[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-37-generic (buildd@vernadsky) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #81-Ubuntu SMP Fri Dec 2 20:35:14 UTC 2011 (Ubuntu 2.6.32-37.81-generic 2.6.32.49+drm33.21) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable) [ 0.000000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff70000 (usable) [ 0.000000] BIOS-e820: 000000007ff70000 - 000000007ff7f000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ff7f000 - 000000007ff80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x7ff70 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D1FFF write-protect [ 0.000000] D2000-DBFFF uncachable [ 0.000000] DC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009b800 (usable) [ 0.000000] modified: 000000000009b800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007ff70000 (usable) [ 0.000000] modified: 000000007ff70000 - 000000007ff7f000 (ACPI data) [ 0.000000] modified: 000000007ff7f000 - 000000007ff80000 (ACPI NVS) [ 0.000000] modified: 000000007ff80000 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 37850000 - 37fef613 [ 0.000000] Allocated new RAMDISK: 008e5000 - 01084613 [ 0.000000] Move RAMDISK from 0000000037850000 - 0000000037fef612 to 008e5000 - 01084612 [ 0.000000] ACPI: RSDP 000f6ea0 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 7ff792fd 00034 (v01 PTLTD RSDT 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 7ff7ee3e 00074 (v01 NVIDIA CK8 06040000 PTL_ 000F4240) [ 0.000000] ACPI: DSDT 7ff79331 05B0D (v01 NVIDIA CK8 06040000 MSFT 0100000E) [ 0.000000] ACPI: FACS 7ff7ffc0 00040 [ 0.000000] ACPI: APIC 7ff7eeb2 00050 (v01 NVIDIA NV_APIC_ 06040000 LTP 00000000) [ 0.000000] ACPI: SSDT 7ff7ef02 000D6 (v01 PTLTD POWERNOW 06040000 LTP 00000001) [ 0.000000] ACPI: BOOT 7ff7efd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1159MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008e0f18] TEXT DATA BSS ==> [0000100000 - 00008e0f18] [ 0.000000] #4 [000009b800 - 0000100000] BIOS reserved ==> [000009b800 - 0000100000] [ 0.000000] #5 [00008e1000 - 00008e4154] BRK ==> [00008e1000 - 00008e4154] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008e5000 - 0001084613] NEW RAMDISK ==> [00008e5000 - 0001084613] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0007ff70 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009b [ 0.000000] 0: 0x00000100 -> 0x0007ff70 [ 0.000000] On node 0 totalpages: 524039 [ 0.000000] free_area_init_node: node 0, pgdat c079a800, node_mem_map c1086000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3959 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2319 pages used for memmap [ 0.000000] HighMem zone: 294499 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000 [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ff80000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36312 r0 d21032 u4194304 [ 0.000000] pcpu-alloc: s36312 r0 d21032 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519944 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-37-generic root=UUID=c0efd683-5f06-4a82-80e1-b23fdf8806c5 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 10482880 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0007ff70) [ 0.000000] Memory: 2051768k/2096576k available (4680k kernel code, 43440k reserved, 2122k data, 668k init, 1187272k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a5000 - 0xc084c000 ( 668 kB) [ 0.000000] .data : 0xc0592207 - 0xc07a4dc8 (2122 kB) [ 0.000000] .text : 0xc0100000 - 0xc0592207 (4680 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1795.390 MHz processor. [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3590.78 BogoMIPS (lpj=7181560) [ 0.004032] Security Framework initialized [ 0.004066] AppArmor: AppArmor initialized [ 0.004075] Mount-cache hash table entries: 512 [ 0.004239] Initializing cgroup subsys ns [ 0.004244] Initializing cgroup subsys cpuacct [ 0.004249] Initializing cgroup subsys memory [ 0.004259] Initializing cgroup subsys devices [ 0.004262] Initializing