[   22.280295] /dev/vmmon[1290]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
[   22.280303] /dev/vmmon[1290]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
[   22.280306] /dev/vmmon[1290]: Module vmmon: initialized
[   22.994424] /dev/vmci[1298]: VMCI: Driver initialized.
[   22.994726] /dev/vmci[1298]: Module vmci: registered with major=10 minor=56
[   22.994734] /dev/vmci[1298]: Module vmci: initialized
[   24.119158] ioremap error for 0xbb7fe000-0xbb7ff000, requested 0x10, got 0x0
[   24.119166] ioremap error for 0xbb7fe000-0xbb7ff000, requested 0x10, got 0x0
[   24.119171] ioremap error for 0xbb7fe000-0xbb7ff000, requested 0x10, got 0x0
[   24.119175] ioremap error for 0xbb7fe000-0xbb7ff000, requested 0x10, got 0x0
[   24.119179] ioremap error for 0xbb7fe000-0xbb7ff000, requested 0x10, got 0x0
[   24.119183] ioremap error for 0xbb7e3000-0xbb7e4000, requested 0x10, got 0x0
[   24.818847] /dev/vmnet: open called by PID 1367 (vmnet-dhcpd)
[   24.818859] /dev/vmnet: hub 1 does not exist, allocating memory.
[   24.818887] /dev/vmnet: port on hub 1 successfully opened
[   24.838003] /dev/vmnet: open called by PID 1369 (vmnet-netifup)
[   24.838014] /dev/vmnet: port on hub 1 successfully opened
[   24.941866] /dev/vmnet: open called by PID 1374 (vmnet-dhcpd)
[   24.941887] /dev/vmnet: hub 8 does not exist, allocating memory.
[   24.941940] /dev/vmnet: port on hub 8 successfully opened
[   25.110983] /dev/vmnet: open called by PID 1378 (vmnet-natd)
[   25.111005] /dev/vmnet: port on hub 8 successfully opened
[   25.139746] /dev/vmnet: open called by PID 1379 (vmnet-netifup)
[   25.139765] /dev/vmnet: port on hub 8 successfully opened
[   34.129858] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
[   34.225110] EXT4-fs (sda3): re-mounted. Opts: commit=0
[   34.656077] WARNING! power/level is deprecated; use power/control instead
[   35.553955] vmnet1: no IPv6 routers present
[   35.986667] /dev/vmnet: open called by PID 1360 (vmnet-bridge)
[   35.986688] /dev/vmnet: hub 0 does not exist, allocating memory.
[   35.986745] /dev/vmnet: port on hub 0 successfully opened
[   35.986828] bridge-wlan0: device is wireless, enabling SMAC
[   35.986836] bridge-wlan0: up
[   35.987575] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   36.033018] vmnet8: no IPv6 routers present
[   36.063814] bridge-wlan0: attached
[   36.063933] bridge-wlan0: disabling the bridge
[   36.112836] bridge-wlan0: down
[   36.112845] bridge-wlan0: detached
[   40.300428] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   41.977366] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
[   41.979904] EXT4-fs (sda3): re-mounted. Opts: commit=0
[   42.152140] Easy slow down manager: checking for SABI support.
[   42.152207] Easy slow down manager: SABI is supported (f3692)
[   42.420821] usbcore: deregistering interface driver uvcvideo
[   46.116796] /dev/vmnet: open called by PID 1360 (vmnet-bridge)
[   46.116819] /dev/vmnet: hub 0 does not exist, allocating memory.
[   46.116848] /dev/vmnet: port on hub 0 successfully opened
[   46.116868] bridge-wlan1: device is wireless, enabling SMAC
[   46.116875] bridge-wlan1: up
[   46.117181] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   46.154020] bridge-wlan1: attached
[   46.154119] bridge-wlan1: disabling the bridge
[   46.213452] bridge-wlan1: down
[   46.213471] bridge-wlan1: detached
[   75.897719] wlan0: authenticate with 00:1d:4f:aa:2f:0d (try 1)
[   75.899329] wlan0: authenticated
[   75.899359] wlan0: associate with 00:1d:4f:aa:2f:0d (try 1)
[   75.901924] wlan0: RX AssocResp from 00:1d:4f:aa:2f:0d (capab=0x411 status=0 aid=2)
[   75.901934] wlan0: associated
[   75.908372] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   75.910336] /dev/vmnet: open called by PID 1360 (vmnet-bridge)
[   75.910360] /dev/vmnet: hub 0 does not exist, allocating memory.
