Sep 26 20:08:35 Hilbert NetworkManager[916]: <info> kernel firmware directory '/lib/firmware' changed
Sep 26 20:11:11 Hilbert kernel: [ 3040.586668] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
Sep 26 20:11:11 Hilbert kernel: [ 3040.596873] SGI XFS Quota Management subsystem
Sep 26 20:11:11 Hilbert kernel: [ 3040.681462] JFS: nTxBlock = 8192, nTxLock = 65536
Sep 26 20:11:11 Hilbert kernel: [ 3041.122207] NTFS driver 2.1.30 [Flags: R/O MODULE].
Sep 26 20:11:11 Hilbert kernel: [ 3041.389463] QNX4 filesystem 0.2.3 registered.
Sep 26 20:11:11 Hilbert kernel: [ 3041.454994] Btrfs loaded
Sep 26 20:17:19 Hilbert kernel: [ 3409.489898] init: tty4 main process (1002) killed by TERM signal
Sep 26 20:17:19 Hilbert kernel: [ 3409.490851] init: tty5 main process (1008) killed by TERM signal
Sep 26 20:17:20 Hilbert kernel: [ 3409.636355] init: tty2 main process (1019) killed by TERM signal
Sep 26 20:17:20 Hilbert kernel: [ 3409.636680] init: tty3 main process (1020) killed by TERM signal
Sep 26 20:17:20 Hilbert kernel: [ 3409.636990] init: tty6 main process (1023) killed by TERM signal
Sep 26 20:17:20 Hilbert kernel: [ 3409.637579] init: irqbalance main process (1048) killed by TERM signal
Sep 26 20:17:20 Hilbert kernel: [ 3409.637953] init: cron main process (1053) killed by TERM signal
Sep 26 20:17:20 Hilbert kernel: [ 3409.638524] init: tty1 main process (1277) killed by TERM signal
Sep 26 20:17:20 Hilbert kernel: [ 3409.639546] init: plymouth-upstart-bridge main process (13529) terminated with status 1
Sep 26 20:17:20 Hilbert kernel: Kernel logging (proc) stopped.
Sep 26 20:19:17 Hilbert kernel: imklog 5.8.1, log source = /proc/kmsg started.
Sep 26 20:19:17 Hilbert kernel: [    0.000000] Initializing cgroup subsys cpuset
Sep 26 20:19:17 Hilbert kernel: [    0.000000] Initializing cgroup subsys cpu
Sep 26 20:19:17 Hilbert kernel: [    0.000000] Linux version 3.0.0-11-generic (buildd@crested) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu2) ) #18-Ubuntu SMP Tue Sep 13 23:38:01 UTC 2011 (Ubuntu 3.0.0-11.18-generic 3.0.4)
Sep 26 20:19:17 Hilbert kernel: [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-11-generic root=UUID=c49615ed-88be-4cff-812e-d4389247f03d ro quiet splash vt.handoff=7
Sep 26 20:19:17 Hilbert kernel: [    0.000000] KERNEL supported cpus:
Sep 26 20:19:17 Hilbert kernel: [    0.000000]   Intel GenuineIntel
Sep 26 20:19:17 Hilbert kernel: [    0.000000]   AMD AuthenticAMD
Sep 26 20:19:17 Hilbert kernel: [    0.000000]   Centaur CentaurHauls
Sep 26 20:19:17 Hilbert kernel: [    0.000000] BIOS-provided physical RAM map:
Sep 26 20:19:17 Hilbert kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
Sep 26 20:19:17 Hilbert kernel: [    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
Sep 26 20:19:17 Hilbert kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 000000007fe6d800 (usable)
Sep 26 20:19:17 Hilbert kernel: [    0.000000]  BIOS-e820: 000000007fe6d800 - 0000000080000000 (reserved)
Sep 26 20:19:17 Hilbert kernel: [    0.000000]  BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
Sep 26 20:19:17 Hilbert kernel: [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Sep 26 20:19:17 Hilbert kernel: [    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
Sep 26 20:19:17 Hilbert kernel: [    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
Sep 26 20:19:17 Hilbert kernel: [    0.000000]  BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
Sep 26 20:19:17 Hilbert kernel: [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
Sep 26 20:19:17 Hilbert kernel: [    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Sep 26 20:19:17 Hilbert kernel: [    0.000000] NX (Execute Disable) protection: active
Sep 26 20:19:17 Hilbert kernel: [    0.000000] DMI 2.4 present.
Sep 26 20:19:17 Hilbert kernel: [    0.000000] DMI: Dell Inc. Inspiron 1520                   /0KY768, BIOS A04 11/05/2007
Sep 26 20:19:17 Hilbert kernel: [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
Sep 26 20:19:17 Hilbert kernel: [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
Sep 26 20:19:17 Hilbert kernel: [    0.000000] No AGP bridge found
Sep 26 20:19:17 Hilbert kernel: [    0.000000] last_pfn = 0x7fe6d max_arch_pfn = 0x400000000
Sep 26 20:19:17 Hilbert kernel: [    0.000000] MTRR default type: uncachable
Sep 26 20:19:17 Hilbert kernel: [    0.000000] MTRR fixed ranges enabled:
Sep 26 20:19:17 Hilbert kernel: [    0.000000]   00000-9FFFF write-back
Sep 26 20:19:17 Hilbert kernel: [    0.000000]   A0000-BFFFF uncachable
Sep 26 20:19:17 Hilbert kernel: [    0.000000]   C0000-CFFFF write-protect
Sep 26 20:19:17 Hilbert kernel: [    0.000000]   D0000-EFFFF uncachable
Sep 26 20:19:17 Hilbert kernel: [    0.000000]   F0000-FFFFF write-protect
Sep 26 20:19:17 Hilbert kernel: [    0.000000] MTRR variable ranges enabled:
Sep 26 20:19:17 Hilbert kernel: [    0.000000]   0 base 000000000 mask F80000000 write-back
Sep 26 20:19:17 Hilbert kernel: [    0.000000]   1 base 07FF00000 mask FFFF00000 uncachable
Sep 26 20:19:17 Hilbert kernel: [    0.000000]   2 disabled
Sep 26 20:19:17 Hilbert kernel: [    0.000000]   3 disabled
Sep 26 20:19:17 Hilbert kernel: [    0.000000]   4 disabled
Sep 26 20:19:17 Hilbert kernel: [    0.000000]   5 disabled
Sep 26 20:19:17 Hilbert kernel: [    0.000000]   6 disabled
Sep 26 20:19:17 Hilbert kernel: [    0.000000]   7 disabled
Sep 26 20:19:17 Hilbert kernel: [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Sep 26 20:19:17 Hilbert kernel: [    0.000000] original variable MTRRs
Sep 26 20:19:17 Hilbert kernel: [    0.000000] reg 0, base: 0GB, range: 2GB, type WB
Sep 26 20:19:17 Hilbert kernel: [    0.000000] reg 1, base: 2047MB, range: 1MB, type UC
Sep 26 20:19:17 Hilbert kernel: [    0.000000] total RAM covered: 2047M
Sep 26 20:19:17 Hilbert kernel: [    0.000000] Found optimal setting for mtrr clean up
Sep 26 20:19:17 Hilbert kernel: [    0.000000]  gran_size: 64K 	chunk_size: 2M 	num_reg: 2  	lose cover RAM: 0G
Sep 26 20:19:17 Hilbert kernel: [    0.000000] New variable MTRRs
Sep 26 20:19:17 Hilbert kernel: [    0.000000] reg 0, base: 0GB, range: 2GB, type WB
Sep 26 20:19:17 Hilbert kernel: [    0.000000] reg 1, base: 2047MB, range: 1MB, type UC
Sep 26 20:19:17 Hilbert kernel: [    0.000000] initial memory mapped : 0 - 20000000
Sep 26 20:19:17 Hilbert kernel: [    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
Sep 26 20:19:17 Hilbert kernel: [    0.000000] init_memory_mapping: 0000000000000000-000000007fe6d000
Sep 26 20:19:17 Hilbert kernel: [    0.000000]  0000000000 - 007fe00000 page 2M
Sep 26 20:19:17 Hilbert kernel: [    0.000000]  007fe00000 - 007fe6d000 page 4k
Sep 26 20:19:17 Hilbert kernel: [    0.000000] kernel direct mapping tables up to 7fe6d000 @ 7fe69000-7fe6d000
Sep 26 20:19:17 Hilbert kernel: [    0.000000] RAMDISK: 365bc000 - 372d6000
Sep 26 20:19:17 Hilbert kernel: [    0.000000] ACPI: RSDP 00000000000fbbf0 00024 (v02 DELL  )
Sep 26 20:19:17 Hilbert kernel: [    0.000000] ACPI: XSDT 000000007fe6f200 0005C (v01 DELL    M08     27D70B05 ASL  00000061)
Sep 26 20:19:17 Hilbert kernel: [    0.000000] ACPI: FACP 000000007fe6f09c 000F4 (v04 DELL    M08     27D70B05 ASL  00000061)
Sep 26 20:19:17 Hilbert kernel: [    0.000000] ACPI: DSDT 000000007fe6f800 0565E (v02 INT430 SYSFexxx 00001001 INTL 20050624)
Sep 26 20:19:17 Hilbert kernel: [    0.000000] ACPI: FACS 000000007fe7e000 00040
Sep 26 20:19:17 Hilbert kernel: [    0.000000] ACPI: HPET 000000007fe6f300 00038 (v01 DELL    M08     00000001 ASL  00000061)
Sep 26 20:19:17 Hilbert kernel: [    0.000000] ACPI: APIC 000000007fe6f400 00068 (v01 DELL    M08     27D70B05 ASL  00000047)
Sep 26 20:19:17 Hilbert kernel: [    0.000000] ACPI: MCFG 000000007fe6f3c0 0003E (v16 DELL    M08     27D70B05 ASL  00000061)
Sep 26 20:19:17 Hilbert kernel: [    0.000000] ACPI: SLIC 000000007fe6f49c 00176 (v01 DELL    M08     27D70B05 ASL  00000061)
Sep 26 20:19:17 Hilbert kernel: [    0.000000] ACPI: BOOT 000000007fe6efc0 00028 (v01 DELL    M08     27D70B05 ASL  00000061)
Sep 26 20:19:17 Hilbert kernel: [    0.000000] ACPI: SSDT 000000007fe6d9bc 004CC (v01  PmRef    CpuPm 00003000 INTL 20050624)
Sep 26 20:19:17 Hilbert kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Sep 26 20:19:17 Hilbert kernel: [    0.000000] No NUMA configuration found
Sep 26 20:19:17 Hilbert kernel: [    0.000000] Faking a node at 0000000000000000-000000007fe6d000
Sep 26 20:19:17 Hilbert kernel: [    0.000000] Initmem setup node 0 0000000000000000-000000007fe6d000
Sep 26 20:19:17 Hilbert kernel: [    0.000000]   NODE_DATA [000000007fe64000 - 000000007fe68fff]
Sep 26 20:19:17 Hilbert kernel: [    0.000000]  [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0
Sep 26 20:19:17 Hilbert kernel: [    0.000000] Zone PFN ranges:
Sep 26 20:19:17 Hilbert kernel: [    0.000000]   DMA      0x00000010 -> 0x00001000
Sep 26 20:19:17 Hilbert kernel: [    0.000000]   DMA32    0x00001000 -> 0x00100000
Sep 26 20:19:17 Hilbert kernel: [    0.000000]   Normal   empty
Sep 26 20:19:17 Hilbert kernel: [    0.000000] Movable zone start PFN for each node
Sep 26 20:19:17 Hilbert kernel: [    0.000000] early_node_map[2] active PFN ranges
Sep 26 20:19:17 Hilbert kernel: [    0.000000]     0: 0x00000010 -> 0x0000009f
Sep 26 20:19:17 Hilbert kernel: [    0.000000]     0: 0x00000100 -> 0x0007fe6d
Sep 26 20:19:17 Hilbert kernel: [    0.000000] On node 0 totalpages: 523772
Sep 26 20:19:17 Hilbert kernel: [    0.000000]   DMA zone: 56 pages used for memmap
Sep 26 20:19:17 Hilbert kernel: [    0.000000]   DMA zone: 5 pages reserved
Sep 26 20:19:17 Hilbert kernel: [    0.000000]   DMA zone: 3922 pages, LIFO batch:0
Sep 26 20:19:17 Hilbert kernel: [    0.000000]   DMA32 zone: 7107 pages used for memmap
Sep 26 20:19:17 Hilbert kernel: [    0.000000]   DMA32 zone: 512682 pages, LIFO batch:31
Sep 26 20:19:17 Hilbert kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x1008
Sep 26 20:19:17 Hilbert kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Sep 26 20:19:17 Hilbert kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Sep 26 20:19:17 Hilbert kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Sep 26 20:19:17 Hilbert kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Sep 26 20:19:17 Hilbert kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Sep 26 20:19:17 Hilbert kernel: [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Sep 26 20:19:17 Hilbert kernel: [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Sep 26 20:19:17 Hilbert kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Sep 26 20:19:17 Hilbert kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Sep 26 20:19:17 Hilbert kernel: [    0.000000] ACPI: IRQ0 used by override.
Sep 26 20:19:17 Hilbert kernel: [    0.000000] ACPI: IRQ2 used by override.
Sep 26 20:19:17 Hilbert kernel: [    0.000000] ACPI: IRQ9 used by override.
Sep 26 20:19:17 Hilbert kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Sep 26 20:19:17 Hilbert kernel: [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Sep 26 20:19:17 Hilbert kernel: [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
Sep 26 20:19:17 Hilbert kernel: [    0.000000] nr_irqs_gsi: 40
Sep 26 20:19:17 Hilbert kernel: [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Sep 26 20:19:17 Hilbert kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Sep 26 20:19:17 Hilbert kernel: [    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:74000000)
Sep 26 20:19:17 Hilbert kernel: [    0.000000] Booting paravirtualized kernel on bare hardware
Sep 26 20:19:17 Hilbert kernel: [    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
Sep 26 20:19:17 Hilbert kernel: [    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007fc00000 s79616 r8192 d22784 u1048576
Sep 26 20:19:17 Hilbert kernel: [    0.000000] pcpu-alloc: s79616 r8192 d22784 u1048576 alloc=1*2097152
Sep 26 20:19:17 Hilbert kernel: [    0.000000] pcpu-alloc: [0] 0 1 
Sep 26 20:19:17 Hilbert kernel: [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 516604
Sep 26 20:19:17 Hilbert kernel: [    0.000000] Policy zone: DMA32
Sep 26 20:19:17 Hilbert kernel: [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-11-generic root=UUID=c49615ed-88be-4cff-812e-d4389247f03d ro quiet splash vt.handoff=7
Sep 26 20:19:17 Hilbert kernel: [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
Sep 26 20:19:17 Hilbert kernel: [    0.000000] Checking aperture...
Sep 26 20:19:17 Hilbert kernel: [    0.000000] No AGP bridge found
Sep 26 20:19:17 Hilbert kernel: [    0.000000] Calgary: detecting Calgary via BIOS EBDA area
Sep 26 20:19:17 Hilbert kernel: [    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Sep 26 20:19:17 Hilbert kernel: [    0.000000] Memory: 2039268k/2095540k available (6104k kernel code, 452k absent, 55820k reserved, 4880k data, 984k init)
Sep 26 20:19:17 Hilbert kernel: [    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Sep 26 20:19:17 Hilbert kernel: [    0.000000] Hierarchical RCU implementation.
Sep 26 20:19:17 Hilbert kernel: [    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
Sep 26 20:19:17 Hilbert kernel: [    0.000000] NR_IRQS:16640 nr_irqs:512 16
Sep 26 20:19:17 Hilbert kernel: [    0.000000] Extended CMOS year: 2000
Sep 26 20:19:17 Hilbert kernel: [    0.000000] vt handoff: transparent VT on vt#7
Sep 26 20:19:17 Hilbert kernel: [    0.000000] Console: colour VGA+ 80x25
Sep 26 20:19:17 Hilbert kernel: [    0.000000] console [tty0] enabled
Sep 26 20:19:17 Hilbert kernel: [    0.000000] allocated 16777216 bytes of page_cgroup
Sep 26 20:19:17 Hilbert kernel: [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Sep 26 20:19:17 Hilbert kernel: [    0.000000] hpet clockevent registered
Sep 26 20:19:17 Hilbert kernel: [    0.000000] Fast TSC calibration using PIT
Sep 26 20:19:17 Hilbert kernel: [    0.000000] Detected 2193.996 MHz processor.
Sep 26 20:19:17 Hilbert kernel: [    0.010005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4387.99 BogoMIPS (lpj=21939960)
Sep 26 20:19:17 Hilbert kernel: [    0.010010] pid_max: default: 32768 minimum: 301
Sep 26 20:19:17 Hilbert kernel: [    0.010042] Security Framework initialized
Sep 26 20:19:17 Hilbert kernel: [    0.010062] AppArmor: AppArmor initialized
Sep 26 20:19:17 Hilbert kernel: [    0.010064] Yama: becoming mindful.
Sep 26 20:19:17 Hilbert kernel: [    0.010308] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Sep 26 20:19:17 Hilbert kernel: [    0.011475] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Sep 26 20:19:17 Hilbert kernel: [    0.012026] Mount-cache hash table entries: 256
Sep 26 20:19:17 Hilbert kernel: [    0.012182] Initializing cgroup subsys cpuacct
Sep 26 20:19:17 Hilbert kernel: [    0.012188] Initializing cgroup subsys memory
Sep 26 20:19:17 Hilbert kernel: [    0.012198] Initializing cgroup subsys devices
Sep 26 20:19:17 Hilbert kernel: [    0.012200] Initializing cgroup subsys freezer
Sep 26 20:19:17 Hilbert kernel: [    0.012203] Initializing cgroup subsys net_cls
Sep 26 20:19:17 Hilbert kernel: [    0.012205] Initializing cgroup subsys blkio
Sep 26 20:19:17 Hilbert kernel: [    0.012213] Initializing cgroup subsys perf_event
Sep 26 20:19:17 Hilbert kernel: [    0.012247] CPU: Physical Processor ID: 0
Sep 26 20:19:17 Hilbert kernel: [    0.012249] CPU: Processor Core ID: 0
Sep 26 20:19:17 Hilbert kernel: [    0.012251] mce: CPU supports 6 MCE banks
Sep 26 20:19:17 Hilbert kernel: [    0.012261] CPU0: Thermal monitoring enabled (TM2)
Sep 26 20:19:17 Hilbert kernel: [    0.012266] using mwait in idle threads.
Sep 26 20:19:17 Hilbert kernel: [    0.014793] ACPI: Core revision 20110413
Sep 26 20:19:17 Hilbert kernel: [    0.023299] ftrace: allocating 25651 entries in 101 pages
Sep 26 20:19:17 Hilbert kernel: [    0.030432] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Sep 26 20:19:17 Hilbert kernel: [    0.134238] CPU0: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0b
Sep 26 20:19:17 Hilbert kernel: [    0.140000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
Sep 26 20:19:17 Hilbert kernel: [    0.140000] PEBS disabled due to CPU errata.
Sep 26 20:19:17 Hilbert kernel: [    0.140000] ... version:                2
Sep 26 20:19:17 Hilbert kernel: [    0.140000] ... bit width:              40
Sep 26 20:19:17 Hilbert kernel: [    0.140000] ... generic registers:      2
Sep 26 20:19:17 Hilbert kernel: [    0.140000] ... value mask:             000000ffffffffff
Sep 26 20:19:17 Hilbert kernel: [    0.140000] ... max period:             000000007fffffff
Sep 26 20:19:17 Hilbert kernel: [    0.140000] ... fixed-purpose events:   3
Sep 26 20:19:17 Hilbert kernel: [    0.140000] ... event mask:             0000000700000003
Sep 26 20:19:17 Hilbert kernel: [    0.140000] Booting Node   0, Processors  #1 Ok.
Sep 26 20:19:17 Hilbert kernel: [    0.140000] smpboot cpu 1: start_ip = 9a000
Sep 26 20:19:17 Hilbert kernel: [    0.300019] Brought up 2 CPUs
Sep 26 20:19:17 Hilbert kernel: [    0.300022] Total of 2 processors activated (8775.73 BogoMIPS).
Sep 26 20:19:17 Hilbert kernel: [    0.301277] devtmpfs: initialized
Sep 26 20:19:17 Hilbert kernel: [    0.301425] print_constraints: dummy: 
Sep 26 20:19:17 Hilbert kernel: [    0.301460] Time: 18:19:01  Date: 09/26/11
Sep 26 20:19:17 Hilbert kernel: [    0.301496] NET: Registered protocol family 16
Sep 26 20:19:17 Hilbert kernel: [    0.301526] Trying to unpack rootfs image as initramfs...
Sep 26 20:19:17 Hilbert kernel: [    0.301627] ACPI: bus type pci registered
Sep 26 20:19:17 Hilbert kernel: [    0.301689] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
Sep 26 20:19:17 Hilbert kernel: [    0.301692] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
Sep 26 20:19:17 Hilbert kernel: [    0.310086] PCI: Using configuration type 1 for base access
Sep 26 20:19:17 Hilbert kernel: [    0.310093] dmi type 0xB1 record - unknown flag
Sep 26 20:19:17 Hilbert kernel: [    0.310938] bio: create slab <bio-0> at 0
Sep 26 20:19:17 Hilbert kernel: [    0.312148] ACPI: EC: Look up EC in DSDT
Sep 26 20:19:17 Hilbert kernel: [    0.319522] ACPI: SSDT 000000007fe6e4f2 00286 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
Sep 26 20:19:17 Hilbert kernel: [    0.319791] ACPI: Dynamic OEM Table Load:
Sep 26 20:19:17 Hilbert kernel: [    0.319795] ACPI: SSDT           (null) 00286 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
Sep 26 20:19:17 Hilbert kernel: [    0.319900] ACPI: SSDT 000000007fe6de88 005E5 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
Sep 26 20:19:17 Hilbert kernel: [    0.320182] ACPI: Dynamic OEM Table Load:
Sep 26 20:19:17 Hilbert kernel: [    0.320185] ACPI: SSDT           (null) 005E5 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
Sep 26 20:19:17 Hilbert kernel: [    0.320373] ACPI: SSDT 000000007fe6e778 000C4 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
Sep 26 20:19:17 Hilbert kernel: [    0.320633] ACPI: Dynamic OEM Table Load:
Sep 26 20:19:17 Hilbert kernel: [    0.320637] ACPI: SSDT           (null) 000C4 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
Sep 26 20:19:17 Hilbert kernel: [    0.320707] ACPI: SSDT 000000007fe6e46d 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
Sep 26 20:19:17 Hilbert kernel: [    0.320962] ACPI: Dynamic OEM Table Load:
Sep 26 20:19:17 Hilbert kernel: [    0.320965] ACPI: SSDT           (null) 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
Sep 26 20:19:17 Hilbert kernel: [    0.321128] ACPI: Interpreter enabled
Sep 26 20:19:17 Hilbert kernel: [    0.321131] ACPI: (supports S0 S3 S4 S5)
Sep 26 20:19:17 Hilbert kernel: [    0.321147] ACPI: Using IOAPIC for interrupt routing
Sep 26 20:19:17 Hilbert kernel: [    0.351270] ACPI: No dock devices found.
Sep 26 20:19:17 Hilbert kernel: [    0.351274] HEST: Table not found.
