[ 0.000000] Linux version 2.6.20-8-generic (root@yellow) (gcc version 4.1.2 20070129 (prerelease) (Ubuntu 4.1.1-31ubuntu2)) #2 SMP Tue Feb 13 01:14:41 UTC 2007 (Ubuntu 2.6.20-8.14-generic) [ 0.000000] Command line: root=UUID=c1ab12a0-08f4-49ab-81c1-fdff4aab948f ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) [ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524000) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.2 present. [ 0.000000] ACPI: RSDP (v000 IntelR ) @ 0x00000000000f7330 [ 0.000000] ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fee3040 [ 0.000000] ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fee30c0 [ 0.000000] ACPI: MCFG (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fee7b40 [ 0.000000] ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fee7a40 [ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20041203) @ 0x000000007fee7bc0 [ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20041203) @ 0x000000007fee8050 [ 0.000000] ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007fee0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524000) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000007fee0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 524000 [ 0.000000] On node 0 totalpages: 523903 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1074 pages reserved [ 0.000000] DMA zone: 2869 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7108 pages used for memmap [ 0.000000] DMA32 zone: 512796 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000f0000 [ 0.000000] Nosave address range: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000) [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 515665 [ 0.000000] Kernel command line: root=UUID=c1ab12a0-08f4-49ab-81c1-fdff4aab948f ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 20.877335] Console: colour VGA+ 80x25 [ 20.878332] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 20.879182] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 20.879305] Checking aperture... [ 20.879313] Calgary: detecting Calgary via BIOS EBDA area [ 20.879315] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 20.899201] Memory: 2051480k/2096000k available (2196k kernel code, 44132k reserved, 1138k data, 300k init) [ 20.978089] Calibrating delay using timer specific routine.. 4900.55 BogoMIPS (lpj=9801100) [ 20.978133] Security Framework v1.0.0 initialized [ 20.978138] SELinux: Disabled at boot. [ 20.978157] Mount-cache hash table entries: 256 [ 20.978284] CPU: L1 I cache: 32K, L1 D cache: 32K [ 20.978286] CPU: L3 cache: 4096K [ 20.978288] CPU 0/0 -> Node 0 [ 20.978290] using mwait in idle threads. [ 20.978291] CPU: Physical Processor ID: 0 [ 20.978292] CPU: Processor Core ID: 0 [ 20.978298] CPU0: Thermal monitoring enabled (TM1) [ 20.978307] SMP alternatives: switching to UP code [ 20.978450] ACPI: Core revision 20060707 [ 21.028708] activating NMI Watchdog ... done. [ 21.028714] Using local APIC timer interrupts. [ 21.069536] result 17003226 [ 21.069537] Detected 17.003 MHz APIC timer. [ 21.070168] SMP alternatives: switching to SMP code [ 21.070189] Booting processor 1/2 APIC 0x1 [ 21.081167] Initializing CPU#1 [ 21.157996] Calibrating delay using timer specific routine.. 4897.16 BogoMIPS (lpj=9794322) [ 21.158002] CPU: L1 I cache: 32K, L1 D cache: 32K [ 21.158004] CPU: L3 cache: 4096K [ 21.158005] CPU 1/1 -> Node 0 [ 21.158007] CPU: Physical Processor ID: 0 [ 21.158008] CPU: Processor Core ID: 0 [ 21.158012] CPU1: Thermal monitoring enabled (TM2) [ 21.158418] Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 [ 21.162022] Brought up 2 CPUs [ 21.162060] testing NMI watchdog ... OK. [ 21.202074] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. [ 21.202076] time.c: Detected 2448.464 MHz processor. [ 21.314952] migration_cost=22 [ 21.315186] NET: Registered protocol family 16 [ 21.315244] ACPI: bus type pci registered [ 21.317183] PCI: Using MMCONFIG at e0000000 [ 21.317543] mtrr: your CPUs had inconsistent variable MTRR settings [ 21.317545] mtrr: probably your BIOS does not setup all CPUs. [ 21.317546] mtrr: corrected configuration. [ 21.326466] ACPI: Interpreter enabled [ 21.326468] ACPI: Using IOAPIC for interrupt routing [ 21.326916] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 21.326919] PCI: Probing PCI hardware (bus 00) [ 21.327366] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 21.327369] PCI quirk: region 0480-04bf claimed by ICH6 GPIO [ 21.327688] Boot video device is 0000:04:00.0 [ 21.328201] PCI: Transparent bridge - 0000:00:1e.0 [ 21.328247] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 21.341420] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 21.341597] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 21.341768] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 21.341945] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 21.342115] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 21.342380] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 21.344912] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 *7 9 10 11 12 14 15) [ 21.345113] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 9 *10 11 12 14 15) [ 21.345310] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 *5 7 9 10 11 12 14 15) [ 21.345507] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 9 10 *11 12 14 15) [ 21.345702] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 9 10 11 12 14 15) *0, disabled. [ 21.345911] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 9 10 11 12 14 15) *0, disabled. [ 21.346124] ACPI: PCI Interrupt Link [LNK0] (IRQs 4 5 7 9 10 11 12 14 15) *0, disabled. [ 21.346322] ACPI: PCI Interrupt Link [LNK1] (IRQs *4 5 7 9 10 11 12 14 15) [ 21.346521] Linux Plug and Play Support v0.97 (c) Adam Belay [ 21.346529] pnp: PnP ACPI init [ 21.348872] pnp: PnP ACPI: found 14 devices [ 21.348907] PCI: Using ACPI for IRQ routing [ 21.348909] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 21.348992] PCI-GART: No AMD northbridge found. [ 21.349288] pnp: 00:09: ioport range 0x400-0x4bf could not be reserved [ 21.349507] PCI: Bridge: 0000:02:00.0 [ 21.349509] IO window: c000-cfff [ 21.349512] MEM window: f9000000-fbffffff [ 21.349515] PREFETCH window: c0000000-cfffffff [ 21.349518] PCI: Bridge: 0000:02:01.0 [ 21.349519] IO window: b000-bfff [ 21.349522] MEM window: f6000000-f8ffffff [ 21.349524] PREFETCH window: b0000000-bfffffff [ 21.349527] PCI: Bridge: 0000:01:00.0 [ 21.349529] IO window: b000-cfff [ 21.349531] MEM window: f6000000-fbffffff [ 21.349534] PREFETCH window: b0000000-cfffffff [ 21.349536] PCI: Bridge: 0000:00:01.0 [ 21.349537] IO window: b000-cfff [ 21.349539] MEM window: f6000000-fcffffff [ 21.349541] PREFETCH window: b0000000-cfffffff [ 21.349543] PCI: Bridge: 0000:00:1c.0 [ 21.349544] IO window: a000-afff [ 21.349547] MEM window: fd600000-fd6fffff [ 21.349549] PREFETCH window: fd300000-fd3fffff [ 21.349552] PCI: Bridge: 0000:00:1c.1 [ 21.349554] IO window: 9000-9fff [ 21.349557] MEM window: fde00000-fdefffff [ 21.349559] PREFETCH window: fdd00000-fddfffff [ 21.349562] PCI: Bridge: 0000:00:1c.2 [ 21.349564] IO window: 8000-8fff [ 21.349567] MEM window: fdc00000-fdcfffff [ 21.349569] PREFETCH window: fdb00000-fdbfffff [ 21.349572] PCI: Bridge: 0000:00:1c.3 [ 21.349574] IO window: e000-efff [ 21.349577] MEM window: fda00000-fdafffff [ 21.349579] PREFETCH window: fd900000-fd9fffff [ 21.349582] PCI: Bridge: 0000:00:1c.4 [ 21.349584] IO window: d000-dfff [ 21.349586] MEM window: fd800000-fd8fffff [ 21.349589] PREFETCH window: fd700000-fd7fffff [ 21.349591] PCI: Bridge: 0000:00:1e.0 [ 21.349593] IO window: 7000-7fff [ 21.349596] MEM window: fd500000-fd5fffff [ 21.349598] PREFETCH window: fd400000-fd4fffff [ 21.349605] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 21.349608] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 21.349614] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 21.349621] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 21.349627] PCI: Setting latency timer of device 0000:02:01.0 to 64 [ 21.349636] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 21.349640] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 