[ 36.295403] eth0: no IPv6 routers present [ 37.948413] wlan0: no IPv6 routers present [ 287.647665] cfg80211: All devices are disconnected, going to restore regulatory settings [ 287.647686] cfg80211: Restoring regulatory settings [ 287.647732] cfg80211: Calling CRDA to update world regulatory domain [ 287.656835] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 287.656845] cfg80211: World regulatory domain updated: [ 287.656849] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 287.656856] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 287.656863] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 287.656869] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 287.656875] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 287.656881] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 288.391861] wlan0: authenticate with 00:22:90:50:1a:50 (try 1) [ 288.407532] wlan0: authenticated [ 288.430680] wlan0: associate with 00:22:90:50:1a:50 (try 1) [ 288.575612] wlan0: RX ReassocResp from 00:22:90:50:1a:50 (capab=0x431 status=0 aid=6) [ 288.575622] wlan0: associated [ 356.590518] cfg80211: All devices are disconnected, going to restore regulatory settings [ 356.590532] cfg80211: Restoring regulatory settings [ 356.590543] cfg80211: Calling CRDA to update world regulatory domain [ 356.599730] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 356.599743] cfg80211: World regulatory domain updated: [ 356.599748] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 356.599760] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 356.599768] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 356.599775] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 356.599781] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 356.599787] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 357.351400] wlan0: authenticate with 00:22:90:50:1a:50 (try 1) [ 357.379262] wlan0: authenticated [ 357.391000] wlan0: associate with 00:22:90:50:1a:50 (try 1) [ 357.445084] wlan0: RX ReassocResp from 00:22:90:50:1a:50 (capab=0x431 status=0 aid=6) [ 357.445088] wlan0: associated [ 357.902004] wlan0: deauthenticated from 00:22:90:50:1a:50 (Reason: 23) [ 358.009548] cfg80211: All devices are disconnected, going to restore regulatory settings [ 358.009566] cfg80211: Restoring regulatory settings [ 358.009580] cfg80211: Calling CRDA to update world regulatory domain [ 358.018065] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 358.018075] cfg80211: World regulatory domain updated: [ 358.018079] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 358.018087] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 358.018093] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 358.018099] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 358.018105] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 358.018111] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 358.843784] wlan0: authenticate with 00:22:90:50:1a:50 (try 1) [ 358.859946] wlan0: authenticated [ 358.871580] wlan0: associate with 00:22:90:50:1a:50 (try 1) [ 358.897671] wlan0: RX ReassocResp from 00:22:90:50:1a:50 (capab=0x431 status=0 aid=6) [ 358.897676] wlan0: associated [ 1465.867731] cfg80211: All devices are disconnected, going to restore regulatory settings [ 1465.867747] cfg80211: Restoring regulatory settings [ 1465.867757] cfg80211: Calling CRDA to update world regulatory domain [ 1465.876231] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 1465.876241] cfg80211: World regulatory domain updated: [ 1465.876245] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1465.876253] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1465.876259] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1465.876265] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1465.876271] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1465.876277] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1466.612749] wlan0: authenticate with 00:22:90:50:1a:50 (try 1) [ 1466.640619] wlan0: authenticated [ 1466.640971] wlan0: associate with 00:22:90:50:1a:50 (try 1) [ 1466.642988] wlan0: RX ReassocResp from 00:22:90:50:1a:50 (capab=0x431 status=0 aid=6) [ 1466.643000] wlan0: associated [ 1616.645673] cfg80211: All devices are disconnected, going to restore regulatory settings [ 1616.645690] cfg80211: Restoring regulatory settings [ 1616.645735] cfg80211: Calling CRDA to update world regulatory domain [ 1616.654367] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 1616.654377] cfg80211: World regulatory domain updated: [ 1616.654381] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1616.654388] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1616.654395] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1616.654400] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1616.654406] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1616.654412] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1617.424260] wlan0: authenticate with 00:22:90:50:1a:50 (try 1) [ 1617.427607] wlan0: authenticated [ 1617.462137] wlan0: associate with 00:22:90:50:1a:50 (try 1) [ 1617.466636] wlan0: RX ReassocResp from 00:22:90:50:1a:50 (capab=0x431 status=0 aid=6) [ 1617.466641] wlan0: associated [ 3022.917280] type=1400 audit(1331905384.724:32): apparmor="STATUS" operation="profile_replace" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=8035 comm="apparmor_parser" [ 3023.283113] type=1400 audit(1331905385.092:33): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=8036 comm="apparmor_parser" [ 3023.283250] type=1400 audit(1331905385.092:34): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=8036 comm="apparmor_parser" [ 3023.283339] type=1400 audit(1331905385.092:35): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=8036 comm="apparmor_parser" [ 3023.637462] type=1400 audit(1331905385.444:36): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=8041 comm="apparmor_parser" [ 3023.988720] type=1400 audit(1331905385.796:37): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=8040 comm="apparmor_parser" [ 3023.989118] type=1400 audit(1331905385.796:38): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=8040 comm="apparmor_parser" [ 3023.996081] type=1400 audit(1331905385.804:39): apparmor="STATUS" operation="profile_replace" name="/usr/lib/telepathy/mission-control-5" pid=8039 comm="apparmor_parser" [ 3023.996444] type=1400 audit(1331905385.804:40): apparmor="STATUS" operation="profile_replace" name="/usr/lib/telepathy/telepathy-*" pid=8039 comm="apparmor_parser" [ 3024.013872] type=1400 audit(1331905385.824:41): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/tcpdump" pid=8043 comm="apparmor_parser" [ 3030.625325] type=1400 audit(1331905392.444:42): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince" pid=8037 comm="apparmor_parser" [ 3030.626059] type=1400 audit(1331905392.444:43): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince//launchpad_integration" pid=8037 comm="apparmor_parser" [ 3030.626363] type=1400 audit(1331905392.444:44): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince//sanitized_helper" pid=8037 comm="apparmor_parser" [ 3030.626967] type=1400 audit(1331905392.444:45): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer" pid=8037 comm="apparmor_parser" [ 3030.627461] type=1400 audit(1331905392.444:46): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer//launchpad_integration" pid=8037 comm="apparmor_parser" [ 3030.627911] type=1400 audit(1331905392.448:47): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer//sanitized_helper" pid=8037 comm="apparmor_parser" [ 3030.628343] type=1400 audit(1331905392.448:48): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-thumbnailer" pid=8037 comm="apparmor_parser" [ 3030.628657] type=1400 audit(1331905392.448:49): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=8037 comm="apparmor_parser" [ 3030.992513] type=1400 audit(1331905392.812:50): apparmor="STATUS" operation="profile_replace" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=8093 comm="apparmor_parser" [ 3031.498419] type=1400 audit(1331905393.320:51): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=8094 comm="apparmor_parser" [ 3038.439102] audit_printk_skb: 24 callbacks suppressed [ 3038.439105] type=1400 audit(1331905400.268:60): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince" pid=8095 comm="apparmor_parser" [ 3038.439762] type=1400 audit(1331905400.268:61): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince//launchpad_integration" pid=8095 comm="apparmor_parser" [ 3038.440026] type=1400 audit(1331905400.272:62): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince//sanitized_helper" pid=8095 comm="apparmor_parser" [ 3038.440601] type=1400 audit(1331905400.272:63): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer" pid=8095 comm="apparmor_parser" [ 3038.441072] type=1400 audit(1331905400.272:64): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer//launchpad_integration" pid=8095 comm="apparmor_parser" [ 3038.441305] type=1400 audit(1331905400.272:65): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer//sanitized_helper" pid=8095 comm="apparmor_parser" [ 3038.441717] type=1400 audit(1331905400.272:66): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-thumbnailer" pid=8095 comm="apparmor_parser" [ 3038.442032] type=1400 audit(1331905400.272:67): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=8095 comm="apparmor_parser" [ 3653.548028] cfg80211: All devices are disconnected, going to restore regulatory settings [ 3653.548040] cfg80211: Restoring regulatory settings [ 3653.548082] cfg80211: Calling CRDA to update world regulatory domain [ 3653.557476] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 3653.557485] cfg80211: World regulatory domain updated: [ 