Sep 26 20:19:17 Hilbert kernel: [    0.351277] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
Sep 26 20:19:17 Hilbert kernel: [    0.359886] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Sep 26 20:19:17 Hilbert kernel: [    0.377070] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
Sep 26 20:19:17 Hilbert kernel: [    0.377074] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
Sep 26 20:19:17 Hilbert kernel: [    0.377077] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
Sep 26 20:19:17 Hilbert kernel: [    0.377080] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
Sep 26 20:19:17 Hilbert kernel: [    0.377082] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xf3ffffff] (ignored)
Sep 26 20:19:17 Hilbert kernel: [    0.377085] pci_root PNP0A03:00: host bridge window [mem 0xf8000000-0xfebfffff] (ignored)
Sep 26 20:19:17 Hilbert kernel: [    0.377087] pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff] (ignored)
Sep 26 20:19:17 Hilbert kernel: [    0.377090] pci_root PNP0A03:00: host bridge window [mem 0xfed1c000-0xfed1ffff] (ignored)
Sep 26 20:19:17 Hilbert kernel: [    0.377093] pci_root PNP0A03:00: host bridge window [mem 0xfed90000-0xfed9ffff] (ignored)
Sep 26 20:19:17 Hilbert kernel: [    0.377095] pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff] (ignored)
Sep 26 20:19:17 Hilbert kernel: [    0.377098] pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff] (ignored)
Sep 26 20:19:17 Hilbert kernel: [    0.377100] pci_root PNP0A03:00: host bridge window [mem 0xffb00000-0xffefffff] (ignored)
Sep 26 20:19:17 Hilbert kernel: [    0.377114] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
Sep 26 20:19:17 Hilbert kernel: [    0.377161] pci 0000:00:01.0: [8086:2a01] type 1 class 0x000604
Sep 26 20:19:17 Hilbert kernel: [    0.377198] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
Sep 26 20:19:17 Hilbert kernel: [    0.377202] pci 0000:00:01.0: PME# disabled
Sep 26 20:19:17 Hilbert kernel: [    0.377258] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
Sep 26 20:19:17 Hilbert kernel: [    0.377317] pci 0000:00:1a.0: reg 20: [io  0x6f20-0x6f3f]
Sep 26 20:19:17 Hilbert kernel: [    0.377359] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
Sep 26 20:19:17 Hilbert kernel: [    0.377418] pci 0000:00:1a.1: reg 20: [io  0x6f00-0x6f1f]
Sep 26 20:19:17 Hilbert kernel: [    0.377475] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
Sep 26 20:19:17 Hilbert kernel: [    0.377501] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff]
Sep 26 20:19:17 Hilbert kernel: [    0.377595] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
Sep 26 20:19:17 Hilbert kernel: [    0.377601] pci 0000:00:1a.7: PME# disabled
Sep 26 20:19:17 Hilbert kernel: [    0.377631] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
Sep 26 20:19:17 Hilbert kernel: [    0.377654] pci 0000:00:1b.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit]
Sep 26 20:19:17 Hilbert kernel: [    0.377741] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Sep 26 20:19:17 Hilbert kernel: [    0.377746] pci 0000:00:1b.0: PME# disabled
Sep 26 20:19:17 Hilbert kernel: [    0.377776] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
Sep 26 20:19:17 Hilbert kernel: [    0.377866] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Sep 26 20:19:17 Hilbert kernel: [    0.377871] pci 0000:00:1c.0: PME# disabled
Sep 26 20:19:17 Hilbert kernel: [    0.377907] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
Sep 26 20:19:17 Hilbert kernel: [    0.377997] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Sep 26 20:19:17 Hilbert kernel: [    0.378002] pci 0000:00:1c.1: PME# disabled
Sep 26 20:19:17 Hilbert kernel: [    0.378037] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604
Sep 26 20:19:17 Hilbert kernel: [    0.378126] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
Sep 26 20:19:17 Hilbert kernel: [    0.378131] pci 0000:00:1c.3: PME# disabled
Sep 26 20:19:17 Hilbert kernel: [    0.378165] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
Sep 26 20:19:17 Hilbert kernel: [    0.378224] pci 0000:00:1d.0: reg 20: [io  0x6f80-0x6f9f]
Sep 26 20:19:17 Hilbert kernel: [    0.378267] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
Sep 26 20:19:17 Hilbert kernel: [    0.378326] pci 0000:00:1d.1: reg 20: [io  0x6f60-0x6f7f]
Sep 26 20:19:17 Hilbert kernel: [    0.378367] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
Sep 26 20:19:17 Hilbert kernel: [    0.378426] pci 0000:00:1d.2: reg 20: [io  0x6f40-0x6f5f]
Sep 26 20:19:17 Hilbert kernel: [    0.378482] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
Sep 26 20:19:17 Hilbert kernel: [    0.378507] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff]
Sep 26 20:19:17 Hilbert kernel: [    0.378602] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Sep 26 20:19:17 Hilbert kernel: [    0.378608] pci 0000:00:1d.7: PME# disabled
Sep 26 20:19:17 Hilbert kernel: [    0.378632] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
Sep 26 20:19:17 Hilbert kernel: [    0.378721] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
Sep 26 20:19:17 Hilbert kernel: [    0.378841] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
Sep 26 20:19:17 Hilbert kernel: [    0.378848] pci 0000:00:1f.0: quirk: [io  0x1080-0x10bf] claimed by ICH6 GPIO
Sep 26 20:19:17 Hilbert kernel: [    0.378853] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
Sep 26 20:19:17 Hilbert kernel: [    0.378859] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
Sep 26 20:19:17 Hilbert kernel: [    0.378906] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
Sep 26 20:19:17 Hilbert kernel: [    0.378924] pci 0000:00:1f.1: reg 10: [io  0x01f0-0x01f7]
Sep 26 20:19:17 Hilbert kernel: [    0.378936] pci 0000:00:1f.1: reg 14: [io  0x03f4-0x03f7]
Sep 26 20:19:17 Hilbert kernel: [    0.378949] pci 0000:00:1f.1: reg 18: [io  0x0170-0x0177]
Sep 26 20:19:17 Hilbert kernel: [    0.378962] pci 0000:00:1f.1: reg 1c: [io  0x0374-0x0377]
Sep 26 20:19:17 Hilbert kernel: [    0.378976] pci 0000:00:1f.1: reg 20: [io  0x6fa0-0x6faf]
Sep 26 20:19:17 Hilbert kernel: [    0.379029] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
Sep 26 20:19:17 Hilbert kernel: [    0.379057] pci 0000:00:1f.2: reg 10: [io  0x6eb0-0x6eb7]
Sep 26 20:19:17 Hilbert kernel: [    0.379070] pci 0000:00:1f.2: reg 14: [io  0x6eb8-0x6ebb]
Sep 26 20:19:17 Hilbert kernel: [    0.379083] pci 0000:00:1f.2: reg 18: [io  0x6ec0-0x6ec7]
Sep 26 20:19:17 Hilbert kernel: [    0.379095] pci 0000:00:1f.2: reg 1c: [io  0x6ec8-0x6ecb]
Sep 26 20:19:17 Hilbert kernel: [    0.379108] pci 0000:00:1f.2: reg 20: [io  0x6ee0-0x6eff]
Sep 26 20:19:17 Hilbert kernel: [    0.379121] pci 0000:00:1f.2: reg 24: [mem 0xfebfb800-0xfebfbfff]
Sep 26 20:19:17 Hilbert kernel: [    0.379170] pci 0000:00:1f.2: PME# supported from D3hot
Sep 26 20:19:17 Hilbert kernel: [    0.379175] pci 0000:00:1f.2: PME# disabled
Sep 26 20:19:17 Hilbert kernel: [    0.379198] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
Sep 26 20:19:17 Hilbert kernel: [    0.379215] pci 0000:00:1f.3: reg 10: [mem 0xfebfb700-0xfebfb7ff]
Sep 26 20:19:17 Hilbert kernel: [    0.379260] pci 0000:00:1f.3: reg 20: [io  0x10c0-0x10df]
Sep 26 20:19:17 Hilbert kernel: [    0.379349] pci 0000:01:00.0: [10de:0407] type 0 class 0x000300
Sep 26 20:19:17 Hilbert kernel: [    0.379369] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
Sep 26 20:19:17 Hilbert kernel: [    0.379391] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
Sep 26 20:19:17 Hilbert kernel: [    0.379412] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
Sep 26 20:19:17 Hilbert kernel: [    0.379427] pci 0000:01:00.0: reg 24: [io  0xef00-0xef7f]
Sep 26 20:19:17 Hilbert kernel: [    0.379442] pci 0000:01:00.0: reg 30: [mem 0xfea00000-0xfea1ffff pref]
Sep 26 20:19:17 Hilbert kernel: [    0.379527] pci 0000:00:01.0: PCI bridge to [bus 01-01]
Sep 26 20:19:17 Hilbert kernel: [    0.379530] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
Sep 26 20:19:17 Hilbert kernel: [    0.379534] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfeafffff]
Sep 26 20:19:17 Hilbert kernel: [    0.379539] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
Sep 26 20:19:17 Hilbert kernel: [    0.379601] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
Sep 26 20:19:17 Hilbert kernel: [    0.379606] pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
Sep 26 20:19:17 Hilbert kernel: [    0.379613] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
Sep 26 20:19:17 Hilbert kernel: [    0.379622] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
Sep 26 20:19:17 Hilbert kernel: [    0.379785] pci 0000:0c:00.0: [8086:4222] type 0 class 0x000280
Sep 26 20:19:17 Hilbert kernel: [    0.379842] pci 0000:0c:00.0: reg 10: [mem 0xf9fff000-0xf9ffffff]
Sep 26 20:19:17 Hilbert kernel: [    0.380326] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
Sep 26 20:19:17 Hilbert kernel: [    0.380339] pci 0000:0c:00.0: PME# disabled
Sep 26 20:19:17 Hilbert kernel: [    0.380410] pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
Sep 26 20:19:17 Hilbert kernel: [    0.380438] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
Sep 26 20:19:17 Hilbert kernel: [    0.380443] pci 0000:00:1c.1:   bridge window [io  0xf000-0x0000] (disabled)
Sep 26 20:19:17 Hilbert kernel: [    0.380449] pci 0000:00:1c.1:   bridge window [mem 0xf9f00000-0xf9ffffff]
Sep 26 20:19:17 Hilbert kernel: [    0.380457] pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
Sep 26 20:19:17 Hilbert kernel: [    0.380521] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
Sep 26 20:19:17 Hilbert kernel: [    0.380526] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
Sep 26 20:19:17 Hilbert kernel: [    0.380531] pci 0000:00:1c.3:   bridge window [mem 0xf9c00000-0xf9efffff]
Sep 26 20:19:17 Hilbert kernel: [    0.380540] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
Sep 26 20:19:17 Hilbert kernel: [    0.380587] pci 0000:03:00.0: [14e4:170c] type 0 class 0x000200
Sep 26 20:19:17 Hilbert kernel: [    0.380609] pci 0000:03:00.0: reg 10: [mem 0xf9bfe000-0xf9bfffff]
Sep 26 20:19:17 Hilbert kernel: [    0.380697] pci 0000:03:00.0: supports D1 D2
Sep 26 20:19:17 Hilbert kernel: [    0.380699] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Sep 26 20:19:17 Hilbert kernel: [    0.380704] pci 0000:03:00.0: PME# disabled
Sep 26 20:19:17 Hilbert kernel: [    0.380726] pci 0000:03:01.0: [1180:0832] type 0 class 0x000c00
Sep 26 20:19:17 Hilbert kernel: [    0.380743] pci 0000:03:01.0: proprietary Ricoh MMC controller disabled (via firewire function)
Sep 26 20:19:17 Hilbert kernel: [    0.380745] pci 0000:03:01.0: MMC cards are now supported by standard SDHCI controller
Sep 26 20:19:17 Hilbert kernel: [    0.380762] pci 0000:03:01.0: reg 10: [mem 0xf9bfd800-0xf9bfdfff]
Sep 26 20:19:17 Hilbert kernel: [    0.380851] pci 0000:03:01.0: supports D1 D2
Sep 26 20:19:17 Hilbert kernel: [    0.380853] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
Sep 26 20:19:17 Hilbert kernel: [    0.380858] pci 0000:03:01.0: PME# disabled
Sep 26 20:19:17 Hilbert kernel: [    0.380882] pci 0000:03:01.1: [1180:0822] type 0 class 0x000805
Sep 26 20:19:17 Hilbert kernel: [    0.380905] pci 0000:03:01.1: reg 10: [mem 0xf9bfd400-0xf9bfd4ff]
Sep 26 20:19:17 Hilbert kernel: [    0.380995] pci 0000:03:01.1: supports D1 D2
Sep 26 20:19:17 Hilbert kernel: [    0.380997] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
Sep 26 20:19:17 Hilbert kernel: [    0.381002] pci 0000:03:01.1: PME# disabled
Sep 26 20:19:17 Hilbert kernel: [    0.381027] pci 0000:03:01.2: [1180:0592] type 0 class 0x000880
Sep 26 20:19:17 Hilbert kernel: [    0.381050] pci 0000:03:01.2: reg 10: [mem 0xf9bfd600-0xf9bfd6ff]
Sep 26 20:19:17 Hilbert kernel: [    0.381142] pci 0000:03:01.2: supports D1 D2
Sep 26 20:19:17 Hilbert kernel: [    0.381144] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
Sep 26 20:19:17 Hilbert kernel: [    0.381149] pci 0000:03:01.2: PME# disabled
Sep 26 20:19:17 Hilbert kernel: [    0.381173] pci 0000:03:01.3: [1180:0852] type 0 class 0x000880
Sep 26 20:19:17 Hilbert kernel: [    0.381196] pci 0000:03:01.3: reg 10: [mem 0xf9bfd700-0xf9bfd7ff]
Sep 26 20:19:17 Hilbert kernel: [    0.381287] pci 0000:03:01.3: supports D1 D2
Sep 26 20:19:17 Hilbert kernel: [    0.381289] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
Sep 26 20:19:17 Hilbert kernel: [    0.381294] pci 0000:03:01.3: PME# disabled
Sep 26 20:19:17 Hilbert kernel: [    0.381368] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
Sep 26 20:19:17 Hilbert kernel: [    0.381374] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
Sep 26 20:19:17 Hilbert kernel: [    0.381379] pci 0000:00:1e.0:   bridge window [mem 0xf9b00000-0xf9bfffff]
Sep 26 20:19:17 Hilbert kernel: [    0.381388] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
Sep 26 20:19:17 Hilbert kernel: [    0.381391] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
Sep 26 20:19:17 Hilbert kernel: [    0.381394] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
Sep 26 20:19:17 Hilbert kernel: [    0.381428] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Sep 26 20:19:17 Hilbert kernel: [    0.381621] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
Sep 26 20:19:17 Hilbert kernel: [    0.381710] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
Sep 26 20:19:17 Hilbert kernel: [    0.381747] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
Sep 26 20:19:17 Hilbert kernel: [    0.381788] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
Sep 26 20:19:17 Hilbert kernel: [    0.381829] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
Sep 26 20:19:17 Hilbert kernel: [    0.381872]  pci0000:00: Requesting ACPI _OSC control (0x1d)
Sep 26 20:19:17 Hilbert kernel: [    0.381876]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
Sep 26 20:19:17 Hilbert kernel: [    0.381878] ACPI _OSC control for PCIe not granted, disabling ASPM
Sep 26 20:19:17 Hilbert kernel: [    0.389511] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *7
Sep 26 20:19:17 Hilbert kernel: [    0.389577] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
Sep 26 20:19:17 Hilbert kernel: [    0.389639] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4
Sep 26 20:19:17 Hilbert kernel: [    0.389705] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
Sep 26 20:19:17 Hilbert kernel: [    0.389766] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Sep 26 20:19:17 Hilbert kernel: [    0.389830] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Sep 26 20:19:17 Hilbert kernel: [    0.389894] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Sep 26 20:19:17 Hilbert kernel: [    0.389949] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Sep 26 20:19:17 Hilbert kernel: [    0.390122] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Sep 26 20:19:17 Hilbert kernel: [    0.390128] vgaarb: loaded
Sep 26 20:19:17 Hilbert kernel: [    0.390129] vgaarb: bridge control possible 0000:01:00.0
Sep 26 20:19:17 Hilbert kernel: [    0.390335] SCSI subsystem initialized
Sep 26 20:19:17 Hilbert kernel: [    0.390410] libata version 3.00 loaded.
Sep 26 20:19:17 Hilbert kernel: [    0.390458] usbcore: registered new interface driver usbfs
Sep 26 20:19:17 Hilbert kernel: [    0.390468] usbcore: registered new interface driver hub
Sep 26 20:19:17 Hilbert kernel: [    0.390497] usbcore: registered new device driver usb
Sep 26 20:19:17 Hilbert kernel: [    0.390584] PCI: Using ACPI for IRQ routing
Sep 26 20:19:17 Hilbert kernel: [    0.393229] PCI: pci_cache_line_size set to 64 bytes
Sep 26 20:19:17 Hilbert kernel: [    0.393356] reserve RAM buffer: 000000000009f000 - 000000000009ffff 
Sep 26 20:19:17 Hilbert kernel: [    0.393358] reserve RAM buffer: 000000007fe6d800 - 000000007fffffff 
Sep 26 20:19:17 Hilbert kernel: [    0.393462] NetLabel: Initializing
Sep 26 20:19:17 Hilbert kernel: [    0.393464] NetLabel:  domain hash size = 128
Sep 26 20:19:17 Hilbert kernel: [    0.393466] NetLabel:  protocols = UNLABELED CIPSOv4
Sep 26 20:19:17 Hilbert kernel: [    0.393478] NetLabel:  unlabeled traffic allowed by default
Sep 26 20:19:17 Hilbert kernel: [    0.393518] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Sep 26 20:19:17 Hilbert kernel: [    0.393525] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Sep 26 20:19:17 Hilbert kernel: [    0.393529] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Sep 26 20:19:17 Hilbert kernel: [    0.400143] Switching to clocksource hpet
Sep 26 20:19:17 Hilbert kernel: [    0.407515] AppArmor: AppArmor Filesystem Enabled
Sep 26 20:19:17 Hilbert kernel: [    0.407556] pnp: PnP ACPI init
Sep 26 20:19:17 Hilbert kernel: [    0.407582] ACPI: bus type pnp registered
Sep 26 20:19:17 Hilbert kernel: [    0.409479] Switched to NOHz mode on CPU #0
Sep 26 20:19:17 Hilbert kernel: [    0.409709] Switched to NOHz mode on CPU #1
Sep 26 20:19:17 Hilbert kernel: [    0.416038] pnp 00:00: [bus 00-ff]
Sep 26 20:19:17 Hilbert kernel: [    0.416042] pnp 00:00: [io  0x0000-0x0cf7 window]
Sep 26 20:19:17 Hilbert kernel: [    0.416044] pnp 00:00: [io  0x0cf8-0x0cff]
Sep 26 20:19:17 Hilbert kernel: [    0.416046] pnp 00:00: [io  0x0d00-0xffff window]
Sep 26 20:19:17 Hilbert kernel: [    0.416049] pnp 00:00: [mem 0x000a0000-0x000bffff window]
Sep 26 20:19:17 Hilbert kernel: [    0.416051] pnp 00:00: [mem 0x000d0000-0x000dffff window]
Sep 26 20:19:17 Hilbert kernel: [    0.416054] pnp 00:00: [mem 0x80000000-0xf3ffffff window]
Sep 26 20:19:17 Hilbert kernel: [    0.416056] pnp 00:00: [mem 0xf8000000-0xfebfffff window]
Sep 26 20:19:17 Hilbert kernel: [    0.416058] pnp 00:00: [mem 0xfec10000-0xfecfffff window]
Sep 26 20:19:17 Hilbert kernel: [    0.416060] pnp 00:00: [mem 0xfed1c000-0xfed1ffff window]
Sep 26 20:19:17 Hilbert kernel: [    0.416063] pnp 00:00: [mem 0xfed90000-0xfed9ffff window]
Sep 26 20:19:17 Hilbert kernel: [    0.416065] pnp 00:00: [mem 0xfeda7000-0xfedfffff window]
Sep 26 20:19:17 Hilbert kernel: [    0.416067] pnp 00:00: [mem 0xfee10000-0xff9fffff window]
Sep 26 20:19:17 Hilbert kernel: [    0.416073] pnp 00:00: [mem 0xffb00000-0xffefffff window]
Sep 26 20:19:17 Hilbert kernel: [    0.416162] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
Sep 26 20:19:17 Hilbert kernel: [    0.416196] pnp 00:01: [irq 12]
Sep 26 20:19:17 Hilbert kernel: [    0.416218] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active)
Sep 26 20:19:17 Hilbert kernel: [    0.416233] pnp 00:02: [io  0x0060]
Sep 26 20:19:17 Hilbert kernel: [    0.416236] pnp 00:02: [io  0x0064]
Sep 26 20:19:17 Hilbert kernel: [    0.416238] pnp 00:02: [io  0x0062]
Sep 26 20:19:17 Hilbert kernel: [    0.416239] pnp 00:02: [io  0x0066]
Sep 26 20:19:17 Hilbert kernel: [    0.416245] pnp 00:02: [irq 1]
Sep 26 20:19:17 Hilbert kernel: [    0.416270] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
Sep 26 20:19:17 Hilbert kernel: [    0.416285] pnp 00:03: [io  0x0070-0x0071]
Sep 26 20:19:17 Hilbert kernel: [    0.416291] pnp 00:03: [irq 8]
Sep 26 20:19:17 Hilbert kernel: [    0.416293] pnp 00:03: [io  0x0072-0x0077]
Sep 26 20:19:17 Hilbert kernel: [    0.416313] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
Sep 26 20:19:17 Hilbert kernel: [    0.416329] pnp 00:04: [io  0x0061]
Sep 26 20:19:17 Hilbert kernel: [    0.416331] pnp 00:04: [io  0x0063]
Sep 26 20:19:17 Hilbert kernel: [    0.416333] pnp 00:04: [io  0x0065]
Sep 26 20:19:17 Hilbert kernel: [    0.416335] pnp 00:04: [io  0x0067]
Sep 26 20:19:17 Hilbert kernel: [    0.416357] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
Sep 26 20:19:17 Hilbert kernel: [    0.416370] pnp 00:05: [io  0x0c80-0x0cff]
Sep 26 20:19:17 Hilbert kernel: [    0.416439] system 00:05: [io  0x0c80-0x0cff] could not be reserved
Sep 26 20:19:17 Hilbert kernel: [    0.416443] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
Sep 26 20:19:17 Hilbert kernel: [    0.416460] pnp 00:06: [dma 4]
Sep 26 20:19:17 Hilbert kernel: [    0.416462] pnp 00:06: [io  0x0000-0x000f]
Sep 26 20:19:17 Hilbert kernel: [    0.416464] pnp 00:06: [io  0x0080-0x0085]
Sep 26 20:19:17 Hilbert kernel: [    0.416466] pnp 00:06: [io  0x0087-0x008f]
Sep 26 20:19:17 Hilbert kernel: [    0.416468] pnp 00:06: [io  0x00c0-0x00df]
Sep 26 20:19:17 Hilbert kernel: [    0.416470] pnp 00:06: [io  0x0010-0x001f]
Sep 26 20:19:17 Hilbert kernel: [    0.416472] pnp 00:06: [io  0x0090-0x0091]
Sep 26 20:19:17 Hilbert kernel: [    0.416474] pnp 00:06: [io  0x0093-0x009f]
Sep 26 20:19:17 Hilbert kernel: [    0.416496] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
Sep 26 20:19:17 Hilbert kernel: [    0.416510] pnp 00:07: [io  0x00f0-0x00ff]
Sep 26 20:19:17 Hilbert kernel: [    0.416516] pnp 00:07: [irq 13]
Sep 26 20:19:17 Hilbert kernel: [    0.416541] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
Sep 26 20:19:17 Hilbert kernel: [    0.416577] pnp 00:08: [mem 0xfed00000-0xfed003ff]
Sep 26 20:19:17 Hilbert kernel: [    0.416628] system 00:08: [mem 0xfed00000-0xfed003ff] has been reserved
Sep 26 20:19:17 Hilbert kernel: [    0.416632] system 00:08: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
Sep 26 20:19:17 Hilbert kernel: [    0.416755] pnp 00:09: [io  0x0900-0x097f]
Sep 26 20:19:17 Hilbert kernel: [    0.416757] pnp 00:09: [io  0x0092]
Sep 26 20:19:17 Hilbert kernel: [    0.416759] pnp 00:09: [io  0x00b2-0x00b3]
Sep 26 20:19:17 Hilbert kernel: [    0.416761] pnp 00:09: [io  0x0020-0x0021]
Sep 26 20:19:17 Hilbert kernel: [    0.416763] pnp 00:09: [io  0x00a0-0x00a1]
Sep 26 20:19:17 Hilbert kernel: [    0.416765] pnp 00:09: [irq 0 disabled]
Sep 26 20:19:17 Hilbert kernel: [    0.416767] pnp 00:09: [io  0x04d0-0x04d1]
Sep 26 20:19:17 Hilbert kernel: [    0.416769] pnp 00:09: [io  0x1000-0x1005]
Sep 26 20:19:17 Hilbert kernel: [    0.416771] pnp 00:09: [io  0x1008-0x100f]
Sep 26 20:19:17 Hilbert kernel: [    0.416785] pnp 00:09: disabling [io  0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
Sep 26 20:19:17 Hilbert kernel: [    0.416788] pnp 00:09: disabling [io  0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
Sep 26 20:19:17 Hilbert kernel: [    0.416839] system 00:09: [io  0x0900-0x097f] has been reserved
Sep 26 20:19:17 Hilbert kernel: [    0.416842] system 00:09: [io  0x04d0-0x04d1] has been reserved
Sep 26 20:19:17 Hilbert kernel: [    0.416845] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
Sep 26 20:19:17 Hilbert kernel: [    0.416861] pnp 00:0a: [io  0xf400-0xf4fe]
Sep 26 20:19:17 Hilbert kernel: [    0.416863] pnp 00:0a: [io  0x0086]
Sep 26 20:19:17 Hilbert kernel: [    0.416865] pnp 00:0a: [io  0x1006-0x1007]
Sep 26 20:19:17 Hilbert kernel: [    0.416867] pnp 00:0a: [io  0x100a-0x1059]
Sep 26 20:19:17 Hilbert kernel: [    0.416869] pnp 00:0a: [io  0x1060-0x107f]
Sep 26 20:19:17 Hilbert kernel: [    0.416871] pnp 00:0a: [io  0x1080-0x10bf]
Sep 26 20:19:17 Hilbert kernel: [    0.416872] pnp 00:0a: [io  0x10c0-0x10df]
Sep 26 20:19:17 Hilbert kernel: [    0.416877] pnp 00:0a: [io  0x1010-0x102f]
Sep 26 20:19:17 Hilbert kernel: [    0.416879] pnp 00:0a: [io  0x0809]
Sep 26 20:19:17 Hilbert kernel: [    0.416892] pnp 00:0a: disabling [io  0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
Sep 26 20:19:17 Hilbert kernel: [    0.416896] pnp 00:0a: disabling [io  0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
Sep 26 20:19:17 Hilbert kernel: [    0.416899] pnp 00:0a: disabling [io  0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