cgroup subsys freezer [ 0.004265] Initializing cgroup subsys net_cls [ 0.004288] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004291] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.004297] mce: CPU supports 5 MCE banks [ 0.004320] Performance Events: AMD PMU driver. [ 0.004328] ... version: 0 [ 0.004331] ... bit width: 48 [ 0.004333] ... generic registers: 4 [ 0.004335] ... value mask: 0000ffffffffffff [ 0.004338] ... max period: 00007fffffffffff [ 0.004340] ... fixed-purpose events: 0 [ 0.004342] ... event mask: 000000000000000f [ 0.004347] Checking 'hlt' instruction... OK. [ 0.020870] SMP alternatives: switching to UP code [ 0.027720] Freeing SMP alternatives: 19k freed [ 0.027737] ACPI: Core revision 20090903 [ 0.036034] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.036052] ftrace: allocating 21734 entries in 43 pages [ 0.040137] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.040485] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.081070] CPU0: AMD Athlon 64 Processor 3000+ stepping 0a [ 0.084001] Brought up 1 CPUs [ 0.084001] Total of 1 processors activated (3590.78 BogoMIPS). [ 0.084001] CPU0 attaching NULL sched-domain. [ 0.084001] devtmpfs: initialized [ 0.084001] regulator: core version 0.5 [ 0.084001] Time: 11:40:06 Date: 01/03/12 [ 0.084001] NET: Registered protocol family 16 [ 0.084001] EISA bus registered [ 0.084001] ACPI: bus type pci registered [ 0.084001] PCI: PCI BIOS revision 2.10 entry at 0xfd69c, last bus=2 [ 0.084001] PCI: Using configuration type 1 for base access [ 0.084001] mtrr: your CPUs had inconsistent fixed MTRR settings [ 0.084001] mtrr: probably your BIOS does not setup all CPUs. [ 0.084001] mtrr: corrected configuration. [ 0.084001] bio: create slab at 0 [ 0.084001] ACPI: EC: Look up EC in DSDT [ 0.092094] ACPI: Interpreter enabled [ 0.092098] ACPI: (supports S0 S3 S4 S5) [ 0.092118] ACPI: Using IOAPIC for interrupt routing [ 0.099801] ACPI: EC: GPE = 0x25, I/O: command/status = 0x66, data = 0x62 [ 0.099967] ACPI: No dock devices found. [ 0.101262] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.101308] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xd8000000-0xdfffffff] [ 0.101394] pci 0000:00:01.1: reg 20 io port: [0x2040-0x207f] [ 0.101399] pci 0000:00:01.1: reg 24 io port: [0x2000-0x203f] [ 0.101411] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.101415] pci 0000:00:01.1: PME# disabled [ 0.101436] pci 0000:00:02.0: reg 10 32bit mmio: [0xd0000000-0xd0000fff] [ 0.101456] pci 0000:00:02.0: supports D1 D2 [ 0.101459] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.101462] pci 0000:00:02.0: PME# disabled [ 0.101479] pci 0000:00:02.1: reg 10 32bit mmio: [0xd0001000-0xd0001fff] [ 0.101499] pci 0000:00:02.1: supports D1 D2 [ 0.101501] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.101504] pci 0000:00:02.1: PME# disabled [ 0.101525] pci 0000:00:02.2: reg 10 32bit mmio: [0xd0004000-0xd00040ff] [ 0.101548] pci 0000:00:02.2: supports D1 D2 [ 0.101551] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.101554] pci 0000:00:02.2: PME# disabled [ 0.101580] pci 0000:00:06.0: reg 10 io port: [0x1400-0x14ff] [ 0.101584] pci 0000:00:06.0: reg 14 io port: [0x1c00-0x1c7f] [ 0.101589] pci 0000:00:06.0: reg 18 32bit mmio: [0xd0002000-0xd0002fff] [ 0.101605] pci 0000:00:06.0: supports D1 D2 [ 0.101622] pci 0000:00:06.1: reg 10 io port: [0x1800-0x18ff] [ 0.101627] pci 0000:00:06.1: reg 14 io port: [0x1c80-0x1cff] [ 0.101631] pci 0000:00:06.1: reg 18 32bit mmio: [0xd0003000-0xd0003fff] [ 0.101648] pci 0000:00:06.1: PME# supported from D3cold [ 0.101651] pci 0000:00:06.1: PME# disabled [ 0.101679] pci 0000:00:08.0: reg 20 io port: [0x2080-0x208f] [ 0.101837] pci 0000:02:06.0: reg 10 32bit mmio: [0xd0100000-0xd010ffff] [ 0.101880] pci 0000:02:06.0: PME# supported from D3hot D3cold [ 0.101884] pci 0000:02:06.0: PME# disabled [ 0.101911] pci 0000:02:07.0: reg 10 32bit mmio: [0xd0116000-0xd0116fff] [ 0.101926] pci 0000:02:07.0: supports D1 D2 [ 0.101928] pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot [ 0.101932] pci 0000:02:07.0: PME# disabled [ 0.101958] pci 0000:02:07.1: reg 10 32bit mmio: [0xd0117000-0xd01177ff] [ 0.101964] pci 0000:02:07.1: reg 14 32bit mmio: [0xd0110000-0xd0113fff] [ 0.101993] pci 0000:02:07.1: supports D1 D2 [ 0.101996] pci 0000:02:07.1: PME# supported from D0 D1 D2 D3hot [ 0.102000] pci 0000:02:07.1: PME# disabled [ 0.102022] pci 0000:02:08.0: reg 10 32bit mmio: [0xd0114000-0xd0115fff] [ 0.102066] pci 0000:00:0a.0: bridge io port: [0x3000-0x3fff] [ 0.102070] pci 0000:00:0a.0: bridge 32bit mmio: [0xd0100000-0xd04fffff] [ 0.102117] pci 0000:01:00.0: reg 10 32bit mmio: [0xd1000000-0xd1ffffff] [ 0.102124] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xe0000000-0xefffffff] [ 0.102145] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.102202] pci 0000:00:0b.0: bridge 32bit mmio: [0xd1000000-0xd1ffffff] [ 0.102207] pci 0000:00:0b.0: bridge 32bit mmio pref: [0xe0000000-0xefffffff] [ 0.102216] pci_bus 0000:00: on NUMA node 0 [ 0.102220] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.102288] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 0.102322] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP0._PRT] [ 0.112709] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19) *0 [ 0.112864] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19) *0 [ 0.113018] ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19) *0 [ 0.113171] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19) *0 [ 0.113324] ACPI: PCI Interrupt Link [LNK5] (IRQs 16 17 18 19) *0 [ 0.113473] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21) *0 [ 0.113632] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21) *0 [ 0.113780] ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21) *0 [ 0.113932] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21) *0 [ 0.114084] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21) *0, disabled. [ 0.114232] ACPI: PCI Interrupt Link [LACI] (IRQs 22) *0 [ 0.114380] ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21) *0 [ 0.114531] ACPI: PCI Interrupt Link [LPID] (IRQs 20 21) *0, disabled. [ 0.114687] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21) *0, disabled. [ 0.114793] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.114796] vgaarb: loaded [ 0.114908] SCSI subsystem initialized [ 0.114955] libata version 3.00 loaded. [ 0.115031] usbcore: registered new interface driver usbfs [ 0.115047] usbcore: registered new interface driver hub [ 0.115073] usbcore: registered new device driver usb [ 0.115195] ACPI: WMI: Mapper loaded [ 0.115197] PCI: Using ACPI for IRQ routing [ 0.115329] NetLabel: Initializing [ 0.115332] NetLabel: domain hash size = 128 [ 0.115333] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.115348] NetLabel: unlabeled traffic allowed by default [ 0.115399] Switching to clocksource tsc [ 0.115999] AppArmor: AppArmor Filesystem Enabled [ 0.115999] pnp: PnP ACPI init [ 0.115999] ACPI: bus type pnp registered [ 0.118177] pnp: PnP ACPI: found 12 devices [ 0.118180] ACPI: ACPI bus type pnp unregistered [ 0.118183] PnPBIOS: Disabled by ACPI PNP [ 0.118197] system 00:00: iomem range 0xffc00000-0xffffffff could not be reserved [ 0.118201] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.118205] system 00:00: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.118209] system 00:00: iomem range 0xfed00000-0xfed00fff has been reserved [ 0.118216] system 00:02: ioport range 0x8000-0x807f has been reserved [ 0.118219] system 00:02: ioport range 0x8080-0x80ff has been reserved [ 0.118223] system 00:02: ioport range 0x8400-0x847f has been reserved [ 0.118226] system 00:02: ioport range 0x8480-0x84ff has been reserved [ 0.118230] system 00:02: ioport range 0x8800-0x887f has been reserved [ 0.118233] system 00:02: ioport range 0x8880-0x88ff has been reserved [ 0.118237] system 00:02: ioport range 0x2040-0x207f has been reserved [ 0.118240] system 00:02: ioport range 0x2000-0x203f has been reserved [ 0.118247] system 00:03: ioport range 0x4d0-0x4d1 has