[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-8-generic (buildd@vernadsky) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel! [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: /M59SLI-S5, BIOS F9c 06/18/2008 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00f4d00] f4d00 [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000 [ 0.000000] RAMDISK: 3677e000 - 373b7000 [ 0.000000] ACPI: RSDP 000f66f0 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 7fff3000 00038 (v01 GBT NVDAACPI 42302E31 NVDA 01010101) [ 0.000000] ACPI: FACP 7fff3040 00074 (v01 GBT NVDAACPI 42302E31 NVDA 01010101) [ 0.000000] ACPI: DSDT 7fff30c0 051E1 (v01 GBT NVDAACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 7fff0000 00040 [ 0.000000] ACPI: SSDT 7fff8340 0028A (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 7fff8600 00038 (v01 GBT NVDAACPI 42302E31 NVDA 00000098) [ 0.000000] ACPI: MCFG 7fff8640 0003C (v01 GBT NVDAACPI 42302E31 NVDA 01010101) [ 0.000000] ACPI: APIC 7fff82c0 00072 (v01 GBT NVDAACPI 42302E31 NVDA 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1159MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0007fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007fff0 [ 0.000000] On node 0 totalpages: 524159 [ 0.000000] free_area_init_node: node 0, pgdat c1784100, node_mem_map f577e200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2320 pages used for memmap [ 0.000000] HighMem zone: 294626 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfefffc00 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:70000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f5000000 s28800 r0 d24448 u2097152 [ 0.000000] pcpu-alloc: s28800 r0 d24448 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520063 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=80dec9f0-ab97-403a-8cca-237f5b2e75a4 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 10485120 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0007fff0) [ 0.000000] Memory: 2047180k/2097088k available (5188k kernel code, 49456k reserved, 2540k data, 700k init, 1187784k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc178d000 - 0xc183c000 ( 700 kB) [ 0.000000] .data : 0xc15112a1 - 0xc178c480 (2540 kB) [ 0.000000] .text : 0xc1000000 - 0xc15112a1 (5188 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=f4008000 soft=f400a000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2611.545 MHz processor. [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5223.09 BogoMIPS (lpj=10446180) [ 0.004010] pid_max: default: 32768 minimum: 301 [ 0.004036] Security Framework initialized [ 0.004054] AppArmor: AppArmor initialized [ 0.004056] Yama: becoming mindful. [ 0.004117] Mount-cache hash table entries: 512 [ 0.004247] Initializing cgroup subsys ns [ 0.004251] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.004254] Initializing cgroup subsys cpuacct [ 0.004260] Initializing cgroup subsys memory [ 0.004268] Initializing cgroup subsys devices [ 0.004271] Initializing cgroup subsys freezer [ 0.004273] Initializing cgroup subsys net_cls [ 0.004276] Initializing cgroup subsys blkio [ 0.004307] CPU: Physical Processor ID: 0 [ 0.004309] CPU: Processor Core ID: 0 [ 0.004312] mce: CPU supports 5 MCE banks [ 0.004322] using C1E aware idle routine [ 0.009960] ACPI: Core revision 20110112 [ 0.015886] ftrace: allocating 23640 entries in 47 pages [ 0.020072] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.020471] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.028001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.028001] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.028001] ..... (found apic 0 pin 0) ... [ 0.069623] ....... works. [ 0.069624] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02 [ 0.072003] Performance Events: AMD PMU driver. [ 0.072003] ... version: 0 [ 0.072003] ... bit width: 48 [ 0.072003] ... generic registers: 4 [ 0.072003] ... value mask: 0000ffffffffffff [ 0.072003] ... max period: 00007fffffffffff [ 0.072003] ... fixed-purpose events: 0 [ 0.072003] ... event mask: 000000000000000f [ 0.072003] CPU 1 irqstacks, hard=f40ca000 soft=f40cc000 [ 0.072003] Booting Node 0, Processors #1 Ok. [ 0.008000] Initializing CPU#1 [ 0.156042] Brought up 2 CPUs [ 0.156044] Total of 2 processors activated (10447.50 BogoMIPS). [ 0.156276] devtmpfs: initialized [ 0.157063] print_constraints: dummy: [ 0.157092] Time: 13:17:18 Date: 05/24/11 [ 0.157131] NET: Registered protocol family 16 [ 0.157161] Trying to unpack rootfs image as initramfs... [ 0.157251] EISA bus registered [ 0.157256] node 0 link 0: io port [1000, fffff] [ 0.157259] TOM: 0000000080000000 aka 2048M [ 0.157261] node 0 link 0: mmio [f0000000, f7ffffff] [ 0.157265] node 0 link 0: mmio [a0000, bffff] [ 0.157267] node 0 link 0: mmio [80000000, ffb7ffff] [ 0.157270] bus: [00, ff] on node 0 link 0 [ 0.157273] bus: 00 index 0 [io 0x0000-0xffff] [ 0.157275] bus: 00 index 1 [mem 0x80000000-0xffffffff] [ 0.157277] bus: 00 index 2 [mem 0x000a0000-0x000bffff] [ 0.157283] ACPI: bus type pci registered [ 0.157346] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.157349] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 0.157351] PCI: Using MMCONFIG for extended config space [ 0.157352] PCI: Using configuration type 1 for base access [ 0.158291] bio: create slab at 0 [ 0.160099] ACPI: EC: Look up EC in DSDT [ 0.164317] ACPI: Interpreter enabled [ 0.164322] ACPI: (supports S0 S3 S4 S5) [ 0.164338] ACPI: Using IOAPIC for interrupt routing [ 0.169111] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.169117] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND (20110112/psparse-536) [ 0.169142] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.169147] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND (20110112/psparse-536) [ 0.170177] ACPI: No dock devices found. [ 0.170179] HEST: Table not found. [ 0.170181] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.170225] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.170315] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.170317] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.170320] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.170322] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.170324] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] [ 