ 1 [ 1.346602] initcall init_cgroup_cls+0x0/0x33 returned 0 after 1 usecs [ 1.346604] calling sysctl_ipv4_init+0x0/0x71 @ 1 [ 1.346708] initcall sysctl_ipv4_init+0x0/0x71 returned 0 after 98 usecs [ 1.346710] calling init_syncookies+0x0/0x16 @ 1 [ 1.346734] initcall init_syncookies+0x0/0x16 returned 0 after 20 usecs [ 1.346737] calling ipv4_netfilter_init+0x0/0x20 @ 1 [ 1.346741] initcall ipv4_netfilter_init+0x0/0x20 returned 0 after 1 usecs [ 1.346743] calling inet_diag_init+0x0/0x7c @ 1 [ 1.346750] initcall inet_diag_init+0x0/0x7c returned 0 after 4 usecs [ 1.346752] calling tcp_diag_init+0x0/0xf @ 1 [ 1.346756] initcall tcp_diag_init+0x0/0xf returned 0 after 1 usecs [ 1.346758] calling cubictcp_register+0x0/0x83 @ 1 [ 1.346761] TCP cubic registered [ 1.346764] initcall cubictcp_register+0x0/0x83 returned 0 after 2 usecs [ 1.346766] calling inet6_init+0x0/0x52 @ 1 [ 1.346844] NET: Registered protocol family 10 [ 1.347137] initcall inet6_init+0x0/0x52 returned 0 after 358 usecs [ 1.347139] calling packet_init+0x0/0x39 @ 1 [ 1.347142] NET: Registered protocol family 17 [ 1.347147] initcall packet_init+0x0/0x39 returned 0 after 3 usecs [ 1.347149] calling dsa_init_module+0x0/0x11 @ 1 [ 1.347153] initcall dsa_init_module+0x0/0x11 returned 0 after 1 usecs [ 1.347155] calling edsa_init_module+0x0/0x11 @ 1 [ 1.347159] initcall edsa_init_module+0x0/0x11 returned 0 after 1 usecs [ 1.347161] calling trailer_init_module+0x0/0x11 @ 1 [ 1.347165] initcall trailer_init_module+0x0/0x11 returned 0 after 0 usecs [ 1.347167] calling mv88e6060_init+0x0/0x11 @ 1 [ 1.347171] initcall mv88e6060_init+0x0/0x11 returned 0 after 1 usecs [ 1.347173] calling mv88e6123_61_65_init+0x0/0x11 @ 1 [ 1.347176] initcall mv88e6123_61_65_init+0x0/0x11 returned 0 after 0 usecs [ 1.347178] calling mv88e6131_init+0x0/0x11 @ 1 [ 1.347182] initcall mv88e6131_init+0x0/0x11 returned 0 after 0 usecs [ 1.347184] calling dsa_init_module+0x0/0xf @ 1 [ 1.347194] initcall dsa_init_module+0x0/0xf returned 0 after 6 usecs [ 1.347196] calling dcbnl_init+0x0/0x4c @ 1 [ 1.347200] initcall dcbnl_init+0x0/0x4c returned 0 after 1 usecs [ 1.347202] calling init_dns_resolver+0x0/0xf7 @ 1 [ 1.347205] Registering the dns_resolver key type [ 1.347214] initcall init_dns_resolver+0x0/0xf7 returned 0 after 7 usecs [ 1.347217] calling rio_init_mports+0x0/0x4e @ 1 [ 1.347222] initcall rio_init_mports+0x0/0x4e returned 0 after 1 usecs [ 1.347224] calling mcheck_debugfs_init+0x0/0x3e @ 1 [ 1.347232] initcall mcheck_debugfs_init+0x0/0x3e returned 0 after 4 usecs [ 1.347235] calling severities_debugfs_init+0x0/0x3e @ 1 [ 1.347240] initcall severities_debugfs_init+0x0/0x3e returned 0 after 2 usecs [ 1.347242] calling hpet_insert_resource+0x0/0x1e @ 1 [ 1.347247] initcall hpet_insert_resource+0x0/0x1e returned 0 after 2 usecs [ 1.347250] calling update_mp_table+0x0/0x15 @ 1 [ 1.347255] initcall update_mp_table+0x0/0x15 returned 0 after 1 usecs [ 1.347257] calling lapic_insert_resource+0x0/0x46 @ 1 [ 1.347261] initcall lapic_insert_resource+0x0/0x46 returned 0 after 1 usecs [ 1.347263] calling io_apic_bug_finalize+0x0/0x1a @ 1 [ 1.347267] initcall io_apic_bug_finalize+0x0/0x1a returned 0 after 1 usecs [ 1.347269] calling print_ipi_mode+0x0/0x2e @ 1 [ 1.347271] Using IPI No-Shortcut mode [ 1.347274] initcall print_ipi_mode+0x0/0x2e returned 0 after 2 usecs [ 1.347277] calling check_early_ioremap_leak+0x0/0x54 @ 1 [ 1.347281] initcall check_early_ioremap_leak+0x0/0x54 returned 0 after 1 usecs [ 1.347283] calling pat_memtype_list_init+0x0/0x37 @ 1 [ 1.347289] initcall pat_memtype_list_init+0x0/0x37 returned 0 after 2 usecs [ 1.347291] calling sched_init_debug+0x0/0x2a @ 1 [ 1.347296] initcall sched_init_debug+0x0/0x2a returned 0 after 2 usecs [ 1.347300] calling init_oops_id+0x0/0x50 @ 1 [ 1.347306] initcall init_oops_id+0x0/0x50 returned 0 after 3 usecs [ 1.347308] calling printk_late_init+0x0/0x56 @ 1 [ 1.347312] initcall printk_late_init+0x0/0x56 returned 0 after 1 usecs [ 1.347313] calling pm_qos_power_init+0x0/0xbd @ 1 [ 1.347358] initcall pm_qos_power_init+0x0/0xbd returned 0 after 39 usecs [ 1.347360] calling test_suspend+0x0/0x8e @ 1 [ 1.347363] initcall test_suspend+0x0/0x8e returned 0 after 1 usecs [ 1.347366] calling software_resume+0x0/0x30 @ 