Oct 1 10:51:12 Hilbert kernel: [ 872.550138] usb 2-2: new high speed USB device number 4 using ehci_hcd Oct 1 11:05:31 Hilbert kernel: [ 1731.762898] iwl3945 0000:0c:00.0: Microcode SW error detected. Restarting 0x82000008. Oct 1 11:05:31 Hilbert kernel: [ 1731.762911] iwl3945 0000:0c:00.0: Loaded firmware version: 15.32.2.9 Oct 1 11:05:31 Hilbert kernel: [ 1731.762948] iwl3945 0000:0c:00.0: Start IWL Error Log Dump: Oct 1 11:05:31 Hilbert kernel: [ 1731.762955] iwl3945 0000:0c:00.0: Status: 0x000202E4, count: 1 Oct 1 11:05:31 Hilbert kernel: [ 1731.762961] iwl3945 0000:0c:00.0: Desc Time asrtPC blink2 ilink1 nmiPC Line Oct 1 11:05:31 Hilbert kernel: [ 1731.763196] iwl3945 0000:0c:00.0: SYSASSERT (0x5) 0000202581 0x008B6 0x00274 0x00320 0x04EBC 116 Oct 1 11:05:31 Hilbert kernel: [ 1731.763200] Oct 1 11:05:31 Hilbert kernel: [ 1731.763333] iwl3945 0000:0c:00.0: Start IWL Event Log Dump: display last 20 count Oct 1 11:05:31 Hilbert kernel: [ 1731.763379] iwl3945 0000:0c:00.0: 0000002177 0x00000028 0463 Oct 1 11:05:31 Hilbert kernel: [ 1731.763406] iwl3945 0000:0c:00.0: 0000002178 0x00000028 0462 Oct 1 11:05:31 Hilbert kernel: [ 1731.763433] iwl3945 0000:0c:00.0: 0000002197 0x000000d1 0103 Oct 1 11:05:31 Hilbert kernel: [ 1731.763459] iwl3945 0000:0c:00.0: 0000002310 0x023a001c 0206 Oct 1 11:05:31 Hilbert kernel: [ 1731.763485] iwl3945 0000:0c:00.0: 0000002312 0x00000001 0204 Oct 1 11:05:31 Hilbert kernel: [ 1731.763511] iwl3945 0000:0c:00.0: 0000002315 0x00000001 0219 Oct 1 11:05:31 Hilbert kernel: [ 1731.763537] iwl3945 0000:0c:00.0: 0000002316 0x00000042 0211 Oct 1 11:05:31 Hilbert kernel: [ 1731.763563] iwl3945 0000:0c:00.0: 0000002347 0x00000000 0212 Oct 1 11:05:31 Hilbert kernel: [ 1731.763589] iwl3945 0000:0c:00.0: 0000002375 0x00000000 0215 Oct 1 11:05:31 Hilbert kernel: [ 1731.763615] iwl3945 0000:0c:00.0: 0000002387 0x00000008 0220 Oct 1 11:05:31 Hilbert kernel: [ 1731.763642] iwl3945 0000:0c:00.0: 0000002424 0x04850097 0401 Oct 1 11:05:31 Hilbert kernel: [ 1731.763668] iwl3945 0000:0c:00.0: 0000002427 0x00000028 0451 Oct 1 11:05:31 Hilbert kernel: [ 1731.763694] iwl3945 0000:0c:00.0: 0000002448 0x00000000 0451 Oct 1 11:05:31 Hilbert kernel: [ 1731.763720] iwl3945 0000:0c:00.0: 0000002549 0x04860047 0401 Oct 1 11:05:31 Hilbert kernel: [ 1731.763746] iwl3945 0000:0c:00.0: 0000002599 0x023a001c 0206 Oct 1 11:05:31 Hilbert kernel: [ 1731.763772] iwl3945 0000:0c:00.0: 0000002601 0x00000001 0204 Oct 1 11:05:31 Hilbert kernel: [ 1731.763797] iwl3945 0000:0c:00.0: 0000002604 0x00000001 0219 Oct 1 11:05:31 Hilbert kernel: [ 1731.763824] iwl3945 0000:0c:00.0: 0000002605 0x00000042 0211 Oct 1 11:05:31 Hilbert kernel: [ 1731.763850] iwl3945 0000:0c:00.0: 0000202579 0x00000002 0123 Oct 1 11:05:31 Hilbert kernel: [ 1731.763877] iwl3945 0000:0c:00.0: 0000202582 0x00000100 0125 Oct 1 11:05:31 Hilbert kernel: [ 1731.763904] iwl3945 0000:0c:00.0: Error Reply type 0x00000005 cmd REPLY_TX (0x1C) seq 0x023A ser 0x00740000 Oct 1 11:05:31 Hilbert kernel: [ 1731.763929] iwl3945 0000:0c:00.0: Command REPLY_RATE_SCALE failed: FW Error Oct 1 11:05:31 Hilbert kernel: [ 1731.763937] iwl3945 0000:0c:00.0: Error setting HW rate table: FFFFFFFB Oct 1 11:05:31 Hilbert kernel: [ 1731.772540] iwl3945 0000:0c:00.0: Can't stop Rx DMA. Oct 1 11:05:31 Hilbert kernel: [ 1731.772643] ieee80211 phy0: Hardware restart was requested Oct 1 11:15:30 Hilbert kernel: [ 2330.962497] iwl3945 0000:0c:00.0: Microcode SW error detected. Restarting 0x82000008. Oct 1 11:15:30 Hilbert kernel: [ 2330.962505] iwl3945 0000:0c:00.0: Loaded firmware version: 15.32.2.9 Oct 1 11:15:30 Hilbert kernel: [ 2330.962540] iwl3945 0000:0c:00.0: Start IWL Error Log Dump: Oct 1 11:15:30 Hilbert kernel: [ 2330.962545] iwl3945 0000:0c:00.0: Status: 0x000202E4, count: 1 Oct 1 11:15:30 Hilbert kernel: [ 2330.962549] iwl3945 0000:0c:00.0: Desc Time asrtPC blink2 ilink1 nmiPC Line Oct 1 11:15:30 Hilbert kernel: [ 2330.962776] iwl3945 0000:0c:00.0: SYSASSERT (0x5) 0000201885 0x008B6 0x00274 0x00320 0x04EBC 116 Oct 1 11:15:30 Hilbert kernel: [ 2330.962779] Oct 1 11:15:30 Hilbert kernel: [ 2330.962908] iwl3945 0000:0c:00.0: Start IWL Event Log Dump: display last 20 count Oct 1 11:15:30 Hilbert kernel: [ 2330.962951] iwl3945 0000:0c:00.0: 0000001504 0x000000d1 0103 Oct 1 11:15:30 Hilbert kernel: [ 2330.962975] iwl3945 0000:0c:00.0: 0000001519 0x02f5001c 0206 Oct 1 11:15:30 Hilbert kernel: [ 2330.962999] iwl3945 0000:0c:00.0: 0000001521 0x00000001 0204 Oct 1 11:15:30 Hilbert kernel: [ 2330.963022] iwl3945 0000:0c:00.0: 0000001524 0x00000001 0219 Oct 1 11:15:30 Hilbert kernel: [ 2330.963046] iwl3945 0000:0c:00.0: 0000001525 0x00000042 0211 Oct 1 11:15:30 Hilbert kernel: [ 2330.963070] iwl3945 0000:0c:00.0: 0000001548 0x00000000 0212 Oct 1 11:15:30 Hilbert kernel: [ 2330.963094] iwl3945 0000:0c:00.0: 0000001580 0x00000000 0215 Oct 1 11:15:30 Hilbert kernel: [ 2330.963117] iwl3945 0000:0c:00.0: 0000001592 0x00000008 0220 Oct 1 11:15:30 Hilbert kernel: [ 2330.963141] iwl3945 0000:0c:00.0: 0000001639 0x04500097 0401 Oct 1 11:15:30 Hilbert kernel: [ 2330.963165] iwl3945 0000:0c:00.0: 0000001642 0x00000024 0451 Oct 1 11:15:30 Hilbert kernel: [ 2330.963189] iwl3945 0000:0c:00.0: 0000001655 0x00167376 0450 Oct 1 11:15:30 Hilbert kernel: [ 2330.963212] iwl3945 0000:0c:00.0: 0000001664 0x00000040 0451 Oct 1 11:15:30 Hilbert kernel: [ 2330.963236] iwl3945 0000:0c:00.0: 0000001776 0x04510047 0401 Oct 1 11:15:30 Hilbert kernel: [ 2330.963260] iwl3945 0000:0c:00.0: 0000001850 0x04520047 0401 Oct 1 11:15:30 Hilbert kernel: [ 2330.963283] iwl3945 0000:0c:00.0: 0000001903 0x02f5001c 0206 Oct 1 11:15:30 Hilbert kernel: [ 2330.963307] iwl3945 0000:0c:00.0: 0000001905 0x00000001 0204 Oct 1 11:15:30 Hilbert kernel: [ 2330.963331] iwl3945 0000:0c:00.0: 0000001908 0x00000001 0219 Oct 1 11:15:30 Hilbert kernel: [ 2330.963354] iwl3945 0000:0c:00.0: 0000001909 0x00000042 0211 Oct 1 11:15:30 Hilbert kernel: [ 2330.963378] iwl3945 0000:0c:00.0: 0000201883 0x00000002 0123 Oct 1 11:15:30 Hilbert kernel: [ 2330.963402] iwl3945 0000:0c:00.0: 0000201886 0x00000100 0125 Oct 1 11:15:30 Hilbert kernel: [ 2330.963427] iwl3945 0000:0c:00.0: Error Reply type 0x00000005 cmd REPLY_TX (0x1C) seq 0x02F5 ser 0x00740000 Oct 1 11:15:30 Hilbert kernel: [ 2330.963447] iwl3945 0000:0c:00.0: Command REPLY_RXON failed: FW Error Oct 1 11:15:30 Hilbert kernel: [ 2330.963452] iwl3945 0000:0c:00.0: Error clearing ASSOC_MSK on current configuration (-5). Oct 1 11:15:30 Hilbert kernel: [ 2330.971826] iwl3945 0000:0c:00.0: Can't stop Rx DMA. Oct 1 11:15:30 Hilbert kernel: [ 2330.971918] ieee80211 phy0: Hardware restart was requested Oct 1 12:28:26 Hilbert kernel: [ 6706.540045] ieee80211 phy0: wlan0: No probe response from AP 00:23:8e:4b:11:70 after 500ms, disconnecting. Oct 1 12:28:26 Hilbert kernel: [ 6706.650203] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 1 12:28:26 Hilbert kernel: [ 6706.650213] cfg80211: Restoring regulatory settings Oct 1 12:28:26 Hilbert kernel: [ 6706.650220] cfg80211: Calling CRDA to update world regulatory domain Oct 1 12:28:26 Hilbert wpa_supplicant[1082]: CTRL-EVENT-DISCONNECTED bssid=00:23:8e:4b:11:70 reason=4 Oct 1 12:28:27 Hilbert kernel: [ 6707.845950] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain Oct 1 12:28:27 Hilbert kernel: [ 6707.845955] cfg80211: World regulatory domain updated: Oct 1 12:28:27 Hilbert kernel: [ 6707.845958] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Oct 1 12:28:27 Hilbert kernel: [ 6707.845962] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 1 12:28:27 Hilbert kernel: [ 6707.845967] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 1 12:28:27 Hilbert kernel: [ 6707.845970] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 1 12:28:27 Hilbert kernel: [ 6707.845974] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 1 12:28:27 Hilbert kernel: [ 6707.845977] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 1 12:28:27 Hilbert NetworkManager[1032]: (wlan0): supplicant interface state: completed -> scanning Oct 1 12:28:30 Hilbert kernel: [ 6710.869598] init: tty4 main process (1061) killed by TERM signal Oct 1 12:28:30 Hilbert kernel: [ 6710.869849] init: tty5 main process (1067) killed by TERM signal Oct 1 12:28:30 Hilbert kernel: [ 6710.870123] init: tty2 main process (1092) killed by TERM signal Oct 1 12:28:30 Hilbert kernel: [ 6710.870344] init: tty3 main process (1093) killed by TERM signal Oct 1 12:28:30 Hilbert kernel: [ 6710.870575] init: tty6 main process (1095) killed by TERM signal Oct 1 12:28:30 Hilbert kernel: [ 6710.871005] init: cron main process (1102) killed by TERM signal Oct 1 12:28:30 Hilbert kernel: [ 6710.871411] init: irqbalance main process (1118) killed by TERM signal Oct 1 12:28:30 Hilbert kernel: [ 6710.871632] init: tty1 main process (1318) killed by TERM signal Oct 1 12:28:30 Hilbert kernel: Kernel logging (proc) stopped. Oct 1 13:32:05 Hilbert kernel: imklog 5.8.1, log source = /proc/kmsg started. Oct 1 13:32:05 Hilbert kernel: [ 0.000000] Initializing cgroup subsys cpuset Oct 1 13:32:05 Hilbert kernel: [ 0.000000] Initializing cgroup subsys cpu Oct 1 13:32:05 Hilbert kernel: [ 0.000000] Linux version 3.0.0-11-generic (buildd@crested) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu2) ) #18-Ubuntu SMP Tue Sep 13 23:38:01 UTC 2011 (Ubuntu 3.0.0-11.18-generic 3.0.4) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-11-generic root=UUID=c49615ed-88be-4cff-812e-d4389247f03d ro quiet splash vt.handoff=7 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] KERNEL supported cpus: Oct 1 13:32:05 Hilbert kernel: [ 0.000000] Intel GenuineIntel Oct 1 13:32:05 Hilbert kernel: [ 0.000000] AMD AuthenticAMD Oct 1 13:32:05 Hilbert kernel: [ 0.000000] Centaur CentaurHauls Oct 1 13:32:05 Hilbert kernel: [ 0.000000] BIOS-provided physical RAM map: Oct 1 13:32:05 Hilbert kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe6d800 (usable) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] BIOS-e820: 000000007fe6d800 - 0000000080000000 (reserved) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] NX (Execute Disable) protection: active Oct 1 13:32:05 Hilbert kernel: [ 0.000000] DMI 2.4 present. Oct 1 13:32:05 Hilbert kernel: [ 0.000000] DMI: Dell Inc. Inspiron 1520 /0KY768, BIOS A04 11/05/2007 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] No AGP bridge found Oct 1 13:32:05 Hilbert kernel: [ 0.000000] last_pfn = 0x7fe6d max_arch_pfn = 0x400000000 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] MTRR default type: uncachable Oct 1 13:32:05 Hilbert kernel: [ 0.000000] MTRR fixed ranges enabled: Oct 1 13:32:05 Hilbert kernel: [ 0.000000] 00000-9FFFF write-back Oct 1 13:32:05 Hilbert kernel: [ 0.000000] A0000-BFFFF uncachable Oct 1 13:32:05 Hilbert kernel: [ 0.000000] C0000-CFFFF write-protect Oct 1 13:32:05 Hilbert kernel: [ 0.000000] D0000-EFFFF uncachable Oct 1 13:32:05 Hilbert kernel: [ 0.000000] F0000-FFFFF write-protect Oct 1 13:32:05 Hilbert kernel: [ 0.000000] MTRR variable ranges enabled: Oct 1 13:32:05 Hilbert kernel: [ 0.000000] 0 base 000000000 mask F80000000 write-back Oct 1 13:32:05 Hilbert kernel: [ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable Oct 1 13:32:05 Hilbert kernel: [ 0.000000] 2 disabled Oct 1 13:32:05 Hilbert kernel: [ 0.000000] 3 disabled Oct 1 13:32:05 Hilbert kernel: [ 0.000000] 4 disabled Oct 1 13:32:05 Hilbert kernel: [ 0.000000] 5 disabled Oct 1 13:32:05 Hilbert kernel: [ 0.000000] 6 disabled Oct 1 13:32:05 Hilbert kernel: [ 0.000000] 7 disabled Oct 1 13:32:05 Hilbert kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] original variable MTRRs Oct 1 13:32:05 Hilbert kernel: [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB Oct 1 13:32:05 Hilbert kernel: [ 0.000000] reg 1, base: 2047MB, range: 1MB, type UC Oct 1 13:32:05 Hilbert kernel: [ 0.000000] total RAM covered: 2047M Oct 1 13:32:05 Hilbert kernel: [ 0.000000] Found optimal setting for mtrr clean up Oct 1 13:32:05 Hilbert kernel: [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 2 lose cover RAM: 0G Oct 1 13:32:05 Hilbert kernel: [ 0.000000] New variable MTRRs Oct 1 13:32:05 Hilbert kernel: [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB Oct 1 13:32:05 Hilbert kernel: [ 0.000000] reg 1, base: 2047MB, range: 1MB, type UC Oct 1 13:32:05 Hilbert kernel: [ 0.000000] initial memory mapped : 0 - 20000000 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] init_memory_mapping: 0000000000000000-000000007fe6d000 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] 0000000000 - 007fe00000 page 2M Oct 1 13:32:05 Hilbert kernel: [ 0.000000] 007fe00000 - 007fe6d000 page 4k Oct 1 13:32:05 Hilbert kernel: [ 0.000000] kernel direct mapping tables up to 7fe6d000 @ 7fe69000-7fe6d000 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] RAMDISK: 365bc000 - 372d6000 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] ACPI: RSDP 00000000000fbbf0 00024 (v02 DELL ) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] ACPI: XSDT 000000007fe6f200 0005C (v01 DELL M08 27D70B05 ASL 00000061) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] ACPI: FACP 000000007fe6f09c 000F4 (v04 DELL M08 27D70B05 ASL 00000061) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] ACPI: DSDT 000000007fe6f800 0565E (v02 INT430 SYSFexxx 00001001 INTL 20050624) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] ACPI: FACS 000000007fe7e000 00040 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] ACPI: HPET 000000007fe6f300 00038 (v01 DELL M08 00000001 ASL 00000061) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] ACPI: APIC 000000007fe6f400 00068 (v01 DELL M08 27D70B05 ASL 00000047) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] ACPI: MCFG 000000007fe6f3c0 0003E (v16 DELL M08 27D70B05 ASL 00000061) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] ACPI: SLIC 000000007fe6f49c 00176 (v01 DELL M08 27D70B05 ASL 00000061) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] ACPI: BOOT 000000007fe6efc0 00028 (v01 DELL M08 27D70B05 ASL 00000061) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] ACPI: SSDT 000000007fe6d9bc 004CC (v01 PmRef CpuPm 00003000 INTL 20050624) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] No NUMA configuration found Oct 1 13:32:05 Hilbert kernel: [ 0.000000] Faking a node at 0000000000000000-000000007fe6d000 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] Initmem setup node 0 0000000000000000-000000007fe6d000 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] NODE_DATA [000000007fe64000 - 000000007fe68fff] Oct 1 13:32:05 Hilbert kernel: [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] Zone PFN ranges: Oct 1 13:32:05 Hilbert kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] Normal empty Oct 1 13:32:05 Hilbert kernel: [ 0.000000] Movable zone start PFN for each node Oct 1 13:32:05 Hilbert kernel: [ 0.000000] early_node_map[2] active PFN ranges Oct 1 13:32:05 Hilbert kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f Oct 1 13:32:05 Hilbert kernel: [ 0.000000] 0: 0x00000100 -> 0x0007fe6d Oct 1 13:32:05 Hilbert kernel: [ 0.000000] On node 0 totalpages: 523772 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] DMA zone: 56 pages used for memmap Oct 1 13:32:05 Hilbert kernel: [ 0.000000] DMA zone: 5 pages reserved Oct 1 13:32:05 Hilbert kernel: [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] DMA32 zone: 7107 pages used for memmap Oct 1 13:32:05 Hilbert kernel: [ 0.000000] DMA32 zone: 512682 pages, LIFO batch:31 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] ACPI: IRQ0 used by override. Oct 1 13:32:05 Hilbert kernel: [ 0.000000] ACPI: IRQ2 used by override. Oct 1 13:32:05 Hilbert kernel: [ 0.000000] ACPI: IRQ9 used by override. Oct 1 13:32:05 Hilbert kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Oct 1 13:32:05 Hilbert kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs Oct 1 13:32:05 Hilbert kernel: [ 0.000000] nr_irqs_gsi: 40 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:74000000) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware Oct 1 13:32:05 Hilbert kernel: [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007fc00000 s79616 r8192 d22784 u1048576 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] pcpu-alloc: s79616 r8192 d22784 u1048576 alloc=1*2097152 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] pcpu-alloc: [0] 0 1 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516604 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] Policy zone: DMA32 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-11-generic root=UUID=c49615ed-88be-4cff-812e-d4389247f03d ro quiet splash vt.handoff=7 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] Checking aperture... Oct 1 13:32:05 Hilbert kernel: [ 0.000000] No AGP bridge found Oct 1 13:32:05 Hilbert kernel: [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area Oct 1 13:32:05 Hilbert kernel: [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! Oct 1 13:32:05 Hilbert kernel: [ 0.000000] Memory: 2039268k/2095540k available (6104k kernel code, 452k absent, 55820k reserved, 4880k data, 984k init) Oct 1 13:32:05 Hilbert kernel: [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] Hierarchical RCU implementation. Oct 1 13:32:05 Hilbert kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. Oct 1 13:32:05 Hilbert kernel: [ 0.000000] NR_IRQS:16640 nr_irqs:512 16 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] Extended CMOS year: 2000 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] vt handoff: transparent VT on vt#7 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] Console: colour VGA+ 80x25 Oct 1 13:32:05 Hilbert kernel: [ 0.000000] console [tty0] enabled Oct 1 13:32:05 Hilbert kernel: [ 0.000000] allocated 16777216 bytes of page_cgroup Oct 1 13:32:05 Hilbert kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups Oct 1 13:32:05 Hilbert kernel: [ 0.000000] hpet clockevent registered Oct 1 13:32:05 Hilbert kernel: [ 0.000000] Fast TSC calibration using PIT Oct 1 13:32:05 Hilbert kernel: [ 0.000000] Detected 2193.801 MHz processor. Oct 1 13:32:05 Hilbert kernel: [ 0.010005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4387.60 BogoMIPS (lpj=21938010) Oct 1 13:32:05 Hilbert kernel: [ 0.010010] pid_max: default: 32768 minimum: 301 Oct 1 13:32:05 Hilbert kernel: [ 0.010042] Security Framework initialized Oct 1 13:32:05 Hilbert kernel: [ 0.010062] AppArmor: AppArmor initialized Oct 1 13:32:05 Hilbert kernel: [ 0.010064] Yama: becoming mindful. Oct 1 13:32:05 Hilbert kernel: [ 0.010308] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Oct 1 13:32:05 Hilbert kernel: [ 0.011487] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Oct 1 13:32:05 Hilbert kernel: [ 0.012046] Mount-cache hash table entries: 256 Oct 1 13:32:05 Hilbert kernel: [ 0.012202] Initializing cgroup subsys cpuacct Oct 1 13:32:05 Hilbert kernel: [ 0.012207] Initializing cgroup subsys memory Oct 1 13:32:05 Hilbert kernel: [ 0.012217] Initializing cgroup subsys devices Oct 1 13:32:05 Hilbert kernel: [ 0.012220] Initializing cgroup subsys freezer Oct 1 13:32:05 Hilbert kernel: [ 0.012222] Initializing cgroup subsys net_cls Oct 1 13:32:05 Hilbert kernel: [ 0.012224] Initializing cgroup subsys blkio Oct 1 13:32:05 Hilbert kernel: [ 0.012232] Initializing cgroup subsys perf_event Oct 1 13:32:05 Hilbert kernel: [ 0.012266] CPU: Physical Processor ID: 0 Oct 1 13:32:05 Hilbert kernel: [ 0.012268] CPU: Processor Core ID: 0 Oct 1 13:32:05 Hilbert kernel: [ 0.012271] mce: CPU supports 6 MCE banks Oct 1 13:32:05 Hilbert kernel: [ 0.012281] CPU0: Thermal monitoring enabled (TM2) Oct 1 13:32:05 Hilbert kernel: [ 0.012286] using mwait in idle threads. Oct 1 13:32:05 Hilbert kernel: [ 0.014827] ACPI: Core revision 20110413 Oct 1 13:32:05 Hilbert kernel: [ 0.023549] ftrace: allocating 25651 entries in 101 pages Oct 1 13:32:05 Hilbert kernel: [ 0.030432] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Oct 1 13:32:05 Hilbert kernel: [ 0.134496] CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b Oct 1 13:32:05 Hilbert kernel: [ 0.140000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. Oct 1 13:32:05 Hilbert kernel: [ 0.140000] PEBS disabled due to CPU errata. Oct 1 13:32:05 Hilbert kernel: [ 0.140000] ... version: 2 Oct 1 13:32:05 Hilbert kernel: [ 0.140000] ... bit width: 40 Oct 1 13:32:05 Hilbert kernel: [ 0.140000] ... generic registers: 2 Oct 1 13:32:05 Hilbert kernel: [ 0.140000] ... value mask: 000000ffffffffff Oct 1 13:32:05 Hilbert kernel: [ 0.140000] ... max period: 000000007fffffff Oct 1 13:32:05 Hilbert kernel: [ 0.140000] ... fixed-purpose events: 3 Oct 1 13:32:05 Hilbert kernel: [ 0.140000] ... event mask: 0000000700000003 Oct 1 13:32:05 Hilbert kernel: [ 0.140000] Booting Node 0, Processors #1 Ok. Oct 1 13:32:05 Hilbert kernel: [ 0.140000] smpboot cpu 1: start_ip = 9a000 Oct 1 13:32:05 Hilbert kernel: [ 0.300018] Brought up 2 CPUs Oct 1 13:32:05 Hilbert kernel: [ 0.300022] Total of 2 processors activated (8775.34 BogoMIPS). Oct 1 13:32:05 Hilbert kernel: [ 0.301276] devtmpfs: initialized Oct 1 13:32:05 Hilbert kernel: [ 0.301427] print_constraints: dummy: Oct 1 13:32:05 Hilbert kernel: [ 0.301461] Time: 11:31:54 Date: 10/01/11 Oct 1 13:32:05 Hilbert kernel: [ 0.301497] NET: Registered protocol family 16 Oct 1 13:32:05 Hilbert kernel: [ 0.301527] Trying to unpack rootfs image as initramfs... Oct 1 13:32:05 Hilbert kernel: [ 0.301628] ACPI: bus type pci registered Oct 1 13:32:05 Hilbert kernel: [ 0.301691] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000) Oct 1 13:32:05 Hilbert kernel: [ 0.301694] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820 Oct 1 13:32:05 Hilbert kernel: [ 0.310086] PCI: Using configuration type 1 for base access Oct 1 13:32:05 Hilbert kernel: [ 0.310093] dmi type 0xB1 record - unknown flag Oct 1 13:32:05 Hilbert kernel: [ 0.310938] bio: create slab at 0 Oct 1 13:32:05 Hilbert kernel: [ 0.312147] ACPI: EC: Look up EC in DSDT Oct 1 13:32:05 Hilbert kernel: [ 0.319497] ACPI: SSDT 000000007fe6e4f2 00286 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) Oct 1 13:32:05 Hilbert kernel: [ 0.319766] ACPI: Dynamic OEM Table Load: Oct 1 13:32:05 Hilbert kernel: [ 0.319769] ACPI: SSDT (null) 00286 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) Oct 1 13:32:05 Hilbert kernel: [ 0.319875] ACPI: SSDT 000000007fe6de88 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) Oct 1 13:32:05 Hilbert kernel: [ 0.320157] ACPI: Dynamic OEM Table Load: Oct 1 13:32:05 Hilbert kernel: [ 0.320160] ACPI: SSDT (null) 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) Oct 1 13:32:05 Hilbert kernel: [ 0.320348] ACPI: SSDT 000000007fe6e778 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) Oct 1 13:32:05 Hilbert kernel: [ 0.320609] ACPI: Dynamic OEM Table Load: Oct 1 13:32:05 Hilbert kernel: [ 0.320612] ACPI: SSDT (null) 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) Oct 1 13:32:05 Hilbert kernel: [ 0.320683] ACPI: SSDT 000000007fe6e46d 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) Oct 1 13:32:05 Hilbert kernel: [ 0.320937] ACPI: Dynamic OEM Table Load: Oct 1 13:32:05 Hilbert kernel: [ 0.320940] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) Oct 1 13:32:05 Hilbert kernel: [ 0.321103] ACPI: Interpreter enabled Oct 1 13:32:05 Hilbert kernel: [ 0.321107] ACPI: (supports S0 S3 S4 S5) Oct 1 13:32:05 Hilbert kernel: [ 0.321123] ACPI: Using IOAPIC for interrupt routing Oct 1 13:32:05 Hilbert kernel: [ 0.354776] ACPI: No dock devices found. Oct 1 13:32:05 Hilbert kernel: [ 0.354780] HEST: Table not found. Oct 1 13:32:05 Hilbert kernel: [ 0.354783] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug Oct 1 13:32:05 Hilbert kernel: [ 0.363433] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) Oct 1 13:32:05 Hilbert kernel: [ 0.380842] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) Oct 1 13:32:05 Hilbert kernel: [ 0.380846] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) Oct 1 13:32:05 Hilbert kernel: [ 0.380849] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) Oct 1 13:32:05 Hilbert kernel: [ 0.380852] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) Oct 1 13:32:05 Hilbert kernel: [ 0.380854] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xf3ffffff] (ignored) Oct 1 13:32:05 Hilbert kernel: [ 0.380857] pci_root PNP0A03:00: host bridge window [mem 0xf8000000-0xfebfffff] (ignored) Oct 1 13:32:05 Hilbert kernel: [ 0.380859] pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff] (ignored) Oct 1 13:32:05 Hilbert kernel: [ 0.380862] pci_root PNP0A03:00: host bridge window [mem 0xfed1c000-0xfed1ffff] (ignored) Oct 1 13:32:05 Hilbert kernel: [ 0.380865] pci_root PNP0A03:00: host bridge window [mem 0xfed90000-0xfed9ffff] (ignored) Oct 1 13:32:05 Hilbert kernel: [ 0.380867] pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff] (ignored) Oct 1 13:32:05 Hilbert kernel: [ 0.380870] pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff] (ignored) Oct 1 13:32:05 Hilbert kernel: [ 0.380872] pci_root PNP0A03:00: host bridge window [mem 0xffb00000-0xffefffff] (ignored) Oct 1 13:32:05 Hilbert kernel: [ 0.380886] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600 Oct 1 13:32:05 Hilbert kernel: [ 0.380933] pci 0000:00:01.0: [8086:2a01] type 1 class 0x000604 Oct 1 13:32:05 Hilbert kernel: [ 0.380970] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold Oct 1 13:32:05 Hilbert kernel: [ 0.380974] pci 0000:00:01.0: PME# disabled Oct 1 13:32:05 Hilbert kernel: [ 0.381029] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03 Oct 1 13:32:05 Hilbert kernel: [ 0.381088] pci 0000:00:1a.0: reg 20: [io 0x6f20-0x6f3f] Oct 1 13:32:05 Hilbert kernel: [ 0.381130] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03 Oct 1 13:32:05 Hilbert kernel: [ 0.381189] pci 0000:00:1a.1: reg 20: [io 0x6f00-0x6f1f] Oct 1 13:32:05 Hilbert kernel: [ 0.381247] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03 Oct 1 13:32:05 Hilbert kernel: [ 0.381273] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff] Oct 1 13:32:05 Hilbert kernel: [ 0.381365] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold Oct 1 13:32:05 Hilbert kernel: [ 0.381371] pci 0000:00:1a.7: PME# disabled Oct 1 13:32:05 Hilbert kernel: [ 0.381402] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403 Oct 1 13:32:05 Hilbert kernel: [ 0.381425] pci 0000:00:1b.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit] Oct 1 13:32:05 Hilbert kernel: [ 0.381512] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold Oct 1 13:32:05 Hilbert kernel: [ 0.381517] pci 0000:00:1b.0: PME# disabled Oct 1 13:32:05 Hilbert kernel: [ 0.381547] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604 Oct 1 13:32:05 Hilbert kernel: [ 0.381637] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Oct 1 13:32:05 Hilbert kernel: [ 0.381642] pci 0000:00:1c.0: PME# disabled Oct 1 13:32:05 Hilbert kernel: [ 0.381677] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604 Oct 1 13:32:05 Hilbert kernel: [ 0.381766] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold Oct 1 13:32:05 Hilbert kernel: [ 0.381771] pci 0000:00:1c.1: PME# disabled Oct 1 13:32:05 Hilbert kernel: [ 0.381806] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604 Oct 1 13:32:05 Hilbert kernel: [ 0.381895] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold Oct 1 13:32:05 Hilbert kernel: [ 0.381900] pci 0000:00:1c.3: PME# disabled Oct 1 13:32:05 Hilbert kernel: [ 0.381935] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03 Oct 1 13:32:05 Hilbert kernel: [ 0.381994] pci 0000:00:1d.0: reg 20: [io 0x6f80-0x6f9f] Oct 1 13:32:05 Hilbert kernel: [ 0.382036] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03 Oct 1 13:32:05 Hilbert kernel: [ 0.382095] pci 0000:00:1d.1: reg 20: [io 0x6f60-0x6f7f] Oct 1 13:32:05 Hilbert kernel: [ 0.382137] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03 Oct 1 13:32:05 Hilbert kernel: [ 0.382196] pci 0000:00:1d.2: reg 20: [io 0x6f40-0x6f5f] Oct 1 13:32:05 Hilbert kernel: [ 0.382251] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03 Oct 1 13:32:05 Hilbert kernel: [ 0.382277] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff] Oct 1 13:32:05 Hilbert kernel: [ 0.382371] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold Oct 1 13:32:05 Hilbert kernel: [ 0.382377] pci 0000:00:1d.7: PME# disabled Oct 1 13:32:05 Hilbert kernel: [ 0.382402] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 Oct 1 13:32:05 Hilbert kernel: [ 0.382492] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601 Oct 1 13:32:05 Hilbert kernel: [ 0.382611] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO Oct 1 13:32:05 Hilbert kernel: [ 0.382618] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO Oct 1 13:32:05 Hilbert kernel: [ 0.382623] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) Oct 1 13:32:05 Hilbert kernel: [ 0.382629] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) Oct 1 13:32:05 Hilbert kernel: [ 0.382676] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101 Oct 1 13:32:05 Hilbert kernel: [ 0.382694] pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7] Oct 1 13:32:05 Hilbert kernel: [ 0.382706] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7] Oct 1 13:32:05 Hilbert kernel: [ 0.382719] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177] Oct 1 13:32:05 Hilbert kernel: [ 0.382731] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377] Oct 1 13:32:05 Hilbert kernel: [ 0.382744] pci 0000:00:1f.1: reg 20: [io 0x6fa0-0x6faf] Oct 1 13:32:05 Hilbert kernel: [ 0.382797] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106 Oct 1 13:32:05 Hilbert kernel: [ 0.382826] pci 0000:00:1f.2: reg 10: [io 0x6eb0-0x6eb7] Oct 1 13:32:05 Hilbert kernel: [ 0.382839] pci 0000:00:1f.2: reg 14: [io 0x6eb8-0x6ebb] Oct 1 13:32:05 Hilbert kernel: [ 0.382851] pci 0000:00:1f.2: reg 18: [io 0x6ec0-0x6ec7] Oct 1 13:32:05 Hilbert kernel: [ 0.382864] pci 0000:00:1f.2: reg 1c: [io 0x6ec8-0x6ecb] Oct 1 13:32:05 Hilbert kernel: [ 0.382876] pci 0000:00:1f.2: reg 20: [io 0x6ee0-0x6eff] Oct 1 13:32:05 Hilbert kernel: [ 0.382889] pci 0000:00:1f.2: reg 24: [mem 0xfebfb800-0xfebfbfff] Oct 1 13:32:05 Hilbert kernel: [ 0.382938] pci 0000:00:1f.2: PME# supported from D3hot Oct 1 13:32:05 Hilbert kernel: [ 0.382943] pci 0000:00:1f.2: PME# disabled Oct 1 13:32:05 Hilbert kernel: [ 0.382966] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05 Oct 1 13:32:05 Hilbert kernel: [ 0.382984] pci 0000:00:1f.3: reg 10: [mem 0xfebfb700-0xfebfb7ff] Oct 1 13:32:05 Hilbert kernel: [ 0.383028] pci 0000:00:1f.3: reg 20: [io 0x10c0-0x10df] Oct 1 13:32:05 Hilbert kernel: [ 0.383119] pci 0000:01:00.0: [10de:0407] type 0 class 0x000300 Oct 1 13:32:05 Hilbert kernel: [ 0.383139] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff] Oct 1 13:32:05 Hilbert kernel: [ 0.383160] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] Oct 1 13:32:05 Hilbert kernel: [ 0.383182] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit] Oct 1 13:32:05 Hilbert kernel: [ 0.383197] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f] Oct 1 13:32:05 Hilbert kernel: [ 0.383211] pci 0000:01:00.0: reg 30: [mem 0xfea00000-0xfea1ffff pref] Oct 1 13:32:05 Hilbert kernel: [ 0.383297] pci 0000:00:01.0: PCI bridge to [bus 01-01] Oct 1 13:32:05 Hilbert kernel: [ 0.383301] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] Oct 1 13:32:05 Hilbert kernel: [ 0.383304] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff] Oct 1 13:32:05 Hilbert kernel: [ 0.383309] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] Oct 1 13:32:05 Hilbert kernel: [ 0.383372] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b] Oct 1 13:32:05 Hilbert kernel: [ 0.383378] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) Oct 1 13:32:05 Hilbert kernel: [ 0.383383] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) Oct 1 13:32:05 Hilbert kernel: [ 0.383392] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Oct 1 13:32:05 Hilbert kernel: [ 0.383555] pci 0000:0c:00.0: [8086:4222] type 0 class 0x000280 Oct 1 13:32:05 Hilbert kernel: [ 0.383612] pci 0000:0c:00.0: reg 10: [mem 0xf9fff000-0xf9ffffff] Oct 1 13:32:05 Hilbert kernel: [ 0.383957] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold Oct 1 13:32:05 Hilbert kernel: [ 0.383970] pci 0000:0c:00.0: PME# disabled Oct 1 13:32:05 Hilbert kernel: [ 0.384041] pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' Oct 1 13:32:05 Hilbert kernel: [ 0.384069] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c] Oct 1 13:32:05 Hilbert kernel: [ 0.384074] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) Oct 1 13:32:05 Hilbert kernel: [ 0.384080] pci 0000:00:1c.1: bridge window [mem 0xf9f00000-0xf9ffffff] Oct 1 13:32:05 Hilbert kernel: [ 0.384088] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Oct 1 13:32:05 Hilbert kernel: [ 0.384153] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e] Oct 1 13:32:05 Hilbert kernel: [ 0.384158] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] Oct 1 13:32:05 Hilbert kernel: [ 0.384163] pci 0000:00:1c.3: bridge window [mem 0xf9c00000-0xf9efffff] Oct 1 13:32:05 Hilbert kernel: [ 0.384172] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] Oct 1 13:32:05 Hilbert kernel: [ 0.384218] pci 0000:03:00.0: [14e4:170c] type 0 class 0x000200 Oct 1 13:32:05 Hilbert kernel: [ 0.384241] pci 0000:03:00.0: reg 10: [mem 0xf9bfe000-0xf9bfffff] Oct 1 13:32:05 Hilbert kernel: [ 0.384328] pci 0000:03:00.0: supports D1 D2 Oct 1 13:32:05 Hilbert kernel: [ 0.384330] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold Oct 1 13:32:05 Hilbert kernel: [ 0.384335] pci 0000:03:00.0: PME# disabled Oct 1 13:32:05 Hilbert kernel: [ 0.384357] pci 0000:03:01.0: [1180:0832] type 0 class 0x000c00 Oct 1 13:32:05 Hilbert kernel: [ 0.384374] pci 0000:03:01.0: proprietary Ricoh MMC controller disabled (via firewire function) Oct 1 13:32:05 Hilbert kernel: [ 0.384376] pci 0000:03:01.0: MMC cards are now supported by standard SDHCI controller Oct 1 13:32:05 Hilbert kernel: [ 0.384393] pci 0000:03:01.0: reg 10: [mem 0xf9bfd800-0xf9bfdfff] Oct 1 13:32:05 Hilbert kernel: [ 0.384484] pci 0000:03:01.0: supports D1 D2 Oct 1 13:32:05 Hilbert kernel: [ 0.384486] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold Oct 1 13:32:05 Hilbert kernel: [ 0.384491] pci 0000:03:01.0: PME# disabled Oct 1 13:32:05 Hilbert kernel: [ 0.384514] pci 0000:03:01.1: [1180:0822] type 0 class 0x000805 Oct 1 13:32:05 Hilbert kernel: [ 0.384539] pci 0000:03:01.1: reg 10: [mem 0xf9bfd400-0xf9bfd4ff] Oct 1 13:32:05 Hilbert kernel: [ 0.384629] pci 0000:03:01.1: supports D1 D2 Oct 1 13:32:05 Hilbert kernel: [ 0.384631] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold Oct 1 13:32:05 Hilbert kernel: [ 0.384636] pci 0000:03:01.1: PME# disabled Oct 1 13:32:05 Hilbert kernel: [ 0.384661] pci 0000:03:01.2: [1180:0592] type 0 class 0x000880 Oct 1 13:32:05 Hilbert kernel: [ 0.384684] pci 0000:03:01.2: reg 10: [mem 0xf9bfd600-0xf9bfd6ff] Oct 1 13:32:05 Hilbert kernel: [ 0.384777] pci 0000:03:01.2: supports D1 D2 Oct 1 13:32:05 Hilbert kernel: [ 0.384779] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold Oct 1 13:32:05 Hilbert kernel: [ 0.384784] pci 0000:03:01.2: PME# disabled Oct 1 13:32:05 Hilbert kernel: [ 0.384806] pci 0000:03:01.3: [1180:0852] type 0 class 0x000880 Oct 1 13:32:05 Hilbert kernel: [ 0.384829] pci 0000:03:01.3: reg 10: [mem 0xf9bfd700-0xf9bfd7ff] Oct 1 13:32:05 Hilbert kernel: [ 0.384920] pci 0000:03:01.3: supports D1 D2 Oct 1 13:32:05 Hilbert kernel: [ 0.384922] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold Oct 1 13:32:05 Hilbert kernel: [ 0.384927] pci 0000:03:01.3: PME# disabled Oct 1 13:32:05 Hilbert kernel: [ 0.385002] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) Oct 1 13:32:05 Hilbert kernel: [ 0.385007] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) Oct 1 13:32:05 Hilbert kernel: [ 0.385013] pci 0000:00:1e.0: bridge window [mem 0xf9b00000-0xf9bfffff] Oct 1 13:32:05 Hilbert kernel: [ 0.385021] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Oct 1 13:32:05 Hilbert kernel: [ 0.385024] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) Oct 1 13:32:05 Hilbert kernel: [ 0.385027] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) Oct 1 13:32:05 Hilbert kernel: [ 0.385061] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Oct 1 13:32:05 Hilbert kernel: [ 0.385257] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] Oct 1 13:32:05 Hilbert kernel: [ 0.385343] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] Oct 1 13:32:05 Hilbert kernel: [ 0.385381] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] Oct 1 13:32:05 Hilbert kernel: [ 0.385421] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] Oct 1 13:32:05 Hilbert kernel: [ 0.385463] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] Oct 1 13:32:05 Hilbert kernel: [ 0.385506] pci0000:00: Requesting ACPI _OSC control (0x1d) Oct 1 13:32:05 Hilbert kernel: [ 0.385509] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d Oct 1 13:32:05 Hilbert kernel: [ 0.385511] ACPI _OSC control for PCIe not granted, disabling ASPM Oct 1 13:32:05 Hilbert kernel: [ 0.393173] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *7 Oct 1 13:32:05 Hilbert kernel: [ 0.393239] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 Oct 1 13:32:05 Hilbert kernel: [ 0.393300] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4 Oct 1 13:32:05 Hilbert kernel: [ 0.393366] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11) Oct 1 13:32:05 Hilbert kernel: [ 0.393428] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Oct 1 13:32:05 Hilbert kernel: [ 0.393493] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Oct 1 13:32:05 Hilbert kernel: [ 0.393557] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) Oct 1 13:32:05 Hilbert kernel: [ 0.393612] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. Oct 1 13:32:05 Hilbert kernel: [ 0.393753] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none Oct 1 13:32:05 Hilbert kernel: [ 0.393759] vgaarb: loaded Oct 1 13:32:05 Hilbert kernel: [ 0.393760] vgaarb: bridge control possible 0000:01:00.0 Oct 1 13:32:05 Hilbert kernel: [ 0.393959] SCSI subsystem initialized Oct 1 13:32:05 Hilbert kernel: [ 0.394044] libata version 3.00 loaded. Oct 1 13:32:05 Hilbert kernel: [ 0.394093] usbcore: registered new interface driver usbfs Oct 1 13:32:05 Hilbert kernel: [ 0.394103] usbcore: registered new interface driver hub Oct 1 13:32:05 Hilbert kernel: [ 0.394132] usbcore: registered new device driver usb Oct 1 13:32:05 Hilbert kernel: [ 0.394219] PCI: Using ACPI for IRQ routing Oct 1 13:32:05 Hilbert kernel: [ 0.396865] PCI: pci_cache_line_size set to 64 bytes Oct 1 13:32:05 Hilbert kernel: [ 0.396993] reserve RAM buffer: 000000000009f000 - 000000000009ffff Oct 1 13:32:05 Hilbert kernel: [ 0.396996] reserve RAM buffer: 000000007fe6d800 - 000000007fffffff Oct 1 13:32:05 Hilbert kernel: [ 0.397103] NetLabel: Initializing Oct 1 13:32:05 Hilbert kernel: [ 0.397105] NetLabel: domain hash size = 128 Oct 1 13:32:05 Hilbert kernel: [ 0.397107] NetLabel: protocols = UNLABELED CIPSOv4 Oct 1 13:32:05 Hilbert kernel: [ 0.397120] NetLabel: unlabeled traffic allowed by default Oct 1 13:32:05 Hilbert kernel: [ 0.397161] HPET: 3 timers in total, 0 timers will be used for per-cpu timer Oct 1 13:32:05 Hilbert kernel: [ 0.397167] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Oct 1 13:32:05 Hilbert kernel: [ 0.397172] hpet0: 3 comparators, 64-bit 14.318180 MHz counter Oct 1 13:32:05 Hilbert kernel: [ 0.400181] Switching to clocksource hpet Oct 1 13:32:05 Hilbert kernel: [ 0.407495] AppArmor: AppArmor Filesystem Enabled Oct 1 13:32:05 Hilbert kernel: [ 0.407530] pnp: PnP ACPI init Oct 1 13:32:05 Hilbert kernel: [ 0.407552] ACPI: bus type pnp registered Oct 1 13:32:05 Hilbert kernel: [ 0.409476] Switched to NOHz mode on CPU #0 Oct 1 13:32:05 Hilbert kernel: [ 0.409704] Switched to NOHz mode on CPU #1 Oct 1 13:32:05 Hilbert kernel: [ 0.416038] pnp 00:00: [bus 00-ff] Oct 1 13:32:05 Hilbert kernel: [ 0.416042] pnp 00:00: [io 0x0000-0x0cf7 window] Oct 1 13:32:05 Hilbert kernel: [ 0.416044] pnp 00:00: [io 0x0cf8-0x0cff] Oct 1 13:32:05 Hilbert kernel: [ 0.416047] pnp 00:00: [io 0x0d00-0xffff window] Oct 1 13:32:05 Hilbert kernel: [ 0.416049] pnp 00:00: [mem 0x000a0000-0x000bffff window] Oct 1 13:32:05 Hilbert kernel: [ 0.416052] pnp 00:00: [mem 0x000d0000-0x000dffff window] Oct 1 13:32:05 Hilbert kernel: [ 0.416054] pnp 00:00: [mem 0x80000000-0xf3ffffff window] Oct 1 13:32:05 Hilbert kernel: [ 0.416056] pnp 00:00: [mem 0xf8000000-0xfebfffff window] Oct 1 13:32:05 Hilbert kernel: [ 0.416059] pnp 00:00: [mem 0xfec10000-0xfecfffff window] Oct 1 13:32:05 Hilbert kernel: [ 0.416061] pnp 00:00: [mem 0xfed1c000-0xfed1ffff window] Oct 1 13:32:05 Hilbert kernel: [ 0.416063] pnp 00:00: [mem 0xfed90000-0xfed9ffff window] Oct 1 13:32:05 Hilbert kernel: [ 0.416065] pnp 00:00: [mem 0xfeda7000-0xfedfffff window] Oct 1 13:32:05 Hilbert kernel: [ 0.416067] pnp 00:00: [mem 0xfee10000-0xff9fffff window] Oct 1 13:32:05 Hilbert kernel: [ 0.416073] pnp 00:00: [mem 0xffb00000-0xffefffff window] Oct 1 13:32:05 Hilbert kernel: [ 0.416167] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) Oct 1 13:32:05 Hilbert kernel: [ 0.416196] pnp 00:01: [irq 12] Oct 1 13:32:05 Hilbert kernel: [ 0.416218] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active) Oct 1 13:32:05 Hilbert kernel: [ 0.416233] pnp 00:02: [io 0x0060] Oct 1 13:32:05 Hilbert kernel: [ 0.416235] pnp 00:02: [io 0x0064] Oct 1 13:32:05 Hilbert kernel: [ 0.416237] pnp 00:02: [io 0x0062] Oct 1 13:32:05 Hilbert kernel: [ 0.416239] pnp 00:02: [io 0x0066] Oct 1 13:32:05 Hilbert kernel: [ 0.416245] pnp 00:02: [irq 1] Oct 1 13:32:05 Hilbert kernel: [ 0.416269] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) Oct 1 13:32:05 Hilbert kernel: [ 0.416283] pnp 00:03: [io 0x0070-0x0071] Oct 1 13:32:05 Hilbert kernel: [ 0.416289] pnp 00:03: [irq 8] Oct 1 13:32:05 Hilbert kernel: [ 0.416291] pnp 00:03: [io 0x0072-0x0077] Oct 1 13:32:05 Hilbert kernel: [ 0.416312] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) Oct 1 13:32:05 Hilbert kernel: [ 0.416328] pnp 00:04: [io 0x0061] Oct 1 13:32:05 Hilbert kernel: [ 0.416330] pnp 00:04: [io 0x0063] Oct 1 13:32:05 Hilbert kernel: [ 0.416332] pnp 00:04: [io 0x0065] Oct 1 13:32:05 Hilbert kernel: [ 0.416334] pnp 00:04: [io 0x0067] Oct 1 13:32:05 Hilbert kernel: [ 0.416356] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) Oct 1 13:32:05 Hilbert kernel: [ 0.416369] pnp 00:05: [io 0x0c80-0x0cff] Oct 1 13:32:05 Hilbert kernel: [ 0.416430] system 00:05: [io 0x0c80-0x0cff] could not be reserved Oct 1 13:32:05 Hilbert kernel: [ 0.416433] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) Oct 1 13:32:05 Hilbert kernel: [ 0.416451] pnp 00:06: [dma 4] Oct 1 13:32:05 Hilbert kernel: [ 0.416453] pnp 00:06: [io 0x0000-0x000f] Oct 1 13:32:05 Hilbert kernel: [ 0.416455] pnp 00:06: [io 0x0080-0x0085] Oct 1 13:32:05 Hilbert kernel: [ 0.416456] pnp 00:06: [io 0x0087-0x008f] Oct 1 13:32:05 Hilbert kernel: [ 0.416458] pnp 00:06: [io 0x00c0-0x00df] Oct 1 13:32:05 Hilbert kernel: [ 0.416460] pnp 00:06: [io 0x0010-0x001f] Oct 1 13:32:05 Hilbert kernel: [ 0.416461] pnp 00:06: [io 0x0090-0x0091] Oct 1 13:32:05 Hilbert kernel: [ 0.416463] pnp 00:06: [io 0x0093-0x009f] Oct 1 13:32:05 Hilbert kernel: [ 0.416486] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active) Oct 1 13:32:05 Hilbert kernel: [ 0.416500] pnp 00:07: [io 0x00f0-0x00ff] Oct 1 13:32:05 Hilbert kernel: [ 0.416506] pnp 00:07: [irq 13] Oct 1 13:32:05 Hilbert kernel: [ 0.416533] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) Oct 1 13:32:05 Hilbert kernel: [ 0.416568] pnp 00:08: [mem 0xfed00000-0xfed003ff] Oct 1 13:32:05 Hilbert kernel: [ 0.416618] system 00:08: [mem 0xfed00000-0xfed003ff] has been reserved Oct 1 13:32:05 Hilbert kernel: [ 0.416622] system 00:08: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) Oct 1 13:32:05 Hilbert kernel: [ 0.416746] pnp 00:09: [io 0x0900-0x097f] Oct 1 13:32:05 Hilbert kernel: [ 0.416748] pnp 00:09: [io 0x0092] Oct 1 13:32:05 Hilbert kernel: [ 0.416750] pnp 00:09: [io 0x00b2-0x00b3] Oct 1 13:32:05 Hilbert kernel: [ 0.416752] pnp 00:09: [io 0x0020-0x0021] Oct 1 13:32:05 Hilbert kernel: [ 0.416753] pnp 00:09: [io 0x00a0-0x00a1] Oct 1 13:32:05 Hilbert kernel: [ 0.416756] pnp 00:09: [irq 0 disabled] Oct 1 13:32:05 Hilbert kernel: [ 0.416758] pnp 00:09: [io 0x04d0-0x04d1] Oct 1 13:32:05 Hilbert kernel: [ 0.416760] pnp 00:09: [io 0x1000-0x1005] Oct 1 13:32:05 Hilbert kernel: [ 0.416761] pnp 00:09: [io 0x1008-0x100f] Oct 1 13:32:05 Hilbert kernel: [ 0.416776] pnp 00:09: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] Oct 1 13:32:05 Hilbert kernel: [ 0.416779] pnp 00:09: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] Oct 1 13:32:05 Hilbert kernel: [ 0.416829] system 00:09: [io 0x0900-0x097f] has been reserved Oct 1 13:32:05 Hilbert kernel: [ 0.416832] system 00:09: [io 0x04d0-0x04d1] has been reserved Oct 1 13:32:05 Hilbert kernel: [ 0.416836] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) Oct 1 13:32:05 Hilbert kernel: [ 0.416852] pnp 00:0a: [io 0xf400-0xf4fe] Oct 1 13:32:05 Hilbert kernel: [ 0.416854] pnp 00:0a: [io 0x0086] Oct 1 13:32:05 Hilbert kernel: [ 0.416856] pnp 00:0a: [io 0x1006-0x1007] Oct 1 13:32:05 Hilbert kernel: [ 0.416858] pnp 00:0a: [io 0x100a-0x1059] Oct 1 13:32:05 Hilbert kernel: [ 0.416860] pnp 00:0a: [io 0x1060-0x107f] Oct 1 13:32:05 Hilbert kernel: [ 0.416862] pnp 00:0a: [io 0x1080-0x10bf] Oct 1 13:32:05 Hilbert kernel: [ 0.416864] pnp 00:0a: [io 0x10c0-0x10df] Oct 1 13:32:05 Hilbert kernel: [ 0.416868] pnp 00:0a: [io 0x1010-0x102f] Oct 1 13:32:05 Hilbert kernel: [ 0.416870] pnp 00:0a: [io 0x0809] Oct 1 13:32:05 Hilbert kernel: [ 0.416884] pnp 00:0a: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] Oct 1 13:32:05 Hilbert kernel: [ 0.416887] pnp 00:0a: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] Oct 1 13:32:05 Hilbert kernel: [ 0.416890] pnp 00:0a: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] Oct 1 13:32:05 Hilbert kernel: [ 0.416894] pnp 00:0a: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] Oct 1 13:32:05 Hilbert kernel: [ 0.416949] system 00:0a: [io 0xf400-0xf4fe] has been reserved Oct 1 13:32:05 Hilbert kernel: [ 0.416952] system 00:0a: [io 0x1080-0x10bf] has been reserved Oct 1 13:32:05 Hilbert kernel: [ 0.416955] system 00:0a: [io 0x10c0-0x10df] has been reserved Oct 1 13:32:05 Hilbert kernel: [ 0.416957] system 00:0a: [io 0x0809] has been reserved Oct 1 13:32:05 Hilbert kernel: [ 0.416961] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) Oct 1 13:32:05 Hilbert kernel: [ 0.426557] pnp 00:0b: [mem 0x00000000-0x0009efff] Oct 1 13:32:05 Hilbert kernel: [ 0.426561] pnp 00:0b: [mem 0x0009f000-0x0009ffff] Oct 1 13:32:05 Hilbert kernel: [ 0.426563] pnp 00:0b: [mem 0x000c0000-0x000cffff] Oct 1 13:32:05 Hilbert kernel: [ 0.426565] pnp 00:0b: [mem 0x000e0000-0x000fffff] Oct 1 13:32:05 Hilbert kernel: [ 0.426568] pnp 00:0b: [mem 0x00100000-0x7fe6d7ff] Oct 1 13:32:05 Hilbert kernel: [ 0.426570] pnp 00:0b: [mem 0x7fe6d800-0x7fefffff] Oct 1 13:32:05 Hilbert kernel: [ 0.426572] pnp 00:0b: [mem 0x7ff00000-0x7fffffff] Oct 1 13:32:05 Hilbert kernel: [ 0.426574] pnp 00:0b: [mem 0x7ff00000-0x806fffff] Oct 1 13:32:05 Hilbert kernel: [ 0.426576] pnp 00:0b: [mem 0xfff00000-0xffffffff] Oct 1 13:32:05 Hilbert kernel: [ 0.426578] pnp 00:0b: [mem 0xffa00000-0xffafffff] Oct 1 13:32:05 Hilbert kernel: [ 0.426580] pnp 00:0b: [mem 0xfec00000-0xfec0ffff] Oct 1 13:32:05 Hilbert kernel: [ 0.426582] pnp 00:0b: [mem 0xfee00000-0xfee0ffff] Oct 1 13:32:05 Hilbert kernel: [ 0.426584] pnp 00:0b: [mem 0xfed20000-0xfed8ffff] Oct 1 13:32:05 Hilbert kernel: [ 0.426586] pnp 00:0b: [mem 0xfeda0000-0xfeda3fff] Oct 1 13:32:05 Hilbert kernel: [ 0.426588] pnp 00:0b: [mem 0xfeda4000-0xfeda4fff] Oct 1 13:32:05 Hilbert kernel: [ 0.426590] pnp 00:0b: [mem 0xfeda5000-0xfeda5fff] Oct 1 13:32:05 Hilbert kernel: [ 0.426592] pnp 00:0b: [mem 0xfeda6000-0xfeda6fff] Oct 1 13:32:05 Hilbert kernel: [ 0.426594] pnp 00:0b: [mem 0xfed18000-0xfed1bfff] Oct 1 13:32:05 Hilbert kernel: [ 0.426596] pnp 00:0b: [mem 0xf4000000-0xf7ffffff] Oct 1 13:32:05 Hilbert kernel: [ 0.426697] system 00:0b: [mem 0x00000000-0x0009efff] could not be reserved Oct 1 13:32:05 Hilbert kernel: [ 0.426701] system 00:0b: [mem 0x0009f000-0x0009ffff] could not be reserved Oct 1 13:32:05 Hilbert kernel: [ 0.426704] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved Oct 1 13:32:05 Hilbert kernel: [ 0.426706] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved Oct 1 13:32:05 Hilbert kernel: [ 0.426709] system 00:0b: [mem 0x00100000-0x7fe6d7ff] could not be reserved Oct 1 13:32:05 Hilbert kernel: [ 0.426712] system 00:0b: [mem 0x7fe6d800-0x7fefffff] has been reserved Oct 1 13:32:05 Hilbert kernel: [ 0.426715] system 00:0b: [mem 0x7ff00000-0x7fffffff] has been reserved Oct 1 13:32:05 Hilbert kernel: [ 0.426718] system 00:0b: [mem 0x7ff00000-0x806fffff] could not be reserved Oct 1 13:32:05 Hilbert kernel: [ 0.426721] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved Oct 1 13:32:05 Hilbert kernel: [ 0.426724] system 00:0b: [mem 0xffa00000-0xffafffff] has been reserved Oct 1 13:32:05 Hilbert kernel: [ 0.426727] system 00:0b: [mem 0xfec00000-0xfec0ffff] could not be reserved Oct 1 13:32:05 Hilbert kernel: [ 0.426730] system 00:0b: [mem 0xfee00000-0xfee0ffff] has been reserved Oct 1 13:32:05 Hilbert kernel: [ 0.426732] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved Oct 1 13:32:05 Hilbert kernel: [ 0.426735] system 00:0b: [mem 0xfeda0000-0xfeda3fff] has been reserved Oct 1 13:32:05 Hilbert kernel: [ 0.426738] system 00:0b: [mem 0xfeda4000-0xfeda4fff] has been reserved Oct 1 13:32:05 Hilbert kernel: [ 0.426741] system 00:0b: [mem 0xfeda5000-0xfeda5fff] has been reserved Oct 1 13:32:05 Hilbert kernel: [ 0.426743] system 00:0b: [mem 0xfeda6000-0xfeda6fff] has been reserved Oct 1 13:32:05 Hilbert kernel: [ 0.426746] system 00:0b: [mem 0xfed18000-0xfed1bfff] has been reserved Oct 1 13:32:05 Hilbert kernel: [ 0.426749] system 00:0b: [mem 0xf4000000-0xf7ffffff] has been reserved Oct 1 13:32:05 Hilbert kernel: [ 0.426753] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) Oct 1 13:32:05 Hilbert kernel: [ 0.426808] pnp: PnP ACPI: found 12 devices Oct 1 13:32:05 Hilbert kernel: [ 0.426811] ACPI: ACPI bus type pnp unregistered Oct 1 13:32:05 Hilbert kernel: [ 0.432895] PCI: max bus depth: 1 pci_try_num: 2 Oct 1 13:32:05 Hilbert kernel: [ 0.432958] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref] Oct 1 13:32:05 Hilbert kernel: [ 0.432962] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff] Oct 1 13:32:05 Hilbert kernel: [ 0.432966] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80200000-0x803fffff] Oct 1 13:32:05 Hilbert kernel: [ 0.432970] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref] Oct 1 13:32:05 Hilbert kernel: [ 0.432973] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff] Oct 1 13:32:05 Hilbert kernel: [ 0.432976] pci 0000:00:01.0: PCI bridge to [bus 01-01] Oct 1 13:32:05 Hilbert kernel: [ 0.432979] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] Oct 1 13:32:05 Hilbert kernel: [ 0.432984] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff] Oct 1 13:32:05 Hilbert kernel: [ 0.432987] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] Oct 1 13:32:05 Hilbert kernel: [ 0.432992] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b] Oct 1 13:32:05 Hilbert kernel: [ 0.432995] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] Oct 1 13:32:05 Hilbert kernel: [ 0.433002] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff] Oct 1 13:32:05 Hilbert kernel: [ 0.433007] pci 0000:00:1c.0: bridge window [mem 0x80400000-0x805fffff 64bit pref] Oct 1 13:32:05 Hilbert kernel: [ 0.433016] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c] Oct 1 13:32:05 Hilbert kernel: [ 0.433019] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] Oct 1 13:32:05 Hilbert kernel: [ 0.433026] pci 0000:00:1c.1: bridge window [mem 0xf9f00000-0xf9ffffff] Oct 1 13:32:05 Hilbert kernel: [ 0.433031] pci 0000:00:1c.1: bridge window [mem 0x80000000-0x801fffff 64bit pref] Oct 1 13:32:05 Hilbert kernel: [ 0.433040] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e] Oct 1 13:32:05 Hilbert kernel: [ 0.433043] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] Oct 1 13:32:05 Hilbert kernel: [ 0.433050] pci 0000:00:1c.3: bridge window [mem 0xf9c00000-0xf9efffff] Oct 1 13:32:05 Hilbert kernel: [ 0.433055] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] Oct 1 13:32:05 Hilbert kernel: [ 0.433064] pci 0000:00:1e.0: PCI bridge to [bus 03-03] Oct 1 13:32:05 Hilbert kernel: [ 0.433066] pci 0000:00:1e.0: bridge window [io disabled] Oct 1 13:32:05 Hilbert kernel: [ 0.433072] pci 0000:00:1e.0: bridge window [mem 0xf9b00000-0xf9bfffff] Oct 1 13:32:05 Hilbert kernel: [ 0.433077] pci 0000:00:1e.0: bridge window [mem pref disabled] Oct 1 13:32:05 Hilbert kernel: [ 0.433108] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Oct 1 13:32:05 Hilbert kernel: [ 0.433112] pci 0000:00:01.0: setting latency timer to 64 Oct 1 13:32:05 Hilbert kernel: [ 0.433120] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Oct 1 13:32:05 Hilbert kernel: [ 0.433125] pci 0000:00:1c.0: setting latency timer to 64 Oct 1 13:32:05 Hilbert kernel: [ 0.433136] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Oct 1 13:32:05 Hilbert kernel: [ 0.433141] pci 0000:00:1c.1: setting latency timer to 64 Oct 1 13:32:05 Hilbert kernel: [ 0.433152] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 Oct 1 13:32:05 Hilbert kernel: [ 0.433157] pci 0000:00:1c.3: setting latency timer to 64 Oct 1 13:32:05 Hilbert kernel: [ 0.433166] pci 0000:00:1e.0: setting latency timer to 64 Oct 1 13:32:05 Hilbert kernel: [ 0.433171] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] Oct 1 13:32:05 Hilbert kernel: [ 0.433173] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff] Oct 1 13:32:05 Hilbert kernel: [ 0.433176] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] Oct 1 13:32:05 Hilbert kernel: [ 0.433178] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfeafffff] Oct 1 13:32:05 Hilbert kernel: [ 0.433181] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] Oct 1 13:32:05 Hilbert kernel: [ 0.433183] pci_bus 0000:0b: resource 0 [io 0x3000-0x3fff] Oct 1 13:32:05 Hilbert kernel: [ 0.433185] pci_bus 0000:0b: resource 1 [mem 0x80200000-0x803fffff] Oct 1 13:32:05 Hilbert kernel: [ 0.433188] pci_bus 0000:0b: resource 2 [mem 0x80400000-0x805fffff 64bit pref] Oct 1 13:32:05 Hilbert kernel: [ 0.433190] pci_bus 0000:0c: resource 0 [io 0x2000-0x2fff] Oct 1 13:32:05 Hilbert kernel: [ 0.433192] pci_bus 0000:0c: resource 1 [mem 0xf9f00000-0xf9ffffff] Oct 1 13:32:05 Hilbert kernel: [ 0.433195] pci_bus 0000:0c: resource 2 [mem 0x80000000-0x801fffff 64bit pref] Oct 1 13:32:05 Hilbert kernel: [ 0.433197] pci_bus 0000:0d: resource 0 [io 0xd000-0xdfff] Oct 1 13:32:05 Hilbert kernel: [ 0.433200] pci_bus 0000:0d: resource 1 [mem 0xf9c00000-0xf9efffff] Oct 1 13:32:05 Hilbert kernel: [ 0.433202] pci_bus 0000:0d: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] Oct 1 13:32:05 Hilbert kernel: [ 0.433204] pci_bus 0000:03: resource 1 [mem 0xf9b00000-0xf9bfffff] Oct 1 13:32:05 Hilbert kernel: [ 0.433207] pci_bus 0000:03: resource 4 [io 0x0000-0xffff] Oct 1 13:32:05 Hilbert kernel: [ 0.433209] pci_bus 0000:03: resource 5 [mem 0x00000000-0xfffffffff] Oct 1 13:32:05 Hilbert kernel: [ 0.433251] NET: Registered protocol family 2 Oct 1 13:32:05 Hilbert kernel: [ 0.433368] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) Oct 1 13:32:05 Hilbert kernel: [ 0.434102] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) Oct 1 13:32:05 Hilbert kernel: [ 0.436277] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) Oct 1 13:32:05 Hilbert kernel: [ 0.436860] TCP: Hash tables configured (established 262144 bind 65536) Oct 1 13:32:05 Hilbert kernel: [ 0.436863] TCP reno registered Oct 1 13:32:05 Hilbert kernel: [ 0.436871] UDP hash table entries: 1024 (order: 3, 32768 bytes) Oct 1 13:32:05 Hilbert kernel: [ 0.436895] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) Oct 1 13:32:05 Hilbert kernel: [ 0.437042] NET: Registered protocol family 1 Oct 1 13:32:05 Hilbert kernel: [ 0.437258] pci 0000:01:00.0: Boot video device Oct 1 13:32:05 Hilbert kernel: [ 0.437283] PCI: CLS 64 bytes, default 64 Oct 1 13:32:05 Hilbert kernel: [ 0.437310] Simple Boot Flag at 0x79 set to 0x1 Oct 1 13:32:05 Hilbert kernel: [ 0.437655] audit: initializing netlink socket (disabled) Oct 1 13:32:05 Hilbert kernel: [ 0.437666] type=2000 audit(1317468713.430:1): initialized Oct 1 13:32:05 Hilbert kernel: [ 0.470211] HugeTLB registered 2 MB page size, pre-allocated 0 pages Oct 1 13:32:05 Hilbert kernel: [ 0.482898] VFS: Disk quotas dquot_6.5.2 Oct 1 13:32:05 