Sep 26 20:19:17 Hilbert kernel: [    0.416902] pnp 00:0a: disabling [io  0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
Sep 26 20:19:17 Hilbert kernel: [    0.416959] system 00:0a: [io  0xf400-0xf4fe] has been reserved
Sep 26 20:19:17 Hilbert kernel: [    0.416963] system 00:0a: [io  0x1080-0x10bf] has been reserved
Sep 26 20:19:17 Hilbert kernel: [    0.416965] system 00:0a: [io  0x10c0-0x10df] has been reserved
Sep 26 20:19:17 Hilbert kernel: [    0.416968] system 00:0a: [io  0x0809] has been reserved
Sep 26 20:19:17 Hilbert kernel: [    0.416971] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
Sep 26 20:19:17 Hilbert kernel: [    0.426549] pnp 00:0b: [mem 0x00000000-0x0009efff]
Sep 26 20:19:17 Hilbert kernel: [    0.426552] pnp 00:0b: [mem 0x0009f000-0x0009ffff]
Sep 26 20:19:17 Hilbert kernel: [    0.426555] pnp 00:0b: [mem 0x000c0000-0x000cffff]
Sep 26 20:19:17 Hilbert kernel: [    0.426557] pnp 00:0b: [mem 0x000e0000-0x000fffff]
Sep 26 20:19:17 Hilbert kernel: [    0.426559] pnp 00:0b: [mem 0x00100000-0x7fe6d7ff]
Sep 26 20:19:17 Hilbert kernel: [    0.426561] pnp 00:0b: [mem 0x7fe6d800-0x7fefffff]
Sep 26 20:19:17 Hilbert kernel: [    0.426563] pnp 00:0b: [mem 0x7ff00000-0x7fffffff]
Sep 26 20:19:17 Hilbert kernel: [    0.426565] pnp 00:0b: [mem 0x7ff00000-0x806fffff]
Sep 26 20:19:17 Hilbert kernel: [    0.426567] pnp 00:0b: [mem 0xfff00000-0xffffffff]
Sep 26 20:19:17 Hilbert kernel: [    0.426569] pnp 00:0b: [mem 0xffa00000-0xffafffff]
Sep 26 20:19:17 Hilbert kernel: [    0.426571] pnp 00:0b: [mem 0xfec00000-0xfec0ffff]
Sep 26 20:19:17 Hilbert kernel: [    0.426573] pnp 00:0b: [mem 0xfee00000-0xfee0ffff]
Sep 26 20:19:17 Hilbert kernel: [    0.426575] pnp 00:0b: [mem 0xfed20000-0xfed8ffff]
Sep 26 20:19:17 Hilbert kernel: [    0.426577] pnp 00:0b: [mem 0xfeda0000-0xfeda3fff]
Sep 26 20:19:17 Hilbert kernel: [    0.426579] pnp 00:0b: [mem 0xfeda4000-0xfeda4fff]
Sep 26 20:19:17 Hilbert kernel: [    0.426581] pnp 00:0b: [mem 0xfeda5000-0xfeda5fff]
Sep 26 20:19:17 Hilbert kernel: [    0.426583] pnp 00:0b: [mem 0xfeda6000-0xfeda6fff]
Sep 26 20:19:17 Hilbert kernel: [    0.426585] pnp 00:0b: [mem 0xfed18000-0xfed1bfff]
Sep 26 20:19:17 Hilbert kernel: [    0.426587] pnp 00:0b: [mem 0xf4000000-0xf7ffffff]
Sep 26 20:19:17 Hilbert kernel: [    0.426696] system 00:0b: [mem 0x00000000-0x0009efff] could not be reserved
Sep 26 20:19:17 Hilbert kernel: [    0.426699] system 00:0b: [mem 0x0009f000-0x0009ffff] could not be reserved
Sep 26 20:19:17 Hilbert kernel: [    0.426702] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
Sep 26 20:19:17 Hilbert kernel: [    0.426705] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
Sep 26 20:19:17 Hilbert kernel: [    0.426708] system 00:0b: [mem 0x00100000-0x7fe6d7ff] could not be reserved
Sep 26 20:19:17 Hilbert kernel: [    0.426711] system 00:0b: [mem 0x7fe6d800-0x7fefffff] has been reserved
Sep 26 20:19:17 Hilbert kernel: [    0.426713] system 00:0b: [mem 0x7ff00000-0x7fffffff] has been reserved
Sep 26 20:19:17 Hilbert kernel: [    0.426716] system 00:0b: [mem 0x7ff00000-0x806fffff] could not be reserved
Sep 26 20:19:17 Hilbert kernel: [    0.426719] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
Sep 26 20:19:17 Hilbert kernel: [    0.426722] system 00:0b: [mem 0xffa00000-0xffafffff] has been reserved
Sep 26 20:19:17 Hilbert kernel: [    0.426725] system 00:0b: [mem 0xfec00000-0xfec0ffff] could not be reserved
Sep 26 20:19:17 Hilbert kernel: [    0.426727] system 00:0b: [mem 0xfee00000-0xfee0ffff] has been reserved
Sep 26 20:19:17 Hilbert kernel: [    0.426730] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
Sep 26 20:19:17 Hilbert kernel: [    0.426733] system 00:0b: [mem 0xfeda0000-0xfeda3fff] has been reserved
Sep 26 20:19:17 Hilbert kernel: [    0.426736] system 00:0b: [mem 0xfeda4000-0xfeda4fff] has been reserved
Sep 26 20:19:17 Hilbert kernel: [    0.426738] system 00:0b: [mem 0xfeda5000-0xfeda5fff] has been reserved
Sep 26 20:19:17 Hilbert kernel: [    0.426741] system 00:0b: [mem 0xfeda6000-0xfeda6fff] has been reserved
Sep 26 20:19:17 Hilbert kernel: [    0.426744] system 00:0b: [mem 0xfed18000-0xfed1bfff] has been reserved
Sep 26 20:19:17 Hilbert kernel: [    0.426747] system 00:0b: [mem 0xf4000000-0xf7ffffff] has been reserved
Sep 26 20:19:17 Hilbert kernel: [    0.426750] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
Sep 26 20:19:17 Hilbert kernel: [    0.426804] pnp: PnP ACPI: found 12 devices
Sep 26 20:19:17 Hilbert kernel: [    0.426806] ACPI: ACPI bus type pnp unregistered
Sep 26 20:19:17 Hilbert kernel: [    0.432887] PCI: max bus depth: 1 pci_try_num: 2
Sep 26 20:19:17 Hilbert kernel: [    0.432950] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
Sep 26 20:19:17 Hilbert kernel: [    0.432954] pci 0000:00:1c.1: BAR 13: assigned [io  0x2000-0x2fff]
Sep 26 20:19:17 Hilbert kernel: [    0.432958] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80200000-0x803fffff]
Sep 26 20:19:17 Hilbert kernel: [    0.432961] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
Sep 26 20:19:17 Hilbert kernel: [    0.432965] pci 0000:00:1c.0: BAR 13: assigned [io  0x3000-0x3fff]
Sep 26 20:19:17 Hilbert kernel: [    0.432968] pci 0000:00:01.0: PCI bridge to [bus 01-01]
Sep 26 20:19:17 Hilbert kernel: [    0.432971] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
Sep 26 20:19:17 Hilbert kernel: [    0.432975] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfeafffff]
Sep 26 20:19:17 Hilbert kernel: [    0.432978] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
Sep 26 20:19:17 Hilbert kernel: [    0.432983] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
Sep 26 20:19:17 Hilbert kernel: [    0.432987] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
Sep 26 20:19:17 Hilbert kernel: [    0.432993] pci 0000:00:1c.0:   bridge window [mem 0x80200000-0x803fffff]
Sep 26 20:19:17 Hilbert kernel: [    0.432999] pci 0000:00:1c.0:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
Sep 26 20:19:17 Hilbert kernel: [    0.433007] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
Sep 26 20:19:17 Hilbert kernel: [    0.433010] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
Sep 26 20:19:17 Hilbert kernel: [    0.433017] pci 0000:00:1c.1:   bridge window [mem 0xf9f00000-0xf9ffffff]
Sep 26 20:19:17 Hilbert kernel: [    0.433022] pci 0000:00:1c.1:   bridge window [mem 0x80000000-0x801fffff 64bit pref]
Sep 26 20:19:17 Hilbert kernel: [    0.433030] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
Sep 26 20:19:17 Hilbert kernel: [    0.433034] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
Sep 26 20:19:17 Hilbert kernel: [    0.433040] pci 0000:00:1c.3:   bridge window [mem 0xf9c00000-0xf9efffff]
Sep 26 20:19:17 Hilbert kernel: [    0.433046] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
Sep 26 20:19:17 Hilbert kernel: [    0.433054] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
Sep 26 20:19:17 Hilbert kernel: [    0.433056] pci 0000:00:1e.0:   bridge window [io  disabled]
Sep 26 20:19:17 Hilbert kernel: [    0.433063] pci 0000:00:1e.0:   bridge window [mem 0xf9b00000-0xf9bfffff]
Sep 26 20:19:17 Hilbert kernel: [    0.433068] pci 0000:00:1e.0:   bridge window [mem pref disabled]
Sep 26 20:19:17 Hilbert kernel: [    0.433095] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep 26 20:19:17 Hilbert kernel: [    0.433100] pci 0000:00:01.0: setting latency timer to 64
Sep 26 20:19:17 Hilbert kernel: [    0.433108] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep 26 20:19:17 Hilbert kernel: [    0.433114] pci 0000:00:1c.0: setting latency timer to 64
Sep 26 20:19:17 Hilbert kernel: [    0.433125] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep 26 20:19:17 Hilbert kernel: [    0.433130] pci 0000:00:1c.1: setting latency timer to 64
Sep 26 20:19:17 Hilbert kernel: [    0.433141] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Sep 26 20:19:17 Hilbert kernel: [    0.433146] pci 0000:00:1c.3: setting latency timer to 64
Sep 26 20:19:17 Hilbert kernel: [    0.433155] pci 0000:00:1e.0: setting latency timer to 64
Sep 26 20:19:17 Hilbert kernel: [    0.433159] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
Sep 26 20:19:17 Hilbert kernel: [    0.433162] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
Sep 26 20:19:17 Hilbert kernel: [    0.433164] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
Sep 26 20:19:17 Hilbert kernel: [    0.433166] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfeafffff]
Sep 26 20:19:17 Hilbert kernel: [    0.433169] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
Sep 26 20:19:17 Hilbert kernel: [    0.433171] pci_bus 0000:0b: resource 0 [io  0x3000-0x3fff]
Sep 26 20:19:17 Hilbert kernel: [    0.433173] pci_bus 0000:0b: resource 1 [mem 0x80200000-0x803fffff]
Sep 26 20:19:17 Hilbert kernel: [    0.433176] pci_bus 0000:0b: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
Sep 26 20:19:17 Hilbert kernel: [    0.433178] pci_bus 0000:0c: resource 0 [io  0x2000-0x2fff]
Sep 26 20:19:17 Hilbert kernel: [    0.433181] pci_bus 0000:0c: resource 1 [mem 0xf9f00000-0xf9ffffff]
Sep 26 20:19:17 Hilbert kernel: [    0.433183] pci_bus 0000:0c: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
Sep 26 20:19:17 Hilbert kernel: [    0.433185] pci_bus 0000:0d: resource 0 [io  0xd000-0xdfff]
Sep 26 20:19:17 Hilbert kernel: [    0.433188] pci_bus 0000:0d: resource 1 [mem 0xf9c00000-0xf9efffff]
Sep 26 20:19:17 Hilbert kernel: [    0.433190] pci_bus 0000:0d: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
Sep 26 20:19:17 Hilbert kernel: [    0.433193] pci_bus 0000:03: resource 1 [mem 0xf9b00000-0xf9bfffff]
Sep 26 20:19:17 Hilbert kernel: [    0.433195] pci_bus 0000:03: resource 4 [io  0x0000-0xffff]
Sep 26 20:19:17 Hilbert kernel: [    0.433197] pci_bus 0000:03: resource 5 [mem 0x00000000-0xfffffffff]
Sep 26 20:19:17 Hilbert kernel: [    0.433239] NET: Registered protocol family 2
Sep 26 20:19:17 Hilbert kernel: [    0.433356] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
Sep 26 20:19:17 Hilbert kernel: [    0.434075] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
Sep 26 20:19:17 Hilbert kernel: [    0.436240] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Sep 26 20:19:17 Hilbert kernel: [    0.436837] TCP: Hash tables configured (established 262144 bind 65536)
Sep 26 20:19:17 Hilbert kernel: [    0.436840] TCP reno registered
Sep 26 20:19:17 Hilbert kernel: [    0.436848] UDP hash table entries: 1024 (order: 3, 32768 bytes)
Sep 26 20:19:17 Hilbert kernel: [    0.436869] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
Sep 26 20:19:17 Hilbert kernel: [    0.437021] NET: Registered protocol family 1
Sep 26 20:19:17 Hilbert kernel: [    0.437233] pci 0000:01:00.0: Boot video device
Sep 26 20:19:17 Hilbert kernel: [    0.437257] PCI: CLS 64 bytes, default 64
Sep 26 20:19:17 Hilbert kernel: [    0.437281] Simple Boot Flag at 0x79 set to 0x1
Sep 26 20:19:17 Hilbert kernel: [    0.437628] audit: initializing netlink socket (disabled)
Sep 26 20:19:17 Hilbert kernel: [    0.437639] type=2000 audit(1317061141.430:1): initialized
Sep 26 20:19:17 Hilbert kernel: [    0.465001] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Sep 26 20:19:17 Hilbert kernel: [    0.477610] VFS: Disk quotas dquot_6.5.2
Sep 26 20:19:17 Hilbert kernel: [    0.477671] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Sep 26 20:19:17 Hilbert kernel: [    0.478268] fuse init (API version 7.16)
Sep 26 20:19:17 Hilbert kernel: [    0.478352] msgmni has been set to 3982
Sep 26 20:19:17 Hilbert kernel: [    0.478681] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Sep 26 20:19:17 Hilbert kernel: [    0.478712] io scheduler noop registered
Sep 26 20:19:17 Hilbert kernel: [    0.478714] io scheduler deadline registered
Sep 26 20:19:17 Hilbert kernel: [    0.478751] io scheduler cfq registered (default)
Sep 26 20:19:17 Hilbert kernel: [    0.478866] pcieport 0000:00:01.0: setting latency timer to 64
Sep 26 20:19:17 Hilbert kernel: [    0.478902] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
Sep 26 20:19:17 Hilbert kernel: [    0.478951] pcieport 0000:00:1c.0: setting latency timer to 64
Sep 26 20:19:17 Hilbert kernel: [    0.479008] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
Sep 26 20:19:17 Hilbert kernel: [    0.479086] pcieport 0000:00:1c.1: setting latency timer to 64
Sep 26 20:19:17 Hilbert kernel: [    0.479143] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
Sep 26 20:19:17 Hilbert kernel: [    0.479224] pcieport 0000:00:1c.3: setting latency timer to 64
Sep 26 20:19:17 Hilbert kernel: [    0.479282] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
Sep 26 20:19:17 Hilbert kernel: [    0.479378] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Sep 26 20:19:17 Hilbert kernel: [    0.479400] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Sep 26 20:19:17 Hilbert kernel: [    0.479443] intel_idle: MWAIT substates: 0x22220
Sep 26 20:19:17 Hilbert kernel: [    0.479445] intel_idle: does not run on family 6 model 15
Sep 26 20:19:17 Hilbert kernel: [    0.479515] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
Sep 26 20:19:17 Hilbert kernel: [    0.479564] ACPI: AC Adapter [AC] (on-line)
Sep 26 20:19:17 Hilbert kernel: [    0.479634] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
Sep 26 20:19:17 Hilbert kernel: [    0.480069] ACPI: Lid Switch [LID]
Sep 26 20:19:17 Hilbert kernel: [    0.480113] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
Sep 26 20:19:17 Hilbert kernel: [    0.480117] ACPI: Power Button [PBTN]
Sep 26 20:19:17 Hilbert kernel: [    0.480157] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
Sep 26 20:19:17 Hilbert kernel: [    0.480161] ACPI: Sleep Button [SBTN]
Sep 26 20:19:17 Hilbert kernel: [    0.480186] ACPI: acpi_idle registered with cpuidle
Sep 26 20:19:17 Hilbert kernel: [    0.480330] Monitor-Mwait will be used to enter C-1 state
Sep 26 20:19:17 Hilbert kernel: [    0.480360] Monitor-Mwait will be used to enter C-2 state
Sep 26 20:19:17 Hilbert kernel: [    0.480385] Monitor-Mwait will be used to enter C-3 state
Sep 26 20:19:17 Hilbert kernel: [    0.480390] Marking TSC unstable due to TSC halts in idle
Sep 26 20:19:17 Hilbert kernel: [    0.505148] thermal LNXTHERM:00: registered as thermal_zone0
Sep 26 20:19:17 Hilbert kernel: [    0.505152] ACPI: Thermal Zone [THM] (81 C)
Sep 26 20:19:17 Hilbert kernel: [    0.505179] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
Sep 26 20:19:17 Hilbert kernel: [    0.505230] ERST: Table is not found!
Sep 26 20:19:17 Hilbert kernel: [    0.520181] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
Sep 26 20:19:17 Hilbert kernel: [    0.523766] ACPI: Battery Slot [BAT0] (battery present)
Sep 26 20:19:17 Hilbert kernel: [    0.643009] Freeing initrd memory: 13416k freed
Sep 26 20:19:17 Hilbert kernel: [    0.701610] Linux agpgart interface v0.103
Sep 26 20:19:17 Hilbert kernel: [    0.702846] brd: module loaded
Sep 26 20:19:17 Hilbert kernel: [    0.703352] loop: module loaded
Sep 26 20:19:17 Hilbert kernel: [    0.703497] ata_piix 0000:00:1f.1: version 2.13
Sep 26 20:19:17 Hilbert kernel: [    0.703512] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep 26 20:19:17 Hilbert kernel: [    0.703558] ata_piix 0000:00:1f.1: setting latency timer to 64
Sep 26 20:19:17 Hilbert kernel: [    0.703874] scsi0 : ata_piix
Sep 26 20:19:17 Hilbert kernel: [    0.703967] scsi1 : ata_piix
Sep 26 20:19:17 Hilbert kernel: [    0.704254] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
Sep 26 20:19:17 Hilbert kernel: [    0.704257] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
Sep 26 20:19:17 Hilbert kernel: [    0.704308] ata2: port disabled. ignoring.
Sep 26 20:19:17 Hilbert kernel: [    0.704565] Fixed MDIO Bus: probed
Sep 26 20:19:17 Hilbert kernel: [    0.704590] PPP generic driver version 2.4.2
Sep 26 20:19:17 Hilbert kernel: [    0.704627] tun: Universal TUN/TAP device driver, 1.6
Sep 26 20:19:17 Hilbert kernel: [    0.704629] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Sep 26 20:19:17 Hilbert kernel: [    0.704703] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sep 26 20:19:17 Hilbert kernel: [    0.704727] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
Sep 26 20:19:17 Hilbert kernel: [    0.704740] ehci_hcd 0000:00:1a.7: setting latency timer to 64
Sep 26 20:19:17 Hilbert kernel: [    0.704744] ehci_hcd 0000:00:1a.7: EHCI Host Controller
Sep 26 20:19:17 Hilbert kernel: [    0.704776] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Sep 26 20:19:17 Hilbert kernel: [    0.704812] ehci_hcd 0000:00:1a.7: debug port 1
Sep 26 20:19:17 Hilbert kernel: [    0.708702] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
Sep 26 20:19:17 Hilbert kernel: [    0.708721] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
Sep 26 20:19:17 Hilbert kernel: [    0.730018] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
Sep 26 20:19:17 Hilbert kernel: [    0.730142] hub 1-0:1.0: USB hub found
Sep 26 20:19:17 Hilbert kernel: [    0.730147] hub 1-0:1.0: 4 ports detected
Sep 26 20:19:17 Hilbert kernel: [    0.730218] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Sep 26 20:19:17 Hilbert kernel: [    0.730232] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Sep 26 20:19:17 Hilbert kernel: [    0.730236] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Sep 26 20:19:17 Hilbert kernel: [    0.730273] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Sep 26 20:19:17 Hilbert kernel: [    0.730306] ehci_hcd 0000:00:1d.7: debug port 1
Sep 26 20:19:17 Hilbert kernel: [    0.734187] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
Sep 26 20:19:17 Hilbert kernel: [    0.734201] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
Sep 26 20:19:17 Hilbert kernel: [    0.750015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Sep 26 20:19:17 Hilbert kernel: [    0.750105] hub 2-0:1.0: USB hub found
Sep 26 20:19:17 Hilbert kernel: [    0.750110] hub 2-0:1.0: 6 ports detected
Sep 26 20:19:17 Hilbert kernel: [    0.750189] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Sep 26 20:19:17 Hilbert kernel: [    0.750202] uhci_hcd: USB Universal Host Controller Interface driver
Sep 26 20:19:17 Hilbert kernel: [    0.750225] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Sep 26 20:19:17 Hilbert kernel: [    0.750232] uhci_hcd 0000:00:1a.0: setting latency timer to 64
Sep 26 20:19:17 Hilbert kernel: [    0.750236] uhci_hcd 0000:00:1a.0: UHCI Host Controller
Sep 26 20:19:17 Hilbert kernel: [    0.750265] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Sep 26 20:19:17 Hilbert kernel: [    0.750294] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
Sep 26 20:19:17 Hilbert kernel: [    0.750405] hub 3-0:1.0: USB hub found
Sep 26 20:19:17 Hilbert kernel: [    0.750409] hub 3-0:1.0: 2 ports detected
Sep 26 20:19:17 Hilbert kernel: [    0.750475] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Sep 26 20:19:17 Hilbert kernel: [    0.750482] uhci_hcd 0000:00:1a.1: setting latency timer to 64
Sep 26 20:19:17 Hilbert kernel: [    0.750486] uhci_hcd 0000:00:1a.1: UHCI Host Controller
Sep 26 20:19:17 Hilbert kernel: [    0.750527] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Sep 26 20:19:17 Hilbert kernel: [    0.750567] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
Sep 26 20:19:17 Hilbert kernel: [    0.750681] hub 4-0:1.0: USB hub found
Sep 26 20:19:17 Hilbert kernel: [    0.750685] hub 4-0:1.0: 2 ports detected
Sep 26 20:19:17 Hilbert kernel: [    0.750748] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Sep 26 20:19:17 Hilbert kernel: [    0.750754] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Sep 26 20:19:17 Hilbert kernel: [    0.750758] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Sep 26 20:19:17 Hilbert kernel: [    0.750794] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
Sep 26 20:19:17 Hilbert kernel: [    0.750824] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
Sep 26 20:19:17 Hilbert kernel: [    0.750937] hub 5-0:1.0: USB hub found
Sep 26 20:19:17 Hilbert kernel: [    0.750941] hub 5-0:1.0: 2 ports detected
Sep 26 20:19:17 Hilbert kernel: [    0.751003] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Sep 26 20:19:17 Hilbert kernel: [    0.751010] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Sep 26 20:19:17 Hilbert kernel: [    0.751014] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Sep 26 20:19:17 Hilbert kernel: [    0.751043] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
Sep 26 20:19:17 Hilbert kernel: [    0.751072] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
Sep 26 20:19:17 Hilbert kernel: [    0.751181] hub 6-0:1.0: USB hub found
Sep 26 20:19:17 Hilbert kernel: [    0.751187] hub 6-0:1.0: 2 ports detected
Sep 26 20:19:17 Hilbert kernel: [    0.751248] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
Sep 26 20:19:17 Hilbert kernel: [    0.751255] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Sep 26 20:19:17 Hilbert kernel: [    0.751259] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Sep 26 20:19:17 Hilbert kernel: [    0.751297] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
Sep 26 20:19:17 Hilbert kernel: [    0.751326] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
Sep 26 20:19:17 Hilbert kernel: [    0.751432] hub 7-0:1.0: USB hub found
Sep 26 20:19:17 Hilbert kernel: [    0.751436] hub 7-0:1.0: 2 ports detected
Sep 26 20:19:17 Hilbert kernel: [    0.751541] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Sep 26 20:19:17 Hilbert kernel: [    0.754607] serio: i8042 KBD port at 0x60,0x64 irq 1
Sep 26 20:19:17 Hilbert kernel: [    0.754615] serio: i8042 AUX port at 0x60,0x64 irq 12
Sep 26 20:19:17 Hilbert kernel: [    0.754721] mousedev: PS/2 mouse device common for all mice
Sep 26 20:19:17 Hilbert kernel: [    0.754860] rtc_cmos 00:03: RTC can wake from S4
Sep 26 20:19:17 Hilbert kernel: [    0.754984] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Sep 26 20:19:17 Hilbert kernel: [    0.755017] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Sep 26 20:19:17 Hilbert kernel: [    0.755115] device-mapper: uevent: version 1.0.3
Sep 26 20:19:17 Hilbert kernel: [    0.755182] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
Sep 26 20:19:17 Hilbert kernel: [    0.755244] cpuidle: using governor ladder
Sep 26 20:19:17 Hilbert kernel: [    0.755327] cpuidle: using governor menu
Sep 26 20:19:17 Hilbert kernel: [    0.755329] EFI Variables Facility v0.08 2004-May-17
Sep 26 20:19:17 Hilbert kernel: [    0.755589] TCP cubic registered
Sep 26 20:19:17 Hilbert kernel: [    0.755712] NET: Registered protocol family 10
Sep 26 20:19:17 Hilbert kernel: [    0.756169] NET: Registered protocol family 17
Sep 26 20:19:17 Hilbert kernel: [    0.756185] Registering the dns_resolver key type
Sep 26 20:19:17 Hilbert kernel: [    0.756272] PM: Hibernation image not present or could not be loaded.
Sep 26 20:19:17 Hilbert kernel: [    0.756284] registered taskstats version 1
Sep 26 20:19:17 Hilbert kernel: [    0.763774] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Sep 26 20:19:17 Hilbert kernel: [    0.768829]   Magic number: 11:154:343
Sep 26 20:19:17 Hilbert kernel: [    0.768873] tty tty60: hash matches
Sep 26 20:19:17 Hilbert kernel: [    0.768953] rtc_cmos 00:03: setting system clock to 2011-09-26 18:19:02 UTC (1317061142)
Sep 26 20:19:17 Hilbert kernel: [    0.769805] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Sep 26 20:19:17 Hilbert kernel: [    0.769808] EDD information not available.
