[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-8-generic (buildd@allspice) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:24 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.38-8-generic root=/dev/mapper/akira-root ro quiet splash vt.handoff=7 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fee0000 (usable) [ 0.000000] BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data) [ 0.000000] BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: System manufacturer System name/A8V-E DELUXE, BIOS ASUS A8V-E DELUXE ACPI BIOS Revision 1008 06/24/2005 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] AGP bridge at 00:00:00 [ 0.000000] Aperture from AGP @ c0000000 old size 32 MB [ 0.000000] Aperture from AGP @ c0000000 size 128 MB (APSIZE f20) [ 0.000000] last_pfn = 0x3fee0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 base 003FF00000 mask FFFFF00000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [ffff8800000f5ad0] f5ad0 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000003fee0000 [ 0.000000] 0000000000 - 003fe00000 page 2M [ 0.000000] 003fe00000 - 003fee0000 page 4k [ 0.000000] kernel direct mapping tables up to 3fee0000 @ 1fffd000-20000000 [ 0.000000] RAMDISK: 359b4000 - 36cd2000 [ 0.000000] ACPI: RSDP 00000000000f7bc0 00014 (v00 K8T890) [ 0.000000] ACPI: RSDT 000000003fee3040 00030 (v01 K8T890 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 000000003fee30c0 00074 (v01 K8T890 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 000000003fee3180 0753D (v01 K8T890 AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 000000003fee0000 00040 [ 0.000000] ACPI: MCFG 000000003feea7c0 0003C (v01 K8T890 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 000000003feea700 00066 (v01 K8T890 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000003fee0000 [ 0.000000] Initmem setup node 0 0000000000000000-000000003fee0000 [ 0.000000] NODE_DATA [000000003fedb000 - 000000003fedffff] [ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003e600000-ffff88003f3fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003fee0 [ 0.000000] On node 0 totalpages: 261743 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3921 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3525 pages used for memmap [ 0.000000] DMA32 zone: 254235 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 64 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:a0100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88003fc00000 s84416 r8192 d22080 u2097152 [ 0.000000] pcpu-alloc: s84416 r8192 d22080 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 258156 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.38-8-generic root=/dev/mapper/akira-root ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] AGP bridge at 00:00:00 [ 0.000000] Aperture from AGP @ c0000000 old size 32 MB [ 0.000000] Aperture from AGP @ c0000000 size 128 MB (APSIZE f20) [ 0.000000] Node 0: aperture @ fec0000000 size 128 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 999508k/1047424k available (5940k kernel code, 452k absent, 47464k reserved, 5017k data, 956k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:16640 nr_irqs:256 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 10485760 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1979.786 MHz processor. [ 0.020003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3959.57 BogoMIPS (lpj=19797860) [ 0.020008] pid_max: default: 32768 minimum: 301 [ 0.020040] Security Framework initialized [ 0.020063] AppArmor: AppArmor initialized [ 0.020064] Yama: becoming mindful. [ 0.020237] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.020891] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.021175] Mount-cache hash table entries: 256 [ 0.021324] Initializing cgroup subsys ns [ 0.021328] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.021332] Initializing cgroup subsys cpuacct [ 0.021337] Initializing cgroup subsys memory [ 0.021349] Initializing cgroup subsys devices [ 0.021351] Initializing cgroup subsys freezer [ 0.021354] Initializing cgroup subsys net_cls [ 0.021356] Initializing cgroup subsys blkio [ 0.021393] tseg: 003ff00000 [ 0.021395] mce: CPU supports 5 MCE banks [ 0.021433] SMP alternatives: switching to UP code [ 0.033987] Freeing SMP alternatives: 20k freed [ 0.034008] ACPI: Core revision 20110112 [ 0.038040] ftrace: allocating 24314 entries in 96 pages [ 0.040100] Setting APIC routing to flat [ 0.040939] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.145781] CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 00 [ 0.150000] Performance Events: AMD PMU driver. [ 0.150000] ... version: 0 [ 0.150000] ... bit width: 48 [ 0.150000] ... generic registers: 4 [ 0.150000] ... value mask: 0000ffffffffffff [ 0.150000] ... max period: 00007fffffffffff [ 0.150000] ... fixed-purpose events: 0 [ 0.150000] ... event mask: 000000000000000f [ 0.150000] Brought up 1 CPUs [ 0.150000] Total of 1 processors activated (3959.57 BogoMIPS). [ 0.150000] devtmpfs: initialized [ 0.150000] print_constraints: dummy: [ 0.150000] Time: 4:34:41 Date: 06/11/11 [ 0.150000] NET: Registered protocol family 16 [ 0.150000] node 0 link 0: io port [1000, fffff] [ 0.150000] TOM: 0000000040000000 aka 1024M [ 0.150000] node 0 link 0: mmio [a0000, bffff] [ 0.150000] node 0 link 0: mmio [40000000, ff70ffff] [ 0.150000] bus: [00, ff] on node 0 link 0 [ 0.150000] bus: 00 index 0 [io 0x0000-0xffff] [ 0.150000] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.150000] bus: 00 index 2 [mem 0x40000000-0xfcffffffff] [ 0.150000] ACPI: bus type pci registered [ 0.150000] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.150000] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.161439] PCI: Using