Hilbert kernel: [ 0.482961] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Oct 1 13:32:05 Hilbert kernel: [ 0.483555] fuse init (API version 7.16) Oct 1 13:32:05 Hilbert kernel: [ 0.483640] msgmni has been set to 3982 Oct 1 13:32:05 Hilbert kernel: [ 0.483967] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Oct 1 13:32:05 Hilbert kernel: [ 0.483999] io scheduler noop registered Oct 1 13:32:05 Hilbert kernel: [ 0.484001] io scheduler deadline registered Oct 1 13:32:05 Hilbert kernel: [ 0.484039] io scheduler cfq registered (default) Oct 1 13:32:05 Hilbert kernel: [ 0.484154] pcieport 0000:00:01.0: setting latency timer to 64 Oct 1 13:32:05 Hilbert kernel: [ 0.484189] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X Oct 1 13:32:05 Hilbert kernel: [ 0.484239] pcieport 0000:00:1c.0: setting latency timer to 64 Oct 1 13:32:05 Hilbert kernel: [ 0.484296] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X Oct 1 13:32:05 Hilbert kernel: [ 0.484374] pcieport 0000:00:1c.1: setting latency timer to 64 Oct 1 13:32:05 Hilbert kernel: [ 0.484431] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X Oct 1 13:32:05 Hilbert kernel: [ 0.484511] pcieport 0000:00:1c.3: setting latency timer to 64 Oct 1 13:32:05 Hilbert kernel: [ 0.484568] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X Oct 1 13:32:05 Hilbert kernel: [ 0.484663] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Oct 1 13:32:05 Hilbert kernel: [ 0.484685] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 Oct 1 13:32:05 Hilbert kernel: [ 0.484730] intel_idle: MWAIT substates: 0x22220 Oct 1 13:32:05 Hilbert kernel: [ 0.484732] intel_idle: does not run on family 6 model 15 Oct 1 13:32:05 Hilbert kernel: [ 0.484806] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared Oct 1 13:32:05 Hilbert kernel: [ 0.484853] ACPI: AC Adapter [AC] (on-line) Oct 1 13:32:05 Hilbert kernel: [ 0.484923] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 Oct 1 13:32:05 Hilbert kernel: [ 0.485318] ACPI: Lid Switch [LID] Oct 1 13:32:05 Hilbert kernel: [ 0.485361] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 Oct 1 13:32:05 Hilbert kernel: [ 0.485366] ACPI: Power Button [PBTN] Oct 1 13:32:05 Hilbert kernel: [ 0.485405] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 Oct 1 13:32:05 Hilbert kernel: [ 0.485409] ACPI: Sleep Button [SBTN] Oct 1 13:32:05 Hilbert kernel: [ 0.485433] ACPI: acpi_idle registered with cpuidle Oct 1 13:32:05 Hilbert kernel: [ 0.485578] Monitor-Mwait will be used to enter C-1 state Oct 1 13:32:05 Hilbert kernel: [ 0.485608] Monitor-Mwait will be used to enter C-2 state Oct 1 13:32:05 Hilbert kernel: [ 0.485632] Monitor-Mwait will be used to enter C-3 state Oct 1 13:32:05 Hilbert kernel: [ 0.485637] Marking TSC unstable due to TSC halts in idle Oct 1 13:32:05 Hilbert kernel: [ 0.515151] thermal LNXTHERM:00: registered as thermal_zone0 Oct 1 13:32:05 Hilbert kernel: [ 0.515154] ACPI: Thermal Zone [THM] (32 C) Oct 1 13:32:05 Hilbert kernel: [ 0.515181] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared Oct 1 13:32:05 Hilbert kernel: [ 0.515231] ERST: Table is not found! Oct 1 13:32:05 Hilbert kernel: [ 0.530115] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled Oct 1 13:32:05 Hilbert kernel: [ 0.533711] ACPI: Battery Slot [BAT0] (battery present) Oct 1 13:32:05 Hilbert kernel: [ 0.645768] Freeing initrd memory: 13416k freed Oct 1 13:32:05 Hilbert kernel: [ 0.711567] Linux agpgart interface v0.103 Oct 1 13:32:05 Hilbert kernel: [ 0.712796] brd: module loaded Oct 1 13:32:05 Hilbert kernel: [ 0.713304] loop: module loaded Oct 1 13:32:05 Hilbert kernel: [ 0.713449] ata_piix 0000:00:1f.1: version 2.13 Oct 1 13:32:05 Hilbert kernel: [ 0.713464] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Oct 1 13:32:05 Hilbert kernel: [ 0.713509] ata_piix 0000:00:1f.1: setting latency timer to 64 Oct 1 13:32:05 Hilbert kernel: [ 0.713826] scsi0 : ata_piix Oct 1 13:32:05 Hilbert kernel: [ 0.713919] scsi1 : ata_piix Oct 1 13:32:05 Hilbert kernel: [ 0.714206] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 Oct 1 13:32:05 Hilbert kernel: [ 0.714209] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 Oct 1 13:32:05 Hilbert kernel: [ 0.714259] ata2: port disabled. ignoring. Oct 1 13:32:05 Hilbert kernel: [ 0.714516] Fixed MDIO Bus: probed Oct 1 13:32:05 Hilbert kernel: [ 0.714541] PPP generic driver version 2.4.2 Oct 1 13:32:05 Hilbert kernel: [ 0.714580] tun: Universal TUN/TAP device driver, 1.6 Oct 1 13:32:05 Hilbert kernel: [ 0.714582] tun: (C) 1999-2004 Max Krasnyansky Oct 1 13:32:05 Hilbert kernel: [ 0.714657] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Oct 1 13:32:05 Hilbert kernel: [ 0.714681] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 Oct 1 13:32:05 Hilbert kernel: [ 0.714695] ehci_hcd 0000:00:1a.7: setting latency timer to 64 Oct 1 13:32:05 Hilbert kernel: [ 0.714699] ehci_hcd 0000:00:1a.7: EHCI Host Controller Oct 1 13:32:05 Hilbert kernel: [ 0.714734] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 Oct 1 13:32:05 Hilbert kernel: [ 0.714770] ehci_hcd 0000:00:1a.7: debug port 1 Oct 1 13:32:05 Hilbert kernel: [ 0.718644] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported Oct 1 13:32:05 Hilbert kernel: [ 0.718661] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 Oct 1 13:32:05 Hilbert kernel: [ 0.740018] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 Oct 1 13:32:05 Hilbert kernel: [ 0.740126] hub 1-0:1.0: USB hub found Oct 1 13:32:05 Hilbert kernel: [ 0.740131] hub 1-0:1.0: 4 ports detected Oct 1 13:32:05 Hilbert kernel: [ 0.740202] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Oct 1 13:32:05 Hilbert kernel: [ 0.740215] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Oct 1 13:32:05 Hilbert kernel: [ 0.740219] ehci_hcd 0000:00:1d.7: EHCI Host Controller Oct 1 13:32:05 Hilbert kernel: [ 0.740257] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 Oct 1 13:32:05 Hilbert kernel: [ 0.740290] ehci_hcd 0000:00:1d.7: debug port 1 Oct 1 13:32:05 Hilbert kernel: [ 0.744158] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported Oct 1 13:32:05 Hilbert kernel: [ 0.744173] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 Oct 1 13:32:05 Hilbert kernel: [ 0.760015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Oct 1 13:32:05 Hilbert kernel: [ 0.760125] hub 2-0:1.0: USB hub found Oct 1 13:32:05 Hilbert kernel: [ 0.760129] hub 2-0:1.0: 6 ports detected Oct 1 13:32:05 Hilbert kernel: [ 0.760208] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Oct 1 13:32:05 Hilbert kernel: [ 0.760220] uhci_hcd: USB Universal Host Controller Interface driver Oct 1 13:32:05 Hilbert kernel: [ 0.760243] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Oct 1 13:32:05 Hilbert kernel: [ 0.760250] uhci_hcd 0000:00:1a.0: setting latency timer to 64 Oct 1 13:32:05 Hilbert kernel: [ 0.760254] uhci_hcd 0000:00:1a.0: UHCI Host Controller Oct 1 13:32:05 Hilbert kernel: [ 0.760283] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 Oct 1 13:32:05 Hilbert kernel: [ 0.760314] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 Oct 1 13:32:05 Hilbert kernel: [ 0.760423] hub 3-0:1.0: USB hub found Oct 1 13:32:05 Hilbert kernel: [ 0.760428] hub 3-0:1.0: 2 ports detected Oct 1 13:32:05 Hilbert kernel: [ 0.760495] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 Oct 1 13:32:05 Hilbert kernel: [ 0.760502] uhci_hcd 0000:00:1a.1: setting latency timer to 64 Oct 1 13:32:05 Hilbert kernel: [ 0.760506] uhci_hcd 0000:00:1a.1: UHCI Host Controller Oct 1 13:32:05 Hilbert kernel: [ 0.760548] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 Oct 1 13:32:05 Hilbert kernel: [ 0.760585] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 Oct 1 13:32:05 Hilbert kernel: [ 0.760699] hub 4-0:1.0: USB hub found Oct 1 13:32:05 Hilbert kernel: [ 0.760703] hub 4-0:1.0: 2 ports detected Oct 1 13:32:05 Hilbert kernel: [ 0.760766] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Oct 1 13:32:05 Hilbert kernel: [ 0.760772] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Oct 1 13:32:05 Hilbert kernel: [ 0.760776] uhci_hcd 0000:00:1d.0: UHCI Host Controller Oct 1 13:32:05 Hilbert kernel: [ 0.760808] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 Oct 1 13:32:05 Hilbert kernel: [ 0.760836] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 Oct 1 13:32:05 Hilbert kernel: [ 0.760948] hub 5-0:1.0: USB hub found Oct 1 13:32:05 Hilbert kernel: [ 0.760952] hub 5-0:1.0: 2 ports detected Oct 1 13:32:05 Hilbert kernel: [ 0.761015] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 Oct 1 13:32:05 Hilbert kernel: [ 0.761021] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Oct 1 13:32:05 Hilbert kernel: [ 0.761025] uhci_hcd 0000:00:1d.1: UHCI Host Controller Oct 1 13:32:05 Hilbert kernel: [ 0.761055] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 Oct 1 13:32:05 Hilbert kernel: [ 0.761083] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 Oct 1 13:32:05 Hilbert kernel: [ 0.761195] hub 6-0:1.0: USB hub found Oct 1 13:32:05 Hilbert kernel: [ 0.761199] hub 6-0:1.0: 2 ports detected Oct 1 13:32:05 Hilbert kernel: [ 0.761260] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 Oct 1 13:32:05 Hilbert kernel: [ 0.761267] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Oct 1 13:32:05 Hilbert kernel: [ 0.761270] uhci_hcd 0000:00:1d.2: UHCI Host Controller Oct 1 13:32:05 Hilbert kernel: [ 0.761307] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 Oct 1 13:32:05 Hilbert kernel: [ 0.761335] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 Oct 1 13:32:05 Hilbert kernel: [ 0.761443] hub 7-0:1.0: USB hub found Oct 1 13:32:05 Hilbert kernel: [ 0.761447] hub 7-0:1.0: 2 ports detected Oct 1 13:32:05 Hilbert kernel: [ 0.761552] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 Oct 1 13:32:05 Hilbert kernel: [ 0.764354] serio: i8042 KBD port at 0x60,0x64 irq 1 Oct 1 13:32:05 Hilbert kernel: [ 0.764361] serio: i8042 AUX port at 0x60,0x64 irq 12 Oct 1 13:32:05 Hilbert kernel: [ 0.764469] mousedev: PS/2 mouse device common for all mice Oct 1 13:32:05 Hilbert kernel: [ 0.764609] rtc_cmos 00:03: RTC can wake from S4 Oct 1 13:32:05 Hilbert kernel: [ 0.764735] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 Oct 1 13:32:05 Hilbert kernel: [ 0.764768] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs Oct 1 13:32:05 Hilbert kernel: [ 0.764871] device-mapper: uevent: version 1.0.3 Oct 1 13:32:05 Hilbert kernel: [ 0.764941] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com Oct 1 13:32:05 Hilbert kernel: [ 0.765002] cpuidle: using governor ladder Oct 1 13:32:05 Hilbert kernel: [ 0.765085] cpuidle: using governor menu Oct 1 13:32:05 Hilbert kernel: [ 0.765087] EFI Variables Facility v0.08 2004-May-17 Oct 1 13:32:05 Hilbert kernel: [ 0.765336] TCP cubic registered Oct 1 13:32:05 Hilbert kernel: [ 0.765457] NET: Registered protocol family 10 Oct 1 13:32:05 Hilbert kernel: [ 0.765919] NET: Registered protocol family 17 Oct 1 13:32:05 Hilbert kernel: [ 0.765935] Registering the dns_resolver key type Oct 1 13:32:05 Hilbert kernel: [ 0.766023] PM: Hibernation image not present or could not be loaded. Oct 1 13:32:05 Hilbert kernel: [ 0.766037] registered taskstats version 1 Oct 1 13:32:05 Hilbert kernel: [ 0.773405] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 Oct 1 13:32:05 Hilbert kernel: [ 0.778832] Magic number: 15:740:528 Oct 1 13:32:05 Hilbert kernel: [ 0.778953] rtc_cmos 00:03: setting system clock to 2011-10-01 11:31:54 UTC (1317468714) Oct 1 13:32:05 Hilbert kernel: [ 0.779810] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found Oct 1 13:32:05 Hilbert kernel: [ 0.779813] EDD information not available. Oct 1 13:32:05 Hilbert kernel: [ 0.900537] ata1.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, D200, max UDMA/33 Oct 1 13:32:05 Hilbert kernel: [ 0.960525] ata1.00: configured for UDMA/33 Oct 1 13:32:05 Hilbert kernel: [ 0.968683] scsi 0:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632H D200 PQ: 0 ANSI: 5 Oct 1 13:32:05 Hilbert kernel: [ 0.974745] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Oct 1 13:32:05 Hilbert kernel: [ 0.974750] cdrom: Uniform CD-ROM driver Revision: 3.20 Oct 1 13:32:05 Hilbert kernel: [ 0.974912] sr 0:0:0:0: Attached scsi CD-ROM sr0 Oct 1 13:32:05 Hilbert kernel: [ 0.974999] sr 0:0:0:0: Attached scsi generic sg0 type 5 Oct 1 13:32:05 Hilbert kernel: [ 0.976731] Freeing unused kernel memory: 984k freed Oct 1 13:32:05 Hilbert kernel: [ 0.977059] Write protecting the kernel read-only data: 10240k Oct 1 13:32:05 Hilbert kernel: [ 0.977330] Freeing unused kernel memory: 20k freed Oct 1 13:32:05 Hilbert kernel: [ 0.981856] Freeing unused kernel memory: 1400k freed Oct 1 13:32:05 Hilbert kernel: [ 1.049634] ahci 0000:00:1f.2: version 3.0 Oct 1 13:32:05 Hilbert kernel: [ 1.049652] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Oct 1 13:32:05 Hilbert kernel: [ 1.049711] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X Oct 1 13:32:05 Hilbert kernel: [ 1.049782] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode Oct 1 13:32:05 Hilbert kernel: [ 1.049786] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems Oct 1 13:32:05 Hilbert kernel: [ 1.049792] ahci 0000:00:1f.2: setting latency timer to 64 Oct 1 13:32:05 Hilbert kernel: [ 1.058084] firewire_ohci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 Oct 1 13:32:05 Hilbert kernel: [ 1.062364] scsi2 : ahci Oct 1 13:32:05 Hilbert kernel: [ 1.065984] scsi3 : ahci Oct 1 13:32:05 Hilbert kernel: [ 1.067277] scsi4 : ahci Oct 1 13:32:05 Hilbert kernel: [ 1.067448] ata3: SATA max UDMA/133 abar m2048@0xfebfb800 port 0xfebfb900 irq 44 Oct 1 13:32:05 Hilbert kernel: [ 1.067451] ata4: DUMMY Oct 1 13:32:05 Hilbert kernel: [ 1.067455] ata5: SATA max UDMA/133 abar m2048@0xfebfb800 port 0xfebfba00 irq 44 Oct 1 13:32:05 Hilbert kernel: [ 1.086381] sdhci: Secure Digital Host Controller Interface driver Oct 1 13:32:05 Hilbert kernel: [ 1.086384] sdhci: Copyright(c) Pierre Ossman Oct 1 13:32:05 Hilbert kernel: [ 1.130542] firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1 Oct 1 13:32:05 Hilbert kernel: [ 1.250171] usb 2-2: new high speed USB device number 3 using ehci_hcd Oct 1 13:32:05 Hilbert kernel: [ 1.410103] ata5: SATA link down (SStatus 0 SControl 300) Oct 1 13:32:05 Hilbert kernel: [ 1.410153] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 1 13:32:05 Hilbert kernel: [ 1.411396] ata3.00: ATA-7: ST9200420AS, 3.ADC, max UDMA/133 Oct 1 13:32:05 Hilbert kernel: [ 1.411401] ata3.00: 390721968 sectors, multi 8: LBA48 NCQ (depth 31/32) Oct 1 13:32:05 Hilbert kernel: [ 1.412925] ata3.00: configured for UDMA/133 Oct 1 13:32:05 Hilbert kernel: [ 1.413128] scsi 2:0:0:0: Direct-Access ATA ST9200420AS 3.AD PQ: 0 ANSI: 5 Oct 1 13:32:05 Hilbert kernel: [ 1.413286] sd 2:0:0:0: Attached scsi generic sg1 type 0 Oct 1 13:32:05 Hilbert kernel: [ 1.413314] sd 2:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB) Oct 1 13:32:05 Hilbert kernel: [ 1.413372] sd 2:0:0:0: [sda] Write Protect is off Oct 1 13:32:05 Hilbert kernel: [ 1.413375] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 Oct 1 13:32:05 Hilbert kernel: [ 1.413413] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 1 13:32:05 Hilbert kernel: [ 1.451332] sda: sda1 sda2 sda3 < sda5 > Oct 1 13:32:05 Hilbert kernel: [ 1.451874] sd 2:0:0:0: [sda] Attached SCSI disk Oct 1 13:32:05 Hilbert kernel: [ 1.452585] b44 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Oct 1 13:32:05 Hilbert kernel: [ 1.510088] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) Oct 1 13:32:05 Hilbert kernel: [ 1.510100] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) Oct 1 13:32:05 Hilbert kernel: [ 1.510109] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) Oct 1 13:32:05 Hilbert kernel: [ 1.540051] usb 2-6: new high speed USB device number 4 using ehci_hcd Oct 1 13:32:05 Hilbert kernel: [ 1.600145] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 Oct 1 13:32:05 Hilbert kernel: [ 1.600172] b44: b44.c:v2.0 Oct 1 13:32:05 Hilbert kernel: [ 1.600261] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22) Oct 1 13:32:05 Hilbert kernel: [ 1.600288] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 Oct 1 13:32:05 Hilbert kernel: [ 1.601344] mmc0: no vmmc regulator found Oct 1 13:32:05 Hilbert kernel: [ 1.602376] Registered led device: mmc0:: Oct 1 13:32:05 Hilbert kernel: [ 1.603428] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA Oct 1 13:32:05 Hilbert kernel: [ 1.630181] firewire_core: created device fw0: GUID 484fc000188ba470, S400 Oct 1 13:32:05 Hilbert kernel: [ 1.652879] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:1d:09:a8:97:4c Oct 1 13:32:05 Hilbert kernel: [ 1.782540] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) Oct 1 13:32:05 Hilbert kernel: [ 1.990253] usb 3-2: new full speed USB device number 2 using uhci_hcd Oct 1 13:32:05 Hilbert kernel: [ 2.192492] hub 3-2:1.0: USB hub found Oct 1 13:32:05 Hilbert kernel: [ 2.194434] hub 3-2:1.0: 3 ports detected Oct 1 13:32:05 Hilbert kernel: [ 2.470055] usb 5-1: new low speed USB device number 2 using uhci_hcd Oct 1 13:32:05 Hilbert kernel: [ 2.771457] usb 3-2.1: new full speed USB device number 3 using uhci_hcd Oct 1 13:32:05 Hilbert kernel: [ 2.991464] usb 3-2.2: new full speed USB device number 4 using uhci_hcd Oct 1 13:32:05 Hilbert kernel: [ 3.211467] usb 3-2.3: new full speed USB device number 5 using uhci_hcd Oct 1 13:32:05 Hilbert kernel: [ 3.821063] Adding 1950716k swap on /dev/sda5. Priority:-1 extents:1 across:1950716k Oct 1 13:32:05 Hilbert kernel: [ 4.689493] lp: driver loaded but no devices found Oct 1 13:32:05 Hilbert kernel: [ 5.199503] wmi: Mapper loaded Oct 1 13:32:05 Hilbert kernel: [ 5.251637] acpi device:31: registered as cooling_device2 Oct 1 13:32:05 Hilbert kernel: [ 5.252255] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2e/LNXVIDEO:00/input/input4 Oct 1 13:32:05 Hilbert kernel: [ 5.252367] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) Oct 1 13:32:05 Hilbert kernel: [ 5.252412] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. Oct 1 13:32:05 Hilbert kernel: [ 5.391904] cfg80211: Calling CRDA to update world regulatory domain Oct 1 13:32:05 Hilbert kernel: [ 5.840210] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) Oct 1 13:32:05 Hilbert kernel: [ 5.864666] Bluetooth: Core ver 2.16 Oct 1 13:32:05 Hilbert kernel: [ 5.864694] NET: Registered protocol family 31 Oct 1 13:32:05 Hilbert kernel: [ 5.864695] Bluetooth: HCI device and connection manager initialized Oct 1 13:32:05 Hilbert kernel: [ 5.864698] Bluetooth: HCI socket layer initialized Oct 1 13:32:05 Hilbert kernel: [ 5.864700] Bluetooth: L2CAP socket layer initialized Oct 1 13:32:05 Hilbert kernel: [ 5.865692] Bluetooth: SCO socket layer initialized Oct 1 13:32:05 Hilbert kernel: [ 5.998827] Bluetooth: Generic Bluetooth USB driver ver 0.6 Oct 1 13:32:05 Hilbert kernel: [ 5.999211] usbcore: registered new interface driver btusb Oct 1 13:32:05 Hilbert kernel: [ 6.042655] input: Dell WMI hotkeys as /devices/virtual/input/input5 Oct 1 13:32:05 Hilbert kernel: [ 6.272556] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s Oct 1 13:32:05 Hilbert kernel: [ 6.272560] iwl3945: Copyright(c) 2003-2011 Intel Corporation Oct 1 13:32:05 Hilbert kernel: [ 6.272640] iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Oct 1 13:32:05 Hilbert kernel: [ 6.272655] iwl3945 0000:0c:00.0: setting latency timer to 64 Oct 1 13:32:05 Hilbert kernel: [ 6.327907] iwl3945 0000:0c:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels Oct 1 13:32:05 Hilbert kernel: [ 6.327910] iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG Oct 1 13:32:05 Hilbert kernel: [ 6.328058] iwl3945 0000:0c:00.0: irq 45 for MSI/MSI-X Oct 1 13:32:05 Hilbert kernel: [ 6.328285] Registered led device: phy0-led Oct 1 13:32:05 Hilbert kernel: [ 6.328310] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain Oct 1 13:32:05 Hilbert kernel: [ 6.629187] r852 0000:03:01.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 Oct 1 13:32:05 Hilbert kernel: [ 6.629266] r852: driver loaded successfully Oct 1 13:32:05 Hilbert kernel: [ 6.668315] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04793/0x300000/0x0 Oct 1 13:32:05 Hilbert kernel: [ 6.668325] serio: Synaptics pass-through port at isa0060/serio1/input0 Oct 1 13:32:05 Hilbert kernel: [ 6.704510] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 Oct 1 13:32:05 Hilbert kernel: [ 6.812841] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain Oct 1 13:32:05 Hilbert kernel: [ 6.812845] cfg80211: World regulatory domain updated: Oct 1 13:32:05 Hilbert kernel: [ 6.812847] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Oct 1 13:32:05 Hilbert kernel: [ 6.812850] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 1 13:32:05 Hilbert kernel: [ 6.812853] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 1 13:32:05 Hilbert kernel: [ 6.812856] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 1 13:32:05 Hilbert kernel: [ 6.812859] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 1 13:32:05 Hilbert kernel: [ 6.812861] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 1 13:32:05 Hilbert kernel: [ 6.976151] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs' Oct 1 13:32:05 Hilbert kernel: [ 7.040417] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input7 Oct 1 13:32:05 Hilbert kernel: [ 7.040535] generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0 Oct 1 13:32:05 Hilbert kernel: [ 7.044941] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input8 Oct 1 13:32:05 Hilbert kernel: [ 7.045014] generic-usb 0003:0A5C:4502.0002: input,hidraw1: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0 Oct 1 13:32:05 Hilbert kernel: [ 7.049015] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input9 Oct 1 13:32:05 Hilbert kernel: [ 7.049101] generic-usb 0003:0A5C:4503.0003: input,hidraw2: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0 Oct 1 13:32:05 Hilbert kernel: [ 7.049116] usbcore: registered new interface driver usbhid Oct 1 13:32:05 Hilbert kernel: [ 7.049118] usbhid: USB HID core driver Oct 1 13:32:05 Hilbert kernel: [ 7.139428] Linux video capture interface: v2.00 Oct 1 13:32:05 Hilbert kernel: [ 7.359945] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640) Oct 1 13:32:05 Hilbert kernel: [ 7.360345] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. Oct 1 13:32:05 Hilbert kernel: [ 7.361016] input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input10 Oct 1 13:32:05 Hilbert kernel: [ 7.361121] usbcore: registered new interface driver uvcvideo Oct 1 13:32:05 Hilbert kernel: [ 7.361123] USB Video Class driver (v1.1.0) Oct 1 13:32:05 Hilbert kernel: [ 7.437776] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 Oct 1 13:32:05 Hilbert kernel: [ 7.437848] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X Oct 1 13:32:05 Hilbert kernel: [ 7.437883] HDA Intel 0000:00:1b.0: setting latency timer to 64 Oct 1 13:32:05 Hilbert kernel: [ 7.540229] type=1400 audit(1317468721.259:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=590 comm="apparmor_parser" Oct 1 13:32:05 Hilbert kernel: [ 7.540240] type=1400 audit(1317468721.259:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=766 comm="apparmor_parser" Oct 1 13:32:05 Hilbert kernel: [ 7.540480] type=1400 audit(1317468721.259:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=590 comm="apparmor_parser" Oct 1 13:32:05 Hilbert kernel: [ 7.540496] type=1400 audit(1317468721.259:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=766 comm="apparmor_parser" Oct 1 13:32:05 Hilbert kernel: [ 7.540643] type=1400 audit(1317468721.259:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=590 comm="apparmor_parser" Oct 1 13:32:05 Hilbert kernel: [ 7.540666] type=1400 audit(1317468721.259:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=766 comm="apparmor_parser" Oct 1 13:32:05 Hilbert kernel: [ 7.541170] type=1400 audit(1317468721.259:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=589 comm="apparmor_parser" Oct 1 13:32:05 Hilbert kernel: [ 7.541420] type=1400 audit(1317468721.259:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=589 comm="apparmor_parser" Oct 1 13:32:05 Hilbert kernel: [ 7.541588] type=1400 audit(1317468721.259:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=589 comm="apparmor_parser" Oct 1 13:32:05 Hilbert kernel: [ 7.720563] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 Oct 1 13:32:05 Hilbert kernel: [ 7.720667] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 Oct 1 13:32:05 Hilbert kernel: [ 8.067476] nvidia: module license 'NVIDIA' taints kernel. Oct 1 13:32:05 Hilbert kernel: [ 8.067482] Disabling lock debugging due to kernel taint Oct 1 13:32:05 Hilbert kernel: [ 8.822906] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Oct 1 13:32:05 Hilbert kernel: [ 8.822923] nvidia 0000:01:00.0: setting latency timer to 64 Oct 1 13:32:05 Hilbert kernel: [ 8.822929] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem Oct 1 13:32:05 Hilbert kernel: [ 8.823077] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 280.13 Wed Jul 27 16:53:56 PDT 2011 Oct 1 13:32:05 Hilbert kernel: [ 10.260692] init: udev-fallback-graphics main process (891) terminated with status 1 Oct 1 13:32:05 Hilbert kernel: [ 10.684218] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro Oct 1 13:32:05 Hilbert kernel: [ 10.913498] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) Oct 1 13:32:05 Hilbert kernel: [ 12.141673] type=1400 audit(1317468725.859:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=976 comm="apparmor_parser" Oct 1 13:32:06 Hilbert kernel: [ 12.441264] ppdev: user-space parallel port driver Oct 1 13:32:06 Hilbert modem-manager[981]: ModemManager (version 0.5) starting... Oct 1 13:32:06 Hilbert modem-manager[981]: Loaded plugin Gobi Oct 1 13:32:06 Hilbert modem-manager[981]: Loaded plugin MotoC Oct 1 13:32:06 Hilbert modem-manager[981]: Loaded plugin Huawei Oct 1 13:32:06 Hilbert modem-manager[981]: Loaded plugin Linktop Oct 1 13:32:06 Hilbert modem-manager[981]: Loaded plugin Nokia Oct 1 13:32:06 Hilbert modem-manager[981]: Loaded plugin ZTE Oct 1 13:32:06 Hilbert modem-manager[981]: Loaded plugin SimTech Oct 1 13:32:06 Hilbert modem-manager[981]: Loaded plugin Option Oct 1 13:32:06 Hilbert modem-manager[981]: Loaded plugin Longcheer Oct 1 13:32:06 Hilbert modem-manager[981]: Loaded plugin Ericsson MBM Oct 1 13:32:06 Hilbert modem-manager[981]: Loaded plugin Option High-Speed Oct 1 13:32:06 Hilbert modem-manager[981]: Loaded plugin X22X Oct 1 13:32:06 Hilbert NetworkManager[1024]: NetworkManager (version 0.9.1.90) is starting... Oct 1 13:32:06 Hilbert NetworkManager[1024]: Read config file /etc/NetworkManager/NetworkManager.conf Oct 1 13:32:06 Hilbert modem-manager[981]: Loaded plugin Generic Oct 1 13:32:07 Hilbert modem-manager[981]: Loaded plugin Novatel Oct 1 13:32:07 Hilbert modem-manager[981]: Loaded plugin Samsung Oct 1 13:32:07 Hilbert modem-manager[981]: Loaded plugin Sierra Oct 1 13:32:07 Hilbert modem-manager[981]: Loaded plugin AnyData Oct 1 13:32:07 Hilbert modem-manager[981]: Loaded plugin Wavecom Oct 1 13:32:07 Hilbert NetworkManager[1024]: VPN: loaded org.freedesktop.NetworkManager.pptp Oct 1 13:32:07 Hilbert NetworkManager[1024]: SCPlugin-Ifupdown: init! Oct 1 13:32:07 Hilbert NetworkManager[1024]: SCPlugin-Ifupdown: update_system_hostname Oct 1 13:32:07 Hilbert NetworkManager[1024]: SCPluginIfupdown: management mode: unmanaged Oct 1 13:32:07 Hilbert NetworkManager[1024]: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/net/wlan0, iface: wlan0) Oct 1 13:32:07 Hilbert NetworkManager[1024]: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/net/wlan0, iface: wlan0): no ifupdown configuration found. Oct 1 13:32:07 Hilbert NetworkManager[1024]: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1e.0/0000:03:00.0/ssb0:0/net/eth0, iface: eth0) Oct 1 13:32:07 Hilbert NetworkManager[1024]: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1e.0/0000:03:00.0/ssb0:0/net/eth0, iface: eth0): no ifupdown configuration found. Oct 1 13:32:07 Hilbert NetworkManager[1024]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo) Oct 1 13:32:07 Hilbert NetworkManager[1024]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found. Oct 1 13:32:07 Hilbert NetworkManager[1024]: SCPlugin-Ifupdown: end _init. Oct 1 13:32:07 Hilbert NetworkManager[1024]: Loaded plugin ifupdown: (C) 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list. Oct 1 13:32:07 Hilbert NetworkManager[1024]: Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list. Oct 1 13:32:07 Hilbert NetworkManager[1024]: Ifupdown: get unmanaged devices count: 0 Oct 1 13:32:07 Hilbert NetworkManager[1024]: SCPlugin-Ifupdown: (7355184) ... get_connections. Oct 1 13:32:07 Hilbert NetworkManager[1024]: SCPlugin-Ifupdown: (7355184) ... get_connections (managed=false): return empty list. Oct 1 13:32:07 Hilbert NetworkManager[1024]: keyfile: parsing Condivisa ... Oct 1 13:32:07 Hilbert NetworkManager[1024]: keyfile: read connection 'Condivisa' Oct 1 13:32:07 Hilbert NetworkManager[1024]: keyfile: parsing Alice-37768910 ... Oct 1 13:32:07 Hilbert NetworkManager[1024]: keyfile: read connection 'Alice-37768910' Oct 1 13:32:07 Hilbert NetworkManager[1024]: keyfile: parsing Cavo ... Oct 1 13:32:07 Hilbert NetworkManager[1024]: keyfile: read connection 'Cavo' Oct 1 13:32:07 Hilbert NetworkManager[1024]: Ifupdown: get unmanaged devices count: 0 Oct 1 13:32:07 Hilbert NetworkManager[1024]: modem-manager is now available Oct 1 13:32:07 Hilbert NetworkManager[1024]: monitoring kernel firmware directory '/lib/firmware'. Oct 1 13:32:07 Hilbert NetworkManager[1024]: found WiFi radio killswitch rfkill3 (at /sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/ieee80211/phy0/rfkill3) (driver (unknown)) Oct 1 13:32:07 Hilbert NetworkManager[1024]: found WiFi radio killswitch rfkill1 (at /sys/devices/platform/dell-laptop/rfkill/rfkill1) (driver dell-laptop) Oct 1 13:32:07 Hilbert NetworkManager[1024]: WiFi enabled by radio killswitch; enabled by state file Oct 1 13:32:07 Hilbert NetworkManager[1024]: WWAN enabled by radio killswitch; enabled by state file Oct 1 13:32:07 Hilbert NetworkManager[1024]: WiMAX enabled by radio killswitch; enabled by state file Oct 1 13:32:07 Hilbert NetworkManager[1024]: Networking is enabled by state file Oct 1 13:32:07 Hilbert NetworkManager[1024]: (wlan0): driver supports SSID scans (scan_capa 0x01). Oct 1 13:32:07 Hilbert NetworkManager[1024]: (wlan0): new 802.11 WiFi device (driver: 'iwl3945' ifindex: 3) Oct 1 13:32:07 Hilbert NetworkManager[1024]: (wlan0): exported as /org/freedesktop/NetworkManager/Devices/0 Oct 1 13:32:07 Hilbert NetworkManager[1024]: (wlan0): now managed Oct 1 13:32:07 Hilbert NetworkManager[1024]: (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Oct 1 13:32:07 Hilbert NetworkManager[1024]: (wlan0): bringing up device. Oct 1 13:32:07 Hilbert kernel: [ 14.171229] iwl3945 0000:0c:00.0: loaded firmware version 15.32.2.9 Oct 1 13:32:07 Hilbert NetworkManager[1024]: (wlan0): preparing device. Oct 1 13:32:07 Hilbert NetworkManager[1024]: (wlan0): deactivating device (reason 'managed') [2] Oct 1 13:32:07 Hilbert NetworkManager[1024]: (eth0): carrier is OFF Oct 1 13:32:07 Hilbert NetworkManager[1024]: (eth0): new Ethernet device (driver: 'b44' ifindex: 2) Oct 1 13:32:07 Hilbert NetworkManager[1024]: (eth0): exported as /org/freedesktop/NetworkManager/Devices/1 Oct 1 13:32:07 Hilbert kernel: [ 14.252235] ADDRCONF(NETDEV_UP): wlan0: link is not ready Oct 1 13:32:07 Hilbert NetworkManager[1024]: (eth0): now managed Oct 1 13:32:07 Hilbert NetworkManager[1024]: (eth0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Oct 1 13:32:07 Hilbert NetworkManager[1024]: (eth0): bringing up device. Oct 1 13:32:07 Hilbert NetworkManager[1024]: (eth0): preparing device. Oct 1 13:32:07 Hilbert NetworkManager[1024]: (eth0): deactivating device (reason 'managed') [2] Oct 1 13:32:07 Hilbert NetworkManager[1024]: bluez error getting default adapter: The name org.bluez was not provided by any .service files Oct 1 13:32:08 Hilbert kernel: [ 14.285670] ADDRCONF(NETDEV_UP): eth0: link is not ready Oct 1 13:32:08 Hilbert NetworkManager[1024]: wpa_supplicant started Oct 1 13:32:09 Hilbert NetworkManager[1024]: (wlan0): supplicant interface state: starting -> ready Oct 1 13:32:09 Hilbert NetworkManager[1024]: (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42] Oct 1 13:32:09 Hilbert NetworkManager[1024]: (wlan0): supplicant interface state: ready -> inactive Oct 1 13:32:11 Hilbert kernel: [ 17.811121] Bluetooth: RFCOMM TTY layer initialized Oct 1 13:32:11 Hilbert kernel: [ 17.811127] Bluetooth: RFCOMM socket layer initialized Oct 1 13:32:11 Hilbert kernel: [ 17.811129] Bluetooth: RFCOMM ver 1.11 Oct 1 13:32:11 Hilbert NetworkManager[1024]: bluez error getting default adapter: No such adapter Oct 1 13:32:11 Hilbert kernel: [ 17.833733] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Oct 1 13:32:11 Hilbert kernel: [ 17.833736] Bluetooth: BNEP filters: protocol multicast Oct 1 13:32:12 Hilbert kernel: [ 18.500064] CE: hpet increased min_delta_ns to 20113 nsec Oct 1 13:32:12 Hilbert kernel: [ 19.188520] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 Oct 1 13:32:13 Hilbert kernel: [ 19.288727] EXT4-fs (sda2): re-mounted. Opts: commit=0 Oct 1 13:32:21 Hilbert kernel: [ 27.894717] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 Oct 1 13:32:21 Hilbert kernel: [ 27.897521] EXT4-fs (sda2): re-mounted. Opts: commit=0 Oct 1 13:32:56 Hilbert kernel: [ 63.203728] iwl3945 0000:0c:00.0: Card state received: HW:Kill SW:On Oct 1 13:32:56 Hilbert kernel: [ 63.205358] kbd_keycode: 39 callbacks suppressed Oct 1 13:32:56 Hilbert kernel: [ 63.205361] keyboard: can't emulate rawmode for keycode 240 Oct 1 13:32:56 Hilbert kernel: [ 63.205372] keyboard: can't emulate rawmode for keycode 240 Oct 1 13:32:56 Hilbert kernel: [ 63.240090] iwl3945 0000:0c:00.0: Not sending command - RF KILL Oct 1 13:32:56 Hilbert kernel: [ 63.240095] iwl3945 0000:0c:00.0: Error sending REPLY_RXON: enqueue_hcmd failed: -5 Oct 1 13:32:56 Hilbert kernel: [ 63.240099] iwl3945 0000:0c:00.0: Error setting new configuration (-5). Oct 1 13:32:56 Hilbert kernel: [ 63.250059] iwl3945 0000:0c:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0x040003DD Oct 1 13:32:57 Hilbert NetworkManager[1024]: WiFi now disabled by radio killswitch Oct 1 13:32:57 Hilbert NetworkManager[1024]: (wlan0): device state change: disconnected -> unavailable (reason 'none') [30 20 0] Oct 1 13:32:57 Hilbert NetworkManager[1024]: (wlan0): deactivating device (reason 'none') [0] Oct 1 13:32:59 Hilbert kernel: [ 65.790107] usb 3-2: USB disconnect, device number 2 Oct 1 13:32:59 Hilbert kernel: [ 65.790113] usb 3-2.1: USB disconnect, device number 3 Oct 1 13:32:59 Hilbert kernel: [ 65.790485] btusb_intr_complete: hci0 urb ffff8800731150c0 failed to resubmit (19) Oct 1 13:32:59 Hilbert kernel: [ 65.790500] btusb_bulk_complete: hci0 urb ffff880073115240 failed to resubmit (19) Oct 1 13:32:59 Hilbert kernel: [ 65.791487] btusb_bulk_complete: hci0 urb ffff880073115180 failed to resubmit (19) Oct 1 13:32:59 Hilbert kernel: [ 65.791529] btusb_send_frame: hci0 urb ffff88005e193000 submission failed Oct 1 13:32:59 Hilbert kernel: [ 66.042016] usb 3-2.2: USB disconnect, device number 4 Oct 1 13:32:59 Hilbert kernel: [ 66.140223] usb 3-2.3: USB disconnect, device number 5 Oct 1 13:48:59 Hilbert kernel: Kernel logging (proc) stopped. Oct 1 20:55:48 Hilbert kernel: imklog 5.8.1, log source = /proc/kmsg started. Oct 1 20:55:48 Hilbert kernel: [ 0.000000] Initializing cgroup subsys cpuset Oct 1 20:55:48 Hilbert kernel: [ 0.000000] Initializing cgroup subsys cpu Oct 1 20:55:48 Hilbert kernel: [ 0.000000] Linux version 3.0.0-11-generic (buildd@crested) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu2) ) #18-Ubuntu SMP Tue Sep 13 23:38:01 UTC 2011 (Ubuntu 3.0.0-11.18-generic 3.0.4) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-11-generic root=UUID=c49615ed-88be-4cff-812e-d4389247f03d ro quiet splash vt.handoff=7 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] KERNEL supported cpus: Oct 1 20:55:48 Hilbert kernel: [ 0.000000] Intel GenuineIntel Oct 1 20:55:48 Hilbert kernel: [ 0.000000] AMD AuthenticAMD Oct 1 20:55:48 Hilbert kernel: [ 0.000000] Centaur CentaurHauls Oct 1 20:55:48 Hilbert kernel: [ 0.000000] BIOS-provided physical RAM map: Oct 1 20:55:48 Hilbert kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe6d800 (usable) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] BIOS-e820: 000000007fe6d800 - 0000000080000000 (reserved) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] NX (Execute Disable) protection: active Oct 1 20:55:48 Hilbert kernel: [ 0.000000] DMI 2.4 present. Oct 1 20:55:48 Hilbert kernel: [ 0.000000] DMI: Dell Inc. Inspiron 1520 /0KY768, BIOS A04 11/05/2007 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] No AGP bridge found Oct 1 20:55:48 Hilbert kernel: [ 0.000000] last_pfn = 0x7fe6d max_arch_pfn = 0x400000000 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] MTRR default type: uncachable Oct 1 20:55:48 Hilbert kernel: [ 0.000000] MTRR fixed ranges enabled: Oct 1 20:55:48 Hilbert kernel: [ 0.000000] 00000-9FFFF write-back Oct 1 20:55:48 Hilbert kernel: [ 0.000000] A0000-BFFFF uncachable Oct 1 20:55:48 Hilbert kernel: [ 0.000000] C0000-CFFFF write-protect Oct 1 20:55:48 Hilbert kernel: [ 0.000000] D0000-EFFFF uncachable Oct 1 20:55:48 Hilbert kernel: [ 0.000000] F0000-FFFFF write-protect Oct 1 20:55:48 Hilbert kernel: [ 0.000000] MTRR variable ranges enabled: Oct 1 20:55:48 Hilbert kernel: [ 0.000000] 0 base 000000000 mask F80000000 write-back Oct 1 20:55:48 Hilbert kernel: [ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable Oct 1 20:55:48 Hilbert kernel: [ 0.000000] 2 disabled Oct 1 20:55:48 Hilbert kernel: [ 0.000000] 3 disabled Oct 1 20:55:48 Hilbert kernel: [ 0.000000] 4 disabled Oct 1 20:55:48 Hilbert kernel: [ 0.000000] 5 disabled Oct 1 20:55:48 Hilbert kernel: [ 0.000000] 6 disabled Oct 1 20:55:48 Hilbert kernel: [ 0.000000] 7 disabled Oct 1 20:55:48 Hilbert kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] original variable MTRRs Oct 1 20:55:48 Hilbert kernel: [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB Oct 1 20:55:48 Hilbert kernel: [ 0.000000] reg 1, base: 2047MB, range: 1MB, type UC Oct 1 20:55:48 Hilbert kernel: [ 0.000000] total RAM covered: 2047M Oct 1 20:55:48 Hilbert kernel: [ 0.000000] Found optimal setting for mtrr clean up Oct 1 20:55:48 Hilbert kernel: [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 2 lose cover RAM: 0G Oct 1 20:55:48 Hilbert kernel: [ 0.000000] New variable MTRRs Oct 1 20:55:48 Hilbert kernel: [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB Oct 1 20:55:48 Hilbert kernel: [ 0.000000] reg 1, base: 2047MB, range: 1MB, type UC Oct 1 20:55:48 Hilbert kernel: [ 0.000000] initial memory mapped : 0 - 20000000 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] init_memory_mapping: 0000000000000000-000000007fe6d000 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] 0000000000 - 007fe00000 page 2M Oct 1 20:55:48 Hilbert kernel: [ 0.000000] 007fe00000 - 007fe6d000 page 4k Oct 1 20:55:48 Hilbert kernel: [ 0.000000] kernel direct mapping tables up to 7fe6d000 @ 7fe69000-7fe6d000 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] RAMDISK: 365bc000 - 372d6000 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] ACPI: RSDP 00000000000fbbf0 00024 (v02 DELL ) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] ACPI: XSDT 000000007fe6f200 0005C (v01 DELL M08 27D70B05 ASL 00000061) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] ACPI: FACP 000000007fe6f09c 000F4 (v04 DELL M08 27D70B05 ASL 00000061) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] ACPI: DSDT 000000007fe6f800 0565E (v02 INT430 SYSFexxx 00001001 INTL 20050624) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] ACPI: FACS 000000007fe7e000 00040 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] ACPI: HPET 000000007fe6f300 00038 (v01 DELL M08 00000001 ASL 00000061) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] ACPI: APIC 000000007fe6f400 00068 (v01 DELL M08 27D70B05 ASL 00000047) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] ACPI: MCFG 000000007fe6f3c0 0003E (v16 DELL M08 27D70B05 ASL 00000061) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] ACPI: SLIC 000000007fe6f49c 00176 (v01 DELL M08 27D70B05 ASL 00000061) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] ACPI: BOOT 000000007fe6efc0 00028 (v01 DELL M08 27D70B05 ASL 00000061) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] ACPI: SSDT 000000007fe6d9bc 004CC (v01 PmRef CpuPm 00003000 INTL 20050624) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] No NUMA configuration found Oct 1 20:55:48 Hilbert kernel: [ 0.000000] Faking a node at 0000000000000000-000000007fe6d000 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] Initmem setup node 0 0000000000000000-000000007fe6d000 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] NODE_DATA [000000007fe64000 - 000000007fe68fff] Oct 1 20:55:48 Hilbert kernel: [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] Zone PFN ranges: Oct 1 20:55:48 Hilbert kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] Normal empty Oct 1 20:55:48 Hilbert kernel: [ 0.000000] Movable zone start PFN for each node Oct 1 20:55:48 Hilbert kernel: [ 0.000000] early_node_map[2] active PFN ranges Oct 1 20:55:48 Hilbert kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f Oct 1 20:55:48 Hilbert kernel: [ 0.000000] 0: 0x00000100 -> 0x0007fe6d Oct 1 20:55:48 Hilbert kernel: [ 0.000000] On node 0 totalpages: 523772 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] DMA zone: 56 pages used for memmap Oct 1 20:55:48 Hilbert kernel: [ 0.000000] DMA zone: 5 pages reserved Oct 1 20:55:48 Hilbert kernel: [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] DMA32 zone: 7107 pages used for memmap Oct 1 20:55:48 Hilbert kernel: [ 0.000000] DMA32 zone: 512682 pages, LIFO batch:31 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] ACPI: IRQ0 used by override. Oct 1 20:55:48 Hilbert kernel: [ 0.000000] ACPI: IRQ2 used by override. Oct 1 20:55:48 Hilbert kernel: [ 0.000000] ACPI: IRQ9 used by override. Oct 1 20:55:48 Hilbert kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Oct 1 20:55:48 Hilbert kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs Oct 1 20:55:48 Hilbert kernel: [ 0.000000] nr_irqs_gsi: 40 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:74000000) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware Oct 1 20:55:48 Hilbert kernel: [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007fc00000 s79616 r8192 d22784 u1048576 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] pcpu-alloc: s79616 r8192 d22784 u1048576 alloc=1*2097152 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] pcpu-alloc: [0] 0 1 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516604 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] Policy zone: DMA32 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-11-generic root=UUID=c49615ed-88be-4cff-812e-d4389247f03d ro quiet splash vt.handoff=7 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] Checking aperture... Oct 1 20:55:48 Hilbert kernel: [ 0.000000] No AGP bridge found Oct 1 20:55:48 Hilbert kernel: [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area Oct 1 20:55:48 Hilbert kernel: [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! Oct 1 20:55:48 Hilbert kernel: [ 0.000000] Memory: 2039268k/2095540k available (6104k kernel code, 452k absent, 55820k reserved, 4880k data, 984k init) Oct 1 20:55:48 Hilbert kernel: [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] Hierarchical RCU implementation. Oct 1 20:55:48 Hilbert kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. Oct 1 20:55:48 Hilbert kernel: [ 0.000000] NR_IRQS:16640 nr_irqs:512 16 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] Extended CMOS year: 2000 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] vt handoff: transparent VT on vt#7 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] Console: colour VGA+ 80x25 Oct 1 20:55:48 Hilbert kernel: [ 0.000000] console [tty0] enabled Oct 1 20:55:48 Hilbert kernel: [ 0.000000] allocated 16777216 bytes of page_cgroup Oct 1 20:55:48 Hilbert kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups Oct 1 20:55:48 Hilbert kernel: [ 0.000000] hpet clockevent registered Oct 1 20:55:48 Hilbert kernel: [ 0.000000] Fast TSC calibration using PIT Oct 1 20:55:48 Hilbert kernel: [ 0.000000] Detected 2193.854 MHz processor. Oct 1 20:55:48 Hilbert kernel: [ 0.010005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4387.70 BogoMIPS (lpj=21938540) Oct 1 20:55:48 Hilbert kernel: [ 0.010010] pid_max: default: 32768 minimum: 301 Oct 1 20:55:48 Hilbert kernel: [ 0.010043] Security Framework initialized Oct 1 20:55:48 Hilbert kernel: [ 0.010062] AppArmor: AppArmor initialized Oct 1 20:55:48 Hilbert kernel: [ 0.010064] Yama: becoming mindful. Oct 1 20:55:48 Hilbert kernel: [ 0.010308] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Oct 1 20:55:48 Hilbert kernel: [ 0.011472] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Oct 1 20:55:48 Hilbert kernel: [ 0.012023] Mount-cache hash table entries: 256 Oct 1 20:55:48 Hilbert kernel: [ 0.012178] Initializing cgroup subsys cpuacct Oct 1 20:55:48 Hilbert kernel: [ 0.012184] Initializing cgroup subsys memory Oct 1 20:55:48 Hilbert kernel: [ 0.012194] Initializing cgroup subsys devices Oct 1 20:55:48 Hilbert kernel: [ 0.012197] Initializing cgroup subsys freezer Oct 1 20:55:48 Hilbert kernel: [ 0.012199] Initializing cgroup subsys net_cls Oct 1 20:55:48 Hilbert kernel: [ 0.012202] Initializing cgroup subsys blkio Oct 1 20:55:48 Hilbert kernel: [ 0.012210] Initializing cgroup subsys perf_event Oct 1 20:55:48 Hilbert kernel: [ 0.012244] CPU: Physical Processor ID: 0 Oct 1 20:55:48 Hilbert kernel: [ 0.012246] CPU: Processor Core ID: 0 Oct 1 20:55:48 Hilbert kernel: [ 0.012249] mce: CPU supports 6 MCE banks Oct 1 20:55:48 Hilbert kernel: [ 0.012258] CPU0: Thermal monitoring enabled (TM2) Oct 1 20:55:48 Hilbert kernel: [ 0.012264] using mwait in idle threads. Oct 1 20:55:48 Hilbert kernel: [ 0.014792] ACPI: Core revision 20110413 Oct 1 20:55:48 Hilbert kernel: [ 0.023512] ftrace: allocating 25651 entries in 101 pages Oct 1 20:55:48 Hilbert kernel: [ 0.030434] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Oct 1 20:55:48 Hilbert kernel: [ 0.134442] CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b Oct 1 20:55:48 Hilbert kernel: [ 0.140000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. Oct 1 20:55:48 Hilbert kernel: [ 0.140000] PEBS disabled due to CPU errata. Oct 1 20:55:48 Hilbert kernel: [ 0.140000] ... version: 2 Oct 1 20:55:48 Hilbert kernel: [ 0.140000] ... bit width: 40 Oct 1 20:55:48 Hilbert kernel: [ 0.140000] ... generic registers: 2 Oct 1 20:55:48 Hilbert kernel: [ 0.140000] ... value mask: 000000ffffffffff Oct 1 20:55:48 Hilbert kernel: [ 0.140000] ... max period: 000000007fffffff Oct 1 20:55:48 Hilbert kernel: [ 0.140000] ... fixed-purpose events: 3 Oct 1 20:55:48 Hilbert kernel: [ 0.140000] ... event mask: 0000000700000003 Oct 1 20:55:48 Hilbert kernel: [ 0.140000] Booting Node 0, Processors #1 Ok. Oct 1 20:55:48 Hilbert kernel: [ 0.140000] smpboot cpu 1: start_ip = 9a000 Oct 1 20:55:48 Hilbert kernel: [ 0.300018] Brought up 2 CPUs Oct 1 20:55:48 Hilbert kernel: [ 0.300021] Total of 2 processors activated (8775.43 BogoMIPS). Oct 1 20:55:48 Hilbert kernel: [ 0.301275] devtmpfs: initialized Oct 1 20:55:48 Hilbert kernel: [ 0.301426] print_constraints: dummy: Oct 1 20:55:48 Hilbert kernel: [ 0.301461] Time: 18:55:32 Date: 10/01/11 Oct 1 20:55:48 Hilbert kernel: [ 0.301497] NET: Registered protocol family 16 Oct 1 20:55:48 Hilbert kernel: [ 0.301526] Trying to unpack rootfs image as initramfs... Oct 1 20:55:48 Hilbert kernel: [ 0.301627] ACPI: bus type pci registered Oct 1 20:55:48 Hilbert kernel: [ 0.301689] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000) Oct 1 20:55:48 Hilbert kernel: [ 0.301693] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820 Oct 1 20:55:48 Hilbert kernel: [ 0.310085] PCI: Using configuration type 1 for base access Oct 1 20:55:48 Hilbert kernel: [ 0.310092] dmi type 0xB1 record - unknown flag Oct 1 20:55:48 Hilbert kernel: [ 0.310937] bio: create slab at 0 Oct 1 20:55:48 Hilbert kernel: [ 0.312144] ACPI: EC: Look up EC in DSDT Oct 1 20:55:48 Hilbert kernel: [ 0.319562] ACPI: SSDT 000000007fe6e4f2 00286 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) Oct 1 20:55:48 Hilbert kernel: [ 0.319831] ACPI: Dynamic OEM Table Load: Oct 1 20:55:48 Hilbert kernel: [ 0.319834] ACPI: SSDT (null) 00286 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) Oct 1 20:55:48 Hilbert kernel: [ 0.319940] ACPI: SSDT 000000007fe6de88 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) Oct 1 20:55:48 Hilbert kernel: [ 0.320221] ACPI: Dynamic OEM Table Load: Oct 1 20:55:48 Hilbert kernel: [ 0.320224] ACPI: SSDT (null) 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) Oct 1 20:55:48 Hilbert kernel: [ 0.320411] ACPI: SSDT 000000007fe6e778 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) Oct 1 20:55:48 Hilbert kernel: [ 0.320673] ACPI: Dynamic OEM Table Load: Oct 1 20:55:48 Hilbert kernel: [ 0.320676] ACPI: SSDT (null) 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) Oct 1 20:55:48 Hilbert kernel: [ 0.320747] ACPI: SSDT 000000007fe6e46d 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) Oct 1 20:55:48 Hilbert kernel: [ 0.321001] ACPI: Dynamic OEM Table Load: Oct 1 20:55:48 Hilbert kernel: [ 0.321004] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) Oct 1 20:55:48 Hilbert kernel: [ 0.321167] ACPI: Interpreter enabled Oct 1 20:55:48 Hilbert kernel: [ 0.321170] ACPI: (supports S0 S3 S4 S5) Oct 1 20:55:48 Hilbert kernel: [ 0.321186] ACPI: Using IOAPIC for interrupt routing Oct 1 20:55:48 Hilbert kernel: [ 0.352762] ACPI: No dock devices found. Oct 1 20:55:48 Hilbert kernel: [ 0.352765] HEST: Table not found. Oct 1 20:55:48 Hilbert kernel: [ 0.352769] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug Oct 1 20:55:48 Hilbert kernel: [ 0.361663] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) Oct 1 20:55:48 Hilbert kernel: [ 0.378938] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) Oct 1 20:55:48 Hilbert kernel: [ 0.378942] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) Oct 1 20:55:48 Hilbert kernel: [ 0.378945] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) Oct 1 20:55:48 Hilbert kernel: [ 0.378948] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) Oct 1 20:55:48 Hilbert kernel: [ 0.378951] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xf3ffffff] (ignored) Oct 1 20:55:48 Hilbert kernel: [ 0.378953] pci_root PNP0A03:00: host bridge window [mem 0xf8000000-0xfebfffff] (ignored) Oct 1 20:55:48 Hilbert kernel: [ 0.378956] pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff] (ignored) Oct 1 20:55:48 Hilbert kernel: [ 0.378958] pci_root PNP0A03:00: host bridge window [mem 0xfed1c000-0xfed1ffff] (ignored) Oct 1 20:55:48 Hilbert kernel: [ 0.378961] pci_root PNP0A03:00: host bridge window [mem 0xfed90000-0xfed9ffff] (ignored) Oct 1 20:55:48 Hilbert kernel: [ 0.378964] pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff] (ignored) Oct 1 20:55:48 Hilbert kernel: [ 0.378966] pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff] (ignored) Oct 1 20:55:48 Hilbert kernel: [ 0.378969] pci_root PNP0A03:00: host bridge window [mem 0xffb00000-0xffefffff] (ignored) Oct 1 20:55:48 Hilbert kernel: [ 0.378982] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600 Oct 1 20:55:48 Hilbert kernel: [ 0.379029] pci 0000:00:01.0: [8086:2a01] type 1 class 0x000604 Oct 1 20:55:48 Hilbert kernel: [ 0.379065] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold Oct 1 20:55:48 Hilbert kernel: [ 0.379069] pci 0000:00:01.0: PME# disabled Oct 1 20:55:48 Hilbert kernel: [ 0.379124] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03 Oct 1 20:55:48 Hilbert kernel: [ 0.379183] pci 0000:00:1a.0: reg 20: [io 0x6f20-0x6f3f] Oct 1 20:55:48 Hilbert kernel: [ 0.379227] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03 Oct 1 20:55:48 Hilbert kernel: [ 0.379286] pci 0000:00:1a.1: reg 20: [io 0x6f00-0x6f1f] Oct 1 20:55:48 Hilbert kernel: [ 0.379343] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03 Oct 1 20:55:48 Hilbert kernel: [ 0.379369] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff] Oct 1 20:55:48 Hilbert kernel: [ 0.379462] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold Oct 1 20:55:48 Hilbert kernel: [ 0.379468] pci 0000:00:1a.7: PME# disabled Oct 1 20:55:48 Hilbert kernel: [ 0.379499] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403 Oct 1 20:55:48 Hilbert kernel: [ 0.379523] pci 0000:00:1b.