Sep 26 20:19:17 Hilbert kernel: [    0.890515] ata1.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, D200, max UDMA/33
Sep 26 20:19:17 Hilbert kernel: [    0.930472] ata1.00: configured for UDMA/33
Sep 26 20:19:17 Hilbert kernel: [    0.938196] scsi 0:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-L632H D200 PQ: 0 ANSI: 5
Sep 26 20:19:17 Hilbert kernel: [    0.945328] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Sep 26 20:19:17 Hilbert kernel: [    0.945333] cdrom: Uniform CD-ROM driver Revision: 3.20
Sep 26 20:19:17 Hilbert kernel: [    0.945495] sr 0:0:0:0: Attached scsi CD-ROM sr0
Sep 26 20:19:17 Hilbert kernel: [    0.945584] sr 0:0:0:0: Attached scsi generic sg0 type 5
Sep 26 20:19:17 Hilbert kernel: [    0.947312] Freeing unused kernel memory: 984k freed
Sep 26 20:19:17 Hilbert kernel: [    0.947639] Write protecting the kernel read-only data: 10240k
Sep 26 20:19:17 Hilbert kernel: [    0.947909] Freeing unused kernel memory: 20k freed
Sep 26 20:19:17 Hilbert kernel: [    0.952435] Freeing unused kernel memory: 1400k freed
Sep 26 20:19:17 Hilbert kernel: [    1.022736] ahci 0000:00:1f.2: version 3.0
Sep 26 20:19:17 Hilbert kernel: [    1.022755] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep 26 20:19:17 Hilbert kernel: [    1.022817] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
Sep 26 20:19:17 Hilbert kernel: [    1.022894] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
Sep 26 20:19:17 Hilbert kernel: [    1.022898] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems 
Sep 26 20:19:17 Hilbert kernel: [    1.022903] ahci 0000:00:1f.2: setting latency timer to 64
Sep 26 20:19:17 Hilbert kernel: [    1.044990] b44 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Sep 26 20:19:17 Hilbert kernel: [    1.046488] scsi2 : ahci
Sep 26 20:19:17 Hilbert kernel: [    1.046815] sdhci: Secure Digital Host Controller Interface driver
Sep 26 20:19:17 Hilbert kernel: [    1.046817] sdhci: Copyright(c) Pierre Ossman
Sep 26 20:19:17 Hilbert kernel: [    1.047857] scsi3 : ahci
Sep 26 20:19:17 Hilbert kernel: [    1.048787] scsi4 : ahci
Sep 26 20:19:17 Hilbert kernel: [    1.048941] ata3: SATA max UDMA/133 abar m2048@0xfebfb800 port 0xfebfb900 irq 44
Sep 26 20:19:17 Hilbert kernel: [    1.048944] ata4: DUMMY
Sep 26 20:19:17 Hilbert kernel: [    1.048947] ata5: SATA max UDMA/133 abar m2048@0xfebfb800 port 0xfebfba00 irq 44
Sep 26 20:19:17 Hilbert kernel: [    1.110322] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
Sep 26 20:19:17 Hilbert kernel: [    1.110330] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
Sep 26 20:19:17 Hilbert kernel: [    1.110337] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
Sep 26 20:19:17 Hilbert kernel: [    1.170140] usb 2-6: new high speed USB device number 2 using ehci_hcd
Sep 26 20:19:17 Hilbert kernel: [    1.200171] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
Sep 26 20:19:17 Hilbert kernel: [    1.200202] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22)
Sep 26 20:19:17 Hilbert kernel: [    1.200235] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
Sep 26 20:19:17 Hilbert kernel: [    1.201285] mmc0: no vmmc regulator found
Sep 26 20:19:17 Hilbert kernel: [    1.202314] Registered led device: mmc0::
Sep 26 20:19:17 Hilbert kernel: [    1.203355] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA
Sep 26 20:19:17 Hilbert kernel: [    1.203406] b44: b44.c:v2.0
Sep 26 20:19:17 Hilbert kernel: [    1.242863] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:1d:09:a8:97:4c
Sep 26 20:19:17 Hilbert kernel: [    1.390100] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Sep 26 20:19:17 Hilbert kernel: [    1.390134] ata5: SATA link down (SStatus 0 SControl 300)
Sep 26 20:19:17 Hilbert kernel: [    1.392431] ata3.00: ATA-7: ST9200420AS, 3.ADC, max UDMA/133
Sep 26 20:19:17 Hilbert kernel: [    1.392434] ata3.00: 390721968 sectors, multi 8: LBA48 NCQ (depth 31/32)
Sep 26 20:19:17 Hilbert kernel: [    1.395415] ata3.00: configured for UDMA/133
Sep 26 20:19:17 Hilbert kernel: [    1.395578] scsi 2:0:0:0: Direct-Access     ATA      ST9200420AS      3.AD PQ: 0 ANSI: 5
Sep 26 20:19:17 Hilbert kernel: [    1.395735] sd 2:0:0:0: Attached scsi generic sg1 type 0
Sep 26 20:19:17 Hilbert kernel: [    1.395798] sd 2:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
Sep 26 20:19:17 Hilbert kernel: [    1.395916] sd 2:0:0:0: [sda] Write Protect is off
Sep 26 20:19:17 Hilbert kernel: [    1.395920] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
Sep 26 20:19:17 Hilbert kernel: [    1.395977] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep 26 20:19:17 Hilbert kernel: [    1.432968]  sda: sda1 sda2 sda3 < sda5 >
Sep 26 20:19:17 Hilbert kernel: [    1.433488] sd 2:0:0:0: [sda] Attached SCSI disk
Sep 26 20:19:17 Hilbert kernel: [    1.434969] firewire_ohci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Sep 26 20:19:17 Hilbert kernel: [    1.510155] firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
Sep 26 20:19:17 Hilbert kernel: [    1.610084] usb 3-2: new full speed USB device number 2 using uhci_hcd
Sep 26 20:19:17 Hilbert kernel: [    1.812466] hub 3-2:1.0: USB hub found
Sep 26 20:19:17 Hilbert kernel: [    1.814400] hub 3-2:1.0: 3 ports detected
Sep 26 20:19:17 Hilbert kernel: [    1.964065] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Sep 26 20:19:17 Hilbert kernel: [    2.010380] firewire_core: created device fw0: GUID 484fc000188ba470, S400
Sep 26 20:19:17 Hilbert kernel: [    2.091410] usb 3-2.1: new full speed USB device number 3 using uhci_hcd
Sep 26 20:19:17 Hilbert kernel: [    2.301420] usb 3-2.2: new full speed USB device number 4 using uhci_hcd
Sep 26 20:19:17 Hilbert kernel: [    2.521424] usb 3-2.3: new full speed USB device number 5 using uhci_hcd
Sep 26 20:19:17 Hilbert kernel: [    3.837842] Adding 1950716k swap on /dev/sda5.  Priority:-1 extents:1 across:1950716k 
Sep 26 20:19:17 Hilbert kernel: [    4.217973] lp: driver loaded but no devices found
Sep 26 20:19:17 Hilbert kernel: [    4.635342] acpi device:31: registered as cooling_device2
Sep 26 20:19:17 Hilbert kernel: [    4.635852] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2e/LNXVIDEO:00/input/input4
Sep 26 20:19:17 Hilbert kernel: [    4.635929] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
Sep 26 20:19:17 Hilbert kernel: [    4.635974] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
Sep 26 20:19:17 Hilbert kernel: [    4.690329] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
Sep 26 20:19:17 Hilbert kernel: [    5.044306] wmi: Mapper loaded
Sep 26 20:19:17 Hilbert kernel: [    5.165320] cfg80211: Calling CRDA to update world regulatory domain
Sep 26 20:19:17 Hilbert kernel: [    5.344082] input: Dell WMI hotkeys as /devices/virtual/input/input5
Sep 26 20:19:17 Hilbert kernel: [    5.423575] Bluetooth: Core ver 2.16
Sep 26 20:19:17 Hilbert kernel: [    5.423601] NET: Registered protocol family 31
Sep 26 20:19:17 Hilbert kernel: [    5.423603] Bluetooth: HCI device and connection manager initialized
Sep 26 20:19:17 Hilbert kernel: [    5.423606] Bluetooth: HCI socket layer initialized
Sep 26 20:19:17 Hilbert kernel: [    5.423607] Bluetooth: L2CAP socket layer initialized
Sep 26 20:19:17 Hilbert kernel: [    5.424553] Bluetooth: SCO socket layer initialized
Sep 26 20:19:17 Hilbert kernel: [    5.432045] Bluetooth: Generic Bluetooth USB driver ver 0.6
Sep 26 20:19:17 Hilbert kernel: [    5.432230] usbcore: registered new interface driver btusb
Sep 26 20:19:17 Hilbert kernel: [    5.535301] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04793/0x300000/0x0
Sep 26 20:19:17 Hilbert kernel: [    5.535311] serio: Synaptics pass-through port at isa0060/serio1/input0
Sep 26 20:19:17 Hilbert kernel: [    5.551228] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
Sep 26 20:19:17 Hilbert kernel: [    5.551231] iwl3945: Copyright(c) 2003-2011 Intel Corporation
Sep 26 20:19:17 Hilbert kernel: [    5.551305] iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Sep 26 20:19:17 Hilbert kernel: [    5.551320] iwl3945 0000:0c:00.0: setting latency timer to 64
Sep 26 20:19:17 Hilbert kernel: [    5.571196] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
Sep 26 20:19:17 Hilbert kernel: [    5.606684] iwl3945 0000:0c:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
Sep 26 20:19:17 Hilbert kernel: [    5.606688] iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG
Sep 26 20:19:17 Hilbert kernel: [    5.606971] iwl3945 0000:0c:00.0: irq 45 for MSI/MSI-X
Sep 26 20:19:17 Hilbert kernel: [    5.607220] Registered led device: phy0-led
Sep 26 20:19:17 Hilbert kernel: [    5.607271] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
Sep 26 20:19:17 Hilbert kernel: [    5.703297] r852 0000:03:01.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
Sep 26 20:19:17 Hilbert kernel: [    5.703378] r852: driver loaded successfully
Sep 26 20:19:17 Hilbert kernel: [    5.885418] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
Sep 26 20:19:17 Hilbert kernel: [    6.153353] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
Sep 26 20:19:17 Hilbert kernel: [    6.153358] cfg80211: World regulatory domain updated:
Sep 26 20:19:17 Hilbert kernel: [    6.153360] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Sep 26 20:19:17 Hilbert kernel: [    6.153363] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 26 20:19:17 Hilbert kernel: [    6.153366] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep 26 20:19:17 Hilbert kernel: [    6.153368] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep 26 20:19:17 Hilbert kernel: [    6.153371] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 26 20:19:17 Hilbert kernel: [    6.153374] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 26 20:19:17 Hilbert kernel: [    6.845922] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input7
Sep 26 20:19:17 Hilbert kernel: [    6.846021] generic-usb 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
Sep 26 20:19:17 Hilbert kernel: [    6.849992] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input8
Sep 26 20:19:17 Hilbert kernel: [    6.850157] generic-usb 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
Sep 26 20:19:17 Hilbert kernel: [    6.850192] usbcore: registered new interface driver usbhid
Sep 26 20:19:17 Hilbert kernel: [    6.850194] usbhid: USB HID core driver
Sep 26 20:19:17 Hilbert kernel: [    6.853883] Linux video capture interface: v2.00
Sep 26 20:19:17 Hilbert kernel: [    6.865441] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640)
Sep 26 20:19:17 Hilbert kernel: [    6.865977] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
Sep 26 20:19:17 Hilbert kernel: [    6.866643] input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input9
Sep 26 20:19:17 Hilbert kernel: [    6.866758] usbcore: registered new interface driver uvcvideo
Sep 26 20:19:17 Hilbert kernel: [    6.866762] USB Video Class driver (v1.1.0)
Sep 26 20:19:17 Hilbert kernel: [    7.066433] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Sep 26 20:19:17 Hilbert kernel: [    7.066508] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
Sep 26 20:19:17 Hilbert kernel: [    7.066541] HDA Intel 0000:00:1b.0: setting latency timer to 64
Sep 26 20:19:17 Hilbert kernel: [    7.230337] type=1400 audit(1317061148.958:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=649 comm="apparmor_parser"
Sep 26 20:19:17 Hilbert kernel: [    7.230348] type=1400 audit(1317061148.958:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=512 comm="apparmor_parser"
Sep 26 20:19:17 Hilbert kernel: [    7.230594] type=1400 audit(1317061148.958:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=649 comm="apparmor_parser"
Sep 26 20:19:17 Hilbert kernel: [    7.230609] type=1400 audit(1317061148.958:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=512 comm="apparmor_parser"
Sep 26 20:19:17 Hilbert kernel: [    7.230759] type=1400 audit(1317061148.958:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=649 comm="apparmor_parser"
Sep 26 20:19:17 Hilbert kernel: [    7.230777] type=1400 audit(1317061148.958:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=512 comm="apparmor_parser"
Sep 26 20:19:17 Hilbert kernel: [    7.231309] type=1400 audit(1317061148.958:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=676 comm="apparmor_parser"
Sep 26 20:19:17 Hilbert kernel: [    7.231563] type=1400 audit(1317061148.958:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=676 comm="apparmor_parser"
Sep 26 20:19:17 Hilbert kernel: [    7.231732] type=1400 audit(1317061148.958:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=676 comm="apparmor_parser"
Sep 26 20:19:17 Hilbert kernel: [    7.320543] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
Sep 26 20:19:17 Hilbert kernel: [    7.320655] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
Sep 26 20:19:17 Hilbert kernel: [    7.494678] nvidia: module license 'NVIDIA' taints kernel.
Sep 26 20:19:17 Hilbert kernel: [    7.494684] Disabling lock debugging due to kernel taint
Sep 26 20:19:17 Hilbert kernel: [    8.251884] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep 26 20:19:17 Hilbert kernel: [    8.251900] nvidia 0000:01:00.0: setting latency timer to 64
Sep 26 20:19:17 Hilbert kernel: [    8.251907] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
Sep 26 20:19:17 Hilbert kernel: [    8.252068] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  280.13  Wed Jul 27 16:53:56 PDT 2011
Sep 26 20:19:17 Hilbert kernel: [    9.190756] init: udev-fallback-graphics main process (867) terminated with status 1
Sep 26 20:19:17 Hilbert kernel: [   15.376631] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
Sep 26 20:19:17 Hilbert kernel: [   15.492766] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Sep 26 20:19:18 Hilbert kernel: [   16.280202] type=1400 audit(1317061158.008:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=956 comm="apparmor_parser"
Sep 26 20:19:18 Hilbert kernel: [   16.280472] type=1400 audit(1317061158.008:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=956 comm="apparmor_parser"
Sep 26 20:19:18 Hilbert kernel: [   16.280642] type=1400 audit(1317061158.008:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=956 comm="apparmor_parser"
Sep 26 20:19:18 Hilbert kernel: [   16.405157] ppdev: user-space parallel port driver
Sep 26 20:19:18 Hilbert modem-manager[952]: <info>  ModemManager (version 0.5) starting...
Sep 26 20:19:18 Hilbert modem-manager[952]: <info>  Loaded plugin Gobi
Sep 26 20:19:18 Hilbert modem-manager[952]: <info>  Loaded plugin MotoC
Sep 26 20:19:18 Hilbert modem-manager[952]: <info>  Loaded plugin Huawei
Sep 26 20:19:18 Hilbert modem-manager[952]: <info>  Loaded plugin Linktop
Sep 26 20:19:18 Hilbert modem-manager[952]: <info>  Loaded plugin Nokia
Sep 26 20:19:18 Hilbert modem-manager[952]: <info>  Loaded plugin ZTE
Sep 26 20:19:18 Hilbert modem-manager[952]: <info>  Loaded plugin SimTech
Sep 26 20:19:18 Hilbert modem-manager[952]: <info>  Loaded plugin Option
Sep 26 20:19:18 Hilbert modem-manager[952]: <info>  Loaded plugin Longcheer
Sep 26 20:19:18 Hilbert modem-manager[952]: <info>  Loaded plugin Ericsson MBM
Sep 26 20:19:18 Hilbert modem-manager[952]: <info>  Loaded plugin Option High-Speed
Sep 26 20:19:18 Hilbert modem-manager[952]: <info>  Loaded plugin X22X
Sep 26 20:19:18 Hilbert modem-manager[952]: <info>  Loaded plugin Generic
Sep 26 20:19:18 Hilbert modem-manager[952]: <info>  Loaded plugin Novatel
Sep 26 20:19:18 Hilbert NetworkManager[978]: <info> NetworkManager (version 0.9.1.90) is starting...
Sep 26 20:19:18 Hilbert NetworkManager[978]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
Sep 26 20:19:18 Hilbert modem-manager[952]: <info>  Loaded plugin Samsung
Sep 26 20:19:18 Hilbert modem-manager[952]: <info>  Loaded plugin Sierra
Sep 26 20:19:18 Hilbert modem-manager[952]: <info>  Loaded plugin AnyData
Sep 26 20:19:18 Hilbert modem-manager[952]: <info>  Loaded plugin Wavecom
Sep 26 20:19:18 Hilbert kernel: [   16.776396] type=1400 audit(1317061158.498:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=959 comm="apparmor_parser"
Sep 26 20:19:18 Hilbert kernel: [   16.776710] type=1400 audit(1317061158.498:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=959 comm="apparmor_parser"
Sep 26 20:19:18 Hilbert kernel: [   16.821488] type=1400 audit(1317061158.548:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=957 comm="apparmor_parser"
Sep 26 20:19:18 Hilbert kernel: [   16.824353] type=1400 audit(1317061158.548:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=957 comm="apparmor_parser"
Sep 26 20:19:18 Hilbert kernel: [   16.826129] type=1400 audit(1317061158.548:18): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=957 comm="apparmor_parser"
Sep 26 20:19:18 Hilbert kernel: [   16.902203] type=1400 audit(1317061158.628:19): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=980 comm="apparmor_parser"
Sep 26 20:19:18 Hilbert kernel: [   16.916107] type=1400 audit(1317061158.638:20): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=979 comm="apparmor_parser"
Sep 26 20:19:18 Hilbert NetworkManager[978]: <info> VPN: loaded org.freedesktop.NetworkManager.pptp
Sep 26 20:19:18 Hilbert NetworkManager[978]:    SCPlugin-Ifupdown: init!
Sep 26 20:19:18 Hilbert NetworkManager[978]:    SCPlugin-Ifupdown: update_system_hostname
Sep 26 20:19:18 Hilbert NetworkManager[978]:    SCPluginIfupdown: management mode: unmanaged
Sep 26 20:19:18 Hilbert NetworkManager[978]:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/net/wlan0, iface: wlan0)
Sep 26 20:19:18 Hilbert NetworkManager[978]:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/net/wlan0, iface: wlan0): no ifupdown configuration found.
Sep 26 20:19:18 Hilbert NetworkManager[978]:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1e.0/0000:03:00.0/ssb0:0/net/eth0, iface: eth0)
Sep 26 20:19:18 Hilbert NetworkManager[978]:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1e.0/0000:03:00.0/ssb0:0/net/eth0, iface: eth0): no ifupdown configuration found.
Sep 26 20:19:18 Hilbert NetworkManager[978]:    SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo)
Sep 26 20:19:18 Hilbert NetworkManager[978]:    SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found.
Sep 26 20:19:18 Hilbert NetworkManager[978]:    SCPlugin-Ifupdown: end _init.
Sep 26 20:19:18 Hilbert NetworkManager[978]: <info> Loaded plugin ifupdown: (C) 2008 Canonical Ltd.  To report bugs please use the NetworkManager mailing list.
Sep 26 20:19:18 Hilbert NetworkManager[978]: <info> Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
Sep 26 20:19:18 Hilbert NetworkManager[978]:    Ifupdown: get unmanaged devices count: 0
Sep 26 20:19:18 Hilbert NetworkManager[978]:    SCPlugin-Ifupdown: (14490416) ... get_connections.
Sep 26 20:19:18 Hilbert NetworkManager[978]:    SCPlugin-Ifupdown: (14490416) ... get_connections (managed=false): return empty list.
Sep 26 20:19:18 Hilbert NetworkManager[978]:    keyfile: parsing Condivisa ... 
Sep 26 20:19:18 Hilbert NetworkManager[978]:    keyfile:     read connection 'Condivisa'
Sep 26 20:19:18 Hilbert NetworkManager[978]:    keyfile: parsing Alice-37768910 ... 
Sep 26 20:19:18 Hilbert NetworkManager[978]:    keyfile:     read connection 'Alice-37768910'
Sep 26 20:19:18 Hilbert NetworkManager[978]:    keyfile: parsing Cavo ... 
Sep 26 20:19:18 Hilbert NetworkManager[978]:    keyfile:     read connection 'Cavo'
Sep 26 20:19:18 Hilbert NetworkManager[978]:    Ifupdown: get unmanaged devices count: 0
Sep 26 20:19:18 Hilbert NetworkManager[978]: <info> modem-manager is now available
Sep 26 20:19:18 Hilbert NetworkManager[978]: <info> monitoring kernel firmware directory '/lib/firmware'.
Sep 26 20:19:18 Hilbert NetworkManager[978]: <info> found WiFi radio killswitch rfkill3 (at /sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/ieee80211/phy0/rfkill3) (driver (unknown))
Sep 26 20:19:18 Hilbert NetworkManager[978]: <info> found WiFi radio killswitch rfkill0 (at /sys/devices/platform/dell-laptop/rfkill/rfkill0) (driver dell-laptop)
Sep 26 20:19:18 Hilbert NetworkManager[978]: <info> WiFi enabled by radio killswitch; enabled by state file
Sep 26 20:19:18 Hilbert NetworkManager[978]: <info> WWAN enabled by radio killswitch; enabled by state file
Sep 26 20:19:18 Hilbert NetworkManager[978]: <info> WiMAX enabled by radio killswitch; enabled by state file
Sep 26 20:19:18 Hilbert NetworkManager[978]: <info> Networking is enabled by state file
Sep 26 20:19:18 Hilbert NetworkManager[978]: <info> (wlan0): driver supports SSID scans (scan_capa 0x01).
Sep 26 20:19:18 Hilbert NetworkManager[978]: <info> (wlan0): new 802.11 WiFi device (driver: 'iwl3945' ifindex: 3)
Sep 26 20:19:18 Hilbert NetworkManager[978]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/0
Sep 26 20:19:18 Hilbert NetworkManager[978]: <info> (wlan0): now managed
Sep 26 20:19:18 Hilbert NetworkManager[978]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Sep 26 20:19:18 Hilbert NetworkManager[978]: <info> (wlan0): bringing up device.
Sep 26 20:19:19 Hilbert kernel: [   17.409450] iwl3945 0000:0c:00.0: loaded firmware version 15.32.2.9
Sep 26 20:19:19 Hilbert NetworkManager[978]: <info> (wlan0): preparing device.
Sep 26 20:19:19 Hilbert NetworkManager[978]: <info> (wlan0): deactivating device (reason 'managed') [2]
Sep 26 20:19:19 Hilbert NetworkManager[978]: <info> (eth0): carrier is OFF
Sep 26 20:19:19 Hilbert NetworkManager[978]: <info> (eth0): new Ethernet device (driver: 'b44' ifindex: 2)
Sep 26 20:19:19 Hilbert NetworkManager[978]: <info> (eth0): exported as /org/freedesktop/NetworkManager/Devices/1
Sep 26 20:19:19 Hilbert kernel: [   17.490449] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sep 26 20:19:19 Hilbert NetworkManager[978]: <info> (eth0): now managed
Sep 26 20:19:19 Hilbert NetworkManager[978]: <info> (eth0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Sep 26 20:19:19 Hilbert NetworkManager[978]: <info> (eth0): bringing up device.
Sep 26 20:19:19 Hilbert NetworkManager[978]: <info> (eth0): preparing device.
Sep 26 20:19:19 Hilbert NetworkManager[978]: <info> (eth0): deactivating device (reason 'managed') [2]
Sep 26 20:19:19 Hilbert NetworkManager[978]: <warn> bluez error getting default adapter: The name org.bluez was not provided by any .service files
Sep 26 20:19:19 Hilbert kernel: [   17.615123] ADDRCONF(NETDEV_UP): eth0: link is not ready
Sep 26 20:19:19 Hilbert NetworkManager[978]: <info> wpa_supplicant started
Sep 26 20:19:19 Hilbert NetworkManager[978]: <info> (wlan0): supplicant interface state: starting -> ready
Sep 26 20:19:19 Hilbert NetworkManager[978]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Sep 26 20:19:19 Hilbert NetworkManager[978]: <info> (wlan0): supplicant interface state: ready -> inactive
Sep 26 20:19:22 Hilbert kernel: [   20.400735] Bluetooth: RFCOMM TTY layer initialized
Sep 26 20:19:22 Hilbert kernel: [   20.400741] Bluetooth: RFCOMM socket layer initialized
Sep 26 20:19:22 Hilbert kernel: [   20.400743] Bluetooth: RFCOMM ver 1.11
Sep 26 20:19:22 Hilbert kernel: [   20.450674] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Sep 26 20:19:22 Hilbert kernel: [   20.450677] Bluetooth: BNEP filters: protocol multicast
Sep 26 20:19:22 Hilbert NetworkManager[978]: <warn> bluez error getting default adapter: No such adapter
Sep 26 20:19:23 Hilbert kernel: [   21.917957] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
Sep 26 20:19:23 Hilbert kernel: [   22.010590] EXT4-fs (sda2): re-mounted. Opts: commit=0
Sep 26 20:19:23 Hilbert NetworkManager[978]: <info> Auto-activating connection 'Alice-37768910'.
Sep 26 20:19:23 Hilbert NetworkManager[978]: <info> Activation (wlan0) starting connection 'Alice-37768910'
Sep 26 20:19:23 Hilbert NetworkManager[978]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Sep 26 20:19:23 Hilbert NetworkManager[978]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Sep 26 20:19:23 Hilbert NetworkManager[978]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Sep 26 20:19:23 Hilbert NetworkManager[978]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Sep 26 20:19:23 Hilbert NetworkManager[978]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Sep 26 20:19:23 Hilbert NetworkManager[978]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Sep 26 20:19:23 Hilbert NetworkManager[978]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Sep 26 20:19:23 Hilbert NetworkManager[978]: <info> Activation (wlan0/wireless): connection 'Alice-37768910' has security, and secrets exist.  No new secrets needed.
Sep 26 20:19:23 Hilbert NetworkManager[978]: <info> Config: added 'ssid' value 'Alice-37768910'
Sep 26 20:19:23 Hilbert NetworkManager[978]: <info> Config: added 'scan_ssid' value '1'
Sep 26 20:19:23 Hilbert NetworkManager[978]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Sep 26 20:19:23 Hilbert NetworkManager[978]: <info> Config: added 'psk' value '<omitted>'
Sep 26 20:19:23 Hilbert NetworkManager[978]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Sep 26 20:19:23 Hilbert NetworkManager[978]: <info> Config: set interface ap_scan to 1
Sep 26 20:19:23 Hilbert NetworkManager[978]: <info> (wlan0): supplicant interface state: inactive -> scanning
Sep 26 20:19:27 Hilbert wpa_supplicant[1041]: Trying to authenticate with 00:23:8e:4b:11:70 (SSID='Alice-37768910' freq=2412 MHz)
Sep 26 20:19:27 Hilbert wpa_supplicant[1041]: Trying to associate with 00:23:8e:4b:11:70 (SSID='Alice-37768910' freq=2412 MHz)
Sep 26 20:19:27 Hilbert NetworkManager[978]: <info> (wlan0): supplicant interface state: scanning -> associating
Sep 26 20:19:27 Hilbert wpa_supplicant[1041]: Associated with 00:23:8e:4b:11:70
Sep 26 20:19:27 Hilbert kernel: [   26.052589] wlan0: authenticate with 00:23:8e:4b:11:70 (try 1)
Sep 26 20:19:27 Hilbert kernel: [   26.054438] wlan0: authenticated
Sep 26 20:19:27 Hilbert kernel: [   26.054615] wlan0: associate with 00:23:8e:4b:11:70 (try 1)
Sep 26 20:19:27 Hilbert kernel: [   26.057070] wlan0: RX AssocResp from 00:23:8e:4b:11:70 (capab=0x411 status=0 aid=1)
Sep 26 20:19:27 Hilbert kernel: [   26.057076] wlan0: associated
Sep 26 20:19:27 Hilbert kernel: [   26.059534] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sep 26 20:19:27 Hilbert NetworkManager[978]: <info> (wlan0): supplicant interface state: associating -> 4-way handshake
Sep 26 20:19:27 Hilbert NetworkManager[978]: <info> (wlan0): supplicant interface state: 4-way handshake -> group handshake
Sep 26 20:19:27 Hilbert wpa_supplicant[1041]: WPA: Key negotiation completed with 00:23:8e:4b:11:70 [PTK=TKIP GTK=TKIP]
Sep 26 20:19:27 Hilbert wpa_supplicant[1041]: CTRL-EVENT-CONNECTED - Connection to 00:23:8e:4b:11:70 completed (auth) [id=0 id_str=]
Sep 26 20:19:27 Hilbert NetworkManager[978]: <info> (wlan0): supplicant interface state: group handshake -> completed
Sep 26 20:19:27 Hilbert NetworkManager[978]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful.  Connected to wireless network 'Alice-37768910'.
Sep 26 20:19:27 Hilbert NetworkManager[978]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Sep 26 20:19:27 Hilbert NetworkManager[978]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Sep 26 20:19:27 Hilbert NetworkManager[978]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
Sep 26 20:19:27 Hilbert NetworkManager[978]: <info> Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Sep 26 20:19:28 Hilbert NetworkManager[978]: <info> dhclient started with pid 1415
Sep 26 20:19:28 Hilbert NetworkManager[978]: <info> Activation (wlan0) Beginning IP6 addrconf.
Sep 26 20:19:28 Hilbert NetworkManager[978]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Sep 26 20:19:28 Hilbert dhclient: Internet Systems Consortium DHCP Client 4.1.1-P1
Sep 26 20:19:28 Hilbert dhclient: Copyright 2004-2010 Internet Systems Consortium.
Sep 26 20:19:28 Hilbert dhclient: All rights reserved.
Sep 26 20:19:28 Hilbert dhclient: For info, please visit https://www.isc.org/software/dhcp/
Sep 26 20:19:28 Hilbert dhclient: 
Sep 26 20:19:28 Hilbert NetworkManager[978]: <info> (wlan0): DHCPv4 state changed nbi -> preinit
Sep 26 20:19:28 Hilbert dhclient: Listening on LPF/wlan0/00:1c:bf:61:5f:35
Sep 26 20:19:28 Hilbert dhclient: Sending on   LPF/wlan0/00:1c:bf:61:5f:35
Sep 26 20:19:28 Hilbert dhclient: Sending on   Socket/fallback
Sep 26 20:19:28 Hilbert dhclient: DHCPREQUEST of 192.168.1.170 on wlan0 to 255.255.255.255 port 67
Sep 26 20:19:28 Hilbert dhclient: DHCPNAK from 192.168.1.1
Sep 26 20:19:28 Hilbert NetworkManager[978]: <info> (wlan0): DHCPv4 state changed preinit -> expire
Sep 26 20:19:28 Hilbert dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 3
Sep 26 20:19:28 Hilbert NetworkManager[978]: <info> (wlan0): DHCPv4 state changed expire -> preinit
Sep 26 20:19:30 Hilbert dhclient: DHCPOFFER of 192.168.1.170 from 192.168.1.1
Sep 26 20:19:30 Hilbert dhclient: DHCPREQUEST of 192.168.1.170 on wlan0 to 255.255.255.255 port 67
Sep 26 20:19:30 Hilbert dhclient: DHCPACK of 192.168.1.170 from 192.168.1.1
Sep 26 20:19:30 Hilbert NetworkManager[978]: <info> (wlan0): DHCPv4 state changed preinit -> bound
Sep 26 20:19:30 Hilbert NetworkManager[978]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Sep 26 20:19:30 Hilbert NetworkManager[978]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started...