0.170327] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] [ 0.170339] pci 0000:00:00.0: [10de:02f4] type 0 class 0x000500 [ 0.170374] pci 0000:00:00.1: [10de:02fa] type 0 class 0x000500 [ 0.170397] pci 0000:00:00.2: [10de:02fe] type 0 class 0x000500 [ 0.170429] pci 0000:00:00.3: [10de:02f8] type 0 class 0x000500 [ 0.170460] pci 0000:00:00.4: [10de:02f9] type 0 class 0x000500 [ 0.170492] pci 0000:00:00.5: [10de:02ff] type 0 class 0x000500 [ 0.170519] pci 0000:00:00.6: [10de:027f] type 0 class 0x000500 [ 0.170542] pci 0000:00:00.7: [10de:027e] type 0 class 0x000500 [ 0.170578] pci 0000:00:04.0: [10de:02fb] type 1 class 0x000604 [ 0.170598] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.170601] pci 0000:00:04.0: PME# disabled [ 0.170628] pci 0000:00:08.0: [10de:0369] type 0 class 0x000500 [ 0.170784] pci 0000:00:09.0: [10de:0360] type 0 class 0x000601 [ 0.170812] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.170825] pci 0000:00:09.1: [10de:0368] type 0 class 0x000c05 [ 0.170854] pci 0000:00:09.1: reg 20: [io 0x1c00-0x1c3f] [ 0.170860] pci 0000:00:09.1: reg 24: [io 0x1c80-0x1cbf] [ 0.170882] pci 0000:00:09.1: PME# supported from D3hot D3cold [ 0.170887] pci 0000:00:09.1: PME# disabled [ 0.170907] pci 0000:00:0a.0: [10de:036c] type 0 class 0x000c03 [ 0.170916] pci 0000:00:0a.0: reg 10: [mem 0xfd106000-0xfd106fff] [ 0.170946] pci 0000:00:0a.0: supports D1 D2 [ 0.170948] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.170951] pci 0000:00:0a.0: PME# disabled [ 0.170963] pci 0000:00:0a.1: [10de:036d] type 0 class 0x000c03 [ 0.170972] pci 0000:00:0a.1: reg 10: [mem 0xfd107000-0xfd1070ff] [ 0.171002] pci 0000:00:0a.1: supports D1 D2 [ 0.171004] pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.171007] pci 0000:00:0a.1: PME# disabled [ 0.171024] pci 0000:00:0c.0: [10de:036e] type 0 class 0x000101 [ 0.171043] pci 0000:00:0c.0: reg 20: [io 0xf000-0xf00f] [ 0.171067] pci 0000:00:0d.0: [10de:037f] type 0 class 0x000101 [ 0.171077] pci 0000:00:0d.0: reg 10: [io 0xa000-0xa007] [ 0.171082] pci 0000:00:0d.0: reg 14: [io 0xa400-0xa403] [ 0.171087] pci 0000:00:0d.0: reg 18: [io 0xa800-0xa807] [ 0.171092] pci 0000:00:0d.0: reg 1c: [io 0xac00-0xac03] [ 0.171097] pci 0000:00:0d.0: reg 20: [io 0xb000-0xb00f] [ 0.171102] pci 0000:00:0d.0: reg 24: [mem 0xfd10e000-0xfd10efff] [ 0.171129] pci 0000:00:0d.1: [10de:037f] type 0 class 0x000101 [ 0.171139] pci 0000:00:0d.1: reg 10: [io 0xb400-0xb407] [ 0.171144] pci 0000:00:0d.1: reg 14: [io 0xb800-0xb803] [ 0.171149] pci 0000:00:0d.1: reg 18: [io 0xbc00-0xbc07] [ 0.171154] pci 0000:00:0d.1: reg 1c: [io 0xc000-0xc003] [ 0.171159] pci 0000:00:0d.1: reg 20: [io 0xc400-0xc40f] [ 0.171164] pci 0000:00:0d.1: reg 24: [mem 0xfd104000-0xfd104fff] [ 0.171191] pci 0000:00:0d.2: [10de:037f] type 0 class 0x000101 [ 0.171200] pci 0000:00:0d.2: reg 10: [io 0xc800-0xc807] [ 0.171205] pci 0000:00:0d.2: reg 14: [io 0xcc00-0xcc03] [ 0.171210] pci 0000:00:0d.2: reg 18: [io 0xd000-0xd007] [ 0.171215] pci 0000:00:0d.2: reg 1c: [io 0xd400-0xd403] [ 0.171220] pci 0000:00:0d.2: reg 20: [io 0xd800-0xd80f] [ 0.171225] pci 0000:00:0d.2: reg 24: [mem 0xfd105000-0xfd105fff] [ 0.171255] pci 0000:00:0e.0: [10de:0370] type 1 class 0x000604 [ 0.171287] pci 0000:00:0e.1: [10de:0371] type 0 class 0x000403 [ 0.171298] pci 0000:00:0e.1: reg 10: [mem 0xfd100000-0xfd103fff] [ 0.171332] pci 0000:00:0e.1: PME# supported from D3hot D3cold [ 0.171335] pci 0000:00:0e.1: PME# disabled [ 0.171357] pci 0000:00:10.0: [10de:0373] type 0 class 0x000680 [ 0.171371] pci 0000:00:10.0: reg 10: [mem 0xfd108000-0xfd108fff] [ 0.171377] pci 0000:00:10.0: reg 14: [io 0xe000-0xe007] [ 0.171382] pci 0000:00:10.0: reg 18: [mem 0xfd109000-0xfd1090ff] [ 0.171387] pci 0000:00:10.0: reg 1c: [mem 0xfd10a000-0xfd10a00f] [ 0.171413] pci 0000:00:10.0: supports D1 D2 [ 0.171415] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.171419] pci 0000:00:10.0: PME# disabled [ 0.171437] pci 0000:00:11.0: [10de:0373] type 0 class 0x000680 [ 0.171451] pci 0000:00:11.0: reg 10: [mem 0xfd10b000-0xfd10bfff] [ 0.171456] pci 0000:00:11.0: reg 14: [io 0xe400-0xe407] [ 0.171461] pci 0000:00:11.0: reg 18: [mem 0xfd10c000-0xfd10c0ff] [ 0.171466] pci 0000:00:11.0: reg 1c: [mem 0xfd10d000-0xfd10d00f] [ 0.171493] pci 0000:00:11.0: supports D1 D2 [ 0.171495] pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.171499] pci 0000:00:11.0: PME# disabled [ 0.171517] pci 0000:00:15.0: [10de:0378] type 1 class 0x000604 [ 0.171542] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.171545] pci 0000:00:15.0: PME# disabled [ 0.171557] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 [ 0.171573] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 [ 0.171587] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 [ 0.171600] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 [ 0.171643] pci 0000:01:00.0: [10de:0393] type 0 class 0x000300 [ 0.171650] pci 0000:01:00.0: reg 10: [mem 0xf8000000-0xf8ffffff] [ 0.171658] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.171666] pci 0000:01:00.0: reg 1c: [mem 0xf9000000-0xf9ffffff 64bit] [ 0.171672] pci 0000:01:00.0: reg 24: [io 0x6000-0x607f] [ 0.171677] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.171696] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.171703] pci 0000:00:04.0: PCI bridge to [bus 01-01] [ 0.171706] pci 0000:00:04.0: bridge window [io 0x6000-0x6fff] [ 0.171709] pci 0000:00:04.0: bridge window [mem 0xf8000000-0xfaffffff] [ 0.171712] pci 0000:00:04.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.171741] pci 0000:02:07.0: [9004:8178] type 0 class 0x000100 [ 0.171753] pci 0000:02:07.0: reg 10: [io 0x7000-0x70ff] [ 0.171760] pci 0000:02:07.0: reg 14: [mem 0xfc005000-0xfc005fff] [ 0.171786] pci 0000:02:07.