21.349649] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 21.349652] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 21.349662] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 21.349665] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 21.349675] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 21.349678] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 21.349687] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 [ 21.349690] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 21.349696] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 21.349721] NET: Registered protocol family 2 [ 21.393916] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 21.394060] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 21.395666] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 21.396139] TCP: Hash tables configured (established 262144 bind 65536) [ 21.396142] TCP reno registered [ 21.410010] checking if image is initramfs... it is [ 21.981940] Freeing initrd memory: 7854k freed [ 21.985227] audit: initializing netlink socket (disabled) [ 21.985240] audit(1171832632.072:1): initialized [ 21.985369] VFS: Disk quotas dquot_6.5.1 [ 21.985382] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 21.985420] io scheduler noop registered [ 21.985422] io scheduler anticipatory registered [ 21.985424] io scheduler deadline registered [ 21.985434] io scheduler cfq registered (default) [ 21.985670] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 21.985680] assign_interrupt_mode Found MSI capability [ 21.985698] Allocate Port Service[0000:00:01.0:pcie00] [ 21.985723] Allocate Port Service[0000:00:01.0:pcie03] [ 21.985762] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 21.985784] assign_interrupt_mode Found MSI capability [ 21.985801] Allocate Port Service[0000:00:1c.0:pcie00] [ 21.985823] Allocate Port Service[0000:00:1c.0:pcie02] [ 21.985846] Allocate Port Service[0000:00:1c.0:pcie03] [ 21.985903] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 21.985925] assign_interrupt_mode Found MSI capability [ 21.985941] Allocate Port Service[0000:00:1c.1:pcie00] [ 21.985967] Allocate Port Service[0000:00:1c.1:pcie02] [ 21.985989] Allocate Port Service[0000:00:1c.1:pcie03] [ 21.986046] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 21.986068] assign_interrupt_mode Found MSI capability [ 21.986085] Allocate Port Service[0000:00:1c.2:pcie00] [ 21.986109] Allocate Port Service[0000:00:1c.2:pcie02] [ 21.986131] Allocate Port Service[0000:00:1c.2:pcie03] [ 21.986190] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 21.986212] assign_interrupt_mode Found MSI capability [ 21.986229] Allocate Port Service[0000:00:1c.3:pcie00] [ 21.986252] Allocate Port Service[0000:00:1c.3:pcie02] [ 21.986275] Allocate Port Service[0000:00:1c.3:pcie03] [ 21.986332] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 21.986354] assign_interrupt_mode Found MSI capability [ 21.986371] Allocate Port Service[0000:00:1c.4:pcie00] [ 21.986395] Allocate Port Service[0000:00:1c.4:pcie02] [ 21.986417] Allocate Port Service[0000:00:1c.4:pcie03] [ 21.986478] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 21.986496] Allocate Port Service[0000:01:00.0:pcie10] [ 21.986549] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 21.986567] Allocate Port Service[0000:02:00.0:pcie20] [ 21.986620] PCI: Setting latency timer of device 0000:02:01.0 to 64 [ 21.986638] Allocate Port Service[0000:02:01.0:pcie20] [ 22.002322] Real Time Clock Driver v1.12ac [ 22.002361] Linux agpgart interface v0.101 (c) Dave Jones [ 22.002363] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 22.002794] mice: PS/2 mouse device common for all mice [ 22.003226] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 22.003301] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 22.003304] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 22.003470] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 22.006164] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 22.006166] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 22.006287] TCP cubic registered [ 22.006294] NET: Registered