3653.557489] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3653.557497] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3653.557504] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 3653.557509] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 3653.557515] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3653.557521] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3654.358145] wlan0: authenticate with 00:22:90:50:1a:50 (try 1) [ 3654.362098] wlan0: authenticated [ 3654.386540] wlan0: associate with 00:22:90:50:1a:50 (try 1) [ 3654.462583] wlan0: RX ReassocResp from 00:22:90:50:1a:50 (capab=0x431 status=0 aid=6) [ 3654.462593] wlan0: associated [ 5773.957931] usb 3-1: new low-speed USB device number 2 using xhci_hcd [ 5774.002455] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 5774.097301] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1c.4/0000:0b:00.0/usb3/3-1/3-1:1.0/input/input10 [ 5774.097745] generic-usb 0003:192F:0416.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:0b:00.0-1/input0 [ 5774.097803] usbcore: registered new interface driver usbhid [ 5774.097810] usbhid: USB HID core driver [ 5909.779556] usb 3-2: new high-speed USB device number 3 using xhci_hcd [ 5909.809115] usb 3-2: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes [ 5909.809130] usb 3-2: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes [ 5909.809921] scsi7 : usb-storage 3-2:1.0 [ 5910.807690] scsi 7:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 CCS [ 5910.809308] sd 7:0:0:0: Attached scsi generic sg1 type 0 [ 5910.809834] sd 7:0:0:0: [sdb] 7954432 512-byte logical blocks: (4.07 GB/3.79 GiB) [ 5910.810254] sd 7:0:0:0: [sdb] Write Protect is off [ 5910.810268] sd 7:0:0:0: [sdb] Mode Sense: 4b 00 00 08 [ 5910.810996] sd 7:0:0:0: [sdb] No Caching mode page present [ 5910.811004] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 5910.814902] sd 7:0:0:0: [sdb] No Caching mode page present [ 5910.814910] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 5910.817305] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 > [ 5910.819632] sd 7:0:0:0: [sdb] No Caching mode page present [ 5910.819645] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 5910.819655] sd 7:0:0:0: [sdb] Attached SCSI removable disk [ 5911.353281] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null) [ 5911.500892] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) [ 5913.517963] EXT4-fs (sdb5): recovery complete [ 5913.543985] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null) [ 6037.114183] usb 2-1.2: new full-speed USB device number 5 using ehci_hcd [ 6037.299975] usbcore: registered new interface driver usbserial [ 6037.300007] USB Serial support registered for generic [ 6037.300073] usbcore: registered new interface driver usbserial_generic [ 6037.300077] usbserial: USB Serial Driver core [ 6037.306690] USB Serial support registered for FTDI USB Serial Device [ 6037.307048] ftdi_sio 2-1.2:1.0: FTDI USB Serial Device converter detected [ 6037.307151] usb 2-1.2: Detected FT232RL [ 6037.307159] usb 2-1.2: Number of endpoints 2 [ 6037.307165] usb 2-1.2: Endpoint 1 MaxPacketSize 64 [ 6037.307172] usb 2-1.2: Endpoint 2 MaxPacketSize 64 [ 6037.307179] usb 2-1.2: Setting MaxPacketSize 64 [ 6037.307617] usb 2-1.2: FTDI USB Serial Device converter now attached to ttyUSB0 [ 6037.307666] usbcore: registered new interface driver ftdi_sio [ 6037.307672] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver [ 7176.457871] usb 2-1.2: USB disconnect, device number 5 [ 7176.458331] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 [ 7176.458353] ftdi_sio 2-1.2:1.0: device disconnected [ 7180.174982] r8169 0000:05:00.0: eth0: link down [ 7184.244237] usb 3-1: USB disconnect, device number 2 [ 7184.511430] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7210.168113] r8169 0000:05:00.0: eth0: link up [ 7210.168855] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 7217.951271] usb 3-1: new low-speed USB device number 4 using xhci_hcd [ 7217.995541] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 7218.016538] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1c.4/0000:0b:00.0/usb3/3-1/3-1:1.0/input/input11 [ 7218.017049] generic-usb 0003:192F:0416.0002: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:0b:00.0-1/input0 [ 7220.507665] eth0: no IPv6 routers present [ 7374.215908] cfg80211: All devices are disconnected, going to restore regulatory settings [ 7374.215922] cfg80211: Restoring regulatory settings [ 7374.215965] cfg80211: Calling CRDA to update world regulatory domain [ 7374.235071] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 7374.235080] cfg80211: World regulatory domain updated: [ 7374.235085] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 7374.235092] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7374.235099] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 7374.235104] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 