Welcome to PulseAudio! Use "help" for usage information.
>>> 4 sink(s) available.
    index: 0
	name: <alsa_output.pci-0000_01_00.1.hdmi-surround-extra3>
	driver: <module-alsa-card.c>
	flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 9050
	volume: 0: 100% 1: 100% 2: 100% 3: 100% 4: 100% 5: 100%
	        0: 0.00 dB 1: 0.00 dB 2: 0.00 dB 3: 0.00 dB 4: 0.00 dB 5: 0.00 dB
	        balance 0.00
	base volume: 100%
	             0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 0
	sample spec: s16le 6ch 44100Hz
	channel map: front-left,front-right,rear-left,rear-right,front-center,lfe
	             Surround 5.1
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
	card: 0 <alsa_card.pci-0000_01_00.1>
	module: 4
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "HDMI 0"
		alsa.id = "HDMI 0"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "9"
		alsa.card = "2"
		alsa.card_name = "HDA NVidia"
		alsa.long_card_name = "HDA NVidia at 0xfcffc000 irq 19"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:01:00.1"
		sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2"
		device.bus = "pci"
		device.vendor.id = "10de"
		device.vendor.name = "nVidia Corporation"
		device.product.id = "0bea"
		device.product.name = "GF108 High Definition Audio Controller"
		device.string = "hdmi:2,3"
		device.buffering.buffer_size = "1058304"
		device.buffering.fragment_size = "529152"
		device.access_mode = "mmap+timer"
		device.profile.name = "hdmi-surround-extra3"
		device.profile.description = "Digital Surround 5.1 (HDMI) nr 4"
		device.description = "GF108 High Definition Audio Controller Digital Surround 5.1 (HDMI) nr 4"
		alsa.mixer_name = "Nvidia GPU 14 HDMI/DP"
		alsa.components = "HDA:10de0014,10de0101,00100100"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		HDMI 4: HDMI 4 (priority 0, available: no)
	active port: <HDMI 4>
    index: 1
	name: <alsa_output.usb-Logitech_Logitech_USB_Headset-00-Headset.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 9049
	volume: 0:  56% 1:  56%
	        0: -15.00 dB 1: -15.00 dB
	        balance 0.00
	base volume:  89%
	             -3.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 1
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
	card: 1 <alsa_card.usb-Logitech_Logitech_USB_Headset-00-Headset>
	module: 5
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "3"
		alsa.card_name = "Logitech USB Headset"
		alsa.long_card_name = "Logitech Logitech USB Headset at usb-0000:00:12.0-1, full speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:12.0-usb-0:1:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/sound/card3"
		udev.id = "usb-Logitech_Logitech_USB_Headset-00-Headset"
		device.bus = "usb"
		device.vendor.id = "046d"
		device.vendor.name = "Logitech, Inc."
		device.product.id = "0a0c"
		device.product.name = "Clear Chat Comfort USB Headset"
		device.serial = "Logitech_Logitech_USB_Headset"
		device.form_factor = "headset"
		device.string = "front:3"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Clear Chat Comfort USB Headset Analog Stereo"
		alsa.mixer_name = "USB Mixer"
		alsa.components = "USB046d:0a0c"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-headset-usb"
		device.intended_roles = "phone"
	ports:
		analog-output-speaker: Analog Speakers (priority 10000, available: unknown)
	active port: <analog-output-speaker>
  * index: 2
	name: <alsa_output.pci-0000_00_14.2.analog-surround-51>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 9959
	volume: 0:  94% 1:  94% 2:  94% 3:  94% 4: 100% 5: 100%
	        0: -1.50 dB 1: -1.50 dB 2: -1.50 dB 3: -1.50 dB 4: 0.00 dB 5: 0.00 dB
	        balance 0.00
	base volume: 100%
	             0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 3
	sample spec: s16le 6ch 44100Hz
	channel map: front-left,front-right,rear-left,rear-right,front-center,lfe
	             Surround 5.1
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
	card: 2 <alsa_card.pci-0000_00_14.2>
	module: 6
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC888 Analog"
		alsa.id = "ALC888 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "HDA ATI SB"
		alsa.long_card_name = "HDA ATI SB at 0xfe024000 irq 16"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:14.2"
		sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
		device.bus = "pci"
		device.vendor.id = "1002"
		device.vendor.name = "ATI Technologies Inc"
		device.product.id = "4383"
		device.product.name = "SBx00 Azalia (Intel HDA)"
		device.form_factor = "internal"
		device.string = "surround51:0"
		device.buffering.buffer_size = "1058304"
		device.buffering.fragment_size = "529152"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-surround-51"
		device.profile.description = "Analog Surround 5.1"
		device.description = "Internal Audio Analog Surround 5.1"
		alsa.mixer_name = "Realtek ALC888"
		alsa.components = "HDA:10ec0888,1458e601,00100001"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output: Analog Output (priority 9900, available: unknown)
	active port: <analog-output>
    index: 3
	name: <alsa_output.pci-0000_03_07.0.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 9059
	volume: 0: 100% 1: 100%
	        0: 0.00 dB 1: 0.00 dB
	        balance 0.00
	base volume: 100%
	             0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 5
	sample spec: s32le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 743.04 ms
	card: 3 <alsa_card.pci-0000_03_07.0>
	module: 7
	properties:
		alsa.resolution_bits = "24"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ICE1724"
		alsa.id = "ICE1724"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "1"
		alsa.card_name = "ESI Juli@"
		alsa.long_card_name = "ESI Juli@ at 0xcf00, irq 21"
		alsa.driver_name = "snd_ice1724"
		device.bus_path = "pci-0000:03:07.0"
		sysfs.path = "/devices/pci0000:00/0000:00:14.4/0000:03:07.0/sound/card1"
		device.bus = "pci"
		device.vendor.id = "1412"
		device.vendor.name = "VIA Technologies Inc."
		device.product.id = "1724"
		device.product.name = "VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio Controller"
		device.string = "front:1"
		device.buffering.buffer_size = "262144"
		device.buffering.fragment_size = "131072"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio Controller Analog Stereo"
		alsa.mixer_name = "ICE1724 - multitrack"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output: Analog Output (priority 9900, available: unknown)
	active port: <analog-output>
>>>