[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-11-generic (buildd@rothera) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #48-Ubuntu SMP Fri Jul 29 19:05:14 UTC 2011 (Ubuntu 2.6.38-11.48-generic 2.6.38.8) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000004fff0000 (usable) [ 0.000000] BIOS-e820: 000000004fff0000 - 000000004fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000004fff3000 - 0000000050000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: /GA-8ST667, BIOS 6.00 PG 11/20/2002 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x4fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CEFFF write-protect [ 0.000000] CF000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 040000000 mask FF0000000 write-back [ 0.000000] 2 base 0E0000000 mask FFC000000 write-combining [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00f56f0] f56f0 [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000 [ 0.000000] RAMDISK: 3676e000 - 373af000 [ 0.000000] ACPI: RSDP 000f7170 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 4fff3000 0002C (v01 GBT AWRDACPI 42302E31 AWRD 01010101) [ 0.000000] ACPI: FACP 4fff3040 00074 (v01 GBT AWRDACPI 42302E31 AWRD 01010101) [ 0.000000] ACPI: DSDT 4fff30c0 03A47 (v01 GBT AWRDACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 4fff0000 00040 [ 0.000000] ACPI: APIC 4fff6b40 00068 (v01 GBT AWRDACPI 42302E31 AWRD 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 391MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0004fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x0004fff0 [ 0.000000] On node 0 totalpages: 327552 [ 0.000000] free_area_init_node: node 0, pgdat c1784180, node_mem_map f5d6e200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3952 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 784 pages used for memmap [ 0.000000] HighMem zone: 99554 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 50000000:aec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f5800000 s28800 r0 d24448 u2097152 [ 0.000000] pcpu-alloc: s28800 r0 d24448 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 324992 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-11-generic root=UUID=076ef328-e07b-4607-9899-3795b8b3e044 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 6552960 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0004fff0) [ 0.000000] Memory: 1270720k/1310656k available (5190k kernel code, 39488k reserved, 2538k data, 700k init, 401352k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc178d000 - 0xc183c000 ( 700 kB) [ 0.000000] .data : 0xc1511ba1 - 0xc178c500 (2538 kB) [ 0.000000] .text : 0xc1000000 - 0xc1511ba1 (5190 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=f4c08000 soft=f4c0a000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2412.058 MHz processor. [ 0.008006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4824.11 BogoMIPS (lpj=9648232) [ 0.008015] pid_max: default: 32768 minimum: 301 [ 0.008056] Security Framework initialized [ 0.008093] AppArmor: AppArmor initialized [ 0.008098] Yama: becoming mindful. [ 0.008195] Mount-cache hash table entries: 512 [ 0.008440] Initializing cgroup subsys ns [ 0.008447] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.008453] Initializing cgroup subsys cpuacct [ 0.008461] Initializing cgroup subsys memory [ 0.008476] Initializing cgroup subsys devices [ 0.008481] Initializing cgroup subsys freezer [ 0.008486] Initializing cgroup subsys net_cls [ 0.008490] Initializing cgroup subsys blkio [ 0.008551] CPU0: Hyper-Threading is disabled [ 0.008557] mce: CPU supports 4 MCE banks [ 0.008574] CPU0: Thermal monitoring enabled (TM1) [ 0.009488] SMP alternatives: switching to UP code [ 0.023608] ACPI: Core revision 20110112 [ 0.028024] ftrace: allocating 23649 entries in 47 pages [ 0.032120] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.036214] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.075902] CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 04 [ 0.076004] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.076004] ... version: 0 [ 0.076004] ... bit width: 40 [ 0.076004] ... generic registers: 18 [ 0.076004] ... value mask: 000000ffffffffff [ 0.076004] ... max period: 