[   75.910418] /dev/vmnet: port on hub 0 successfully opened
[   75.910447] bridge-wlan0: device is wireless, enabling SMAC
[   75.910455] bridge-wlan0: up
[   75.910462] bridge-wlan0: attached
[   86.356114] wlan0: no IPv6 routers present
[  107.719807] wlan1: authenticate with 00:1d:4f:aa:2f:0d (try 1)
[  107.916495] wlan1: authenticate with 00:1d:4f:aa:2f:0d (try 2)
[  107.920512] wlan1: authenticated
[  107.940943] wlan1: associate with 00:1d:4f:aa:2f:0d (try 1)
[  107.943394] wlan1: RX AssocResp from 00:1d:4f:aa:2f:0d (capab=0x411 status=0 aid=3)
[  107.943397] wlan1: associated
[  107.944000] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[  110.107600] wlan1: authenticate with 00:1d:4f:aa:2f:0d (try 1)
[  110.122334] wlan1: authenticated
[  110.122379] wlan1: associate with 00:1d:4f:aa:2f:0d (try 1)
[  110.129825] wlan1: RX AssocResp from 00:1d:4f:aa:2f:0d (capab=0x411 status=0 aid=3)
[  110.129832] wlan1: associated
[  112.282446] wlan1: authenticate with 00:1d:4f:aa:2f:0d (try 1)
[  112.475381] wlan1: authenticate with 00:1d:4f:aa:2f:0d (try 2)
[  112.478885] wlan1: authenticated
[  112.501363] wlan1: associate with 00:1d:4f:aa:2f:0d (try 1)
[  112.516030] wlan1: RX AssocResp from 00:1d:4f:aa:2f:0d (capab=0x411 status=0 aid=3)
[  112.516038] wlan1: associated
[  113.402883] wlan1: deauthenticating from 00:1d:4f:aa:2f:0d by local choice (reason=3)
[  118.271253] wlan1: no IPv6 routers present
[  256.362065] exe (6522): /proc/6522/oom_adj is deprecated, please use /proc/6522/oom_score_adj instead.
[ 1548.568313] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 2263.780157] ieee80211 phy0: wlan0: No probe response from AP 00:1d:4f:aa:2f:0d after 500ms, disconnecting.
[ 2263.806280] bridge-wlan0: disabling the bridge
[ 2263.939859] bridge-wlan0: down
[ 2263.939877] bridge-wlan0: detached
[ 2264.059758] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2264.059771] cfg80211: Restoring regulatory settings
[ 2264.059780] cfg80211: Calling CRDA to update world regulatory domain
[ 2264.789459] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[ 2264.789472] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 2264.789477] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2264.789480] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 2264.789484] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2264.789488] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 2264.789492] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2264.789495] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 2264.789499] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2264.789502] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 2264.789506] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2264.789509] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 2264.789513] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2264.789517] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 2264.789521] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2264.789524] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 2264.789528] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2264.789531] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 2264.789535] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2264.789538] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 2264.789542] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2264.789545] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 2264.789549] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2264.789552] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 2264.789556] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2264.789559] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 2264.789564] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2264.789567] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 2264.789571] cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2264.789575] cfg80211: World regulatory domain updated:
[ 2264.789577] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2264.789581] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2264.789585] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2264.789588] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2264.789592] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2264.789596] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2267.075014] wlan0: authenticate with 00:1d:4f:aa:2f:0d (try 1)
[ 2267.076649] wlan0: authenticated
[ 2267.274791] wlan0: associate with 00:1d:4f:aa:2f:0d (try 1)
[ 2267.277264] wlan0: RX AssocResp from 00:1d:4f:aa:2f:0d (capab=0x411 status=0 aid=2)
[ 2267.277268] wlan0: associated
[ 2267.330420] wlan0: deauthenticating from 00:1d:4f:aa:2f:0d by local choice (reason=3)
[ 2267.333077] /dev/vmnet: open called by PID 1360 (vmnet-bridge)
[ 2267.333093] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 2267.333125] /dev/vmnet: port on hub 0 successfully opened
[ 2267.333148] bridge-wlan0: device is wireless, enabling SMAC
[ 2267.333153] bridge-wlan0: up
[ 2267.564534] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2267.564544] cfg80211: Restoring regulatory settings
[ 2267.564553] cfg80211: Calling CRDA to update world regulatory domain
[ 2267.570935] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[ 2267.570949] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 2267.570956] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2267.570961] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 2267.570967] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2267.570972] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 2267.570978] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2267.570982] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 2267.570988] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2267.570993] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 2267.570998] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2267.571003] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 2267.571009] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2267.571013] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 2267.571019] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2267.571024] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 2267.571029] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2267.571034] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 2267.571040] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2267.571044] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 2267.571050] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2267.571054] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 2267.571060] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2267.571065] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 2267.571071] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2267.571075] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 2267.571081] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2267.571086] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 2267.571091] cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2267.571097] cfg80211: World regulatory domain updated:
[ 2267.571100] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2267.571106] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2267.571111] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2267.571117] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2267.571122] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2267.571128] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2267.757850] bridge-wlan0: attached
[ 2267.757956] bridge-wlan0: disabling the bridge
[ 2267.822397] bridge-wlan0: down
[ 2267.822412] bridge-wlan0: detached
[ 2267.822523] /dev/vmnet: open called by PID 1360 (vmnet-bridge)
[ 2267.822541] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 2267.822583] /dev/vmnet: port on hub 0 successfully opened
[ 2271.738452] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2271.739580] bridge-wlan0: enabling the bridge on dev up
[ 2271.739593] bridge-wlan0: device is wireless, enabling SMAC
[ 2271.739603] bridge-wlan0: up
[ 2271.739615] bridge-wlan0: attached
[ 2271.739735] bridge-wlan0: disabling the bridge
[ 2271.794682] bridge-wlan0: down
[ 2271.794700] bridge-wlan0: detached
[ 2272.782853] sky2 0000:07:00.0: eth0: disabling interface
[ 2272.796515] sky2 0000:07:00.0: eth0: enabling interface
[ 2272.800037] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2274.700438] wlan0: authenticate with 00:1d:4f:aa:2f:0d (try 1)
[ 2274.702482] wlan0: authenticated
[ 2274.900313] wlan0: associate with 00:1d:4f:aa:2f:0d (try 1)
[ 2274.902264] wlan0: RX AssocResp from 00:1d:4f:aa:2f:0d (capab=0x411 status=0 aid=2)
[ 2274.902272] wlan0: associated
[ 2274.908866] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2274.910083] /dev/vmnet: open called by PID 1360 (vmnet-bridge)
[ 2274.910107] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 2274.910170] /dev/vmnet: port on hub 0 successfully opened
[ 2274.910191] bridge-wlan0: device is wireless, enabling SMAC
[ 2274.910201] bridge-wlan0: up
[ 2274.910209] bridge-wlan0: attached
[ 2285.398450] wlan0: no IPv6 routers present
[ 2493.903112] wlan0: deauthenticating from 00:1d:4f:aa:2f:0d by local choice (reason=3)
[ 2493.977754] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2493.977766] cfg80211: Restoring regulatory settings
[ 2493.977776] cfg80211: Calling CRDA to update world regulatory domain
[ 2493.979128] bridge-wlan0: disabling the bridge
[ 2493.985175] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[ 2493.985189] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 2493.985196] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2493.985201] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 2493.985207] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2493.985212] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 2493.985218] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2493.985222] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 2493.985228] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2493.985233] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 2493.985238] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2493.985243] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 2493.985249] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2493.985253] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 2493.985259] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2493.985263] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 2493.985269] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2493.985274] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 2493.985280] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2493.985284] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 2493.985290] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2493.985294] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 2493.985300] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2493.985305] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 2493.985310] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2493.985315] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 2493.985321] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2493.985325] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 2493.985331] cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (300 mBi, 2000 mBm)
[ 2493.985337] cfg80211: World regulatory domain updated:
[ 2493.985340] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2493.985345] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2493.985351] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2493.985357] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2493.985362] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2493.985368] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2494.046569] bridge-wlan0: down
[ 2494.046585] bridge-wlan0: detached
[ 2494.046707] /dev/vmnet: open called by PID 1360 (vmnet-bridge)
[ 2494.046726] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 2494.046768] /dev/vmnet: port on hub 0 successfully opened
[ 2494.046786] bridge-wlan0: device is wireless, enabling SMAC
[ 2494.046792] bridge-wlan0: up
[ 2494.046800] bridge-wlan0: attached
[ 2494.046851] bridge-wlan0: disabling the bridge
[ 2494.096433] bridge-wlan0: down
[ 2494.096447] bridge-wlan0: detached
[ 2532.414382] wlan0: authenticate with 00:1d:4f:aa:2f:0d (try 1)
[ 2532.416186] wlan0: authenticated
[ 2532.623790] wlan0: associate with 00:1d:4f:aa:2f:0d (try 1)
[ 2532.626260] wlan0: RX AssocResp from 00:1d:4f:aa:2f:0d (capab=0x411 status=0 aid=2)
[ 2532.626266] wlan0: associated
[ 2532.634327] /dev/vmnet: open called by PID 1360 (vmnet-bridge)
[ 2532.634353] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 2532.634402] /dev/vmnet: port on hub 0 successfully opened
[ 2532.634415] bridge-wlan0: device is wireless, enabling SMAC
[ 2532.634419] bridge-wlan0: up
[ 2532.634424] bridge-wlan0: attached