1 [ 1.347369] PM: Hibernation image not present or could not be loaded. [ 1.347372] initcall software_resume+0x0/0x30 returned -2 after 2 usecs [ 1.347375] initcall software_resume+0x0/0x30 returned with error code -2 [ 1.347377] calling debugfs_kprobe_init+0x0/0x90 @ 1 [ 1.347387] initcall debugfs_kprobe_init+0x0/0x90 returned 0 after 6 usecs [ 1.347389] calling taskstats_init+0x0/0x85 @ 1 [ 1.347394] registered taskstats version 1 [ 1.347405] initcall taskstats_init+0x0/0x85 returned 0 after 12 usecs [ 1.347407] calling clear_boot_tracer+0x0/0x2d @ 1 [ 1.347411] initcall clear_boot_tracer+0x0/0x2d returned 0 after 1 usecs [ 1.347413] calling kdb_ftrace_register+0x0/0x35 @ 1 [ 1.347419] initcall kdb_ftrace_register+0x0/0x35 returned 0 after 2 usecs [ 1.347421] calling max_swapfiles_check+0x0/0x7 @ 1 [ 1.347424] initcall max_swapfiles_check+0x0/0x7 returned 0 after 0 usecs [ 1.347427] calling set_recommended_min_free_kbytes+0x0/0x80 @ 1 [ 1.349511] initcall set_recommended_min_free_kbytes+0x0/0x80 returned 0 after 2028 usecs [ 1.349515] calling init_trusted+0x0/0xa4 @ 1 [ 1.349520] async_waiting @ 1 [ 1.349523] async_continuing @ 1 after 1 usec [ 1.350290] async_waiting @ 1 [ 1.350293] async_continuing @ 1 after 0 usec [ 1.350932] initcall init_trusted+0x0/0xa4 returned 0 after 1379 usecs [ 1.350934] calling init_encrypted+0x0/0xf6 @ 1 [ 1.350937] async_waiting @ 1 [ 1.350940] async_continuing @ 1 after 1 usec [ 1.351535] async_waiting @ 1 [ 1.351539] async_continuing @ 1 after 1 usec [ 1.352407] async_waiting @ 1 [ 1.352411] async_continuing @ 1 after 1 usec [ 1.353081] async_waiting @ 1 [ 1.353085] async_continuing @ 1 after 0 usec [ 1.353833] initcall init_encrypted+0x0/0xf6 returned 0 after 2825 usecs [ 1.353836] calling random32_reseed+0x0/0x83 @ 1 [ 1.353852] initcall random32_reseed+0x0/0x83 returned 0 after 13 usecs [ 1.353855] calling pci_resource_alignment_sysfs_init+0x0/0x14 @ 1 [ 1.353862] initcall pci_resource_alignment_sysfs_init+0x0/0x14 returned 0 after 4 usecs [ 1.353864] calling pci_sysfs_init+0x0/0x44 @ 1 [ 1.354083] initcall pci_sysfs_init+0x0/0x44 returned 0 after 210 usecs [ 1.354086] calling boot_wait_for_devices+0x0/0x2f @ 1 [ 1.354090] initcall boot_wait_for_devices+0x0/0x2f returned 0 after 1 usecs [ 1.354092] calling regulator_init_complete+0x0/0x119 @ 1 [ 1.354097] initcall regulator_init_complete+0x0/0x119 returned 0 after 1 usecs [ 1.354099] calling random_int_secret_init+0x0/0x16 @ 1 [ 1.354113] initcall random_int_secret_init+0x0/0x16 returned 0 after 10 usecs [ 1.354116] calling late_resume_init+0x0/0x190 @ 1 [ 1.354119] Magic number: 0:923:347 [ 1.354141] pci0000:00: hash matches [ 1.354152] initcall late_resume_init+0x0/0x190 returned 0 after 32 usecs [ 1.354155] calling scsi_complete_async_scans+0x0/0x120 @ 1 [ 1.354159] initcall scsi_complete_async_scans+0x0/0x120 returned 0 after 1 usecs [ 1.354162] calling rtc_hctosys+0x0/0x102 @ 1 [ 1.354214] rtc_cmos 00:04: setting system clock to 2012-02-06 21:20:38 UTC (1328563238) [ 1.354217] initcall rtc_hctosys+0x0/0x102 returned 0 after 51 usecs [ 1.354220] calling powernowk8_init+0x0/0x17c @ 1 [ 1.354233] initcall powernowk8_init+0x0/0x17c returned -19 after 10 usecs [ 1.354236] calling acpi_cpufreq_init+0x0/0x89 @ 1 [ 1.354744] initcall acpi_cpufreq_init+0x0/0x89 returned 0 after 492 usecs [ 1.354747] calling powernow_init+0x0/0x1f @ 1 [ 1.354751] initcall powernow_init+0x0/0x1f returned -19 after 1 usecs [ 1.354753] calling longhaul_init+0x0/0x90 @ 1 [ 1.354757] initcall longhaul_init+0x0/0x90 returned -19 after 0 usecs [ 1.354759] calling centrino_init+0x0/0x27 @ 1 [ 1.354764] initcall centrino_init+0x0/0x27 returned -16 after 1 usecs [ 1.354766] initcall centrino_init+0x0/0x27 returned with error code -16 [ 1.354768] calling edd_init+0x0/0x182 @ 1 [ 1.354770] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.354771] EDD information not available. [ 1.354774] initcall edd_init+0x0/0x182 returned -19 after 3 usecs [ 1.354776] calling memmap_init+0x0/0x29 @ 1 [ 1.354811] initcall memmap_init+0x0/0x29 returned 0 after 31 usecs [ 1.354813] calling pci_mmcfg_late_insert_resources+0x0/0x4f @ 1 [ 1.354818] initcall pci_mmcfg_late_insert_resources+0x0/0x4f returned 0 after 2 usecs [ 1.354821] calling