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.171815] pci 0000:02:0e.0: [104c:8024] type 0 class 0x000c00 [ 0.171827] pci 0000:02:0e.0: reg 10: [mem 0xfc004000-0xfc0047ff] [ 0.171835] pci 0000:02:0e.0: reg 14: [mem 0xfc000000-0xfc003fff] [ 0.171874] pci 0000:02:0e.0: supports D1 D2 [ 0.171876] pci 0000:02:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.171879] pci 0000:02:0e.0: PME# disabled [ 0.171898] pci 0000:00:0e.0: PCI bridge to [bus 02-02] (subtractive decode) [ 0.171901] pci 0000:00:0e.0: bridge window [io 0x7000-0x7fff] [ 0.171904] pci 0000:00:0e.0: bridge window [mem 0xfb000000-0xfcffffff] [ 0.171907] pci 0000:00:0e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.171910] pci 0000:00:0e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.171912] pci 0000:00:0e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.171914] pci 0000:00:0e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.171917] pci 0000:00:0e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.171920] pci 0000:00:0e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode) [ 0.171922] pci 0000:00:0e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode) [ 0.171959] pci 0000:03:00.0: [197b:2363] type 0 class 0x000106 [ 0.172026] pci 0000:03:00.0: reg 24: [mem 0xfd000000-0xfd001fff] [ 0.172058] pci 0000:03:00.0: PME# supported from D3hot [ 0.172062] pci 0000:03:00.0: PME# disabled [ 0.172085] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101 [ 0.172103] pci 0000:03:00.1: reg 10: [io 0x8000-0x8007] [ 0.172113] pci 0000:03:00.1: reg 14: [io 0x8400-0x8403] [ 0.172124] pci 0000:03:00.1: reg 18: [io 0x8800-0x8807] [ 0.172134] pci 0000:03:00.1: reg 1c: [io 0x8c00-0x8c03] [ 0.172144] pci 0000:03:00.1: reg 20: [io 0x9000-0x900f] [ 0.172195] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.172205] pci 0000:00:15.0: PCI bridge to [bus 03-03] [ 0.172209] pci 0000:00:15.0: bridge window [io 0x8000-0x9fff] [ 0.172212] pci 0000:00:15.0: bridge window [mem 0xfd000000-0xfd0fffff] [ 0.172216] pci 0000:00:15.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.172223] pci_bus 0000:00: on NUMA node 0 [ 0.172226] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.172409] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.172535] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.173563] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.173568] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND (20110112/psparse-536) [ 0.174967] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.174972] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND (20110112/psparse-536) [ 0.176369] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.176374] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND (20110112/psparse-536) [ 0.177768] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.177773] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND (20110112/psparse-536) [ 0.179174] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.179178] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND (20110112/psparse-536) [ 0.180580] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.180584] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND (20110112/psparse-536) [ 0.181982] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.181986] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND (20110112/psparse-536) [ 0.183381] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.183385] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND (20110112/psparse-536) [ 0.184790] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.184795] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND (20110112/psparse-536) [ 0.186190] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.186195] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND (20110112/psparse-536) [ 0.187588] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.187592] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND (20110112/psparse-536) [ 0.188986] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.188990] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND (20110112/psparse-536) [ 0.190377] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.190381] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND (20110112/psparse-536) [ 0.191770] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.191774] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND (20110112/psparse-536) [ 0.193164] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.193168] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND (20110112/psparse-536) [ 0.194556] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.194561] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND (20110112/psparse-536) [ 0.195946] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.195951] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND (20110112/psparse-536) [ 0.197343] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.197348] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND (20110112/psparse-536) [ 0.198733] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.198738] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND (20110112/psparse-536) [ 0.200133] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.200137] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND (20110112/psparse-536) [ 0.201527] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.201532] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND (20110112/psparse-536) [ 0.202918] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.202922] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND (20110112/psparse-536) [ 0.204319] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.204323] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND (20110112/psparse-536) [ 0.205715] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.205719] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND (20110112/psparse-536) [ 0.207107] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.207111] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND (20110112/psparse-536) [ 0.208498] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.208503] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND (20110112/psparse-536) [ 0.209886] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.209891] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND (20110112/psparse-536) [ 0.210489] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 *15) [ 0.210528] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.210569] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 *11 14 15) [ 0.210607] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.210648] ACPI: PCI Interrupt Link [LNK5] (IRQs *5 7 9 10 11 14 15) [ 0.210686] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.210725] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.210766] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 *15) [ 0.210804] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.210844] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15) [ 0.210884] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) [ 0.210924] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 10 *11 14 15) [ 0.210966] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 *15) [ 0.211005] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.211045] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 *15) [ 0.211085] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15) [ 0.211124] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.211165] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15) [ 0.211205] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15) [ 0.211245] ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15) [ 0.211313] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 [ 0.211378] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.211443] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 0.211508] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.211573] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0 [ 0.211637] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 0.211702] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 0.211767] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0 [ 0.211832] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 0.211901] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.211967] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0 [ 0.212036] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 0.212103] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.212169] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.212235] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 0.212302] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.212368] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.212435] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.212501] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.212568] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0 [ 0.212668] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.212673] vgaarb: loaded [ 0.212865] SCSI subsystem initialized [ 0.212916] libata version 3.00 loaded. [ 0.212959] usbcore: registered new interface driver usbfs [ 0.212969] usbcore: registered new interface driver hub [ 0.212992] usbcore: registered new device driver usb [ 0.213099] wmi: Mapper loaded [ 0.213100] PCI: Using ACPI for IRQ routing [ 0.213103] PCI: pci_cache_line_size set to 64 bytes [ 0.213180] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.213183] reserve RAM buffer: 000000007fff0000 - 000000007fffffff [ 0.213272] NetLabel: Initializing [ 0.213273] NetLabel: domain hash size = 128 [ 0.213275] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.213285] NetLabel: unlabeled traffic allowed by default [ 0.220052] AppArmor: AppArmor Filesystem Enabled [ 0.220079] pnp: PnP ACPI init [ 0.220096] ACPI: bus type pnp registered [ 0.220186] pnp 00:00: [bus 00-ff] [ 0.220189] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.220191] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.220193] pnp 00:00: [io 0x0d00-0xffff window] [ 0.220196] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.220198] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.220200] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 0.220202] pnp 00:00: [mem 0x80000000-0xfebfffff window] [ 0.220272] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.220293] pnp 00:01: [io 0x1000-0x107f] [ 0.220295] pnp 00:01: [io 0x1080-0x10ff] [ 0.220297] pnp 00:01: [io 0x1400-0x147f] [ 0.220299] pnp 00:01: [io 0x1480-0x14ff] [ 0.220300] pnp 00:01: [io 0x1800-0x187f] [ 0.220302] pnp 00:01: [io 0x1880-0x18ff] [ 0.220365] system 00:01: [io 0x1000-0x107f] has been reserved [ 0.220368] system 00:01: [io 0x1080-0x10ff] has been reserved [ 0.220370] system 00:01: [io 0x1400-0x147f] has been reserved [ 0.220373] system 00:01: [io 0x1480-0x14ff] has been reserved [ 0.220375] system 00:01: [io 0x1800-0x187f] has been reserved [ 0.220378] system 00:01: [io 0x1880-0x18ff] has been reserved [ 0.220381] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.220934] pnp 00:02: [io 0x0010-0x001f] [ 0.220936] pnp 00:02: [io 0x0022-0x003f] [ 0.220938] pnp 00:02: [io 0x0044-0x004d] [ 0.220940] pnp 00:02: [io 0x0050-0x005f] [ 0.220942] pnp 00:02: [io 0x0062-0x0063] [ 0.220943] pnp 00:02: [io 0x0065-0x006f] [ 0.220945] pnp 00:02: [io 0x0074-0x007f] [ 0.220947] pnp 00:02: [io 0x0091-0x0093] [ 0.220949] pnp 00:02: [io 0x00a2-0x00bf] [ 0.220951] pnp 00:02: [io 0x00e0-0x00ef] [ 0.220953] pnp 00:02: [io 0x04d0-0x04d1] [ 0.220955] pnp 00:02: [io 0x0800-0x087f] [ 0.220956] pnp 00:02: [io 0x0295-0x0314] [ 0.220958] pnp 00:02: [io 0x0290-0x0294] [ 0.221042] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.221044] system 00:02: [io 0x0800-0x087f] has been reserved [ 0.221047] system 00:02: [io 0x0295-0x0314] has been reserved [ 0.221049] system 00:02: [io 0x0290-0x0294] has been reserved [ 0.221052] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.221062] pnp 00:03: [dma 4] [ 0.221064] pnp 00:03: [io 0x0000-0x000f] [ 0.221066] pnp 00:03: [io 0x0080-0x0090] [ 0.221068] pnp 00:03: [io 0x0094-0x009f] [ 0.221070] pnp 00:03: [io 0x00c0-0x00df] [ 0.221109] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.221124] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.221130] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND (20110112/psparse-536) [ 0.221149] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.221153] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._CRS] (Node f402ae70), AE_NOT_FOUND (20110112/psparse-536) [ 0.221201] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.221216] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.221220] ACPI Error: Method parse/execution