0000007fffffffff [ 0.076004] ... fixed-purpose events: 0 [ 0.076004] ... event mask: 000000000003ffff [ 0.076004] Brought up 1 CPUs [ 0.076004] Total of 1 processors activated (4824.11 BogoMIPS). [ 0.076004] devtmpfs: initialized [ 0.076004] print_constraints: dummy: [ 0.076004] Time: 8:49:02 Date: 09/22/11 [ 0.076004] NET: Registered protocol family 16 [ 0.076004] EISA bus registered [ 0.076004] ACPI: bus type pci registered [ 0.088632] PCI: PCI BIOS revision 2.10 entry at 0xfae00, last bus=2 [ 0.088636] PCI: Using configuration type 1 for base access [ 0.090326] bio: create slab at 0 [ 0.091371] ACPI: EC: Look up EC in DSDT [ 0.095370] ACPI: Interpreter enabled [ 0.095380] ACPI: (supports S0 S1 S4 S5) [ 0.095409] ACPI: Using IOAPIC for interrupt routing [ 0.100961] ACPI: No dock devices found. [ 0.100966] HEST: Table not found. [ 0.100973] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.101061] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.101236] pci_root PNP0A03:00: host bridge window [io 0x0000-0x047f] (ignored) [ 0.101241] pci_root PNP0A03:00: host bridge window [io 0x0490-0x0cf7] (ignored) [ 0.101246] pci_root PNP0A03:00: host bridge window [io 0x0d00-0x0fff] (ignored) [ 0.101250] pci_root PNP0A03:00: host bridge window [io 0x1100-0xffff] (ignored) [ 0.101255] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.101260] pci_root PNP0A03:00: host bridge window [mem 0x50000000-0xffee0000] (ignored) [ 0.101283] pci 0000:00:00.0: [1039:0646] type 0 class 0x000600 [ 0.101298] pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xe3ffffff] [ 0.101385] pci 0000:00:01.0: [1039:0001] type 1 class 0x000604 [ 0.101439] pci 0000:00:02.0: [1039:0008] type 0 class 0x000601 [ 0.101524] pci 0000:00:02.0: Enabling SiS 96x SMBus [ 0.101547] pci 0000:00:02.1: [1039:0016] type 0 class 0x000c05 [ 0.101605] pci 0000:00:02.1: reg 20: [io 0x1400-0x141f] [ 0.101654] pci 0000:00:02.5: [1039:5513] type 0 class 0x000101 [ 0.101720] pci 0000:00:02.5: reg 20: [io 0xf000-0xf00f] [ 0.101772] pci 0000:00:02.7: [1039:7012] type 0 class 0x000401 [ 0.101795] pci 0000:00:02.7: reg 10: [io 0xe000-0xe0ff] [ 0.101809] pci 0000:00:02.7: reg 14: [io 0xe400-0xe47f] [ 0.101883] pci 0000:00:02.7: supports D1 D2 [ 0.101887] pci 0000:00:02.7: PME# supported from D3hot D3cold [ 0.101894] pci 0000:00:02.7: PME# disabled [ 0.101913] pci 0000:00:03.0: [1039:7001] type 0 class 0x000c03 [ 0.101932] pci 0000:00:03.0: reg 10: [mem 0xe9000000-0xe9000fff] [ 0.102012] pci 0000:00:03.1: [1039:7001] type 0 class 0x000c03 [ 0.102030] pci 0000:00:03.1: reg 10: [mem 0xe9001000-0xe9001fff] [ 0.102110] pci 0000:00:03.2: [1039:7001] type 0 class 0x000c03 [ 0.102129] pci 0000:00:03.2: reg 10: [mem 0xe9002000-0xe9002fff] [ 0.102212] pci 0000:00:03.3: [1039:7002] type 0 class 0x000c03 [ 0.102235] pci 0000:00:03.3: reg 10: [mem 0xe9003000-0xe9003fff] [ 0.102315] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold [ 0.102322] pci 0000:00:03.3: PME# disabled [ 0.102362] pci 0000:00:0a.0: [10ec:8139] type 0 class 0x000200 [ 0.102385] pci 0000:00:0a.0: reg 10: [io 0xe800-0xe8ff] [ 0.102399] pci 0000:00:0a.0: reg 14: [mem 0xe9004000-0xe90040ff] [ 0.102453] pci 0000:00:0a.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.102478] pci 0000:00:0a.0: supports D1 D2 [ 0.102481] pci 0000:00:0a.0: PME# supported from D1 D2 D3hot [ 0.102487] pci 0000:00:0a.0: PME# disabled [ 0.102514] pci 0000:00:0b.0: [3388:0021] type 1 class 0x000604 [ 0.102590] pci 0000:00:0b.0: supports D1 D2 [ 0.102594] pci 0000:00:0b.0: PME# supported from D1 D2 D3hot D3cold [ 0.102600] pci 0000:00:0b.0: PME# disabled [ 0.102674] pci 0000:01:00.0: [10de:0342] type 0 class 0x000300 [ 0.102696] pci 0000:01:00.0: reg 10: [mem 0xe4000000-0xe4ffffff] [ 0.102708] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff pref] [ 0.102750] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.102819] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.102826] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.102833] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe5ffffff] [ 0.102840] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref] [ 0.102934] pci 0000:02:0c.0: [14f1:8800] type 0 class 0x000400 [ 0.102964] pci 0000:02:0c.0: reg 10: [mem 0xe7000000-0xe7ffffff] [ 0.103109] pci 0000:02:0d.0: [104c:8024] type 0 class 0x000c00 [ 0.103136] pci 0000:02:0d.0: reg 10: [mem 0xe8004000-0xe80047ff] [ 0.103154] pci 0000:02:0d.0: reg 14: [mem 0xe8000000-0xe8003fff] [ 0.103241] pci 0000:02:0d.0: supports D1 D2 [ 0.103245] pci 0000:02:0d.0: PME# supported from D0 D1 D2 D3hot [ 0.103252] pci 0000:02:0d.0: PME# disabled [ 0.103297] pci 0000:00:0b.0: PCI bridge to [bus 02-02] [ 0.103304] pci 0000:00:0b.