[    6.460168] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[    6.461212] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.462064] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    6.479917] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[    6.536739] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[    6.543441] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[    6.609547] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    6.855051] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000
[    6.855059] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    6.905421] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input15
[    8.268821] [drm] Changing LVDS panel from (-hsync, -vsync) to (-hsync, +vsync)
[    8.832706] wlan0: authenticate with c4:10:8a:16:4f:39 (try 1)
[    8.844862] wlan0: authenticated
[    8.858139] wlan0: associate with c4:10:8a:16:4f:39 (try 1)
[    8.862827] wlan0: RX AssocResp from c4:10:8a:16:4f:39 (capab=0x431 status=0 aid=4)
[    8.862831] wlan0: associated
[    8.868330] HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[    8.868383] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[    8.869783] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[    8.924891] ppdev: user-space parallel port driver
[    9.091532] Adding 8177660k swap on /dev/mapper/cryptswap1.  Priority:-1 extents:1 across:8177660k SS
[    9.168476] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[    9.173799] HDMI: detected monitor SMS27A850 at connection type DisplayPort
[    9.173801] HDMI: available speakers: FL/FR
[    9.173805] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[    9.602722] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
[    9.603616] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    9.991714] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   13.505390] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[   13.770717] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input16
[   18.905287] wlan0: no IPv6 routers present
[   20.193409] eth0: no IPv6 routers present
[   43.606605] teredo: no IPv6 routers present
[  254.787253] HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=0
[  254.787326] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[  254.787473] HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[  254.787528] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[  255.087264] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[  255.090846] HDMI: detected monitor SMS27A850 at connection type DisplayPort
[  255.090850] HDMI: available speakers: FL/FR
[  255.090856] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[  259.589106] UDF-fs: Partition marked readonly; forcing readonly mount
[  259.670974] UDF-fs: INFO Mounting volume 'The_Avengers_Vol1_USA_DES', timestamp 2011/03/15 15:23 (1e20)
[  271.995858] audit_printk_skb: 30 callbacks suppressed
[  271.995861] type=1400 audit(1325782350.833:22): apparmor="DENIED" operation="open" parent=2217 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=2218 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  278.326157] [drm] Changing LVDS panel from (-hsync, +vsync) to (-hsync, -vsync)
[  278.605654] HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[  278.605704] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[  278.905544] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[  278.909084] HDMI: detected monitor SMS27A850 at connection type DisplayPort
[  278.909086] HDMI: available speakers: FL/FR
[  278.909089] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[  286.954341] HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=0
[  286.954391] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[  286.954524] HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[  286.954578] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[  287.254418] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[  287.260017] HDMI: detected monitor SMS27A850 at connection type DisplayPort
[  287.260022] HDMI: available speakers: FL/FR
[  287.260029] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[  300.311773] HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[  300.311823] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[  300.611649] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[  300.615209] HDMI: detected monitor SMS27A850 at connection type DisplayPort
[  300.615212] HDMI: available speakers: FL/FR
[  300.615215] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[  316.389775] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[  316.389782] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[  316.953411] HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[  316.953474] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[  317.253363] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[  317.258750] HDMI: detected monitor SMS27A850 at connection type DisplayPort
[  317.258755] HDMI: available speakers: FL/FR
[  317.258762] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[  330.666752] HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[  330.666812] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[  330.966636] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[  330.970198] HDMI: detected monitor SMS27A850 at connection type DisplayPort
[  330.970200] HDMI: available speakers: FL/FR
[  330.970202] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[  340.255986] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[  340.255993] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[  340.819722] HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[  340.819820] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[  341.119725] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[  341.125256] HDMI: detected monitor SMS27A850 at connection type DisplayPort
[  341.125261] HDMI: available speakers: FL/FR
[  341.125268] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[  361.321530] intel ips 0000:00:1f.6: MCP limit exceeded: Avg power 36131, limit 35000
[  364.059164] software-center[2759]: segfault at 8 ip 00000000004dbe38 sp 00007fff6d349c60 error 4 in python2.7[400000+233000]
[  376.035049] HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[  376.035097] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[  376.335019] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[  376.338582] HDMI: detected monitor SMS27A850 at connection type DisplayPort
[  376.338584] HDMI: available speakers: FL/FR
[  376.338588] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[  382.963872] [drm:intel_dp_complete_link_train] *ERROR* failed to train DP, aborting
[  384.019967] [drm:intel_dp_complete_link_train] *ERROR* failed to train DP, aborting
[  406.326097] intel ips 0000:00:1f.6: MCP limit exceeded: Avg power 35786, limit 35000
[  408.406288] HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[  408.406378] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[  408.706212] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[  408.709765] HDMI: detected monitor SMS27A850 at connection type DisplayPort
[  408.709770] HDMI: available speakers: FL/FR
[  408.709775] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[  461.403434] [drm:intel_dp_complete_link_train] *ERROR* failed to train DP, aborting