Sep 26 20:19:30 Hilbert NetworkManager[978]: <info>   address 192.168.1.170
Sep 26 20:19:30 Hilbert NetworkManager[978]: <info>   prefix 24 (255.255.255.0)
Sep 26 20:19:30 Hilbert NetworkManager[978]: <info>   gateway 192.168.1.1
Sep 26 20:19:30 Hilbert NetworkManager[978]: <info>   hostname 'Hilbert'
Sep 26 20:19:30 Hilbert NetworkManager[978]: <info>   nameserver '192.168.1.1'
Sep 26 20:19:30 Hilbert NetworkManager[978]: <info>   domain name 'homenet.telecomitalia.it'
Sep 26 20:19:30 Hilbert NetworkManager[978]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
Sep 26 20:19:30 Hilbert dhclient: bound to 192.168.1.170 -- renewal in 9755 seconds.
Sep 26 20:19:31 Hilbert NetworkManager[978]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Sep 26 20:19:31 Hilbert NetworkManager[978]: <info> Policy set 'Alice-37768910' (wlan0) as default for IPv4 routing and DNS.
Sep 26 20:19:31 Hilbert NetworkManager[978]: <info> Activation (wlan0) successful, device activated.
Sep 26 20:19:31 Hilbert NetworkManager[978]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
Sep 26 20:19:31 Hilbert NetworkManager[978]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete.
Sep 26 20:19:32 Hilbert kernel: [   30.522769] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
Sep 26 20:19:32 Hilbert kernel: [   30.885285] EXT4-fs (sda2): re-mounted. Opts: commit=0
Sep 26 20:19:38 Hilbert kernel: [   36.650064] wlan0: no IPv6 routers present
Sep 26 20:19:48 Hilbert NetworkManager[978]: <info> (wlan0): IP6 addrconf timed out or failed.
Sep 26 20:19:48 Hilbert NetworkManager[978]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) scheduled...
Sep 26 20:19:48 Hilbert NetworkManager[978]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) started...
Sep 26 20:19:48 Hilbert NetworkManager[978]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
Sep 26 20:19:48 Hilbert NetworkManager[978]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
Sep 26 20:19:48 Hilbert NetworkManager[978]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) complete.
Sep 26 20:19:50 Hilbert kernel: [   48.510056] CE: hpet increased min_delta_ns to 20113 nsec
Sep 26 20:20:31 Hilbert kernel: Kernel logging (proc) stopped.
Sep 26 20:23:05 Hilbert kernel: imklog 5.8.1, log source = /proc/kmsg started.
Sep 26 20:23:05 Hilbert kernel: [    0.000000] Initializing cgroup subsys cpuset
Sep 26 20:23:05 Hilbert kernel: [    0.000000] Initializing cgroup subsys cpu
Sep 26 20:23:05 Hilbert kernel: [    0.000000] Linux version 3.0.0-11-generic (buildd@crested) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu2) ) #18-Ubuntu SMP Tue Sep 13 23:38:01 UTC 2011 (Ubuntu 3.0.0-11.18-generic 3.0.4)
Sep 26 20:23:05 Hilbert kernel: [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-11-generic root=UUID=c49615ed-88be-4cff-812e-d4389247f03d ro quiet splash vt.handoff=7
Sep 26 20:23:05 Hilbert kernel: [    0.000000] KERNEL supported cpus:
Sep 26 20:23:05 Hilbert kernel: [    0.000000]   Intel GenuineIntel
Sep 26 20:23:05 Hilbert kernel: [    0.000000]   AMD AuthenticAMD
Sep 26 20:23:05 Hilbert kernel: [    0.000000]   Centaur CentaurHauls
Sep 26 20:23:05 Hilbert kernel: [    0.000000] BIOS-provided physical RAM map:
Sep 26 20:23:05 Hilbert kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
Sep 26 20:23:05 Hilbert kernel: [    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
Sep 26 20:23:05 Hilbert kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 000000007fe6d800 (usable)
Sep 26 20:23:05 Hilbert kernel: [    0.000000]  BIOS-e820: 000000007fe6d800 - 0000000080000000 (reserved)
Sep 26 20:23:05 Hilbert kernel: [    0.000000]  BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
Sep 26 20:23:05 Hilbert kernel: [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Sep 26 20:23:05 Hilbert kernel: [    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
Sep 26 20:23:05 Hilbert kernel: [    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
Sep 26 20:23:05 Hilbert kernel: [    0.000000]  BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
Sep 26 20:23:05 Hilbert kernel: [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
Sep 26 20:23:05 Hilbert kernel: [    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Sep 26 20:23:05 Hilbert kernel: [    0.000000] NX (Execute Disable) protection: active
Sep 26 20:23:05 Hilbert kernel: [    0.000000] DMI 2.4 present.
Sep 26 20:23:05 Hilbert kernel: [    0.000000] DMI: Dell Inc. Inspiron 1520                   /0KY768, BIOS A04 11/05/2007
Sep 26 20:23:05 Hilbert kernel: [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
Sep 26 20:23:05 Hilbert kernel: [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
Sep 26 20:23:05 Hilbert kernel: [    0.000000] No AGP bridge found
Sep 26 20:23:05 Hilbert kernel: [    0.000000] last_pfn = 0x7fe6d max_arch_pfn = 0x400000000
Sep 26 20:23:05 Hilbert kernel: [    0.000000] MTRR default type: uncachable
Sep 26 20:23:05 Hilbert kernel: [    0.000000] MTRR fixed ranges enabled:
Sep 26 20:23:05 Hilbert kernel: [    0.000000]   00000-9FFFF write-back
Sep 26 20:23:05 Hilbert kernel: [    0.000000]   A0000-BFFFF uncachable
Sep 26 20:23:05 Hilbert kernel: [    0.000000]   C0000-CFFFF write-protect
Sep 26 20:23:05 Hilbert kernel: [    0.000000]   D0000-EFFFF uncachable
Sep 26 20:23:05 Hilbert kernel: [    0.000000]   F0000-FFFFF write-protect
Sep 26 20:23:05 Hilbert kernel: [    0.000000] MTRR variable ranges enabled:
Sep 26 20:23:05 Hilbert kernel: [    0.000000]   0 base 000000000 mask F80000000 write-back
Sep 26 20:23:05 Hilbert kernel: [    0.000000]   1 base 07FF00000 mask FFFF00000 uncachable
Sep 26 20:23:05 Hilbert kernel: [    0.000000]   2 disabled
Sep 26 20:23:05 Hilbert kernel: [    0.000000]   3 disabled
Sep 26 20:23:05 Hilbert kernel: [    0.000000]   4 disabled
Sep 26 20:23:05 Hilbert kernel: [    0.000000]   5 disabled
Sep 26 20:23:05 Hilbert kernel: [    0.000000]   6 disabled
Sep 26 20:23:05 Hilbert kernel: [    0.000000]   7 disabled
Sep 26 20:23:05 Hilbert kernel: [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Sep 26 20:23:05 Hilbert kernel: [    0.000000] original variable MTRRs
Sep 26 20:23:05 Hilbert kernel: [    0.000000] reg 0, base: 0GB, range: 2GB, type WB
Sep 26 20:23:05 Hilbert kernel: [    0.000000] reg 1, base: 2047MB, range: 1MB, type UC
Sep 26 20:23:05 Hilbert kernel: [    0.000000] total RAM covered: 2047M
Sep 26 20:23:05 Hilbert kernel: [    0.000000] Found optimal setting for mtrr clean up
Sep 26 20:23:05 Hilbert kernel: [    0.000000]  gran_size: 64K 	chunk_size: 2M 	num_reg: 2  	lose cover RAM: 0G
Sep 26 20:23:05 Hilbert kernel: [    0.000000] New variable MTRRs
Sep 26 20:23:05 Hilbert kernel: [    0.000000] reg 0, base: 0GB, range: 2GB, type WB
Sep 26 20:23:05 Hilbert kernel: [    0.000000] reg 1, base: 2047MB, range: 1MB, type UC
Sep 26 20:23:05 Hilbert kernel: [    0.000000] initial memory mapped : 0 - 20000000
Sep 26 20:23:05 Hilbert kernel: [    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
Sep 26 20:23:05 Hilbert kernel: [    0.000000] init_memory_mapping: 0000000000000000-000000007fe6d000
Sep 26 20:23:05 Hilbert kernel: [    0.000000]  0000000000 - 007fe00000 page 2M
Sep 26 20:23:05 Hilbert kernel: [    0.000000]  007fe00000 - 007fe6d000 page 4k
Sep 26 20:23:05 Hilbert kernel: [    0.000000] kernel direct mapping tables up to 7fe6d000 @ 7fe69000-7fe6d000
Sep 26 20:23:05 Hilbert kernel: [    0.000000] RAMDISK: 365bc000 - 372d6000
Sep 26 20:23:05 Hilbert kernel: [    0.000000] ACPI: RSDP 00000000000fbbf0 00024 (v02 DELL  )
Sep 26 20:23:05 Hilbert kernel: [    0.000000] ACPI: XSDT 000000007fe6f200 0005C (v01 DELL    M08     27D70B05 ASL  00000061)
Sep 26 20:23:05 Hilbert kernel: [    0.000000] ACPI: FACP 000000007fe6f09c 000F4 (v04 DELL    M08     27D70B05 ASL  00000061)
Sep 26 20:23:05 Hilbert kernel: [    0.000000] ACPI: DSDT 000000007fe6f800 0565E (v02 INT430 SYSFexxx 00001001 INTL 20050624)
Sep 26 20:23:05 Hilbert kernel: [    0.000000] ACPI: FACS 000000007fe7e000 00040
Sep 26 20:23:05 Hilbert kernel: [    0.000000] ACPI: HPET 000000007fe6f300 00038 (v01 DELL    M08     00000001 ASL  00000061)
Sep 26 20:23:05 Hilbert kernel: [    0.000000] ACPI: APIC 000000007fe6f400 00068 (v01 DELL    M08     27D70B05 ASL  00000047)
Sep 26 20:23:05 Hilbert kernel: [    0.000000] ACPI: MCFG 000000007fe6f3c0 0003E (v16 DELL    M08     27D70B05 ASL  00000061)
Sep 26 20:23:05 Hilbert kernel: [    0.000000] ACPI: SLIC 000000007fe6f49c 00176 (v01 DELL    M08     27D70B05 ASL  00000061)
Sep 26 20:23:05 Hilbert kernel: [    0.000000] ACPI: BOOT 000000007fe6efc0 00028 (v01 DELL    M08     27D70B05 ASL  00000061)
Sep 26 20:23:05 Hilbert kernel: [    0.000000] ACPI: SSDT 000000007fe6d9bc 004CC (v01  PmRef    CpuPm 00003000 INTL 20050624)
Sep 26 20:23:05 Hilbert kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Sep 26 20:23:05 Hilbert kernel: [    0.000000] No NUMA configuration found
Sep 26 20:23:05 Hilbert kernel: [    0.000000] Faking a node at 0000000000000000-000000007fe6d000
Sep 26 20:23:05 Hilbert kernel: [    0.000000] Initmem setup node 0 0000000000000000-000000007fe6d000
Sep 26 20:23:05 Hilbert kernel: [    0.000000]   NODE_DATA [000000007fe64000 - 000000007fe68fff]
Sep 26 20:23:05 Hilbert kernel: [    0.000000]  [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0
Sep 26 20:23:05 Hilbert kernel: [    0.000000] Zone PFN ranges:
Sep 26 20:23:05 Hilbert kernel: [    0.000000]   DMA      0x00000010 -> 0x00001000
Sep 26 20:23:05 Hilbert kernel: [    0.000000]   DMA32    0x00001000 -> 0x00100000
Sep 26 20:23:05 Hilbert kernel: [    0.000000]   Normal   empty
Sep 26 20:23:05 Hilbert kernel: [    0.000000] Movable zone start PFN for each node
Sep 26 20:23:05 Hilbert kernel: [    0.000000] early_node_map[2] active PFN ranges
Sep 26 20:23:05 Hilbert kernel: [    0.000000]     0: 0x00000010 -> 0x0000009f
Sep 26 20:23:05 Hilbert kernel: [    0.000000]     0: 0x00000100 -> 0x0007fe6d
Sep 26 20:23:05 Hilbert kernel: [    0.000000] On node 0 totalpages: 523772
Sep 26 20:23:05 Hilbert kernel: [    0.000000]   DMA zone: 56 pages used for memmap
Sep 26 20:23:05 Hilbert kernel: [    0.000000]   DMA zone: 5 pages reserved
Sep 26 20:23:05 Hilbert kernel: [    0.000000]   DMA zone: 3922 pages, LIFO batch:0
Sep 26 20:23:05 Hilbert kernel: [    0.000000]   DMA32 zone: 7107 pages used for memmap
Sep 26 20:23:05 Hilbert kernel: [    0.000000]   DMA32 zone: 512682 pages, LIFO batch:31
Sep 26 20:23:05 Hilbert kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x1008
Sep 26 20:23:05 Hilbert kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Sep 26 20:23:05 Hilbert kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Sep 26 20:23:05 Hilbert kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Sep 26 20:23:05 Hilbert kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Sep 26 20:23:05 Hilbert kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Sep 26 20:23:05 Hilbert kernel: [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Sep 26 20:23:05 Hilbert kernel: [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Sep 26 20:23:05 Hilbert kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Sep 26 20:23:05 Hilbert kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Sep 26 20:23:05 Hilbert kernel: [    0.000000] ACPI: IRQ0 used by override.
Sep 26 20:23:05 Hilbert kernel: [    0.000000] ACPI: IRQ2 used by override.
Sep 26 20:23:05 Hilbert kernel: [    0.000000] ACPI: IRQ9 used by override.
Sep 26 20:23:05 Hilbert kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Sep 26 20:23:05 Hilbert kernel: [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Sep 26 20:23:05 Hilbert kernel: [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
Sep 26 20:23:05 Hilbert kernel: [    0.000000] nr_irqs_gsi: 40
Sep 26 20:23:05 Hilbert kernel: [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Sep 26 20:23:05 Hilbert kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Sep 26 20:23:05 Hilbert kernel: [    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:74000000)
Sep 26 20:23:05 Hilbert kernel: [    0.000000] Booting paravirtualized kernel on bare hardware
Sep 26 20:23:05 Hilbert kernel: [    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
Sep 26 20:23:05 Hilbert kernel: [    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007fc00000 s79616 r8192 d22784 u1048576
Sep 26 20:23:05 Hilbert kernel: [    0.000000] pcpu-alloc: s79616 r8192 d22784 u1048576 alloc=1*2097152
Sep 26 20:23:05 Hilbert kernel: [    0.000000] pcpu-alloc: [0] 0 1 
Sep 26 20:23:05 Hilbert kernel: [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 516604
Sep 26 20:23:05 Hilbert kernel: [    0.000000] Policy zone: DMA32
Sep 26 20:23:05 Hilbert kernel: [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-11-generic root=UUID=c49615ed-88be-4cff-812e-d4389247f03d ro quiet splash vt.handoff=7
Sep 26 20:23:05 Hilbert kernel: [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
Sep 26 20:23:05 Hilbert kernel: [    0.000000] Checking aperture...
Sep 26 20:23:05 Hilbert kernel: [    0.000000] No AGP bridge found
Sep 26 20:23:05 Hilbert kernel: [    0.000000] Calgary: detecting Calgary via BIOS EBDA area
Sep 26 20:23:05 Hilbert kernel: [    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Sep 26 20:23:05 Hilbert kernel: [    0.000000] Memory: 2039268k/2095540k available (6104k kernel code, 452k absent, 55820k reserved, 4880k data, 984k init)
Sep 26 20:23:05 Hilbert kernel: [    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Sep 26 20:23:05 Hilbert kernel: [    0.000000] Hierarchical RCU implementation.
Sep 26 20:23:05 Hilbert kernel: [    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
Sep 26 20:23:05 Hilbert kernel: [    0.000000] NR_IRQS:16640 nr_irqs:512 16
Sep 26 20:23:05 Hilbert kernel: [    0.000000] Extended CMOS year: 2000
Sep 26 20:23:05 Hilbert kernel: [    0.000000] vt handoff: transparent VT on vt#7
Sep 26 20:23:05 Hilbert kernel: [    0.000000] Console: colour VGA+ 80x25
Sep 26 20:23:05 Hilbert kernel: [    0.000000] console [tty0] enabled
Sep 26 20:23:05 Hilbert kernel: [    0.000000] allocated 16777216 bytes of page_cgroup
Sep 26 20:23:05 Hilbert kernel: [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Sep 26 20:23:05 Hilbert kernel: [    0.000000] hpet clockevent registered
Sep 26 20:23:05 Hilbert kernel: [    0.000000] Fast TSC calibration using PIT
Sep 26 20:23:05 Hilbert kernel: [    0.000000] Detected 2194.266 MHz processor.
Sep 26 20:23:05 Hilbert kernel: [    0.010005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.53 BogoMIPS (lpj=21942660)
Sep 26 20:23:05 Hilbert kernel: [    0.010010] pid_max: default: 32768 minimum: 301
Sep 26 20:23:05 Hilbert kernel: [    0.010042] Security Framework initialized
Sep 26 20:23:05 Hilbert kernel: [    0.010061] AppArmor: AppArmor initialized
Sep 26 20:23:05 Hilbert kernel: [    0.010063] Yama: becoming mindful.
Sep 26 20:23:05 Hilbert kernel: [    0.010306] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Sep 26 20:23:05 Hilbert kernel: [    0.011473] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Sep 26 20:23:05 Hilbert kernel: [    0.012024] Mount-cache hash table entries: 256
Sep 26 20:23:05 Hilbert kernel: [    0.012180] Initializing cgroup subsys cpuacct
Sep 26 20:23:05 Hilbert kernel: [    0.012187] Initializing cgroup subsys memory
Sep 26 20:23:05 Hilbert kernel: [    0.012197] Initializing cgroup subsys devices
Sep 26 20:23:05 Hilbert kernel: [    0.012199] Initializing cgroup subsys freezer
Sep 26 20:23:05 Hilbert kernel: [    0.012202] Initializing cgroup subsys net_cls
Sep 26 20:23:05 Hilbert kernel: [    0.012204] Initializing cgroup subsys blkio
Sep 26 20:23:05 Hilbert kernel: [    0.012211] Initializing cgroup subsys perf_event
Sep 26 20:23:05 Hilbert kernel: [    0.012246] CPU: Physical Processor ID: 0
Sep 26 20:23:05 Hilbert kernel: [    0.012248] CPU: Processor Core ID: 0
Sep 26 20:23:05 Hilbert kernel: [    0.012251] mce: CPU supports 6 MCE banks
Sep 26 20:23:05 Hilbert kernel: [    0.012261] CPU0: Thermal monitoring enabled (TM2)
Sep 26 20:23:05 Hilbert kernel: [    0.012266] using mwait in idle threads.
Sep 26 20:23:05 Hilbert kernel: [    0.014796] ACPI: Core revision 20110413
Sep 26 20:23:05 Hilbert kernel: [    0.022839] ftrace: allocating 25651 entries in 101 pages
Sep 26 20:23:05 Hilbert kernel: [    0.030433] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Sep 26 20:23:05 Hilbert kernel: [    0.133779] CPU0: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0b
Sep 26 20:23:05 Hilbert kernel: [    0.140000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
Sep 26 20:23:05 Hilbert kernel: [    0.140000] PEBS disabled due to CPU errata.
Sep 26 20:23:05 Hilbert kernel: [    0.140000] ... version:                2
Sep 26 20:23:05 Hilbert kernel: [    0.140000] ... bit width:              40
Sep 26 20:23:05 Hilbert kernel: [    0.140000] ... generic registers:      2
Sep 26 20:23:05 Hilbert kernel: [    0.140000] ... value mask:             000000ffffffffff
Sep 26 20:23:05 Hilbert kernel: [    0.140000] ... max period:             000000007fffffff
Sep 26 20:23:05 Hilbert kernel: [    0.140000] ... fixed-purpose events:   3
Sep 26 20:23:05 Hilbert kernel: [    0.140000] ... event mask:             0000000700000003
Sep 26 20:23:05 Hilbert kernel: [    0.140000] Booting Node   0, Processors  #1 Ok.
Sep 26 20:23:05 Hilbert kernel: [    0.140000] smpboot cpu 1: start_ip = 9a000
Sep 26 20:23:05 Hilbert kernel: [    0.300018] Brought up 2 CPUs
Sep 26 20:23:05 Hilbert kernel: [    0.300021] Total of 2 processors activated (8776.27 BogoMIPS).
Sep 26 20:23:05 Hilbert kernel: [    0.301275] devtmpfs: initialized
Sep 26 20:23:05 Hilbert kernel: [    0.301426] print_constraints: dummy: 
Sep 26 20:23:05 Hilbert kernel: [    0.301460] Time: 18:22:50  Date: 09/26/11
Sep 26 20:23:05 Hilbert kernel: [    0.301496] NET: Registered protocol family 16
Sep 26 20:23:05 Hilbert kernel: [    0.301526] Trying to unpack rootfs image as initramfs...
Sep 26 20:23:05 Hilbert kernel: [    0.301627] ACPI: bus type pci registered
Sep 26 20:23:05 Hilbert kernel: [    0.301690] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
Sep 26 20:23:05 Hilbert kernel: [    0.301693] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
Sep 26 20:23:05 Hilbert kernel: [    0.310066] PCI: Using configuration type 1 for base access
Sep 26 20:23:05 Hilbert kernel: [    0.310073] dmi type 0xB1 record - unknown flag
Sep 26 20:23:05 Hilbert kernel: [    0.310919] bio: create slab <bio-0> at 0
Sep 26 20:23:05 Hilbert kernel: [    0.312130] ACPI: EC: Look up EC in DSDT
Sep 26 20:23:05 Hilbert kernel: [    0.319513] ACPI: SSDT 000000007fe6e4f2 00286 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
Sep 26 20:23:05 Hilbert kernel: [    0.319782] ACPI: Dynamic OEM Table Load:
Sep 26 20:23:05 Hilbert kernel: [    0.319786] ACPI: SSDT           (null) 00286 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
Sep 26 20:23:05 Hilbert kernel: [    0.319891] ACPI: SSDT 000000007fe6de88 005E5 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
Sep 26 20:23:05 Hilbert kernel: [    0.320173] ACPI: Dynamic OEM Table Load:
Sep 26 20:23:05 Hilbert kernel: [    0.320176] ACPI: SSDT           (null) 005E5 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
Sep 26 20:23:05 Hilbert kernel: [    0.320363] ACPI: SSDT 000000007fe6e778 000C4 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
Sep 26 20:23:05 Hilbert kernel: [    0.320624] ACPI: Dynamic OEM Table Load:
Sep 26 20:23:05 Hilbert kernel: [    0.320627] ACPI: SSDT           (null) 000C4 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
Sep 26 20:23:05 Hilbert kernel: [    0.320698] ACPI: SSDT 000000007fe6e46d 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
Sep 26 20:23:05 Hilbert kernel: [    0.320952] ACPI: Dynamic OEM Table Load:
Sep 26 20:23:05 Hilbert kernel: [    0.320955] ACPI: SSDT           (null) 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
Sep 26 20:23:05 Hilbert kernel: [    0.321119] ACPI: Interpreter enabled
Sep 26 20:23:05 Hilbert kernel: [    0.321122] ACPI: (supports S0 S3 S4 S5)
Sep 26 20:23:05 Hilbert kernel: [    0.321137] ACPI: Using IOAPIC for interrupt routing
Sep 26 20:23:05 Hilbert kernel: [    0.352018] ACPI: No dock devices found.
Sep 26 20:23:05 Hilbert kernel: [    0.352021] HEST: Table not found.