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.103311] pci 0000:00:0b.0: bridge window [mem 0xe7000000-0xe8ffffff] [ 0.103318] pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.103337] pci_bus 0000:00: on NUMA node 0 [ 0.103343] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.121266] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) [ 0.121349] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.121432] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.121513] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.121593] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.121679] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) [ 0.121763] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.121848] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.122035] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.122042] vgaarb: loaded [ 0.122413] SCSI subsystem initialized [ 0.122520] libata version 3.00 loaded. [ 0.122610] usbcore: registered new interface driver usbfs [ 0.122638] usbcore: registered new interface driver hub [ 0.122684] usbcore: registered new device driver usb [ 0.122873] wmi: Mapper loaded [ 0.122877] PCI: Using ACPI for IRQ routing [ 0.122884] PCI: pci_cache_line_size set to 64 bytes [ 0.122963] reserve RAM buffer: 000000004fff0000 - 000000004fffffff [ 0.123130] NetLabel: Initializing [ 0.123134] NetLabel: domain hash size = 128 [ 0.123137] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.123155] NetLabel: unlabeled traffic allowed by default [ 0.136240] AppArmor: AppArmor Filesystem Enabled [ 0.136299] pnp: PnP ACPI init [ 0.136332] ACPI: bus type pnp registered [ 0.136661] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.136738] pnp 00:01: [bus 00-ff] [ 0.136743] pnp 00:01: [io 0x0cf8-0x0cff] [ 0.136747] pnp 00:01: [io 0x0000-0x047f window] [ 0.136751] pnp 00:01: [io 0x0480-0x048f] [ 0.136755] pnp 00:01: [io 0x0490-0x0cf7 window] [ 0.136758] pnp 00:01: [io 0x0d00-0x0fff window] [ 0.136762] pnp 00:01: [io 0x1000-0x107f] [ 0.136766] pnp 00:01: [io 0x1080-0x10ff] [ 0.136769] pnp 00:01: [io 0x1400-0x147f] [ 0.136773] pnp 00:01: [io 0x1100-0xffff window] [ 0.136777] pnp 00:01: [mem 0x000a0000-0x000bffff window] [ 0.136781] pnp 00:01: [mem 0x50000000-0xffee0000 window] [ 0.136860] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.137160] pnp 00:02: [io 0x0010-0x001f] [ 0.137164] pnp 00:02: [io 0x0022-0x003f] [ 0.137168] pnp 00:02: [io 0x0044-0x005f] [ 0.137171] pnp 00:02: [io 0x0062-0x0063] [ 0.137174] pnp 00:02: [io 0x0065-0x006f] [ 0.137178] pnp 00:02: [io 0x0074-0x007f] [ 0.137181] pnp 00:02: [io 0x0091-0x0093] [ 0.137184] pnp 00:02: [io 0x00a2-0x00bf] [ 0.137188] pnp 00:02: [io 0x00e0-0x00ef] [ 0.137191] pnp 00:02: [io 0x04d0-0x04d1] [ 0.137195] pnp 00:02: [io 0x0800-0x0805] [ 0.137275] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.137280] system 00:02: [io 0x0800-0x0805] has been reserved [ 0.137285] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.137308] pnp 00:03: [dma 4] [ 0.137317] pnp 00:03: [io 0x0000-0x000f] [ 0.137321] pnp 00:03: [io 0x0080-0x0090] [ 0.137324] pnp 00:03: [io 0x0094-0x009f] [ 0.137327] pnp 00:03: [io 0x00c0-0x00df] [ 0.137382] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.137401] pnp 00:04: [io 0x0070-0x0073] [ 0.137420] pnp 00:04: [irq 8] [ 0.137470] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.137486] pnp 00:05: [io 0x0061] [ 0.137536] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.137553] pnp 00:06: [io 0x00f0-0x00ff] [ 0.137560] pnp 00:06: [irq 13] [ 0.137611] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.137801] pnp 00:07: [io 0x03f0-0x03f5] [ 0.137805] pnp 00:07: [io 0x03f7] [ 0.137812] pnp 00:07: [irq 6] [ 0.137816] pnp 00:07: [dma 2] [ 