[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff80000 (usable) [ 0.000000] BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ff8e000 - 000000007ffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] 1151MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000ff780 [ 0.000000] Entering add_active_range(0, 0, 524160) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 524160 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 524160 [ 0.000000] On node 0 totalpages: 524160 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2303 pages used for memmap [ 0.000000] HighMem zone: 292481 pages, LIFO batch:31 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xC00FBDC0 checksum 0 [ 0.000000] ACPI: RSDP 000FBDC0, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 7FF80000, 003C (r1 A_M_I_ OEMRSDT 7000719 MSFT 97) [ 0.000000] ACPI: FACP 7FF80200, 0084 (r2 A_M_I_ OEMFACP 7000719 MSFT 97) [ 0.000000] ACPI: DSDT 7FF805C0, 7A0C (r1 A0807 A0807000 0 INTL 20060113) [ 0.000000] ACPI: FACS 7FF8E000, 0040 [ 0.000000] ACPI: APIC 7FF80390, 006C (r1 A_M_I_ OEMAPIC 7000719 MSFT 97) [ 0.000000] ACPI: MCFG 7FF80400, 003C (r1 A_M_I_ OEMMCFG 7000719 MSFT 97) [ 0.000000] ACPI: OEMB 7FF8E040, 0081 (r1 A_M_I_ AMI_OEM 7000719 MSFT 97) [ 0.000000] ACPI: HPET 7FF87FD0, 0038 (r1 A_M_I_ OEMHPET 7000719 MSFT 97) [ 0.000000] ACPI: OSFR 7FF88010, 00B0 (r1 A_M_I_ OEMOSFR 7000719 MSFT 97) [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000) [ 0.000000] Built 1 zonelists. Total pages: 520065 [ 0.000000] Kernel command line: root=UUID=66a8c9ef-e643-4178-aff1-b15b874394ea ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2006.120 MHz processor. [ 20.547149] Console: colour VGA+ 80x25 [ 20.547360] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 20.547581] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 20.626559] Memory: 2067084k/2096640k available (2015k kernel code, 28252k reserved, 916k data, 364k init, 1179136k highmem) [ 20.626567] virtual kernel memory layout: [ 20.626568] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 20.626569] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 20.626570] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 20.626571] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 20.626572] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 20.626573] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB) [ 20.626574] .text : 0xc0100000 - 0xc02f7d26 (2015 kB) [ 20.626577] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 20.626612] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 20.626736] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 20.626740] hpet0: 4 64-bit timers, 14318180 Hz [ 20.707680] Calibrating delay using timer specific routine.. 4014.92 BogoMIPS (lpj=8029851) [ 20.707701] Security Framework v1.0.0 initialized [ 20.707707] SELinux: Disabled at boot. [ 20.707718] Mount-cache hash table entries: 512 [ 20.707832] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 [ 20.707840] monitor/mwait feature present. [ 20.707841] using mwait in idle threads. [ 20.707845] CPU: L1 I cache: 32K, L1 D cache: 32K [ 20.707847] CPU: L2 cache: 1024K [ 20.707849] CPU: Physical Processor ID: 0 [ 20.707851] CPU: Processor Core ID: 0 [ 20.707853] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 [ 20.707861] Compat vDSO mapped to ffffe000. [ 20.707873] Checking 'hlt' instruction... OK. [ 20.723791] SMP alternatives: switching to UP code [ 20.724163] Early unpacking initramfs... done [ 20.991770] ACPI: Core revision 20070126 [ 20.991818] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 21.016555] CPU0: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping 0d [ 21.016570] SMP alternatives: switching to SMP code [ 21.016648] Booting processor 1/1 eip 3000 [ 21.026705] Initializing CPU#1 [ 21.107301] Calibrating delay using timer specific routine.. 4011.95 BogoMIPS (lpj=8023906) [ 21.107307] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 [ 21.107311] monitor/mwait feature present. [ 21.107314] CPU: L1 I cache: 32K, L1 D cache: 32K [ 21.107315] CPU: L2 cache: 1024K [ 21.107317] CPU: Physical Processor ID: 0 [ 21.107318] CPU: Processor Core ID: 1 [ 21.107320] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 [ 21.107734] CPU1: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping 0d [ 21.107752] Total of 2 processors activated (8026.87 BogoMIPS). [ 21.107895] ENABLING IO-APIC IRQs [ 21.108064] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 21.255245] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 21.275241] Brought up 2 CPUs [ 21.401599] migration_cost=27 [ 21.401724] Booting paravirtualized kernel on bare hardware [ 21.401779] Time: 9:07:09 Date: 10/11/107 [ 21.401796] NET: Registered protocol family 16 [ 21.401871] EISA bus registered [ 21.401875] ACPI: bus type pci registered [ 