configuration type 1 for base access [ 0.162383] bio: create slab at 0 [ 0.163428] ACPI: EC: Look up EC in DSDT [ 0.164725] ACPI: Actual Package length (6) is larger than NumElements field (2), truncated [ 0.164729] [ 0.169111] ACPI: Interpreter enabled [ 0.169118] ACPI: (supports S0 S1 S3 S4 S5) [ 0.169142] ACPI: Using IOAPIC for interrupt routing [ 0.174050] ACPI: No dock devices found. [ 0.174053] HEST: Table not found. [ 0.174057] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.174122] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.174245] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.174248] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.174252] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.174255] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) [ 0.174258] pci_root PNP0A08:00: host bridge window [mem 0x3fff0000-0xfebfffff] (ignored) [ 0.174276] pci 0000:00:00.0: [1106:0238] type 0 class 0x000600 [ 0.174286] pci 0000:00:00.0: reg 10: [mem 0xc0000000-0xc7ffffff pref] [ 0.174346] pci 0000:00:00.1: [1106:1238] type 0 class 0x000600 [ 0.174382] pci 0000:00:00.2: [1106:2238] type 0 class 0x000600 [ 0.174418] pci 0000:00:00.3: [1106:3238] type 0 class 0x000600 [ 0.174454] pci 0000:00:00.4: [1106:4238] type 0 class 0x000600 [ 0.174490] pci 0000:00:00.5: [1106:5238] type 0 class 0x000800 [ 0.174542] pci 0000:00:00.7: [1106:7238] type 0 class 0x000600 [ 0.174580] pci 0000:00:01.0: [1106:b188] type 1 class 0x000604 [ 0.174628] pci 0000:00:02.0: [1106:a238] type 1 class 0x000604 [ 0.174677] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.174682] pci 0000:00:02.0: PME# disabled [ 0.174705] pci 0000:00:03.0: [1106:c238] type 1 class 0x000604 [ 0.174754] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.174758] pci 0000:00:03.0: PME# disabled [ 0.174779] pci 0000:00:03.1: [1106:d238] type 1 class 0x000604 [ 0.174828] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold [ 0.174833] pci 0000:00:03.1: PME# disabled [ 0.174854] pci 0000:00:03.2: [1106:e238] type 1 class 0x000604 [ 0.174903] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.174907] pci 0000:00:03.2: PME# disabled [ 0.174929] pci 0000:00:03.3: [1106:f238] type 1 class 0x000604 [ 0.174978] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold [ 0.174982] pci 0000:00:03.3: PME# disabled [ 0.175011] pci 0000:00:07.0: [11ab:1fa7] type 0 class 0x000200 [ 0.175028] pci 0000:00:07.0: reg 10: [mem 0xd3010000-0xd301ffff] [ 0.175038] pci 0000:00:07.0: reg 14: [mem 0xd3000000-0xd300ffff] [ 0.175107] pci 0000:00:08.0: [104c:8023] type 0 class 0x000c00 [ 0.175122] pci 0000:00:08.0: reg 10: [mem 0xd3025000-0xd30257ff] [ 0.175131] pci 0000:00:08.0: reg 14: [mem 0xd3020000-0xd3023fff] [ 0.175178] pci 0000:00:08.0: supports D1 D2 [ 0.175181] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot [ 0.175185] pci 0000:00:08.0: PME# disabled [ 0.175203] pci 0000:00:0b.0: [10b7:9200] type 0 class 0x000200 [ 0.175217] pci 0000:00:0b.0: reg 10: [io 0xb000-0xb07f] [ 0.175225] pci 0000:00:0b.0: reg 14: [mem 0xd3024000-0xd302407f] [ 0.175257] pci 0000:00:0b.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.175273] pci 0000:00:0b.0: supports D1 D2 [ 0.175275] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.175279] pci 0000:00:0b.0: PME# disabled [ 0.175302] pci 0000:00:0f.0: [1106:3149] type 0 class 0x000104 [ 0.175317] pci 0000:00:0f.0: reg 10: [io 0xb400-0xb407] [ 0.175326] pci 0000:00:0f.0: reg 14: [io 0xb800-0xb803] [ 0.175335] pci 0000:00:0f.0: reg 18: [io 0xbc00-0xbc07] [ 0.175343] pci 0000:00:0f.0: reg 1c: [io 0xc000-0xc003] [ 0.175352] pci 0000:00:0f.0: reg 20: [io 0xc400-0xc40f] [ 0.175361] pci 0000:00:0f.0: reg 24: [io 0xc800-0xc8ff] [ 0.175399] pci 0000:00:0f.1: [1106:0571] type 0 class 0x000101 [ 0.175438] pci 0000:00:0f.1: reg 20: [io 0xcc00-0xcc0f] [ 0.175488] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03 [ 0.175525] pci 0000:00:10.0: reg 20: [io 0xd000-0xd01f] [ 0.175552] pci 0000:00:10.0: supports D1 D2 [ 0.175554] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.175558] pci 0000:00:10.0: PME# disabled [ 0.175574] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03 [ 0.175612] pci 0000:00:10.1: reg 20: [io 0xd400-0xd41f] [ 0.175638] pci 0000:00:10.1: supports D1 D2 [ 0.175641] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.175645] pci 0000:00:10.1: PME# disabled [ 0.175661] pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03 [ 0.175698] pci 0000:00:10.2: reg 20: [io 0xd800-0xd81f] [ 0.175725] pci 0000:00:10.2: supports D1 D2 [ 0.175727] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.175731] pci 0000:00:10.2: PME# disabled [ 0.175747] pci 0000:00:10.3: [1106:3038] type 0 class 0x000c03 [ 0.175784] pci 0000:00:10.3: reg 20: [io 0xdc00-0xdc1f] [ 0.175811] pci 0000:00:10.3: supports D1 D2 [ 0.175814] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.175818] pci 0000:00:10.3: PME# disabled [ 0.175834] pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03 [ 0.175848] pci 0000:00:10.4: reg 10: [mem 0xd3026000-0xd30260ff] [ 0.175898] pci 0000:00:10.4: supports D1 D2 [ 0.175901] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.175905] pci 0000:00:10.4: PME# disabled [ 0.175924] pci 0000:00:11.0: [1106:3227] type 0 class 0x000601 [ 0.175977] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.175982] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices [ 0.176016] pci 0000:00:11.5: [1106:3059] type 0 class 0x000401 [ 0.176030] pci 0000:00:11.5: reg 10: [io 0xe000-0xe0ff] [ 0.176084] pci 0000:00:11.5: supports D1 D2 [ 0.176101] pci 0000:00:11.6: [1106:3068] type 0 class 0x000780 [ 0.176116] pci 0000:00:11.6: reg 10: [io 0x0000-0x00ff] [ 0.176187] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 [ 0.176207] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 [ 0.176224] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 [ 0.176241] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 [ 0.176264] PCI: peer root bus 00 res updated from pci conf [ 0.176310] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.176315] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.176319] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.176324] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.176371] pci 0000:02:00.0: [1002:5b60] type 0 class 0x000300 [ 0.176383] pci 0000:02:00.0: reg 10: [mem 0xc8000000-0xcfffffff pref] [ 0.176392] pci 0000:02:00.0: reg 14: [io 0xa000-0xa0ff] [ 0.176401] pci 0000:02:00.0: reg 18: [mem 0xd1000000-0xd100ffff] [ 0.176429] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.176449] pci 0000:02:00.0: supports D1 D2 [ 0.176473] pci 0000:02:00.1: [1002:5b70] type 0 class 0x000380 [ 0.176484] pci 0000:02:00.1: reg 10: [mem 0xd1010000-0xd101ffff] [ 0.176539] pci 0000:02:00.1: supports D1 D2 [ 0.176555] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.176566] pci 0000:00:02.0: PCI bridge to [bus 02-02] [ 0.176571] pci 0000:00:02.0: bridge window [io 0xa000-0xafff] [ 0.176575] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xd1ffffff] [ 0.176580] pci 0000:00:02.0: bridge window [mem 0xc8000000-0xcfffffff pref] [ 0.176618] pci 0000:00:03.0: PCI bridge to [bus 03-03] [ 0.176622] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.176627] pci 0000:00:03.0: bridge window [mem 0x00000000-0x000fffff] (disabled) [ 0.176631] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.176667] pci 0000:00:03.1: PCI bridge to [bus 04-04] [ 0.176672] pci 0000:00:03.1: bridge window [io 0xf000-0x0000] (disabled) [ 0.176676] pci 0000:00:03.1: bridge window [mem 0x00000000-0x000fffff] (disabled) [ 0.176681] pci 0000:00:03.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.176717] pci 0000:00:03.2: PCI bridge to [bus 05-05] [ 0.176721] pci 0000:00:03.2: bridge window [io 0xf000-0x0000] (disabled) [ 0.176726] pci 0000:00:03.2: bridge window [mem 0x00000000-0x000fffff] (disabled) [ 0.176731] pci 0000:00:03.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.176766] pci 0000:00:03.3: PCI bridge to [bus 06-06] [ 0.176771] pci 0000:00:03.3: bridge window [io 0xf000-0x0000] (disabled) [ 0.176775] pci 0000:00:03.3: bridge window [mem 0x00000000-0x000fffff] (disabled) [ 0.176780] pci 0000:00:03.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.176807] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.177051] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXG._PRT] [ 0.177092] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.177125] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 0.177159] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 0.177192] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 0.177226] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.222290] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12) *5 [ 0.222379] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 *12) [ 0.222469] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12) [ 0.222543] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.222615] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.222680] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.222744] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.222820] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 6 7 10 11 12) [ 0.222912] ACPI: PCI Interrupt Link [ALKA] (IRQs *20) [ 0.222994] ACPI: PCI Interrupt Link [ALKB] (IRQs *21) [ 0.223075] ACPI: PCI Interrupt Link [ALKC] (IRQs *22) [ 0.223179] ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled. [ 0.223299] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.223303] vgaarb: loaded [ 0.223508] SCSI subsystem initialized [ 0.223583] libata version 3.00 loaded. [ 0.223635] usbcore: registered new interface driver usbfs [ 0.223647] usbcore: registered new interface driver hub [ 0.223673] usbcore: registered new device driver usb [ 0.223784] wmi: Mapper loaded [ 0.223786] PCI: Using ACPI for IRQ routing [ 0.223789] PCI: pci_cache_line_size set to 64 bytes [ 0.223894] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.223900] reserve RAM buffer: 000000003fee0000 - 000000003fffffff [ 0.224005] NetLabel: Initializing [ 0.224007] NetLabel: domain hash size = 128 [ 0.224008] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.224021] NetLabel: unlabeled traffic allowed by default [ 0.232008] AppArmor: AppArmor Filesystem Enabled [ 0.232047] pnp: PnP ACPI init [ 0.232068] ACPI: bus type pnp registered [ 0.232187] pnp 00:00: [bus 00-ff] [ 0.232190] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.232193] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.232199] pnp 00:00: [io 0x0d00-0xffff window] [ 0.232202] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.232204] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.232207] pnp 00:00: [mem 0x3fff0000-0xfebfffff window] [ 0.232267] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.232291] pnp 00:01: [io 0x4000-0x407f] [ 0.232293] pnp 00:01: [io 0x5000-0x500f] [ 0.232364] system 00:01: [io 0x4000-0x407f] has been reserved [ 0.232368] system 00:01: [io 0x5000-0x500f] has been reserved [ 0.232371] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.232984] pnp 00:02: [io 0x0010-0x001f] [ 0.232986] pnp 00:02: [io 0x0022-0x003f] [ 0.232989] pnp 00:02: [io 0x0044-0x005f] [ 0.232991] pnp 00:02: [io 0x0062-0x0063] [ 0.232993] pnp 00:02: [io 0x0065-0x006f] [ 0.232996] pnp 00:02: [io 0x0074-0x007f] [ 0.232998] pnp 00:02: [io 0x0091-0x0093] [ 0.233000] pnp 00:02: [io 0x00a2-0x00bf] [ 0.233002] pnp 00:02: [io 0x00e0-0x00ef] [ 