7374.235110] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7374.235116] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7375.066220] wlan0: authenticate with 00:22:90:50:1a:50 (try 1) [ 7375.070372] wlan0: authenticated [ 7375.083648] wlan0: associate with 00:22:90:50:1a:50 (try 1) [ 7375.113053] wlan0: RX ReassocResp from 00:22:90:50:1a:50 (capab=0x431 status=0 aid=5) [ 7375.113063] wlan0: associated [ 7492.424485] usb 3-2: USB disconnect, device number 3 [ 7514.838779] usb 2-1.2: new full-speed USB device number 6 using ehci_hcd [ 7514.940418] ftdi_sio 2-1.2:1.0: FTDI USB Serial Device converter detected [ 7514.940505] usb 2-1.2: Detected FT232RL [ 7514.940512] usb 2-1.2: Number of endpoints 2 [ 7514.940519] usb 2-1.2: Endpoint 1 MaxPacketSize 64 [ 7514.940527] usb 2-1.2: Endpoint 2 MaxPacketSize 64 [ 7514.940534] usb 2-1.2: Setting MaxPacketSize 64 [ 7514.940971] usb 2-1.2: FTDI USB Serial Device converter now attached to ttyUSB0 [ 7713.510507] usb 2-1.2: USB disconnect, device number 6 [ 7713.511118] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 [ 7713.511153] ftdi_sio 2-1.2:1.0: device disconnected [ 8190.172800] usb 3-2: new high-speed USB device number 5 using xhci_hcd [ 8190.202182] usb 3-2: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes [ 8190.202195] usb 3-2: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes [ 8190.202942] scsi8 : usb-storage 3-2:1.0 [ 8191.200927] scsi 8:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 CCS [ 8191.203329] sd 8:0:0:0: Attached scsi generic sg1 type 0 [ 8191.203896] sd 8:0:0:0: [sdb] 15523840 512-byte logical blocks: (7.94 GB/7.40 GiB) [ 8191.204234] sd 8:0:0:0: [sdb] Write Protect is off [ 8191.204243] sd 8:0:0:0: [sdb] Mode Sense: 4b 00 00 08 [ 8191.204597] sd 8:0:0:0: [sdb] No Caching mode page present [ 8191.204607] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 8191.209787] sd 8:0:0:0: [sdb] No Caching mode page present [ 8191.209797] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 8191.219681] sdb: sdb1 sdb2 [ 8191.221298] sd 8:0:0:0: [sdb] No Caching mode page present [ 8191.221306] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 8191.221313] sd 8:0:0:0: [sdb] Attached SCSI removable disk [ 8191.666025] EXT4-fs (sdb2): recovery complete [ 8191.668120] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) [ 8385.645935] cfg80211: All devices are disconnected, going to restore regulatory settings [ 8385.645941] cfg80211: Restoring regulatory settings [ 8385.645961] cfg80211: Calling CRDA to update world regulatory domain [ 8385.668294] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 8385.668305] cfg80211: World regulatory domain updated: [ 8385.668308] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8385.668316] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8385.668323] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8385.668329] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8385.668334] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8385.668340] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8386.455251] wlan0: authenticate with 00:22:90:50:1a:50 (try 1) [ 8386.546214] wlan0: authenticated [ 8386.546620] wlan0: associate with 00:22:90:50:1a:50 (try 1) [ 8386.583151] wlan0: RX ReassocResp from 00:22:90:50:1a:50 (capab=0x431 status=0 aid=5) [ 8386.583160] wlan0: associated [ 8744.235894] cfg80211: All devices are disconnected, going to restore regulatory settings [ 8744.235900] cfg80211: Restoring regulatory settings [ 8744.235904] cfg80211: Calling CRDA to update world regulatory domain [ 8744.246341] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 8744.246345] cfg80211: World regulatory domain updated: [ 8744.246348] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8744.246352] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8744.246356] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8744.246359] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8744.246363] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8744.246366] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8745.017205] wlan0: authenticate with 00:22:90:50:1a:50 (try 1) [ 8745.023453] wlan0: authenticated [ 8745.035026] wlan0: associate with 00:22:90:50:1a:50 (try 1) [ 8745.049383] wlan0: RX ReassocResp from 00:22:90:50:1a:50 (capab=0x431 status=0 aid=5) [ 8745.049388] wlan0: associated [ 8897.068722] cfg80211: All devices are disconnected, going to restore regulatory settings [ 8897.068734] cfg80211: Restoring regulatory settings [ 8897.068774] cfg80211: Calling CRDA to update world regulatory domain [ 8897.077630] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 8897.077640] cfg80211: World regulatory domain updated: [ 8897.077644] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8897.077652] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8897.077658] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8897.077664] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8897.077670] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8897.077676] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8897.874010] wlan0: authenticate with 00:22:90:50:1a:50 (try 1) [ 8897.887592] wlan0: authenticated [ 8897.887959] wlan0: associate with 00:22:90:50:1a:50 (try 1) [ 8897.903705] wlan0: RX ReassocResp from 00:22:90:50:1a:50 (capab=0x431 status=0 aid=5) [ 8897.903710] wlan0: associated [12323.506637] wlan0: deauthenticating from 00:22:90:50:1a:50 by local choice (reason=3) [12323.625388] cfg80211: All devices are disconnected, going to restore regulatory settings [12323.625405] cfg80211: Restoring regulatory settings [12323.625418] cfg80211: Calling CRDA to update world regulatory domain [12323.643426] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [12323.643430] cfg80211: World regulatory domain updated: [12323.643432] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [12323.643434] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [12323.643437] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [12323.643439] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [12323.643441] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [12323.643444] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [12323.691169] ADDRCONF(NETDEV_UP): wlan0: link is not ready [12324.226432] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S [12324.233287] iwlwifi 0000:09:00.0: Radio type=0x2-0x2-0x1 [12324.347796] ADDRCONF(NETDEV_UP): wlan0: link is not ready [12324.348131] ADDRCONF(NETDEV_UP): wlan0: link is not ready [12327.018650] wlan0: authenticate with 00:22:90:50:1a:50 (try 1) [12327.023484] wlan0: authenticated [12327.023691] wlan0: associate with 00:22:90:50:1a:50 (try 1) [12327.027184] wlan0: RX AssocResp from 00:22:90:50:1a:50 (capab=0x431 status=0 aid=5) [12327.027189] wlan0: associated [12327.032706] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [12335.358148] eth0: no IPv6 routers present [12337.585650] wlan0: no IPv6 routers present [14126.133845] cfg80211: All devices are disconnected, going to restore regulatory settings [14126.133850] cfg80211: Restoring regulatory settings [14126.133870] cfg80211: Calling CRDA to update world regulatory domain [14126.137414] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [14126.137418] cfg80211: World regulatory domain updated: [14126.137420] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [14126.137423] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [14126.137425] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [14126.137427] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [14126.137430] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [14126.137432] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [14126.909435] wlan0: authenticate with 00:22:90:50:1a:50 (try 1) [14126.916367] wlan0: authenticated [14126.927985] wlan0: associate with 00:22:90:50:1a:50 (try 1) [14126.956984] wlan0: RX ReassocResp from 00:22:90:50:1a:50 (capab=0x431 status=0 aid=5) [14126.956989] wlan0: associated [14365.728355] cfg80211: All devices are disconnected, going to restore regulatory settings [14365.728367] cfg80211: Restoring regulatory settings [14365.728409] cfg80211: Calling CRDA to update world regulatory domain [14365.737095] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [14365.737105] cfg80211: World regulatory domain updated: [14365.737109] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [14365.737116] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [14365.737122] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [14365.737128] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [14365.737134] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [14365.737140] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [14366.495942] wlan0: authenticate with 00:22:90:50:1a:50 (try 1) [14366.570849] wlan0: authenticated [14366.571110] wlan0: associate with 00:22:90:50:1a:50 (try 1) [14366.584178] wlan0: RX ReassocResp from 00:22:90:50:1a:50 (capab=0x431 status=0 aid=5) [14366.584183] wlan0: associated [21028.322032] wlan0: deauthenticating from 00:22:90:50:1a:50 by local choice (reason=3) [21028.404886] cfg80211: All devices are disconnected, going to restore regulatory settings [21028.404901] cfg80211: Restoring regulatory settings [21028.404913] cfg80211: Calling CRDA to update world regulatory domain [21028.416062] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [21028.416071] cfg80211: World regulatory domain updated: [21028.416076] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [21028.416083] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21028.416090] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [21028.416096] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [21028.416102] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21028.416108] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21032.150693] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S [21032.157564] iwlwifi 0000:09:00.0: Radio type=0x2-0x2-0x1 [21032.250952] ADDRCONF(NETDEV_UP): wlan0: link is not ready [21034.106278] gnome-control-c[29380]: segfault at 8 ip 00007fb3ec2f3235 sp 00007fffb9f4d870 error 4 in libnetwork.so[7fb3ec2e4000+15000] [21034.778995] wlan0: authenticate with 00:22:90:50:1a:50 (try 1) [21034.780109] wlan0: authenticated [21034.785283] wlan0: associate with 00:22:90:50:1a:50 (try 1) [21034.788177] wlan0: RX AssocResp from 00:22:90:50:1a:50 (capab=0x431 status=0 aid=5) [21034.788181] wlan0: associated [21034.796516] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [21034.798193] wlan0: deauthenticated from 00:22:90:50:1a:50 (Reason: 2) [21034.832830] cfg80211: All devices are disconnected, going to restore regulatory settings [21034.832836] cfg80211: Restoring regulatory settings [21034.832840] cfg80211: Calling CRDA to update world regulatory domain [21034.837555] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [21034.837560] cfg80211: World regulatory domain updated: [21034.837562] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [21034.837566] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21034.837570] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [21034.837574] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [21034.837577] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21034.837581] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21035.605759] wlan0: authenticate with 00:22:90:50:1a:50 (try 1) [21035.608114] wlan0: authenticated [21035.608347] wlan0: associate with 00:22:90:50:1a:50 (try 1) [21035.611294] wlan0: RX ReassocResp from 00:22:90:50:1a:50 (capab=0x431 status=0 aid=11) [21035.611298] wlan0: associated [21046.479409] wlan0: no IPv6 routers present [21067.690411] wlan0: deauthenticating from 00:22:90:50:1a:50 by local choice (reason=3) [21067.754741] cfg80211: All devices are disconnected, going to restore regulatory settings [21067.754756] cfg80211: Restoring regulatory settings [21067.754768] cfg80211: Calling CRDA to update world regulatory domain [21067.764602] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [21067.764612] cfg80211: World regulatory domain updated: [21067.764616] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [21067.764624] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21067.764630] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [21067.764636] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [21067.764642] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21067.764648] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21077.700398] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S [21077.707261] iwlwifi 0000:09:00.0: Radio type=0x2-0x2-0x1 [21077.823613] ADDRCONF(NETDEV_UP): wlan0: link is not ready [21079.584458] gnome-control-c[29486]: segfault at 8 ip 00007f3b19ce6235 sp 00007fff923c9580 error 4 in libnetwork.so[7f3b19cd7000+15000] [21080.294045] wlan0: authenticate with 00:22:90:50:1a:50 (try 1) [21080.296476] wlan0: authenticated [21080.306719] wlan0: associate with 00:22:90:50:1a:50 (try 1) [21080.313253] wlan0: RX AssocResp from 00:22:90:50:1a:50 (capab=0x431 status=0 aid=8) [21080.313258] wlan0: associated [21080.327501] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [21090.499899] wlan0: no IPv6 routers present [21097.390549] iwlwifi 0000:09:00.0: Microcode SW error detected. Restarting 0x2000000. [21097.390560] iwlwifi 0000:09:00.0: Loaded firmware version: 18.168.6.1 [21097.390650] iwlwifi 0000:09:00.0: Start IWL Error Log Dump: [21097.390656] iwlwifi 0000:09:00.0: Status: 0x000412E5, count: 6 [21097.390663] iwlwifi 0000:09:00.0: 0x00002076 | ADVANCED_SYSASSERT [21097.390669] iwlwifi 0000:09:00.0: 0x00009C14 | uPc [21097.390673] iwlwifi 0000:09:00.0: 0x00009BCE | branchlink1 [21097.390678] iwlwifi 0000:09:00.0: 0x00009BCE | branchlink2 [21097.390683] iwlwifi 0000:09:00.0: 0x0000DBEA | interruptlink1 [21097.390688] iwlwifi 0000:09:00.0: 0x00000000 | interruptlink2 [21097.390692] iwlwifi 0000:09:00.0: 0x00000000 | data1 [21097.390697] iwlwifi 0000:09:00.0: 0x00000200 | data2 [21097.390702] iwlwifi 0000:09:00.0: 0x00000609 | line [21097.390706] iwlwifi 0000:09:00.0: 0x00018E0C | beacon time [21097.390711] iwlwifi 0000:09:00.0: 0x000001F3 | tsf low [21097.390716] iwlwifi 0000:09:00.0: 0x00000000 | tsf hi [21097.390720] iwlwifi 0000:09:00.0: 0x00000000 | time gp1 [21097.390725] iwlwifi 0000:09:00.0: 0x0129E4B0 | time gp2 [21097.390730] iwlwifi 0000:09:00.0: 0x00000000 | time gp3 [21097.390735] iwlwifi 0000:09:00.0: 0x754312A8 | uCode version [21097.390740] iwlwifi 0000:09:00.0: 0x000000B0 | hw version [21097.390744] iwlwifi 0000:09:00.0: 0x00880303 | board version [21097.390749] iwlwifi 0000:09:00.0: 0x0991004E | hcmd [21097.390754] iwlwifi 0000:09:00.0: CSR values: [21097.390758] iwlwifi 0000:09:00.0: (2nd byte of CSR_INT_COALESCING is CSR_INT_PERIODIC_REG) [21097.390768] iwlwifi 