protocol family 1 [ 22.006299] NET: Registered protocol family 8 [ 22.006300] NET: Registered protocol family 20 [ 22.006372] ACPI: (supports S0 S3 S4 S5) [ 22.006410] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 22.006471] Freeing unused kernel memory: 300k freed [ 22.025994] input: AT Translated Set 2 keyboard as /class/input/input0 [ 23.121251] Capability LSM initialized [ 23.143953] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 23.165418] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707] [ 23.165451] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] [ 23.165456] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] [ 23.165940] ACPI Error (dswstate-0226): No result objects! State=ffff810037efd400 [20060707] [ 23.165944] ACPI Exception (dsutils-0643): AE_AML_NO_RETURN_VALUE, Missing or null operand [20060707] [ 23.165947] ACPI Exception (dsutils-0736): AE_AML_NO_RETURN_VALUE, While creating Arg 1 [20060707] [ 23.165951] ACPI Error (psparse-0537): Method parse/execution failed [\_TZ_.THRM._TMP] (Node ffff81007e2aad30), AE_AML_NO_RETURN_VALUE [ 23.198632] md: linear personality registered for level -1 [ 23.200448] md: multipath personality registered for level -4 [ 23.202100] md: raid0 personality registered for level 0 [ 23.204168] md: raid1 personality registered for level 1 [ 23.205731] raid5: automatically using best checksumming function: generic_sse [ 23.224995] generic_sse: 8921.000 MB/sec [ 23.224997] raid5: using function: generic_sse (8921.000 MB/sec) [ 23.292955] raid6: int64x1 2063 MB/s [ 23.360921] raid6: int64x2 2832 MB/s [ 23.428886] raid6: int64x4 3123 MB/s [ 23.496844] raid6: int64x8 1926 MB/s [ 23.564815] raid6: sse2x1 3939 MB/s [ 23.632773] raid6: sse2x2 4598 MB/s [ 23.700742] raid6: sse2x4 7257 MB/s [ 23.700744] raid6: using algorithm sse2x4 (7257 MB/s) [ 23.700747] md: raid6 personality registered for level 6 [ 23.700749] md: raid5 personality registered for level 5 [ 23.700750] md: raid4 personality registered for level 4 [ 23.700907] SCSI subsystem initialized [ 23.709235] libata version 2.00 loaded. [ 23.710105] sata_sil24 0000:06:00.0: version 0.3 [ 23.710123] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 23.710160] PCI: Setting latency timer of device 0000:06:00.0 to 64 [ 23.710214] ata1: SATA max UDMA/100 cmd 0xFFFFC20000020000 ctl 0x0 bmdma 0x0 irq 17 [ 23.710248] ata2: SATA max UDMA/100 cmd 0xFFFFC20000022000 ctl 0x0 bmdma 0x0 irq 17 [ 23.710256] scsi0 : sata_sil24 [ 23.788127] ieee1394: Initialized config rom entry `ip1394' [ 23.793000] usbcore: registered new interface driver usbfs [ 23.793195] usbcore: registered new interface driver hub [ 23.794412] usbcore: registered new device driver usb [ 23.797366] USB Universal Host Controller Interface driver v3.0 [ 23.807331] md: raid10 personality registered for level 10 [ 24.024461] ata1: SATA link down (SStatus 0 SControl 300) [ 24.024475] scsi1 : sata_sil24 [ 24.340288] ata2: SATA link down (SStatus 0 SControl 300) [ 24.340319] ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 24.340356] PCI: Setting latency timer of device 0000:08:00.0 to 64 [ 24.340396] ata3: SATA max UDMA/100 cmd 0xFFFFC20000038000 ctl 0x0 bmdma 0x0 irq 19 [ 24.340429] ata4: SATA max UDMA/100 cmd 0xFFFFC2000003A000 ctl 0x0 bmdma 0x0 irq 19 [ 24.340438] scsi2 : sata_sil24 [ 24.656112] ata3: SATA link down (SStatus 0 SControl 300) [ 24.656121] scsi3 : sata_sil24 [ 24.967943] ata4: SATA link down (SStatus 0 SControl 300) [ 24.968095] ACPI: PCI Interrupt 0000:0a:02.