failed [\_SB_.PCI0.RTC_._CRS] (Node f402aee8), AE_NOT_FOUND (20110112/psparse-536) [ 0.221266] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.221273] pnp 00:06: [io 0x0061] [ 0.221313] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.221321] pnp 00:07: [io 0x00f0-0x00ff] [ 0.221331] pnp 00:07: [irq 13] [ 0.221375] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.221597] pnp 00:08: [io 0x03f8-0x03ff] [ 0.221602] pnp 00:08: [irq 4] [ 0.221669] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.221834] pnp 00:09: [io 0x0378-0x037f] [ 0.221839] pnp 00:09: [irq 7] [ 0.221896] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.221995] pnp 00:0a: [mem 0xf0000000-0xf7ffffff] [ 0.222058] system 00:0a: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.222062] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.222151] pnp 00:0b: [mem 0x000d7c00-0x000d7fff] [ 0.222154] pnp 00:0b: [mem 0x000f0000-0x000f7fff] [ 0.222156] pnp 00:0b: [mem 0x000f8000-0x000fbfff] [ 0.222158] pnp 00:0b: [mem 0x000fc000-0x000fffff] [ 0.222160] pnp 00:0b: [mem 0x7fff0000-0x7fffffff] [ 0.222162] pnp 00:0b: [mem 0xffff0000-0xffffffff] [ 0.222164] pnp 00:0b: [mem 0x00000000-0x0009ffff] [ 0.222166] pnp 00:0b: [mem 0x00100000-0x7ffeffff] [ 0.222168] pnp 00:0b: [mem 0xfec00000-0xfec00fff] [ 0.222170] pnp 00:0b: [mem 0xfee00000-0xfee00fff] [ 0.222242] system 00:0b: [mem 0x000d7c00-0x000d7fff] has been reserved [ 0.222245] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.222247] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.222250] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.222253] system 00:0b: [mem 0x7fff0000-0x7fffffff] could not be reserved [ 0.222255] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved [ 0.222258] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.222261] system 00:0b: [mem 0x00100000-0x7ffeffff] could not be reserved [ 0.222263] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.222266] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.222269] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.222285] pnp: PnP ACPI: found 12 devices [ 0.222286] ACPI: ACPI bus type pnp unregistered [ 0.222289] PnPBIOS: Disabled by ACPI PNP [ 0.258374] Switching to clocksource acpi_pm [ 0.258617] pci 0000:00:0e.0: BAR 15: assigned [mem 0x80000000-0x800fffff pref] [ 0.258621] pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa01ffff pref] [ 0.258624] pci 0000:00:04.0: PCI bridge to [bus 01-01] [ 0.258627] pci 0000:00:04.0: bridge window [io 0x6000-0x6fff] [ 0.258630] pci 0000:00:04.0: bridge window [mem 0xf8000000-0xfaffffff] [ 0.258633] pci 0000:00:04.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.258638] pci 0000:02:07.0: BAR 6: assigned [mem 0x80000000-0x8000ffff pref] [ 0.258640] pci 0000:00:0e.0: PCI bridge to [bus 02-02] [ 0.258642] pci 0000:00:0e.0: bridge window [io 0x7000-0x7fff] [ 0.258646] pci 0000:00:0e.0: bridge window [mem 0xfb000000-0xfcffffff] [ 0.258649] pci 0000:00:0e.0: bridge window [mem 0x80000000-0x800fffff pref] [ 0.258653] pci 0000:00:15.0: PCI bridge to [bus 03-03] [ 0.258655] pci 0000:00:15.0: bridge window [io 0x8000-0x9fff] [ 0.258658] pci 0000:00:15.0: bridge window [mem 0xfd000000-0xfd0fffff] [ 0.258661] pci 0000:00:15.0: bridge window [mem pref disabled] [ 0.258669] pci 0000:00:04.0: setting latency timer to 64 [ 0.258673] pci 0000:00:0e.0: setting latency timer to 64 [ 0.258677] pci 0000:00:15.0: setting latency timer to 64 [ 0.258680] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.258683] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.258685] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.258687] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.258690] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.258692] pci_bus 0000:00: resource 9 [mem 0x80000000-0xfebfffff] [ 0.258694] pci_bus 0000:01: resource 0 [io 0x6000-0x6fff] [ 0.258697] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfaffffff] [ 0.258699] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.258702] pci_bus 0000:02: resource 0 [io 0x7000-0x7fff] [ 0.258704] pci_bus 0000:02: resource 1 [mem 0xfb000000-0xfcffffff] [ 0.258706] pci_bus 0000:02: resource 2 [mem 0x80000000-0x800fffff pref] [ 0.258709] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] [ 0.258711] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] [ 0.258713] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] [ 0.258715] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff] [ 0.258718] pci_bus 0000:02: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.258720] pci_bus 0000:02: resource 9 [mem 0x80000000-0xfebfffff] [ 0.258723] pci_bus 0000:03: resource 0 [io 0x8000-0x9fff] [ 0.258725] pci_bus 0000:03: resource 1 [mem 0xfd000000-0xfd0fffff] [ 0.258757] NET: Registered protocol family 2 [ 0.258814] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.259043] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.259533] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.259768] TCP: Hash tables configured (established 131072 bind 65536) [ 0.259770] TCP reno registered [ 0.259773] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.259782] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.259860] NET: Registered protocol family 1 [ 0.259886] pci 0000:00:00.0: Found disabled HT MSI Mapping [ 0.259890] pci 0000:00:00.0: Enabling HT MSI Mapping [ 0.259923] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.282245] Switched to NOHz mode on CPU #1 [ 0.282248] Switched to NOHz mode on CPU #0 [ 0.282358] pci 0000:00:0d.0: Enabling HT MSI Mapping [ 0.282402] pci 0000:00:0d.1: Enabling HT MSI Mapping [ 0.282447] pci 0000:00:0d.2: Enabling HT MSI Mapping [ 0.282491] pci 0000:00:0e.0: Enabling HT MSI Mapping [ 0.282540] pci 0000:00:0e.1: Enabling HT MSI Mapping [ 0.282598] pci 0000:00:10.0: Enabling HT MSI Mapping [ 0.282661] pci 0000:00:11.0: Enabling HT MSI Mapping [ 0.282727] pci 0000:00:15.0: Enabling HT MSI Mapping [ 0.282742] pci 0000:01:00.0: Boot video device [ 0.282752] PCI: CLS 32 bytes, default 64 [ 0.282953] cpufreq-nforce2: No nForce2 chipset. [ 0.283079] audit: initializing netlink socket (disabled) [ 0.283087] type=2000 audit(1306243037.280:1): initialized [ 