Activity log for bug #782092

Date Who What changed Old value New value Message
2011-05-13 09:44:32 Martin Konôpka bug added bug
2011-05-13 09:44:32 Martin Konôpka attachment added what top utility reports https://bugs.launchpad.net/bugs/782092/+attachment/2126667/+files/top_report
2011-05-16 21:48:53 Clint Byrum bug added subscriber Clint Byrum
2011-05-16 21:49:06 Clint Byrum bug task added linux (Ubuntu)
2011-05-16 21:49:25 Clint Byrum openssh (Ubuntu): status New Incomplete
2011-07-18 23:51:50 Brad Figg linux (Ubuntu): status New Incomplete
2011-07-19 08:23:20 Martin Konôpka tags amd64 apport-bug maverick amd64 apport-bug apport-collected maverick
2011-07-19 08:23:21 Martin Konôpka description I describe the issue in few steps below. 1.) I want to transfer files from machine A (with ubuntu 11.04, but this is not important) to machine B (ubuntu 10.10; this is important to say) using scp. 2.) Machine B is under constant computational load due to a user program (a simulation) such that most of its CPU power is consumed by the program but it uses less then half of total (12 GB) memory and there is not any significant usage of disk and no other application is running. (Even no user logged into a GNOME session.) 3.) I issue the command scp on machine A; I immediatelly get prompt to give password. However the transfer does not start immediatelly after that. I must wait for some time, say half a minute or even full minute or more (I have not measured it.) just to see the start of the tranfer. Few additional remarks: Until recently machine B had had installed ubuntu 10.04 (Lucid Lynx, 64-bit) and there was no such problem even at higher computational loads. Similarly there was no such problem even in more distant past when the machine was running under Linux Mint Helena (based upon Ubuntu 9.10). The long delays when doing scp occur if machine B was not exposed to an scp or ssh demand for a longer period of time. (Typically I face the problem in the morning when.) If an scp transfer is finally accomplished then I can start a new one which already works without delay. Machine B is equipped with an Intel i7 CPU, 12 GB of DDR3 and it is a quite powerful workstation. All cores of CPU are set to run at maximum frequency. I attach a file with content shown by the program top. (Grabbed in situation when a user is logged into GNOME session.) ProblemType: Bug DistroRelease: Ubuntu 10.10 Package: openssh-server 1:5.5p1-4ubuntu5 ProcVersionSignature: Ubuntu 2.6.35-28.50-generic 2.6.35.11 Uname: Linux 2.6.35-28-generic x86_64 Architecture: amd64 Date: Fri May 13 10:39:53 2011 InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release amd64 (20101007) ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, user) LANG=en_GB.utf8 SHELL=/bin/bash SourcePackage: openssh I describe the issue in few steps below. 1.) I want to transfer files from machine A (with ubuntu 11.04, but this is not important) to machine B (ubuntu 10.10; this is important to say) using scp. 2.) Machine B is under constant computational load due to a user program (a simulation) such that most of its CPU power is consumed by the program but it uses less then half of total (12 GB) memory and there is not any significant usage of disk and no other application is running. (Even no user logged into a GNOME session.) 3.) I issue the command scp on machine A; I immediatelly get prompt to give password. However the transfer does not start immediatelly after that. I must wait for some time, say half a minute or even full minute or more (I have not measured it.) just to see the start of the tranfer. Few additional remarks: Until recently machine B had had installed ubuntu 10.04 (Lucid Lynx, 64-bit) and there was no such problem even at higher computational loads. Similarly there was no such problem even in more distant past when the machine was running under Linux Mint Helena (based upon Ubuntu 9.10). The long delays when doing scp occur if machine B was not exposed to an scp or ssh demand for a longer period of time. (Typically I face the problem in the morning when.) If an scp transfer is finally accomplished then I can start a new one which already works without delay. Machine B is equipped with an Intel i7 CPU, 12 GB of DDR3 and it is a quite powerful workstation. All cores of CPU are set to run at maximum frequency. I attach a file with content shown by the program top. (Grabbed in situation when a user is logged into GNOME session.) ProblemType: Bug DistroRelease: Ubuntu 10.10 Package: openssh-server 1:5.5p1-4ubuntu5 ProcVersionSignature: Ubuntu 2.6.35-28.50-generic 2.6.35.11 Uname: Linux 2.6.35-28-generic x86_64 Architecture: amd64 Date: Fri May 13 10:39:53 2011 InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release amd64 (20101007) ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, user) LANG=en_GB.utf8 SHELL=/bin/bash SourcePackage: openssh --- AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23. Architecture: amd64 AudioDevicesInUse: USER PID ACCESS COMMAND /dev/snd/controlC0: konopka 12733 F.... pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xd7ff8000 irq 73' Mixer name : 'Analog Devices AD1989B' Components : 'HDA:11d4989b,10438372,00100300' Controls : 48 Simple ctrls : 27 DistroRelease: Ubuntu 10.10 HibernationDevice: RESUME=UUID=c49e29ce-51d0-4841-ba53-2277847b7096 InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release amd64 (20101007) IwConfig: lo no wireless extensions. eth0 no wireless extensions. eth1 no wireless extensions. MachineType: System manufacturer System Product Name Package: openssh ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.35-30-generic root=UUID=ed65d6b9-ca7c-4627-808f-b9f882327a13 ro quiet splash ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, user) LANG=en_GB.utf8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 2.6.35-30.54-generic 2.6.35.13 Regression: Yes RelatedPackageVersions: linux-firmware 1.38.6 Reproducible: Yes RfKill: Tags: maverick kernel-config regression-release needs-upstream-testing Uname: Linux 2.6.35-30-generic x86_64 UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare WifiSyslog: dmi.bios.date: 11/12/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0704 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: P6T DELUXE V2 dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0704:bd11/12/2009:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP6TDELUXEV2:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer
2011-07-19 08:23:23 Martin Konôpka attachment added AcpiTables.txt https://bugs.edge.launchpad.net/bugs/782092/+attachment/2216695/+files/AcpiTables.txt
2011-07-19 08:23:25 Martin Konôpka attachment added AlsaDevices.txt https://bugs.edge.launchpad.net/bugs/782092/+attachment/2216696/+files/AlsaDevices.txt
2011-07-19 08:23:27 Martin Konôpka attachment added AplayDevices.txt https://bugs.edge.launchpad.net/bugs/782092/+attachment/2216697/+files/AplayDevices.txt
2011-07-19 08:23:29 Martin Konôpka attachment added ArecordDevices.txt https://bugs.edge.launchpad.net/bugs/782092/+attachment/2216698/+files/ArecordDevices.txt
2011-07-19 08:23:31 Martin Konôpka attachment added BootDmesg.txt https://bugs.edge.launchpad.net/bugs/782092/+attachment/2216699/+files/BootDmesg.txt
2011-07-19 08:23:32 Martin Konôpka attachment added Card0.Amixer.values.txt https://bugs.edge.launchpad.net/bugs/782092/+attachment/2216700/+files/Card0.Amixer.values.txt
2011-07-19 08:23:34 Martin Konôpka attachment added Card0.Codecs.codec.0.txt https://bugs.edge.launchpad.net/bugs/782092/+attachment/2216701/+files/Card0.Codecs.codec.0.txt
2011-07-19 08:23:36 Martin Konôpka attachment added CurrentDmesg.txt https://bugs.edge.launchpad.net/bugs/782092/+attachment/2216702/+files/CurrentDmesg.txt
2011-07-19 08:23:37 Martin Konôpka attachment added Lspci.txt https://bugs.edge.launchpad.net/bugs/782092/+attachment/2216703/+files/Lspci.txt
2011-07-19 08:23:39 Martin Konôpka attachment added Lsusb.txt https://bugs.edge.launchpad.net/bugs/782092/+attachment/2216704/+files/Lsusb.txt
2011-07-19 08:23:40 Martin Konôpka attachment added PciMultimedia.txt https://bugs.edge.launchpad.net/bugs/782092/+attachment/2216706/+files/PciMultimedia.txt
2011-07-19 08:23:42 Martin Konôpka attachment added ProcCpuinfo.txt https://bugs.edge.launchpad.net/bugs/782092/+attachment/2216707/+files/ProcCpuinfo.txt
2011-07-19 08:23:44 Martin Konôpka attachment added ProcInterrupts.txt https://bugs.edge.launchpad.net/bugs/782092/+attachment/2216708/+files/ProcInterrupts.txt
2011-07-19 08:23:46 Martin Konôpka attachment added ProcModules.txt https://bugs.edge.launchpad.net/bugs/782092/+attachment/2216709/+files/ProcModules.txt
2011-07-19 08:23:47 Martin Konôpka attachment added UdevDb.txt https://bugs.edge.launchpad.net/bugs/782092/+attachment/2216710/+files/UdevDb.txt
2011-07-19 08:23:49 Martin Konôpka attachment added UdevLog.txt https://bugs.edge.launchpad.net/bugs/782092/+attachment/2216711/+files/UdevLog.txt
2011-07-19 08:47:12 Martin Konôpka linux (Ubuntu): status Incomplete New
2011-07-19 08:47:21 Martin Konôpka openssh (Ubuntu): status Incomplete New
2011-07-19 08:51:33 Brad Figg linux (Ubuntu): status New Confirmed
2011-07-19 12:06:31 Dave Walker openssh (Ubuntu): importance Undecided Medium
2012-04-21 21:29:56 penalvch tags amd64 apport-bug apport-collected maverick amd64 apport-bug apport-collected maverick needs-upstream-testing
2012-04-21 21:30:56 penalvch linux (Ubuntu): status Confirmed Incomplete
2012-04-21 23:19:59 penalvch bug task deleted openssh (Ubuntu)
2012-04-21 23:20:26 penalvch linux (Ubuntu): status Incomplete Invalid