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit] Oct 1 20:55:48 Hilbert kernel: [ 0.379610] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold Oct 1 20:55:48 Hilbert kernel: [ 0.379615] pci 0000:00:1b.0: PME# disabled Oct 1 20:55:48 Hilbert kernel: [ 0.379644] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604 Oct 1 20:55:48 Hilbert kernel: [ 0.379734] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Oct 1 20:55:48 Hilbert kernel: [ 0.379739] pci 0000:00:1c.0: PME# disabled Oct 1 20:55:48 Hilbert kernel: [ 0.379776] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604 Oct 1 20:55:48 Hilbert kernel: [ 0.379865] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold Oct 1 20:55:48 Hilbert kernel: [ 0.379870] pci 0000:00:1c.1: PME# disabled Oct 1 20:55:48 Hilbert kernel: [ 0.379905] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604 Oct 1 20:55:48 Hilbert kernel: [ 0.380019] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold Oct 1 20:55:48 Hilbert kernel: [ 0.380024] pci 0000:00:1c.3: PME# disabled Oct 1 20:55:48 Hilbert kernel: [ 0.380059] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03 Oct 1 20:55:48 Hilbert kernel: [ 0.380118] pci 0000:00:1d.0: reg 20: [io 0x6f80-0x6f9f] Oct 1 20:55:48 Hilbert kernel: [ 0.380160] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03 Oct 1 20:55:48 Hilbert kernel: [ 0.380218] pci 0000:00:1d.1: reg 20: [io 0x6f60-0x6f7f] Oct 1 20:55:48 Hilbert kernel: [ 0.380260] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03 Oct 1 20:55:48 Hilbert kernel: [ 0.380320] pci 0000:00:1d.2: reg 20: [io 0x6f40-0x6f5f] Oct 1 20:55:48 Hilbert kernel: [ 0.380375] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03 Oct 1 20:55:48 Hilbert kernel: [ 0.380401] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff] Oct 1 20:55:48 Hilbert kernel: [ 0.380494] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold Oct 1 20:55:48 Hilbert kernel: [ 0.380500] pci 0000:00:1d.7: PME# disabled Oct 1 20:55:48 Hilbert kernel: [ 0.380524] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 Oct 1 20:55:48 Hilbert kernel: [ 0.380615] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601 Oct 1 20:55:48 Hilbert kernel: [ 0.380735] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO Oct 1 20:55:48 Hilbert kernel: [ 0.380741] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO Oct 1 20:55:48 Hilbert kernel: [ 0.380746] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) Oct 1 20:55:48 Hilbert kernel: [ 0.380753] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) Oct 1 20:55:48 Hilbert kernel: [ 0.380800] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101 Oct 1 20:55:48 Hilbert kernel: [ 0.380818] pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7] Oct 1 20:55:48 Hilbert kernel: [ 0.380831] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7] Oct 1 20:55:48 Hilbert kernel: [ 0.380843] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177] Oct 1 20:55:48 Hilbert kernel: [ 0.380856] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377] Oct 1 20:55:48 Hilbert kernel: [ 0.380868] pci 0000:00:1f.1: reg 20: [io 0x6fa0-0x6faf] Oct 1 20:55:48 Hilbert kernel: [ 0.380922] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106 Oct 1 20:55:48 Hilbert kernel: [ 0.380950] pci 0000:00:1f.2: reg 10: [io 0x6eb0-0x6eb7] Oct 1 20:55:48 Hilbert kernel: [ 0.380963] pci 0000:00:1f.2: reg 14: [io 0x6eb8-0x6ebb] Oct 1 20:55:48 Hilbert kernel: [ 0.380975] pci 0000:00:1f.2: reg 18: [io 0x6ec0-0x6ec7] Oct 1 20:55:48 Hilbert kernel: [ 0.380988] pci 0000:00:1f.2: reg 1c: [io 0x6ec8-0x6ecb] Oct 1 20:55:48 Hilbert kernel: [ 0.381000] pci 0000:00:1f.2: reg 20: [io 0x6ee0-0x6eff] Oct 1 20:55:48 Hilbert kernel: [ 0.381014] pci 0000:00:1f.2: reg 24: [mem 0xfebfb800-0xfebfbfff] Oct 1 20:55:48 Hilbert kernel: [ 0.381063] pci 0000:00:1f.2: PME# supported from D3hot Oct 1 20:55:48 Hilbert kernel: [ 0.381068] pci 0000:00:1f.2: PME# disabled Oct 1 20:55:48 Hilbert kernel: [ 0.381091] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05 Oct 1 20:55:48 Hilbert kernel: [ 0.381109] pci 0000:00:1f.3: reg 10: [mem 0xfebfb700-0xfebfb7ff] Oct 1 20:55:48 Hilbert kernel: [ 0.381153] pci 0000:00:1f.3: reg 20: [io 0x10c0-0x10df] Oct 1 20:55:48 Hilbert kernel: [ 0.381242] pci 0000:01:00.0: [10de:0407] type 0 class 0x000300 Oct 1 20:55:48 Hilbert kernel: [ 0.381262] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff] Oct 1 20:55:48 Hilbert kernel: [ 0.381284] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] Oct 1 20:55:48 Hilbert kernel: [ 0.381307] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit] Oct 1 20:55:48 Hilbert kernel: [ 0.381321] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f] Oct 1 20:55:48 Hilbert kernel: [ 0.381336] pci 0000:01:00.0: reg 30: [mem 0xfea00000-0xfea1ffff pref] Oct 1 20:55:48 Hilbert kernel: [ 0.381421] pci 0000:00:01.0: PCI bridge to [bus 01-01] Oct 1 20:55:48 Hilbert kernel: [ 0.381424] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] Oct 1 20:55:48 Hilbert kernel: [ 0.381428] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff] Oct 1 20:55:48 Hilbert kernel: [ 0.381432] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] Oct 1 20:55:48 Hilbert kernel: [ 0.381496] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b] Oct 1 20:55:48 Hilbert kernel: [ 0.381502] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) Oct 1 20:55:48 Hilbert kernel: [ 0.381508] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) Oct 1 20:55:48 Hilbert kernel: [ 0.381516] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Oct 1 20:55:48 Hilbert kernel: [ 0.381680] pci 0000:0c:00.0: [8086:4222] type 0 class 0x000280 Oct 1 20:55:48 Hilbert kernel: [ 0.381736] pci 0000:0c:00.0: reg 10: [mem 0xf9fff000-0xf9ffffff] Oct 1 20:55:48 Hilbert kernel: [ 0.382081] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold Oct 1 20:55:48 Hilbert kernel: [ 0.382094] pci 0000:0c:00.0: PME# disabled Oct 1 20:55:48 Hilbert kernel: [ 0.382165] pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' Oct 1 20:55:48 Hilbert kernel: [ 0.382193] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c] Oct 1 20:55:48 Hilbert kernel: [ 0.382198] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) Oct 1 20:55:48 Hilbert kernel: [ 0.382204] pci 0000:00:1c.1: bridge window [mem 0xf9f00000-0xf9ffffff] Oct 1 20:55:48 Hilbert kernel: [ 0.382212] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Oct 1 20:55:48 Hilbert kernel: [ 0.382277] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e] Oct 1 20:55:48 Hilbert kernel: [ 0.382282] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] Oct 1 20:55:48 Hilbert kernel: [ 0.382287] pci 0000:00:1c.3: bridge window [mem 0xf9c00000-0xf9efffff] Oct 1 20:55:48 Hilbert kernel: [ 0.382295] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] Oct 1 20:55:48 Hilbert kernel: [ 0.382342] pci 0000:03:00.0: [14e4:170c] type 0 class 0x000200 Oct 1 20:55:48 Hilbert kernel: [ 0.382364] pci 0000:03:00.0: reg 10: [mem 0xf9bfe000-0xf9bfffff] Oct 1 20:55:48 Hilbert kernel: [ 0.382451] pci 0000:03:00.0: supports D1 D2 Oct 1 20:55:48 Hilbert kernel: [ 0.382453] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold Oct 1 20:55:48 Hilbert kernel: [ 0.382458] pci 0000:03:00.0: PME# disabled Oct 1 20:55:48 Hilbert kernel: [ 0.382480] pci 0000:03:01.0: [1180:0832] type 0 class 0x000c00 Oct 1 20:55:48 Hilbert kernel: [ 0.382498] pci 0000:03:01.0: proprietary Ricoh MMC controller disabled (via firewire function) Oct 1 20:55:48 Hilbert kernel: [ 0.382500] pci 0000:03:01.0: MMC cards are now supported by standard SDHCI controller Oct 1 20:55:48 Hilbert kernel: [ 0.382517] pci 0000:03:01.0: reg 10: [mem 0xf9bfd800-0xf9bfdfff] Oct 1 20:55:48 Hilbert kernel: [ 0.382607] pci 0000:03:01.0: supports D1 D2 Oct 1 20:55:48 Hilbert kernel: [ 0.382609] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold Oct 1 20:55:48 Hilbert kernel: [ 0.382615] pci 0000:03:01.0: PME# disabled Oct 1 20:55:48 Hilbert kernel: [ 0.382638] pci 0000:03:01.1: [1180:0822] type 0 class 0x000805 Oct 1 20:55:48 Hilbert kernel: [ 0.382661] pci 0000:03:01.1: reg 10: [mem 0xf9bfd400-0xf9bfd4ff] Oct 1 20:55:48 Hilbert kernel: [ 0.382751] pci 0000:03:01.1: supports D1 D2 Oct 1 20:55:48 Hilbert kernel: [ 0.382753] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold Oct 1 20:55:48 Hilbert kernel: [ 0.382758] pci 0000:03:01.1: PME# disabled Oct 1 20:55:48 Hilbert kernel: [ 0.382785] pci 0000:03:01.2: [1180:0592] type 0 class 0x000880 Oct 1 20:55:48 Hilbert kernel: [ 0.382809] pci 0000:03:01.2: reg 10: [mem 0xf9bfd600-0xf9bfd6ff] Oct 1 20:55:48 Hilbert kernel: [ 0.382899] pci 0000:03:01.2: supports D1 D2 Oct 1 20:55:48 Hilbert kernel: [ 0.382901] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold Oct 1 20:55:48 Hilbert kernel: [ 0.382907] pci 0000:03:01.2: PME# disabled Oct 1 20:55:48 Hilbert kernel: [ 0.382929] pci 0000:03:01.3: [1180:0852] type 0 class 0x000880 Oct 1 20:55:48 Hilbert kernel: [ 0.382953] pci 0000:03:01.3: reg 10: [mem 0xf9bfd700-0xf9bfd7ff] Oct 1 20:55:48 Hilbert kernel: [ 0.383045] pci 0000:03:01.3: supports D1 D2 Oct 1 20:55:48 Hilbert kernel: [ 0.383047] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold Oct 1 20:55:48 Hilbert kernel: [ 0.383053] pci 0000:03:01.3: PME# disabled Oct 1 20:55:48 Hilbert kernel: [ 0.383127] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) Oct 1 20:55:48 Hilbert kernel: [ 0.383133] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) Oct 1 20:55:48 Hilbert kernel: [ 0.383139] pci 0000:00:1e.0: bridge window [mem 0xf9b00000-0xf9bfffff] Oct 1 20:55:48 Hilbert kernel: [ 0.383147] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Oct 1 20:55:48 Hilbert kernel: [ 0.383150] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) Oct 1 20:55:48 Hilbert kernel: [ 0.383153] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) Oct 1 20:55:48 Hilbert kernel: [ 0.383188] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Oct 1 20:55:48 Hilbert kernel: [ 0.383382] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] Oct 1 20:55:48 Hilbert kernel: [ 0.383467] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] Oct 1 20:55:48 Hilbert kernel: [ 0.383506] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] Oct 1 20:55:48 Hilbert kernel: [ 0.383546] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] Oct 1 20:55:48 Hilbert kernel: [ 0.383589] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] Oct 1 20:55:48 Hilbert kernel: [ 0.383633] pci0000:00: Requesting ACPI _OSC control (0x1d) Oct 1 20:55:48 Hilbert kernel: [ 0.383636] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d Oct 1 20:55:48 Hilbert kernel: [ 0.383638] ACPI _OSC control for PCIe not granted, disabling ASPM Oct 1 20:55:48 Hilbert kernel: [ 0.391305] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *7 Oct 1 20:55:48 Hilbert kernel: [ 0.391371] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 Oct 1 20:55:48 Hilbert kernel: [ 0.391432] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4 Oct 1 20:55:48 Hilbert kernel: [ 0.391499] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11) Oct 1 20:55:48 Hilbert kernel: [ 0.391561] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Oct 1 20:55:48 Hilbert kernel: [ 0.391625] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Oct 1 20:55:48 Hilbert kernel: [ 0.391688] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) Oct 1 20:55:48 Hilbert kernel: [ 0.391743] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. Oct 1 20:55:48 Hilbert kernel: [ 0.391882] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none Oct 1 20:55:48 Hilbert kernel: [ 0.391888] vgaarb: loaded Oct 1 20:55:48 Hilbert kernel: [ 0.391889] vgaarb: bridge control possible 0000:01:00.0 Oct 1 20:55:48 Hilbert kernel: [ 0.392097] SCSI subsystem initialized Oct 1 20:55:48 Hilbert kernel: [ 0.392171] libata version 3.00 loaded. Oct 1 20:55:48 Hilbert kernel: [ 0.392217] usbcore: registered new interface driver usbfs Oct 1 20:55:48 Hilbert kernel: [ 0.392227] usbcore: registered new interface driver hub Oct 1 20:55:48 Hilbert kernel: [ 0.392256] usbcore: registered new device driver usb Oct 1 20:55:48 Hilbert kernel: [ 0.392348] PCI: Using ACPI for IRQ routing Oct 1 20:55:48 Hilbert kernel: [ 0.394994] PCI: pci_cache_line_size set to 64 bytes Oct 1 20:55:48 Hilbert kernel: [ 0.395122] reserve RAM buffer: 000000000009f000 - 000000000009ffff Oct 1 20:55:48 Hilbert kernel: [ 0.395125] reserve RAM buffer: 000000007fe6d800 - 000000007fffffff Oct 1 20:55:48 Hilbert kernel: [ 0.395226] NetLabel: Initializing Oct 1 20:55:48 Hilbert kernel: [ 0.395228] NetLabel: domain hash size = 128 Oct 1 20:55:48 Hilbert kernel: [ 0.395230] NetLabel: protocols = UNLABELED CIPSOv4 Oct 1 20:55:48 Hilbert kernel: [ 0.395243] NetLabel: unlabeled traffic allowed by default Oct 1 20:55:48 Hilbert kernel: [ 0.395282] HPET: 3 timers in total, 0 timers will be used for per-cpu timer Oct 1 20:55:48 Hilbert kernel: [ 0.395289] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Oct 1 20:55:48 Hilbert kernel: [ 0.395293] hpet0: 3 comparators, 64-bit 14.318180 MHz counter Oct 1 20:55:48 Hilbert kernel: [ 0.400336] Switching to clocksource hpet Oct 1 20:55:48 Hilbert kernel: [ 0.407474] AppArmor: AppArmor Filesystem Enabled Oct 1 20:55:48 Hilbert kernel: [ 0.407509] pnp: PnP ACPI init Oct 1 20:55:48 Hilbert kernel: [ 0.407530] ACPI: bus type pnp registered Oct 1 20:55:48 Hilbert kernel: [ 0.409365] Switched to NOHz mode on CPU #0 Oct 1 20:55:48 Hilbert kernel: [ 0.409461] Switched to NOHz mode on CPU #1 Oct 1 20:55:48 Hilbert kernel: [ 0.416075] pnp 00:00: [bus 00-ff] Oct 1 20:55:48 Hilbert kernel: [ 0.416079] pnp 00:00: [io 0x0000-0x0cf7 window] Oct 1 20:55:48 Hilbert kernel: [ 0.416081] pnp 00:00: [io 0x0cf8-0x0cff] Oct 1 20:55:48 Hilbert kernel: [ 0.416084] pnp 00:00: [io 0x0d00-0xffff window] Oct 1 20:55:48 Hilbert kernel: [ 0.416086] pnp 00:00: [mem 0x000a0000-0x000bffff window] Oct 1 20:55:48 Hilbert kernel: [ 0.416089] pnp 00:00: [mem 0x000d0000-0x000dffff window] Oct 1 20:55:48 Hilbert kernel: [ 0.416091] pnp 00:00: [mem 0x80000000-0xf3ffffff window] Oct 1 20:55:48 Hilbert kernel: [ 0.416093] pnp 00:00: [mem 0xf8000000-0xfebfffff window] Oct 1 20:55:48 Hilbert kernel: [ 0.416096] pnp 00:00: [mem 0xfec10000-0xfecfffff window] Oct 1 20:55:48 Hilbert kernel: [ 0.416098] pnp 00:00: [mem 0xfed1c000-0xfed1ffff window] Oct 1 20:55:48 Hilbert kernel: [ 0.416100] pnp 00:00: [mem 0xfed90000-0xfed9ffff window] Oct 1 20:55:48 Hilbert kernel: [ 0.416102] pnp 00:00: [mem 0xfeda7000-0xfedfffff window] Oct 1 20:55:48 Hilbert kernel: [ 0.416104] pnp 00:00: [mem 0xfee10000-0xff9fffff window] Oct 1 20:55:48 Hilbert kernel: [ 0.416110] pnp 00:00: [mem 0xffb00000-0xffefffff window] Oct 1 20:55:48 Hilbert kernel: [ 0.416199] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) Oct 1 20:55:48 Hilbert kernel: [ 0.416228] pnp 00:01: [irq 12] Oct 1 20:55:48 Hilbert kernel: [ 0.416252] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active) Oct 1 20:55:48 Hilbert kernel: [ 0.416268] pnp 00:02: [io 0x0060] Oct 1 20:55:48 Hilbert kernel: [ 0.416270] pnp 00:02: [io 0x0064] Oct 1 20:55:48 Hilbert kernel: [ 0.416272] pnp 00:02: [io 0x0062] Oct 1 20:55:48 Hilbert kernel: [ 0.416274] pnp 00:02: [io 0x0066] Oct 1 20:55:48 Hilbert kernel: [ 0.416280] pnp 00:02: [irq 1] Oct 1 20:55:48 Hilbert kernel: [ 0.416304] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) Oct 1 20:55:48 Hilbert kernel: [ 0.416319] pnp 00:03: [io 0x0070-0x0071] Oct 1 20:55:48 Hilbert kernel: [ 0.416325] pnp 00:03: [irq 8] Oct 1 20:55:48 Hilbert kernel: [ 0.416327] pnp 00:03: [io 0x0072-0x0077] Oct 1 20:55:48 Hilbert kernel: [ 0.416348] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) Oct 1 20:55:48 Hilbert kernel: [ 0.416364] pnp 00:04: [io 0x0061] Oct 1 20:55:48 Hilbert kernel: [ 0.416366] pnp 00:04: [io 0x0063] Oct 1 20:55:48 Hilbert kernel: [ 0.416368] pnp 00:04: [io 0x0065] Oct 1 20:55:48 Hilbert kernel: [ 0.416370] pnp 00:04: [io 0x0067] Oct 1 20:55:48 Hilbert kernel: [ 0.416391] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) Oct 1 20:55:48 Hilbert kernel: [ 0.416405] pnp 00:05: [io 0x0c80-0x0cff] Oct 1 20:55:48 Hilbert kernel: [ 0.416464] system 00:05: [io 0x0c80-0x0cff] could not be reserved Oct 1 20:55:48 Hilbert kernel: [ 0.416468] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) Oct 1 20:55:48 Hilbert kernel: [ 0.416485] pnp 00:06: [dma 4] Oct 1 20:55:48 Hilbert kernel: [ 0.416487] pnp 00:06: [io 0x0000-0x000f] Oct 1 20:55:48 Hilbert kernel: [ 0.416489] pnp 00:06: [io 0x0080-0x0085] Oct 1 20:55:48 Hilbert kernel: [ 0.416491] pnp 00:06: [io 0x0087-0x008f] Oct 1 20:55:48 Hilbert kernel: [ 0.416493] pnp 00:06: [io 0x00c0-0x00df] Oct 1 20:55:48 Hilbert kernel: [ 0.416495] pnp 00:06: [io 0x0010-0x001f] Oct 1 20:55:48 Hilbert kernel: [ 0.416497] pnp 00:06: [io 0x0090-0x0091] Oct 1 20:55:48 Hilbert kernel: [ 0.416499] pnp 00:06: [io 0x0093-0x009f] Oct 1 20:55:48 Hilbert kernel: [ 0.416522] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active) Oct 1 20:55:48 Hilbert kernel: [ 0.416536] pnp 00:07: [io 0x00f0-0x00ff] Oct 1 20:55:48 Hilbert kernel: [ 0.416542] pnp 00:07: [irq 13] Oct 1 20:55:48 Hilbert kernel: [ 0.416568] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) Oct 1 20:55:48 Hilbert kernel: [ 0.416604] pnp 00:08: [mem 0xfed00000-0xfed003ff] Oct 1 20:55:48 Hilbert kernel: [ 0.416653] system 00:08: [mem 0xfed00000-0xfed003ff] has been reserved Oct 1 20:55:48 Hilbert kernel: [ 0.416657] system 00:08: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) Oct 1 20:55:48 Hilbert kernel: [ 0.416780] pnp 00:09: [io 0x0900-0x097f] Oct 1 20:55:48 Hilbert kernel: [ 0.416782] pnp 00:09: [io 0x0092] Oct 1 20:55:48 Hilbert kernel: [ 0.416784] pnp 00:09: [io 0x00b2-0x00b3] Oct 1 20:55:48 Hilbert kernel: [ 0.416786] pnp 00:09: [io 0x0020-0x0021] Oct 1 20:55:48 Hilbert kernel: [ 0.416788] pnp 00:09: [io 0x00a0-0x00a1] Oct 1 20:55:48 Hilbert kernel: [ 0.416790] pnp 00:09: [irq 0 disabled] Oct 1 20:55:48 Hilbert kernel: [ 0.416792] pnp 00:09: [io 0x04d0-0x04d1] Oct 1 20:55:48 Hilbert kernel: [ 0.416793] pnp 00:09: [io 0x1000-0x1005] Oct 1 20:55:48 Hilbert NetworkManager[954]: NetworkManager (version 0.9.1.90) is starting... Oct 1 20:55:48 Hilbert NetworkManager[954]: Read config file /etc/NetworkManager/NetworkManager.conf Oct 1 20:55:48 Hilbert modem-manager[939]: ModemManager (version 0.5) starting... Oct 1 20:55:48 Hilbert NetworkManager[954]: VPN: loaded org.freedesktop.NetworkManager.pptp Oct 1 20:55:48 Hilbert modem-manager[939]: Loaded plugin Gobi Oct 1 20:55:48 Hilbert modem-manager[939]: Loaded plugin MotoC Oct 1 20:55:48 Hilbert modem-manager[939]: Loaded plugin Huawei Oct 1 20:55:48 Hilbert modem-manager[939]: Loaded plugin Linktop Oct 1 20:55:48 Hilbert modem-manager[939]: Loaded plugin Nokia Oct 1 20:55:48 Hilbert kernel: [ 0.416795] pnp 00:09: [io 0x1008-0x100f] Oct 1 20:55:48 Hilbert kernel: [ 0.416810] pnp 00:09: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] Oct 1 20:55:48 Hilbert kernel: [ 0.416813] pnp 00:09: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] Oct 1 20:55:48 Hilbert kernel: [ 0.416863] system 00:09: [io 0x0900-0x097f] has been reserved Oct 1 20:55:48 Hilbert kernel: [ 0.416866] system 00:09: [io 0x04d0-0x04d1] has been reserved Oct 1 20:55:48 Hilbert kernel: [ 0.416870] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) Oct 1 20:55:48 Hilbert kernel: [ 0.416886] pnp 00:0a: [io 0xf400-0xf4fe] Oct 1 20:55:48 Hilbert kernel: [ 0.416888] pnp 00:0a: [io 0x0086] Oct 1 20:55:48 Hilbert kernel: [ 0.416890] pnp 00:0a: [io 0x1006-0x1007] Oct 1 20:55:48 Hilbert kernel: [ 0.416892] pnp 00:0a: [io 0x100a-0x1059] Oct 1 20:55:48 Hilbert kernel: [ 0.416893] pnp 00:0a: [io 0x1060-0x107f] Oct 1 20:55:48 Hilbert kernel: [ 0.416895] pnp 00:0a: [io 0x1080-0x10bf] Oct 1 20:55:48 Hilbert kernel: [ 0.416897] pnp 00:0a: [io 0x10c0-0x10df] Oct 1 20:55:48 Hilbert kernel: [ 0.416904] pnp 00:0a: [io 0x1010-0x102f] Oct 1 20:55:48 Hilbert kernel: [ 0.416906] pnp 00:0a: [io 0x0809] Oct 1 20:55:48 Hilbert kernel: [ 0.416919] pnp 00:0a: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] Oct 1 20:55:48 Hilbert kernel: [ 0.416923] pnp 00:0a: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] Oct 1 20:55:48 Hilbert kernel: [ 0.416926] pnp 00:0a: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] Oct 1 20:55:48 Hilbert kernel: [ 0.416929] pnp 00:0a: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] Oct 1 20:55:48 Hilbert kernel: [ 0.416983] system 00:0a: [io 0xf400-0xf4fe] has been reserved Oct 1 20:55:48 Hilbert kernel: [ 0.416986] system 00:0a: [io 0x1080-0x10bf] has been reserved Oct 1 20:55:48 Hilbert kernel: [ 0.416989] system 00:0a: [io 0x10c0-0x10df] has been reserved Oct 1 20:55:48 Hilbert kernel: [ 0.416992] system 00:0a: [io 0x0809] has been reserved Oct 1 20:55:48 Hilbert kernel: [ 0.416995] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) Oct 1 20:55:48 Hilbert kernel: [ 0.426590] pnp 00:0b: [mem 0x00000000-0x0009efff] Oct 1 20:55:48 Hilbert kernel: [ 0.426594] pnp 00:0b: [mem 0x0009f000-0x0009ffff] Oct 1 20:55:48 Hilbert kernel: [ 0.426597] pnp 00:0b: [mem 0x000c0000-0x000cffff] Oct 1 20:55:48 Hilbert kernel: [ 0.426599] pnp 00:0b: [mem 0x000e0000-0x000fffff] Oct 1 20:55:48 Hilbert kernel: [ 0.426601] pnp 00:0b: [mem 0x00100000-0x7fe6d7ff] Oct 1 20:55:48 Hilbert kernel: [ 0.426603] pnp 00:0b: [mem 0x7fe6d800-0x7fefffff] Oct 1 20:55:48 Hilbert kernel: [ 0.426605] pnp 00:0b: [mem 0x7ff00000-0x7fffffff] Oct 1 20:55:48 Hilbert kernel: [ 0.426607] pnp 00:0b: [mem 0x7ff00000-0x806fffff] Oct 1 20:55:48 Hilbert kernel: [ 0.426609] pnp 00:0b: [mem 0xfff00000-0xffffffff] Oct 1 20:55:48 Hilbert kernel: [ 0.426611] pnp 00:0b: [mem 0xffa00000-0xffafffff] Oct 1 20:55:48 Hilbert kernel: [ 0.426613] pnp 00:0b: [mem 0xfec00000-0xfec0ffff] Oct 1 20:55:48 Hilbert kernel: [ 0.426615] pnp 00:0b: [mem 0xfee00000-0xfee0ffff] Oct 1 20:55:48 Hilbert kernel: [ 0.426617] pnp 00:0b: [mem 0xfed20000-0xfed8ffff] Oct 1 20:55:48 Hilbert kernel: [ 0.426619] pnp 00:0b: [mem 0xfeda0000-0xfeda3fff] Oct 1 20:55:48 Hilbert kernel: [ 0.426621] pnp 00:0b: [mem 0xfeda4000-0xfeda4fff] Oct 1 20:55:48 Hilbert kernel: [ 0.426623] pnp 00:0b: [mem 0xfeda5000-0xfeda5fff] Oct 1 20:55:48 Hilbert kernel: [ 0.426625] pnp 00:0b: [mem 0xfeda6000-0xfeda6fff] Oct 1 20:55:48 Hilbert kernel: [ 0.426627] pnp 00:0b: [mem 0xfed18000-0xfed1bfff] Oct 1 20:55:48 Hilbert kernel: [ 0.426629] pnp 00:0b: [mem 0xf4000000-0xf7ffffff] Oct 1 20:55:48 Hilbert kernel: [ 0.426732] system 00:0b: [mem 0x00000000-0x0009efff] could not be reserved Oct 1 20:55:48 Hilbert kernel: [ 0.426735] system 00:0b: [mem 0x0009f000-0x0009ffff] could not be reserved Oct 1 20:55:48 Hilbert kernel: [ 0.426738] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved Oct 1 20:55:48 Hilbert kernel: [ 0.426741] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved Oct 1 20:55:48 Hilbert kernel: [ 0.426744] system 00:0b: [mem 0x00100000-0x7fe6d7ff] could not be reserved Oct 1 20:55:48 Hilbert kernel: [ 0.426747] system 00:0b: [mem 0x7fe6d800-0x7fefffff] has been reserved Oct 1 20:55:48 Hilbert kernel: [ 0.426750] system 00:0b: [mem 0x7ff00000-0x7fffffff] has been reserved Oct 1 20:55:48 Hilbert kernel: [ 0.426753] system 00:0b: [mem 0x7ff00000-0x806fffff] could not be reserved Oct 1 20:55:48 Hilbert kernel: [ 0.426756] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved Oct 1 20:55:48 Hilbert kernel: [ 0.426759] system 00:0b: [mem 0xffa00000-0xffafffff] has been reserved Oct 1 20:55:48 Hilbert kernel: [ 0.426762] system 00:0b: [mem 0xfec00000-0xfec0ffff] could not be reserved Oct 1 20:55:48 Hilbert kernel: [ 0.426765] system 00:0b: [mem 0xfee00000-0xfee0ffff] has been reserved Oct 1 20:55:48 Hilbert kernel: [ 0.426767] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved Oct 1 20:55:48 Hilbert kernel: [ 0.426770] system 00:0b: [mem 0xfeda0000-0xfeda3fff] has been reserved Oct 1 20:55:48 Hilbert kernel: [ 0.426773] system 00:0b: [mem 0xfeda4000-0xfeda4fff] has been reserved Oct 1 20:55:48 Hilbert kernel: [ 0.426775] system 00:0b: [mem 0xfeda5000-0xfeda5fff] has been reserved Oct 1 20:55:48 Hilbert kernel: [ 0.426778] system 00:0b: [mem 0xfeda6000-0xfeda6fff] has been reserved Oct 1 20:55:48 Hilbert kernel: [ 0.426781] system 00:0b: [mem 0xfed18000-0xfed1bfff] has been reserved Oct 1 20:55:48 Hilbert kernel: [ 0.426784] system 00:0b: [mem 0xf4000000-0xf7ffffff] has been reserved Oct 1 20:55:48 Hilbert kernel: [ 0.426788] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) Oct 1 20:55:48 Hilbert kernel: [ 0.426841] pnp: PnP ACPI: found 12 devices Oct 1 20:55:48 Hilbert kernel: [ 0.426843] ACPI: ACPI bus type pnp unregistered Oct 1 20:55:48 Hilbert kernel: [ 0.432929] PCI: max bus depth: 1 pci_try_num: 2 Oct 1 20:55:48 Hilbert kernel: [ 0.432991] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref] Oct 1 20:55:48 Hilbert kernel: [ 0.432996] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff] Oct 1 20:55:48 Hilbert kernel: [ 0.433000] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80200000-0x803fffff] Oct 1 20:55:48 Hilbert kernel: [ 0.433003] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref] Oct 1 20:55:48 Hilbert kernel: [ 0.433007] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff] Oct 1 20:55:48 Hilbert kernel: [ 0.433010] pci 0000:00:01.0: PCI bridge to [bus 01-01] Oct 1 20:55:48 Hilbert kernel: [ 0.433013] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] Oct 1 20:55:48 Hilbert kernel: [ 0.433016] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff] Oct 1 20:55:48 Hilbert kernel: [ 0.433020] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] Oct 1 20:55:48 Hilbert kernel: [ 0.433025] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b] Oct 1 20:55:48 Hilbert kernel: [ 0.433028] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] Oct 1 20:55:48 Hilbert kernel: [ 0.433035] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff] Oct 1 20:55:48 Hilbert kernel: [ 0.433041] pci 0000:00:1c.0: bridge window [mem 0x80400000-0x805fffff 64bit pref] Oct 1 20:55:48 Hilbert kernel: [ 0.433050] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c] Oct 1 20:55:48 Hilbert kernel: [ 0.433053] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] Oct 1 20:55:48 Hilbert kernel: [ 0.433060] pci 0000:00:1c.1: bridge window [mem 0xf9f00000-0xf9ffffff] Oct 1 20:55:48 Hilbert kernel: [ 0.433065] pci 0000:00:1c.1: bridge window [mem 0x80000000-0x801fffff 64bit pref] Oct 1 20:55:48 Hilbert kernel: [ 0.433073] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e] Oct 1 20:55:48 Hilbert kernel: [ 0.433077] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] Oct 1 20:55:48 Hilbert kernel: [ 0.433083] pci 0000:00:1c.3: bridge window [mem 0xf9c00000-0xf9efffff] Oct 1 20:55:48 Hilbert kernel: [ 0.433088] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] Oct 1 20:55:48 Hilbert kernel: [ 0.433097] pci 0000:00:1e.0: PCI bridge to [bus 03-03] Oct 1 20:55:48 Hilbert kernel: [ 0.433099] pci 0000:00:1e.0: bridge window [io disabled] Oct 1 20:55:48 Hilbert kernel: [ 0.433106] pci 0000:00:1e.0: bridge window [mem 0xf9b00000-0xf9bfffff] Oct 1 20:55:48 Hilbert kernel: [ 0.433111] pci 0000:00:1e.0: bridge window [mem pref disabled] Oct 1 20:55:48 Hilbert kernel: [ 0.433137] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Oct 1 20:55:48 Hilbert kernel: [ 0.433142] pci 0000:00:01.0: setting latency timer to 64 Oct 1 20:55:48 Hilbert kernel: [ 0.433150] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Oct 1 20:55:48 Hilbert kernel: [ 0.433155] pci 0000:00:1c.0: setting latency timer to 64 Oct 1 20:55:48 Hilbert kernel: [ 0.433166] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Oct 1 20:55:48 Hilbert kernel: [ 0.433171] pci 0000:00:1c.1: setting latency timer to 64 Oct 1 20:55:48 Hilbert kernel: [ 0.433182] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 Oct 1 20:55:48 Hilbert kernel: [ 0.433187] pci 0000:00:1c.3: setting latency timer to 64 Oct 1 20:55:48 Hilbert kernel: [ 0.433196] pci 0000:00:1e.0: setting latency timer to 64 Oct 1 20:55:48 Hilbert kernel: [ 0.433201] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] Oct 1 20:55:48 Hilbert kernel: [ 0.433203] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff] Oct 1 20:55:48 Hilbert kernel: [ 0.433206] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] Oct 1 20:55:48 Hilbert kernel: [ 0.433208] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfeafffff] Oct 1 20:55:48 Hilbert kernel: [ 0.433210] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] Oct 1 20:55:48 Hilbert kernel: [ 0.433213] pci_bus 0000:0b: resource 0 [io 0x3000-0x3fff] Oct 1 20:55:48 Hilbert kernel: [ 0.433215] pci_bus 0000:0b: resource 1 [mem 0x80200000-0x803fffff] Oct 1 20:55:48 Hilbert kernel: [ 0.433218] pci_bus 0000:0b: resource 2 [mem 0x80400000-0x805fffff 64bit pref] Oct 1 20:55:48 Hilbert kernel: [ 0.433220] pci_bus 0000:0c: resource 0 [io 0x2000-0x2fff] Oct 1 20:55:48 Hilbert kernel: [ 0.433222] pci_bus 0000:0c: resource 1 [mem 0xf9f00000-0xf9ffffff] Oct 1 20:55:48 Hilbert kernel: [ 0.433225] pci_bus 0000:0c: resource 2 [mem 0x80000000-0x801fffff 64bit pref] Oct 1 20:55:48 Hilbert kernel: [ 0.433227] pci_bus 0000:0d: resource 0 [io 0xd000-0xdfff] Oct 1 20:55:48 Hilbert kernel: [ 0.433230] pci_bus 0000:0d: resource 1 [mem 0xf9c00000-0xf9efffff] Oct 1 20:55:48 Hilbert kernel: [ 0.433232] pci_bus 0000:0d: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] Oct 1 20:55:48 Hilbert kernel: [ 0.433235] pci_bus 0000:03: resource 1 [mem 0xf9b00000-0xf9bfffff] Oct 1 20:55:48 Hilbert kernel: [ 0.433237] pci_bus 0000:03: resource 4 [io 0x0000-0xffff] Oct 1 20:55:48 Hilbert kernel: [ 0.433239] pci_bus 0000:03: resource 5 [mem 0x00000000-0xfffffffff] Oct 1 20:55:48 Hilbert kernel: [ 0.433282] NET: Registered protocol family 2 Oct 1 20:55:48 Hilbert kernel: [ 0.433396] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) Oct 1 20:55:48 Hilbert kernel: [ 0.434117] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) Oct 1 20:55:48 Hilbert kernel: [ 0.436282] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) Oct 1 20:55:48 Hilbert kernel: [ 0.436860] TCP: Hash tables configured (established 262144 bind 65536) Oct 1 20:55:48 Hilbert kernel: [ 0.436863] TCP reno registered Oct 1 20:55:48 Hilbert kernel: [ 0.436873] UDP hash table entries: 1024 (order: 3, 32768 bytes) Oct 1 20:55:48 Hilbert kernel: [ 0.436908] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) Oct 1 20:55:48 Hilbert kernel: [ 0.437044] NET: Registered protocol family 1 Oct 1 20:55:48 Hilbert kernel: [ 0.437256] pci 0000:01:00.0: Boot video device Oct 1 20:55:48 Hilbert kernel: [ 0.437280] PCI: CLS 64 bytes, default 64 Oct 1 20:55:48 Hilbert kernel: [ 0.437306] Simple Boot Flag at 0x79 set to 0x1 Oct 1 20:55:48 Hilbert kernel: [ 0.437655] audit: initializing netlink socket (disabled) Oct 1 20:55:48 Hilbert kernel: [ 0.437667] type=2000 audit(1317495332.430:1): initialized Oct 1 20:55:48 Hilbert kernel: [ 0.465041] HugeTLB registered 2 MB page size, pre-allocated 0 pages Oct 1 20:55:48 Hilbert kernel: [ 0.477574] VFS: Disk quotas dquot_6.5.2 Oct 1 20:55:48 Hilbert kernel: [ 0.477635] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Oct 1 20:55:48 Hilbert kernel: [ 0.478229] fuse init (API version 7.16) Oct 1 20:55:48 Hilbert kernel: [ 0.478314] msgmni has been set to 3982 Oct 1 20:55:48 Hilbert kernel: [ 0.478642] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Oct 1 20:55:48 Hilbert kernel: [ 0.478673] io scheduler noop registered Oct 1 20:55:48 Hilbert kernel: [ 0.478675] io scheduler deadline registered Oct 1 20:55:48 Hilbert kernel: [ 0.478712] io scheduler cfq registered (default) Oct 1 20:55:48 Hilbert kernel: [ 0.478827] pcieport 0000:00:01.0: setting latency timer to 64 Oct 1 20:55:48 Hilbert kernel: [ 0.478864] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X Oct 1 20:55:48 Hilbert kernel: [ 0.478913] pcieport 0000:00:1c.0: setting latency timer to 64 Oct 1 20:55:48 Hilbert kernel: [ 0.478970] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X Oct 1 20:55:48 Hilbert kernel: [ 0.479048] pcieport 0000:00:1c.1: setting latency timer to 64 Oct 1 20:55:48 Hilbert kernel: [ 0.479105] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X Oct 1 20:55:48 Hilbert kernel: [ 0.479185] pcieport 0000:00:1c.3: setting latency timer to 64 Oct 1 20:55:48 Hilbert kernel: [ 0.479242] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X Oct 1 20:55:48 Hilbert kernel: [ 0.479340] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Oct 1 20:55:48 Hilbert kernel: [ 0.479362] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 Oct 1 20:55:48 Hilbert kernel: [ 0.479405] intel_idle: MWAIT substates: 0x22220 Oct 1 20:55:48 Hilbert kernel: [ 0.479407] intel_idle: does not run on family 6 model 15 Oct 1 20:55:48 Hilbert kernel: [ 0.479480] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared Oct 1 20:55:48 Hilbert kernel: [ 0.479527] ACPI: AC Adapter [AC] (off-line) Oct 1 20:55:48 Hilbert kernel: [ 0.479596] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 Oct 1 20:55:48 Hilbert kernel: [ 0.480039] ACPI: Lid Switch [LID] Oct 1 20:55:48 Hilbert kernel: [ 0.480083] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 Oct 1 20:55:48 Hilbert kernel: [ 0.480087] ACPI: Power Button [PBTN] Oct 1 20:55:48 Hilbert kernel: [ 0.480127] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 Oct 1 20:55:48 Hilbert kernel: [ 0.480131] ACPI: Sleep Button [SBTN] Oct 1 20:55:48 Hilbert kernel: [ 0.480157] ACPI: acpi_idle registered with cpuidle Oct 1 20:55:48 Hilbert kernel: [ 0.480302] Monitor-Mwait will be used to enter C-1 state Oct 1 20:55:48 Hilbert kernel: [ 0.480330] Monitor-Mwait will be used to enter C-2 state Oct 1 20:55:48 Hilbert kernel: [ 0.480355] Monitor-Mwait will be used to enter C-3 state Oct 1 20:55:48 Hilbert kernel: [ 0.480360] Marking TSC unstable due to TSC halts in idle Oct 1 20:55:48 Hilbert kernel: [ 0.505017] thermal LNXTHERM:00: registered as thermal_zone0 Oct 1 20:55:48 Hilbert kernel: [ 0.505021] ACPI: Thermal Zone [THM] (32 C) Oct 1 20:55:48 Hilbert kernel: [ 0.505049] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared Oct 1 20:55:48 Hilbert kernel: [ 0.505098] ERST: Table is not found! Oct 1 20:55:48 Hilbert kernel: [ 0.505177] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled Oct 1 20:55:48 Hilbert kernel: [ 0.524831] ACPI: Battery Slot [BAT0] (battery present) Oct 1 20:55:48 Hilbert kernel: [ 0.644743] Freeing initrd memory: 13416k freed Oct 1 20:55:48 Hilbert kernel: [ 0.691571] Linux agpgart interface v0.103 Oct 1 20:55:48 Hilbert kernel: [ 0.692806] brd: module loaded Oct 1 20:55:48 Hilbert kernel: [ 0.693315] loop: module loaded Oct 1 20:55:48 Hilbert kernel: [ 0.693460] ata_piix 0000:00:1f.1: version 2.13 Oct 1 20:55:48 Hilbert kernel: [ 0.693475] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Oct 1 20:55:48 Hilbert kernel: [ 0.693522] ata_piix 0000:00:1f.1: setting latency timer to 64 Oct 1 20:55:48 Hilbert kernel: [ 0.693842] scsi0 : ata_piix Oct 1 20:55:48 Hilbert kernel: [ 0.693933] scsi1 : ata_piix Oct 1 20:55:48 Hilbert kernel: [ 0.694218] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 Oct 1 20:55:48 Hilbert kernel: [ 0.694221] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 Oct 1 20:55:48 Hilbert kernel: [ 0.694273] ata2: port disabled. ignoring. Oct 1 20:55:48 Hilbert kernel: [ 0.694530] Fixed MDIO Bus: probed Oct 1 20:55:48 Hilbert kernel: [ 0.694554] PPP generic driver version 2.4.2 Oct 1 20:55:48 Hilbert kernel: [ 0.694592] tun: Universal TUN/TAP device driver, 1.6 Oct 1 20:55:48 Hilbert kernel: [ 0.694594] tun: (C) 1999-2004 Max Krasnyansky Oct 1 20:55:48 Hilbert kernel: [ 0.694671] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Oct 1 20:55:48 Hilbert kernel: [ 0.694695] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 Oct 1 20:55:48 Hilbert kernel: [ 0.694709] ehci_hcd 0000:00:1a.7: setting latency timer to 64 Oct 1 20:55:48 Hilbert kernel: [ 0.694713] ehci_hcd 0000:00:1a.7: EHCI Host Controller Oct 1 20:55:48 Hilbert kernel: [ 0.694748] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 Oct 1 20:55:48 Hilbert kernel: [ 0.694783] ehci_hcd 0000:00:1a.7: debug port 1 Oct 1 20:55:48 Hilbert kernel: [ 0.698668] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported Oct 1 20:55:48 Hilbert kernel: [ 0.698685] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 Oct 1 20:55:48 Hilbert kernel: [ 0.720018] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 Oct 1 20:55:48 Hilbert kernel: [ 0.720127] hub 1-0:1.0: USB hub found Oct 1 20:55:48 Hilbert kernel: [ 0.720132] hub 1-0:1.0: 4 ports detected Oct 1 20:55:48 Hilbert kernel: [ 0.720203] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Oct 1 20:55:48 Hilbert kernel: [ 0.720216] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Oct 1 20:55:48 Hilbert kernel: [ 0.720220] ehci_hcd 0000:00:1d.7: EHCI Host Controller Oct 1 20:55:48 Hilbert kernel: [ 0.720258] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 Oct 1 20:55:48 Hilbert kernel: [ 0.720290] ehci_hcd 0000:00:1d.7: debug port 1 Oct 1 20:55:48 Hilbert kernel: [ 0.724181] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported Oct 1 20:55:48 Hilbert kernel: [ 0.724197] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 Oct 1 20:55:48 Hilbert kernel: [ 0.740015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Oct 1 20:55:48 Hilbert kernel: [ 0.740128] hub 2-0:1.0: USB hub found Oct 1 20:55:48 Hilbert kernel: [ 0.740132] hub 2-0:1.0: 6 ports detected Oct 1 20:55:48 Hilbert kernel: [ 0.740211] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Oct 1 20:55:48 Hilbert kernel: [ 0.740223] uhci_hcd: USB Universal Host Controller Interface driver Oct 1 20:55:48 Hilbert kernel: [ 0.740247] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Oct 1 20:55:48 Hilbert kernel: [ 0.740254] uhci_hcd 0000:00:1a.0: setting latency timer to 64 Oct 1 20:55:48 Hilbert kernel: [ 0.740257] uhci_hcd 0000:00:1a.0: UHCI Host Controller Oct 1 20:55:48 Hilbert kernel: [ 0.740286] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 Oct 1 20:55:48 Hilbert kernel: [ 0.740317] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 Oct 1 20:55:48 Hilbert kernel: [ 0.740426] hub 3-0:1.0: USB hub found Oct 1 20:55:48 Hilbert kernel: [ 0.740430] hub 3-0:1.0: 2 ports detected Oct 1 20:55:48 Hilbert kernel: [ 0.740498] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 Oct 1 20:55:48 Hilbert kernel: [ 0.740505] uhci_hcd 0000:00:1a.1: setting latency timer to 64 Oct 1 20:55:48 Hilbert kernel: [ 0.740508] uhci_hcd 0000:00:1a.1: UHCI Host Controller Oct 1 20:55:48 Hilbert kernel: [ 0.740551] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 Oct 1 20:55:48 Hilbert kernel: [ 0.740592] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 Oct 1 20:55:48 Hilbert kernel: [ 0.740702] hub 4-0:1.0: USB hub found Oct 1 20:55:48 Hilbert kernel: [ 0.740706] hub 4-0:1.0: 2 ports detected Oct 1 20:55:48 Hilbert kernel: [ 0.740769] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Oct 1 20:55:48 Hilbert kernel: [ 0.740775] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Oct 1 20:55:48 Hilbert kernel: [ 0.740779] uhci_hcd 0000:00:1d.0: UHCI Host Controller Oct 1 20:55:48 Hilbert kernel: [ 0.740812] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 Oct 1 20:55:48 Hilbert kernel: [ 0.740842] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 Oct 1 20:55:48 Hilbert kernel: [ 0.740955] hub 5-0:1.0: USB hub found Oct 1 20:55:48 Hilbert kernel: [ 0.740959] hub 5-0:1.0: 2 ports detected Oct 1 20:55:48 Hilbert kernel: [ 0.741021] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 Oct 1 20:55:48 Hilbert kernel: [ 0.741028] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Oct 1 20:55:48 Hilbert kernel: [ 0.741031] uhci_hcd 0000:00:1d.1: UHCI Host Controller Oct 1 20:55:48 Hilbert kernel: [ 0.741060] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 Oct 1 20:55:48 Hilbert kernel: [ 0.741091] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 Oct 1 20:55:48 Hilbert kernel: [ 0.741204] hub 6-0:1.0: USB hub found Oct 1 20:55:48 Hilbert kernel: [ 0.741208] hub 6-0:1.0: 2 ports detected Oct 1 20:55:48 Hilbert kernel: [ 0.741269] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 Oct 1 20:55:48 Hilbert kernel: [ 0.741276] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Oct 1 20:55:48 Hilbert kernel: [ 0.741280] uhci_hcd 0000:00:1d.2: UHCI Host Controller Oct 1 20:55:48 Hilbert kernel: [ 0.741316] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 Oct 1 20:55:48 Hilbert kernel: [ 0.741346] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 Oct 1 20:55:48 Hilbert kernel: [ 0.741453] hub 7-0:1.0: USB hub found Oct 1 20:55:48 Hilbert kernel: [ 0.741457] hub 7-0:1.0: 2 ports detected Oct 1 20:55:48 Hilbert kernel: [ 0.741560] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 Oct 1 20:55:48 Hilbert kernel: [ 0.744465] serio: i8042 KBD port at 0x60,0x64 irq 1 Oct 1 20:55:48 Hilbert kernel: [ 0.744472] serio: i8042 AUX port at 0x60,0x64 irq 12 Oct 1 20:55:48 Hilbert kernel: [ 0.744580] mousedev: PS/2 mouse device common for all mice Oct 1 20:55:48 Hilbert kernel: [ 0.744722] rtc_cmos 00:03: RTC can wake from S4 Oct 1 20:55:48 Hilbert kernel: [ 0.744847] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 Oct 1 20:55:48 Hilbert kernel: [ 0.744880] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs Oct 1 20:55:48 Hilbert kernel: [ 0.744983] device-mapper: uevent: version 1.0.3 Oct 1 20:55:48 Hilbert kernel: [ 0.745049] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com Oct 1 20:55:48 Hilbert kernel: [ 0.745112] cpuidle: using governor ladder Oct 1 20:55:48 Hilbert kernel: [ 0.745195] cpuidle: using governor menu Oct 1 20:55:48 Hilbert kernel: [ 0.745197] EFI Variables Facility v0.08 2004-May-17 Oct 1 20:55:48 Hilbert kernel: [ 0.745452] TCP cubic registered Oct 1 20:55:48 Hilbert kernel: [ 0.745574] NET: Registered protocol family 10 Oct 1 20:55:48 Hilbert kernel: [ 0.746030] NET: Registered protocol family 17 Oct 1 20:55:48 Hilbert kernel: [ 0.746047] Registering the dns_resolver key type Oct 1 20:55:48 Hilbert kernel: [ 0.746147] PM: Hibernation image not present or could not be loaded. Oct 1 20:55:48 Hilbert kernel: [ 0.746159] registered taskstats version 1 Oct 1 20:55:48 Hilbert kernel: [ 0.753594] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 Oct 1 20:55:48 Hilbert kernel: [ 0.758792] Magic number: 15:897:947 Oct 1 20:55:48 Hilbert kernel: [ 0.758844] tty tty4: hash matches Oct 1 20:55:48 Hilbert kernel: [ 0.758917] rtc_cmos 00:03: setting system clock to 2011-10-01 18:55:33 UTC (1317495333) Oct 1 20:55:48 Hilbert kernel: [ 0.759767] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found Oct 1 20:55:48 Hilbert kernel: [ 0.759770] EDD information not available. Oct 1 20:55:48 Hilbert kernel: [ 0.880546] ata1.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, D200, max UDMA/33 Oct 1 20:55:48 Hilbert kernel: [ 0.940534] ata1.00: configured for UDMA/33 Oct 1 20:55:48 Hilbert kernel: [ 0.945928] scsi 0:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632H D200 PQ: 0 ANSI: 5 Oct 1 20:55:48 Hilbert kernel: [ 0.953124] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Oct 1 20:55:48 Hilbert kernel: [ 0.953129] cdrom: Uniform CD-ROM driver Revision: 3.20 Oct 1 20:55:48 Hilbert kernel: [ 0.953292] sr 0:0:0:0: Attached scsi CD-ROM sr0 Oct 1 20:55:48 Hilbert kernel: [ 0.953379] sr 0:0:0:0: Attached scsi generic sg0 type 5 Oct 1 20:55:48 Hilbert kernel: [ 0.955104] Freeing unused kernel memory: 984k freed Oct 1 20:55:48 Hilbert kernel: [ 0.955428] Write protecting the kernel read-only data: 10240k Oct 1 20:55:48 Hilbert kernel: [ 0.955699] Freeing unused kernel memory: 20k freed Oct 1 20:55:48 Hilbert kernel: [ 0.960223] Freeing unused kernel memory: 1400k freed Oct 1 20:55:48 Hilbert kernel: [ 1.031899] ahci 0000:00:1f.2: version 3.0 Oct 1 20:55:48 Hilbert kernel: [ 1.031919] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Oct 1 20:55:48 Hilbert kernel: [ 1.031984] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X Oct 1 20:55:48 Hilbert kernel: [ 1.032059] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode Oct 1 20:55:48 Hilbert kernel: [ 1.032063] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems Oct 1 20:55:48 Hilbert kernel: [ 1.032069] ahci 0000:00:1f.2: setting latency timer to 64 Oct 1 20:55:48 Hilbert kernel: [ 1.045100] sdhci: Secure Digital Host Controller Interface driver Oct 1 20:55:48 Hilbert kernel: [ 1.045104] sdhci: Copyright(c) Pierre Ossman Oct 1 20:55:48 Hilbert kernel: [ 1.045373] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22) Oct 1 20:55:48 Hilbert kernel: [ 1.045404] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 Oct 1 20:55:48 Hilbert kernel: [ 1.053688] scsi2 : ahci Oct 1 20:55:48 Hilbert kernel: [ 1.057056] scsi3 : ahci Oct 1 20:55:48 Hilbert kernel: [ 1.059239] scsi4 : ahci Oct 1 20:55:48 Hilbert kernel: [ 1.059407] ata3: SATA max UDMA/133 abar m2048@0xfebfb800 port 0xfebfb900 irq 44 Oct 1 20:55:48 Hilbert kernel: [ 1.059410] ata4: DUMMY Oct 1 20:55:48 Hilbert kernel: [ 1.059413] ata5: SATA max UDMA/133 abar m2048@0xfebfb800 port 0xfebfba00 irq 44 Oct 1 20:55:48 Hilbert kernel: [ 1.066992] mmc0: no vmmc regulator found Oct 1 20:55:48 Hilbert kernel: [ 1.068627] Registered led device: mmc0:: Oct 1 20:55:48 Hilbert kernel: [ 1.069712] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA Oct 1 20:55:48 Hilbert kernel: [ 1.069766] b44 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Oct 1 20:55:48 Hilbert kernel: [ 1.100407] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) Oct 1 20:55:48 Hilbert kernel: [ 1.100415] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) Oct 1 20:55:48 Hilbert kernel: [ 1.100422] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) Oct 1 20:55:48 Hilbert kernel: [ 1.160176] usb 2-6: new high speed USB device number 2 using ehci_hcd Oct 1 20:55:48 Hilbert kernel: [ 1.190166] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 Oct 1 20:55:48 Hilbert kernel: [ 1.190200] b44: b44.c:v2.0 Oct 1 20:55:48 Hilbert kernel: [ 1.230831] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:1d:09:a8:97:4c Oct 1 20:55:48 Hilbert kernel: [ 1.390340] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 1 20:55:48 Hilbert kernel: [ 1.393317] ata3.00: ATA-7: ST9200420AS, 3.ADC, max UDMA/133 Oct 1 20:55:48 Hilbert kernel: [ 1.393320] ata3.00: 390721968 sectors, multi 8: LBA48 NCQ (depth 31/32) Oct 1 20:55:48 Hilbert kernel: [ 1.396289] ata3.00: configured for UDMA/133 Oct 1 20:55:48 Hilbert kernel: [ 1.396464] scsi 2:0:0:0: Direct-Access ATA ST9200420AS 3.AD PQ: 0 ANSI: 5 Oct 1 20:55:48 Hilbert kernel: [ 1.396621] sd 2:0:0:0: Attached scsi generic sg1 type 0 Oct 1 20:55:48 Hilbert kernel: [ 1.396651] sd 2:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB) Oct 1 20:55:48 Hilbert kernel: [ 1.396725] sd 2:0:0:0: [sda] Write Protect is off Oct 1 20:55:48 Hilbert kernel: [ 1.396729] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 Oct 1 20:55:48 Hilbert kernel: [ 1.396800] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 1 20:55:48 Hilbert kernel: [ 1.400323] ata5: SATA link down (SStatus 0 SControl 300) Oct 1 20:55:48 Hilbert kernel: [ 1.429313] sda: sda1 sda2 sda3 < sda5 > Oct 1 20:55:48 Hilbert kernel: [ 1.429812] sd 2:0:0:0: [sda] Attached SCSI disk Oct 1 20:55:48 Hilbert kernel: [ 1.430505] firewire_ohci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 Oct 1 20:55:48 Hilbert kernel: [ 1.510225] firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1 Oct 1 20:55:48 Hilbert kernel: [ 1.610086] usb 3-2: new full speed USB device number 2 using uhci_hcd Oct 1 20:55:48 Hilbert kernel: [ 1.793484] hub 3-2:1.0: USB hub found Oct 1 20:55:48 Hilbert kernel: [ 1.795419] hub 3-2:1.0: 3 ports detected Oct 1 20:55:48 Hilbert kernel: [ 2.010229] firewire_core: created device fw0: GUID 484fc000188ba470, S400 Oct 1 20:55:48 Hilbert kernel: [ 2.018724] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) Oct 1 20:55:48 Hilbert kernel: [ 2.091439] usb 3-2.1: new full speed USB device number 3 using uhci_hcd Oct 1 20:55:48 Hilbert kernel: [ 2.321447] usb 3-2.2: new full speed USB device number 4 using uhci_hcd Oct 1 20:55:48 Hilbert kernel: [ 2.541446] usb 3-2.3: new full speed USB device number 5 using uhci_hcd Oct 1 20:55:48 Hilbert kernel: [ 12.478916] lp: driver loaded but no devices found Oct 1 20:55:48 Hilbert kernel: [ 12.531524] Adding 1950716k swap on /dev/sda5. Priority:-1 extents:1 across:1950716k Oct 1 20:55:48 Hilbert kernel: [ 12.557250] acpi device:31: registered as cooling_device2 Oct 1 20:55:48 Hilbert kernel: [ 12.557735] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2e/LNXVIDEO:00/input/input4 Oct 1 20:55:48 Hilbert kernel: [ 12.557819] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) Oct 1 20:55:48 Hilbert kernel: [ 12.557866] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. Oct 1 20:55:48 Hilbert kernel: [ 12.627333] wmi: Mapper loaded Oct 1 20:55:48 Hilbert kernel: [ 12.691772] cfg80211: Calling CRDA to update world regulatory domain Oct 1 20:55:48 Hilbert kernel: [ 12.712400] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s Oct 1 20:55:48 Hilbert kernel: [ 12.712404] iwl3945: Copyright(c) 2003-2011 Intel Corporation Oct 1 20:55:48 Hilbert kernel: [ 12.712500] iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Oct 1 20:55:48 Hilbert kernel: [ 12.712515] iwl3945 0000:0c:00.0: setting latency timer to 64 Oct 1 20:55:48 Hilbert kernel: [ 12.775017] iwl3945 0000:0c:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels Oct 1 20:55:48 Hilbert kernel: [ 12.775021] iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG Oct 1 20:55:48 Hilbert kernel: [ 12.776257] iwl3945 0000:0c:00.0: irq 45 for MSI/MSI-X Oct 1 20:55:48 Hilbert kernel: [ 12.784620] r852 0000:03:01.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 Oct 1 20:55:48 Hilbert kernel: [ 12.784732] Registered led device: phy0-led Oct 1 20:55:48 Hilbert kernel: [ 12.784817] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain Oct 1 20:55:48 Hilbert kernel: [ 12.788395] r852: driver loaded successfully Oct 1 20:55:48 Hilbert kernel: [ 12.789768] nvidia: module license 'NVIDIA' taints kernel. Oct 1 20:55:48 Hilbert kernel: [ 12.789773] Disabling lock debugging due to kernel taint Oct 1 20:55:48 Hilbert kernel: [ 12.802086] type=1400 audit(1317495345.538:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=657 comm="apparmor_parser" Oct 1 20:55:48 Hilbert kernel: [ 12.802341] type=1400 audit(1317495345.538:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=657 comm="apparmor_parser" Oct 1 20:55:48 Hilbert kernel: [ 12.802510] type=1400 audit(1317495345.538:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=657 comm="apparmor_parser" Oct 1 20:55:48 Hilbert kernel: [ 12.806512] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs' Oct 1 20:55:48 Hilbert kernel: [ 12.871492] Bluetooth: Core ver 2.16 Oct 1 20:55:48 Hilbert kernel: [ 12.871522] NET: Registered protocol family 31 Oct 1 20:55:48 Hilbert kernel: [ 12.871524] Bluetooth: HCI device and connection manager initialized Oct 1 20:55:48 Hilbert kernel: [ 12.871527] Bluetooth: HCI socket layer initialized Oct 1 20:55:48 Hilbert kernel: [ 12.871529] Bluetooth: L2CAP socket layer initialized Oct 1 20:55:48 Hilbert kernel: [ 12.873772] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) Oct 1 20:55:48 Hilbert kernel: [ 12.884480] Bluetooth: SCO socket layer initialized Oct 1 20:55:48 Hilbert kernel: [ 12.885104] Bluetooth: Generic Bluetooth USB driver ver 0.6 Oct 1 20:55:48 Hilbert kernel: [ 13.211628] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro Oct 1 20:55:48 Hilbert kernel: [ 13.304139] input: Dell WMI hotkeys as /devices/virtual/input/input5 Oct 1 20:55:48 Hilbert kernel: [ 13.333868] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 Oct 1 20:55:48 Hilbert kernel: [ 13.333934] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X Oct 1 20:55:48 Hilbert kernel: [ 13.333967] HDA Intel 0000:00:1b.0: setting latency timer to 64 Oct 1 20:55:48 Hilbert kernel: [ 13.395078] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04793/0x300000/0x0 Oct 1 20:55:48 Hilbert kernel: [ 13.395084] serio: Synaptics pass-through port at isa0060/serio1/input0 Oct 1 20:55:48 Hilbert kernel: [ 13.429849] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 Oct 1 20:55:48 Hilbert kernel: [ 13.490681] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 Oct 1 20:55:48 Hilbert kernel: [ 13.490893] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 Oct 1 20:55:48 Hilbert kernel: [ 13.766337] usbcore: registered new interface driver btusb Oct 1 20:55:48 Hilbert kernel: [ 13.778668] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain Oct 1 20:55:48 Hilbert kernel: [ 13.778672] cfg80211: World regulatory domain updated: Oct 1 20:55:48 Hilbert kernel: [ 13.778674] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Oct 1 20:55:48 Hilbert kernel: [ 13.778677] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 1 20:55:48 Hilbert kernel: [ 13.778680] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 1 20:55:48 Hilbert kernel: [ 13.778682] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 1 20:55:48 Hilbert kernel: [ 13.778685] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 1 20:55:48 Hilbert kernel: [ 13.778687] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 1 20:55:48 Hilbert kernel: [ 13.873219] Linux video capture interface: v2.00 Oct 1 20:55:48 Hilbert kernel: [ 13.874553] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640) Oct 1 20:55:48 Hilbert kernel: [ 13.880025] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. Oct 1 20:55:48 Hilbert kernel: [ 13.880880] input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input9 Oct 1 20:55:48 Hilbert kernel: [ 13.881052] usbcore: registered new interface driver uvcvideo Oct 1 20:55:48 Hilbert kernel: [ 13.881054] USB Video Class driver (v1.1.0) Oct 1 20:55:48 Hilbert kernel: [ 13.882715] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input10 Oct 1 20:55:48 Hilbert kernel: [ 13.882900] generic-usb 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0 Oct 1 20:55:48 Hilbert kernel: [ 13.887173] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input11 Oct 1 20:55:48 Hilbert kernel: [ 13.887436] generic-usb 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0 Oct 1 20:55:48 Hilbert kernel: [ 13.887492] usbcore: registered new interface driver usbhid Oct 1 20:55:48 Hilbert kernel: [ 13.887495] usbhid: USB HID core driver Oct 1 20:55:48 Hilbert kernel: [ 14.021607] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Oct 1 20:55:48 Hilbert kernel: [ 14.021618] nvidia 0000:01:00.0: setting latency timer to 64 Oct 1 20:55:48 Hilbert kernel: [ 14.021625] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem Oct 1 20:55:48 Hilbert kernel: [ 14.021748] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 280.13 Wed Jul 27 16:53:56 PDT 2011 Oct 1 20:55:48 Hilbert kernel: [ 14.406251] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) Oct 1 20:55:48 Hilbert kernel: [ 14.530694] init: udev-fallback-graphics main process (891) terminated with status 1 Oct 1 20:55:48 Hilbert kernel: [ 15.352468] type=1400 audit(1317495348.088:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=957 comm="apparmor_parser" Oct 1 20:55:48 Hilbert kernel: [ 15.357730] type=1400 audit(1317495348.088:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=957 comm="apparmor_parser" Oct 1 20:55:48 Hilbert kernel: [ 15.357903] type=1400 audit(1317495348.088:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=957 comm="apparmor_parser" Oct 1 20:55:48 Hilbert kernel: [ 15.365723] type=1400 audit(1317495348.098:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=961 comm="apparmor_parser" Oct 1 20:55:48 Hilbert kernel: [ 15.368779] type=1400 audit(1317495348.098:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=956 comm="apparmor_parser" Oct 1 20:55:48 Hilbert kernel: [ 15.369972] type=1400 audit(1317495348.098:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=961 comm="apparmor_parser" Oct 1 20:55:48 Hilbert kernel: [ 15.371937] type=1400 audit(1317495348.108:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=961 comm="apparmor_parser" Oct 1 20:55:48 Hilbert kernel: [ 15.375413] ppdev: user-space parallel port driver Oct 1 20:55:48 Hilbert modem-manager[939]: Loaded plugin ZTE Oct 1 20:55:48 Hilbert modem-manager[939]: Loaded plugin SimTech Oct 1 20:55:48 Hilbert modem-manager[939]: Loaded plugin Option Oct 1 20:55:48 Hilbert modem-manager[939]: Loaded plugin Longcheer Oct 1 20:55:48 Hilbert modem-manager[939]: Loaded plugin Ericsson MBM Oct 1 20:55:48 Hilbert modem-manager[939]: Loaded plugin Option High-Speed Oct 1 20:55:48 Hilbert modem-manager[939]: Loaded plugin X22X Oct 1 20:55:48 Hilbert modem-manager[939]: Loaded plugin Generic Oct 1 20:55:48 Hilbert modem-manager[939]: Loaded plugin Novatel Oct 1 20:55:48 Hilbert modem-manager[939]: Loaded plugin Samsung Oct 1 20:55:48 Hilbert modem-manager[939]: Loaded plugin Sierra Oct 1 20:55:48 Hilbert modem-manager[939]: Loaded plugin AnyData Oct 1 20:55:48 Hilbert modem-manager[939]: Loaded plugin Wavecom Oct 1 20:55:48 Hilbert NetworkManager[954]: SCPlugin-Ifupdown: init! Oct 1 20:55:48 Hilbert NetworkManager[954]: SCPlugin-Ifupdown: update_system_hostname Oct 1 20:55:48 Hilbert NetworkManager[954]: SCPluginIfupdown: management mode: unmanaged Oct 1 20:55:48 Hilbert NetworkManager[954]: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/net/wlan0, iface: wlan0) Oct 1 20:55:48 Hilbert NetworkManager[954]: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/net/wlan0, iface: wlan0): no ifupdown configuration found. Oct 1 20:55:48 Hilbert NetworkManager[954]: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1e.0/0000:03:00.0/ssb0:0/net/eth0, iface: eth0) Oct 1 20:55:48 Hilbert NetworkManager[954]: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1e.0/0000:03:00.0/ssb0:0/net/eth0, iface: eth0): no ifupdown configuration found. Oct 1 20:55:48 Hilbert NetworkManager[954]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo) Oct 1 20:55:48 Hilbert NetworkManager[954]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found. Oct 1 20:55:48 Hilbert NetworkManager[954]: SCPlugin-Ifupdown: end _init. Oct 1 20:55:48 Hilbert NetworkManager[954]: Loaded plugin ifupdown: (C) 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list. Oct 1 20:55:48 Hilbert NetworkManager[954]: Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list. Oct 1 20:55:48 Hilbert NetworkManager[954]: Ifupdown: get unmanaged devices count: 0 Oct 1 20:55:48 Hilbert NetworkManager[954]: SCPlugin-Ifupdown: (15092528) ... get_connections. Oct 1 20:55:48 Hilbert NetworkManager[954]: SCPlugin-Ifupdown: (15092528) ... get_connections (managed=false): return empty list. Oct 1 20:55:48 Hilbert NetworkManager[954]: keyfile: parsing Condivisa ... Oct 1 20:55:48 Hilbert NetworkManager[954]: keyfile: read connection 'Condivisa' Oct 1 20:55:48 Hilbert NetworkManager[954]: keyfile: parsing Alice-37768910 ... Oct 1 20:55:48 Hilbert NetworkManager[954]: keyfile: read connection 'Alice-37768910' Oct 1 20:55:48 Hilbert NetworkManager[954]: keyfile: parsing Cavo ... Oct 1 20:55:48 Hilbert NetworkManager[954]: keyfile: read connection 'Cavo' Oct 1 20:55:48 Hilbert NetworkManager[954]: Ifupdown: get unmanaged devices count: 0 Oct 1 20:55:48 Hilbert NetworkManager[954]: modem-manager is now available Oct 1 20:55:48 Hilbert NetworkManager[954]: monitoring kernel firmware directory '/lib/firmware'. Oct 1 20:55:48 Hilbert NetworkManager[954]: found WiFi radio killswitch rfkill0 (at /sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/ieee80211/phy0/rfkill0) (driver (unknown)) Oct 1 20:55:48 Hilbert NetworkManager[954]: found WiFi radio killswitch rfkill1 (at /sys/devices/platform/dell-laptop/rfkill/rfkill1) (driver dell-laptop) Oct 1 20:55:48 Hilbert NetworkManager[954]: WiFi enabled by radio killswitch; enabled by state file Oct 1 20:55:48 Hilbert NetworkManager[954]: WWAN enabled by radio killswitch; enabled by state file Oct 1 20:55:48 Hilbert NetworkManager[954]: WiMAX enabled by radio killswitch; enabled by state file Oct 1 20:55:48 Hilbert NetworkManager[954]: Networking is enabled by state file Oct 1 20:55:48 Hilbert NetworkManager[954]: (wlan0): driver supports SSID scans (scan_capa 0x01). Oct 1 20:55:48 Hilbert NetworkManager[954]: (wlan0): new 802.11 WiFi device (driver: 'iwl3945' ifindex: 3) Oct 1 20:55:48 Hilbert NetworkManager[954]: (wlan0): exported as /org/freedesktop/NetworkManager/Devices/0 