21.402011] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 [ 21.402013] PCI: Using configuration type 1 [ 21.402014] Setting up standard PCI resources [ 21.406124] ACPI: EC: Look up EC in DSDT [ 21.411283] ACPI: Interpreter enabled [ 21.411286] ACPI: (supports S0 S1 S3 S4 S5) [ 21.411302] ACPI: Using IOAPIC for interrupt routing [ 21.418362] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 21.418377] PCI: Probing PCI hardware (bus 00) [ 21.419686] PCI: Transparent bridge - 0000:00:1e.0 [ 21.419745] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 21.419875] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 21.419950] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 21.420049] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 21.420123] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 21.420211] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 21.435324] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 21.435430] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 21.435534] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 21.435637] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 21.435740] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 21.435843] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 21.435946] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 21.436048] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 21.436141] Linux Plug and Play Support v0.97 (c) Adam Belay [ 21.436152] pnp: PnP ACPI init [ 21.436159] ACPI: bus type pnp registered [ 21.438678] pnp: PnP ACPI: found 15 devices [ 21.438681] ACPI: ACPI bus type pnp unregistered [ 21.438684] PnPBIOS: Disabled by ACPI PNP [ 21.438728] PCI: Using ACPI for IRQ routing [ 21.438730] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 21.449703] NET: Registered protocol family 8 [ 21.449705] NET: Registered protocol family 20 [ 21.449754] pnp: 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 21.449761] pnp: 00:07: ioport range 0x290-0x297 has been reserved [ 21.449765] pnp: 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 21.449768] pnp: 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved [ 21.449771] pnp: 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved [ 21.449773] pnp: 00:08: iomem range 0xffa00000-0xffafffff has been reserved [ 21.449778] pnp: 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved [ 21.449781] pnp: 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved [ 21.449786] pnp: 00:0d: iomem range 0xe0000000-0xefffffff has been reserved [ 21.449791] pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 21.449793] pnp: 00:0e: iomem range 0xc0000-0xcffff could not be reserved [ 21.449795] pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 21.449798] pnp: 00:0e: iomem range 0x100000-0x7fffffff could not be reserved [ 21.450982] Time: tsc clocksource has been installed. [ 21.450989] Switched to high resolution mode on CPU 0 [ 21.451069] Switched to high resolution mode on CPU 1 [ 21.480020] PCI: Bridge: 0000:00:01.0 [ 21.480022] IO window: d000-dfff [ 21.480026] MEM window: fe900000-fe9fffff [ 21.480029] PREFETCH window: f0000000-f7ffffff [ 21.480032] PCI: Bridge: 0000:00:1c.0 [ 21.480033] IO window: disabled. [ 21.480037] MEM window: disabled. [ 21.480040] PREFETCH window: fdf00000-fdffffff [ 21.480045] PCI: Bridge: 0000:00:1c.4 [ 21.480047] IO window: e000-efff [ 21.480051] MEM window: feb00000-febfffff [ 21.480054] PREFETCH window: disabled. [ 21.480058] PCI: Bridge: 0000:00:1c.5 [ 21.480059] IO window: disabled. [ 21.480064] MEM window: fea00000-feafffff [ 21.480067] PREFETCH window: disabled. [ 21.480071] PCI: Bridge: 0000:00:1e.0 [ 21.480072] IO window: disabled. [ 21.480076] MEM window: disabled. [ 21.480079] PREFETCH window: disabled. [ 21.480093] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 21.480098] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 21.480114] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 21.480118] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 21.480133] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17 [ 21.480137] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 21.480152] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16 [ 21.480156] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 21.480165] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 21.480176] NET: Registered protocol family 2 [ 21.526920] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 21.526998] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 21.527746] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 21.528021] TCP: Hash tables configured (established 131072 bind 65536) [ 21.528024] TCP reno registered [ 21.543043] checking if image is initramfs... it is [ 22.072480] Freeing initrd memory: 7131k freed [ 22.072983] audit: initializing netlink socket (disabled) [ 22.072998] audit(1194772029.180:1): initialized [ 22.073079] highmem bounce pool size: 64 pages [ 22.074655] VFS: Disk quotas dquot_6.5.1 [ 22.074695] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 22.074773] io scheduler noop registered [ 22.074775] io scheduler anticipatory registered [ 22.074777] io scheduler deadline registered [ 22.074788] io scheduler cfq registered (default) [ 22.074905] Boot video device is 0000:01:00.0 [ 22.074977] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 22.075009] assign_interrupt_mode Found MSI capability [ 22.075011] Allocate Port Service[0000:00:01.0:pcie00] [ 22.075080] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 22.075117] assign_interrupt_mode Found MSI capability [ 22.075119] Allocate Port Service[0000:00:1c.0:pcie00] [ 22.075143] Allocate Port Service[0000:00:1c.0:pcie02] [ 22.075212] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 22.075248] assign_interrupt_mode Found MSI capability [ 22.075250] Allocate Port Service[0000:00:1c.4:pcie00] [ 22.075277] Allocate Port Service[0000:00:1c.4:pcie02] [ 22.075344] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 22.075381] assign_interrupt_mode Found MSI capability [ 22.075383] Allocate Port Service[0000:00:1c.5:pcie00] [ 22.075407] Allocate Port Service[0000:00:1c.5:pcie02] [ 22.075534] isapnp: Scanning for PnP cards... [ 22.428142] isapnp: No Plug & Play device found [ 22.446271] Real Time Clock Driver v1.12ac [ 22.446439] hpet_resources: 0xfed00000 is busy [ 22.446478] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 22.446570] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 22.447171] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 22.447737] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 22.447840] input: Macintosh mouse button emulation as /class/input/input0 [ 22.447904] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 22.447906] PNP: PS/2 controller doesn't have AUX irq; using default 12 [ 22.450769] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 22.450773] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 22.450901] mice: PS/2 mouse device common for all mice [ 22.450993] EISA: Probing bus 0 at eisa.0 [ 22.451020] EISA: Detected 0 cards. [ 22.451190] TCP cubic registered [ 22.451206] NET: Registered protocol family 1 [ 22.451226] Using IPI No-Shortcut mode [ 22.451379] Magic number: 15:872:120 [ 22.451610] Freeing unused kernel memory: 364k freed [ 23.621608] AppArmor: AppArmor initialized<5>audit(1194772030.680:2): type=1505 info="AppArmor initialized" pid=1235 [ 23.626780] fuse init (API version 7.8) [ 23.630745] Failure registering capabilities with primary security module. [ 23.665142] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - C7, should be BE [20070126] [ 23.665150] ACPI: SSDT 7FF8E0D0, 0214 (r1 AMI CPU1PM 1 INTL 20060113) [ 23.665478] ACPI: SSDT 7FF8E2F0, 0143 (r1 AMI CPU2PM 1 INTL 20060113) [ 23.665655] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] [ 23.665664] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] [ 24.035335] usbcore: registered new interface driver usbfs [ 24.035362] usbcore: registered new interface driver hub [ 24.035381] usbcore: registered new device driver usb [ 24.036209] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 [ 24.036220] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 24.036223] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 24.036357] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 24.036384] ehci_hcd 0000:00:1a.7: debug port 1 [ 24.036390] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 24.036398] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe8ffc00 [ 24.040267] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 24.040363] usb usb1: configuration #1 chosen from 1 choice [ 24.040388] hub 1-0:1.0: USB hub found [ 24.040394] hub 1-0:1.0: 6 ports detected [ 24.040974] USB Universal Host Controller Interface driver v3.0 [ 24.084970] SCSI subsystem initialized [ 24.096114] libata version 2.21 loaded. [ 24.140645] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 24.140657] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 24.140661] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 24.140685] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2 [ 24.140712] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c800 [ 24.140793] usb usb2: configuration #1 chosen from 1 choice [ 24.140816] hub 2-0:1.0: USB hub found [ 24.140821] hub 2-0:1.0: 2 ports detected [ 24.145712] Floppy drive(s): fd0 is 1.44M [ 24.174664] FDC 0 is a post-1991 82077 [ 24.244583] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 19 [ 24.244595] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 24.244598] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 24.244622] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3 [ 24.244648] uhci_hcd 0000:00:1a.1: irq 19, io base 0x0000c880 [ 24.244730] usb usb3: configuration #1 chosen from 1 choice [ 24.244751] hub 3-0:1.0: USB hub found [ 24.244756] hub 3-0:1.0: 2 ports detected [ 24.348490] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 24.348500] PCI: Setting latency timer of device 0000:00:1a.2 to 64 [ 24.348503] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 24.348521] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4 [ 24.348543] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000cc00 [ 24.348621] usb usb4: configuration #1 chosen from 1 choice [ 24.348641] hub 4-0:1.0: USB hub found [ 24.348646] hub 4-0:1.0: 2 ports detected [ 24.452407] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20 [ 24.452416] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 24.452420] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 24.452438] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 24.452462] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000c080 [ 24.452538] usb usb5: configuration #1 chosen from 1 choice [ 24.452561] hub 5-0:1.0: USB hub found [ 24.452566] hub 5-0:1.0: 2 ports detected [ 24.556265] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 21 [ 24.556275] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 24.556279] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 24.556299] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 24.556323] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000c400 [ 24.556398] usb usb6: configuration #1 chosen from 1 choice [ 24.556420] hub 6-0:1.0: USB hub found [ 24.556425] hub 6-0:1.0: 2 ports detected [ 24.660160] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 24.660169] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 24.660172] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 24.660191] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 24.660213] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480 [ 24.660293] usb usb7: configuration #1 chosen from 1 choice [ 24.660314] hub 7-0:1.0: USB hub found [ 24.660319] hub 7-0:1.0: 2 ports detected [ 24.764504] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20 [ 24.764516] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 24.764520] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 24.764545] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8 [ 24.764573] ehci_hcd 0000:00:1d.7: debug port 1 [ 24.764579] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 24.764585] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfe8ff800 [ 24.803983] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 24.804084] usb usb8: configuration #1 chosen from 1 choice [ 24.804113] hub 8-0:1.0: USB hub found [ 24.804120] hub 8-0:1.0: 6 ports detected [ 24.909999] ata_piix 0000:00:1f.2: version 2.11 [ 24.910007] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 24.910038] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 22 [ 24.910066] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 24.910136] scsi0 : ata_piix [ 24.910182] scsi1 : ata_piix [ 24.910265] ata1: SATA max UDMA/133 cmd 0x0001b000 ctl 0x0001ac02 bmdma 0x0001a480 irq 22 [ 24.910268] ata2: SATA max UDMA/133 cmd 0x0001a880 ctl 0x0001a802 bmdma 0x0001a488 irq 22 [ 25.043699] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 25.072036] ata1.00: ATA-7: Hitachi HDT725032VLA360, V54OA7EA, max UDMA/133 [ 25.072041] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 25.088025] ata1.00: configured for UDMA/133 [ 25.233835] usb 2-2: configuration #1 chosen from 1 choice [ 25.475305] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 25.563400] ata2.00: ATAPI: Optiarc DVD RW AD-7173S, 1-00, max UDMA/66 [ 25.652476] usb 3-1: configuration #1 chosen from 1 choice [ 25.735238] ata2.00: configured for UDMA/66 [ 25.735344] scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72503 V54O PQ: 0 ANSI: 5 [ 25.736326] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7173S 1-00 PQ: 0 ANSI: 5 [ 25.736413] ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ] [ 25.736436] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 22 (level, low) -> IRQ 22 [ 25.736464] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 25.736497] scsi2 : ata_piix [ 25.736532] scsi3 : ata_piix [ 25.736615] ata3: SATA max UDMA/133 cmd 0x0001c000 ctl 0x0001bc02 bmdma 0x0001b480 irq 22 [ 25.736618] ata4: SATA max UDMA/133 cmd 0x0001b880 ctl 0x0001b802 bmdma 0x0001b488 irq 22 [ 25.901548] usb 3-2: new full speed USB device using uhci_hcd and address 3 [ 26.065428] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 26.065465] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 26.065500] scsi4 : pata_marvell [ 26.065545] scsi5 : pata_marvell [ 26.065570] ata5: PATA max UDMA/100 cmd 0x0001ec00 ctl 0x0001e882 bmdma 0x0001e400 irq 16 [ 26.065574] ata6: PATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e482 bmdma 0x0001e408 irq 16 [ 26.065595] BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:07 0D:00 0E:00 0F:00 [ 26.072894] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 26.072906] sd 0:0:0:0: [sda] Write Protect is off [ 26.072908] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 26.072921] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 26.072976] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 26.072984] sd 0:0:0:0: [sda] Write Protect is off [ 26.072986] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 26.072997] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 26.073001] sda: sda1 sda2 sda3 < sda5 > [ 26.118099] sd 0:0:0:0: [sda] Attached SCSI disk [ 26.121977] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 26.122094] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 26.123081] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 26.123086] Uniform CD-ROM driver Revision: 3.20 [ 26.123267] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 26.230539] BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:07 0D:00 0E:00 0F:00 [ 26.399669] Attempting manual resume [ 26.399672] swsusp: Resume From Partition 8:5 [ 26.399674] PM: Checking swsusp image. [ 26.399830] PM: Resume from disk failed. [ 26.411241] EXT3-fs: INFO: recovery required on readonly filesystem. [ 26.411244] EXT3-fs: write access will be enabled during recovery. [ 29.144669] kjournald starting. Commit interval 5 seconds [ 29.144683] EXT3-fs: recovery complete. [ 29.149221] EXT3-fs: mounted filesystem with ordered data mode. [ 31.099410] usb 3-2: configuration #1 chosen from 1 choice [ 31.102511] usbcore: registered new interface driver hiddev [ 31.116504] input: Logitech USB Receiver as /class/input/input1 [ 31.116512] input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.1-1 [ 31.146507] input: Logitech USB Receiver as /class/input/input2 [ 31.146528] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.1-1 [ 31.146538] usbcore: registered new interface driver usbhid [ 31.146540] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 34.066015] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 34.067240] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 34.116969] Linux agpgart interface v0.102 (c) Dave Jones [ 34.439987] input: PC Speaker as /class/input/input3 [ 34.484906] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 34.484918] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 34.484926] atl1 0000:02:00.0: version 2.0.7 [ 34.564184] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x0557 pid 0x2006 [ 34.564205] usbcore: registered new interface driver usblp [ 34.564207] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 34.749706] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 34.749726] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 34.958616] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 35.213763] lp: driver loaded but no devices found [ 35.254732] Adding 6080560k swap on /dev/sda5. Priority:-1 extents:1 across:6080560k [ 35.525372] EXT3 FS on sda2, internal journal [ 36.165647] No dock devices found. [ 36.261488] input: Power Button (FF) as /class/input/input4 [ 36.261507] ACPI: Power Button (FF) [PWRF] [ 36.261608] input: Power Button (CM) as /class/input/input5 [ 36.261621] ACPI: Power Button (CM) [PWRB] [ 37.324711] NET: Registered protocol family 10 [ 37.324805] lo: Disabled Privacy Extensions [ 37.479507] ppdev: user-space parallel port driver [ 37.585345] audit(1194768444.323:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5069 profile="/usr/sbin/cupsd" [ 37.711034] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 37.711039] apm: disabled - APM is not SMP safe. [ 38.177803] atl1 0000:02:00.0: Unable to enable MSI: -22 [ 38.177888] atl1 0000:02:00.0: eth0 link is up 100 Mbps full duplex [ 39.053610] Failure registering capabilities with primary security module. [ 39.439769] Bluetooth: Core ver 2.11 [ 39.439869] NET: Registered protocol family 31 [ 39.439872] Bluetooth: HCI device and connection manager initialized [ 39.439877] Bluetooth: HCI socket layer initialized [ 39.486607] Bluetooth: L2CAP ver 2.8 [ 39.486612] Bluetooth: L2CAP socket layer initialized [ 39.568453] Bluetooth: RFCOMM socket layer initialized [ 39.568468] Bluetooth: RFCOMM TTY layer initialized [ 39.568471] Bluetooth: RFCOMM ver 1.8 [ 41.219913] [drm] Initialized drm 1.1.0 20060810 [ 41.222940] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 41.223026] [drm] Initialized radeon 1.27.0 20060524 on minor 0 [ 43.461005] NET: Registered protocol family 17 [ 43.531633] [drm] Setting GART location based on new memory map [ 43.532179] [drm] Loading R300 Microcode [ 43.532219] [drm] writeback test succeeded in 1 usecs [ 55.100146] eth0: no IPv6 routers present