been reserved [ 0.152957] pci 0000:02:07.0: BAR 16: can't allocate mem resource [0xd4000000-0xd04fffff] [ 0.152961] pci 0000:02:07.0: CardBus bridge, secondary bus 0000:03 [ 0.152964] pci 0000:02:07.0: IO window: 0x003000-0x0030ff [ 0.152969] pci 0000:02:07.0: IO window: 0x003400-0x0034ff [ 0.152973] pci 0000:02:07.0: PREFETCH window: 0x80000000-0x83ffffff [ 0.152978] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02 [ 0.152981] pci 0000:00:0a.0: IO window: 0x3000-0x3fff [ 0.152985] pci 0000:00:0a.0: MEM window: 0xd0100000-0xd04fffff [ 0.152989] pci 0000:00:0a.0: PREFETCH window: 0x80000000-0x83ffffff [ 0.152995] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xf0000000-0xefffffff] [ 0.152998] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:01 [ 0.153001] pci 0000:00:0b.0: IO window: disabled [ 0.153006] pci 0000:00:0b.0: MEM window: 0xd1000000-0xd1ffffff [ 0.153010] pci 0000:00:0b.0: PREFETCH window: 0xe0000000-0xefffffff [ 0.153023] pci 0000:00:0a.0: setting latency timer to 64 [ 0.153030] pci 0000:02:07.0: enabling device (0106 -> 0107) [ 0.153263] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 19 [ 0.153267] alloc irq_desc for 19 on node -1 [ 0.153269] alloc kstat_irqs on node -1 [ 0.153278] pci 0000:02:07.0: PCI INT A -> Link[LNK3] -> GSI 19 (level, low) -> IRQ 19 [ 0.153287] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.153290] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.153294] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff] [ 0.153297] pci_bus 0000:02: resource 1 mem: [0xd0100000-0xd04fffff] [ 0.153300] pci_bus 0000:02: resource 2 pref mem [0x80000000-0x83ffffff] [ 0.153304] pci_bus 0000:03: resource 0 io: [0x3000-0x30ff] [ 0.153306] pci_bus 0000:03: resource 1 io: [0x3400-0x34ff] [ 0.153310] pci_bus 0000:03: resource 2 pref mem [0x80000000-0x83ffffff] [ 0.153313] pci_bus 0000:01: resource 1 mem: [0xd1000000-0xd1ffffff] [ 0.153316] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.153354] NET: Registered protocol family 2 [ 0.153457] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.153907] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.155056] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.155631] TCP: Hash tables configured (established 131072 bind 65536) [ 0.155634] TCP reno registered [ 0.155744] NET: Registered protocol family 1 [ 0.692640] pci 0000:01:00.0: Boot video device [ 0.692738] Simple Boot Flag at 0x36 set to 0x1 [ 0.692886] cpufreq-nforce2: No nForce2 chipset. [ 0.692915] Scanning for low memory corruption every 60 seconds [ 0.693053] audit: initializing netlink socket (disabled) [ 0.693072] type=2000 audit(1325590806.692:1): initialized [ 0.704356] Trying to unpack rootfs image as initramfs... [ 0.717004] highmem bounce pool size: 64 pages [ 0.717013] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.724822] VFS: Disk quotas dquot_6.5.2 [ 0.724895] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.725569] fuse init (API version 7.13) [ 0.725661] msgmni has been set to 1690 [ 0.725894] alg: No test for stdrng (krng) [ 0.725958] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.725962] io scheduler noop registered [ 0.725964] io scheduler anticipatory registered [ 0.725966] io scheduler deadline registered [ 0.726007] io scheduler cfq registered (default) [ 0.726140] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.726164] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.728245] ACPI: AC Adapter [ACAD] (on-line) [ 0.728323] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.728328] ACPI: Power Button [PWRB] [ 0.728377] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.728422] ACPI: Lid Switch [LID] [ 0.728471] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.728474] ACPI: Sleep Button [SLPB] [ 0.728519] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.728522] ACPI: Power Button [PWRF] [ 0.728734] Marking TSC unstable due to TSC halts in idle [ 0.728779] processor LNXCPU:00: registered as cooling_device0 [ 0.733156] Switching to clocksource