Oct 1 20:55:48 Hilbert NetworkManager[954]: (wlan0): now managed Oct 1 20:55:48 Hilbert NetworkManager[954]: (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Oct 1 20:55:48 Hilbert NetworkManager[954]: (wlan0): bringing up device. Oct 1 20:55:48 Hilbert kernel: [ 15.663018] iwl3945 0000:0c:00.0: loaded firmware version 15.32.2.9 Oct 1 20:55:48 Hilbert NetworkManager[954]: (wlan0): preparing device. Oct 1 20:55:48 Hilbert NetworkManager[954]: (wlan0): deactivating device (reason 'managed') [2] Oct 1 20:55:48 Hilbert NetworkManager[954]: (eth0): carrier is OFF Oct 1 20:55:48 Hilbert NetworkManager[954]: (eth0): new Ethernet device (driver: 'b44' ifindex: 2) Oct 1 20:55:48 Hilbert NetworkManager[954]: (eth0): exported as /org/freedesktop/NetworkManager/Devices/1 Oct 1 20:55:48 Hilbert NetworkManager[954]: (eth0): now managed Oct 1 20:55:48 Hilbert NetworkManager[954]: (eth0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Oct 1 20:55:48 Hilbert NetworkManager[954]: (eth0): bringing up device. Oct 1 20:55:48 Hilbert NetworkManager[954]: (eth0): preparing device. Oct 1 20:55:48 Hilbert NetworkManager[954]: (eth0): deactivating device (reason 'managed') [2] Oct 1 20:55:48 Hilbert NetworkManager[954]: modem-manager is now available Oct 1 20:55:48 Hilbert NetworkManager[954]: bluez error getting default adapter: The name org.bluez was not provided by any .service files Oct 1 20:55:48 Hilbert kernel: [ 15.733281] ADDRCONF(NETDEV_UP): wlan0: link is not ready Oct 1 20:55:48 Hilbert kernel: [ 15.741628] ADDRCONF(NETDEV_UP): eth0: link is not ready Oct 1 20:55:48 Hilbert NetworkManager[954]: wpa_supplicant started Oct 1 20:55:48 Hilbert NetworkManager[954]: (wlan0): supplicant interface state: starting -> ready Oct 1 20:55:48 Hilbert NetworkManager[954]: (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42] Oct 1 20:55:48 Hilbert NetworkManager[954]: (wlan0): supplicant interface state: ready -> inactive Oct 1 20:55:48 Hilbert kernel: [ 15.902271] Bluetooth: RFCOMM TTY layer initialized Oct 1 20:55:48 Hilbert kernel: [ 15.902276] Bluetooth: RFCOMM socket layer initialized Oct 1 20:55:48 Hilbert kernel: [ 15.902278] Bluetooth: RFCOMM ver 1.11 Oct 1 20:55:48 Hilbert NetworkManager[954]: bluez error getting default adapter: No such adapter Oct 1 20:55:48 Hilbert kernel: [ 15.923822] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Oct 1 20:55:48 Hilbert kernel: [ 15.923825] Bluetooth: BNEP filters: protocol multicast Oct 1 20:55:51 Hilbert kernel: [ 18.398270] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600 Oct 1 20:55:51 Hilbert kernel: [ 18.476592] EXT4-fs (sda2): re-mounted. Opts: commit=600 Oct 1 20:55:51 Hilbert NetworkManager[954]: (eth0): carrier now ON (device state 20) Oct 1 20:55:51 Hilbert NetworkManager[954]: (eth0): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40] Oct 1 20:55:51 Hilbert NetworkManager[954]: Auto-activating connection 'Cavo'. Oct 1 20:55:51 Hilbert NetworkManager[954]: Activation (eth0) starting connection 'Cavo' Oct 1 20:55:51 Hilbert NetworkManager[954]: (eth0): device state change: disconnected -> prepare (reason 'none') [30 40 0] Oct 1 20:55:51 Hilbert NetworkManager[954]: Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled... Oct 1 20:55:51 Hilbert NetworkManager[954]: Activation (eth0) Stage 1 of 5 (Device Prepare) started... Oct 1 20:55:51 Hilbert NetworkManager[954]: Activation (eth0) Stage 2 of 5 (Device Configure) scheduled... Oct 1 20:55:51 Hilbert NetworkManager[954]: Activation (eth0) Stage 1 of 5 (Device Prepare) complete. Oct 1 20:55:51 Hilbert NetworkManager[954]: Activation (eth0) Stage 2 of 5 (Device Configure) starting... Oct 1 20:55:51 Hilbert NetworkManager[954]: (eth0): device state change: prepare -> config (reason 'none') [40 50 0] Oct 1 20:55:51 Hilbert NetworkManager[954]: Activation (eth0) Stage 2 of 5 (Device Configure) successful. Oct 1 20:55:51 Hilbert NetworkManager[954]: Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled. Oct 1 20:55:51 Hilbert NetworkManager[954]: Activation (eth0) Stage 2 of 5 (Device Configure) complete. Oct 1 20:55:51 Hilbert NetworkManager[954]: Activation (eth0) Stage 3 of 5 (IP Configure Start) started... Oct 1 20:55:51 Hilbert NetworkManager[954]: (eth0): device state change: config -> ip-config (reason 'none') [50 70 0] Oct 1 20:55:51 Hilbert NetworkManager[954]: Activation (eth0) Beginning DHCPv4 transaction (timeout in 45 seconds) Oct 1 20:55:51 Hilbert kernel: [ 19.010208] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex Oct 1 20:55:51 Hilbert kernel: [ 19.010212] b44 ssb0:0: eth0: Flow control is off for TX and off for RX Oct 1 20:55:51 Hilbert kernel: [ 19.010592] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 1 20:55:51 Hilbert NetworkManager[954]: dhclient started with pid 1419 Oct 1 20:55:51 Hilbert NetworkManager[954]: Activation (eth0) Beginning IP6 addrconf. Oct 1 20:55:51 Hilbert NetworkManager[954]: Activation (eth0) Stage 3 of 5 (IP Configure Start) complete. Oct 1 20:55:51 Hilbert dhclient: Internet Systems Consortium DHCP Client 4.1.1-P1 Oct 1 20:55:51 Hilbert dhclient: Copyright 2004-2010 Internet Systems Consortium. Oct 1 20:55:51 Hilbert dhclient: All rights reserved. Oct 1 20:55:51 Hilbert dhclient: For info, please visit https://www.isc.org/software/dhcp/ Oct 1 20:55:51 Hilbert dhclient: Oct 1 20:55:51 Hilbert NetworkManager[954]: (eth0): DHCPv4 state changed nbi -> preinit Oct 1 20:55:51 Hilbert dhclient: Listening on LPF/eth0/00:1d:09:a8:97:4c Oct 1 20:55:51 Hilbert dhclient: Sending on LPF/eth0/00:1d:09:a8:97:4c Oct 1 20:55:51 Hilbert dhclient: Sending on Socket/fallback Oct 1 20:55:51 Hilbert dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 Oct 1 20:55:53 Hilbert kernel: [ 20.563755] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600 Oct 1 20:55:53 Hilbert kernel: [ 20.566723] EXT4-fs (sda2): re-mounted. Opts: commit=600 Oct 1 20:55:53 Hilbert dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 Oct 1 20:55:58 Hilbert dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 Oct 1 20:56:01 Hilbert dhclient: DHCPOFFER of 192.168.1.105 from 192.168.1.1 Oct 1 20:56:01 Hilbert dhclient: DHCPREQUEST of 192.168.1.105 on eth0 to 255.255.255.255 port 67 Oct 1 20:56:02 Hilbert dhclient: DHCPACK of 192.168.1.105 from 192.168.1.1 Oct 1 20:56:02 Hilbert dhclient: bound to 192.168.1.105 -- renewal in 8189 seconds. Oct 1 20:56:02 Hilbert NetworkManager[954]: (eth0): DHCPv4 state changed preinit -> bound Oct 1 20:56:02 Hilbert NetworkManager[954]: Activation (eth0) Stage 4 of 5 (IP4 Configure Get) scheduled... Oct 1 20:56:02 Hilbert NetworkManager[954]: Activation (eth0) Stage 4 of 5 (IP4 Configure Get) started... Oct 1 20:56:02 Hilbert NetworkManager[954]: address 192.168.1.105 Oct 1 20:56:02 Hilbert NetworkManager[954]: prefix 24 (255.255.255.0) Oct 1 20:56:02 Hilbert NetworkManager[954]: gateway 192.168.1.1 Oct 1 20:56:02 Hilbert NetworkManager[954]: hostname 'Hilbert' Oct 1 20:56:02 Hilbert NetworkManager[954]: nameserver '192.168.1.1' Oct 1 20:56:02 Hilbert NetworkManager[954]: domain name 'homenet.telecomitalia.it' Oct 1 20:56:02 Hilbert NetworkManager[954]: Activation (eth0) Stage 5 of 5 (IP Configure Commit) started... Oct 1 20:56:02 Hilbert kernel: [ 29.350243] eth0: no IPv6 routers present Oct 1 20:56:03 Hilbert NetworkManager[954]: (eth0): device state change: ip-config -> activated (reason 'none') [70 100 0] Oct 1 20:56:03 Hilbert NetworkManager[954]: Policy set 'Cavo' (eth0) as default for IPv4 routing and DNS. Oct 1 20:56:03 Hilbert NetworkManager[954]: Activation (eth0) successful, device activated. Oct 1 20:56:03 Hilbert NetworkManager[954]: Activation (eth0) Stage 5 of 5 (IP Configure Commit) complete. Oct 1 20:56:03 Hilbert NetworkManager[954]: Activation (eth0) Stage 4 of 5 (IP4 Configure Get) complete. Oct 1 20:56:10 Hilbert kernel: [ 37.880067] CE: hpet increased min_delta_ns to 20113 nsec Oct 1 20:56:11 Hilbert NetworkManager[954]: (eth0): IP6 addrconf timed out or failed. Oct 1 20:56:11 Hilbert NetworkManager[954]: Activation (eth0) Stage 4 of 5 (IP6 Configure Timeout) scheduled... Oct 1 20:56:11 Hilbert NetworkManager[954]: Activation (eth0) Stage 4 of 5 (IP6 Configure Timeout) started... Oct 1 20:56:11 Hilbert NetworkManager[954]: Activation (eth0) Stage 5 of 5 (IP Configure Commit) started... Oct 1 20:56:11 Hilbert NetworkManager[954]: Activation (eth0) Stage 5 of 5 (IP Configure Commit) complete. Oct 1 20:56:11 Hilbert NetworkManager[954]: Activation (eth0) Stage 4 of 5 (IP6 Configure Timeout) complete. Oct 1 20:56:43 Hilbert NetworkManager[954]: Auto-activating connection 'Alice-37768910'. Oct 1 20:56:43 Hilbert NetworkManager[954]: Activation (wlan0) starting connection 'Alice-37768910' Oct 1 20:56:43 Hilbert NetworkManager[954]: (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0] Oct 1 20:56:43 Hilbert NetworkManager[954]: Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled... Oct 1 20:56:43 Hilbert NetworkManager[954]: Activation (wlan0) Stage 1 of 5 (Device Prepare) started... Oct 1 20:56:43 Hilbert NetworkManager[954]: Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled... Oct 1 20:56:43 Hilbert NetworkManager[954]: Activation (wlan0) Stage 1 of 5 (Device Prepare) complete. Oct 1 20:56:43 Hilbert NetworkManager[954]: Activation (wlan0) Stage 2 of 5 (Device Configure) starting... Oct 1 20:56:43 Hilbert NetworkManager[954]: (wlan0): device state change: prepare -> config (reason 'none') [40 50 0] Oct 1 20:56:43 Hilbert NetworkManager[954]: Activation (wlan0/wireless): connection 'Alice-37768910' has security, and secrets exist. No new secrets needed. Oct 1 20:56:43 Hilbert NetworkManager[954]: Config: added 'ssid' value 'Alice-37768910' Oct 1 20:56:43 Hilbert NetworkManager[954]: Config: added 'scan_ssid' value '1' Oct 1 20:56:43 Hilbert NetworkManager[954]: Config: added 'key_mgmt' value 'WPA-PSK' Oct 1 20:56:43 Hilbert NetworkManager[954]: Config: added 'psk' value '' Oct 1 20:56:43 Hilbert NetworkManager[954]: Activation (wlan0) Stage 2 of 5 (Device Configure) complete. Oct 1 20:56:43 Hilbert NetworkManager[954]: Config: set interface ap_scan to 1 Oct 1 20:56:43 Hilbert NetworkManager[954]: (wlan0): supplicant interface state: inactive -> scanning Oct 1 20:56:46 Hilbert wpa_supplicant[1145]: Trying to authenticate with 00:23:8e:4b:11:70 (SSID='Alice-37768910' freq=2412 MHz) Oct 1 20:56:46 Hilbert wpa_supplicant[1145]: Trying to associate with 00:23:8e:4b:11:70 (SSID='Alice-37768910' freq=2412 MHz) Oct 1 20:56:46 Hilbert NetworkManager[954]: (wlan0): supplicant interface state: scanning -> associating Oct 1 20:56:46 Hilbert wpa_supplicant[1145]: Associated with 00:23:8e:4b:11:70 Oct 1 20:56:46 Hilbert kernel: [ 74.132368] wlan0: authenticate with 00:23:8e:4b:11:70 (try 1) Oct 1 20:56:46 Hilbert kernel: [ 74.134763] wlan0: authenticated Oct 1 20:56:46 Hilbert kernel: [ 74.135134] wlan0: associate with 00:23:8e:4b:11:70 (try 1) Oct 1 20:56:46 Hilbert kernel: [ 74.137573] wlan0: RX AssocResp from 00:23:8e:4b:11:70 (capab=0x411 status=0 aid=1) Oct 1 20:56:46 Hilbert kernel: [ 74.137579] wlan0: associated Oct 1 20:56:46 Hilbert kernel: [ 74.139205] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Oct 1 20:56:46 Hilbert NetworkManager[954]: (wlan0): supplicant interface state: associating -> associated Oct 1 20:56:46 Hilbert NetworkManager[954]: (wlan0): supplicant interface state: associated -> 4-way handshake Oct 1 20:56:46 Hilbert NetworkManager[954]: (wlan0): supplicant interface state: 4-way handshake -> group handshake Oct 1 20:56:46 Hilbert wpa_supplicant[1145]: WPA: Key negotiation completed with 00:23:8e:4b:11:70 [PTK=TKIP GTK=TKIP] Oct 1 20:56:46 Hilbert wpa_supplicant[1145]: CTRL-EVENT-CONNECTED - Connection to 00:23:8e:4b:11:70 completed (auth) [id=0 id_str=] Oct 1 20:56:46 Hilbert NetworkManager[954]: (wlan0): supplicant interface state: group handshake -> completed Oct 1 20:56:46 Hilbert NetworkManager[954]: Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Alice-37768910'. Oct 1 20:56:46 Hilbert NetworkManager[954]: Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled. Oct 1 20:56:46 Hilbert NetworkManager[954]: Activation (wlan0) Stage 3 of 5 (IP Configure Start) started... Oct 1 20:56:46 Hilbert NetworkManager[954]: (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0] Oct 1 20:56:46 Hilbert NetworkManager[954]: Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds) Oct 1 20:56:46 Hilbert NetworkManager[954]: dhclient started with pid 2085 Oct 1 20:56:46 Hilbert NetworkManager[954]: Activation (wlan0) Beginning IP6 addrconf. Oct 1 20:56:46 Hilbert NetworkManager[954]: Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete. Oct 1 20:56:46 Hilbert dhclient: Internet Systems Consortium DHCP Client 4.1.1-P1 Oct 1 20:56:46 Hilbert dhclient: Copyright 2004-2010 Internet Systems Consortium. Oct 1 20:56:46 Hilbert dhclient: All rights reserved. Oct 1 20:56:46 Hilbert dhclient: For info, please visit https://www.isc.org/software/dhcp/ Oct 1 20:56:46 Hilbert dhclient: Oct 1 20:56:46 Hilbert NetworkManager[954]: (wlan0): DHCPv4 state changed nbi -> preinit Oct 1 20:56:46 Hilbert dhclient: Listening on LPF/wlan0/00:1c:bf:61:5f:35 Oct 1 20:56:46 Hilbert dhclient: Sending on LPF/wlan0/00:1c:bf:61:5f:35 Oct 1 20:56:46 Hilbert dhclient: Sending on Socket/fallback Oct 1 20:56:46 Hilbert dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 3 Oct 1 20:56:48 Hilbert dhclient: DHCPOFFER of 192.168.1.170 from 192.168.1.1 Oct 1 20:56:48 Hilbert dhclient: DHCPREQUEST of 192.168.1.170 on wlan0 to 255.255.255.255 port 67 Oct 1 20:56:48 Hilbert dhclient: DHCPACK of 192.168.1.170 from 192.168.1.1 Oct 1 20:56:48 Hilbert dhclient: bound to 192.168.1.170 -- renewal in 9747 seconds. Oct 1 20:56:48 Hilbert NetworkManager[954]: (wlan0): DHCPv4 state changed preinit -> bound Oct 1 20:56:48 Hilbert NetworkManager[954]: Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled... Oct 1 20:56:48 Hilbert NetworkManager[954]: Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started... Oct 1 20:56:48 Hilbert NetworkManager[954]: address 192.168.1.170 Oct 1 20:56:48 Hilbert NetworkManager[954]: prefix 24 (255.255.255.0) Oct 1 20:56:48 Hilbert NetworkManager[954]: gateway 192.168.1.1 Oct 1 20:56:48 Hilbert NetworkManager[954]: hostname 'Hilbert-002' Oct 1 20:56:48 Hilbert NetworkManager[954]: nameserver '192.168.1.1' Oct 1 20:56:48 Hilbert NetworkManager[954]: domain name 'homenet.telecomitalia.it' Oct 1 20:56:48 Hilbert NetworkManager[954]: Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started... Oct 1 20:56:49 Hilbert NetworkManager[954]: Policy set 'Cavo' (eth0) as default for IPv4 routing and DNS. Oct 1 20:56:49 Hilbert NetworkManager[954]: (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0] Oct 1 20:56:49 Hilbert NetworkManager[954]: Activation (wlan0) successful, device activated. Oct 1 20:56:49 Hilbert NetworkManager[954]: Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete. Oct 1 20:56:49 Hilbert NetworkManager[954]: Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete. Oct 1 20:56:57 Hilbert kernel: [ 84.680042] wlan0: no IPv6 routers present Oct 1 20:57:06 Hilbert NetworkManager[954]: (wlan0): IP6 addrconf timed out or failed. Oct 1 20:57:06 Hilbert NetworkManager[954]: Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) scheduled... Oct 1 20:57:06 Hilbert NetworkManager[954]: Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) started... Oct 1 20:57:06 Hilbert NetworkManager[954]: Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started... Oct 1 20:57:06 Hilbert NetworkManager[954]: Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete. Oct 1 20:57:06 Hilbert NetworkManager[954]: Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) complete. Oct 1 21:02:27 Hilbert kernel: [ 414.525769] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled Oct 1 21:02:27 Hilbert kernel: [ 414.528275] SGI XFS Quota Management subsystem Oct 1 21:02:27 Hilbert kernel: [ 414.541947] JFS: nTxBlock = 8192, nTxLock = 65536 Oct 1 21:02:27 Hilbert kernel: [ 414.581523] NTFS driver 2.1.30 [Flags: R/O MODULE]. Oct 1 21:02:27 Hilbert kernel: [ 414.640369] QNX4 filesystem 0.2.3 registered. Oct 1 21:02:27 Hilbert kernel: [ 414.701117] Btrfs loaded Oct 1 21:06:57 Hilbert NetworkManager[954]: kernel firmware directory '/lib/firmware' changed Oct 1 21:12:49 Hilbert kernel: [ 1036.258883] init: tty4 main process (1031) killed by TERM signal Oct 1 21:12:49 Hilbert kernel: [ 1036.259179] init: tty5 main process (1039) killed by TERM signal Oct 1 21:12:49 Hilbert kernel: [ 1036.259457] init: tty2 main process (1047) killed by TERM signal Oct 1 21:12:49 Hilbert kernel: [ 1036.259743] init: tty3 main process (1048) killed by TERM signal Oct 1 21:12:49 Hilbert kernel: [ 1036.260104] init: tty6 main process (1052) killed by TERM signal Oct 1 21:12:49 Hilbert kernel: [ 1036.260365] init: cron main process (1078) killed by TERM signal Oct 1 21:12:49 Hilbert kernel: [ 1036.260578] init: irqbalance main process (1090) killed by TERM signal Oct 1 21:12:49 Hilbert kernel: [ 1036.260793] init: tty1 main process (1299) killed by TERM signal Oct 1 21:12:49 Hilbert kernel: [ 1036.998700] init: plymouth-upstart-bridge main process (7283) terminated with status 1 Oct 1 21:12:50 Hilbert kernel: Kernel logging (proc) stopped. Oct 1 21:14:14 Hilbert kernel: imklog 5.8.1, log source = /proc/kmsg started. Oct 1 21:14:14 Hilbert kernel: [ 0.000000] Initializing cgroup subsys cpuset Oct 1 21:14:14 Hilbert kernel: [ 0.000000] Initializing cgroup subsys cpu Oct 1 21:14:14 Hilbert kernel: [ 0.000000] Linux version 3.0.0-11-generic (buildd@crested) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu2) ) #18-Ubuntu SMP Tue Sep 13 23:38:01 UTC 2011 (Ubuntu 3.0.0-11.18-generic 3.0.4) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-11-generic root=UUID=c49615ed-88be-4cff-812e-d4389247f03d ro quiet splash vt.handoff=7 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] KERNEL supported cpus: Oct 1 21:14:14 Hilbert kernel: [ 0.000000] Intel GenuineIntel Oct 1 21:14:14 Hilbert kernel: [ 0.000000] AMD AuthenticAMD Oct 1 21:14:14 Hilbert kernel: [ 0.000000] Centaur CentaurHauls Oct 1 21:14:14 Hilbert kernel: [ 0.000000] BIOS-provided physical RAM map: Oct 1 21:14:14 Hilbert kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe6d800 (usable) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] BIOS-e820: 000000007fe6d800 - 0000000080000000 (reserved) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] NX (Execute Disable) protection: active Oct 1 21:14:14 Hilbert kernel: [ 0.000000] DMI 2.4 present. Oct 1 21:14:14 Hilbert kernel: [ 0.000000] DMI: Dell Inc. Inspiron 1520 /0KY768, BIOS A04 11/05/2007 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] No AGP bridge found Oct 1 21:14:14 Hilbert kernel: [ 0.000000] last_pfn = 0x7fe6d max_arch_pfn = 0x400000000 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] MTRR default type: uncachable Oct 1 21:14:14 Hilbert kernel: [ 0.000000] MTRR fixed ranges enabled: Oct 1 21:14:14 Hilbert kernel: [ 0.000000] 00000-9FFFF write-back Oct 1 21:14:14 Hilbert kernel: [ 0.000000] A0000-BFFFF uncachable Oct 1 21:14:14 Hilbert kernel: [ 0.000000] C0000-CFFFF write-protect Oct 1 21:14:14 Hilbert kernel: [ 0.000000] D0000-EFFFF uncachable Oct 1 21:14:14 Hilbert kernel: [ 0.000000] F0000-FFFFF write-protect Oct 1 21:14:14 Hilbert kernel: [ 0.000000] MTRR variable ranges enabled: Oct 1 21:14:14 Hilbert kernel: [ 0.000000] 0 base 000000000 mask F80000000 write-back Oct 1 21:14:14 Hilbert kernel: [ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable Oct 1 21:14:14 Hilbert kernel: [ 0.000000] 2 disabled Oct 1 21:14:14 Hilbert kernel: [ 0.000000] 3 disabled Oct 1 21:14:14 Hilbert kernel: [ 0.000000] 4 disabled Oct 1 21:14:14 Hilbert kernel: [ 0.000000] 5 disabled Oct 1 21:14:14 Hilbert kernel: [ 0.000000] 6 disabled Oct 1 21:14:14 Hilbert kernel: [ 0.000000] 7 disabled Oct 1 21:14:14 Hilbert kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] original variable MTRRs Oct 1 21:14:14 Hilbert kernel: [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB Oct 1 21:14:14 Hilbert kernel: [ 0.000000] reg 1, base: 2047MB, range: 1MB, type UC Oct 1 21:14:14 Hilbert kernel: [ 0.000000] total RAM covered: 2047M Oct 1 21:14:14 Hilbert kernel: [ 0.000000] Found optimal setting for mtrr clean up Oct 1 21:14:14 Hilbert kernel: [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 2 lose cover RAM: 0G Oct 1 21:14:14 Hilbert kernel: [ 0.000000] New variable MTRRs Oct 1 21:14:14 Hilbert kernel: [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB Oct 1 21:14:14 Hilbert kernel: [ 0.000000] reg 1, base: 2047MB, range: 1MB, type UC Oct 1 21:14:14 Hilbert kernel: [ 0.000000] initial memory mapped : 0 - 20000000 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] init_memory_mapping: 0000000000000000-000000007fe6d000 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] 0000000000 - 007fe00000 page 2M Oct 1 21:14:14 Hilbert kernel: [ 0.000000] 007fe00000 - 007fe6d000 page 4k Oct 1 21:14:14 Hilbert kernel: [ 0.000000] kernel direct mapping tables up to 7fe6d000 @ 7fe69000-7fe6d000 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] RAMDISK: 365bc000 - 372d6000 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] ACPI: RSDP 00000000000fbbf0 00024 (v02 DELL ) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] ACPI: XSDT 000000007fe6f200 0005C (v01 DELL M08 27D70B05 ASL 00000061) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] ACPI: FACP 000000007fe6f09c 000F4 (v04 DELL M08 27D70B05 ASL 00000061) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] ACPI: DSDT 000000007fe6f800 0565E (v02 INT430 SYSFexxx 00001001 INTL 20050624) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] ACPI: FACS 000000007fe7e000 00040 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] ACPI: HPET 000000007fe6f300 00038 (v01 DELL M08 00000001 ASL 00000061) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] ACPI: APIC 000000007fe6f400 00068 (v01 DELL M08 27D70B05 ASL 00000047) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] ACPI: MCFG 000000007fe6f3c0 0003E (v16 DELL M08 27D70B05 ASL 00000061) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] ACPI: SLIC 000000007fe6f49c 00176 (v01 DELL M08 27D70B05 ASL 00000061) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] ACPI: BOOT 000000007fe6efc0 00028 (v01 DELL M08 27D70B05 ASL 00000061) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] ACPI: SSDT 000000007fe6d9bc 004CC (v01 PmRef CpuPm 00003000 INTL 20050624) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] No NUMA configuration found Oct 1 21:14:14 Hilbert kernel: [ 0.000000] Faking a node at 0000000000000000-000000007fe6d000 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] Initmem setup node 0 0000000000000000-000000007fe6d000 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] NODE_DATA [000000007fe64000 - 000000007fe68fff] Oct 1 21:14:14 Hilbert kernel: [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] Zone PFN ranges: Oct 1 21:14:14 Hilbert kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] Normal empty Oct 1 21:14:14 Hilbert kernel: [ 0.000000] Movable zone start PFN for each node Oct 1 21:14:14 Hilbert kernel: [ 0.000000] early_node_map[2] active PFN ranges Oct 1 21:14:14 Hilbert kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f Oct 1 21:14:14 Hilbert kernel: [ 0.000000] 0: 0x00000100 -> 0x0007fe6d Oct 1 21:14:14 Hilbert kernel: [ 0.000000] On node 0 totalpages: 523772 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] DMA zone: 56 pages used for memmap Oct 1 21:14:14 Hilbert kernel: [ 0.000000] DMA zone: 5 pages reserved Oct 1 21:14:14 Hilbert kernel: [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] DMA32 zone: 7107 pages used for memmap Oct 1 21:14:14 Hilbert kernel: [ 0.000000] DMA32 zone: 512682 pages, LIFO batch:31 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] ACPI: IRQ0 used by override. Oct 1 21:14:14 Hilbert kernel: [ 0.000000] ACPI: IRQ2 used by override. Oct 1 21:14:14 Hilbert kernel: [ 0.000000] ACPI: IRQ9 used by override. Oct 1 21:14:14 Hilbert kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Oct 1 21:14:14 Hilbert kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs Oct 1 21:14:14 Hilbert kernel: [ 0.000000] nr_irqs_gsi: 40 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:74000000) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware Oct 1 21:14:14 Hilbert kernel: [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007fc00000 s79616 r8192 d22784 u1048576 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] pcpu-alloc: s79616 r8192 d22784 u1048576 alloc=1*2097152 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] pcpu-alloc: [0] 0 1 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516604 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] Policy zone: DMA32 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-11-generic root=UUID=c49615ed-88be-4cff-812e-d4389247f03d ro quiet splash vt.handoff=7 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] Checking aperture... Oct 1 21:14:14 Hilbert kernel: [ 0.000000] No AGP bridge found Oct 1 21:14:14 Hilbert kernel: [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area Oct 1 21:14:14 Hilbert kernel: [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! Oct 1 21:14:14 Hilbert kernel: [ 0.000000] Memory: 2039268k/2095540k available (6104k kernel code, 452k absent, 55820k reserved, 4880k data, 984k init) Oct 1 21:14:14 Hilbert kernel: [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] Hierarchical RCU implementation. Oct 1 21:14:14 Hilbert kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. Oct 1 21:14:14 Hilbert kernel: [ 0.000000] NR_IRQS:16640 nr_irqs:512 16 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] Extended CMOS year: 2000 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] vt handoff: transparent VT on vt#7 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] Console: colour VGA+ 80x25 Oct 1 21:14:14 Hilbert kernel: [ 0.000000] console [tty0] enabled Oct 1 21:14:14 Hilbert kernel: [ 0.000000] allocated 16777216 bytes of page_cgroup Oct 1 21:14:14 Hilbert kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups Oct 1 21:14:14 Hilbert kernel: [ 0.000000] hpet clockevent registered Oct 1 21:14:14 Hilbert kernel: [ 0.000000] Fast TSC calibration using PIT Oct 1 21:14:14 Hilbert kernel: [ 0.000000] Detected 2194.060 MHz processor. Oct 1 21:14:14 Hilbert kernel: [ 0.010005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.12 BogoMIPS (lpj=21940600) Oct 1 21:14:14 Hilbert kernel: [ 0.010010] pid_max: default: 32768 minimum: 301 Oct 1 21:14:14 Hilbert kernel: [ 0.010043] Security Framework initialized Oct 1 21:14:14 Hilbert kernel: [ 0.010063] AppArmor: AppArmor initialized Oct 1 21:14:14 Hilbert kernel: [ 0.010064] Yama: becoming mindful. Oct 1 21:14:14 Hilbert kernel: [ 0.010308] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Oct 1 21:14:14 Hilbert kernel: [ 0.011474] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Oct 1 21:14:14 Hilbert kernel: [ 0.012026] Mount-cache hash table entries: 256 Oct 1 21:14:14 Hilbert kernel: [ 0.012181] Initializing cgroup subsys cpuacct Oct 1 21:14:14 Hilbert kernel: [ 0.012187] Initializing cgroup subsys memory Oct 1 21:14:14 Hilbert kernel: [ 0.012197] Initializing cgroup subsys devices Oct 1 21:14:14 Hilbert kernel: [ 0.012200] Initializing cgroup subsys freezer Oct 1 21:14:14 Hilbert kernel: [ 0.012202] Initializing cgroup subsys net_cls Oct 1 21:14:14 Hilbert kernel: [ 0.012205] Initializing cgroup subsys blkio Oct 1 21:14:14 Hilbert kernel: [ 0.012212] Initializing cgroup subsys perf_event Oct 1 21:14:14 Hilbert kernel: [ 0.012246] CPU: Physical Processor ID: 0 Oct 1 21:14:14 Hilbert kernel: [ 0.012248] CPU: Processor Core ID: 0 Oct 1 21:14:14 Hilbert kernel: [ 0.012251] mce: CPU supports 6 MCE banks Oct 1 21:14:14 Hilbert kernel: [ 0.012261] CPU0: Thermal monitoring enabled (TM2) Oct 1 21:14:14 Hilbert kernel: [ 0.012266] using mwait in idle threads. Oct 1 21:14:14 Hilbert kernel: [ 0.014797] ACPI: Core revision 20110413 Oct 1 21:14:14 Hilbert kernel: [ 0.023016] ftrace: allocating 25651 entries in 101 pages Oct 1 21:14:14 Hilbert kernel: [ 0.030433] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Oct 1 21:14:14 Hilbert kernel: [ 0.133954] CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b Oct 1 21:14:14 Hilbert kernel: [ 0.140000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. Oct 1 21:14:14 Hilbert kernel: [ 0.140000] PEBS disabled due to CPU errata. Oct 1 21:14:14 Hilbert kernel: [ 0.140000] ... version: 2 Oct 1 21:14:14 Hilbert kernel: [ 0.140000] ... bit width: 40 Oct 1 21:14:14 Hilbert kernel: [ 0.140000] ... generic registers: 2 Oct 1 21:14:14 Hilbert kernel: [ 0.140000] ... value mask: 000000ffffffffff Oct 1 21:14:14 Hilbert kernel: [ 0.140000] ... max period: 000000007fffffff Oct 1 21:14:14 Hilbert kernel: [ 0.140000] ... fixed-purpose events: 3 Oct 1 21:14:14 Hilbert kernel: [ 0.140000] ... event mask: 0000000700000003 Oct 1 21:14:14 Hilbert kernel: [ 0.140000] Booting Node 0, Processors #1 Ok. Oct 1 21:14:14 Hilbert kernel: [ 0.140000] smpboot cpu 1: start_ip = 9a000 Oct 1 21:14:14 Hilbert kernel: [ 0.300018] Brought up 2 CPUs Oct 1 21:14:14 Hilbert kernel: [ 0.300022] Total of 2 processors activated (8775.90 BogoMIPS). Oct 1 21:14:14 Hilbert kernel: [ 0.301276] devtmpfs: initialized Oct 1 21:14:14 Hilbert kernel: [ 0.301427] print_constraints: dummy: Oct 1 21:14:14 Hilbert kernel: [ 0.301461] Time: 19:14:04 Date: 10/01/11 Oct 1 21:14:14 Hilbert kernel: [ 0.301497] NET: Registered protocol family 16 Oct 1 21:14:14 Hilbert kernel: [ 0.301526] Trying to unpack rootfs image as initramfs... Oct 1 21:14:14 Hilbert kernel: [ 0.301628] ACPI: bus type pci registered Oct 1 21:14:14 Hilbert kernel: [ 0.301690] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000) Oct 1 21:14:14 Hilbert kernel: [ 0.301693] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820 Oct 1 21:14:14 Hilbert kernel: [ 0.310084] PCI: Using configuration type 1 for base access Oct 1 21:14:14 Hilbert kernel: [ 0.310091] dmi type 0xB1 record - unknown flag Oct 1 21:14:14 Hilbert kernel: [ 0.310936] bio: create slab at 0 Oct 1 21:14:14 Hilbert kernel: [ 0.312143] ACPI: EC: Look up EC in DSDT Oct 1 21:14:14 Hilbert kernel: [ 0.322451] ACPI: SSDT 000000007fe6e4f2 00286 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) Oct 1 21:14:14 Hilbert kernel: [ 0.322722] ACPI: Dynamic OEM Table Load: Oct 1 21:14:14 Hilbert kernel: [ 0.322725] ACPI: SSDT (null) 00286 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) Oct 1 21:14:14 Hilbert kernel: [ 0.322831] ACPI: SSDT 000000007fe6de88 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) Oct 1 21:14:14 Hilbert kernel: [ 0.323084] ACPI: Dynamic OEM Table Load: Oct 1 21:14:14 Hilbert kernel: [ 0.323087] ACPI: SSDT (null) 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) Oct 1 21:14:14 Hilbert kernel: [ 0.323268] ACPI: SSDT 000000007fe6e778 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) Oct 1 21:14:14 Hilbert kernel: [ 0.323528] ACPI: Dynamic OEM Table Load: Oct 1 21:14:14 Hilbert kernel: [ 0.323532] ACPI: SSDT (null) 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) Oct 1 21:14:14 Hilbert kernel: [ 0.323602] ACPI: SSDT 000000007fe6e46d 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) Oct 1 21:14:14 Hilbert kernel: [ 0.323856] ACPI: Dynamic OEM Table Load: Oct 1 21:14:14 Hilbert kernel: [ 0.323859] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) Oct 1 21:14:14 Hilbert kernel: [ 0.324023] ACPI: Interpreter enabled Oct 1 21:14:14 Hilbert kernel: [ 0.324026] ACPI: (supports S0 S3 S4 S5) Oct 1 21:14:14 Hilbert kernel: [ 0.324043] ACPI: Using IOAPIC for interrupt routing Oct 1 21:14:14 Hilbert kernel: [ 0.354034] ACPI: No dock devices found. Oct 1 21:14:14 Hilbert kernel: [ 0.354038] HEST: Table not found. Oct 1 21:14:14 Hilbert kernel: [ 0.354042] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug Oct 1 21:14:14 Hilbert kernel: [ 0.362925] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) Oct 1 21:14:14 Hilbert kernel: [ 0.380219] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) Oct 1 21:14:14 Hilbert kernel: [ 0.380223] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) Oct 1 21:14:14 Hilbert kernel: [ 0.380226] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) Oct 1 21:14:14 Hilbert kernel: [ 0.380229] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) Oct 1 21:14:14 Hilbert kernel: [ 0.380232] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xf3ffffff] (ignored) Oct 1 21:14:14 Hilbert kernel: [ 0.380234] pci_root PNP0A03:00: host bridge window [mem 0xf8000000-0xfebfffff] (ignored) Oct 1 21:14:14 Hilbert kernel: [ 0.380237] pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff] (ignored) Oct 1 21:14:14 Hilbert kernel: [ 0.380239] pci_root PNP0A03:00: host bridge window [mem 0xfed1c000-0xfed1ffff] (ignored) Oct 1 21:14:14 Hilbert kernel: [ 0.380242] pci_root PNP0A03:00: host bridge window [mem 0xfed90000-0xfed9ffff] (ignored) Oct 1 21:14:14 Hilbert kernel: [ 0.380245] pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff] (ignored) Oct 1 21:14:14 Hilbert kernel: [ 0.380247] pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff] (ignored) Oct 1 21:14:14 Hilbert kernel: [ 0.380250] pci_root PNP0A03:00: host bridge window [mem 0xffb00000-0xffefffff] (ignored) Oct 1 21:14:14 Hilbert kernel: [ 0.380264] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600 Oct 1 21:14:14 Hilbert kernel: [ 0.380314] pci 0000:00:01.0: [8086:2a01] type 1 class 0x000604 Oct 1 21:14:14 Hilbert kernel: [ 0.380350] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold Oct 1 21:14:14 Hilbert kernel: [ 0.380354] pci 0000:00:01.0: PME# disabled Oct 1 21:14:14 Hilbert kernel: [ 0.380409] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03 Oct 1 21:14:14 Hilbert kernel: [ 0.380470] pci 0000:00:1a.0: reg 20: [io 0x6f20-0x6f3f] Oct 1 21:14:14 Hilbert kernel: [ 0.380512] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03 Oct 1 21:14:14 Hilbert kernel: [ 0.380570] pci 0000:00:1a.1: reg 20: [io 0x6f00-0x6f1f] Oct 1 21:14:14 Hilbert kernel: [ 0.380628] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03 Oct 1 21:14:14 Hilbert kernel: [ 0.380653] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff] Oct 1 21:14:14 Hilbert kernel: [ 0.380748] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold Oct 1 21:14:14 Hilbert kernel: [ 0.380754] pci 0000:00:1a.7: PME# disabled Oct 1 21:14:14 Hilbert kernel: [ 0.380785] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403 Oct 1 21:14:14 Hilbert kernel: [ 0.380808] pci 0000:00:1b.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit] Oct 1 21:14:14 Hilbert kernel: [ 0.380894] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold Oct 1 21:14:14 Hilbert kernel: [ 0.380899] pci 0000:00:1b.0: PME# disabled Oct 1 21:14:14 Hilbert kernel: [ 0.380928] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604 Oct 1 21:14:14 Hilbert kernel: [ 0.381019] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Oct 1 21:14:14 Hilbert kernel: [ 0.381024] pci 0000:00:1c.0: PME# disabled Oct 1 21:14:14 Hilbert kernel: [ 0.381060] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604 Oct 1 21:14:14 Hilbert kernel: [ 0.381150] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold Oct 1 21:14:14 Hilbert kernel: [ 0.381155] pci 0000:00:1c.1: PME# disabled Oct 1 21:14:14 Hilbert kernel: [ 0.381189] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604 Oct 1 21:14:14 Hilbert kernel: [ 0.381278] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold Oct 1 21:14:14 Hilbert kernel: [ 0.381283] pci 0000:00:1c.3: PME# disabled Oct 1 21:14:14 Hilbert kernel: [ 0.381318] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03 Oct 1 21:14:14 Hilbert kernel: [ 0.381378] pci 0000:00:1d.0: reg 20: [io 0x6f80-0x6f9f] Oct 1 21:14:14 Hilbert kernel: [ 0.381419] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03 Oct 1 21:14:14 Hilbert kernel: [ 0.381479] pci 0000:00:1d.1: reg 20: [io 0x6f60-0x6f7f] Oct 1 21:14:14 Hilbert kernel: [ 0.381521] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03 Oct 1 21:14:14 Hilbert kernel: [ 0.381580] pci 0000:00:1d.2: reg 20: [io 0x6f40-0x6f5f] Oct 1 21:14:14 Hilbert kernel: [ 0.381636] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03 Oct 1 21:14:14 Hilbert kernel: [ 0.381661] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff] Oct 1 21:14:14 Hilbert kernel: [ 0.381754] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold Oct 1 21:14:14 Hilbert kernel: [ 0.381760] pci 0000:00:1d.7: PME# disabled Oct 1 21:14:14 Hilbert kernel: [ 0.381787] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 Oct 1 21:14:14 Hilbert kernel: [ 0.381876] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601 Oct 1 21:14:14 Hilbert kernel: [ 0.381995] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO Oct 1 21:14:14 Hilbert kernel: [ 0.382002] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO Oct 1 21:14:14 Hilbert kernel: [ 0.382007] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) Oct 1 21:14:14 Hilbert kernel: [ 0.382013] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) Oct 1 21:14:14 Hilbert kernel: [ 0.382063] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101 Oct 1 21:14:14 Hilbert kernel: [ 0.382080] pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7] Oct 1 21:14:14 Hilbert kernel: [ 0.382093] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7] Oct 1 21:14:14 Hilbert kernel: [ 0.382105] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177] Oct 1 21:14:14 Hilbert kernel: [ 0.382118] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377] Oct 1 21:14:14 Hilbert kernel: [ 0.382130] pci 0000:00:1f.1: reg 20: [io 0x6fa0-0x6faf] Oct 1 21:14:14 Hilbert kernel: [ 0.382184] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106 Oct 1 21:14:14 Hilbert kernel: [ 0.382212] pci 0000:00:1f.2: reg 10: [io 0x6eb0-0x6eb7] Oct 1 21:14:14 Hilbert kernel: [ 0.382226] pci 0000:00:1f.2: reg 14: [io 0x6eb8-0x6ebb] Oct 1 21:14:14 Hilbert kernel: [ 0.382238] pci 0000:00:1f.2: reg 18: [io 0x6ec0-0x6ec7] Oct 1 21:14:14 Hilbert kernel: [ 0.382251] pci 0000:00:1f.2: reg 1c: [io 0x6ec8-0x6ecb] Oct 1 21:14:14 Hilbert kernel: [ 0.382263] pci 0000:00:1f.2: reg 20: [io 0x6ee0-0x6eff] Oct 1 21:14:14 Hilbert kernel: [ 0.382276] pci 0000:00:1f.2: reg 24: [mem 0xfebfb800-0xfebfbfff] Oct 1 21:14:14 Hilbert kernel: [ 0.382325] pci 0000:00:1f.2: PME# supported from D3hot Oct 1 21:14:14 Hilbert kernel: [ 0.382330] pci 0000:00:1f.2: PME# disabled Oct 1 21:14:14 Hilbert kernel: [ 0.382353] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05 Oct 1 21:14:14 Hilbert kernel: [ 0.382370] pci 0000:00:1f.3: reg 10: [mem 0xfebfb700-0xfebfb7ff] Oct 1 21:14:14 Hilbert kernel: [ 0.382415] pci 0000:00:1f.3: reg 20: [io 0x10c0-0x10df] Oct 1 21:14:14 Hilbert kernel: [ 0.382503] pci 0000:01:00.0: [10de:0407] type 0 class 0x000300 Oct 1 21:14:14 Hilbert kernel: [ 0.382523] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff] Oct 1 21:14:14 Hilbert kernel: [ 0.382545] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] Oct 1 21:14:14 Hilbert kernel: [ 0.382567] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit] Oct 1 21:14:14 Hilbert kernel: [ 0.382582] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f] Oct 1 21:14:14 Hilbert kernel: [ 0.382597] pci 0000:01:00.0: reg 30: [mem 0xfea00000-0xfea1ffff pref] Oct 1 21:14:14 Hilbert kernel: [ 0.382680] pci 0000:00:01.0: PCI bridge to [bus 01-01] Oct 1 21:14:14 Hilbert kernel: [ 0.382684] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] Oct 1 21:14:14 Hilbert kernel: [ 0.382688] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff] Oct 1 21:14:14 Hilbert kernel: [ 0.382692] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] Oct 1 21:14:14 Hilbert kernel: [ 0.382755] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b] Oct 1 21:14:14 Hilbert kernel: [ 0.382761] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) Oct 1 21:14:14 Hilbert kernel: [ 0.382766] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) Oct 1 21:14:14 Hilbert kernel: [ 0.382775] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Oct 1 21:14:14 Hilbert kernel: [ 0.382939] pci 0000:0c:00.0: [8086:4222] type 0 class 0x000280 Oct 1 21:14:14 Hilbert kernel: [ 0.382996] pci 0000:0c:00.0: reg 10: [mem 0xf9fff000-0xf9ffffff] Oct 1 21:14:14 Hilbert kernel: [ 0.383342] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold Oct 1 21:14:14 Hilbert kernel: [ 0.383355] pci 0000:0c:00.0: PME# disabled Oct 1 21:14:14 Hilbert kernel: [ 0.383426] pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' Oct 1 21:14:14 Hilbert kernel: [ 0.383454] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c] Oct 1 21:14:14 Hilbert kernel: [ 0.383459] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) Oct 1 21:14:14 Hilbert kernel: [ 0.383464] pci 0000:00:1c.1: bridge window [mem 0xf9f00000-0xf9ffffff] Oct 1 21:14:14 Hilbert kernel: [ 0.383473] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Oct 1 21:14:14 Hilbert kernel: [ 0.383536] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e] Oct 1 21:14:14 Hilbert kernel: [ 0.383541] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] Oct 1 21:14:14 Hilbert kernel: [ 0.383546] pci 0000:00:1c.3: bridge window [mem 0xf9c00000-0xf9efffff] Oct 1 21:14:14 Hilbert kernel: [ 0.383555] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] Oct 1 21:14:14 Hilbert kernel: [ 0.383604] pci 0000:03:00.0: [14e4:170c] type 0 class 0x000200 Oct 1 21:14:14 Hilbert kernel: [ 0.383626] pci 0000:03:00.0: reg 10: [mem 0xf9bfe000-0xf9bfffff] Oct 1 21:14:14 Hilbert kernel: [ 0.383713] pci 0000:03:00.0: supports D1 D2 Oct 1 21:14:14 Hilbert kernel: [ 0.383715] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold Oct 1 21:14:14 Hilbert kernel: [ 0.383720] pci 0000:03:00.0: PME# disabled Oct 1 21:14:14 Hilbert kernel: [ 0.383742] pci 0000:03:01.0: [1180:0832] type 0 class 0x000c00 Oct 1 21:14:14 Hilbert kernel: [ 0.383760] pci 0000:03:01.0: proprietary Ricoh MMC controller disabled (via firewire function) Oct 1 21:14:14 Hilbert kernel: [ 0.383762] pci 0000:03:01.0: MMC cards are now supported by standard SDHCI controller Oct 1 21:14:14 Hilbert kernel: [ 0.383779] pci 0000:03:01.0: reg 10: [mem 0xf9bfd800-0xf9bfdfff] Oct 1 21:14:14 Hilbert kernel: [ 0.383871] pci 0000:03:01.0: supports D1 D2 Oct 1 21:14:14 Hilbert kernel: [ 0.383873] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold Oct 1 21:14:14 Hilbert kernel: [ 0.383878] pci 0000:03:01.0: PME# disabled Oct 1 21:14:14 Hilbert kernel: [ 0.383900] pci 0000:03:01.1: [1180:0822] type 0 class 0x000805 Oct 1 21:14:14 Hilbert kernel: [ 0.383924] pci 0000:03:01.1: reg 10: [mem 0xf9bfd400-0xf9bfd4ff] Oct 1 21:14:14 Hilbert kernel: [ 0.384014] pci 0000:03:01.1: supports D1 D2 Oct 1 21:14:14 Hilbert kernel: [ 0.384017] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold Oct 1 21:14:14 Hilbert kernel: [ 0.384022] pci 0000:03:01.1: PME# disabled Oct 1 21:14:14 Hilbert kernel: [ 0.384047] pci 0000:03:01.2: [1180:0592] type 0 class 0x000880 Oct 1 21:14:14 Hilbert kernel: [ 0.384071] pci 0000:03:01.2: reg 10: [mem 0xf9bfd600-0xf9bfd6ff] Oct 1 21:14:14 Hilbert kernel: [ 0.384162] pci 0000:03:01.2: supports D1 D2 Oct 1 21:14:14 Hilbert kernel: [ 0.384164] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold Oct 1 21:14:14 Hilbert kernel: [ 0.384169] pci 0000:03:01.2: PME# disabled Oct 1 21:14:14 Hilbert kernel: [ 0.384193] pci 0000:03:01.3: [1180:0852] type 0 class 0x000880 Oct 1 21:14:14 Hilbert kernel: [ 0.384217] pci 0000:03:01.3: reg 10: [mem 0xf9bfd700-0xf9bfd7ff] Oct 1 21:14:14 Hilbert kernel: [ 0.384307] pci 0000:03:01.3: supports D1 D2 Oct 1 21:14:14 Hilbert kernel: [ 0.384309] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold Oct 1 21:14:14 Hilbert kernel: [ 0.384315] pci 0000:03:01.3: PME# disabled Oct 1 21:14:14 Hilbert kernel: [ 0.384389] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) Oct 1 21:14:14 Hilbert kernel: [ 0.384395] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) Oct 1 21:14:14 Hilbert kernel: [ 0.384400] pci 0000:00:1e.0: bridge window [mem 0xf9b00000-0xf9bfffff] Oct 1 21:14:14 Hilbert kernel: [ 0.384409] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Oct 1 21:14:14 Hilbert kernel: [ 0.384412] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) Oct 1 21:14:14 Hilbert kernel: [ 0.384414] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) Oct 1 21:14:14 Hilbert kernel: [ 0.384448] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Oct 1 21:14:14 Hilbert kernel: [ 0.384642] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] Oct 1 21:14:14 Hilbert kernel: [ 0.384728] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] Oct 1 21:14:14 Hilbert kernel: [ 0.384766] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] Oct 1 21:14:14 Hilbert kernel: [ 0.384806] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] Oct 1 21:14:14 Hilbert kernel: [ 0.384848] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] Oct 1 21:14:14 Hilbert kernel: [ 0.384891] pci0000:00: Requesting ACPI _OSC control (0x1d) Oct 1 21:14:14 Hilbert kernel: [ 0.384895] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d Oct 1 21:14:14 Hilbert kernel: [ 0.384897] ACPI _OSC control for PCIe not granted, disabling ASPM Oct 1 21:14:14 Hilbert kernel: [ 0.392552] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *7 Oct 1 21:14:14 Hilbert kernel: [ 0.392619] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 Oct 1 21:14:14 Hilbert kernel: [ 0.392680] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4 Oct 1 21:14:14 Hilbert kernel: [ 0.392745] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11) Oct 1 21:14:14 Hilbert kernel: [ 0.392807] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Oct 1 21:14:14 Hilbert kernel: [ 0.392871] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Oct 1 21:14:14 Hilbert kernel: [ 0.392935] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) Oct 1 21:14:14 Hilbert kernel: [ 0.392989] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. Oct 1 21:14:14 Hilbert kernel: [ 0.393131] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none Oct 1 21:14:14 Hilbert kernel: [ 0.393136] vgaarb: loaded Oct 1 21:14:14 Hilbert kernel: [ 0.393138] vgaarb: bridge control possible 0000:01:00.0 Oct 1 21:14:14 Hilbert kernel: [ 0.393341] SCSI subsystem initialized Oct 1 21:14:14 Hilbert kernel: [ 0.393416] libata version 3.00 loaded. Oct 1 21:14:14 Hilbert kernel: [ 0.393461] usbcore: registered new interface driver usbfs Oct 1 21:14:14 Hilbert kernel: [ 0.393472] usbcore: registered new interface driver hub Oct 1 21:14:14 Hilbert kernel: [ 0.393501] usbcore: registered new device driver usb Oct 1 21:14:14 Hilbert kernel: [ 0.393593] PCI: Using ACPI for IRQ routing Oct 1 21:14:14 Hilbert kernel: [ 0.396236] PCI: pci_cache_line_size set to 64 bytes Oct 1 21:14:14 Hilbert kernel: [ 0.396364] reserve RAM buffer: 000000000009f000 - 000000000009ffff Oct 1 21:14:14 Hilbert kernel: [ 0.396366] reserve RAM buffer: 000000007fe6d800 - 000000007fffffff Oct 1 21:14:14 Hilbert kernel: [ 0.396466] NetLabel: Initializing Oct 1 21:14:14 Hilbert kernel: [ 0.396468] NetLabel: domain hash size = 128 Oct 1 21:14:14 Hilbert kernel: [ 0.396470] NetLabel: protocols = UNLABELED CIPSOv4 Oct 1 21:14:14 Hilbert kernel: [ 0.396483] NetLabel: unlabeled traffic allowed by default Oct 1 21:14:14 Hilbert kernel: [ 0.396524] HPET: 3 timers in total, 0 timers will be used for per-cpu timer Oct 1 21:14:14 Hilbert kernel: [ 0.396530] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Oct 1 21:14:14 Hilbert kernel: [ 0.396534] hpet0: 3 comparators, 64-bit 14.318180 MHz counter Oct 1 21:14:14 Hilbert kernel: [ 0.400078] Switching to clocksource hpet Oct 1 21:14:14 Hilbert kernel: [ 0.407393] AppArmor: AppArmor Filesystem Enabled Oct 1 21:14:14 Hilbert kernel: [ 0.407438] pnp: PnP ACPI init Oct 1 21:14:14 Hilbert kernel: [ 0.407459] ACPI: bus type pnp registered Oct 1 21:14:14 Hilbert kernel: [ 0.409678] Switched to NOHz mode on CPU #0 Oct 1 21:14:14 Hilbert kernel: [ 0.409882] Switched to NOHz mode on CPU #1 Oct 1 21:14:14 Hilbert kernel: [ 0.416042] pnp 00:00: [bus 00-ff] Oct 1 21:14:14 Hilbert kernel: [ 0.416045] pnp 00:00: [io 0x0000-0x0cf7 window] Oct 1 21:14:14 Hilbert kernel: [ 0.416048] pnp 00:00: [io 0x0cf8-0x0cff] Oct 1 21:14:14 Hilbert kernel: [ 0.416051] pnp 00:00: [io 0x0d00-0xffff window] Oct 1 21:14:14 Hilbert kernel: [ 0.416053] pnp 00:00: [mem 0x000a0000-0x000bffff window] Oct 1 21:14:14 Hilbert kernel: [ 0.416055] pnp 00:00: [mem 0x000d0000-0x000dffff window] Oct 1 21:14:14 Hilbert kernel: [ 0.416058] pnp 00:00: [mem 0x80000000-0xf3ffffff window] Oct 1 21:14:14 Hilbert kernel: [ 0.416060] pnp 00:00: [mem 0xf8000000-0xfebfffff window] Oct 1 21:14:14 Hilbert kernel: [ 0.416062] pnp 00:00: [mem 0xfec10000-0xfecfffff window] Oct 1 21:14:14 Hilbert kernel: [ 0.416065] pnp 00:00: [mem 0xfed1c000-0xfed1ffff window] Oct 1 21:14:14 Hilbert kernel: [ 0.416067] pnp 00:00: [mem 0xfed90000-0xfed9ffff window] Oct 1 21:14:14 Hilbert kernel: [ 0.416069] pnp 00:00: [mem 0xfeda7000-0xfedfffff window] Oct 1 21:14:14 Hilbert kernel: [ 0.416071] pnp 00:00: [mem 0xfee10000-0xff9fffff window] Oct 1 21:14:14 Hilbert kernel: [ 0.416077] pnp 00:00: [mem 0xffb00000-0xffefffff window] Oct 1 21:14:14 Hilbert kernel: [ 0.416168] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) Oct 1 21:14:14 Hilbert kernel: [ 0.416198] pnp 00:01: [irq 12] Oct 1 21:14:14 Hilbert kernel: [ 0.416221] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active) Oct 1 21:14:14 Hilbert kernel: [ 0.416236] pnp 00:02: [io 0x0060] Oct 1 21:14:14 Hilbert kernel: [ 0.416238] pnp 00:02: [io 0x0064] Oct 1 21:14:14 Hilbert kernel: [ 0.416239] pnp 00:02: [io 0x0062] Oct 1 21:14:14 Hilbert kernel: [ 0.416241] pnp 00:02: [io 0x0066] Oct 1 21:14:14 Hilbert kernel: [ 0.416247] pnp 00:02: [irq 1] Oct 1 21:14:14 Hilbert kernel: [ 0.416271] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) Oct 1 21:14:14 Hilbert kernel: [ 0.416286] pnp 00:03: [io 0x0070-0x0071] Oct 1 21:14:14 Hilbert kernel: [ 0.416292] pnp 00:03: [irq 8] Oct 1 21:14:14 Hilbert kernel: [ 0.416294] pnp 00:03: [io 0x0072-0x0077] Oct 1 21:14:14 Hilbert kernel: [ 0.416315] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) Oct 1 21:14:14 Hilbert kernel: [ 0.416331] pnp 00:04: [io 0x0061] Oct 1 21:14:14 Hilbert kernel: [ 0.416333] pnp 00:04: [io 0x0063] Oct 1 21:14:14 Hilbert kernel: [ 0.416334] pnp 00:04: [io 0x0065] Oct 1 21:14:14 Hilbert kernel: [ 0.416336] pnp 00:04: [io 0x0067] Oct 1 21:14:14 Hilbert kernel: [ 0.416358] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) Oct 1 21:14:14 Hilbert kernel: [ 0.416371] pnp 00:05: [io 0x0c80-0x0cff] Oct 1 21:14:14 Hilbert kernel: [ 0.416432] system 00:05: [io 0x0c80-0x0cff] could not be reserved Oct 1 21:14:14 Hilbert kernel: [ 0.416436] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) Oct 1 21:14:14 Hilbert kernel: [ 0.416453] pnp 00:06: [dma 4] Oct 1 21:14:14 Hilbert kernel: [ 0.416455] pnp 00:06: [io 0x0000-0x000f] Oct 1 21:14:14 Hilbert kernel: [ 0.416457] pnp 00:06: [io 0x0080-0x0085] Oct 1 21:14:14 Hilbert kernel: [ 0.416458] pnp 00:06: [io 0x0087-0x008f] Oct 1 21:14:14 Hilbert kernel: [ 0.416460] pnp 00:06: [io 0x00c0-0x00df] Oct 1 21:14:14 Hilbert kernel: [ 0.416462] pnp 00:06: [io 0x0010-0x001f] Oct 1 21:14:14 Hilbert kernel: [ 0.416464] pnp 00:06: [io 0x0090-0x0091] Oct 1 21:14:14 Hilbert kernel: [ 0.416466] pnp 00:06: [io 0x0093-0x009f] Oct 1 21:14:14 Hilbert kernel: [ 0.416490] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active) Oct 1 21:14:14 Hilbert kernel: [ 0.416504] pnp 00:07: [io 0x00f0-0x00ff] Oct 1 21:14:14 Hilbert kernel: [ 0.416510] pnp 00:07: [irq 13] Oct 1 21:14:14 Hilbert kernel: [ 0.416536] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) Oct 1 21:14:14 Hilbert kernel: [ 0.416571] pnp 00:08: [mem 0xfed00000-0xfed003ff] Oct 1 21:14:14 Hilbert kernel: [ 0.416620] system 00:08: [mem 0xfed00000-0xfed003ff] has been reserved Oct 1 21:14:14 Hilbert kernel: [ 0.416624] system 00:08: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) Oct 1 21:14:14 Hilbert kernel: [ 0.416748] pnp 00:09: [io 0x0900-0x097f] Oct 1 21:14:14 Hilbert kernel: [ 0.416750] pnp 00:09: [io 0x0092] Oct 1 21:14:14 Hilbert kernel: [ 0.416752] pnp 00:09: [io 0x00b2-0x00b3] Oct 1 21:14:14 Hilbert kernel: [ 0.416754] pnp 00:09: [io 0x0020-0x0021] Oct 1 21:14:14 Hilbert kernel: [ 0.416756] pnp 00:09: [io 0x00a0-0x00a1] Oct 1 21:14:14 Hilbert kernel: [ 0.416758] pnp 00:09: [irq 0 disabled] Oct 1 21:14:14 Hilbert kernel: [ 0.416760] pnp 00:09: [io 0x04d0-0x04d1] Oct 1 21:14:14 Hilbert kernel: [ 0.416761] pnp 00:09: [io 0x1000-0x1005] Oct 1 21:14:14 Hilbert kernel: [ 0.416763] pnp 00:09: [io 0x1008-0x100f] Oct 1 21:14:14 Hilbert kernel: [ 0.416778] pnp 00:09: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] Oct 1 21:14:14 Hilbert kernel: [ 0.416781] pnp 00:09: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] Oct 1 21:14:14 Hilbert kernel: [ 0.416832] system 00:09: [io 0x0900-0x097f] has been reserved Oct 1 21:14:14 Hilbert kernel: [ 0.416835] system 00:09: [io 0x04d0-0x04d1] has been reserved Oct 1 21:14:14 Hilbert kernel: [ 0.416838] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) Oct 1 21:14:14 Hilbert kernel: [ 0.416854] pnp 00:0a: [io 0xf400-0xf4fe] Oct 1 21:14:14 Hilbert kernel: [ 0.416856] pnp 00:0a: [io 0x0086] Oct 1 21:14:14 Hilbert kernel: [ 0.416858] pnp 00:0a: [io 0x1006-0x1007] Oct 1 21:14:14 Hilbert kernel: [ 0.416860] pnp 00:0a: [io 0x100a-0x1059] Oct 1 21:14:14 Hilbert kernel: [ 0.416862] pnp 00:0a: [io 0x1060-0x107f] Oct 1 21:14:14 Hilbert kernel: [ 0.416864] pnp 00:0a: [io 0x1080-0x10bf] Oct 1 21:14:14 Hilbert kernel: [ 0.416866] pnp 00:0a: [io 0x10c0-0x10df] Oct 1 21:14:14 Hilbert kernel: [ 0.416875] pnp 00:0a: [io 0x1010-0x102f] Oct 1 21:14:14 Hilbert kernel: [ 0.416876] pnp 00:0a: [io 0x0809] Oct 1 21:14:14 Hilbert kernel: [ 0.416890] pnp 00:0a: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] Oct 1 21:14:14 Hilbert kernel: [ 0.416894] pnp 00:0a: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] Oct 1 21:14:14 Hilbert kernel: [ 0.416897] pnp 00:0a: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] Oct 1 21:14:14 Hilbert kernel: [ 0.416900] pnp 00:0a: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] Oct 1 21:14:14 Hilbert kernel: [ 0.416954] system 00:0a: [io 0xf400-0xf4fe] has been reserved Oct 1 21:14:14 Hilbert kernel: [ 0.416957] system 00:0a: [io 0x1080-0x10bf] has been reserved Oct 1 21:14:14 Hilbert kernel: [ 0.416960] system 00:0a: [io 0x10c0-0x10df] has been reserved Oct 1 21:14:14 Hilbert kernel: [ 0.416962] system 00:0a: [io 0x0809] has been reserved Oct 1 21:14:14 Hilbert kernel: [ 0.416966] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) Oct 1 21:14:14 Hilbert kernel: [ 0.426552] pnp 00:0b: [mem 0x00000000-0x0009efff] Oct 1 21:14:14 Hilbert kernel: [ 0.426556] pnp 00:0b: [mem 0x0009f000-0x0009ffff] Oct 1 21:14:14 Hilbert kernel: [ 0.426558] pnp 00:0b: [mem 0x000c0000-0x000cffff] Oct 1 21:14:14 Hilbert kernel: [ 0.426560] pnp 00:0b: [mem 0x000e0000-0x000fffff] Oct 1 21:14:14 Hilbert kernel: [ 0.426562] pnp 00:0b: [mem 0x00100000-0x7fe6d7ff] Oct 1 21:14:14 Hilbert kernel: [ 0.426564] pnp 00:0b: [mem 0x7fe6d800-0x7fefffff] Oct 1 21:14:14 Hilbert kernel: [ 0.426567] pnp 00:0b: [mem 0x7ff00000-0x7fffffff] Oct 1 21:14:14 Hilbert kernel: [ 0.426569] pnp 00:0b: [mem 0x7ff00000-0x806fffff] Oct 1 21:14:14 Hilbert kernel: [ 0.426570] pnp 00:0b: [mem 0xfff00000-0xffffffff] Oct 1 21:14:14 Hilbert kernel: [ 0.426572] pnp 00:0b: [mem 0xffa00000-0xffafffff] Oct 1 21:14:14 Hilbert kernel: [ 0.426574] pnp 00:0b: [mem 0xfec00000-0xfec0ffff] Oct 1 21:14:14 Hilbert kernel: [ 0.426576] pnp 00:0b: [mem 0xfee00000-0xfee0ffff] Oct 1 21:14:14 Hilbert kernel: [ 0.426578] pnp 00:0b: [mem 0xfed20000-0xfed8ffff] Oct 1 21:14:14 Hilbert kernel: [ 0.426580] pnp 00:0b: [mem 0xfeda0000-0xfeda3fff] Oct 1 21:14:14 Hilbert kernel: [ 0.426582] pnp 00:0b: [mem 0xfeda4000-0xfeda4fff] Oct 1 21:14:14 Hilbert kernel: [ 0.426584] pnp 00:0b: [mem 0xfeda5000-0xfeda5fff] Oct 1 21:14:14 Hilbert kernel: [ 0.426586] pnp 00:0b: [mem 0xfeda6000-0xfeda6fff] Oct 1 21:14:14 Hilbert kernel: [ 0.426588] pnp 00:0b: [mem 0xfed18000-0xfed1bfff] Oct 1 21:14:14 Hilbert kernel: [ 0.426590] pnp 00:0b: [mem 0xf4000000-0xf7ffffff] Oct 1 21:14:14 Hilbert kernel: [ 0.426694] system 00:0b: [mem 0x00000000-0x0009efff] could not be reserved Oct 1 21:14:14 Hilbert kernel: [ 0.426697] system 00:0b: [mem 0x0009f000-0x0009ffff] could not be reserved Oct 1 21:14:14 Hilbert kernel: [ 