net_secret_init+0x0/0x16 @ 1 [ 1.354835] initcall net_secret_init+0x0/0x16 returned 0 after 10 usecs [ 1.354837] calling tcp_congestion_default+0x0/0xf @ 1 [ 1.354842] initcall tcp_congestion_default+0x0/0xf returned 0 after 1 usecs [ 1.354844] calling initialize_hashrnd+0x0/0x16 @ 1 [ 1.354850] initcall initialize_hashrnd+0x0/0x16 returned 0 after 2 usecs [ 1.354872] async_waiting @ 1 [ 1.354876] async_continuing @ 1 after 1 usec [ 1.354881] async_waiting @ 1 [ 1.354885] async_continuing @ 1 after 1 usec [ 1.354941] Freeing unused kernel memory: 720k freed [ 1.355047] Write protecting the kernel text: 5524k [ 1.355097] Write protecting the kernel read-only data: 2240k [ 1.355099] NX-protecting the kernel data: 4716k [ 1.372655] udevd[103]: starting version 173 [ 1.393042] ahci 0000:00:1f.2: version 3.0 [ 1.393057] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.393107] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X [ 1.393154] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode [ 1.393157] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 1.393164] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.400417] scsi0 : ahci [ 1.401848] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.401868] r8169 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.401879] scsi1 : ahci [ 1.401915] r8169 0000:05:00.0: setting latency timer to 64 [ 1.401924] r8169 0000:05:00.0: (unregistered net_device): unknown MAC, using family default [ 1.402006] r8169 0000:05:00.0: irq 46 for MSI/MSI-X [ 1.402430] r8169 0000:05:00.0: eth0: RTL8168b/8111b at 0xf842e000, e0:69:95:a6:5b:88, XID 0c900880 IRQ 46 [ 1.402767] scsi2 : ahci [ 1.402937] scsi3 : ahci [ 1.403057] ata1: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505100 irq 45 [ 1.403062] ata2: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505180 irq 45 [ 1.403064] ata3: DUMMY [ 1.403065] ata4: DUMMY [ 1.471880] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.490270] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0). [ 1.490275] atkbd serio0: Use 'setkeycodes 7c ' to make it known. [ 1.635395] usb 1-1: new high speed USB device number 2 using ehci_hcd [ 1.688780] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0). [ 1.688785] atkbd serio0: Use 'setkeycodes 7c ' to make it known. [ 1.719384] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.719410] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.720613] ata1.00: ATA-8: WDC WD3200AAKX-753CA0, 15.01H15, max UDMA/133 [ 1.720618] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.721918] ata1.00: configured for UDMA/133 [ 1.722042] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAKX-7 15.0 PQ: 0 ANSI: 5 [ 1.722145] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.722180] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.722249] sd 0:0:0:0: [sda] Write Protect is off [ 1.722251] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.722281] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.730693] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L633J, D200, max UDMA/100 [ 1.743274] ata2.00: configured for UDMA/100 [ 1.753670] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L633J D200 PQ: 0 ANSI: 5 [ 1.757630] sda: sda1 sda2 < sda5 > [ 1.757897] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.761078] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.761083] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.761176] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.761214] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.767896] hub 1-1:1.0: USB hub found [ 1.768011] hub 1-1:1.0: 4 ports detected [ 1.827317] Refined TSC clocksource calibration: 3092.974 MHz. [ 1.827326] Switching to clocksource tsc [ 1.879302] usb 2-1: new high speed USB device number 2 using ehci_hcd [ 1.888621] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0). [ 1.888626] atkbd serio0: Use 'setkeycodes 7c ' to make it known. [ 1.975758] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 1.975761] EXT4-fs (sda1): write access will be enabled during recovery [ 2.011972] hub 2-1:1.0: USB hub found [ 2.012090] hub 2-1:1.0: 6 ports detected [ 2.041488] EXT4-fs (sda1): recovery complete [ 2.043560] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 