acpi_pm [ 0.736912] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.736925] ACPI: Thermal Zone [THRM] (54 C) [ 0.738582] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.738752] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A [ 0.739402] ACPI: PCI Interrupt Link [LMCI] enabled at IRQ 21 [ 0.739408] alloc irq_desc for 21 on node -1 [ 0.739411] alloc kstat_irqs on node -1 [ 0.739422] serial 0000:00:06.1: PCI INT B -> Link[LMCI] -> GSI 21 (level, low) -> IRQ 21 [ 0.739429] serial 0000:00:06.1: PCI INT B disabled [ 0.741301] brd: module loaded [ 0.744295] ACPI: Battery Slot [BAT1] (battery absent) [ 0.744308] isapnp: Scanning for PnP cards... [ 0.750267] loop: module loaded [ 0.750382] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.750592] pata_acpi 0000:00:08.0: setting latency timer to 64 [ 0.750925] Fixed MDIO Bus: probed [ 0.750962] PPP generic driver version 2.4.2 [ 0.750998] tun: Universal TUN/TAP device driver, 1.6 [ 0.751000] tun: (C) 1999-2004 Max Krasnyansky [ 0.751081] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.751335] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20 [ 0.751341] alloc irq_desc for 20 on node -1 [ 0.751343] alloc kstat_irqs on node -1 [ 0.751353] ehci_hcd 0000:00:02.2: PCI INT C -> Link[LUS2] -> GSI 20 (level, low) -> IRQ 20 [ 0.751373] ehci_hcd 0000:00:02.2: setting latency timer to 64 [ 0.751377] ehci_hcd 0000:00:02.2: EHCI Host Controller [ 0.751413] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 [ 0.751445] ehci_hcd 0000:00:02.2: debug port 1 [ 0.751451] ehci_hcd 0000:00:02.2: cache line size of 64 is not supported [ 0.751470] ehci_hcd 0000:00:02.2: irq 20, io mem 0xd0004000 [ 0.799646] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00 [ 0.799750] usb usb1: configuration #1 chosen from 1 choice [ 0.799783] hub 1-0:1.0: USB hub found [ 0.799796] hub 1-0:1.0: 6 ports detected [ 0.799862] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.800139] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 21 [ 0.800144] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 21 (level, low) -> IRQ 21 [ 0.800157] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.800160] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.800197] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.800223] ohci_hcd 0000:00:02.0: irq 21, io mem 0xd0000000 [ 0.889611] usb usb2: configuration #1 chosen from 1 choice [ 0.889653] hub 2-0:1.0: USB hub found [ 0.889669] hub 2-0:1.0: 3 ports detected [ 0.890030] ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 20 [ 0.890037] ohci_hcd 0000:00:02.1: PCI INT B -> Link[LUS1] -> GSI 20 (level, low) -> IRQ 20 [ 0.890058] ohci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.890062] ohci_hcd 0000:00:02.1: OHCI Host Controller [ 0.890106] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 [ 0.890129] ohci_hcd 0000:00:02.1: irq 20, io mem 0xd0001000 [ 0.977648] usb usb3: configuration #1 chosen from 1 choice [ 0.977690] hub 3-0:1.0: USB hub found [ 0.977706] hub 3-0:1.0: 3 ports detected [ 0.977772] uhci_hcd: USB Universal Host Controller Interface driver [ 0.977882] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.985247] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.985256] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.985407] mice: PS/2 mouse device common for all mice [ 0.985630] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.985654] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 0.985768] device-mapper: uevent: version 1.0.3 [ 0.985906] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.988133] device-mapper: multipath: version 1.1.0 loaded [ 0.988136] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.988757] EISA: Probing bus 0 at eisa.0 [ 0.988765] Cannot allocate resource for EISA slot 1 [ 0.988767] Cannot allocate resource for EISA slot 2 [ 0.988770] Cannot allocate resource for EISA slot 3 [ 0.988780] Cannot allocate resource for EISA slot 8 [ 0.988783] EISA: Detected 0 cards. [ 0.992247] cpuidle: using governor