0.426700] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved Oct 1 21:14:14 Hilbert kernel: [ 0.426703] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved Oct 1 21:14:14 Hilbert kernel: [ 0.426706] system 00:0b: [mem 0x00100000-0x7fe6d7ff] could not be reserved Oct 1 21:14:14 Hilbert kernel: [ 0.426709] system 00:0b: [mem 0x7fe6d800-0x7fefffff] has been reserved Oct 1 21:14:14 Hilbert kernel: [ 0.426712] system 00:0b: [mem 0x7ff00000-0x7fffffff] has been reserved Oct 1 21:14:14 Hilbert kernel: [ 0.426715] system 00:0b: [mem 0x7ff00000-0x806fffff] could not be reserved Oct 1 21:14:14 Hilbert kernel: [ 0.426718] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved Oct 1 21:14:14 Hilbert kernel: [ 0.426721] system 00:0b: [mem 0xffa00000-0xffafffff] has been reserved Oct 1 21:14:14 Hilbert kernel: [ 0.426724] system 00:0b: [mem 0xfec00000-0xfec0ffff] could not be reserved Oct 1 21:14:14 Hilbert kernel: [ 0.426727] system 00:0b: [mem 0xfee00000-0xfee0ffff] has been reserved Oct 1 21:14:14 Hilbert kernel: [ 0.426729] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved Oct 1 21:14:14 Hilbert kernel: [ 0.426732] system 00:0b: [mem 0xfeda0000-0xfeda3fff] has been reserved Oct 1 21:14:14 Hilbert kernel: [ 0.426735] system 00:0b: [mem 0xfeda4000-0xfeda4fff] has been reserved Oct 1 21:14:14 Hilbert kernel: [ 0.426738] system 00:0b: [mem 0xfeda5000-0xfeda5fff] has been reserved Oct 1 21:14:14 Hilbert kernel: [ 0.426741] system 00:0b: [mem 0xfeda6000-0xfeda6fff] has been reserved Oct 1 21:14:14 Hilbert kernel: [ 0.426743] system 00:0b: [mem 0xfed18000-0xfed1bfff] has been reserved Oct 1 21:14:14 Hilbert kernel: [ 0.426746] system 00:0b: [mem 0xf4000000-0xf7ffffff] has been reserved Oct 1 21:14:14 Hilbert kernel: [ 0.426750] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) Oct 1 21:14:14 Hilbert kernel: [ 0.426804] pnp: PnP ACPI: found 12 devices Oct 1 21:14:14 Hilbert kernel: [ 0.426806] ACPI: ACPI bus type pnp unregistered Oct 1 21:14:14 Hilbert kernel: [ 0.432883] PCI: max bus depth: 1 pci_try_num: 2 Oct 1 21:14:14 Hilbert kernel: [ 0.432945] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref] Oct 1 21:14:14 Hilbert kernel: [ 0.432949] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff] Oct 1 21:14:14 Hilbert kernel: [ 0.432953] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80200000-0x803fffff] Oct 1 21:14:14 Hilbert kernel: [ 0.432957] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref] Oct 1 21:14:14 Hilbert kernel: [ 0.432960] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff] Oct 1 21:14:14 Hilbert kernel: [ 0.432963] pci 0000:00:01.0: PCI bridge to [bus 01-01] Oct 1 21:14:14 Hilbert kernel: [ 0.432966] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] Oct 1 21:14:14 Hilbert kernel: [ 0.432970] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff] Oct 1 21:14:14 Hilbert kernel: [ 0.432973] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] Oct 1 21:14:14 Hilbert kernel: [ 0.432978] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b] Oct 1 21:14:14 Hilbert kernel: [ 0.432982] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] Oct 1 21:14:14 Hilbert kernel: [ 0.432988] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff] Oct 1 21:14:14 Hilbert kernel: [ 0.432994] pci 0000:00:1c.0: bridge window [mem 0x80400000-0x805fffff 64bit pref] Oct 1 21:14:14 Hilbert kernel: [ 0.433002] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c] Oct 1 21:14:14 Hilbert kernel: [ 0.433006] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] Oct 1 21:14:14 Hilbert kernel: [ 0.433012] pci 0000:00:1c.1: bridge window [mem 0xf9f00000-0xf9ffffff] Oct 1 21:14:14 Hilbert kernel: [ 0.433017] pci 0000:00:1c.1: bridge window [mem 0x80000000-0x801fffff 64bit pref] Oct 1 21:14:14 Hilbert kernel: [ 0.433026] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e] Oct 1 21:14:14 Hilbert kernel: [ 0.433029] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] Oct 1 21:14:14 Hilbert kernel: [ 0.433036] pci 0000:00:1c.3: bridge window [mem 0xf9c00000-0xf9efffff] Oct 1 21:14:14 Hilbert kernel: [ 0.433041] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] Oct 1 21:14:14 Hilbert kernel: [ 0.433050] pci 0000:00:1e.0: PCI bridge to [bus 03-03] Oct 1 21:14:14 Hilbert kernel: [ 0.433052] pci 0000:00:1e.0: bridge window [io disabled] Oct 1 21:14:14 Hilbert kernel: [ 0.433059] pci 0000:00:1e.0: bridge window [mem 0xf9b00000-0xf9bfffff] Oct 1 21:14:14 Hilbert kernel: [ 0.433064] pci 0000:00:1e.0: bridge window [mem pref disabled] Oct 1 21:14:14 Hilbert kernel: [ 0.433094] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Oct 1 21:14:14 Hilbert kernel: [ 0.433099] pci 0000:00:01.0: setting latency timer to 64 Oct 1 21:14:14 Hilbert kernel: [ 0.433108] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Oct 1 21:14:14 Hilbert kernel: [ 0.433113] pci 0000:00:1c.0: setting latency timer to 64 Oct 1 21:14:14 Hilbert kernel: [ 0.433124] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Oct 1 21:14:14 Hilbert kernel: [ 0.433129] pci 0000:00:1c.1: setting latency timer to 64 Oct 1 21:14:14 Hilbert kernel: [ 0.433140] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 Oct 1 21:14:14 Hilbert kernel: [ 0.433145] pci 0000:00:1c.3: setting latency timer to 64 Oct 1 21:14:14 Hilbert kernel: [ 0.433154] pci 0000:00:1e.0: setting latency timer to 64 Oct 1 21:14:14 Hilbert kernel: [ 0.433159] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] Oct 1 21:14:14 Hilbert kernel: [ 0.433161] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff] Oct 1 21:14:14 Hilbert kernel: [ 0.433164] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] Oct 1 21:14:14 Hilbert kernel: [ 0.433166] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfeafffff] Oct 1 21:14:14 Hilbert kernel: [ 0.433168] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] Oct 1 21:14:14 Hilbert kernel: [ 0.433171] pci_bus 0000:0b: resource 0 [io 0x3000-0x3fff] Oct 1 21:14:14 Hilbert kernel: [ 0.433173] pci_bus 0000:0b: resource 1 [mem 0x80200000-0x803fffff] Oct 1 21:14:14 Hilbert kernel: [ 0.433175] pci_bus 0000:0b: resource 2 [mem 0x80400000-0x805fffff 64bit pref] Oct 1 21:14:14 Hilbert kernel: [ 0.433178] pci_bus 0000:0c: resource 0 [io 0x2000-0x2fff] Oct 1 21:14:14 Hilbert kernel: [ 0.433180] pci_bus 0000:0c: resource 1 [mem 0xf9f00000-0xf9ffffff] Oct 1 21:14:14 Hilbert kernel: [ 0.433182] pci_bus 0000:0c: resource 2 [mem 0x80000000-0x801fffff 64bit pref] Oct 1 21:14:14 Hilbert kernel: [ 0.433185] pci_bus 0000:0d: resource 0 [io 0xd000-0xdfff] Oct 1 21:14:14 Hilbert kernel: [ 0.433187] pci_bus 0000:0d: resource 1 [mem 0xf9c00000-0xf9efffff] Oct 1 21:14:14 Hilbert kernel: [ 0.433190] pci_bus 0000:0d: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] Oct 1 21:14:14 Hilbert kernel: [ 0.433192] pci_bus 0000:03: resource 1 [mem 0xf9b00000-0xf9bfffff] Oct 1 21:14:14 Hilbert kernel: [ 0.433195] pci_bus 0000:03: resource 4 [io 0x0000-0xffff] Oct 1 21:14:14 Hilbert kernel: [ 0.433197] pci_bus 0000:03: resource 5 [mem 0x00000000-0xfffffffff] Oct 1 21:14:14 Hilbert kernel: [ 0.433239] NET: Registered protocol family 2 Oct 1 21:14:14 Hilbert kernel: [ 0.433359] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) Oct 1 21:14:14 Hilbert kernel: [ 0.434079] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) Oct 1 21:14:14 Hilbert kernel: [ 0.436246] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) Oct 1 21:14:14 Hilbert kernel: [ 0.436832] TCP: Hash tables configured (established 262144 bind 65536) Oct 1 21:14:14 Hilbert kernel: [ 0.436835] TCP reno registered Oct 1 21:14:14 Hilbert kernel: [ 0.436843] UDP hash table entries: 1024 (order: 3, 32768 bytes) Oct 1 21:14:14 Hilbert kernel: [ 0.436866] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) Oct 1 21:14:14 Hilbert kernel: [ 0.437013] NET: Registered protocol family 1 Oct 1 21:14:14 Hilbert kernel: [ 0.437232] pci 0000:01:00.0: Boot video device Oct 1 21:14:14 Hilbert kernel: [ 0.437256] PCI: CLS 64 bytes, default 64 Oct 1 21:14:14 Hilbert kernel: [ 0.437281] Simple Boot Flag at 0x79 set to 0x1 Oct 1 21:14:14 Hilbert kernel: [ 0.437627] audit: initializing netlink socket (disabled) Oct 1 21:14:14 Hilbert kernel: [ 0.437638] type=2000 audit(1317496443.430:1): initialized Oct 1 21:14:14 Hilbert kernel: [ 0.465027] HugeTLB registered 2 MB page size, pre-allocated 0 pages Oct 1 21:14:14 Hilbert kernel: [ 0.477667] VFS: Disk quotas dquot_6.5.2 Oct 1 21:14:14 Hilbert kernel: [ 0.477729] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Oct 1 21:14:14 Hilbert kernel: [ 0.478320] fuse init (API version 7.16) Oct 1 21:14:14 Hilbert kernel: [ 0.478404] msgmni has been set to 3982 Oct 1 21:14:14 Hilbert kernel: [ 0.478732] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Oct 1 21:14:14 Hilbert kernel: [ 0.478762] io scheduler noop registered Oct 1 21:14:14 Hilbert kernel: [ 0.478764] io scheduler deadline registered Oct 1 21:14:14 Hilbert kernel: [ 0.478802] io scheduler cfq registered (default) Oct 1 21:14:14 Hilbert kernel: [ 0.478919] pcieport 0000:00:01.0: setting latency timer to 64 Oct 1 21:14:14 Hilbert kernel: [ 0.478954] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X Oct 1 21:14:14 Hilbert kernel: [ 0.479004] pcieport 0000:00:1c.0: setting latency timer to 64 Oct 1 21:14:14 Hilbert kernel: [ 0.479061] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X Oct 1 21:14:14 Hilbert kernel: [ 0.479139] pcieport 0000:00:1c.1: setting latency timer to 64 Oct 1 21:14:14 Hilbert kernel: [ 0.479195] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X Oct 1 21:14:14 Hilbert kernel: [ 0.479276] pcieport 0000:00:1c.3: setting latency timer to 64 Oct 1 21:14:14 Hilbert kernel: [ 0.479334] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X Oct 1 21:14:14 Hilbert kernel: [ 0.479429] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Oct 1 21:14:14 Hilbert kernel: [ 0.479451] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 Oct 1 21:14:14 Hilbert kernel: [ 0.479495] intel_idle: MWAIT substates: 0x22220 Oct 1 21:14:14 Hilbert kernel: [ 0.479497] intel_idle: does not run on family 6 model 15 Oct 1 21:14:14 Hilbert kernel: [ 0.479570] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared Oct 1 21:14:14 Hilbert kernel: [ 0.479618] ACPI: AC Adapter [AC] (off-line) Oct 1 21:14:14 Hilbert kernel: [ 0.479687] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 Oct 1 21:14:14 Hilbert kernel: [ 0.480217] ACPI: Lid Switch [LID] Oct 1 21:14:14 Hilbert kernel: [ 0.480262] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 Oct 1 21:14:14 Hilbert kernel: [ 0.480267] ACPI: Power Button [PBTN] Oct 1 21:14:14 Hilbert kernel: [ 0.480308] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 Oct 1 21:14:14 Hilbert kernel: [ 0.480312] ACPI: Sleep Button [SBTN] Oct 1 21:14:14 Hilbert kernel: [ 0.480337] ACPI: acpi_idle registered with cpuidle Oct 1 21:14:14 Hilbert kernel: [ 0.480480] Monitor-Mwait will be used to enter C-1 state Oct 1 21:14:14 Hilbert kernel: [ 0.480511] Monitor-Mwait will be used to enter C-2 state Oct 1 21:14:14 Hilbert kernel: [ 0.480535] Monitor-Mwait will be used to enter C-3 state Oct 1 21:14:14 Hilbert kernel: [ 0.480540] Marking TSC unstable due to TSC halts in idle Oct 1 21:14:14 Hilbert kernel: [ 0.505150] thermal LNXTHERM:00: registered as thermal_zone0 Oct 1 21:14:14 Hilbert kernel: [ 0.505153] ACPI: Thermal Zone [THM] (58 C) Oct 1 21:14:14 Hilbert kernel: [ 0.505181] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared Oct 1 21:14:14 Hilbert kernel: [ 0.505232] ERST: Table is not found! Oct 1 21:14:14 Hilbert kernel: [ 0.520168] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled Oct 1 21:14:14 Hilbert kernel: [ 0.523754] ACPI: Battery Slot [BAT0] (battery present) Oct 1 21:14:14 Hilbert kernel: [ 0.640934] Freeing initrd memory: 13416k freed Oct 1 21:14:14 Hilbert kernel: [ 0.691569] Linux agpgart interface v0.103 Oct 1 21:14:14 Hilbert kernel: [ 0.692809] brd: module loaded Oct 1 21:14:14 Hilbert kernel: [ 0.693317] loop: module loaded Oct 1 21:14:14 Hilbert kernel: [ 0.693462] ata_piix 0000:00:1f.1: version 2.13 Oct 1 21:14:14 Hilbert kernel: [ 0.693476] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Oct 1 21:14:14 Hilbert kernel: [ 0.693521] ata_piix 0000:00:1f.1: setting latency timer to 64 Oct 1 21:14:14 Hilbert kernel: [ 0.693840] scsi0 : ata_piix Oct 1 21:14:14 Hilbert kernel: [ 0.693931] scsi1 : ata_piix Oct 1 21:14:14 Hilbert kernel: [ 0.694219] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 Oct 1 21:14:14 Hilbert kernel: [ 0.694222] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 Oct 1 21:14:14 Hilbert kernel: [ 0.694272] ata2: port disabled. ignoring. Oct 1 21:14:14 Hilbert kernel: [ 0.694530] Fixed MDIO Bus: probed Oct 1 21:14:14 Hilbert kernel: [ 0.694555] PPP generic driver version 2.4.2 Oct 1 21:14:14 Hilbert kernel: [ 0.694593] tun: Universal TUN/TAP device driver, 1.6 Oct 1 21:14:14 Hilbert kernel: [ 0.694595] tun: (C) 1999-2004 Max Krasnyansky Oct 1 21:14:14 Hilbert kernel: [ 0.694669] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Oct 1 21:14:14 Hilbert kernel: [ 0.694692] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 Oct 1 21:14:14 Hilbert kernel: [ 0.694706] ehci_hcd 0000:00:1a.7: setting latency timer to 64 Oct 1 21:14:14 Hilbert kernel: [ 0.694710] ehci_hcd 0000:00:1a.7: EHCI Host Controller Oct 1 21:14:14 Hilbert kernel: [ 0.694745] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 Oct 1 21:14:14 Hilbert kernel: [ 0.694781] ehci_hcd 0000:00:1a.7: debug port 1 Oct 1 21:14:14 Hilbert kernel: [ 0.698664] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported Oct 1 21:14:14 Hilbert kernel: [ 0.698682] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 Oct 1 21:14:14 Hilbert kernel: [ 0.720018] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 Oct 1 21:14:14 Hilbert kernel: [ 0.720126] hub 1-0:1.0: USB hub found Oct 1 21:14:14 Hilbert kernel: [ 0.720131] hub 1-0:1.0: 4 ports detected Oct 1 21:14:14 Hilbert kernel: [ 0.720202] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Oct 1 21:14:14 Hilbert kernel: [ 0.720215] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Oct 1 21:14:14 Hilbert kernel: [ 0.720219] ehci_hcd 0000:00:1d.7: EHCI Host Controller Oct 1 21:14:14 Hilbert kernel: [ 0.720257] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 Oct 1 21:14:14 Hilbert kernel: [ 0.720289] ehci_hcd 0000:00:1d.7: debug port 1 Oct 1 21:14:14 Hilbert kernel: [ 0.724177] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported Oct 1 21:14:14 Hilbert kernel: [ 0.724191] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 Oct 1 21:14:14 Hilbert kernel: [ 0.740015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Oct 1 21:14:14 Hilbert kernel: [ 0.740126] hub 2-0:1.0: USB hub found Oct 1 21:14:14 Hilbert kernel: [ 0.740130] hub 2-0:1.0: 6 ports detected Oct 1 21:14:14 Hilbert kernel: [ 0.740209] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Oct 1 21:14:14 Hilbert kernel: [ 0.740221] uhci_hcd: USB Universal Host Controller Interface driver Oct 1 21:14:14 Hilbert kernel: [ 0.740244] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Oct 1 21:14:14 Hilbert kernel: [ 0.740251] uhci_hcd 0000:00:1a.0: setting latency timer to 64 Oct 1 21:14:14 Hilbert kernel: [ 0.740255] uhci_hcd 0000:00:1a.0: UHCI Host Controller Oct 1 21:14:14 Hilbert kernel: [ 0.740285] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 Oct 1 21:14:14 Hilbert kernel: [ 0.740314] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 Oct 1 21:14:14 Hilbert kernel: [ 0.740424] hub 3-0:1.0: USB hub found Oct 1 21:14:14 Hilbert kernel: [ 0.740429] hub 3-0:1.0: 2 ports detected Oct 1 21:14:14 Hilbert kernel: [ 0.740496] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 Oct 1 21:14:14 Hilbert kernel: [ 0.740503] uhci_hcd 0000:00:1a.1: setting latency timer to 64 Oct 1 21:14:14 Hilbert kernel: [ 0.740506] uhci_hcd 0000:00:1a.1: UHCI Host Controller Oct 1 21:14:14 Hilbert kernel: [ 0.740547] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 Oct 1 21:14:14 Hilbert kernel: [ 0.740587] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 Oct 1 21:14:14 Hilbert kernel: [ 0.740699] hub 4-0:1.0: USB hub found Oct 1 21:14:14 Hilbert kernel: [ 0.740703] hub 4-0:1.0: 2 ports detected Oct 1 21:14:14 Hilbert kernel: [ 0.740765] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Oct 1 21:14:14 Hilbert kernel: [ 0.740771] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Oct 1 21:14:14 Hilbert kernel: [ 0.740775] uhci_hcd 0000:00:1d.0: UHCI Host Controller Oct 1 21:14:14 Hilbert kernel: [ 0.740807] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 Oct 1 21:14:14 Hilbert kernel: [ 0.740836] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 Oct 1 21:14:14 Hilbert kernel: [ 0.740950] hub 5-0:1.0: USB hub found Oct 1 21:14:14 Hilbert kernel: [ 0.740954] hub 5-0:1.0: 2 ports detected Oct 1 21:14:14 Hilbert kernel: [ 0.741016] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 Oct 1 21:14:14 Hilbert kernel: [ 0.741023] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Oct 1 21:14:14 Hilbert kernel: [ 0.741026] uhci_hcd 0000:00:1d.1: UHCI Host Controller Oct 1 21:14:14 Hilbert kernel: [ 0.741056] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 Oct 1 21:14:14 Hilbert kernel: [ 0.741085] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 Oct 1 21:14:14 Hilbert kernel: [ 0.741198] hub 6-0:1.0: USB hub found Oct 1 21:14:14 Hilbert kernel: [ 0.741204] hub 6-0:1.0: 2 ports detected Oct 1 21:14:14 Hilbert kernel: [ 0.741265] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 Oct 1 21:14:14 Hilbert kernel: [ 0.741271] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Oct 1 21:14:14 Hilbert kernel: [ 0.741275] uhci_hcd 0000:00:1d.2: UHCI Host Controller Oct 1 21:14:14 Hilbert kernel: [ 0.741311] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 Oct 1 21:14:14 Hilbert kernel: [ 0.741341] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 Oct 1 21:14:14 Hilbert kernel: [ 0.741449] hub 7-0:1.0: USB hub found Oct 1 21:14:14 Hilbert kernel: [ 0.741453] hub 7-0:1.0: 2 ports detected Oct 1 21:14:14 Hilbert kernel: [ 0.741557] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 Oct 1 21:14:14 Hilbert kernel: [ 0.744305] serio: i8042 KBD port at 0x60,0x64 irq 1 Oct 1 21:14:14 Hilbert kernel: [ 0.744312] serio: i8042 AUX port at 0x60,0x64 irq 12 Oct 1 21:14:14 Hilbert kernel: [ 0.744416] mousedev: PS/2 mouse device common for all mice Oct 1 21:14:14 Hilbert kernel: [ 0.744558] rtc_cmos 00:03: RTC can wake from S4 Oct 1 21:14:14 Hilbert kernel: [ 0.744684] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 Oct 1 21:14:14 Hilbert kernel: [ 0.744716] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs Oct 1 21:14:14 Hilbert kernel: [ 0.744819] device-mapper: uevent: version 1.0.3 Oct 1 21:14:14 Hilbert kernel: [ 0.744887] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com Oct 1 21:14:14 Hilbert kernel: [ 0.744951] cpuidle: using governor ladder Oct 1 21:14:14 Hilbert kernel: [ 0.745035] cpuidle: using governor menu Oct 1 21:14:14 Hilbert kernel: [ 0.745037] EFI Variables Facility v0.08 2004-May-17 Oct 1 21:14:14 Hilbert kernel: [ 0.745285] TCP cubic registered Oct 1 21:14:14 Hilbert kernel: [ 0.745407] NET: Registered protocol family 10 Oct 1 21:14:14 Hilbert kernel: [ 0.745868] NET: Registered protocol family 17 Oct 1 21:14:14 Hilbert kernel: [ 0.745884] Registering the dns_resolver key type Oct 1 21:14:14 Hilbert kernel: [ 0.745971] PM: Hibernation image not present or could not be loaded. Oct 1 21:14:14 Hilbert kernel: [ 0.745985] registered taskstats version 1 Oct 1 21:14:14 Hilbert kernel: [ 0.753408] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 Oct 1 21:14:14 Hilbert kernel: [ 0.758996] Magic number: 15:282:242 Oct 1 21:14:14 Hilbert kernel: [ 0.759119] rtc_cmos 00:03: setting system clock to 2011-10-01 19:14:04 UTC (1317496444) Oct 1 21:14:14 Hilbert kernel: [ 0.761579] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found Oct 1 21:14:14 Hilbert kernel: [ 0.761581] EDD information not available. Oct 1 21:14:14 Hilbert kernel: [ 0.890531] ata1.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, D200, max UDMA/33 Oct 1 21:14:14 Hilbert kernel: [ 0.930419] ata1.00: configured for UDMA/33 Oct 1 21:14:14 Hilbert kernel: [ 0.938111] scsi 0:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632H D200 PQ: 0 ANSI: 5 Oct 1 21:14:14 Hilbert kernel: [ 0.945218] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Oct 1 21:14:14 Hilbert kernel: [ 0.945221] cdrom: Uniform CD-ROM driver Revision: 3.20 Oct 1 21:14:14 Hilbert kernel: [ 0.945322] sr 0:0:0:0: Attached scsi CD-ROM sr0 Oct 1 21:14:14 Hilbert kernel: [ 0.945380] sr 0:0:0:0: Attached scsi generic sg0 type 5 Oct 1 21:14:14 Hilbert kernel: [ 0.947106] Freeing unused kernel memory: 984k freed Oct 1 21:14:14 Hilbert kernel: [ 0.947417] Write protecting the kernel read-only data: 10240k Oct 1 21:14:14 Hilbert kernel: [ 0.947687] Freeing unused kernel memory: 20k freed Oct 1 21:14:14 Hilbert kernel: [ 0.952238] Freeing unused kernel memory: 1400k freed Oct 1 21:14:14 Hilbert kernel: [ 1.034720] ahci 0000:00:1f.2: version 3.0 Oct 1 21:14:14 Hilbert kernel: [ 1.034738] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Oct 1 21:14:14 Hilbert kernel: [ 1.034802] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X Oct 1 21:14:14 Hilbert kernel: [ 1.034875] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode Oct 1 21:14:14 Hilbert kernel: [ 1.034879] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems Oct 1 21:14:14 Hilbert kernel: [ 1.034885] ahci 0000:00:1f.2: setting latency timer to 64 Oct 1 21:14:14 Hilbert kernel: [ 1.047550] sdhci: Secure Digital Host Controller Interface driver Oct 1 21:14:14 Hilbert kernel: [ 1.047553] sdhci: Copyright(c) Pierre Ossman Oct 1 21:14:14 Hilbert kernel: [ 1.048027] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22) Oct 1 21:14:14 Hilbert kernel: [ 1.048053] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 Oct 1 21:14:14 Hilbert kernel: [ 1.049207] mmc0: no vmmc regulator found Oct 1 21:14:14 Hilbert kernel: [ 1.051859] Registered led device: mmc0:: Oct 1 21:14:14 Hilbert kernel: [ 1.053027] scsi2 : ahci Oct 1 21:14:14 Hilbert kernel: [ 1.054116] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA Oct 1 21:14:14 Hilbert kernel: [ 1.054380] scsi3 : ahci Oct 1 21:14:14 Hilbert kernel: [ 1.058454] scsi4 : ahci Oct 1 21:14:14 Hilbert kernel: [ 1.058624] ata3: SATA max UDMA/133 abar m2048@0xfebfb800 port 0xfebfb900 irq 44 Oct 1 21:14:14 Hilbert kernel: [ 1.058627] ata4: DUMMY Oct 1 21:14:14 Hilbert kernel: [ 1.058631] ata5: SATA max UDMA/133 abar m2048@0xfebfb800 port 0xfebfba00 irq 44 Oct 1 21:14:14 Hilbert kernel: [ 1.160141] usb 2-6: new high speed USB device number 2 using ehci_hcd Oct 1 21:14:14 Hilbert kernel: [ 1.400188] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 1 21:14:14 Hilbert kernel: [ 1.401455] ata3.00: ATA-7: ST9200420AS, 3.ADC, max UDMA/133 Oct 1 21:14:14 Hilbert kernel: [ 1.401460] ata3.00: 390721968 sectors, multi 8: LBA48 NCQ (depth 31/32) Oct 1 21:14:14 Hilbert kernel: [ 1.402985] ata3.00: configured for UDMA/133 Oct 1 21:14:14 Hilbert kernel: [ 1.403182] scsi 2:0:0:0: Direct-Access ATA ST9200420AS 3.AD PQ: 0 ANSI: 5 Oct 1 21:14:14 Hilbert kernel: [ 1.403319] sd 2:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB) Oct 1 21:14:14 Hilbert kernel: [ 1.403344] sd 2:0:0:0: Attached scsi generic sg1 type 0 Oct 1 21:14:14 Hilbert kernel: [ 1.403367] sd 2:0:0:0: [sda] Write Protect is off Oct 1 21:14:14 Hilbert kernel: [ 1.403370] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 Oct 1 21:14:14 Hilbert kernel: [ 1.403392] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 1 21:14:14 Hilbert kernel: [ 1.410067] ata5: SATA link down (SStatus 0 SControl 300) Oct 1 21:14:14 Hilbert kernel: [ 1.438125] sda: sda1 sda2 sda3 < sda5 > Oct 1 21:14:14 Hilbert kernel: [ 1.438523] sd 2:0:0:0: [sda] Attached SCSI disk Oct 1 21:14:14 Hilbert kernel: [ 1.438986] b44 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Oct 1 21:14:14 Hilbert kernel: [ 1.470160] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) Oct 1 21:14:14 Hilbert kernel: [ 1.470172] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) Oct 1 21:14:14 Hilbert kernel: [ 1.470181] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) Oct 1 21:14:14 Hilbert kernel: [ 1.550151] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 Oct 1 21:14:14 Hilbert kernel: [ 1.550187] b44: b44.c:v2.0 Oct 1 21:14:14 Hilbert kernel: [ 1.550247] firewire_ohci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 Oct 1 21:14:14 Hilbert kernel: [ 1.590067] usb 3-2: new full speed USB device number 2 using uhci_hcd Oct 1 21:14:14 Hilbert kernel: [ 1.590770] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:1d:09:a8:97:4c Oct 1 21:14:14 Hilbert kernel: [ 1.630202] firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1 Oct 1 21:14:14 Hilbert kernel: [ 1.782481] hub 3-2:1.0: USB hub found Oct 1 21:14:14 Hilbert kernel: [ 1.784417] hub 3-2:1.0: 3 ports detected Oct 1 21:14:14 Hilbert kernel: [ 2.019193] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) Oct 1 21:14:14 Hilbert kernel: [ 2.061439] usb 3-2.1: new full speed USB device number 3 using uhci_hcd Oct 1 21:14:14 Hilbert kernel: [ 2.130359] firewire_core: created device fw0: GUID 484fc000188ba470, S400 Oct 1 21:14:14 Hilbert kernel: [ 2.271443] usb 3-2.2: new full speed USB device number 4 using uhci_hcd Oct 1 21:14:14 Hilbert kernel: [ 2.491445] usb 3-2.3: new full speed USB device number 5 using uhci_hcd Oct 1 21:14:14 Hilbert kernel: [ 4.031243] Adding 1950716k swap on /dev/sda5. Priority:-1 extents:1 across:1950716k Oct 1 21:14:14 Hilbert kernel: [ 4.784554] lp: driver loaded but no devices found Oct 1 21:14:14 Hilbert kernel: [ 5.161345] wmi: Mapper loaded Oct 1 21:14:14 Hilbert kernel: [ 5.227294] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) Oct 1 21:14:14 Hilbert kernel: [ 5.303976] acpi device:31: registered as cooling_device2 Oct 1 21:14:14 Hilbert kernel: [ 5.304514] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2e/LNXVIDEO:00/input/input4 Oct 1 21:14:14 Hilbert kernel: [ 5.304632] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) Oct 1 21:14:14 Hilbert kernel: [ 5.304674] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. Oct 1 21:14:14 Hilbert kernel: [ 5.512468] input: Dell WMI hotkeys as /devices/virtual/input/input5 Oct 1 21:14:14 Hilbert kernel: [ 5.651747] Bluetooth: Core ver 2.16 Oct 1 21:14:14 Hilbert kernel: [ 5.651889] NET: Registered protocol family 31 Oct 1 21:14:14 Hilbert kernel: [ 5.651891] Bluetooth: HCI device and connection manager initialized Oct 1 21:14:14 Hilbert kernel: [ 5.651894] Bluetooth: HCI socket layer initialized Oct 1 21:14:14 Hilbert kernel: [ 5.651896] Bluetooth: L2CAP socket layer initialized Oct 1 21:14:14 Hilbert kernel: [ 5.652453] Bluetooth: SCO socket layer initialized Oct 1 21:14:14 Hilbert kernel: [ 5.694030] Bluetooth: Generic Bluetooth USB driver ver 0.6 Oct 1 21:14:14 Hilbert kernel: [ 5.694471] usbcore: registered new interface driver btusb Oct 1 21:14:14 Hilbert kernel: [ 5.843370] cfg80211: Calling CRDA to update world regulatory domain Oct 1 21:14:14 Hilbert kernel: [ 6.049548] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04793/0x300000/0x0 Oct 1 21:14:14 Hilbert kernel: [ 6.049558] serio: Synaptics pass-through port at isa0060/serio1/input0 Oct 1 21:14:14 Hilbert kernel: [ 6.085021] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 Oct 1 21:14:14 Hilbert kernel: [ 6.392226] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s Oct 1 21:14:14 Hilbert kernel: [ 6.392230] iwl3945: Copyright(c) 2003-2011 Intel Corporation Oct 1 21:14:14 Hilbert kernel: [ 6.392306] iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Oct 1 21:14:14 Hilbert kernel: [ 6.392321] iwl3945 0000:0c:00.0: setting latency timer to 64 Oct 1 21:14:14 Hilbert kernel: [ 6.440049] r852 0000:03:01.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 Oct 1 21:14:14 Hilbert kernel: [ 6.440571] r852: driver loaded successfully Oct 1 21:14:14 Hilbert kernel: [ 6.447623] iwl3945 0000:0c:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels Oct 1 21:14:14 Hilbert kernel: [ 6.447626] iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG Oct 1 21:14:14 Hilbert kernel: [ 6.447777] iwl3945 0000:0c:00.0: irq 45 for MSI/MSI-X Oct 1 21:14:14 Hilbert kernel: [ 6.447986] Registered led device: phy0-led Oct 1 21:14:14 Hilbert kernel: [ 6.448039] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain Oct 1 21:14:14 Hilbert kernel: [ 6.791941] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input7 Oct 1 21:14:14 Hilbert kernel: [ 6.792041] generic-usb 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0 Oct 1 21:14:14 Hilbert kernel: [ 6.797015] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input8 Oct 1 21:14:14 Hilbert kernel: [ 6.797102] generic-usb 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0 Oct 1 21:14:14 Hilbert kernel: [ 6.797116] usbcore: registered new interface driver usbhid Oct 1 21:14:14 Hilbert kernel: [ 6.797118] usbhid: USB HID core driver Oct 1 21:14:14 Hilbert kernel: [ 6.804872] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs' Oct 1 21:14:14 Hilbert kernel: [ 6.985561] type=1400 audit(1317496450.717:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=530 comm="apparmor_parser" Oct 1 21:14:14 Hilbert kernel: [ 6.985572] type=1400 audit(1317496450.717:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=583 comm="apparmor_parser" Oct 1 21:14:14 Hilbert kernel: [ 6.985830] type=1400 audit(1317496450.717:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=583 comm="apparmor_parser" Oct 1 21:14:14 Hilbert kernel: [ 6.985849] type=1400 audit(1317496450.717:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=530 comm="apparmor_parser" Oct 1 21:14:14 Hilbert kernel: [ 6.985997] type=1400 audit(1317496450.717:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=583 comm="apparmor_parser" Oct 1 21:14:14 Hilbert kernel: [ 6.986035] type=1400 audit(1317496450.717:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=530 comm="apparmor_parser" Oct 1 21:14:14 Hilbert kernel: [ 6.986452] type=1400 audit(1317496450.717:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=740 comm="apparmor_parser" Oct 1 21:14:14 Hilbert kernel: [ 6.986703] type=1400 audit(1317496450.717:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=740 comm="apparmor_parser" Oct 1 21:14:14 Hilbert kernel: [ 6.986869] type=1400 audit(1317496450.717:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=740 comm="apparmor_parser" Oct 1 21:14:14 Hilbert kernel: [ 7.009587] Linux video capture interface: v2.00 Oct 1 21:14:14 Hilbert kernel: [ 7.068416] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain Oct 1 21:14:14 Hilbert kernel: [ 7.068420] cfg80211: World regulatory domain updated: Oct 1 21:14:14 Hilbert kernel: [ 7.068422] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Oct 1 21:14:14 Hilbert kernel: [ 7.068425] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 1 21:14:14 Hilbert kernel: [ 7.068428] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 1 21:14:14 Hilbert kernel: [ 7.068431] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 1 21:14:14 Hilbert kernel: [ 7.068433] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 1 21:14:14 Hilbert kernel: [ 7.068436] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 1 21:14:14 Hilbert kernel: [ 7.088410] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640) Oct 1 21:14:14 Hilbert kernel: [ 7.088974] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. Oct 1 21:14:14 Hilbert kernel: [ 7.089638] input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input9 Oct 1 21:14:14 Hilbert kernel: [ 7.089754] usbcore: registered new interface driver uvcvideo Oct 1 21:14:14 Hilbert kernel: [ 7.089758] USB Video Class driver (v1.1.0) Oct 1 21:14:14 Hilbert kernel: [ 7.546194] nvidia: module license 'NVIDIA' taints kernel. Oct 1 21:14:14 Hilbert kernel: [ 7.546200] Disabling lock debugging due to kernel taint Oct 1 21:14:14 Hilbert kernel: [ 8.309900] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Oct 1 21:14:14 Hilbert kernel: [ 8.309911] nvidia 0000:01:00.0: setting latency timer to 64 Oct 1 21:14:14 Hilbert kernel: [ 8.309917] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem Oct 1 21:14:14 Hilbert kernel: [ 8.310072] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 280.13 Wed Jul 27 16:53:56 PDT 2011 Oct 1 21:14:14 Hilbert kernel: [ 8.641184] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 Oct 1 21:14:14 Hilbert kernel: [ 8.641816] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X Oct 1 21:14:14 Hilbert kernel: [ 8.641853] HDA Intel 0000:00:1b.0: setting latency timer to 64 Oct 1 21:14:14 Hilbert kernel: [ 8.840560] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 Oct 1 21:14:14 Hilbert kernel: [ 8.840665] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 Oct 1 21:14:14 Hilbert kernel: [ 9.870918] init: udev-fallback-graphics main process (855) terminated with status 1 Oct 1 21:14:14 Hilbert kernel: [ 10.057507] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro Oct 1 21:14:14 Hilbert kernel: [ 10.458841] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) Oct 1 21:14:15 Hilbert kernel: [ 11.620450] type=1400 audit(1317496455.357:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=932 comm="apparmor_parser" Oct 1 21:14:15 Hilbert kernel: [ 12.011579] ppdev: user-space parallel port driver Oct 1 21:14:15 Hilbert kernel: [ 12.057354] audit_printk_skb: 24 callbacks suppressed Oct 1 21:14:15 Hilbert kernel: [ 12.057358] type=1400 audit(1317496455.787:20): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=933 comm="apparmor_parser" Oct 1 21:14:15 Hilbert kernel: [ 12.060525] type=1400 audit(1317496455.797:21): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=933 comm="apparmor_parser" Oct 1 21:14:15 Hilbert kernel: [ 12.062305] type=1400 audit(1317496455.797:22): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=933 comm="apparmor_parser" Oct 1 21:14:15 Hilbert modem-manager[946]: ModemManager (version 0.5) starting... Oct 1 21:14:15 Hilbert modem-manager[946]: Loaded plugin Gobi Oct 1 21:14:15 Hilbert modem-manager[946]: Loaded plugin MotoC Oct 1 21:14:15 Hilbert modem-manager[946]: Loaded plugin Huawei Oct 1 21:14:16 Hilbert modem-manager[946]: Loaded plugin Linktop Oct 1 21:14:16 Hilbert modem-manager[946]: Loaded plugin Nokia Oct 1 21:14:16 Hilbert modem-manager[946]: Loaded plugin ZTE Oct 1 21:14:16 Hilbert modem-manager[946]: Loaded plugin SimTech Oct 1 21:14:16 Hilbert modem-manager[946]: Loaded plugin Option Oct 1 21:14:16 Hilbert modem-manager[946]: Loaded plugin Longcheer Oct 1 21:14:16 Hilbert modem-manager[946]: Loaded plugin Ericsson MBM Oct 1 21:14:16 Hilbert modem-manager[946]: Loaded plugin Option High-Speed Oct 1 21:14:16 Hilbert modem-manager[946]: Loaded plugin X22X Oct 1 21:14:16 Hilbert modem-manager[946]: Loaded plugin Generic Oct 1 21:14:16 Hilbert modem-manager[946]: Loaded plugin Novatel Oct 1 21:14:16 Hilbert modem-manager[946]: Loaded plugin Samsung Oct 1 21:14:16 Hilbert modem-manager[946]: Loaded plugin Sierra Oct 1 21:14:16 Hilbert modem-manager[946]: Loaded plugin AnyData Oct 1 21:14:16 Hilbert NetworkManager[968]: NetworkManager (version 0.9.1.90) is starting... Oct 1 21:14:16 Hilbert NetworkManager[968]: Read config file /etc/NetworkManager/NetworkManager.conf Oct 1 21:14:16 Hilbert modem-manager[946]: Loaded plugin Wavecom Oct 1 21:14:16 Hilbert kernel: [ 12.476930] type=1400 audit(1317496456.207:23): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=975 comm="apparmor_parser" Oct 1 21:14:16 Hilbert kernel: [ 12.477288] type=1400 audit(1317496456.207:24): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=975 comm="apparmor_parser" Oct 1 21:14:16 Hilbert NetworkManager[968]: VPN: loaded org.freedesktop.NetworkManager.pptp Oct 1 21:14:16 Hilbert NetworkManager[968]: SCPlugin-Ifupdown: init! Oct 1 21:14:16 Hilbert NetworkManager[968]: SCPlugin-Ifupdown: update_system_hostname Oct 1 21:14:16 Hilbert NetworkManager[968]: SCPluginIfupdown: management mode: unmanaged Oct 1 21:14:16 Hilbert NetworkManager[968]: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/net/wlan0, iface: wlan0) Oct 1 21:14:16 Hilbert NetworkManager[968]: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/net/wlan0, iface: wlan0): no ifupdown configuration found. Oct 1 21:14:16 Hilbert NetworkManager[968]: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1e.0/0000:03:00.0/ssb0:0/net/eth0, iface: eth0) Oct 1 21:14:16 Hilbert NetworkManager[968]: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1e.0/0000:03:00.0/ssb0:0/net/eth0, iface: eth0): no ifupdown configuration found. Oct 1 21:14:16 Hilbert NetworkManager[968]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo) Oct 1 21:14:16 Hilbert NetworkManager[968]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found. Oct 1 21:14:16 Hilbert NetworkManager[968]: SCPlugin-Ifupdown: end _init. Oct 1 21:14:16 Hilbert NetworkManager[968]: Loaded plugin ifupdown: (C) 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list. Oct 1 21:14:16 Hilbert NetworkManager[968]: Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list. Oct 1 21:14:16 Hilbert NetworkManager[968]: Ifupdown: get unmanaged devices count: 0 Oct 1 21:14:16 Hilbert NetworkManager[968]: SCPlugin-Ifupdown: (26290992) ... get_connections. Oct 1 21:14:16 Hilbert NetworkManager[968]: SCPlugin-Ifupdown: (26290992) ... get_connections (managed=false): return empty list. Oct 1 21:14:17 Hilbert NetworkManager[968]: keyfile: parsing Condivisa ... Oct 1 21:14:17 Hilbert NetworkManager[968]: keyfile: read connection 'Condivisa' Oct 1 21:14:17 Hilbert NetworkManager[968]: keyfile: parsing Alice-37768910 ... Oct 1 21:14:17 Hilbert NetworkManager[968]: keyfile: read connection 'Alice-37768910' Oct 1 21:14:17 Hilbert NetworkManager[968]: keyfile: parsing Cavo ... Oct 1 21:14:17 Hilbert NetworkManager[968]: keyfile: read connection 'Cavo' Oct 1 21:14:17 Hilbert NetworkManager[968]: Ifupdown: get unmanaged devices count: 0 Oct 1 21:14:17 Hilbert NetworkManager[968]: modem-manager is now available Oct 1 21:14:17 Hilbert NetworkManager[968]: monitoring kernel firmware directory '/lib/firmware'. Oct 1 21:14:17 Hilbert NetworkManager[968]: found WiFi radio killswitch rfkill3 (at /sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/ieee80211/phy0/rfkill3) (driver (unknown)) Oct 1 21:14:17 Hilbert NetworkManager[968]: found WiFi radio killswitch rfkill0 (at /sys/devices/platform/dell-laptop/rfkill/rfkill0) (driver dell-laptop) Oct 1 21:14:17 Hilbert NetworkManager[968]: WiFi enabled by radio killswitch; enabled by state file Oct 1 21:14:17 Hilbert NetworkManager[968]: WWAN enabled by radio killswitch; enabled by state file Oct 1 21:14:17 Hilbert NetworkManager[968]: WiMAX enabled by radio killswitch; enabled by state file Oct 1 21:14:17 Hilbert NetworkManager[968]: Networking is enabled by state file Oct 1 21:14:17 Hilbert NetworkManager[968]: (wlan0): driver supports SSID scans (scan_capa 0x01). Oct 1 21:14:17 Hilbert NetworkManager[968]: (wlan0): new 802.11 WiFi device (driver: 'iwl3945' ifindex: 3) Oct 1 21:14:17 Hilbert NetworkManager[968]: (wlan0): exported as /org/freedesktop/NetworkManager/Devices/0 Oct 1 21:14:17 Hilbert NetworkManager[968]: (wlan0): now managed Oct 1 21:14:17 Hilbert NetworkManager[968]: (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Oct 1 21:14:17 Hilbert NetworkManager[968]: (wlan0): bringing up device. Oct 1 21:14:17 Hilbert kernel: [ 13.516686] iwl3945 0000:0c:00.0: loaded firmware version 15.32.2.9 Oct 1 21:14:17 Hilbert NetworkManager[968]: (wlan0): preparing device. Oct 1 21:14:17 Hilbert NetworkManager[968]: (wlan0): deactivating device (reason 'managed') [2] Oct 1 21:14:17 Hilbert NetworkManager[968]: (eth0): carrier is OFF Oct 1 21:14:17 Hilbert NetworkManager[968]: (eth0): new Ethernet device (driver: 'b44' ifindex: 2) Oct 1 21:14:17 Hilbert NetworkManager[968]: (eth0): exported as /org/freedesktop/NetworkManager/Devices/1 Oct 1 21:14:17 Hilbert kernel: [ 13.592105] ADDRCONF(NETDEV_UP): wlan0: link is not ready Oct 1 21:14:17 Hilbert NetworkManager[968]: (eth0): now managed Oct 1 21:14:17 Hilbert NetworkManager[968]: (eth0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Oct 1 21:14:17 Hilbert NetworkManager[968]: (eth0): bringing up device. Oct 1 21:14:17 Hilbert NetworkManager[968]: (eth0): preparing device. Oct 1 21:14:17 Hilbert NetworkManager[968]: (eth0): deactivating device (reason 'managed') [2] Oct 1 21:14:17 Hilbert kernel: [ 13.608077] ADDRCONF(NETDEV_UP): eth0: link is not ready Oct 1 21:14:17 Hilbert NetworkManager[968]: bluez error getting default adapter: The name org.bluez was not provided by any .service files Oct 1 21:14:18 Hilbert NetworkManager[968]: wpa_supplicant started Oct 1 21:14:18 Hilbert NetworkManager[968]: (wlan0): supplicant interface state: starting -> ready Oct 1 21:14:18 Hilbert NetworkManager[968]: (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42] Oct 1 21:14:18 Hilbert NetworkManager[968]: (wlan0): supplicant interface state: ready -> inactive Oct 1 21:14:21 Hilbert kernel: [ 17.628464] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Oct 1 21:14:21 Hilbert kernel: [ 17.628467] Bluetooth: BNEP filters: protocol multicast Oct 1 21:14:21 Hilbert NetworkManager[968]: bluez error getting default adapter: No such adapter Oct 1 21:14:21 Hilbert kernel: [ 17.656195] Bluetooth: RFCOMM TTY layer initialized Oct 1 21:14:21 Hilbert kernel: [ 17.656200] Bluetooth: RFCOMM socket layer initialized Oct 1 21:14:21 Hilbert kernel: [ 17.656202] Bluetooth: RFCOMM ver 1.11 Oct 1 21:14:22 Hilbert kernel: [ 18.866544] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600 Oct 1 21:14:22 Hilbert kernel: [ 18.950678] EXT4-fs (sda2): re-mounted. Opts: commit=600 Oct 1 21:14:22 Hilbert NetworkManager[968]: Auto-activating connection 'Alice-37768910'. Oct 1 21:14:22 Hilbert NetworkManager[968]: Activation (wlan0) starting connection 'Alice-37768910' Oct 1 21:14:22 Hilbert NetworkManager[968]: (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0] Oct 1 21:14:22 Hilbert NetworkManager[968]: Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled... Oct 1 21:14:22 Hilbert NetworkManager[968]: Activation (wlan0) Stage 1 of 5 (Device Prepare) started... Oct 1 21:14:22 Hilbert NetworkManager[968]: Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled... Oct 1 21:14:22 Hilbert NetworkManager[968]: Activation (wlan0) Stage 1 of 5 (Device Prepare) complete. Oct 1 21:14:22 Hilbert NetworkManager[968]: Activation (wlan0) Stage 2 of 5 (Device Configure) starting... Oct 1 21:14:22 Hilbert NetworkManager[968]: (wlan0): device state change: prepare -> config (reason 'none') [40 50 0] Oct 1 21:14:22 Hilbert NetworkManager[968]: Activation (wlan0/wireless): connection 'Alice-37768910' has security, and secrets exist. No new secrets needed. Oct 1 21:14:22 Hilbert NetworkManager[968]: Config: added 'ssid' value 'Alice-37768910' Oct 1 21:14:22 Hilbert NetworkManager[968]: Config: added 'scan_ssid' value '1' Oct 1 21:14:22 Hilbert NetworkManager[968]: Config: added 'key_mgmt' value 'WPA-PSK' Oct 1 21:14:22 Hilbert NetworkManager[968]: Config: added 'psk' value '' Oct 1 21:14:22 Hilbert NetworkManager[968]: Activation (wlan0) Stage 2 of 5 (Device Configure) complete. Oct 1 21:14:22 Hilbert NetworkManager[968]: Config: set interface ap_scan to 1 Oct 1 21:14:22 Hilbert NetworkManager[968]: (wlan0): supplicant interface state: inactive -> scanning Oct 1 21:14:26 Hilbert wpa_supplicant[1021]: Trying to authenticate with 00:23:8e:4b:11:70 (SSID='Alice-37768910' freq=2412 MHz) Oct 1 21:14:26 Hilbert wpa_supplicant[1021]: Trying to associate with 00:23:8e:4b:11:70 (SSID='Alice-37768910' freq=2412 MHz) Oct 1 21:14:26 Hilbert NetworkManager[968]: (wlan0): supplicant interface state: scanning -> associating Oct 1 21:14:26 Hilbert wpa_supplicant[1021]: Associated with 00:23:8e:4b:11:70 Oct 1 21:14:26 Hilbert kernel: [ 22.942355] wlan0: authenticate with 00:23:8e:4b:11:70 (try 1) Oct 1 21:14:26 Hilbert kernel: [ 22.944202] wlan0: authenticated Oct 1 21:14:26 Hilbert kernel: [ 22.944393] wlan0: associate with 00:23:8e:4b:11:70 (try 1) Oct 1 21:14:26 Hilbert kernel: [ 22.946854] wlan0: RX AssocResp from 00:23:8e:4b:11:70 (capab=0x411 status=0 aid=1) Oct 1 21:14:26 Hilbert kernel: [ 22.946860] wlan0: associated Oct 1 21:14:26 Hilbert kernel: [ 22.948534] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Oct 1 21:14:26 Hilbert NetworkManager[968]: (wlan0): supplicant interface state: associating -> 4-way handshake Oct 1 21:14:26 Hilbert NetworkManager[968]: (wlan0): supplicant interface state: 4-way handshake -> group handshake Oct 1 21:14:26 Hilbert wpa_supplicant[1021]: WPA: Key negotiation completed with 00:23:8e:4b:11:70 [PTK=TKIP GTK=TKIP] Oct 1 21:14:26 Hilbert wpa_supplicant[1021]: CTRL-EVENT-CONNECTED - Connection to 00:23:8e:4b:11:70 completed (auth) [id=0 id_str=] Oct 1 21:14:26 Hilbert NetworkManager[968]: (wlan0): supplicant interface state: group handshake -> completed Oct 1 21:14:26 Hilbert NetworkManager[968]: Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Alice-37768910'. Oct 1 21:14:26 Hilbert NetworkManager[968]: Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled. Oct 1 21:14:26 Hilbert NetworkManager[968]: Activation (wlan0) Stage 3 of 5 (IP Configure Start) started... Oct 1 21:14:26 Hilbert NetworkManager[968]: (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0] Oct 1 21:14:26 Hilbert NetworkManager[968]: Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds) Oct 1 21:14:26 Hilbert NetworkManager[968]: dhclient started with pid 1390 Oct 1 21:14:26 Hilbert NetworkManager[968]: Activation (wlan0) Beginning IP6 addrconf. Oct 1 21:14:26 Hilbert NetworkManager[968]: Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete. Oct 1 21:14:26 Hilbert dhclient: Internet Systems Consortium DHCP Client 4.1.1-P1 Oct 1 21:14:26 Hilbert dhclient: Copyright 2004-2010 Internet Systems Consortium. Oct 1 21:14:26 Hilbert dhclient: All rights reserved. Oct 1 21:14:26 Hilbert dhclient: For info, please visit https://www.isc.org/software/dhcp/ Oct 1 21:14:26 Hilbert dhclient: Oct 1 21:14:27 Hilbert NetworkManager[968]: (wlan0): DHCPv4 state changed nbi -> preinit Oct 1 21:14:27 Hilbert dhclient: Listening on LPF/wlan0/00:1c:bf:61:5f:35 Oct 1 21:14:27 Hilbert dhclient: Sending on LPF/wlan0/00:1c:bf:61:5f:35 Oct 1 21:14:27 Hilbert dhclient: Sending on Socket/fallback Oct 1 21:14:27 Hilbert dhclient: DHCPREQUEST of 192.168.1.170 on wlan0 to 255.255.255.255 port 67 Oct 1 21:14:27 Hilbert dhclient: DHCPNAK from 192.168.1.1 Oct 1 21:14:27 Hilbert NetworkManager[968]: (wlan0): DHCPv4 state changed preinit -> expire Oct 1 21:14:27 Hilbert dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 3 Oct 1 21:14:27 Hilbert NetworkManager[968]: (wlan0): DHCPv4 state changed expire -> preinit Oct 1 21:14:29 Hilbert dhclient: DHCPOFFER of 192.168.1.170 from 192.168.1.1 Oct 1 21:14:29 Hilbert dhclient: DHCPREQUEST of 192.168.1.170 on wlan0 to 255.255.255.255 port 67 Oct 1 21:14:29 Hilbert dhclient: DHCPACK of 192.168.1.170 from 192.168.1.1 Oct 1 21:14:29 Hilbert NetworkManager[968]: (wlan0): DHCPv4 state changed preinit -> bound Oct 1 21:14:29 Hilbert NetworkManager[968]: Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled... Oct 1 21:14:29 Hilbert NetworkManager[968]: Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started... Oct 1 21:14:29 Hilbert NetworkManager[968]: address 192.168.1.170 Oct 1 21:14:29 Hilbert NetworkManager[968]: prefix 24 (255.255.255.0) Oct 1 21:14:29 Hilbert NetworkManager[968]: gateway 192.168.1.1 Oct 1 21:14:29 Hilbert NetworkManager[968]: hostname 'Hilbert' Oct 1 21:14:29 Hilbert NetworkManager[968]: nameserver '192.168.1.1' Oct 1 21:14:29 Hilbert NetworkManager[968]: domain name 'homenet.telecomitalia.it' Oct 1 21:14:29 Hilbert NetworkManager[968]: Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started... Oct 1 21:14:29 Hilbert dhclient: bound to 192.168.1.170 -- renewal in 8726 seconds. Oct 1 21:14:30 Hilbert kernel: [ 26.307083] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600 Oct 1 21:14:30 Hilbert kernel: [ 26.310079] EXT4-fs (sda2): re-mounted. Opts: commit=600 Oct 1 21:14:30 Hilbert NetworkManager[968]: (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0] Oct 1 21:14:30 Hilbert NetworkManager[968]: Policy set 'Alice-37768910' (wlan0) as default for IPv4 routing and DNS. Oct 1 21:14:30 Hilbert NetworkManager[968]: Activation (wlan0) successful, device activated. Oct 1 21:14:30 Hilbert NetworkManager[968]: Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete. Oct 1 21:14:30 Hilbert NetworkManager[968]: Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete. Oct 1 21:14:37 Hilbert kernel: [ 33.680042] wlan0: no IPv6 routers present Oct 1 21:14:46 Hilbert NetworkManager[968]: (wlan0): IP6 addrconf timed out or failed. Oct 1 21:14:46 Hilbert NetworkManager[968]: Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) scheduled... Oct 1 21:14:46 Hilbert NetworkManager[968]: Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) started... Oct 1 21:14:46 Hilbert NetworkManager[968]: Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started... Oct 1 21:14:46 Hilbert NetworkManager[968]: Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete. Oct 1 21:14:46 Hilbert NetworkManager[968]: Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) complete. Oct 1 21:15:04 Hilbert kernel: [ 60.370096] CE: hpet increased min_delta_ns to 20113 nsec Oct 1 21:17:02 Hilbert kernel: Kernel logging (proc) stopped. Oct 1 21:21:13 Hilbert kernel: imklog 5.8.1, log source = /proc/kmsg started. Oct 1 21:21:13 Hilbert kernel: [ 0.000000] Initializing cgroup subsys cpuset Oct 1 21:21:13 Hilbert kernel: [ 0.000000] Initializing cgroup subsys cpu Oct 1 21:21:13 Hilbert kernel: [ 0.000000] Linux version 3.0.0-11-generic (buildd@crested) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu2) ) #18-Ubuntu SMP Tue Sep 13 23:38:01 UTC 2011 (Ubuntu 3.0.0-11.18-generic 3.0.4) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-11-generic root=UUID=c49615ed-88be-4cff-812e-d4389247f03d ro quiet splash vt.handoff=7 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] KERNEL supported cpus: Oct 1 21:21:13 Hilbert kernel: [ 0.000000] Intel GenuineIntel Oct 1 21:21:13 Hilbert kernel: [ 0.000000] AMD AuthenticAMD Oct 1 21:21:13 Hilbert kernel: [ 0.000000] Centaur CentaurHauls Oct 1 21:21:13 Hilbert kernel: [ 0.000000] BIOS-provided physical RAM map: Oct 1 21:21:13 Hilbert kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe6d800 (usable) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] BIOS-e820: 000000007fe6d800 - 0000000080000000 (reserved) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] NX (Execute Disable) protection: active Oct 1 21:21:13 Hilbert kernel: [ 0.000000] DMI 2.4 present. Oct 1 21:21:13 Hilbert kernel: [ 0.000000] DMI: Dell Inc. Inspiron 1520 /0KY768, BIOS A04 11/05/2007 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] No AGP bridge found Oct 1 21:21:13 Hilbert kernel: [ 0.000000] last_pfn = 0x7fe6d max_arch_pfn = 0x400000000 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] MTRR default type: uncachable Oct 1 21:21:13 Hilbert kernel: [ 0.000000] MTRR fixed ranges enabled: Oct 1 21:21:13 Hilbert kernel: [ 0.000000] 00000-9FFFF write-back Oct 1 21:21:13 Hilbert kernel: [ 0.000000] A0000-BFFFF uncachable Oct 1 21:21:13 Hilbert kernel: [ 0.000000] C0000-CFFFF write-protect Oct 1 21:21:13 Hilbert kernel: [ 0.000000] D0000-EFFFF uncachable Oct 1 21:21:13 Hilbert kernel: [ 0.000000] F0000-FFFFF write-protect Oct 1 21:21:13 Hilbert kernel: [ 0.000000] MTRR variable ranges enabled: Oct 1 21:21:13 Hilbert kernel: [ 0.000000] 0 base 000000000 mask F80000000 write-back Oct 1 21:21:13 Hilbert kernel: [ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable Oct 1 21:21:13 Hilbert kernel: [ 0.000000] 2 disabled Oct 1 21:21:13 Hilbert kernel: [ 0.000000] 3 disabled Oct 1 21:21:13 Hilbert kernel: [ 0.000000] 4 disabled Oct 1 21:21:13 Hilbert kernel: [ 0.000000] 5 disabled Oct 1 21:21:13 Hilbert kernel: [ 0.000000] 6 disabled Oct 1 21:21:13 Hilbert kernel: [ 0.000000] 7 disabled Oct 1 21:21:13 Hilbert kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] original variable MTRRs Oct 1 21:21:13 Hilbert kernel: [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB Oct 1 21:21:13 Hilbert kernel: [ 0.000000] reg 1, base: 2047MB, range: 1MB, type UC Oct 1 21:21:13 Hilbert kernel: [ 0.000000] total RAM covered: 2047M Oct 1 21:21:13 Hilbert kernel: [ 0.000000] Found optimal setting for mtrr clean up Oct 1 21:21:13 Hilbert kernel: [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 2 lose cover RAM: 0G Oct 1 21:21:13 Hilbert kernel: [ 0.000000] New variable MTRRs Oct 1 21:21:13 Hilbert kernel: [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB Oct 1 21:21:13 Hilbert kernel: [ 0.000000] reg 1, base: 2047MB, range: 1MB, type UC Oct 1 21:21:13 Hilbert kernel: [ 0.000000] initial memory mapped : 0 - 20000000 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] init_memory_mapping: 0000000000000000-000000007fe6d000 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] 0000000000 - 007fe00000 page 2M Oct 1 21:21:13 Hilbert kernel: [ 0.000000] 007fe00000 - 007fe6d000 page 4k Oct 1 21:21:13 Hilbert kernel: [ 0.000000] kernel direct mapping tables up to 7fe6d000 @ 7fe69000-7fe6d000 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] RAMDISK: 365bc000 - 372d6000 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] ACPI: RSDP 00000000000fbbf0 00024 (v02 DELL ) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] ACPI: XSDT 000000007fe6f200 0005C (v01 DELL M08 27D70B05 ASL 00000061) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] ACPI: FACP 000000007fe6f09c 000F4 (v04 DELL M08 27D70B05 ASL 00000061) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] ACPI: DSDT 000000007fe6f800 0565E (v02 INT430 SYSFexxx 00001001 INTL 20050624) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] ACPI: FACS 000000007fe7e000 00040 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] ACPI: HPET 000000007fe6f300 00038 (v01 DELL M08 00000001 ASL 00000061) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] ACPI: APIC 000000007fe6f400 00068 (v01 DELL M08 27D70B05 ASL 00000047) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] ACPI: MCFG 000000007fe6f3c0 0003E (v16 DELL M08 27D70B05 ASL 00000061) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] ACPI: SLIC 000000007fe6f49c 00176 (v01 DELL M08 27D70B05 ASL 00000061) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] ACPI: BOOT 000000007fe6efc0 00028 (v01 DELL M08 27D70B05 ASL 00000061) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] ACPI: SSDT 000000007fe6d9bc 004CC (v01 PmRef CpuPm 00003000 INTL 20050624) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] No NUMA configuration found Oct 1 21:21:13 Hilbert kernel: [ 0.000000] Faking a node at 0000000000000000-000000007fe6d000 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] Initmem setup node 0 0000000000000000-000000007fe6d000 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] NODE_DATA [000000007fe64000 - 000000007fe68fff] Oct 1 21:21:13 Hilbert kernel: [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] Zone PFN ranges: Oct 1 21:21:13 Hilbert kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] Normal empty Oct 1 21:21:13 Hilbert kernel: [ 0.000000] Movable zone start PFN for each node Oct 1 21:21:13 Hilbert kernel: [ 0.000000] early_node_map[2] active PFN ranges Oct 1 21:21:13 Hilbert kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f Oct 1 21:21:13 Hilbert kernel: [ 0.000000] 0: 0x00000100 -> 0x0007fe6d Oct 1 21:21:13 Hilbert kernel: [ 0.000000] On node 0 totalpages: 523772 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] DMA zone: 56 pages used for memmap Oct 1 21:21:13 Hilbert kernel: [ 0.000000] DMA zone: 5 pages reserved Oct 1 21:21:13 Hilbert kernel: [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] DMA32 zone: 7107 pages used for memmap Oct 1 21:21:13 Hilbert kernel: [ 0.000000] DMA32 zone: 512682 pages, LIFO batch:31 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] ACPI: IRQ0 used by override. Oct 1 21:21:13 Hilbert kernel: [ 0.000000] ACPI: IRQ2 used by override. Oct 1 21:21:13 Hilbert kernel: [ 0.000000] ACPI: IRQ9 used by override. Oct 1 21:21:13 Hilbert kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Oct 1 21:21:13 Hilbert kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs Oct 1 21:21:13 Hilbert kernel: [ 0.000000] nr_irqs_gsi: 40 