2.083541] usb 1-1.2: new high speed USB device number 3 using ehci_hcd [ 2.088750] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0). [ 2.088755] atkbd serio0: Use 'setkeycodes 7c ' to make it known. [ 2.247269] usb 1-1.3: new full speed USB device number 4 using ehci_hcd [ 2.288742] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0). [ 2.288748] atkbd serio0: Use 'setkeycodes 7c ' to make it known. [ 2.411419] usb 1-1.4: new high speed USB device number 5 using ehci_hcd [ 2.488577] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0). [ 2.488583] atkbd serio0: Use 'setkeycodes 7c ' to make it known. [ 2.875316] usb 2-1.1: new low speed USB device number 3 using ehci_hcd [ 4.272361] udevd[335]: starting version 173 [ 4.659565] Adding 4095996k swap on /dev/sda5. Priority:-1 extents:1 across:4095996k [ 5.092131] type=1400 audit(1328563242.237:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=473 comm="apparmor_parser" [ 5.092400] type=1400 audit(1328563242.237:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=473 comm="apparmor_parser" [ 5.092568] type=1400 audit(1328563242.237:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=473 comm="apparmor_parser" [ 5.874357] wmi: Mapper loaded [ 5.990821] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 6.012891] input: Dell AIO WMI hotkeys as /devices/virtual/input/input3 [ 6.037886] Linux video capture interface: v2.00 [ 6.042979] lp: driver loaded but no devices found [ 6.051746] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0). [ 6.051750] atkbd serio0: Use 'setkeycodes 7c ' to make it known. [ 6.076430] input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input4 [ 6.076514] generic-usb 0003:04F2:0402.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:1d.0-1.1/input0 [ 6.097470] input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input5 [ 6.097602] generic-usb 0003:04F2:0402.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:1d.0-1.1/input1 [ 6.097621] usbcore: registered new interface driver usbhid [ 6.097623] usbhid: USB HID core driver [ 6.251676] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0). [ 6.251681] atkbd serio0: Use 'setkeycodes 7c ' to make it known. [ 6.294813] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (04f2:b2a8) [ 6.302518] Bluetooth: Core ver 2.16 [ 6.302536] NET: Registered protocol family 31 [ 6.302538] Bluetooth: HCI device and connection manager initialized [ 6.302540] Bluetooth: HCI socket layer initialized [ 6.302542] Bluetooth: L2CAP socket layer initialized [ 6.302572] Bluetooth: SCO socket layer initialized [ 6.312315] input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input6 [ 6.312351] usbcore: registered new interface driver uvcvideo [ 6.312352] USB Video Class driver (v1.1.0) [ 6.319051] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 6.319252] usbcore: registered new interface driver btusb [ 6.402399] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 6.402625] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.402630] mei 0000:00:16.0: setting latency timer to 64 [ 6.452470] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0). [ 6.452475] atkbd serio0: Use 'setkeycodes 7c ' to make it known. [ 6.625534] [drm] Initialized drm 1.1.0 20060810 [ 7.172108] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.172112] pci 0000:00:02.0: setting latency timer to 64 [ 7.187954] pci 0000:00:02.0: irq 47 for MSI/MSI-X [ 7.187958] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 7.187959] [drm] Driver supports precise vblank timestamp query. [ 7.188064] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 7.188148] acpi device:33: registered as cooling_device4 [ 7.188195] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7 [ 7.188235] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 7.188264] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 7.215551] rts5139: module is from the staging directory, the quality is unknown, you have been warned. [ 7.216035] Initializing rts5139 USB card reader driver... [ 7.219406] scsi4 : SCSI emulation for RTS5139 USB card reader [ 7.219532] usbcore: registered new interface driver rts5139 [ 7.219535] Realtek rts5139 USB card reader support registered. [ 7.219565] scsi 4:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS [ 7.230484] cfg80211: Calling CRDA to update world regulatory domain [ 7.318083] hci_cmd_timer: hci0 command tx timeout [ 7.406273] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 7.407224] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 7.973647] cfg80211: World regulatory domain updated: [ 7.973649] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 7.973651] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7.973653] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 7.973654] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 7.973656] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7.973657] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.309669] ath9k 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 8.309682] ath9k 0000:03:00.0: setting latency timer to 64 [ 8.317863] hci_cmd_timer: hci0 command tx timeout [ 8.360350] ath: EEPROM regdomain: 0x60 [ 8.360351] ath: EEPROM indicates we should expect a direct regpair map [ 8.360353] ath: Country alpha2 being used: 00 [ 8.360354] ath: Regpair used: 0x60 [ 8.360356] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 8.360358] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 8.360359] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 8.360369] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 8.360370] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 8.360372] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 8.360373] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 8.360375] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 8.360376] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 8.360377] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 8.360379] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 8.360380] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 8.360381] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 8.360383] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 8.360384] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 8.360386] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 8.360387] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 8.360389] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 8.360390] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 8.360391] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 8.360393] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 8.360394] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 8.360395] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 8.360397] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 8.360398] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 8.360400] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 8.360401] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 8.360403] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 8.361733] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 8.729266] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control' [ 8.729645] Registered led device: ath9k-phy0 [ 8.729649] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf89a0000, irq=18 [ 9.140619] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 9.298549] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 9.298594] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X [ 9.298621] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 9.317652] hci_cmd_timer: hci0 command tx timeout [ 9.398301] r8169 0000:05:00.0: eth0: link down [ 9.398306] r8169 0000:05:00.0: eth0: link down [ 9.398415] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.463934] hda_codec: ALC269: SKU not ready 0x598301f0 [ 9.464530] hda_codec: ALC269: BIOS auto-probing. [ 9.464743] hda_codec: connection list not available for 0x24 [ 9.468107] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 9.468149] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 10.317530] hci_cmd_timer: hci0 command tx timeout [ 10.361833] init: udev-fallback-graphics main process (853) terminated with status 1 [ 11.317202] hci_cmd_timer: hci0 command tx timeout [ 11.333000] ppdev: user-space parallel port driver [ 11.510075] type=1400 audit(1328563248.653:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=889 comm="apparmor_parser" [ 11.510425] type=1400 