0.233005] pnp 00:02: [io 0x0b78-0x0b7b] [ 0.233007] pnp 00:02: [io 0x0f78-0x0f7b] [ 0.233010] pnp 00:02: [io 0x0a78-0x0a7b] [ 0.233012] pnp 00:02: [io 0x0e78-0x0e7b] [ 0.233014] pnp 00:02: [io 0x0bbc-0x0bbf] [ 0.233017] pnp 00:02: [io 0x0fbc-0x0fbf] [ 0.233019] pnp 00:02: [io 0x04d0-0x04d1] [ 0.233021] pnp 00:02: [io 0x0290-0x0297] [ 0.233058] pnp 00:02: disabling [io 0x0010-0x001f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.233062] pnp 00:02: disabling [io 0x0022-0x003f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.233066] pnp 00:02: disabling [io 0x0044-0x005f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.233070] pnp 00:02: disabling [io 0x0062-0x0063] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.233074] pnp 00:02: disabling [io 0x0065-0x006f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.233077] pnp 00:02: disabling [io 0x0074-0x007f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.233081] pnp 00:02: disabling [io 0x0091-0x0093] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.233085] pnp 00:02: disabling [io 0x00a2-0x00bf] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.233089] pnp 00:02: disabling [io 0x00e0-0x00ef] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.233136] system 00:02: [io 0x0b78-0x0b7b] has been reserved [ 0.233139] system 00:02: [io 0x0f78-0x0f7b] has been reserved [ 0.233142] system 00:02: [io 0x0a78-0x0a7b] has been reserved [ 0.233145] system 00:02: [io 0x0e78-0x0e7b] has been reserved [ 0.233148] system 00:02: [io 0x0bbc-0x0bbf] has been reserved [ 0.233152] system 00:02: [io 0x0fbc-0x0fbf] has been reserved [ 0.233155] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.233158] system 00:02: [io 0x0290-0x0297] has been reserved [ 0.233162] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.233176] pnp 00:03: [dma 4] [ 0.233178] pnp 00:03: [io 0x0000-0x000f] [ 0.233181] pnp 00:03: [io 0x0080-0x0090] [ 0.233183] pnp 00:03: [io 0x0094-0x009f] [ 0.233185] pnp 00:03: [io 0x00c0-0x00df] [ 0.233219] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.233232] pnp 00:04: [io 0x0070-0x0073] [ 0.233245] pnp 00:04: [irq 8] [ 0.233282] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.233292] pnp 00:05: [io 0x0061] [ 0.233327] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.233337] pnp 00:06: [io 0x00f0-0x00ff] [ 0.233343] pnp 00:06: [irq 13] [ 0.233378] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.233606] pnp 00:07: [io 0x03f8-0x03ff] [ 0.233612] pnp 00:07: [irq 4] [ 0.233681] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.234110] pnp 00:08: [io 0x0378-0x037f] [ 0.234113] pnp 00:08: [io 0x0778-0x077b] [ 0.234118] pnp 00:08: [irq 7] [ 0.234121] pnp 00:08: [dma 3] [ 0.234189] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.234231] pnp 00:09: [io 0x0060] [ 0.234234] pnp 00:09: [io 0x0064] [ 0.234239] pnp 00:09: [irq 1] [ 0.234280] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.234499] pnp 00:0a: [io 0x0201-0x0207] [ 0.234502] pnp 00:0a: [io 0x0200] [ 0.234548] pnp 00:0a: Plug and Play ACPI device, IDs PNPb02f (active) [ 0.234718] pnp 00:0b: [io 0x0330-0x0331] [ 0.234724] pnp 00:0b: [irq 10] [ 0.234784] pnp 00:0b: Plug and Play ACPI device, IDs PNPb006 (active) [ 0.234805] pnp 00:0c: [mem 0xe0000000-0xefffffff] [ 0.234866] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved [ 0.234870] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.235025] pnp 00:0d: [mem 0x000d0800-0x000d3fff] [ 0.235028] pnp 00:0d: [mem 0x000f0000-0x000f7fff] [ 0.235031] pnp 00:0d: [mem 0x000f8000-0x000fbfff] [ 0.235033] pnp 00:0d: [mem 0x000fc000-0x000fffff] [ 0.235036] pnp 00:0d: [mem 0x3fef0000-0x3ffeffff] [ 0.235038] pnp 00:0d: [mem 0x3fee0000-0x3fefffff] [ 0.235041] pnp 00:0d: [mem 0xffff0000-0xffffffff] [ 0.235046] pnp 00:0d: [mem 0x00000000-0x0009ffff] [ 0.235049] pnp 00:0d: [mem 0x00100000-0x3fedffff] [ 0.235051] pnp 00:0d: [mem 0xfec00000-0xfec00fff] [ 0.235054] pnp 00:0d: [mem 0xfee00000-0xfee00fff] [ 0.235056] pnp 00:0d: [mem 0xfff80000-0xfffeffff] [ 0.235127] system 00:0d: [mem 0x000d0800-0x000d3fff] has been reserved [ 0.235131] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.235134] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.235138] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.235141] system 00:0d: [mem 0x3fef0000-0x3ffeffff] could not be reserved [ 0.235145] system 00:0d: [mem 0x3fee0000-0x3fefffff] could not be reserved [ 0.235148] system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved [ 0.235152] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.235155] system 00:0d: [mem 0x00100000-0x3fedffff] could not be reserved [ 0.235159] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.235162] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.235165] system 00:0d: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.235169] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.235180] pnp: PnP ACPI: found 14 devices [ 0.235182] ACPI: ACPI bus type pnp unregistered [ 0.241656] Switching to clocksource acpi_pm [ 0.241722] pci 0000:00:0b.0: BAR 6: assigned [mem 0x40000000-0x4001ffff pref] [ 0.241727] pci 0000:00:11.6: BAR 0: assigned [io 0x1000-0x10ff] [ 0.241733] pci 0000:00:11.6: BAR 0: set to [io 0x1000-0x10ff] (PCI address [0x1000-0x10ff]) [ 0.241737] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.241739] pci 0000:00:01.0: bridge window [io disabled] [ 0.241744] pci 0000:00:01.0: bridge window [mem disabled] [ 0.241747] pci 0000:00:01.0: bridge window [mem pref disabled] [ 0.241755] pci 0000:02:00.0: BAR 6: assigned [mem 0xd0000000-0xd001ffff pref] [ 0.241758] pci 0000:00:02.0: PCI bridge to [bus 02-02] [ 0.241762] pci 0000:00:02.0: bridge window [io 0xa000-0xafff] [ 0.241767] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xd1ffffff] [ 