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 24.970519] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 24.970526] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 24.970529] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 24.970720] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 24.970742] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00 [ 24.971068] usb usb1: configuration #1 chosen from 1 choice [ 24.971088] hub 1-0:1.0: USB hub found [ 24.971092] hub 1-0:1.0: 2 ports detected [ 25.018232] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fd5ff000-fd5ff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 25.075943] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 25.075950] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 25.075952] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 25.075966] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 25.075984] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00 [ 25.076041] usb usb2: configuration #1 chosen from 1 choice [ 25.076058] hub 2-0:1.0: USB hub found [ 25.076062] hub 2-0:1.0: 2 ports detected [ 25.183872] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 25.183877] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 25.183880] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 25.183892] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 25.183912] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00 [ 25.183968] usb usb3: configuration #1 chosen from 1 choice [ 25.183983] hub 3-0:1.0: USB hub found [ 25.183987] hub 3-0:1.0: 2 ports detected [ 25.287817] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 25.287822] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 25.287824] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 25.287838] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 25.287858] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00 [ 25.287913] usb usb4: configuration #1 chosen from 1 choice [ 25.287930] hub 4-0:1.0: USB hub found [ 25.287933] hub 4-0:1.0: 2 ports detected [ 25.391783] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 25.391793] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 25.391796] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 25.391811] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 25.391831] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 25.391834] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000 [ 25.395714] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 25.395763] usb usb5: configuration #1 chosen from 1 choice [ 25.395778] hub 5-0:1.0: USB hub found [ 25.395782] hub 5-0:1.0: 8 ports detected [ 25.423690] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 25.499722] r8169 Gigabit Ethernet driver 2.2LK loaded [ 25.499738] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 25.499754] PCI: Setting latency timer of device 0000:07:00.0 to 64 [ 25.499917] eth0: RTL8168b/8111b at 0xffffc20000052000, 00:50:8d:94:79:72, IRQ 18 [ 25.506824] ICH7: IDE controller at PCI slot 0000:00:1f.1 [ 25.506829] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 25.506833] ICH7: chipset revision 1 [ 25.506835] ICH7: not 100% native mode: will probe irqs later [ 25.506842] ide0: BM-DMA at 0xfb00-0xfb07, BIOS settings: hda:DMA, hdb:DMA [ 25.506851] ide1: BM-DMA at 0xfb08-0xfb0f, BIOS settings: hdc:pio, hdd:pio [ 25.506858] Probing IDE interface ide0... [ 26.119314] usb 5-3: new high speed USB device using ehci_hcd and address 2 [ 26.247437] hda: PLEXTOR DVD-ROM PX-130A, ATAPI CD/DVD-ROM drive [ 26.262096] usb 5-3: configuration #1 chosen from 1 choice [ 26.291310] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00508d00009289b4] [ 26.687006] usb 5-5: new high speed USB device using ehci_hcd and address 4 [ 26.823795] usb 5-5: configuration #1 chosen from 1 choice [ 27.031007] hdb: PLEXTOR DVDR PX-760A, ATAPI CD/DVD-ROM drive [ 27.066799] usb 5-7: new high speed USB device using ehci_hcd and address 5 [ 27.088222] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 27.088258] Probing IDE interface ide1... [ 27.201970] usb 5-7: configuration #1 chosen from 1 choice [ 27.202761] usbcore: registered new interface driver libusual [ 27.204750] Initializing USB Mass Storage driver... [ 27.442595] usb 2-2: new low speed USB device using uhci_hcd and address 3 [ 27.658518] ata_piix 0000:00:1f.2: version 2.00ac7 [ 27.658524] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 27.658542] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 27.658554] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 27.658578] ata5: SATA max UDMA/133 cmd 0xFA00 ctl 0xF902 bmdma 0xF600 irq 19 [ 27.658597] ata6: SATA max UDMA/133 cmd 0xF800 ctl 0xF702 bmdma 0xF608 irq 19 [ 27.658602] scsi4 : ata_piix [ 27.828620] ata5.