ladder [ 0.992296] cpuidle: using governor menu [ 0.992746] TCP cubic registered [ 0.992922] NET: Registered protocol family 10 [ 0.993860] NET: Registered protocol family 17 [ 0.993896] powernow-k8: Found 1 AMD Athlon 64 Processor 3000+ processors (1 cpu cores) (version 2.20.00) [ 0.993951] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x2 [ 0.993954] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x6 [ 0.993957] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x12 [ 0.994003] Using IPI No-Shortcut mode [ 0.994103] PM: Resume from disk failed. [ 0.994118] registered taskstats version 1 [ 0.994368] Magic number: 12:490:680 [ 0.994474] rtc_cmos 00:06: setting system clock to 2012-01-03 11:40:07 UTC (1325590807) [ 0.994478] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.994480] EDD information not available. [ 1.018426] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 1.247647] Freeing initrd memory: 7805k freed [ 1.343664] isapnp: No Plug & Play device found [ 1.343698] Freeing unused kernel memory: 668k freed [ 1.344585] Write protecting the kernel text: 4684k [ 1.344619] Write protecting the kernel read-only data: 1844k [ 1.366591] udev: starting version 151 [ 1.516067] usb 2-3: new full speed USB device using ohci_hcd and address 2 [ 1.588707] pata_amd 0000:00:08.0: version 0.4.1 [ 1.588775] pata_amd 0000:00:08.0: setting latency timer to 64 [ 1.589131] scsi0 : pata_amd [ 1.589305] scsi1 : pata_amd [ 1.589515] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2080 irq 14 [ 1.589519] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2088 irq 15 [ 1.602831] tg3.c:v3.102 (September 1, 2009) [ 1.603110] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 18 [ 1.603116] alloc irq_desc for 18 on node -1 [ 1.603119] alloc kstat_irqs on node -1 [ 1.603129] tg3 0000:02:06.0: PCI INT A -> Link[LNK2] -> GSI 18 (level, low) -> IRQ 18 [ 1.683195] eth0: Tigon3 [partno(BCM95788A50) rev 3003] (PCI:33MHz:32-bit) MAC address 00:c0:9f:3c:fa:42 [ 1.683200] eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[0]) [ 1.683204] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.683207] eth0: dma_rwctrl[763f0000] dma_mask[32-bit] [ 1.683472] ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 17 [ 1.683477] alloc irq_desc for 17 on node -1 [ 1.683479] alloc kstat_irqs on node -1 [ 1.683489] b43-pci-bridge 0000:02:08.0: PCI INT A -> Link[LNK4] -> GSI 17 (level, low) -> IRQ 17 [ 1.687127] ssb: Sonics Silicon Backplane found on PCI device 0000:02:08.0 [ 1.752533] ata1.00: ATA-6: IC25N060ATMR04-0, MO3OAD4A, max UDMA/100 [ 1.752537] ata1.00: 117210240 sectors, multi 16: LBA48 [ 1.752566] ata1: nv_mode_filter: 0x3f39f&0x7f39f->0x3f39f, BIOS=0x3f000 (0xc600c000) ACPI=0x7f01f (8:8:0x1b) [ 1.768466] ata1.00: configured for UDMA/100 [ 1.768604] scsi 0:0:0:0: Direct-Access ATA IC25N060ATMR04-0 MO3O PQ: 0 ANSI: 5 [ 1.768781] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.769096] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 1.769146] sd 0:0:0:0: [sda] Write Protect is off [ 1.769150] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.769176] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.769316] sda: [ 1.775561] usb 2-3: configuration #1 chosen from 1 choice [ 1.789532] Initializing USB Mass Storage driver... [ 1.789655] scsi2 : SCSI emulation for USB Mass Storage devices [ 1.789800] usbcore: registered new interface driver usb-storage [ 1.789803] USB Mass Storage support registered. [ 1.789896] usb-storage: device found at 2 [ 1.789898] usb-storage: waiting for device to settle before scanning [ 1.794250] sda1 sda2 sda3 [ 1.825470] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.932429] ata2.00: ATAPI: MATSHITADVD-RAM UJ-820S, 1.00, max UDMA/33 [ 1.932460] ata2: nv_mode_filter: 0x739f&0x7f39f->0x739f, BIOS=0x7000 (0xc600c000) ACPI=0x7f01f (8:8:0x1b) [ 1.948364] ata2.00: configured for UDMA/33 [ 1.950550] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-820S 1.00 PQ: 0 ANSI: 5 [ 1.954805] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.954809] Uniform