Sep 26 20:23:05 Hilbert kernel: [    0.352025] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
Sep 26 20:23:05 Hilbert kernel: [    0.360686] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Sep 26 20:23:05 Hilbert kernel: [    0.377836] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
Sep 26 20:23:05 Hilbert kernel: [    0.377840] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
Sep 26 20:23:05 Hilbert kernel: [    0.377843] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
Sep 26 20:23:05 Hilbert kernel: [    0.377846] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
Sep 26 20:23:05 Hilbert kernel: [    0.377849] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xf3ffffff] (ignored)
Sep 26 20:23:05 Hilbert kernel: [    0.377851] pci_root PNP0A03:00: host bridge window [mem 0xf8000000-0xfebfffff] (ignored)
Sep 26 20:23:05 Hilbert kernel: [    0.377854] pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff] (ignored)
Sep 26 20:23:05 Hilbert kernel: [    0.377857] pci_root PNP0A03:00: host bridge window [mem 0xfed1c000-0xfed1ffff] (ignored)
Sep 26 20:23:05 Hilbert kernel: [    0.377859] pci_root PNP0A03:00: host bridge window [mem 0xfed90000-0xfed9ffff] (ignored)
Sep 26 20:23:05 Hilbert kernel: [    0.377862] pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff] (ignored)
Sep 26 20:23:05 Hilbert kernel: [    0.377865] pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff] (ignored)
Sep 26 20:23:05 Hilbert kernel: [    0.377868] pci_root PNP0A03:00: host bridge window [mem 0xffb00000-0xffefffff] (ignored)
Sep 26 20:23:05 Hilbert kernel: [    0.377882] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
Sep 26 20:23:05 Hilbert kernel: [    0.377929] pci 0000:00:01.0: [8086:2a01] type 1 class 0x000604
Sep 26 20:23:05 Hilbert kernel: [    0.377964] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
Sep 26 20:23:05 Hilbert kernel: [    0.377968] pci 0000:00:01.0: PME# disabled
Sep 26 20:23:05 Hilbert kernel: [    0.378025] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
Sep 26 20:23:05 Hilbert kernel: [    0.378084] pci 0000:00:1a.0: reg 20: [io  0x6f20-0x6f3f]
Sep 26 20:23:05 Hilbert kernel: [    0.378126] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
Sep 26 20:23:05 Hilbert kernel: [    0.378185] pci 0000:00:1a.1: reg 20: [io  0x6f00-0x6f1f]
Sep 26 20:23:05 Hilbert kernel: [    0.378243] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
Sep 26 20:23:05 Hilbert kernel: [    0.378269] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff]
Sep 26 20:23:05 Hilbert kernel: [    0.378362] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
Sep 26 20:23:05 Hilbert kernel: [    0.378368] pci 0000:00:1a.7: PME# disabled
Sep 26 20:23:05 Hilbert kernel: [    0.378399] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
Sep 26 20:23:05 Hilbert kernel: [    0.378422] pci 0000:00:1b.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit]
Sep 26 20:23:05 Hilbert kernel: [    0.378508] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Sep 26 20:23:05 Hilbert kernel: [    0.378513] pci 0000:00:1b.0: PME# disabled
Sep 26 20:23:05 Hilbert kernel: [    0.378544] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
Sep 26 20:23:05 Hilbert kernel: [    0.378634] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Sep 26 20:23:05 Hilbert kernel: [    0.378639] pci 0000:00:1c.0: PME# disabled
Sep 26 20:23:05 Hilbert kernel: [    0.378675] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
Sep 26 20:23:05 Hilbert kernel: [    0.378764] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Sep 26 20:23:05 Hilbert kernel: [    0.378769] pci 0000:00:1c.1: PME# disabled
Sep 26 20:23:05 Hilbert kernel: [    0.378804] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604
Sep 26 20:23:05 Hilbert kernel: [    0.378894] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
Sep 26 20:23:05 Hilbert kernel: [    0.378899] pci 0000:00:1c.3: PME# disabled
Sep 26 20:23:05 Hilbert kernel: [    0.378934] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
Sep 26 20:23:05 Hilbert kernel: [    0.378993] pci 0000:00:1d.0: reg 20: [io  0x6f80-0x6f9f]
Sep 26 20:23:05 Hilbert kernel: [    0.379034] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
Sep 26 20:23:05 Hilbert kernel: [    0.379094] pci 0000:00:1d.1: reg 20: [io  0x6f60-0x6f7f]
Sep 26 20:23:05 Hilbert kernel: [    0.379136] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
Sep 26 20:23:05 Hilbert kernel: [    0.379195] pci 0000:00:1d.2: reg 20: [io  0x6f40-0x6f5f]
Sep 26 20:23:05 Hilbert kernel: [    0.379252] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
Sep 26 20:23:05 Hilbert kernel: [    0.379278] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff]
Sep 26 20:23:05 Hilbert kernel: [    0.379372] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Sep 26 20:23:05 Hilbert kernel: [    0.379378] pci 0000:00:1d.7: PME# disabled
Sep 26 20:23:05 Hilbert kernel: [    0.379403] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
Sep 26 20:23:05 Hilbert kernel: [    0.379492] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
Sep 26 20:23:05 Hilbert kernel: [    0.379612] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
Sep 26 20:23:05 Hilbert kernel: [    0.379619] pci 0000:00:1f.0: quirk: [io  0x1080-0x10bf] claimed by ICH6 GPIO
Sep 26 20:23:05 Hilbert kernel: [    0.379624] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
Sep 26 20:23:05 Hilbert kernel: [    0.379630] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
Sep 26 20:23:05 Hilbert kernel: [    0.379677] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
Sep 26 20:23:05 Hilbert kernel: [    0.379694] pci 0000:00:1f.1: reg 10: [io  0x01f0-0x01f7]
Sep 26 20:23:05 Hilbert kernel: [    0.379707] pci 0000:00:1f.1: reg 14: [io  0x03f4-0x03f7]
Sep 26 20:23:05 Hilbert kernel: [    0.379720] pci 0000:00:1f.1: reg 18: [io  0x0170-0x0177]
Sep 26 20:23:05 Hilbert kernel: [    0.379733] pci 0000:00:1f.1: reg 1c: [io  0x0374-0x0377]
Sep 26 20:23:05 Hilbert kernel: [    0.379745] pci 0000:00:1f.1: reg 20: [io  0x6fa0-0x6faf]
Sep 26 20:23:05 Hilbert kernel: [    0.379799] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
Sep 26 20:23:05 Hilbert kernel: [    0.379827] pci 0000:00:1f.2: reg 10: [io  0x6eb0-0x6eb7]
Sep 26 20:23:05 Hilbert kernel: [    0.379839] pci 0000:00:1f.2: reg 14: [io  0x6eb8-0x6ebb]
Sep 26 20:23:05 Hilbert kernel: [    0.379852] pci 0000:00:1f.2: reg 18: [io  0x6ec0-0x6ec7]
Sep 26 20:23:05 Hilbert kernel: [    0.379864] pci 0000:00:1f.2: reg 1c: [io  0x6ec8-0x6ecb]
Sep 26 20:23:05 Hilbert kernel: [    0.380012] pci 0000:00:1f.2: reg 20: [io  0x6ee0-0x6eff]
Sep 26 20:23:05 Hilbert kernel: [    0.380025] pci 0000:00:1f.2: reg 24: [mem 0xfebfb800-0xfebfbfff]
Sep 26 20:23:05 Hilbert kernel: [    0.380074] pci 0000:00:1f.2: PME# supported from D3hot
Sep 26 20:23:05 Hilbert kernel: [    0.380079] pci 0000:00:1f.2: PME# disabled
Sep 26 20:23:05 Hilbert kernel: [    0.380103] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
Sep 26 20:23:05 Hilbert kernel: [    0.380120] pci 0000:00:1f.3: reg 10: [mem 0xfebfb700-0xfebfb7ff]
Sep 26 20:23:05 Hilbert kernel: [    0.380165] pci 0000:00:1f.3: reg 20: [io  0x10c0-0x10df]
Sep 26 20:23:05 Hilbert kernel: [    0.380253] pci 0000:01:00.0: [10de:0407] type 0 class 0x000300
Sep 26 20:23:05 Hilbert kernel: [    0.380274] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
Sep 26 20:23:05 Hilbert kernel: [    0.380295] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
Sep 26 20:23:05 Hilbert kernel: [    0.380317] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
Sep 26 20:23:05 Hilbert kernel: [    0.380332] pci 0000:01:00.0: reg 24: [io  0xef00-0xef7f]
Sep 26 20:23:05 Hilbert kernel: [    0.380347] pci 0000:01:00.0: reg 30: [mem 0xfea00000-0xfea1ffff pref]
Sep 26 20:23:05 Hilbert kernel: [    0.380431] pci 0000:00:01.0: PCI bridge to [bus 01-01]
Sep 26 20:23:05 Hilbert kernel: [    0.380434] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
Sep 26 20:23:05 Hilbert kernel: [    0.380438] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfeafffff]
Sep 26 20:23:05 Hilbert kernel: [    0.380443] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
Sep 26 20:23:05 Hilbert kernel: [    0.380507] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
Sep 26 20:23:05 Hilbert kernel: [    0.380512] pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
Sep 26 20:23:05 Hilbert kernel: [    0.380518] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
Sep 26 20:23:05 Hilbert kernel: [    0.380526] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
Sep 26 20:23:05 Hilbert kernel: [    0.380690] pci 0000:0c:00.0: [8086:4222] type 0 class 0x000280
Sep 26 20:23:05 Hilbert kernel: [    0.380746] pci 0000:0c:00.0: reg 10: [mem 0xf9fff000-0xf9ffffff]
Sep 26 20:23:05 Hilbert kernel: [    0.381091] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
Sep 26 20:23:05 Hilbert kernel: [    0.381104] pci 0000:0c:00.0: PME# disabled
Sep 26 20:23:05 Hilbert kernel: [    0.381175] pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
Sep 26 20:23:05 Hilbert kernel: [    0.381203] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
Sep 26 20:23:05 Hilbert kernel: [    0.381209] pci 0000:00:1c.1:   bridge window [io  0xf000-0x0000] (disabled)
Sep 26 20:23:05 Hilbert kernel: [    0.381214] pci 0000:00:1c.1:   bridge window [mem 0xf9f00000-0xf9ffffff]
Sep 26 20:23:05 Hilbert kernel: [    0.381222] pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
Sep 26 20:23:05 Hilbert kernel: [    0.381286] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
Sep 26 20:23:05 Hilbert kernel: [    0.381291] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
Sep 26 20:23:05 Hilbert kernel: [    0.381296] pci 0000:00:1c.3:   bridge window [mem 0xf9c00000-0xf9efffff]
Sep 26 20:23:05 Hilbert kernel: [    0.381305] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
Sep 26 20:23:05 Hilbert kernel: [    0.381353] pci 0000:03:00.0: [14e4:170c] type 0 class 0x000200
Sep 26 20:23:05 Hilbert kernel: [    0.381375] pci 0000:03:00.0: reg 10: [mem 0xf9bfe000-0xf9bfffff]
Sep 26 20:23:05 Hilbert kernel: [    0.381462] pci 0000:03:00.0: supports D1 D2
Sep 26 20:23:05 Hilbert kernel: [    0.381464] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Sep 26 20:23:05 Hilbert kernel: [    0.381470] pci 0000:03:00.0: PME# disabled
Sep 26 20:23:05 Hilbert kernel: [    0.381492] pci 0000:03:01.0: [1180:0832] type 0 class 0x000c00
Sep 26 20:23:05 Hilbert kernel: [    0.381510] pci 0000:03:01.0: proprietary Ricoh MMC controller disabled (via firewire function)
Sep 26 20:23:05 Hilbert kernel: [    0.381512] pci 0000:03:01.0: MMC cards are now supported by standard SDHCI controller
Sep 26 20:23:05 Hilbert kernel: [    0.381529] pci 0000:03:01.0: reg 10: [mem 0xf9bfd800-0xf9bfdfff]
Sep 26 20:23:05 Hilbert kernel: [    0.381619] pci 0000:03:01.0: supports D1 D2
Sep 26 20:23:05 Hilbert kernel: [    0.381622] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
Sep 26 20:23:05 Hilbert kernel: [    0.381627] pci 0000:03:01.0: PME# disabled
Sep 26 20:23:05 Hilbert kernel: [    0.381652] pci 0000:03:01.1: [1180:0822] type 0 class 0x000805
Sep 26 20:23:05 Hilbert kernel: [    0.381674] pci 0000:03:01.1: reg 10: [mem 0xf9bfd400-0xf9bfd4ff]
Sep 26 20:23:05 Hilbert kernel: [    0.381766] pci 0000:03:01.1: supports D1 D2
Sep 26 20:23:05 Hilbert kernel: [    0.381768] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
Sep 26 20:23:05 Hilbert kernel: [    0.381773] pci 0000:03:01.1: PME# disabled
Sep 26 20:23:05 Hilbert kernel: [    0.381798] pci 0000:03:01.2: [1180:0592] type 0 class 0x000880
Sep 26 20:23:05 Hilbert kernel: [    0.381821] pci 0000:03:01.2: reg 10: [mem 0xf9bfd600-0xf9bfd6ff]
Sep 26 20:23:05 Hilbert kernel: [    0.381912] pci 0000:03:01.2: supports D1 D2
Sep 26 20:23:05 Hilbert kernel: [    0.381914] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
Sep 26 20:23:05 Hilbert kernel: [    0.381920] pci 0000:03:01.2: PME# disabled
Sep 26 20:23:05 Hilbert kernel: [    0.381944] pci 0000:03:01.3: [1180:0852] type 0 class 0x000880
Sep 26 20:23:05 Hilbert kernel: [    0.381968] pci 0000:03:01.3: reg 10: [mem 0xf9bfd700-0xf9bfd7ff]
Sep 26 20:23:05 Hilbert kernel: [    0.382058] pci 0000:03:01.3: supports D1 D2
Sep 26 20:23:05 Hilbert kernel: [    0.382060] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
Sep 26 20:23:05 Hilbert kernel: [    0.382065] pci 0000:03:01.3: PME# disabled
Sep 26 20:23:05 Hilbert kernel: [    0.382140] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
Sep 26 20:23:05 Hilbert kernel: [    0.382146] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
Sep 26 20:23:05 Hilbert kernel: [    0.382151] pci 0000:00:1e.0:   bridge window [mem 0xf9b00000-0xf9bfffff]
Sep 26 20:23:05 Hilbert kernel: [    0.382159] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
Sep 26 20:23:05 Hilbert kernel: [    0.382162] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
Sep 26 20:23:05 Hilbert kernel: [    0.382165] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
Sep 26 20:23:05 Hilbert kernel: [    0.382199] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Sep 26 20:23:05 Hilbert kernel: [    0.382397] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
Sep 26 20:23:05 Hilbert kernel: [    0.382484] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
Sep 26 20:23:05 Hilbert kernel: [    0.382522] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
Sep 26 20:23:05 Hilbert kernel: [    0.382562] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
Sep 26 20:23:05 Hilbert kernel: [    0.382604] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
Sep 26 20:23:05 Hilbert kernel: [    0.382647]  pci0000:00: Requesting ACPI _OSC control (0x1d)
Sep 26 20:23:05 Hilbert kernel: [    0.382651]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
Sep 26 20:23:05 Hilbert kernel: [    0.382653] ACPI _OSC control for PCIe not granted, disabling ASPM
Sep 26 20:23:05 Hilbert kernel: [    0.390313] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *7
Sep 26 20:23:05 Hilbert kernel: [    0.390378] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
Sep 26 20:23:05 Hilbert kernel: [    0.390440] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4
Sep 26 20:23:05 Hilbert kernel: [    0.390506] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
Sep 26 20:23:05 Hilbert kernel: [    0.390567] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Sep 26 20:23:05 Hilbert kernel: [    0.390631] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Sep 26 20:23:05 Hilbert kernel: [    0.390697] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Sep 26 20:23:05 Hilbert kernel: [    0.390752] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Sep 26 20:23:05 Hilbert kernel: [    0.390888] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Sep 26 20:23:05 Hilbert kernel: [    0.390893] vgaarb: loaded
Sep 26 20:23:05 Hilbert kernel: [    0.390895] vgaarb: bridge control possible 0000:01:00.0
Sep 26 20:23:05 Hilbert kernel: [    0.391098] SCSI subsystem initialized
Sep 26 20:23:05 Hilbert kernel: [    0.391177] libata version 3.00 loaded.
Sep 26 20:23:05 Hilbert kernel: [    0.391225] usbcore: registered new interface driver usbfs
Sep 26 20:23:05 Hilbert kernel: [    0.391235] usbcore: registered new interface driver hub
Sep 26 20:23:05 Hilbert kernel: [    0.391264] usbcore: registered new device driver usb
Sep 26 20:23:05 Hilbert kernel: [    0.391351] PCI: Using ACPI for IRQ routing
Sep 26 20:23:05 Hilbert kernel: [    0.393996] PCI: pci_cache_line_size set to 64 bytes
Sep 26 20:23:05 Hilbert kernel: [    0.394128] reserve RAM buffer: 000000000009f000 - 000000000009ffff 
Sep 26 20:23:05 Hilbert kernel: [    0.394131] reserve RAM buffer: 000000007fe6d800 - 000000007fffffff 
Sep 26 20:23:05 Hilbert kernel: [    0.394232] NetLabel: Initializing
Sep 26 20:23:05 Hilbert kernel: [    0.394234] NetLabel:  domain hash size = 128
Sep 26 20:23:05 Hilbert kernel: [    0.394235] NetLabel:  protocols = UNLABELED CIPSOv4
Sep 26 20:23:05 Hilbert kernel: [    0.394248] NetLabel:  unlabeled traffic allowed by default
Sep 26 20:23:05 Hilbert kernel: [    0.394288] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Sep 26 20:23:05 Hilbert kernel: [    0.394295] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Sep 26 20:23:05 Hilbert kernel: [    0.394299] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Sep 26 20:23:05 Hilbert kernel: [    0.400235] Switching to clocksource hpet
Sep 26 20:23:05 Hilbert kernel: [    0.407417] AppArmor: AppArmor Filesystem Enabled
Sep 26 20:23:05 Hilbert kernel: [    0.407458] pnp: PnP ACPI init
Sep 26 20:23:05 Hilbert kernel: [    0.407479] ACPI: bus type pnp registered
Sep 26 20:23:05 Hilbert kernel: [    0.409510] Switched to NOHz mode on CPU #0
Sep 26 20:23:05 Hilbert kernel: [    0.409708] Switched to NOHz mode on CPU #1
Sep 26 20:23:05 Hilbert kernel: [    0.416052] pnp 00:00: [bus 00-ff]
Sep 26 20:23:05 Hilbert kernel: [    0.416055] pnp 00:00: [io  0x0000-0x0cf7 window]
Sep 26 20:23:05 Hilbert kernel: [    0.416058] pnp 00:00: [io  0x0cf8-0x0cff]
Sep 26 20:23:05 Hilbert kernel: [    0.416060] pnp 00:00: [io  0x0d00-0xffff window]
Sep 26 20:23:05 Hilbert kernel: [    0.416063] pnp 00:00: [mem 0x000a0000-0x000bffff window]
Sep 26 20:23:05 Hilbert kernel: [    0.416065] pnp 00:00: [mem 0x000d0000-0x000dffff window]
Sep 26 20:23:05 Hilbert kernel: [    0.416067] pnp 00:00: [mem 0x80000000-0xf3ffffff window]
Sep 26 20:23:05 Hilbert kernel: [    0.416069] pnp 00:00: [mem 0xf8000000-0xfebfffff window]
Sep 26 20:23:05 Hilbert kernel: [    0.416072] pnp 00:00: [mem 0xfec10000-0xfecfffff window]
Sep 26 20:23:05 Hilbert kernel: [    0.416074] pnp 00:00: [mem 0xfed1c000-0xfed1ffff window]
Sep 26 20:23:05 Hilbert kernel: [    0.416076] pnp 00:00: [mem 0xfed90000-0xfed9ffff window]
Sep 26 20:23:05 Hilbert kernel: [    0.416078] pnp 00:00: [mem 0xfeda7000-0xfedfffff window]
Sep 26 20:23:05 Hilbert kernel: [    0.416080] pnp 00:00: [mem 0xfee10000-0xff9fffff window]
Sep 26 20:23:05 Hilbert kernel: [    0.416086] pnp 00:00: [mem 0xffb00000-0xffefffff window]
Sep 26 20:23:05 Hilbert kernel: [    0.416175] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
Sep 26 20:23:05 Hilbert kernel: [    0.416208] pnp 00:01: [irq 12]
Sep 26 20:23:05 Hilbert kernel: [    0.416231] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active)
Sep 26 20:23:05 Hilbert kernel: [    0.416246] pnp 00:02: [io  0x0060]
Sep 26 20:23:05 Hilbert kernel: [    0.416249] pnp 00:02: [io  0x0064]
Sep 26 20:23:05 Hilbert kernel: [    0.416250] pnp 00:02: [io  0x0062]
Sep 26 20:23:05 Hilbert kernel: [    0.416252] pnp 00:02: [io  0x0066]
Sep 26 20:23:05 Hilbert kernel: [    0.416258] pnp 00:02: [irq 1]
Sep 26 20:23:05 Hilbert kernel: [    0.416282] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
Sep 26 20:23:05 Hilbert kernel: [    0.416297] pnp 00:03: [io  0x0070-0x0071]
Sep 26 20:23:05 Hilbert kernel: [    0.416303] pnp 00:03: [irq 8]
Sep 26 20:23:05 Hilbert kernel: [    0.416305] pnp 00:03: [io  0x0072-0x0077]
Sep 26 20:23:05 Hilbert kernel: [    0.416326] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
Sep 26 20:23:05 Hilbert kernel: [    0.416341] pnp 00:04: [io  0x0061]
Sep 26 20:23:05 Hilbert kernel: [    0.416343] pnp 00:04: [io  0x0063]
Sep 26 20:23:05 Hilbert kernel: [    0.416345] pnp 00:04: [io  0x0065]
Sep 26 20:23:05 Hilbert kernel: [    0.416347] pnp 00:04: [io  0x0067]
Sep 26 20:23:05 Hilbert kernel: [    0.416368] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
Sep 26 20:23:05 Hilbert kernel: [    0.416382] pnp 00:05: [io  0x0c80-0x0cff]
Sep 26 20:23:05 Hilbert kernel: [    0.416443] system 00:05: [io  0x0c80-0x0cff] could not be reserved
Sep 26 20:23:05 Hilbert kernel: [    0.416447] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
Sep 26 20:23:05 Hilbert kernel: [    0.416464] pnp 00:06: [dma 4]
Sep 26 20:23:05 Hilbert kernel: [    0.416466] pnp 00:06: [io  0x0000-0x000f]
Sep 26 20:23:05 Hilbert kernel: [    0.416468] pnp 00:06: [io  0x0080-0x0085]
Sep 26 20:23:05 Hilbert kernel: [    0.416470] pnp 00:06: [io  0x0087-0x008f]
Sep 26 20:23:05 Hilbert kernel: [    0.416472] pnp 00:06: [io  0x00c0-0x00df]
Sep 26 20:23:05 Hilbert kernel: [    0.416474] pnp 00:06: [io  0x0010-0x001f]
Sep 26 20:23:05 Hilbert kernel: [    0.416476] pnp 00:06: [io  0x0090-0x0091]
Sep 26 20:23:05 Hilbert kernel: [    0.416478] pnp 00:06: [io  0x0093-0x009f]
Sep 26 20:23:05 Hilbert kernel: [    0.416502] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
Sep 26 20:23:05 Hilbert kernel: [    0.416516] pnp 00:07: [io  0x00f0-0x00ff]
Sep 26 20:23:05 Hilbert kernel: [    0.416522] pnp 00:07: [irq 13]
Sep 26 20:23:05 Hilbert kernel: [    0.416548] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
Sep 26 20:23:05 Hilbert kernel: [    0.416583] pnp 00:08: [mem 0xfed00000-0xfed003ff]
Sep 26 20:23:05 Hilbert kernel: [    0.416632] system 00:08: [mem 0xfed00000-0xfed003ff] has been reserved
Sep 26 20:23:05 Hilbert kernel: [    0.416636] system 00:08: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
Sep 26 20:23:05 Hilbert kernel: [    0.416760] pnp 00:09: [io  0x0900-0x097f]
Sep 26 20:23:05 Hilbert kernel: [    0.416762] pnp 00:09: [io  0x0092]
Sep 26 20:23:05 Hilbert kernel: [    0.416764] pnp 00:09: [io  0x00b2-0x00b3]
Sep 26 20:23:05 Hilbert kernel: [    0.416766] pnp 00:09: [io  0x0020-0x0021]
Sep 26 20:23:05 Hilbert kernel: [    0.416768] pnp 00:09: [io  0x00a0-0x00a1]
Sep 26 20:23:05 Hilbert kernel: [    0.416770] pnp 00:09: [irq 0 disabled]
Sep 26 20:23:05 Hilbert kernel: [    0.416772] pnp 00:09: [io  0x04d0-0x04d1]
Sep 26 20:23:05 Hilbert kernel: [    0.416774] pnp 00:09: [io  0x1000-0x1005]
Sep 26 20:23:05 Hilbert kernel: [    0.416775] pnp 00:09: [io  0x1008-0x100f]
Sep 26 20:23:05 Hilbert kernel: [    0.416790] pnp 00:09: disabling [io  0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
Sep 26 20:23:05 Hilbert kernel: [    0.416793] pnp 00:09: disabling [io  0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
Sep 26 20:23:05 Hilbert kernel: [    0.416843] system 00:09: [io  0x0900-0x097f] has been reserved
Sep 26 20:23:05 Hilbert kernel: [    0.416846] system 00:09: [io  0x04d0-0x04d1] has been reserved
Sep 26 20:23:05 Hilbert kernel: [    0.416850] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
Sep 26 20:23:05 Hilbert kernel: [    0.416866] pnp 00:0a: [io  0xf400-0xf4fe]
Sep 26 20:23:05 Hilbert kernel: [    0.416868] pnp 00:0a: [io  0x0086]
Sep 26 20:23:05 Hilbert kernel: [    0.416870] pnp 00:0a: [io  0x1006-0x1007]
Sep 26 20:23:05 Hilbert kernel: [    0.416872] pnp 00:0a: [io  0x100a-0x1059]
Sep 26 20:23:05 Hilbert kernel: [    0.416874] pnp 00:0a: [io  0x1060-0x107f]
Sep 26 20:23:05 Hilbert kernel: [    0.416876] pnp 00:0a: [io  0x1080-0x10bf]
Sep 26 20:23:05 Hilbert kernel: [    0.416878] pnp 00:0a: [io  0x10c0-0x10df]
Sep 26 20:23:05 Hilbert kernel: [    0.416884] pnp 00:0a: [io  0x1010-0x102f]
Sep 26 20:23:05 Hilbert kernel: [    0.416886] pnp 00:0a: [io  0x0809]
Sep 26 20:23:05 Hilbert kernel: [    0.416900] pnp 00:0a: disabling [io  0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
Sep 26 20:23:05 Hilbert kernel: [    0.416903] pnp 00:0a: disabling [io  0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
Sep 26 20:23:05 Hilbert kernel: [    0.416906] pnp 00:0a: disabling [io  0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
Sep 26 20:23:05 Hilbert kernel: [    0.416910] pnp 00:0a: disabling [io  0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
Sep 26 20:23:05 Hilbert kernel: [    0.416964] system 00:0a: [io  0xf400-0xf4fe] has been reserved
Sep 26 20:23:05 Hilbert kernel: [    0.416967] system 00:0a: [io  0x1080-0x10bf] has been reserved
Sep 26 20:23:05 Hilbert kernel: [    0.416970] system 00:0a: [io  0x10c0-0x10df] has been reserved
Sep 26 20:23:05 Hilbert kernel: [    0.416973] system 00:0a: [io  0x0809] has been reserved
Sep 26 20:23:05 Hilbert kernel: [    0.416976] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
Sep 26 20:23:05 Hilbert kernel: [    0.426546] pnp 00:0b: [mem 0x00000000-0x0009efff]
Sep 26 20:23:05 Hilbert kernel: [    0.426549] pnp 00:0b: [mem 0x0009f000-0x0009ffff]