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32) [ 27.828623] ata5.00: ata5: dev 0 multi count 16 [ 27.844580] ata5.00: configured for UDMA/133 [ 27.844586] scsi5 : ata_piix [ 28.016477] ata6.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32) [ 28.016479] ata6.00: ata6: dev 0 multi count 16 [ 28.032457] ata6.00: configured for UDMA/133 [ 28.032518] scsi 4:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 [ 28.032582] scsi 5:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 [ 28.037982] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) [ 28.037990] sda: Write Protect is off [ 28.037992] sda: Mode Sense: 00 3a 00 00 [ 28.038002] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 28.038037] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) [ 28.038043] sda: Write Protect is off [ 28.038044] sda: Mode Sense: 00 3a 00 00 [ 28.038054] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 28.038058] sda:<6>hda: ATAPI 50X DVD-ROM drive, 512kB Cache, UDMA(33) [ 28.040438] Uniform CD-ROM driver Revision: 3.20 [ 28.043499] sda1 [ 28.043529] sd 4:0:0:0: Attached scsi disk sda [ 28.043795] SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) [ 28.043802] sdb: Write Protect is off [ 28.043803] sdb: Mode Sense: 00 3a 00 00 [ 28.043814] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 28.043837] SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) [ 28.043843] sdb: Write Protect is off [ 28.043844] sdb: Mode Sense: 00 3a 00 00 [ 28.043854] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 28.043856] sdb:<6>hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66) [ 28.058353] sdb1 sdb2 < sdb5 > [ 28.077884] sd 5:0:0:0: Attached scsi disk sdb [ 28.079995] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 28.080009] sd 5:0:0:0: Attached scsi generic sg1 type 0 [ 28.265547] Attempting manual resume [ 28.301713] kjournald starting. Commit interval 5 seconds [ 28.301719] EXT3-fs: mounted filesystem with ordered data mode. [ 28.915077] usb 2-2: configuration #1 chosen from 1 choice [ 28.918114] scsi6 : SCSI emulation for USB Mass Storage devices [ 28.918145] usb-storage: device found at 2 [ 28.918146] usb-storage: waiting for device to settle before scanning [ 28.918171] scsi7 : SCSI emulation for USB Mass Storage devices [ 28.918195] usb-storage: device found at 4 [ 28.918197] usb-storage: waiting for device to settle before scanning [ 28.918210] usbcore: registered new interface driver usb-storage [ 28.918212] USB Mass Storage support registered. [ 33.915213] usb-storage: device scan complete [ 33.915702] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 33.916201] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 33.916701] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 33.917200] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 33.918216] sd 6:0:0:0: Attached scsi removable disk sdc [ 33.918239] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 33.919092] sd 6:0:0:1: Attached scsi removable disk sdd [ 33.919113] sd 6:0:0:1: Attached scsi generic sg3 type 0 [ 33.919198] usb-storage: device scan complete [ 33.919576] scsi 7:0:0:0: Direct-Access TOSHIBA MK4025GAS KA10 PQ: 0 ANSI: 2 [ 33.919962] sd 6:0:0:2: Attached scsi removable disk sde [ 33.919981] sd 6:0:0:2: Attached scsi generic sg4 type 0 [ 33.920833] sd 6:0:0:3: Attached scsi removable disk sdf [ 33.920852] sd 6:0:0:3: Attached scsi generic sg5 type 0 [ 33.921566] SCSI device sdg: 78140160 512-byte hdwr sectors (40008 MB) [ 33.922439] sdg: Write Protect is off [ 33.922441] sdg: Mode Sense: 53 00 00 08 [ 33.922443] sdg: assuming drive cache: write through [ 33.923316] SCSI device sdg: 78140160 512-byte hdwr sectors (40008 MB) [ 33.924191] sdg: Write Protect is off [ 33.924193] sdg: Mode Sense: 53 00 00 08 [ 33.924194] sdg: assuming drive cache: write through [ 33.924196] sdg: sdg1 < sdg5 sdg6 > [ 34.258693] sd 7:0:0:0: Attached scsi disk sdg [ 34.258713] sd 7:0:0:0: Attached scsi generic sg6 type 0 [ 36.950227] r8169: eth0: link up [ 36.950234] r8169: eth0: link up [ 37.694325] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 37.695637] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 37.738232] iTCO_vendor_support: vendor-support=0 [ 37.739125] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006) [ 37.739177] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) [ 37.739202] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 37.753097] intel_rng: FWH not detected [ 37.854554] input: PC Speaker as /class/input/input1 [ 38.006156] Floppy drive(s): fd0 is 1.44M [ 38.022055] usbcore: registered new interface driver hiddev [ 38.028489] FDC 0 is a post-1991 82077 [ 38.119311] usbcore: registered new interface driver usbhid [ 38.119315] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 38.138538] nvidia: module license 'NVIDIA' taints kernel. [ 38.392915] PCI: Enabling device 0000:03:00.0 (0000 -> 0003) [ 38.392922] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 38.392930] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 38.393000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 38.393004] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 38.393073] NVRM: loading NVIDIA Linux x86_64 Kernel Module 1.0-9631 Thu Nov 9 17:35:27 PST 2006 [ 38.448565] input: PS2++ Logitech MX Mouse as /class/input/input2 [ 38.501586] NET: Registered protocol family 17 [ 38.519003] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 38.519016] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 38.615321] usbcore: registered new interface driver snd-usb-audio [ 38.728477] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS... [ 38.957604] lp: driver loaded but no devices found [ 39.033243] fuse init (API version 7.8) [ 39.062065] Adding 6032368k swap on /dev/disk/by-uuid/098be198-d0ca-4eac-b89a-a698a90e8ef6. Priority:-1 extents:1 across:6032368k [ 39.204217] EXT3 FS on sdb1, internal journal [ 40.392368] Adding 6032368k swap on /dev/disk/by-uuid/098be198-d0ca-4eac-b89a-a698a90e8ef6. Priority:-2 extents:1 across:6032368k [ 43.532495] NET: Registered protocol family 10 [ 43.532562] lo: Disabled Privacy Extensions [ 46.314988] IA-32 Microcode Update Driver: v1.14a [ 46.715564] input: Power Button (FF) as /class/input/input3 [ 46.715584] ACPI: Power Button (FF) [PWRF] [ 46.715606] input: Power Button (CM) as /class/input/input4 [ 46.715618] ACPI: Power Button (CM) [PWRB] [ 46.744828] Using specific hotkey driver [ 46.776236] No dock devices found. [ 46.796166] ibm_acpi: ec object not found [ 49.587684] **WARNING** I2C adapter driver [NVIDIA i2c adapter 0 at 4:00.0] forgot to specify physical device; fix it! [ 49.587722] **WARNING** I2C adapter driver [NVIDIA i2c adapter 1 at 4:00.0] forgot to specify physical device; fix it! [ 49.587739] **WARNING** I2C adapter driver [NVIDIA i2c adapter 2 at 4:00.0] forgot to specify physical device; fix it! [ 50.479584] **WARNING** I2C adapter driver [NVIDIA i2c adapter 0 at 3:00.0] forgot to specify physical device; fix it! [ 50.479625] **WARNING** I2C adapter driver [NVIDIA i2c adapter 1 at 3:00.0] forgot to specify physical device; fix it! [ 50.479642] **WARNING** I2C adapter driver [NVIDIA i2c adapter 2 at 3:00.0] forgot to specify physical device; fix it! [ 53.824275] eth0: no IPv6 routers present [ 65.504651] Bluetooth: Core ver 2.11 [ 65.504690] NET: Registered protocol family 31 [ 65.504692] Bluetooth: HCI device and connection manager initialized [ 65.504694] Bluetooth: HCI socket layer initialized [ 65.580593] Bluetooth: L2CAP ver 2.8 [ 65.580596] Bluetooth: L2CAP socket layer initialized [ 65.780876] Bluetooth: RFCOMM socket layer initialized [ 65.780885] Bluetooth: RFCOMM TTY layer initialized [ 65.780886] Bluetooth: RFCOMM ver 1.8 [ 79.270476] eth0: no IPv6 routers present [ 81.803433] ReiserFS: sdg6: found reiserfs format "3.6" with standard journal [ 81.803449] ReiserFS: sdg6: using ordered data mode [ 81.814305] ReiserFS: sdg6: journal params: device sdg6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 81.814740] ReiserFS: sdg6: checking transaction log (sdg6) [ 81.892014] ReiserFS: sdg6: Using r5 hash to sort names