0.292389] highmem bounce pool size: 64 pages [ 0.292394] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.301734] VFS: Disk quotas dquot_6.5.2 [ 0.301786] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.302373] fuse init (API version 7.16) [ 0.302452] msgmni has been set to 1678 [ 0.302651] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.302674] io scheduler noop registered [ 0.302675] io scheduler deadline registered [ 0.302690] io scheduler cfq registered (default) [ 0.302811] pcieport 0000:00:04.0: setting latency timer to 64 [ 0.302836] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X [ 0.302873] pcieport 0000:00:15.0: setting latency timer to 64 [ 0.302894] pcieport 0000:00:15.0: irq 41 for MSI/MSI-X [ 0.302957] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.302981] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.303129] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.303134] ACPI: Power Button [PWRB] [ 0.303192] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.303195] ACPI: Power Button [PWRF] [ 0.303424] ACPI: acpi_idle registered with cpuidle [ 0.304961] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.304966] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND (20110112/psparse-536) [ 0.305460] ERST: Table is not found! [ 0.305517] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.325874] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.325941] isapnp: Scanning for PnP cards... [ 0.440064] Freeing initrd memory: 12516k freed [ 0.678542] isapnp: No Plug & Play device found [ 0.852485] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.852725] ACPI Error: [HPTF] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.852730] ACPI Error: Method parse/execution failed [\_SB_.PCI0.HPET._CRS] (Node f402ae70), AE_NOT_FOUND (20110112/psparse-536) [ 0.852746] Linux agpgart interface v0.103 [ 0.854084] brd: module loaded [ 0.854607] loop: module loaded [ 0.854693] i2c-core: driver [adp5520] using legacy suspend method [ 0.854694] i2c-core: driver [adp5520] using legacy resume method [ 0.854832] pata_acpi 0000:00:0c.0: setting latency timer to 64 [ 0.855004] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 0.855015] pata_acpi 0000:00:0d.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.855033] pata_acpi 0000:00:0d.0: setting latency timer to 64 [ 0.855040] pata_acpi 0000:00:0d.0: PCI INT A disabled [ 0.855185] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 [ 0.855192] pata_acpi 0000:00:0d.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 0.855205] pata_acpi 0000:00:0d.1: setting latency timer to 64 [ 0.855212] pata_acpi 0000:00:0d.1: PCI INT B disabled [ 0.855356] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21 [ 0.855362] pata_acpi 0000:00:0d.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21 [ 0.855375] pata_acpi 0000:00:0d.2: setting latency timer to 64 [ 0.855382] pata_acpi 0000:00:0d.2: PCI INT C disabled [ 0.855393] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001) [ 0.855534] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16 [ 0.855541] pata_acpi 0000:03:00.1: PCI INT B -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16 [ 0.855558] pata_acpi 0000:03:00.1: setting latency timer to 64 [ 0.855569] pata_acpi 0000:03:00.1: PCI INT B disabled [ 0.855934] Fixed MDIO Bus: probed [ 0.855973] PPP generic driver version 2.4.2 [ 0.856032] tun: Universal TUN/TAP device driver, 1.6 [ 0.856034] tun: (C) 1999-2004 Max Krasnyansky [ 0.856115] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.856263] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 [ 0.856270] ehci_hcd 0000:00:0a.1: PCI INT B -> Link[APCL] -> GSI 20 (level, low) -> IRQ 20 [ 0.856282] ehci_hcd 0000:00:0a.1: setting latency timer to 64 [ 0.856284] ehci_hcd 0000:00:0a.1: EHCI Host Controller [ 0.856320] ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1 [ 0.860069] ehci_hcd 0000:00:0a.1: debug port 1 [ 0.860077] ehci_hcd 0000:00:0a.1: cache line size of 32 is not supported [ 0.860096] ehci_hcd 0000:00:0a.1: irq 20, io mem 0xfd107000 [ 0.872022] ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00 [ 0.872153] hub 1-0:1.0: USB hub found [ 0.872157] hub 1-0:1.0: 10 ports detected [ 0.872245] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.872430] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 0.872434] ohci_hcd 0000:00:0a.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23 [ 0.872449] ohci_hcd 0000:00:0a.0: setting latency timer to 64 [ 0.872452] ohci_hcd 0000:00:0a.0: OHCI Host Controller [ 0.872493] ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 2 [ 0.872541] ohci_hcd 0000:00:0a.0: irq 23, io mem 0xfd106000 [ 0.930123] hub 2-0:1.0: USB hub found [ 0.930129] hub 2-0:1.0: 10 ports detected [ 0.930216] uhci_hcd: USB Universal Host Controller Interface driver [ 0.930288] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.930667] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.930673] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.930797] mousedev: PS/2 mouse device common for all mice [ 0.930916] rtc_cmos 00:05: RTC can wake from S4 [ 0.944133] device-mapper: uevent: version 1.0.3 [ 0.944209] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 0.944294] device-mapper: multipath: version 1.2.0 loaded [ 0.944296] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.944390] EISA: Probing bus 0 at eisa.0 [ 0.944393] EISA: Cannot allocate resource for mainboard [ 0.944395] Cannot allocate resource for EISA slot 1 [ 0.944397] Cannot allocate resource for EISA slot 2 [ 0.944399] Cannot allocate resource for EISA slot 3 [ 0.944401] Cannot allocate resource for EISA slot 4 [ 0.944403] Cannot allocate resource for EISA slot 5 [ 0.944405] Cannot allocate resource for EISA slot 6 [ 0.944407] Cannot allocate resource for EISA slot 7 [ 0.944409] Cannot allocate resource for EISA slot 8 [ 0.944410] EISA: Detected 0 cards. [ 0.944500] cpuidle: using governor ladder [ 0.944502] cpuidle: using governor menu [ 0.944751] TCP cubic registered [ 0.944865] NET: Registered protocol family 10 [ 0.945350] NET: Registered protocol family 17 [ 0.945365] Registering the dns_resolver key type [ 0.945387] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (2 