Sep 26 20:23:05 Hilbert kernel: [    0.426551] pnp 00:0b: [mem 0x000c0000-0x000cffff]
Sep 26 20:23:05 Hilbert kernel: [    0.426554] pnp 00:0b: [mem 0x000e0000-0x000fffff]
Sep 26 20:23:05 Hilbert kernel: [    0.426556] pnp 00:0b: [mem 0x00100000-0x7fe6d7ff]
Sep 26 20:23:05 Hilbert kernel: [    0.426558] pnp 00:0b: [mem 0x7fe6d800-0x7fefffff]
Sep 26 20:23:05 Hilbert kernel: [    0.426560] pnp 00:0b: [mem 0x7ff00000-0x7fffffff]
Sep 26 20:23:05 Hilbert kernel: [    0.426562] pnp 00:0b: [mem 0x7ff00000-0x806fffff]
Sep 26 20:23:05 Hilbert kernel: [    0.426564] pnp 00:0b: [mem 0xfff00000-0xffffffff]
Sep 26 20:23:05 Hilbert kernel: [    0.426566] pnp 00:0b: [mem 0xffa00000-0xffafffff]
Sep 26 20:23:05 Hilbert kernel: [    0.426568] pnp 00:0b: [mem 0xfec00000-0xfec0ffff]
Sep 26 20:23:05 Hilbert kernel: [    0.426570] pnp 00:0b: [mem 0xfee00000-0xfee0ffff]
Sep 26 20:23:05 Hilbert kernel: [    0.426572] pnp 00:0b: [mem 0xfed20000-0xfed8ffff]
Sep 26 20:23:05 Hilbert kernel: [    0.426574] pnp 00:0b: [mem 0xfeda0000-0xfeda3fff]
Sep 26 20:23:05 Hilbert kernel: [    0.426576] pnp 00:0b: [mem 0xfeda4000-0xfeda4fff]
Sep 26 20:23:05 Hilbert kernel: [    0.426578] pnp 00:0b: [mem 0xfeda5000-0xfeda5fff]
Sep 26 20:23:05 Hilbert kernel: [    0.426580] pnp 00:0b: [mem 0xfeda6000-0xfeda6fff]
Sep 26 20:23:05 Hilbert kernel: [    0.426582] pnp 00:0b: [mem 0xfed18000-0xfed1bfff]
Sep 26 20:23:05 Hilbert kernel: [    0.426584] pnp 00:0b: [mem 0xf4000000-0xf7ffffff]
Sep 26 20:23:05 Hilbert kernel: [    0.426690] system 00:0b: [mem 0x00000000-0x0009efff] could not be reserved
Sep 26 20:23:05 Hilbert kernel: [    0.426694] system 00:0b: [mem 0x0009f000-0x0009ffff] could not be reserved
Sep 26 20:23:05 Hilbert kernel: [    0.426697] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
Sep 26 20:23:05 Hilbert kernel: [    0.426699] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
Sep 26 20:23:05 Hilbert kernel: [    0.426702] system 00:0b: [mem 0x00100000-0x7fe6d7ff] could not be reserved
Sep 26 20:23:05 Hilbert kernel: [    0.426705] system 00:0b: [mem 0x7fe6d800-0x7fefffff] has been reserved
Sep 26 20:23:05 Hilbert kernel: [    0.426708] system 00:0b: [mem 0x7ff00000-0x7fffffff] has been reserved
Sep 26 20:23:05 Hilbert kernel: [    0.426712] system 00:0b: [mem 0x7ff00000-0x806fffff] could not be reserved
Sep 26 20:23:05 Hilbert kernel: [    0.426715] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
Sep 26 20:23:05 Hilbert kernel: [    0.426718] system 00:0b: [mem 0xffa00000-0xffafffff] has been reserved
Sep 26 20:23:05 Hilbert kernel: [    0.426721] system 00:0b: [mem 0xfec00000-0xfec0ffff] could not be reserved
Sep 26 20:23:05 Hilbert kernel: [    0.426723] system 00:0b: [mem 0xfee00000-0xfee0ffff] has been reserved
Sep 26 20:23:05 Hilbert kernel: [    0.426726] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
Sep 26 20:23:05 Hilbert kernel: [    0.426729] system 00:0b: [mem 0xfeda0000-0xfeda3fff] has been reserved
Sep 26 20:23:05 Hilbert kernel: [    0.426732] system 00:0b: [mem 0xfeda4000-0xfeda4fff] has been reserved
Sep 26 20:23:05 Hilbert kernel: [    0.426734] system 00:0b: [mem 0xfeda5000-0xfeda5fff] has been reserved
Sep 26 20:23:05 Hilbert kernel: [    0.426737] system 00:0b: [mem 0xfeda6000-0xfeda6fff] has been reserved
Sep 26 20:23:05 Hilbert kernel: [    0.426740] system 00:0b: [mem 0xfed18000-0xfed1bfff] has been reserved
Sep 26 20:23:05 Hilbert kernel: [    0.426743] system 00:0b: [mem 0xf4000000-0xf7ffffff] has been reserved
Sep 26 20:23:05 Hilbert kernel: [    0.426746] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
Sep 26 20:23:05 Hilbert kernel: [    0.426800] pnp: PnP ACPI: found 12 devices
Sep 26 20:23:05 Hilbert kernel: [    0.426802] ACPI: ACPI bus type pnp unregistered
Sep 26 20:23:05 Hilbert kernel: [    0.432882] PCI: max bus depth: 1 pci_try_num: 2
Sep 26 20:23:05 Hilbert kernel: [    0.432944] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
Sep 26 20:23:05 Hilbert kernel: [    0.432949] pci 0000:00:1c.1: BAR 13: assigned [io  0x2000-0x2fff]
Sep 26 20:23:05 Hilbert kernel: [    0.432953] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80200000-0x803fffff]
Sep 26 20:23:05 Hilbert kernel: [    0.432957] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
Sep 26 20:23:05 Hilbert kernel: [    0.432960] pci 0000:00:1c.0: BAR 13: assigned [io  0x3000-0x3fff]
Sep 26 20:23:05 Hilbert kernel: [    0.432963] pci 0000:00:01.0: PCI bridge to [bus 01-01]
Sep 26 20:23:05 Hilbert kernel: [    0.432966] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
Sep 26 20:23:05 Hilbert kernel: [    0.432970] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfeafffff]
Sep 26 20:23:05 Hilbert kernel: [    0.432974] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
Sep 26 20:23:05 Hilbert kernel: [    0.432979] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
Sep 26 20:23:05 Hilbert kernel: [    0.432982] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
Sep 26 20:23:05 Hilbert kernel: [    0.432989] pci 0000:00:1c.0:   bridge window [mem 0x80200000-0x803fffff]
Sep 26 20:23:05 Hilbert kernel: [    0.432994] pci 0000:00:1c.0:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
Sep 26 20:23:05 Hilbert kernel: [    0.433002] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
Sep 26 20:23:05 Hilbert kernel: [    0.433006] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
Sep 26 20:23:05 Hilbert kernel: [    0.433012] pci 0000:00:1c.1:   bridge window [mem 0xf9f00000-0xf9ffffff]
Sep 26 20:23:05 Hilbert kernel: [    0.433018] pci 0000:00:1c.1:   bridge window [mem 0x80000000-0x801fffff 64bit pref]
Sep 26 20:23:05 Hilbert kernel: [    0.433026] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
Sep 26 20:23:05 Hilbert kernel: [    0.433029] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
Sep 26 20:23:05 Hilbert kernel: [    0.433036] pci 0000:00:1c.3:   bridge window [mem 0xf9c00000-0xf9efffff]
Sep 26 20:23:05 Hilbert kernel: [    0.433041] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
Sep 26 20:23:05 Hilbert kernel: [    0.433050] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
Sep 26 20:23:05 Hilbert kernel: [    0.433052] pci 0000:00:1e.0:   bridge window [io  disabled]
Sep 26 20:23:05 Hilbert kernel: [    0.433059] pci 0000:00:1e.0:   bridge window [mem 0xf9b00000-0xf9bfffff]
Sep 26 20:23:05 Hilbert kernel: [    0.433064] pci 0000:00:1e.0:   bridge window [mem pref disabled]
Sep 26 20:23:05 Hilbert kernel: [    0.433093] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep 26 20:23:05 Hilbert kernel: [    0.433098] pci 0000:00:01.0: setting latency timer to 64
Sep 26 20:23:05 Hilbert kernel: [    0.433106] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep 26 20:23:05 Hilbert kernel: [    0.433111] pci 0000:00:1c.0: setting latency timer to 64
Sep 26 20:23:05 Hilbert kernel: [    0.433122] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep 26 20:23:05 Hilbert kernel: [    0.433127] pci 0000:00:1c.1: setting latency timer to 64
Sep 26 20:23:05 Hilbert kernel: [    0.433138] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Sep 26 20:23:05 Hilbert kernel: [    0.433143] pci 0000:00:1c.3: setting latency timer to 64
Sep 26 20:23:05 Hilbert kernel: [    0.433152] pci 0000:00:1e.0: setting latency timer to 64
Sep 26 20:23:05 Hilbert kernel: [    0.433157] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
Sep 26 20:23:05 Hilbert kernel: [    0.433159] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
Sep 26 20:23:05 Hilbert kernel: [    0.433161] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
Sep 26 20:23:05 Hilbert kernel: [    0.433164] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfeafffff]
Sep 26 20:23:05 Hilbert kernel: [    0.433166] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
Sep 26 20:23:05 Hilbert kernel: [    0.433169] pci_bus 0000:0b: resource 0 [io  0x3000-0x3fff]
Sep 26 20:23:05 Hilbert kernel: [    0.433171] pci_bus 0000:0b: resource 1 [mem 0x80200000-0x803fffff]
Sep 26 20:23:05 Hilbert kernel: [    0.433173] pci_bus 0000:0b: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
Sep 26 20:23:05 Hilbert kernel: [    0.433176] pci_bus 0000:0c: resource 0 [io  0x2000-0x2fff]
Sep 26 20:23:05 Hilbert kernel: [    0.433178] pci_bus 0000:0c: resource 1 [mem 0xf9f00000-0xf9ffffff]
Sep 26 20:23:05 Hilbert kernel: [    0.433180] pci_bus 0000:0c: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
Sep 26 20:23:05 Hilbert kernel: [    0.433183] pci_bus 0000:0d: resource 0 [io  0xd000-0xdfff]
Sep 26 20:23:05 Hilbert kernel: [    0.433185] pci_bus 0000:0d: resource 1 [mem 0xf9c00000-0xf9efffff]
Sep 26 20:23:05 Hilbert kernel: [    0.433188] pci_bus 0000:0d: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
Sep 26 20:23:05 Hilbert kernel: [    0.433190] pci_bus 0000:03: resource 1 [mem 0xf9b00000-0xf9bfffff]
Sep 26 20:23:05 Hilbert kernel: [    0.433193] pci_bus 0000:03: resource 4 [io  0x0000-0xffff]
Sep 26 20:23:05 Hilbert kernel: [    0.433195] pci_bus 0000:03: resource 5 [mem 0x00000000-0xfffffffff]
Sep 26 20:23:05 Hilbert kernel: [    0.433236] NET: Registered protocol family 2
Sep 26 20:23:05 Hilbert kernel: [    0.433355] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
Sep 26 20:23:05 Hilbert kernel: [    0.434078] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
Sep 26 20:23:05 Hilbert kernel: [    0.436251] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Sep 26 20:23:05 Hilbert kernel: [    0.436839] TCP: Hash tables configured (established 262144 bind 65536)
Sep 26 20:23:05 Hilbert kernel: [    0.436841] TCP reno registered
Sep 26 20:23:05 Hilbert kernel: [    0.436850] UDP hash table entries: 1024 (order: 3, 32768 bytes)
Sep 26 20:23:05 Hilbert kernel: [    0.436872] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
Sep 26 20:23:05 Hilbert kernel: [    0.437016] NET: Registered protocol family 1
Sep 26 20:23:05 Hilbert kernel: [    0.437233] pci 0000:01:00.0: Boot video device
Sep 26 20:23:05 Hilbert kernel: [    0.437258] PCI: CLS 64 bytes, default 64
Sep 26 20:23:05 Hilbert kernel: [    0.437283] Simple Boot Flag at 0x79 set to 0x1
Sep 26 20:23:05 Hilbert kernel: [    0.437635] audit: initializing netlink socket (disabled)
Sep 26 20:23:05 Hilbert kernel: [    0.437648] type=2000 audit(1317061369.430:1): initialized
Sep 26 20:23:05 Hilbert kernel: [    0.465024] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Sep 26 20:23:05 Hilbert kernel: [    0.477626] VFS: Disk quotas dquot_6.5.2
Sep 26 20:23:05 Hilbert kernel: [    0.477687] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Sep 26 20:23:05 Hilbert kernel: [    0.478283] fuse init (API version 7.16)
Sep 26 20:23:05 Hilbert kernel: [    0.478367] msgmni has been set to 3982
Sep 26 20:23:05 Hilbert kernel: [    0.478695] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Sep 26 20:23:05 Hilbert kernel: [    0.478725] io scheduler noop registered
Sep 26 20:23:05 Hilbert kernel: [    0.478727] io scheduler deadline registered
Sep 26 20:23:05 Hilbert kernel: [    0.478764] io scheduler cfq registered (default)
Sep 26 20:23:05 Hilbert kernel: [    0.478881] pcieport 0000:00:01.0: setting latency timer to 64
Sep 26 20:23:05 Hilbert kernel: [    0.478917] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
Sep 26 20:23:05 Hilbert kernel: [    0.478966] pcieport 0000:00:1c.0: setting latency timer to 64
Sep 26 20:23:05 Hilbert kernel: [    0.479024] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
Sep 26 20:23:05 Hilbert kernel: [    0.479101] pcieport 0000:00:1c.1: setting latency timer to 64
Sep 26 20:23:05 Hilbert kernel: [    0.479158] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
Sep 26 20:23:05 Hilbert kernel: [    0.479238] pcieport 0000:00:1c.3: setting latency timer to 64
Sep 26 20:23:05 Hilbert kernel: [    0.479296] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
Sep 26 20:23:05 Hilbert kernel: [    0.479391] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Sep 26 20:23:05 Hilbert kernel: [    0.479413] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Sep 26 20:23:05 Hilbert kernel: [    0.479456] intel_idle: MWAIT substates: 0x22220
Sep 26 20:23:05 Hilbert kernel: [    0.479458] intel_idle: does not run on family 6 model 15
Sep 26 20:23:05 Hilbert kernel: [    0.479529] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
Sep 26 20:23:05 Hilbert kernel: [    0.479579] ACPI: AC Adapter [AC] (on-line)
Sep 26 20:23:05 Hilbert kernel: [    0.479648] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
Sep 26 20:23:05 Hilbert kernel: [    0.480183] ACPI: Lid Switch [LID]
Sep 26 20:23:05 Hilbert kernel: [    0.480227] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
Sep 26 20:23:05 Hilbert kernel: [    0.480232] ACPI: Power Button [PBTN]
Sep 26 20:23:05 Hilbert kernel: [    0.480272] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
Sep 26 20:23:05 Hilbert kernel: [    0.480275] ACPI: Sleep Button [SBTN]
Sep 26 20:23:05 Hilbert kernel: [    0.480300] ACPI: acpi_idle registered with cpuidle
Sep 26 20:23:05 Hilbert kernel: [    0.480445] Monitor-Mwait will be used to enter C-1 state
Sep 26 20:23:05 Hilbert kernel: [    0.480474] Monitor-Mwait will be used to enter C-2 state
Sep 26 20:23:05 Hilbert kernel: [    0.480499] Monitor-Mwait will be used to enter C-3 state
Sep 26 20:23:05 Hilbert kernel: [    0.480504] Marking TSC unstable due to TSC halts in idle
Sep 26 20:23:05 Hilbert kernel: [    0.505042] thermal LNXTHERM:00: registered as thermal_zone0
Sep 26 20:23:05 Hilbert kernel: [    0.505045] ACPI: Thermal Zone [THM] (84 C)
Sep 26 20:23:05 Hilbert kernel: [    0.505073] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
Sep 26 20:23:05 Hilbert kernel: [    0.520158] ERST: Table is not found!
Sep 26 20:23:05 Hilbert kernel: [    0.520245] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
Sep 26 20:23:05 Hilbert kernel: [    0.523659] ACPI: Battery Slot [BAT0] (battery present)
Sep 26 20:23:05 Hilbert kernel: [    0.640826] Freeing initrd memory: 13416k freed
Sep 26 20:23:05 Hilbert kernel: [    0.681522] Linux agpgart interface v0.103
Sep 26 20:23:05 Hilbert kernel: [    0.682756] brd: module loaded
Sep 26 20:23:05 Hilbert kernel: [    0.683265] loop: module loaded
Sep 26 20:23:05 Hilbert kernel: [    0.683411] ata_piix 0000:00:1f.1: version 2.13
Sep 26 20:23:05 Hilbert kernel: [    0.683426] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep 26 20:23:05 Hilbert kernel: [    0.683470] ata_piix 0000:00:1f.1: setting latency timer to 64
Sep 26 20:23:05 Hilbert kernel: [    0.683786] scsi0 : ata_piix
Sep 26 20:23:05 Hilbert kernel: [    0.683877] scsi1 : ata_piix
Sep 26 20:23:05 Hilbert kernel: [    0.684165] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
Sep 26 20:23:05 Hilbert kernel: [    0.684168] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
Sep 26 20:23:05 Hilbert kernel: [    0.684219] ata2: port disabled. ignoring.
Sep 26 20:23:05 Hilbert kernel: [    0.684477] Fixed MDIO Bus: probed
Sep 26 20:23:05 Hilbert kernel: [    0.684502] PPP generic driver version 2.4.2
Sep 26 20:23:05 Hilbert modem-manager[912]: <info>  ModemManager (version 0.5) starting...
Sep 26 20:23:05 Hilbert modem-manager[912]: <info>  Loaded plugin Gobi
Sep 26 20:23:05 Hilbert modem-manager[912]: <info>  Loaded plugin MotoC
Sep 26 20:23:05 Hilbert modem-manager[912]: <info>  Loaded plugin Huawei
Sep 26 20:23:05 Hilbert modem-manager[912]: <info>  Loaded plugin Linktop
Sep 26 20:23:05 Hilbert modem-manager[912]: <info>  Loaded plugin Nokia
Sep 26 20:23:05 Hilbert modem-manager[912]: <info>  Loaded plugin ZTE
Sep 26 20:23:05 Hilbert modem-manager[912]: <info>  Loaded plugin SimTech
Sep 26 20:23:05 Hilbert modem-manager[912]: <info>  Loaded plugin Option
Sep 26 20:23:05 Hilbert modem-manager[912]: <info>  Loaded plugin Longcheer
Sep 26 20:23:05 Hilbert modem-manager[912]: <info>  Loaded plugin Ericsson MBM
Sep 26 20:23:05 Hilbert modem-manager[912]: <info>  Loaded plugin Option High-Speed
Sep 26 20:23:05 Hilbert modem-manager[912]: <info>  Loaded plugin X22X
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> NetworkManager (version 0.9.1.90) is starting...
Sep 26 20:23:05 Hilbert modem-manager[912]: <info>  Loaded plugin Generic
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
Sep 26 20:23:05 Hilbert modem-manager[912]: <info>  Loaded plugin Novatel
Sep 26 20:23:05 Hilbert modem-manager[912]: <info>  Loaded plugin Samsung
Sep 26 20:23:05 Hilbert modem-manager[912]: <info>  Loaded plugin Sierra
Sep 26 20:23:05 Hilbert modem-manager[912]: <info>  Loaded plugin AnyData
Sep 26 20:23:05 Hilbert modem-manager[912]: <info>  Loaded plugin Wavecom
Sep 26 20:23:05 Hilbert kernel: [    0.684539] tun: Universal TUN/TAP device driver, 1.6
Sep 26 20:23:05 Hilbert kernel: [    0.684541] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Sep 26 20:23:05 Hilbert kernel: [    0.684616] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sep 26 20:23:05 Hilbert kernel: [    0.684641] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
Sep 26 20:23:05 Hilbert kernel: [    0.684655] ehci_hcd 0000:00:1a.7: setting latency timer to 64
Sep 26 20:23:05 Hilbert kernel: [    0.684659] ehci_hcd 0000:00:1a.7: EHCI Host Controller
Sep 26 20:23:05 Hilbert kernel: [    0.684692] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Sep 26 20:23:05 Hilbert kernel: [    0.684730] ehci_hcd 0000:00:1a.7: debug port 1
Sep 26 20:23:05 Hilbert kernel: [    0.688604] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
Sep 26 20:23:05 Hilbert kernel: [    0.688621] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
Sep 26 20:23:05 Hilbert kernel: [    0.710018] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
Sep 26 20:23:05 Hilbert kernel: [    0.710127] hub 1-0:1.0: USB hub found
Sep 26 20:23:05 Hilbert kernel: [    0.710132] hub 1-0:1.0: 4 ports detected
Sep 26 20:23:05 Hilbert kernel: [    0.710204] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Sep 26 20:23:05 Hilbert kernel: [    0.710217] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Sep 26 20:23:05 Hilbert kernel: [    0.710221] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Sep 26 20:23:05 Hilbert kernel: [    0.710260] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Sep 26 20:23:05 Hilbert kernel: [    0.710293] ehci_hcd 0000:00:1d.7: debug port 1
Sep 26 20:23:05 Hilbert kernel: [    0.714181] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
Sep 26 20:23:05 Hilbert kernel: [    0.714197] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
Sep 26 20:23:05 Hilbert kernel: [    0.730017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Sep 26 20:23:05 Hilbert kernel: [    0.730127] hub 2-0:1.0: USB hub found
Sep 26 20:23:05 Hilbert kernel: [    0.730131] hub 2-0:1.0: 6 ports detected
Sep 26 20:23:05 Hilbert kernel: [    0.730210] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Sep 26 20:23:05 Hilbert kernel: [    0.730222] uhci_hcd: USB Universal Host Controller Interface driver
Sep 26 20:23:05 Hilbert kernel: [    0.730246] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Sep 26 20:23:05 Hilbert kernel: [    0.730253] uhci_hcd 0000:00:1a.0: setting latency timer to 64
Sep 26 20:23:05 Hilbert kernel: [    0.730256] uhci_hcd 0000:00:1a.0: UHCI Host Controller
Sep 26 20:23:05 Hilbert kernel: [    0.730286] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Sep 26 20:23:05 Hilbert kernel: [    0.730316] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
Sep 26 20:23:05 Hilbert kernel: [    0.730426] hub 3-0:1.0: USB hub found
Sep 26 20:23:05 Hilbert kernel: [    0.730430] hub 3-0:1.0: 2 ports detected
Sep 26 20:23:05 Hilbert kernel: [    0.730498] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Sep 26 20:23:05 Hilbert kernel: [    0.730505] uhci_hcd 0000:00:1a.1: setting latency timer to 64
Sep 26 20:23:05 Hilbert kernel: [    0.730509] uhci_hcd 0000:00:1a.1: UHCI Host Controller
Sep 26 20:23:05 Hilbert kernel: [    0.730549] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Sep 26 20:23:05 Hilbert kernel: [    0.730590] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
Sep 26 20:23:05 Hilbert kernel: [    0.730702] hub 4-0:1.0: USB hub found
Sep 26 20:23:05 Hilbert kernel: [    0.730706] hub 4-0:1.0: 2 ports detected
Sep 26 20:23:05 Hilbert kernel: [    0.730769] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Sep 26 20:23:05 Hilbert kernel: [    0.730776] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Sep 26 20:23:05 Hilbert kernel: [    0.730779] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Sep 26 20:23:05 Hilbert kernel: [    0.730811] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
Sep 26 20:23:05 Hilbert kernel: [    0.730841] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
Sep 26 20:23:05 Hilbert kernel: [    0.730953] hub 5-0:1.0: USB hub found
Sep 26 20:23:05 Hilbert kernel: [    0.730957] hub 5-0:1.0: 2 ports detected
Sep 26 20:23:05 Hilbert kernel: [    0.731019] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Sep 26 20:23:05 Hilbert kernel: [    0.731026] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Sep 26 20:23:05 Hilbert kernel: [    0.731029] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Sep 26 20:23:05 Hilbert kernel: [    0.731059] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
Sep 26 20:23:05 Hilbert kernel: [    0.731088] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
Sep 26 20:23:05 Hilbert kernel: [    0.731201] hub 6-0:1.0: USB hub found
Sep 26 20:23:05 Hilbert kernel: [    0.731205] hub 6-0:1.0: 2 ports detected
Sep 26 20:23:05 Hilbert kernel: [    0.731268] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
Sep 26 20:23:05 Hilbert kernel: [    0.731274] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Sep 26 20:23:05 Hilbert kernel: [    0.731278] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Sep 26 20:23:05 Hilbert kernel: [    0.731313] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
Sep 26 20:23:05 Hilbert kernel: [    0.731342] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
Sep 26 20:23:05 Hilbert kernel: [    0.731451] hub 7-0:1.0: USB hub found
Sep 26 20:23:05 Hilbert kernel: [    0.731455] hub 7-0:1.0: 2 ports detected
Sep 26 20:23:05 Hilbert kernel: [    0.731558] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Sep 26 20:23:05 Hilbert kernel: [    0.734463] serio: i8042 KBD port at 0x60,0x64 irq 1
Sep 26 20:23:05 Hilbert kernel: [    0.734470] serio: i8042 AUX port at 0x60,0x64 irq 12
Sep 26 20:23:05 Hilbert kernel: [    0.734576] mousedev: PS/2 mouse device common for all mice
Sep 26 20:23:05 Hilbert kernel: [    0.734717] rtc_cmos 00:03: RTC can wake from S4
Sep 26 20:23:05 Hilbert kernel: [    0.734842] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Sep 26 20:23:05 Hilbert kernel: [    0.734875] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Sep 26 20:23:05 Hilbert kernel: [    0.734980] device-mapper: uevent: version 1.0.3
Sep 26 20:23:05 Hilbert kernel: [    0.735048] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
Sep 26 20:23:05 Hilbert kernel: [    0.735112] cpuidle: using governor ladder
Sep 26 20:23:05 Hilbert kernel: [    0.735195] cpuidle: using governor menu
Sep 26 20:23:05 Hilbert kernel: [    0.735198] EFI Variables Facility v0.08 2004-May-17
Sep 26 20:23:05 Hilbert kernel: [    0.735447] TCP cubic registered
Sep 26 20:23:05 Hilbert kernel: [    0.735569] NET: Registered protocol family 10
Sep 26 20:23:05 Hilbert kernel: [    0.736029] NET: Registered protocol family 17
Sep 26 20:23:05 Hilbert kernel: [    0.736046] Registering the dns_resolver key type
Sep 26 20:23:05 Hilbert kernel: [    0.736133] PM: Hibernation image not present or could not be loaded.
Sep 26 20:23:05 Hilbert kernel: [    0.736149] registered taskstats version 1
Sep 26 20:23:05 Hilbert kernel: [    0.743588] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Sep 26 20:23:05 Hilbert kernel: [    0.748808]   Magic number: 11:704:393
Sep 26 20:23:05 Hilbert kernel: [    0.748929] rtc_cmos 00:03: setting system clock to 2011-09-26 18:22:50 UTC (1317061370)
Sep 26 20:23:05 Hilbert kernel: [    0.749782] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Sep 26 20:23:05 Hilbert kernel: [    0.749784] EDD information not available.