0.241772] pci 0000:00:02.0: bridge window [mem 0xc8000000-0xcfffffff pref] [ 0.241778] pci 0000:00:03.0: PCI bridge to [bus 03-03] [ 0.241780] pci 0000:00:03.0: bridge window [io disabled] [ 0.241785] pci 0000:00:03.0: bridge window [mem disabled] [ 0.241789] pci 0000:00:03.0: bridge window [mem pref disabled] [ 0.241795] pci 0000:00:03.1: PCI bridge to [bus 04-04] [ 0.241797] pci 0000:00:03.1: bridge window [io disabled] [ 0.241802] pci 0000:00:03.1: bridge window [mem disabled] [ 0.241806] pci 0000:00:03.1: bridge window [mem pref disabled] [ 0.241812] pci 0000:00:03.2: PCI bridge to [bus 05-05] [ 0.241814] pci 0000:00:03.2: bridge window [io disabled] [ 0.241819] pci 0000:00:03.2: bridge window [mem disabled] [ 0.241823] pci 0000:00:03.2: bridge window [mem pref disabled] [ 0.241829] pci 0000:00:03.3: PCI bridge to [bus 06-06] [ 0.241831] pci 0000:00:03.3: bridge window [io disabled] [ 0.241836] pci 0000:00:03.3: bridge window [mem disabled] [ 0.241840] pci 0000:00:03.3: bridge window [mem pref disabled] [ 0.241853] pci 0000:00:01.0: setting latency timer to 64 [ 0.241874] pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27 [ 0.241879] pci 0000:00:02.0: setting latency timer to 64 [ 0.241889] pci 0000:00:03.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31 [ 0.241894] pci 0000:00:03.0: setting latency timer to 64 [ 0.241904] pci 0000:00:03.1: PCI INT B -> GSI 35 (level, low) -> IRQ 35 [ 0.241909] pci 0000:00:03.1: setting latency timer to 64 [ 0.241919] pci 0000:00:03.2: PCI INT C -> GSI 39 (level, low) -> IRQ 39 [ 0.241926] pci 0000:00:03.2: setting latency timer to 64 [ 0.241936] pci 0000:00:03.3: PCI INT D -> GSI 43 (level, low) -> IRQ 43 [ 0.241941] pci 0000:00:03.3: setting latency timer to 64 [ 0.241945] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.241948] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] [ 0.241951] pci_bus 0000:00: resource 6 [mem 0x40000000-0xfcffffffff] [ 0.241954] pci_bus 0000:02: resource 0 [io 0xa000-0xafff] [ 0.241957] pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd1ffffff] [ 0.241960] pci_bus 0000:02: resource 2 [mem 0xc8000000-0xcfffffff pref] [ 0.242004] NET: Registered protocol family 2 [ 0.242102] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.242686] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.243931] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.244503] TCP: Hash tables configured (established 131072 bind 65536) [ 0.244506] TCP reno registered [ 0.244524] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.244541] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.244641] NET: Registered protocol family 1 [ 0.244670] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.244675] pci 0000:00:02.0: MSI quirk detected; subordinate MSI disabled [ 0.244790] pci 0000:02:00.0: Boot video device [ 0.244796] PCI: CLS 32 bytes, default 64 [ 0.244901] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0238] [ 0.248354] Switched to NOHz mode on CPU #0 [ 0.248438] Trying to unpack rootfs image as initramfs... [ 0.260102] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xc0000000 [ 0.260445] audit: initializing netlink socket (disabled) [ 0.260457] type=2000 audit(1307766880.259:1): initialized [ 0.290270] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.292341] VFS: Disk quotas dquot_6.5.2 [ 0.292406] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.293126] fuse init (API version 7.16) [ 0.293222] msgmni has been set to 1952 [ 0.300408] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.300436] io scheduler noop registered [ 0.300439] io scheduler deadline registered [ 0.300487] io scheduler cfq registered (default) [ 0.310257] pcieport 0000:00:02.0: setting latency timer to 64 [ 0.310321] pcieport 0000:00:02.0: irq 64 for MSI/MSI-X [ 0.310462] pcieport 0000:00:03.0: setting latency timer to 64 [ 0.310507] pcieport 0000:00:03.0: irq 65 for MSI/MSI-X [ 0.310592] pcieport 0000:00:03.1: setting latency timer to 64 [ 0.310636] pcieport 0000:00:03.1: irq 66 for MSI/MSI-X [ 0.310728] pcieport 0000:00:03.2: setting latency timer to 64 [ 0.310772] pcieport 0000:00:03.2: irq 67 for MSI/MSI-X [ 0.310862] pcieport 0000:00:03.3: setting latency timer to 64 [ 0.310906] pcieport 0000:00:03.3: irq 68 for MSI/MSI-X [ 0.311007] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.311037] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.311195] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.311202] ACPI: Power Button [PWRB] [ 0.311258] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.311262] ACPI: Power Button [PWRF] [ 0.311311] ACPI: Fan [FAN] (on) [ 0.311515] ACPI: acpi_idle registered with cpuidle [ 0.313750] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.313752] ACPI: Thermal Zone [THRM] (47 C) [ 0.313796] ERST: Table is not found! [ 0.313888] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.334369] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.381653] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.400436] Linux agpgart interface v0.103 [ 0.401722] brd: module loaded [ 0.402304] loop: module loaded [ 0.402413] i2c-core: driver [adp5520] using legacy suspend method [ 0.402416] i2c-core: driver [adp5520] using legacy resume method [ 0.402783] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 [ 0.402801] pata_acpi 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 0.402853] pata_acpi 0000:00:0f.1: PCI INT A disabled [ 0.410501] Fixed MDIO Bus: probed [ 0.410539] PPP generic driver version 2.4.2 [ 0.410607] tun: Universal TUN/TAP device driver, 1.6 [ 0.410609] tun: (C) 1999-2004 Max Krasnyansky [ 0.410727] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.410953] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 [ 0.410971] ehci_hcd 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.410989] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 0.411036] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 0.411105] ehci_hcd 0000:00:10.4: irq 21, io mem 0xd3026000 [ 0.430161] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 [ 0.430354] hub 1-0:1.0: USB hub found [ 0.430360] hub 1-0:1.0: 8 ports detected [ 0.430488] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.430505] uhci_hcd: USB Universal Host Controller Interface driver [ 0.440146] uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.440160] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 0.440248] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 0.440276] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d000 [ 0.440442] hub 2-0:1.0: USB hub found [ 0.440447] hub 2-0:1.0: 2 ports detected [ 0.440588] uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.440594] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 0.440646] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 0.440667] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d400 [ 0.440801] hub 3-0:1.0: USB hub found [ 0.440805] hub 3-0:1.0: 2 ports detected [ 0.440907] uhci_hcd 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.440913] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 0.440952] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 0.440974] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d800 [ 0.441115] hub 4-0:1.0: USB hub found [ 0.441120] hub 4-0:1.0: 2 ports detected [ 0.441219] uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.441226] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 0.441269] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 [ 0.441291] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000dc00 [ 0.441424] hub 5-0:1.0: USB hub found [ 0.441429] hub 5-0:1.0: 2 ports detected [ 0.441557] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.441559] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.441740] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.441828] mousedev: PS/2 mouse device common for all mice [ 0.441946] rtc_cmos 00:04: RTC can wake from S4 [ 0.441998] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.442046] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.442185] device-mapper: uevent: version 1.0.3 [ 0.442269] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 0.446559] device-mapper: multipath: version 1.2.0 loaded [ 0.446564] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.447857] cpuidle: using governor ladder [ 0.447860] cpuidle: using governor menu [ 0.448150] TCP cubic registered [ 0.448294] NET: Registered protocol family 10 [ 0.448811] NET: Registered protocol family 17 [ 0.448833] Registering the dns_resolver key type [ 0.448857] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ (1 cpu cores) (version 2.20.00) [ 0.448918] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6 [ 0.448920] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 [ 0.449119] PM: Hibernation image not present or could not be loaded. [ 0.449132] registered taskstats version 1 [ 0.449461] Magic number: 15:276:565 [ 0.449564] rtc_cmos 00:04: setting system clock to 2011-06-11 04:34:41 UTC (1307766881) [ 0.449567] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.449569] EDD information not available. [ 0.470702] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.750295] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 0.787029] Freeing initrd memory: 19576k freed [ 0.799916] Freeing unused kernel memory: 956k freed [ 0.800485] Write protecting the kernel read-only data: 10240k [ 0.801384] Freeing unused kernel memory: 184k freed [ 0.807396] Freeing unused kernel memory: 1444k freed [ 0.836546] <30>udev[74]: starting version 167 [ 1.020040] usb 1-5: new high speed USB device using ehci_hcd and address 3 [ 1.057798] 3c59x 0000:00:0b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.057813] 3c59x: Donald Becker and others. [ 1.057820] 0000:00:0b.0: 3Com PCI 3c905C Tornado at ffffc9000019a000. [ 1.083352] pata_via 0000:00:0f.1: version 0.3.4 [ 1.083370] pata_via 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 1.085410] scsi0 : pata_via [ 1.086751] scsi1 : pata_via [ 1.088075] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xcc00 irq 14 [ 1.088079] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xcc08 irq 15 [ 1.090041] sata_via 0000:00:0f.0: version 2.6 [ 1.090058] sata_via 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 1.090093] sata_via 0000:00:0f.0: routed to hard irq line 11 [ 1.091929] scsi2 : sata_via [ 1.093213] scsi3 : sata_via [ 1.093272] ata3: SATA max UDMA/133 cmd 0xb400 ctl 0xb800 bmdma 0xc400 irq 20 [ 1.093275] ata4: SATA max UDMA/133 cmd 0xbc00 ctl 0xc000 bmdma 0xc408 irq 20 [ 1.148454] firewire_ohci 0000:00:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.157064] usbcore: registered new interface driver uas [ 1.157596] [drm] Initialized drm 1.1.0 20060810 [ 1.182491] Initializing USB Mass Storage driver... [ 1.182603] scsi4 : usb-storage 1-3:1.0 [ 1.182788] scsi5 : usb-storage 1-5:1.0 [ 1.183097] usbcore: registered new interface driver usb-storage [ 1.183100] USB Mass Storage support registered. [ 1.200076] firewire_ohci: Added fw-ohci device 0000:00:08.