cpu cores) (version 2.20.00) [ 0.945425] powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0xa [ 0.945427] powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xc [ 0.945429] powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xe [ 0.945431] powernow-k8: 3 : fid 0xc (2000 MHz), vid 0x10 [ 0.945433] powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10 [ 0.945435] powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12 [ 0.945488] Using IPI No-Shortcut mode [ 0.945571] PM: Hibernation image not present or could not be loaded. [ 0.945581] registered taskstats version 1 [ 0.945832] Magic number: 11:893:281 [ 0.945857] tty tty18: hash matches [ 0.945886] /build/buildd/linux-2.6.38/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.945889] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.945890] EDD information not available. [ 0.945974] Freeing unused kernel memory: 700k freed [ 0.946291] Write protecting the kernel text: 5192k [ 0.946330] Write protecting the kernel read-only data: 2148k [ 0.965861] <30>udev[64]: starting version 167 [ 1.047435] pata_amd 0000:00:0c.0: version 0.4.1 [ 1.047477] pata_amd 0000:00:0c.0: setting latency timer to 64 [ 1.064165] pata_jmicron 0000:03:00.1: PCI INT B -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16 [ 1.064205] pata_jmicron 0000:03:00.1: setting latency timer to 64 [ 1.076100] scsi1 : pata_jmicron [ 1.081778] scsi0 : pata_amd [ 1.081901] scsi2 : pata_jmicron [ 1.081964] ata3: PATA max UDMA/100 cmd 0x8000 ctl 0x8400 bmdma 0x9000 irq 16 [ 1.081967] ata4: PATA max UDMA/100 cmd 0x8800 ctl 0x8c00 bmdma 0x9008 irq 16 [ 1.083671] scsi3 : pata_amd [ 1.084118] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 1.084121] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 1.084167] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.084317] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 1.084322] forcedeth 0000:00:10.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22 [ 1.084326] forcedeth 0000:00:10.0: setting latency timer to 64 [ 1.087983] ahci 0000:03:00.0: version 3.0 [ 1.088793] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16 [ 1.088797] ahci 0000:03:00.0: PCI INT A -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16 [ 1.104052] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.104057] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.104062] ahci 0000:03:00.0: setting latency timer to 64 [ 1.104504] scsi4 : ahci [ 1.104587] scsi5 : ahci [ 1.104643] ata5: SATA max UDMA/133 abar m8192@0xfd000000 port 0xfd000100 irq 16 [ 1.104646] ata6: SATA max UDMA/133 abar m8192@0xfd000000 port 0xfd000180 irq 16 [ 1.184023] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 1.252316] ata1.00: ATAPI: _NEC DVD_RW ND-3540A, 1.WB, max UDMA/33 [ 1.252325] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13) [ 1.268257] ata1.00: configured for UDMA/33 [ 1.404239] scsi 0:0:0:0: CD-ROM _NEC DVD_RW ND-3540A 1.WB PQ: 0 ANSI: 5 [ 1.405550] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 1.405553] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.405675] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.405736] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.405818] ata2: port disabled. ignoring. [ 1.424033] ata5: SATA link down (SStatus 0 SControl 300) [ 1.424063] ata6: SATA link down (SStatus 0 SControl 300) [ 1.427190] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 1.427203] firewire_ohci 0000:02:0e.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 1.480091] firewire_ohci: Added fw-ohci device 0000:02:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [ 1.480409] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 1.480415] aic7xxx 0000:02:07.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 [ 1.608682] forcedeth 0000:00:10.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:16:e6:83:9b:ce [ 1.608686] forcedeth 0000:00:10.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 [ 1.608884] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21 [ 1.608889] forcedeth 0000:00:11.0: PCI INT A -> Link[AMC1] -> GSI 21 (level, low) -> IRQ 21 [ 1.608893] forcedeth 0000:00:11.0: setting latency timer to 64 [ 1.875858] usbcore: registered new interface driver uas [ 1.880589] Initializing USB Mass Storage driver... [ 1.880681] scsi7 : usb-storage 1-2:1.0 [ 1.880791] usbcore: registered new interface driver usb-storage [ 1.880793] USB Mass Storage support registered. [ 1.980100] firewire_core: created device fw0: GUID 0016e60000b8b7fe, S400 [ 1.984031] usb 1-3: new high speed USB device using ehci_hcd and address 3 [ 2.131602] scsi8 : usb-storage 1-3:1.0 [ 2.132705] forcedeth 0000:00:11.0: ifname eth1, PHY OUI 0x5043 @ 2, addr 00:16:e6:82:8d:4f [ 2.132709] forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 [ 2.132729] sata_nv 0000:00:0d.0: version 3.5 [ 2.132743] sata_nv 0000:00:0d.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 2.132747] sata_nv 0000:00:0d.0: Using SWNCQ mode [ 2.133493] sata_nv 0000:00:0d.0: setting latency timer to 64 [ 2.133933] scsi9 : sata_nv [ 2.134041] scsi10 : sata_nv [ 2.134164] ata7: SATA max UDMA/133 cmd 0xa000 ctl 0xa400 bmdma 0xb000 irq 23 [ 2.134167] ata8: SATA max UDMA/133 cmd 0xa800 ctl 0xac00 bmdma 0xb008 irq 23 [ 2.134184] sata_nv 0000:00:0d.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 2.134187] sata_nv 0000:00:0d.1: Using SWNCQ mode [ 2.134910] sata_nv 0000:00:0d.1: setting latency timer to 64 [ 2.135891] scsi11 : sata_nv [ 2.136130] scsi12 : sata_nv [ 2.136392] ata9: SATA max UDMA/133 cmd 0xb400 ctl 0xb800 bmdma 0xc400 irq 22 [ 2.136395] ata10: SATA max UDMA/133 cmd 0xbc00 ctl 0xc000 bmdma 0xc408 irq 22 [ 2.136418] sata_nv 0000:00:0d.