0.137894] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.138145] pnp 00:08: [io 0x03f8-0x03ff] [ 0.138152] pnp 00:08: [irq 4] [ 0.138250] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.138524] pnp 00:09: [io 0x02f8-0x02ff] [ 0.138532] pnp 00:09: [irq 3] [ 0.138629] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.138914] pnp 00:0a: [io 0x0378-0x037f] [ 0.138922] pnp 00:0a: [irq 7] [ 0.139011] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.139160] pnp 00:0b: [io 0x0060] [ 0.139164] pnp 00:0b: [io 0x0064] [ 0.139171] pnp 00:0b: [irq 1] [ 0.139227] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.139497] pnp 00:0c: [io 0x0330-0x0331] [ 0.139505] pnp 00:0c: [irq 10] [ 0.139586] pnp 00:0c: Plug and Play ACPI device, IDs PNPb006 (active) [ 0.139812] pnp 00:0d: [io 0x0201] [ 0.139878] pnp 00:0d: Plug and Play ACPI device, IDs PNPb02f (active) [ 0.139889] pnp: PnP ACPI: found 14 devices [ 0.139893] ACPI: ACPI bus type pnp unregistered [ 0.139900] PnPBIOS: Disabled by ACPI PNP [ 0.177366] Switching to clocksource acpi_pm [ 0.177426] pci 0000:00:0a.0: BAR 6: assigned [mem 0x50000000-0x5001ffff pref] [ 0.177435] pci 0000:01:00.0: BAR 6: assigned [mem 0xe5000000-0xe501ffff pref] [ 0.177440] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.177443] pci 0000:00:01.0: bridge window [io disabled] [ 0.177453] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe5ffffff] [ 0.177460] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref] [ 0.177470] pci 0000:00:0b.0: PCI bridge to [bus 02-02] [ 0.177473] pci 0000:00:0b.0: bridge window [io disabled] [ 0.177481] pci 0000:00:0b.0: bridge window [mem 0xe7000000-0xe8ffffff] [ 0.177488] pci 0000:00:0b.0: bridge window [mem pref disabled] [ 0.177514] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.177519] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.177523] pci_bus 0000:01: resource 1 [mem 0xe4000000-0xe5ffffff] [ 0.177528] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff pref] [ 0.177533] pci_bus 0000:02: resource 1 [mem 0xe7000000-0xe8ffffff] [ 0.177598] NET: Registered protocol family 2 [ 0.177703] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.178127] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.179217] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.179895] TCP: Hash tables configured (established 131072 bind 65536) [ 0.179901] TCP reno registered [ 0.179912] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.179940] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.179940] Switched to NOHz mode on CPU #0 [ 0.179940] NET: Registered protocol family 1 [ 0.228056] pci 0000:01:00.0: Boot video device [ 0.228068] PCI: CLS 32 bytes, default 64 [ 0.228405] cpufreq-nforce2: No nForce2 chipset. [ 0.228626] audit: initializing netlink socket (disabled) [ 0.228645] type=2000 audit(1316681342.224:1): initialized [ 0.239958] Trying to unpack rootfs image as initramfs... [ 0.256645] highmem bounce pool size: 64 pages [ 0.256656] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.263259] VFS: Disk quotas dquot_6.5.2 [ 0.263360] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.268441] fuse init (API version 7.16) [ 0.268643] msgmni has been set to 1697 [ 0.272320] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.276267] io scheduler noop registered [ 0.276274] io scheduler deadline registered [ 0.276338] io scheduler cfq registered (default) [ 0.276595] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.276641] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.276900] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.276910] ACPI: Power Button [PWRB] [ 0.276984] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.276991] ACPI: Sleep Button [FUTS] [ 0.277075] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.277082] ACPI: Power Button [PWRF] [ 0.277310] ACPI: acpi_idle registered with cpuidle [ 0.279278] ERST: Table is not found! [ 0.279428] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.299880] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.299964] isapnp: Scanning for PnP cards... [ 0.388876] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.430532] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.517024] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.540492] Linux