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:74000000) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware Oct 1 21:21:13 Hilbert kernel: [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007fc00000 s79616 r8192 d22784 u1048576 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] pcpu-alloc: s79616 r8192 d22784 u1048576 alloc=1*2097152 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] pcpu-alloc: [0] 0 1 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516604 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] Policy zone: DMA32 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-11-generic root=UUID=c49615ed-88be-4cff-812e-d4389247f03d ro quiet splash vt.handoff=7 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] Checking aperture... Oct 1 21:21:13 Hilbert kernel: [ 0.000000] No AGP bridge found Oct 1 21:21:13 Hilbert kernel: [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area Oct 1 21:21:13 Hilbert kernel: [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! Oct 1 21:21:13 Hilbert kernel: [ 0.000000] Memory: 2039268k/2095540k available (6104k kernel code, 452k absent, 55820k reserved, 4880k data, 984k init) Oct 1 21:21:13 Hilbert kernel: [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] Hierarchical RCU implementation. Oct 1 21:21:13 Hilbert kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. Oct 1 21:21:13 Hilbert kernel: [ 0.000000] NR_IRQS:16640 nr_irqs:512 16 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] Extended CMOS year: 2000 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] vt handoff: transparent VT on vt#7 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] Console: colour VGA+ 80x25 Oct 1 21:21:13 Hilbert kernel: [ 0.000000] console [tty0] enabled Oct 1 21:21:13 Hilbert kernel: [ 0.000000] allocated 16777216 bytes of page_cgroup Oct 1 21:21:13 Hilbert kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups Oct 1 21:21:13 Hilbert kernel: [ 0.000000] hpet clockevent registered Oct 1 21:21:13 Hilbert kernel: [ 0.000000] Fast TSC calibration using PIT Oct 1 21:21:13 Hilbert kernel: [ 0.000000] Detected 2194.127 MHz processor. Oct 1 21:21:13 Hilbert kernel: [ 0.010005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.25 BogoMIPS (lpj=21941270) Oct 1 21:21:13 Hilbert kernel: [ 0.010010] pid_max: default: 32768 minimum: 301 Oct 1 21:21:13 Hilbert kernel: [ 0.010043] Security Framework initialized Oct 1 21:21:13 Hilbert kernel: [ 0.010063] AppArmor: AppArmor initialized Oct 1 21:21:13 Hilbert kernel: [ 0.010065] Yama: becoming mindful. Oct 1 21:21:13 Hilbert kernel: [ 0.010308] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Oct 1 21:21:13 Hilbert kernel: [ 0.011475] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Oct 1 21:21:13 Hilbert kernel: [ 0.012028] Mount-cache hash table entries: 256 Oct 1 21:21:13 Hilbert kernel: [ 0.012182] Initializing cgroup subsys cpuacct Oct 1 21:21:13 Hilbert kernel: [ 0.012188] Initializing cgroup subsys memory Oct 1 21:21:13 Hilbert kernel: [ 0.012198] Initializing cgroup subsys devices Oct 1 21:21:13 Hilbert kernel: [ 0.012201] Initializing cgroup subsys freezer Oct 1 21:21:13 Hilbert kernel: [ 0.012203] Initializing cgroup subsys net_cls Oct 1 21:21:13 Hilbert kernel: [ 0.012206] Initializing cgroup subsys blkio Oct 1 21:21:13 Hilbert kernel: [ 0.012213] Initializing cgroup subsys perf_event Oct 1 21:21:13 Hilbert kernel: [ 0.012248] CPU: Physical Processor ID: 0 Oct 1 21:21:13 Hilbert kernel: [ 0.012250] CPU: Processor Core ID: 0 Oct 1 21:21:13 Hilbert kernel: [ 0.012253] mce: CPU supports 6 MCE banks Oct 1 21:21:13 Hilbert kernel: [ 0.012262] CPU0: Thermal monitoring enabled (TM2) Oct 1 21:21:13 Hilbert kernel: [ 0.012268] using mwait in idle threads. Oct 1 21:21:13 Hilbert kernel: [ 0.014797] ACPI: Core revision 20110413 Oct 1 21:21:13 Hilbert kernel: [ 0.022437] ftrace: allocating 25651 entries in 101 pages Oct 1 21:21:13 Hilbert kernel: [ 0.030434] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Oct 1 21:21:13 Hilbert kernel: [ 0.133384] CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b Oct 1 21:21:13 Hilbert kernel: [ 0.140000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. Oct 1 21:21:13 Hilbert kernel: [ 0.140000] PEBS disabled due to CPU errata. Oct 1 21:21:13 Hilbert kernel: [ 0.140000] ... version: 2 Oct 1 21:21:13 Hilbert kernel: [ 0.140000] ... bit width: 40 Oct 1 21:21:13 Hilbert kernel: [ 0.140000] ... generic registers: 2 Oct 1 21:21:13 Hilbert kernel: [ 0.140000] ... value mask: 000000ffffffffff Oct 1 21:21:13 Hilbert kernel: [ 0.140000] ... max period: 000000007fffffff Oct 1 21:21:13 Hilbert kernel: [ 0.140000] ... fixed-purpose events: 3 Oct 1 21:21:13 Hilbert kernel: [ 0.140000] ... event mask: 0000000700000003 Oct 1 21:21:13 Hilbert kernel: [ 0.140000] Booting Node 0, Processors #1 Ok. Oct 1 21:21:13 Hilbert kernel: [ 0.140000] smpboot cpu 1: start_ip = 9a000 Oct 1 21:21:13 Hilbert kernel: [ 0.300018] Brought up 2 CPUs Oct 1 21:21:13 Hilbert kernel: [ 0.300022] Total of 2 processors activated (8775.98 BogoMIPS). Oct 1 21:21:13 Hilbert kernel: [ 0.301275] devtmpfs: initialized Oct 1 21:21:13 Hilbert kernel: [ 0.301426] print_constraints: dummy: Oct 1 21:21:13 Hilbert kernel: [ 0.301460] Time: 19:20:57 Date: 10/01/11 Oct 1 21:21:13 Hilbert kernel: [ 0.301496] NET: Registered protocol family 16 Oct 1 21:21:13 Hilbert kernel: [ 0.301526] Trying to unpack rootfs image as initramfs... Oct 1 21:21:13 Hilbert kernel: [ 0.301627] ACPI: bus type pci registered Oct 1 21:21:13 Hilbert kernel: [ 0.301689] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000) Oct 1 21:21:13 Hilbert kernel: [ 0.301692] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820 Oct 1 21:21:13 Hilbert kernel: [ 0.310094] PCI: Using configuration type 1 for base access Oct 1 21:21:13 Hilbert kernel: [ 0.310101] dmi type 0xB1 record - unknown flag Oct 1 21:21:13 Hilbert kernel: [ 0.310947] bio: create slab at 0 Oct 1 21:21:13 Hilbert kernel: [ 0.312159] ACPI: EC: Look up EC in DSDT Oct 1 21:21:13 Hilbert kernel: [ 0.319530] ACPI: SSDT 000000007fe6e4f2 00286 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) Oct 1 21:21:13 Hilbert kernel: [ 0.319799] ACPI: Dynamic OEM Table Load: Oct 1 21:21:13 Hilbert kernel: [ 0.319803] ACPI: SSDT (null) 00286 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) Oct 1 21:21:13 Hilbert kernel: [ 0.319908] ACPI: SSDT 000000007fe6de88 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) Oct 1 21:21:13 Hilbert kernel: [ 0.320190] ACPI: Dynamic OEM Table Load: Oct 1 21:21:13 Hilbert kernel: [ 0.320193] ACPI: SSDT (null) 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) Oct 1 21:21:13 Hilbert kernel: [ 0.320379] ACPI: SSDT 000000007fe6e778 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) Oct 1 21:21:13 Hilbert kernel: [ 0.320640] ACPI: Dynamic OEM Table Load: Oct 1 21:21:13 Hilbert kernel: [ 0.320643] ACPI: SSDT (null) 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) Oct 1 21:21:13 Hilbert kernel: [ 0.320713] ACPI: SSDT 000000007fe6e46d 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) Oct 1 21:21:13 Hilbert kernel: [ 0.320968] ACPI: Dynamic OEM Table Load: Oct 1 21:21:13 Hilbert kernel: [ 0.320971] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) Oct 1 21:21:13 Hilbert kernel: [ 0.321135] ACPI: Interpreter enabled Oct 1 21:21:13 Hilbert kernel: [ 0.321138] ACPI: (supports S0 S3 S4 S5) Oct 1 21:21:13 Hilbert kernel: [ 0.321154] ACPI: Using IOAPIC for interrupt routing Oct 1 21:21:13 Hilbert kernel: [ 0.352327] ACPI: No dock devices found. Oct 1 21:21:13 Hilbert kernel: [ 0.352331] HEST: Table not found. Oct 1 21:21:13 Hilbert kernel: [ 0.352335] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug Oct 1 21:21:13 Hilbert kernel: [ 0.361014] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) Oct 1 21:21:13 Hilbert kernel: [ 0.378347] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) Oct 1 21:21:13 Hilbert kernel: [ 0.378351] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) Oct 1 21:21:13 Hilbert kernel: [ 0.378354] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) Oct 1 21:21:13 Hilbert kernel: [ 0.378356] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) Oct 1 21:21:13 Hilbert kernel: [ 0.378359] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xf3ffffff] (ignored) Oct 1 21:21:13 Hilbert kernel: [ 0.378362] pci_root PNP0A03:00: host bridge window [mem 0xf8000000-0xfebfffff] (ignored) Oct 1 21:21:13 Hilbert kernel: [ 0.378364] pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff] (ignored) Oct 1 21:21:13 Hilbert kernel: [ 0.378367] pci_root PNP0A03:00: host bridge window [mem 0xfed1c000-0xfed1ffff] (ignored) Oct 1 21:21:13 Hilbert kernel: [ 0.378369] pci_root PNP0A03:00: host bridge window [mem 0xfed90000-0xfed9ffff] (ignored) Oct 1 21:21:13 Hilbert kernel: [ 0.378372] pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff] (ignored) Oct 1 21:21:13 Hilbert kernel: [ 0.378375] pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff] (ignored) Oct 1 21:21:13 Hilbert kernel: [ 0.378377] pci_root PNP0A03:00: host bridge window [mem 0xffb00000-0xffefffff] (ignored) Oct 1 21:21:13 Hilbert kernel: [ 0.378392] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600 Oct 1 21:21:13 Hilbert kernel: [ 0.378439] pci 0000:00:01.0: [8086:2a01] type 1 class 0x000604 Oct 1 21:21:13 Hilbert kernel: [ 0.378475] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold Oct 1 21:21:13 Hilbert kernel: [ 0.378479] pci 0000:00:01.0: PME# disabled Oct 1 21:21:13 Hilbert kernel: [ 0.378536] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03 Oct 1 21:21:13 Hilbert kernel: [ 0.378596] pci 0000:00:1a.0: reg 20: [io 0x6f20-0x6f3f] Oct 1 21:21:13 Hilbert kernel: [ 0.378638] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03 Oct 1 21:21:13 Hilbert kernel: [ 0.378696] pci 0000:00:1a.1: reg 20: [io 0x6f00-0x6f1f] Oct 1 21:21:13 Hilbert kernel: [ 0.378754] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03 Oct 1 21:21:13 Hilbert kernel: [ 0.378779] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff] Oct 1 21:21:13 Hilbert kernel: [ 0.378874] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold Oct 1 21:21:13 Hilbert kernel: [ 0.378880] pci 0000:00:1a.7: PME# disabled Oct 1 21:21:13 Hilbert kernel: [ 0.378910] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403 Oct 1 21:21:13 Hilbert kernel: [ 0.378934] pci 0000:00:1b.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit] Oct 1 21:21:13 Hilbert kernel: [ 0.379020] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold Oct 1 21:21:13 Hilbert kernel: [ 0.379025] pci 0000:00:1b.0: PME# disabled Oct 1 21:21:13 Hilbert kernel: [ 0.379055] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604 Oct 1 21:21:13 Hilbert kernel: [ 0.379145] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Oct 1 21:21:13 Hilbert kernel: [ 0.379151] pci 0000:00:1c.0: PME# disabled Oct 1 21:21:13 Hilbert kernel: [ 0.379187] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604 Oct 1 21:21:13 Hilbert kernel: [ 0.379276] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold Oct 1 21:21:13 Hilbert kernel: [ 0.379281] pci 0000:00:1c.1: PME# disabled Oct 1 21:21:13 Hilbert kernel: [ 0.379316] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604 Oct 1 21:21:13 Hilbert kernel: [ 0.379406] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold Oct 1 21:21:13 Hilbert kernel: [ 0.379411] pci 0000:00:1c.3: PME# disabled Oct 1 21:21:13 Hilbert kernel: [ 0.379445] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03 Oct 1 21:21:13 Hilbert kernel: [ 0.379504] pci 0000:00:1d.0: reg 20: [io 0x6f80-0x6f9f] Oct 1 21:21:13 Hilbert kernel: [ 0.379547] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03 Oct 1 21:21:13 Hilbert kernel: [ 0.379606] pci 0000:00:1d.1: reg 20: [io 0x6f60-0x6f7f] Oct 1 21:21:13 Hilbert kernel: [ 0.379649] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03 Oct 1 21:21:13 Hilbert kernel: [ 0.379708] pci 0000:00:1d.2: reg 20: [io 0x6f40-0x6f5f] Oct 1 21:21:13 Hilbert kernel: [ 0.379764] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03 Oct 1 21:21:13 Hilbert kernel: [ 0.379789] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff] Oct 1 21:21:13 Hilbert kernel: [ 0.379884] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold Oct 1 21:21:13 Hilbert kernel: [ 0.379889] pci 0000:00:1d.7: PME# disabled Oct 1 21:21:13 Hilbert kernel: [ 0.379914] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 Oct 1 21:21:13 Hilbert kernel: [ 0.380029] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601 Oct 1 21:21:13 Hilbert kernel: [ 0.380148] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO Oct 1 21:21:13 Hilbert kernel: [ 0.380155] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO Oct 1 21:21:13 Hilbert kernel: [ 0.380160] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) Oct 1 21:21:13 Hilbert kernel: [ 0.380167] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) Oct 1 21:21:13 Hilbert kernel: [ 0.380214] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101 Oct 1 21:21:13 Hilbert kernel: [ 0.380232] pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7] Oct 1 21:21:13 Hilbert kernel: [ 0.380244] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7] Oct 1 21:21:13 Hilbert kernel: [ 0.380257] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177] Oct 1 21:21:13 Hilbert kernel: [ 0.380270] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377] Oct 1 21:21:13 Hilbert kernel: [ 0.380282] pci 0000:00:1f.1: reg 20: [io 0x6fa0-0x6faf] Oct 1 21:21:13 Hilbert kernel: [ 0.380337] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106 Oct 1 21:21:13 Hilbert kernel: [ 0.380364] pci 0000:00:1f.2: reg 10: [io 0x6eb0-0x6eb7] Oct 1 21:21:13 Hilbert kernel: [ 0.380377] pci 0000:00:1f.2: reg 14: [io 0x6eb8-0x6ebb] Oct 1 21:21:13 Hilbert kernel: [ 0.380389] pci 0000:00:1f.2: reg 18: [io 0x6ec0-0x6ec7] Oct 1 21:21:13 Hilbert kernel: [ 0.380402] pci 0000:00:1f.2: reg 1c: [io 0x6ec8-0x6ecb] Oct 1 21:21:13 Hilbert kernel: [ 0.380414] pci 0000:00:1f.2: reg 20: [io 0x6ee0-0x6eff] Oct 1 21:21:13 Hilbert kernel: [ 0.380427] pci 0000:00:1f.2: reg 24: [mem 0xfebfb800-0xfebfbfff] Oct 1 21:21:13 Hilbert kernel: [ 0.380476] pci 0000:00:1f.2: PME# supported from D3hot Oct 1 21:21:13 Hilbert kernel: [ 0.380481] pci 0000:00:1f.2: PME# disabled Oct 1 21:21:13 Hilbert kernel: [ 0.380506] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05 Oct 1 21:21:13 Hilbert kernel: [ 0.380523] pci 0000:00:1f.3: reg 10: [mem 0xfebfb700-0xfebfb7ff] Oct 1 21:21:13 Hilbert kernel: [ 0.380567] pci 0000:00:1f.3: reg 20: [io 0x10c0-0x10df] Oct 1 21:21:13 Hilbert kernel: [ 0.380658] pci 0000:01:00.0: [10de:0407] type 0 class 0x000300 Oct 1 21:21:13 Hilbert kernel: [ 0.380678] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff] Oct 1 21:21:13 Hilbert kernel: [ 0.380699] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] Oct 1 21:21:13 Hilbert kernel: [ 0.380721] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit] Oct 1 21:21:13 Hilbert kernel: [ 0.380736] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f] Oct 1 21:21:13 Hilbert kernel: [ 0.380750] pci 0000:01:00.0: reg 30: [mem 0xfea00000-0xfea1ffff pref] Oct 1 21:21:13 Hilbert kernel: [ 0.380836] pci 0000:00:01.0: PCI bridge to [bus 01-01] Oct 1 21:21:13 Hilbert kernel: [ 0.380839] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] Oct 1 21:21:13 Hilbert kernel: [ 0.380843] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff] Oct 1 21:21:13 Hilbert kernel: [ 0.380848] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] Oct 1 21:21:13 Hilbert kernel: [ 0.380911] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b] Oct 1 21:21:13 Hilbert kernel: [ 0.380916] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) Oct 1 21:21:13 Hilbert kernel: [ 0.380922] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) Oct 1 21:21:13 Hilbert kernel: [ 0.380931] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Oct 1 21:21:13 Hilbert kernel: [ 0.381094] pci 0000:0c:00.0: [8086:4222] type 0 class 0x000280 Oct 1 21:21:13 Hilbert kernel: [ 0.381150] pci 0000:0c:00.0: reg 10: [mem 0xf9fff000-0xf9ffffff] Oct 1 21:21:13 Hilbert kernel: [ 0.381494] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold Oct 1 21:21:13 Hilbert kernel: [ 0.381507] pci 0000:0c:00.0: PME# disabled Oct 1 21:21:13 Hilbert kernel: [ 0.381578] pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' Oct 1 21:21:13 Hilbert kernel: [ 0.381606] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c] Oct 1 21:21:13 Hilbert kernel: [ 0.381611] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) Oct 1 21:21:13 Hilbert kernel: [ 0.381617] pci 0000:00:1c.1: bridge window [mem 0xf9f00000-0xf9ffffff] Oct 1 21:21:13 Hilbert kernel: [ 0.381625] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Oct 1 21:21:13 Hilbert kernel: [ 0.381690] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e] Oct 1 21:21:13 Hilbert kernel: [ 0.381695] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] Oct 1 21:21:13 Hilbert kernel: [ 0.381700] pci 0000:00:1c.3: bridge window [mem 0xf9c00000-0xf9efffff] Oct 1 21:21:13 Hilbert kernel: [ 0.381709] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] Oct 1 21:21:13 Hilbert kernel: [ 0.381755] pci 0000:03:00.0: [14e4:170c] type 0 class 0x000200 Oct 1 21:21:13 Hilbert kernel: [ 0.381777] pci 0000:03:00.0: reg 10: [mem 0xf9bfe000-0xf9bfffff] Oct 1 21:21:13 Hilbert kernel: [ 0.381866] pci 0000:03:00.0: supports D1 D2 Oct 1 21:21:13 Hilbert kernel: [ 0.381868] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold Oct 1 21:21:13 Hilbert kernel: [ 0.381873] pci 0000:03:00.0: PME# disabled Oct 1 21:21:13 Hilbert kernel: [ 0.381895] pci 0000:03:01.0: [1180:0832] type 0 class 0x000c00 Oct 1 21:21:13 Hilbert kernel: [ 0.381913] pci 0000:03:01.0: proprietary Ricoh MMC controller disabled (via firewire function) Oct 1 21:21:13 Hilbert kernel: [ 0.381915] pci 0000:03:01.0: MMC cards are now supported by standard SDHCI controller Oct 1 21:21:13 Hilbert kernel: [ 0.381931] pci 0000:03:01.0: reg 10: [mem 0xf9bfd800-0xf9bfdfff] Oct 1 21:21:13 Hilbert kernel: [ 0.382020] pci 0000:03:01.0: supports D1 D2 Oct 1 21:21:13 Hilbert kernel: [ 0.382022] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold Oct 1 21:21:13 Hilbert kernel: [ 0.382028] pci 0000:03:01.0: PME# disabled Oct 1 21:21:13 Hilbert kernel: [ 0.382050] pci 0000:03:01.1: [1180:0822] type 0 class 0x000805 Oct 1 21:21:13 Hilbert kernel: [ 0.382074] pci 0000:03:01.1: reg 10: [mem 0xf9bfd400-0xf9bfd4ff] Oct 1 21:21:13 Hilbert kernel: [ 0.382166] pci 0000:03:01.1: supports D1 D2 Oct 1 21:21:13 Hilbert kernel: [ 0.382168] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold Oct 1 21:21:13 Hilbert kernel: [ 0.382173] pci 0000:03:01.1: PME# disabled Oct 1 21:21:13 Hilbert kernel: [ 0.382199] pci 0000:03:01.2: [1180:0592] type 0 class 0x000880 Oct 1 21:21:13 Hilbert kernel: [ 0.382223] pci 0000:03:01.2: reg 10: [mem 0xf9bfd600-0xf9bfd6ff] Oct 1 21:21:13 Hilbert kernel: [ 0.382315] pci 0000:03:01.2: supports D1 D2 Oct 1 21:21:13 Hilbert kernel: [ 0.382317] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold Oct 1 21:21:13 Hilbert kernel: [ 0.382322] pci 0000:03:01.2: PME# disabled Oct 1 21:21:13 Hilbert kernel: [ 0.382345] pci 0000:03:01.3: [1180:0852] type 0 class 0x000880 Oct 1 21:21:13 Hilbert kernel: [ 0.382368] pci 0000:03:01.3: reg 10: [mem 0xf9bfd700-0xf9bfd7ff] Oct 1 21:21:13 Hilbert kernel: [ 0.382461] pci 0000:03:01.3: supports D1 D2 Oct 1 21:21:13 Hilbert kernel: [ 0.382463] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold Oct 1 21:21:13 Hilbert kernel: [ 0.382468] pci 0000:03:01.3: PME# disabled Oct 1 21:21:13 Hilbert kernel: [ 0.382541] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) Oct 1 21:21:13 Hilbert kernel: [ 0.382547] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) Oct 1 21:21:13 Hilbert kernel: [ 0.382552] pci 0000:00:1e.0: bridge window [mem 0xf9b00000-0xf9bfffff] Oct 1 21:21:13 Hilbert kernel: [ 0.382561] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Oct 1 21:21:13 Hilbert kernel: [ 0.382564] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) Oct 1 21:21:13 Hilbert kernel: [ 0.382567] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) Oct 1 21:21:13 Hilbert kernel: [ 0.382602] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Oct 1 21:21:13 Hilbert kernel: [ 0.382798] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] Oct 1 21:21:13 Hilbert kernel: [ 0.382883] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] Oct 1 21:21:13 Hilbert kernel: [ 0.382922] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] Oct 1 21:21:13 Hilbert kernel: [ 0.382963] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] Oct 1 21:21:13 Hilbert kernel: [ 0.383005] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] Oct 1 21:21:13 Hilbert kernel: [ 0.383048] pci0000:00: Requesting ACPI _OSC control (0x1d) Oct 1 21:21:13 Hilbert kernel: [ 0.383051] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d Oct 1 21:21:13 Hilbert kernel: [ 0.383053] ACPI _OSC control for PCIe not granted, disabling ASPM Oct 1 21:21:13 Hilbert kernel: [ 0.390718] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *7 Oct 1 21:21:13 Hilbert kernel: [ 0.390783] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 Oct 1 21:21:13 Hilbert kernel: [ 0.390844] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4 Oct 1 21:21:13 Hilbert kernel: [ 0.390909] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11) Oct 1 21:21:13 Hilbert kernel: [ 0.390971] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Oct 1 21:21:13 Hilbert kernel: [ 0.391035] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Oct 1 21:21:13 Hilbert kernel: [ 0.391099] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) Oct 1 21:21:13 Hilbert kernel: [ 0.391155] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. Oct 1 21:21:13 Hilbert kernel: [ 0.391290] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none Oct 1 21:21:13 Hilbert kernel: [ 0.391296] vgaarb: loaded Oct 1 21:21:13 Hilbert kernel: [ 0.391297] vgaarb: bridge control possible 0000:01:00.0 Oct 1 21:21:13 Hilbert kernel: [ 0.391500] SCSI subsystem initialized Oct 1 21:21:13 Hilbert kernel: [ 0.391574] libata version 3.00 loaded. Oct 1 21:21:13 Hilbert kernel: [ 0.391620] usbcore: registered new interface driver usbfs Oct 1 21:21:13 Hilbert kernel: [ 0.391631] usbcore: registered new interface driver hub Oct 1 21:21:13 Hilbert kernel: [ 0.391662] usbcore: registered new device driver usb Oct 1 21:21:13 Hilbert kernel: [ 0.391749] PCI: Using ACPI for IRQ routing Oct 1 21:21:13 Hilbert kernel: [ 0.394395] PCI: pci_cache_line_size set to 64 bytes Oct 1 21:21:13 Hilbert kernel: [ 0.394524] reserve RAM buffer: 000000000009f000 - 000000000009ffff Oct 1 21:21:13 Hilbert kernel: [ 0.394526] reserve RAM buffer: 000000007fe6d800 - 000000007fffffff Oct 1 21:21:13 Hilbert kernel: [ 0.394628] NetLabel: Initializing Oct 1 21:21:13 Hilbert kernel: [ 0.394630] NetLabel: domain hash size = 128 Oct 1 21:21:13 Hilbert kernel: [ 0.394631] NetLabel: protocols = UNLABELED CIPSOv4 Oct 1 21:21:13 Hilbert kernel: [ 0.394645] NetLabel: unlabeled traffic allowed by default Oct 1 21:21:13 Hilbert kernel: [ 0.394686] HPET: 3 timers in total, 0 timers will be used for per-cpu timer Oct 1 21:21:13 Hilbert kernel: [ 0.394692] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Oct 1 21:21:13 Hilbert kernel: [ 0.394697] hpet0: 3 comparators, 64-bit 14.318180 MHz counter Oct 1 21:21:13 Hilbert kernel: [ 0.400141] Switching to clocksource hpet Oct 1 21:21:13 Hilbert kernel: [ 0.407373] AppArmor: AppArmor Filesystem Enabled Oct 1 21:21:13 Hilbert kernel: [ 0.407408] pnp: PnP ACPI init Oct 1 21:21:13 Hilbert kernel: [ 0.407430] ACPI: bus type pnp registered Oct 1 21:21:13 Hilbert kernel: [ 0.409700] Switched to NOHz mode on CPU #0 Oct 1 21:21:13 Hilbert kernel: [ 0.409753] Switched to NOHz mode on CPU #1 Oct 1 21:21:13 Hilbert kernel: [ 0.417325] pnp 00:00: [bus 00-ff] Oct 1 21:21:13 Hilbert kernel: [ 0.417329] pnp 00:00: [io 0x0000-0x0cf7 window] Oct 1 21:21:13 Hilbert kernel: [ 0.417331] pnp 00:00: [io 0x0cf8-0x0cff] Oct 1 21:21:13 Hilbert kernel: [ 0.417334] pnp 00:00: [io 0x0d00-0xffff window] Oct 1 21:21:13 Hilbert kernel: [ 0.417336] pnp 00:00: [mem 0x000a0000-0x000bffff window] Oct 1 21:21:13 Hilbert kernel: [ 0.417338] pnp 00:00: [mem 0x000d0000-0x000dffff window] Oct 1 21:21:13 Hilbert kernel: [ 0.417341] pnp 00:00: [mem 0x80000000-0xf3ffffff window] Oct 1 21:21:13 Hilbert kernel: [ 0.417343] pnp 00:00: [mem 0xf8000000-0xfebfffff window] Oct 1 21:21:13 Hilbert kernel: [ 0.417345] pnp 00:00: [mem 0xfec10000-0xfecfffff window] Oct 1 21:21:13 Hilbert kernel: [ 0.417347] pnp 00:00: [mem 0xfed1c000-0xfed1ffff window] Oct 1 21:21:13 Hilbert kernel: [ 0.417350] pnp 00:00: [mem 0xfed90000-0xfed9ffff window] Oct 1 21:21:13 Hilbert kernel: [ 0.417352] pnp 00:00: [mem 0xfeda7000-0xfedfffff window] Oct 1 21:21:13 Hilbert kernel: [ 0.417354] pnp 00:00: [mem 0xfee10000-0xff9fffff window] Oct 1 21:21:13 Hilbert kernel: [ 0.417359] pnp 00:00: [mem 0xffb00000-0xffefffff window] Oct 1 21:21:13 Hilbert kernel: [ 0.417446] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) Oct 1 21:21:13 Hilbert kernel: [ 0.417479] pnp 00:01: [irq 12] Oct 1 21:21:13 Hilbert kernel: [ 0.417502] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active) Oct 1 21:21:13 Hilbert kernel: [ 0.417517] pnp 00:02: [io 0x0060] Oct 1 21:21:13 Hilbert kernel: [ 0.417519] pnp 00:02: [io 0x0064] Oct 1 21:21:13 Hilbert kernel: [ 0.417521] pnp 00:02: [io 0x0062] Oct 1 21:21:13 Hilbert kernel: [ 0.417522] pnp 00:02: [io 0x0066] Oct 1 21:21:13 Hilbert kernel: [ 0.417528] pnp 00:02: [irq 1] Oct 1 21:21:13 Hilbert kernel: [ 0.417552] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) Oct 1 21:21:13 Hilbert kernel: [ 0.417567] pnp 00:03: [io 0x0070-0x0071] Oct 1 21:21:13 Hilbert kernel: [ 0.417573] pnp 00:03: [irq 8] Oct 1 21:21:13 Hilbert kernel: [ 0.417575] pnp 00:03: [io 0x0072-0x0077] Oct 1 21:21:13 Hilbert kernel: [ 0.417596] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) Oct 1 21:21:13 Hilbert kernel: [ 0.417611] pnp 00:04: [io 0x0061] Oct 1 21:21:13 Hilbert kernel: [ 0.417613] pnp 00:04: [io 0x0063] Oct 1 21:21:13 Hilbert kernel: [ 0.417615] pnp 00:04: [io 0x0065] Oct 1 21:21:13 Hilbert kernel: [ 0.417617] pnp 00:04: [io 0x0067] Oct 1 21:21:13 Hilbert kernel: [ 0.417638] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) Oct 1 21:21:13 Hilbert kernel: [ 0.417652] pnp 00:05: [io 0x0c80-0x0cff] Oct 1 21:21:13 Hilbert kernel: [ 0.417712] system 00:05: [io 0x0c80-0x0cff] could not be reserved Oct 1 21:21:13 Hilbert kernel: [ 0.417716] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) Oct 1 21:21:13 Hilbert modem-manager[939]: ModemManager (version 0.5) starting... Oct 1 21:21:13 Hilbert NetworkManager[944]: NetworkManager (version 0.9.1.90) is starting... Oct 1 21:21:13 Hilbert NetworkManager[944]: Read config file /etc/NetworkManager/NetworkManager.conf Oct 1 21:21:13 Hilbert kernel: [ 0.417733] pnp 00:06: [dma 4] Oct 1 21:21:13 Hilbert kernel: [ 0.417736] pnp 00:06: [io 0x0000-0x000f] Oct 1 21:21:13 Hilbert kernel: [ 0.417738] pnp 00:06: [io 0x0080-0x0085] Oct 1 21:21:13 Hilbert kernel: [ 0.417740] pnp 00:06: [io 0x0087-0x008f] Oct 1 21:21:13 Hilbert kernel: [ 0.417742] pnp 00:06: [io 0x00c0-0x00df] Oct 1 21:21:13 Hilbert kernel: [ 0.417744] pnp 00:06: [io 0x0010-0x001f] Oct 1 21:21:13 Hilbert kernel: [ 0.417746] pnp 00:06: [io 0x0090-0x0091] Oct 1 21:21:13 Hilbert kernel: [ 0.417748] pnp 00:06: [io 0x0093-0x009f] Oct 1 21:21:13 Hilbert kernel: [ 0.417771] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active) Oct 1 21:21:13 Hilbert kernel: [ 0.417785] pnp 00:07: [io 0x00f0-0x00ff] Oct 1 21:21:13 Hilbert kernel: [ 0.417791] pnp 00:07: [irq 13] Oct 1 21:21:13 Hilbert kernel: [ 0.417817] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) Oct 1 21:21:13 Hilbert kernel: [ 0.417852] pnp 00:08: [mem 0xfed00000-0xfed003ff] Oct 1 21:21:13 Hilbert kernel: [ 0.417901] system 00:08: [mem 0xfed00000-0xfed003ff] has been reserved Oct 1 21:21:13 Hilbert kernel: [ 0.417905] system 00:08: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) Oct 1 21:21:13 Hilbert kernel: [ 0.418027] pnp 00:09: [io 0x0900-0x097f] Oct 1 21:21:13 Hilbert kernel: [ 0.418029] pnp 00:09: [io 0x0092] Oct 1 21:21:13 Hilbert kernel: [ 0.418031] pnp 00:09: [io 0x00b2-0x00b3] Oct 1 21:21:13 Hilbert kernel: [ 0.418033] pnp 00:09: [io 0x0020-0x0021] Oct 1 21:21:13 Hilbert kernel: [ 0.418035] pnp 00:09: [io 0x00a0-0x00a1] Oct 1 21:21:13 Hilbert kernel: [ 0.418038] pnp 00:09: [irq 0 disabled] Oct 1 21:21:13 Hilbert kernel: [ 0.418039] pnp 00:09: [io 0x04d0-0x04d1] Oct 1 21:21:13 Hilbert kernel: [ 0.418041] pnp 00:09: [io 0x1000-0x1005] Oct 1 21:21:13 Hilbert kernel: [ 0.418043] pnp 00:09: [io 0x1008-0x100f] Oct 1 21:21:13 Hilbert kernel: [ 0.418058] pnp 00:09: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] Oct 1 21:21:13 Hilbert kernel: [ 0.418062] pnp 00:09: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] Oct 1 21:21:13 Hilbert kernel: [ 0.418112] system 00:09: [io 0x0900-0x097f] has been reserved Oct 1 21:21:13 Hilbert kernel: [ 0.418116] system 00:09: [io 0x04d0-0x04d1] has been reserved Oct 1 21:21:13 Hilbert kernel: [ 0.418119] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) Oct 1 21:21:13 Hilbert kernel: [ 0.418135] pnp 00:0a: [io 0xf400-0xf4fe] Oct 1 21:21:13 Hilbert kernel: [ 0.418137] pnp 00:0a: [io 0x0086] Oct 1 21:21:13 Hilbert kernel: [ 0.418139] pnp 00:0a: [io 0x1006-0x1007] Oct 1 21:21:13 Hilbert kernel: [ 0.418141] pnp 00:0a: [io 0x100a-0x1059] Oct 1 21:21:13 Hilbert kernel: [ 0.418143] pnp 00:0a: [io 0x1060-0x107f] Oct 1 21:21:13 Hilbert kernel: [ 0.418145] pnp 00:0a: [io 0x1080-0x10bf] Oct 1 21:21:13 Hilbert kernel: [ 0.418147] pnp 00:0a: [io 0x10c0-0x10df] Oct 1 21:21:13 Hilbert kernel: [ 0.418151] pnp 00:0a: [io 0x1010-0x102f] Oct 1 21:21:13 Hilbert kernel: [ 0.418153] pnp 00:0a: [io 0x0809] Oct 1 21:21:13 Hilbert kernel: [ 0.418167] pnp 00:0a: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] Oct 1 21:21:13 Hilbert kernel: [ 0.418170] pnp 00:0a: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] Oct 1 21:21:13 Hilbert kernel: [ 0.418173] pnp 00:0a: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] Oct 1 21:21:13 Hilbert kernel: [ 0.418177] pnp 00:0a: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] Oct 1 21:21:13 Hilbert kernel: [ 0.418232] system 00:0a: [io 0xf400-0xf4fe] has been reserved Oct 1 21:21:13 Hilbert kernel: [ 0.418235] system 00:0a: [io 0x1080-0x10bf] has been reserved Oct 1 21:21:13 Hilbert kernel: [ 0.418238] system 00:0a: [io 0x10c0-0x10df] has been reserved Oct 1 21:21:13 Hilbert kernel: [ 0.418241] system 00:0a: [io 0x0809] has been reserved Oct 1 21:21:13 Hilbert kernel: [ 0.418244] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) Oct 1 21:21:13 Hilbert kernel: [ 0.427828] pnp 00:0b: [mem 0x00000000-0x0009efff] Oct 1 21:21:13 Hilbert kernel: [ 0.427831] pnp 00:0b: [mem 0x0009f000-0x0009ffff] Oct 1 21:21:13 Hilbert kernel: [ 0.427833] pnp 00:0b: [mem 0x000c0000-0x000cffff] Oct 1 21:21:13 Hilbert kernel: [ 0.427835] pnp 00:0b: [mem 0x000e0000-0x000fffff] Oct 1 21:21:13 Hilbert kernel: [ 0.427837] pnp 00:0b: [mem 0x00100000-0x7fe6d7ff] Oct 1 21:21:13 Hilbert kernel: [ 0.427839] pnp 00:0b: [mem 0x7fe6d800-0x7fefffff] Oct 1 21:21:13 Hilbert kernel: [ 0.427842] pnp 00:0b: [mem 0x7ff00000-0x7fffffff] Oct 1 21:21:13 Hilbert kernel: [ 0.427844] pnp 00:0b: [mem 0x7ff00000-0x806fffff] Oct 1 21:21:13 Hilbert kernel: [ 0.427845] pnp 00:0b: [mem 0xfff00000-0xffffffff] Oct 1 21:21:13 Hilbert kernel: [ 0.427847] pnp 00:0b: [mem 0xffa00000-0xffafffff] Oct 1 21:21:13 Hilbert kernel: [ 0.427849] pnp 00:0b: [mem 0xfec00000-0xfec0ffff] Oct 1 21:21:13 Hilbert kernel: [ 0.427851] pnp 00:0b: [mem 0xfee00000-0xfee0ffff] Oct 1 21:21:13 Hilbert kernel: [ 0.427853] pnp 00:0b: [mem 0xfed20000-0xfed8ffff] Oct 1 21:21:13 Hilbert kernel: [ 0.427855] pnp 00:0b: [mem 0xfeda0000-0xfeda3fff] Oct 1 21:21:13 Hilbert kernel: [ 0.427857] pnp 00:0b: [mem 0xfeda4000-0xfeda4fff] Oct 1 21:21:13 Hilbert kernel: [ 0.427859] pnp 00:0b: [mem 0xfeda5000-0xfeda5fff] Oct 1 21:21:13 Hilbert kernel: [ 0.427861] pnp 00:0b: [mem 0xfeda6000-0xfeda6fff] Oct 1 21:21:13 Hilbert kernel: [ 0.427863] pnp 00:0b: [mem 0xfed18000-0xfed1bfff] Oct 1 21:21:13 Hilbert kernel: [ 0.427865] pnp 00:0b: [mem 0xf4000000-0xf7ffffff] Oct 1 21:21:13 Hilbert kernel: [ 0.427971] system 00:0b: [mem 0x00000000-0x0009efff] could not be reserved Oct 1 21:21:13 Hilbert kernel: [ 0.427974] system 00:0b: [mem 0x0009f000-0x0009ffff] could not be reserved Oct 1 21:21:13 Hilbert kernel: [ 0.427977] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved Oct 1 21:21:13 Hilbert kernel: [ 0.427980] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved Oct 1 21:21:13 Hilbert kernel: [ 0.427983] system 00:0b: [mem 0x00100000-0x7fe6d7ff] could not be reserved Oct 1 21:21:13 Hilbert kernel: [ 0.427986] system 00:0b: [mem 0x7fe6d800-0x7fefffff] has been reserved Oct 1 21:21:13 Hilbert kernel: [ 0.427989] system 00:0b: [mem 0x7ff00000-0x7fffffff] has been reserved Oct 1 21:21:13 Hilbert kernel: [ 0.427992] system 00:0b: [mem 0x7ff00000-0x806fffff] could not be reserved Oct 1 21:21:13 Hilbert kernel: [ 0.427995] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved Oct 1 21:21:13 Hilbert kernel: [ 0.427998] system 00:0b: [mem 0xffa00000-0xffafffff] has been reserved Oct 1 21:21:13 Hilbert kernel: [ 0.428000] system 00:0b: [mem 0xfec00000-0xfec0ffff] could not be reserved Oct 1 21:21:13 Hilbert kernel: [ 0.428003] system 00:0b: [mem 0xfee00000-0xfee0ffff] has been reserved Oct 1 21:21:13 Hilbert kernel: [ 0.428006] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved Oct 1 21:21:13 Hilbert kernel: [ 0.428009] system 00:0b: [mem 0xfeda0000-0xfeda3fff] has been reserved Oct 1 21:21:13 Hilbert kernel: [ 0.428012] system 00:0b: [mem 0xfeda4000-0xfeda4fff] has been reserved Oct 1 21:21:13 Hilbert kernel: [ 0.428014] system 00:0b: [mem 0xfeda5000-0xfeda5fff] has been reserved Oct 1 21:21:13 Hilbert kernel: [ 0.428017] system 00:0b: [mem 0xfeda6000-0xfeda6fff] has been reserved Oct 1 21:21:13 Hilbert kernel: [ 0.428020] system 00:0b: [mem 0xfed18000-0xfed1bfff] has been reserved Oct 1 21:21:13 Hilbert kernel: [ 0.428023] system 00:0b: [mem 0xf4000000-0xf7ffffff] has been reserved Oct 1 21:21:13 Hilbert kernel: [ 0.428027] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) Oct 1 21:21:13 Hilbert kernel: [ 0.428082] pnp: PnP ACPI: found 12 devices Oct 1 21:21:13 Hilbert kernel: [ 0.428084] ACPI: ACPI bus type pnp unregistered Oct 1 21:21:13 Hilbert kernel: [ 0.434160] PCI: max bus depth: 1 pci_try_num: 2 Oct 1 21:21:13 Hilbert kernel: [ 0.434226] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref] Oct 1 21:21:13 Hilbert kernel: [ 0.434231] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff] Oct 1 21:21:13 Hilbert kernel: [ 0.434234] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80200000-0x803fffff] Oct 1 21:21:13 Hilbert kernel: [ 0.434238] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref] Oct 1 21:21:13 Hilbert kernel: [ 0.434242] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff] Oct 1 21:21:13 Hilbert kernel: [ 0.434245] pci 0000:00:01.0: PCI bridge to [bus 01-01] Oct 1 21:21:13 Hilbert kernel: [ 0.434248] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] Oct 1 21:21:13 Hilbert kernel: [ 0.434252] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff] Oct 1 21:21:13 Hilbert kernel: [ 0.434255] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] Oct 1 21:21:13 Hilbert kernel: [ 0.434260] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b] Oct 1 21:21:13 Hilbert kernel: [ 0.434264] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] Oct 1 21:21:13 Hilbert kernel: [ 0.434270] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff] Oct 1 21:21:13 Hilbert kernel: [ 0.434276] pci 0000:00:1c.0: bridge window [mem 0x80400000-0x805fffff 64bit pref] Oct 1 21:21:13 Hilbert kernel: [ 0.434284] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c] Oct 1 21:21:13 Hilbert kernel: [ 0.434287] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] Oct 1 21:21:13 Hilbert kernel: [ 0.434294] pci 0000:00:1c.1: bridge window [mem 0xf9f00000-0xf9ffffff] Oct 1 21:21:13 Hilbert kernel: [ 0.434300] pci 0000:00:1c.1: bridge window [mem 0x80000000-0x801fffff 64bit pref] Oct 1 21:21:13 Hilbert kernel: [ 0.434308] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e] Oct 1 21:21:13 Hilbert kernel: [ 0.434311] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] Oct 1 21:21:13 Hilbert kernel: [ 0.434318] pci 0000:00:1c.3: bridge window [mem 0xf9c00000-0xf9efffff] Oct 1 21:21:13 Hilbert kernel: [ 0.434323] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] Oct 1 21:21:13 Hilbert kernel: [ 0.434332] pci 0000:00:1e.0: PCI bridge to [bus 03-03] Oct 1 21:21:13 Hilbert kernel: [ 0.434334] pci 0000:00:1e.0: bridge window [io disabled] Oct 1 21:21:13 Hilbert kernel: [ 0.434341] pci 0000:00:1e.0: bridge window [mem 0xf9b00000-0xf9bfffff] Oct 1 21:21:13 Hilbert kernel: [ 0.434346] pci 0000:00:1e.0: bridge window [mem pref disabled] Oct 1 21:21:13 Hilbert kernel: [ 0.434373] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Oct 1 21:21:13 Hilbert kernel: [ 0.434378] pci 0000:00:01.0: setting latency timer to 64 Oct 1 21:21:13 Hilbert kernel: [ 0.434386] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Oct 1 21:21:13 Hilbert kernel: [ 0.434391] pci 0000:00:1c.0: setting latency timer to 64 Oct 1 21:21:13 Hilbert kernel: [ 0.434402] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Oct 1 21:21:13 Hilbert kernel: [ 0.434407] pci 0000:00:1c.1: setting latency timer to 64 Oct 1 21:21:13 Hilbert kernel: [ 0.434418] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 Oct 1 21:21:13 Hilbert kernel: [ 0.434423] pci 0000:00:1c.3: setting latency timer to 64 Oct 1 21:21:13 Hilbert kernel: [ 0.434432] pci 0000:00:1e.0: setting latency timer to 64 Oct 1 21:21:13 Hilbert kernel: [ 0.434437] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] Oct 1 21:21:13 Hilbert kernel: [ 0.434439] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff] Oct 1 21:21:13 Hilbert kernel: [ 0.434442] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] Oct 1 21:21:13 Hilbert kernel: [ 0.434444] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfeafffff] Oct 1 21:21:13 Hilbert kernel: [ 0.434446] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] Oct 1 21:21:13 Hilbert kernel: [ 0.434449] pci_bus 0000:0b: resource 0 [io 0x3000-0x3fff] Oct 1 21:21:13 Hilbert kernel: [ 0.434451] pci_bus 0000:0b: resource 1 [mem 0x80200000-0x803fffff] Oct 1 21:21:13 Hilbert kernel: [ 0.434453] pci_bus 0000:0b: resource 2 [mem 0x80400000-0x805fffff 64bit pref] Oct 1 21:21:13 Hilbert kernel: [ 0.434456] pci_bus 0000:0c: resource 0 [io 0x2000-0x2fff] Oct 1 21:21:13 Hilbert kernel: [ 0.434458] pci_bus 0000:0c: resource 1 [mem 0xf9f00000-0xf9ffffff] Oct 1 21:21:13 Hilbert kernel: [ 0.434461] pci_bus 0000:0c: resource 2 [mem 0x80000000-0x801fffff 64bit pref] Oct 1 21:21:13 Hilbert kernel: [ 0.434463] pci_bus 0000:0d: resource 0 [io 0xd000-0xdfff] Oct 1 21:21:13 Hilbert kernel: [ 0.434465] pci_bus 0000:0d: resource 1 [mem 0xf9c00000-0xf9efffff] Oct 1 21:21:13 Hilbert kernel: [ 0.434468] pci_bus 0000:0d: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] Oct 1 21:21:13 Hilbert kernel: [ 0.434470] pci_bus 0000:03: resource 1 [mem 0xf9b00000-0xf9bfffff] Oct 1 21:21:13 Hilbert kernel: [ 0.434473] pci_bus 0000:03: resource 4 [io 0x0000-0xffff] Oct 1 21:21:13 Hilbert kernel: [ 0.434475] pci_bus 0000:03: resource 5 [mem 0x00000000-0xfffffffff] Oct 1 21:21:13 Hilbert kernel: [ 0.434517] NET: Registered protocol family 2 Oct 1 21:21:13 Hilbert kernel: [ 0.434634] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) Oct 1 21:21:13 Hilbert kernel: [ 0.435370] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) Oct 1 21:21:13 Hilbert kernel: [ 0.437534] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) Oct 1 21:21:13 Hilbert kernel: [ 0.438118] TCP: Hash tables configured (established 262144 bind 65536) Oct 1 21:21:13 Hilbert kernel: [ 0.438120] TCP reno registered Oct 1 21:21:13 Hilbert kernel: [ 0.438128] UDP hash table entries: 1024 (order: 3, 32768 bytes) Oct 1 21:21:13 Hilbert kernel: [ 0.438153] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) Oct 1 21:21:13 Hilbert kernel: [ 0.438304] NET: Registered protocol family 1 Oct 1 21:21:13 Hilbert kernel: [ 0.438516] pci 0000:01:00.0: Boot video device Oct 1 21:21:13 Hilbert kernel: [ 0.438541] PCI: CLS 64 bytes, default 64 Oct 1 21:21:13 Hilbert kernel: [ 0.438565] Simple Boot Flag at 0x79 set to 0x1 Oct 1 21:21:13 Hilbert kernel: [ 0.438913] audit: initializing netlink socket (disabled) Oct 1 21:21:13 Hilbert kernel: [ 0.438924] type=2000 audit(1317496857.430:1): initialized Oct 1 21:21:13 Hilbert kernel: [ 0.466237] HugeTLB registered 2 MB page size, pre-allocated 0 pages Oct 1 21:21:13 Hilbert kernel: [ 0.478777] VFS: Disk quotas dquot_6.5.2 Oct 1 21:21:13 Hilbert kernel: [ 0.478837] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Oct 1 21:21:13 Hilbert kernel: [ 0.479429] fuse init (API version 7.16) Oct 1 21:21:13 Hilbert kernel: [ 0.479513] msgmni has been set to 3982 Oct 1 21:21:13 Hilbert kernel: [ 0.479842] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Oct 1 21:21:13 Hilbert kernel: [ 0.479872] io scheduler noop registered Oct 1 21:21:13 Hilbert kernel: [ 0.479874] io scheduler deadline registered Oct 1 21:21:13 Hilbert kernel: [ 0.479912] io scheduler cfq registered (default) Oct 1 21:21:13 Hilbert kernel: [ 0.480057] pcieport 0000:00:01.0: setting latency timer to 64 Oct 1 21:21:13 Hilbert kernel: [ 0.480092] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X Oct 1 21:21:13 Hilbert kernel: [ 0.480141] pcieport 0000:00:1c.0: setting latency timer to 64 Oct 1 21:21:13 Hilbert kernel: [ 0.480199] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X Oct 1 21:21:13 Hilbert kernel: [ 0.480278] pcieport 0000:00:1c.1: setting latency timer to 64 Oct 1 21:21:13 Hilbert kernel: [ 0.480334] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X Oct 1 21:21:13 Hilbert kernel: [ 0.480415] pcieport 0000:00:1c.3: setting latency timer to 64 Oct 1 21:21:13 Hilbert kernel: [ 0.480471] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X Oct 1 21:21:13 Hilbert kernel: [ 0.480568] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Oct 1 21:21:13 Hilbert kernel: [ 0.480590] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 Oct 1 21:21:13 Hilbert kernel: [ 0.480633] intel_idle: MWAIT substates: 0x22220 Oct 1 21:21:13 Hilbert kernel: [ 0.480635] intel_idle: does not run on family 6 model 15 Oct 1 21:21:13 Hilbert kernel: [ 0.480706] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared Oct 1 21:21:13 Hilbert kernel: [ 0.480752] ACPI: AC Adapter [AC] (off-line) Oct 1 21:21:13 Hilbert kernel: [ 0.480823] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 Oct 1 21:21:13 Hilbert kernel: [ 0.481233] ACPI: Lid Switch [LID] Oct 1 21:21:13 Hilbert kernel: [ 0.481277] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 Oct 1 21:21:13 Hilbert kernel: [ 0.481281] ACPI: Power Button [PBTN] Oct 1 21:21:13 Hilbert kernel: [ 0.481321] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 Oct 1 21:21:13 Hilbert kernel: [ 0.481325] ACPI: Sleep Button [SBTN] Oct 1 21:21:13 Hilbert kernel: [ 0.481350] ACPI: acpi_idle registered with cpuidle Oct 1 21:21:13 Hilbert kernel: [ 0.481494] Monitor-Mwait will be used to enter C-1 state Oct 1 21:21:13 Hilbert kernel: [ 0.481523] Monitor-Mwait will be used to enter C-2 state Oct 1 21:21:13 Hilbert kernel: [ 0.481547] Monitor-Mwait will be used to enter C-3 state Oct 1 21:21:13 Hilbert kernel: [ 0.481552] Marking TSC unstable due to TSC halts in idle Oct 1 21:21:13 Hilbert kernel: [ 0.505051] thermal LNXTHERM:00: registered as thermal_zone0 Oct 1 21:21:13 Hilbert kernel: [ 0.505054] ACPI: Thermal Zone [THM] (67 C) Oct 1 21:21:13 Hilbert kernel: [ 0.505083] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared Oct 1 21:21:13 Hilbert kernel: [ 0.505140] ERST: Table is not found! Oct 1 21:21:13 Hilbert kernel: [ 0.505220] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled Oct 1 21:21:13 Hilbert kernel: [ 0.523946] ACPI: Battery Slot [BAT0] (battery present) Oct 1 21:21:13 Hilbert kernel: [ 0.644113] Freeing initrd memory: 13416k freed Oct 1 21:21:13 Hilbert kernel: [ 0.711329] Linux agpgart interface v0.103 Oct 1 21:21:13 Hilbert kernel: [ 0.712563] brd: module loaded Oct 1 21:21:13 Hilbert kernel: [ 0.713072] loop: module loaded Oct 1 21:21:13 Hilbert kernel: [ 0.713216] ata_piix 0000:00:1f.1: version 2.13 Oct 1 21:21:13 Hilbert kernel: [ 0.713230] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Oct 1 21:21:13 Hilbert kernel: [ 0.713276] ata_piix 0000:00:1f.1: setting latency timer to 64 Oct 1 21:21:13 Hilbert kernel: [ 0.713593] scsi0 : ata_piix Oct 1 21:21:13 Hilbert kernel: [ 0.713679] scsi1 : ata_piix Oct 1 21:21:13 Hilbert kernel: [ 0.713966] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 Oct 1 21:21:13 Hilbert kernel: [ 0.713969] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 Oct 1 21:21:13 Hilbert kernel: [ 0.714020] ata2: port disabled. ignoring. Oct 1 21:21:13 Hilbert kernel: [ 0.714275] Fixed MDIO Bus: probed Oct 1 21:21:13 Hilbert kernel: [ 0.714297] PPP generic driver version 2.4.2 Oct 1 21:21:13 Hilbert kernel: [ 0.714333] tun: Universal TUN/TAP device driver, 1.6 Oct 1 21:21:13 Hilbert kernel: [ 0.714335] tun: (C) 1999-2004 Max Krasnyansky Oct 1 21:21:13 Hilbert kernel: [ 0.714411] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Oct 1 21:21:13 Hilbert kernel: [ 0.714435] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 Oct 1 21:21:13 Hilbert kernel: [ 0.714449] ehci_hcd 0000:00:1a.7: setting latency timer to 64 Oct 1 21:21:13 Hilbert kernel: [ 0.714453] ehci_hcd 0000:00:1a.7: EHCI Host Controller Oct 1 21:21:13 Hilbert kernel: [ 0.714489] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 Oct 1 21:21:13 Hilbert kernel: [ 0.714524] ehci_hcd 0000:00:1a.7: debug port 1 Oct 1 21:21:13 Hilbert kernel: [ 0.718406] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported Oct 1 21:21:13 Hilbert kernel: [ 0.718423] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 Oct 1 21:21:13 Hilbert kernel: [ 0.740018] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 Oct 1 21:21:13 Hilbert kernel: [ 0.740122] hub 1-0:1.0: USB hub found Oct 1 21:21:13 Hilbert kernel: [ 0.740127] hub 1-0:1.0: 4 ports detected Oct 1 21:21:13 Hilbert kernel: [ 0.740201] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Oct 1 21:21:13 Hilbert kernel: [ 0.740215] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Oct 1 21:21:13 Hilbert kernel: [ 0.740218] ehci_hcd 0000:00:1d.7: EHCI Host Controller Oct 1 21:21:13 Hilbert kernel: [ 0.740254] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 Oct 1 21:21:13 Hilbert kernel: [ 0.740288] ehci_hcd 0000:00:1d.7: debug port 1 Oct 1 21:21:13 Hilbert kernel: [ 0.744164] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported Oct 1 21:21:13 Hilbert kernel: [ 0.744180] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 Oct 1 21:21:13 Hilbert kernel: [ 0.760017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Oct 1 21:21:13 Hilbert kernel: [ 0.760129] hub 2-0:1.0: USB hub found Oct 1 21:21:13 Hilbert kernel: [ 0.760133] hub 2-0:1.0: 6 ports detected Oct 1 21:21:13 Hilbert kernel: [ 0.760212] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Oct 1 21:21:13 Hilbert kernel: [ 0.760224] uhci_hcd: USB Universal Host Controller Interface driver Oct 1 21:21:13 Hilbert kernel: [ 0.760246] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Oct 1 21:21:13 Hilbert kernel: [ 0.760254] uhci_hcd 0000:00:1a.0: setting latency timer to 64 Oct 1 21:21:13 Hilbert kernel: [ 0.760257] uhci_hcd 0000:00:1a.0: UHCI Host Controller Oct 1 21:21:13 Hilbert kernel: [ 0.760287] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 Oct 1 21:21:13 Hilbert kernel: [ 0.760317] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 Oct 1 21:21:13 Hilbert kernel: [ 0.760433] hub 3-0:1.0: USB hub found Oct 1 21:21:13 Hilbert kernel: [ 0.760437] hub 3-0:1.0: 2 ports detected Oct 1 21:21:13 Hilbert kernel: [ 0.760503] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 Oct 1 21:21:13 Hilbert kernel: [ 0.760512] uhci_hcd 0000:00:1a.1: setting latency timer to 64 Oct 1 21:21:13 Hilbert kernel: [ 0.760516] uhci_hcd 0000:00:1a.1: UHCI Host Controller Oct 1 21:21:13 Hilbert kernel: [ 0.760545] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 Oct 1 21:21:13 Hilbert kernel: [ 0.760585] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 Oct 1 21:21:13 Hilbert kernel: [ 0.760709] hub 4-0:1.0: USB hub found Oct 1 21:21:13 Hilbert kernel: [ 0.760713] hub 4-0:1.0: 2 ports detected Oct 1 21:21:13 Hilbert kernel: [ 0.760775] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Oct 1 21:21:13 Hilbert kernel: [ 0.760781] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Oct 1 21:21:13 Hilbert kernel: [ 0.760785] uhci_hcd 0000:00:1d.0: UHCI Host Controller Oct 1 21:21:13 Hilbert kernel: [ 0.760817] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 Oct 1 21:21:13 Hilbert kernel: [ 0.760845] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 Oct 1 21:21:13 Hilbert kernel: [ 0.760955] hub 5-0:1.0: USB hub found Oct 1 21:21:13 Hilbert kernel: [ 0.760959] hub 5-0:1.0: 2 ports detected Oct 1 21:21:13 Hilbert kernel: [ 0.761020] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 Oct 1 21:21:13 Hilbert kernel: [ 0.761027] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Oct 1 21:21:13 Hilbert kernel: [ 0.761031] uhci_hcd 0000:00:1d.1: UHCI Host Controller Oct 1 21:21:13 Hilbert kernel: [ 0.761065] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 Oct 1 21:21:13 Hilbert kernel: [ 0.761094] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 Oct 1 21:21:13 Hilbert kernel: [ 0.761205] hub 6-0:1.0: USB hub found Oct 1 21:21:13 Hilbert kernel: [ 0.761209] hub 6-0:1.0: 2 ports detected Oct 1 21:21:13 Hilbert kernel: [ 0.761271] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 Oct 1 21:21:13 Hilbert kernel: [ 0.761278] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Oct 1 21:21:13 Hilbert kernel: [ 0.761282] uhci_hcd 0000:00:1d.2: UHCI Host Controller Oct 1 21:21:13 Hilbert kernel: [ 0.761319] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 Oct 1 21:21:13 Hilbert kernel: [ 0.761348] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 Oct 1 21:21:13 Hilbert kernel: [ 0.761459] hub 7-0:1.0: USB hub found Oct 1 21:21:13 Hilbert kernel: [ 0.761462] hub 7-0:1.0: 2 ports detected Oct 1 21:21:13 Hilbert kernel: [ 0.761563] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 Oct 1 21:21:13 Hilbert kernel: [ 0.764209] serio: i8042 KBD port at 0x60,0x64 irq 1 Oct 1 21:21:13 Hilbert kernel: [ 0.764216] serio: i8042 AUX port at 0x60,0x64 irq 12 Oct 1 21:21:13 Hilbert kernel: [ 0.764323] mousedev: PS/2 mouse device common for all mice Oct 1 21:21:13 Hilbert kernel: [ 0.764464] rtc_cmos 00:03: RTC can wake from S4 Oct 1 21:21:13 Hilbert kernel: [ 0.764581] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 Oct 1 21:21:13 Hilbert kernel: [ 0.764624] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs Oct 1 21:21:13 Hilbert kernel: [ 0.764719] device-mapper: uevent: version 1.0.3 Oct 1 21:21:13 Hilbert kernel: [ 0.764795] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com Oct 1 21:21:13 Hilbert kernel: [ 0.764857] cpuidle: using governor ladder Oct 1 21:21:13 Hilbert kernel: [ 0.764941] cpuidle: using governor menu Oct 1 21:21:13 Hilbert kernel: [ 0.764943] EFI Variables Facility v0.08 2004-May-17 Oct 1 21:21:13 Hilbert kernel: [ 0.765192] TCP cubic registered Oct 1 21:21:13 Hilbert kernel: [ 0.765308] NET: Registered protocol family 10 Oct 1 21:21:13 Hilbert kernel: [ 0.765773] NET: Registered protocol family 17 Oct 1 21:21:13 Hilbert kernel: [ 0.765790] Registering the dns_resolver key type Oct 1 21:21:13 Hilbert kernel: [ 0.765880] PM: Hibernation image not present or could not be loaded. Oct 1 21:21:13 Hilbert kernel: [ 0.765894] registered taskstats version 1 Oct 1 21:21:13 Hilbert kernel: [ 0.776310] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 Oct 1 21:21:13 Hilbert kernel: [ 0.778703] Magic number: 15:385:343 Oct 1 21:21:13 Hilbert kernel: [ 0.778745] tty tty60: hash matches Oct 1 21:21:13 Hilbert kernel: [ 0.778825] rtc_cmos 00:03: setting system clock to 2011-10-01 19:20:58 UTC (1317496858) Oct 1 21:21:13 Hilbert kernel: [ 0.781379] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found Oct 1 21:21:13 Hilbert kernel: [ 0.781382] EDD information not available. Oct 1 21:21:13 Hilbert kernel: [ 0.900538] ata1.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, D200, max UDMA/33 Oct 1 21:21:13 Hilbert kernel: [ 0.940488] ata1.00: configured for UDMA/33 Oct 1 21:21:13 Hilbert kernel: [ 0.947036] scsi 0:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632H D200 PQ: 0 ANSI: 5 Oct 1 21:21:13 Hilbert kernel: [ 0.953117] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Oct 1 21:21:13 Hilbert kernel: [ 0.953122] cdrom: Uniform CD-ROM driver Revision: 3.20 Oct 1 21:21:13 Hilbert kernel: [ 0.953279] sr 0:0:0:0: Attached scsi CD-ROM sr0 Oct 1 21:21:13 Hilbert kernel: [ 0.953370] sr 0:0:0:0: Attached scsi generic sg0 type 5 Oct 1 21:21:13 Hilbert kernel: [ 0.955102] Freeing unused kernel memory: 984k freed Oct 1 21:21:13 Hilbert kernel: [ 0.955429] Write protecting the kernel read-only data: 10240k Oct 1 21:21:13 Hilbert kernel: [ 0.955699] Freeing unused kernel memory: 20k freed Oct 1 21:21:13 Hilbert kernel: [ 0.960227] Freeing unused kernel memory: 1400k freed Oct 1 21:21:13 Hilbert kernel: [ 1.042221] ahci 0000:00:1f.2: version 3.0 Oct 1 21:21:13 Hilbert kernel: [ 1.042241] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Oct 1 21:21:13 Hilbert kernel: [ 1.042311] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X Oct 1 21:21:13 Hilbert kernel: [ 1.042392] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode Oct 1 21:21:13 Hilbert kernel: [ 1.042397] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems Oct 1 21:21:13 Hilbert kernel: [ 1.042403] ahci 0000:00:1f.2: setting latency timer to 64 Oct 1 21:21:13 Hilbert kernel: [ 1.058368] sdhci: Secure Digital Host Controller Interface driver Oct 1 21:21:13 Hilbert kernel: [ 1.058371] sdhci: Copyright(c) Pierre Ossman Oct 1 21:21:13 Hilbert kernel: [ 1.058609] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22) Oct 1 21:21:13 Hilbert kernel: [ 1.058638] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 Oct 1 21:21:13 Hilbert kernel: [ 1.060496] mmc0: no vmmc regulator found Oct 1 21:21:13 Hilbert kernel: [ 1.063986] scsi2 : ahci Oct 1 21:21:13 Hilbert kernel: [ 1.066506] scsi3 : ahci Oct 1 21:21:13 Hilbert kernel: [ 1.069123] scsi4 : ahci Oct 1 21:21:13 Hilbert kernel: [ 1.069287] ata3: SATA max UDMA/133 abar m2048@0xfebfb800 port 0xfebfb900 irq 44 Oct 1 21:21:13 Hilbert kernel: [ 1.069290] ata4: DUMMY Oct 1 21:21:13 Hilbert kernel: [ 1.069293] ata5: SATA max UDMA/133 abar m2048@0xfebfb800 port 0xfebfba00 irq 44 Oct 1 21:21:13 Hilbert kernel: [ 1.078100] Registered led device: mmc0:: Oct 1 21:21:13 Hilbert kernel: [ 1.079153] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA Oct 1 21:21:13 Hilbert kernel: [ 1.079212] b44 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Oct 1 21:21:13 Hilbert modem-manager[939]: Loaded plugin Gobi Oct 1 21:21:13 Hilbert modem-manager[939]: Loaded plugin MotoC Oct 1 21:21:13 Hilbert modem-manager[939]: Loaded plugin Huawei Oct 1 21:21:13 Hilbert modem-manager[939]: Loaded plugin Linktop Oct 1 21:21:13 Hilbert modem-manager[939]: Loaded plugin Nokia Oct 1 21:21:13 Hilbert modem-manager[939]: Loaded plugin ZTE Oct 1 21:21:13 Hilbert modem-manager[939]: Loaded plugin SimTech Oct 1 21:21:13 Hilbert modem-manager[939]: Loaded plugin Option Oct 1 21:21:13 Hilbert modem-manager[939]: Loaded plugin Longcheer Oct 1 21:21:13 Hilbert modem-manager[939]: Loaded plugin Ericsson MBM Oct 1 21:21:13 Hilbert modem-manager[939]: Loaded plugin Option High-Speed Oct 1 21:21:13 Hilbert modem-manager[939]: Loaded plugin X22X Oct 1 21:21:13 Hilbert modem-manager[939]: Loaded plugin Generic Oct 1 21:21:13 Hilbert modem-manager[939]: Loaded plugin Novatel Oct 1 21:21:13 Hilbert modem-manager[939]: Loaded plugin Samsung Oct 1 21:21:13 Hilbert modem-manager[939]: Loaded plugin Sierra Oct 1 21:21:13 Hilbert modem-manager[939]: Loaded plugin AnyData Oct 1 21:21:13 Hilbert modem-manager[939]: Loaded plugin Wavecom Oct 1 21:21:13 Hilbert kernel: [ 1.110234] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) Oct 1 21:21:13 Hilbert kernel: [ 1.110242] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) Oct 1 21:21:13 Hilbert kernel: [ 1.110250] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) Oct 1 21:21:13 Hilbert kernel: [ 1.180185] usb 2-6: new high speed USB device number 2 using ehci_hcd Oct 1 21:21:13 Hilbert kernel: [ 1.210876] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 Oct 1 21:21:13 Hilbert kernel: [ 1.210898] b44: b44.c:v2.0 Oct 1 21:21:13 Hilbert kernel: [ 1.250835] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:1d:09:a8:97:4c Oct 1 21:21:13 Hilbert kernel: [ 1.410183] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 1 21:21:13 Hilbert kernel: [ 1.410219] ata5: SATA link down (SStatus 0 SControl 300) Oct 1 21:21:13 Hilbert kernel: [ 1.411456] ata3.00: ATA-7: ST9200420AS, 3.ADC, max UDMA/133 Oct 1 21:21:13 Hilbert kernel: [ 1.411461] ata3.00: 390721968 sectors, multi 8: LBA48 NCQ (depth 31/32) Oct 1 21:21:13 Hilbert kernel: [ 1.412994] ata3.00: configured for UDMA/133 Oct 1 21:21:13 Hilbert kernel: [ 1.413201] scsi 2:0:0:0: Direct-Access ATA ST9200420AS 3.AD PQ: 0 ANSI: 5 Oct 1 21:21:13 Hilbert kernel: [ 1.413360] sd 2:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB) Oct 1 21:21:13 Hilbert kernel: [ 1.413363] sd 2:0:0:0: Attached scsi generic sg1 type 0 Oct 1 21:21:13 Hilbert kernel: [ 1.413443] sd 2:0:0:0: [sda] Write Protect is off Oct 1 21:21:13 Hilbert kernel: [ 1.413446] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 Oct 1 21:21:13 Hilbert kernel: [ 1.413468] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 1 21:21:13 Hilbert kernel: [ 1.449272] sda: sda1 sda2 sda3 < sda5 > Oct 1 21:21:13 Hilbert kernel: [ 1.449661] sd 2:0:0:0: [sda] Attached SCSI disk Oct 1 21:21:13 Hilbert kernel: [ 1.450573] firewire_ohci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 Oct 1 21:21:13 Hilbert kernel: [ 1.530147] firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1 Oct 1 21:21:13 Hilbert kernel: [ 1.620084] usb 3-2: new full speed USB device number 2 using uhci_hcd Oct 1 21:21:13 Hilbert kernel: [ 1.806465] hub 3-2:1.0: USB hub found Oct 1 21:21:13 Hilbert kernel: [ 1.808407] hub 3-2:1.0: 3 ports detected Oct 1 21:21:13 Hilbert kernel: [ 1.838738] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) Oct 1 21:21:13 Hilbert kernel: [ 2.030200] firewire_core: created device fw0: GUID 484fc000188ba470, S400 Oct 1 21:21:13 Hilbert kernel: [ 2.101440] usb 3-2.1: new full speed USB device number 3 using uhci_hcd Oct 1 21:21:13 Hilbert kernel: [ 2.311445] usb 3-2.2: new full speed USB device number 4 using uhci_hcd Oct 1 21:21:13 Hilbert kernel: [ 2.531450] usb 3-2.3: new full speed USB device number 5 using uhci_hcd Oct 1 21:21:13 Hilbert kernel: [ 13.023883] lp: driver loaded but no devices found Oct 1 21:21:13 Hilbert kernel: [ 13.107816] wmi: Mapper loaded Oct 1 21:21:13 Hilbert kernel: [ 13.128441] Adding 1950716k swap on /dev/sda5. Priority:-1 extents:1 across:1950716k Oct 1 21:21:13 Hilbert kernel: [ 13.165100] cfg80211: Calling CRDA to update world regulatory domain Oct 1 21:21:13 Hilbert kernel: [ 13.208536] nvidia: module license 'NVIDIA' taints kernel. Oct 1 21:21:13 Hilbert kernel: [ 13.208540] Disabling lock debugging due to kernel taint Oct 1 21:21:13 Hilbert kernel: [ 13.303441] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s Oct 1 21:21:13 Hilbert kernel: [ 13.303444] iwl3945: Copyright(c) 2003-2011 Intel Corporation Oct 1 21:21:13 Hilbert kernel: [ 13.303519] iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Oct 1 21:21:13 Hilbert kernel: [ 13.303534] iwl3945 0000:0c:00.0: setting latency timer to 64 Oct 1 21:21:13 Hilbert kernel: [ 13.400037] r852 0000:03:01.