0000:09:00.0: CSR_HW_IF_CONFIG_REG: 0X00880303 [21097.390776] iwlwifi 0000:09:00.0: CSR_INT_COALESCING: 0X0000ff40 [21097.390785] iwlwifi 0000:09:00.0: CSR_INT: 0X00000000 [21097.390793] iwlwifi 0000:09:00.0: CSR_INT_MASK: 0X00000000 [21097.390801] iwlwifi 0000:09:00.0: CSR_FH_INT_STATUS: 0X00000000 [21097.390810] iwlwifi 0000:09:00.0: CSR_GPIO_IN: 0X00000038 [21097.390818] iwlwifi 0000:09:00.0: CSR_RESET: 0X00000000 [21097.390827] iwlwifi 0000:09:00.0: CSR_GP_CNTRL: 0X080403c5 [21097.390835] iwlwifi 0000:09:00.0: CSR_HW_REV: 0X000000b0 [21097.390844] iwlwifi 0000:09:00.0: CSR_EEPROM_REG: 0Xec0d0ffd [21097.390852] iwlwifi 0000:09:00.0: CSR_EEPROM_GP: 0X90000801 [21097.390860] iwlwifi 0000:09:00.0: CSR_OTP_GP_REG: 0X00030001 [21097.390868] iwlwifi 0000:09:00.0: CSR_GIO_REG: 0X00080044 [21097.390877] iwlwifi 0000:09:00.0: CSR_GP_UCODE_REG: 0X000023f5 [21097.390885] iwlwifi 0000:09:00.0: CSR_GP_DRIVER_REG: 0X00000000 [21097.390895] iwlwifi 0000:09:00.0: CSR_UCODE_DRV_GP1: 0X00000000 [21097.390903] iwlwifi 0000:09:00.0: CSR_UCODE_DRV_GP2: 0X00000000 [21097.390911] iwlwifi 0000:09:00.0: CSR_LED_REG: 0X00000078 [21097.390920] iwlwifi 0000:09:00.0: CSR_DRAM_INT_TBL_REG: 0X881173c3 [21097.390928] iwlwifi 0000:09:00.0: CSR_GIO_CHICKEN_BITS: 0X27800200 [21097.390937] iwlwifi 0000:09:00.0: CSR_ANA_PLL_CFG: 0X00000000 [21097.390945] iwlwifi 0000:09:00.0: CSR_HW_REV_WA_REG: 0X0001001a [21097.390954] iwlwifi 0000:09:00.0: CSR_DBG_HPET_MEM_REG: 0Xffff0010 [21097.390959] iwlwifi 0000:09:00.0: FH register values: [21097.390977] iwlwifi 0000:09:00.0: FH_RSCSR_CHNL0_STTS_WPTR_REG: 0X1133ad00 [21097.390995] iwlwifi 0000:09:00.0: FH_RSCSR_CHNL0_RBDCB_BASE_REG: 0X01144870 [21097.391013] iwlwifi 0000:09:00.0: FH_RSCSR_CHNL0_WPTR: 0X000000a8 [21097.391031] iwlwifi 0000:09:00.0: FH_MEM_RCSR_CHNL0_CONFIG_REG: 0X80819104 [21097.391049] iwlwifi 0000:09:00.0: FH_MEM_RSSR_SHARED_CTRL_REG: 0X000000fc [21097.391067] iwlwifi 0000:09:00.0: FH_MEM_RSSR_RX_STATUS_REG: 0X07030000 [21097.391085] iwlwifi 0000:09:00.0: FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV: 0X00000000 [21097.391103] iwlwifi 0000:09:00.0: FH_TSSR_TX_STATUS_REG: 0X07ff0001 [21097.391121] iwlwifi 0000:09:00.0: FH_TSSR_TX_ERROR_REG: 0X00000000 [21097.391181] iwlwifi 0000:09:00.0: Start IWL Event Log Dump: nothing in log [21097.391193] iwlwifi 0000:09:00.0: Command REPLY_ADD_STA failed: FW Error [21097.391203] iwlwifi 0000:09:00.0: Adding station 00:22:90:50:1a:50 failed. [21097.391212] iwlwifi 0000:09:00.0: fw recovery, no hcmd send [21097.391220] iwlwifi 0000:09:00.0: Error sending REPLY_ADD_STA: enqueue_hcmd failed: -5 [21097.391229] iwlwifi 0000:09:00.0: Adding station ff:ff:ff:ff:ff:ff failed. [21097.391240] iwlwifi 0000:09:00.0: fw recovery, no hcmd send [21097.391247] iwlwifi 0000:09:00.0: Error sending REPLY_RXON_TIMING: enqueue_hcmd failed: -5 [21097.391254] iwlwifi 0000:09:00.0: Failed to send timing (-5)! [21097.391559] wlan0: deauthenticating from 00:22:90:50:1a:50 by local choice (reason=3) [21097.391568] ieee80211 phy0: Hardware restart was requested [21097.457123] ieee80211 phy0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-2) [21097.553245] cfg80211: All devices are disconnected, going to restore regulatory settings [21097.553260] cfg80211: Restoring regulatory settings [21097.554358] cfg80211: Calling CRDA to update world regulatory domain [21097.556600] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S [21097.563488] iwlwifi 0000:09:00.0: Radio type=0x2-0x2-0x1 [21097.566064] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [21097.566074] cfg80211: World regulatory domain updated: [21097.566078] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [21097.566086] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21097.566092] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [21097.566099] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [21097.566104] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21097.566110] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21098.009077] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S [21098.015943] iwlwifi 0000:09:00.0: Radio type=0x2-0x2-0x1 [21098.124791] ADDRCONF(NETDEV_UP): wlan0: link is not ready [21127.423083] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S [21127.429928] iwlwifi 0000:09:00.0: Radio type=0x2-0x2-0x1 [21127.533035] ADDRCONF(NETDEV_UP): wlan0: link is not ready [21130.037271] wlan0: authenticate with 00:22:90:50:1a:50 (try 1) [21130.039973] wlan0: authenticated [21130.045290] wlan0: associate with 00:22:90:50:1a:50 (try 1) [21130.047302] wlan0: RX AssocResp from 00:22:90:50:1a:50 (capab=0x431 status=0 aid=8) [21130.047306] wlan0: associated [21130.052512] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [21140.233571] wlan0: no IPv6 routers present [21429.689289] cfg80211: All devices are disconnected, going to restore regulatory settings [21429.689311] cfg80211: Restoring