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [ 1.270013] Refined TSC clocksource calibration: 1980.039 MHz. [ 1.270018] Switching to clocksource tsc [ 1.290031] usb 1-6: new high speed USB device using ehci_hcd and address 4 [ 1.300009] ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 1.310675] ata1.00: ATA-7: ST3500630A, 3.AAF, max UDMA/100 [ 1.310678] ata1.00: 976773168 sectors, multi 16: LBA48 [ 1.310683] ata1.00: limited to UDMA/33 due to 40-wire cable [ 1.397224] ata1.00: configured for UDMA/33 [ 1.397332] scsi 0:0:0:0: Direct-Access ATA ST3500630A 3.AA PQ: 0 ANSI: 5 [ 1.397518] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.397872] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.397925] sd 0:0:0:0: [sda] Write Protect is off [ 1.397929] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.397952] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.441814] hub 1-6:1.0: USB hub found [ 1.443005] hub 1-6:1.0: 4 ports detected [ 1.443024] sda: sda1 sda2 < sda5 > [ 1.443373] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.560013] usb 1-8: new high speed USB device using ehci_hcd and address 5 [ 1.570329] ata2.00: ATAPI: DVDRW 16X16, PTS2, max UDMA/66 [ 1.570335] ata2.00: limited to UDMA/33 due to 40-wire cable [ 1.610204] ata2.00: configured for UDMA/33 [ 1.611510] scsi 1:0:0:0: CD-ROM DVDRW 16X16 PTS2 PQ: 0 ANSI: 5 [ 1.613763] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 1.613767] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.613889] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.613957] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.700100] firewire_core: created device fw0: GUID 0011d800001e6157, S400 [ 1.711785] hub 1-8:1.0: USB hub found [ 1.712055] hub 1-8:1.0: 4 ports detected [ 1.790315] usb 1-6.2: new low speed USB device using ehci_hcd and address 6 [ 1.820008] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 1.905884] [drm] radeon defaulting to kernel modesetting. [ 1.905888] [drm] radeon kernel modesetting enabled. [ 1.906038] radeon 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 [ 1.906045] radeon 0000:02:00.0: setting latency timer to 64 [ 1.909082] [drm] initializing kernel modesetting (RV380 0x1002:0x5B60). [ 1.909088] radeon 0000:02:00.0: PCI: Disallowing DAC for device [ 1.909090] radeon: No suitable DMA available. [ 1.909116] [drm] register mmio base: 0xD1000000 [ 1.909118] [drm] register mmio size: 65536 [ 1.909416] [drm] Generation 2 PCI interface, using max accessible memory [ 1.909422] radeon 0000:02:00.0: VRAM: 128M 0x00000000C8000000 - 0x00000000CFFFFFFF (128M used) [ 1.909425] radeon 0000:02:00.0: GTT: 512M 0x00000000A8000000 - 0x00000000C7FFFFFF [ 1.909433] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 1.909435] [drm] Driver supports precise vblank timestamp query. [ 1.909468] [drm] radeon: irq initialized. [ 1.909588] [drm] Detected VRAM RAM=128M, BAR=128M [ 1.909592] [drm] RAM width 64bits DDR [ 1.909661] [TTM] Zone kernel: Available graphics memory: 510844 kiB. [ 1.909664] [TTM] Initializing pool allocator. [ 1.909692] [drm] radeon: 128M of VRAM memory ready [ 1.909695] [drm] radeon: 512M of GTT memory ready. [ 1.909720] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 1.914223] [drm] radeon: 1 quad pipes, 1 Z pipes initialized. [ 1.915234] [drm] PCIE GART of 512M enabled (table at 0xC8040000). [ 1.915256] radeon 0000:02:00.0: WB enabled [ 1.915320] [drm] Loading R300 Microcode [ 1.917684] [drm] radeon: ring at 0x00000000A8001000 [ 1.917705] [drm] ring test succeeded in 1 usecs [ 1.917827] [drm] radeon: ib pool ready. [ 1.918018] [drm] ib test succeeded in 0 usecs [ 1.918253] [drm] Radeon Display Connectors [ 1.918255] [drm] Connector 0: [ 1.918256] [drm] VGA [ 1.918259] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 1.918261] [drm] Encoders: [ 1.918262] [drm] CRT1: INTERNAL_DAC1 [ 1.918264] [drm] Connector 1: [ 1.918266] [drm] DVI-I [ 1.918267] [drm] HPD1 [ 1.918269] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 1.918271] [drm] Encoders: [ 1.918273] [drm] CRT2: INTERNAL_DAC2 [ 1.918274] [drm] DFP1: INTERNAL_TMDS1 [ 1.918276] [drm] Connector 2: [ 1.918277] [drm] S-video [ 1.918279] [drm] Encoders: [ 1.918280] [drm] TV1: INTERNAL_DAC2 [ 1.973830] usbcore: registered new interface driver usbhid [ 1.973833] usbhid: USB HID core driver [ 1.981337] input: GreenAsia Inc. USB Joystick as /devices/pci0000:00/0000:00:10.4/usb1/1-6/1-6.2/1-6.2:1.0/input/input3 [ 1.981534] pantherlord 0003:0E8F:0003.0001: input,hidraw0: USB HID v1.10 Joystick [GreenAsia Inc. USB Joystick ] on usb-0000:00:10.4-6.2/input0 [ 1.981550] pantherlord 0003:0E8F:0003.0001: Force feedback for PantherLord/GreenAsia devices by Anssi Hannula [ 1.990370] usb 1-6.3: new low speed USB device using ehci_hcd and address 7 [ 2.110121] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:10.4/usb1/1-6/1-6.3/1-6.3:1.0/input/input4 [ 2.110246] generic-usb 0003:046D:C051.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.4-6.3/input0 [ 2.182887] scsi 4:0:0:0: Direct-Access WD Ext HDD 1021 2002 PQ: 0 ANSI: 4 [ 2.183264] scsi 5:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 2.183772] scsi 5:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 2.184253] scsi 5:0:0:2: Direct-Access Generic USB xD/SM Reader 1.02 PQ: 0 ANSI: 0 [ 2.184742] scsi 5:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 2.187252] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 2.187444] sd 5:0:0:1: Attached scsi generic sg3 type 0 [ 2.187946] sd 5:0:0:2: Attached scsi generic sg4 type 0 [ 2.188425] sd 5:0:0:3: Attached scsi generic sg5 type 0 [ 2.188810] sd 4:0:0:0: Attached scsi generic sg6 type 0 [ 2.190365] usb 1-8.1: new high speed USB device using ehci_hcd and address 8 [ 2.191639] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 2.192257] sd 4:0:0:0: [sdf] 3907024896 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 2.193136] sd 4:0:0:0: [sdf] Test WP failed, assume Write Enabled [ 2.193503] sd 5:0:0:1: [sdc] Attached SCSI removable disk [ 2.194133] sd 4:0:0:0: [sdf] Asking for cache data failed [ 2.194136] sd 4:0:0:0: [sdf] Assuming