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 Oct 1 21:21:13 Hilbert kernel: [ 13.405419] r852: driver loaded successfully Oct 1 21:21:13 Hilbert kernel: [ 13.405459] acpi device:31: registered as cooling_device2 Oct 1 21:21:13 Hilbert kernel: [ 13.424066] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2e/LNXVIDEO:00/input/input4 Oct 1 21:21:13 Hilbert kernel: [ 13.424161] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) Oct 1 21:21:13 Hilbert kernel: [ 13.424218] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. Oct 1 21:21:13 Hilbert kernel: [ 13.429690] Bluetooth: Core ver 2.16 Oct 1 21:21:13 Hilbert kernel: [ 13.429738] NET: Registered protocol family 31 Oct 1 21:21:13 Hilbert kernel: [ 13.429740] Bluetooth: HCI device and connection manager initialized Oct 1 21:21:13 Hilbert kernel: [ 13.429743] Bluetooth: HCI socket layer initialized Oct 1 21:21:13 Hilbert kernel: [ 13.429745] Bluetooth: L2CAP socket layer initialized Oct 1 21:21:13 Hilbert kernel: [ 13.435632] Bluetooth: SCO socket layer initialized Oct 1 21:21:13 Hilbert kernel: [ 13.443391] Bluetooth: Generic Bluetooth USB driver ver 0.6 Oct 1 21:21:13 Hilbert kernel: [ 13.457375] usbcore: registered new interface driver btusb Oct 1 21:21:13 Hilbert kernel: [ 13.479595] type=1400 audit(1317496871.185:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=641 comm="apparmor_parser" Oct 1 21:21:13 Hilbert kernel: [ 13.479866] type=1400 audit(1317496871.185:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=641 comm="apparmor_parser" Oct 1 21:21:13 Hilbert kernel: [ 13.480066] type=1400 audit(1317496871.195:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=641 comm="apparmor_parser" Oct 1 21:21:13 Hilbert kernel: [ 13.564246] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) Oct 1 21:21:13 Hilbert kernel: [ 13.724070] input: Dell WMI hotkeys as /devices/virtual/input/input5 Oct 1 21:21:13 Hilbert kernel: [ 13.735404] cfg80211: World regulatory domain updated: Oct 1 21:21:13 Hilbert kernel: [ 13.735408] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Oct 1 21:21:13 Hilbert kernel: [ 13.735411] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 1 21:21:13 Hilbert kernel: [ 13.735414] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 1 21:21:13 Hilbert kernel: [ 13.735417] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 1 21:21:13 Hilbert kernel: [ 13.735419] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 1 21:21:13 Hilbert kernel: [ 13.735422] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 1 21:21:13 Hilbert kernel: [ 13.756179] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 Oct 1 21:21:13 Hilbert kernel: [ 13.756245] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X Oct 1 21:21:13 Hilbert kernel: [ 13.756278] HDA Intel 0000:00:1b.0: setting latency timer to 64 Oct 1 21:21:13 Hilbert kernel: [ 13.759301] iwl3945 0000:0c:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels Oct 1 21:21:13 Hilbert kernel: [ 13.759305] iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG Oct 1 21:21:13 Hilbert kernel: [ 13.759453] iwl3945 0000:0c:00.0: irq 46 for MSI/MSI-X Oct 1 21:21:13 Hilbert kernel: [ 13.762691] Registered led device: phy0-led Oct 1 21:21:13 Hilbert kernel: [ 13.762760] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain Oct 1 21:21:13 Hilbert kernel: [ 13.767966] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs' Oct 1 21:21:13 Hilbert kernel: [ 13.900566] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 Oct 1 21:21:13 Hilbert kernel: [ 13.900757] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 Oct 1 21:21:13 Hilbert kernel: [ 13.957784] Linux video capture interface: v2.00 Oct 1 21:21:13 Hilbert kernel: [ 13.959043] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640) Oct 1 21:21:13 Hilbert kernel: [ 13.959418] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. Oct 1 21:21:13 Hilbert kernel: [ 13.962458] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input8 Oct 1 21:21:13 Hilbert kernel: [ 13.962649] generic-usb 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0 Oct 1 21:21:13 Hilbert kernel: [ 13.962932] input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input9 Oct 1 21:21:13 Hilbert kernel: [ 13.963514] usbcore: registered new interface driver uvcvideo Oct 1 21:21:13 Hilbert kernel: [ 13.963517] USB Video Class driver (v1.1.0) Oct 1 21:21:13 Hilbert kernel: [ 13.968228] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input10 Oct 1 21:21:13 Hilbert kernel: [ 13.968480] generic-usb 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0 Oct 1 21:21:13 Hilbert kernel: [ 13.969000] usbcore: registered new interface driver usbhid Oct 1 21:21:13 Hilbert kernel: [ 13.969003] usbhid: USB HID core driver Oct 1 21:21:13 Hilbert kernel: [ 14.044586] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Oct 1 21:21:13 Hilbert kernel: [ 14.044598] nvidia 0000:01:00.0: setting latency timer to 64 Oct 1 21:21:13 Hilbert kernel: [ 14.044604] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem Oct 1 21:21:13 Hilbert kernel: [ 14.044753] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 280.13 Wed Jul 27 16:53:56 PDT 2011 Oct 1 21:21:13 Hilbert kernel: [ 14.259804] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04793/0x300000/0x0 Oct 1 21:21:13 Hilbert kernel: [ 14.259814] serio: Synaptics pass-through port at isa0060/serio1/input0 Oct 1 21:21:13 Hilbert kernel: [ 14.301108] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11 Oct 1 21:21:13 Hilbert kernel: [ 14.302138] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro Oct 1 21:21:13 Hilbert kernel: [ 14.390701] init: udev-fallback-graphics main process (863) terminated with status 1 Oct 1 21:21:13 Hilbert kernel: [ 14.567752] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) Oct 1 21:21:13 Hilbert kernel: [ 16.064932] ppdev: user-space parallel port driver Oct 1 21:21:13 Hilbert kernel: [ 16.073153] type=1400 audit(1317496873.785:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=955 comm="apparmor_parser" Oct 1 21:21:13 Hilbert kernel: [ 16.080978] type=1400 audit(1317496873.795:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=955 comm="apparmor_parser" Oct 1 21:21:13 Hilbert kernel: [ 16.086622] type=1400 audit(1317496873.795:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=965 comm="apparmor_parser" Oct 1 21:21:13 Hilbert kernel: [ 16.090451] type=1400 audit(1317496873.805:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=965 comm="apparmor_parser" Oct 1 21:21:13 Hilbert kernel: [ 16.090626] type=1400 audit(1317496873.805:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=965 comm="apparmor_parser" Oct 1 21:21:13 Hilbert kernel: [ 16.091815] type=1400 audit(1317496873.805:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=964 comm="apparmor_parser" Oct 1 21:21:13 Hilbert kernel: [ 16.107478] type=1400 audit(1317496873.815:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=967 comm="apparmor_parser" Oct 1 21:21:13 Hilbert NetworkManager[944]: VPN: loaded org.freedesktop.NetworkManager.pptp Oct 1 21:21:13 Hilbert NetworkManager[944]: SCPlugin-Ifupdown: init! Oct 1 21:21:13 Hilbert NetworkManager[944]: SCPlugin-Ifupdown: update_system_hostname Oct 1 21:21:13 Hilbert NetworkManager[944]: SCPluginIfupdown: management mode: unmanaged Oct 1 21:21:13 Hilbert NetworkManager[944]: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/net/wlan0, iface: wlan0) Oct 1 21:21:13 Hilbert NetworkManager[944]: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/net/wlan0, iface: wlan0): no ifupdown configuration found. Oct 1 21:21:13 Hilbert NetworkManager[944]: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1e.0/0000:03:00.0/ssb0:0/net/eth0, iface: eth0) Oct 1 21:21:13 Hilbert NetworkManager[944]: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1e.0/0000:03:00.0/ssb0:0/net/eth0, iface: eth0): no ifupdown configuration found. Oct 1 21:21:13 Hilbert NetworkManager[944]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo) Oct 1 21:21:13 Hilbert NetworkManager[944]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found. Oct 1 21:21:13 Hilbert NetworkManager[944]: SCPlugin-Ifupdown: end _init. Oct 1 21:21:13 Hilbert NetworkManager[944]: Loaded plugin ifupdown: (C) 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list. Oct 1 21:21:13 Hilbert NetworkManager[944]: Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list. Oct 1 21:21:13 Hilbert NetworkManager[944]: Ifupdown: get unmanaged devices count: 0 Oct 1 21:21:13 Hilbert NetworkManager[944]: SCPlugin-Ifupdown: (9180976) ... get_connections. Oct 1 21:21:13 Hilbert NetworkManager[944]: SCPlugin-Ifupdown: (9180976) ... get_connections (managed=false): return empty list. Oct 1 21:21:13 Hilbert NetworkManager[944]: keyfile: parsing Condivisa ... Oct 1 21:21:13 Hilbert NetworkManager[944]: keyfile: read connection 'Condivisa' Oct 1 21:21:13 Hilbert NetworkManager[944]: keyfile: parsing Alice-37768910 ... Oct 1 21:21:13 Hilbert NetworkManager[944]: keyfile: read connection 'Alice-37768910' Oct 1 21:21:13 Hilbert NetworkManager[944]: keyfile: parsing Cavo ... Oct 1 21:21:13 Hilbert NetworkManager[944]: keyfile: read connection 'Cavo' Oct 1 21:21:13 Hilbert NetworkManager[944]: Ifupdown: get unmanaged devices count: 0 Oct 1 21:21:13 Hilbert NetworkManager[944]: modem-manager is now available Oct 1 21:21:13 Hilbert NetworkManager[944]: monitoring kernel firmware directory '/lib/firmware'. Oct 1 21:21:13 Hilbert NetworkManager[944]: found WiFi radio killswitch rfkill3 (at /sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/ieee80211/phy0/rfkill3) (driver (unknown)) Oct 1 21:21:13 Hilbert NetworkManager[944]: found WiFi radio killswitch rfkill1 (at /sys/devices/platform/dell-laptop/rfkill/rfkill1) (driver dell-laptop) Oct 1 21:21:13 Hilbert NetworkManager[944]: WiFi enabled by radio killswitch; enabled by state file Oct 1 21:21:13 Hilbert NetworkManager[944]: WWAN enabled by radio killswitch; enabled by state file Oct 1 21:21:13 Hilbert NetworkManager[944]: WiMAX enabled by radio killswitch; enabled by state file Oct 1 21:21:13 Hilbert NetworkManager[944]: Networking is enabled by state file Oct 1 21:21:13 Hilbert NetworkManager[944]: (wlan0): driver supports SSID scans (scan_capa 0x01). Oct 1 21:21:13 Hilbert NetworkManager[944]: (wlan0): new 802.11 WiFi device (driver: 'iwl3945' ifindex: 3) Oct 1 21:21:13 Hilbert NetworkManager[944]: (wlan0): exported as /org/freedesktop/NetworkManager/Devices/0 Oct 1 21:21:13 Hilbert NetworkManager[944]: (wlan0): now managed Oct 1 21:21:13 Hilbert NetworkManager[944]: (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Oct 1 21:21:13 Hilbert NetworkManager[944]: (wlan0): bringing up device. Oct 1 21:21:13 Hilbert kernel: [ 16.207172] iwl3945 0000:0c:00.0: loaded firmware version 15.32.2.9 Oct 1 21:21:14 Hilbert NetworkManager[944]: (wlan0): preparing device. Oct 1 21:21:14 Hilbert NetworkManager[944]: (wlan0): deactivating device (reason 'managed') [2] Oct 1 21:21:14 Hilbert NetworkManager[944]: (eth0): carrier is OFF Oct 1 21:21:14 Hilbert NetworkManager[944]: (eth0): new Ethernet device (driver: 'b44' ifindex: 2) Oct 1 21:21:14 Hilbert NetworkManager[944]: (eth0): exported as /org/freedesktop/NetworkManager/Devices/1 Oct 1 21:21:14 Hilbert NetworkManager[944]: (eth0): now managed Oct 1 21:21:14 Hilbert NetworkManager[944]: (eth0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Oct 1 21:21:14 Hilbert NetworkManager[944]: (eth0): bringing up device. Oct 1 21:21:14 Hilbert NetworkManager[944]: (eth0): preparing device. Oct 1 21:21:14 Hilbert kernel: [ 16.290064] ADDRCONF(NETDEV_UP): wlan0: link is not ready Oct 1 21:21:14 Hilbert kernel: [ 16.296940] ADDRCONF(NETDEV_UP): eth0: link is not ready Oct 1 21:21:14 Hilbert NetworkManager[944]: (eth0): deactivating device (reason 'managed') [2] Oct 1 21:21:14 Hilbert NetworkManager[944]: bluez error getting default adapter: The name org.bluez was not provided by any .service files Oct 1 21:21:14 Hilbert NetworkManager[944]: wpa_supplicant started Oct 1 21:21:14 Hilbert NetworkManager[944]: (wlan0): supplicant interface state: starting -> ready Oct 1 21:21:14 Hilbert NetworkManager[944]: (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42] Oct 1 21:21:14 Hilbert NetworkManager[944]: (wlan0): supplicant interface state: ready -> inactive Oct 1 21:21:14 Hilbert NetworkManager[944]: bluez error getting default adapter: No such adapter Oct 1 21:21:14 Hilbert kernel: [ 16.603384] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Oct 1 21:21:14 Hilbert kernel: [ 16.603388] Bluetooth: BNEP filters: protocol multicast Oct 1 21:21:14 Hilbert kernel: [ 16.606960] Bluetooth: RFCOMM TTY layer initialized Oct 1 21:21:14 Hilbert kernel: [ 16.606969] Bluetooth: RFCOMM socket layer initialized Oct 1 21:21:14 Hilbert kernel: [ 16.606971] Bluetooth: RFCOMM ver 1.11 Oct 1 21:21:15 Hilbert kernel: [ 17.324548] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600 Oct 1 21:21:15 Hilbert kernel: [ 17.412890] EXT4-fs (sda2): re-mounted. Opts: commit=600 Oct 1 21:21:18 Hilbert kernel: [ 20.522744] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600 Oct 1 21:21:18 Hilbert kernel: [ 20.803728] EXT4-fs (sda2): re-mounted. Opts: commit=600 Oct 1 21:21:18 Hilbert NetworkManager[944]: Auto-activating connection 'Alice-37768910'. Oct 1 21:21:18 Hilbert NetworkManager[944]: Activation (wlan0) starting connection 'Alice-37768910' Oct 1 21:21:18 Hilbert NetworkManager[944]: (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0] Oct 1 21:21:18 Hilbert NetworkManager[944]: Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled... Oct 1 21:21:18 Hilbert NetworkManager[944]: Activation (wlan0) Stage 1 of 5 (Device Prepare) started... Oct 1 21:21:18 Hilbert NetworkManager[944]: Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled... Oct 1 21:21:18 Hilbert NetworkManager[944]: Activation (wlan0) Stage 1 of 5 (Device Prepare) complete. Oct 1 21:21:18 Hilbert NetworkManager[944]: Activation (wlan0) Stage 2 of 5 (Device Configure) starting... Oct 1 21:21:18 Hilbert NetworkManager[944]: (wlan0): device state change: prepare -> config (reason 'none') [40 50 0] Oct 1 21:21:18 Hilbert NetworkManager[944]: Activation (wlan0/wireless): connection 'Alice-37768910' has security, and secrets exist. No new secrets needed. Oct 1 21:21:18 Hilbert NetworkManager[944]: Config: added 'ssid' value 'Alice-37768910' Oct 1 21:21:18 Hilbert NetworkManager[944]: Config: added 'scan_ssid' value '1' Oct 1 21:21:18 Hilbert NetworkManager[944]: Config: added 'key_mgmt' value 'WPA-PSK' Oct 1 21:21:18 Hilbert NetworkManager[944]: Config: added 'psk' value '' Oct 1 21:21:18 Hilbert NetworkManager[944]: Activation (wlan0) Stage 2 of 5 (Device Configure) complete. Oct 1 21:21:18 Hilbert NetworkManager[944]: Config: set interface ap_scan to 1 Oct 1 21:21:18 Hilbert NetworkManager[944]: (wlan0): supplicant interface state: inactive -> scanning Oct 1 21:21:22 Hilbert wpa_supplicant[1075]: Trying to authenticate with 00:23:8e:4b:11:70 (SSID='Alice-37768910' freq=2412 MHz) Oct 1 21:21:22 Hilbert wpa_supplicant[1075]: Trying to associate with 00:23:8e:4b:11:70 (SSID='Alice-37768910' freq=2412 MHz) Oct 1 21:21:22 Hilbert NetworkManager[944]: (wlan0): supplicant interface state: scanning -> associating Oct 1 21:21:22 Hilbert wpa_supplicant[1075]: Associated with 00:23:8e:4b:11:70 Oct 1 21:21:22 Hilbert kernel: [ 24.642552] wlan0: authenticate with 00:23:8e:4b:11:70 (try 1) Oct 1 21:21:22 Hilbert kernel: [ 24.644473] wlan0: authenticated Oct 1 21:21:22 Hilbert kernel: [ 24.644649] wlan0: associate with 00:23:8e:4b:11:70 (try 1) Oct 1 21:21:22 Hilbert kernel: [ 24.647162] wlan0: RX AssocResp from 00:23:8e:4b:11:70 (capab=0x411 status=0 aid=1) Oct 1 21:21:22 Hilbert kernel: [ 24.647168] wlan0: associated Oct 1 21:21:22 Hilbert kernel: [ 24.648996] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Oct 1 21:21:22 Hilbert NetworkManager[944]: (wlan0): supplicant interface state: associating -> 4-way handshake Oct 1 21:21:22 Hilbert NetworkManager[944]: (wlan0): supplicant interface state: 4-way handshake -> group handshake Oct 1 21:21:22 Hilbert wpa_supplicant[1075]: WPA: Key negotiation completed with 00:23:8e:4b:11:70 [PTK=TKIP GTK=TKIP] Oct 1 21:21:22 Hilbert wpa_supplicant[1075]: CTRL-EVENT-CONNECTED - Connection to 00:23:8e:4b:11:70 completed (auth) [id=0 id_str=] Oct 1 21:21:22 Hilbert NetworkManager[944]: (wlan0): supplicant interface state: group handshake -> completed Oct 1 21:21:22 Hilbert NetworkManager[944]: Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Alice-37768910'. Oct 1 21:21:22 Hilbert NetworkManager[944]: Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled. Oct 1 21:21:22 Hilbert NetworkManager[944]: Activation (wlan0) Stage 3 of 5 (IP Configure Start) started... Oct 1 21:21:22 Hilbert NetworkManager[944]: (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0] Oct 1 21:21:22 Hilbert NetworkManager[944]: Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds) Oct 1 21:21:22 Hilbert NetworkManager[944]: dhclient started with pid 1537 Oct 1 21:21:22 Hilbert NetworkManager[944]: Activation (wlan0) Beginning IP6 addrconf. Oct 1 21:21:22 Hilbert NetworkManager[944]: Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete. Oct 1 21:21:22 Hilbert dhclient: Internet Systems Consortium DHCP Client 4.1.1-P1 Oct 1 21:21:22 Hilbert dhclient: Copyright 2004-2010 Internet Systems Consortium. Oct 1 21:21:22 Hilbert dhclient: All rights reserved. Oct 1 21:21:22 Hilbert dhclient: For info, please visit https://www.isc.org/software/dhcp/ Oct 1 21:21:22 Hilbert dhclient: Oct 1 21:21:22 Hilbert NetworkManager[944]: (wlan0): DHCPv4 state changed nbi -> preinit Oct 1 21:21:22 Hilbert dhclient: Listening on LPF/wlan0/00:1c:bf:61:5f:35 Oct 1 21:21:22 Hilbert dhclient: Sending on LPF/wlan0/00:1c:bf:61:5f:35 Oct 1 21:21:22 Hilbert dhclient: Sending on Socket/fallback Oct 1 21:21:22 Hilbert dhclient: DHCPREQUEST of 192.168.1.170 on wlan0 to 255.255.255.255 port 67 Oct 1 21:21:22 Hilbert dhclient: DHCPNAK from 192.168.1.1 Oct 1 21:21:22 Hilbert NetworkManager[944]: (wlan0): DHCPv4 state changed preinit -> expire Oct 1 21:21:22 Hilbert dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 3 Oct 1 21:21:22 Hilbert NetworkManager[944]: (wlan0): DHCPv4 state changed expire -> preinit Oct 1 21:21:24 Hilbert dhclient: DHCPOFFER of 192.168.1.170 from 192.168.1.1 Oct 1 21:21:24 Hilbert dhclient: DHCPREQUEST of 192.168.1.170 on wlan0 to 255.255.255.255 port 67 Oct 1 21:21:24 Hilbert dhclient: DHCPACK of 192.168.1.170 from 192.168.1.1 Oct 1 21:21:24 Hilbert dhclient: bound to 192.168.1.170 -- renewal in 8475 seconds. Oct 1 21:21:24 Hilbert NetworkManager[944]: (wlan0): DHCPv4 state changed preinit -> bound Oct 1 21:21:24 Hilbert NetworkManager[944]: Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled... Oct 1 21:21:24 Hilbert NetworkManager[944]: Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started... Oct 1 21:21:24 Hilbert NetworkManager[944]: address 192.168.1.170 Oct 1 21:21:24 Hilbert NetworkManager[944]: prefix 24 (255.255.255.0) Oct 1 21:21:24 Hilbert NetworkManager[944]: gateway 192.168.1.1 Oct 1 21:21:24 Hilbert NetworkManager[944]: hostname 'Hilbert' Oct 1 21:21:24 Hilbert NetworkManager[944]: nameserver '192.168.1.1' Oct 1 21:21:24 Hilbert NetworkManager[944]: domain name 'homenet.telecomitalia.it' Oct 1 21:21:24 Hilbert NetworkManager[944]: Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started... Oct 1 21:21:25 Hilbert NetworkManager[944]: (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0] Oct 1 21:21:25 Hilbert NetworkManager[944]: Policy set 'Alice-37768910' (wlan0) as default for IPv4 routing and DNS. Oct 1 21:21:25 Hilbert NetworkManager[944]: Activation (wlan0) successful, device activated. Oct 1 21:21:25 Hilbert NetworkManager[944]: Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete. Oct 1 21:21:25 Hilbert NetworkManager[944]: Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete. Oct 1 21:21:32 Hilbert kernel: [ 34.970237] wlan0: no IPv6 routers present Oct 1 21:21:42 Hilbert NetworkManager[944]: (wlan0): IP6 addrconf timed out or failed. Oct 1 21:21:42 Hilbert NetworkManager[944]: Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) scheduled... Oct 1 21:21:42 Hilbert NetworkManager[944]: Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) started... Oct 1 21:21:42 Hilbert NetworkManager[944]: Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started... Oct 1 21:21:42 Hilbert NetworkManager[944]: Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete. Oct 1 21:21:42 Hilbert NetworkManager[944]: Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) complete. Oct 1 21:21:47 Hilbert kernel: [ 49.623485] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled Oct 1 21:21:47 Hilbert kernel: [ 49.624070] SGI XFS Quota Management subsystem Oct 1 21:21:47 Hilbert kernel: [ 49.641287] JFS: nTxBlock = 8192, nTxLock = 65536 Oct 1 21:21:47 Hilbert kernel: [ 49.672325] NTFS driver 2.1.30 [Flags: R/O MODULE]. Oct 1 21:21:47 Hilbert kernel: [ 49.716732] QNX4 filesystem 0.2.3 registered. Oct 1 21:21:47 Hilbert kernel: [ 49.775184] Btrfs loaded Oct 1 21:22:13 Hilbert kernel: Kernel logging (proc) stopped. Oct 1 21:23:30 Hilbert kernel: imklog 5.8.1, log source = /proc/kmsg started. Oct 1 21:23:30 Hilbert kernel: [ 0.000000] Initializing cgroup subsys cpuset Oct 1 21:23:30 Hilbert kernel: [ 0.000000] Initializing cgroup subsys cpu Oct 1 21:23:30 Hilbert kernel: [ 0.000000] Linux version 3.0.0-11-generic (buildd@crested) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu2) ) #18-Ubuntu SMP Tue Sep 13 23:38:01 UTC 2011 (Ubuntu 3.0.0-11.18-generic 3.0.4) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-11-generic root=UUID=c49615ed-88be-4cff-812e-d4389247f03d ro quiet splash vt.handoff=7 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] KERNEL supported cpus: Oct 1 21:23:30 Hilbert kernel: [ 0.000000] Intel GenuineIntel Oct 1 21:23:30 Hilbert kernel: [ 0.000000] AMD AuthenticAMD Oct 1 21:23:30 Hilbert kernel: [ 0.000000] Centaur CentaurHauls Oct 1 21:23:30 Hilbert kernel: [ 0.000000] BIOS-provided physical RAM map: Oct 1 21:23:30 Hilbert kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe6d800 (usable) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] BIOS-e820: 000000007fe6d800 - 0000000080000000 (reserved) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] NX (Execute Disable) protection: active Oct 1 21:23:30 Hilbert kernel: [ 0.000000] DMI 2.4 present. Oct 1 21:23:30 Hilbert kernel: [ 0.000000] DMI: Dell Inc. Inspiron 1520 /0KY768, BIOS A04 11/05/2007 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] No AGP bridge found Oct 1 21:23:30 Hilbert kernel: [ 0.000000] last_pfn = 0x7fe6d max_arch_pfn = 0x400000000 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] MTRR default type: uncachable Oct 1 21:23:30 Hilbert kernel: [ 0.000000] MTRR fixed ranges enabled: Oct 1 21:23:30 Hilbert kernel: [ 0.000000] 00000-9FFFF write-back Oct 1 21:23:30 Hilbert kernel: [ 0.000000] A0000-BFFFF uncachable Oct 1 21:23:30 Hilbert kernel: [ 0.000000] C0000-CFFFF write-protect Oct 1 21:23:30 Hilbert kernel: [ 0.000000] D0000-EFFFF uncachable Oct 1 21:23:30 Hilbert kernel: [ 0.000000] F0000-FFFFF write-protect Oct 1 21:23:30 Hilbert kernel: [ 0.000000] MTRR variable ranges enabled: Oct 1 21:23:30 Hilbert kernel: [ 0.000000] 0 base 000000000 mask F80000000 write-back Oct 1 21:23:30 Hilbert kernel: [ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable Oct 1 21:23:30 Hilbert kernel: [ 0.000000] 2 disabled Oct 1 21:23:30 Hilbert kernel: [ 0.000000] 3 disabled Oct 1 21:23:30 Hilbert kernel: [ 0.000000] 4 disabled Oct 1 21:23:30 Hilbert kernel: [ 0.000000] 5 disabled Oct 1 21:23:30 Hilbert kernel: [ 0.000000] 6 disabled Oct 1 21:23:30 Hilbert kernel: [ 0.000000] 7 disabled Oct 1 21:23:30 Hilbert kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] original variable MTRRs Oct 1 21:23:30 Hilbert kernel: [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB Oct 1 21:23:30 Hilbert kernel: [ 0.000000] reg 1, base: 2047MB, range: 1MB, type UC Oct 1 21:23:30 Hilbert kernel: [ 0.000000] total RAM covered: 2047M Oct 1 21:23:30 Hilbert kernel: [ 0.000000] Found optimal setting for mtrr clean up Oct 1 21:23:30 Hilbert kernel: [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 2 lose cover RAM: 0G Oct 1 21:23:30 Hilbert kernel: [ 0.000000] New variable MTRRs Oct 1 21:23:30 Hilbert kernel: [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB Oct 1 21:23:30 Hilbert kernel: [ 0.000000] reg 1, base: 2047MB, range: 1MB, type UC Oct 1 21:23:30 Hilbert kernel: [ 0.000000] initial memory mapped : 0 - 20000000 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] init_memory_mapping: 0000000000000000-000000007fe6d000 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] 0000000000 - 007fe00000 page 2M Oct 1 21:23:30 Hilbert kernel: [ 0.000000] 007fe00000 - 007fe6d000 page 4k Oct 1 21:23:30 Hilbert kernel: [ 0.000000] kernel direct mapping tables up to 7fe6d000 @ 7fe69000-7fe6d000 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] RAMDISK: 365bc000 - 372d6000 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] ACPI: RSDP 00000000000fbbf0 00024 (v02 DELL ) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] ACPI: XSDT 000000007fe6f200 0005C (v01 DELL M08 27D70B05 ASL 00000061) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] ACPI: FACP 000000007fe6f09c 000F4 (v04 DELL M08 27D70B05 ASL 00000061) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] ACPI: DSDT 000000007fe6f800 0565E (v02 INT430 SYSFexxx 00001001 INTL 20050624) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] ACPI: FACS 000000007fe7e000 00040 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] ACPI: HPET 000000007fe6f300 00038 (v01 DELL M08 00000001 ASL 00000061) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] ACPI: APIC 000000007fe6f400 00068 (v01 DELL M08 27D70B05 ASL 00000047) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] ACPI: MCFG 000000007fe6f3c0 0003E (v16 DELL M08 27D70B05 ASL 00000061) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] ACPI: SLIC 000000007fe6f49c 00176 (v01 DELL M08 27D70B05 ASL 00000061) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] ACPI: BOOT 000000007fe6efc0 00028 (v01 DELL M08 27D70B05 ASL 00000061) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] ACPI: SSDT 000000007fe6d9bc 004CC (v01 PmRef CpuPm 00003000 INTL 20050624) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] No NUMA configuration found Oct 1 21:23:30 Hilbert kernel: [ 0.000000] Faking a node at 0000000000000000-000000007fe6d000 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] Initmem setup node 0 0000000000000000-000000007fe6d000 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] NODE_DATA [000000007fe64000 - 000000007fe68fff] Oct 1 21:23:30 Hilbert kernel: [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] Zone PFN ranges: Oct 1 21:23:30 Hilbert kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] Normal empty Oct 1 21:23:30 Hilbert kernel: [ 0.000000] Movable zone start PFN for each node Oct 1 21:23:30 Hilbert kernel: [ 0.000000] early_node_map[2] active PFN ranges Oct 1 21:23:30 Hilbert kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f Oct 1 21:23:30 Hilbert kernel: [ 0.000000] 0: 0x00000100 -> 0x0007fe6d Oct 1 21:23:30 Hilbert kernel: [ 0.000000] On node 0 totalpages: 523772 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] DMA zone: 56 pages used for memmap Oct 1 21:23:30 Hilbert kernel: [ 0.000000] DMA zone: 5 pages reserved Oct 1 21:23:30 Hilbert kernel: [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] DMA32 zone: 7107 pages used for memmap Oct 1 21:23:30 Hilbert kernel: [ 0.000000] DMA32 zone: 512682 pages, LIFO batch:31 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] ACPI: IRQ0 used by override. Oct 1 21:23:30 Hilbert kernel: [ 0.000000] ACPI: IRQ2 used by override. Oct 1 21:23:30 Hilbert kernel: [ 0.000000] ACPI: IRQ9 used by override. Oct 1 21:23:30 Hilbert kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Oct 1 21:23:30 Hilbert kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs Oct 1 21:23:30 Hilbert kernel: [ 0.000000] nr_irqs_gsi: 40 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:74000000) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware Oct 1 21:23:30 Hilbert kernel: [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007fc00000 s79616 r8192 d22784 u1048576 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] pcpu-alloc: s79616 r8192 d22784 u1048576 alloc=1*2097152 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] pcpu-alloc: [0] 0 1 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516604 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] Policy zone: DMA32 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-11-generic root=UUID=c49615ed-88be-4cff-812e-d4389247f03d ro quiet splash vt.handoff=7 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] Checking aperture... Oct 1 21:23:30 Hilbert kernel: [ 0.000000] No AGP bridge found Oct 1 21:23:30 Hilbert kernel: [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area Oct 1 21:23:30 Hilbert kernel: [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! Oct 1 21:23:30 Hilbert kernel: [ 0.000000] Memory: 2039268k/2095540k available (6104k kernel code, 452k absent, 55820k reserved, 4880k data, 984k init) Oct 1 21:23:30 Hilbert kernel: [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] Hierarchical RCU implementation. Oct 1 21:23:30 Hilbert kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. Oct 1 21:23:30 Hilbert kernel: [ 0.000000] NR_IRQS:16640 nr_irqs:512 16 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] Extended CMOS year: 2000 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] vt handoff: transparent VT on vt#7 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] Console: colour VGA+ 80x25 Oct 1 21:23:30 Hilbert kernel: [ 0.000000] console [tty0] enabled Oct 1 21:23:30 Hilbert kernel: [ 0.000000] allocated 16777216 bytes of page_cgroup Oct 1 21:23:30 Hilbert kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups Oct 1 21:23:30 Hilbert kernel: [ 0.000000] hpet clockevent registered Oct 1 21:23:30 Hilbert kernel: [ 0.000000] Fast TSC calibration using PIT Oct 1 21:23:30 Hilbert kernel: [ 0.000000] Detected 2193.913 MHz processor. Oct 1 21:23:30 Hilbert kernel: [ 0.010004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4387.82 BogoMIPS (lpj=21939130) Oct 1 21:23:30 Hilbert kernel: [ 0.010010] pid_max: default: 32768 minimum: 301 Oct 1 21:23:30 Hilbert kernel: [ 0.010043] Security Framework initialized Oct 1 21:23:30 Hilbert kernel: [ 0.010062] AppArmor: AppArmor initialized Oct 1 21:23:30 Hilbert kernel: [ 0.010064] Yama: becoming mindful. Oct 1 21:23:30 Hilbert kernel: [ 0.010306] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Oct 1 21:23:30 Hilbert kernel: [ 0.011472] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Oct 1 21:23:30 Hilbert kernel: [ 0.012024] Mount-cache hash table entries: 256 Oct 1 21:23:30 Hilbert kernel: [ 0.012181] Initializing cgroup subsys cpuacct Oct 1 21:23:30 Hilbert kernel: [ 0.012187] Initializing cgroup subsys memory Oct 1 21:23:30 Hilbert kernel: [ 0.012197] Initializing cgroup subsys devices Oct 1 21:23:30 Hilbert kernel: [ 0.012199] Initializing cgroup subsys freezer Oct 1 21:23:30 Hilbert kernel: [ 0.012202] Initializing cgroup subsys net_cls Oct 1 21:23:30 Hilbert kernel: [ 0.012204] Initializing cgroup subsys blkio Oct 1 21:23:30 Hilbert kernel: [ 0.012212] Initializing cgroup subsys perf_event Oct 1 21:23:30 Hilbert kernel: [ 0.012246] CPU: Physical Processor ID: 0 Oct 1 21:23:30 Hilbert kernel: [ 0.012248] CPU: Processor Core ID: 0 Oct 1 21:23:30 Hilbert kernel: [ 0.012251] mce: CPU supports 6 MCE banks Oct 1 21:23:30 Hilbert kernel: [ 0.012261] CPU0: Thermal monitoring enabled (TM2) Oct 1 21:23:30 Hilbert kernel: [ 0.012266] using mwait in idle threads. Oct 1 21:23:30 Hilbert kernel: [ 0.014796] ACPI: Core revision 20110413 Oct 1 21:23:30 Hilbert kernel: [ 0.022605] ftrace: allocating 25651 entries in 101 pages Oct 1 21:23:30 Hilbert kernel: [ 0.030432] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Oct 1 21:23:30 Hilbert kernel: [ 0.133545] CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b Oct 1 21:23:30 Hilbert kernel: [ 0.140000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. Oct 1 21:23:30 Hilbert kernel: [ 0.140000] PEBS disabled due to CPU errata. Oct 1 21:23:30 Hilbert kernel: [ 0.140000] ... version: 2 Oct 1 21:23:30 Hilbert kernel: [ 0.140000] ... bit width: 40 Oct 1 21:23:30 Hilbert kernel: [ 0.140000] ... generic registers: 2 Oct 1 21:23:30 Hilbert kernel: [ 0.140000] ... value mask: 000000ffffffffff Oct 1 21:23:30 Hilbert kernel: [ 0.140000] ... max period: 000000007fffffff Oct 1 21:23:30 Hilbert kernel: [ 0.140000] ... fixed-purpose events: 3 Oct 1 21:23:30 Hilbert kernel: [ 0.140000] ... event mask: 0000000700000003 Oct 1 21:23:30 Hilbert kernel: [ 0.140000] Booting Node 0, Processors #1 Ok. Oct 1 21:23:30 Hilbert kernel: [ 0.140000] smpboot cpu 1: start_ip = 9a000 Oct 1 21:23:30 Hilbert kernel: [ 0.300018] Brought up 2 CPUs Oct 1 21:23:30 Hilbert kernel: [ 0.300021] Total of 2 processors activated (8775.56 BogoMIPS). Oct 1 21:23:30 Hilbert kernel: [ 0.301275] devtmpfs: initialized Oct 1 21:23:30 Hilbert kernel: [ 0.301427] print_constraints: dummy: Oct 1 21:23:30 Hilbert kernel: [ 0.301461] Time: 19:23:14 Date: 10/01/11 Oct 1 21:23:30 Hilbert kernel: [ 0.301497] NET: Registered protocol family 16 Oct 1 21:23:30 Hilbert kernel: [ 0.301528] Trying to unpack rootfs image as initramfs... Oct 1 21:23:30 Hilbert kernel: [ 0.301629] ACPI: bus type pci registered Oct 1 21:23:30 Hilbert kernel: [ 0.301691] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000) Oct 1 21:23:30 Hilbert kernel: [ 0.301694] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820 Oct 1 21:23:30 Hilbert kernel: [ 0.310041] PCI: Using configuration type 1 for base access Oct 1 21:23:30 Hilbert kernel: [ 0.310049] dmi type 0xB1 record - unknown flag Oct 1 21:23:30 Hilbert kernel: [ 0.310893] bio: create slab at 0 Oct 1 21:23:30 Hilbert kernel: [ 0.312100] ACPI: EC: Look up EC in DSDT Oct 1 21:23:30 Hilbert kernel: [ 0.319487] ACPI: SSDT 000000007fe6e4f2 00286 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) Oct 1 21:23:30 Hilbert kernel: [ 0.319755] ACPI: Dynamic OEM Table Load: Oct 1 21:23:30 Hilbert kernel: [ 0.319759] ACPI: SSDT (null) 00286 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) Oct 1 21:23:30 Hilbert kernel: [ 0.319864] ACPI: SSDT 000000007fe6de88 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) Oct 1 21:23:30 Hilbert kernel: [ 0.320147] ACPI: Dynamic OEM Table Load: Oct 1 21:23:30 Hilbert kernel: [ 0.320150] ACPI: SSDT (null) 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) Oct 1 21:23:30 Hilbert kernel: [ 0.320339] ACPI: SSDT 000000007fe6e778 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) Oct 1 21:23:30 Hilbert kernel: [ 0.320599] ACPI: Dynamic OEM Table Load: Oct 1 21:23:30 Hilbert kernel: [ 0.320602] ACPI: SSDT (null) 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) Oct 1 21:23:30 Hilbert kernel: [ 0.320673] ACPI: SSDT 000000007fe6e46d 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) Oct 1 21:23:30 Hilbert kernel: [ 0.320927] ACPI: Dynamic OEM Table Load: Oct 1 21:23:30 Hilbert kernel: [ 0.320930] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) Oct 1 21:23:30 Hilbert kernel: [ 0.321094] ACPI: Interpreter enabled Oct 1 21:23:30 Hilbert kernel: [ 0.321097] ACPI: (supports S0 S3 S4 S5) Oct 1 21:23:30 Hilbert kernel: [ 0.321114] ACPI: Using IOAPIC for interrupt routing Oct 1 21:23:30 Hilbert kernel: [ 0.352121] ACPI: No dock devices found. Oct 1 21:23:30 Hilbert kernel: [ 0.352124] HEST: Table not found. Oct 1 21:23:30 Hilbert kernel: [ 0.352128] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug Oct 1 21:23:30 Hilbert kernel: [ 0.360774] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) Oct 1 21:23:30 Hilbert kernel: [ 0.378083] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) Oct 1 21:23:30 Hilbert kernel: [ 0.378088] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) Oct 1 21:23:30 Hilbert kernel: [ 0.378091] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) Oct 1 21:23:30 Hilbert kernel: [ 0.378093] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) Oct 1 21:23:30 Hilbert kernel: [ 0.378096] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xf3ffffff] (ignored) Oct 1 21:23:30 Hilbert kernel: [ 0.378099] pci_root PNP0A03:00: host bridge window [mem 0xf8000000-0xfebfffff] (ignored) Oct 1 21:23:30 Hilbert kernel: [ 0.378101] pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff] (ignored) Oct 1 21:23:30 Hilbert kernel: [ 0.378104] pci_root PNP0A03:00: host bridge window [mem 0xfed1c000-0xfed1ffff] (ignored) Oct 1 21:23:30 Hilbert kernel: [ 0.378106] pci_root PNP0A03:00: host bridge window [mem 0xfed90000-0xfed9ffff] (ignored) Oct 1 21:23:30 Hilbert kernel: [ 0.378109] pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff] (ignored) Oct 1 21:23:30 Hilbert kernel: [ 0.378112] pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff] (ignored) Oct 1 21:23:30 Hilbert kernel: [ 0.378114] pci_root PNP0A03:00: host bridge window [mem 0xffb00000-0xffefffff] (ignored) Oct 1 21:23:30 Hilbert kernel: [ 0.378129] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600 Oct 1 21:23:30 Hilbert kernel: [ 0.378176] pci 0000:00:01.0: [8086:2a01] type 1 class 0x000604 Oct 1 21:23:30 Hilbert kernel: [ 0.378212] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold Oct 1 21:23:30 Hilbert kernel: [ 0.378216] pci 0000:00:01.0: PME# disabled Oct 1 21:23:30 Hilbert kernel: [ 0.378273] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03 Oct 1 21:23:30 Hilbert kernel: [ 0.378332] pci 0000:00:1a.0: reg 20: [io 0x6f20-0x6f3f] Oct 1 21:23:30 Hilbert kernel: [ 0.378374] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03 Oct 1 21:23:30 Hilbert kernel: [ 0.378433] pci 0000:00:1a.1: reg 20: [io 0x6f00-0x6f1f] Oct 1 21:23:30 Hilbert kernel: [ 0.378490] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03 Oct 1 21:23:30 Hilbert kernel: [ 0.378515] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff] Oct 1 21:23:30 Hilbert kernel: [ 0.378609] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold Oct 1 21:23:30 Hilbert kernel: [ 0.378615] pci 0000:00:1a.7: PME# disabled Oct 1 21:23:30 Hilbert kernel: [ 0.378646] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403 Oct 1 21:23:30 Hilbert kernel: [ 0.378669] pci 0000:00:1b.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit] Oct 1 21:23:30 Hilbert kernel: [ 0.378755] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold Oct 1 21:23:30 Hilbert kernel: [ 0.378760] pci 0000:00:1b.0: PME# disabled Oct 1 21:23:30 Hilbert kernel: [ 0.378790] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604 Oct 1 21:23:30 Hilbert kernel: [ 0.378880] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Oct 1 21:23:30 Hilbert kernel: [ 0.378885] pci 0000:00:1c.0: PME# disabled Oct 1 21:23:30 Hilbert kernel: [ 0.378922] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604 Oct 1 21:23:30 Hilbert kernel: [ 0.379012] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold Oct 1 21:23:30 Hilbert kernel: [ 0.379017] pci 0000:00:1c.1: PME# disabled Oct 1 21:23:30 Hilbert kernel: [ 0.379051] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604 Oct 1 21:23:30 Hilbert kernel: [ 0.379142] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold Oct 1 21:23:30 Hilbert kernel: [ 0.379147] pci 0000:00:1c.3: PME# disabled Oct 1 21:23:30 Hilbert kernel: [ 0.379182] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03 Oct 1 21:23:30 Hilbert kernel: [ 0.379240] pci 0000:00:1d.0: reg 20: [io 0x6f80-0x6f9f] Oct 1 21:23:30 Hilbert kernel: [ 0.379283] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03 Oct 1 21:23:30 Hilbert kernel: [ 0.379342] pci 0000:00:1d.1: reg 20: [io 0x6f60-0x6f7f] Oct 1 21:23:30 Hilbert kernel: [ 0.379385] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03 Oct 1 21:23:30 Hilbert kernel: [ 0.379444] pci 0000:00:1d.2: reg 20: [io 0x6f40-0x6f5f] Oct 1 21:23:30 Hilbert kernel: [ 0.379500] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03 Oct 1 21:23:30 Hilbert kernel: [ 0.379525] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff] Oct 1 21:23:30 Hilbert kernel: [ 0.379620] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold Oct 1 21:23:30 Hilbert kernel: [ 0.379626] pci 0000:00:1d.7: PME# disabled Oct 1 21:23:30 Hilbert kernel: [ 0.379650] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 Oct 1 21:23:30 Hilbert kernel: [ 0.379740] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601 Oct 1 21:23:30 Hilbert kernel: [ 0.379859] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO Oct 1 21:23:30 Hilbert kernel: [ 0.379866] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO Oct 1 21:23:30 Hilbert kernel: [ 0.379870] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) Oct 1 21:23:30 Hilbert kernel: [ 0.379877] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) Oct 1 21:23:30 Hilbert kernel: [ 0.379925] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101 Oct 1 21:23:30 Hilbert kernel: [ 0.379942] pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7] Oct 1 21:23:30 Hilbert kernel: [ 0.379955] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7] Oct 1 21:23:30 Hilbert kernel: [ 0.379967] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177] Oct 1 21:23:30 Hilbert kernel: [ 0.379980] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377] Oct 1 21:23:30 Hilbert kernel: [ 0.380015] pci 0000:00:1f.1: reg 20: [io 0x6fa0-0x6faf] Oct 1 21:23:30 Hilbert kernel: [ 0.380071] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106 Oct 1 21:23:30 Hilbert kernel: [ 0.380099] pci 0000:00:1f.2: reg 10: [io 0x6eb0-0x6eb7] Oct 1 21:23:30 Hilbert kernel: [ 0.380111] pci 0000:00:1f.2: reg 14: [io 0x6eb8-0x6ebb] Oct 1 21:23:30 Hilbert kernel: [ 0.380124] pci 0000:00:1f.2: reg 18: [io 0x6ec0-0x6ec7] Oct 1 21:23:30 Hilbert kernel: [ 0.380136] pci 0000:00:1f.2: reg 1c: [io 0x6ec8-0x6ecb] Oct 1 21:23:30 Hilbert kernel: [ 0.380149] pci 0000:00:1f.2: reg 20: [io 0x6ee0-0x6eff] Oct 1 21:23:30 Hilbert kernel: [ 0.380162] pci 0000:00:1f.2: reg 24: [mem 0xfebfb800-0xfebfbfff] Oct 1 21:23:30 Hilbert kernel: [ 0.380211] pci 0000:00:1f.2: PME# supported from D3hot Oct 1 21:23:30 Hilbert kernel: [ 0.380216] pci 0000:00:1f.2: PME# disabled Oct 1 21:23:30 Hilbert kernel: [ 0.380241] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05 Oct 1 21:23:30 Hilbert kernel: [ 0.380258] pci 0000:00:1f.3: reg 10: [mem 0xfebfb700-0xfebfb7ff] Oct 1 21:23:30 Hilbert kernel: [ 0.380302] pci 0000:00:1f.3: reg 20: [io 0x10c0-0x10df] Oct 1 21:23:30 Hilbert kernel: [ 0.380392] pci 0000:01:00.0: [10de:0407] type 0 class 0x000300 Oct 1 21:23:30 Hilbert kernel: [ 0.380411] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff] Oct 1 21:23:30 Hilbert kernel: [ 0.380433] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] Oct 1 21:23:30 Hilbert kernel: [ 0.380455] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit] Oct 1 21:23:30 Hilbert kernel: [ 0.380469] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f] Oct 1 21:23:30 Hilbert kernel: [ 0.380484] pci 0000:01:00.0: reg 30: [mem 0xfea00000-0xfea1ffff pref] Oct 1 21:23:30 Hilbert kernel: [ 0.380569] pci 0000:00:01.0: PCI bridge to [bus 01-01] Oct 1 21:23:30 Hilbert kernel: [ 0.380573] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] Oct 1 21:23:30 Hilbert kernel: [ 0.380577] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff] Oct 1 21:23:30 Hilbert kernel: [ 0.380581] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] Oct 1 21:23:30 Hilbert kernel: [ 0.380644] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b] Oct 1 21:23:30 Hilbert kernel: [ 0.380650] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) Oct 1 21:23:30 Hilbert kernel: [ 0.380656] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) Oct 1 21:23:30 Hilbert kernel: [ 0.380664] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Oct 1 21:23:30 Hilbert kernel: [ 0.380828] pci 0000:0c:00.0: [8086:4222] type 0 class 0x000280 Oct 1 21:23:30 Hilbert kernel: [ 0.380884] pci 0000:0c:00.0: reg 10: [mem 0xf9fff000-0xf9ffffff] Oct 1 21:23:30 Hilbert kernel: [ 0.381227] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold Oct 1 21:23:30 Hilbert kernel: [ 0.381241] pci 0000:0c:00.0: PME# disabled Oct 1 21:23:30 Hilbert kernel: [ 0.381311] pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' Oct 1 21:23:30 Hilbert kernel: [ 0.381339] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c] Oct 1 21:23:30 Hilbert kernel: [ 0.381345] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) Oct 1 21:23:30 Hilbert kernel: [ 0.381350] pci 0000:00:1c.1: bridge window [mem 0xf9f00000-0xf9ffffff] Oct 1 21:23:30 Hilbert kernel: [ 0.381358] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Oct 1 21:23:30 Hilbert kernel: [ 0.381423] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e] Oct 1 21:23:30 Hilbert kernel: [ 0.381428] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] Oct 1 21:23:30 Hilbert kernel: [ 0.381434] pci 0000:00:1c.3: bridge window [mem 0xf9c00000-0xf9efffff] Oct 1 21:23:30 Hilbert kernel: [ 0.381442] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] Oct 1 21:23:30 Hilbert kernel: [ 0.381489] pci 0000:03:00.0: [14e4:170c] type 0 class 0x000200 Oct 1 21:23:30 Hilbert kernel: [ 0.381511] pci 0000:03:00.0: reg 10: [mem 0xf9bfe000-0xf9bfffff] Oct 1 21:23:30 Hilbert kernel: [ 0.381599] pci 0000:03:00.0: supports D1 D2 Oct 1 21:23:30 Hilbert kernel: [ 0.381601] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold Oct 1 21:23:30 Hilbert kernel: [ 0.381606] pci 0000:03:00.0: PME# disabled Oct 1 21:23:30 Hilbert kernel: [ 0.381629] pci 0000:03:01.0: [1180:0832] type 0 class 0x000c00 Oct 1 21:23:30 Hilbert kernel: [ 0.381645] pci 0000:03:01.0: proprietary Ricoh MMC controller disabled (via firewire function) Oct 1 21:23:30 Hilbert kernel: [ 0.381647] pci 0000:03:01.0: MMC cards are now supported by standard SDHCI controller Oct 1 21:23:30 Hilbert kernel: [ 0.381665] pci 0000:03:01.0: reg 10: [mem 0xf9bfd800-0xf9bfdfff] Oct 1 21:23:30 Hilbert kernel: [ 0.381756] pci 0000:03:01.0: supports D1 D2 Oct 1 21:23:30 Hilbert kernel: [ 0.381758] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold Oct 1 21:23:30 Hilbert kernel: [ 0.381763] pci 0000:03:01.0: PME# disabled Oct 1 21:23:30 Hilbert kernel: [ 0.381786] pci 0000:03:01.1: [1180:0822] type 0 class 0x000805 Oct 1 21:23:30 Hilbert kernel: [ 0.381810] pci 0000:03:01.1: reg 10: [mem 0xf9bfd400-0xf9bfd4ff] Oct 1 21:23:30 Hilbert kernel: [ 0.381903] pci 0000:03:01.1: supports D1 D2 Oct 1 21:23:30 Hilbert kernel: [ 0.381906] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold Oct 1 21:23:30 Hilbert kernel: [ 0.381911] pci 0000:03:01.1: PME# disabled Oct 1 21:23:30 Hilbert kernel: [ 0.381937] pci 0000:03:01.2: [1180:0592] type 0 class 0x000880 Oct 1 21:23:30 Hilbert kernel: [ 0.381960] pci 0000:03:01.2: reg 10: [mem 0xf9bfd600-0xf9bfd6ff] Oct 1 21:23:30 Hilbert kernel: [ 0.382050] pci 0000:03:01.2: supports D1 D2 Oct 1 21:23:30 Hilbert kernel: [ 0.382052] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold Oct 1 21:23:30 Hilbert kernel: [ 0.382057] pci 0000:03:01.2: PME# disabled Oct 1 21:23:30 Hilbert kernel: [ 0.382080] pci 0000:03:01.3: [1180:0852] type 0 class 0x000880 Oct 1 21:23:30 Hilbert kernel: [ 0.382104] pci 0000:03:01.3: reg 10: [mem 0xf9bfd700-0xf9bfd7ff] Oct 1 21:23:30 Hilbert kernel: [ 0.382194] pci 0000:03:01.3: supports D1 D2 Oct 1 21:23:30 Hilbert kernel: [ 0.382196] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold Oct 1 21:23:30 Hilbert kernel: [ 0.382201] pci 0000:03:01.3: PME# disabled Oct 1 21:23:30 Hilbert kernel: [ 0.382276] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) Oct 1 21:23:30 Hilbert kernel: [ 0.382282] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) Oct 1 21:23:30 Hilbert kernel: [ 0.382287] pci 0000:00:1e.0: bridge window [mem 0xf9b00000-0xf9bfffff] Oct 1 21:23:30 Hilbert kernel: [ 0.382296] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Oct 1 21:23:30 Hilbert kernel: [ 0.382299] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) Oct 1 21:23:30 Hilbert kernel: [ 0.382301] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) Oct 1 21:23:30 Hilbert kernel: [ 0.382337] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Oct 1 21:23:30 Hilbert kernel: [ 0.382532] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] Oct 1 21:23:30 Hilbert kernel: [ 0.382617] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] Oct 1 21:23:30 Hilbert kernel: [ 0.382656] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] Oct 1 21:23:30 Hilbert kernel: [ 0.382696] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] Oct 1 21:23:30 Hilbert kernel: [ 0.382739] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] Oct 1 21:23:30 Hilbert kernel: [ 0.382781] pci0000:00: Requesting ACPI _OSC control (0x1d) Oct 1 21:23:30 Hilbert kernel: [ 0.382785] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d Oct 1 21:23:30 Hilbert kernel: [ 0.382787] ACPI _OSC control for PCIe not granted, disabling ASPM Oct 1 21:23:30 Hilbert kernel: [ 0.390453] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *7 Oct 1 21:23:30 Hilbert kernel: [ 0.390518] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 Oct 1 21:23:30 Hilbert kernel: [ 0.390579] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4 Oct 1 21:23:30 Hilbert kernel: [ 0.390645] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11) Oct 1 21:23:30 Hilbert kernel: [ 0.390707] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Oct 1 21:23:30 Hilbert kernel: [ 0.390771] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Oct 1 21:23:30 Hilbert kernel: [ 0.390834] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) Oct 1 21:23:30 Hilbert kernel: [ 0.390890] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. Oct 1 21:23:30 Hilbert kernel: [ 0.391024] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none Oct 1 21:23:30 Hilbert kernel: [ 0.391030] vgaarb: loaded Oct 1 21:23:30 Hilbert kernel: [ 0.391031] vgaarb: bridge control possible 0000:01:00.0 Oct 1 21:23:30 Hilbert kernel: [ 0.391234] SCSI subsystem initialized Oct 1 21:23:30 Hilbert kernel: [ 0.391309] libata version 3.00 loaded. Oct 1 21:23:30 Hilbert kernel: [ 0.391356] usbcore: registered new interface driver usbfs Oct 1 21:23:30 Hilbert kernel: [ 0.391367] usbcore: registered new interface driver hub Oct 1 21:23:30 Hilbert kernel: [ 0.391398] usbcore: registered new device driver usb Oct 1 21:23:30 Hilbert kernel: [ 0.391486] PCI: Using ACPI for IRQ routing Oct 1 21:23:30 Hilbert kernel: [ 0.394132] PCI: pci_cache_line_size set to 64 bytes Oct 1 21:23:30 Hilbert kernel: [ 0.394260] reserve RAM buffer: 000000000009f000 - 000000000009ffff Oct 1 21:23:30 Hilbert kernel: [ 0.394263] reserve RAM buffer: 000000007fe6d800 - 000000007fffffff Oct 1 21:23:30 Hilbert kernel: [ 0.394365] NetLabel: Initializing Oct 1 21:23:30 Hilbert kernel: [ 0.394367] NetLabel: domain hash size = 128 Oct 1 21:23:30 Hilbert kernel: [ 0.394369] NetLabel: protocols = UNLABELED CIPSOv4 Oct 1 21:23:30 Hilbert kernel: [ 0.394383] NetLabel: unlabeled traffic allowed by default Oct 1 21:23:30 Hilbert kernel: [ 0.394423] HPET: 3 timers in total, 0 timers will be used for per-cpu timer Oct 1 21:23:30 Hilbert kernel: [ 0.394429] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Oct 1 21:23:30 Hilbert kernel: [ 0.394434] hpet0: 3 comparators, 64-bit 14.318180 MHz counter Oct 1 21:23:30 Hilbert kernel: [ 0.400182] Switching to clocksource hpet Oct 1 21:23:30 Hilbert kernel: [ 0.407394] AppArmor: AppArmor Filesystem Enabled Oct 1 21:23:30 Hilbert kernel: [ 0.407434] pnp: PnP ACPI init Oct 1 21:23:30 Hilbert kernel: [ 0.407455] ACPI: bus type pnp registered Oct 1 21:23:30 Hilbert kernel: [ 0.409685] Switched to NOHz mode on CPU #1 Oct 1 21:23:30 Hilbert kernel: [ 0.409688] Switched to NOHz mode on CPU #0 Oct 1 21:23:30 Hilbert kernel: [ 0.416047] pnp 00:00: [bus 00-ff] Oct 1 21:23:30 Hilbert kernel: [ 0.416051] pnp 00:00: [io 0x0000-0x0cf7 window] Oct 1 21:23:30 Hilbert kernel: [ 0.416054] pnp 00:00: [io 0x0cf8-0x0cff] Oct 1 21:23:30 Hilbert kernel: [ 0.416056] pnp 00:00: [io 0x0d00-0xffff window] Oct 1 21:23:30 Hilbert kernel: [ 0.416059] pnp 00:00: [mem 0x000a0000-0x000bffff window] Oct 1 21:23:30 Hilbert kernel: [ 0.416061] pnp 00:00: [mem 0x000d0000-0x000dffff window] Oct 1 21:23:30 Hilbert kernel: [ 0.416063] pnp 00:00: [mem 0x80000000-0xf3ffffff window] Oct 1 21:23:30 Hilbert kernel: [ 0.416066] pnp 00:00: [mem 0xf8000000-0xfebfffff window] Oct 1 21:23:30 Hilbert kernel: [ 0.416068] pnp 00:00: [mem 0xfec10000-0xfecfffff window] Oct 1 21:23:30 Hilbert kernel: [ 0.416070] pnp 00:00: [mem 0xfed1c000-0xfed1ffff