CD-ROM driver Revision: 3.20 [ 1.954909] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.954973] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.959084] ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 16 [ 1.959091] alloc irq_desc for 16 on node -1 [ 1.959093] alloc kstat_irqs on node -1 [ 1.959105] ohci1394 0000:02:07.1: PCI INT B -> Link[LNK5] -> GSI 16 (level, low) -> IRQ 16 [ 2.012083] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[d0117000-d01177ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 2.415502] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 3.284163] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f000018ec65] [ 6.789554] usb-storage: device scan complete [ 6.796520] scsi 2:0:0:0: Direct-Access Generic Flash R/W 2002 PQ: 0 ANSI: 2 [ 6.796562] scsi: killing requests for dead queue [ 6.796601] scsi: killing requests for dead queue [ 6.796636] scsi: killing requests for dead queue [ 6.796669] scsi: killing requests for dead queue [ 6.796702] scsi: killing requests for dead queue [ 6.796735] scsi: killing requests for dead queue [ 6.796771] scsi: killing requests for dead queue [ 6.796804] scsi: killing requests for dead queue [ 6.797006] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 6.818500] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 31.795968] udev: starting version 151 [ 31.868551] Adding 976888k swap on /dev/sda3. Priority:-1 extents:1 across:976888k [ 31.977485] lp: driver loaded but no devices found [ 32.015953] i2c i2c-0: nForce2 SMBus adapter at 0x2040 [ 32.015980] i2c i2c-1: nForce2 SMBus adapter at 0x2000 [ 32.024109] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 32.192183] Linux agpgart interface v0.103 [ 32.268455] parport_pc 00:0b: reported by Plug and Play ACPI [ 32.268568] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 32.357885] lp0: using parport0 (interrupt-driven). [ 32.360174] irda_init() [ 32.360198] NET: Registered protocol family 23 [ 32.399365] vga16fb: initializing [ 32.399372] vga16fb: mapped to 0xc00a0000 [ 32.399448] fb0: VGA16 VGA frame buffer device [ 32.401297] acer-wmi: Acer Laptop ACPI-WMI Extras [ 32.401311] acer-wmi: No or unsupported WMI interface, unable to load [ 32.404059] agpgart-amd64 0000:00:00.0: AGP bridge [10de/00d1] [ 32.404067] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB [ 32.404074] agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP [ 32.412103] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:0e/LNXVIDEO:00/input/input6 [ 32.412232] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 32.436337] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xd8000000 [ 32.542972] nvidia: module license 'NVIDIA' taints kernel. [ 32.542977] Disabling lock debugging due to kernel taint [ 33.010429] type=1505 audit(1325590839.513:2): operation="profile_load" pid=535 name="/sbin/dhclient3" [ 33.010774] type=1505 audit(1325590839.513:3): operation="profile_load" pid=535 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 33.010970] type=1505 audit(1325590839.513:4): operation="profile_load" pid=535 name="/usr/lib/connman/scripts/dhclient-script" [ 33.417662] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 33.417911] nsc-ircc, chip->init [ 33.417924] nsc-ircc, Found chip at base=0x04e [ 33.417949] nsc-ircc, driver loaded (Dag Brattli) [ 33.418133] nsc_ircc_open(), can't get iobase of 0x2f8 [ 33.418172] nsc-ircc, Found chip at base=0x04e [ 33.418197] nsc-ircc, driver loaded (Dag Brattli) [ 33.418200] nsc_ircc_open(), can't get iobase of 0x2f8 [ 33.419019] nsc-ircc 00:0a: disabled [ 33.420555] ppdev: user-space parallel port driver [ 33.422664] cfg80211: Calling CRDA to update world regulatory domain [ 33.427374] yenta_cardbus 0000:02:07.0: CardBus bridge found [1025:0059] [ 33.427394] yenta_cardbus 0000:02:07.0: Using CSCINT to route CSC interrupts to PCI [ 33.427397] yenta_cardbus 0000:02:07.0: Routing CardBus interrupts to PCI [ 33.427403] yenta_cardbus 0000:02:07.0: TI: mfunc 