agpgart interface v0.103 [ 0.542434] brd: module loaded [ 0.543311] loop: module loaded [ 0.543490] i2c-core: driver [adp5520] using legacy suspend method [ 0.543495] i2c-core: driver [adp5520] using legacy resume method [ 0.543697] pata_sis 0000:00:02.5: version 0.5.2 [ 0.548697] scsi0 : pata_sis [ 0.548869] scsi1 : pata_sis [ 0.549801] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.549806] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.550496] Fixed MDIO Bus: probed [ 0.550569] PPP generic driver version 2.4.2 [ 0.550689] tun: Universal TUN/TAP device driver, 1.6 [ 0.550693] tun: (C) 1999-2004 Max Krasnyansky [ 0.550846] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.550898] ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.550926] ehci_hcd 0000:00:03.3: EHCI Host Controller [ 0.550993] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 [ 0.551071] ehci_hcd 0000:00:03.3: irq 23, io mem 0xe9003000 [ 0.594649] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00 [ 0.594865] hub 1-0:1.0: USB hub found [ 0.594874] hub 1-0:1.0: 6 ports detected [ 0.594987] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.595028] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.595049] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 0.595120] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 [ 0.595155] ohci_hcd 0000:00:03.0: irq 20, io mem 0xe9000000 [ 0.674541] hub 2-0:1.0: USB hub found [ 0.674555] hub 2-0:1.0: 2 ports detected [ 0.674683] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.674712] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 0.674798] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 [ 0.674839] ohci_hcd 0000:00:03.1: irq 21, io mem 0xe9001000 [ 0.734128] hub 3-0:1.0: USB hub found [ 0.734141] hub 3-0:1.0: 2 ports detected [ 0.734273] ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.734301] ohci_hcd 0000:00:03.2: OHCI Host Controller [ 0.734378] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 [ 0.734424] ohci_hcd 0000:00:03.2: irq 22, io mem 0xe9002000 [ 0.790317] hub 4-0:1.0: USB hub found [ 0.790331] hub 4-0:1.0: 2 ports detected [ 0.790450] uhci_hcd: USB Universal Host Controller Interface driver [ 0.790620] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.790625] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.790792] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.790942] mousedev: PS/2 mouse device common for all mice [ 0.791165] rtc_cmos 00:04: RTC can wake from S4 [ 0.791237] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.791267] rtc0: alarms up to one year, 242 bytes nvram [ 0.791416] device-mapper: uevent: version 1.0.3 [ 0.791543] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 0.796557] device-mapper: multipath: version 1.2.0 loaded [ 0.796565] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.796782] EISA: Probing bus 0 at eisa.0 [ 0.796794] Cannot allocate resource for EISA slot 1 [ 0.796824] EISA: Detected 0 cards. [ 0.796912] cpuidle: using governor ladder [ 0.796916] cpuidle: using governor menu [ 0.797332] TCP cubic registered [ 0.797545] NET: Registered protocol family 10 [ 0.798376] NET: Registered protocol family 17 [ 0.798416] Registering the dns_resolver key type [ 0.798480] Using IPI No-Shortcut mode [ 0.798673] PM: Hibernation image not present or could not be loaded. [ 0.798694] registered taskstats version 1 [ 0.798949] Magic number: 11:306:827 [ 0.799076] rtc_cmos 00:04: setting system clock to 2011-09-22 08:49:03 UTC (1316681343) [ 0.799082] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.799085] EDD information not available. [ 0.884862] ata1.00: ATA-6: HDS722512VLAT80, V33OA60A, max UDMA/100 [ 0.884870] ata1.00: 241254720 sectors, multi 16: LBA48 [ 0.885821] ata1.01: ATA-5: WDC WD600JB-00CRA1, 17.07W17, max UDMA/100 [ 0.885827] ata1.01: 117231408 sectors, multi 16: LBA [ 0.888221] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.939994] isapnp: No Plug & Play device found [ 0.981152] ata1.00: configured for UDMA/100 [ 0.997257] ata1.01: configured for UDMA/100 [ 0.997482] scsi 0:0:0:0: Direct-Access ATA HDS722512VLAT80 V33O PQ: 0 ANSI: 5 [ 