audit(1328563248.653:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=889 comm="apparmor_parser" [ 12.316984] hci_cmd_timer: hci0 command tx timeout [ 12.729763] r8169 0000:05:00.0: eth0: link up [ 12.729885] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 13.072422] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 13.316846] hci_cmd_timer: hci0 command tx timeout [ 14.316544] hci_cmd_timer: hci0 command tx timeout [ 15.316324] hci_cmd_timer: hci0 command tx timeout [ 16.013921] wlan0: authenticate with 00:1e:13:6d:56:20 (try 1) [ 16.015772] wlan0: authenticated [ 16.044673] wlan0: associate with 00:1e:13:6d:56:20 (try 1) [ 16.047794] wlan0: RX AssocResp from 00:1e:13:6d:56:20 (capab=0x431 status=0 aid=1) [ 16.047798] wlan0: associated [ 16.048140] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 16.315320] init: ssh main process (849) terminated with status 255 [ 16.316132] hci_cmd_timer: hci0 command tx timeout [ 16.935934] type=1400 audit(1328563254.077:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1026 comm="apparmor_parser" [ 16.936261] type=1400 audit(1328563254.081:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1026 comm="apparmor_parser" [ 16.936431] type=1400 audit(1328563254.081:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1026 comm="apparmor_parser" [ 16.938278] type=1400 audit(1328563254.081:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1030 comm="apparmor_parser" [ 16.938610] type=1400 audit(1328563254.081:11): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1030 comm="apparmor_parser" [ 16.972076] type=1400 audit(1328563254.117:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=1025 comm="apparmor_parser" [ 16.984178] type=1400 audit(1328563254.129:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1029 comm="apparmor_parser" [ 16.984303] type=1400 audit(1328563254.129:14): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1031 comm="apparmor_parser" [ 16.984556] type=1400 audit(1328563254.129:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1029 comm="apparmor_parser" [ 16.991104] type=1400 audit(1328563254.133:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1027 comm="apparmor_parser" [ 17.219532] init: failsafe main process (839) killed by TERM signal [ 17.315889] hci_cmd_timer: hci0 command tx timeout [ 17.321020] init: apport pre-start process (1063) terminated with status 1 [ 17.356995] init: apport post-stop process (1085) terminated with status 1 [ 19.918295] ipmi message handler version 39.2 [ 19.953331] IPMI System Interface driver. [ 19.954682] ipmi_si: Adding default-specified kcs state machine [ 19.954686] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 19.954690] ipmi_si: Interface detection failed [ 20.011314] ipmi_si: Adding default-specified smic state machine [ 20.011317] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 [ 20.011322] ipmi_si: Interface detection failed [ 20.107349] ipmi_si: Adding default-specified bt state machine [ 20.107353] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 [ 20.107358] ipmi_si: Interface detection failed [ 20.176410] ipmi_si: Unable to find any System Interface(s) [ 20.404573] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.404576] Bluetooth: BNEP filters: protocol multicast [ 20.455786] Bluetooth: RFCOMM TTY layer initialized [ 20.455791] Bluetooth: RFCOMM socket layer initialized [ 20.455792] Bluetooth: RFCOMM ver 1.11 [ 21.106522] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 21.430982] hci_cmd_timer: hci0 command tx timeout [ 21.954074] init: plymouth-stop pre-start process (1470) terminated with status 1 [ 22.430761] hci_cmd_timer: hci0 command tx timeout [ 23.290575] eth0: no IPv6 routers present [ 23.434539] hci_cmd_timer: hci0 command tx timeout [ 24.438317] hci_cmd_timer: hci0 command tx timeout [ 25.138501] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 25.438089] hci_cmd_timer: hci0 command tx timeout [ 26.437873] hci_cmd_timer: hci0 command tx timeout [ 26.945772] wlan0: no IPv6 routers present [ 27.437661] hci_cmd_timer: hci0 command tx timeout [ 28.437430] hci_cmd_timer: hci0 command tx timeout [ 29.437212] hci_cmd_timer: hci0 command tx timeout [ 30.436991] hci_cmd_timer: hci0 command tx timeout