drive cache: write through [ 2.194907] sd 5:0:0:2: [sdd] Attached SCSI removable disk [ 2.195507] sd 5:0:0:3: [sde] Attached SCSI removable disk [ 2.195752] sd 4:0:0:0: [sdf] Test WP failed, assume Write Enabled [ 2.196625] sd 4:0:0:0: [sdf] Asking for cache data failed [ 2.196628] sd 4:0:0:0: [sdf] Assuming drive cache: write through [ 2.198010] sdf: unknown partition table [ 2.199502] sd 4:0:0:0: [sdf] Test WP failed, assume Write Enabled [ 2.200527] sd 4:0:0:0: [sdf] Asking for cache data failed [ 2.200531] sd 4:0:0:0: [sdf] Assuming drive cache: write through [ 2.200535] sd 4:0:0:0: [sdf] Attached SCSI disk [ 2.301667] hub 1-8.1:1.0: USB hub found [ 2.302029] hub 1-8.1:1.0: 4 ports detected [ 2.387304] [drm] fb mappable at 0xC80C0000 [ 2.387307] [drm] vram apper at 0xC8000000 [ 2.387309] [drm] size 8294400 [ 2.387311] [drm] fb depth is 24 [ 2.387313] [drm] pitch is 7680 [ 2.388453] Console: switching to colour frame buffer device 210x65 [ 2.388505] fb0: radeondrmfb frame buffer device [ 2.388507] drm: registered panic notifier [ 2.388517] [drm] Initialized radeon 2.8.0 20080528 for 0000:02:00.0 on minor 0 [ 22.404656] Intel AES-NI instructions are not detected. [ 23.377405] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 34.596307] Adding 1044476k swap on /dev/mapper/akira-swap_1. Priority:-1 extents:1 across:1044476k [ 34.597216] <30>udev[496]: starting version 167 [ 34.642314] lp: driver loaded but no devices found [ 34.716259] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 35.211997] type=1400 audit(1307766916.253:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=722 comm="apparmor_parser" [ 35.220899] type=1400 audit(1307766916.263:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=722 comm="apparmor_parser" [ 35.221171] type=1400 audit(1307766916.263:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=722 comm="apparmor_parser" [ 35.292690] RPC: Registered udp transport module. [ 35.292695] RPC: Registered tcp transport module. [ 35.292697] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 35.427220] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 35.432870] FS-Cache: Loaded [ 35.490364] parport_pc 00:08: reported by Plug and Play ACPI [ 35.490411] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 35.673423] FS-Cache: Netfs 'nfs' registered for caching [ 35.721025] eth0: setting full-duplex. [ 35.896250] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 35.901546] lp0: using parport0 (interrupt-driven). [ 35.923778] gameport gameport0: NS558 PnP Gameport is pnp00:0a/gameport0, io 0x201, speed 891kHz [ 35.944598] ACPI: resource vt596_smbus [io 0x5000-0x5007] conflicts with ACPI region SM06 [io 0x5006-0x5006] [ 35.944602] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 36.228709] MCE: In-kernel MCE decoding enabled. [ 37.063808] type=1400 audit(1307766918.103:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1078 comm="apparmor_parser" [ 37.132007] type=1400 audit(1307766918.173:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1078 comm="apparmor_parser" [ 37.132281] type=1400 audit(1307766918.173:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1078 comm="apparmor_parser" [ 37.175023] type=1400 audit(1307766918.213:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1079 comm="apparmor_parser" [ 37.197456] type=1400 audit(1307766918.233:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1079 comm="apparmor_parser" [ 37.198605] EDAC MC: Ver: 2.1.0 Apr 11 2011 [ 37.207786] type=1400 audit(1307766918.243:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1079 comm="apparmor_parser" [ 37.251736] type=1400 audit(1307766918.293:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1093 comm="apparmor_parser" [ 38.076019] EDAC amd64_edac: v3.3.0 [ 38.084859] EDAC amd64: DRAM ECC disabled. [ 38.084866] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 38.084868] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 38.084870] (Note that use of the override may cause unknown side effects.) [ 38.171521] ppdev: user-space parallel port driver [ 38.337871] VIA 82xx Modem 0000:00:11.6: enabling device (0000 -> 0001) [ 38.337995] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [ 38.338010] VIA 82xx Modem 0000:00:11.6: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22 [ 38.885987] svc: failed to register lockdv1 RPC service (errno 97). [ 38.889022] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 38.912935] NFSD: starting 90-second grace period [ 39.080063] VIA 82xx Modem 0000:00:11.6: setting latency timer to 64 [ 39.590233] VIA 82xx Modem 0000:00:11.6: PCI INT C disabled [ 39.590283] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13 [ 39.592211] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22 [ 39.592370] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 41.788576] audit_printk_skb: 6 callbacks suppressed [ 41.788580] type=1400 audit(1307766922.823:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1744 comm="apparmor_parser" [ 41.789116] type=1400 audit(1307766922.823:15): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1744 comm="apparmor_parser" [ 46.460007] eth0: no IPv6 routers present [ 48.923664] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,commit=0 [ 49.415374] ip_tables: (C) 2000-2006 Netfilter Core Team [ 94.177766] EXT3-fs: barriers not enabled [ 94.211698] kjournald starting. Commit interval 5 seconds [ 94.213419] EXT3-fs (dm-4): using internal journal [ 94.213422] EXT3-fs (dm-4): recovery complete [ 94.214031] EXT3-fs (dm-4): mounted filesystem with ordered data mode [ 96.319385] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 109.700144] Marking TSC unstable due to cpufreq changes [ 109.706934] Switching to clocksource acpi_pm