0.997795] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.997990] sd 0:0:0:0: [sda] 241254720 512-byte logical blocks: (123 GB/115 GiB) [ 0.998079] sd 0:0:0:0: [sda] Write Protect is off [ 0.998084] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.998122] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.012306] sda: sda1 [ 1.012591] scsi 0:0:1:0: Direct-Access ATA WDC WD600JB-00CR 17.0 PQ: 0 ANSI: 5 [ 1.012868] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 1.013205] sd 0:0:1:0: [sdb] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 1.013373] sd 0:0:1:0: [sdb] Write Protect is off [ 1.013379] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.013417] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.013445] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.063158] sdb: sdb1 sdb2 < sdb5 > [ 1.063736] sd 0:0:1:0: [sdb] Attached SCSI disk [ 1.108357] usb 1-3: new high speed USB device using ehci_hcd and address 3 [ 1.137015] Freeing initrd memory: 12548k freed [ 1.184263] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4160B, A300, max UDMA/66 [ 1.184273] ata2.01: ATAPI: TOSHIBA DVD-ROM SD-M1712, 1004, max UDMA/33 [ 1.184282] ata2.00: limited to UDMA/33 due to 40-wire cable [ 1.200244] ata2.00: configured for UDMA/33 [ 1.216322] ata2.01: configured for UDMA/33 [ 1.222964] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4160B A300 PQ: 0 ANSI: 5 [ 1.228922] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.228929] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.229152] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.229281] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 1.236021] Refined TSC clocksource calibration: 2412.326 MHz. [ 1.236029] Switching to clocksource tsc [ 1.236737] scsi 1:0:1:0: CD-ROM TOSHIBA DVD-ROM SD-M1712 1004 PQ: 0 ANSI: 5 [ 1.240235] sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 1.240413] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 1.240518] sr 1:0:1:0: Attached scsi generic sg3 type 5 [ 1.240633] Freeing unused kernel memory: 700k freed [ 1.241452] Write protecting the kernel text: 5192k [ 1.241505] Write protecting the kernel read-only data: 2148k [ 1.286626] <30>udev[64]: starting version 167 [ 1.642226] Floppy drive(s): fd0 is 1.44M [ 1.672251] FDC 0 is a post-1991 82077 [ 1.705727] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 1.705763] 8139cp 0000:00:0a.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 1.762610] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 1.762692] 8139too 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.785855] 8139too 0000:00:0a.0: eth0: RealTek RTL8139 at 0xe800, 00:19:e0:0d:09:86, IRQ 18 [ 1.797016] firewire_ohci 0000:02:0d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.803468] usbcore: registered new interface driver uas [ 1.814060] Initializing USB Mass Storage driver... [ 1.814242] scsi2 : usb-storage 1-3:1.0 [ 1.814865] usbcore: registered new interface driver usb-storage [ 1.814871] USB Mass Storage support registered. [ 1.852194] firewire_ohci: Added fw-ohci device 0000:02:0d.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [ 1.978052] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 2.256031] usb 3-2: new full speed USB device using ohci_hcd and address 2 [ 2.352186] firewire_core: created device fw0: GUID 003004010000a91e, S400 [ 2.772120] usb 4-2: new low speed USB device using ohci_hcd and address 2 [ 2.812921] scsi 2:0:0:0: Direct-Access A-DATA USB Flash Drive 1100 PQ: 0 ANSI: 0 CCS [ 2.813959] sd 2:0:0:0: Attached scsi generic sg4 type 0 [ 2.814398] sd 2:0:0:0: [sdc] 7925760 512-byte logical blocks: (4.05 GB/3.77 GiB) [ 2.815138] sd 2:0:0:0: [sdc] Write Protect is off [ 2.815143] sd 2:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 2.815147] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 2.817138] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 2.818375] sdc: sdc1 [ 2.820140] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 2.820146] sd 2:0:0:0: [sdc] Attached SCSI removable disk [ 3.292034] usb 2-1: new full speed USB device using ohci_hcd and address 2 [ 15.488405] Adding 1307644k swap on /dev/sdb5. Priority:-1 extents:1 across:1307644k [ 15.556543] <30>udev[283]: starting