0x007c1b22, devctl 0x44 [ 33.644061] Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006/0x0 [ 33.645357] cfg80211: World regulatory domain updated: [ 33.645360] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 33.645364] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 33.645367] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 33.645369] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 33.645372] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 33.645375] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 33.668918] b43-phy0: Broadcom 4306 WLAN found (core revision 5) [ 33.693426] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 33.752049] phy0: Selected rate control algorithm 'minstrel' [ 33.752903] Registered led device: b43-phy0::tx [ 33.752921] Registered led device: b43-phy0::rx [ 33.752938] Registered led device: b43-phy0::radio [ 33.753021] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] [ 33.772716] yenta_cardbus 0000:02:07.0: ISA IRQ mask 0x0c78, PCI irq 19 [ 33.772721] yenta_cardbus 0000:02:07.0: Socket status: 30000086 [ 33.772725] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06 [ 33.772735] yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff [ 33.772740] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: clean. [ 33.772926] yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge Memory window: 0xd0100000 - 0xd04fffff [ 33.772930] yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff [ 33.826574] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 22 [ 33.826581] alloc irq_desc for 22 on node -1 [ 33.826584] alloc kstat_irqs on node -1 [ 33.826595] Intel ICH 0000:00:06.0: PCI INT A -> Link[LACI] -> GSI 22 (level, low) -> IRQ 22 [ 33.826627] Intel ICH 0000:00:06.0: setting latency timer to 64 [ 33.905376] Console: switching to colour frame buffer device 80x30 [ 33.931861] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 33.931873] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 33.932417] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 19 [ 33.932424] nvidia 0000:01:00.0: PCI INT A -> Link[LNK1] -> GSI 19 (level, low) -> IRQ 19 [ 33.933386] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.22 Sun Nov 8 20:26:31 PST 2009 [ 34.126657] type=1505 audit(1325590840.629:5): operation="profile_load" pid=721 name="/usr/share/gdm/guest-session/Xsession" [ 34.132800] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 34.134085] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 34.134840] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 34.135471] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 34.136496] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 34.140799] type=1505 audit(1325590840.645:6): operation="profile_replace" pid=722 name="/sbin/dhclient3" [ 34.141164] type=1505 audit(1325590840.645:7): operation="profile_replace" pid=722 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 34.141364] type=1505 audit(1325590840.645:8): operation="profile_replace" pid=722 name="/usr/lib/connman/scripts/dhclient-script" [ 34.179656] type=1505 audit(1325590840.681:9): operation="profile_load" pid=723 name="/usr/bin/evince" [ 34.241356] type=1505 audit(1325590840.745:10): operation="profile_load" pid=723 name="/usr/bin/evince-previewer" [ 34.244208] type=1505 audit(1325590840.749:11): operation="profile_load" pid=723 name="/usr/bin/evince-thumbnailer" [ 34.258348] tg3 0000:02:06.0: firmware: requesting tigon/tg3_tso5.bin [ 34.593090] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 34.620079] b43 ssb0:0: firmware: requesting b43/ucode5.fw [ 34.625686] b43 ssb0:0: firmware: requesting b43/pcm5.fw [ 34.631730] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw [ 34.638003] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw [ 34.706089] intel8x0_measure_ac97_clock: measured 112424 usecs (5424 samples) [ 34.706094] intel8x0: clocking to 48000 [ 34.760058] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 34.829843] ADDRCONF(NETDEV_UP): wlan0: link is not ready