regulatory settings [21429.689328] cfg80211: Calling CRDA to update world regulatory domain [21429.698639] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [21429.698649] cfg80211: World regulatory domain updated: [21429.698654] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [21429.698661] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21429.698667] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [21429.698674] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [21429.698680] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21429.698685] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21430.389319] wlan0: authenticate with 00:22:90:50:1a:50 (try 1) [21430.549512] wlan0: authenticated [21430.561235] wlan0: associate with 00:22:90:50:1a:50 (try 1) [21430.585563] wlan0: RX ReassocResp from 00:22:90:50:1a:50 (capab=0x431 status=0 aid=8) [21430.585573] wlan0: associated [21431.104402] wlan0: deauthenticated from 00:22:90:50:1a:50 (Reason: 23) [21431.150346] cfg80211: All devices are disconnected, going to restore regulatory settings [21431.150361] cfg80211: Restoring regulatory settings [21431.150372] cfg80211: Calling CRDA to update world regulatory domain [21431.159208] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [21431.159219] cfg80211: World regulatory domain updated: [21431.159223] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [21431.159230] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21431.159236] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [21431.159243] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [21431.159248] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21431.159254] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21431.893383] wlan0: authenticate with 00:22:90:50:1a:50 (try 1) [21431.947780] wlan0: authenticated [21431.961741] wlan0: associate with 00:22:90:50:1a:50 (try 1) [21432.003731] wlan0: RX ReassocResp from 00:22:90:50:1a:50 (capab=0x431 status=0 aid=8) [21432.003741] wlan0: associated [21988.562801] wlan0: deauthenticating from 00:22:90:50:1a:50 by local choice (reason=3) [21988.717317] cfg80211: All devices are disconnected, going to restore regulatory settings [21988.717323] cfg80211: Restoring regulatory settings [21988.717329] cfg80211: Calling CRDA to update world regulatory domain [21988.723895] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [21988.723899] cfg80211: World regulatory domain updated: [21988.723901] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [21988.723905] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21988.723908] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [21988.723911] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [21988.723913] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21988.723916] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21988.766952] ADDRCONF(NETDEV_UP): wlan0: link is not ready [22085.506059] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S [22085.512885] iwlwifi 0000:09:00.0: Radio type=0x2-0x2-0x1 [22085.668971] ADDRCONF(NETDEV_UP): wlan0: link is not ready [22085.822901] wlan0: Trigger new scan to find an IBSS to join [22085.823646] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [22088.500586] wlan0: Trigger new scan to find an IBSS to join [22091.311441] wlan0: Trigger new scan to find an IBSS to join [22092.846426] wlan0: Creating new IBSS network, BSSID a6:75:54:65:4a:fa [22092.856379] iwlwifi 0000:09:00.0: Unable to find TIM Element in beacon [22092.856890] iwlwifi 0000:09:00.0: Unable to find TIM Element in beacon [22095.856809] wlan0: no IPv6 routers present [22122.112772] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [22172.647721] iwlwifi 0000:09:00.0: REPLY_REMOVE_STA failed [22172.647734] iwlwifi 0000:09:00.0: failed to remove IBSS station 00:00:00:00:00:00 [22196.163940] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S [22196.170797] iwlwifi 0000:09:00.0: Radio type=0x2-0x2-0x1 [22196.273320] ADDRCONF(NETDEV_UP): wlan0: link is not ready [22196.400954] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [22196.401128] wlan0: Trigger new scan to find an IBSS to join [22199.090672] wlan0: Trigger new scan to find an IBSS to join [22201.749455] wlan0: Trigger new scan to find an IBSS to join [22203.440870] wlan0: Creating new IBSS network, BSSID 52:c8:0d:3f:f1:0f [22203.512323] iwlwifi 0000:09:00.0: Unable to find TIM Element in beacon [22203.513989] iwlwifi 0000:09:00.0: Unable to find TIM Element in beacon [22207.290799] wlan0: no IPv6 routers present [22299.352091] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [22330.740258] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [22753.311271] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [22784.500554] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [22816.472587] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [22847.667117] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)