version 167 [ 15.641614] lp: driver loaded but no devices found [ 15.746710] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro [ 16.007828] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x1400 [ 16.093301] type=1400 audit(1316670558.790:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=424 comm="apparmor_parser" [ 16.111161] type=1400 audit(1316670558.806:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=424 comm="apparmor_parser" [ 16.111748] type=1400 audit(1316670558.806:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=424 comm="apparmor_parser" [ 16.451337] agpgart-sis 0000:00:00.0: SiS chipset [1039/0646] [ 16.457170] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 16.461296] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xe0000000 [ 16.537957] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 [ 16.933782] parport_pc 00:0a: reported by Plug and Play ACPI [ 16.933834] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 17.110417] lp0: using parport0 (interrupt-driven). [ 17.131756] gameport gameport0: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x201, speed 774kHz [ 17.300172] Linux video capture interface: v2.00 [ 17.824703] gspca: v2.12.0 registered [ 17.891951] type=1400 audit(1316670560.586:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=652 comm="apparmor_parser" [ 17.918370] type=1400 audit(1316670560.614:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=653 comm="apparmor_parser" [ 17.919325] type=1400 audit(1316670560.614:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=653 comm="apparmor_parser" [ 17.919923] type=1400 audit(1316670560.614:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=653 comm="apparmor_parser" [ 17.979525] type=1400 audit(1316670560.674:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=654 comm="apparmor_parser" [ 18.021376] [drm] Initialized drm 1.1.0 20060810 [ 18.027409] type=1400 audit(1316670560.722:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=654 comm="apparmor_parser" [ 18.044157] type=1400 audit(1316670560.742:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=654 comm="apparmor_parser" [ 18.152301] gspca: probing 0c45:613b [ 18.176063] sonixj: Sonix chip id: 12 [ 18.184313] input: sonixj as /devices/pci0000:00/0000:00:03.1/usb3/3-2/input/input4 [ 18.184584] gspca: video0 created [ 18.194088] usbcore: registered new interface driver sonixj [ 18.382216] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:03.2/usb4/4-2/4-2:1.0/input/input5 [ 18.440197] generic-usb 0003:045E:0084.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:03.2-2/input0 [ 18.440287] usbcore: registered new interface driver usbhid [ 18.440291] usbhid: USB HID core driver [ 18.699179] IR NEC protocol handler initialized [ 18.716689] IR RC5(x) protocol handler initialized [ 18.761013] IR RC6 protocol handler initialized [ 18.797887] IR JVC protocol handler initialized [ 18.837143] IR Sony protocol handler initialized [ 18.900576] lirc_dev: IR Remote Control driver registered, major 249 [ 18.943811] IR LIRC bridge handler initialized [ 19.376795] ppdev: user-space parallel port driver [ 19.967459] cx88/0: cx2388x v4l2 driver version 0.0.8 loaded [ 19.967542] cx8800 0000:02:0c.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 19.974045] cx88[0]: subsystem: 107d:6620, board: Leadtek Winfast DV2000 [card=8,autodetected], frontend(s): 0 [ 19.974052] cx88[0]: TV tuner type 38, Radio tuner type -1 [ 20.112366] i2c-core: driver [tuner] using legacy suspend method [ 20.112372] i2c-core: driver [tuner] using legacy resume method [ 20.154185] All bytes are equal. It is not a TEA5767 [ 20.154346] tuner 1-0060: chip found @ 0xc0 (cx88[0]) [ 20.332707] tuner 1-0043: chip found @ 0x86 (cx88[0]) [ 20.374427] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 20.399131] tda9887 1-0043: creating new instance [ 20.399136] tda9887 1-0043: tda988[5/6/7] found [ 20.417827] [drm] nouveau 0000:01:00.0: Detected an NV30 generation card (0x436200a1) [ 20.418126] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 20.459041] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 20.459241] [drm] nouveau 0000:01:00.0: BMP BIOS found [ 20.459245] [drm] nouveau 0000:01:00.0: BMP