window] Oct 1 21:23:30 Hilbert kernel: [ 0.416072] pnp 00:00: [mem 0xfed90000-0xfed9ffff window] Oct 1 21:23:30 Hilbert kernel: [ 0.416074] pnp 00:00: [mem 0xfeda7000-0xfedfffff window] Oct 1 21:23:30 Hilbert kernel: [ 0.416077] pnp 00:00: [mem 0xfee10000-0xff9fffff window] Oct 1 21:23:30 Hilbert kernel: [ 0.416082] pnp 00:00: [mem 0xffb00000-0xffefffff window] Oct 1 21:23:30 Hilbert kernel: [ 0.416169] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) Oct 1 21:23:30 Hilbert kernel: [ 0.416199] pnp 00:01: [irq 12] Oct 1 21:23:30 Hilbert kernel: [ 0.416223] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active) Oct 1 21:23:30 Hilbert kernel: [ 0.416238] pnp 00:02: [io 0x0060] Oct 1 21:23:30 Hilbert kernel: [ 0.416240] pnp 00:02: [io 0x0064] Oct 1 21:23:30 Hilbert kernel: [ 0.416242] pnp 00:02: [io 0x0062] Oct 1 21:23:30 Hilbert kernel: [ 0.416244] pnp 00:02: [io 0x0066] Oct 1 21:23:30 Hilbert kernel: [ 0.416250] pnp 00:02: [irq 1] Oct 1 21:23:30 Hilbert kernel: [ 0.416274] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) Oct 1 21:23:30 Hilbert kernel: [ 0.416288] pnp 00:03: [io 0x0070-0x0071] Oct 1 21:23:30 Hilbert kernel: [ 0.416295] pnp 00:03: [irq 8] Oct 1 21:23:30 Hilbert kernel: [ 0.416297] pnp 00:03: [io 0x0072-0x0077] Oct 1 21:23:30 Hilbert kernel: [ 0.416317] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) Oct 1 21:23:30 Hilbert kernel: [ 0.416333] pnp 00:04: [io 0x0061] Oct 1 21:23:30 Hilbert kernel: [ 0.416335] pnp 00:04: [io 0x0063] Oct 1 21:23:30 Hilbert kernel: [ 0.416337] pnp 00:04: [io 0x0065] Oct 1 21:23:30 Hilbert kernel: [ 0.416339] pnp 00:04: [io 0x0067] Oct 1 21:23:30 Hilbert kernel: [ 0.416360] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) Oct 1 21:23:30 Hilbert kernel: [ 0.416374] pnp 00:05: [io 0x0c80-0x0cff] Oct 1 21:23:30 Hilbert kernel: [ 0.416434] system 00:05: [io 0x0c80-0x0cff] could not be reserved Oct 1 21:23:30 Hilbert kernel: [ 0.416438] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) Oct 1 21:23:30 Hilbert kernel: [ 0.416455] pnp 00:06: [dma 4] Oct 1 21:23:30 Hilbert kernel: [ 0.416457] pnp 00:06: [io 0x0000-0x000f] Oct 1 21:23:30 Hilbert kernel: [ 0.416459] pnp 00:06: [io 0x0080-0x0085] Oct 1 21:23:30 Hilbert kernel: [ 0.416461] pnp 00:06: [io 0x0087-0x008f] Oct 1 21:23:30 Hilbert kernel: [ 0.416463] pnp 00:06: [io 0x00c0-0x00df] Oct 1 21:23:30 Hilbert kernel: [ 0.416465] pnp 00:06: [io 0x0010-0x001f] Oct 1 21:23:30 Hilbert kernel: [ 0.416467] pnp 00:06: [io 0x0090-0x0091] Oct 1 21:23:30 Hilbert kernel: [ 0.416469] pnp 00:06: [io 0x0093-0x009f] Oct 1 21:23:30 Hilbert kernel: [ 0.416492] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active) Oct 1 21:23:30 Hilbert kernel: [ 0.416507] pnp 00:07: [io 0x00f0-0x00ff] Oct 1 21:23:30 Hilbert kernel: [ 0.416513] pnp 00:07: [irq 13] Oct 1 21:23:30 Hilbert kernel: [ 0.416539] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) Oct 1 21:23:30 Hilbert kernel: [ 0.416574] pnp 00:08: [mem 0xfed00000-0xfed003ff] Oct 1 21:23:30 Hilbert kernel: [ 0.416623] system 00:08: [mem 0xfed00000-0xfed003ff] has been reserved Oct 1 21:23:30 Hilbert kernel: [ 0.416627] system 00:08: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) Oct 1 21:23:30 Hilbert kernel: [ 0.416751] pnp 00:09: [io 0x0900-0x097f] Oct 1 21:23:30 Hilbert kernel: [ 0.416753] pnp 00:09: [io 0x0092] Oct 1 21:23:30 Hilbert kernel: [ 0.416755] pnp 00:09: [io 0x00b2-0x00b3] Oct 1 21:23:30 Hilbert kernel: [ 0.416757] pnp 00:09: [io 0x0020-0x0021] Oct 1 21:23:30 Hilbert kernel: [ 0.416759] pnp 00:09: [io 0x00a0-0x00a1] Oct 1 21:23:30 Hilbert kernel: [ 0.416761] pnp 00:09: [irq 0 disabled] Oct 1 21:23:30 Hilbert kernel: [ 0.416763] pnp 00:09: [io 0x04d0-0x04d1] Oct 1 21:23:30 Hilbert kernel: [ 0.416765] pnp 00:09: [io 0x1000-0x1005] Oct 1 21:23:30 Hilbert kernel: [ 0.416766] pnp 00:09: [io 0x1008-0x100f] Oct 1 21:23:30 Hilbert kernel: [ 0.416781] pnp 00:09: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] Oct 1 21:23:30 Hilbert kernel: [ 0.416784] pnp 00:09: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] Oct 1 21:23:30 Hilbert kernel: [ 0.416835] system 00:09: [io 0x0900-0x097f] has been reserved Oct 1 21:23:30 Hilbert kernel: [ 0.416838] system 00:09: [io 0x04d0-0x04d1] has been reserved Oct 1 21:23:30 Hilbert kernel: [ 0.416842] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) Oct 1 21:23:30 Hilbert kernel: [ 0.416857] pnp 00:0a: [io 0xf400-0xf4fe] Oct 1 21:23:30 Hilbert kernel: [ 0.416859] pnp 00:0a: [io 0x0086] Oct 1 21:23:30 Hilbert kernel: [ 0.416861] pnp 00:0a: [io 0x1006-0x1007] Oct 1 21:23:30 Hilbert kernel: [ 0.416863] pnp 00:0a: [io 0x100a-0x1059] Oct 1 21:23:30 Hilbert kernel: [ 0.416865] pnp 00:0a: [io 0x1060-0x107f] Oct 1 21:23:30 Hilbert kernel: [ 0.416867] pnp 00:0a: [io 0x1080-0x10bf] Oct 1 21:23:30 Hilbert kernel: [ 0.416869] pnp 00:0a: [io 0x10c0-0x10df] Oct 1 21:23:30 Hilbert kernel: [ 0.416874] pnp 00:0a: [io 0x1010-0x102f] Oct 1 21:23:30 Hilbert kernel: [ 0.416876] pnp 00:0a: [io 0x0809] Oct 1 21:23:30 Hilbert kernel: [ 0.416890] pnp 00:0a: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] Oct 1 21:23:30 Hilbert kernel: [ 0.416893] pnp 00:0a: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] Oct 1 21:23:30 Hilbert kernel: [ 0.416896] pnp 00:0a: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] Oct 1 21:23:30 Hilbert kernel: [ 0.416900] pnp 00:0a: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] Oct 1 21:23:30 Hilbert kernel: [ 0.416954] system 00:0a: [io 0xf400-0xf4fe] has been reserved Oct 1 21:23:30 Hilbert kernel: [ 0.416957] system 00:0a: [io 0x1080-0x10bf] has been reserved Oct 1 21:23:30 Hilbert kernel: [ 0.416960] system 00:0a: [io 0x10c0-0x10df] has been reserved Oct 1 21:23:30 Hilbert kernel: [ 0.416962] system 00:0a: [io 0x0809] has been reserved Oct 1 21:23:30 Hilbert kernel: [ 0.416966] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) Oct 1 21:23:30 Hilbert kernel: [ 0.426538] pnp 00:0b: [mem 0x00000000-0x0009efff] Oct 1 21:23:30 Hilbert kernel: [ 0.426542] pnp 00:0b: [mem 0x0009f000-0x0009ffff] Oct 1 21:23:30 Hilbert kernel: [ 0.426544] pnp 00:0b: [mem 0x000c0000-0x000cffff] Oct 1 21:23:30 Hilbert kernel: [ 0.426546] pnp 00:0b: [mem 0x000e0000-0x000fffff] Oct 1 21:23:30 Hilbert kernel: [ 0.426549] pnp 00:0b: [mem 0x00100000-0x7fe6d7ff] Oct 1 21:23:30 Hilbert kernel: [ 0.426551] pnp 00:0b: [mem 0x7fe6d800-0x7fefffff] Oct 1 21:23:30 Hilbert kernel: [ 0.426553] pnp 00:0b: [mem 0x7ff00000-0x7fffffff] Oct 1 21:23:30 Hilbert kernel: [ 0.426555] pnp 00:0b: [mem 0x7ff00000-0x806fffff] Oct 1 21:23:30 Hilbert kernel: [ 0.426557] pnp 00:0b: [mem 0xfff00000-0xffffffff] Oct 1 21:23:30 Hilbert kernel: [ 0.426559] pnp 00:0b: [mem 0xffa00000-0xffafffff] Oct 1 21:23:30 Hilbert kernel: [ 0.426561] pnp 00:0b: [mem 0xfec00000-0xfec0ffff] Oct 1 21:23:30 Hilbert kernel: [ 0.426563] pnp 00:0b: [mem 0xfee00000-0xfee0ffff] Oct 1 21:23:30 Hilbert kernel: [ 0.426565] pnp 00:0b: [mem 0xfed20000-0xfed8ffff] Oct 1 21:23:30 Hilbert kernel: [ 0.426567] pnp 00:0b: [mem 0xfeda0000-0xfeda3fff] Oct 1 21:23:30 Hilbert kernel: [ 0.426569] pnp 00:0b: [mem 0xfeda4000-0xfeda4fff] Oct 1 21:23:30 Hilbert kernel: [ 0.426571] pnp 00:0b: [mem 0xfeda5000-0xfeda5fff] Oct 1 21:23:30 Hilbert kernel: [ 0.426573] pnp 00:0b: [mem 0xfeda6000-0xfeda6fff] Oct 1 21:23:30 Hilbert kernel: [ 0.426575] pnp 00:0b: [mem 0xfed18000-0xfed1bfff] Oct 1 21:23:30 Hilbert kernel: [ 0.426577] pnp 00:0b: [mem 0xf4000000-0xf7ffffff] Oct 1 21:23:30 Hilbert kernel: [ 0.426681] system 00:0b: [mem 0x00000000-0x0009efff] could not be reserved Oct 1 21:23:30 Hilbert kernel: [ 0.426684] system 00:0b: [mem 0x0009f000-0x0009ffff] could not be reserved Oct 1 21:23:30 Hilbert kernel: [ 0.426687] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved Oct 1 21:23:30 Hilbert kernel: [ 0.426690] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved Oct 1 21:23:30 Hilbert kernel: [ 0.426693] system 00:0b: [mem 0x00100000-0x7fe6d7ff] could not be reserved Oct 1 21:23:30 Hilbert kernel: [ 0.426696] system 00:0b: [mem 0x7fe6d800-0x7fefffff] has been reserved Oct 1 21:23:30 Hilbert kernel: [ 0.426699] system 00:0b: [mem 0x7ff00000-0x7fffffff] has been reserved Oct 1 21:23:30 Hilbert kernel: [ 0.426701] system 00:0b: [mem 0x7ff00000-0x806fffff] could not be reserved Oct 1 21:23:30 Hilbert kernel: [ 0.426704] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved Oct 1 21:23:30 Hilbert kernel: [ 0.426707] system 00:0b: [mem 0xffa00000-0xffafffff] has been reserved Oct 1 21:23:30 Hilbert kernel: [ 0.426710] system 00:0b: [mem 0xfec00000-0xfec0ffff] could not be reserved Oct 1 21:23:30 Hilbert kernel: [ 0.426713] system 00:0b: [mem 0xfee00000-0xfee0ffff] has been reserved Oct 1 21:23:30 Hilbert kernel: [ 0.426716] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved Oct 1 21:23:30 Hilbert kernel: [ 0.426719] system 00:0b: [mem 0xfeda0000-0xfeda3fff] has been reserved Oct 1 21:23:30 Hilbert kernel: [ 0.426722] system 00:0b: [mem 0xfeda4000-0xfeda4fff] has been reserved Oct 1 21:23:30 Hilbert kernel: [ 0.426724] system 00:0b: [mem 0xfeda5000-0xfeda5fff] has been reserved Oct 1 21:23:30 Hilbert kernel: [ 0.426727] system 00:0b: [mem 0xfeda6000-0xfeda6fff] has been reserved Oct 1 21:23:30 Hilbert kernel: [ 0.426730] system 00:0b: [mem 0xfed18000-0xfed1bfff] has been reserved Oct 1 21:23:30 Hilbert kernel: [ 0.426733] system 00:0b: [mem 0xf4000000-0xf7ffffff] has been reserved Oct 1 21:23:30 Hilbert kernel: [ 0.426736] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) Oct 1 21:23:30 Hilbert kernel: [ 0.426790] pnp: PnP ACPI: found 12 devices Oct 1 21:23:30 Hilbert kernel: [ 0.426792] ACPI: ACPI bus type pnp unregistered Oct 1 21:23:30 Hilbert kernel: [ 0.432864] PCI: max bus depth: 1 pci_try_num: 2 Oct 1 21:23:30 Hilbert kernel: [ 0.432927] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref] Oct 1 21:23:30 Hilbert kernel: [ 0.432931] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff] Oct 1 21:23:30 Hilbert kernel: [ 0.432935] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80200000-0x803fffff] Oct 1 21:23:30 Hilbert kernel: [ 0.432938] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref] Oct 1 21:23:30 Hilbert kernel: [ 0.432942] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff] Oct 1 21:23:30 Hilbert kernel: [ 0.432945] pci 0000:00:01.0: PCI bridge to [bus 01-01] Oct 1 21:23:30 Hilbert kernel: [ 0.432948] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] Oct 1 21:23:30 Hilbert kernel: [ 0.432952] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff] Oct 1 21:23:30 Hilbert kernel: [ 0.432955] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] Oct 1 21:23:30 Hilbert kernel: [ 0.432960] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b] Oct 1 21:23:30 Hilbert kernel: [ 0.432964] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] Oct 1 21:23:30 Hilbert kernel: [ 0.432970] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff] Oct 1 21:23:30 Hilbert kernel: [ 0.432976] pci 0000:00:1c.0: bridge window [mem 0x80400000-0x805fffff 64bit pref] Oct 1 21:23:30 Hilbert kernel: [ 0.432984] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c] Oct 1 21:23:30 Hilbert kernel: [ 0.432987] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] Oct 1 21:23:30 Hilbert kernel: [ 0.432994] pci 0000:00:1c.1: bridge window [mem 0xf9f00000-0xf9ffffff] Oct 1 21:23:30 Hilbert kernel: [ 0.432999] pci 0000:00:1c.1: bridge window [mem 0x80000000-0x801fffff 64bit pref] Oct 1 21:23:30 Hilbert kernel: [ 0.433008] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e] Oct 1 21:23:30 Hilbert kernel: [ 0.433011] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] Oct 1 21:23:30 Hilbert kernel: [ 0.433018] pci 0000:00:1c.3: bridge window [mem 0xf9c00000-0xf9efffff] Oct 1 21:23:30 Hilbert kernel: [ 0.433023] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] Oct 1 21:23:30 Hilbert kernel: [ 0.433032] pci 0000:00:1e.0: PCI bridge to [bus 03-03] Oct 1 21:23:30 Hilbert kernel: [ 0.433034] pci 0000:00:1e.0: bridge window [io disabled] Oct 1 21:23:30 Hilbert kernel: [ 0.433040] pci 0000:00:1e.0: bridge window [mem 0xf9b00000-0xf9bfffff] Oct 1 21:23:30 Hilbert kernel: [ 0.433045] pci 0000:00:1e.0: bridge window [mem pref disabled] Oct 1 21:23:30 Hilbert kernel: [ 0.433072] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Oct 1 21:23:30 Hilbert kernel: [ 0.433077] pci 0000:00:01.0: setting latency timer to 64 Oct 1 21:23:30 Hilbert kernel: [ 0.433085] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Oct 1 21:23:30 Hilbert kernel: [ 0.433090] pci 0000:00:1c.0: setting latency timer to 64 Oct 1 21:23:30 Hilbert kernel: [ 0.433101] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Oct 1 21:23:30 Hilbert kernel: [ 0.433107] pci 0000:00:1c.1: setting latency timer to 64 Oct 1 21:23:30 Hilbert kernel: [ 0.433118] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 Oct 1 21:23:30 Hilbert kernel: [ 0.433123] pci 0000:00:1c.3: setting latency timer to 64 Oct 1 21:23:30 Hilbert kernel: [ 0.433132] pci 0000:00:1e.0: setting latency timer to 64 Oct 1 21:23:30 Hilbert kernel: [ 0.433136] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] Oct 1 21:23:30 Hilbert kernel: [ 0.433139] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff] Oct 1 21:23:30 Hilbert kernel: [ 0.433141] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] Oct 1 21:23:30 Hilbert kernel: [ 0.433143] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfeafffff] Oct 1 21:23:30 Hilbert kernel: [ 0.433146] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] Oct 1 21:23:30 Hilbert kernel: [ 0.433148] pci_bus 0000:0b: resource 0 [io 0x3000-0x3fff] Oct 1 21:23:30 Hilbert kernel: [ 0.433151] pci_bus 0000:0b: resource 1 [mem 0x80200000-0x803fffff] Oct 1 21:23:30 Hilbert kernel: [ 0.433153] pci_bus 0000:0b: resource 2 [mem 0x80400000-0x805fffff 64bit pref] Oct 1 21:23:30 Hilbert kernel: [ 0.433156] pci_bus 0000:0c: resource 0 [io 0x2000-0x2fff] Oct 1 21:23:30 Hilbert kernel: [ 0.433158] pci_bus 0000:0c: resource 1 [mem 0xf9f00000-0xf9ffffff] Oct 1 21:23:30 Hilbert kernel: [ 0.433160] pci_bus 0000:0c: resource 2 [mem 0x80000000-0x801fffff 64bit pref] Oct 1 21:23:30 Hilbert kernel: [ 0.433163] pci_bus 0000:0d: resource 0 [io 0xd000-0xdfff] Oct 1 21:23:30 Hilbert kernel: [ 0.433165] pci_bus 0000:0d: resource 1 [mem 0xf9c00000-0xf9efffff] Oct 1 21:23:30 Hilbert kernel: [ 0.433167] pci_bus 0000:0d: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] Oct 1 21:23:30 Hilbert kernel: [ 0.433170] pci_bus 0000:03: resource 1 [mem 0xf9b00000-0xf9bfffff] Oct 1 21:23:30 Hilbert kernel: [ 0.433173] pci_bus 0000:03: resource 4 [io 0x0000-0xffff] Oct 1 21:23:30 Hilbert kernel: [ 0.433175] pci_bus 0000:03: resource 5 [mem 0x00000000-0xfffffffff] Oct 1 21:23:30 Hilbert kernel: [ 0.433218] NET: Registered protocol family 2 Oct 1 21:23:30 Hilbert kernel: [ 0.433334] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) Oct 1 21:23:30 Hilbert kernel: [ 0.434058] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) Oct 1 21:23:30 Hilbert kernel: [ 0.436228] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) Oct 1 21:23:30 Hilbert kernel: [ 0.436815] TCP: Hash tables configured (established 262144 bind 65536) Oct 1 21:23:30 Hilbert kernel: [ 0.436818] TCP reno registered Oct 1 21:23:30 Hilbert kernel: [ 0.436826] UDP hash table entries: 1024 (order: 3, 32768 bytes) Oct 1 21:23:30 Hilbert kernel: [ 0.436848] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) Oct 1 21:23:30 Hilbert kernel: [ 0.436984] NET: Registered protocol family 1 Oct 1 21:23:30 Hilbert kernel: [ 0.437204] pci 0000:01:00.0: Boot video device Oct 1 21:23:30 Hilbert kernel: [ 0.437230] PCI: CLS 64 bytes, default 64 Oct 1 21:23:30 Hilbert kernel: [ 0.437255] Simple Boot Flag at 0x79 set to 0x1 Oct 1 21:23:30 Hilbert kernel: [ 0.437602] audit: initializing netlink socket (disabled) Oct 1 21:23:30 Hilbert kernel: [ 0.437617] type=2000 audit(1317496994.430:1): initialized Oct 1 21:23:30 Hilbert kernel: [ 0.465012] HugeTLB registered 2 MB page size, pre-allocated 0 pages Oct 1 21:23:30 Hilbert kernel: [ 0.477616] VFS: Disk quotas dquot_6.5.2 Oct 1 21:23:30 Hilbert kernel: [ 0.477677] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Oct 1 21:23:30 Hilbert kernel: [ 0.478271] fuse init (API version 7.16) Oct 1 21:23:30 Hilbert kernel: [ 0.478355] msgmni has been set to 3982 Oct 1 21:23:30 Hilbert kernel: [ 0.478682] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Oct 1 21:23:30 Hilbert kernel: [ 0.478713] io scheduler noop registered Oct 1 21:23:30 Hilbert kernel: [ 0.478715] io scheduler deadline registered Oct 1 21:23:30 Hilbert kernel: [ 0.478752] io scheduler cfq registered (default) Oct 1 21:23:30 Hilbert kernel: [ 0.478869] pcieport 0000:00:01.0: setting latency timer to 64 Oct 1 21:23:30 Hilbert kernel: [ 0.478904] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X Oct 1 21:23:30 Hilbert kernel: [ 0.478954] pcieport 0000:00:1c.0: setting latency timer to 64 Oct 1 21:23:30 Hilbert kernel: [ 0.479011] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X Oct 1 21:23:30 Hilbert kernel: [ 0.479090] pcieport 0000:00:1c.1: setting latency timer to 64 Oct 1 21:23:30 Hilbert kernel: [ 0.479147] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X Oct 1 21:23:30 Hilbert kernel: [ 0.479227] pcieport 0000:00:1c.3: setting latency timer to 64 Oct 1 21:23:30 Hilbert kernel: [ 0.479284] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X Oct 1 21:23:30 Hilbert kernel: [ 0.479379] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Oct 1 21:23:30 Hilbert kernel: [ 0.479401] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 Oct 1 21:23:30 Hilbert kernel: [ 0.479445] intel_idle: MWAIT substates: 0x22220 Oct 1 21:23:30 Hilbert kernel: [ 0.479447] intel_idle: does not run on family 6 model 15 Oct 1 21:23:30 Hilbert kernel: [ 0.479518] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared Oct 1 21:23:30 Hilbert kernel: [ 0.479567] ACPI: AC Adapter [AC] (off-line) Oct 1 21:23:30 Hilbert kernel: [ 0.479637] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 Oct 1 21:23:30 Hilbert kernel: [ 0.480170] ACPI: Lid Switch [LID] Oct 1 21:23:30 Hilbert kernel: [ 0.480214] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 Oct 1 21:23:30 Hilbert kernel: [ 0.480219] ACPI: Power Button [PBTN] Oct 1 21:23:30 Hilbert kernel: [ 0.480259] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 Oct 1 21:23:30 Hilbert kernel: [ 0.480263] ACPI: Sleep Button [SBTN] Oct 1 21:23:30 Hilbert kernel: [ 0.480288] ACPI: acpi_idle registered with cpuidle Oct 1 21:23:30 Hilbert kernel: [ 0.480433] Monitor-Mwait will be used to enter C-1 state Oct 1 21:23:30 Hilbert kernel: [ 0.480463] Monitor-Mwait will be used to enter C-2 state Oct 1 21:23:30 Hilbert kernel: [ 0.480488] Monitor-Mwait will be used to enter C-3 state Oct 1 21:23:30 Hilbert kernel: [ 0.480493] Marking TSC unstable due to TSC halts in idle Oct 1 21:23:30 Hilbert kernel: [ 0.505014] thermal LNXTHERM:00: registered as thermal_zone0 Oct 1 21:23:30 Hilbert kernel: [ 0.505017] ACPI: Thermal Zone [THM] (67 C) Oct 1 21:23:30 Hilbert kernel: [ 0.505044] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared Oct 1 21:23:30 Hilbert kernel: [ 0.505094] ERST: Table is not found! Oct 1 21:23:30 Hilbert kernel: [ 0.520215] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled Oct 1 21:23:30 Hilbert kernel: [ 0.523628] ACPI: Battery Slot [BAT0] (battery present) Oct 1 21:23:30 Hilbert kernel: [ 0.640835] Freeing initrd memory: 13416k freed Oct 1 21:23:30 Hilbert kernel: [ 0.711623] Linux agpgart interface v0.103 Oct 1 21:23:30 Hilbert kernel: [ 0.712863] brd: module loaded Oct 1 21:23:30 Hilbert kernel: [ 0.713374] loop: module loaded Oct 1 21:23:30 Hilbert kernel: [ 0.713521] ata_piix 0000:00:1f.1: version 2.13 Oct 1 21:23:30 Hilbert kernel: [ 0.713536] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Oct 1 21:23:30 Hilbert kernel: [ 0.713581] ata_piix 0000:00:1f.1: setting latency timer to 64 Oct 1 21:23:30 Hilbert kernel: [ 0.713902] scsi0 : ata_piix Oct 1 21:23:30 Hilbert kernel: [ 0.713994] scsi1 : ata_piix Oct 1 21:23:30 Hilbert kernel: [ 0.714283] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 Oct 1 21:23:30 Hilbert kernel: [ 0.714286] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 Oct 1 21:23:30 Hilbert kernel: [ 0.714337] ata2: port disabled. ignoring. Oct 1 21:23:30 Hilbert kernel: [ 0.714593] Fixed MDIO Bus: probed Oct 1 21:23:30 Hilbert kernel: [ 0.714618] PPP generic driver version 2.4.2 Oct 1 21:23:30 Hilbert kernel: [ 0.714655] tun: Universal TUN/TAP device driver, 1.6 Oct 1 21:23:30 Hilbert kernel: [ 0.714657] tun: (C) 1999-2004 Max Krasnyansky Oct 1 21:23:30 Hilbert kernel: [ 0.714731] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Oct 1 21:23:30 Hilbert kernel: [ 0.714756] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 Oct 1 21:23:30 Hilbert kernel: [ 0.714770] ehci_hcd 0000:00:1a.7: setting latency timer to 64 Oct 1 21:23:30 Hilbert kernel: [ 0.714774] ehci_hcd 0000:00:1a.7: EHCI Host Controller Oct 1 21:23:30 Hilbert kernel: [ 0.714808] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 Oct 1 21:23:30 Hilbert kernel: [ 0.714846] ehci_hcd 0000:00:1a.7: debug port 1 Oct 1 21:23:30 Hilbert kernel: [ 0.718713] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported Oct 1 21:23:30 Hilbert kernel: [ 0.718730] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 Oct 1 21:23:30 Hilbert kernel: [ 0.740018] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 Oct 1 21:23:30 Hilbert kernel: [ 0.740126] hub 1-0:1.0: USB hub found Oct 1 21:23:30 Hilbert kernel: [ 0.740132] hub 1-0:1.0: 4 ports detected Oct 1 21:23:30 Hilbert kernel: [ 0.740203] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Oct 1 21:23:30 Hilbert kernel: [ 0.740217] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Oct 1 21:23:30 Hilbert kernel: [ 0.740221] ehci_hcd 0000:00:1d.7: EHCI Host Controller Oct 1 21:23:30 Hilbert kernel: [ 0.740260] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 Oct 1 21:23:30 Hilbert kernel: [ 0.740292] ehci_hcd 0000:00:1d.7: debug port 1 Oct 1 21:23:30 Hilbert kernel: [ 0.744166] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported Oct 1 21:23:30 Hilbert kernel: [ 0.744182] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 Oct 1 21:23:30 Hilbert kernel: [ 0.760015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Oct 1 21:23:30 Hilbert kernel: [ 0.760124] hub 2-0:1.0: USB hub found Oct 1 21:23:30 Hilbert kernel: [ 0.760128] hub 2-0:1.0: 6 ports detected Oct 1 21:23:30 Hilbert kernel: [ 0.760208] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Oct 1 21:23:30 Hilbert kernel: [ 0.760221] uhci_hcd: USB Universal Host Controller Interface driver Oct 1 21:23:30 Hilbert kernel: [ 0.760244] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Oct 1 21:23:30 Hilbert kernel: [ 0.760251] uhci_hcd 0000:00:1a.0: setting latency timer to 64 Oct 1 21:23:30 Hilbert kernel: [ 0.760255] uhci_hcd 0000:00:1a.0: UHCI Host Controller Oct 1 21:23:30 Hilbert kernel: [ 0.760284] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 Oct 1 21:23:30 Hilbert kernel: [ 0.760314] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 Oct 1 21:23:30 Hilbert kernel: [ 0.760422] hub 3-0:1.0: USB hub found Oct 1 21:23:30 Hilbert kernel: [ 0.760426] hub 3-0:1.0: 2 ports detected Oct 1 21:23:30 Hilbert kernel: [ 0.760493] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 Oct 1 21:23:30 Hilbert kernel: [ 0.760499] uhci_hcd 0000:00:1a.1: setting latency timer to 64 Oct 1 21:23:30 Hilbert kernel: [ 0.760503] uhci_hcd 0000:00:1a.1: UHCI Host Controller Oct 1 21:23:30 Hilbert kernel: [ 0.760544] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 Oct 1 21:23:30 Hilbert kernel: [ 0.760584] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 Oct 1 21:23:30 Hilbert kernel: [ 0.760697] hub 4-0:1.0: USB hub found Oct 1 21:23:30 Hilbert kernel: [ 0.760701] hub 4-0:1.0: 2 ports detected Oct 1 21:23:30 Hilbert kernel: [ 0.760762] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Oct 1 21:23:30 Hilbert kernel: [ 0.760769] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Oct 1 21:23:30 Hilbert kernel: [ 0.760773] uhci_hcd 0000:00:1d.0: UHCI Host Controller Oct 1 21:23:30 Hilbert kernel: [ 0.760805] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 Oct 1 21:23:30 Hilbert kernel: [ 0.760834] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 Oct 1 21:23:30 Hilbert kernel: [ 0.760948] hub 5-0:1.0: USB hub found Oct 1 21:23:30 Hilbert kernel: [ 0.760952] hub 5-0:1.0: 2 ports detected Oct 1 21:23:30 Hilbert kernel: [ 0.761013] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 Oct 1 21:23:30 Hilbert kernel: [ 0.761020] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Oct 1 21:23:30 Hilbert kernel: [ 0.761023] uhci_hcd 0000:00:1d.1: UHCI Host Controller Oct 1 21:23:30 Hilbert kernel: [ 0.761053] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 Oct 1 21:23:30 Hilbert kernel: [ 0.761082] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 Oct 1 21:23:30 Hilbert kernel: [ 0.761195] hub 6-0:1.0: USB hub found Oct 1 21:23:30 Hilbert kernel: [ 0.761199] hub 6-0:1.0: 2 ports detected Oct 1 21:23:30 Hilbert kernel: [ 0.761261] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 Oct 1 21:23:30 Hilbert kernel: [ 0.761268] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Oct 1 21:23:30 Hilbert kernel: [ 0.761271] uhci_hcd 0000:00:1d.2: UHCI Host Controller Oct 1 21:23:30 Hilbert kernel: [ 0.761307] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 Oct 1 21:23:30 Hilbert kernel: [ 0.761337] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 Oct 1 21:23:30 Hilbert kernel: [ 0.761448] hub 7-0:1.0: USB hub found Oct 1 21:23:30 Hilbert kernel: [ 0.761451] hub 7-0:1.0: 2 ports detected Oct 1 21:23:30 Hilbert kernel: [ 0.761555] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 Oct 1 21:23:30 Hilbert kernel: [ 0.764459] serio: i8042 KBD port at 0x60,0x64 irq 1 Oct 1 21:23:30 Hilbert kernel: [ 0.764467] serio: i8042 AUX port at 0x60,0x64 irq 12 Oct 1 21:23:30 Hilbert kernel: [ 0.764572] mousedev: PS/2 mouse device common for all mice Oct 1 21:23:30 Hilbert kernel: [ 0.764713] rtc_cmos 00:03: RTC can wake from S4 Oct 1 21:23:30 Hilbert kernel: [ 0.764840] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 Oct 1 21:23:30 Hilbert kernel: [ 0.764872] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs Oct 1 21:23:30 Hilbert kernel: [ 0.764978] device-mapper: uevent: version 1.0.3 Oct 1 21:23:30 Hilbert kernel: [ 0.765047] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com Oct 1 21:23:30 Hilbert kernel: [ 0.765108] cpuidle: using governor ladder Oct 1 21:23:30 Hilbert kernel: [ 0.765191] cpuidle: using governor menu Oct 1 21:23:30 Hilbert kernel: [ 0.765193] EFI Variables Facility v0.08 2004-May-17 Oct 1 21:23:30 Hilbert kernel: [ 0.765443] TCP cubic registered Oct 1 21:23:30 Hilbert kernel: [ 0.765564] NET: Registered protocol family 10 Oct 1 21:23:30 Hilbert kernel: [ 0.766025] NET: Registered protocol family 17 Oct 1 21:23:30 Hilbert kernel: [ 0.766041] Registering the dns_resolver key type Oct 1 21:23:30 Hilbert kernel: [ 0.766128] PM: Hibernation image not present or could not be loaded. Oct 1 21:23:30 Hilbert kernel: [ 0.766144] registered taskstats version 1 Oct 1 21:23:30 Hilbert kernel: [ 0.773528] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 Oct 1 21:23:30 Hilbert kernel: [ 0.779136] Magic number: 15:935:393 Oct 1 21:23:30 Hilbert kernel: [ 0.779257] rtc_cmos 00:03: setting system clock to 2011-10-01 19:23:15 UTC (1317496995) Oct 1 21:23:30 Hilbert kernel: [ 0.780142] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found Oct 1 21:23:30 Hilbert kernel: [ 0.780144] EDD information not available. Oct 1 21:23:30 Hilbert kernel: [ 0.900585] ata1.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, D200, max UDMA/33 Oct 1 21:23:30 Hilbert kernel: [ 0.940481] ata1.00: configured for UDMA/33 Oct 1 21:23:30 Hilbert kernel: [ 0.947377] scsi 0:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632H D200 PQ: 0 ANSI: 5 Oct 1 21:23:30 Hilbert kernel: [ 0.954600] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Oct 1 21:23:30 Hilbert kernel: [ 0.954605] cdrom: Uniform CD-ROM driver Revision: 3.20 Oct 1 21:23:30 Hilbert kernel: [ 0.954769] sr 0:0:0:0: Attached scsi CD-ROM sr0 Oct 1 21:23:30 Hilbert kernel: [ 0.954855] sr 0:0:0:0: Attached scsi generic sg0 type 5 Oct 1 21:23:30 Hilbert kernel: [ 0.956587] Freeing unused kernel memory: 984k freed Oct 1 21:23:30 Hilbert kernel: [ 0.956914] Write protecting the kernel read-only data: 10240k Oct 1 21:23:30 Hilbert kernel: [ 0.957184] Freeing unused kernel memory: 20k freed Oct 1 21:23:30 Hilbert kernel: [ 0.961708] Freeing unused kernel memory: 1400k freed Oct 1 21:23:30 Hilbert kernel: [ 1.035333] ahci 0000:00:1f.2: version 3.0 Oct 1 21:23:30 Hilbert kernel: [ 1.035350] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Oct 1 21:23:30 Hilbert kernel: [ 1.035411] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X Oct 1 21:23:30 Hilbert kernel: [ 1.035478] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode Oct 1 21:23:30 Hilbert kernel: [ 1.035482] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems Oct 1 21:23:30 Hilbert kernel: [ 1.035488] ahci 0000:00:1f.2: setting latency timer to 64 Oct 1 21:23:30 Hilbert kernel: [ 1.046499] sdhci: Secure Digital Host Controller Interface driver Oct 1 21:23:30 Hilbert kernel: [ 1.046502] sdhci: Copyright(c) Pierre Ossman Oct 1 21:23:30 Hilbert kernel: [ 1.046749] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22) Oct 1 21:23:30 Hilbert kernel: [ 1.046774] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 Oct 1 21:23:30 Hilbert kernel: [ 1.047831] mmc0: no vmmc regulator found Oct 1 21:23:30 Hilbert kernel: [ 1.048868] Registered led device: mmc0:: Oct 1 21:23:30 Hilbert kernel: [ 1.051425] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA Oct 1 21:23:30 Hilbert kernel: [ 1.051725] firewire_ohci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 Oct 1 21:23:30 Hilbert kernel: [ 1.051810] scsi2 : ahci Oct 1 21:23:30 Hilbert kernel: [ 1.055013] scsi3 : ahci Oct 1 21:23:30 Hilbert kernel: [ 1.059356] scsi4 : ahci Oct 1 21:23:30 Hilbert kernel: [ 1.059525] ata3: SATA max UDMA/133 abar m2048@0xfebfb800 port 0xfebfb900 irq 44 Oct 1 21:23:30 Hilbert kernel: [ 1.059527] ata4: DUMMY Oct 1 21:23:30 Hilbert kernel: [ 1.059531] ata5: SATA max UDMA/133 abar m2048@0xfebfb800 port 0xfebfba00 irq 44 Oct 1 21:23:30 Hilbert kernel: [ 1.130199] firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1 Oct 1 21:23:30 Hilbert kernel: [ 1.180045] usb 2-6: new high speed USB device number 2 using ehci_hcd Oct 1 21:23:30 Hilbert kernel: [ 1.390098] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 1 21:23:30 Hilbert kernel: [ 1.391363] ata3.00: ATA-7: ST9200420AS, 3.ADC, max UDMA/133 Oct 1 21:23:30 Hilbert kernel: [ 1.391368] ata3.00: 390721968 sectors, multi 8: LBA48 NCQ (depth 31/32) Oct 1 21:23:30 Hilbert kernel: [ 1.392888] ata3.00: configured for UDMA/133 Oct 1 21:23:30 Hilbert kernel: [ 1.393090] scsi 2:0:0:0: Direct-Access ATA ST9200420AS 3.AD PQ: 0 ANSI: 5 Oct 1 21:23:30 Hilbert kernel: [ 1.393245] sd 2:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB) Oct 1 21:23:30 Hilbert kernel: [ 1.393248] sd 2:0:0:0: Attached scsi generic sg1 type 0 Oct 1 21:23:30 Hilbert kernel: [ 1.393337] sd 2:0:0:0: [sda] Write Protect is off Oct 1 21:23:30 Hilbert kernel: [ 1.393341] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 Oct 1 21:23:30 Hilbert kernel: [ 1.393366] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 1 21:23:30 Hilbert kernel: [ 1.410064] ata5: SATA link down (SStatus 0 SControl 300) Oct 1 21:23:30 Hilbert kernel: [ 1.426737] sda: sda1 sda2 sda3 < sda5 > Oct 1 21:23:30 Hilbert kernel: [ 1.427130] sd 2:0:0:0: [sda] Attached SCSI disk Oct 1 21:23:30 Hilbert kernel: [ 1.427597] b44 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Oct 1 21:23:30 Hilbert kernel: [ 1.470142] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) Oct 1 21:23:30 Hilbert kernel: [ 1.470154] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) Oct 1 21:23:30 Hilbert kernel: [ 1.470164] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) Oct 1 21:23:30 Hilbert kernel: [ 1.550090] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 Oct 1 21:23:30 Hilbert kernel: [ 1.550114] b44: b44.c:v2.0 Oct 1 21:23:30 Hilbert kernel: [ 1.600852] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:1d:09:a8:97:4c Oct 1 21:23:30 Hilbert kernel: [ 1.630054] usb 3-2: new full speed USB device number 2 using uhci_hcd Oct 1 21:23:30 Hilbert kernel: [ 1.640194] firewire_core: created device fw0: GUID 484fc000188ba470, S400 Oct 1 21:23:30 Hilbert kernel: [ 1.822481] hub 3-2:1.0: USB hub found Oct 1 21:23:30 Hilbert kernel: [ 1.824418] hub 3-2:1.0: 3 ports detected Oct 1 21:23:30 Hilbert kernel: [ 1.991147] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) Oct 1 21:23:30 Hilbert kernel: [ 2.121429] usb 3-2.1: new full speed USB device number 3 using uhci_hcd Oct 1 21:23:30 Hilbert kernel: [ 2.341439] usb 3-2.2: new full speed USB device number 4 using uhci_hcd Oct 1 21:23:30 Hilbert kernel: [ 2.561441] usb 3-2.3: new full speed USB device number 5 using uhci_hcd Oct 1 21:23:30 Hilbert kernel: [ 13.128150] lp: driver loaded but no devices found Oct 1 21:23:30 Hilbert kernel: [ 13.194067] wmi: Mapper loaded Oct 1 21:23:30 Hilbert kernel: [ 13.199775] Adding 1950716k swap on /dev/sda5. Priority:-1 extents:1 across:1950716k Oct 1 21:23:30 Hilbert kernel: [ 13.233479] nvidia: module license 'NVIDIA' taints kernel. Oct 1 21:23:30 Hilbert kernel: [ 13.233484] Disabling lock debugging due to kernel taint Oct 1 21:23:30 Hilbert kernel: [ 13.438917] cfg80211: Calling CRDA to update world regulatory domain Oct 1 21:23:30 Hilbert kernel: [ 13.501225] Bluetooth: Core ver 2.16 Oct 1 21:23:30 Hilbert kernel: [ 13.501270] NET: Registered protocol family 31 Oct 1 21:23:30 Hilbert kernel: [ 13.501272] Bluetooth: HCI device and connection manager initialized Oct 1 21:23:30 Hilbert kernel: [ 13.501275] Bluetooth: HCI socket layer initialized Oct 1 21:23:30 Hilbert kernel: [ 13.501277] Bluetooth: L2CAP socket layer initialized Oct 1 21:23:30 Hilbert kernel: [ 13.504989] r852 0000:03:01.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 Oct 1 21:23:30 Hilbert kernel: [ 13.505476] acpi device:31: registered as cooling_device2 Oct 1 21:23:30 Hilbert kernel: [ 13.506032] Bluetooth: SCO socket layer initialized Oct 1 21:23:30 Hilbert kernel: [ 13.506349] Bluetooth: Generic Bluetooth USB driver ver 0.6 Oct 1 21:23:30 Hilbert kernel: [ 13.506397] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2e/LNXVIDEO:00/input/input4 Oct 1 21:23:30 Hilbert kernel: [ 13.506469] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) Oct 1 21:23:30 Hilbert kernel: [ 13.506516] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. Oct 1 21:23:30 Hilbert kernel: [ 13.548217] usbcore: registered new interface driver btusb Oct 1 21:23:30 Hilbert kernel: [ 13.549280] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s Oct 1 21:23:30 Hilbert kernel: [ 13.549283] iwl3945: Copyright(c) 2003-2011 Intel Corporation Oct 1 21:23:30 Hilbert kernel: [ 13.549355] iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Oct 1 21:23:30 Hilbert kernel: [ 13.549369] iwl3945 0000:0c:00.0: setting latency timer to 64 Oct 1 21:23:30 Hilbert kernel: [ 13.648422] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) Oct 1 21:23:30 Hilbert kernel: [ 13.687380] iwl3945 0000:0c:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels Oct 1 21:23:30 Hilbert kernel: [ 13.687384] iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG Oct 1 21:23:30 Hilbert kernel: [ 13.687534] iwl3945 0000:0c:00.0: irq 45 for MSI/MSI-X Oct 1 21:23:30 Hilbert kernel: [ 13.704891] r852: driver loaded successfully Oct 1 21:23:30 Hilbert kernel: [ 13.705596] Registered led device: phy0-led Oct 1 21:23:30 Hilbert kernel: [ 13.705642] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain Oct 1 21:23:30 Hilbert kernel: [ 13.725194] Linux video capture interface: v2.00 Oct 1 21:23:30 Hilbert kernel: [ 13.729567] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs' Oct 1 21:23:30 Hilbert kernel: [ 13.731858] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640) Oct 1 21:23:30 Hilbert kernel: [ 13.733865] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input5 Oct 1 21:23:30 Hilbert kernel: [ 13.734365] generic-usb 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0 Oct 1 21:23:30 Hilbert kernel: [ 13.749403] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. Oct 1 21:23:30 Hilbert kernel: [ 13.749680] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input6 Oct 1 21:23:30 Hilbert kernel: [ 13.750644] generic-usb 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0 Oct 1 21:23:30 Hilbert kernel: [ 13.750688] usbcore: registered new interface driver usbhid Oct 1 21:23:30 Hilbert kernel: [ 13.750690] usbhid: USB HID core driver Oct 1 21:23:30 Hilbert kernel: [ 13.751090] input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input7 Oct 1 21:23:30 Hilbert kernel: [ 13.751203] usbcore: registered new interface driver uvcvideo Oct 1 21:23:30 Hilbert kernel: [ 13.751205] USB Video Class driver (v1.1.0) Oct 1 21:23:30 Hilbert kernel: [ 13.789963] input: Dell WMI hotkeys as /devices/virtual/input/input8 Oct 1 21:23:30 Hilbert kernel: [ 14.069476] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain Oct 1 21:23:30 Hilbert kernel: [ 14.069480] cfg80211: World regulatory domain updated: Oct 1 21:23:30 Hilbert kernel: [ 14.069481] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Oct 1 21:23:30 Hilbert kernel: [ 14.069484] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 1 21:23:30 Hilbert kernel: [ 14.069487] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 1 21:23:30 Hilbert kernel: [ 14.069490] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 1 21:23:30 Hilbert kernel: [ 14.069493] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 1 21:23:30 Hilbert kernel: [ 14.069495] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 1 21:23:30 Hilbert kernel: [ 14.076205] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 Oct 1 21:23:30 Hilbert kernel: [ 14.076271] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X Oct 1 21:23:30 Hilbert kernel: [ 14.076303] HDA Intel 0000:00:1b.0: setting latency timer to 64 Oct 1 21:23:30 Hilbert kernel: [ 14.098222] type=1400 audit(1317497008.809:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=722 comm="apparmor_parser" Oct 1 21:23:30 Hilbert kernel: [ 14.098474] type=1400 audit(1317497008.809:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=722 comm="apparmor_parser" Oct 1 21:23:30 Hilbert kernel: [ 14.098642] type=1400 audit(1317497008.809:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=722 comm="apparmor_parser" Oct 1 21:23:30 Hilbert kernel: [ 14.220512] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 Oct 1 21:23:30 Hilbert kernel: [ 14.220700] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 Oct 1 21:23:30 Hilbert kernel: [ 14.224344] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04793/0x300000/0x0 Oct 1 21:23:30 Hilbert kernel: [ 14.224351] serio: Synaptics pass-through port at isa0060/serio1/input0 Oct 1 21:23:30 Hilbert kernel: [ 14.260039] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11 Oct 1 21:23:30 Hilbert kernel: [ 14.302606] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Oct 1 21:23:30 Hilbert kernel: [ 14.302619] nvidia 0000:01:00.0: setting latency timer to 64 Oct 1 21:23:30 Hilbert kernel: [ 14.302625] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem Oct 1 21:23:30 Hilbert kernel: [ 14.302777] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 280.13 Wed Jul 27 16:53:56 PDT 2011 Oct 1 21:23:30 Hilbert kernel: [ 14.532504] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro Oct 1 21:23:30 Hilbert kernel: [ 14.730696] init: udev-fallback-graphics main process (843) terminated with status 1 Oct 1 21:23:30 Hilbert kernel: [ 14.753512] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) Oct 1 21:23:30 Hilbert modem-manager[911]: ModemManager (version 0.5) starting... Oct 1 21:23:30 Hilbert NetworkManager[914]: NetworkManager (version 0.9.1.90) is starting... Oct 1 21:23:30 Hilbert NetworkManager[914]: Read config file /etc/NetworkManager/NetworkManager.conf Oct 1 21:23:30 Hilbert modem-manager[911]: Loaded plugin Gobi Oct 1 21:23:30 Hilbert modem-manager[911]: Loaded plugin MotoC Oct 1 21:23:30 Hilbert modem-manager[911]: Loaded plugin Huawei Oct 1 21:23:30 Hilbert modem-manager[911]: Loaded plugin Linktop Oct 1 21:23:30 Hilbert modem-manager[911]: Loaded plugin Nokia Oct 1 21:23:30 Hilbert modem-manager[911]: Loaded plugin ZTE Oct 1 21:23:30 Hilbert modem-manager[911]: Loaded plugin SimTech Oct 1 21:23:30 Hilbert NetworkManager[914]: VPN: loaded org.freedesktop.NetworkManager.pptp Oct 1 21:23:30 Hilbert modem-manager[911]: Loaded plugin Option Oct 1 21:23:30 Hilbert modem-manager[911]: Loaded plugin Longcheer Oct 1 21:23:30 Hilbert modem-manager[911]: Loaded plugin Ericsson MBM Oct 1 21:23:30 Hilbert modem-manager[911]: Loaded plugin Option High-Speed Oct 1 21:23:30 Hilbert modem-manager[911]: Loaded plugin X22X Oct 1 21:23:30 Hilbert modem-manager[911]: Loaded plugin Generic Oct 1 21:23:30 Hilbert modem-manager[911]: Loaded plugin Novatel Oct 1 21:23:30 Hilbert modem-manager[911]: Loaded plugin Samsung Oct 1 21:23:30 Hilbert modem-manager[911]: Loaded plugin Sierra Oct 1 21:23:30 Hilbert modem-manager[911]: Loaded plugin AnyData Oct 1 21:23:30 Hilbert modem-manager[911]: Loaded plugin Wavecom Oct 1 21:23:30 Hilbert kernel: [ 16.251508] ppdev: user-space parallel port driver Oct 1 21:23:30 Hilbert kernel: [ 16.267197] type=1400 audit(1317497010.979:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=936 comm="apparmor_parser" Oct 1 21:23:30 Hilbert kernel: [ 16.267549] type=1400 audit(1317497010.979:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=936 comm="apparmor_parser" Oct 1 21:23:31 Hilbert kernel: [ 16.292042] type=1400 audit(1317497011.009:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=947 comm="apparmor_parser" Oct 1 21:23:31 Hilbert kernel: [ 16.294216] type=1400 audit(1317497011.009:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=948 comm="apparmor_parser" Oct 1 21:23:31 Hilbert kernel: [ 16.294485] type=1400 audit(1317497011.009:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=948 comm="apparmor_parser" Oct 1 21:23:31 Hilbert kernel: [ 16.294656] type=1400 audit(1317497011.009:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=948 comm="apparmor_parser" Oct 1 21:23:31 Hilbert kernel: [ 16.299062] type=1400 audit(1317497011.009:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=949 comm="apparmor_parser" Oct 1 21:23:31 Hilbert NetworkManager[914]: SCPlugin-Ifupdown: init! Oct 1 21:23:31 Hilbert NetworkManager[914]: SCPlugin-Ifupdown: update_system_hostname Oct 1 21:23:31 Hilbert NetworkManager[914]: SCPluginIfupdown: management mode: unmanaged Oct 1 21:23:31 Hilbert NetworkManager[914]: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/net/wlan0, iface: wlan0) Oct 1 21:23:31 Hilbert NetworkManager[914]: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/net/wlan0, iface: wlan0): no ifupdown configuration found. Oct 1 21:23:31 Hilbert NetworkManager[914]: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1e.0/0000:03:00.0/ssb0:0/net/eth0, iface: eth0) Oct 1 21:23:31 Hilbert NetworkManager[914]: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1e.0/0000:03:00.0/ssb0:0/net/eth0, iface: eth0): no ifupdown configuration found. Oct 1 21:23:31 Hilbert NetworkManager[914]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo) Oct 1 21:23:31 Hilbert NetworkManager[914]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found. Oct 1 21:23:31 Hilbert NetworkManager[914]: SCPlugin-Ifupdown: end _init. Oct 1 21:23:31 Hilbert NetworkManager[914]: Loaded plugin ifupdown: (C) 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list. Oct 1 21:23:31 Hilbert NetworkManager[914]: Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list. Oct 1 21:23:31 Hilbert NetworkManager[914]: Ifupdown: get unmanaged devices count: 0 Oct 1 21:23:31 Hilbert NetworkManager[914]: SCPlugin-Ifupdown: (28079920) ... get_connections. Oct 1 21:23:31 Hilbert NetworkManager[914]: SCPlugin-Ifupdown: (28079920) ... get_connections (managed=false): return empty list. Oct 1 21:23:31 Hilbert NetworkManager[914]: keyfile: parsing Condivisa ... Oct 1 21:23:31 Hilbert NetworkManager[914]: keyfile: read connection 'Condivisa' Oct 1 21:23:31 Hilbert NetworkManager[914]: keyfile: parsing Alice-37768910 ... Oct 1 21:23:31 Hilbert NetworkManager[914]: keyfile: read connection 'Alice-37768910' Oct 1 21:23:31 Hilbert NetworkManager[914]: keyfile: parsing Cavo ... Oct 1 21:23:31 Hilbert NetworkManager[914]: keyfile: read connection 'Cavo' Oct 1 21:23:31 Hilbert NetworkManager[914]: Ifupdown: get unmanaged devices count: 0 Oct 1 21:23:31 Hilbert NetworkManager[914]: modem-manager is now available Oct 1 21:23:31 Hilbert NetworkManager[914]: monitoring kernel firmware directory '/lib/firmware'. Oct 1 21:23:31 Hilbert NetworkManager[914]: found WiFi radio killswitch rfkill1 (at /sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/ieee80211/phy0/rfkill1) (driver (unknown)) Oct 1 21:23:31 Hilbert NetworkManager[914]: found WiFi radio killswitch rfkill2 (at /sys/devices/platform/dell-laptop/rfkill/rfkill2) (driver dell-laptop) Oct 1 21:23:31 Hilbert NetworkManager[914]: WiFi enabled by radio killswitch; enabled by state file Oct 1 21:23:31 Hilbert NetworkManager[914]: WWAN enabled by radio killswitch; enabled by state file Oct 1 21:23:31 Hilbert NetworkManager[914]: WiMAX enabled by radio killswitch; enabled by state file Oct 1 21:23:31 Hilbert NetworkManager[914]: Networking is enabled by state file Oct 1 21:23:31 Hilbert NetworkManager[914]: (wlan0): driver supports SSID scans (scan_capa 0x01). Oct 1 21:23:31 Hilbert NetworkManager[914]: (wlan0): new 802.11 WiFi device (driver: 'iwl3945' ifindex: 3) Oct 1 21:23:31 Hilbert NetworkManager[914]: (wlan0): exported as /org/freedesktop/NetworkManager/Devices/0 Oct 1 21:23:31 Hilbert NetworkManager[914]: (wlan0): now managed Oct 1 21:23:31 Hilbert NetworkManager[914]: (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Oct 1 21:23:31 Hilbert NetworkManager[914]: (wlan0): bringing up device. Oct 1 21:23:31 Hilbert kernel: [ 16.401006] iwl3945 0000:0c:00.0: loaded firmware version 15.32.2.9 Oct 1 21:23:31 Hilbert NetworkManager[914]: (wlan0): preparing device. Oct 1 21:23:31 Hilbert NetworkManager[914]: (wlan0): deactivating device (reason 'managed') [2] Oct 1 21:23:31 Hilbert NetworkManager[914]: (eth0): carrier is OFF Oct 1 21:23:31 Hilbert NetworkManager[914]: (eth0): new Ethernet device (driver: 'b44' ifindex: 2) Oct 1 21:23:31 Hilbert NetworkManager[914]: (eth0): exported as /org/freedesktop/NetworkManager/Devices/1 Oct 1 21:23:31 Hilbert NetworkManager[914]: (eth0): now managed Oct 1 21:23:31 Hilbert NetworkManager[914]: (eth0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Oct 1 21:23:31 Hilbert NetworkManager[914]: (eth0): bringing up device. Oct 1 21:23:31 Hilbert NetworkManager[914]: (eth0): preparing device. Oct 1 21:23:31 Hilbert NetworkManager[914]: (eth0): deactivating device (reason 'managed') [2] Oct 1 21:23:31 Hilbert kernel: [ 16.471927] ADDRCONF(NETDEV_UP): wlan0: link is not ready Oct 1 21:23:31 Hilbert kernel: [ 16.478728] ADDRCONF(NETDEV_UP): eth0: link is not ready Oct 1 21:23:31 Hilbert NetworkManager[914]: bluez error getting default adapter: The name org.bluez was not provided by any .service files Oct 1 21:23:31 Hilbert NetworkManager[914]: wpa_supplicant started Oct 1 21:23:31 Hilbert NetworkManager[914]: (wlan0): supplicant interface state: starting -> ready Oct 1 21:23:31 Hilbert NetworkManager[914]: (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42] Oct 1 21:23:31 Hilbert NetworkManager[914]: (wlan0): supplicant interface state: ready -> inactive Oct 1 21:23:31 Hilbert kernel: [ 16.758076] Bluetooth: RFCOMM TTY layer initialized Oct 1 21:23:31 Hilbert kernel: [ 16.758081] Bluetooth: RFCOMM socket layer initialized Oct 1 21:23:31 Hilbert kernel: [ 16.758083] Bluetooth: RFCOMM ver 1.11 Oct 1 21:23:31 Hilbert NetworkManager[914]: bluez error getting default adapter: No such adapter Oct 1 21:23:31 Hilbert kernel: [ 16.761681] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Oct 1 21:23:31 Hilbert kernel: [ 16.761683] Bluetooth: BNEP filters: protocol multicast Oct 1 21:23:32 Hilbert kernel: [ 17.355597] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600 Oct 1 21:23:32 Hilbert kernel: [ 17.448761] EXT4-fs (sda2): re-mounted. Opts: commit=600 Oct 1 21:23:34 Hilbert kernel: [ 19.434745] init: plymouth-upstart-bridge main process (904) killed by TERM signal Oct 1 21:23:35 Hilbert kernel: [ 20.689217] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600 Oct 1 21:23:35 Hilbert kernel: [ 20.697436] EXT4-fs (sda2): re-mounted. Opts: commit=600 Oct 1 21:23:35 Hilbert NetworkManager[914]: Auto-activating connection 'Alice-37768910'. Oct 1 21:23:35 Hilbert NetworkManager[914]: Activation (wlan0) starting connection 'Alice-37768910' Oct 1 21:23:35 Hilbert NetworkManager[914]: (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0] Oct 1 21:23:35 Hilbert NetworkManager[914]: Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled... Oct 1 21:23:35 Hilbert NetworkManager[914]: Activation (wlan0) Stage 1 of 5 (Device Prepare) started... Oct 1 21:23:35 Hilbert NetworkManager[914]: Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled... Oct 1 21:23:35 Hilbert NetworkManager[914]: Activation (wlan0) Stage 1 of 5 (Device Prepare) complete. Oct 1 21:23:35 Hilbert NetworkManager[914]: Activation (wlan0) Stage 2 of 5 (Device Configure) starting... Oct 1 21:23:35 Hilbert NetworkManager[914]: (wlan0): device state change: prepare -> config (reason 'none') [40 50 0] Oct 1 21:23:35 Hilbert NetworkManager[914]: Activation (wlan0/wireless): connection 'Alice-37768910' has security, and secrets exist. No new secrets needed. Oct 1 21:23:35 Hilbert NetworkManager[914]: Config: added 'ssid' value 'Alice-37768910' Oct 1 21:23:35 Hilbert NetworkManager[914]: Config: added 'scan_ssid' value '1' Oct 1 21:23:35 Hilbert NetworkManager[914]: Config: added 'key_mgmt' value 'WPA-PSK' Oct 1 21:23:35 Hilbert NetworkManager[914]: Config: added 'psk' value '' Oct 1 21:23:35 Hilbert NetworkManager[914]: Activation (wlan0) Stage 2 of 5 (Device Configure) complete. Oct 1 21:23:35 Hilbert NetworkManager[914]: Config: set interface ap_scan to 1 Oct 1 21:23:36 Hilbert NetworkManager[914]: (wlan0): supplicant interface state: inactive -> scanning Oct 1 21:23:39 Hilbert wpa_supplicant[1044]: Trying to authenticate with 00:23:8e:4b:11:70 (SSID='Alice-37768910' freq=2412 MHz) Oct 1 21:23:39 Hilbert wpa_supplicant[1044]: Trying to associate with 00:23:8e:4b:11:70 (SSID='Alice-37768910' freq=2412 MHz) Oct 1 21:23:39 Hilbert NetworkManager[914]: (wlan0): supplicant interface state: scanning -> associating Oct 1 21:23:39 Hilbert wpa_supplicant[1044]: Associated with 00:23:8e:4b:11:70 Oct 1 21:23:39 Hilbert kernel: [ 24.842390] wlan0: authenticate with 00:23:8e:4b:11:70 (try 1) Oct 1 21:23:39 Hilbert kernel: [ 24.844250] wlan0: authenticated Oct 1 21:23:39 Hilbert kernel: [ 24.844422] wlan0: associate with 00:23:8e:4b:11:70 (try 1) Oct 1 21:23:39 Hilbert kernel: [ 24.846816] wlan0: RX AssocResp from 00:23:8e:4b:11:70 (capab=0x411 status=0 aid=1) Oct 1 21:23:39 Hilbert kernel: [ 24.846822] wlan0: associated Oct 1 21:23:39 Hilbert kernel: [ 24.848576] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Oct 1 21:23:39 Hilbert NetworkManager[914]: (wlan0): supplicant interface state: associating -> 4-way handshake Oct 1 21:23:39 Hilbert NetworkManager[914]: (wlan0): supplicant interface state: 4-way handshake -> group handshake Oct 1 21:23:39 Hilbert wpa_supplicant[1044]: WPA: Key negotiation completed with 00:23:8e:4b:11:70 [PTK=TKIP GTK=TKIP] Oct 1 21:23:39 Hilbert wpa_supplicant[1044]: CTRL-EVENT-CONNECTED - Connection to 00:23:8e:4b:11:70 completed (auth) [id=0 id_str=] Oct 1 21:23:39 Hilbert NetworkManager[914]: (wlan0): supplicant interface state: group handshake -> completed Oct 1 21:23:39 Hilbert NetworkManager[914]: Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Alice-37768910'. Oct 1 21:23:39 Hilbert NetworkManager[914]: Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled. Oct 1 21:23:39 Hilbert NetworkManager[914]: Activation (wlan0) Stage 3 of 5 (IP Configure Start) started... Oct 1 21:23:39 Hilbert NetworkManager[914]: (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0] Oct 1 21:23:39 Hilbert NetworkManager[914]: Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds) Oct 1 21:23:39 Hilbert NetworkManager[914]: dhclient started with pid 1517 Oct 1 21:23:39 Hilbert NetworkManager[914]: Activation (wlan0) Beginning IP6 addrconf. Oct 1 21:23:39 Hilbert NetworkManager[914]: Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete. Oct 1 21:23:39 Hilbert dhclient: Internet Systems Consortium DHCP Client 4.1.1-P1 Oct 1 21:23:39 Hilbert dhclient: Copyright 2004-2010 Internet Systems Consortium. Oct 1 21:23:39 Hilbert dhclient: All rights reserved. Oct 1 21:23:39 Hilbert dhclient: For info, please visit https://www.isc.org/software/dhcp/ Oct 1 21:23:39 Hilbert dhclient: Oct 1 21:23:39 Hilbert NetworkManager[914]: (wlan0): DHCPv4 state changed nbi -> preinit Oct 1 21:23:39 Hilbert dhclient: Listening on LPF/wlan0/00:1c:bf:61:5f:35 Oct 1 21:23:39 Hilbert dhclient: Sending on LPF/wlan0/00:1c:bf:61:5f:35 Oct 1 21:23:39 Hilbert dhclient: Sending on Socket/fallback Oct 1 21:23:39 Hilbert dhclient: DHCPREQUEST of 192.168.1.170 on wlan0 to 255.255.255.255 port 67 Oct 1 21:23:41 Hilbert dhclient: DHCPREQUEST of 192.168.1.170 on wlan0 to 255.255.255.255 port 67 Oct 1 21:23:42 Hilbert dhclient: DHCPNAK from 192.168.1.1 Oct 1 21:23:42 Hilbert NetworkManager[914]: (wlan0): DHCPv4 state changed preinit -> expire Oct 1 21:23:42 Hilbert dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 3 Oct 1 21:23:42 Hilbert NetworkManager[914]: (wlan0): DHCPv4 state changed expire -> preinit Oct 1 21:23:43 Hilbert dhclient: DHCPOFFER of 192.168.1.170 from 192.168.1.1 Oct 1 21:23:43 Hilbert dhclient: DHCPREQUEST of 192.168.1.170 on wlan0 to 255.255.255.255 port 67 Oct 1 21:23:43 Hilbert dhclient: DHCPACK of 192.168.1.170 from 192.168.1.1 Oct 1 21:23:43 Hilbert dhclient: bound to 192.168.1.170 -- renewal in 8811 seconds. Oct 1 21:23:43 Hilbert NetworkManager[914]: (wlan0): DHCPv4 state changed preinit -> bound Oct 1 21:23:43 Hilbert NetworkManager[914]: Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled... Oct 1 21:23:43 Hilbert NetworkManager[914]: Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started... Oct 1 21:23:43 Hilbert NetworkManager[914]: address 192.168.1.170 Oct 1 21:23:43 Hilbert NetworkManager[914]: prefix 24 (255.255.255.0) Oct 1 21:23:43 Hilbert NetworkManager[914]: gateway 192.168.1.1 Oct 1 21:23:43 Hilbert NetworkManager[914]: hostname 'Hilbert' Oct 1 21:23:43 Hilbert NetworkManager[914]: nameserver '192.168.1.1' Oct 1 21:23:43 Hilbert NetworkManager[914]: domain name 'homenet.telecomitalia.it' Oct 1 21:23:43 Hilbert NetworkManager[914]: Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started... Oct 1 21:23:44 Hilbert NetworkManager[914]: (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0] Oct 1 21:23:44 Hilbert NetworkManager[914]: Policy set 'Alice-37768910' (wlan0) as default for IPv4 routing and DNS. Oct 1 21:23:44 Hilbert NetworkManager[914]: Activation (wlan0) successful, device activated. Oct 1 21:23:44 Hilbert NetworkManager[914]: Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete. Oct 1 21:23:44 Hilbert NetworkManager[914]: Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete. Oct 1 21:23:50 Hilbert kernel: [ 35.810064] wlan0: no IPv6 routers present Oct 1 21:23:59 Hilbert NetworkManager[914]: (wlan0): IP6 addrconf timed out or failed. Oct 1 21:23:59 Hilbert NetworkManager[914]: Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) scheduled... Oct 1 21:23:59 Hilbert NetworkManager[914]: Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) started... Oct 1 21:23:59 Hilbert NetworkManager[914]: Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started... Oct 1 21:23:59 Hilbert NetworkManager[914]: Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete. Oct 1 21:23:59 Hilbert NetworkManager[914]: Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) complete. Oct 1 21:24:08 Hilbert kernel: [ 54.840065] CE: hpet increased min_delta_ns to 20113 nsec