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21 [ 2.136421] sata_nv 0000:00:0d.2: Using SWNCQ mode [ 2.137145] sata_nv 0000:00:0d.2: setting latency timer to 64 [ 2.138090] scsi13 : sata_nv [ 2.138313] scsi14 : sata_nv [ 2.138569] ata11: SATA max UDMA/133 cmd 0xc800 ctl 0xcc00 bmdma 0xd800 irq 21 [ 2.138572] ata12: SATA max UDMA/133 cmd 0xd000 ctl 0xd400 bmdma 0xd808 irq 21 [ 2.240021] usb 1-7: new high speed USB device using ehci_hcd and address 4 [ 2.448033] ata9: SATA link down (SStatus 0 SControl 300) [ 2.448036] ata11: SATA link down (SStatus 0 SControl 300) [ 2.600044] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.621982] ata7.00: HPA detected: current 625140335, native 625142448 [ 2.621988] ata7.00: ATA-7: WDC WD3200KS-00PFB0, 21.00M21, max UDMA/133 [ 2.621991] ata7.00: 625140335 sectors, multi 16: LBA48 NCQ (depth 1) [ 2.636306] ata7.00: configured for UDMA/133 [ 2.636447] scsi 9:0:0:0: Direct-Access ATA WDC WD3200KS-00P 21.0 PQ: 0 ANSI: 5 [ 2.636628] sd 9:0:0:0: Attached scsi generic sg1 type 0 [ 2.636646] sd 9:0:0:0: [sda] 625140335 512-byte logical blocks: (320 GB/298 GiB) [ 2.636706] sd 9:0:0:0: [sda] Write Protect is off [ 2.636709] sd 9:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.636728] sd 9:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.664617] sda: sda1 sda2 sda3 [ 2.664916] sd 9:0:0:0: [sda] Attached SCSI disk [ 2.887267] scsi 7:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 2.887808] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 2.890002] sd 7:0:0:0: [sdb] Attached SCSI removable disk [ 2.948027] ata8: SATA link down (SStatus 0 SControl 300) [ 2.956025] usb 2-8: new low speed USB device using ohci_hcd and address 2 [ 3.132146] scsi 8:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2 [ 3.132723] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 3.138259] sd 8:0:0:0: [sdc] Attached SCSI removable disk [ 3.264025] ata10: SATA link down (SStatus 0 SControl 300) [ 3.488021] usb 2-10: new low speed USB device using ohci_hcd and address 3 [ 3.576023] ata12: SATA link down (SStatus 0 SControl 300) [ 3.591023] input: Microsoft Microsoft Wheel Mouse Optical® as /devices/pci0000:00/0000:00:0a.0/usb2/2-8/2-8:1.0/input/input2 [ 3.591138] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®] on usb-0000:00:0a.0-8/input0 [ 3.591160] usbcore: registered new interface driver usbhid [ 3.591162] usbhid: USB HID core driver [ 3.744092] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:0a.0/usb2/2-10/2-10:1.0/input/input3 [ 3.744185] generic-usb 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:0a.0-10/input0 [ 3.759685] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:0a.0/usb2/2-10/2-10:1.1/input/input4 [ 3.759767] generic-usb 0003:045E:00DD.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:0a.0-10/input1 [ 3.982032] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 16.090136] <30>udev[381]: starting version 167 [ 16.121772] lp: driver loaded but no devices found [ 16.205517] Adding 3245124k swap on /dev/sda3. Priority:-1 extents:1 across:3245124k [ 16.235290] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 16.308000] i2c i2c-0: nForce2 SMBus adapter at 0x1c00 [ 16.308075] i2c i2c-1: nForce2 SMBus adapter at 0x1c80 [ 16.309623] parport_pc 00:09: reported by Plug and Play ACPI [ 16.309669] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 16.310864] NV_TCO: NV TCO WatchDog Timer Driver v0.01 [ 16.310973] NV_TCO: Watchdog reboot not detected. [ 16.311947] NV_TCO: initialized (0x1440). heartbeat=30 sec (nowayout=0) [ 16.378617] type=1400 audit(1306243053.375:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=636 comm="apparmor_parser" [ 16.378633] type=1400 audit(1306243053.375:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=649 comm="apparmor_parser" [ 16.378947] type=1400 audit(1306243053.375:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=636 comm="apparmor_parser" [ 16.378960] type=1400 audit(1306243053.375:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=649 comm="apparmor_parser" [ 16.379152] type=1400 audit(1306243053.375:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=636 comm="apparmor_parser" [ 16.379173] type=1400 audit(1306243053.375:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=649 comm="apparmor_parser" [ 16.379642] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 16.400172] lp0: using parport0 (interrupt-driven). [ 16.488034] scsi6 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 [ 16.488036] [ 16.488037] aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs [ 16.488038] [ 16.520959] Linux video capture interface: v2.00 [ 16.542574] nvidia: module license 'NVIDIA' taints kernel. [ 16.542579] Disabling lock debugging due to kernel taint [ 16.567061] uvcvideo: Found UVC 1.00 device (046d:0807) [ 16.587181] input: UVC Camera (046d:0807) as /devices/pci0000:00/0000:00:0a.1/usb1/1-7/1-7:1.0/input/input5 [ 16.587304] usbcore: registered new interface driver uvcvideo [ 16.587306] USB Video Class driver (v1.0.0) [ 16.670212] ppdev: user-space parallel port driver [ 16.681355] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 16.796283] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20 [ 16.796290] HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20 [ 16.796293] hda_intel: Disable MSI for Nvidia chipset [ 16.796319] HDA Intel 0000:00:0e.1: setting latency timer to 64 [ 17.028208] usbcore: registered new interface driver snd-usb-audio [ 17.136191] type=1400 audit(1306243054.135:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=950 comm="apparmor_parser" [ 17.138015] type=1400 audit(1306243054.135:9): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=949 comm="apparmor_parser" [ 17.138708] type=1400 audit(1306243054.135:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=950 comm="apparmor_parser" [ 17.138918] type=1400 audit(1306243054.135:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=950 comm="apparmor_parser" [ 17.238662] forcedeth 0000:00:10.0: irq 42 for MSI/MSI-X [ 17.242933] forcedeth 0000:00:11.0: irq 43 for MSI/MSI-X [ 17.243122] forcedeth 0000:00:11.0: eth1: no link during initialization [ 17.243743] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 17.766320] kvm: Nested Virtualization enabled [ 17.832148] Bridge firewalling registered [ 17.873297] ip_tables: (C) 2000-2006 Netfilter Core Team [ 17.907301] nvidia 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16 [ 17.907309] nvidia 0000:01:00.0: setting latency timer to 64 [ 17.907314] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 17.908355] NVRM: loading NVIDIA UNIX x86 Kernel Module 270.41.06 Mon Apr 18 14:54:25 PDT 2011