version 5.40 [ 20.459250] [drm] nouveau 0000:01:00.0: Bios version 04.36.20.30 [ 20.459255] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2 [ 20.459261] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 04000302 00000000 [ 20.459266] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000300 00009c40 [ 20.459270] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01010312 00000000 [ 20.459274] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02010310 00009c40 [ 20.459278] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 02020321 00000303 [ 20.459436] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode [ 20.459443] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xF062 [ 20.459490] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF526 [ 20.460629] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF79F [ 20.460672] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF912 [ 20.460738] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF92F [ 20.460805] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xF94C [ 20.583783] cx88[0]: Leadtek Winfast 2000XP Expert config: tuner=38, eeprom[0]=0x01 [ 20.917464] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xF9D5 [ 20.979789] tuner-simple 1-0060: creating new instance [ 20.979796] tuner-simple 1-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) [ 20.988204] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 21.018758] cx88[0]/0: found at 0000:02:0c.0, rev: 5, irq: 19, latency: 32, mmio: 0xe7000000 [ 21.032458] cx88[0]/0: registered device video1 [v4l2] [ 21.035442] cx88[0]/0: registered device vbi0 [ 21.042533] cx88[0]/0: registered device radio0 [ 21.242907] [drm] nouveau 0000:01:00.0: 2 available performance level(s) [ 21.242918] [drm] nouveau 0000:01:00.0: 0: memory 550MHz core 300MHz voltage 1300mV fanspeed 100% [ 21.242929] [drm] nouveau 0000:01:00.0: 1: memory 550MHz core 425MHz voltage 1350mV fanspeed 100% [ 21.242945] [drm] nouveau 0000:01:00.0: c: memory 399MHz core 199MHz voltage 1300mV [ 21.251581] [TTM] Zone kernel: Available graphics memory: 441308 kiB. [ 21.251587] [TTM] Zone highmem: Available graphics memory: 641984 kiB. [ 21.251591] [TTM] Initializing pool allocator. [ 21.251614] [drm] nouveau 0000:01:00.0: Detected 128MiB VRAM [ 21.251915] agpgart-sis 0000:00:00.0: AGP 2.0 bridge [ 21.251942] agpgart-sis 0000:00:00.0: putting AGP V2 device into 4x mode [ 21.251996] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode [ 21.264074] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture) [ 21.266185] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 21.266190] [drm] No driver support for vblank timestamp query. [ 21.272174] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 0) [ 21.272182] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [ 21.272188] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2) [ 21.272192] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 3) [ 21.272198] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 4) [ 21.453884] intel8x0_measure_ac97_clock: measured 151844 usecs (7295 samples) [ 21.453890] intel8x0: clocking to 48000 [ 21.508811] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x49000, bo f2955600 [ 21.512400] fbcon: nouveaufb (fb0) is primary device [ 21.514050] Console: switching to colour frame buffer device 128x48 [ 21.514089] fb0: nouveaufb frame buffer device [ 21.514093] drm: registered panic notifier [ 21.514110] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 [ 21.799153] audit_printk_skb: 9 callbacks suppressed [ 21.799158] type=1400 audit(1316670564.494:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1035 comm="apparmor_parser" [ 21.813163] type=1400 audit(1316670564.510:16): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1035 comm="apparmor_parser" [ 23.096826] [drm] nouveau 0000:01:00.0: 0xE3EB: Parsing digital output script table [ 23.152041] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 2) [ 23.152050] [drm] nouveau 0000:01:00.0: Output DVI-I-2 is running on CRTC 0 using output A [ 23.549306] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0 [ 27.184009] eth0: no IPv6 routers present [ 29.038575] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0