Sep 26 20:23:05 Hilbert kernel: [    0.880539] ata1.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, D200, max UDMA/33
Sep 26 20:23:05 Hilbert kernel: [    0.920430] ata1.00: configured for UDMA/33
Sep 26 20:23:05 Hilbert kernel: [    0.926852] scsi 0:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-L632H D200 PQ: 0 ANSI: 5
Sep 26 20:23:05 Hilbert kernel: [    0.933964] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Sep 26 20:23:05 Hilbert kernel: [    0.933967] cdrom: Uniform CD-ROM driver Revision: 3.20
Sep 26 20:23:05 Hilbert kernel: [    0.934069] sr 0:0:0:0: Attached scsi CD-ROM sr0
Sep 26 20:23:05 Hilbert kernel: [    0.934125] sr 0:0:0:0: Attached scsi generic sg0 type 5
Sep 26 20:23:05 Hilbert kernel: [    0.935851] Freeing unused kernel memory: 984k freed
Sep 26 20:23:05 Hilbert kernel: [    0.936160] Write protecting the kernel read-only data: 10240k
Sep 26 20:23:05 Hilbert kernel: [    0.936430] Freeing unused kernel memory: 20k freed
Sep 26 20:23:05 Hilbert kernel: [    0.940986] Freeing unused kernel memory: 1400k freed
Sep 26 20:23:05 Hilbert kernel: [    1.051184] b44 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Sep 26 20:23:05 Hilbert kernel: [    1.055665] sdhci: Secure Digital Host Controller Interface driver
Sep 26 20:23:05 Hilbert kernel: [    1.055668] sdhci: Copyright(c) Pierre Ossman
Sep 26 20:23:05 Hilbert kernel: [    1.058683] ahci 0000:00:1f.2: version 3.0
Sep 26 20:23:05 Hilbert kernel: [    1.058700] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep 26 20:23:05 Hilbert kernel: [    1.058761] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
Sep 26 20:23:05 Hilbert kernel: [    1.058832] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
Sep 26 20:23:05 Hilbert kernel: [    1.058836] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems 
Sep 26 20:23:05 Hilbert kernel: [    1.058842] ahci 0000:00:1f.2: setting latency timer to 64
Sep 26 20:23:05 Hilbert kernel: [    1.071376] scsi2 : ahci
Sep 26 20:23:05 Hilbert kernel: [    1.071501] scsi3 : ahci
Sep 26 20:23:05 Hilbert kernel: [    1.071609] scsi4 : ahci
Sep 26 20:23:05 Hilbert kernel: [    1.071750] ata3: SATA max UDMA/133 abar m2048@0xfebfb800 port 0xfebfb900 irq 44
Sep 26 20:23:05 Hilbert kernel: [    1.071752] ata4: DUMMY
Sep 26 20:23:05 Hilbert kernel: [    1.071756] ata5: SATA max UDMA/133 abar m2048@0xfebfb800 port 0xfebfba00 irq 44
Sep 26 20:23:05 Hilbert kernel: [    1.090099] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
Sep 26 20:23:05 Hilbert kernel: [    1.090111] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
Sep 26 20:23:05 Hilbert kernel: [    1.090121] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
Sep 26 20:23:05 Hilbert kernel: [    1.150174] usb 2-6: new high speed USB device number 2 using ehci_hcd
Sep 26 20:23:05 Hilbert kernel: [    1.170167] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
Sep 26 20:23:05 Hilbert kernel: [    1.170213] firewire_ohci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Sep 26 20:23:05 Hilbert kernel: [    1.170300] b44: b44.c:v2.0
Sep 26 20:23:05 Hilbert kernel: [    1.210972] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:1d:09:a8:97:4c
Sep 26 20:23:05 Hilbert kernel: [    1.250234] firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
Sep 26 20:23:05 Hilbert kernel: [    1.250318] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22)
Sep 26 20:23:05 Hilbert kernel: [    1.250345] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
Sep 26 20:23:05 Hilbert kernel: [    1.251387] mmc0: no vmmc regulator found
Sep 26 20:23:05 Hilbert kernel: [    1.252415] Registered led device: mmc0::
Sep 26 20:23:05 Hilbert kernel: [    1.253460] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA
Sep 26 20:23:05 Hilbert kernel: [    1.410191] ata5: SATA link down (SStatus 0 SControl 300)
Sep 26 20:23:05 Hilbert kernel: [    1.410242] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Sep 26 20:23:05 Hilbert kernel: [    1.411760] ata3.00: ATA-7: ST9200420AS, 3.ADC, max UDMA/133
Sep 26 20:23:05 Hilbert kernel: [    1.411765] ata3.00: 390721968 sectors, multi 8: LBA48 NCQ (depth 31/32)
Sep 26 20:23:05 Hilbert kernel: [    1.412515] ata3.00: configured for UDMA/133
Sep 26 20:23:05 Hilbert kernel: [    1.412734] scsi 2:0:0:0: Direct-Access     ATA      ST9200420AS      3.AD PQ: 0 ANSI: 5
Sep 26 20:23:05 Hilbert kernel: [    1.412895] sd 2:0:0:0: Attached scsi generic sg1 type 0
Sep 26 20:23:05 Hilbert kernel: [    1.412914] sd 2:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
Sep 26 20:23:05 Hilbert kernel: [    1.412972] sd 2:0:0:0: [sda] Write Protect is off
Sep 26 20:23:05 Hilbert kernel: [    1.412975] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
Sep 26 20:23:05 Hilbert kernel: [    1.412998] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep 26 20:23:05 Hilbert kernel: [    1.485186]  sda: sda1 sda2 sda3 < sda5 >
Sep 26 20:23:05 Hilbert kernel: [    1.485707] sd 2:0:0:0: [sda] Attached SCSI disk
Sep 26 20:23:05 Hilbert kernel: [    1.590046] usb 3-2: new full speed USB device number 2 using uhci_hcd
Sep 26 20:23:05 Hilbert kernel: [    1.750167] firewire_core: created device fw0: GUID 484fc000188ba470, S400
Sep 26 20:23:05 Hilbert kernel: [    1.773480] hub 3-2:1.0: USB hub found
Sep 26 20:23:05 Hilbert kernel: [    1.775408] hub 3-2:1.0: 3 ports detected
Sep 26 20:23:05 Hilbert kernel: [    1.974664] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Sep 26 20:23:05 Hilbert kernel: [    2.071434] usb 3-2.1: new full speed USB device number 3 using uhci_hcd
Sep 26 20:23:05 Hilbert kernel: [    2.301446] usb 3-2.2: new full speed USB device number 4 using uhci_hcd
Sep 26 20:23:05 Hilbert kernel: [    2.521448] usb 3-2.3: new full speed USB device number 5 using uhci_hcd
Sep 26 20:23:05 Hilbert kernel: [   12.910219] lp: driver loaded but no devices found
Sep 26 20:23:05 Hilbert kernel: [   12.916673] Adding 1950716k swap on /dev/sda5.  Priority:-1 extents:1 across:1950716k 
Sep 26 20:23:05 Hilbert kernel: [   12.991287] cfg80211: Calling CRDA to update world regulatory domain
Sep 26 20:23:05 Hilbert kernel: [   13.043102] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
Sep 26 20:23:05 Hilbert kernel: [   13.043105] iwl3945: Copyright(c) 2003-2011 Intel Corporation
Sep 26 20:23:05 Hilbert kernel: [   13.043177] iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Sep 26 20:23:05 Hilbert kernel: [   13.043192] iwl3945 0000:0c:00.0: setting latency timer to 64
Sep 26 20:23:05 Hilbert kernel: [   13.069627] nvidia: module license 'NVIDIA' taints kernel.
Sep 26 20:23:05 Hilbert kernel: [   13.069632] Disabling lock debugging due to kernel taint
Sep 26 20:23:05 Hilbert kernel: [   13.259784] r852 0000:03:01.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
Sep 26 20:23:05 Hilbert kernel: [   13.265096] r852: driver loaded successfully
Sep 26 20:23:05 Hilbert kernel: [   13.279363] Bluetooth: Core ver 2.16
Sep 26 20:23:05 Hilbert kernel: [   13.279553] NET: Registered protocol family 31
Sep 26 20:23:05 Hilbert kernel: [   13.279555] Bluetooth: HCI device and connection manager initialized
Sep 26 20:23:05 Hilbert kernel: [   13.279558] Bluetooth: HCI socket layer initialized
Sep 26 20:23:05 Hilbert kernel: [   13.279560] Bluetooth: L2CAP socket layer initialized
Sep 26 20:23:05 Hilbert kernel: [   13.279787] wmi: Mapper loaded
Sep 26 20:23:05 Hilbert kernel: [   13.284604] Bluetooth: SCO socket layer initialized
Sep 26 20:23:05 Hilbert kernel: [   13.287165] acpi device:31: registered as cooling_device2
Sep 26 20:23:05 Hilbert kernel: [   13.293414] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2e/LNXVIDEO:00/input/input4
Sep 26 20:23:05 Hilbert kernel: [   13.294151] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
Sep 26 20:23:05 Hilbert kernel: [   13.294202] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
Sep 26 20:23:05 Hilbert kernel: [   13.300067] Bluetooth: Generic Bluetooth USB driver ver 0.6
Sep 26 20:23:05 Hilbert kernel: [   13.307191] usbcore: registered new interface driver btusb
Sep 26 20:23:05 Hilbert kernel: [   13.433124] iwl3945 0000:0c:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
Sep 26 20:23:05 Hilbert kernel: [   13.433128] iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG
Sep 26 20:23:05 Hilbert kernel: [   13.433279] iwl3945 0000:0c:00.0: irq 45 for MSI/MSI-X
Sep 26 20:23:05 Hilbert kernel: [   13.433388] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
Sep 26 20:23:05 Hilbert kernel: [   13.437529] Registered led device: phy0-led
Sep 26 20:23:05 Hilbert kernel: [   13.437575] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
Sep 26 20:23:05 Hilbert kernel: [   13.449043] type=1400 audit(1317061383.182:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=653 comm="apparmor_parser"
Sep 26 20:23:05 Hilbert kernel: [   13.449298] type=1400 audit(1317061383.182:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=653 comm="apparmor_parser"
Sep 26 20:23:05 Hilbert kernel: [   13.449465] type=1400 audit(1317061383.182:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=653 comm="apparmor_parser"
Sep 26 20:23:05 Hilbert kernel: [   13.451098] type=1400 audit(1317061383.192:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=657 comm="apparmor_parser"
Sep 26 20:23:05 Hilbert kernel: [   13.451351] type=1400 audit(1317061383.192:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=657 comm="apparmor_parser"
Sep 26 20:23:05 Hilbert kernel: [   13.451516] type=1400 audit(1317061383.192:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=657 comm="apparmor_parser"
Sep 26 20:23:05 Hilbert kernel: [   13.500594] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
Sep 26 20:23:05 Hilbert kernel: [   13.609349] Linux video capture interface: v2.00
Sep 26 20:23:05 Hilbert kernel: [   13.615937] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640)
Sep 26 20:23:05 Hilbert kernel: [   13.618999] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Sep 26 20:23:05 Hilbert kernel: [   13.619066] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
Sep 26 20:23:05 Hilbert kernel: [   13.619096] HDA Intel 0000:00:1b.0: setting latency timer to 64
Sep 26 20:23:05 Hilbert kernel: [   13.619562] input: Dell WMI hotkeys as /devices/virtual/input/input5
Sep 26 20:23:05 Hilbert kernel: [   13.625740] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
Sep 26 20:23:05 Hilbert kernel: [   13.630411] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input6
Sep 26 20:23:05 Hilbert kernel: [   13.630589] generic-usb 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
Sep 26 20:23:05 Hilbert kernel: [   13.630873] input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input7
Sep 26 20:23:05 Hilbert kernel: [   13.631156] usbcore: registered new interface driver uvcvideo
Sep 26 20:23:05 Hilbert kernel: [   13.631159] USB Video Class driver (v1.1.0)
Sep 26 20:23:05 Hilbert kernel: [   13.636402] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input8
Sep 26 20:23:05 Hilbert kernel: [   13.636579] generic-usb 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
Sep 26 20:23:05 Hilbert kernel: [   13.636619] usbcore: registered new interface driver usbhid
Sep 26 20:23:05 Hilbert kernel: [   13.636621] usbhid: USB HID core driver
Sep 26 20:23:05 Hilbert kernel: [   13.724980] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
Sep 26 20:23:05 Hilbert kernel: [   13.724984] cfg80211: World regulatory domain updated:
Sep 26 20:23:05 Hilbert kernel: [   13.724986] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Sep 26 20:23:05 Hilbert kernel: [   13.724989] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 26 20:23:05 Hilbert kernel: [   13.724992] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep 26 20:23:05 Hilbert kernel: [   13.724995] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep 26 20:23:05 Hilbert kernel: [   13.724998] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 26 20:23:05 Hilbert kernel: [   13.725000] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 26 20:23:05 Hilbert kernel: [   13.852122] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
Sep 26 20:23:05 Hilbert kernel: [   13.852316] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
Sep 26 20:23:05 Hilbert kernel: [   13.989272] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep 26 20:23:05 Hilbert kernel: [   13.989283] nvidia 0000:01:00.0: setting latency timer to 64
Sep 26 20:23:05 Hilbert kernel: [   13.989289] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
Sep 26 20:23:05 Hilbert kernel: [   13.989420] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  280.13  Wed Jul 27 16:53:56 PDT 2011
Sep 26 20:23:05 Hilbert kernel: [   14.030276] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
Sep 26 20:23:05 Hilbert kernel: [   14.157735] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04793/0x300000/0x0
Sep 26 20:23:05 Hilbert kernel: [   14.157744] serio: Synaptics pass-through port at isa0060/serio1/input0
Sep 26 20:23:05 Hilbert kernel: [   14.195652] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
Sep 26 20:23:05 Hilbert kernel: [   14.310698] init: udev-fallback-graphics main process (844) terminated with status 1
Sep 26 20:23:05 Hilbert kernel: [   14.403828] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Sep 26 20:23:05 Hilbert kernel: [   15.808345] ppdev: user-space parallel port driver
Sep 26 20:23:05 Hilbert kernel: [   15.818804] type=1400 audit(1317061385.552:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=929 comm="apparmor_parser"
Sep 26 20:23:05 Hilbert kernel: [   15.821064] type=1400 audit(1317061385.562:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=929 comm="apparmor_parser"
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> VPN: loaded org.freedesktop.NetworkManager.pptp
Sep 26 20:23:05 Hilbert NetworkManager[915]:    SCPlugin-Ifupdown: init!
Sep 26 20:23:05 Hilbert NetworkManager[915]:    SCPlugin-Ifupdown: update_system_hostname
Sep 26 20:23:05 Hilbert NetworkManager[915]:    SCPluginIfupdown: management mode: unmanaged
Sep 26 20:23:05 Hilbert NetworkManager[915]:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/net/wlan0, iface: wlan0)
Sep 26 20:23:05 Hilbert NetworkManager[915]:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/net/wlan0, iface: wlan0): no ifupdown configuration found.
Sep 26 20:23:05 Hilbert NetworkManager[915]:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1e.0/0000:03:00.0/ssb0:0/net/eth0, iface: eth0)
Sep 26 20:23:05 Hilbert NetworkManager[915]:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1e.0/0000:03:00.0/ssb0:0/net/eth0, iface: eth0): no ifupdown configuration found.
Sep 26 20:23:05 Hilbert NetworkManager[915]:    SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo)
Sep 26 20:23:05 Hilbert NetworkManager[915]:    SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found.
Sep 26 20:23:05 Hilbert NetworkManager[915]:    SCPlugin-Ifupdown: end _init.
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> Loaded plugin ifupdown: (C) 2008 Canonical Ltd.  To report bugs please use the NetworkManager mailing list.
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
Sep 26 20:23:05 Hilbert NetworkManager[915]:    Ifupdown: get unmanaged devices count: 0
Sep 26 20:23:05 Hilbert NetworkManager[915]:    SCPlugin-Ifupdown: (17069872) ... get_connections.
Sep 26 20:23:05 Hilbert NetworkManager[915]:    SCPlugin-Ifupdown: (17069872) ... get_connections (managed=false): return empty list.
Sep 26 20:23:05 Hilbert NetworkManager[915]:    keyfile: parsing Condivisa ... 
Sep 26 20:23:05 Hilbert NetworkManager[915]:    keyfile:     read connection 'Condivisa'
Sep 26 20:23:05 Hilbert NetworkManager[915]:    keyfile: parsing Alice-37768910 ... 
Sep 26 20:23:05 Hilbert NetworkManager[915]:    keyfile:     read connection 'Alice-37768910'
Sep 26 20:23:05 Hilbert NetworkManager[915]:    keyfile: parsing Cavo ... 
Sep 26 20:23:05 Hilbert NetworkManager[915]:    keyfile:     read connection 'Cavo'
Sep 26 20:23:05 Hilbert NetworkManager[915]:    Ifupdown: get unmanaged devices count: 0
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> modem-manager is now available
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> monitoring kernel firmware directory '/lib/firmware'.
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> found WiFi radio killswitch rfkill1 (at /sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/ieee80211/phy0/rfkill1) (driver (unknown))
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> found WiFi radio killswitch rfkill2 (at /sys/devices/platform/dell-laptop/rfkill/rfkill2) (driver dell-laptop)
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> WiFi enabled by radio killswitch; enabled by state file
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> WWAN enabled by radio killswitch; enabled by state file
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> WiMAX enabled by radio killswitch; enabled by state file
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> Networking is enabled by state file
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> (wlan0): driver supports SSID scans (scan_capa 0x01).
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> (wlan0): new 802.11 WiFi device (driver: 'iwl3945' ifindex: 3)
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/0
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> (wlan0): now managed
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> (wlan0): bringing up device.
Sep 26 20:23:05 Hilbert kernel: [   15.884926] iwl3945 0000:0c:00.0: loaded firmware version 15.32.2.9
Sep 26 20:23:05 Hilbert kernel: [   15.898311] type=1400 audit(1317061385.632:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=945 comm="apparmor_parser"
Sep 26 20:23:05 Hilbert kernel: [   15.898581] type=1400 audit(1317061385.632:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=945 comm="apparmor_parser"
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> (wlan0): preparing device.
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> (wlan0): deactivating device (reason 'managed') [2]
Sep 26 20:23:05 Hilbert kernel: [   15.952042] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> (eth0): carrier is OFF
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> (eth0): new Ethernet device (driver: 'b44' ifindex: 2)
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> (eth0): exported as /org/freedesktop/NetworkManager/Devices/1
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> (eth0): now managed
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> (eth0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> (eth0): bringing up device.
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> (eth0): preparing device.
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> (eth0): deactivating device (reason 'managed') [2]
Sep 26 20:23:05 Hilbert NetworkManager[915]: <warn> bluez error getting default adapter: The name org.bluez was not provided by any .service files
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> wpa_supplicant started
Sep 26 20:23:05 Hilbert kernel: [   15.960631] ADDRCONF(NETDEV_UP): eth0: link is not ready
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> (wlan0): supplicant interface state: starting -> ready
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Sep 26 20:23:05 Hilbert NetworkManager[915]: <info> (wlan0): supplicant interface state: ready -> inactive
Sep 26 20:23:06 Hilbert kernel: [   16.484501] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Sep 26 20:23:06 Hilbert kernel: [   16.484504] Bluetooth: BNEP filters: protocol multicast
Sep 26 20:23:06 Hilbert kernel: [   16.485652] Bluetooth: RFCOMM TTY layer initialized
Sep 26 20:23:06 Hilbert kernel: [   16.485657] Bluetooth: RFCOMM socket layer initialized
Sep 26 20:23:06 Hilbert kernel: [   16.485659] Bluetooth: RFCOMM ver 1.11
Sep 26 20:23:06 Hilbert NetworkManager[915]: <warn> bluez error getting default adapter: No such adapter
Sep 26 20:23:06 Hilbert kernel: [   16.987960] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
Sep 26 20:23:06 Hilbert kernel: [   17.074106] EXT4-fs (sda2): re-mounted. Opts: commit=0
Sep 26 20:23:10 Hilbert kernel: [   20.391641] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
Sep 26 20:23:10 Hilbert kernel: [   20.631716] EXT4-fs (sda2): re-mounted. Opts: commit=0
Sep 26 20:23:10 Hilbert NetworkManager[915]: <info> Auto-activating connection 'Alice-37768910'.
Sep 26 20:23:10 Hilbert NetworkManager[915]: <info> Activation (wlan0) starting connection 'Alice-37768910'
Sep 26 20:23:10 Hilbert NetworkManager[915]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Sep 26 20:23:10 Hilbert NetworkManager[915]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Sep 26 20:23:10 Hilbert NetworkManager[915]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Sep 26 20:23:10 Hilbert NetworkManager[915]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Sep 26 20:23:10 Hilbert NetworkManager[915]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Sep 26 20:23:10 Hilbert NetworkManager[915]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Sep 26 20:23:10 Hilbert NetworkManager[915]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Sep 26 20:23:10 Hilbert NetworkManager[915]: <info> Activation (wlan0/wireless): connection 'Alice-37768910' has security, and secrets exist.  No new secrets needed.
Sep 26 20:23:10 Hilbert NetworkManager[915]: <info> Config: added 'ssid' value 'Alice-37768910'
Sep 26 20:23:10 Hilbert NetworkManager[915]: <info> Config: added 'scan_ssid' value '1'
Sep 26 20:23:10 Hilbert NetworkManager[915]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Sep 26 20:23:10 Hilbert NetworkManager[915]: <info> Config: added 'psk' value '<omitted>'
Sep 26 20:23:10 Hilbert NetworkManager[915]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Sep 26 20:23:10 Hilbert NetworkManager[915]: <info> Config: set interface ap_scan to 1
Sep 26 20:23:10 Hilbert NetworkManager[915]: <info> (wlan0): supplicant interface state: inactive -> scanning
Sep 26 20:23:14 Hilbert wpa_supplicant[993]: Trying to authenticate with 00:23:8e:4b:11:70 (SSID='Alice-37768910' freq=2412 MHz)
Sep 26 20:23:14 Hilbert wpa_supplicant[993]: Trying to associate with 00:23:8e:4b:11:70 (SSID='Alice-37768910' freq=2412 MHz)
Sep 26 20:23:14 Hilbert NetworkManager[915]: <info> (wlan0): supplicant interface state: scanning -> associating
Sep 26 20:23:14 Hilbert kernel: [   24.322399] wlan0: authenticate with 00:23:8e:4b:11:70 (try 1)
Sep 26 20:23:14 Hilbert kernel: [   24.324241] wlan0: authenticated
Sep 26 20:23:14 Hilbert kernel: [   24.324426] wlan0: associate with 00:23:8e:4b:11:70 (try 1)
Sep 26 20:23:14 Hilbert kernel: [   24.326873] wlan0: RX AssocResp from 00:23:8e:4b:11:70 (capab=0x411 status=0 aid=1)
Sep 26 20:23:14 Hilbert kernel: [   24.326880] wlan0: associated
Sep 26 20:23:14 Hilbert wpa_supplicant[993]: Associated with 00:23:8e:4b:11:70
Sep 26 20:23:14 Hilbert NetworkManager[915]: <info> (wlan0): supplicant interface state: associating -> 4-way handshake
Sep 26 20:23:14 Hilbert kernel: [   24.330204] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sep 26 20:23:14 Hilbert wpa_supplicant[993]: WPA: Key negotiation completed with 00:23:8e:4b:11:70 [PTK=TKIP GTK=TKIP]
Sep 26 20:23:14 Hilbert wpa_supplicant[993]: CTRL-EVENT-CONNECTED - Connection to 00:23:8e:4b:11:70 completed (auth) [id=0 id_str=]
Sep 26 20:23:14 Hilbert NetworkManager[915]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Sep 26 20:23:14 Hilbert NetworkManager[915]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful.  Connected to wireless network 'Alice-37768910'.
Sep 26 20:23:14 Hilbert NetworkManager[915]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Sep 26 20:23:14 Hilbert NetworkManager[915]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Sep 26 20:23:14 Hilbert NetworkManager[915]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
Sep 26 20:23:14 Hilbert NetworkManager[915]: <info> Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Sep 26 20:23:14 Hilbert NetworkManager[915]: <info> dhclient started with pid 1509
Sep 26 20:23:14 Hilbert NetworkManager[915]: <info> Activation (wlan0) Beginning IP6 addrconf.
Sep 26 20:23:14 Hilbert NetworkManager[915]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Sep 26 20:23:14 Hilbert dhclient: Internet Systems Consortium DHCP Client 4.1.1-P1
Sep 26 20:23:14 Hilbert dhclient: Copyright 2004-2010 Internet Systems Consortium.
Sep 26 20:23:14 Hilbert dhclient: All rights reserved.
Sep 26 20:23:14 Hilbert dhclient: For info, please visit https://www.isc.org/software/dhcp/
Sep 26 20:23:14 Hilbert dhclient: 
Sep 26 20:23:14 Hilbert NetworkManager[915]: <info> (wlan0): DHCPv4 state changed nbi -> preinit
Sep 26 20:23:14 Hilbert dhclient: Listening on LPF/wlan0/00:1c:bf:61:5f:35
Sep 26 20:23:14 Hilbert dhclient: Sending on   LPF/wlan0/00:1c:bf:61:5f:35
Sep 26 20:23:14 Hilbert dhclient: Sending on   Socket/fallback
Sep 26 20:23:14 Hilbert dhclient: DHCPREQUEST of 192.168.1.170 on wlan0 to 255.255.255.255 port 67
Sep 26 20:23:14 Hilbert dhclient: DHCPNAK from 192.168.1.1
Sep 26 20:23:14 Hilbert NetworkManager[915]: <info> (wlan0): DHCPv4 state changed preinit -> expire
Sep 26 20:23:14 Hilbert dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 3
Sep 26 20:23:14 Hilbert NetworkManager[915]: <info> (wlan0): DHCPv4 state changed expire -> preinit
Sep 26 20:23:16 Hilbert dhclient: DHCPOFFER of 192.168.1.170 from 192.168.1.1
Sep 26 20:23:16 Hilbert dhclient: DHCPREQUEST of 192.168.1.170 on wlan0 to 255.255.255.255 port 67
Sep 26 20:23:16 Hilbert dhclient: DHCPACK of 192.168.1.170 from 192.168.1.1
Sep 26 20:23:16 Hilbert dhclient: bound to 192.168.1.170 -- renewal in 8443 seconds.
Sep 26 20:23:16 Hilbert NetworkManager[915]: <info> (wlan0): DHCPv4 state changed preinit -> bound
Sep 26 20:23:16 Hilbert NetworkManager[915]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Sep 26 20:23:16 Hilbert NetworkManager[915]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started...
Sep 26 20:23:16 Hilbert NetworkManager[915]: <info>   address 192.168.1.170
Sep 26 20:23:16 Hilbert NetworkManager[915]: <info>   prefix 24 (255.255.255.0)
Sep 26 20:23:16 Hilbert NetworkManager[915]: <info>   gateway 192.168.1.1
Sep 26 20:23:16 Hilbert NetworkManager[915]: <info>   hostname 'Hilbert'
Sep 26 20:23:16 Hilbert NetworkManager[915]: <info>   nameserver '192.168.1.1'
Sep 26 20:23:16 Hilbert NetworkManager[915]: <info>   domain name 'homenet.telecomitalia.it'
Sep 26 20:23:16 Hilbert NetworkManager[915]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
Sep 26 20:23:17 Hilbert NetworkManager[915]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Sep 26 20:23:17 Hilbert NetworkManager[915]: <info> Policy set 'Alice-37768910' (wlan0) as default for IPv4 routing and DNS.
Sep 26 20:23:17 Hilbert NetworkManager[915]: <info> Activation (wlan0) successful, device activated.
Sep 26 20:23:17 Hilbert NetworkManager[915]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
Sep 26 20:23:17 Hilbert NetworkManager[915]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete.
Sep 26 20:23:24 Hilbert kernel: [   34.450023] wlan0: no IPv6 routers present
Sep 26 20:23:34 Hilbert NetworkManager[915]: <info> (wlan0): IP6 addrconf timed out or failed.
Sep 26 20:23:34 Hilbert NetworkManager[915]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) scheduled...
Sep 26 20:23:34 Hilbert NetworkManager[915]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) started...
Sep 26 20:23:34 Hilbert NetworkManager[915]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
Sep 26 20:23:34 Hilbert NetworkManager[915]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
Sep 26 20:23:34 Hilbert NetworkManager[915]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) complete.
Sep 26 20:23:59 Hilbert kernel: [   69.400068] CE: hpet increased min_delta_ns to 20113 nsec